Impact of manganese ferrite (MnFe2O4) nanoparticles on growth and magnetic character of barley (Hordeum vulgare L.)

Nanotechnology in Agriculture: Manganese Ferrite Nanoparticles as a Micronutrient Fertilizer for Wheat

Limited research has focused on nanoparticle (NP) applications' impact on edible wheat parts in a field environment. Here, we studied the nutritional quality of edible parts of wheat (Triticum aestivum L.) with a field experiment by spraying MnFe2O4 nanoparticles. Wheat was foliar sprayed with 0, 25, 50, and 100 mg/L composite manganese ferrite (MnFe2O4) NPs during 220 d of a growth period. Ionic controls were prepared using the conventional counterparts (MnSO4·H2O and FeSO4·7H2O) to compare with the 100 mg/L MnFe2O4 NPs. After three consecutive foliar applications, nanoparticles demonstrated a substantial elevation in grain yield and harvest index, exhibiting a noteworthy increase to 5.0 ± 0.12 t/ha and 0.46 ± 0.001 in the 100 mg/L NP dose, respectively, concomitant with a 14% enhancement in the grain number per spike. Fe, Mn, and Ca content in grain increased to 77 ± 2.7 mg/kg, 119 ± 2.8 mg/kg, and 0.32 ± 7.9 g/kg in the 100 mg/L NPs, respectively. Compared to the ion treatment, the 100 mg/L NP treatments notably boosts wheat grain crude protein content (from 13 ± 0.79% to 15 ± 0.58%) and effectively lowers PA/Fe levels (from 11 ± 0.7 to 9.3 ± 0.5), thereby improving Fe bioavailability. The VSM results exhibited a slight superparamagnetic behavior, whereas the grains and stems exhibited diamagnetic behavior. The results indicate that the nanomaterial did not accumulate in the grains, suggesting its suitability as an Fe and Mn-rich fertilizer in agriculture. Above all, the foliar application of nanocomposites increased the concentrations of Fe, Mn, and Ca in wheat grains, accompanied by a significant enhancement in grain yield. Therefore, the research results indicate that the foliar application of MnFe2O4 NPs can positively regulate wheat grains' nutritional quality and yield.

Simultaneous immobilization of V and Cr availability, speciation in contaminated soil and accumulation in ryegrass by using Fe-modified pyrolysis char

In this study, municipal waste pyrolytic char (PEWC) was prepared by pyrolysis from municipal solid waste extracted in landfills, and Fe-based modified pyrolytic char (Fe-PEWC) was prepared by modification. Focusing on the evaluation of the stabilization capacity of Fe-PEWC for vanadium (V) and chromium (Cr) in soils, the effects of PEWC addition on soil properties, bioavailability and morphological distribution of V and Cr, ryegrass growth, and V and Cr accumulation were thoroughly investigated. The results of pot experiment showed that the application of PEWC and Fe-PEWC significantly (P < 0.05) improved soil properties (such as pH, EC, total nitrogen, available phosphorus, available potassium, and organic matter). After 42 days of cultivation, Fe-PEWC has a better fixation effect on heavy metals, and the bioavailable V and Cr of 3% Fe-PEWC decreased by 14.96% and 19.48%, respectively. The exchangeable state and reducible state decreased, while the oxidizable state and residual state increased to varying degrees. The Fe-PEWC can effectively reduce the accumulation of V and Cr in ryegrass by 71.25% and 76.43%, respectively, thereby reducing their toxicity to plants. In summary, modified pyrolytic char can effectively solidify heavy metals in soil, improve soil ecology and reduce the toxicity to plants. The use of excavated waste as a raw material for the preparation of soil heavy metal curing agent has the significance of resource recycling, low price, and practical application.

Manganese Nanoparticles: Synthesis, Mechanisms of Influence on Plant Resistance to Stress, and Prospects for Application in Agricultural Chemistry

Manganese (Mn) is an important microelement for the mineral nutrition of plants, but it is not effectively absorbed from the soil and mineral salts added thereto and can also be toxic in high concentrations. Mn nanoparticles (NPs) are less toxic, more effective, and economical than Mn salts due to their nanosize. This article critically reviews the current publications on Mn NPs, focusing on their effects on plant health, growth, and stress tolerance, and explaining possible mechanisms of their effects. This review also provides basic information and examples of chemical, physical, and ecological ("green") methods for the synthesis of Mn NPs. It has been shown that the protective effect of Mn NPs is associated with their antioxidant activity, activation of systemic acquired resistance (SAR), and pronounced antimicrobial activity against phytopathogens. In conclusion, Mn NPs are promising agents for agriculture, but their effects on gene expression and plant microbiome require further research.

Inhibitory impact of MgO nanoparticles on oxidative stress and other physiological attributes of spinach plant grown under field condition

Green synthesis of NPs is preferred due to its eco-friendly procedures and non-toxic end products. However, unintentional release of NPs can lead to environmental pollution affecting living organisms including plants. NPs accumulation in soil can affect the agricultural sustainability and crop production. In this context, we report the morphological and biochemical response of spinach nanoprimed with MgO-NPs at concentrations, 10, 50, 100, and 150 µg/ml. Nanopriming reduced the spinach root length by 14-26%, as a result a reduction of 20-74% in the length of spinach shoots was observed. The decreased spinach shoot length inhibited the chlorophyll accumulation by 21-55%, thus reducing the accumulation of carbohydrates and yield by 46 and 49%, respectively. The reduced utilization of the total absorbed light further enhanced ROS generation and oxidative stress by 32%, thus significantly altering their antioxidant system. Additionally, a significant variation in the accumulation of flavonoid pathway downstream metabolites myricitin, rutin, kaempferol-3 glycoside, and quercitin was also revealed on MgO-NPs nanopriming. Additionally, NPs enhanced the protein levels of spinach probably as an osmoprotectant to regulate the oxidative stress. However, increased protein precipitable tannins and enhanced oxidative stress reduced the protein digestibility and solubility. Overall, MgO-NPs mediated oxidative stress negatively affected the growth, development, and yield of spinach in fields in a concentration dependent manner.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12298-023-01391-9.

