Recent advances on antimicrobial wound dressing: A review

Advancing burn wound treatment: exploring hydrogel as a transdermal drug delivery system

Burn injuries are prevalent and life-threatening forms that contribute significantly to mortality rates due to associated wound infections. The management of burn wounds presents substantial challenges. Hydrogel exhibits tremendous potential as an ideal alternative to traditional wound dressings such as gauze. This is primarily attributed to its three-dimensional (3D) crosslinked polymer network, which possesses a high water content, fostering a moist environment that supports effective burn wound healing. Additionally, hydrogel facilitates the penetration of loaded therapeutic agents throughout the wound surface, combating burn wound pathogens through the hydration effect and thereby enhancing the healing process. However, the presence of eschar formation on burn wounds obstructs the passive diffusion of therapeutics, impairing the efficacy of hydrogel as a wound dressing, particularly in cases of severe burns involving deeper tissue damage. This review focuses on exploring the potential of hydrogel as a carrier for transdermal drug delivery in burn wound treatment. Furthermore, strategies aimed at enhancing the transdermal delivery of therapeutic agents from hydrogel to optimize burn wound healing are also discussed.

Electrospun nanofibrous scaffolds as a platform to reduce melanoma tumour growth, recurrence, and promote post-resection wound repair

Wound healing following skin tumour surgery still remains a major challenge. To address this issue, polysaccharide-loaded nanofibrous mats have been engineered as skin patches on the wound site to improve wound healing while simultaneously eliminating residual cancer cells which may cause cancer relapse. The marine derived polysaccharides kappa-carrageenan (KCG) and fucoidan (FUC) were blended with polydioxanone (PDX) nanofibers due to their inherent anti-cancer activity conferred by the sulphate groups as well as their immunomodulatory properties which can reduce inflammation resulting in accelerated wound healing. KCG and FUC were released sustainably from the blend nanofibers via the Korsmeyer-Peppas kinetics. MTT assays, live/dead staining and SEM images demonstrated the toxicity of KCG and FUC towards skin cancer MP 41 cells. In addition, MP 41 cells showed reduced metastatic potential when grown on KCG or FUC containing mats. Both KCG and FUC were non- cytotoxic to healthy L 929 fibroblast cells. In vivo studies on healthy Wistar rats confirmed the non-toxicity of the nanofibrous patches as well as their improved and scarless wound healing potential. In vivo studies on tumour xenograft model further showed a reduction of 7.15 % in tumour volume in only 4 days following application of the transdermal patch.

Innovative approaches to wound healing: insights into interactive dressings and future directions

The objective of this review is to provide an up-to-date and all-encompassing account of the recent advancements in the domain of interactive wound dressings. Considering the gap between the achieved and desired clinical outcomes with currently available or under-study wound healing therapies, newer more specific options based on the wound type and healing phase are reviewed. Starting from the comprehensive description of the wound healing process, a detailed classification of wound dressings is presented. Subsequently, we present an elaborate and significant discussion describing interactive (unconventional) wound dressings. Latter includes biopolymer-based, bioactive-containing and biosensor-based smart dressings, which are discussed in separate sections together with their applications and limitations. Moreover, recent (2-5 years) clinical trials, patents on unconventional dressings, marketed products, and other information on advanced wound care designs and techniques are discussed. Subsequently, the future research direction is highlighted, describing peptides, proteins, and human amniotic membranes as potential wound dressings. Finally, we conclude that this field needs further development and offers scope for integrating information on the healing process with newer technologies.

Bioactive Metal Ion-Coordinated Dynamic Hydrogel with Antibacterial, Immunomodulatory, and Angiogenic Activities for Infected Wound Repair

The repair of infected wounds is a complex physiopathologic process. Current studies on infected wound treatment have predominantly focused on infection treatment, while the factors related to delayed healing caused by vascular damage and immune imbalance are commonly overlooked. In this study, an extracellular matrix (ECM)-like dynamic and multifunctional hyaluronic acid (HA) hydrogel with antimicrobial, immunomodulatory, and angiogenic capabilities was designed as wound dressing for the treatment of infected skin wounds. The dynamic network in the hydrogel dressing was based on reversible metal-ligand coordination formed between sulfhydryl groups and bioactive metal ions. In our design, antibacterial silver and immunomodulatory zinc ions were employed to coordinate with sulfhydrylated HA and a vasculogenic peptide. In addition to the desired bioactivities for infected wounds, the hydrogel could also exhibit self-healing and injectable abilities. Animal experiments with infected skin wound models indicated that the hydrogel dressings enabled minimally invasive injection and seamless skin wound covering and then facilitated wound healing by efficient bacterial killing, continuous inflammation inhibition, and improved blood vessel formation. In conclusion, the metal ion-coordinated hydrogels with wound-infection-desired bioactivities and ECM-like dynamic structures represent a class of tissue bionic wound dressings for the treatment of infected and chronic inflammation wounds.

A novel biological antibacterial polyvinyl alcohol/polyionic liquid hydrogel for wound dressing

The release of antibiotics or anions by traditional bacteriostatic agents led to the development of bacterial drug resistance and environmental pollution. Ionic liquids (ILs) have become important choices for antibacterial agents because of their excellent physical, chemical and biological properties. In this paper, the bioactivities of 1-vinyl-3-butylimidazolium chloride ([VBIM]Cl, IL) and poly (1-vinyl-3-butylimidazolium chloride) (P[VBIM]Cl, PIL) were evaluated, and the potential antibacterial material was used to synthesize hydrogels. Using the colony formation assay and the Oxford cup method, antibacterial effect of IL and PIL were tested. Cell-Counting-Kit-8 (CCK-8) experiments were used to study the IC50 (half maximal inhibitory concentration) values of IL and showed 1.47 mg/mL, 0.35 mg/mL and 0.33 mg/mL at 24 h, 48 h and 72 h, respectively. The IC50 value of PIL were 12.15 μg/mL, 12.06 μg/mL and 11.76 μg/mL at 24 h, 48 h and 72 h, respectively. The PIL is further crosslinked with polyvinyl alcohol (PVA) to form a novel hydrogel through freeze-thaw cycles. The newly fabricated hydrogel exhibited a high water content, excellent water absorption properties and outstanding mechanical performance. Using the colony formation assay and the inhibition zone assay, the hydrogels exhibited favorable antibacterial effects (against E.coli and S.aureus) such that nearly 100% of the bacteria were killed in liquid medium while cultivating with H4 (synthesized by 0.5 g PIL and 1g PVA). In addition, the cytotoxicity of PIL was significantly reduced through hydrogen bond crosslinking. H4 showed the highest antibacterial activity and a good biocompatibility. The results indicated that the PVA&PIL hydrogels had great potential for wound dressing.

Biochemical Behavior, Influence on Cell DNA Condition, and Microbiological Properties of Wool and Wool-Copper Materials

The paper presents the study concerning the preparation and physio-chemical and biological properties of wool-copper (WO-Cu) materials obtained by the sputter deposition of copper onto the wool fibers. The WO-Cu material was subjected to physio-chemical and biological investigations. The physio-chemical investigations included the elemental analysis of materials (C, N, O, S, and Cu), their microscopic analysis, and surface properties analysis (specific surface area and total pore volume). The biological investigations consisted of the antimicrobial activity tests of the WO-Cu materials against colonies of Gram-positive (Staphylococcus aureus) bacteria, Gram-negative (Escherichia coli) bacteria, and fungal mold species (Chaetomium globosum). Biochemical-hematological tests included the evaluation of the activated partial thromboplastin time and pro-thrombin time. The tested wool-copper demonstrated the ability to interact with the DNA in a time-dependent manner. These interactions led to the DNA's breaking and degradation. The antimicrobial and antifungal activities of the WO-Cu materials suggest a potential application as an antibacterial/antifungal material. Wool-copper materials may be also used as customized materials where the blood coagulation process could be well controlled through the appropriate copper content.

