Development of a highly thermostable, adjuvanted human papillomavirus vaccine

Can prophylactic HPV vaccination reduce the recurrence of cervical lesions after surgery? Review and prospect

Women with HSIL typically undergo conization/LEEP to remove cervical lesions, but the risk of HSIL lesions returning after surgical treatment remains higher than in the general population. HPV vaccination is essential to prevent cervical cancer. However, the effect of prophylactic HPV vaccination on reducing the risk of recurrent cervical lesions after surgical treatment remains unclear. This review aims to analyze and summarize the latest literature on the role of prophylactic HPV vaccine in reducing the recurrence of cervical lesions after surgery in patients with HSIL, and to review and update the history, efficacy, effectiveness and safety of HPV vaccine, focusing on the current status of global HPV vaccine implementation and obstacles.

A Single Dose, Thermostable, Trivalent Human Papillomavirus Vaccine Formulated Using Atomic Layer Deposition

Formulations of human papillomavirus (HPV) 16, 18, and 31 L1 capsomere protein antigens were spray dried to obtain glassy microspheres that were then coated by atomic layer deposition (ALD) with nanometer-thin protective layers of alumina. Spray-drying was used to formulate human papillomavirus (HPV) 16, 18, and 31 L1 capsomere protein antigens within glassy microspheres to which nanoscopic protective layers of alumina were applied using ALD. Suspensions of alumina-coated, capsomere-containing microparticles were administered in a single dose to mice. ALD-deposited alumina coatings provided thermostability and a delayed in vivo release of capsomere antigens, incorporating both a prime and a boost dose in one injection. Total serotype-specific antibody titers as well as neutralizing titers determined from pseudovirus infectivity assays were unaffected by incubation of the ALD-coated vaccines for at 4, 50, or 70 °C for three months prior to administration. In addition, even after incubation for three months at 70 °C, single doses of ALD-coated vaccines produced both higher total antibody responses and higher neutralizing responses than control immunizations that used two doses of conventional liquid formulations stored at 4 °C.

Updates on HPV Vaccination

Cervical cancer still poses a significant global challenge. Developed countries have mitigated this challenge by the introduction of structured screening programmes and, more recently, the HPV vaccine. Countries that have successfully introduced national HPV vaccination programmes are on course for cervical cancer elimination in a few decades. In developing countries that lack structured screening and HPV vaccination programmes, cervical cancer remains a major cause of morbidity and mortality. The HPV vaccine is key to addressing the disproportionate distribution of cervical cancer incidence, with much to be gained from increasing vaccine coverage and uptake globally. This review covers the history and science of the HPV vaccine, its efficacy, effectiveness and safety, and some of the considerations and challenges posed to the achievement of global HPV vaccination coverage and the consequent elimination of cervical cancer.

Vaccine cold chain management and cold storage technology to address the challenges of vaccination programs

The outbreaks of infectious diseases that spread across countries have generally existed for centuries. An example is the occurrence of the COVID-19 pandemic in 2020, which led to the loss of lives and economic depreciation. One of the essential ways of handling the spread of viruses is the discovery and administration of vaccines. However, the major challenges of vaccination programs are associated with the vaccine cold chain management and cold storage facilities. This paper discusses how vaccine cold chain management and cold storage technology can address the challenges of vaccination programs. Specifically, it examines different systems for preserving vaccines in either liquid or frozen form to help ensure that they are not damaged during distribution from manufacturing facilities. Furthermore, A vaccine is likely to provide very low efficacy when it is not properly stored. According to preliminary studies, the inability to store vaccine properly is partly due to the incompetency of many stakeholders, especially in technical matters. The novelty of this study is to thoroughly explore cold storage technology for a faster and more comprehensive vaccine distribution hence it is expected to be one of the reference and inspiration for stakeholders.

