Using normal ranges for interpreting results of monitoring and tiering to guide future work: A case study of increasing polycyclic aromatic compounds in lake sediments from the Cold Lake oil sands (Alberta, Canada) described in Korosi et al. (2016)

A critical review of the ecological status of lakes and rivers from Canada's oil sands region

We synthesize the information available from the peer-reviewed literature on the ecological status of lakes and rivers in the oil sands region (OSR) of Canada. The majority of the research from the OSR has been performed in or near the minable region and examines the concentrations, flux, or enrichment of contaminants of concern (CoCs). Proximity to oil sands facilities and the beginning of commercial activities tend to be associated with greater estimates of CoCs across studies. Research suggests the higher measurements of CoCs are typically associated with wind-blown dust, but other sources also contribute. Exploratory analyses further suggest relationships with facility production and fuel use data. Exceedances of environmental quality guidelines for CoCs are also reported in lake sediments, but there are no indications of toxicity including those within the areas of the greatest atmospheric deposition. Instead, primary production has increased in most lakes over time. Spatial differences are observed in streams, but causal relationships with industrial activity are often confounded by substantial natural influences. Despite this, there may be signals associated with site preparation for new mines, potential persistent differences, and a potential effect of petroleum coke used as fuel on some indices of health in fish captured in the Steepbank River. There is also evidence of improvements in the ecological condition of some rivers. Despite the volume of material available, much of the work remains temporally, spatially, or technically isolated. Overcoming the isolation of studies would enhance the utility of information available for the region, but additional recommendations for improving monitoring can be made, such as a shift to site-specific analyses in streams and further use of industry-reported data. Integr Environ Assess Manag 2022;18:361-387. © 2021 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Paleotoxicity of petrogenic and pyrogenic hydrocarbon mixtures in sediment cores from the Athabasca oil sands region, Alberta (Canada)

Despite the economic benefits of the oil and gas industry in Northern Alberta, significant concerns exist regarding the impacts of increased oil production on the environment and human health. Several studies have highlighted increases in the concentrations of polycyclic aromatic compounds (PACs) and other hydrocarbons in the atmosphere, water, soil and sediments, plants, wildlife and fish in the Athabasca Oil Sands Region (AOSR) as a result of oil sands industrial activity. Sediment cores can provide information on the temporal trends of contaminants to the environment and provide important baseline information when monitoring data are absent. Here we combined analytical chemistry and a mammalian cell-based bioassay in dated lake sediment cores to assess paleotoxicity in freshwater systems in the AOSR. Sediment intervals were radiometrically dated and subsequently analysed for PACs. PAC extracts from select dated intervals were used in cell-based bioassays to evaluate their endocrine disrupting properties. We demonstrated spatial and temporal variability in the PAC composition of sediment cores around the AOSR with some of the highest concentrations of PACs detected near oil sands industrial activity north of Fort McMurray (AB) in La Saline Natural Area. Recent sediment had positive enrichment factors across most PAC analytes at this site with heavier pyrogenic compounds such as benz(a)anthracene/chrysene and benzofluoranthene/benzopyrene dominating. Our study is the first to link chemical analysis of sediment cores with biological effect assessments of endocrine activity showing feasibility of extending the usefulness of sediment cores in monitoring programs interested in complex mixture assessments. While we observed no spatial or temporal differences in ERα mediated signaling, AhR CALUX results mirrored those of the chemical analysis, demonstrating the utility of coupling biological effects assessments to historical reconstructions of contaminant inputs to the natural environment.

Potential Influence of Sewage Phosphorus and Wet and Dry Deposition Detected in Fish Collected in the Athabasca River North of Fort McMurray

The health of fish is a primary indicator of ecosystem response in the Oil Sands Region of northeastern Alberta. However, industrial activity is accompanied by other stressors, such as the discharge of sewage, municipal activity, forest fires, and natural weathering and erosion of bitumen. To combat the spatial confounding influences, we examined white sucker (Catostomus commersonii) captured in the Athabasca River at sites over time (2011–2019) and included covariates to account for the possible sources of influence. The analyses suggest spatially heterogeneous influences of natural factors on fish, such as discharge and air temperature, but also the influence of sewage phosphorus and precipitation. Among the stressors examined here, precipitation may be the most complex and may include a mixture of sources including inputs from tributaries, urban activity, industrial development, and forest fires. Although suggestive, the attribution of variance and detection of changes are affected by sample sizes in some years; these analyses may have missed effects or misspecified important relationships, especially in males. Despite these limitations, the analyses suggest potential differences may be associated with precipitation and highlight the need to integrate robust information on known and suspected stressors in future monitoring of aquatic ecosystems in the oil sands region and beyond.