Efficacy of Carbon Nanodots and Manganese Ferrite (MnFe2O4) Nanoparticles in Stimulating Growth and Antioxidant Activity in Drought-Stressed Maize Inbred Lines

Despite being the third most-consumed crop, maize (Zea mays L.) is highly vulnerable to drought stress. The predominant secondary metabolite in plants is phenolic acids, which scavenge reactive oxygen species to minimize oxidative stress under drought stress. Herein, the effect of carbon nanodots (CND) and manganese ferrite (MnFe2O4) nanoparticles (NP) on the drought stress tolerance of maize has been studied. The experimental results revealed that the highest leaf blade length (54.0 cm) and width (3.9 cm), root length (45.2 cm), stem diameter (11.1 mm), root fresh weight (7.0 g), leaf relative water content (84.8%) and chlorogenic (8.7 µg/mL), caffeic (3.0 µg/mL) and syringic acid (1.0 µg/mL) contents were demonstrated by CND-treated (10 mg L-1) inbred lines (GP5, HW19, HCW2, 17YS6032, HCW3, HCW4, HW7, HCW2, and 16S8068-9, respectively). However, the highest shoot length (71.5 cm), leaf moisture content (83.9%), shoot fresh weight (12.5 g), chlorophyll content (47.3), and DPPH free radical scavenging activity (34.1%) were observed in MnFe2O4 NP-treated (300 mg L-1) HF12, HW15, 11BS8016-7, HW15, HW12, and KW7 lines, respectively. The results indicate that CND and MnFe2O4 NP can mitigate drought stress effects on different accessions of the given population, as corroborated by improvements in growth and physio-biochemical traits among several inbred lines of maize.

Effect of Multi-walled Carbon Nanotubes and Manganese and Zinc Doped Ferrites on the Development of Capsicum annuum

Nanotechnology applied to agriculture (nanoagriculture) represents a watershed in the study and development of novel alternatives that could strongly influence agricultural practices. In this research, we documented the comparative study with multi-walled carbon nanotube (MWCNT) and ferrites doped with zinc-manganese in C. annuum development, due to the nanoparticles study in plant crops has been showing beneficial effects.

Nanotechnology in Food and Plant Science: Challenges and Future Prospects

Globally, food safety and security are receiving a lot of attention to ensure a steady supply of nutrient-rich and safe food. Nanotechnology is used in a wide range of technical processes, including the development of new materials and the enhancement of food safety and security. Nanomaterials are used to improve the protective effects of food and help detect microbial contamination, hazardous chemicals, and pesticides. Nanosensors are used to detect pathogens and allergens in food. Food processing is enhanced further by nanocapsulation, which allows for the delivery of bioactive compounds, increases food bioavailability, and extends food shelf life. Various forms of nanomaterials have been developed to improve food safety and enhance agricultural productivity, including nanometals, nanorods, nanofilms, nanotubes, nanofibers, nanolayers, and nanosheets. Such materials are used for developing nanofertilizers, nanopesticides, and nanomaterials to induce plant growth, genome modification, and transgene expression in plants. Nanomaterials have antimicrobial properties, promote plants' innate immunity, and act as delivery agents for active ingredients. Nanocomposites offer good acid-resistance capabilities, effective recyclability, significant thermostability, and enhanced storage stability. Nanomaterials have been extensively used for the targeted delivery and release of genes and proteins into plant cells. In this review article, we discuss the role of nanotechnology in food safety and security. Furthermore, we include a partial literature survey on the use of nanotechnology in food packaging, food safety, food preservation using smart nanocarriers, the detection of food-borne pathogens and allergens using nanosensors, and crop growth and yield improvement; however, extensive research on nanotechnology is warranted.

Effect of TiO2 Microparticles in Lettuce (Lactuca sativa L.) Seeds and Seedlings

The particle size reduction technology is used in several segments, including sunscreens and new techniques and product improvement. One of the main particles used in the sunscreens formulation is titanium dioxide (TiO2). This formulation allows for better characteristics of these products. Perspectives like incorporation of the particles by other biological systems beyond humans and their effects should be observed. This work aimed to evaluate the titanium dioxide microparticles phytotoxicity on Lactuca sativa L. plants through tests of germination, growth, and weight analysis using microscopy techniques: optical microscopy (OM) and scanning electron microscopy (SEM). Some of the results showed cellular and morphological damage, mainly in the roots and 50 mg L-1 TiO2 concentration, confirmed by SEM. Additionally, anatomical damages like vascular bundle disruption and irregularity in the cortex cells were confirmed by SEM. Additionally, anatomical damages were observed on the three main organs (root, hypocotyl, and leaves) evidenced by the OM. Perspectives to confirm new hypotheses of the interaction of nanomaterials with biological systems are necessary.

Enhanced edible plant production using nano-manganese and nano-iron fertilizers: Current status, detection methods and risk assessment

BACKGROUND

Nanotechnology offers many benefits in the globally important field of food production and human nutrition, particularly by implementing agricultural nanoproducts. Of these, edible plant fertilizers enriched with nanosized forms of essential metals, Mn and Fe, are growing in importance with the advantages of enhanced action on plant roots.

