BaP (PAH) air quality modelling exercise over Zaragoza (Spain) using an adapted version of WRF-CMAQ model

Microplastics and Endocrine Disruptors in Typical Wastewater Treatment Plants in Megacity Shanghai

The fast development of China's urbanization has led to a notable release of emerging pollutants, including microplastics (MPs) and endocrine disruptors (EDCs). Generally, these pollutants enter the coastal environment through the discharge of wastewater treatment plants (WWTPs) and finally threaten the organisms in the receiving waterbody. The study investigated the environmental behavior of MPs and EDCs in two typical WWTPs in one of the megacities in China, Shanghai. The abundance of MPs in the influent ranged from 321 to 976 items/L. Four shapes (films, fragments, fibers, and microbead) were found, while fibers and films dominated. Transparent (31-63%) and white (20-47%) MPs were more frequently observed, while polyethylene terephthalate, cellulose, and cellophane were the main polymetric materials. The size of the MPs fell between 15.8 μm and 2220 μm, and the smaller one (<500 μm) dominated. The removal efficiencies of the two WWTPs for MPs ranged from 64% to 92%, and both WWTPs performed better for large pieces of MPs (>500 μm). For EDCs, total concentrations in the influent were detected, ranging from 113 to 2780 ng/L. Two groups, including phenolic estrogens (PEs) and steroid estrogens (SEs), were detected, and PEs, especially bisphenol A (BPA), were the predominant individuals among the studied EDCs. Specifically, PEs ranged from 82.8 to 2637 ng/L, while SEs ranged from 27.3 to 143 ng/L. The removal efficiencies of the WWTPs for EDCs varied (82.8-100%) as well, possibly due to the different treatment compartments and contamination load in the influent. Seasonal variations for both MPs and EDCs were observed. Specifically, concentrations of MPs and EDCs in WWTPs influent were higher in the wet season, as well as the removal efficiency. Furthermore, there was a correlation observed between the concentrations of MPs and EDCs, suggesting that MPs and EDCs may originate from the same source and that EDCs released by MPs cannot be ignored during treatment. Finally, the study evaluated the environmental risk of the effluents. MPs led to a minor risk (Level I), while EDCs might lead to an adverse impact on algae (RQs = 0.0014-0.024) and fish (RQs = 3.4-30.2). In summary, WWTPs received considerable amounts of MPs and EDCs. Although the WWTPs removed the contaminants efficiently, the environmental risk of the effluent needs to be noted.

Modelling benzo(a)pyrene concentrations for different meteorological conditions - Analysis of lung cancer cases and associated economic costs

Air pollution originating from the household presents a significant burden to public health, especially during the wintertime in countries, such as Poland, where coal substantially contributes to the energy market. One of the most hazardous components of particulate matter is benzo(a)pyrene (BaP). This study focusses on the impact of different meteorological conditions on BaP concentrations in Poland and associated impacts on human health and economic burdens. For this study, we used the EMEP MSC-W atmospheric chemistry transport model with meteorological data from the Weather Research and Forecasting model to analyze the spatial and temporal distribution of BaP over Central Europe. The model setup has two nested domains, with the inner domain at 4 km × 4 km over Poland, which is a hotspot for BaP concentrations. The outer domain covers countries surrounding Poland in coarser resolution (12 × 812 km), to ensure that transboundary pollution is properly characterized in the modelling. We investigated the sensitivity to variability in winter meteorological conditions on BaP levels and impacts using data from 3 years: 1) 2018, which represents average meteorological conditions during the winter season (BASE run), 2) 2010 with a cold winter (COLD), and 3) 2020 with a warm winter (WARM). The ALPHA-RiskPoll model was used to analyze the lung cancer cases and associated economic costs. The results show that the majority of Poland exceeds the target level of benzo(a)pyrene (1 ng m^-3) mainly due to high concentrations during the cold months. High concentrations of BaP have serious health implications and the number of lung cancers in Poland due to BaP exposure varies from 57 to 77 cases for the WARM and COLD years, respectively. It is reflected in the economic costs, which ranged from 136, through 174 to 185 million euros/year for the WARM, BASE and COLD model runs, respectively.

