Dynamics of PCB removal and detoxification in historically contaminated soils amended with activated carbon

The bioremediation of the typical persistent organic pollutants (POPs) by microalgae-bacteria consortia: A systematic review

With industrialisation and the rapidly growing agricultural demand, many organic compounds have been leaked into the environment, causing serious damage to the biosphere. Persistent organic pollutants (POPs) are a type of toxic chemicals that are resistant to degradation through normal chemical, biological or photolytic approaches. With their stable chemical structures, POPs can be accumulated in the environment, and transported through wind and water, causing global environmental issues. Many researches have been conducted to remediate POPs contamination using various kinds of biological methods, and significant results have been seen. Microalgae-bacteria consortium is a newly developed concept for biological technology in contamination treatment, with the synergetic effects between microalgae and bacteria, their potential for pollutants degradation can be further released. In this review, two types of POPs (polychlorinated biphenyls and polycyclic aromatic hydrocarbons) are selected as the targeted pollutants to give a systematic analysis of the biodegradation through microalgae and bacteria, including the species selection, the identification of dominant enzymes, as well as the real application performance of the consortia. In the end, some outlooks and suggestions are given to further guide the development of applying microalgae-bacteria consortia in remediating POPs contamination. In general, the coculturing of microalgae and bacteria is a novel and efficient way to fulfil the advanced treatment of POPs in soil or liquid phase, and both monooxygenase and dioxygenase belonging to oxygenase play a vital role in the biodegradation of PCBs and PAHs. This review provides a general guide in the future investigation of biological treatment of POPs.

Comparing biochar and hydrochar for reducing the risk of organic contaminants in polluted river sediments used for growing energy crops

In Europe alone, >200 million m³ of river sediments are dredged each year, part of which are contaminated to such an extent that they have to be landfilled. This study compares the use of biochar and hydrochar for the remediation of sediment contaminated with pentachlorobenzene, hexachlorobenzene, lindane, trifluralin, alachlor, simazine, and atrazine with the motivation to make sediments contaminated by such priority substances usable as arable land for growing energy crops. Biochar and hydrochar originating from Miscanthus giganteus and Beta vulgaris shreds were compared for their potential to reduce contaminant associated risk in sediments. Specifically, by investigating the effects of sorbent amendment rate (1, 5, and 10 %) and incubation time (14, 30, and 180 d) on contaminant bioaccessibility, toxicity to the bacteria Vibrio fischeri, as well as toxicity and plant uptake in Zea mays. Biochar reduced contaminant bioaccessibility up to five times more than hydrochar. The bioaccessibility of contaminants decreased up to sevenfold with increasing incubation time, indicating that the performance of carbonaceous sorbents may be underestimated in short-term lab experiments. Biochar reduced contaminants toxicity to Vibrio fischeri, whereas hydrochar was itself toxic to the bacteria. Toxicity to Zea mays was determined by contaminant bioaccessibility but also sorbent feedstock with cellulose rich Beta vulgaris based sorbents exhibiting toxic effects. The plant uptake of all contaminants decreased after sorbent amendment.

Organochlorine POPs sequestration strategy by carbonaceous amendments of contaminated soils: Toward a better understanding of the transfer reduction to laying hens

PCBs, PCDD/Fs, and Chlordecone (CLD) are POPs found in soils and transferred to animals through involuntary soil ingestion. In this frame, the amendment of contaminated soil with porous matrices, like Biochars (BCs) and Activated Carbons (ACs), is a promising technique for reducing this transfer. In this study, the efficiency of 3 biochars and 3 activated carbons was assessed by amending 2% (by weight) of these matrices on (i) CLD or (ii) PCBs and PCDD/Fs contaminated artificial soils. Porosity of the carbon-based materials and molecules physico-chemical characteristics were then linked to the obtained results. The concentrations of pollutants were then measured in the egg yolks of laying hens (n = 3), which were fed on a daily basis pellets containing 10% of soil for 20 days. Overall, no significant transfer reduction was observed with the biochar and the granular AC amendments for all the compounds. However, significant reductions were obtained with the two efficient activated carbons for PCDD/Fs and DL-PCB up to 79-82% (TEQ basis), whereas only a slight reduction of concentrations was obtained with these activated carbons for CLD and NDL-PCBs. Thus, (i) biochars were not proven efficient to reduce halogenated pollutants transfer to animals, (ii) powdered AC amendments resulted in reducing the bioavailability of soil POPs, and (iii) the effectiveness of such strategy depended on both characteristics of the matrix and of the pollutants.

A comparison of activated carbon remediation success in floodplain soils contaminated with DDT and its metabolites using ex situ and in situ experimentation

Remediation of hydrophobic organic contaminants using activated carbon is an effective means by which to clean up contaminated areas. Predicting remediation success using laboratory experimentation with soil, however, is unclear. Current remediation efforts involving activated carbon addition to floodplain soils downstream of the Velsicol Chemical Corporation Superfund Site (VCCSS) have offered the opportunity to directly compare in situ activated carbon remediation with laboratory experimentation. The objective of the current study was to compare bioaccumulation of DDT, DDD, and DDE (DDX) residues by earthworms (Eisenia fetida) exposed to laboratory-aged (LA) or field-aged (FA) soils from four locations. Samples were evaluated at 0-, 3-, and 9-months post-remediation to determine the ability of laboratory studies to predict in situ remediation. Floodplain soils downstream from the VCCSS were amended with 2% by weight activated carbon in the field and the laboratory, and then aged for 3- or 9-months. At 0-, 3-, and 9-months bioaccumulation assays were conducted with LA and FA soils and tissue concentrations were compared within study sites. In both LA and FA soils, activated carbon caused significant reductions (37.01-92.94%) in bioaccumulated DDX in earthworms. Field-collected worms showed a similar trend in reduction of bioaccumulated DDX, suggesting activated carbon remediation was successful in reducing bioavailable DDX for native organisms within the floodplain soils. The rate of reduction in bioavailable DDX, however, was significantly faster in LA soils (β = -0.189, p < 0.0001) compared to FA soils (β = -0.054, p < 0.0038). Differences in temperature and methods of activated carbon incorporation between LA and FA soils may account for the differences in remediation rate, suggesting laboratory experiments may overpredict the extent or speed in which remediation occurs in the field. Therefore, use of laboratory studies in predicting success of activated carbon remediation may be most effective when conditions mimic field remediation as closely as possible.

