Porous metal-organic frameworks for gas storage and separation: Status and challenges

The Key to MOF Membrane Fabrication and Application: the Trade-off between Crystallization and Film Formation

Metal-organic frameworks (MOFs), owing the merits of ordered and tailored channel structures in the burgeoning crystalline porous materials, have demonstrated significant promise in construction of high-performance separation membranes. However, precisely because this crystal structure with strong molecular interaction in their lattice provides robust structural integrity and resistance to chemical and thermal degradation, crystalline MOFs typically exhibit insolubility, infusibility, stiffness and brittleness, and therefore their membrane-processing properties are far inferior to the flexible amorphous polymers and hinder their subsequent storage, transportation, and utilization. Hence, focusing on film-formation and crystallization is the foundation for exploring the fabrication and application of MOF membranes. In this review, the film-forming properties of crystalline MOFs are fundamentally analyzed from their inherent characteristics and compared with those of amorphous polymers, influencing factors of polycrystalline MOF membrane formation are summarized, the trade-off relationship between crystallization and membrane formation is discussed, and the strategy solving the film formation of crystalline MOFs in recent years are systematically reviewed, in anticipation of realizing the goal of preparing crystalline membranes with optimized processability and excellent performance.

Epitaxial Growth of Multicolor Lanthanide MOFs by Ultrasound for Photonic Barcodes

Epitaxially grown lanthanide metal-organic frameworks (Ln MOFs) exhibit multicolor and characteristic Ln emission with sharp emission bands, which are of great value in the field of information security and anti-counterfeiting. Epitaxial growth of Ln MOFs is generally achieved by solvothermal or hydrothermal methods, which suffer from challenges such as high reaction temperature and long growth time. Here, we report the fast epitaxial growth of multicolor lanthanide MOFs by an ultrasonic method at room temperature. The TbSmSQ shows a core-shell type structure with the Tb ion in the core and Sm in the shell within one crystal and exhibits the characteristic emission lines of Tb and Sm, respectively. The nonporous structure and large distance between lanthanide ions effectively avoid the influence of solvent vapor on the intensity and color of luminescence emission. Its application as photonic barcodes has been studied. This work demonstrates the feasibility of epitaxial growth of multicolor Ln MOFs by the ultrasonic method and its value for anti-counterfeiting and information security applications.

Solution Processable Metal-Organic Frameworks: Synthesis Strategy and Applications

Metal-organic frameworks (MOFs), constructed by inorganic secondary building units with organic linkers via reticular chemistry, inherently suffer from poor solution processability due to their insoluble nature, resulting from their extensive crystalline networks and structural rigidity. The ubiquitous occurrence of precipitation and agglomeration of MOFs upon formation poses a significant obstacle to the scale-up production of MOF-based monolith, aerogels, membranes, and electronic devices, thus restricting their practical applications in various scenarios. To address the previously mentioned challenge, significant strides have been achieved over the past decade in the development of various strategies aimed at preparing solution-processable MOF systems. In this review, the latest advance in the synthetic strategies for the construction of solution-processable MOFs, including direct dispersion in ionic liquids, surface modification, controllable calcination, and bottom-up synthesis, is comprehensively summarized. The respective advantages and disadvantages of each method are discussed. Additionally, the intriguing applications of solution-processable MOF systems in the fields of liquid adsorbent, molecular capture, sensing, and separation are systematically discussed. Finally, the challenges and opportunities about the continued advancement of solution-processable MOFs and their potential applications are outlooked.

Construction of a Fluorinated-Anion Pillared Metal-Organic Framework Exhibiting Dual-Pore Architecture for Simultaneous Enhancement of C2H2 Adsorption Capacity and Selectivity

Physisorption-based separation processes represents a promising alternative to the conventional thermally driven methods, such as cryogenic separation. However, a significant challenge lies in balancing the trade-off between adsorption capacity and selectivity of adsorbents. In this study, we introduce a novel fluorinated-anion pillared metal-organic frameworks (APMOFs) featuring a dual-pore architecture, constructed using a pyridine-oxazole bifunctional ligand. The inherent low symmetry of the ligand leads to significant distortion of the fluorinated-anion pillars, resulting in a distinctive type of APMOFs characterized by dual-pore architecture. On pore structure with constrict pore width is enriched with a high density of anion fluorinated pillars, offering numerous active sites advantageous for enhancing separation selectivity. Concurrently, the other pore structure exhibits larger dimensions, facilitating increased gas molecule accommodation and thereby augmenting adsorption capacity. Gas sorption studies reveal a substantial C2H2 adsorption capacity and a high C2H2/CO2 separation selectivity. Breakthrough experiments confirm its exceptional separation performance, while theoretical investigations elucidate a sequential adsorption process within these APMOFs, underscoring the efficacy of this strategy in overcoming trade-off limits in adsorbents.

Thoughts on the Rational Design of MOF-Guest Interactions for Future Intelligent Materials

The MOF-guest relationship is broken down in elementary phases, descriptors, and parameters. These descriptors and parameters allow precise descriptions of processes, whether they occur at the point when the guest enters the MOF, during the stay, or at the point of exiting. Description of these three phases is possible according to the location of the guest inside the MOF, the activity between MOF and guest, whether stimuli can be used, and whether a selective action can be exercised. The vocabulary provided herein can be useful to better formulate requirements when designing host-guest interactions in, and building new classes of, intelligent materials.

Active learning of alchemical adsorption simulations; towards a universal adsorption model

Adsorption is a fundamental process studied in materials science and engineering because it plays a critical role in various applications, including gas storage and separation. Understanding and predicting gas adsorption within porous materials demands comprehensive computational simulations that are often resource intensive, limiting the identification of promising materials. Active learning (AL) methods offer an effective strategy to reduce the computational burden by selectively acquiring critical data for model training. Metal-organic frameworks (MOFs) exhibit immense potential across various adsorption applications due to their porous structure and their modular nature, leading to diverse pore sizes and chemistry that serve as an ideal platform to develop adsorption models. Here, we demonstrate the efficacy of AL in predicting gas adsorption within MOFs using "alchemical" molecules and their interactions as surrogates for real molecules. We first applied AL separately to each MOF, reducing the training dataset size by 57.5% while retaining predictive accuracy. Subsequently, we amalgamated the refined datasets across 1800 MOFs to train a multilayer perceptron (MLP) model, successfully predicting adsorption of real molecules. Furthermore, by integrating MOF features into the AL framework using principal component analysis (PCA), we navigated MOF space effectively, achieving high predictive accuracy with only a subset of MOFs. Our results highlight AL's efficiency in reducing dataset size, enhancing model performance, and offering insights into adsorption phenomenon in large datasets of MOFs. This study underscores AL's crucial role in advancing computational material science and developing more accurate and less data intensive models for gas adsorption in porous materials.

Controlling nanocluster growth through nanoconfinement: the effect of the number and nature of metal-organic framework functionalities

Controlled nanocluster growth via nanoconfinement is an attractive approach as it allows for geometry control and potential surface-chemistry modification simultaneously. However, it is still not a straight-forward method and much of its success depends on the nature and possibly concentration of functionalities on the cavity walls that surround the clusters. To independently probe the effect of the nature and number of functional groups on the controlled Pd nanocluster growth within the pores of the metal-organic frameworks, Pd-laden UiO-66 analogues with mono- and bi-functionalised linkers of amino and methyl groups were successfully prepared and studied in a combined experimental-computational approach. The nature of the functional groups determines the strength of host-guest interactions, while the number of functional groups affects the extent of Pd loading. The interplay of these two effects means that for a successful Pd embedding, mono-functionalised host matrices are more favourable. Interestingly, in the context of the present and previous research, we find that host frameworks with functional groups displaying higher Lewis basicity are more successful at controlled Pd NC growth via nanoconfinement in MOFs.