Exploring the role of nanomedicines for the therapeutic approach of central nervous system dysfunction: At a glance

In recent decades, research scientists, molecular biologists, and pharmacologists have placed a strong emphasis on cutting-edge nanostructured materials technologies to increase medicine delivery to the central nervous system (CNS). The application of nanoscience for the treatment of neurodegenerative diseases (NDs) such as Alzheimer’s disease (AD), Parkinson’s disease (PD), multiple sclerosis (MS), Huntington’s disease (HD), brain cancer, and hemorrhage has the potential to transform care. Multiple studies have indicated that nanomaterials can be used to successfully treat CNS disorders in the case of neurodegeneration. Nanomedicine development for the cure of degenerative and inflammatory diseases of the nervous system is critical. Nanoparticles may act as a drug transporter that can precisely target sick brain sub-regions, boosting therapy success. It is important to develop strategies that can penetrate the blood–brain barrier (BBB) and improve the effectiveness of medications. One of the probable tactics is the use of different nanoscale materials. These nano-based pharmaceuticals offer low toxicity, tailored delivery, high stability, and drug loading capacity. They may also increase therapeutic effectiveness. A few examples of the many different kinds and forms of nanomaterials that have been widely employed to treat neurological diseases include quantum dots, dendrimers, metallic nanoparticles, polymeric nanoparticles, carbon nanotubes, liposomes, and micelles. These unique qualities, including sensitivity, selectivity, and ability to traverse the BBB when employed in nano-sized particles, make these nanoparticles useful for imaging studies and treatment of NDs. Multifunctional nanoparticles carrying pharmacological medications serve two purposes: they improve medication distribution while also enabling cell dynamics imaging and pharmacokinetic study. However, because of the potential for wide-ranging clinical implications, safety concerns persist, limiting any potential for translation. The evidence for using nanotechnology to create drug delivery systems that could pass across the BBB and deliver therapeutic chemicals to CNS was examined in this study.

New Perspectives in Therapeutic Vaccines for HPV: A Critical Review

Human Papillomavirus is the main cause of cervical cancer, including squamous cell carcinoma of the oropharynx, anus, rectum, penis, vagina, and vulva. In recent years, considerable effort has been made to control HPV-induced diseases using either prophylactic or therapeutic approaches. A critical review of the literature about the therapeutic Human Papillomavirus vaccine was performed to analyze its efficacy in the treatment of female lower genital tract lesions and its possible perspective application in clinical practice. The most important medical databases were consulted, and all papers published from 2000 until 2021 were considered. We retrieved a group of seven papers, reporting the role of anti HPV therapeutic vaccines against the L2 protein in the order of their efficacy and safety in female lower genital tract disease. In addition, the immune response due to vaccine administration was evaluated. The development of therapeutic vaccines represents an interesting challenge for the treatment of HPV infection of the lower genital tract. Literature data underline that the L2 protein may be an interesting and promising target in the development of therapeutic HPV vaccines, but the possible strengths and the unclear longevity of L2 immune responses are factors to be considered before clinical use.

Biopolymers and Osmolytes - A Focus towards the Prospects of Stability and Adjuvanticity of Vaccines

‘New-Gen Vaccines’ are grabbing the attention of scientists as they are much suitable for an immune-compromised group of individuals as well as infants. The major drawbacks of these vaccines are lower immunogenicity and instability. The need for a convenient and safe adjuvant is still under exploration. On the other hand, thermal instability leads to the inactivation of the vaccine and becomes detrimental in many cases. Thus, there is a need to incorporate new kinds of excipients into vaccine formulation to enhance the potency/immunogenicity of vaccine antigens and also act as stabilizers. A limited or single excipient in providing the required dual-activity is vital to break the stereotypical usage of the well-entrenched adverse ingredients. In the proposed review, the efficiency of naturally occurring biocompatible carbohydrate polymers and osmolytes and their ‘dual-role’ is briefed. In addition, the information on the possible mechanisms of action of carbohydrate polymers in vaccines as adjuvants and stabilizers are also discussed.

