Occurrence, formation, environmental fate and risks of environmentally persistent free radicals in biochars

Review on biochar as a sustainable green resource for the rehabilitation of petroleum hydrocarbon-contaminated soil

Petroleum pollution is one of the primary threats to the environment and public health. Therefore, it is essential to create new strategies and enhance current ones. The process of biological reclamation, which utilizes a biological agent to eliminate harmful substances from polluted soil, has drawn much interest. Biochars are inexpensive, environmentally beneficial carbon compounds extensively employed to remove petroleum hydrocarbons from the environment. Biochar has demonstrated an excellent capability to remediate soil pollutants because of its abundant supply of the required raw materials, sustainability, affordability, high efficacy, substantial specific surface area, and desired physical-chemical surface characteristics. This paper reviews biochar's methods, effectiveness, and possible toxic effects on the natural environment, amended biochar, and their integration with other remediating materials towards sustainable remediation of petroleum-polluted soil environments. Efforts are being undertaken to enhance the effectiveness of biochar in the hydrocarbon-based rehabilitation approach by altering its characteristics. Additionally, the adsorption, biodegradability, chemical breakdown, and regenerative facets of biochar amendment and combined usage culminated in augmenting the remedial effectiveness. Lastly, several shortcomings of the prevailing methods and prospective directions were provided to overcome the constraints in tailored biochar studies for long-term performance stability and ecological sustainability towards restoring petroleum hydrocarbon adultered soil environments.

Residential Wood Burning and Vehicle Emissions as Major Sources of Environmentally Persistent Free Radicals in Fairbanks, Alaska

Environmentally persistent free radicals (EPFRs) play an important role in aerosol effects on air quality and public health, but their atmospheric abundance and sources are poorly understood. We measured EPFRs contained in PM2.5 collected in Fairbanks, Alaska, in winter 2022. We find that EPFR concentrations were enhanced during surface-based inversion and correlate strongly with incomplete combustion markers, including carbon monoxide and elemental carbon (R2 > 0.75). EPFRs exhibit moderately good correlations with PAHs, biomass burning organic aerosols, and potassium (R2 > 0.4). We also observe strong correlations of EPFRs with hydrocarbon-like organic aerosols, Fe and Ti (R2 > 0.6), and single-particle mass spectrometry measurements reveal internal mixing of PAHs, with potassium and iron. These results suggest that residential wood burning and vehicle tailpipes are major sources of EPFRs and nontailpipe emissions, such as brake wear and road dust, may contribute to the stabilization of EPFRs. Exposure to the observed EPFR concentrations (18 ± 12 pmol m-3) would be equivalent to smoking ∼0.4-1 cigarette daily. Very strong correlations (R2 > 0.8) of EPFR with hydroxyl radical formation in surrogate lung fluid indicate that exposure to EPFRs may induce oxidative stress in the human respiratory tract.

A comprehensive review of the "black gold catalysts" in wastewater treatment: Properties, applications and bibliometric analysis

A significant amount of effort has been devoted to the utilization of biochar-based catalysts in the treatment of wastewater. By virtue of its abundant functional groups and high specific surface area, biochar holds significant promise as a catalyst. This article presents a comprehensive systematic review and bibliometric analysis covering the period from 2009 to 2024, focusing on the restoration of wastewater through biochar catalysis. The production, activation, and functionalization techniques employed for biochar are thoroughly examined. In addition, the application of advanced technologies such as advanced oxidation processes (AOPs), catalytic reduction reactions, and biochemically driven processes based on biochar are discussed, with a focus on elucidating the underlying mechanisms and how surface functionalities influence the catalytic performance of biochar. Furthermore, the potential drawbacks of utilizing biochar are also brought to light. To emphasize the progress being made in this research field and provide valuable insights for future researchers, a scientometric analysis was conducted using CiteSpace and VOSviewer software on 595 articles. Hopefully, this review will enhance understanding of the catalytic performance and mechanisms pertaining to biochar-based catalysts in pollutant treatment while providing a perspective and guidelines for future research and development efforts in this area.

Environmentally persistent free radicals and other paramagnetic species in wildland-urban interface fire ashes

Wildland-urban interface (WUI) fires consume fuels, such as vegetation and structural materials, leaving behind ash composed primarily of pyrogenic carbon and metal oxides. However, there is currently limited understanding of the role of WUI fire ash from different sources as a source of paramagnetic species such as environmentally persistent free radicals (EPFRs) and transition metals in the environment. Electron paramagnetic resonance (EPR) was used to detect and quantify paramagnetic species, including organic persistent free radicals and transition metal spins, in fifty-three fire ash and soil samples collected following the North Complex Fire and the Sonoma-Lake-Napa Unit (LNU) Lightning Complex Fire, California, 2020. High concentrations of organic EPFRs (e.g., 1.4 × 1014 to 1.9 × 1017 spins g-1) were detected in the studied WUI fire ash along with other paramagnetic species such as iron and manganese oxides, as well as Fe3+ and Mn2+ ions. The mean concentrations of EPFRs in various ash types decreased following the order: vegetation ash (1.1 × 1017 ± 1.1 × 1017 spins g-1) > structural ash (1.6 × 1016 ± 3.7 × 1016 spins g-1) > vehicle ash (6.4 × 1015 ± 8.6 × 1015 spins g-1) > soil (3.2 × 1015 ± 3.7 × 1015 spins g-1). The mean concentrations of EPFRs decreased with increased combustion completeness indicated by ash color; black (1.1 × 1017 ± 1.1 × 1017 spins g-1) > white (2.5 × 1016 ± 4.4 × 1016 spins g-1) > gray (1.8 × 1016 ± 2.4 × 1016 spins g-1). In contrast, the relative amounts of reduced Mn2+ ions increased with increased combustion completeness. Thus, WUI fire ash is an important global source of EPFRs and reduced metal species (e.g., Mn2+). Further research is needed to underpin the formation, transformation, and environmental and human health impacts of these paramagnetic species in light of the projected increased frequency, size, and severity of WUI fires.

Revisiting the role of phospholipases in alzheimer's: crosstalk with processed food

Phospholipases such as phospholipase-A, phospholipase-B, phospholipase-C and phospholipase-D are important functional enzymes of the cell membrane responsible for a variety of functions such as signal transduction, production of lipid mediators, metabolite digestion and playing a pathological role in central nervous system diseases. Phospholipases have shown an association with Alzheimer's disease and these enzymes have found a correlation with several metabolic pathways that can lead to the activation of inflammatory signals via astrocytes and microglial cells. We also highlighted unhealthy practices like smoking and consuming processed foods, rich in nitroso compounds and phosphatidic acid, which contribute to neuronal damage in AD through phospholipases. A few therapeutic approaches such as the use of inhibitors of phospholipase-D,phospholipase A2 as well as autophagy-mediated inhibition have been discussed to control the onset of AD. This paper serves as a crosstalk between phospholipases and their role in neurodegenerative pathways as well as their influence on other biomolecules of lipid membranes, which are acquired through unhealthy diets and possible methods to treat these anomalies occurring due to their metabolic disorder involving phospholipases acting as major signaling molecules.

A systematic review of biochar aging and the potential eco-environmental risk in heavy metal contaminated soil

Biochar is widely accepted as a green and effective amendment for remediating heavy metals (HMs) contaminated soil, but its long-term efficiency and safety changes with biochar aging in fields. Currently, some reviews have qualitatively summarized biochar aging methods and mechanisms, aging-induced changes in biochar properties, and often ignored the potential eco-environmental risk during biochar aging process. Therefore, this review systematically summarizes the study methods of biochar aging, quantitatively compares the effects of different biochar aging process on its properties, and discusses the potential eco-environmental risk due to biochar aging in HMs contaminated soil. At present, various artificial aging methods (physical aging, chemical aging and biological aging) rather than natural field aging have been applied to study the changes of biochar's properties. Generally, biochar aging increases specific surface area (SSA), pore volume (PV), surface oxygen-containing functional group (OFGs) and O content, while decreases pH, ash, H, C and N content. Chemical aging method has a greater effect on the properties of biochar than other aging methods. In addition, biochar aging may lead to HMs remobilization and produce new types of pollutants, such as polycyclic aromatic hydrocarbons (PAHs), environmentally persistent free radicals (EPFRs) and colloidal/nano biochar particles, which consequently bring secondary eco-environmental risk. Finally, future research directions are suggested to establish a more accurate assessment method and model on biochar aging behavior and evaluate the environmental safety of aged biochar, in order to promote its wider application for remediating HMs contaminated soil.