Recent Progress in MOF-Aerogel Fabrication and Applications

Recent advancements in metal-organic frameworks (MOFs) underscore their significant potential in chemical and materials research, owing to their remarkable properties and diverse structures. Despite challenges like intrinsic brittleness, powdered crystalline nature, and limited stability impeding direct applications, MOF-based aerogels have shown superior performance in various areas, particularly in water treatment and contaminant removal. This review highlights the latest progress in MOF-based aerogels, with a focus on hybrid systems incorporating materials like graphene, carbon nanotube, silica, and cellulose in MOF aerogels, which enhance their functional properties. The manifold advantages of MOF-based aerogels in energy storage, adsorption, and catalysis are discussed, with an emphasizing on their improved stability, processability, and ease of handling. This review aims to unlock the potential of MOF-based aerogels and their real-world applications. Aerogels are expected to reshape the technological landscape of MOFs through enhanced stability, adaptability, and efficiency.

Zn, Cd and Cu Coordination Polymers for Metronidazole Sensing and for Ullmann and Chan-Lam Coupling Reactions

Five compounds, [Zn2(bpe)(BPTA)2(H2O)2] ⋅ 2H2O (1); [Zn(bpe)(BPTA)] (2); [Cd(bpe)(BPTA)H2O] (3); [Cd(BPTA) (bpmh)] ⋅ 2H2O (4); and Cu2(BPTA)2(bpmh)3(H2O)2] ⋅ 2H2O (5) were prepared employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2, 5 BPTA) as the primary ligand and 1,2-di(pyridin-4-yl)ethane (4, 4' bpe) (1-3) and 1,2-bis(pyridin-3-ylmethylene)hydrazine (bpmh) (4-5) as the secondary ligands. Single crystal studies indicated that the compounds 1, 3 and 5 have two-dimensional layer structures and compounds 2 and 4 three-dimensional structures. The luminescence behaviour of the compounds 2 and 3 were explored for the sensing of metronidazole in aqueous medium. The studies indicated that the compounds can detect metronidazole in ppm level both in solution as well as simple paper strips. The Cu compound 5 was found to lose the coordinated water molecule at 100 °C without any structural change. The coordinatively unsaturated Cu-centre were examined towards the Lewis acidic character by carrying out the Ullmann type C-C homocoupling reaction of the aromatic halide compounds. The compounds, 4 and 5, also have the Lewis basic functionality arising out the =N-N=, aza groups. The bifunctional nature of the coordination polymers (CP) was explored towards the Chan-Lam coupling reaction between phenyl boronic acid and aniline derivatives in the ethanol medium. In both the catalytic reactions, good yields and recyclability were observed. The present studies illustrated the rich diversity that the transition metal containing compounds exhibit in extended framework structures.

Crystal Structure, Photophysical Properties and Antibacterial Activity of a Cd(II) Complex with Trans-2,3,4-Trimethoxycinnamic Acid and 4,4'-Bipyridine Ligands

A new coordination polymer {[Cd(C12H13O5)2(4,4'-bpy)(H2O)2]}n (Cd-Tmca-bpy) was constructed with trans-2,3,4-Trimethoxycinnamic acid (HTmca) and 4,4'-Bipyridine (4,4'-bpy) ligands. This complex was structurally characterized on the basis of elemental analysis, infrared (IR) spectroscopy, powder X-ray diffraction and thermogravimetric analyses. X-ray crystallography revealed that the complex was monoclinic, space group C2/c. The Cd(II) ion in the complex was six coordinated, adopting an octahedron geometry. The neighboring Cd(II) ions linked linear ligand 4,4'-bpy molecules to form an infinite 1D chain. The 1D chain was further interlinked by O-H···O and C-H···O hydrogen bonds, resulting in a 3-D supramolecular framework. Meanwhile, the photoluminescence spectrum of the Cd(II) complex at room temperature exhibited an emission maximum at 475 nm. Using the time-dependent density functional theory (TD-DFT) method, the electronic absorption spectra of the Cd(II) complex was predicted. A good agreement was achieved between the predicted spectra and the experimental data. Bioactivity studies showed that the complex exhibited significant inhibition halos against Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus).

Exploring Biliverdin's Molecular Interactions with Cu- and Fe-Based MOFs: A Unified In Vitro Study with Photoacoustic Analysis

Metal-organic frameworks (MOFs) have shown promise in enhancing the stability of biomolecules. Herein, biliverdin (BVD), a photoacoustic (PA) and fluorescent agent, was immobilized within the pores of NH2-MIL-101 (Fe) (FeMOFs) and on the surface of CuBTC crystallites (CuMOFs). MOFs were found to enhance the fluorescence emission and quench the PA intensity of biliverdin. Fluorescence and PA studies, in tandem with DFT simulations, demonstrated that the spectral interactions between MOFs and BVD resulted from interactions between biliverdin and the MOF pores and surfaces in addition to alterations in the HOMO-LUMO energy gap. The MOF internal structure of the MOF played a role in BVD loading, with the FeMOFs enabling greater BVD encapsulation, while CuMOF interactions with BVD primarily took place on the MOF surface. The role of these surface vs pore interactions in the release of biliverdin was explored. This study demonstrates that the effects of the MOF internal structure, surface interactions, and energy interactions should be taken into consideration for biomolecule loading in MOFs.

Metal-Organic Frameworks for Electrocatalytic CO2 Reduction: From Catalytic Site Design to Microenvironment Modulation

The electrochemical reduction of CO2 to high-value carbon-based chemicals provides a sustainable approach to achieving an artificial carbon cycle. In the decade, metal-organic frameworks (MOFs), a kind of porous crystalline porous materials featuring well-defined structures, large surface area, high porosity, diverse components, easy tailorability, and controllable morphology, have attracted considerable research attention, serving as electrocatalysts to drive CO2 reduction. In this review, the reaction mechanisms of electrochemical CO2 reduction and the structure/component advantages of MOFs meeting the requirements of electrocatalysts for CO2 reduction are analyzed. After that, the representative progress for the precise fabrication of MOF-based electrocatalysts for CO2 reduction, focusing on catalytic site design and microenvironment modulation, are systemically summarized. Furthermore, the emerging applications and promising research for more practical scenarios related to electrochemical CO2 conversion are specifically proposed. Finally, the remaining challenges and future outlook of MOFs for electrochemical CO2 reduction are further discussed.

Methane Storage and Purification of Natural Gas in Metal-Organic Frameworks

Natural gas, primarily composed of methane (CH4), represent an excellent choice for a potentially sustainable renewable energy transition. However, the process of compressing and liquefying CH4 for transport and storage typically results in significant energy losses. In addition, in order to optimize its efficacy as a fuel, the CH4 content of natural gas needs to be increased to a level of at least 97 % to ensure its quality and efficiency in various applications. Metal-organic frameworks (MOFs) represent a novel category of porous materials that possess exceptional capability in modifying pore size and chemical environment, making them ideally suited for the storage of CH4 and the adsorption of propane (C3H8), ethane (C2H6), carbon dioxide (CO2), nitrogen (N2), and hydrogen sulfide (H2S) to facilitate the purification process of CH4 from natural gas. In this paper, we systematically summarize the mechanism by which MOF materials facilitate the storage of CH4 and the purification of CH4 from natural gas, leveraging the structural characteristics inherent to MOF materials. The focus of further research should also be directed towards the investigation of CH4 storage by flexible MOFs, the resolution of the trade-off dilemma, and the commercial application of MOFs.