Nanotechnology-enabled immunoengineering approaches to advance therapeutic applications

Immunotherapy has reached clinical success in the last decade, with the emergence of new and effective treatments such as checkpoint blockade therapy and CAR T-cell therapy that have drastically improved patient outcomes. Still, these therapies can be improved to limit off-target effects, mitigate systemic toxicities, and increase overall efficacies. Nanoscale engineering offers strategies that enable researchers to attain these goals through the manipulation of immune cell functions, such as enhancing immunity against cancers and pathogens, controlling the site of immune response, and promoting tolerance via the delivery of small molecule drugs or biologics. By tuning the properties of the nanomaterials, such as size, shape, charge, and surface chemistry, different types of immune cells can be targeted and engineered, such as dendritic cells for immunization, or T cells for promoting adaptive immunity. Researchers have come to better understand the critical role the immune system plays in the progression of pathologies besides cancer, and developing nanoengineering approaches that seek to harness the potential of immune cell activities can lead to favorable outcomes for the treatment of injuries and diseases.

Microparticles entrapping pneumococcal protein SP0845 show improved immunogenicity and temperature stability

Protein based vaccines are the most safe and affordable strategy to combat pneumococcal disease circumventing the limitations of conventional polysaccharide-based vaccines like serotype dependence, high cost and inability to be administered to immunocompromised. SP0845 is a highly conserved vaccine candidate shown to provide protection against heterologous strains of Streptococcus pneumoniae, the primal cause of pneumonia. However, the associated poor immunogenicity warrants the need for adjuvants and multiple doses to mount desired responses. The present study relates to improve the immunogenicity of pneumococcal protein SP0845 by use of poly lactic acid biodegradable polymer microparticles. The immunization studies showed that microparticles elicited higher antibody response compared to alum adjuvanted protein and this immunopotentiation was achieved without the use of any additional adjuvant. They were also capable of eliciting secondary antibody response upon boosting after four months. Further, the particles upon storage at 25 and 37 °C for one month were still capable of mounting an immune response equivalent to those stored in cold chain. Thus, using microparticles entrapping SP0845 for immunization not only improve the immunogenicity but also offer better temperature stability. This can greatly reduce the cost and increase access of protein-based vaccine to resource limited settings.

Single-vial filovirus glycoprotein vaccines: Biophysical characteristics and immunogenicity after co-lyophilization with adjuvant

Zaire ebolavirus (EBOV), Sudan ebolavirus (SUDV), and Marburg marburgvirus (MARV) are the most prevalent and pathogenic species of filovirus. Previously, we showed that glycoprotein antigens from each virus could be lyophilized to create thermostable monovalent subunit vaccines. However, cross-protection is not expected from the monovalent vaccines and therefore developing a trivalent filovirus vaccine would be desirable. Subunit protein vaccines often require the addition of an adjuvant to sufficiently boost the immunogenicity. Typically, liquid suspensions or emulsions of adjuvants and lyophilized antigens are stored in separate vials to avoid destabilizing interactions and are only mixed immediately before administration. Herein, we describe the development and characterization of monovalent and trivalent filovirus vaccines that are co-lyophilized with a squalane-in-water emulsion adjuvant. We found that the single-vial presentation retained adjuvant particle diameter and zeta potential after lyophilization and reconstitution. Furthermore, the trivalent vaccines elicited high antibody levels against all three antigens in mice and non-human primates. These results advance the prospect of developing a single-vial trivalent filovirus vaccine, which would enable easier distribution and administration of the vaccine to resource-poor areas.

