Influence of pollution control on lead inhalation bioaccessibility in PM2.5: A case study of 2014 Youth Olympic Games in Nanjing

Magnetic response and bioaccessibility of toxic metal pollution in outdoor dustfall in Shanghai, China

Toxic metal content testing, environmental magnetic monitoring and in vitro bioaccessibility experiments each have their own advantages and are often used independently for environmental monitoring, but there are few studies that combine the three to evaluate the hazards of toxic metals to humans. This paper investigated the total content, magnetic properties and bioaccessibility of nine potentially toxic metal elements (Zn, Sn, Pb, Cu, Fe, Ni, Cr, Sr, Mn) in dustfall from different functional zones in Shanghai, China, and systematically compared the related results. The results show that these nine metal elements have different degrees of contamination and enrichment in outdoor dustfall, and their content distribution shows the following trend: Zn > Sn > Pb > Cu > Fe > Ni > Cr > Sr > Mn. Magnetic characteristics χlf and SIRM are mostly positively correlated with the metal elements, indicating that the higher the content of magnetic minerals in the sample, the higher the concentration of metal elements. It was also found that χlf, SIRM, and χARM can well reflect the characteristics of dustfall pollution. The magnetic minerals have a certain degree of enrichment, and the particle size of the magnetic minerals is relatively coarse, mainly in the form of coarse multi-domain and pseudo-single-domain particles, which are largely derived from anthropogenic pollution. The χlf and PM10 concentrations in the precipitation show relatively similar spatial trends, so χlf, SIRM, and χARM can be used as air pollution indices to facilitate the evaluation of metal elements pollution in dustfall. The overall trend in gastric bioaccessibility is Pb > Zn > Mn > Cu > Cr. Due to the increase in the pH of digestive fluid, the bioavailability of toxic metals decreases significantly from the gastric stage to the intestinal stage. χlf, SIRM, and χARM/SIRM are all related to the bioaccessibility of toxic metals in the intestinal stage, so they can be used as toxicity indicators to evaluate the bioaccessibility of toxic metals in dustfall.

Dissecting the Photochemical Reactivity of Metal Ions during Atmospheric Nitrate Transformations on Photoactive Mineral Dust

Dissecting the photochemical reactivity of metal ions is a significant contribution to understanding secondary pollutant formation, as they have a role to be reckoned with atmospheric chemistry. However, their photochemical reactivity has received limited attention within the active nitrogen cycle, particularly at the gas-solid interface. In this study, we delve into the contribution of magnesium ion (Mg2+) and ferric ion (Fe3+) to nitrate decomposition on the surface of photoactive mineral dust. Under simulated sunlight irradiation, the observed NOX production rate differs by an order of magnitude in the presence of Mg2+ (6.02 × 10-10 mol s-1) and Fe3+ (2.07 × 10-11 mol s-1). The markedly decreased fluorescence lifetime induced by Mg2+ and the change in the valence of Fe3+ revealed that Mg2+ and Fe3+ significantly affect the concentration of nitrate decomposition products by distinct photochemical reactivity with photogenerated electrons. Mg2+ promotes NOX production by accelerating charge transfer, while Fe3+ hinders nitrate decomposition by engaging in a redox cyclic reaction with Fe2+ to consume photogenerated carriers continuously. Furthermore, when Fe3+ coexists with other metal ions (e.g., Mg2+, Ca2+, Na+, and K+) and surpasses a proportion of approximately 12%, the photochemical reactivity of Fe3+ tends to be dominant in depleting photogenerated electrons and suppressing nitrate decomposition. Conversely, below this threshold, the released NOX concentration increases sharply as the proportion of Fe3+ decreases. This research offers valuable insights into the role of metal ions in nitrate transformation and the generation of reactive nitrogen species, contributing to a deep understanding of atmospheric photochemical reactions.

The new WHO air quality guidelines for PM2.5: predicament for small/medium cities

The global burden of disease estimated that approximately 7.1 million deaths worldwide were related to air pollution in 2016. However, only a limited number of small- and middle-sized cities have air quality monitoring networks. To date, air quality in terms of particulate matter is still mainly focused on mass concentration, with limited compositional monitoring even in mega cities, despite evidence indicating differential toxicity of particulate matter. As this evidence is far from conclusive, we conducted PM_2.5 bioaccessibility studies of potentially harmful elements in a medium-sized city, Londrina, Brazil. The data was interpreted in terms of source apportionment, the health risk evaluation and the bioaccessibility of inorganic contents in an artificial lysosomal fluid. The daily average concentration of PM_2.5 was below the WHO guideline, however, the chemical health assessment indicated a considerable health risk. The in vitro evaluation showed different potential mobility when compared to previous studies in large-sized cities, those with 1 million inhabitants or more (Curitiba and Manaus). The new WHO guideline for PM_2.5 mass concentration puts additional pressure on cities where air pollution monitoring is limited and/or neglected, because decision making is mainly revenue-driven and not socioeconomic-driven. Given the further emerging evidence that PM chemical composition is as, or even more, important than mass concentration levels, the research reported in the paper could pave the way for the necessary inter- and intra-city collaborations that are needed to address this global health challenge.

Impact of reduced anthropogenic emissions on chemical characteristics of urban aerosol by individual particle analysis

A single particle aerosol mass spectrometer was deployed in a heavily polluted area of China during a coronavirus lockdown to explore the impact of reduced anthropogenic emissions on the chemical composition, size distributions, mixing state, and secondary formation of urban aerosols. Ten particle groups were identified using an adaptive resonance network algorithm. Increased atmospheric oxidation during the lockdown period (LP) resulted in a 42.2%-54% increase in the major NaK-SN particle fraction relative to the normal period (NP). In contrast, EC-aged particles decreased from 31.5% (NP) to 23.7% (LP), possibly due to lower emissions from motor vehicles and coal combustion. The peak particle size diameter increased from 440 nm during the NP to 500 nm during LP due to secondary particle formation. High proportions of mixed 62NO3- indicate extensive particle aging. Correlations between secondary organic (43C2H3O+, oxalate) and secondary inorganic species (62NO3-, 97HSO4- and 18NH4+) versus oxidants (Ox = O3 + NO2) and relative humidity (RH) indicate that increased atmospheric oxidation promoted the generation of secondary species, while the effects of RH were more complex. Differences between the NP and LP show that reductions in primary emissions had a remarkable impact on the aerosol particles. This study provides new insights into the effects of pollution emissions on atmospheric reactions and the specific aerosol types in urban regions.

Seasonal variation of dissolved bioaccessibility for potentially toxic elements in size-resolved PM: Impacts of bioaccessibility on inhalable risk and uncertainty

The health effects of potentially toxic elements (PTEs) in airborne particulate matter (PM) are strongly dependent on their size distribution and dissolution. This study examined PTEs within nine distinct sizes of PM in a Chinese megacity, with a focus on their deposited and dissolved bioaccessibility in the human pulmonary region. A Multiple Path Particle Dosimetry (MPPD) model was used to estimate the deposited bioaccessibility, and an in-vitro experiment with simulated lung fluid was conducted for dissolved bioaccessibility. During the non-heating season, the dissolved bioaccessible fraction (DBF) of As, Cd, Co, Cr, Mn, Pb and V were greater in fine PM (aerodynamics less than 2.1 μm) than in coarse PM (aerodynamics between 2.1 and 10 μm), and vice versa for Ni. With the increased demand of heating, the DBF of Pb and As decreased in fine particle sizes, probably due to the presence of oxide/silicate compounds from coal combustion. Inhalation health risks based on the bioaccessible concentrations of PTEs displayed the peaks in <0.43 μm and 2.1-3.3 μm particulate sizes. The non-cancer risk was at an acceptable level (95th percentiles of hazard index (HI) was 0.49), but the cancer risk exceeded the threshold value (95th percentiles of total incremental lifetime cancer risk (TCR) was 8.91 × 10^-5). Based on the results of uncertainty analysis, except for the exposure frequency, the total concentrations and DBF of As and Cr in <0.43 μm particle size segment have a greater influence on the uncertainty of probabilistic risk.

Inhalation Bioaccessibility and Risk Assessment of Metals in PM2.5 Based on a Multiple-Path Particle Dosimetry Model in the Smelting District of Northeast China

PM2.5 can deposit and partially dissolve in the pulmonary region. In order to be consistent with the reality of the pulmonary region and avoid overestimating the inhalation human health risk, the bioaccessibility of PM2.5 heavy metals and the deposition fraction (DF) urgently needs to be considered. This paper simulates the bioaccessibility of PM2.5 heavy metals in acidic intracellular and neutral extracellular deposition environments by simulating lung fluid. The multipath particle dosimetry model was used to simulate DF of PM2.5. According to the exposure assessment method of the U.S. Environmental Protection Agency, the inhalation exposure dose threshold was calculated, and the human health risk with different inhalation exposure doses was compared. The bioaccessibility of heavy metals is 12.1−36.2%. The total DF of PM2.5 in adults was higher than that in children, and children were higher than adults in the pulmonary region, and gradually decreased with age. The inhalation exposure dose threshold is 0.04−14.2 mg·kg−1·day−1 for the non-carcinogenic exposure dose and 0.007−0.043 mg·kg−1·day−1 for the carcinogenic exposure dose. Cd and Pb in PM2.5 in the study area have a non-carcinogenic risk to human health (hazard index < 1), and Cd has no or a potential carcinogenic risk to human health. A revised inhalation health risk assessment may avoid overestimation.