Spatially Confined π-Complexation within Pore-Space-Partitioned Metal-Organic Frameworks for Enhanced Light Hydrocarbon Separation and Purification

Ultramicroporous metal-organic frameworks (MOFs) are demonstrated to be advantageous for the separation and purification of light hydrocarbons such as C2H2, C2H4, and CH4. The introduction of transition metal sites with strong π-complexation affinity into MOFs is more effective than other adsorption sites for the selective adsorption of π-electron-rich unsaturated hydrocarbon gases from their mixtures. However, lower coordination numbers make it challenging to produce robust MOFs directly utilizing metal ions with π-coordination activity, such as Cu+, Ag+, and Pd2+. Herein, a series of novel π-complexing MOFs (SNNU-33s) with a pore size of 4.6 Å are precisely constructed by cleverly introducing symmetrically matched C3-type [Cu(pyz)3] (pyz = pyrazine) coordinated fragments into 1D hexagonal channels of MIL-88 prototype frameworks. Benifit from the spatial confinement combined with π-complex-active Cu+ of [Cu(pyz)3], pore-space-partitioned SNNU-33 MOFs all present excellent C2H2/CH4, C2H4/CH4, and CO2/CH4 separation ability. Notably, the optimized SNNU-33b adsorbent demonstrates top-level IAST selectivity values for C2H2/CH4 (597.4) and C2H4/CH4 (69.8), as well as excellent breakthrough performance. Theoretical calculations further reveal that such benchmark light hydrocarbon separation and purification ability is mainly ascribed to the extra-strong binding affinity between Cu+ and π-electron donor molecules via a spatially confined π-complexation process.

Fabrication of magnetic carbohydrate-modified iron oxide nanoparticles (Fe3O4/pectin) decorated with bimetallic Co/Cu-MOF as an effective and recoverable catalyst for the Biginelli reaction

Due to their biocompatibility, facile recoverability, mechanical and thermal stability, high surface area, and active catalytic sites, magnetic nanocomposites, containing natural polymers and magnetic nanoparticles, have been used to produce supports for catalysts or biocatalysts. Pectin, an important polycarbohydrate, has abundant functional groups with excellent ability to coat the surface of the nanoparticles to fabricate composite and hybrid materials. A novel bimetallic cobalt(ii) and copper(ii)-based metal-organic framework (Co/Cu-MOF) immobilized pectin-modified Fe3O4 magnetic nanocomposite was designed and fabricated. Fe3O4 nanoparticles were modified in situ by pectin and, subsequently, used as a support for growing Co/Cu-MOF [Fe3O4/pectin/(Co/Cu)MOF]. The properties of the nanocomposite were investigated by FT-IR, XRD, SEM, EDS, VSM, STA, and BET. The nanocomposite exhibited both magnetic characteristics and a high surface area, making it a suitable candidate for catalytic applications. Then, the Fe3O4/pectin/(Co/Cu)MOF nanocomposite was utilized in the Biginelli reaction for the production of biologically active dihydropyrimidinones. Due to paramagnetism, Fe3O4/pectin/(Co/Cu)MOF was easily recovered and reused in six cycles without significant loss in reactivity. This green method comprises several benefits, such as mild reaction conditions, free-solvent media, high yields, easy workup, short reaction times and reusability of the prepared catalyst.

Multifunctional Lanthanide Metal-Organic Frameworks Are Used for Fluorescence Sensing of Bi3+, HPO42-, Flu, and PNBA and Application

Using a nitrogen-containing tricarboxylic acid ligand (imidazole-1-yl) benzene-2,4,6-tricarboxylic acid (H3ttc) and lanthanide metal elements (Dy, Eu, Nd, and Gd), four lanthanide metal organic frameworks (Ln-MOFs) with the same structure, namely, {[Dy2 (Httc)3]·1.5DMF}n(1), {[Eu2 (Httc)3]·1.5DMF}n(2), {[Nd2 (Httc)3]·1.5DMF}n(3), and {[Gd2 (Httc)3]·1.5DMF}n(4), were synthesized under solvothermal conditions. The characterization analysis showed that the four isomorphic Ln-MOFs were trigonal crystals of the R3̅c space group, with good phase purity and thermal stability. Fluorescence analysis showed that complex 1 can be an excellent fluorescence sensor for Bi3+, HPO42-, and fluridine (Flu), while complex 2 can be an excellent fluorescence sensor for p-nitrobenzoic acid (PNBA). And their sensing mechanisms were discussed in detail. The fluorescent test paper and fluorescent seal were prepared by using the excellent luminescence properties of 1 and 2, and the pesticide on the surface of cherry tomato was detected. The applicability of these MOFs as fluorescence sensors was proved. Therefore, Ln-MOFs are expected to have unpredictable application prospects in the field of environmental detection.

High-Entropy Lanthanide-Organic Framework as an Efficient Heterogeneous Catalyst for Cycloaddition of CO2 with Epoxides and Knoevenagel Condensation

Multimetallic synergistic effects have the potential to improve CO2 cycloesterification and Knoevenagel reaction processes, outperforming monometallic MOFs. The results demonstrate superior performance in these processes. To investigate this, we created and characterized a selection of single-component Ln(III)-MOFs (Ln=Eu, Tb, Gd, Dy, Ho) and high-entropy lanthanide-organic framework (HE-LnMOF) using solvent-thermal conditions. The experiments revealed that HE-LnMOF exhibited heightened catalytic efficiency in CO2 cycloesterification and Knoevenagel reactions compared to single-component Ln(III) MOFs. Moreover, the HE-LnMOF displayed significant stability, maintaining their structural integrity after five cycles while sustaining elevated conversion and selectivity rates. The feasible mechanisms of catalytic reactions were also discussed. HE-LnMOF possess multiple unsaturated metal centers, acting as Lewis acid sites, with oxygen atoms connecting the metal, and hydroxyl groups on the ligand serving as base sites. This study introduces a novel method for synthesizing HE-LnMOF and presents a fresh application of HE-LnMOF for converting CO2.

Reversible Phase Transformations in a Double-Walled Diamondoid Coordination Network with a Stepped Isotherm for Methane

Flexible metal-organic materials (FMOMs) with stepped isotherms can offer enhanced working capacity in storage applications such as adsorbed natural gas (ANG) storage. Unfortunately, whereas >1000 FMOMs are known, only a handful exhibit methane uptake of >150 cm3/cm3 at 65 atm and 298 K, conditions relevant to ANG. Here, we report a double-walled 2-fold interpenetrated diamondoid (dia) network, X-dia-6-Ni, [Ni2L4(μ-H2O)]n, comprising a new azo linker ligand, L- (L- = (E)-3-(pyridin-4-yldiazenyl)benzoate) and 8-connected dinuclear molecular building blocks. X-dia-6-Ni exhibited gas (CO2, N2, CH4) and liquid (C8 hydrocarbons)-induced reversible transformations between its activated narrow-pore β phase and γ, a large-pore phase with ca. 33% increase in unit cell volume. Single-crystal X-ray diffraction (SCXRD) studies of the as-synthesized phase α, β, and γ revealed that structural transformations were enabled by twisting of the azo moiety and/or deformation of the MBB. Further insight into these transformations was gained from variable temperature powder XRD and in situ variable pressure powder XRD. Low-temperature N2 and CO2 sorption revealed stepped Type F-II isotherms with saturation uptakes of 422 and 401 cm3/g, respectively. X-dia-6-Ni exhibited uptake of 200 cm3/cm3 (65 atm, 298 K) and a high CH4 working capacity of 166 cm3/cm3 (5-65 bar, 298 K, 33 cycles), the third highest value yet reported for an FMOM and the highest value for an FMOM with a Type F-II isotherm.

The influence of HKUST-1 and MOF-76 hand grinding/mechanical activation on stability, particle size, textural properties and carbon dioxide sorption

In this study, we explore the mechanical treatment of two metal-organic frameworks (MOFs), HKUST-1 and MOF-76, applying various milling methods to assess their impact on stability, porosity, and CO2 adsorption capacity. The effects of different mechanical grinding techniques, such as high-energy ball milling and hand grinding, on these MOFs were compared. The impact of milling time, milling speed and ball size during high-energy ball milling was assessed via the Design of Experiments methodology, namely using a 33 Taguchi orthogonal array. The results highlight a marked improvement in CO2 adsorption capacity for HKUST-1 through hand milling, increasing from an initial 25.70 wt.% (5.84 mmol g-1) to 41.37 wt.% (9.40 mmol g-1), marking a significant 38% increase. In contrast, high-energy ball milling seems to worsen this property, diminishing the CO2 adsorption abilities of the materials. Notably, MOF-76 shows resistance to hand grinding, closely resembling the original sample's performance. Hand grinding also proved to be well reproducible. These findings clarify the complex effects of mechanical milling on MOF materials, emphasising the necessity of choosing the proper processing techniques to enhance their stability, texture, and performance in CO2 capture and storage applications.