Sorption of benzo[a]pyrene by Chernozem and carbonaceous sorbents: comparison of kinetics and interaction mechanisms

Benzo[a]pyrene (BaP) is a polycyclic aromatic hydrocarbon, highly persistent and toxic and a widespread environmental pollutant. Although various technologies have been developed to remove BaP from the environment, its sorption through solid matrixes has received increasing attention due to cost-effectiveness. The present research compares the adsorption capacity of Haplic Chernozem, granular activated carbon and biochar in relation to BaP from water solution. Laboratory experiments with different initial BaP concentrations in the liquid phase and different ratios of the solid and liquid phases show that Freundlich model describes well the adsorption isotherms of BaP by the soil and both sorbents. Moreover, the BaP isotherm sorption by the Haplic Chernozem is better illustrated by the Freundlich model than the Langmuir equation. The results reveal that the sorption capacity of the carbonaceous adsorbents at a ratio 1:20 (solid to liquid phases) is orders of magnitude higher (13 368 ng mL^-1 of activated carbon and 3 578 ng mL^-1 of biochar) compared to the soil (57.8 ng mL^-1). At the ratio of 0.5:20, the adsorption capacity of the carbonaceous sorbents was 17-45 times higher than that of the soil. This is due to the higher pore volume and specific surface area of the carbonaceous sorbents than soil particles, assessed through scanning electron microscopy. The sorption kinetic of BaP by Chernozem was compared with the adsorption kinetics by the carbonaceous sorbents. Results indicate that the adsorption dynamic involves two steps. The first one is associated with a fast BaP adsorption on the large available surface and inside macro- and meso-pores of the sorbent particles of the granular activated carbon and biochar. Then, the adsorption is followed by a slower process of BaP penetration into the microporous space and/or redistribution into a hydrophobic fraction. The effectiveness of the sorption process depends on both the sorbent properties and the solvent competition. Overall, the granular activated carbon and biochar are highly effective adsorbents for BaP, whereas the Haplic Chernozem has a rather limited capacity to remove BaP from contaminated solutions.

Anaerobic bacterial responses to carbonaceous materials and implications for contaminant transformation: Cellular, metabolic, and community level findings

Carbonaceous materials (CM) enhance the abundance and activity of bacteria capable of persistent organic (micro)pollutant (POP) degradation. This review synthesizes anaerobic bacterial responses to minimally modified CM in non-fuel cell bioremediation applications at three stages: attachment, metabolism, and biofilm genetic composition. Established relationships between biological behavior and CM surface properties are identified, but temporal relationships are not well understood, making it difficult to connect substratum properties and "pioneer" bacteria with mature microorganism-CM systems. Stark differences in laboratory methodology at each temporal stage results in observational, but not causative, linkages as system complexity increases. This review is the first to critically examine relationships between material and cellular properties with respect to time. The work highlights critical knowledge gaps that must be addressed to accurately predict microorganism-CM behavior and to tailor CM properties for optimized microbial activity, critical frontiers in establishing this approach as an effective bioremediation strategy.

Contribution of phenanthrene in different binding sites to its biodegradation in biochar-amended soils

Biochars can strongly sorb hydrophobic organic contaminants in soils. However, contribution of contaminants in different binding sites to their biodegradation in biochar-amended soils is not clear. In this work, wheat straw biochars were prepared at pyrolysis temperatures of 400 °C (BC400) and 700 °C (BC700). During a 42-day experiment, degradation rate constant of phenanthrene in soils was in the order of treatment without biochar (1.64 × 10-2 d-1) > treatment with BC700 (0.96 × 10-2 d-1) > treatment with BC400 (0.30 × 10-2 d-1). At the beginning, amendment of BC400 and BC700 reduced the rapidly desorbing fraction of phenanthrene in soils by 44.8% and 92.5%, respectively. At the end, both phenanthrene and microbial biomass highly concentrated on the biochar separated from soils. The results of a coupled model of desorption and biodegradation revealed that only phenanthrene in rapidly desorbing sites was degraded in BC400-amended soils, whereas degradation of phenanthrene in both rapidly and slowly desorbing sites occurred in BC700-amended soils, contributing 24.4% and 75.6% of the degradation, respectively. High fraction (>95%) of biodegradable phenanthrene in slowly desorbing sites was the key reason for higher biodegradation rate of phenanthrene in soils with BC700 than in soils with BC400.