Reactive Oxygen Species (ROS)-Mediated Antibacterial Oxidative Therapies: Available Methods to Generate ROS and a Novel Option Proposal

The increasing emergence of multidrug-resistant (MDR) pathogens causes difficult-to-treat infections with long-term hospitalizations and a high incidence of death, thus representing a global public health problem. To manage MDR bacteria bugs, new antimicrobial strategies are necessary, and their introduction in practice is a daily challenge for scientists in the field. An extensively studied approach to treating MDR infections consists of inducing high levels of reactive oxygen species (ROS) by several methods. Although further clinical investigations are mandatory on the possible toxic effects of ROS on mammalian cells, clinical evaluations are extremely promising, and their topical use to treat infected wounds and ulcers, also in presence of biofilm, is already clinically approved. Biochar (BC) is a carbonaceous material obtained by pyrolysis of different vegetable and animal biomass feedstocks at 200-1000 °C in the limited presence of O2. Recently, it has been demonstrated that BC's capability of removing organic and inorganic xenobiotics is mainly due to the presence of persistent free radicals (PFRs), which can activate oxygen, H2O2, or persulfate in the presence or absence of transition metals by electron transfer, thus generating ROS, which in turn degrade pollutants by advanced oxidation processes (AOPs). In this context, the antibacterial effects of BC-containing PFRs have been demonstrated by some authors against Escherichia coli and Staphylococcus aureus, thus giving birth to our idea of the possible use of BC-derived PFRs as a novel method capable of inducing ROS generation for antimicrobial oxidative therapy. Here, the general aspects concerning ROS physiological and pathological production and regulation and the mechanism by which they could exert antimicrobial effects have been reviewed. The methods currently adopted to induce ROS production for antimicrobial oxidative therapy have been discussed. Finally, for the first time, BC-related PFRs have been proposed as a new source of ROS for antimicrobial therapy via AOPs.

A state-of-art review on the redox activity of persistent free radicals in biochar

Biochar-bound persistent free radicals (biochar-PFRs) attract much attention because they can directly or indirectly mediate the transformation of contaminants in large-scale wastewater treatment processes. Despite this, a comprehensive top-down understanding of the redox activity of biochar-PFRs, particularly consumption and regeneration mechanisms, as well as challenges in redox activity assessment, is still lacking. To tackle this challenge, this review outlines the identification and determination methods of biochar-PFRs, which serve as a prerequisite for assessing the redox activity of biochar-PFRs. Recent developments concerning biochar-PFRs are discussed, with a main emphasis on the reaction mechanisms (both non-free radical and free radical pathways) and their effectiveness in removing contaminants. Importantly, the review delves into the mechanism of biochar-PFRs regeneration, triggered by metal cations, reactive oxygen species, and ultraviolet radiations. Furthermore, this review thoroughly explores the dilemma in appraising the redox activity of biochar-PFRs. Components with unpaired electrons (particular defects and metal ions) interfere with biochar-PFRs signals in electron paramagnetic resonance spectra. Scavengers and extractants of biochar-PFRs also inevitably modify the active ingredients of biochar. Based on these analyses, a practical strategy is proposed to precisely determine the redox activity of biochar-PFRs. Finally, the review concludes by presenting current gaps in knowledge and offering suggestions for future research. This comprehensive examination aims to provide new and significant insights into the redox activity of biochar-PFRs.

Influence of microplastics and environmentally persistent free radicals on the ability of biochar components to promote degradation of antibiotics by activated peroxymonosulfate

Microplastics (MPs) in sludge can affect the ability of biochar-activated peroxymonosulfate (PMS) to degrade antibiotics. In this work, biochar was prepared by mixing sludge and polystyrene (PS) through hydrothermal carbonization (HTC) and high-temperature pyrolysis processes. The resulting biochar was used to activate PMS to degrade ofloxacin (OFX), levofloxacin (LEV), and pefloxacin (PFX). The addition of PS significantly enhanced the ability of biochar/PMS to degrade antibiotics and the levels of environmentally persistent free radicals (EPFRs, 4.59 × 1020 spin/g) due to the decomposition of PS. The addition of PS resulted in a slight decrease in the specific surface area of biochar (2-3 m2/g on average), but a significant increase in the concentration of EPFRs increased the removal efficiency. The activation of PMS by biochar is dominated by free radicals, accounting for about 70%, in which SO4•- and •OH contribute the most and O2•- the least. However, 1O2 contributes 15-20% to the degradation of antibiotics in non-free radical processes. Overall, the process of biochar/PMS degradation of antibiotics is mainly dominated by free radicals, and the effect of non-free radicals is not obvious. Both hydrochar and pyrocarbon samples showed good hydrophilicity, and this property should improve the ability of active sites on biochar to degrade antibiotics. In the HTC process, PS can decompose during hydrochar preparation, with a maximum reduction value of 40.09%. The three-dimension excitation emission matrix fluorescence spectroscopy (3D-EEM) and total organic carbon (TOC) results show that the protein content in sludge plays a major role in reducing PS, with little effect of polysaccharide and SiO2. There are six to seven degradation intermediates of quinolone antibiotics, which are eventually degraded into CO2, H2O, and inorganic substances. The regeneration experiment showed good reusability of hydrochar and pyrocarbon, further demonstrating the suitability of biochar for the degradation of antibiotics.

Formation mechanism of persistent free radicals during pyrolysis of Fenton-conditioned sewage sludge: Influence of NOM and iron

The present study provided an innovative insight into the formation mechanism of persistent free radicals (PFRs) during the pyrolysis of Fenton-conditioned sludge. Fenton conditioners simultaneously improve the dewatering performance of sewage sludge and catalyze the pyrolysis of sewage sludge for the formation of PFRs. In this process, PFRs with a total number of spins of 9.533×1019 spins/g DS could be generated by pyrolysis of Fenton-conditioned sludge at 400°C. The direct thermal decomposition of natural organic matter (NOM) fractions contributed to the formation of carbon-centered radicals, while the Maillard reaction produced phenols precursors. Additionally, the reaction between aromatic proteins and iron played a crucial role in the formation of phenoxyl or semiquinone-type radicals. Kinetics analysis using discrete distributed activation energy model (DAEM) demonstrated that the average activation energy for pyrolysis was reduced from 178.28 kJ/mol for raw sludge to 164.53 KJ/mol for Fenton conditioned sludge. The reaction factor (fi) indicated that the primary reaction in Fenton-conditioned sludge comprised of 27 parallel first-order reactions, resulting from pyrolysis cleavage of the NOM fractions, the Maillard reaction, and iron catalysis. These findings are significant for understanding the formation process of PFRs from NOM in Fenton-conditioned sludge and provide valuable insight for controlling PFRs formation in practical applications.

Formation mechanisms and degradation methods of polycyclic aromatic hydrocarbons in biochar: A review

Biochar has been widely used in soil amendment and environmental remediation. Polycyclic aromatic hydrocarbons (PAHs) could be produced in preparation of biochar, which may pose potential risks to the environment and human health. At present, most studies focus on the ecotoxicity potential of biochar, while there are few systematic reviews on the formation mechanisms and mitigation strategies of PAHs in biochar. Therefore, a systematical understanding of the distribution, formation mechanisms, risk assessment, and degradation approaches of PAHs in biochar is highly needed. In this paper, the distribution and content of the total and bioavailable PAHs in biochar are reviewed. Then the formation mechanisms, influencing factors, and potential risk assessment of PAHs in biochar are systematically explored. After that, the effective strategies to alleviate PAHs in biochar are summarized. Finally, suggestions and perspectives for future studies are proposed. This review provides a guide for reducing the formation of biochar-associated PAHs and their toxicity, which is beneficial for the development and large-scale safe use of environmentally friendly biochar.

Biochar-based materials as remediation strategy in petroleum hydrocarbon-contaminated soil and water: Performances, mechanisms, and environmental impact

Petroleum contamination is considered as a major risk to the health of humans and environment. Biochars as low-cost and eco-friendly carbon materials, have been widely used for the removal of petroleum hydrocarbon in the environment. The purpose of this paper is to review the performance, mechanisms, and potential environmental toxicity of biochar, modified biochar and its integration use with other materials in petroleum contaminated soil and water. Specifically, the use of biochar in oil-contaminated water and soil as well as the factors that could influence the removal ability of biochar were systematically evaluated. In addition, the modification and integrated use of biochar for improving the removal efficiency were summarized from the aspects of sorption, biodegradation, chemical degradation, and reusability. Moreover, the functional impacts and associated ecotoxicity of pristine and modified biochars in various environments were demonstrated. Finally, some shortcoming of current approaches, and future research needs were provided for the future direction and challenges of modified biochar research. Overall, this paper gain insight into biochar application in petroleum remediation from the perspectives of performance enhancement and environmental sustainability.

Biochar-Derived Persistent Free Radicals: A Plethora of Environmental Applications in a Light and Shadows Scenario

Biochar (BC) is a carbonaceous material obtained by pyrolysis at 200-1000 °C in the limited presence of O2 from different vegetable and animal biomass feedstocks. BC has demonstrated great potential, mainly in environmental applications, due to its high sorption ability and persistent free radicals (PFRs) content. These characteristics enable BC to carry out the direct and PFRs-mediated removal/degradation of environmental organic and inorganic contaminants. The types of PFRs that are possibly present in BC depend mainly on the pyrolysis temperature and the kind of pristine biomass. Since they can also cause ecological and human damage, a systematic evaluation of the environmental behavior, risks, or management techniques of BC-derived PFRs is urgent. PFRs generally consist of a mixture of carbon- and oxygen-centered radicals and of oxygenated carbon-centered radicals, depending on the pyrolytic conditions. Here, to promote the more productive and beneficial use of BC and the related PFRs and to stimulate further studies to make them environmentally safer and less hazardous to humans, we have first reviewed the most common methods used to produce BC, its main environmental applications, and the primary mechanisms by which BC remove xenobiotics, as well as the reported mechanisms for PFR formation in BC. Secondly, we have discussed the environmental migration and transformation of PFRs; we have reported the main PFR-mediated application of BC to degrade inorganic and organic pollutants, the potential correlated environmental risks, and the possible strategies to limit them.