Dual Functional Antibacterial-Antioxidant Core/Shell Alginate/Poly(ε-caprolactone) Nanofiber Membrane: A Potential Wound Dressing

Core/shell nanofibers offer the advantage of encapsulating multiple drugs with different hydrophilicity in the core and shell, thus allowing for the controlled release of pharmaceutic agents. Specifically, the burst release of hydrophilic drugs from such fiber membranes causes an instantaneous high drug concentration, whereas a long and steady release is usually desired. Herein, we tackle the problem of the initial burst release by the generation of core/shell nanofibers with the hydrophilic antibiotic drug gentamycin loaded within a hydrophilic alginate core surrounded by a hydrophobic shell of poly(ε-caprolactone). Emulsion electrospinning was used as the nanofibrous mesh generation procedure. This process also allows for the loading of a hydrophobic compound, where we selected a natural antioxidant molecule, betulin (BTL), to detoxify the radicals. The resulting nanofibers exhibited a cylindrical shape with a core/shell structure. In vitro tests showed a controlled release of gentamicin from nanofibers via diffusion. The drug reached 93% release in an alginate hydrogel film but only 50% release in the nanofibers, suggesting its potential to minimize the initial burst release. Antibacterial tests revealed significant activity against both Gram-negative and Gram-positive bacteria. The antioxidant property of betulin was confirmed through the DPPH assay, where the incorporation of 20% BTL revealed 37.3% DPPH scavenging. The nanofibers also exhibited favorable biocompatibility in cell culture studies, and no harmful effects on cell viability were observed. Overall, this research offers a promising approach to producing core/shell nanofibrous mats with antibacterial and antioxidant properties, which could effectively address the requirements of wound dressings, including infection prevention and wound healing acceleration.

Covalently grafting polycation to bacterial cellulose for antibacterial and anti-cell adhesive wound dressings

Hydrogel-based wound dressings are becoming increasingly important for wound healing. Bacterial cellulose (BC) has been commonly used as wound dressings due to its good in vitro and in vivo biocompatibility. However, pure BC does not possess antibacterial properties. In this regard, polycation gel was grafted onto the BC using a surface-initiated activator regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP) with subsequent quaternization for antibacterial wound dressing. Dimethylethyl methacrylate (DMAEMA) was successfully polymerized on the BC surface which was confirmed by Fourier transform infrared spectroscopy and elemental analysis. The morphology structure, specific surface area, pore size, and mechanical properties were also characterized. The quaternized PDMAEMA grafted on the BC endowed it with excellent antibacterial activity against E. coli (Gram-negative) and S. aureus (Gram-positive) with a killing rate of 89.2 % and 93.4 %, respectively. The number of cells was significantly reduced on QPD/BC hydrogel, demonstrating its good anti-adhesion ability. In vitro cellular evaluation revealed that the antibacterial wound dressing exhibited good biocompatibility. Overall, this study provides a feasible method to develop antibacterial and anti-cell adhesive hydrogel, which has a promising potential for wound healing.

Chitosan-based GOx@Co-MOF composite hydrogel: A promising strategy for enhanced antibacterial and wound healing effects

A novel composite hydrogel was synthesized via Schiff base reaction between chitosan and di-functional poly(ethylene glycol) (DF-PEG), incorporating glucose oxidase (GOx) and cobalt metal-organic frameworks (Co-MOF). The resulting CS/PEG/GOx@Co-MOF composite hydrogel was characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and energy-dispersive X-ray spectroscopy (EDS). The results confirmed successful integration and uniform distribution of Co-MOF within the hydrogel matrix. Functionally, the hydrogel exploits the catalytic decomposition of glucose by GOx to generate gluconic acid and hydrogen peroxide (H2O2), while Co-MOF gradually releases metal ions and protects GOx. This synergy enhanced the antibacterial activity of the composite hydrogel against both Gram-positive (S. aureus) and Gram-negative bacteria (E. coli), outperforming conventional chitosan-based hydrogels. The potential of the composite hydrogel in treating wound infections was evaluated through antibacterial and wound healing experiments. Overall, CS/PEG/GOx@Co-MOF hydrogel holds great promise for the treatment of wound infections, paving the way for further research and potential clinical applications.

A study of the effect of natural brown cotton gauze on the healing of infected wounds

BACKGROUND

Medical dressings are designed to promote wound healing and reduce infection. The aim of project is to investigate the effect of natural brown colored cotton dressings on the healing of infected wounds in E.coli animals.

MATERIALS AND METHODS

In this study, degreased white cotton gauze was used as the control group, with degreased brown cotton gauze and degreased bleached brown cotton gauze as the experimental group 1 and experimental group 2, to investigate the effect on the repair of post-infectious wound damage in animals by establishing an infected wound model in rats with E.coli as the infecting organism.

RESULTS

The ability to promote healing of infected wounds was investigated by analyzing the wound healing status, macroscopic wound healing rate, hematoxylin-eosin staining, Masson staining, secretion of inflammatory factors by Elisa assay. The result showed that at day 14 of wound healing, the macroscopic wound healing rate was greater than 98% for all three groups of dressings; the collagen content reached 49.85 ± 5.84% in the experimental group 1 and 53.48 ± 5.32% in the experimental group 2, which was higher than the control group; brown cotton gauze promotes skin wound healing by shortening the inflammatory period in both groups. The expression of three inflammatory factors THF-α, IL-2, and IL-8 and three cytokines MMP-3, MMP-8, and MMP-9 were lower than that of the control group.

CONCLUSIONS

It was found that natural brown cotton gauze has better repairing and promoting healing effect on infected wounds. It opens up the application of natural brown cotton gauze in the treatment of infected wounds.

A critical overview of challenging roles of medicinal plants in improvement of wound healing technology

PURPOSE

Chronic diseases often hinder the natural healing process, making wound infections a prevalent clinical concern. In severe cases, complications can arise, potentially leading to fatal outcomes. While allopathic treatments offer numerous options for wound repair and management, the enduring popularity of herbal medications may be attributed to their perceived minimal side effects. Hence, this review aims to investigate the potential of herbal remedies in efficiently treating wounds, presenting a promising alternative for consideration.

METHODS

A literature search was done including research, reviews, systematic literature review, meta-analysis, and clinical trials considered. Search engines such as Pubmed, Google Scholar, and Scopus were used while retrieving data. Keywords like Wound healing 'Wound healing and herbal combinations', 'Herbal wound dressing', Nanotechnology and Wound dressing were used.

RESULT

This review provides valuable insights into the role of natural products and technology-based formulations in the treatment of wound infections. It evaluates the use of herbal remedies as an effective approach. Various active principles from herbs, categorized as flavonoids, glycosides, saponins, and phenolic compounds, have shown effectiveness in promoting wound closure. A multitude of herbal remedies have demonstrated significant efficacy in wound management, offering an additional avenue for care. The review encompasses a total of 72 studies, involving 127 distinct herbs (excluding any common herbs shared between studies), primarily belonging to the families Asteraceae, Fabaceae, and Apiaceae. In research, rat models were predominantly utilized to assess wound healing activities. Furthermore, advancements in herbal-based formulations using nanotechnology-based wound dressing materials, such as nanofibers, nanoemulsions, nanofiber mats, polymeric fibers, and hydrogel-based microneedles, are underway. These innovations aim to enhance targeted drug delivery and expedite recovery. Several clinical-based experimental studies have already been documented, evaluating the efficacy of various natural products for wound care and management. This signifies a promising direction in the field of wound treatment.

CONCLUSION

In recent years, scientists have increasingly utilized evidence-based medicine and advanced scientific techniques to validate the efficacy of herbal medicines and delve into the underlying mechanisms of their actions. However, there remains a critical need for further research to thoroughly understand how isolated chemicals extracted from herbs contribute to the healing process of intricate wounds, which may have life-threatening consequences. This ongoing research endeavor holds great promise in not only advancing our understanding but also in the development of innovative formulations that expedite the recovery process.

Electrospun wound dressings with antibacterial function: a critical review of plant extract and essential oil incorporation

Among the many different types of wound dressings, nanofiber-based materials produced through electrospinning are claimed to be ideal because of their advantageous intrinsic properties and the feasibility of employing several strategies to load bioactive compounds into their structure. Bioactive compounds with antimicrobial properties have been incorporated into different wound dressings to promote healing as well as prevent and treat bacterial infections. Among these, natural products, such as medicinal plant extracts and essential oils (EOs), have proven particularly attractive thanks to their nontoxic nature, minor side effects, desirable bioactive properties, and favorable effects on the healing process. To this end, the present review provides an exhaustive and up-to-date revision of the most prominent medicinal plant extracts and EOs with antimicrobial properties that have been incorporated into nanofiber-based wound dressings. The most common methods used for incorporating bioactive compounds into electrospun nanofibers include: pre-electrospinning (blend, encapsulation, coaxial, and emulsion electrospinning), post-electrospinning (physical adsorption, chemical immobilization, and layer-by-layer assembly), and nanoparticle loading. Furthermore, a general overview of the benefits of EOs and medicinal plant extracts is presented, describing their intrinsic properties and biotechniques for their incorporation into wound dressings. Finally, the current challenges and safety issues that need to be adequately clarified and addressed are discussed.