Amorphous Engineering of Scalable Metal-Organic Framework-Derived Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

The engineering of amorphous metal-organic frameworks (MOFs) offers potential opportunities for the construction of electrocatalysts for efficient oxygen evolution reaction (OER). Herein, highly efficient OER performance and durability in alkaline electrolyte are discovered for MOF-derived amorphous and porous electrocatalysts, which are synthesized in a brief procedure and can be facilely produced in scalable quantities. The structural inheritance of MOF amorphous catalysts is significant for the retention of catalytic sites and the diffusion of electrolytes, and the presence of Fe sites can change the electronic structure and effectively control the adsorption behavior of important intermediates, accelerating reaction kinetics. The obtained amorphous A-FeNi can be transformed from FeNi-MOF effortlessly and instantly, and it only needs low overpotentials of 152 and 232 mV at 10 and 100 mA cm-2 with a Tafel slope of 17 mV dec-1 in 1 m KOH for OER. Moreover, A-FeNi possesses high corrosion resistance and durability, therefore A-FeNi can work continually for at least 400 h at 100 mA cm-2. This work may pave a new avenue for the design of MOFs-related amorphous electrocatalyst.

Application of metal-organic frameworks in infectious wound healing

Metal-organic frameworks (MOFs) are metal-organic skeleton compounds composed of self-assembled metal ions or clusters and organic ligands. MOF materials often have porous structures, high specific surface areas, uniform and adjustable pores, high surface activity and easy modification and have a wide range of prospects for application. MOFs have been widely used. In recent years, with the continuous expansion of MOF materials, they have also achieved remarkable results in the field of antimicrobial agents. In this review, the structural composition and synthetic modification of MOF materials are introduced in detail, and the antimicrobial mechanisms and applications of these materials in the healing of infected wounds are described. Moreover, the opportunities and challenges encountered in the development of MOF materials are presented, and we expect that additional MOF materials with high biosafety and efficient antimicrobial capacity will be developed in the future.

Data-Driven and Machine Learning to Screen Metal-Organic Frameworks for the Efficient Separation of Methane

With the rapid growth of the economy, people are increasingly reliant on energy sources. However, in recent years, the energy crisis has gradually intensified. As a clean energy source, methane has garnered widespread attention for its development and utilization. This study employed both large-scale computational screening and machine learning to investigate the adsorption and diffusion properties of thousands of metal-organic frameworks (MOFs) in six gas binary mixtures of CH4 (H2/CH4, N2/CH4, O2/CH4, CO2/CH4, H2S/CH4, He/CH4) for methane purification. Firstly, a univariate analysis was conducted to discuss the relationships between the performance indicators of adsorbents and their characteristic descriptors. Subsequently, four machine learning methods were utilized to predict the diffusivity/selectivity of gas, with the light gradient boosting machine (LGBM) algorithm emerging as the optimal one, yielding R2 values of 0.954 for the diffusivity and 0.931 for the selectivity. Furthermore, the LGBM algorithm was combined with the SHapley Additive exPlanation (SHAP) technique to quantitatively analyze the relative importance of each MOF descriptor, revealing that the pore limiting diameter (PLD) was the most critical structural descriptor affecting molecular diffusivity. Finally, for each system of CH4 mixture, three high-performance MOFs were identified, and the commonalities among high-performance MOFs were analyzed, leading to the proposals of three design principles involving changes only to the metal centers, organic linkers, or topological structures. Thus, this work reveals microscopic insights into the separation mechanisms of CH4 from different binary mixtures in MOFs.

Recent Advances in Pristine Iron Triad Metal-Organic Framework Cathodes for Alkali Metal-Ion Batteries

Pristine iron triad metal-organic frameworks (MOFs), i.e., Fe-MOFs, Co-MOFs, Ni-MOFs, and heterometallic iron triad MOFs, are utilized as versatile and promising cathodes for alkali metal-ion batteries, owing to their distinctive structure characteristics, including modifiable and designable composition, multi-electron redox-active sites, exceptional porosity, and stable construction facilitating rapid ion diffusion. Notably, pristine iron triad MOFs cathodes have recently achieved significant milestones in electrochemical energy storage due to their exceptional electrochemical properties. Here, the recent advances in pristine iron triad MOFs cathodes for alkali metal-ion batteries are summarized. The redox reaction mechanisms and essential strategies to boost the electrochemical behaviors in associated electrochemical energy storage devices are also explored. Furthermore, insights into the future prospects related to pristine iron triad MOFs cathodes for lithium-ion, sodium-ion, and potassium-ion batteries are also delivered.

ZIF-8 Vibrational Spectra: Peak Assignments and Defect Signals

Zeolitic imidazolate framework (ZIF-8) is a promising material for gas separation applications. It also serves as a prototype for numerous ZIFs, including amorphous ones, with a broader range of possible applications, including sensors, catalysis, and lithography. It consists of zinc coordinated with 2-methylimidazolate (2mIm) and has been synthesized with methods ranging from liquid-phase to solvent-free synthesis, which aim to control its crystal size and shape, film thickness and microstructure, and incorporation into nanocomposites. Depending on the synthesis method and postsynthesis treatments, ZIF-8 materials may deviate from the nominal defect-free ZIF-8 crystal structure due to defects like missing 2mIm, missing zinc, and physically adsorbed 2mIm trapped in the ZIF-8 pores, which may alter its performance and stability. Infrared (IR) spectroscopy has been used to assess the presence of defects in ZIF-8 and related materials. However, conflicting interpretations by various authors persist in the literature. Here, we systematically investigate ZIF-8 vibrational spectra by combining experimental IR spectroscopy and first-principles molecular dynamics simulations, focusing on assigning peaks and elucidating the spectroscopic signals of putative defects present in the ZIF-8 material. We attempt to resolve conflicting assignments from the literature and to provide a comprehensive understanding of the vibrational spectra of ZIF-8 and its defect-induced variations, aiming toward more precise quality control and design of ZIF-8-based materials for emerging applications.

Direct Observation of Enhanced Iodine Binding within a Series of Functionalized Metal-Organic Frameworks with Exceptional Irradiation Stability

Optimization of active sites and stability under irradiation are important targets for sorbent materials that might be used for iodine (I2) storage. Herein, we report the direct observation of I2 binding in a series of Cu(II)-based isostructural metal-organic frameworks, MFM-170, MFM-172, MFM-174, NJU-Bai20, and NJU-Bai21, incorporating various functional groups (-H, -CH3, - NH2, -C≡C-, and -CONH-, respectively). MFM-170 shows a reversible uptake of 3.37 g g-1 and a high packing density of 4.41 g cm-3 for physiosorbed I2. The incorporation of -NH2 and -C≡C- moieties in MFM-174 and NJU-Bai20, respectively, enhances the binding of I2, affording uptakes of up to 3.91 g g-1. In addition, an exceptional I2 packing density of 4.83 g cm-3 is achieved in MFM-174, comparable to that of solid iodine (4.93 g cm-3). In situ crystallographic studies show the formation of a range of supramolecular and chemical interactions [I···N, I···H2N] and [I···C≡C, I-C═C-I] between -NH2, -C≡C- sites, respectively, and adsorbed I2 molecules. These observations have been confirmed via a combination of solid-state nuclear magnetic resonance, X-ray photoelectron, and Raman spectroscopies. Importantly, γ-irradiation confirmed the ultraresistance of MFM-170, MFM-174, and NJU-Bai20 suggesting their potential as efficient sorbents for cleanup of radioactive waste.