Thermostability of a trivalent, capsomere-based vaccine for human papillomavirus infection

Currently licensed vaccines require a cold-chain to maintain efficacy. This cold-chain requirement reduces the availability of vaccines in resource-poor areas of the world. Commercially available human papillomavirus (HPV) vaccines protect against the most common HPV types related to cervical cancer; however, their impact is limited in many regions due to cold-chain requirements. The goal of this study was to test the thermostability of an adjuvanted, trivalent HPV L1 capsomere-based vaccine (containing HPV types 16, 18, and 31) that was formulated by using lyophilization to embed the antigens within a solid, glassy matrix. Thermal stabilities were determined by storing the vaccine formulations for 3 months at 50 °C, followed by immunization of BALB/c mice and measurement of antibody responses. Antibody responses to capsomere vaccines formulated with alum were unchanged after storage for 3 months at 50 °C. Neutralizing responses to these vaccines were unchanged by high-temperature storage, and were equivalent to those generated after administration of the commercially available liquid HPV vaccine Gardasil®9.

Improvement of RG1-VLP vaccine performance in BALB/c mice by substitution of alhydrogel with the next generation polyphosphazene adjuvant PCEP

Current human papillomavirus (HPV) vaccines provide substantial protection against the most common HPV types responsible for oral and anogenital cancers, but many circulating cancer-causing types remain for which vaccine coverage is lacking. In addition, all current HPV vaccines rely on aluminum salt-based adjuvant formulations that function through unclear mechanisms with few substitutes available. In an effort to expand the toolbox of available adjuvants suitable for HPV vaccines, we compared the immunogenicity of the RG1-VLP (virus-like particle) vaccine in BALB/c mice when formulated with either the aluminum hydroxide adjuvant Alhydrogel or the novel polyphosphazene macromolecular adjuvant poly[di (carboxylatoethylphenoxy) phosphazene] (PCEP). PCEP-formulated RG1-VLPs routinely outperformed VLP/Alhydrogel in several measurements of VLP-specific humoral immunity, including consistent improvements in the magnitude of antibody (Ab) responses to both HPV16-L1 and the L2 RG1 epitope as well as neutralizing titers to HPV16 and cross-neutralization of pseudovirion (PsV) types HPV18 and HPV39. Dose-sparing studies indicated that RG1-VLPs could be reduced in dose by 75% and the presence of PCEP ensured activity comparable to a full VLP dose adjuvanted by Alhydrogel. In addition, levels of HPV16-L1 and -L2-specific Abs were achieved after two vaccinations with PCEP as adjuvant that were equivalent to or greater than levels achieved with three vaccinations with Alhydrogel alone, indicating that the presence of PCEP resulted in accelerated immune responses that could allow for a decreased dose schedule. Given the extensive clinical track record of polyphosphazenes, these data suggest that substitution of alum-based adjuvants with PCEP for the RG1-VLP vaccine could lead to rapid seropositivity requiring fewer boosts, the dose-sparing of commercial VLP-based vaccines, and the establishment of longer-lasting humoral responses to HPV.

Development of thermostable vaccine adjuvants

INTRODUCTION

The importance of vaccine thermostability has been discussed in the literature. Nevertheless, the challenge of developing thermostable vaccine adjuvants has sometimes not received appropriate emphasis. Adjuvants comprise an expansive range of particulate and molecular compositions, requiring innovative thermostable formulation and process development approaches.

AREAS COVERED

Reports on efforts to develop thermostable adjuvant-containing vaccines have increased in recent years, and substantial progress has been made in enhancing the stability of the major classes of adjuvants. This narrative review summarizes the current status of thermostable vaccine adjuvant development and looks forward to the next potential developments in the field.

EXPERT OPINION

As adjuvant-containing vaccines become more widely used, the unique challenges associated with developing thermostable adjuvant formulations merit increased attention. In particular, more focused efforts are needed to translate promising proof-of-concept technologies and formulations into clinical products.