Benzo[a]pyrene—Environmental Occurrence, Human Exposure, and Mechanisms of Toxicity

Benzo[a]pyrene (B[a]P) is the main representative of polycyclic aromatic hydrocarbons (PAHs), and has been repeatedly found in the air, surface water, soil, and sediments. It is present in cigarette smoke as well as in food products, especially when smoked and grilled. Human exposure to B[a]P is therefore common. Research shows growing evidence concerning toxic effects induced by this substance. This xenobiotic is metabolized by cytochrome P450 (CYP P450) to carcinogenic metabolite: 7β,8α-dihydroxy-9α,10α-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (BPDE), which creates DNA adducts, causing mutations and malignant transformations. Moreover, B[a]P is epigenotoxic, neurotoxic, and teratogenic, and exhibits pro-oxidative potential and causes impairment of animals’ fertility. CYP P450 is strongly involved in B[a]P metabolism, and it is simultaneously expressed as a result of the association of B[a]P with aromatic hydrocarbon receptor (AhR), playing an essential role in the cancerogenic potential of various xenobiotics. In turn, polymorphism of CYP P450 genes determines the sensitivity of the organism to B[a]P. It was also observed that B[a]P facilitates the multiplication of viruses, which may be an additional problem with the widespread COVID-19 pandemic. Based on publications mainly from 2017 to 2022, this paper presents the occurrence of B[a]P in various environmental compartments and human surroundings, shows the exposure of humans to this substance, and describes the mechanisms of its toxicity.

Structural, metabolic, and functional characteristics of soil microbial communities in response to benzo[a]pyrene stress

Understanding the characteristics of soil microbes responding to benzo[a]pyrene (BaP) helps to deepen the knowledge of the risks of BaP to soil ecosystem. In this study, the structural, metabolic, and functional responses of soil microbial communities to BaP (8.11 mg kg^-1) were investigated. Analysis of microbial community structure based on 16 S rRNA and ITS gene sequencing indicated that BaP addition enriched microbes associated with aromatic compound degradation (Sphingomonas, Bacilli, Fusarium) and oligotrophs (Blastocatellaceae, Rokubacteriales), but inhibited Cyanobacteria involved in nitrogen-fixing process. Network analysis showed that the bacterial community enhanced intraspecific cooperation, while fungal community mainly altered the keystone taxa under BaP stress. Biolog EcoPlate assay demonstrated that microbial metabolism of carbon sources, especially nitrogen-containing sources, was stimulated by BaP addition. Functional analysis based on enzyme activity tests, functional gene quantification, and function annotation showed that nitrogen-cycling processes, especially nitrogen fixation, were significantly inhibited. These results suggest that BaP-tolerant microbes may establish cooperative relationships and compete for resources and ecological niches with sensitive microbes, especially those associated with nitrogen cycling, ultimately leading to enhanced carbon source utilization and restricted nitrogen cycling. This study clearly elucidates the adaptation strategies and functional shifts of soil microbial communities to BaP contamination.

Mesoscale cycling of organophosphorus flame retardants (OPFRs) in the Bohai Sea and Yellow Sea biotic and abiotic environment: A WRF-CMAQ modeling

Rapid urbanization and industrialization in the eastern seaboard region of China enhance the widespread use of organophosphorus flame retardants (OPFRs). The present study set up a coupled WRF-CMAQ-SMOKE and multi-compartment exchange modeling framework to assess the environmental fate and cycling of OPFRs and their contamination in the Bohai and Yellow Seas' marine food web. The framework predicts meteorological conditions, optimized air emissions, and concentrations of OPFRs in air, seawaters, marine sediment, and the food web. The model was implemented to simulate the temporal and spatial fluctuations of Tris (2-chloroisopropyl) phosphate (TCPP), the most dominant congener of OPFRs in China, in the Bohai and the Yellow Sea ecosystems on a spatial resolution of 10 km. Results revealed the effects of source proximity, atmospheric transport and deposition, and the changes in meteorology on TCPP's temporal-spatial distribution across different areas of coastal waters. The model also captures TCPP levels in commercial fish species in the Bohai Sea. The detailed temporal-spatial characteristics of TCPP with the mesoscale resolution provide useful information and a new tool for the environmental and health consequences of mariculture, urban and industrial emission mitigation in coastal regions for emerging chemicals, and fishery industry development.