A simple electrochemiluminesecence aptasenor using a GCE/NCQDs/aptamers for detection of Pb

An electrochemiluminescence (ECL) aptasensor was prepared to detect Pb²⁺ with nitrogen-doped carbon quantum dots (NCQDs) as ECL materials. To prepare the working electrode, NCQDs with carboxyl groups were loaded on a glassy carbon electrode (GCE) and then Pb²⁺ aptamers were covalently bound to the NCQDs to form a stable GCE/NCQDs/aptamers. On addition of Pb²⁺, the chain aptamers change to a pb²⁺ G-quadruplex conformation, which lead to a large decrease in the ECL intensity. The variation of intensity and the logarithm of the Pb²⁺ concentration had a good linear relationship (R² = 0.998). The detection range was wide (50 pM to 387.9 nM) with a low detection limit (18.9 pM). In interference experiments, the ECL Pb²⁺ aptasensor did not suffer from interference and it had good stability. The NCQDs ECL aptasensor can detect Pb²⁺ quickly and accurately, and provides a fast and efficient method for detection of Pb²⁺. Compared with literatures, the Pb²⁺ aptasensor has simpler preparation process, lower cost; furthermore, it is more environmentally friendly.

Comparison of oxidative potential of PM1 and PM2.5 urban aerosol and bioaccessibility of associated elements in three simulated lung fluids

PM1 and PM2.5 aerosol samples collected during four seasons were analysed for bioaccessibility of 21 elements and oxidative potential (OP) determined by the dithiothreitol (DTT) assay in three simulated lung fluids (SLFs): deionised water, simulated alveoli fluid and Gamble's solution. Most elements had higher bioaccessibility in the submicron fraction than in the fine size fraction. The bioaccessibility of the element not only depends on the aerosol size fraction, but also varies between the three SLFs. In addition, the bioaccessibility of elements depends on both their chemical compound and the composition of the SLF. A very high bioaccessibility (up to 98%) was observed for As, Sb and Cd in all studied SLFs. The lowest bioaccessibility was observed for Ti, Al and Fe. The OP of urban particulate matter (PM), was studied as a relevant metric for health effects. The difference of OP value in simulated alveoli fluid and Gamble's solution compared to deionised water indicate the crucial effect of individual SLFs' composition on the OP. The complexation of elements with different ligands present in the solution can influence OP_DTT depletion and, therefore, the potential health effects of inhaled aerosol. The correlation coefficients between total or bioaccessible concentrations of studied elements and volume normalised OP were calculated to examine the relationship between the elements and the OP. The strong positive correlations between some elements (i.e. Cd, Pb, As, Zn, Sn, Cu, Co, Ni, Mn) and DTT activity suggest their participation in the oxidative activity of PM.

Effect of Soil Properties and Aging Time on Oral and Inhalation Bioaccessibility of Copper Oxide Nanoparticles in Soils

In this study, soils spiked with copper oxide nanoparticles (CuO NPs) or Cu(NO₃)₂ and aged as long as 90 days were utilized to investigate effect of soil properties and aging on oral and inhalation bioaccessibility of CuO NPs. Results showed that oral bioaccessibility of CuO NPs in gastric phase (GP) ranged from 70% to 84%, it significantly decreased to 50%-70% in intestinal phase (IP). The inhalation bioaccessibility of CuO NPs in artificial lysosomal fluid (ALF) ranged from 66% to 85%, and much higher than that in Gamble's solution (GS, 3.3%-23%). By comparing CuO NPs to Cu(NO₃)₂ bioaccessibility, insignificant difference was found. The aging time (D15 and D90) had limited effect on their oral and inhalation bioaccessibility. CEC and free Al were positively and clay content was negatively correlated with CuO NPs inhalation bioaccessibility, while Cu(NO₃)₂ inhalation bioaccessibility decreased with increasing soil clay content and pH. Our findings provide an essential basis to evaluate the human health risks of CuO NPs.

Inhalation bioaccessibility, health risk assessment, and source appointment of ambient PM2.5-bound polycyclic aromatic hydrocarbons (PAHs) in Caofeidian, China

The inhalation bioaccessibility of polycyclic aromatic hydrocarbons (PAHs) is significant for accurately assessing the health risks posed by PM_2.5-bound PAHs. In this study, 96 PM_2.5 samples from Caofeidian, China, were investigated for PM_2.5-bound PAH source appointment and bioaccessibility assessment during four seasons. PAH₁₈ potential sources were identified by positive matrix factorization. The inhalation bioaccessibility of PAH₁₈ was investigated by simulated epithelial lung fluid extraction. The incremental lifetime cancer risk (ILCR) model was subsequently used to evaluate the carcinogenic risk posed by PM_2.5-bound PAHs in children, teenagers, and adults. Four potential sources of PM_2.5-bound PAH₁₈ were identified: industry emissions (44%), petroleum volatilization (30%), vehicle emissions (15%), and coal combustion (11%). The average inhalation bioaccessibility of PAHs ranged from 17.8% (dibenzo [a,h] anthracene) to 67.9% (fluorene). The ILCR values for children and teenagers were lower than the acceptable levels (10^-6) in the four seasons considering inhalation bioaccessibility. However, the ILCR value of adults was higher than the threshold in winter (1.26 × 10^-6). Source identification suggested that reducing industrial pollution was the primary measure for controlling PM_2.5-bound PAHs in Caofeidian. Additionally, the inhalation bioaccessibility of PM_2.5-bound PAHs was evaluated to precisely estimate the health risks caused by PAHs.

In vitro assessments of bioaccessibility and bioavailability of PM2.5 trace metals in respiratory and digestive systems and their oxidative potential

Air pollution is a serious environmental issue. As a key aerosol component, PM_2.5 associated toxic trace metals pose significant health risks by inhalation and ingestion, but the evidences and mechanisms were insufficient and not well understood just by their total environmental concentrations. To accurately assess the potential risks of airborne metals, a series of in vitro physiologically based tests with synthetic human lung and gastrointestinal fluids were conducted to assess both the bioaccessibility and bioavailability of various PM_2.5 bound metals in the respiratory and digestive systems from both urban and industrial areas of Nanjing city. Moreover, the chemical acellular toxicity test [dithiothreitol (DTT) assay] and source analysis were performed. Generally, the bioaccessibility and bioavailability of investigated metals were element and body fluid dependent. Source oriented metals in PM_2.5 showed diverse bioaccessibility in different human organs. The PM_2.5 induced oxidative potential was mainly contributed by the bioaccessible/bioavailable transition metals such as Fe, Ni and Co from metallurgic dust and traffic emission. Future researches on the toxicological mechanisms of airborne metals incorporating the bioaccessibility, bioavailability and toxicity tests are directions.

Metal(loid) bioaccessibility of atmospheric particulate matter from mine tailings at Zimapan, Mexico

Metal(loid)s are contaminants of concern emitted as particulate matter (PM) from several pollution sources. The objective was to characterize potential exposure from local airborne metal(loid)s in a community in proximity to mine tailings. Air samples were collected weekly at five sites around the municipal mine tailings using two Hi-volume samplers for simultaneously collecting PM10 and PM2.5. Total suspended particulates (TSP), concentrations, speciation, and bioaccessibility of metal(loid)s were quantified. The size and form of particles were determined by scanning electron microscopy. The concentration of TSP (μg m-3) in the airborne samples ranged from 21.2 to 64.6 for PM2.5 and 23.6 to 80.1 for PM10. The profiles of analyzed quasi-total metal(loid) concentration from all sampling sites were similar between these aerosols PM sizes except at site 2 for Cd, at site 3 for Cu, and site 4 for Zn. The order of quasi-total metal(loid) concentration, in the airborne samples for both PM sizes, was As > Zn > Fe > Pb > Cu > Mn > Cd. As speciation included As-sulfite, As(III)-O, and As(V)-O with less concentration of As(III)-O in both PM sizes. Bioaccessible metal(loid) concentrations were very high and represented a great percentage from the quasi-total airborne concentrations, for instance, 10% and 37% for Pb and 8% and 6% for As in pulmonary and gastric bioaccessible concentrations, respectively. Knowing the toxic effects of these pollutants, there is an urgent need to establish environmental regulation of bioaccessible pollutant concentrations from PM dislodged from uncovered metal(loid) mine tailings affecting not only nearby human populations but also possible long-distance ecosystem transport.