Enhanced Cr(VI) stabilization by terrestrial-derived soil protein: Photoelectrochemical properties and reduction mechanisms

Glomalin-related soil protein (GRSP) is a stable iron-organic carbon mixture that can enhance heavy metal sequestration in soils. However, the roles of GRSP in the transformation and fate of Cr(VI) have been rarely reported. Herein, we investigated the electrochemical and photocatalytic properties of GRSP and its mechanisms in Cr(VI) adsorption and reduction. Results showed that GRSP had a stronger ability for Cr(VI) adsorption and reduction than other biomaterials, with the highest adsorption amount of up to 0.126 mmol/g. The removal efficiency of Cr(VI) by GRSP was enhanced (4-7%) by ultraviolet irradiation due to the hydrated electrons produced by GRSP. Fe(II) ions, persistent free radicals, and oxygen-containing functional groups on the GRSP surface as electron donors participated in the reduction of Cr(VI) under dark condition. Moreover, Cr(III) was mainly adsorbed on the -COOH groups of GRSP via electrostatic interactions. Based on 2D correlation spectroscopy, the preferential adsorption occurred on the GRSP surface for Cr(VI) in the sequential order of CO → COO- → O-H → C-O. This work provides new insights into the Cr(VI) adsorption and reduction mechanism by GRSP. Overall, GRSP can serve as a natural iron-organic carbon for the photo-reduction of Cr(VI) pollution in environments.

Pristine and modified biochar applications as multifunctional component towards sustainable future: Recent advances and new insights

Employing biomass for environmental conservation is regarded as a successful and environmentally friendly technique since they are cost-effective, renewable, and abundant. Biochar (BC), a thermochemically converted biomass, has a considerably lower production cost than the other conventional activated carbons. This material's distinctive properties, including a high carbon content, good electrical conductivity (EC), high stability, and a large surface area, can be utilized in various research fields. BC is feasible as a renewable source for potential applications that may achieve a comprehensive economic niche. Despite being an inexpensive and environmentally sustainable product, research has indicated that pristine BC possesses restricted properties that prevent it from fulfilling the intended remediation objectives. Consequently, modifications must be made to BC to strengthen its physicochemical properties and, thereby, its efficacy in decontaminating the environment. Modified BC, an enhanced iteration of BC, has garnered considerable interest within academia. Many modification techniques have been suggested to augment BC's functionality, including its adsorption and immobilization reliability. Modified BC is overviewed in its production, functionality, applications, and regeneration. This work provides a holistic review of the recent advances in synthesizing modified BC through physical, chemical, or biological methods to achieve enhanced performance in a specific application, which has generated considerable research interest. Surface chemistry modifications require the initiation of surface functional groups, which can be accomplished through various techniques. Therefore, the fundamental objective of these modification techniques is to improve the efficacy of BC contaminant removal, typically through adjustments in its physical or chemical characteristics, including surface area or functionality. In addition, this article summarized and discussed the applications and related mechanisms of modified BC in environmental decontamination, focusing on applying it as an ideal adsorbent, soil amendment, catalyst, electrochemical device, and anaerobic digestion (AD) promoter. Current research trends, future directions, and academic demands were available in this study.

Biochar modulating soil biological health: A review

Biochar can be used for multifunctional applications including the improvement of soil health and carbon storage, remediation of contaminated soil and water resources, mitigation of greenhouse gas emissions and odorous compounds, and feed supplementation to improve animal health. A healthy soil preserves microbial biodiversity that is effective in supressing plant pathogens and pests, recycling nutrients for plant growth, promoting positive symbiotic associations with plant roots, improving soil structure to supply water and nutrients, and ultimately enhancing soil productivity and plant growth. As a soil amendment, biochar assures soil biological health through different processes. First, biochar supports habitats for microorganisms due to its porous nature and by promoting the formation of stable soil micro-aggregates. Biochar also serves as a carbon and nutrient source. Biochar alters soil physical and chemical properties, creating optimum soil conditions for microbial diversity. Biochar can also immobilize soil pollutants and reduce their bioavailability that would otherwise inhibit microbial growth. However, depending on the pyrolysis settings and feedstock resources, biochar can be comprised of contaminants including polycyclic aromatic hydrocarbons and potentially toxic elements that can inhibit microbial activity, thereby impacting soil health.

Persistent free radicals on biochar for its catalytic capability: A review

Biochar is an economical carbon material for water pollution control, which shows great promise to be applied in the up-scale wastewater remediation processes. Previous studies demonstrate that persistent free radicals (PFRs) on biochar are critical to its reactivity for wastewater remediation. A series of studies have revealed the important roles of PFRs when biochar was applied for organic pollutants degradation as well as the removal of Cr (VI) and As (III) from wastewater. Therefore, this review comprehensively concludes the significance of PFRs for the catalytic capabilities of biochar in advanced oxidation processes (AOPs)-driven organic pollutant removal, and applied in redox processes for Cr (VI) and As (III) remediation. In addition, the mechanisms for PFRs formation during biochar synthesis are discussed. The detection methods are reviewed for the quantification of PFRs on biochar. Future research directions were also proposed on underpinning the knowledge base to forward the applications of biochar in practical real wastewater treatment.

Effects of excess sludge composting process, environmentally persistent free radicals, and microplastics on antibiotics degradation efficiency of aging biochar

Simulation of microbial aging biochar in compost is an important index for evaluating the biochar degradation efficiency of antibiotics. In this study, biochar was prepared by adding microplastics (MPs) to sludge, and the degradation effect of biochar/(peroxymonosulfate, PMS) on antibiotics was evaluated during the compost aging process of biochar. After the compost aging of biochars, the antibiotic degradation efficiency of HPBC500, HPBC500 + polystyrene (PS), HPBC900/PMS, and HPBC900 + PS/PMS decreased by 6.47, 15.2, 10.16, and 10.33 %, respectively. Environmentally persistent free radicals (EPFRs) and defect structure were the main contributors to the activation of PMS. EPFRs produced through PS pyrolysis of biochar exhibited strong reactivity but poor stability during the degradation of antibiotics. Biochar enhanced the growth of microorganisms in compost but reduced its specific surface area. The antibiotic degradation efficiency of the biochar was positively correlated with the concentration of EPFRs. This study elucidated the durability of different biochar toward antibiotic degradation.

Combined microbe-plant remediation of cadmium in saline-alkali soil assisted by fungal mycelium-derived biochar

Cadmium contamination in saline-alkali soil is becoming a great concern. Combined microbe-plant remediation is an economic way to treat this contamination, but is compromised by its low cadmium-removing capacity. In this study, the novel fungus-derived biochar was prepared to enhance the salt-tolerant bacterium-plant remediation of cadmium-contaminated saline-alkali soil. This biochar was prepared by pre-incubation of living Trichoderma atroviride hyphae with imidazole and further heating at 500 °C for 1 h. The obtained fungus-derived nitrogen-doped biochar (FBioCN) exhibited the high affinity to bacterial cells, leading to efficient colonization of exogenous salt-tolerant bacteria (e.g., Rhizobacter sp. and Sphingomonas sp.) on Amaranthus hypochondriacus roots. During culturing of the plants in the cadmium-contaminated saline-alkali soil, FBioCN drastically remodeled the rhizosphere microbiome, leading to enhance colonization of the exogeneous salt-tolerant bacteria, and increase bacterial diversity. The combination of FBioCN and the exogeneous bacteria further improved the activity of rhizosphere functional enzymes, protected the plants from the multiple stress, and promoted cadmium transport from the soil to the plants. Consequently, FBioCN together with the salt-tolerant bacteria drastically improved cadmium removal from the saline-alkali soil, with the percent of cadmium removal at the rhizosphere region increasing from 35.1% to 95.1%. This study sheds a light on the application of fungus-derived biochar in combined microbe-plant remediation in saline-alkali soil.