Stability of lyophilized and spray dried vaccine formulations

Liquid formulations of vaccines are subject to instabilities that result from degradation processes that proceed via a variety of physical and chemical pathways. In dried formulations, such as those prepared by lyophilization or spray drying, many of these degradation pathways may be avoided or inhibited. Thus, the stability of vaccine formulations can be enhanced significantly in the absence of bulk water. Potential advantages of dry vaccine formulations include extended shelf lives and less stringent cold-chain storage requirements, both of which offer possibilities of reduced vaccine wastage and facilitated distribution to resource-poor areas. Lyophilization and spray drying represent the most common methods of stabilizing vaccines through drying. This article reviews several lyophilized and spray dried vaccines that address a diverse set of pathogens, as well as some of the assays used to quantify their stability. Recent dry vaccine trends include needle-free delivery of dry powder via non-parenteral routes of administration and the incorporation of advanced vaccine adjuvants into formulations, which further contribute to the goal of increasing vaccine distribution to resource-poor areas. Challenges associated with development of these newer technologies are also discussed.

RG1-VLP and Other L2-Based, Broad-Spectrum HPV Vaccine Candidates

Licensed human papillomavirus (HPV) vaccines contain virus-like particles (VLPs) self-assembled from L1 major-capsid proteins that are remarkably effective prophylactic immunogens. However, the induced type-restricted immune response limits coverage to the included vaccine types, and costly multiplex formulations, restrictive storage and distribution conditions drive the need for next generation HPV vaccines. Vaccine candidates based upon the minor structural protein L2 are particularly promising because conserved N-terminal epitopes induce broadly cross-type neutralizing and protective antibodies. Several strategies to increase the immunological potency of such epitopes are being investigated, including concatemeric multimers, fusion to toll-like receptors ligands or T cell epitopes, as well as immunodominant presentation by different nanoparticle or VLP structures. Several promising L2-based vaccine candidates have reached or will soon enter first-in-man clinical studies. RG1-VLP present the HPV16L2 amino-acid 17–36 conserved neutralization epitope “RG1” repetitively and closely spaced on an immunodominant surface loop of HPV16 L1-VLP and small animal immunizations provide cross-protection against challenge with all medically-significant high-risk and several low-risk HPV types. With a successful current good manufacturing practice (cGMP) campaign and this promising breadth of activity, even encompassing cross-neutralization of several cutaneous HPV types, RG1-VLP are ready for a first-in-human clinical study. This review aims to provide a general overview of these candidates with a special focus on the RG1-VLP vaccine and its road to the clinic.

Enabling Lyophilized Pneumococcal Conjugate Vaccines Through Formulation Design and Excipient Selection Suitable for A Multivalent Adjuvanted Vaccine

Despite a consistent benefit of existing pneumococcal conjugate vaccine (PCV) on invasive pneumococcal disease and pneumonia across different epidemiological settings a tremendous gap exists towards global PCV coverage. Currently, no lyophilized dosage form exists in the PCV global vaccine marketplace and currently licensed vaccines target some, but not all relevant serotypes of Streptococcus pneumoniae. The development of lyophilized presentations of an adjuvanted multivalent vaccine formulation that aligns with the evolving epidemiological assessment of the pneumococcal disease offers broader coverage with distinct cold chain and thermostability advantages. To make progress towards this goal, we evaluated the feasibility of developing new formulation to enable a lyophilized adjuvanted PCV vaccine containing 15 different serotypes. Our findings successfully demonstrate a formulation design space that enables enhanced physical stability which controls vaccine agglomeration, preserves in-vitro vaccine potency, maintains PCV antigen adsorption, and yields elegant lyophilized cakes with acceptable clinically relevant reconstitution times. This research also demonstrates the benefit of utilizing specific vaccine formulation excipients and the effectiveness of excipient combinations that may be beneficial for other multivalent adjuvant containing vaccines to enable novel lyophilized formulations necessary for improved global vaccine access.