Enhanced optical and electrochemical properties of FeBTC MOF modified TiO2 photoanode for DSSCs application

In this work, iron based 1, 3, 5-tricarboxylic acid (FeBTC) was prepared via microwave-assisted method and incorporated into TiO2 via ultrasonic assisted method. The TiO2-FeBTC nanocomposites were characterized by XRD, FTIR, Raman, BET, FESEM, HRTEM, TGA, UV‒vis DRS and PL to understand their crystallographic, surface morphology, and optical characteristics. The Raman spectra showed a blue shift of Eg, A1g, and B1g peaks upon incorporation of FeBTC MOF onto TiO2. HRTEM and XRD analysis confirmed a mixture of TiO2 nanospheres and hexagonal FeBTC MOF morphologies with high crystallinity. The incorporation of FeBTC onto TiO2 improved the surface area as confirmed by BET results, which resulted in improved absorption in the visible region as a results of reduced bandgap energy from 3.2 to 2.84 eV. The PL results showed a reduced intensity for TiO2-FeBTC (6%) sample, indicating improved separation of electron hole pairs and reduced recombination rate. After fabrication of the TiO2-FeBTC MOF photoanode, the charge transfer kinetics were enhanced at TiO2-FeBTC MOF (6%) with Rp value of 966 Ω, as given by EIS studies. This led to high performance due to low charge resistance. Hence, high power conversion efficiency (PCE) value of 0.538% for TiO2-FeBTC (6%) was achieved, in comparison with other loadings. This was attributed to a relatively high surface area which allowed more charge shuttling and thus better electrical response. Conversely, upon increasing the FeBTC MOF loading to 8%, significant reduction in efficiency (0.478%) was obtained, which was attributed to sluggish charge transfer and fast electron-hole pair recombination rate. The TiO2-FeBTC (6%) may be a good candidate for use in DSSCs as a photoanode materials for improved efficiency.

A Microporous Mn(II) MOF Based on 5-(4H-1,2,4-triazol-4-yl) Isophthalic Acid for CO2/N2 Separation

Removal of carbon dioxide (CO2) from a CO2/N2 mixture by utilizing CO2-selective sorbents is important from the perspective of energy security and environmental sustainability. Herein, a microporous metal-organic framework (MOF) composed of manganese(II) and a bifunctional linker 5-(4H-1,2,4-triazol-4-yl)benzene-1,3-dicarboxylic acid (H2L), [Mn(HL)2] (1) is designed and synthesized using a hydrothermal method. Characterized by single-crystal X-ray diffraction (SCXRD), a microporous channel was found in the structure of compound 1 along the a-axis. Attributed to hydrogen-binding interactions between CO2 molecules and N- and O-donor ligands in its microporous one-dimensional (1D) channel, compound 1 exhibits favorable adsorption of CO2 over N2. Further, verified by experimental breakthrough tests, the CO2/N2 mixture can be separated efficiently. This work provides potential guidance for designing CO2-selective MOFs for CO2/N2 separation.

Machine learning insights into predicting biogas separation in metal-organic frameworks

Breakthroughs in efficient use of biogas fuel depend on successful separation of carbon dioxide/methane streams and identification of appropriate separation materials. In this work, machine learning models are trained to predict biogas separation properties of metal-organic frameworks (MOFs). Training data are obtained using grand canonical Monte Carlo simulations of experimental MOFs which have been carefully curated to ensure data quality and structural viability. The models show excellent performance in predicting gas uptake and classifying MOFs according to the trade-off between gas uptake and selectivity, with R2 values consistently above 0.9 for the validation set. We make prospective predictions on an independent external set of hypothetical MOFs, and examine these predictions in comparison to the results of grand canonical Monte Carlo calculations. The best-performing trained models correctly filter out over 90% of low-performing unseen MOFs, illustrating their applicability to other MOF datasets.

Construction of Core-Shelled Covalent/Metal-Organic Frameworks for Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is the half-reaction in zinc-air batteries and water splitting. Developing highly efficient catalysts toward OER is a challenge due to the difficulty of removing four electrons from two water molecules. Covalent organic frameworks (COFs) provide the new chance to construct the highly active catalysts for OER, because they have controlled skeletons, porosities, and well-defined catalytic sites. In this work, core-shell hybrids of COF and metal-organic frameworks (MOFs) have first demonstrated to catalyze the OER. The synergetic effects between the COF-shell and MOF-core render the catalyst with higher activity than those from the COF and MOF. And the catalyst achieved an overpotential of 328 mV, with a Tafel slope of 43.23 mV dec-1 in 1 m KOH. The theoretical calculation revealed that the high activity is from the Fe sites in the catalyst, which has suitable binding ability of reactant intermediate (OOH*), and thus contributed high activity. This work gives a new insight to designing COFs in electrochemical energy storage and conversion systems.

An Ultra-stable Supramolecular Framework Based on Consecutive Side-by-side Hydrogen Bonds for One-step C2H4/C2H6 Separation

The one-step efficient separation of high-purity C2H4 from C2H4/C2H6 mixtures by hydrogen-bonded organic frameworks (HOFs) faces two problems: lack of strategies for constructing stable pores in HOFs and how to obtain high C2H6 selectivity. Herein, we have developed a microporous Mortise-Tenon-type HOF (MTHOF-1, MT is short for Mortise-Tenon structure) with a new self-assembly mode for C2H4/C2H6 separation. Unlike previous HOFs which usually possess discrete head-to-head hydrogen bonds, MTHOF-1 is assembled by unique consecutive side-by-side hydrogen bonds, which result in mortise-and-tenon pores decorated with orderly arranged amide groups and benzene rings. As expected, MTHOF-1 exhibits excellent stability under various conditions and shows clear separation trends for C2H6/C2H4. The IAST selectivity is as high as 2.15 at 298 K. More importantly, dynamic breakthrough experiments have demonstrated that MTHOF-1 can effectively separate the C2H6/C2H4 feed gas to obtain polymer-grade C2H4 in one step even under high-humidity conditions.

Exploring the Potential of Metal-Organic Frameworks for Cryogenic Helium-Based Gas Gap Heat Switches via High-Throughput Computational Screening

With the advantages of a long lifetime and high reliability, gas gap heat switches (GGHSs) are attractive in many thermal management applications, especially in space-borne cryogenic systems. The performance of a GGHS is significantly affected by the adsorption characteristics of the adsorbent in the sorption pump. Compared with the commonly used adsorbent in the GGHSs (activated carbon), metal-organic frameworks (MOFs) have larger surface areas, higher pore volumes, and exceptional tunability, which motivates this study to explore their potential for application in cryogenic GGHSs. To this end, two performance metrics, the required volume of adsorbent (vsor) and total input heat (qtot), were computed for about 6000 MOFs via molecular simulations and compared with those of activated carbon. It is found that over 2300 MOFs possess a smaller vsor than activated carbon, and the smallest vsor of MOFs is about 12.7% of that of activated carbon. vsor and qtot generally change in the same direction, which implies it is possible to reduce both parameters simultaneously by choosing a suitable MOF. Structure-performance analysis reveals that 1/vsor consistently increases first and then decreases with pore limiting diameter, largest cavity diameter, available pore volume, accessible surface area, helium void fraction, and bulk density. Descriptor ranges corresponding to high-performing MOFs were identified based on Precision-Recall analysis. Notably, Zr-containing MOFs are particularly likely to have smaller vsor values than activated carbon. It is anticipated that the promising MOFs identified by this study will motivate further experimental investigations, and the insights into structure-performance relationships can serve to guide the rational design of novel MOF candidates for GGHSs.

Recognition of C4 Olefins by an Ultramicroporous ftw-Type Yttrium-Based Metal-Organic Framework with Distorted Cages

Developing porous adsorbents for efficient separation of C4 olefins is significant but challenging in the petrochemical industry due to their similar molecular sizes and physical properties. The separation efficiency is often limited when separating C4 olefins by a single separation mechanism. Herein, an ultramicroporous yttrium-based MOF, Y-dbai, is reported featuring cage-like pores connected by small windows, for recognition and efficient separation of C4 olefins through a synergistic effect of thermodynamic and kinetic mechanisms. At 298 K and 1 bar, the adsorption capacities of Y-dbai for C4H6, 1-C4H8, and i-C4H8 are 2.88, 1.07, and 0.14 mmol g-1, respectively, indicating a molecular sieving effect toward i-C4H8. The C4H6/i-C4H8 and 1-C4H8/i-C4H8 uptake selectivities of Y-dbai are 20.6 and 7.6, respectively, outperforming most of the reported adsorbents. The static and kinetic adsorption experiments coupled with DFT calculations indicate the separation should be attributed to a combined effect of thermodynamically and kinetically controlled mechanism. Breakthrough experiments have confirmed the excellent separation capability of Y-dbai toward C4H6/1-C4H8, C4H6/i-C4H8, and C4H6/1-C4H8/i-C4H8 mixtures.