Remediation of di(2-ethylhexyl) phthalate (DEHP) contaminated black soil by freeze-thaw aging biochar

Di(2-ethylhexyl) phthalate (DEHP), a complex structure with high toxicity, is a common organic pollutant. This study investigated the effects of fresh biochar (FBC), and freeze-thaw cycled aged biochar (FTC-BC) on DEHP-contaminated soils using a pot experiment. The specific surface area of FBC increased from 145.20 to 303.50 m2/g, and oxygen-containing functional groups increased from 1.26 to 1.48 mol/g after freeze-thaw cycles, greatly enhancing the adsorption of DEHP by biochar in the soil. The comprehensive radar chart evaluation showed that FBC and FTC-BC reduced DEHP growth stress and improved the soil properties. Compared with FBC, FTC-BC performed better in protecting the normal growth of pakchoi and improving soil properties. In addition, the application of biochar increased the diversity and abundance of bacteria in the DEHP-contaminated soil and changed the composition of the soil bacterial community. The partial least squares path model (PLS-PM) showed that adding biochar as a soil remediation agent significantly positively impacted soil nutrients and indirectly reduced the DEHP levels in soil and plants by increasing soil microbial diversity. Compared with FBC, FTC-BC creates a more satisfactory living environment for microorganisms and has a better effect on the degradation of DEHP in the soil. This study provides a theoretical basis for future biochar remediation of DEHP-contaminated soils in cold high-latitude regions.

Application of nitrogen-rich sunflower husks biochar promotes methane oxidation and increases abundance of Methylobacter in nitrogen-poor soil

The area of sunflower crops is steadily increasing. A beneficial way of managing sunflower waste biomass could be its use as a feedstock for biochar production. Biochar is currently being considered as an additive for improving soil parameters, including the ability to oxidise methane (CH4) - one of the key greenhouse gases (GHG). Despite the high production of sunflower husk, there is still insufficient information on the impact of sunflower husk biochar on the soil environment, especially on the methanotrophy process. To fill this knowledge gap, an experiment was designed to evaluate the effects of addition of sunflower husk biochar (produced at 450-550 °C) at a wide range of doses (1-100 Mg ha-1) to Haplic Luvisol. In the presented study, the CH4 oxidation potential of soil with and without sunflower husk biochar was investigated at 60 and 100% water holding capacity (WHC), and with the addition of 1% CH4 (v/v). The comprehensive study included GHG exchange (CH4 and CO2), physicochemical properties of soil (pH, soil organic carbon (SOC), dissolved organic carbon (DOC), nitrate nitrogen (NO3--N), WHC), and the structure of soil microbial communities. That study showed that even low biochar doses (5 and 10 Mg ha-1) were sufficient to enhance pH, SOC, DOC and NO3--N content. Importantly, sunflower husk biochar was significant source of NO3--N, which soil concentration increased from 9.40 ± 0.09 mg NO3--N kg-1 for the control to even 19.40 ± 0.26 mg NO3--N kg-1 (for 100 Mg ha-1). Significant improvement of WHC (by 11.0-12.4%) was observed after biochar addition at doses of 60 Mg ha-1 and higher. At 60% WHC, application of biochar at a dose of 40 Mg ha-1 brought significant improvements in CH4 oxidation rate, which was 4.89 ± 0.37 mg CH4-C kg-1 d-1. Higher biochar doses were correlated with further improvement of CH4 oxidation rates, which at 100 Mg ha-1 was seventeen-fold higher (8.36 ± 0.84 mg CH4-C kg-1 d-1) than in the biochar-free control (0.48 ± 0.28 mg CH4-C kg-1 d-1). CO2 emissions were not proportional to biochar doses and only grew circa (ca.) twofold from 3.16 to 6.90 mg CO2-C kg-1 d-1 at 100 Mg ha-1. Above 60 Mg ha-1, the diversity of methanotrophic communities increased, with Methylobacter becoming the most abundant genus, which was as high as 7.45%. This is the first, such advanced and multifaceted study of the wide range of sunflower husk biochar doses on Haplic Luvisol. The positive correlation between soil conditions, methanotroph abundance and CH4 oxidation confirmed the multifaceted, positive effect of sunflower husk biochar on Haplic Luvisol. Sunflower husk biochar can be successfully used for Haplic Luvisol supplementation. This additive facilitates soil protection against degradation and has the potential to mitigate GHG emissions.

Biochar-Associated Free Radicals Reduce Soil Bacterial Diversity: New Insight into Ecoenzymatic Stoichiometry

The toxicity of environmentally persistent free radicals (EPFRs), often generated during biochar production, on soil bacteria is still not truly reflected when considering the conditions in real soil. Herein, the influence of free radicals within biochar on soil bacteria was investigated from the perspectives of enzyme activity, community structure, and ecoenzymatic stoichiometry. Biochar addition enhanced the contents of EPFRs and derived hydroxyl radicals (•OH) in the soil, while it reduced bacterial alpha diversity by 5.06-35.44%. The results of redundancy analysis and inhibition experiments collectively demonstrated the key role of EPFRs and •OH in reducing the bacterial alpha diversity. Specifically, EPFRs and •OH increased the stoichiometric imbalance by promoting the release of dissolved organic carbon and ammonium N, thus aggravating the P limitation in soil. This was further confirmed by increased alkaline phosphatase activity from 702 to 874 nmol g-1 h-1. The P limitation induced by EPFRs and •OH decreased the bacterial alpha diversity, as evidenced by the negative correlation between P limitation and bacterial alpha diversity (r2 = -0.931 to -0.979, P < 0.01) and the structural equation model. The obtained results demonstrate a ubiquitous but previously overlooked mechanism for bacterial toxicity of biochar-associated free radicals, providing scientific guidance for safe utilization of biochar.

Genome features of a novel hydrocarbonoclastic Chryseobacterium oranimense strain and its comparison to bacterial oil-degraders and to other C. oranimense strains

For the first time, we report the whole genome sequence of a hydrocarbonoclastic Chryseobacterium oranimense strain isolated from Trinidad and Tobago (COTT) and its genes involved in the biotransformation of hydrocarbons and xenobiotics through functional annotation. The assembly consisted of 11 contigs with 2,794 predicted protein-coding genes which included a diverse group of gene families involved in aliphatic and polycyclic hydrocarbon degradation. Comparative genomic analyses with 18 crude-oil degrading bacteria in addition to two C. oranimense strains not associated with oil were carried out. The data revealed important differences in terms of annotated genes involved in the hydrocarbon degradation process that may explain the molecular mechanisms of hydrocarbon and xenobiotic biotransformation. Notably, many gene families were expanded to explain COTT's competitive ability to manage habitat-specific stressors. Gene-based evidence of the metabolic potential of COTT supports the application of indigenous microbes for the remediation of polluted terrestrial environments and provides a genomic resource for improving our understanding of how to optimize these characteristics for more effective bioremediation.

A short review on environmental distribution and toxicity of the environmentally persistent free radicals

Environmentally Persistent Free Radicals (EPFRs) are usually generated by the electron transfer of a certain radical precursor on the surface of a carrier. They are characterized with high activity, wide migration range, and relatively long half-life period. In this review, we summarized the literature on EPFRs published since 2010, including their environmental occurrence and potential cytotoxicity and biotoxicity. The EPFRs in the atmosphere are the most abundant in the environment, mainly generated from the combustion of raw materials or biochar, and the C-center types (quinones, semiquinones radicals, etc.) may exist for a relatively long time. These EPFRs can transform into other substances (such as reactive oxygen species, ROS) under the influence of environmental factors, and partly enter soil and water by wet and dry deposition of particulate matter, which may promote the generation of EPFRs in those media. The wide distribution of EPFRs in the environment may lead to their exposure to biota including humans, resulting in cytotoxicity and biotoxicity. The EPFRs can influence the normal redox process of the biota, and generate a large number of free radicals like ROS. Exposure to EPFRs may change the expression of gene and activity of metabolic enzymes, and damage the cells, as well as some organs such as the lung, trachea, and heart. However, due to the difficulty in sample extraction, identification, and quantification of the specific EPFR individuals, the toxicity and exposure evaluation of biota are still limited which merits study in the future.

Reduction of byproduct formation and cytotoxicity to mammalian cells during post-chlorination by the combined pretreatment of ferrate(VI) and biochar

Ferrate [Fe(VI)] can efficiently degrade various pollutants in wastewater. Biochar application can reduce resource use and waste emission. This study investigated the performance of Fe(VI)/biochar pretreatment to reduce disinfection byproducts (DBPs) and cytotoxicity to mammalian cells of wastewater during post-chlorination. Fe(VI)/biochar was more effective at inhibiting the cytotoxicity formation than Fe(VI) alone, reducing the cytotoxicity from 12.7 to 7.6 mg-phenol/L. The concentrations of total organic chlorine and total organic bromine decreased from 277 to 130 μg/L and from 51 to 39 μg/L, compared to the samples without pretreatment. Orbitrap ultra-high resolution mass spectrometry revealed that the number of molecules of DBPs decreased substantially from 517 to 229 by Fe(VI)/biochar, with the greatest reduction for phenols and highly unsaturated aliphatic compounds. In combination with the substantial reduction of 1Cl-DBPs and 2Cl-DBPs, 1Br-DBPs and 2Br-DBPs were also reduced. Fluorescence excitation-emission matrix coupled with parallel factor analysis suggested that fulvic acid-like substances and aromatic amino acid was obviously reduce likely due to the enhanced oxidation of Fe(IV)/Fe(V) produced by Fe(VI)/biochar and adsorption of biochar. Furthermore, the DBPs generated by electrophilic addition and electrophilic substitution of precursors were reduced. This study shows that Fe(VI)/biochar pretreatment can effectively reduce cytotoxicity formation during post-chlorination by transforming DBPs and their precursors.