Sources, environmental levels, and health risks of PM2.5-bound polycyclic aromatic hydrocarbons in energy-producing cities in northern China

We collected 170 samples of airborne fine particulate matter from five coal-producing cities and one oil-producing city in northern China during both heating and non-heating periods to quantify the concentrations of 12 polycyclic aromatic hydrocarbons, estimate their bioaccessible fraction, and calculate the incremental lifetime cancer risk (ILCR) of this fraction. The major sources of the particulate matter were analyzed using the chemical mass balance model. We found that the main emission sources were coal combustion during the heating period and open sources during the non-heating period. The ILCR was initially calculated as 2.65 × 10^-9 for coal-producing cities and 4.60 × 10^-9 for the oil-producing city during the heating period and 1.17 × 10^-8 and 3.34 × 10^-8, respectively, during the non-heating period. When only the bioaccessible fraction was used, the ILCR in coal-producing cities and the oil-producing city decreased by 87.2% and 82.1%, respectively, for the heating period and by 89.0% and 80.1%, respectively, for the non-heating period. The findings suggest that bioaccessibility should be considered when assessing the carcinogenic risk of polycyclic aromatic hydrocarbons. This study provides insights into the contribution of major emission sources to air pollution related to the long-term exploitation, transportation, and use of coal and oil.

New Insights into Health Risk Assessments for Inhalational Exposure to Metal(loid)s: The Application of Aqueous Chemistry Modelling in Understanding Bioaccessibility from Airborne Particulate Matter

Aqueous modelling of chemical speciation in simulated lung fluid (SLF) enables a better understanding of the underlying chemical factors that influence metal(loid) inhalation bioaccessibility from airborne particulate matter. Such an approach can be used to supplement experimental techniques that are integral to the health risk assessment of metal(loid) exposure by inhalational routes. In this paper, we modelled the aqueous chemistry of airborne particulate-bound metal(loid)s (As, Cu, Mn, Pb and Zn) in a SLF based on Gamble’s solution (neutral pH). The modelling was performed using two software packages (Geochemist’s Workbench 14 and OLI Studio 9.5) and a total of five thermochemical databases (GWB Thermo, MINTEQ, PHREEQC, WATEQ4F and the default database for OLI Studio). Modelled results were compared with experimentally determined bioaccessibilities for the NIST 2710a standard reference material (SRM) and with literature-reported bioaccessibilities for NIST 1648a and BCR 038 SRMs. Whilst the models correctly describe the observed increase in bioaccessibility for more dilute solid/liquid extraction ratios, the performance of the models against the fractional bias of the mean (FBmean) and the normalised mean square error (NMSE) statistical metrics was generally outside the acceptance criteria. Findings from an analysis of the main aqueous chemical species predicted to be present in SLF indicate that carbonate and chloride complexes of Cu, Mn, Pb and Zn predominate, whilst free cations (for Cu, Mn and Zn) and hydroxides (for Cu) also play a role in solubilisation. Arsenic is not predicted to form significant complexes with the SLF components and is present in solution mainly as the HAsO42− ion and its conjugate acid, H2AsO4−. For modelled runs where glycine and citrate were present, significant increases in the bioavailability of Cu and Zn were predicted as a result of complexation with these ligands. An additional finding from our experimental bioaccessibility results for NIST 2710a was that the inclusion of the lung fluid surfactant dipalmitoylphosphatidylcholine (DPPC) in the SLF did not significantly affect the bioaccessibility. Our study provides useful insights into the likely aqueous- and solid-phase speciation of metal(loid)s in SLF and highlights that future developments in this area should consider the role of mineralogy and surface interactions.

Chemical compositions and source apportionment of PM2.5 during clear and hazy days: Seasonal changes and impacts of Youth Olympic Games

Seasonal changes in chemical compositions and source apportionment of PM_2.5 during clear and hazy days help to develop effective control policy, but limited information is available in megacity Nanjing. In this study, 102 PM_2.5 samples were collected during clear and hazy days from 4 seasons in 2014-2015. Their chemical compositions (organic and elemental carbon, 8 water-soluble ions, and 22 inorganic elements) were determined, which were used for PM_2.5 source apportionment using the PMF model. The mean PM_2.5 concentration was lower during clear days than hazy days (42 vs. 122 μg m^-3), so were mean concentrations of metals (0.48 vs. 0.82 ng m^-3 for Co and 2.0 vs. 2.4 μg m^-3 for Na), water soluble ions (0.10 vs. 0.16 μg m^-3 for Mg²⁺ and 12 vs. 23 μg m^-3 for SO₄^2-), and carbon species (3.2 vs. 5.4 μg m^-3 for elemetal C and 20 vs. 35 μg m^-3 for organic C). Based on the PMF model, five main sources of PM_2.5 were identified including secondary aerosols (31%), coal combustion (27%), road & construction dust (26%), oil combustion (8.5%), and iron & steel industry (5.1%) for all samples. The PM_2.5 concentrations from the 5 sources were 0.01-46.5, averaging 9.8 μg m^-3 during clear days (PM_2.5 < 75 μg m^-3), which increased to 1.83-60.1, averaging 18 μg m^-3 during hazy days. However, based on their contributions to PM_2.5, only secondary aerosols increased during hazy days compared to clear days in all seasons (11 vs. 42%), indicating its dominant contribution to haze in Nanjing. For different seasons, road & construction dust was a major contributor to PM_2.5 in the summer, while oil combustion (4.86 vs.16.8%) contributed more in spring. However, coal combustion became the main source of PM_2.5 during the summer (44-85%) due to the pollution controls for the Youth Olympic Games. Our results suggest that secondary aerosols play an important role in haze formation and season-dependent pollution measures should be implemented for effective control of air pollution.

Bioaccessibilities of metal(loid)s and organic contaminants in particulates measured in simulated human lung fluids: A critical review

Particle-bound pollutants can pose a health risk to humans. Inhalation exposure evaluated by total contaminant concentrations significantly overestimates the potential risk. To assess the risk more accurately, bioavailability, which is the fraction that enters into the systemic circulation, should be considered. Researchers have replaced bioavailability by bioaccessibility due to the rapid and cost-efficient measurement for the latter, especially for assessment by oral ingestion. However, contaminants in particulates have different behavior when inhaled than when orally ingested. Some of the contaminants are exhaled along with exhalation, and others are deposited in the lung with the particulates. In addition, a fraction of the contaminants is released into the lung fluid and absorbed by the lung, and another fraction enters systemic circulation under the action of cell phagocytosis on particulates. Even if the release fraction, i.e., release bioaccessibility, is considered, the measurement faces many challenges. The present study highlights the factors influencing release bioaccessibility and the incorporation of inhalation bioaccessibility into the risk assessment of inhaled contaminants. Currently, there are three types of extraction techniques for simulated human lung fluids, including simple chemical solutions, sequential extraction techniques, and physiologically based techniques. The last technique generally uses three kinds of solution: Gamble's solution, Hatch's solution, and artificial lysosomal fluid, which are the most widely used physiologically based simulated human lung fluids. External factors such as simulated lung fluid composition, pH, extraction time, and sorption sinks can affect release bioaccessibility, whereas particle size and contaminant properties are important internal factors. Overall, release bioaccessibility is less used than bioaccessibility considering the deposition fraction when assessing the risk of contaminants in inhaled particulates. The release bioaccessibility measurement poses two main challenges: developing a unified, accurate, stable, simple, and systematic biologically based method, and validating the method through in-vivo assays.

Bioaccessiblity and exposure assessment of PM2.5- and PM10-bound rare earth elements in Oil City, Northeast China

In this study, an in vitro method was used to simulate lung fluids [Artificial lysosomal fluid (ALF) and Gamble's solution (GS)] to assess how the bioaccessibility of rare earth elements (REEs) in airborne particulate matter (PM) affects human health. Airborne PM samples (PM₁₀ and PM_2.5) were collected in Daqing in Northeast China. The bioaccessible proportions determined for REEs in PM₁₀ and PM_2.5 had high variability, which can be attributable to the heterogenic feature of airborne PM and its components, as well as sampling time. Overall, the bioaccessiblity of the REEs in the airborne PM samples was time-dependent. The bioaccessiblity of the REEs varied in PM with different sizes, and it was an order of magnitude higher in ALF than in GS. During both heavy and light pollution, the bioaccessiblity of the REEs in PM_2.5 was higher than in PM₁₀ after 24 h of ALF extraction, whereas bioaccessiblity of the REEs in GS followed the opposite trend. The REEs associated with airborne PM had much greater bioaccessiblity as the exposure time increased. The results of this study emphasize the necessity of conducting bioaccessibility experiments with field samples for the proper evaluation of human health risks.