Single-administration, thermostable human papillomavirus vaccines prepared with atomic layer deposition technology

Cold-chain requirements affect worldwide distribution of many vaccines. In addition, vaccines requiring multiple doses impose logistical and financial burdens, as well as patient compliance barriers. To address such limitations, we have developed new technologies to prepare thermostable, single-shot, prime-boost microparticle vaccines. Antigen/adjuvant formulations containing glass-forming polymers and trehalose first are spray-dried to form glassy microparticles that confer thermostability. Atomic layer deposition (ALD) reactions conducted in fluidized beds are then used to coat the microparticles with defined numbers of molecular layers of alumina that modulate the timed release of the internalized antigen and act as adjuvants. We have used a model HPV16 L1 capsomere antigen to evaluate the properties of these technologies. Thermostabilized powders containing HPV16 L1 capsomeres were prepared by spray-drying, coated by ALD with up to 500 molecular layers of alumina, and injected into mice. Antigen distribution was assessed by live-animal IR dye tracking of injected labeled antigen. Antibody responses were measured weekly by ELISA, and neutralizing antibodies were measured by pseudovirus neutralization assays at selected time points. Thermostability was evaluated by measuring antibody responses after incubating ALD-coated antigen powders for one month at 50 °C. Single doses of the ALD-coated vaccine formulations elicited a prime-boost immune response, and produced neutralizing responses and antibody titers that were equivalent or superior to conventional prime-boost doses of liquid formulations. Antibody titers were unaffected by month-long incubation of the formulations at 50 °C. Single-dose, thermostable antigen preparations may overcome current limitations in HPV vaccine delivery as well as being widely applicable to other antigens.

Different types of adjuvants in prophylactic and therapeutic human papillomavirus vaccines in laboratory animals: a systematic review

Human papillomavirus (HPV) causes cervical carcinoma, which and is the third most common cancer, accounting for 275,000 deaths annually worldwide. Adjuvants have a key role in promotion of vaccine efficacy; therefore, using prophylactic and therapeutic vaccines combined with adjuvant could be of great benefit in prevention and treatment of cervical cancer. There are different types of adjuvants, including MF59^TM adjuvants, RNA-based, JY (interleukin2/chitosan), cholera toxin (CT), heat-labile enterotoxin (LT), Freund's adjuvant, alum, SA-4-1BBL, λ-carrageenan (λ-CGN), heat shock proteins (HSPs), juzen-taiho-to (JTT) and hochu-ekki-to (HET), ISCOM and ISCOMATRIX™, very small size proteoliposomes (VSSPs), granulocyte macrophage colony-stimulating factor (GM-CSF), and Toll-like receptors (TLRs). Adjuvants have various functions, especially in therapeutic vaccines, and they lead to an increase in cytotoxic T lymphocytes (CTLs), so they are important in the design of vaccines. Here, we review the currently used adjuvants and their combinations with HPV protein vaccines in order to introduce an appropriate adjuvant for HPV vaccines.

Dose finding for new vaccines: The role for immunostimulation/immunodynamic modelling

Current methods to optimize vaccine dose are purely empirically based, whereas in the drug development field, dosing determinations use far more advanced quantitative methodology to accelerate decision-making. Applying these established methods in the field of vaccine development may reduce the currently large clinical trial sample sizes, long time frames, high costs, and ultimately have a better potential to save lives. We propose the field of immunostimulation/immunodynamic (IS/ID) modelling, which aims to translate mathematical frameworks used for drug dosing towards optimizing vaccine dose decision-making. Analogous to Pharmacokinetic/Pharmacodynamic (PK/PD) modelling, the mathematical description of drug distribution (PK) and effect (PD) in host, IS/ID modelling approaches apply mathematical models to describe the underlying mechanisms by which the immune response is stimulated by vaccination (IS) and the resulting measured immune response dynamics (ID). To move IS/ID modelling forward, existing datasets and further data on vaccine allometry and dose-dependent dynamics need to be generated and collate, requiring a collaborative environment with input from academia, industry, regulators, governmental and non-governmental agencies to share modelling expertise, and connect modellers to vaccine data.