Adsorptive bioremediation of soil highly contaminated with crude oil

Due to the extended oil extraction and transportation in Russia and other oil-producing countries, many lands remain contaminated because of accidental spills. This situation requires the cost-effective and efficient remediation of petroleum-contaminated soils. Bioremediation of soils contaminated with high concentrations of crude oil is usually hampered by high toxicity thresholds for microbial degraders. We have performed a two-year microfield experiment on the influence of a mixed adsorbent (ACD) composed of granular activated carbon and diatomite on bioremediation of a grey forest soil contaminated with crude oil at concentrations (5-15 % w/w) that would theoretically not result in a successful pollutant removal due to toxicity. Remediation of these soils was evaluated after treating with the ACD adsorbent (from 4 to 12% w/w) and a biopreparation (BP) containing hydrocarbon-degrading bacteria, separately or in combination. Reduction of total petroleum hydrocarbons content was significantly greater in highly contaminated soils with the combined amendments than in the respective controls (through the activation of indigenous degrading microorganisms by fertilizing and mixing) by 9-10% and 5-8% at the end of the first and second years, respectively, depending on the contamination level. Significantly higher counts of petroleum-degrading microorganisms (as indigenous and introduced by the BP), as well as much less phytotoxicity was detected in the ACD-amended soils, as compared with the samples without adsorbent. In addition, the ACD mixture drastically reduced the wash-out of polar petroleum metabolites (evidently oxidized hydrocarbons) and the phytotoxicity of the lysimetric waters, especially in highly contaminated soils. The results indicate that the mixture of activated carbon and diatomite is a prospective adsorbent for the in situ bioremediation of soils highly contaminated with crude oil.

Lindane and hexachlorobenzene sequestration and detoxification in contaminated sediment amended with carbon-rich sorbents

Sediment represents a sink for toxic and persistent chemicals such as hexachlorobenzene (HCB) and lindane (γ-HCH). This paper investigates the possibility of reducing the risks associated with the presence of these pollutants in sediments by amending the sediment with carbon-rich materials (activated carbon (AC) and humus (HC)) to sequester the contaminants and render them biologically unavailable. The effects of the dose and contact time between the sediment and the carbon-rich amendments on the effectiveness of the detoxification are estimated. Four doses of carbon-rich amendments (0.5-10%) and four equilibration contact times (14-180 days) were investigated. Results have shown that the bioavailable fraction of γ-HCH and HCB decreased significantly in comparison to the unamended sediment. Regarding the AC amendments, almost 100% for both compounds; and for HC amendments around 95% for γ-HCH, and 75% for HCB. Aging caused further reductions in the bioavailable fraction, compared to the untreated sediment. Phytotoxicity tests showed that Zea mays accumulated significantly higher amount of γ-HCH and HCB from unamended sediment, comparing to Cucurbita pepo and Lactuca sativa. Toxicity of HC and AC amended sediment assessed by Vibrio fischeri luminescence inhibition test and by measuring Zea mays germination and biomass yield was significantly reduced in the amended sediment samples. γ-HCH and HCB accumulation in the Zea mays biomass in the unamended sediment were a significantly higher than in the all HC and AC amended sediment. Both sorbents show potential to be used as remediation agents for organically contaminated sediment, but AC exhibited the better performance.

Colonization and growth of dehalorespiring biofilms on carbonaceous sorptive amendments

Removal of polychlorinated biphenyls (PCBs) from contaminated sediments is a priority due to accumulation in the food chain. Recent success with reduction of PCB bioavailability due to adsorption onto activated carbon led to the recognition of in situ treatment as a remediation approach. In this study, reduced bioavailability and subsequent break-down of PCBs in dehalorespiring biofilms was investigated using Dehalobium chlorocoercia DF1. DF1 formed a patchy biofilm ranging in thickness from 3.9 to 6.7 µm (average 4.6 ± 0.87 µm), while the biofilm coverage varied from 5.5% (sand) to 20.2% (activated carbon), indicating a preference for sorptive materials. Quantification of DF1 biofilm bacteria showed 1.2-15.3 × 10⁹ bacteria per gram of material. After 22 days, coal activated carbon, bone biochar, polyoxymethylene, and sand microcosms had dechlorinated 73%, 93%, 100%, and 83%, respectively. These results show that a biofilm-based inoculum for bioaugmentation of PCBs in sediment can be an efficient approach.

Effects of biochar on phytotoxicity and translocation of polybrominated diphenyl ethers in Ni/Fe bimetallic nanoparticle-treated soil

In this study, soil culture experiments were conducted to explore the effects of biochar-supported Ni/Fe nanoparticles on the accumulation and translocation of polybrominated diphenyl ethers (PBDEs) in soil-plant system and its phytotoxicity to Brassica chinensis. Compared with those in BDE209 contaminated soils (S ₁) and Ni/Fe nanoparticle-treated soil (S ₃), the plant biomass, root, and shoot lengths in biochar-supported Ni/Fe nanoparticle-treated soil (S ₄) were increased by 23 mg, 1.35 cm, and 2.08 cm and 27.2 mg, 1.75 cm, and 2.52 cm, respectively, suggesting that the phytotoxicity in S ₄ treatment was significantly decreased. Moreover, in all treatments, the contents of BDE209, the total PBDEs, Ni, and Fe in sample plant tissues of S ₄ were the lowest. In addition, the superoxide dismutase, peroxidase, and catalase activities in S ₄ treatment were found to decrease by 33.8, 47.2, and 24.1%, respectively, compared to those in S ₃. Results also showed that biochar addition not only reduced the uptake of PBDEs and heavy metals but also effectively improve soil fertility and reduce the leachability of Ni and Fe caused by Ni/Fe. Finally, the translocation factors (TFs) of PBDEs in four treatments followed the orders as S ₁ > S ₃ > S ₄ > S ₂, indicating that biochar has an inhibition effects on PBDE translocation in the plants. In summary, all of the results suggested that the phytotoxicity, translocation of PBDEs, and the negative effects caused by neat Ni/Fe nanoparticles in B. chinensis were decreased as a result of the effects of the biochar.