Progress in the Preparation and Application of Inulin-Based Hydrogels

Inulin, a natural polysaccharide, has emerged as a promising precursor for the preparation of hydrogels due to its biocompatibility, biodegradability, and structural versatility. This review provides a comprehensive overview of the recent progress in the preparation, characterization, and diverse applications of inulin-based hydrogels. Different synthesis strategies, including physical methods (thermal induction and non-thermal induction), chemical methods (free-radical polymerization and chemical crosslinking), and enzymatic approaches, are discussed in detail. The unique properties of inulin-based hydrogels, such as stimuli-responsiveness, antibacterial activity, and their potential as fat replacers, are highlighted. Special emphasis is given to their promising applications in drug delivery systems, especially for colon-targeted delivery, due to the selective degradation of inulin via colonic microflora. The ability to incorporate both hydrophilic and hydrophobic drugs further expands their therapeutic potential. In addition, the applications of inulin-based hydrogels in responsive materials, the food industry, wound dressings, and tissue engineering are discussed. While significant progress has been achieved, challenges and prospects in optimizing synthesis, improving mechanical properties, and exploring new functionalities are discussed. Overall, this review highlights the remarkable properties of inulin-based hydrogels as a promising class of biomaterials with immense potential in the biomedical, pharmaceutical, and materials science fields.

Green Electrospun Poly(vinyl alcohol)/Gelatin-Based Nanofibrous Membrane by Incorporating 45S5 Bioglass Nanoparticles and Urea for Wound Dressing Applications: Characterization and In Vitro and In Vivo Evaluations

This study reports the fabrication and characterization of poly(vinyl alcohol) (PVA) and gelatin (Gel)-based nanofiber membranes cross-linked with citric acid (CA) by a green electrospinning method in which nano 45S5 bioglass (BG) and urea were incorporated. Various combinations of PVA, gelatin, and BG were prepared, and nanofiber membranes with average fiber diameters between 238 and 595 nm were fabricated. Morphological, chemical, and mechanical properties, porosity, swelling, water retention, and water vapor transmission rate of the fabricated membranes were evaluated. PVA:Gel (90:10), 15% CA, and 3% BG were determined as the optimum blend for nanofiber membrane fabrication via electrospinning. The membrane obtained using this blend was further functionalized with 10% w/w polymer urea coating by the electrospray method following the cross-linking. In vitro biocompatibility tests revealed that the fabricated membranes were all biocompatible except for the one that functionalized with urea. In vivo macroscopic and histopathological analysis results of PVA/Gel/BG and PVA/Gel/BG/Urea treated wounds indicated increased collagenization and vascularization and had an anti-inflammatory effect. Furthermore, careful examination of the in vivo macroscopic results of the PVA/Gel/BG/Urea membrane indicated its potential to decrease uneven scar formation. In conclusion, developed PVA/Gel/BG and PVA/Gel/BG/Urea electrospun membranes with multifunctional and biomimetic features may have the potential to be used as beneficial wound dressings.

Multifunctional antibacterial hydrogels for chronic wound management

Chronic wounds have gradually evolved into a global health challenge, comprising long-term non-healing wounds, local tissue necrosis, and even amputation in severe cases. Accordingly, chronic wounds place a considerable psychological and economic burden on patients and society. Chronic wounds have multifaceted pathogenesis involving excessive inflammation, insufficient angiogenesis, and elevated reactive oxygen species levels, with bacterial infection playing a crucial role. Hydrogels, renowned for their excellent biocompatibility, moisture retention, swelling properties, and oxygen permeability, have emerged as promising wound repair dressings. However, hydrogels with singular functions fall short of addressing the complex requirements associated with chronic wound healing. Hence, current research emphasises the development of multifunctional antibacterial hydrogels. This article reviews chronic wound characteristics and the properties and classification of antibacterial hydrogels, as well as their potential application in chronic wound management.

Infection-Free and Enhanced Wound Healing Potential of Alginate Gels Incorporating Silver and Tannylated Calcium Peroxide Nanoparticles

The treatment of chronic wounds involves precise requirements and complex challenges, as the healing process cannot go beyond the inflammatory phase, therefore increasing the healing time and implying a higher risk of opportunistic infection. Following a better understanding of the healing process, oxygen supply has been validated as a therapeutic approach to improve and speed up wound healing. Moreover, the local implications of antimicrobial agents (such as silver-based nano-compounds) significantly support the normal healing process, by combating bacterial contamination and colonization. In this study, silver (S) and tannylated calcium peroxide (CaO2@TA) nanoparticles were obtained by adapted microfluidic and precipitation synthesis methods, respectively. After complementary physicochemical evaluation, both types of nanoparticles were loaded in (Alg) alginate-based gels that were further evaluated as possible dressings for wound healing. The obtained composites showed a porous structure and uniform distribution of nanoparticles through the polymeric matrix (evidenced by spectrophotometric analysis and electron microscopy studies), together with a good swelling capacity. The as-proposed gel dressings exhibited a constant and suitable concentration of released oxygen, as shown for up to eight hours (UV-Vis investigation). The biofilm modulation data indicated a synergistic antimicrobial effect between silver and tannylated calcium peroxide nanoparticles, with a prominent inhibitory action against the Gram-positive bacterial biofilm after 48 h. Beneficial effects in the human keratinocytes cultured in contact with the obtained materials were demonstrated by the performed tests, such as MTT, LDH, and NO.

Effective antibacterial agents in modern wound dressings: a review

Wound infections are a significant concern in healthcare, leading to long healing times. Traditional approaches for managing wound infections rely heavily on systemic antibiotics, which are associated with the emergence of antibiotic-resistant bacteria. Therefore, the development of alternative antibacterial materials for wound care has gained considerable attention. In today's world, new generations of wound dressing are commonly used to heal wounds. These new dressings keep the wound and the area around it moist to improve wound healing. However, this moist environment can also foster an environment that is favorable for the growth of bacteria. Excessive antibiotic use poses a significant threat to human health and causes bacterial resistance, so new-generation wound dressings must be designed and developed to reduce the risk of infection. Wound dressings using antimicrobial compounds minimize wound bacterial colonization, making them the best way to avoid open wound infection. We aim to provide readers with a comprehensive understanding of the latest advancements in antibacterial materials for wound management.

Stimuli-responsive peptide assemblies: Design, self-assembly, modulation, and biomedical applications

Peptide molecules have design flexibility, self-assembly ability, high biocompatibility, good biodegradability, and easy functionalization, which promote their applications as versatile biomaterials for tissue engineering and biomedicine. In addition, the functionalization of self-assembled peptide nanomaterials with other additive components enhances their stimuli-responsive functions, promoting function-specific applications that induced by both internal and external stimulations. In this review, we demonstrate recent advance in the peptide molecular design, self-assembly, functional tailoring, and biomedical applications of peptide-based nanomaterials. The strategies on the design and synthesis of single, dual, and multiple stimuli-responsive peptide-based nanomaterials with various dimensions are analyzed, and the functional regulation of peptide nanomaterials with active components such as metal/metal oxide, DNA/RNA, polysaccharides, photosensitizers, 2D materials, and others are discussed. In addition, the designed peptide-based nanomaterials with temperature-, pH-, ion-, light-, enzyme-, and ROS-responsive abilities for drug delivery, bioimaging, cancer therapy, gene therapy, antibacterial, as well as wound healing and dressing applications are presented and discussed. This comprehensive review provides detailed methodologies and advanced techniques on the synthesis of peptide nanomaterials from molecular biology, materials science, and nanotechnology, which will guide and inspire the molecular level design of peptides with specific and multiple functions for function-specific applications.