Atomic Absorption Spectrometry Methods to Access the Metal Solubility of Aerosols in Artificial Lung Fluid

Recent studies to quantify the health risks that fine particulate matter with an aerodynamic less than 2.5 µm (PM_2.5) pose use in vitro approaches. One of these approaches is to incubate PM_2.5 in artificial lysosomal fluid for a given period at body temperature. These body fluids used have a high ionic strength and as such can be challenging samples to analyze with atomic spectroscopy techniques. As PM_2.5 is a primary health hazard because it is tiny enough to penetrate deep into the lungs and could, in addition, dissolve in the lung fluid it is important to quantify elements of toxic and/or carcinogenic concerns, reliably and accurately. Sophisticated instrumentation and expensive pre-treatment of challenging samples are not always available, especially in developing countries. To evaluate the applicability of graphite furnace atomic absorption spectrometry (GFAAS) without Zeeman correction capability to detect trace quantities of heavy metals leached from PM_2.5 on to artificial lung fluid, univariate and multivariate approaches have been used for optimization purposes. The limits of quantification, LOQ, obtained by the optimized method were: 2 µg L^-1 (Cu), 3 µg L^-1 (Cr), 1 µg L^-1 (Mn), and 10 µg L^-1 (Pb). The addition/recovery experiments had a mean accuracy of: (Cu) 99 ± 7%; 110 ± 8% (Cr); 95 ± 9% (Mn), and 96 ± 11% (Pb). The average soluble fractions of PM_2.5 incubated in artificial lysosomal fluid (ALF) for 1 h were: 1.2 ± 0.01 ng m^-3 Cu, 0.4 ± 0.01 ng m^-3 Cr, 0.6 ± 0.01 ng m^-3 Mn, and 4.8 ± 0.03 ng m^-3 Pb. Using historical elemental averages of PM_2.5 in Curitiba (Cu 3.3 ng m^-3, Cr 2.1 ng m^-3, Mn 6.1 ng m^-3, Pb 21 ng m^-3), the percentage bioaccessibility were determined to be Cu 38%, Cr 20%, Mn 10%, and Pb 23%. The elemental values of the atmospheric soluble fraction of Cu, Cr, and Mn were below the inhalation risk concentrations. However, for Pb, the atmospheric soluble fraction exceeded the inhalation unit risk of 0.012 ng m^-3. This robust and straightforward GF AAS method is pivotal for low and middle-income countries were most air pollution adverse effects occur and established lower-cost technologies are likely unavailable.

Air quality intervention during the Nanjing youth olympic games altered PM sources, chemical composition, and toxicological responses

Ambient particulate matter (PM) is a leading global environmental health risk. Current air quality regulations are based on airborne mass concentration. However, PM from different sources have distinct chemical compositions and varied toxicity. Connections between emission control measures, air quality, PM composition, and toxicity remain insufficiently elucidated. The current study assessed the composition and toxicity of PM collected in Nanjing, China before, during, and after an air quality intervention for the 2014 Youth Olympic Games. A co-culture model that mimics the alveolar epithelium with the associated macrophages was created using A549 and THP-1 cells. These cells were exposed to size-segregated inhalable PM samples. The composition and toxicity of the PM samples were influenced by several factors including seasonal variation, emission sources, and the air quality intervention. For example, we observed a size-dependent shift in particle mass concentrations during the air quality intervention with an emphasized proportion of smaller particles (PM_2.5) present in the air. The roles of industrial and fuel combustion and traffic emissions were magnified during the emission control period. Our analyses revealed that the PM samples demonstrated differential cytotoxic potencies at equal mass concentrations between sampling periods, locations, and time of day, influenced by variations in the predominant emission sources. Coal combustion and industrial emissions were the most important sources affecting the toxicological responses and displayed the least variation in emission contributions between the sampling periods. In conclusion, emission control mitigated cytotoxicity and oxidative stress for particles larger than 0.2 μm, but there was inadequate evidence to determine if it was the key factor reducing the harmful effects of PM_0.2.

Oral antimicrobial activity weakened in children with electronic waste lead exposure

Environmental lead (Pb) exposure can induce dysbacteriosis, impair oral health, and is associated with the development of dental caries. However, the mechanism is unclear. The aim of this study was to explore the effects of Pb toxicity on oral antimicrobial activity in children in an e-waste area. Results showed higher blood Pb levels in e-waste-exposed group children, accompanied by decreased saliva SAG (salivary agglutinin) concentrations, increased peripheral WBC (white blood cell) counts and monocyte counts, and elevated peripheral monocyte percentage. LnPb (natural logarithmic transformation of blood Pb level) was negatively correlated with saliva SAG concentration, while positively correlated with peripheral monocyte percentage. Saliva SAG concentration played a complete mediating role in the correlation of LnPb to peripheral monocyte percentage. To our knowledge, this is the first study on the relationship of environmental Pb exposure and oral antimicrobial activity in children, showing that environmental Pb exposure may weaken oral antimicrobial activity through reducing saliva SAG concentration, which may raise the risk of oral dysbacteriosis and ultimately pathogen infection.

Contamination identification, source apportionment and health risk assessment of trace elements at different fractions of atmospheric particles at iron and steelmaking areas in China

China has the largest share of global iron and steel production, which is considered to play a significant contribution to air pollution. This study aims to investigate trace element contamination at different fractions of particulate matter (PM) at industrial areas in China. Three PM fractions, PM2.1-9.0, PM1.1-2.1 and PM1.1, were collected from areas surrounding iron and steelmaking plants at Kunming, Wuhan, Nanjing and Ningbo in China. Multiple trace elements and their bioavailability, as well as Pb isotopic compositions, were analysed for identification of contaminants, health risk assessment and source apportionment. Results showed that PM particles in the sites near industrial areas were associated with a range of toxic trace elements, specifically As, Cr(VI), Cd and Mn, and posed significant health risks to humans. The isotopic Pb compositions identified that coal and high temperature metallurgical processes in the steelmaking process were the dominant contributors to local air pollution in these sites. In addition to iron and steelmaking activities, traffic emissions and remote pollution also played a contributing role in PM contamination, confirmed by the differences of Pb isotopic compositions at each PM fraction and statistical results from Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) and Geometrical Analysis for Interactive Aid (GAIA). The results presented in this study provide a comprehensive understanding of PM emissions at iron and steelmaking areas, which helps to guide subsequent updates of air pollution control guidelines to efficiently minimise environmental footprint and ensure long term sustainability of the industries.

Impacts of Sources on PM2.5 Oxidation Potential during and after the Asia-Pacific Economic Cooperation Conference in Huairou, Beijing

To illustrate the major sources responsible for the redox activity of ambient fine particles during the 2014 Asia-Pacific Economic Cooperation (APEC) conference in Beijing, 3 months of daytime (8:00-19:30 LST) and nighttime (20:00-7:30 LST) particulate kmatter (PM_2.5) was collected in Huairou, Beijing from November 3, 2014 through January 31, 2015. PM_2.5 compositions were analyzed, including elements, organic carbon, elemental carbon, water-soluble ions, organics, and redox activities measured by both the dithiothreitol and the macrophage reactive oxygen species (ROS) assays. The mass-normalized redox activity was approximately constant during the noncontrol period (NCP) and control period (CP). The absolute value of the volume-normalized redox activity was about 4 times higher during NCP than that during CP, indicating the effectiveness of the control measures. The statistical analysis results showed that an interquartile range increase in PM_2.5 mass, chemicals, and sources (μg/m³) was associated with the 1-3% increase in redox activity, indicating that the successful control did make a significant reduction in redox activity but did not elucidate that some source controls (i.e., vehicle emissions) could be more effective at reducing redox activity than other control programs (i.e., dust source). This study demonstrated that combustion particles from both solid fuels and liquid fuels could contribute to ROS generation. Furthermore, ROS could be formed in the atmosphere via photochemical reactions, which highlights the need to further research on their formation pathways. A better understanding of the relevant mechanistic pathways and different source contributors to ROS will help to guide strategies for targeted mitigation of the atmospheric oxidation potential and will also help to reduce the great disease stress caused by exposure to air pollution.

The influence that different urban development models has on PM2.5 elemental and bioaccessible profiles

Limited studies have reported on in-vitro analysis of PM_2.5 but as far as the authors are aware, bioaccessibility of PM_2.5 in artificial lysosomal fluid (ALF) has not been linked to urban development models before. The Brazilian cities Manaus (Amazon) and Curitiba (South region) have different geographical locations, climates, and urban development strategies. Manaus drives its industrialization using the free trade zone policy and Curitiba adopted a services centered economy driven by sustainability. Therefore, these two cities were used to illustrate the influence that these different models have on PM_2.5in vitro profile. We compared PM_2.5 mass concentrations and the average total elemental and bioaccessible profiles for Cu, Cr, Mn, and Pb. The total average elemental concentrations followed Mn > Pb > Cu > Cr in Manaus and Pb > Mn > Cu > Cr in Curitiba. Mn had the lowest solubility while Cu showed the highest bioaccessibility (100%) and was significantly higher in Curitiba than Manaus. Cr and Pb had higher bioaccessibility in Manaus than Curitiba. Despite similar mass concentrations, the public health risk in Manaus was higher than in Curitiba indicating that the free trade zone had a profound effect on the emission levels and sources of airborne PM. These findings illustrate the importance of adopting sustainable air quality strategies in urban planning.