Design and application of metal organic frameworks for heavy metals adsorption in water: a review

The growing apprehension surrounding heavy metal pollution in both environmental and industrial contexts has spurred extensive research into adsorption materials aimed at efficient remediation. Among these materials, Metal-Organic Frameworks (MOFs) have risen as versatile and promising contenders due to their adjustable properties, expansive surface areas, and sustainable characteristics, compared to traditional options like activated carbon and zeolites. This exhaustive review delves into the synthesis techniques, structural diversity, and adsorption capabilities of MOFs for the effective removal of heavy metals. The article explores the evolution of MOF design and fabrication methods, highlighting pivotal parameters influencing their adsorption performance, such as pore size, surface area, and the presence of functional groups. In this perspective review, a thorough analysis of various MOFs is presented, emphasizing the crucial role of ligands and metal nodes in adapting MOF properties for heavy metal removal. Moreover, the review delves into recent advancements in MOF-based composites and hybrid materials, shedding light on their heightened adsorption capacities, recyclability, and potential for regeneration. Challenges for optimization, regeneration efficiency and minimizing costs for large-scale applications are discussed.

Highlights in Interface of Wastewater Treatment by Utilizing Metal Organic Frameworks: Purification and Adsorption Kinetics

Polluted water has become a concern for the scientific community as it causes many severe threats to living beings. Detection or removal of contaminants present in wastewater and attaining purity of water that can be used for various purposes are a primary responsibility. Different treatment methods have already been used for the purification of sewage. There is a need for low-cost, highly selective, and reusable materials that can efficiently remove pollutants or purify contaminated water. In this regard, MOFs have shown significant potential for applications such as supercapacitors, drug delivery, gas storage, pollutant adsorption, etc. The outstanding structural diversity, substantial surface areas, and adjustable pore sizes of MOFs make them superior candidates for wastewater treatment. This Review provides an overview of the interaction science and engineering (kinetic and thermodynamic aspects with interactions) underpinning MOFs for water purification. First, fundamental strategies for the synthesis methods of MOFs, different categories, and their applicability in wastewater treatment are summarized, followed by a detailed explanation of various interaction mechanisms. Finally, current challenges and future outlooks for research on MOF materials toward the adsorption of hazardous components are discussed. A new avenue for modifying their structural characteristics for the adsorption and separation of hazardous materials, which will undoubtedly direct future work, is also summarized.

Effective Strategy toward Obtaining Reliable Breakthrough Curves of Solid Adsorbents

Metal-organic frameworks (MOFs) have demonstrated their versatility in a wide range of applications, including chemical separation, gas capture, and storage. In industrial adsorption processes, MOFs are integral to the creation of selective gas adsorption fixed beds. In this context, the assessment of their separation performance under relevant conditions often relies on breakthrough experiments. One aspect frequently overlooked in these experiments is the shaping of MOF powders, which can significantly impact the accuracy of breakthrough results. In this study, we present an approach for immobilizing MOF particles on the surface of glass beads (GBs) utilizing trimethylolpropane triglycidyl ether (TMPTGE) as a binder, leading to the creation of MOF@GB materials. We successfully synthesized five targeted MOF composites, namely, SIFSIX-3-Ni@GB, CALF-20@GB, UiO-66@GB, HKUST-1@GB, and MOF-808@GB, each possessing distinct pore sizes and structural topologies. Characterization studies employing powder X-ray diffraction and adsorption isotherm analyses demonstrated that MOFs@GB retained their crystallinity and 73-90% of the Brunauer-Emmett-Teller area of their parent MOFs. Dynamic breakthrough experiments revealed that, in comparison to their parent MOFs, MOF@GB configurations enhanced the accuracy of breakthrough measurements by mitigating pressure buildup and minimizing reductions in the gas flow rate. This work underscores the significance of meticulous experimental design, specifically in shaping MOF powders, to optimize the efficacy of breakthrough experiments. Our proposed strategy aims to provide a versatile platform for MOF powder processing, thereby facilitating more reliable breakthrough experiments.

Hydrogen bond unlocking-driven pore structure control for shifting multi-component gas separation function

Purification of ethylene (C2H4) as the most extensive and output chemical, from complex multi-components is of great significance but highly challenging. Herein we demonstrate that precise pore structure tuning by controlling the network hydrogen bonds in two highly-related porous coordination networks can shift the efficient C2H4 separation function from C2H2/C2H4/C2H6 ternary mixture to CO2/C2H2/C2H4/C2H6 quaternary mixture system. Single-crystal X-ray diffraction revealed that the different amino groups on the triazolate ligands resulted in the change of the hydrogen bonding in the host network, which led to changes in the pore shape and pore chemistry. Gas adsorption isotherms, adsorption kinetics and gas-loaded crystal structure analysis indicated that the coordination network Zn-fa-atz (2) weakened the affinity for three C2 hydrocarbons synchronously including C2H4 but enhanced the CO2 adsorption due to the optimized CO2-host interaction and the faster CO2 diffusion, leading to effective C2H4 production from the CO2/C2H2/C2H4/C2H6 mixture in one step based on the experimental and simulated breakthrough data. Moreover, it can be shaped into spherical pellets with maintained porosity and separation performance.

Reversible Acid-Base Long Persistent Luminescence Switch Based on Amino-Functionalized Metal-Organic Frameworks

Metal-organic frameworks (MOFs) with long persistent luminescence (LPL) have attracted extensive research attention from researchers due to their potential applications in information encryption, anticounterfeiting technology, and security logic. In contrast to short-lived fluorescent materials, LPL materials offer a visible response that can be easily distinguished by the naked eye, thereby facilitating a much clearer visualization. However, there are few reports on functional LPL MOF materials as probes. In this article, two amino-functional LPL MOFs (VB4-2D and VB4-1D) were synthesized. They both exhibited adjustable fluorescence and phosphorescence from blue to green and from cyan to green, respectively. Notably, the MOFs emitted bright and adjustable LPL upon the removal of the different radiation sources. The basic amino functional groups in the MOFs exhibited acid and ammonia sensitivity, and fluorescence and phosphorescence emission intensities can be burst and restored in two atmospheres, respectively, which can be cycled multiple times. Furthermore, LPL intensity undergoes switching between two different conditions as well, which can be visually discerned by the naked eye, enabling visual sensing of volatiles by LPL. This combination of photoluminescence and the visual LPL switching behavior of acids and bases in functional MOFs may provide an effective avenue for stimulus response, anticounterfeiting, and encryption applications.

Boosting hydrogen production of a MOF-based multicomponent photocatalyst with clean interface via facile one-pot electrosynthesis

Hydrogen production from photocatalysis via the usage of multicomponent photocatalysts represents a promising pathway for carbon peaking and carbon neutrality, owing to their structural advantages in dealing with the three crucial processes in photocatalysis, namely, light harvesting, charge transfer, and surface redox reactions. We demonstrate the fabrication of a MOF-based multicomponent photocatalyst, denoted as semiconductor/MOF/cocatalyst, by a one-pot electrochemical synthetic route. The as-fabricated multicomponent photocatalyst has a clean interface among the components, leading to close connections that contribute to high-quality heterojunction and facilitate photogenerated charge transfer and separation, thereby the efficient hydrogen evolution. The hydrogen production rate of the resultant ZrO2 /Zr-MOF/Pt is 1327 μmol ⋅ g-1  ⋅ h-1 , which is much higher than that of ZrO2 /Zr-MOF (15 μmol ⋅ g-1  ⋅ h-1 ) and pure Zr-MOF (10.1 μmol ⋅ g-1  ⋅ h-1 ), as well as the photodeposited-Pt products ZrO2 /Zr-MOF/PtPD (287 μmol ⋅ g-1  ⋅ h-1 ) and Zr-MOF/PtPD (192 μmol ⋅ g-1  ⋅ h-1 ) obtained by the step-wise synthetic approach. The work gives a good inspiration for the rational design and construction of MOF-based multicomponent photocatalysts through the one-pot electrosynthesis.