SCOPE AND APPROACH

This review focuses on the importance of tracking the bioaccumulation and biodistribution of these pertinent nanofertilizers. An emphasis is given to the critical analysis of the state-of-the-art analytical strategies to examine the Mn and Fe nanoparticles in edible plant systems as well as to shedding light on the vast gap in the methodologies dedicated to the speciation, in vitro simulation, and safety testing of these promising nanomaterials. Also provided are guidances for the food chemists and technologists on the lights and shadows of particular analytical approaches as a matter of authors' expertise as analytical chemists.

KEY FINDINGS AND CONCLUSIONS

While the use of nanotechnology in agriculture seems to be growing increasingly, there is still a lack of analytical methodologies capable of investigating novel Mn- and Fe-based nanomaterials as potential fertilizers. Only the advent of reliable analytical tools in the field could bridge the gaps in our knowledge about processes in which those materials participate in the plant systems and their effects on crop production and quality of the produced food.

The Mechanism of Manganese Ferrite Nanomaterials Promoting Drought Resistance in Rice

Strategies to reduce the risk of drought damage are urgently needed as intensified climate change threatens agricultural production. One potential strategy was using nanomaterials (NMs) to enhance plant resistance by regulating various physiological and biochemical processes. In the present study, 10 mg kg^-1 manganese ferrite (MnFe₂O₄) NMs had the optimal enhancement to elevate the levels of biomass, photosynthesis, nutrient elements, and polysaccharide in rice by 10.9-525.0%, respectively, under drought stress. The MnFe₂O₄ NMs were internalized by rice plants, which provided the possibility for rice to better cope with drought. Furthermore, as compared with drought control and equivalent ion control, the introduction of MnFe₂O₄ NMs into the roots significantly upregulated the drought-sensing gene CLE25 (29.4%) and the receptor gene NCED3 (59.9%). This activation stimulated downstream abscisic acid, proline, malondialdehyde, and wax biosynthesis by 23.3%, 38.9%, 7.2%, and 26.2%, respectively. In addition, 10 mg·kg^-1 MnFe₂O₄ NMs significantly upregulated the relative expressions of OR1, AUX2, AUX3, PIN1a, and PIN2, and increased IAA content significantly, resulting in an enlarged root angle and a deeper and denser root to help the plant withstand drought stresses. The nutritional quality of rice grains was also improved. Our study provides crucial insight for developing nano-enabled strategies to improve crop productivity and resilience to climate change.

Core-shell micro/nanocapsules: from encapsulation to applications

Encapsulation is the way to wrap or coat one substance as a core inside another tiny substance known as a shell at micro and nano scale for protecting the active ingredients from the exterior environment. A lot of active substances, such as flavours, enzymes, drugs, pesticides, vitamins, in addition to catalysts being effectively encapsulated within capsules consisting of different natural as well as synthetic polymers comprising poly(methacrylate), poly(ethylene glycol), cellulose, poly(lactide), poly(styrene), gelatine, poly(lactide-co-glycolide)s, and acacia. The developed capsules release the enclosed substance conveniently and in time through numerous mechanisms, reliant on the ultimate use of final products. Such technology is important for several fields counting food, pharmaceutical, cosmetics, agriculture, and textile industries. The present review focuses on the most important and high-efficiency methods for manufacturing micro/nanocapsules and their several applications in our life.

Impact of nano-glass (NG) particles on seed germination and it's accumulation in plant parts of wheat (Triticum aestivum L.)

Micro/nano-contaminants have been the focal pollutants in environmental science, which includes several nanomaterials, nanocomposites, fibers, glass, plastics etc. Micro/nano size pollutants are more harmful than macro pollutants due to their size. Therefore, there is an urgent need for research on the possible fate of glass particles in the environment, especially in plant and soil systems. Here, the synthesized nano-glass (NG) from the waste windshield and analyzed its uptake and effect on the wheat (Triticum aestivum L.) plant system in a hydroponic solution. The findings provided direct evidence that NG reduced the germination % with increasing NG concentrations as 100, 96, 92, and 92% for 10, 20, 30, and 40 mg L^-1. The lowest root and shoot height (15.40 and 22.42 cm) was achieved in the 40 mg L^-1 NG treatment. Decrement in fresh and dry wt. with a maximum reduction of chlorophyll a, b and total content (6.19, 4.98, and 11.17 mg g^-1 fresh wt.) was obtained at 40 mg L^-1 at 21 days. Rhodamine B was used for fluorescence imaging in seedlings to detect NG movement, Results showed that NG moves via xylem tissues of root part to other parts of the plant. Based on the currently limited or no data and uncertainty regarding the actual impact of NG on soil and plant systems, suggested considerations to address key knowledge gaps are delineated. Further studies are required as a flora build-up of NG can have both environmental influence and consequences on agronomic sustainability and food safety.

Seed germination studies on Chickpeas, Barley, Mung beans and Wheat with natural biomass and plastic waste derived C-dots

Agronomical providence of nanoparticles in enhancing food productivity has brought new revolution in agricultural sector. However, the comprehensive ingenuity of their synergetic impact on environment and living flora and fauna is still poorly explored. The current study endeavours to tackle this apprehension by systematically exploring the agronomical paradigm of six different types of C-dots derived from natural biomass and plastic waste on the four different types of seeds viz. black chick peas (Cicer arietinum), barley (Hordeum vulgare), mung beans (Vigna radiata) and wheat (Triticum aestivum) at room temperature. C-dots have displayed a dose responsive effect (250 to 5000 mg/L) on the growth of chosen seeds, including the elongation of root length and coleoptile length. The development of seedlings under atmospheric conditions exhibited excellent physiological stability in presence of synthesized C-dots for all types of seeds with concentrations as high as 3000 mg/L for dry seed. The direct exposure of C-dots resulted in enhanced growth as compared to the water exposure and considered as the most important novel aspect of present work. The developed C-dots provide more nutrient content and easy penetration to the seeds due to their enhanced surface area and very small size. The germination and Vigor index have also been augmented in presence of C-dots after 7 days of exposure. C-dots have affected the chlorophyll content in mung beans as a function of time and concentration. The developed C-dots possess excellent biocompatible behaviour and help in the complete growth of the different types of seeds which suggest their enhanced utilization in the agronomical field. This is one of the detailed studies, which explore the impact of C-dots on widely used food crops with the non-toxic and biocompatible C-dots. The information achieved herein will allow the usage of C-dots as a capable nanopriming agent for the natural germination of seeds.