Effect of addition of sewage sludge and coal sludge on bioavailability of selected metals in the waste from the zinc and lead industry

This study evaluated the content of bioavailable forms of selected heavy metals present in the waste from Zn and Pb processing that can potentially have an effect on the observed difficulties in reclamation of landfills with this waste. The particular focus of the study was on iron because its potential excess or deficiency may be one of the causes of the failure in biological reclamation. The study confirmed that despite high content of total iron in waste (mean value of 200.975gkg^-1), this metal is present in the forms not available to plants (mean: 0.00009gkg^-1). The study attempted to increase its potential bioavailability through preparation of the mixtures of this waste with additions in the form of sewage sludge and coal sludge in different proportions. Combination of waste with 10% of coal sludge and sewage sludge using the contents of 10%, 20% and 30% increased the amounts of bioavailable iron forms to the level defined as sufficient for adequate plant growth. The Lepidum sativum test was used to evaluate phytotoxicity of waste and the mixtures prepared based on this waste. The results did not show unambiguously that the presence of heavy metals in the waste had a negative effect on the growth of test plant roots.

Mechanochemical remediation of PCB contaminated soil

Soil contaminated by polychlorinated biphenyls (PCBs) is a ubiquitous problem in the world, which can cause significant risks to human health and the environment. Mechanochemical destruction (MCD) has been recognized as a promising technology for the destruction of persistent organic pollutants (POPs) and other organic molecules in both solid waste and contaminated soil. However, few studies have been published about the application of MCD technology for the remediation of PCB contaminated soil. In the present study, the feasibility of destroying PCBs in contaminated soil by co-grinding with and without additives in a planetary ball mill was investigated. After 4 h milling time, more than 96% of PCBs in contaminated soil samples were destroyed. The residual concentrations of PCBs decreased from 1000 mg/kg to below the provisional Basel Convention limit of less than 50 mg/kg. PCDD/F present in the original soil at levels of 4200 ng TEQ/kg was also destroyed with even a slightly higher destruction efficiency. Only minor dechlorinations of the PCBs were observed and the destruction of the hydrocarbon skeleton is proposed as the main degradation pathway of PCBs.

Removal of 2-ClBP from soil-water system using activated carbon supported nanoscale zerovalent iron

We explored the feasibility and removal mechanism of removing 2-chlorobiphenyl (2-ClBP) from soil-water system using granular activated carbon (GAC) impregnated with nanoscale zerovalent iron (reactive activated carbon or RAC). The RAC samples were successfully synthesized by the liquid precipitation method. The mesoporous GAC based RAC with low iron content (1.32%) exhibited higher 2-ClBP removal efficiency (54.6%) in the water phase. The result of Langmuir-Hinshelwood kinetic model implied that the different molecular structures between 2-ClBP and trichloroethylene (TCE) resulted in more difference in dechlorination reaction rates on RAC than adsorption capacities. Compared to removing 2-ClBP in the water phase, RAC removed the 2-ClBP more slowly in the soil phase due to the significant external mass transfer resistance. However, in the soil phase, a better removal capacity of RAC was observed than its base GAC because the chemical dechlorination played a more important role in total removal process for 2-ClBP. This important result verified the effectiveness of RAC for removing 2-ClBP in the soil phase. Although reducing the total RAC removal rate of 2-ClBP, soil organic matter (SOM), especially the soft carbon, also served as an electron transfer medium to promote the dechlorination of 2-ClBP in the long term.

Measuring and Modeling Organochlorine Pesticide Response to Activated Carbon Amendment in Tidal Sediment Mesocosms

Activated carbon (AC) sediment amendment for hydrophobic organic contaminants (HOCs) is attracting increasing regulatory and industrial interest. However, mechanistic and well-vetted models are needed. Here, we conduct an 18 month field mesocosm trial at a site containing dichlorodiphenyltrichloroethane (DDT) and chlordane. Different AC applications were applied and, for the first time, a recently published mass transfer model was field tested under varying experimental conditions. AC treatment was effective in reducing DDT and chlordane concentration in polyethylene (PE) samplers, and contaminant extractability by Arenicola brasiliensis digestive fluids. A substantial AC particle size effect was observed. For example, chlordane concentration in PE was reduced by 93% 6 months post-treatment in the powdered AC (PAC) mesocosm, compared with 71% in the granular AC (GAC) mesocosm. Extractability of sediment-associated DDT and chlordane by A. brasiliensis digestive fluids was reduced by at least a factor of 10 in all AC treatments. The model reproduced the relative effects of varying experimental conditions (particle size, dose, mixing time) on concentrations in polyethylene passive samplers well, in most cases within 25% of experimental observations. Although uncertainties such as the effect of long-term AC fouling by organic matter remain, the study findings support the use of the model to assess long-term implications of AC amendment.

A critical evaluation of magnetic activated carbon's potential for the remediation of sediment impacted by polycyclic aromatic hydrocarbons

Addition of activated carbon (AC) or biochar (BC) to sediment to reduce the chemical and biological availability of organic contaminants is a promising in-situ remediation technology. But concerns about leaving the adsorbed pollutants in place motivate research into sorbent recovery methods. This study explores the use of magnetic sorbents. A coal-based magnetic activated carbon (MAC) was identified as the strongest of four AC and BC derived magnetic sorbents for polycyclic aromatic hydrocarbons (PAHs) remediation. An 8.1% MAC amendment (w/w, equal to 5% AC content) was found to be as effective as 5% (w/w) pristine AC in reducing aqueous PAHs within three months by 98%. MAC recovery from sediment after three months was 77%, and incomplete MAC recovery had both, positive and negative effects. A slight rebound of aqueous PAH concentrations was observed following the MAC recovery, but aqueous PAH concentrations then dropped again after six months, likely due to the presence of the 23% unrecovered MAC. On the other hand, the 77% recovery of the 8.1% MAC dose was insufficient to reduce ecotoxic effects of fine grained AC or MAC amendment on the egestion rate, growth and reproduction of the AC sensitive species Lumbriculus variegatus.