Anionic Ni-Based Metal-Organic Framework with Li(I) Cations in the Pores for Efficient C2H2/CO2 Separation

Acetylene (C2H2) is widely used as a raw material for producing various downstream commodities in the petrochemical and electronic industry. Therefore, the acquisition of high-purity C2H2 from a C2H2/CO2 mixture produced by partial methane combustion or thermal hydrocarbon cracking is of great significance yet highly challenging due to their similar physical and chemical properties. Herein, we report an anionic metal-organic framework (MOF) named LIFM-210, which has Li+ cations in the pores and shows a higher adsorption affinity for C2H2 than CO2. LIFM-210 is constructed by a unique tetranuclear Ni(II) cluster acting as a 10-connected node and an organic ligand acting as a 5-connected node. Single-component adsorption and transient breakthrough experiments demonstrate the good C2H2 selective separation performance of LIFM-210. Theoretical calculations revealed that Li+ ions strongly prefer C2H2 to CO2 and are primary adsorption sites, playing vital roles in the selective separation of C2H2/CO2.

Solvent-Directed Construction of a Nanoporous Metal-Organic Framework with Potential in Selective Adsorption and Separation of Gas Mixtures Studied by Grand Canonical Monte Carlo Simulations

In this report, a microporous metal-organic framework of [Ca(TDC)(DMA)]n (1) and a two-dimensional coordination polymer of [Ca(TDC)(DMF)2 ]n (2), (TDC2- =Thiophene-2,5-dicarboxylate, DMA=N, N'-dimethylacetamide and DMF=N, N'-dimethylformamide) based on Ca(II) were designed by the effect of solvent, and X-ray analysis was performed for the single crystals of 1 and 2. Then, compound 1 was synthesized in three different methods and identified with a set of analyses. Compared to other adsorbents, MOFs are widely used in the field of adsorption and separation of various gases due to a series of distinctive features such as diverse and adjustable structures pores with different dimensions, high porosity and surface area with regular distribution of active sites. Therefore, the ability of 1 to uptake single gases (CH4 , CO2 , C2 H2 , H2, and N2 ) and separation of several binary mixtures of gases (CO2 /CH4 , CO2 /N2 , CO2 /H2 and CO2 /C2 H2 ), were investigated using Grand Canonical Monte Carlo simulations. Volumetric and gravimetric adsorption isotherms in various operating conditions, the isosteric heat of adsorption (qst ), the chemical potential for each thermodynamic state, and snapshots during the simulation process were reported in all cases. The results obtained from the adsorption simulation indicate that compound 1 has a high capacity for uptake of H2 (16 mmol g-1 ) and N2 (12.5 mmol g-1 ), CO2 (6.6 mmol g-1 ), C2 H2 (5 mmol g-1 ) and CH4 (1.5 mmol g-1 ) gases at 1 bar. It also performs well in separating CO2 in binary mixtures, which can be attributed to the presence of open metal sites in nodes of 1 and their electrostatic tendency to interact with CO2 containing the higher quadrupole dipole moment compared to other components of the mixture.

Novel Hydrophobic Functionalized UiO-66 Series: Synthesis, Characterization, and Evaluation of Their Structural and Physical-Chemical Properties

A novel set of four functionalized hydrophobic UiO-66-NHR series were synthesized through postsynthetic procedures, utilizing various benzoyl chlorides and UiO-66-NH2 as starting materials. This synthesis method was carried out by employing p- (1) and o-toluoyl (2), as well as 2- (3) and 4-fluorobenzoyl (4) substituents. The analysis of the resulting compounds was performed using conventional spectroscopic methods such as FT-IR and 1H NMR to quantify the conversion rate into amide. Furthermore, SEM and XPS techniques were employed for morphological and surface analysis. Finally, the evaluation of the chemical stability and contact angle using the sessile drop method was performed to evaluate the technological potential of these compounds for application in aqueous and acidic media (such as selective separation of different metals and wastewater recovery).

Modulator-Dependent Dynamics Synergistically Enabled Record SO2 Uptake in Zr(IV) Metal-Organic Frameworks Based on Pyrene-Cored Molecular Quadripod Ligand

Developing innovative porous solid sorbents for the capture and storage of toxic SO2 is crucial for energy-efficient transportation and subsequent processing. Nonetheless, the quest for high-performance SO2 sorbents, characterized by exceptional uptake capacity, minimal regeneration energy requirements, and outstanding recyclability under ambient conditions, remains a significant challenge. In this study, we present the design of a unique tertiary amine-embedded, pyrene-based quadripod-shaped ligand. This ligand is then assembled into a highly porous Zr-metal-organic framework (MOF) denoted as Zr-TPA, which exhibits a newly discovered 3,4,8-c woy net structure. Remarkably, our Zr-TPA MOF achieved an unprecedented SO2 sorption capacity of 22.7 mmol g-1 at 298 K and 1 bar, surpassing those of all previously reported solid sorbents. We elucidated the distinct SO2 sorption behaviors observed in isostructural Zr-TPA variants synthesized with different capping modulators (formate, acetate, benzoate, and trifluoroacetate, abbreviated as FA, HAc, BA, and TFA, respectively) through computational analyses. These analyses revealed unexpected SO2-induced modulator-node dynamics, resulting in transient chemisorption that enhanced synergistic SO2 sorption. Additionally, we conducted a proof-of-concept experiment demonstrating that the captured SO2 in Zr-TPA-FA can be converted in situ into a valuable pharmaceutical intermediate known as aryl N-aminosulfonamide, with a high yield and excellent recyclability. This highlights the potential of robust Zr-MOFs for storing SO2 in catalytic applications. In summary, this work contributes significantly to the development of efficient SO2 solid sorbents and advances our understanding of the molecular mechanisms underlying SO2 sorption in Zr-MOF materials.

Enhanced Iodine Capture Using a Postsynthetically Modified Thione-Silver Zeolitic Imidazole Framework

Efficient management of radionuclides that are released from various processes in the nuclear fuel cycle is of significant importance. Among these nuclides, radioactive iodine (mainly 129I and 131I) is a major concern due to the risk it poses to the environment and to human health; thus, the development of materials that can capture and safely store radioactive iodine is crucial. Herein, a novel silver-thione-functionalized zeolitic imidazole framework (ZIF) was synthesized via postsynthetic modification and assessed for its iodine uptake capabilities alongside the parent ZIF-8 and intermediate materials. A solvent-assisted ligand exchange procedure was used to replace the 2-methylimidazole linkers in ZIF-8 with 2-mercaptoimidazole, forming intermediate compound ZIF-8 = S, which was reacted with AgNO3 to yield the ZIF-8 = S-Ag+ composite for iodine uptake. Despite possessing the lowest BET surface area of the derivatives, the Ag-functionalized material demonstrated superior I2 adsorption in terms of both maximum capacity (550 g I2/mol) and rapid kinetics (50% loading achieved in 5 h, saturation in 50 h) compared to that of our pristine ZIF-8, which reached 450 g I2/mol after 150 h and 50% loading in 25 h. This improvement is attributed to the presence of the Ag+ ions, which provide a strong chemical driving force to form a stable Ag-I species. The results of this study contribute to a broader understanding of the strategies that can be employed to engineer adsorbents with robust iodine uptake behavior.