Comparative 6+studies of environmentally persistent free radicals on nano-sized coal dusts

Coal dust is the major hazardous pollutant in the coal mining environment. Recently environmentally persistent free radicals (EPFRs) were identified as one of the key characteristics which could impart toxicity to the particulates released into the environment. The present study used Electron Paramagnetic Resonance (EPR) spectroscopy to analyze the characteristics of EPFRs present in different types of nano-size coal dust. Further, it analyzed the stability of the free radicals in the respirable nano-size coal dust and compared their characteristics in terms of EPR parameters (spin counts and g-values). It was found that free radicals in coal are remarkably stable (can remain intact for several months). Also, Most of the EPFRs in the coal dust particles are either oxygenated carbon centered or a mixture of carbon and oxygen-centered free radicals. EPFRs concentration in the coal dust was found to be proportional to the carbon content of coal. The characteristic g-values were found to be inversely related to the carbon content of coal dust. The spin concentrations in the lignite coal dust were between 3.819 and 7.089 μmol/g, whereas the g-values ranged from 2.00352 to 2.00363. The spin concentrations in the bituminous coal dust were between 11.614 and 25.562 μmol/g, whereas the g-values ranged from 2.00295 to 2.00319. The characteristics of EPFRs present in coal dust identified by this study are similar to the EPFRs, which were found in other environmental pollutants such as combustion-generated particulates, PM_2.5, indoor dust, wildfires, biochar, haze etc., in some of the previous studies. Considering the toxicity analysis of environmental particulates containing EPFRs similar to those identified in the present study, it can be confidently hypothesized that the EPFRs in the coal dust might play a major role in modulating the coal dust toxicity. Hence, it is recommended that future studies should analyze the role of EPFR-loaded coal dust in mediating the inhalation toxicity of coal dust.

Applications, impacts, and management of biochar persistent free radicals: A review

Biochar is a promising environmental contaminant remediation agent because of its adsorptive and catalytic properties. However, the environmental effects of persistent free radicals (PFRs) produced by biomass pyrolysis (biochar production) are still poorly understood, though they have received increasing research attention in recent years. Although PFRs both directly and indirectly mediate biochar's removal of environmental pollutants, they also have the potential to cause ecological damage. In order to support and sustain biochar applications, effective strategies are needed to control the negative effects of biochar PFRs. Yet, there has been no systematic evaluation of the environmental behavior, risks, or management techniques of biochar PFRs. Thus, this review: 1) outlines the formation mechanisms and types of biochar PFRs, 2) evaluates their environmental applications and potential risks, 3) summarizes their environmental migration and transformation, and 4) explores effective management strategies for biochar PFRs during both production and application phases. Finally, future research directions are recommended.

Scientific and regulatory challenges of environmentally persistent free radicals: From formation theory to risk prevention strategies

EPFRs (Environmentally Persistent Free Radicals) are a class of pollutants that have been identified as potential environmental contaminants due to their persistence and ability to generate reactive oxygen species (ROS) that can cause oxidative stress in living organisms. However, no study has comprehensively summarized the production conditions, influencing factors and toxic mechanisms of EPFRs, impeding exposure toxicity assessments and risk prevention strategies. To bridge the gap between theoretical research and practical application, a thorough literature review to summarize the formation, environmental effects, and biotoxicity of EPFRs are conducted. A total of 470 relevant papers were screened in Web of Science Core collection databases. The transfer of electrons between interfaces and the cleavage of covalent bonds of persistent organic pollutants is crucial to the generation of EPFRs, which is induced by external sources of energy, including thermal energy, light energy, transition metal ions, and others. In the thermal system, the stable covalent bond of organic matter can be destroyed by heat energy at low temperature to form EPFRs, while the formed EPFRs can be destroyed at high temperature. Light can also accelerate the production of free radicals and promote the degradation of organic matter. The persistence and stability of EPFRs are synergistically influenced by individual environmental factors such as environmental humidity, oxygen content, organic matter content, and environmental pH. Studying the formation mechanism of EPFRs and their biotoxicity is essential for fully understanding the hazards posed by these emerging environmental contaminants.

Effect of aged biochar after microbial fermentation on antibiotics removal: Key roles of microplastics and environmentally persistent free radicals

For the first time, biochar was prepared by changing the polystyrene (PS) content in sludge, and the efficiency of antibiotics removal by biochar was evaluated after fermentation aging. Fermentation aging affects the efficiency of antibiotics removal by reducing the specific surface area and active sites of biochar. The antibiotics removal efficiency of different types of biochar after aging decreased by 5.95%-13.59%. Owing to the biotoxicity of biochar, the relative abundance of most communities decreased during fermentation, whereas Anaerolineae still increased (14.29% to 33.05% or 33.02%). However, controlled experiments confirmed that biochar was much less toxic to Scenedesmus obliquus than to antibiotics, with concentrations of 11.09 × 10⁵ cells/mL and 0.188 × 10⁵ cells/mL, respectively. With the positive effect of environmentally persistent free radicals (EPFRs) considered, increasing the PS content in sludge facilitated the removal of antibiotics by biochar. This study assesses the stability of biochar in removing antibiotics after long-term microbial aging.

Transformation of phosphorus species during phosphoric acid-assisted pyrolysis of lignocellulose

Phosphoric acid-assisted pyrolysis (PAAP) is a pyrolysis technique with potential for the engineered and environmental application. Nevertheless, the volatilisation, immobilisation, and dissolution of phosphorus (P) species have been neglected during PAAP of lignocellulose. Therefore, we compared the transformation of P species with direct-pyrolysis and PAAP system, using multiple techniques including gas chromatography tandem mass spectrometry (GCMS) and ³¹P nuclear magnetic resonance (NMR). It was also investigated that the properties of pyrogenic and modified carbons obtained from lignocellulose pyrolysis at 200-650 °C. As the temperature increased, volatile P species evolved into gas-phase during PAAP, inhibiting the formation of the macromolecular volatile components. Compared with pyrogenic carbons, modified carbons with more aromatic structures experienced a higher degree of dehydration and cyclisation via catalytic crosslinking reaction. PAAP system facilitated more generation of persistent free radical (PFR) below 500 °C and the attenuation of PFR signals was observed at 500-650 °C, which may be associated with the sequestration and elimination of P species between carbon matrix. Notably, three configurations of C₃PO, CPO, and COP were the major combinations of P and C elements on modified carbons. Increased gaseous P and decreased soluble P were observed with elevated temperatures in PAAP system. The species proportion of immobilised P clearly demonstrated the transformation of partial P species from inorganic to organic through pyrolysis. The immobilised P could serve as a potential sustained-release source participating in P biogeochemical cycles. These findings are fundamental for the technical design of lignocellulose pyrolysis.

Green Inhibition of Corrosion of Aluminium Alloy 5083 by Artemisia annua L. Extract in Artificial Seawater

Plant extracts are increasingly being examined in the corrosion inhibition of metal and alloys in various environments due to their potent antioxidant properties. The use of Artemisia annua L. aqueous extract (AAE) as an aluminium alloy 5083 (ALA) corrosion inhibitor in artificial seawater (ASW) was investigated using electrochemical tests and spectroscopy tools, while the active biocompounds found in AAE were analyzed using high-performance liquid chromatography (HPLC). Electrochemical results showed that AAE acts as an anodic inhibitor through the physisorption (ΔG ≈ –16.33 kJ mol−1) of extract molecules on the ALA surface, thus reducing the active sites for the dissolution of the alloy in ASW. Fourier-transform infrared spectra confirmed that phenolic acids found in AAE formed the surface layer that protects ALA against the corrosive marine environment, while HPLC analysis confirmed that the main phytoconstituents of AAE were chlorogenic acid and caffeic acid. The inhibition action of phenolic acids and their derivatives found in the AAE was based on the physisorption of caffeic acid on the ALA surface, which improved physicochemical properties of the barrier film and/or conversion of Al3+ to elemental aluminium by phenolic acids as reducens, which slowed down the diffusion rate of Al3+ to or from the ALA surfaces. The protective effect of the surface layer formed in the presence of AAE against ASW was also confirmed by inductively coupled plasma–optical emission spectrometry (ICP-OES) whereby the measured concentration of Al ions after 1 h of immersion of ALA in the pure ASW was 15.30 μg L−1 cm−2, while after the addition of 1 g L−1 AAE, the concentration was 3.09 μg L−1 cm−2.