Treatment of a suspension of PCB contaminated soil using iron nanoparticles and electric current

Contaminated soils and sediments with polychlorinated biphenyls (PCB) are an important environmental problem due to the persistence of these synthetic aromatic compounds and to the lack of a cost-effective and sustainable remediation technology. Recently, a new experimental setup has been proposed using electrodialytic remediation and iron nanoparticles. The current work compares the performance of this new setup (A) with conventional electrokinetics (setup B). An historically contaminated soil with an initial PCB concentration of 258 μg kg(-1) was treated during 5, 10, 20 and 45 d using different amounts of iron nanoparticles in both setups A and B. A PCB removal of 83% was obtained in setup A compared with 58% of setup B. Setup A also showed additional advantages, such as a higher PCB dechlorination, in a shorter time, with lower nZVI consumption, and with the use of half of the voltage gradient when compared with the traditional setup (B). Energy and nZVI costs for a full-scale reactor are estimated at 72 € for each cubic meter of PCB contaminated soil treated on-site, making this technology competitive when compared with average off-site incineration (885 € m(-3)) or landfilling (231 € m(-3)) cost in Europe and in the USA (327 USD m(-3)).

The impact of biochars on sorption and biodegradation of polycyclic aromatic hydrocarbons in soils--a review

Amending polycyclic aromatic hydrocarbon (PAH)-contaminated soils with biochar may be cheaper and environmentally friendly than other forms of organic materials. This has led to numerous studies on the use of biochar to either bind or stimulate the microbial degradation of organic compounds in soils. However, very little or no attention have been paid to the fact that biochars can give simultaneous impact on PAH fate processes, such as volatilization, sorption and biodegradation. In this review, we raised and considered the following questions: How does biochar affect microbes and microbial activities in the soil? What are the effects of adding biochar on sorption of PAHs? What are the effects of adding biochar on degradation of PAHs? What are the factors that we can manipulate in the laboratory to enhance the capability of biochars to degrade PAHs? A triphasic concept of how biochar can give simultaneous impact on PAH fate processes in soils was proposed, which involves rapid PAH sorption into biochar, subsequent desorption and modification of soil physicochemical properties by biochar, which in turn stimulates microbial degradation of the desorbed PAHs. It is anticipated that biochar can give simultaneous impact on PAH fate processes in soils.

Remediation of polychlorinated biphenyl-contaminated soil by using a combination of ryegrass, arbuscular mycorrhizal fungi and earthworms

In this work, a laboratory experiment was performed to investigate the influences of inoculation with the arbuscular mycorrhizal fungus (AMF) Glomus caledoniun L. and/or epigeic earthworms (Eisenia foetida) on phytoremediation of a PCB-contaminated soil by ryegrass grown for 180d. Planting ryegrass, ryegrass inoculated with earthworms, ryegrass inoculated with AMF, and ryegrass co-inoculated with AMF and earthworms decreased significantly initial soil PCB contents by 58.4%, 62.6%, 74.3%, and 79.5%, respectively. Inoculation with AMF and/or earthworms increased the yield of plants, and the accumulation of PCBs in ryegrass. However, PCB uptake by ryegrass accounted for a negligible portion of soil PCB removal. The number of soil PCB-degrading populations increased when ryegrass was inoculated with AMF and/or earthworms. The data show that fungal inoculation may significantly increase the remedial potential of ryegrass for soil contaminated with PCBs.

Assessment and optimization of an ultrasound-assisted washing process using organic solvents for polychlorinated biphenyl-contaminated soil

The goal of this work was to evaluate a washing process that uses organic solutions for polychlorinated biphenyl (PCB)-contaminated soil, and includes an ultrasound pre-treatment step to reduce operational times and organic solvent losses. In a preliminary trial, the suitability of 10 washing solutions of different polarities were tested, from which three n-hexane-based solutions were selected for further evaluation. A second set of experiments was designed using a three-level Taguchi L27 orthogonal array to model the desorption processes of seven different PCB congeners in terms of the variability of their PCB concentration levels, polarity of the washing solution, sonication time, the ratio washing solution/soil, number of extraction steps and total washing time. Linear models were developed for the desorption processes of all congeners. These models provide a good fit with the results obtained. Moreover, statistically significant outcomes were achieved from the analysis of variance tests carried out. It was determined that sonication time and ratio of washing solution/soil were the most influential process parameters. For this reason they were studied in a third set of experiments, constructed as a full factorial design. The process was eventually optimized, achieving desorption rates of more than 90% for all congeners, thus obtaining concentrations lower than 5 ppb in all cases. The use of an ultrasound-assisted soil washing process for PCB-contaminated soils that uses organic solvents seems therefore to be a viable option, especially with the incorporation of an extra step in the sonication process relating to temperature control, which is intended to prevent the loss of the lighter congeners.