Comparative analysis of contributions of wet deposition and photodegradation to the removal of atmospheric BaP by MFDCCA

Benzo [a] pyrene (BaP) in the atmosphere possess great carcinogenic potential to human health, and the understanding of its scavenging mechanisms has attracted considerable attention. In this work, a new quantitative method is proposed to make a comparative analysis of the long-term contributions of wet deposition and photodegradation to BaP removal based on multi-fractal detrended cross-correlation analysis (MFDCCA). According to the precipitation and global solar radiation (GSR) observations from 1998 to 2016 for two urban sites (Central/Western District and TsuenWan) in Hong Kong, the wet deposition and photodegradation of BaP are analyzed. Using MFDCCA method, long-term cross-correlation between precipitation/GSR and BaP are investigated. Moreover, the differences of multifractal features in cross-correlations of precipitation-BaP and GSR-BaP system are analyzed. Strong long-term persistence is observed in the cross-correlations for precipitation-BaP system in a one-year cycle; while cross-correlations between GSR and BaP show weak persistence over the whole timescale. Based on the meteorology in Hong Kong, this difference has been discussed. Then, contributions of wet deposition and photodegradation to atmospheric BaP removal are quantified based on MFDCCA method, which are further compared between summer and winter. The comparative analysis suggests that wet deposition plays a more significant role in the removal of atmospheric BaP. Specifically, in summer, the contributions of wet deposition are twice as much as that of photodegradation for both two sites; while in winter, the contribution of photodegradation is a little higher than that of wet deposition to BaP removal. Meanwhile, for wet deposition, the contributions in summer are about ten times greater than that in winter; while for photodegradation, the difference in contributions between summer and winter are relatively smaller. Furthermore, based on sliding window technique, the temporal evolutions in the contributions of wet deposition/photodegradation to BaP removal have been presented for both two sites. On this basis, it is discovered that the comprehensive contributions of wet deposition and photodegradation peak in June, and reach their lowest levels in December for both two sites. Quantifying the contribution of meteorological factors to the removal of atmospheric BaP is help for understanding its geochemical cycle.

Benzo[a]pyrene sourcing and abundance in a coal region in transition reveals historical pollution, rendering soil screening levels impractical

Benzo[a]pyrene (BaP) is a hazardous compound for human health and for environmental compartments. Its transfer and deposition through the atmosphere affects soil quality. In this context, we quantified the content of BaP and other Polycyclic Aromatic Hydrocarbons (PAHs) in the soils of a prominent Coal Region in Transition to test whether the soil screening levels in force are realistic and whether they reflect the complexity of regions closely linked to heavy industries and mining. In this regard, soil screening levels are thresholds often established without considering historical anthropogenic activities that affect soil (diffuse pollution). The 150 soil samples studied showed a notable content of high molecular weight PAHs, and BaP surpassed the threshold levels in practically the entire area. PAH-parent diagrams revealed a relatively homogenous fingerprint of four clusters obtained in a multivariate statistical study. In addition, molecular diagnostic ratios pointed to coal combustion as the main pollution source, whereas only some outliers appeared to be related to specific spills. A BaP threshold was calculated to be 0.24 mg kg^-1, over 10 times the limit established in Spain. Finally, a factor analysis revealed a positive correlation of BaP with elements usually emitted in coal combustion processes, such as Tl and V. This observation fosters the hypothesis of a historical and indelible pollution fingerprint in soils whose sources, characteristics and potential environmental and health concerns deserve further attention. All things considered, caution should be taken when using soil screening levels in regions associated with coal exploitation and heavy industry.

Concentration levels and carcinogenic and mutagenic risks of PM2.5-bound polycyclic aromatic hydrocarbons in an urban-industrial area in South Africa

Concerns over the health effects of exposure to particulate matter of aerodynamic diameter of less than 2.5 μm (PM_2.5) led the South African Government to establish the national standard for PM_2.5 in the year 2012. However, there is currently no exposure limit for polycyclic aromatic hydrocarbons (PAHs) and PM_2.5-bound PAHs. The understanding of the concentration levels and potential health risks of exposure to PM_2.5-bound PAHs is important in ensuring a suitable risk assessment and risk management plans. This study, therefore, determined the concentration levels and carcinogenic and mutagenic health risks of PM_2.5-bound PAHs. A hundred and forty-four PM_2.5 samples were collected over 4 months during the winter and summer seasons of 2016 in an industrial area. The concentrations of 16 PAHs were analysed by gas chromatography-mass spectrometry, and their carcinogenic and mutagenic risks were determined using the Human Health Risk Assessment model. The mean winter (38.20 ± 8.4 μg/m³) and summer (22.3 ± 4.1 μg/m³) concentrations of PM_2.5 levels were lower than the stipulated 40 μg/m³ daily limit. The daily inhalation and ingestion exposure to PAHs for all age groups were higher than the daily exposure through the dermal contact. Children and adults are more likely to inhale and ingest PAHs in PM_2.5 than infants. The excess cancer risk and excess mutagenic risk values were below the priority risk level (10^-4). There is a potential risk of 1-8 per million persons developing cancer from exposure to benzo[a]anthracene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, and dibenz[a,h]anthracene over a lifetime of 70 years.