Applications of biochar in sulfate radical-based advanced oxidation processes for the removal of pharmaceuticals and personal care products

Recently, biochar (BC) has been increasingly used as a catalyst for the degradation of 'emerging pollutants' (EPs). Pharmaceuticals and personal care products (PPCPs), which come under 'EPs', can be harmful to the aquatic ecosystem despite being present in very low concentrations (ng/L-μg/L). Advanced oxidation processes (AOPs), which produce sulfate radical (SR-AOPs), show a great potential to degrade PPCPs effectively from wastewater. It is mainly due to the higher stability, long half-lives and better non-selectivity of SO₄^{• -} compared with AOPs with •OH generation. Furthermore, research focus is now given on AOPs coupled with BC-supported catalyst to enhance the degradation of PPCPs because of quicker generation of radicals (•OH, SO₄^•-) by the activation of persulfate (PS) and peroxymonosulfate (PMS). This article sheds light on the catalytic ability of BC after its physical and chemical modifications such as acid/alkali treatment and metal doping. The role of persistent free radicals (PFRs) in the BC for effective removal of PPCPs has been elaborated. Its potential applications in synthetic as well as real wastewater have also been discussed.

Removal mechanism of tetracycline-Cr(Ⅵ) combined pollutants by different S-doped sludge biochars: Role of environmentally persistent free radicals

In this work, by using sodium thiosulfate as the S source, S-doped biochars were prepared to remove tetracycline/hexavalent chromium (TC-Cr (Ⅵ)) combined pollutants in aqueous solutions. The concentration of environmentally persistent free radicals (EPFRs) was used to directly determine the degradation of TC and the reduction of Cr (Ⅵ). The concentration of EPFRs in S-doped hydrothermal + pyrocarbon (S-HPBC) (3.64 × 10¹⁹ spins/g) was greater than that of S-doped hydrochar (S-HBC) (5.64 × 10¹⁸ spins/g) and S-doped pyrocarbon (S-PBC) (6.53 × 10¹⁸ spins/g). The increase in EPFRs concentration after S doping was positively correlated with the number of defect structures. In the TC-Cr (Ⅵ) system, the reduction efficiency of Cr (Ⅵ) decreased due to competition for electrons, while the TC degradation efficiency remained high. This was likely because Cr (Ⅵ) reduction promoted the degradation of TC. In addition, de-complexation was the primary factor for the removal of TC-Cr (Ⅵ), and some ROS were consumed during this process. The thiophene groups (-C-S-C-) that formed after S-doping of biochar were the main functional groups involved in the catalytic degradation of TC. In the radical pathway, SO₄^•- and •OH provided the greatest contribution to the degradation of TC, while ¹O₂ contributed the most to TC degradation via a non-radical pathway. The regeneration experiment confirmed that S-doped biochar could be reused and maintained a high pollutant removal efficiency. S-HPBC is a promising modified biochar material for removing mixed pollutants.

Ecotoxicological characterization of engineered biochars produced from different feedstock and temperatures

Biochar (BC) engineering, which has recently gained a lot of interest, allows designing the functional materials. BC modification improves the properties of pristine biochar, especially in terms of adsorption parameters. An interesting type of modification is the introduction of metals into the BC's structure. There is a knowledge gap regarding the effects of modified BC (e.g., BC-Mg, BC-Zn) on organisms. The aim of this study was the ecotoxicological evaluation of BC-Mg and BC-Zn composites, received under diverse conditions from willow or sewage sludge at 500 or 700 °C. The ecotoxicological tests with bacteria Vibrio fischeri (V. fischeri) and invertebrates Folsomia candida (F. candida) were applied to determine the toxicity of BC. The content of toxic substances (e.g., polycyclic aromatic hydrocarbons (PAHs), heavy metals (HMs), environmentally persistent free radicals (EPFRs)) in BC were also determined and compared with ecotoxicological parameters. The ecotoxicity of studied BCs depends on many variables: feedstock type, pyrolysis temperature and the modification type. The Zn and Mg modification reduced (from 28 to 63 %) the total Ʃ16 PAHs content in willow-derived BCs while in SL-derived BCs the total Ʃ16 PAHs content was even 1.5-3 times higher compared to pristine BCs. The Zn modified willow-derived BCs affected positively on F. candida reproduction but showed inhibition of luminescence V. fischeri. BC-Mg exhibited harmful effect to F. candida. The ecotoxicological assessment carried out sheds light on the potential toxicity of BC-Zn and BC-Mg composites, which are widely used in the removal of heavy metals, pharmaceuticals, dyes from waters and soils.

Pollution characteristics of environmental persistent free radicals (EPFRs) and their contribution to oxidation potential in road dust in a large city in northwest China

Environmental persistent free radicals (EPFRs) are new environmental health risk substances in the atmosphere, and their oxidative toxicity (OT) has not been strongly confirmed. In this study, the fugitive characteristics of EPFRs in road dust in a metropolitan city located in northwest China, and their potential oxidative toxicity were investigated. The results showed that the road dust contains Carbon-centered EPFRs with the mean mass concentration of (6.6 ± 5.0) × 10¹⁷ spins/g. EPFRs in road dust are degradable and have a half-life of 4.5 years. The water insoluble (WIS) components contribute 71% to the oxidative toxicity of road dust and show a rapid toxicity generation process, while the oxidative toxicity generation rate of water-soluble dust is more stable. Based on the positive matrix factorization (PMF) model, the contribution of EPFRs-dominated factors to Total-OT and WIS-OT is 17.3% and 33.3%, respectively. The PMF model results indicated that different types of EPFRs contributed differently to the oxidative toxicity of road dust and Carbon-centered EPFRs are more likely to participate in reactive oxygen species generation. Our results highlight that the EPFRs are an important contributor to the oxidative toxicity of atmospheric particulate matter, and their oxidative toxicity is dependent on the types of free radicals. It also provides an important insight into the influence of other potentially toxic substances on the oxidative toxicity of atmospheric PM.

Rapid Simulation of Decade-Scale Charcoal Aging in Soil: Changes in Physicochemical Properties and Their Environmental Implications

In situ aging can change biochar properties, influencing their ecosystem benefits or risks over time. However, there is a lack of field verification of laboratory methods that attempt simulation of long-term natural aging of biochar. We exploited a decade-scale natural charcoal (a proxy for biochar) aging event to determine which lab-aging methods best mimicked field aging. We oxidized charcoal by ultraviolet A radiation (UVA), H₂O₂, or monochloramine (NH₂Cl), and compared it to 10-year field-aged charcoal. We considered seven selected charcoal properties related to surface chemistry and organic matter release, and found that oxidation with 30% H₂O₂ most representatively simulated 10-year field aging for six out of seven properties. UVA aging failed to approximate oxidation levels while showing a distinctive dissolved organic carbon (DOC) release pattern. NH₂Cl-aged charcoal was the most different, showing an increased persistent free radical (PFR) concentration and lower hydrophilicity. All lab oxidation techniques overpredicted polycyclic aromatic hydrocarbon release. The O/C ratio was well-correlated with DOC release, PFR concentration, surface charge, and charcoal pH, indicating the possibility to accurately predict biochar aging with a reduced suite of physicochemical properties. Overall, our rapid and verified lab-aging methods facilitate research toward derisking and enhancing long-term benefits of biochar application.

Role of biochar-based free radicals in immobilization and speciation of metals in the contaminated soil-plant environment

The structure of biochar produced at various pyrolysis temperatures influences metal geochemical behavior. Here, the impact of wheat straw-derived biochar (300, 500, and 700 °C) on the immobilization and transformation of metals in the contaminated soil-plant system was assessed. The findings of the sequential extraction revealed that biochar additives had a substantial influence on the speciation of Cr, Ni, Pb, and Zn in the contaminated soil. The lowest F1 (exchangeable and soluble fraction) + F2 (carbonate fraction) accounted for Cr (44%) in WB-300, Ni (43.87%) in WB-500, Pb (43.79%), and Zn (49.78%) in WB-700 with applied amendments of their total amounts. The characterization results indicated that high pyrolysis temperatures (300-700 °C) increased the carbon-containing groups with the potential to adsorb metals from the soil-plant environment. The bioconcentration and translocation factors (BCF and TF) were less than 1, indicating that metal concentration was restricted to maize roots and translocation to shoots. Reactive oxygen species (ROS) intracellularly influence metal interactions with plants. Electron paramagnetic resonance (EPR) was performed to determine hydroxyl radical generation (•OH) in plant segments to assess the dominance of free radicals (FRs). Consequently, the formation of •OH significantly depends on the pyrolysis temperature and the interaction with a contaminated soil-plant environment. Thus, metal transformation can be effectively decreased in the soil-plant environment by applying WB amendments.