Chitosan nanoparticles and their combination with methyl jasmonate for the elicitation of phenolics and flavonoids in plant cell suspension cultures

Productivity enhancement approaches, such as elicitation can overcome the limitations of low metabolite(s) yield in in vitro plant cell culture platforms. Application of biotic/abiotic elicitors triggers molecular responses that lead to a concomitant enhancement in the production of metabolites. Nanoparticles have been tested as alternatives to commonly studied biotic/abiotic elicitors. However, most nanoparticles explored are of metallic origin, which raises concerns about their cytotoxicity, disposal post-elicitation, and may limit downstream applications of metabolites. Here, we report the synthesis and application of biopolymeric methyl jasmonate-loaded chitosan nanoparticles (MJ-CNPs) and empty CNPs (size <100 nm) as nano-elicitors, which were simple to synthesize, cost-effective and safe. Enzymatic and metabolic investigations revealed that MJ-CNPs and empty CNPs improve and prolong phenylalanine ammonia-lyase enzyme activity and production of phenolics and flavonoids. The data provides the first evidence of MJ-CNPs and empty CNPs as nano-elicitors that prolong the production of metabolites in plant cell suspension cultures.

Alleviative effects of magnetic Fe3O4 nanoparticles on the physiological toxicity of 3-nitrophenol to rice (Oryza sativa L.) seedlings

In the present study, we explored whether magnetic iron oxide nanoparticles (MNPs-Fe3O4) can be used to alleviate the toxicity of 3-nitrophenol (3-NP) to rice (Oryza sativa L.) seedlings grown under hydroponic conditions. The results showed that 3-NP from 7 to 560 μM decreased the growth, photochemical activity of the photosystem II (PS II), and chlorophyll content of the seedlings in a concentration-dependent manner. In the presence of 3-NP, 2,000 mg L−1 MNPs-Fe3O4 were added to the growth medium as the absorbents of 3-NP and then were separated with a magnet. The emergence of MNPs-Fe3O4 effectively alleviated the negative effects of 3-NP on rice seedlings. In addition, the long-term presence of MNPs-Fe3O4 (from 100 to 2,000 mg L−1) in the growth medium enhanced the growth, production of reactive oxygen species (ROS), activities of antioxidant enzymes, photochemical activity of PS II, and chlorophyll content of the rice seedlings. These results suggest that MNPs-Fe3O4 could be used as potential additives to relieve the physiological toxicity of 3-NP to rice seedlings.

Molecular Mechanisms of Early Flowering in Tomatoes Induced by Manganese Ferrite (MnFe2O4) Nanomaterials

Nanomaterials (NMs) have demonstrated enormous potential to improve agricultural production. Ten mg L^-1 of customized manganese ferrite (MnFe₂O₄) NMs was selected as the optimal dose based on its outstanding effects on promoting tomato flowering and production. After the foliar application before flowering, MnFe₂O₄ NMs increased the leaf chlorophyll content by 20 percent, and significantly upregulated the expressions of ferredoxin, PsaA, and PsbA in leaves, likely by serving as an electron donor, leading to a significant increase in photosynthesis efficiency by 13.3%. Long distance transport of sucrose was then confirmed by the upregulation of sucrose transporter SUT1 and SUT2 in NM-treated leaves and meristems. The genes associated with gibberellin biosynthesis, including GA20ox2, GA20ox3, and SIGAST, and a flowering induction gene SFT, were also significantly upregulated. Importantly, the flowering time was 13 days earlier by MnFe₂O₄ NMs over the control. At the reproductive stage, MnFe₂O₄ NMs increased pollen activity and ovule size, leading to the significant increase in fruit number per plant, single fruit weight, and fruit weight per plant by 50%, 30%, and 75%, respectively. Metabolically, a significant increase of glucose-6-phosphate, phenylalanine, rutin, and ascorbic acid (vitamin C), as well as a significant decrease of tomatine and methionine, demonstrates an increased nutritional value of the tomato fruits. A verified companion field experiment showed an increase of 84.1% in total tomato production with the MnFe₂O₄ NM amendment. These findings provide support for the early flowering and yield improvement in nano-enabled agricultural systems.

Water splitting by MnFe2O4/Na2CO3 reversible redox reactions

Investigating H2 production by MnFe2O4/Na2CO3/H2O redox cycles, using different reactants. Using the more efficient coprecipitated reactant, production costs will be ∼1€ per kg H2, if 120 cycles are achieved. Improving the cheaper ball-milled reactant is recommended.

Ce-Mn ferrite nanocomposite promoted the photosynthesis, fortification of total yield, and elongation of wheat (Triticum aestivum L.)