Inhalation bioaccessibility of Cd, Cu, Pb and Zn and speciation of Pb in particulate matter fractions from areas with different pollution characteristics in Henan Province, China

Windowsill particulate matter (PM) samples were collected from an area near large lead-smelting facilities in Jiyuan (JP), the urban area of Jiyuan (JU) and the peri-urban area of Mianchi (MC) in Henan, China to investigate the concentration and inhalation bioaccessibility of Cd, Cu, Pb and Zn. The <10 μm portions of the samples were extracted with simulated lung fluid to assess the in vitro inhalation bioaccessibility. Lower concentrations of heavy metals were found in the MC samples than in the JP and the JU samples. The average concentrations of Pb, Cd and Cu in the portions of the same size are in the order of JP samples > JU samples > MC samples. For Pb, Cd and Zn, the maximum inhalation bioaccessibility fraction values are all found in the MC samples, which ranged 3.87-8.79%, while those of the JP and the JU samples are <2%. The Pb speciation analysis with X-ray absorption spectrometry indicate mineral bound Pb, PbS and Pb₃(PO₄)₂ are the predominant Pb species in the JP samples; for the JU sample, organic bound Pb is the predominant Pb species in the 45-125 μm portion, while mineral bound Pb is the predominant Pb species in the 10-45 μm portion; for the MC samples, organic bound Pb is the predominant Pb species, followed by PbS. The results indicate that there is significant accumulation of Pb, Cd, Cu and Zn associated with PM in the area near the lead smelter and in the urban area of Jiyuan, especially Pb and Cd, however, the inhalation bioaccessibility of these metals in samples from the lead smelting impacted area is low, this may be due to the higher proportion of less soluble species of the metals in the samples from this area. However, organic matter bound Pb found in some samples has higher bioaccessibility than other Pb species.

Interventions to reduce ambient particulate matter air pollution and their effect on health

BACKGROUND

Ambient air pollution is associated with a large burden of disease in both high-income countries (HICs) and low- and middle-income countries (LMICs). To date, no systematic review has assessed the effectiveness of interventions aiming to reduce ambient air pollution.

OBJECTIVES

To assess the effectiveness of interventions to reduce ambient particulate matter air pollution in reducing pollutant concentrations and improving associated health outcomes.

SEARCH METHODS

We searched a range of electronic databases with diverse focuses, including health and biomedical research (CENTRAL, Cochrane Public Health Group Specialised Register, MEDLINE, Embase, PsycINFO), multidisciplinary research (Scopus, Science Citation Index), social sciences (Social Science Citation Index), urban planning and environment (Greenfile), and LMICs (Global Health Library regional indexes, WHOLIS). Additionally, we searched grey literature databases, multiple online trial registries, references of included studies and the contents of relevant journals in an attempt to identify unpublished and ongoing studies, and studies not identified by our search strategy. The final search date for all databases was 31 August 2016.

SELECTION CRITERIA

Eligible for inclusion were randomized and cluster randomized controlled trials, as well as several non-randomized study designs, including controlled interrupted time-series studies (cITS-EPOC), interrupted time-series studies adhering to EPOC standards (ITS-EPOC), interrupted time-series studies not adhering to EPOC standards (ITS), controlled before-after studies adhering to EPOC standards (CBA-EPOC), and controlled before-after studies not adhering to EPOC standards (CBA); these were classified as main studies. Additionally, we included uncontrolled before-after studies (UBA) as supporting studies. We included studies that evaluated interventions to reduce ambient air pollution from industrial, residential, vehicular and multiple sources, with respect to their effect on mortality, morbidity and several air pollutant concentrations. We did not restrict studies based on the population, setting or comparison.

DATA COLLECTION AND ANALYSIS

After a calibration exercise among the author team, two authors independently assessed studies for inclusion, extracted data and assessed risk of bias. We conducted data extraction, risk of bias assessment and evidence synthesis only for main studies; we mapped supporting studies with regard to the types of intervention and setting. To assess risk of bias, we used the Graphic Appraisal Tool for Epidemiological studies (GATE) for correlation studies, as modified and employed by the Centre for Public Health Excellence at the UK National Institute for Health and Care Excellence (NICE). For each intervention category, i.e. those targeting industrial, residential, vehicular and multiple sources, we synthesized evidence narratively, as well as graphically using harvest plots.

MAIN RESULTS

We included 42 main studies assessing 38 unique interventions. These were heterogeneous with respect to setting; interventions were implemented in countries across the world, but most (79%) were implemented in HICs, with the remaining scattered across LMICs. Most interventions (76%) were implemented in urban or community settings.We identified a heterogeneous mix of interventions, including those aiming to address industrial (n = 5), residential (n = 7), vehicular (n = 22), and multiple sources (n = 4). Some specific interventions, such as low emission zones and stove exchanges, were assessed by several studies, whereas others, such as a wood burning ban, were only assessed by a single study.Most studies assessing health and air quality outcomes used routine monitoring data. Studies assessing health outcomes mostly investigated effects in the general population, while few studies assessed specific subgroups such as infants, children and the elderly. No identified studies assessed unintended or adverse effects.The judgements regarding the risk of bias of studies were mixed. Regarding health outcomes, we appraised eight studies (47%) as having no substantial risk of bias concerns, five studies (29%) as having some risk of bias concerns, and four studies (24%) as having serious risk of bias concerns. Regarding air quality outcomes, we judged 11 studies (31%) as having no substantial risk of bias concerns, 16 studies (46%) as having some risk of bias concerns, and eight studies (23%) as having serious risk of bias concerns.The evidence base, comprising non-randomized studies only, was of low or very low certainty for all intervention categories and primary outcomes. The narrative and graphical synthesis showed that evidence for effectiveness was mixed across the four intervention categories. For interventions targeting industrial, residential and multiple sources, a similar pattern emerged for both health and air quality outcomes, with essentially all studies observing either no clear association in either direction or a significant association favouring the intervention. The evidence base for interventions targeting vehicular sources was more heterogeneous, as a small number of studies did observe a significant association favouring the control. Overall, however, the evidence suggests that the assessed interventions do not worsen air quality or health.

AUTHORS' CONCLUSIONS

Given the heterogeneity across interventions, outcomes, and methods, it was difficult to derive overall conclusions regarding the effectiveness of interventions in terms of improved air quality or health. Most included studies observed either no significant association in either direction or an association favouring the intervention, with little evidence that the assessed interventions might be harmful. The evidence base highlights the challenges related to establishing a causal relationship between specific air pollution interventions and outcomes. In light of these challenges, the results on effectiveness should be interpreted with caution; it is important to emphasize that lack of evidence of an association is not equivalent to evidence of no association.We identified limited evidence for several world regions, notably Africa, the Middle East, Eastern Europe, Central Asia and Southeast Asia; decision-makers should prioritize the development and implementation of interventions in these settings. In the future, as new policies are introduced, decision-makers should consider a built-in evaluation component, which could facilitate more systematic and comprehensive evaluations. These could assess effectiveness, but also aspects of feasibility, fidelity and acceptability.The production of higher quality and more uniform evidence would be helpful in informing decisions. Researchers should strive to sufficiently account for confounding, assess the impact of methodological decisions through the conduct and communication of sensitivity analyses, and improve the reporting of methods, and other aspects of the study, most importantly the description of the intervention and the context in which it is implemented.

A method for assessing carcinogenic risk of air fine particle-associated polycyclic aromatic hydrocarbons by considering bioaccessibility in lung fluids

This study was conducted to evaluate the inhalation carcinogenic risk of PAHs in biochar fine particles using total concentration-based assessment approach and bioaccessibility-based assessment approach. Only limit PAHs in particles can be released in simulated lung fluids, leading to a low bioaccessibility (only ranging from 0.34% to 1.48% for biochar fine particles and from 3.21% to 44.2% for PM2.5), which would significantly affect health risk assessment. Therefore, bioaccessibility should always be favored over more traditional evaluations based on total concentration, while evaluating inhalation health risks of biochar-bound PAHs. To prove the broad applicability of bioaccessibility-based assessment approaches, we also compared health risk of actual atmospheric particles (PM2.5 collected from Nanjing, China) using total concentration-based approaches and bioaccessibility-based approaches. •Proposed bioaccessibility-based approaches for assessing biochar risk are more accurate than traditional total concentration-based approaches;•Proposed bioaccessibility-based approaches can be applied to health risk assessment of actual air particles;•A more practical method was proposed to evaluate the bioaccessibility of PAHs in biochar fine particles or other specific component of atmospheric particle matters: using wet sieving method to prepare fine particles, using volatile organic solvent-drying method to load 14C-PAHs on fine particles, and using desorption experiments to determine bioaccessibility of PAHs.