Electrospun nanofibers synthesized from polymers incorporated with bioactive compounds for wound healing

The development of innovative wound dressing materials is crucial for effective wound care. It's an active area of research driven by a better understanding of chronic wound pathogenesis. Addressing wound care properly is a clinical challenge, but there is a growing demand for advancements in this field. The synergy of medicinal plants and nanotechnology offers a promising approach to expedite the healing process for both acute and chronic wounds by facilitating the appropriate progression through various healing phases. Metal nanoparticles play an increasingly pivotal role in promoting efficient wound healing and preventing secondary bacterial infections. Their small size and high surface area facilitate enhanced biological interaction and penetration at the wound site. Specifically designed for topical drug delivery, these nanoparticles enable the sustained release of therapeutic molecules, such as growth factors and antibiotics. This targeted approach ensures optimal cell-to-cell interactions, proliferation, and vascularization, fostering effective and controlled wound healing. Nanoscale scaffolds have significant attention due to their attractive properties, including delivery capacity, high porosity and high surface area. They mimic the Extracellular matrix (ECM) and hence biocompatible. In response to the alarming rise of antibiotic-resistant, biohybrid nanofibrous wound dressings are gradually replacing conventional antibiotic delivery systems. This emerging class of wound dressings comprises biopolymeric nanofibers with inherent antibacterial properties, nature-derived compounds, and biofunctional agents. Nanotechnology, diminutive nanomaterials, nanoscaffolds, nanofibers, and biomaterials are harnessed for targeted drug delivery aimed at wound healing. This review article discusses the effects of nanofibrous scaffolds loaded with nanoparticles on wound healing, including biological (in vivo and in vitro) and mechanical outcomes.

Recent progress of electrospun nanofibers as burning dressings

Burns are a global public health problem, which brings great challenges to public health and the economy. Severe burns often lead to systemic infection, shock, multiple organ failure, and even death. With the increasing demand for the therapeutic effect of burn wounds, traditional dressings have been unable to meet people's needs due to their single function and many side effects. In this context, electrospinning shows a great prospect on the way to open up advanced wound dressings that promote wound repairing and prevent infection. With its large specific surface area, high porosity, and similar to natural extracellular matrix (ECM), electrospun nanofibers can load drugs and accelerate wound healing. It provides a promising solution for the treatment and management of burn wounds. This review article introduces the concept of burn and the types of electrospun nanofibers, then summarizes the polymers used in electrospun nanofiber dressings. Finally, the drugs (plant extracts, small molecule drugs and nanoparticles) loaded with electrospun burn dressings are summarized. Some promising aspects for developing commercial electrospun burn dressings are proposed.

Skin-adhesive and self-healing diagnostic wound dressings for diabetic wound healing recording and electrophysiological signal monitoring

Performing efficient wound management is essential for infected diabetic wounds due to the complex pathology. Flexible electronics have been recognized as one of the promising solutions for wound management. Herein, a kind of skin-adhesive and self-healing flexible bioelectronic was developed, which could be employed as a diagnostic wound dressing to record diabetic wound healing and monitor electrophysiological signals of the patients. The flexible substrate of diagnostic wound dressings showed excellent tissue adhesive (to various substrates including biological samples), self-healing (fracture strength restores by 96%), and intrinsic antibacterial properties (antibacterial ratio >96% against multidrug-resistant bacteria). The diagnostic wound dressings could record the glucose level (1-30 mM), pH values (4-7), and body temperature (18.8-40.0 °C) around the infected diabetic wounds. Besides, the dressings could help optimize treatment strategies based on electrophysiological signals of patients monitored in real-time. This study contributes to developing flexible bioelectronics for the diagnosis and management of diabetic wounds.

Facile fabrication of a novel, photodetachable salecan-based hydrogel dressing with self-healing, injectable, and antibacterial properties based on metal coordination

Achieving the controllable detachment of polysaccharide-based wound dressings is challenging. In this study, a novel, photodetachable salecan-based hydrogel dressing with injectable, self-healing, antibacterial, and wound healing properties was developed using a green and facile approach. A salecan hydrogel with a uniform porous structure and water content of 90.4 % was prepared by simply mixing salecan and an Fe3+-citric acid complexing solution in an acidic D-(+)-glucono-1,5-lactone environment. Metal coordinate interactions were formed between the released Fe3+ ions and carboxyl groups on the salecan polysaccharide, inducing homogeneous gelation. Benefiting from this dynamic and reversible crosslinking, the salecan hydrogel exhibited self-healing and injectable behavior, facilitating the formation of the desired shapes in situ. The exposure of Fe3+-citric acid to UV light (365 nm) resulted in the reduction of Fe3+ to Fe2+ through photochemical reactions, enabling phototriggered detachment. Moreover, the hydrogel exhibited excellent biocompatibility and satisfactory antibacterial efficacy against Escherichia coli and Staphylococcus aureus of 72.5 % and 85.3 %, respectively. The adhesive strength of the salecan hydrogel to porcine skin was 1.06 ± 0.12 kPa. In vivo wound healing experiments further highlighted the advantages of the prepared hydrogel in alleviating the degree of wound inflammation and promoting tissue regeneration within 12 days.

Advanced multifunctional hydrogels for diabetic foot ulcer healing: Active substances and biological functions

AIM

Hydrogels with excellent biocompatibility and biodegradability can be used as the desirable dressings for the therapy of diabetic foot ulcer (DFU). This review aimed to summarize the biological functions of hydrogels, combining with the pathogenesis of DFU.

METHODS

The studies in the last 10 years were searched and summarized from the online database PubMed using a combination of keywords such as hydrogel and diabetes. The biological functions of hydrogels and their healing mechanism on DFU were elaborated.

RESULTS

In this review, hydrogels were classified by their active substances such as drugs, cytokines, photosensitizers, and biomimetic peptide. Based on this, the biological functions of hydrogels were summarized by associating the pathogenesis of DFU, including oxidative stress, chronic inflammation, cell phenotype change, vasculopathy, and infection. This review also pointed out some of the shortcomings of hydrogels in present researches.

CONCLUSIONS

Hydrogels were classified into carrier hydrogels and self-functioning hydrogels in this review. Besides, the functions and components of existing hydrogels were clarified to provide assistance for future researches and clinical applications.

Amikacin sulphate loaded chitosan-diopside nanoparticles composite scaffold for infectious wound healing

A wound dressing material should inhibit infections that may occur at the wound site, and at the same time, it should enhance the healing process. In this study, we developed an amikacin sulphate (AK) incorporated chitosan (Ch) and Diopside nanoparticles composite dressing (Ch-nDE-AK) for controlling wound infection and healing. The diopside nanoparticles (nDE) were prepared using sol-gel synthesis and characterized using XRD, FT-IR, and FESEM. nDE shows a size range of 142 ± 31 nm through FESEM analysis. Later, the developed composite dressing was characterized using SEM, EDS, and FT-IR analysis. Ch-nDE-AK dressing possesses a porous nature that will aid in easy cell infiltration and proliferation. The swelling studies indicated the expansion capability of the scaffold when applied to the injured site. Ch-nDE-AK scaffold showed a 69.6 ± 8.2 % amikacin sulphate release up to 7 days, which indicates the sustained release of the drug from Ch-nDE-AK scaffold. The drug release data was subjected to various kinetics models and was observed to follow the Higuchi model. The scaffold showed antibacterial activity against ATCC strains of S. aureus and E. coli for 7 days by in vitro. Ch-nDE-AK scaffold also showed antibacterial activity against S. aureus and E. coli clinical strains in vitro. The ex vivo antibacterial study confirmed the antibacterial ability of Ch-nDE-AK scaffold against S. aureus and E. coli. Ch-nDE-AK scaffold also exhibits anti-biofilm activity against S. aureus and E. coli. The Ch-nDE-AK scaffold showed cytocompatibility and cell attachment to fibroblast cells. Additionally, the scratch assay using fibroblast cells confirmed the role of the nDE in the scaffold, helping in cell migration. Thus, the developed Ch-nDE-AK dressing can potentially be used to treat infectious wound healing.

Silk fibroin-based dressings with antibacterial and anti-inflammatory properties

Silk fibroin is a fibrillar protein obtained from arthropods such as mulberry and non-mulberry silkworms. Silk fibroin has been used as a dressing in wound treatment for its physical, chemical, mechanical, and biological properties. This systematic review analyzed studies from PubMed, Web of Science, and Scopus databases to identify the molecules preferred for functionalizing silk fibroin-based dressings and to describe their mechanisms of exhibiting anti-inflammatory and antibacterial properties. The analysis of the selected articles allowed us to classify the dressings into different conformations, such as membranes, films, hydrogels, sponges, and bioadhesives. The incorporation of various molecules, including antibiotics, natural products, peptides, nanocomposites, nanoparticles, secondary metabolites, growth factors, and cytokines, has allowed the development of dressings that promote wound healing with antibacterial and immunomodulatory properties. In addition, silk fibroin-based dressings have been established to have the potential to regenerate wounds such as venous ulcers, arterial ulcers, diabetic foot, third-degree burns, and neoplastic ulcers. Evaluation of the efficacy of silk fibroin-based dressings in tissue engineering is an area of great activity that has shown significant advances in recent years.