Reanalysis of aerial deposition of metals and polycyclic aromatic compounds to snow in the Athabasca Oil Sands Region of Alberta Canada

Oil sands mining and bitumen upgrading activities in the Athabasca Oil Sands Region (AOSR) have been identified as sources of metals and polycyclic aromatic compounds (PAC) being deposited to the regional snowpack. We performed an independent reanalysis of publicly available AOSR snow pack data to: replicate previous results; to provide new insights into the spatial and temporal patterns of metal and PAC deposition; and, to determine whether certain metals or PACs were associated with specific oil sands mining or upgrading activities. Using PAC ratios, we use a K-means clustering approach to classify snowpack data into two combustion-dominated classes, and three classes associated with oil sands mining and bitumen upgrading. Snow samples dominated by "oil sands mine" emissions are consistent with a petrogenic source and exhibited low UNS ratios and high DBT ratios. Snow samples dominated by "petroleum coke" emissions had the highest BaP ratios, high DBT ratios, and were collected nearest the upgrader complexes. Metals data indicate snow samples dominated by oil sands mine emissions are consistent with an Athabasca Sands type composition. Those dominated by emissions from petroleum coke show enrichment of biophile metals V, Ni, and M. We conclude that previous studies have over-estimated environmental loadings of PACs, their spatial extent, and direction of their trend over time. These differences are attributed to the use of arithmetic rather than geometric spatial averaging, use of an arbitrary location (AR6) to determine the extent of metals and PAC deposition, and because previous studies neglected to account for metals and PACs being deposited from non-oil sands sources. Oil sands operators continue to reduce their emissions intensity, however there is an emerging consensus that mitigating fugitive emissions from petroleum coke stockpiles may represent the greatest opportunity to reduce environmental loadings of PACs in the AOSR.

Principles and Challenges for Multi-Stakeholder Development of Focused, Tiered, and Triggered, Adaptive Monitoring Programs for Aquatic Environments

In Canada, there is almost 30 years of experience in developing tiered and triggered adaptive monitoring programs focused on looking at whether environmental concerns remain when pulp and paper mills, or metal mines, are in compliance with their discharge limits. These environmental effects monitoring programs were based on nationally standardized designs. Many of the programs have been developed through multi-stakeholder working groups, and the evolution of the program faced repeated frictions and differing opinions on how to design environmental monitoring programs. This paper describes key guidance to work through the initial steps in program design, and includes scientific advice based on lessons learned from the development of the Canadian aquatic environmental effects monitoring program.

Advances in science and applications of air pollution monitoring: A case study on oil sands monitoring targeting ecosystem protection

The potential environmental impact of air pollutants emitted from the oil sands industry in Alberta, Canada, has received considerable attention. The mining and processing of bitumen to produce synthetic crude oil, and the waste products associated with this activity, lead to significant emissions of gaseous and particle air pollutants. Deposition of pollutants occurs locally (i.e., near the sources) and also potentially at distances downwind, depending upon each pollutant's chemical and physical properties and meteorological conditions. The Joint Oil Sands Monitoring Program (JOSM) was initiated in 2012 by the Government of Canada and the Province of Alberta to enhance or improve monitoring of pollutants and their potential impacts. In support of JOSM, Environment and Climate Change Canada (ECCC) undertook a significant research effort via three components: the Air, Water, and Wildlife components, which were implemented to better estimate baseline conditions related to levels of pollutants in the air and water, amounts of deposition, and exposures experienced by the biota. The criteria air contaminants (e.g., nitrogen oxides [NO_x], sulfur dioxide [SO₂], volatile organic compounds [VOCs], particulate matter with an aerodynamic diameter <2.5 μm [PM_2.5]) and their secondary atmospheric products were of interest, as well as toxic compounds, particularly polycyclic aromatic compounds (PACs), trace metals, and mercury (Hg). This critical review discusses the challenges of assessing ecosystem impacts and summarizes the major results of these efforts through approximately 2018. Focus is on the emissions to the air and the findings from the Air Component of the ECCC research and linkages to observations of contaminant levels in the surface waters in the region, in aquatic species, as well as in terrestrial and avian species. The existing evidence of impact on these species is briefly discussed, as is the potential for some of them to serve as sentinel species for the ongoing monitoring needed to better understand potential effects, their potential causes, and to detect future changes. Quantification of the atmospheric emissions of multiple pollutants needs to be improved, as does an understanding of the processes influencing fugitive emissions and local and regional deposition patterns. The influence of multiple stressors on biota exposure and response, from natural bitumen and forest fires to climate change, complicates the current ability to attribute effects to air emissions from the industry. However, there is growing evidence of the impact of current levels of PACs on some species, pointing to the need to improve the ability to predict PAC exposures and the key emission source involved. Although this critical review attempts to integrate some of the findings across the components, in terms of ECCC activities, increased coordination or integration of air, water, and wildlife research would enhance deeper scientific understanding. Improved understanding is needed in order to guide the development of long-term monitoring strategies that could most efficiently inform a future adaptive management approach to oil sands environmental monitoring and prevention of impacts. Implications: Quantification of atmospheric emissions for multiple pollutants needs to be improved, and reporting mechanisms and standards could be adapted to facilitate such improvements, including periodic validation, particularly where uncertainties are the largest. Understanding of baseline conditions in the air, water and biota has improved significantly; ongoing enhanced monitoring, building on this progress, will help improve ecosystem protection measures in the oil sands region. Sentinel species have been identified that could be used to identify and characterize potential impacts of wildlife exposure, both locally and regionally. Polycyclic aromatic compounds are identified as having an impact on aquatic and terrestrial wildlife at current concentration levels although the significance of these impacts and attribution to emissions from oil sands development requires further assessment. Given the improvement in high resolution air quality prediction models, these should be a valuable tool to future environmental assessments and cumulative environment impact assessments.