Integrating Biochar, Bacteria, and Plants for Sustainable Remediation of Soils Contaminated with Organic Pollutants

The contamination of soil with organic pollutants has been accelerated by agricultural and industrial development and poses a major threat to global ecosystems and human health. Various chemical and physical techniques have been developed to remediate soils contaminated with organic pollutants, but challenges related to cost, efficacy, and toxic byproducts often limit their sustainability. Fortunately, phytoremediation, achieved through the use of plants and associated microbiomes, has shown great promise for tackling environmental pollution; this technology has been tested both in the laboratory and in the field. Plant-microbe interactions further promote the efficacy of phytoremediation, with plant growth-promoting bacteria (PGPB) often used to assist the remediation of organic pollutants. However, the efficiency of microbe-assisted phytoremediation can be impeded by (i) high concentrations of secondary toxins, (ii) the absence of a suitable sink for these toxins, (iii) nutrient limitations, (iv) the lack of continued release of microbial inocula, and (v) the lack of shelter or porous habitats for planktonic organisms. In this regard, biochar affords unparalleled positive attributes that make it a suitable bacterial carrier and soil health enhancer. We propose that several barriers can be overcome by integrating plants, PGPB, and biochar for the remediation of organic pollutants in soil. Here, we explore the mechanisms by which biochar and PGPB can assist plants in the remediation of organic pollutants in soils, and thereby improve soil health. We analyze the cost-effectiveness, feasibility, life cycle, and practicality of this integration for sustainable restoration and management of soil.

Removal of Tetracycline Hydrochloride from Water by Visible-Light Photocatalysis Using BiFeO3/BC Materials

It is widely considered that photocatalysis is an effective and eco-friendly method of dealing with organic pollutants dissolved in water. Nonetheless, photocatalysts still have some drawbacks, such as poor visible-light absorption, easy recombination of photogenerated charge carriers, and limited active sites. In this study, bismuth ferrite coupled with biochar material (BiFeO3/BC) was simply synthesized, and its photocatalysis reactivity was systemically examined under an irradiation of λ > 400 nm. The experimental results showed that under a relatively acidic environment, the removal rate of tetracycline hydrochloride reached 95%. Using a variety of characterization investigations, we analyzed the morphology structure and chemical composition of BiFeO3/BC. In consideration of simple preparation and high respondence toward visible light, further explorations of BiFeO3/BC and its properties and optimized degradation conditions are worthwhile.

Medium-Low Temperature Conditions Induce the Formation of Environmentally Persistent Free Radicals in Microplastics with Conjugated Aromatic-Ring Structures during Sewage Sludge Pyrolysis

Medium-low temperature pyrolysis is an effective method of retaining active components in sludge char. However, we found that incomplete cracking reactions resulted in residues of microplastics (MPs) remaining in the char; moreover, high levels of environmentally persistent free radicals (EPFRs) were detected in these MPs. Here, we investigated the temperature-dependent variations in the char-volatile products derived from sludge and MPs under different pyrolysis scenarios using multiple in situ probe coupling techniques and electron paramagnetic resonance spectroscopy, thereby identifying the sources of EPFRs and elucidating the corresponding formation-conversion mechanisms. The temperature was the key factor in the formation of EPFRs; in particular, in the 350-450 °C range, the abundance of EPFRs increased exponentially. Reactive EPFR readily formed in MPs with conjugated aromatic-ring structures (polyethylene terephthalate and polystyrene) at a temperature above 350 °C; EPFR concentrations were 5-17 times higher than those found in other types of polymers, and these radicals exhibited half-lives of more than 90 days. The EPFR formation mechanism could be summarized as solid-solid/solid-gas interfacial interactions between the polymers and the intermediate products from sludge pyrolysis (at 160-350 °C) and the homolytic cleavage-proton transfer occurring in the polymers themselves under the dual action of thermal induction and acid sites (at 350-450 °C). Based on the understanding of the evolution of EPFRs, temperature regulation and sludge components conditioning may be effective approaches to inhibit the formation of EPFRs in MPs, constituting reliable strategies to diminish the environmental risk associated with the byproducts of sludge pyrolysis.

Corncob biochar combined with Bacillus subtilis to reduce Cd availability in low Cd-contaminated soil

Soil contamination by heavy metals such as Cd can pose a risk to the environment and human health. However, Cd is difficult to immobilize at low concentration levels in soil. Individually, Bacillus subtilis and biochar have been shown to be inefficient at immobilizing Cd in soil. In this study, corncob biochar was generated at different pyrolysis temperatures (300 °C-550 °C), and the Cd immobilization efficiency and performance of corncob biochar loaded with B. subtilis (CB@B) and corncob biochar alone (CB) were evaluated in solutions and in soil. The characterization (SEM and FTIR) of CB generated at different pyrolysis temperatures and CB generated at different pyrolysis temperatures in CB@B (300 °C-550 °C) indicated that a superior pore structure and abundant O-functional groups were obtained at a pyrolysis temperature of 400 °C for both CB@B and CB. The X-ray diffraction and X-ray photoelectron spectroscopy results indicate that the formation of Cd compounds was associated with the positive combined biosorption effect of the bacteria and biochar, electronic adsorption, activity of the O-functional groups (C[double bond, length as m-dash]O, COOH, OH, and Si-O-Si), and complexation between extracellular substances and Cd²⁺. Adsorption experiments were conducted in a solution to assess the effects of various operating parameters such as the time, pH, and adsorbent dose. The 400 °C-CB@B and 400 °C-CB samples achieved the largest reductions in the Cd concentration at 81.21% and 5.70%, respectively. Then, CaCl₂ extraction experiments were conducted in soil, and using 0.25%-CB@B, a 55.21% decrease was realized in the Cd concentration after 56 days and a 16.71% increase was realized in soil pH to 8.38. No significant difference was observed in the CB-treated groups, among which 1.0%-CB achieved the largest reduction of 26.08% after 56 days and a 3.20% increase in the soil pH to 7.41. The Tessier sequential extraction method obtained similar trends. Overall, 400 °C-CB@B demonstrated outstanding immobilization efficiency and durability, indicating that it provided a safe and nutrient-rich habitat for B. subtilis to realize a synergistic effect for Cd immobilization.

Effects of Nitrogen Oxides on the Production of Reactive Oxygen Species and Environmentally Persistent Free Radicals from α-Pinene and Naphthalene Secondary Organic Aerosols

Reactive oxygen species (ROS) and environmentally persistent free radicals (EPFR) play an important role in chemical transformation of atmospheric aerosols and adverse aerosol health effects. This study investigated the effects of nitrogen oxides (NO_x) during photooxidation of α-pinene and naphthalene on the EPFR content and ROS formation from secondary organic aerosols (SOA). Electron paramagnetic resonance (EPR) spectroscopy was applied to quantify EPFR content and ROS formation. While no EPFR were detected in α-pinene SOA, we found that naphthalene SOA contained about 0.7 pmol μg^-1 of EPFR, and NO_x has little influence on EPFR concentrations and oxidative potential. α-Pinene and naphthalene SOA generated under low NO_x conditions form OH radicals and superoxide in the aqueous phase, which was lowered substantially by 50-80% for SOA generated under high NO_x conditions. High-resolution mass spectrometry analysis showed the substantial formation of nitroaromatics and organic nitrates in a high NO_x environment. The modeling results using the GECKO-A model that simulates explicit gas-phase chemistry and the radical 2D-VBS model that treats autoxidation predicted reduced formation of hydroperoxides and enhanced formation of organic nitrates under high NO_x due to the reactions of peroxy radicals with NO_x instead of their reactions with HO₂. Consistently, the presence of NO_x resulted in the decrease of peroxide contents and oxidative potential of α-pinene SOA.

The effects of biochar and its applications in the microbial remediation of contaminated soil: A review

The amendment of biochar for soil bioremediation can improve soil conditions, influence soil microbial community, and achieve co-application of biochar-microbe to promote the removal of pollutants. This paper summarizes the positive effects of biochar on microorganisms, including acting as a shelter, providing nutrients, and improving soil conditions (soil aggregation, pH, cation exchange capacity (CEC), and enzymatic activity). These effects will cause variations in microbial abundance, activity, and community structure. Biochar can act as an electron mediator to promote electron transfer in the process of microbial degradation. And the application of biochar in soil bioremediation is also introduced. Nevertheless, toxic substances carried by biochar that may threaten microbial community shouldn't be overlooked. With this review, we can better understand biochar's involvement in soil bioremediation, which will help us choose and modify biochar in a targeted manner for the desired purpose in practical applications.

Role of persistent free radicals and lewis acid sites in visible-light-driven wet peroxide activation by solid acid biochar catalysts - A mechanistic study

We report the synthesis of H₂SO₄-modified biochars (SBCs) as solid-acid catalysts to activate H₂O₂ at circumneutral pH under visible light radiation. Spent coffee grinds were pyrolyzed with TiO₂ at 300, 500 and 600 °C followed by steeping in 5 M H₂SO₄ and were used for the Fenton-like degradation of methyl orange (MO). The catalytic activity of SBC depended on the pyrolysis temperature and correlated well with the surface acidity and persistent free radical (PFR) concentration. Results showed that a complete MO removal and a TOC reduction of 70.2% can be achieved with SBC500 under photo-Fenton conditions. However, poisoning of the Lewis acid sites on SBC by PO₄^3- led to a dramatic decrease in the removal of MO with inhibition effects more pronounced than with radical scavengers, suggesting the key role played by acid-sites on the activation of H₂O₂. Finally, electron paramagnetic resonance (EPR) studies identified •OH as the key transient in the degradation followed by •O₂^- and ¹O₂. These findings suggest that H₂O₂ was likely adsorbed on the surface oxygenated functional groups before being decomposed by accepting electrons from the PFRs on the SBC surface.