Technological Interventions Enhancing Curcumin Bioavailability in Wound-Healing Therapeutics

Wound healing has been a challenge in the medical field. Tremendous research has been carried out to expedite wound healing by fabricating various formulations, some of which are now commercially available. However, owing to their natural source, people have been attracted to advanced formulations with herbal components. Among various herbs, curcumin has been the center of attraction from ancient times for its healing properties due to its multiple therapeutic effects, including antioxidant, antimicrobial, anti-inflammatory, anticarcinogenic, neuroprotective, and radioprotective properties. However, curcumin has a low water solubility and rapidly degrades into inactive metabolites, which limits its therapeutic efficacy. Henceforth, a carrier system is needed to carry curcumin, guard it against degradation, and keep its bioavailability and effectiveness. Different formulations with curcumin have been synthesized, and exist in the form of various synthetic and natural materials, including nanoparticles, hydrogels, scaffolds, films, fibers, and nanoemulgels, improving its bioavailability dramatically. This review discusses the advances in different types of curcumin-based formulations used in wound healing in recent times, concentrating on its mechanisms of action and discussing the updates on its application at several stages of the wound healing process. Impact statement Curcumin is a herbal compound extracted from turmeric root and has been used since time immemorial for its health benefits including wound healing. In clinical formulations, curcumin shows low bioavailability, which mainly stems from the way it is delivered in the body. Henceforth, a carrier system is needed to carry curcumin, guard it against degradation, while maintaining its bioavailability and therapeutic efficacy. This review offers an overview of the advanced technological interventions through tissue engineering approaches to efficiently utilize curcumin in different types of wound healing applications.

Hydrogel Loaded with Peptide-Containing Nanocomplexes: Symphonic Cooperation of Photothermal Antimicrobial Nanoparticles and Prohealing Peptides for the Treatment of Infected Wounds

Current treatment for chronic infectious wounds is limited due to severe drug resistance in certain bacteria. Therefore, the development of new composite hydrogels with nonantibiotic antibacterial and pro-wound repair is important. Here, we present a photothermal antibacterial composite hydrogel fabricated with a coating of Fe2+ cross-linked carboxymethyl chitosan (FeCMCS) following the incorporation of melanin nanoparticles (MNPs) and the CyRL-QN15 peptide. Various physical and photothermal properties of the hydrogel were characterized. Cell proliferation, migration, cycle, and free-radical scavenging activity were assessed, and the antimicrobial properties of the hydrogel were probed by photothermal therapy. The effects of the hydrogel were validated in a model of methicillin-resistant Staphylococcus aureus (MRSA) infection with full-thickness injury. This effect was further confirmed by changes in cytokines associated with inflammation, re-epithelialization, and angiogenesis on the seventh day after wound formation. The MNPs demonstrated robust photothermal conversion capabilities. The composite hydrogel (MNPs/CyRL-QN15/FeCMCS) promoted keratinocyte and fibroblast proliferation and migration while exhibiting high antibacterial efficacy, effectively killing more than 95% of Gram-positive and Gram-negative bacteria. In vivo study using an MRSA-infected full-thickness injury model demonstrated good therapeutic efficacy of the hydrogel in promoting regeneration and remodeling of chronically infected wounds by alleviating inflammatory response and accelerating re-epithelialization and collagen deposition. The MNPs/CyRL-QN15/FeCMCS hydrogel showed excellent antibacterial and prohealing effects on infected wounds, indicating potential as a promising candidate for wound healing promotion.

Dual Self-Assembly of Puerarin and Silk Fibroin into Supramolecular Nanofibrillar Hydrogel for Infected Wound Treatment

The treatment of infected wounds remains a challenging biomedical problem. Some bioactive small-molecule hydrogelators with unique rigid structures can self-assemble into supramolecular hydrogels for wound healing. However, they are still suffered from low structural stability and bio-functionality. Herein, a supramolecular hydrogel antibacterial dressing with a dual nanofibrillar network structure is proposed. A nanofibrillar network created by a small-molecule hydrogelator, puerarin extracted from the traditional Chinese medicine Pueraria, is interconnected with a secondary macromolecular silk fibroin nanofibrillar network induced by Ga ions via charge-induced supramolecular self-assembly. The resulting hydrogel features adequate mechanical strength for sustainable retention at wounds. Good biocompatibility and efficient bacterial inhibition are obtained when the Ga ion concentration is 0.05%. Otherwise, the substantial release of Ga ions and puerarin endows the hydrogel with excellent hemostatic and antioxidative properties. In vivo, evaluation of a mouse-infected wound model demonstrates that its healing effect outperformed that of a commercially available silver-containing wound dressing. The experimental group successfully achieves a 100% wound closure rate on day 10. This study sheds new light on the design of nanofibrillar hydrogels based on supramolecular self-assembly of naturally derived bioactive molecules as well as their clinical use for treating chronic infected wounds.

Versatile Mechanically Tunable Hydrogels for Therapeutic Delivery Applications

Hydrogels provide a versatile platform for biomedical material fabrication that can be structurally and mechanically fine-tuned to various tissues and applications. Applications of hydrogels in biomedicine range from highly dynamic injectable hydrogels that can flow through syringe needles and maintain or recover their structure after extrusion to solid-like wound-healing patches that need to be stretchable while providing a selective physical barrier. In this study, a toolbox is designed using thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) polymeric matrices and nanocelluloses as reinforcing agent to obtain biocompatible hydrogels with altering mechanical properties, from a liquid injectable to a solid-like elastic hydrogel. The liquid hydrogels possess low viscosity and shear-thinning properties at 25 °C, which allows facile injection at room temperature, while they become viscoelastic gels at body temperature. In contrast, the covalently cross-linked solid-like hydrogels exhibit enhanced viscoelasticity. The liquid hydrogels are biocompatible and are able to delay the in vitro release and maintain the bioactivity of model drugs. The antimicrobial agent loaded solid-like hydrogels are effective against typical wound-associated pathogens. This work presents a simple method of tuning hydrogel mechanical strength to easily adapt to applications in different soft tissues and broaden the potential of renewable bio-nanoparticles in hybrid biomaterials with controlled drug release capabilities.

Multi-crosslinked hydrogel built with hyaluronic acid-tyramine, thiolated glycol chitosan and copper-doped bioglass nanoparticles for expediting wound healing

The migration of fibroblasts and endothelial cells is a critical determinant of wound-healing outcomes for skin injuries. Here, hyaluronic acid-tyramine (HAT) and thiolated glycol chitosan (TGC) conjugates were combined with copper-doped bioglass (ACuBG) nanoparticles to build a novel type of multi-crosslinked hydrogel for stimulating the migration of cells, and thus, expediting wound healing. The optimally devised HAT/TGC/ACuBG gels had markedly improved strength and stiffness compared to the gels built from either HAT or TGC while showing sufficient elasticity, which contributes to stimulating the migration of fibroblasts. The sustainable release of silicon and copper ions from the gels was found to jointly induce the migration of human umbilical vein endothelial cells. The results based on mouse full-thickness skin defects demonstrated that they were able to fully restore the skin defects with formation of complete appendages within two weeks, suggesting their promising potency for use in expediting wound healing.

Catecholamines polymerization crosslinking for alginate-based burn wound dressings developed with ciprofloxacin and zinc oxide interactions

There is an increasing demand for stable and durable wound dressings to treat burn injuries and infections. Bioactive electrospun nanofibrous mats with antibacterial properties are promising for wound dressing usage. Electrospinning of biopolymers for wound dressing applications needs post-spinning crosslinking to prevent mat dissolution in moist wound environments. Here, we prepared durable wound dressing by using the Dopamine (DA) polymerization crosslinking in Alginate (ALG)/Polyvinyl alcohol (PVA) nanofibrous mats, which are developed by Ciprofloxacin (CIP) and Zinc oxide (ZO). The nanofibrous mats were investigated by FESEM, FTIR, mechanical strength, water contact angle, degradation, degree of swelling, and WVTR tests. The analyses demonstrate the nanofibrous mats with uniform and unbranched fibers, with a hydrophilic nature, which was porous, durable, and stable. Also, it showed the CIP and ZO addition enhanced their durability by crosslinking reinforcement. In addition, the drug release and antibacterial assays demonstrated the pH-sensitive release with more drug release at higher pH (bacterial invasion) and impressive antibacterial activity (up to 99 %). In the burn wound model in rats, the ALG/PVA/DA/CIP/ZO nanofibrous mats displayed excellent wound healing ability in wound closure and tissue regeneration. Also, complete re-epithelization and remodeling and highest collagen synthesis in histological assessment.