Thermostable Ebola virus vaccine formulations lyophilized in the presence of aluminum hydroxide

No United States Food and Drug Administration-licensed vaccines protective against Ebola virus (EBOV) infections are currently available. EBOV vaccine candidates currently in development, as well as most currently licensed vaccines in general, require transport and storage under a continuous cold chain in order to prevent potential decreases in product efficacy. Cold chain requirements are particularly difficult to maintain in developing countries. To improve thermostability and reduce costly cold chain requirements, a subunit protein vaccine against EBOV was formulated as a glassy solid using lyophilization. Formulations of the key antigen, Ebola glycoprotein (EBOV-GP), adjuvanted with microparticulate aluminum hydroxide were prepared in liquid and lyophilized forms, and the vaccines were incubated at 40 °C for 12 weeks. Aggregation and degradation of EBOV-GP were observed in liquid formulations during the 12-week incubation period, whereas changes were minimal in lyophilized formulations. Antibody responses against EBOV-GP following three intramuscular immunizations in BALB/c mice were used to determine vaccine immunogenicity. EBOV-GP formulations were equally immunogenic in liquid and lyophilized forms. After lyophilization and reconstitution, adjuvanted vaccine formulations produced anti-EBOV-GP IgG antibody responses in mice similar to those generated against corresponding adjuvanted liquid vaccine formulations. More importantly, antibody responses in mice injected with reconstituted lyophilized vaccine formulations that had been incubated at 40 °C for 12 weeks prior to injection indicated that vaccine immunogenicity was fully retained after high-temperature storage, showing promise for future vaccine development efforts.

Advances in Designing and Developing Vaccines, Drugs and Therapeutic Approaches to Counter Human Papilloma Virus

Human papillomavirus (HPV) is a viral infection with skin-to-skin based transmission mode. HPV annually caused over 500,000 cancer cases including cervical, anogenital and oropharyngeal cancer among others. HPV vaccination has become a public-health concern, worldwide, to prevent the cases of HPV infections including precancerous lesions, cervical cancers, and genital warts especially in adolescent female and male population by launching national programs with international alliances. Currently, available prophylactic and therapeutic vaccines are expensive to be used in developing countries for vaccination programs. The recent progress in immunotherapy, biotechnology, recombinant DNA technology and molecular biology along with alternative and complementary medicinal systems have paved novel ways and valuable opportunities to design and develop effective prophylactic and therapeutic vaccines, drugs and treatment approach to counter HPV effectively. Exploration and more researches on such advances could result in the gradual reduction in the incidences of HPV cases across the world. The present review presents a current global scenario and futuristic prospects of the advanced prophylactic and therapeutic approaches against HPV along with recent patents coverage of the progress and advances in drugs, vaccines and therapeutic regimens to effectively combat HPV infections and its cancerous conditions.

Using vaccine Immunostimulation/Immunodynamic modelling methods to inform vaccine dose decision-making

Unlike drug dose optimisation, mathematical modelling has not been applied to vaccine dose finding. We applied a novel Immunostimulation/Immunodynamic mathematical modelling framework to translate multi-dose TB vaccine immune responses from mice, to predict most immunogenic dose in humans. Data were previously collected on IFN-γ secreting CD4+ T cells over time for novel TB vaccines H56 and H1 adjuvanted with IC31 in mice (1 dose groups (0.1-1.5 and 15 μg H56 + IC31), 45 mice) and humans (1 dose (50 μg H56/H1 + IC31), 18 humans). A two-compartment mathematical model, describing the dynamics of the post-vaccination IFN-γ T cell response, was fitted to mouse and human data, separately, using nonlinear mixed effects methods. We used these fitted models and a vaccine dose allometric scaling assumption, to predict the most immunogenic human dose. Based on the changes in model parameters by mouse H56 + IC31 dose and by varying the H56 dose allometric scaling factor between mouse and humans, we established that, at a late time point (224 days) doses of 0.8-8 μg H56 + IC31 in humans may be the most immunogenic. A 0.8-8 μg of H-series TB vaccines in humans, may be as, or more, immunogenic, as larger doses. The Immunostimulation/Immunodynamic mathematical modelling framework is a novel, and potentially revolutionary tool, to predict most immunogenic vaccine doses, and accelerate vaccine development.