Recent advances in nano-enabled agriculture raised hope in the efficient delivery of bioactive minerals to crops. Nanocomposites (NCPs) are promising technologies in soil fertilizing without compromising environmental contamination. NCPs have shown positive impacts on plant growth and nanofortification of crop yield. Here, we have synthesized a nanocomposite that could induce the positive impacts of the Mn, Fe, and Ce nanoparticles for the crops. The NCPs were extensively characterized and applied at three levels 100, 250, and 500 ppm on T. aestivum L. seeds for 10 days. The germination, biomass, and elongation have been measured as the main physiological parameters of the plant. The total content of chlorophyll, carotenoids, and enzymatic and non-enzymatic antioxidant in response to NCPs was quantified. The concentration of essential minerals (iron and manganese) and the non-essential element of cerium in roots and shoots were quantified using inductively coupled plasma mass spectrometry (ICP-MS). Briefly, the germination rate increased by 15%; total chlorophyll and carotenoid were augmented by 61% and 38%, respectively, in exposure to 100 ppm. Higher uptake of micronutrient Fe and Mn in shoots and led to higher yield production by 14% and 18%, respectively. A positive correlation between the increasing dose of NCPs and the total content of the superoxide dismutase (SOD), and peroxidase (POD) were quantified. Overall, the results indicate the high potential of NCPs applications in agricultural practice.

Responses of Moringa oleifera to alteration in soil properties induced by calcium nanoparticles (CaNPs) on mineral absorption, physiological indices and photosynthetic indicators

Background

The application of nanofertilisers in agriculture has been widely utilised due to their distinct characteristics and negative impacts of conventional chemical fertilisers. This study thus examined the influence of calcium nanoparticles (CaNPs) on soil composition vis-à-vis performance parameters in Moringa oleifera L exposed to water, 100 mg Ca(NO3)2kg−1 soil and 100, 75 and 50 mg CaNPs kg−1 soil. Soil morphology was determined with a scanning electron microscope coupled with energy dispersive x-ray (SEM-EDX) and elemental composition in both soils and M. oleifera roots determined with inductively coupled plasma-optical emission spectrometer (ICP-OES).

Results

The CaNP-amended soils were more crystalline, more fertile and had reduced salinity. An increase in immobilisation percentage of heavy metals, improvement in physiological parameters (percentage germination, vigour indices, relative water contents, lengths of roots and shoots) and photosynthetic efficiency in M. oleifera were recorded.

Conclusion

This study has demonstrated that CaNPs could improve soil composition for better plant performance and can act as nanofertilisers mobilising essential nutrients.

Graphical abstract

Delivery, fate and physiological effect of engineered cobalt ferrite nanoparticles in barley (Hordeum vulgare L.)

Cobalt ferrite nanoparticles (CoFe₂O₄ NPs) have received increasing attention in a widespread application. This work examines the fate and impact of terbium (Tb) substituted CoFe₂O₄ NPs on the growth, physiological indices, and magnetic character of barley (Hordeum vulgare L.). Sonochemically synthesized NPs were hydroponically applied on barley with changing doses (125-1000 mg/L) at germination and seedling (three weeks) stages. Results revealed a significant reduction in germination rate (∼37% at 1000 mg/L); however, a remarkable growth (∼38-65%) and biomass (∼72-133%) increase were detected at three weeks of exposure (p < 0.05). The elements that make up the NPs (i.e., Tb, Co, and Fe) increased significantly in both root and leaf tissues, indicating the translocation of NPs from the root to leaf. Vibrating-sample magnetometer (VSM) analysis confirmed this finding, where magnetic signals in the root and leaf samples of the control were respectively about 26 and 75 times lower than that of NPs-treated tissues. Also, the accumulation of NPs altered the leaf photoluminescence (PL) behavior, which may have contributed to the biomass increase. Overall, Tb-doped CoFe₂O₄ NPs translocate from root-to-leaf and enhance plant growth, possibly due to i) incorporation of iron within tissues, and ii) changes in photoluminescence. However, since its effects on other living things are not known yet, its agricultural use and release to nature should be considered well.

Uptake, translocation, and physiological effects of hematite (α-Fe2O3) nanoparticles in barley (Hordeum vulgare L.)

There has been a growing concern with the environmental influences of nanomaterials due to recent developments in nanotechnology. This study investigates the impact and fate of hematite nanoparticles (α-Fe₂O₃ NPs) (∼14 nm in size) on a crop species, barley (Hordeum vulgare L.). For this purpose, hematite NPs (50, 100, 200, and 400 mg/L) were hydroponically applied to barley at germination and seedling stages (three weeks). Inductively coupled plasma mass spectrophotometry (ICP-MS) along with vibrating sample magnetometer (VSM) techniques were used to track the NPs in plant tissues. The effects of NPs on the root cells were observed by scanning electron microscopy (SEM) and confocal microscopy. Results revealed that α-Fe₂O₃ NPs significantly reduced the germination rate (from 80% in control to 30% in 400 mg/L), as well as chlorophyll (36-39%) and carotenoid (37%) contents. Moreover, the treatment led to a significant decline in the quantum yield of photosystem II (Fv/Fm). Leaf VSM analysis indicated a change in magnetic signal for NPs-treated samples compared with untreated ones, which is mostly attributed to the iron (Fe) ions incorporated within the leaf tissue. Besides, Fe content in the roots and leaf had gradually increased by the increasing doses of NPs, which was confirming NPs' translocation to the aerial parts. Microscopic observations revealed that α-Fe₂O₃ NPs altered root cell morphology and led to the injury of cell membranes. This study, in the light of our findings, shows that α-Fe₂O₃ NPs (∼14 nm in size) are taken up by the roots of the barley plants, and migrate to the plant leaves. Besides, NPs are phytotoxic for barley as they inhibit germination and pigment biosynthesis. This inhibition is probably due to the injury of the cell membranes in the roots. Therefore, the use of hematite NPs in agriculture and thereby their environmental diffusion must be addressed carefully.