Distribution, influence factors, and biotoxicity of environmentally persistent free radical in soil at a typical coking plant

Environmentally persistent free radicals (EPFRs) are emerging pollutants in contaminated soils and have attracted significant attention. Chinese coke production making a great contribution to the globe is increasingly identified as the non-ignorable source of EPFRs. However, the distribution level, influence factors, and biotoxicity of EPFRs at coking sites remain poorly understood. Herein, a typical coking plant in Tangshan, China, featuring two functional regions (the reconstructed project (RP) and elimination engineering (EE)) was used to study the existence of EPFRs. The spin density of the EPFRs in coking soils was 3.20 × 10²⁰-3.11 × 10²¹ spins/g with g-factor values of 2.0020-2.0036. The EPFRs presented higher concentrations and g-factor values in RP region than in EE region, and a mixture of carbon-centered radicals and carbon-centered radicals with adjacent oxygen atoms as well as carbon-centered radical was ascertained in the former and the latter, respectively. Correlation analysis and FT-ICR-MS results indicated that polycyclic aromatic hydrocarbons (PAH) together with other unsaturated hydrocarbons and condensed aromatic contaminants, might contribute to the EPFRs formation in the soils of RP region, whereas PAHs were the main source of EPFRs in EE region. Soil components were determined to investigate the influence factors in EPFRs formation. Cu and Fe₂O₃ were recognized as the markedly positive influence factors, while TOC had a negative impact on EPFR formation. Visible light irradiation can induce the transformation and generation of EPFRs. As representative contaminants, both toluene and 2-chlorophenol can create EPFRs in coking soil under visible light irradiation. The potential biotoxicity tests of Photobacterium phosphoreum T3 spp. showed that EPFRs from the soils diminished bacterial luminescence. Such effect was proven to be induced by the OH based on the quenching experiment. Understanding the influence factors of EPFRs formation and their biotoxicity in coking soils is critical for developing risk assessments and prevention strategies.

A Novel Low-Cost Bio-Sorbent Prepared from Crisp Persimmon Peel by Low-Temperature Pyrolysis for Adsorption of Organic Dyes

In order to properly reuse food waste and remove various contaminants from wastewater, the development of green, sustainable and clean technologies has demonstrated potential in the efficient inhibition of secondary pollution to the environment. In this study, an economical and green method was used to prepare biochar from crisp persimmon peel (CPP) using flash-vacuum pyrolysis at different temperatures (200–700 °C; referred to as CPP200–CPP700). CPP200 has high polarity, low aromaticity and high oxygen-containing functional groups that exhibit superior MB adsorption capabilities. CPP200 that was prepared at a relatively low temperature of 200 °C exhibited a high adsorption capacity of 59.72 mg/g toward methylene blue (MB), which was relatively higher than that for alizarin yellow R (4.05 mg/g) and neutral red (39.08 mg/g), indicating that CPP200 possesses a higher adsorption selectivity for cationic dyes. Kinetics investigation revealed that the kinetic data of CPP200 for the adsorption of MB was better fitted by a linear pseudo-second-order model. Isothermal studies indicated that the linear Langmuir model was more suitable for describing the adsorption process. The adsorption thermodynamics illustrated that the adsorption of MB onto CPP200 was spontaneous and endothermic. EDS and IR analyses of CPP200 for both pre- and post-adsorption of MB showed that electrostatic interactions between oxygen-containing groups on biochar and target MB dominated the adsorption procedure, in addition to hydrogen bonding interactions. Reusability tests confirmed the excellent regeneration characteristics of CPP200, indicating that CPP200 may be used as a green, sustainable, highly efficient and recyclable adsorbent for the selective removal of cationic organic dyes.

Insight into biomass feedstock on formation of biochar-bound environmentally persistent free radicals under different pyrolysis temperatures

Environmentally persistent free radicals (EPFRs) in biochars have the ability of catalytic formation of reactive oxygen species, which may pose potential oxidative stresses to eco-environment and human health. Therefore, comprehending the formation and characteristics of EPFRs in biochars is important for their further applications. In this study, the woody lignocellulosic biomass (wood chips, pine needle and barks), non-woody lignocellulosic biomass (rice husk, corn stover, and duckweed), and non-lignocellulosic biomass (anaerobically digested sludge) were selected as biomass feedstock to prepare biochars under different pyrolysis temperatures (200–700 °C). The impact of biomass feedstock on formation of biochar-bound EPFRs was systematically compared. Elemental compositions and atomic ratios of H/C and O/C varied greatly among different biomass feedstocks and the subsequently resulting biochars. EPFRs in biochars derived from the studied lignocellulosic biomass have similar levels of spin concentrations (10¹⁸–10¹⁹ spins per g) except for lower EPFRs in biochars under 200 and 700 °C; however, sludge-based biochars, a typical non-lignocellulosic-biomass-based biochar, have much lower EPFRs (10¹⁶ spins per g) than lignocellulosic-biomass-based biochars under all the studied pyrolysis temperatures. Values of g factors ranged from 2.0025 to 2.0042 and line width was in the range of 2.15–11.3 for EPFRs in the resulting biochars. Spin concentrations of biochar-bound EPFRs increased with the increasing pyrolysis temperatures from 200 to 500 °C, and then decreased rapidly from 500 to 700 °C and oxygen-centered radicals shifted to carbon-centered radicals with the increasing pyrolysis temperatures from 200 to 700 °C for all the studied biomass feedstock. 300–500 °C was the appropriate pyrolysis temperature range for higher levels of spin concentrations of biochar-bound EPFRs. Moreover, EPFRs' concentrations had significantly positive correlation with C contents and weak or none correlation with contents of transition metals. Overall, different types of biomass feedstock have significant impact on the formation of EPFRs in the resulting biochars.

Environmentally persistent free radicals (EPFRs) in biochars have the ability of catalytic formation of reactive oxygen species, which may pose potential oxidative stresses to eco-environment and human health.

Sinapicacid Inhibits Group IIA Secretory Phospholipase A2 and Its Inflammatory Response in Mice

Human Group IIA secreted phospholipase A₂ (sPLA₂-IIA) enzyme plays a crucial role in several chronic inflammatory diseases such asasthma, atherosclerosis, gout, bronchitis, etc. Several studies showed that the antioxidants exert an anti-inflammatory function by inhibiting the sPLA₂-IIA enzyme. Hence, the present study evaluated an antioxidant molecule, sinapic acid, for sPLA₂-IIA inhibition as an anti-inflammatory function. Initially, the antioxidant efficacy of sinapic acid was evaluated, and it showed greater antioxidant potency. Further, sinapic acid inhibited 94.4 ± 4.83% of sPLA₂-IIA activity with an IC₅₀ value of 4.16 ± 0.13 µM. The mode of sPLA₂-IIA inhibition was examined by increasing the substrate concentration from 30 to 120nM and the calcium concentration from 2.5 to 15 mM, which did not change the level of inhibition. Further, sinapic acid altered the intrinsic fluorescence and distorted the far UltraViolet Circular Dichroism (UV-CD) spectra of the sPLA₂-IIA, indicating the direct enzyme-inhibitor interaction. Sinapic acid reduced the sPLA₂-IIA mediated hemolytic activity from 94 ± 2.19% to 12.35 ± 2.57% and mouse paw edema from 171.75 ± 2.2% to 114.8 ± 1.98%, demonstrating the anti-inflammatory efficiency of sinapic acid by in situ and in vivo methods, respectively. Finally, sinapic acid reduced the hemorrhagic effect of Vipera russelli venom hemorrhagic complex-I (VR-HC-I) as an anti-hemorrhagic function. Thus, the above experimental results revealed the sinapic acid potency to be an antioxidant, anti-inflammatory and anti-hemorrhagic molecule, and therefore, it appears to be a promising therapeutic agent.

Recent advances in waste-derived functional materials for wastewater remediation

Water pollution is a major concern for public health and a sustainable future. It is urgent to purify wastewater with effective methods to ensure a clean water supply. Most wastewater remediation techniques rely heavily on functional materials, and cost-effective materials are thus highly favorable. Of great environmental and economic significance, developing waste-derived materials for wastewater remediation has undergone explosive growth recently. Herein, the applications of waste (e.g., biowastes, electronic wastes, and industrial wastes)-derived materials for wastewater purification are comprehensively reviewed. Sophisticated strategies for turning wastes into functional materials are firstly summarized, including pyrolysis and combustion, hydrothermal synthesis, sol-gel method, co-precipitation, and ball milling. Moreover, critical experimental parameters within different design strategies are discussed. Afterward, recent applications of waste-derived functional materials in adsorption, photocatalytic degradation, electrochemical treatment, and advanced oxidation processes (AOPs) are analyzed. We mainly focus on the development of efficient functional materials via regulating the internal and external characteristics of waste-derived materials, and the material's property-performance correlation is also emphasized. Finally, the key future perspectives in the field of waste-derived materials-driven water remediation are highlighted.