Evaluation of the therapeutic effect of a novel bacteriophage in the healing process of infected wounds with Klebsiella pneumoniae in mice

OBJECTIVE

Bacterial wound infections have recently become a threat to public health. The emergence of multidrug-resistant (MDR) strains of Klebsiella pneumoniae highlights the need for a new treatment method. The effectiveness of bacteriophages has been observed for several infections in animal models and human trials. In this study, we assessed the effectiveness of bacteriophages in the treatment of wound infections associated with MDR and biofilm-producing K. pneumoniae and compared its effectiveness with that of gentamicin.

METHODS

A lytic phage against MDR K. pneumoniae was isolated and identified. The effectiveness of phages in the treatment of wound infection in mice was investigated and its effectiveness was compared with gentamicin.

RESULTS

The results showed that the isolated phage belonged to the Drexlerviridae family. This phage acts like gentamicin and effectively eliminates bacteria from wounds. In addition, mice in the phage therapy group were in better physical condition.

CONCLUSION

Our results demonstrated the success of phage therapy in the treatment of mice wounds infected with K. pneumoniae. These results indicate the feasibility of topical phage therapy for the safe treatment of wound infections.

Effect of orodispersible hyaluronic acid film on palatal mucosa wound healing

OBJECTIVE

The objective of the study was to evaluate the healing effect of hyaluronic acid films on palatal wounds.

MATERIALS AND METHODS

After making 5-mm diameter palatal wounds, 72 rats were randomly assigned to three groups: control, hyaluronic acid gel, and hyaluronic acid film. The animals were sacrificed at 3, 7, and 21 days after the experiment. Clinical, histological, and RT-PCR analyses were performed. Human ex vivo oral mucosa models were used. Histological analysis and pan-cytokeratin staining were performed at 5 days after wound creation.

RESULTS

In rat model, both gels and films showed favorable healing on Days 3 and 7 compared with healing in the control (p < 0.05). Film showed remarkable VEGF and α-SMA expression than did the others (p < 0.05). Immunohistochemical analysis showed that film exhibited significantly lower CD68 and greater α-SMA and vimentin expression levels than those in the others (p < 0.05). In human model, re-epithelialization rate of film group was significantly higher than that of the others. Complete epithelial regeneration was confirmed only in film group using pan-cytokeratin staining.

CONCLUSIONS

Within the limits of this study, hyaluronic acid film outperformed gels in terms of palatal wound healing in both models.

Accelerating Full-Thickness Wound Healing with Bacterial Cellulose-Based Multilayer Composites

Materials that speed up wound healing can be of great benefit to patients and healthcare providers. One-layer dressings, however, have unsatisfactory healing efficacy since it is impossible to use materials with different properties simultaneously, and drug delivery is limited by the depth of penetration. The present study utilized a multilayer wound dressing composed of bacterial cellulose (BC) hydrogel, gelatin/alginate (Gel/Alg) hydrogel, and polycaprolactone (PCL) nanofibers loaded with ciprofloxacin (CIP) to promote the healing process in vivo. The designed dressings showed significant water absorption and sufficient water vapor transmission rate (WVTR) after one week, confirming their ability to absorb wound exudate. Within the first four hours, significant amounts of CIP were released from the drug-containing dressing. Then, between hours 4 and 24, the rate decreased and plateaued on day 9. Both positive and negative bacterial strains were inhibited by the gradual release of CIP, while fibroblasts retained their normal morphology and metabolic activity. Lastly, in vivo tests demonstrated that CIP-loaded multilayer dressings could significantly speed up full-thickness wound healing during 14 days, by reducing inflammation, stimulating re-epithelialization, and enhancing skin regeneration. Our findings indicate that multilayering BC hydrogels with drug-loaded nanofibers provide a promising way to promote wound healing by utilizing all the distinctive properties of these layers.

Comparative analysis of genes expression involved in type II toxin-antitoxin system in Staphylococcus aureus following persister cell formation

BACKGROUND

The formation of persister cells is the main reason for persistent infections. They are associated with antibiotic treatment failure and subsequently chronic infection. The study aimed to assess the expression of type II toxin/antitoxin (TA) system genes in persister cells of Staphylococcus aureus in the presence of the following antibiotics vancomycin, ciprofloxacin, and gentamicin in exponential and stationary phases.

METHODS AND RESULTS

The colony count was used to evaluate the effect of different types of antibiotics on S. aureus persister cell formation during exponential and stationary phases. Moreover, the expression level of TA systems and clpP genes in the persister population in exponential and stationary phases were measured by quantitative reverse transcriptase real-time PCR (qRT-PCR). The results of the study showed the presence of persister phenotype of S. aureus strains in the attendance of bactericidal antibiotics in comparison to the control group during the exponential and stationary phases. Moreover, qRT-PCR resulted in the fact that the role of TA systems involved in the persister cell formation depends on the bacterial growth phase and the type of strain and antibiotic.

CONCLUSIONS

In total, the present study provides some data on the persister cell formation and the possible role of TA system genes in this process.

Antioxidant, aroma, and sensory characteristics of Maillard reaction products from Urechis unicinctus hydrolysates: development of food flavorings

To develop food flavorings with a delicious taste and an anti-oxidation effect, in this study, the glucose Maillard reaction was used for hydrolysates of Urechis unicinctus. The various biological activities of Maillard reaction products (MRPs) and their antioxidant capacity were evaluated. The results showed that the unique fishy odor substances of seafood in MRPs were reduced, indicating that the Maillard reaction improved the flavor of the hydrolysate of Urechis unicinctus. Meanwhile, MRPs exhibited more competitive radical scavenging activities compared to the hydrolysate. Moreover, MRPs demonstrated a considerable potential to protect against 2,2'-Azobis (2-methylpropionamidine) dihydrochloride (AAPH)-induced oxidative stress in a cell model in vitro and in a zebrafish model in vivo. Finally, a novel food flavoring was produced with MRPs as raw material, while the sensory qualities were deemed acceptable. In consequence, during industrial production, MRPs of Urechis unicinctus hydrolysate act as a high-quality raw material for functional flavorings and provide an effective way for the utilization of marine resources.

Development of Antioxidant and Antimicrobial Membranes Based on Functionalized and Crosslinked Chitosan for Tissue Regeneration

Tissue engineering is an interdisciplinary field that develops new methods to enhance the regeneration of damaged tissues, including those of wounds. Polymer systems containing bioactive molecules can play an important role in accelerating tissue regeneration, mitigating inflammation process, and fighting bacterial infection. Chitosan (CS) has attracted much attention regarding its use in wound healing system fabrication thanks to its biocompatibility, biodegradability, and the presence of functional groups in its structure. In this work, bioactive chitosan-based membranes were obtained by both chemical and physical modifications of the polymer with glycidyl methacrylate and glycerol (GLY), respectively. The most suitable GLY concentration to obtain wound healing systems with good elongation at break, a good water vapor transmission rate (WVTR), and good wettability values was 20% (w/w). Afterwards, the membranes were crosslinked with different concentrations of ethylene glycol dimethacrylate (EGDMA). By using a concentration of 0.05 mM EGDMA, membranes with a contact angle and WVTR values suitable for the application were obtained. To make the system bioactive, 3,4-dihydrocinnamic acid (HCAF) was introduced into the membranes, either by imbibition or chemical reaction, using laccase as a catalyst. Thermal and mechanical analyses confirmed the formation of a cohesive network, which limited the plasticizing effect of GLY, particularly when HCAF was chemically bound. The HCAF-imbibed membrane showed a good antioxidant and antimicrobial activity, highlighting the potential of this system for the treatment of wound healing.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

Açaí (Euterpe oleracea Mart.) green synthesis of silver nanoparticles: antimicrobial efficacy and ecotoxicological assessment

The synthesis of silver nanoparticles (AgNPs) is usually based on expensive methods that use or generate chemicals that can negatively impact the environment. Our study presents a simple one-step synthesis process for obtaining AgNP using an aqueous extract of Amazonian fruit açai (Euterpe oleracea Mart.) as the reducing and stabilizing agents. The bio-synthesized AgNP (bio-AgNP) were comprehensively characterized by diverse techniques, and as a result, 20-nm spherical particles (transmission electron microscopy) were obtained. X-ray diffraction analysis (XRD) confirmed the presence of crystalline AgNP, and Fourier-transform infrared spectroscopy (FT-IR) suggested that polyphenolic compounds of açaí were present on the surface. The bio-AgNP showed antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Acinetobacter baumannii. In Caenorhabditis elegans exposed to 10 μg/L bio-AgNP for 96 h, there were no significant effects on growth, reproduction, or reactive oxygen species (ROS) concentration; however, there was an increase in superoxide dismutase (SOD) and glutathione-S-transferase (GST) enzymatic activity. In contrast, when worms were exposed to chemically synthesized AgNP (PVP-AgNP), an increase in ROS, SOD, and GST activity and a reduction in oxidative stress resistance were observed. In conclusion, our study not only showcased the potential of açaí in the simple and rapid production of AgNP but also highlighted the broad-spectrum antimicrobial activity of the synthesized nanoparticles using our protocol. Moreover, our findings revealed that these AgNPs exhibited reduced toxicity to C. elegans at environmentally realistic concentrations compared with PVP-AgNP.