Engineered magnetic nanoparticles enhance chlorophyll content and growth of barley through the induction of photosystem genes

This study investigates the impact of an engineered magnetic nanoparticle (MNP) on a crop plant. For this purpose, a sonochemical synthetic approach was utilized in order to dope magnetic elements (Co and Nd) into technologically important iron oxide NPs. After being characterized by using TEM, SEM, and XRD instruments, the MNPs were hydroponically applied to barley plants with varying doses (from 125 to 1000 mg/L) both in germination (4 days) and early growing stages (3 weeks). Physiological responses, as well as expression of photosystem marker genes, were assessed. Compared to the untreated control, MNP treatment enhanced germination rate (~ 31%), tissue growth (8% in roots, 16% in shoots), biomass (~ 21%), and chlorophyll (a, b) (~ 20%), and carotenoids (~ 22%) pigments. In general, plants showed the highest growth enhancement at 125 or 250 mg/L treatment. However, higher doses diminished the growth indices. Compared to the control, the catalase activity was significantly reduced in the leaves (~ 33%, p < 0.005) but stimulated in the roots (~ 46%, p < 0.005). All tested photosystem marker genes (BCA, psbA, and psaA) were overexpressed in MNP-treated leaves than non-treated control. Moreover, the gene expressions were found to be proportionally increased with increasing MNP doses, indicating a positive correlation between MNPs and the photosynthetic machinery, which could contribute to the enhancement of plant growth.

Chlorophyll hormesis: Are chlorophylls major components of stress biology in higher plants?

High oxidative stress inhibits the synthesis and accumulation of chlorophylls, the pigments that absorb and use light. We collated evidence from a diverse array of studies demonstrating that chlorophyll concentration increases in response to low-level stress and decreases in response to high-level stress. These observations were from 33 species, >20 stress-inducing agents, 43 experimental setups and 177 dose responses, suggesting generality. Data meta-analysis indicated that the maximum stimulatory response did not differ significantly among species and agents. The stimulatory response maximized within a defined time window (median = 150-160% of the control response), after which it decreased but remained elevated (median = 120-130% of control response). The common stimulation of chlorophylls by low-level stress indicates that chlorophylls are major components of stress biology, with their increased concentration at low-level stress suggestive of their requirement for normal functioning and health. Increased chlorophyll concentration in response to low-level stress may equip systems with an enhanced capacity for defense against high-level (health-threatening) challenges within defined time windows, such as pollution or herbivores. These developments have wide-ranging implications in ecophysiology, biotic interactions and evolution.

A water resistance magnetic graphene-anchored zeolitic imidazolate framework for efficient adsorption and removal of residual tetracyclines in wastewater

Water-resistant magnetic graphene-anchored zeolite imidazolate (Fe₃O₄/ZIF-8-G) composite materials with the largest surface area are formed by directly growing a hydrophobic ZIF-8 skeleton onto a graphene support through self-assembly in methanol. Fe₃O₄/ZIF-8-G hybrid composite has water resistance and super strong adsorption capacity, and is used as an effective adsorbent for adsorption and removal of residual tetracycline in wastewater. The morphologies and structure, as well as water resistance of Fe₃O₄/ZIF-8-G, were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetry analysis (TGA), N₂ adsorption and pH_PZC. The adsorption for tetracycline (TC), oxytetracycline (OTC) and chlortetracycline (CTC) followed pseudo-second-order kinetics and fitted the Freundlich adsorption model with the simultaneous adsorption capacity for TC (382.58 mg g^-1), OTC (565.94 mg g^-1) and CTC (608.06 mg g^-1) at pH 5-6 for 10 h. These were much higher than previously reported results for the removal of tetracycline from aqueous solutions. The used Fe₃O₄/ZIF-8-G could be effectively reused and recycled at least five times without significant loss of adsorption capacity. The hydrophobic and π-π interaction between the aromatic rings of TCs and the aromatic imidazole rings of the ZIF-8-G framework were the main adsorption mechanism on the surface of Fe₃O₄/ZIF-8-G. Constructing a hydrophobic surface of ZIF-8/G framework resulted in a reduction of the hydrophilic sites of the surface. This can improve stability and selective adsorption of ZIF-8-G framework. In addition, the results show no significant difference in the adsorption kinetics and adsorption capacity of Fe₃O₄/ZIF-8-G for TC, OTC and CTC in pure water and wastewater.

Size effect of iron (III) oxide nanomaterials on the growth, and their uptake and translocation in common wheat (Triticum aestivum L.)

Nanomaterials (NMs) have emerged in the last decades and are used in many disciplines such as industry, material sciences, biomedicine, biotechnology, bioenergy, and agriculture. The size of the NMs is a critical factor that affects NMs' integration and transfer into the biological systems. Therefore, this study aims at investigating the effect of NMs-size on i) plant growth and physiology, and ii) NMs uptake and translocation in plant tissues. For these purposes, iron (III) oxide (Fe₂O₃) NMs with varied sizes, 8-10, 20-40, and 30-50 nm, have been applied to wheat plants in a hydroponic system. Results showed that Fe₂O₃ NMs enhanced root length, plant height, biomass, and chlorophyll content of wheat. Confocal microscopy analysis indicated that Fe₂O₃ NMs cause injury in root-tip cells without a visible toxic symptom. Vibrating sample magnetometer (VSM), and inductively coupled plasma-mass spectroscopy (ICP-MS) analyses of leaf tissues revealed that all tested NMs were up taken by wheat plant and translocated to the leaves. Iron content was found to be dramatically increased in NMs-treated plant tissues, which possibly contributed to the growth enhancement. Experiments confirmed that Fe₂O₃ NMs with 20-40 nm size is much more efficient in plant growth compared to those with 8-10 and 30-50 nm size. Overall, Fe₂O₃ NMs with 20-40 nm in size could be proposed as a nano-fertilizer for agricultural applications. On the other hand, the translocation of NMs in the wheat plant requires further investigation of their effects on the end users.