Biological responses to activated carbon amendments in sediment remediation

Sorbent amendment with activated carbon (AC) is a novel in situ management strategy for addressing human and ecological health risks posed by hydrophobic organic chemicals (HOCs) in sediments and soils. A large body of literature shows that AC amendments can reduce bioavailability of sediment-associated HOCs by more than 60-90%. Empirically derived biodynamic models can predict bioaccumulation in benthic invertebrates within a factor of 2, allowing for future scenarios under AC amendment to be estimated. Higher AC dose and smaller AC particle size further reduce bioaccumulation of HOCs but may induce stress in some organisms. Adverse ecotoxicity response to AC exposure was observed in one-fifth of 82 tests, including changes in growth, lipid content, behavior, and survival. Negative effects on individual species and benthic communities appear to depend on the characteristics of the sedimentary environment and the AC amendment strategy (e.g., dose and particle size). More research is needed to evaluate reproductive end points, bacterial communities, and plants, and to link species- and community-level responses to amendment. In general, the ability of AC to effectively limit the mobility of HOCs in aquatic environments may outshine potential negative secondary effects, and these outcomes must be held in comparison to traditional remediation approaches.

Observations of limited secondary effects to benthic invertebrates and macrophytes with activated carbon amendment in river sediments

Amendment of activated carbon to sediments has been shown to effectively reduce the bioavailability of hydrophobic organic contaminants, but concerns have been raised about the potential toxicological impacts of administering a strong sorbent into sediments. The present study provides a summary of several investigations carried out as part of a pilot-scale study in a river to understand the secondary effects of activated carbon added to reduce the bioavailability of sediment-associated polychlorinated biphenyls. While some previous laboratory amendment studies have found reduced lipid content in freshwater worms exposed to activated carbon-treated sediments, the authors did not observe an impact with fine-granular activated carbon-amended sediments aged in the field. Benthic community studies did not find differences between control and activated carbon-treated field sites over 3 yr of postapplication monitoring. Laboratory studies with submerged aquatic plants indicated reduced growth in sediments amended with ≥5% activated carbon, which was attributed to volume dilution of nutritional sediment or bulk density changes and was also observed when the sediment was amended with biochar and inert perlite. Since in situ sorbent amendment is likely to be implemented in depositional sediment environments, potential negative impacts will likely be short-term if the treated site is slowly covered with new sediment over time. Overall suitability of activated carbon amendment for a site will depend on balancing ecosystem and human health benefits from contaminant bioavailability reduction with any potential negative impacts expected under field conditions.

Reducing the bioavailability of PCBs in soil to plant by biochars assessed with triolein-embedded cellulose acetate membrane technique

Coupling with triolein-embedded cellulose acetate membrane (TECAM) technique, hydroxypropyl β-cyclodextrins (HPCD) extraction method, and the greenhouse pot experiments, the influences of biochars on polychlorinated biphenyls (PCBs) bioavailability in soil to plant (Brassica chinensis L. and Daucus carota) were investigated. Addition of 2% biochars to soils significantly reduced the uptake of PCBs in plant, especially for di-, tri- and tetra-chlorobiphenyls. PCBs concentrations in the roots of B. chinensis and D. carota were reduced for 61.5-93.7%, and 12.7-62.4%, respectively in the presence of biochars. The kinetic study showed that in the soils amended with/without biochars, PCBs concentrations accumulated in TECAM, as well as in the HPCD extraction solution, followed significant linear relationships with those in plant roots. Application of biochars to soil is a potentially promising method to reduce PCBs bioavailability whereas TECAM technique can be a useful tool to predict the bioavailability of PCBs in soil.

Overview of in situ and ex situ remediation technologies for PCB-contaminated soils and sediments and obstacles for full-scale application

Polychlorinated biphenyls (PCB) are persistent organic pollutants used worldwide between the 1930s and 1980s. Although their use has been heavily restricted, PCB can be found in contaminated soils and sediments. The most frequent remediation solutions adopted are "dig and dump" and "dig and incinerate", but there are currently new methods that could be more sustainable alternatives. This paper takes a look into the remediation options available for PCB-contaminated soils and sediments, differentiating between biological, chemical, physical and thermal methods. The use of combined technologies was also reviewed. Most of them are still in an initial development stage and further research in different implementation issues is needed. There is no single technology that is the solution for PCB contamination problem. The successful remediation of a site will depend on proper selection, design and adjustment of the technology or combined technologies to the site characteristics.

Comparing the desorption and biodegradation of low concentrations of phenanthrene sorbed to activated carbon, biochar and compost

Carbonaceous soil amendments are applied to contaminated soils and sediments to strongly sorb hydrophobic organic contaminants (HOCs) and reduce their freely dissolved concentrations. This limits biouptake and toxicity, but also biodegradation. To investigate whether HOCs sorbed to such amendments can be degraded at all, the desorption and biodegradation of low concentrations of (14)C-labelled phenanthrene (≤5 μg L(-1)) freshly sorbed to suspensions of the pure soil amendments activated carbon (AC), biochar (charcoal) and compost were compared. Firstly, the maximum abiotic desorption of phenanthrene from soil amendment suspensions in water, minimal salts medium (MSM) or tryptic soy broth (TSB) into a dominating silicone sink were measured. Highest fractions remained sorbed to AC (84±2.3%, 87±4.1%, and 53±1.2% for water, MSM and TSB, respectively), followed by charcoal (35±2.2%, 32±1.7%, and 12±0.3%, respectively) and compost (1.3±0.21%, similar for all media). Secondly, the mineralization of phenanthrene sorbed to AC, charcoal and compost by Sphingomonas sp. 10-1 (DSM 12247) was determined. In contrast to the amounts desorbed, phenanthrene mineralization was similar for all the soil amendments at about 56±11% of the initially applied radioactivity. Furthermore, HPLC analyses showed only minor amounts (<5%) of residual phenanthrene remaining in the suspensions, indicating almost complete biodegradation. Fitting the data to a coupled desorption and biodegradation model revealed that desorption did not limit biodegradation for any of the amendments, and that degradation could proceed due to the high numbers of bacteria and/or the production of biosurfactants or biofilms. Therefore, reduced desorption of phenanthrene from AC or charcoal did not inhibit its biodegradation, which implies that under the experimental conditions these amendments can reduce freely dissolved concentration without hindering biodegradation. In contrast, phenanthrene sorbed to compost was fully desorbed and biodegraded.