Parabens and triclosan in shellfish from Shenzhen coastal waters: Bioindication of pollution and human health risks

This work aimed to determine the concentrations of parabens and triclosan (TCS) in shellfish from coastal waters of Shenzhen, South China. A method of isotope dilution with high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was used to determine TCS and five paraben analogues, including methyl paraben (MeP), ethyl paraben (EtP), propyl paraben (PrP), butyl paraben (BuP), and benzyl paraben (BeP), in 186 shellfish samples covering eight species. Concentrations of parabens and TCS were 0.13-25.5 ng/g wet weight (ww) and <LOQ-6.51 ng/g ww, respectively, indicating their ubiquitous contamination in Shenzhen coastal waters. MeP was the most predominant paraben, followed by EtP and PrP. These three analogues accounted for more than 95% of the total concentrations of parabens. The "high" estimated daily intakes of parabens and TCS with the 95th percentage concentrations were estimated to be 2.15-26.1 and 0.41-10.3 ng/kg bw/day, respectively, much lower than the acceptable dietary intakes of parabens (1 × 10⁷ ng/kg bw/day) and TCS (200 ng/kg bw/day), indicating no significant human health risks from shellfish consumption in the studied region. To our knowledge, this is the first report on the occurrences of parabens and TCS in shellfish products from Shenzhen coastal waters.

In vitro oral and inhalation bioaccessibility of hydrophobic organic contaminants (HOCs) in airborne particles and influence of relevant parameters

The bioaccessibility of environmental contaminants has been assessed widely using in vitro simulation; however, the physiological parameters used vary greatly. In this study, we assessed the influence of various physiological parameters and food material on the oral or inhalation bioaccessibility of PM_2.5-bound hydrophobic organic contaminants (HOCs), including halogenated flame retardants (HFRs), organophosphorus flame retardants (OPFRs), and polycyclic aromatic hydrocarbons (PAHs). The results showed that physiologically based pepsin and pancreatin have a small influence on the HOC liberation from particles. The bioaccessibility increased dramatically when the bile salt concentrations exceeding the critical micelle concentration, and application of porcine bile salts probably lead to underestimated bioaccessibility. Protein and carbohydrates significantly increased the bioaccessibility of most HOCs, while a significant bioaccessibility reduction was caused by green tea. The bioaccessibility of most HOCs was not promoted by liquor under normal physiological condition, but was significantly promoted under fast condition. Long residence time of PM_2.5 in the lung (15 days) would result in higher mobilization of PAHs into the lung fluid than short time (one day). However, the inverse time-dependence for OPFRs suggests degradation in the lung fluid. A mechanism of hydrolysis of organophosphorus ester is hypothesized, and the half lives ranged from 17 to 90 days.

Pulmonary bioaccessibility of trace metals in PM2.5 from different megacities simulated by lung fluid extraction and DGT method

Atmospheric fine particulate matters (PM_2.5) pose significant risks to human health through inhalation, especially in the rapidly developing China due to air pollution. The harmful effects of PM_2.5 are determined not only by its concentrations and hazardous components from diverse sources, but more by their bioavailable fractions actually absorbed by human body. To accurately estimate the inhalation risks of airborne metals, a physiologically based bioaccessibility method combining Simulated Lung Fluid (SLF) extraction and Diffusive Gradients in Thin-films (DGT) approaches was developed, representing the dissolution of particulate metals into lung fluid and the subsequent lung absorption of free metal cations in solution, respectively. The new method was used to compare the lung bioaccessibility of typical trace metals in PM_2.5 from three China megacities (Shanghai and Nanjing in the east, Guangzhou in south) during heavy pollution seasons. Generally, the SLF bioaccessibility (%) simulating the solubility of particulate metals in alveolar lung fluid was in order of Ni > Cd > Mn » Pb, while the succeeding DGT bioaccessibility representing labile metal fractions in solution phase absorbed directly by lung was lower and ranked as Ni ∼ Mn > Cd » Pb, thus Ni and Cd posed relatively higher potential risks owing to their high air pollution level and higher pulmonary bioaccessibility. Due to varied particle sources such as coal combustion and traffic emissions, some airborne metal concentrations (Pb, Ni) showed inconsistent spatial patterns with bulk PM_2.5 concentrations, and also varied bioaccessibility in different regions. The framework for PM_2.5 pollution risk assessments should be refined by considering both aerosol components and associated pollutants' bioaccessibility.

PM2.5 concentration and composition in the urban air of Nanjing, China: Effects of emission control measures applied during the 2014 Youth Olympic Games

Industrial processes, coal combustion, biomass burning (BB), and vehicular transport are important sources of atmospheric fine particles (PM_2.5) and contribute to ambient air concentrations of health-hazardous species, such as heavy metals, polycyclic aromatic hydrocarbons (PAH), and oxygenated-PAHs (OPAH). In China, emission controls have been implemented to improve air quality during large events, like the Youth Olympic Games (YOG) in August 2014 in Nanjing. In this work, six measurement campaigns between January 2014 and August 2015 were undertaken in Nanjing to determine the effects of emission controls and meteorological factors on PM_2.5 concentration and composition. PAHs, OPAHs, hopanes, n‑alkanes, heavy metals, and several other inorganic elements were measured. PM_2.5 and potassium concentrations were the highest in May-June 2014 indicating the prevalence of BB plumes in Nanjing. Emission controls substantially reduced concentrations of PM_2.5 (31%), total PAHs (59%), OPAHs (37%), and most heavy metals (44-89%) during the YOG compared to August 2015. In addition, regional atmospheric transport and meteorological parameters partly explained the observed differences between the campaigns. The most abundant PAHs and OPAHs were benzo[b,k]fluoranthenes, fluoranthene, pyrene, chrysene, 1,8‑naphthalic anhydride, and 9,10‑anthracenedione in all campaigns. Carbon preference index and the contribution of wax n‑alkanes indicated mainly biogenic sources of n‑alkanes in May-June 2014 and anthropogenic sources in the other campaigns. Hopane indexes pointed to vehicular transport as the major source of hopanes, but contribution of coal combustion was detected in winter 2015. The results provide evidence to the local government of the impacts of the air protection regulations. However, differences between individual components were observed, e.g., concentrations of potentially more harmful OPAHs decreased less than concentrations of PAHs. The results suggest that the proportions of hazardous components in the PM_2.5 may also change considerably due to emission control measures.

Inhalation bioaccessibility of PAHs in PM2.5: Implications for risk assessment and toxicity prediction

In this study, 46 PM_2.5 samples collected from Nanjing, China were analyzed for total PAH concentration, with 14 samples assessed for PAH inhalation bioaccessibility and dioxin toxicity. The concentration of 19 PAH compounds in PM_2.5 ranged from 4.03 to 102 ng m^-3. When PAH inhalation bioaccessibility was assessed using simulated epithelial lung fluid, mean bioaccessibility values ranged from 3.21% (Benzo(c)fluorene) to 44.2% (Acenaphthylene). Benzo(a)pyrene concentration in 50% of the PM_2.5 samples exceeded the Chinese air quality standard of 2.5 ng m^-3, however, when bioaccessibility was considered, all samples were below the criterion. Similarly, the cancer risk probability for all PM_2.5 samples was >10^-4 incidences on the basis of total PAH concentration, while only 37% of samples posed a risk >10^-4 after incorporation of bioaccessibility. Dioxin toxicity of PM_2.5-bound PAHs was also investigated by characterizing mRNA expression of cytochrome P450 superfamily members in human lung cells (A549 cell). Compared to total PAH concentration, the use of bioaccessible concentration was better at predicting dioxin toxicity of PM_2.5-associated PAHs (correlation coefficient R² = 0.40-0.83 with p < 0.05). This study indicates that PAH inhalation bioaccessibility is an important consideration when assessing and predicting the risk posed by PM_2.5 particles, which is particularly important for countries with deteriorating air quality.

In vitro inhalation bioaccessibility for particle-bound hydrophobic organic chemicals: Method development, effects of particle size and hydrophobicity, and risk assessment

Bioaccessibility of particle-bound hydrophobic organic contaminants and related particle size effects are significant for assessing the potential human health risk via inhalation exposure, but have not been clearly evaluated. To fill this knowledge gap, the present study developed an in vitro method to estimate the inhalation bioaccessibility of particulate polycyclic aromatic hydrocarbons (PAHs) using simulated human lung fluids, i.e., a modified Gamble's solution (MGS) and artificial lysosomal fluid (ALF) with Tenax as the absorption media. Assay parameters, namely incubation time (10 d) and influence of filter use, were optimized for establishing the in vitro method. The results showed that the bioaccessibility of PAHs increased with increasing particle size, but other factors, such as total organic carbon and chemical hydrophobicity, also played a large role in the fate of these compounds. The results from this portion of the present study were then used to evaluate human health risk, which showed that the risk of these particle-bound PAHs by incorporating size-dependent PAHs bioaccessibility and deposition efficiency in the human respiratory tract into inhalation exposure risk calculations was reduced by >90% when compared to using total concentration. This suggested that the inhalation bioaccessibility and deposition efficiency of hydrophobic organic chemicals should be included in human health risk assessment.