Enhanced Gas Adsorption in HKUST-1@Chitosan Aerogels, Cryogels, and Xerogels: An Evaluation Study

This study investigates the use of chitosan hydrogel microspheres as a template for growing an extended network of MOF-type HKUST-1. Different drying methods (supercritical CO2, freeze-drying, and vacuum drying) were used to generate three-dimensional polysaccharide nanofibrils embedding MOF nanoclusters. The resulting HKUST-1@Chitosan beads exhibit uniform and stable loadings of HKUST-1 and were used for the adsorption of CO2, CH4, Xe, and Kr. The maximum adsorption capacity of CO2 was found to be 1.98 mmol·g-1 at 298 K and 1 bar, which is significantly higher than those of most MOF-based composite materials. Based on Henry's constants, thus-prepared HKUST-1@CS beads also exhibit fair selectivity for CO2 over CH4 and Xe over Kr, making them promising candidates for capture and separation applications.

Halogen-Dependent Diversity and Weak Interactions in the Heterometallic Ni/Cd Complex Solids: Structural and Theoretical Investigation

Three novel heterometallic Ni/Cd coordination compounds [Ni(en)3][CdCl4]∙3dmso (1), [Ni(en)2(dmf)2][CdBr4] (2), and [Ni(en)3]2[CdI4](I)2 (3) have been synthesized through the self-assembly process in a one-pot reaction of cadmium oxide, nickel salt (or nickel powder), NH4X (X = Cl, Br, I), and ethylenediamine in non-aqueous solvents dmso (for 1) or dmf (for 2 and 3). Formation of the one- (1) or three-dimensional (2 and 3) hydrogen-bonded frameworks has been observed depending on the nature of the [CdX4]2- counter-anion, as well as on the nature of the solvent. The electronic structures of [Ni(en)3]2+ and [Ni(en)2(dmf)2]2+ cations were studied at the DFT and CASSCF levels, including the ab initio ligand field theory (AILFT) calculations. The non-covalent intermolecular contacts between the cationic nickel and anionic cadmium blocks in the solid state were investigated by the QTAIM analysis. The mechanism of ligand substitution at the nickel center in [Ni(en)2(dmf)2]2+ was theoretically investigated at the ωB97X-D4/ma-def2-TZVP//DLPNO-CCSD(T)/ma-def2-TZVPP level. The results demonstrate that thermodynamic factors are structure-determining ones due to low energy barriers of the rotation of dmf ligands in [Ni(en)2(dmf)2]2+ (below 3 kcal mol-1) and the reversible transformation of [Ni(en)2(dmf)2]2+ into [Ni(en)3]2+ (below 20 kcal mol-1).

Metal-organic frameworks (MOFs) for energy production and gaseous fuel and electrochemical energy storage applications

The increasing energy demands in society and industrial sectors have inspired the search for alternative energy sources that are renewable and sustainable, also driving the development of clean energy storage and delivery systems. Various solid-state materials (e.g., oxides, sulphides, polymer and conductive nanomaterials, activated carbon and their composites) have been developed for energy production (water splitting-H2 production), gaseous fuel (H2 and CH4) storage and electrochemical energy storage (batteries and supercapacitors) applications. Nevertheless, the low surface area, pore volume and conductivity, and poor physical and chemical stability of the reported materials have resulted in higher requirements and challenges in the development of energy production and energy storage technologies. Thus, to overcome these issues, the development of metal-organic frameworks (MOFs) has attracted significant attention. MOFs are a class of porous materials with extremely high porosity and surface area, structural diversity, multifunctionality, and chemical and structural stability, and thus they can be used in a wide range of applications. In the present review, we precisely discuss the interesting properties of MOFs and the various methodologies for their synthesis, and also the future dependence on the valorization of solid waste for the recovery of metals and organic ligands for the synthesis of new classes of MOFs. Subsequently, the utilization of these interesting characteristics for energy production (water splitting), storage of gaseous fuels (H2 and CH4), and electrochemical storage (batteries and supercapacitors) applications are described. However, although MOFs are efficient materials with versatile uses, they still have many challenges, limiting their practical applications. Therefore, finally, we highlight the challenges associated with MOFs and show the way forward in overcoming them for the development of these highly porous materials with large-scale practical utility.

Electronic Structure and d-d Spectrum of Metal-Organic Frameworks with Transition-Metal Ions

The electronic structure of metal-organic frameworks (MOFs) containing transition metal (TM) ions represents a significant and largely unresolved computational challenge due to limited solutions to the quantitative description of low-energy excitations in open d-shells. These excitations underpin the magnetic and sensing properties of TM MOFs, including the observed remarkable spin-crossover phenomenon. We introduce the effective Hamiltonian of crystal field approach to study the d-d spectrum of MOFs containing TM ions; this is a hybrid QM/QM method based on the separation of crystal structure into d- and s,p-subsystems treated at different levels of theory. We test the method on model frameworks, carbodiimides, and hydrocyanamides and a series of M-MOF-74 (M = Fe, Co, Ni) and compare the computational predictions to experimental data on magnetic properties and Mössbauer spectra.

Exploring the potential of iron-based metal-organic frameworks as peroxidase nanozymes for glucose detection with various secondary building units

Finding materials in biosensing that balance enzyme-like reactivity, stability, and affordability is essential for the future. Because of their unique peroxidase properties, including variable pore size, surface area, and Lewis acid active sites, iron-based metal-organic frameworks (MOFs) have evolved as viable possibilities. In this study, we constructed a Fe-MOF and tested its peroxidase-like activity and responsiveness toward H2O2 colorimetric techniques. Using encapsulation, we incorporated glucose oxidase into the ZIF-90 PVP MOF and conducted a sequential reaction with the Fe-MOF to detect glucose. The results showed better peroxidase catalytic activity of the MIL-88B(Fe) (1,4-NDC) MOF and similar secondary building unit (SBU) Fe-MOFs were studied in other peroxidase nanozyme studies. When combined with an enzyme-encapsulating ZIF-90 PVP MOF, they could be sequentially employed for glucose detection purposes. This study highlights the potential of nanozymes as an alternative to natural enzymes, with promising applications in biosensing and beyond.

Polynuclear Rare-Earth Cluster-Directed Self-Assembly of Highly Porous Zeolite-like Metal-Organic Frameworks with Methane Storage Property

Due to their intrinsic structural features, the design and synthesis of a new type of zeolite-like metal-organic frameworks (ZMOFs) is highly desirable but challenging. Herein, solvothermal reactions between an angular dicarboxylate linker and rare-earth (RE) ions afforded two RE-MOFs, namely, Tb-ZMOF-2 and Tb-ZMOF-3, respectively. Structural analyses reveal that Tb-ZMOF-2 encompasses a novel [446482] cage, while Tb-ZMOF-3 contains nonanuclear (i.e., D6R) and hexanuclear (i.e., D4R) RE clusters simultaneously, subsequently resulting in two new zeolitic topologies. Thanks to its high surface area and pore volume, Tb-ZMOF-2 demonstrates considerably high gravimetric and volumetric methane storage working capacities.

Highly Sensitive Ratiometric Fluorescent Flexible Sensor Based on the RhB@ZIF-8@PVDF Mixed-Matrix Membrane for Broad-Spectrum Antibiotic Detection

Antibiotics play an essential role in the treatment of various diseases. However, the overuse of antibiotics has led to the pollution of water bodies and food safety, affecting human health. Herein, we report a dual-emission MOF-based flexible sensor for the detection of antibiotics in water, which was prepared by first encapsulating rhodamine B (RhB) by a zeolite imidazolium ester skeleton (ZIF-8) and then blending it with polyvinylidene difluoride (PVDF). The luminescent properties, structural tunability, and flexible porosity of the MOF-based composites were combined with the processability and flexibility of polymers to prepare luminescent membranes. The sensor is capable of dual-emission ratiometric fluorescence sensing of nitrofurantoin (NFT) and oxytetracycline (OTC), exhibiting sensitive detection of fluorescence burst and fluorescence enhancement, respectively, with detection limits of 0.012 μM and 8.9 nM. With the advantages of visual detection, high sensitivity, short detection time, and simplicity, the highly sensitive ratiometric fluorescent flexible sensor has great potential for detecting antibiotics in an aqueous environment. It will further stimulate interest in luminescent MOF-based mixed matrix membranes and their sensing applications.