Effects of benzo [a] pyrene (BaP) on the composting and microbial community of sewage sludge

Benzo [a] pyrene (BaP), the most ubiquitous polycyclic aromatic hydrocarbons (PAHs) found in sludge, can impact the composting processes of sewage sludge as well as the quality of compost produced. In the present study, we investigated the effects of BaP at various concentrations on physicochemical characteristics, heavy metal passivation, and microbial community during the composting processes. The removal efficiency of BaP at 5 and 20 mg kg^-1 after composting was 51.1% and 74.2%, respectively. In comparison with the control, the content of residual Cu, Pb, Cr and Ni in 5 mg kg^-1 BaP contained system declined dramatically on the second day of composting, while such content in 20 mg kg^-1 BaP system significantly decreased on the 8th day. Regardless of the presence of BaP in the sludge, composting process had a positive passivation effect on Cu, Pb, Cr and Ni. A stronger inhibitory effect of BaP at higher concentration was observed on microorganism, which reduced microbial abundance and species in the composting, and influenced microbial diversity. Besides, microbial communities in BaP-containing composting would improve the transformation of silicates and minerals, increase the concentration of humus and extend the passivation time of heavy metals. As these results verified, composting process could remove BaP from the sludge effectively, and BaP had a significant impact on heavy metal passivation and abundance and composition of microbial community during the composting process.

Combining monitoring and modelling approaches for BaP characterization over a petrochemical area

In this study, air concentrations of BaP in two different seasons (winter 2015 and summer 2016) and BaP levels in ground vegetation from Tarragona County were used as control simulations performed with the WRF-CHIMERE air quality modelling system, in order to reproduce the incidence of that hazardous chemical in air and soils. The CTM was validated for the present climatology, showing a good ability to represent air and soil concentrations of BaP over the target domain (petrochemical, chemical, urban and background sites), particularly in the winter. Then, the variation of the BaP concentrations in air and soils were simulated for the time series 1996-2015 and for the climate change scenario RCP8.5 (2031-2050). While an increase is projected for the levels in air, particularly in chemical and remote sites where the variation can go up to 10%, in terms of soil deposition the findings are the opposite, with an evident decrease in soil BaP concentrations, particularly for background sites. Finally, a potential health effect of BaP for the local population (lung cancer) was assessed. Although according to the projections the EU threshold for BaP atmospheric incidence (1 ng m^-3) will not be reached by 2050, there will be an increase in the life-time risk of lung cancer, particularly in the most populated areas within the simulation domain.

Temperature effect on phase state and reactivity controls atmospheric multiphase chemistry and transport of PAHs

Polycyclic aromatic hydrocarbons like benzo(a)pyrene (BaP) in atmospheric particulate matter pose a threat to human health because of their high carcinogenicity. In the atmosphere, BaP is mainly degraded through a multiphase reaction with ozone, but the fate and atmospheric transport of BaP are poorly characterized. Earlier modeling studies used reaction rate coefficients determined in laboratory experiments at room temperature, which may overestimate/underestimate degradation rates when applied under atmospheric conditions. Moreover, the effects of diffusion on the particle bulk are not well constrained, leading to large discrepancies between model results and observations. We show how regional and global distributions and transport of BaP can be explained by a new kinetic scheme that provides a realistic description of the temperature and humidity dependence of phase state, diffusivity, and reactivity of BaP-containing particles. Low temperature and humidity can substantially increase the lifetime of BaP and enhance its atmospheric dispersion through both the planetary boundary layer and the free troposphere. The new scheme greatly improves the performance of multiscale models, leading to better agreement with observed BaP concentrations in both source regions and remote regions (Arctic), which cannot be achieved by less-elaborate degradation schemes (deviations by multiple orders of magnitude). Our results highlight the importance of considering temperature and humidity effects on both the phase state of aerosol particles and the chemical reactivity of particulate air pollutants.