Novel in vitro method for measuring the mass fraction of bioaccessible atmospheric polycyclic aromatic hydrocarbons using simulated human lung fluids

The bioaccessibility of organic pollutants is a key factor in human health risk assessments. We developed a novel in vitro method for determining the mass fraction of bioaccessible atmospheric polycyclic aromatic hydrocarbons (PAHs) using an air-washing device containing simulated human lung fluid. The experimental parameters were optimized based on the deposition fractions (DFs) of PAHs in human lung fluids. The DFs were measured for PAHs based on the mass of compounds in the mainstream and exhaled cigarette smoke. The mass fractions of bioaccessible PAHs were measured by passing the mainstream cigarette smoke through the air-washing device, and they were calculated via a simple mass balance equation based on the PAHs in the fluid and mainstream cigarette smoke. The DFs of individual PAHs ranged from 20.5% to 78.1%, and the bioaccessible mass fractions varied between 45.5% and 99.8%. The octanol-water partition coefficients (KOW) significantly influenced both the DFs and bioaccessible mass fractions of PAHs, and the optimized in vitro method could be used to estimate the bioavailable atmospheric PAHs. This in vitro method can potentially be used to measure the mass fraction of bioaccessible atmospheric PAHs and to assess the health risk related to human exposure to airborne PAHs.

Methodological factors influencing inhalation bioaccessibility of metal(loid)s in PM2.5 using simulated lung fluid

In this study, methodological factors influencing the dissolution of metal(loid)s in simulated lung fluid (SLF) was assessed in order to develop a standardised method for the assessment of inhalation bioaccessibility in PM_2.5. To achieve this aim, the effects of solid to liquid (S/L) ratio (1:100 to 1:5000), agitation (magnetic agitation, occasional shaking, orbital and end-over-end rotation), composition of SLF (artificial lysosomal fluid: ALF; phagolysosomal simulant fluid: PSF) and extraction time (1-120 h) on metal(loid) bioaccessibility were investigated using PM_2.5 from three Australian mining/smelting impacted soils and a certified reference material. The results highlighted that SLF composition significantly (p < 0.001) influenced metal(loid) bioaccessibility and that when a S/L ratio of 1:5000 and end-over-end rotation was used, metal(loid) solubility plateaued after approximately 24 h. Additionally, in order to assess the exposure of metal(loid)s via incidental ingestion of surface dust, PM_2.5 was subjected to simulated gastro-intestinal tract (GIT) solutions and the results were compared to extraction using SLF. Although As bioaccessibility in SLF (24 h) was significantly lower than in simulated GIT solutions (p < 0.05), Pb bioaccessibility was equal to or significantly higher than that extracted using simulated GIT solutions (p < 0.05).

Impact of particle size on distribution, bioaccessibility, and cytotoxicity of polycyclic aromatic hydrocarbons in indoor dust

Contaminants, such as polycyclic aromatic hydrocarbons (PAHs), can be absorbed on the particles of indoor dust, which may pose potential health risks. In this study, indoor dust samples were collected and sieved into 6 size fractions (i.e., <43 μm, 43-63 μm, 63-100 μm, 100-150 μm, 150-200 μm, and 200-2000 μm). Ingestion bioaccessibility of PAHs was measured by physiologically based extraction test. Bioaccessibility in fractions of 200-2000 μm was generally higher than those in other particle sizes. Daily uptake doses based on benzo(a)pyrene toxic equivalency quantity were 1.09-15.0 ng/d/kg, and peaked at fractions of <43 μm, while doses considering bioaccessibility ranged from 0.02 to 0.21 ng/d/kg, and peaked at fractions with relatively larger particle size. Cell toxicity was also investigated by human normal liver cell line viability through exposure to organic extracts of indoor dust fractions with various particle sizes. Our results indicated that it is crucial to consider dust particle size and bioaccessibility during risk assessment.

An inhalation-ingestion bioaccessibility assay (IIBA) for the assessment of exposure to metal(loid)s in PM10

Although metal(loid) bioaccessibility of ambient particulate matter, with an aerodynamic diameter of <10μm (PM₁₀), has recently received increasing attention, limited research exists into standardising in-vitro methodologies using simulated lung fluid (SLF). Contradictions exist regarding which assay parameters should be adopted. Additionally, potential continuation of metal(loid) dissolution once PM₁₀ is cleared from the lungs and passed through the gastro-intestinal tract (GIT) has rarely been addressed. The objective of this study was to assess parameters that influence inhalation bioaccessibility in order to develop a conservative assay that is relevant to a human inhalation scenario. To achieve this aim, the effect of solid to liquid (S/L) ratio, extraction time, agitation and five major SLF compositions on the bioaccessibilities of arsenic (As) and lead (Pb) was investigated using PM₁₀ from three Australian mining/smelting impacted regions. Using the biologically relevant parameters that resulted in the most conservative outcomes, bioaccessibility of metal(loid)s in PM₁₀ was assessed in SLF, followed by simulated GIT solutions. Results from this study revealed that fluid composition and S/L ratio significantly affected metal(loid) dissolution (p<0.05). The highest Pb bioaccessibility resulted using simulated lung-gastric solution, while that of As resulted using simulated lung-gastric-small intestinal tract solutions. Compared to SLF alone, metal(loid) dissolution using the inhalation-ingestion bioaccessibility assay (IIBA) was significantly higher (p<0.05) for all PM₁₀ samples.

Speciation, bioaccessibility and potential risk of chromium in Amazon forest soils

Even though the Amazon region is widely studied, there is still a gap regarding Cr exposure and its risk to human health. The objectives of this study were to 1) determine Cr concentrations in seven chemical fractions and 6 particle sizes in Amazon soils, 2) quantify hexavalent Cr (CrVI) concentrations using an alkaline extraction, 3) determine the oral and lung bioaccessible Cr, and 4) assess Cr exposure risks based on total and bioaccessible Cr in soils. The total Cr in both A (0-20 cm) and B (80-100 cm) horizons was high at 2346 and 1864 mg kg^-1. However, sequential extraction indicated that available Cr fraction was low compared to total Cr, with Cr in the residual fraction being the highest (74-76%). There was little difference in total Cr concentrations among particle sizes. Hexavalent Cr concentration was also low, averaging 0.72 and 2.05 mg kg^-1 in A and B horizon. In addition, both gastrointestinal (21-22 mg kg^-1) and lung (0.95-1.25 mg kg^-1) bioaccessible Cr were low (<1.2%). The low bioavailability of soil Cr and its uniform distribution in different particle sizes indicated that Cr was probably of geogenic origin. Exposure based on total Cr resulted in daily intake > the oral reference dose for children, but not when using CrVI or bioaccessible Cr. The data indicated that it is important to consider both Cr speciation and bioaccessibility when evaluating risk from Cr in Amazon soils.

Phthalates in PM2.5 from Shenzhen, China and human exposure assessment factored their bioaccessibility in lung

Temporal variability of phthalates (PAEs) in PM_2.5 from Shenzhen during 2015-2016 was measured and the associated human exposure via inhalation was assessed. The PM_2.5 concentrations ranged from 30.7 to 115 μg m^-3, greater than the air quality guidelines of interim target-3 (10-15 μg m^-3) and interim target-2 (15-25 μg m^-3) set by World Health Organization. PAEs were detected in 94.7% samples and the 95th percentile concentrations of total PAEs (∑₆PAEs) in Longgang and Nanshan districts were 324 and 44.7 ng m^-3, respectively. Di-2-ethylhexyl phthalate was the dominant species, accounting for an average of 81.9% of ∑₆PAEs. The mean and 95th percentile concentrations of ∑₆PAEs in PM_2.5 were used to calculate a "typical" and "high" total daily intake and uptake, respectively. The estimated total daily intakes of PAEs varied and depended on body weight in each age group. Infants had the highest "typical" and "high" daily intake of 43.4 and 179 ng kg-body weight (bw) ^-1 day^-1 for boys, and 42.0 and 173 ng kg-bw^-1 day^-1 for girls, respectively. However, after taking the bioaccessibility of PAEs in PM_2.5 into account, the total daily "typical" and "high" uptakes dropped to 27.3 and 113 ng kg-bw^-1 day^-1 for male infants, and 29.0 and 120 ng kg-bw^-1 day^-1 for female infants, respectively. Both of the data on the daily "high" intake and uptake were much lower than the tolerable daily intake set by the European Food Safety Agency. It merits attention that infants were subject to greater PAE exposure than adults.

In vitro bioaccessibility and health risk assessment of heavy metals in atmospheric particulate matters from three different functional areas of Shanghai, China

The bioaccessibility and human health risks of heavy metals in PM_2.5 and PM₁₀ samples from three functional areas of Shanghai, China including a commercial area (CA), a residential area (RA), and an industrial area (IA), were investigated. Gamble's solution and physiologically based extraction test were employed to simulate human respiratory and digestive system, respectively. Both PM_2.5 and PM₁₀ concentration in the three areas exceeded the guideline of WHO, and followed the order of IA>CA≈RA. Zinc and Pb were the most abundant metals with a concentration range of 0.19-0.44 and 0.05-0.42μgm^-3, respectively. In respiratory system, heavy metal bioaccessibility for PM_2.5 and PM₁₀ varied within the range of 5.3%-71.4% and 4.8%-51.5%, respectively. Heavy metals in RA showed higher bioaccessibility than those in CA and IA in the respiratory system. In digestive system, heavy metal bioaccessibility for PM_2.5 and PM₁₀ reached 24.6%-90.9% and 28.5%-88.9% in the gastric phase and was reduced to 8.7%-85.5% and 8.5%-81.8% in the intestinal phase, respectively. The bioaccessibility of heavy metals in CA was highest among three areas in the digestive system. Based on the bioaccessibility analysis, the hazard quotient values of heavy metals in PMs via inhalation exposure were far below 1, the safe level, for both adults and children. However, potential risks via ingestion exposure resulted from Pb existed for children of three areas and for adults of RA as their hazard quotient values could reach up to 11. The obtained results indicated that the air quality in Shanghai need to be improved and the health risks to humans via ingestion exposure to atmospheric Pb must be considered.