Developing and applying control charts to detect changes in water chemistry parameters measured in the Athabasca River near the oil sands: A tool for surveillance monitoring

Control charting is a simple technique to identify change and is well suited for use in water quality programs. Control charts accounting for covariation associated with discharge and in some cases time were used to explore example and representative variables routinely measured in the Athabasca River near the oil sands area for indications of change. The explored variables include 5 major ions (chloride, sodium, sulfate, calcium, magnesium), 5 total metals (aluminum, iron, thallium, molybdenum, vanadium), and total suspended solids at two sites straddling the developments north of Fort McMurray. Regression equations developed from reference data (1988-2009) were used to predict observations and calculate residuals from later test data (2010-2016). Evidence of change was sought in the deviation of residual errors from the test period compared with the patterns expected and defined from probability distributions of the reference residuals using the odds ratio. In most cases, the patterns in test residuals were not statistically different from those expected from the reference period at either site, especially when data were examined annually. However, differences were found at both locations, more were found at the downstream site, and more differences emerged as data accumulated and were analyzed over time. In sum, the analyses at the downstream site suggest higher concentrations than predicted in most major ions, but the source of the changes is uncertain. In contrast, the concentrations of most metals at during the test period were lower than expected, which may be related to deposition patterns of materials or weathering of minerals during construction activities of the 2000s which influence the reference data used. The analyses also suggest alternative approaches may be necessary to understand change in some variables. Despite this, the results support the use of control charts to detect changes in water chemistry parameters and the value of the tool in surveillance phases of long-term and adaptive monitoring programs. Environ Toxicol Chem 2018;37:2296-2311. © 2018 SETAC.

Are we closer to the vision? A proposed framework for incorporating omics into environmental assessments

Environmental science has benefited a great deal from omics-based technologies. High-throughput toxicology has defined adverse outcome pathways (AOPs), prioritized chemicals of concern, and identified novel actions of environmental chemicals. While many of these approaches are conducted under rigorous laboratory conditions, a significant challenge has been the interpretation of omics data in "real-world" exposure scenarios. Clarity in the interpretation of these data limits their use in environmental monitoring programs. In recent years, one overarching objective of many has been to address fundamental questions concerning experimental design and the robustness of data collected under the broad umbrella of environmental genomics. These questions include: (1) the likelihood that molecular profiles return to a predefined baseline level following remediation efforts, (2) how reference site selection in an urban environment influences interpretation of omics data and (3) what is the most appropriate species to monitor in the environment from an omics point of view. In addition, inter-genomics studies have been conducted to assess transcriptome reproducibility in toxicology studies. One lesson learned from inter-genomics studies is that there are core molecular networks that can be identified by multiple laboratories using the same platform. This supports the idea that "omics-networks" defined a priori may be a viable approach moving forward for evaluating environmental impacts over time. Both spatial and temporal variability in ecosystem structure is expected to influence molecular responses to environmental stressors, and it is important to recognize how these variables, as well as individual factor (i.e. sex, age, maturation), may confound interpretation of network responses to chemicals. This mini-review synthesizes the progress made towards adopting these tools into environmental monitoring and identifies future challenges to be addressed, as we move into the next era of high throughput sequencing. A conceptual framework for validating and incorporating molecular networks into environmental monitoring programs is proposed. As AOPs become more defined and their potential in environmental monitoring assessments becomes more recognized, the AOP framework may prove to be the conduit between omics and penultimate ecological responses for environmental risk assessments.