Estimating population exposure to ambient polycyclic aromatic hydrocarbon in the United States - Part I: Model development and evaluation

PAHs (polycyclic aromatic hydrocarbons) in the environment are of significant concern due to their negative impact on human health. PAH measurements at the air toxics monitoring network stations alone are not sufficient to provide a complete picture of ambient PAH levels or to allow accurate assessment of public exposure in the United States. In this study, speciation profiles for PAHs were prepared using data assembled from existing emission profile data bases, and the Sparse Matrix Operator Kernel Emissions (SMOKE) model was used to generate the gridded national emissions of 16 priority PAHs in the US. The estimated emissions were applied to simulate ambient concentration of PAHs for January, April, July and October 2011, using a modified Community Multiscale Air Quality (CMAQ) model (v5.0.1) that treats the gas and particle phase partitioning of PAHs and their reactions in the gas phase and on particle surface. Predicted daily PAH concentrations at 61 air toxics monitoring sites generally agreed with observations, and averaging the predictions over a month reduced the overall error. The best model performance was obtained at rural sites, with an average mean fractional bias (MFB) of -0.03 and mean fractional error (MFE) of 0.70. Concentrations at suburban and urban sites were underestimated with overall MFB=-0.57 and MFE=0.89. Predicted PAH concentrations were highest in January with better model performance (MFB=0.12, MFE=0.69; including all sites), and lowest in July with worse model performance (MFB=-0.90, MFE=1.08). Including heterogeneous reactions of several PAHs with O3 on particle surface reduced the over-prediction bias in winter, although significant uncertainties were expected due to relative simple treatment of the heterogeneous reactions in the current model.

Estimating population exposure to ambient polycyclic aromatic hydrocarbon in the United States - Part II: Source apportionment and cancer risk assessment

A revised Community Multiscale Air Quality (CMAQ) model was developed to simulate the emission, reactions, transport, deposition and gas-to-particle partitioning processes of 16 priority polycyclic aromatic hydrocarbons (PAHs), as described in Part I of the two-part series. The updated CMAQ model was applied in this study to quantify the contributions of different emission sources to the predicted PAH concentrations and excess cancer risk in the United States (US) in 2011. The cancer risk in the continental US due to inhalation exposure of outdoor naphthalene (NAPH) and seven larger carcinogenic PAHs (cPAHs) was predicted to be significant. The incremental lifetime cancer risk (ILCR) exceeds 1×10-5 in many urban and industrial areas. Exposure to PAHs was estimated to result in 5704 (608-10,800) excess lifetime cancer cases. Point sources not related with energy generation and the oil and gas processes account for approximately 31% of the excess cancer cases, followed by non-road engines with 18.6% contributions. Contributions of residential wood combustion (16.2%) are similar to that of transportation-related sources (mostly motor vehicles with small contributions from railway and marine vessels; 13.4%). The oil and gas industry emissions, although large contributors to high concentrations of cPAHs regionally, are only responsible of 4.3% of the excess cancer cases, which is similar to the contributions of non-US sources (6.8%) and non-point sources (7.2%). The power generation units pose the most minimal impact on excess cancer risk, with contributions of approximately 2.3%.

A new grid-scale model simulating the spatiotemporal distribution of PM2.5-PAHs for exposure assessment

Exposure to polycyclic aromatic hydrocarbons (PAHs) associated with ambient air particulate matter (PM) poses significant health concerns. Several modeling approaches have been developed for simulating ambient PAHs, but no hourly intra-urban spatial data are currently available. The aim of this study is to develop a new modeling strategy in simulating, on an hourly basis, grid-scale PM2.5-PAH levels. PM and PAHs were collected over a one-year time frame through an established air quality monitoring network within a metropolitan area of Taiwan. Multivariate linear regression models, in combination with correlation analysis and PAH source identification by principal component analysis (PCA), were performed to simulate hourly grid-scale PM2.5-PAH concentrations, taking criteria pollutants and meteorological variables selected as possible predictors. The simulated levels of 72-h personal exposure were found to be significantly (R=0.729**, p<0.01) correlated with those analyzed from portable personal monitors. A geographic information system (GIS) was used to visualize spatially distributed PM2.5-PAH concentrations of the modeling results. This new grid-scale modeling strategy, incorporating the output of simulated data by GIS, provides a useful and versatile tool in personal exposure analysis and in the health risk assessment of air pollution.