The Potential of PIP3 in Enhancing Wound Healing

Given the role of phosphatidylinositol 3,4,5-trisphosphate (PIP3) in modulating cellular processes such as proliferation, survival, and migration, we hypothesized its potential as a novel therapeutic agent for wound closure enhancement. In this study, PIP3 was examined in its free form or as a complex with cationic starch (Q-starch) as a carrier. The intracellular bioactivity and localization of free PIP3 and the Q-starch/PIP3 complexes were examined. Our results present the capability of Q-starch to form complexes with PIP3, facilitate its cellular membrane internalization, and activate intracellular paths leading to enhanced wound healing. Both free PIP3 and Q-starch/PIP3 complexes enhanced monolayer gap closure in scratch assays and induced amplified collagen production within HaCAT and BJ fibroblast cells. Western blot presented enhanced AKT activation by free or complexed PIP3 in BJ fibroblasts in which endogenous PIP3 production was pharmacologically inhibited. Furthermore, both free PIP3 and Q-starch/PIP3 complexes expedited wound closure in mice, after single or daily dermal injections into the wound margins. Free PIP3 and the Q-starch/PIP3 complexes inherently activated the AKT signaling pathway, which is responsible for crucial wound healing processes such as migration; this was also observed in wound assays in mice. PIP3 was identified as a promising molecule for enhancing wound healing, and its ability to circumvent PI3K inhibition suggests possible implications for chronic wound healing.

An Erythrocyte-Templated Iron Single-Atom Nanozyme for Wound Healing

Iron single-atom nanozymes represent a promising artificial enzyme with superior activity owing to uniform active sites that can precisely mimic active center of nature enzymes. However, current synthetic strategies are hard to guarantee each active site at single-atom state. In this work, an erythrocyte-templated strategy by utilizing intrinsic hemin active center of hemoglobin as sing-atom source for nanozyme formation is developed. By combining cell fixation, porous salinization, and high-temperature carbonization, erythrocytes are successfully served as uniform templates to synthesize nanozymes with fully single-atom FeN4 active sites which derived from hemin of hemoglobin, resulting in an enhanced peroxidase (POD)-like activity. Interestingly, the catalytic activity of erythrocyte-templated nanozyme (ETN) shows dependence on animal species, among which murine ETN performed superior catalytic efficiency. In addition, the as-prepared ETNs display a honeycomb-like network structure, serving as a sponge to accelerate hemostasis based on the interactions with prothrombin and fibrinogen. These features enable ETN to effectively kill methicillin-resistant Staphylococcus aureus (MRSA) by combining POD-like catalysis with near-infrared (NIR) induced photothermal effect, and subsequently suitable to promote wound healing. This study provides a proof-of-concept for facile fabrication of multifunctional nanozymes with uniform single-atom active sites by utilizing intrinsic iron structure characteristics of biogenic source like erythrocytes.

Hydrogel dressings with intrinsic antibiofilm and antioxidative dual functionalities accelerate infected diabetic wound healing

Chronic wounds are often infected with biofilm bacteria and characterized by high oxidative stress. Current dressings that promote chronic wound healing either require additional processes such as photothermal irradiation or leave behind gross amounts of undesirable residues. We report a dual-functionality hydrogel dressing with intrinsic antibiofilm and antioxidative properties that are synergistic and low-leaching. The hydrogel is a crosslinked network with tethered antibacterial cationic polyimidazolium and antioxidative N-acetylcysteine. In a murine diabetic wound model, the hydrogel accelerates the closure of wounds infected with methicillin-resistant Staphylococcus aureus or carbapenem-resistant Pseudomonas aeruginosa biofilm. Furthermore, a three-dimensional ex vivo human skin equivalent model shows that N-acetylcysteine promotes the keratinocyte differentiation and accelerates the re-epithelialization process. Our hydrogel dressing can be made into different formats for the healing of both flat and deep infected chronic wounds without contamination of the wound or needing other modalities such as photothermal irradiation.

Bioinspired Zn-MOF doped radial porous chitosan-based sponge with antibacterial and antioxidant properties for rapid hemostasis and wound healing

Herein, a novel bioinspired radial porous zinc-based metal-organic framework (Zn-MOF) doped sodium alginate/chitosan derivatives/pullulan-based SA/PSCS/Pul/Zn-MOF (SPCP/Zn) composites sponge with excellent antioxidant and antibacterial properties was fabricated by the ice-templating method. Boric acid (BA) and Ca2+, which were respectively used as hydrogen- and ionic- bonding cross-linkers, provided strong mechanical properties for sponge matrix composed of SA, PSCS, and Pul. The obtained SPCP/Zn sponge exhibited uniform porous morphology, proper hydrophilicity, and admirable biocompatibility. In addition, the SPCP/Zn sponge achieved a sustained release of Zn2+ and gallic acid, which displayed powerful antibacterial and antioxidant activities. Importantly, the SPCP/Zn sponge exhibited shorter rapid hemostasis (20.4 ± 2.9 s) and lower blood loss (19.8 ± 4.3 mg). The SPCP/Zn sponge also showed faster wound closure ratio for the rat full-thickness skin defect model. It was revealed that SPCP/Zn sponge could significantly accelerate and enhance wound healing through downregulating inflammatory cytokines (TNF-α, IL-6) and increasing the expression of growth factors (VEGF). Due to its excellent properties, the SPCP/Zn sponge may have promising potential in wound healing applications.

Combining Alginate/PVPI-Based Film with Frequency Rhythmic Electrical Modulation System (FREMS) Technology as an Advanced Strategy for Diabetic Wounds

Diabetes is rising as one of the most diffused diseases of the century with the related urgent necessity to face its systemic and local effects on the patients, such as cardiovascular problems, degeneration of limbs, and dysfunction of the wound healing process. The diffusion of leg ulcers has been estimated to be 1.51 for 1000 population, and these non-resolved wounds can produce several social, economic, and mental health issues in diabetic patients. At the same time, these people experience neuropathic pain that causes morbidity and a further decrease in their quality of life. Here, a new study is presented where asodium alginate/Polyvinylpyrrolidone-Iodine complex (PVPI)-based wound dressing is combined with the Frequency Rhythmic Electrical Modulation System (FREMS) technology, an established medical device for the treatment of neuropathic pain and diabetic ulcers. The produced Alginate/PVPI-based films are characterized in terms of morphology, chemistry, wettability, bio-/hemo-compatibility, and clotting capacity. Next, the Alginate/PVPI-based films are used together with FREMS technology in diabetic mice models, and synergism of their action in the wound closure rate and anti-inflammatory properties is found. Hence, how the combination of electrical neurostimulation devices and advanced wound dressings can be a new approach to improve chronic wound treatment is demonstrated.

High-efficiency antibacterial calcium alginate/lysozyme/AgNPs composite sponge for wound healing

Infection poses a significant barrier to effective wound repair, leading to increased inflammatory responses that ultimately result in incomplete and prolonged wound healing. To address this challenge, numerous antibacterial ingredients have been incorporated into dressings to inhibit wound infection. Our previous work demonstrated that lysozyme/silver nanoparticles (LYZ/AgNPs) complexes, prepared using an eco-friendly one-step aqueous method, exhibited excellent antibacterial efficacy with favorable biosafety. To further explore its potential application in advancing wound healing, calcium alginate (CA) with good porosity, water absorption, and water retention capacities was formulated with LYZ/AgNPs to prepare composite sponge (CA/LYZ/AgNPs). As expected, in vivo experiments involving full-thickness skin wound and scald wound healing experiments demonstrated that CA-LYZ-AgNPs composite sponges with excellent biocompatibility exhibited remarkable antibacterial activity against gram-positive bacteria, gram-negative bacteria and fungi, and outperformed the wound healing process efficacy of other commercially available AgNPs-loaded wound dressings. In summary, this work introduces a CA/LYZ/AgNPs sponge featuring exceptional antibacterial efficacy and biocompatibility, thus holding promising potential in wound care applications.