High reduction of ozone and particulate matter during the 2016 G-20 summit in Hangzhou by forced emission controls of industry and traffic

Many regions in China experience air pollution episodes because of the rapid urbanization and industrialization over the past decades. Here we analyzed the effect of emission controls implemented during the G-20 2016 Hangzhou summit on air quality. Emission controls included a forced closure of highly polluting industries, and limiting traffic and construction emissions in the cities and surroundings. Particles with aerodynamic diameter lower than 2.5 µm (PM_2.5) and ozone (O₃) were measured. We also simulated air quality using a forecast system consisting of the two-way coupled Weather Research and Forecast and Community Multi-scale Air Quality (WRF-CMAQ) model. Results show PM_2.5 and ozone levels in Hangzhou during the G-20 Summit were considerably lower than previous to the G-20 Summit. The predicted concentrations of ozone were reduced by 25.4%, whereas the predicted concentrations of PM_2.5 were reduced by 56%.

Trace metals and magnetic particles in PM2.5: Magnetic identification and its implications

Magnetic measurement was combined with geochemical analysis to investigate the trace metal pollution of PM_2.5. The study was carried out in Nanjing, China, where the average PM_2.5 concentrations in summer and winter in 2013–2014 were 66.37 and 96.92 μg/m³, respectively. The dominant magnetic mineral in PM_2.5 had a low-coercivity pseudo-single domain and consisted of magnetite and hematite. Iron-oxide magnetic particles comprised spherical as well as angular particles. Stable Pb isotopic ratio determinations showed that Pb in summer samples derived from coal emissions while the main sources of winter samples were smelting industry and coal emissions. The magnetic properties of the particles correlated strongly with trace metals derived from anthropogenic activities, such as industrial emission, coal combustion, and traffic vehicle activities, but poorly with those derived from natural sources. In the multiple linear regression analysis, Cr and Fe had higher correlation coefficients (training R > 0.7) in contrast to the low training R of As, Cd, Ni, Sr, and Ti (<0.5) determined using the PM_2.5 concentrations and magnetic parameter values as the decision variables. Our results support the use of environmental magnetism determinations as a simple and fast method to assess trace metals in urban particulate matter.

Refining health risk assessment by incorporating site-specific background concentration and bioaccessibility data of Nickel in soil

Risk assessment of Nickel (Ni) in a brownfield site contaminated was refined by incorporating the site-specific background level (SSBL) derived using multiple lines of evidence technology and bioaccessibility measured by the Unified Bioaccessibility Method (UBM) and Inhalation Bioaccessibility Method (IBM). The results revealed that the SSBL was 80mg/kg, which was much higher than the general soil screening value (GSSL) (50mg/kg) and more than two times regional background level reported for Tianjing (33mg/kg). The average bioaccessibility for the gastric and intestinal phases was 24.2% (8.6%-54.4%) and 12.6% (7.7%-17.1%), respectively. In simulated lung fluid, only 2.1% (1.0%-4.6%) of Ni in the soil particle was bioaccessible. The amount of samples exceeding the acceptable level was reduced by 50% when SSBL, other than GSSL, was used as the screening value. Moreover, the site-specific target level (SSTL) under acceptable risk level was increased from 94mg/kg to 283mg/kg when bioaccessibility was considered, and the amount of samples above SSTL was reduced to 10%. The study indicated that incorporating site-specific background levels and bioaccessibility data of contaminants in a given site has the potential to support health risk assessment decisions and can reduce the remediation cost greatly.

Use of simulated epithelial lung fluid in assessing the human health risk of Pb in urban street dust

In many urban contexts, non-dietary Pb exposure from street dusts may add to the overall exposure burden, and the presence of high total Pb content is well documented in urban street dust from across the globe. Given the increasing recognition of the potential adverse health effects from both the quantity and the chemical and physical composition of the inhaled fraction, and the recognition that it is the soluble fraction rather than the total element content that has more direct links to health effects, attention has focused in this study on the human health risks via this exposure pathway. In order to investigate the environmental exposure to Pb from the inhalation of urban street dusts, a newly developed in vitro simulated epithelium lung fluid (SELF) has been applied to the <10μm fraction of urban street dusts. In this context, 21 urban street dust samples, across five UK cities, were selected based on their high pseudo-total Pb content. The work revealed that inhalation bioaccessibility, and hence inhalation dose, varied across the cities but was generally found to be low (<10%). Indeed, the lung bioaccessibility was far lower (% lung bioaccessibility ranged from 1.2 to 8.8) than is currently applied in two of the most commonly employed risk assessment models i.e. the Integrated Exposure Uptake Biokinetic model (IEUBK, USA) and the Contaminated Land Exposure Assessment model (CLEA, UK). The estimated inhalation dose (for adults) calculated from the PM10 bioaccessibility ranged from 7ngkg^-1_BWday^-1 (Edinburgh) to 1.3ngkg^-1_BWday^-1 (Liverpool). The results indicate a low potential inhalation bioaccessibility for Pb in these urban street dust samples when modelled using the neutral pH conditions of the SELF.

A critical review of approaches and limitations of inhalation bioavailability and bioaccessibility of metal(loid)s from ambient particulate matter or dust

Inhalation of metal(loid)s in ambient particulate matter (APM) represents a significant exposure pathway to humans. Although exposure assessment associated with this pathway is currently based on total metal(loid) content, a bioavailability (i.e. absorption in the systemic circulation) and/or bioaccessibility (i.e. solubility in simulated lung fluid) based approach may more accurately quantify exposure. Metal(loid) bioavailability-bioaccessibility assessment from APM is inherently complex and lacks consensus. This paper reviews the discrepancies that impede the adoption of a universal protocol for the assessment of inhalation bioaccessibility. Exposure assessment approaches for in-vivo bioavailability, in-vitro cell culture and in-vitro bioaccessibility (composition of simulated lungs fluid, physico-chemical and methodological considerations) are critiqued in the context of inhalation exposure refinement. An important limitation of bioavailability and bioaccessibility studies is the use of considerably higher than environmental metal(loid) concentration, which diminishing their relevance to human exposure scenarios. Similarly, individual metal(loid) studies have been criticised due to complexities of APM metal(loid) mixtures which may impart synergistic or antagonistic effects compared to single metal(loid) exposure. Although a number of different simulated lung fluid (SLF) compositions have been used in metal(loid) bioaccessibility studies, information regarding the comparative leaching efficiency among these different SLF and comparisons to in-vivo bioavailability data is lacking. In addition, the particle size utilised is often not representative of what is deposited in the lungs while assay parameters (extraction time, solid to liquid ratio, temperature and agitation) are often not biologically relevant. Research needs are identified in order to develop robust in-vitro bioaccessibility protocols for the assessment or prediction of metal(loid) bioavailability in APM for the refinement of inhalation exposure.

Associations of blood lead levels with reproductive hormone levels in men and postmenopausal women: Results from the SPECT-China Study

We examined whether blood lead levels (BLLs) were associated with reproductive hormone levels in a cross-sectional study using data from the SPECT-China study. We selected 2286 men and 1571 postmenopausal women without hormone replacement therapy. BLLs, blood cadmium, total testosterone (TT), oestradiol (E2), luteinizing hormone (LH), follicle stimulating hormone (FSH) and sex hormone binding globulin(SHBG) levels were measured. The results showed that median values (interquartile range) of BLLs were 44.00 μg/L (29.00–62.30) for men and 41.00 μg/L (27.00–59.81) for postmenopausal women. In linear regression, after adjusting for age, current smoking status, body mass index, systolic blood pressure, diabetes and blood cadmium level, TT (P for trend = 0.001) and SHBG (P for trend < 0.001) levels were still positively associated with BLLs in men. Meanwhile, significant positive associations were found for BLLs with SHBG (P for trend = 0.002), FSH (P for trend = 0.001) and LH (P for trend = 0.026) levels in postmenopausal women. Additionally, the association between BLL and SHBG was modified by dysglycaemia (P for interaction = 0.03) in postmenopausal women. In conclusion, BLLs were associated with reproductive hormone levels in the general population of Chinese men and postmenopausal women, which may have important implications for human health. Concerted efforts to reduce adult lead exposure are warranted.