Opportunities and challenges for human papillomavirus vaccination in cancer

The discovery of genotype 16 as the prototype oncogenic human papillomavirus (HPV) initiated a quarter century of laboratory and epidemiological studies that demonstrated their necessary, but not sufficient, aetiological role in cervical and several other anogenital and oropharyngeal cancers. Early virus-induced immune deviation can lead to persistent subclinical infection that brings the risk of progression to cancer. Effective secondary prevention of cervical cancer through cytological and/or HPV screening depends on regular and widespread use in the general population, but coverage is inadequate in low-resource settings. The discovery that the major capsid antigen L1 could self-assemble into empty virus-like particles (VLPs) that are both highly immunogenic and protective led to the licensure of several prophylactic VLP-based HPV vaccines for the prevention of cervical cancer. The implementation of vaccination programmes in adolescent females is underway in many countries, but their impact critically depends on the population coverage and is improved by herd immunity. This Review considers how our expanding knowledge of the virology and immunology of HPV infection can be exploited to improve vaccine technologies and delivery of such preventive strategies to maximize reductions in HPV-associated disease, including incorporation of an HPV vaccine covering oncogenic types within a standard multitarget paediatric vaccine.

Economic impact of thermostable vaccines

BACKGROUND

While our previous work has shown that replacing existing vaccines with thermostable vaccines can relieve bottlenecks in vaccine supply chains and thus increase vaccine availability, the question remains whether this benefit would outweigh the additional cost of thermostable formulations.

METHODS

Using HERMES simulation models of the vaccine supply chains for the Republic of Benin, the state of Bihar (India), and Niger, we simulated replacing different existing vaccines with thermostable formulations and determined the resulting clinical and economic impact. Costs measured included the costs of vaccines, logistics, and disease outcomes averted.

RESULTS

Replacing a particular vaccine with a thermostable version yielded cost savings in many cases even when charging a price premium (two or three times the current vaccine price). For example, replacing the current pentavalent vaccine with a thermostable version without increasing the vaccine price saved from $366 to $10,945 per 100 members of the vaccine's target population. Doubling the vaccine price still resulted in cost savings that ranged from $300 to $10,706, and tripling the vaccine price resulted in cost savings from $234 to $10,468. As another example, a thermostable rotavirus vaccine (RV) at its current (year) price saved between $131 and $1065. Doubling and tripling the thermostable rotavirus price resulted in cost savings ranging from $102 to $936 and $73 to $808, respectively. Switching to thermostable formulations was highly cost-effective or cost-effective in most scenarios explored.

CONCLUSION

Medical cost and productivity savings could outweigh even significant price premiums charged for thermostable formulations of vaccines, providing support for their use.

The immunogenicity of thin-film freeze-dried, aluminum salt-adjuvanted vaccine when exposed to different temperatures

Insoluble aluminum salts such as aluminum oxyhydroxide have been used for decades as adjuvants in human vaccines, and many vaccines contain aluminum salts as adjuvants. Aluminum salt-adjuvanted vaccines must be managed in cold-chain (2-8° C) during transport and storage, as vaccine antigens in general are too fragile to be stable in ambient temperatures, and unintentional slowing freezing causes irreversible aggregation and permanent damage to the vaccines. Previously, we reported that thin-film freeze-drying can be used to convert vaccines adjuvanted with an aluminum salt from liquid suspension into dry powder without causing particle aggregation or decreasing in immunogenicity following reconstitution. In the present study, using ovalbumin (OVA)-adsorbed Alhydrogel® (i.e. aluminum oxyhydroxide, 2% w/v) as a model vaccine, we showed that the immunogenicity of thin-film freeze-dried OVA-adsorbed Alhydrogel® vaccine powder was not significantly changed after it was exposed for an extended period of time in temperatures as high as 40° C or subjected to repeated slow freezing-and-thawing. It is expected that immunization programs can potentially benefit by integrating thin-film freeze-drying into vaccine preparations.