Influence of activated charcoal on desorption kinetics and biodegradation of phenanthrene in soil

The observed strong sorption of polycyclic aromatic hydrocarbons (PAHs) to black carbon (BC) presents potential implications for PAH bioaccessibility in soils. The effects of BC on the desorption kinetics and mineralization of phenanthrene in four soils was investigated after 1, 25, 50, and 100 d soil-PAH contact time, using sequential hydroxypropyl-β-cyclodextrin (HPCD) extractions in soils amended with 0, 0.1, 1, and 5% (dry wt. soil) activated charcoal (AC, a form of BC). The rapidly (%F(rap)) and slowly (%F(slow)) desorbing phenanthrene fractions and their rate constants were determined using a first-order two-compartment (biphasic) desorption model. A minimum 7.8-fold decrease in %F(rap) occurred when AC was increased from 0 to 5%, with a corresponding increase in %F(slow). Desorption rate constants followed the progression k(rap) (% h(-1)) > k(slow) (% h(-1)) and were in the order of 10(-1) to 10(-2) and 10(-3) to 10(-4), respectively. Linear regressions between %F(rap) and the fractions degraded by a phenanthrene-degrading inoculum (%F(min)) indicated that slopes did not approximate 1 at concentrations greater than 0% AC; %F(min) often exceeded %F(rap), indicating a fraction of sorbed phenanthrene (%F(slow)) remained microbially accessible. Therefore, HPCD-desorption kinetics alone may not be an adequate basis for the prediction of the bioaccessibility of PAHs to microorganisms or bioremediation potential in AC-amended soils.

Influence of activated carbon and biochar on phytotoxicity of air-dried sewage sludges to Lepidium sativum

The goal of the research was to determine the phytotoxicity (using Lepidium sativum) of two activated carbon/biochar-amended sewage sludges. Apart from the impact of the AC/biochar dose, the influence of biochar particle diameter (<300, 300-500 and >500 μm) and the influence of the contact time (7, 60, 90 days) between AC/biochar and sewage sludges on their phytotoxicity was also assessed. No negative impact of sewage sludges on seed germination was observed (P>0.05). The application of AC or biochar to the sludges positively affected root growth by reducing the harmful effect by 7.8 to 42% depending on the material used. Furthermore, the reduction range clearly depended on the type of sewage sludge. No differences were observed in the inhibition of the toxic effect between both biochar types used and the biochar particle size. The extension of the contact time between AC/biochar and sewage sludges had a negative impact on root growth.

Effect of activated carbon amendment on bacterial community structure and functions in a PAH impacted urban soil

We collected urban soil samples impacted by polycyclic aromatic hydrocarbons (PAHs) from a sorbent-based remediation field trial to address concerns about unwanted side-effects of 2% powdered (PAC) or granular (GAC) activated carbon amendment on soil microbiology and pollutant biodegradation. After three years, total microbial cell counts and respiration rates were highest in the GAC amended soil. The predominant bacterial community structure derived from denaturing gradient gel electrophoresis (DGGE) shifted more strongly with time than in response to AC amendment. DGGE band sequencing revealed the presence of taxa with closest affiliations either to known PAH degraders, e.g. Rhodococcus jostii RHA-1, or taxa known to harbor PAH degraders, e.g. Rhodococcus erythropolis, in all soils. Quantification by real-time polymerase chain reaction yielded similar dioxygenases gene copy numbers in unamended, PAC-, or GAC-amended soil. PAH availability assessments in batch tests showed the greatest difference of 75% with and without biocide addition for unamended soil, while the lowest PAH availability overall was measured in PAC-amended, live soil. We conclude that AC had no detrimental effects on soil microbiology, AC-amended soils retained the potential to biodegrade PAHs, but the removal of available pollutants by biodegradation was most notable in unamended soil.

Activated carbon amendment to sequester PAHs in contaminated soil: a lysimeter field trial

Activated carbon (AC) amendment is an innovative method for the in situ remediation of contaminated soils. A field-scale AC amendment of either 2% powder or granular AC (PAC and GAC) to a PAH contaminated soil was carried out in Norway. The PAH concentration in drainage water from the field plot was measured with a direct solvent extraction and by deploying polyoxymethylene (POM) passive samplers. In addition, POM samplers were dug directly in the AC amended and unamended soil in order to monitor the reduction in free aqueous PAH concentrations in the soil pore water. The total PAH concentration in the drainage water, measured by direct solvent extraction of the water, was reduced by 14% for the PAC amendment and by 59% for GAC, 12 months after amendment. Measurements carried out with POM showed a reduction of 93% for PAC and 56% for GAC. The free aqueous PAH concentration in soil pore water was reduced 93% and 76%, 17 and 28 months after PAC amendment, compared to 84% and 69% for GAC. PAC, in contrast to GAC, was more effective for reducing freely dissolved concentrations than total dissolved ones. This could tentatively be explained by leaching of microscopic AC particles from PAC. Secondary chemical effects of the AC amendment were monitored by considering concentration changes in dissolved organic carbon (DOC) and nutrients. DOC was bound by AC, while the concentrations of nutrients (NO(3), NO(2), NH(4), PO(4), P-total, K, Ca and Mg) were variable and likely affected by external environmental factors.