Impact of calcium and magnesium substituted strontium nano-hexaferrite on mineral uptake, magnetic character, and physiology of barley (Hordeum vulgare L.)

In this study, calcium and magnesium substituted strontium nano-hexaferrites (Sr_0.96Mg_0.02Ca_0.02Fe₁₂O₁₉, SrMgCa nano-HF) were synthesized by the sol-gel auto-combustion method and their impact on the nutrient uptake, magnetic character and physiology of barley (Hordeum vulgare L.), a crop plant, was investigated. Structural, microstructural, and magnetic properties of nano-HF were evaluated by using vibrating sample magnetometry (VSM), X-ray diffraction (XRD), scanning electron microscopy (SEM) along with energy-dispersive X-ray (EDX) and elemental mapping techniques. Plants were hydroponically exposed to nano-HF (ranging from 125 to 1000 mg/L) for three weeks. Results showed that the SrMgCa nano-HF application enhanced germination rate (about 20%), tissue growth (about 38%), biomass (about 20%), soluble protein content (about 41%), and chlorophyll pigments (about 33-42%) when compared to the untreated control. In general, the plants showed the highest growth achievement at 125 or 250 mg/L of nano-HF treatment. However, higher doses diminished the growth parameters. Element concentrations and magnetic behavior analyses of plant parts proved that SrMgCa nano-HF with a size of 42.4 nm are up-taken by the plant roots and lead to increase in iron, calcium, magnesium, and strontium contents of leaves, which were about 20, 18, 3, and 60 times higher in 500 mg/L nano-HF-treated leaves than those of control, respectively. Overall, this study shows for the first time that the four elements have been internalized into the plant body through the application of substituted nano-HF. These findings suggest that mineral-substituted nanoparticles can be incorporated into plant breeding programs for the i) enhancement of seed germination and ii) treatment of plants by fighting with mineral deficiencies.

Sonochemical synthesis and physical properties of Co0.3Ni0.5Mn0.2EuxFe2-xO4 nano-spinel ferrites

Nanoparticles (NPs) of composition Co_0.3Ni_0.5Mn_0.2Eu_xFe_2-xO₄, where 0.00 ≤ x ≤ 0.10 (hereafter called CNMEuF) were synthesized by sonochemical approach using UZ SONOPULS HD 2070 ultrasonic homogenizer (frequency of 20 kHz and power of 70 W). As-synthesized samples were characterized thoroughly to determine the effects of europium ions (Eu³⁺) substitution on their structure, morphology and magnetic traits. Structural analyses of the synthesized NPs confirmed their high purity and crystalline cubic phases. Percent diffuse reflectance (%DR) data and Kubelka-Munk theory were exploited to evaluate the optical band gap energies of the studied CNMEuF NPs. Values of optical band gap energies obtained from the Tauc plots were observed in the range of 1.47-1.58 eV. The hysteresis loops (at room temperature and 10 K) of synthesized NPs were analyzed to determine their magnetic properties. These NPs disclosed superparamagnetic and hard ferrimagnetic character at room temperature and 10 K, respectively. With exception, the sample with x = 0.10 revealed soft ferrimagnetic behavior at 10 K. Eu³⁺ doping was shown to have significant influence on the structure and magnetic attributes of the proposed CNMEuF NPs. Values of various magnetic parameters of proposed compositions were reduced with the increase in Eu³⁺ dopant contents.

The two faces of nanomaterials: A quantification of hormesis in algae and plants

The rapid progress in nanotechnology has dramatically promoted the application of engineered nanomaterials in numerous sectors. The wide application of nanomaterials and the potential accumulation in the environment sparked interest in studying the effects of nanomaterials on algae and plants. Hormesis is a dose response phenomenon characterized by a biphasic dose response with a low dose stimulation and a high dose inhibition. This paper quantifies for the first time nanomaterial-induced hormesis in algae and plants. Five hundred hormetic concentration-response relationships were mined from the published literature. The median maximum stimulatory response (MAX) was 123%, and commonly below 200%, of control response. It was also lower in algae than in plants, and occurred commonly at concentrations <100 mg L^-1. The no-observed-adverse-effect-level (NOAEL) to MAX ratio was 2.4 for algae and 1.7 for plants, and the two distributions differed significantly. Ag nanoparticles induced higher MAX than TiO₂ and ZnO nanoparticles. The MAX varied upon nanomaterial application methods, growth stage of application (seed versus vegetative), type of endpoint and time window. While nanomaterial size did not affect significantly the MAX, sizes ≤50 nm appeared to have lower NOAEL:MAX ratio than sizes ≥100 nm, suggesting higher risks from incorrect application. The mechanisms underlying nanomaterial-induced hormetic concentration responses are discussed. This paper provides a strong foundation for enhancing research protocols of studies on nanomaterial effects on algae and plants as well as for incorporating hormesis into the risk assessment practices.