Assessment of antibiotic release and antibacterial efficacy from pendant glutathione hydrogels using ex vivo porcine skin

Acute bacterial skin and skin structure infections (ABSSSIs) confer a substantial burden on the healthcare system. Local antibiotic delivery systems can provide controlled drug release directly to the site of infection to maximize efficacy and minimize systemic toxicity. The purpose of this study was to examine the antibacterial activity of antibiotic-loaded glutathione-conjugated poly(ethylene glycol) hydrogels (GSH-PEG) against ABSSSIs utilizing an ex vivo porcine dermal explant model. Vancomycin- or meropenem-loaded GSH-PEG hydrogels at 3 different dose levels were loaded over 1 h. Drug release was monitored in vitro under submerged conditions, by the Franz cell diffusion method, and ex vivo utilizing a porcine dermis model. Antibacterial activity was assessed ex vivo on porcine dermis explants inoculated with Staphylococcus aureus or Pseudomonas aeruginosa isolates treated with vancomycin- or meropenem-loaded GSH-PEG hydrogels, respectively. Histological assessment of the explants was conducted to evaluate tissue integrity and viability in the context of the experimental conditions. A dose-dependent release was observed from vancomycin and meropenem hydrogels, with in vitro Franz cell diffusion data closely representing ex vivo vancomycin release, but not high dose meropenem release. High dose vancomycin-loaded hydrogels resulted in a >3 log10 clearance against all S. aureus isolates at 48 h. High dose meropenem-loaded hydrogels achieved 6.5, 4, and 2 log10 reductions in CFU/ml against susceptible, intermediate, and resistant P. aeruginosa isolates, respectively. Our findings demonstrate the potential application of GSH-PEG hydrogels for flexible, local antibiotic delivery against bacterial skin infections.

Enhanced healing of wounds that responded poorly to silver dressing by copper wound dressings: Prospective single arm treatment study

Background and Aims

Dressings containing silver ions are an accepted and common option for wound treatment. However, some wounds fail to heal at the desired rate despite optimal management. The aim of the study was to examine the effect of copper dressings in noninfected wounds.

Methods

The study included 20 patients aged 18-85 years with 2-30 cm2 noninfected wounds treated for 17-41 days with silver wound dressings that failed to reduce by >50% the wound size, who were then treated with copper dressings. Ten patients were diabetics, 10 suffered from hypertension, and six suffered from peripheral vascular disease (PVD). Two patients suffered from two wounds. Most were amputation wounds below the knee.

Results

Five patients dropped out from the study due to complications not related to the wound. The mean period of silver and copper dressings treatment was 25.6 and 29.6 days, respectively (p = 0.25; t test). None of the wounds became infected. Comparing a period of 25 days, during the copper dressings treatment, the mean wound area reduction was ~2.4 times higher than during the silver dressing treatment, 87.35 ± 22.4% versus 37.02 ± 25.11% (mean ± SD; p < 0.001; paired t test), respectively. The average decline during the silver and copper treatments were 1.2% and 2.14% per day (p = 0.002; multiple regression analysis), respectively.

Conclusions

The enhanced wound healing process observed with the copper dressings may be explained by the integral role of copper throughout all physiological skin repair processes. Silver in contrast has no physiological role in wound healing. The results of our study confirm case reports showing enhanced wound healing of hard-to-heal wounds with copper dressings, both of infected and noninfected wounds. Taken together, the results of the current study support the hypothesis that the application of copper dressings in situ for noninfected wounds results in the stimulation of the wound healing processes, as opposed to silver dressings.

Preparation and evaluation of oxidized-dextran based on antibacterial hydrogel for synergistic photodynamic therapy

Skin trauma is a widespread, extremely susceptible health issue that affects people all over the world. In this study, an innovative antibacterial hydrogel (ODAA hydrogel) with photosensitizer and antibiotics was developed. Oxidized dextran (ODEX) was used as a carrier to prepare a pH-responsive hydrogel by loading the antibiotic amikacin (AMK) and the photosensitizer hexyl 5-aminolevulinate (HAL) via imine bonds. The ODAA hydrogel has a uniformly distributed cavity structure. The cumulative release rates of HAL and AMK in a simulated inflammatory environment at pH 5.0 were approximately 62.3 % and 71.9 % during 15 days. These results demonstrate the ODAA hydrogel's ability to deliver antibiotics on demand, where the antibiotic content is reduced within the effective range. Regarding the in vitro antibacterial behavior, the combination of HAL and AMK synergistically destroyed the majority of Gram-positive and Gram-negative bacteria through several pathways with broad-spectrum antibacterial effects. ODAA hydrogel has been shown to be biocompatible, nearly non-cytotoxic, and capable of promoting wound healing. It is anticipated that the simultaneous targeted delivery of multiple drugs to lesions in the same carrier at ideal dose ratios for particular therapeutic combinations will produce the most synergistic effects.

Hydrogels dressings based on guar gum and chitosan: Inherent action against resistant bacteria and fast wound closure

Hydrogels made with depolymerized guar gum, oxidized with theoretical oxidation degrees of 20, 35 and 50 %, were obtained via Schiff's base reaction with N-succinyl chitosan. The materials obtained were subjected to characterization by FT-IR, rheology, swelling, degradation, and morphology. Additionally, their gelation time categorized all three hydrogels as injectable. The materials' swelling degrees in Phosphate-Buffered Saline (PBS) were in the range of 26-35 g of fluid/g gel and their pore size distribution was heterogeneous, with pores varying from 67 to 93 μm. All hydrogels degraded in PBS solution, but maintained around 40 % of their initial mass after 28 days, which was more than enough time for wound healing. The biomaterials were also flexible, self-repairing, adhesive and cytocompatible and presented intrinsic actions, regardless of the presence of additives or antibiotics, against gram-positive (Staphylococcus aureus, Staphylococcus epidermidis) and gram-negative bacteria (Escherichia coli). However, the most pronounced bactericidal effect was against resistant Staphylococcus aureus - MRSA. In vivo assays, performed with 50 % oxidized gum gel, demonstrated that this material exerted anti-inflammatory effects, accelerating the healing process and restoring tissues by approximately 99 % within 14 days. In conclusion, these hydrogels have unique characteristics, making them excellent candidates for wound-healing dressings.

Investigation of the potential roles of adipose stem cells and substances of natural origin in the healing process of E. coli infected wound model in Rats

Skin infections by pathogenic microorganisms are a serious problem due to the potential of dissemination through the bloodstream to various organs causing toxic effects that may be up to mortality. Escherichia coli (E. coli) is one of the most predominant Gram-negative bacterial species present globally with great attention for investigation. The current study is designed to investigate the possible role of adipose tissue-derived stem cells (ADSCs), as well as natural products such as Trichoderma viride (T. viride) extract, Saccharomyces boulardii (S. boulardii) solution in the enhancement of wound healing process in the infected skin with E. coli. Ninety-six female rats were divided into 8 groups (12 animal/group): normal skin, wounded skin, wounded skin infected with E. coli, infected-wounded skin treated by ADSCs, infected-wounded skin treated by T. viride extract, infected-wounded skin treated by S. boulardii solution, infected-wounded skin treated a combination of treatments, infected-wounded skin treated by gentamicin. At day 21 animal weights and bacterial count were detected and compared. Animals were sacrificed and skin from various groups was investigated using a light microscope for sections stained by (hematoxylin eosin, Masson trichrome, and PCNA) as well as transmission electron microscopy. Pro-inflammatory (IL-1β, TNF- α, and IL-13), anti-inflammatory cytokine (IL-4), and antioxidant enzymes (Superoxide dismutase, glutathione, and catalase) were assessed in various groups revealing that ADSCs lightly shift levels of these parameters in various rat groups to regular levels, while administration of T. viride extract, S. boulardii solution, their combination with ADSCs and gentamicin treatment drive the tested cytokines and enzymes to significant levels similar to a normal level where combination therapy gave the best result. The current findings revealed the possibility of using certain natural products as possible substitutes to regularly applied antibiotics with successive protective results in the wound infection model.