Distribution patterns, infiltration and health risk assessment of PM2.5-bound PAHs in indoor and outdoor air in cold zone

In this study we investigated the distribution patterns, infiltration and health risk assessment of PM2.5-bound PAHs in indoor and outdoor air done in Harbin city, northeastern China. Simultaneous indoor and outdoor sampling was done to collect 264 PM2.5 samples from four sites during winter, summer, and spring. Infiltration of PAHs into indoors was estimated using Retene, Benzo [ghi]perylene and Chrysene as reference compounds, where the latter compound was suggested to be a good estimator and subsequently used for further calculation of infiltration factors (IFs). Modeling with positive matrix factorization (PMF5) and estimation of diagnostic isomeric ratios were applied for identifying sources, where coal combustion, crop residues burning and traffic being the major contributors, particularly during winter. Linear discriminant analysis (LDA) has been utilized to show the distribution patterns of individual PAH congeners. LDA showed that, the greatest seasonal variability was attributed to high molecular weight compounds (HMW PAHs). Potential health risk of PAHs exposure was assessed through relative potency factor approach (RPF). The levels of the sum of 16 US EPA priority PAHs during colder months were very high, with average values of 377 ± 228 ng m(-)(3) and 102 ± 75.8 ng m(-)(3), for the outdoors and indoors, respectively. The outdoor levels reported to be 19 times higher than the outdoor concentrations during warmer months (summer + spring), while the indoor concentrations were suggested to be 9 times and 10 times higher than that for indoor summer (average 11.73 ± 4 ng m(-3)) and indoor spring (9.5 ± 3.3 ng m(-3)). During nighttime, outdoor PAHs revealed wider range of values compared to datytime which was likely due to outdoor temperature, a weather parameter with the strongest negative influence on ∑16PAHs compared to low impact of relative humidity and wind speed.

Mechanistic and kinetic studies on OH-initiated atmospheric oxidation degradation of benzo[α]pyrene in the presence of O2 and NO(x)

The degradation of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere can lead to toxic derivatives which contribute to the carcinogenic potential of particulate organic matter. This paper aimed to investigate the mechanism of the OH-initiated oxidation degradation of benzo[α]pyrene (BaP), a cancer risk indicator. High-accuracy molecular orbital calculations were carried out, and all of the possible degradation pathways were discussed. The theoretical results were compared with the available experimental observation. The possible secondary reactions were also investigated. The rate constants of the crucial elementary steps were evaluated by using the Rice-Ramsperger-Kassel-Marcus (RRKM) theory. The dominant degradation products involve benzo[α]pyren-ol, nitro-benzo[α]pyrene, benzo[α]pyrene-7,10-dione as well as several ring-opened products such as alkyl substituted benzanthraldehyde et al. In particular, water plays an important role in the degradation pathways leading to the formation of nitro-benzo[α]pyrene. This work provides a comprehensive investigation of the OH-initiated degradation of BaP and should help to clarify its potential risk.

Source apportionment of atmospheric PM2.5-bound polycyclic aromatic hydrocarbons by a PMF receptor model. Assessment of potential risk for human health

One year sampling (2011-2012) campaign of airborne PM2.5-bound PAH was performed in Zaragoza, Spain. A source apportionment of total PAH by Positive Matrix Factorization (PMF) was applied in order to quantify potential PAH pollution sources. Four sources were apportioned: coal combustion, vehicular emissions, stationary emissions and unburned/evaporative emissions. Although Directive 2004/107/EC was fulfilled regarding benzo(a)pyrene (BaP), episodes exceeding the limit value of PM2.5 according to Directive 2008/50/EC were found. These episodes of high negative potential for human health were studied, obtaining a different pattern for the exceedances of PM2.5 and the lower assessment threshold of BaP (LATBaP). In both cases, stationary emissions contributed majority to total PAH. Lifetime cancer risk exceeded the unit risk recommended by the World Health Organization for those episodes exceeding the LATBaP and the PM2.5 exceedances for the warm season. For the cold season, the risk was higher for the LATBaP than for the PM2.5 exceedances.

Levels, composition profiles and sources of polycyclic aromatic hydrocarbons in surface sediments from Nan'ao Island, a representative mariculture base in South China

Levels, composition profiles and sources of 16 polycyclic aromatic hydrocarbons (PAHs) in surface sediments from Nan'ao Island, one of the largest mariculture bases in South China were investigated. The total PAHs concentrations ranged from 265.49 to 951.27 ng/g (dry weight) with a mean of 515.90 ng/g, and seven possible carcinogenic PAHs accounted for 76.94% of total PAHs. Among various mariculture sections, the highest PAHs level was found in the large seaweed culture; while the lowest concentration was detected in the abandoned culture. The composition of PAHs was characterized by low molecular weight PAHs, and Phe Ant and Pyr were the dominant constituent. PAHs may be mainly originated from petroleum and combustion of biomass and coal. Risk assessments suggested that the probability of adverse effect was lower than 25% and PAHs exposure was moderately carcinogenic.