Effectiveness of activated carbon and biochar in reducing the availability of polychlorinated dibenzo-p-dioxins/dibenzofurans in soils

Five activated carbons (ACs) and two biochars were tested as amendments to reduce the availability of aged polychlorinated dibenzo-p-dioxin/dibenzofurans (PCDD/Fs) in two soils. All sorbents (ACs and biochars) tested substantially reduced the availability of PCDD/Fs measured by polyoxymethylene (POM) passive uptake and earthworm (E. fetida) biouptake. Seven sorbents amended at a level of 0.2 × soil total organic carbon (0.2X) reduced the passive uptake (physicochemical availability) of total PCDD/Fs in POM by 40% to 92% (or toxic equivalent by 48% to 99%). Sorbents with finer particle sizes or more macropores showed higher reduction efficiencies. The powdered regenerated AC and powdered coconut AC demonstrated to be the most effective and the two biochars also performed reasonably well especially in the powdered form. The passive uptake of PCDD/F in POM increased approximately 4 to 5 fold as the contact time between POM and soil slurry increased from 24 to 120 d while the efficacy of ACs in reducing the physicochemical availability remained unchanged. The reduction efficiencies measured by POM passive uptake for the regenerated AC were comparable to those measured by earthworm biouptake (bioavailability) at both dose levels of 0.2X and 0.5X. The biota-soil accumulation factor (BSAF) values for unamended soil ranged from 0.1 for tetra-CDD/F to 0.02 for octa-CDD/F. At both dose levels, the regenerated AC reduced the BSAFs to below 0.03 with the exception of two hexa-CDD/Fs. The reduction efficiencies measured by earthworm for coconut AC and corn stover biochar were generally less than those measured by POM probably due to larger particle sizes of these sorbents that could not be ingested by the worms.

Influence of activated carbon amendment on the accumulation and elimination of PCBs in the earthworm Eisenia fetida

In this study we investigated the use of activated carbon (AC) as a soil amendment for reducing bioavailability of polychlorinated biphenyls (PCBs) to the earthworm Eisenia fetida. Artificial soil was contaminated with PCBs and used in bioaccumulation experiments fresh or after aging for 19 months. PCB bioaccumulation in earthworms was reduced by 68% when AC was placed as a layer without mixing and by 94% when AC was manually mixed into the soil. Aging of the same AC mixed soil for 19 months resulted in an overall reduction of 99% in PCB biouptake. AC-treated aged soil also showed two orders of magnitude lower equilibrium aqueous concentrations of PCBs compared to untreated aged soils. The findings from this study indicate that application of engineered sorbents like AC to PCB impacted soils may greatly reduce PCB uptake at the base of the terrestrial food chain.

Effect of biochar on the fate of volatile petroleum hydrocarbons in an aerobic sandy soil

Biochar addition to soil is currently being investigated as a novel technology to remediate polluted sites. A critical consideration is the impact of biochar on the intrinsic microbial pollutant degradation, in particular at sites polluted with a mixture of readily biodegradable and more persistent organic pollutants. We therefore studied the impact of biochar (2% on dry weight basis) on the fate of volatile petroleum hydrocarbons in an aerobic sandy soil with batch and column studies. The soil-water partitioning coefficient, K(d), was enhanced in the biochar-amended soil up to a factor 36, and petroleum hydrocarbon vapor migration was retarded accordingly. Despite increased sorption, in particular of monoaromatic hydrocarbons, the overall microbial respiration was comparable in the biochar-amended and unamended soil. This was due to more rapid biodegradation of linear, cyclic and branched alkanes in the biochar amended soil. We concluded that the total petroleum hydrocarbon degradation rate was controlled by a factor other than substrate availability and the reduced availability of monoaromatic hydrocarbons in the biochar amended soil led to greater biodegradation of the other petroleum compounds.

Activated carbon immobilizes residual polychlorinated biphenyls in weathered contaminated soil

Activated carbon (AC) has recently been shown to be effective in sequestering persistent organic pollutants (POPs) from aquatic sediments. Most studies have demonstrated significant reductions of POP concentrations in water and in aquatic organisms; however, limited data exist on the possibility of using AC to immobilize remaining POPs at terrestrial contaminated sites. Under greenhouse conditions, pumpkin ssp cv. Howden) were grown, and red wiggler worms () were exposed to an industrial contaminated soil containing a mixture of polychlorinated biphenyls (PCBs), i.e., Aroclors 1254 and 1260) treated with one of four concentrations of AC (0.2, 0.8, 3.1, and 12.5%) for 2 mo. The addition of AC to contaminated soils virtually eliminated the bioavailability of PCBs to the plant and invertebrate species. There were reductions in PCB concentrations of more than 67% in ssp and 95% in . These data suggest that AC could be included as part of comprehensive site closure strategy at PCB-contaminated sites.

A dynamic model of the fate of organic chemicals in a multilayered air/soil system: development and illustrative application

A new site-specific, dynamic model (SoilPlus) was developed to simulate the fate of nonionized organic chemicals in the air/litter/soil system; key features of the model are the double-layered air compartment interacting dynamically with multilayered litter and soil compartments, with seasonal dissolved organic carbon (DOC) fluxes. The model describes the soil environment calculating separate mass balances for water, chemical, and organic matter. SoilPlus underwent a process of benchmarking and evaluation in order to reach a satisfying confirmation of its predictive capability. Several simulations were performed to estimate the role of litter and DOC in affecting the fate of a model contaminant for POPs (hexachlorobenzene). The model shows that litter can behave as a buffer in the process of transferring hexachlorobenzene from air to the mineral soil and as a trap when hexachlorobenzene tends to move from a contaminated field toward clean air. DOC seems to behave as a leaching-enhancer in certain climatic conditions (heavy rainfall, high DOC concentrations), but it does not appear to move significant amounts of HCB in a year calculation.