Structural, magnetic, optical properties and cation distribution of nanosized Ni0.3Cu0.3Zn0.4TmxFe2-xO4 (0.0 ≤ x ≤ 0.10) spinel ferrites synthesized by ultrasound irradiation

In this study, Tm³⁺ ion substituted NiCuZn nanospinel ferrites, Ni_0.3Cu_0.3Zn_0.4Tm_xFe_2-xO₄ (0.0 ≤ x ≤ 0.10), have been synthesized sonochemically. The structural, spectroscopic, morphological, optic and magnetic investigation of the samples were done by X-ray powder diffractometry (XRD), Fourier transform infrared spectrophotometry (FT-IR), UV-Vis diffused reflectance (%DR) spectrophotometry, transmission and scanning electron microscopies (TEM and SEM) along with EDX, Vibrating sample magnetometry (VSM), respectively. The purity of prepared products were confirmed via XRD, FT-IR, EDX and elemental mapping analyses. The analyses of magnetization versus M(H) (applied magnetic field) were performed at 300 and 10 K. The following magnetic parameters like M_s (saturation magnetization), SQR = M_r/M_s (squareness ratio), n_B(magnetic moment), H_c (coercivity) and M_r (remanence) have been discussed. M(H) loops revealed superparamagnetic property at RT and soft ferromagnetic nature at 10 K. It is showed that the Tm³⁺ substitutions significantly affect the magnetizations data. A decreasing trend in the M_s, H_c, M_r, and n_B values was detected with Tm³⁺ substitution.

Uptake and translocation of magnetite (Fe3O4) nanoparticles and its impact on photosynthetic genes in barley (Hordeum vulgare L.)

This study investigates the fate and impact of iron oxide or magnetite (Fe₃O₄, ∼13 nm in size) nanoparticles (NPs) in barley (Hordeum vulgare L.), a common crop cultivated around the world. Barley seedlings were grown in hydroponic culture for three weeks to include NPs (125, 250, 500, and 1000 mg/L). Transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) techniques were used to assess their uptake and translocation. Photosynthesis marker genes were quantified by RT-qPCR. Results revealed that increasing doses of Fe₃O₄ NPs were gradually enhanced the plant growth up to 500 mg/L, which promoted the fresh weight (FW) respectively ∼19% and ∼88% for leaf and root tissues than the ones for control. No phytotoxic effect was recorded even at high NPs doses. NPs inclusion increased some phenological parameters such as chlorophyll, total soluble protein, number of chloroplasts, and dry weight. High NPs doses dramatically reduced the catalase activity and hydrogen peroxide content, suggesting a possible function of NPs as nanozyme in vivo. TEM observations showed that Fe₃O₄ NPs penetrated and internalized in the root cells. In leaves, they were mostly existed at the surrounding cell wall, suggesting their translocation from root to shoot without cellular penetration. Further analysis by using VSM confirmed the existence of Fe₃O₄ NPs in leaves which result in dramatic alterations of the photosystem genes (PetA, psaA, BCA and psbA). In conclusion, barley plants uptake and translocate Fe₃O₄ NPs, which promoted the plant growth probably due to the promoted gene expression and efficient photosynthetic activity.

Impact of superparamagnetic iron oxide nanoparticles (SPIONs) and ionic iron on physiology of summer squash (Cucurbita pepo): A comparative study

This study investigates the effect of SPIONs (superparamagnetic iron oxide nanoparticles, ∼12.5 nm in size) on summer squash plant (Cucurbita pepo) in the presence and absence of supplementary iron (Fe(II)-EDTA). The plants were grown in nutrient solution with different iron sources: (i) Fe(II)-EDTA, (ii) without Fe(II)-EDTA (iii) SPIONs only, and (iv) Fe(II)-EDTA with SPIONs. Plant growth and development were assessed after 20 days of soaking by measuring phenological parameters such as plant biomass, chlorophyll content, amount of carotenoids, and the catalase enzyme activity. Transmission electron microscopy, inductively coupled plasma atomic emission spectroscopy, X-ray diffraction, and vibrating sample magnetometer methods were used to detect uptake and translocation of SPIONs in plant tissues. Our results showed that SPIONs treatment (without Fe(II)-EDTA) caused growth retardation and decreased the plant biomass and chlorophyll content. Hence, they are not efficient sources to compensate for iron demand of squash plant. Electron microscopy observations, magnetization and elemental analyses revealed that SPIONs are taken-up by plant roots but not translocate to upper organs. In roots, SPIONs use a symplastic route for intercellular transfer. These findings suggest that as an iron source, SPIONs alone are not efficient for plant growth, but can contribute it together with Fe(II)-EDTA.

Structural, optical and magnetic properties of Tm3+ substituted cobalt spinel ferrites synthesized via sonochemical approach

Co-Tm nano-spinel ferrite with chemical formula CoTm_xFe_2-xO₄ (0.0 ≤ x ≤ 0.08) NPs were prepared via sonochemical approach. X-ray powder diffraction patterns, microscopic images (SEM and TEM) and infrared spectra proved the formation of Co spinel ferrite. The effect of Tm³⁺ substituted on spinal structure was evaluated by lattice parameters, tetrahedral and octahedral bond length and cationic distribution. The band gap energy (Eg) of samples were estimated by performing UV-Vis percent diffuse reflectance (% DR) and applying the Kubelka-Munk theory. Eg values are in an interval between 1.33 eV and 1.64 eV. The analyses of magnetization were performed at room (300 K; RT) and low (10 K) temperatures. Different magnetic parameters including coercivity H_c, saturation magnetization M_s, remanence M_r, squareness ratio (SQR = M_r/M_s) and magnetic moment n_B were deduced and discussed. The results showed superparamagnetic (SPM) nature at RT for x = 0.00 and 0.02 samples. However, the other products exhibit ferromagnetic (FM) nature. At 10 K, all synthesized NPs display FM behavior. An amazing increase in the magnitudes of M_s, M_r and H_c was observed at 10 K in comparison to RT, which is principally due to the reduced thermal fluctuations of magnetic moments at lower temperatures. The Tm³⁺ substitution affects considerably the magnetizations data. An enhancement in the M_s, M_r, and n_B was detected on increasing the Tm³⁺ concentration. The SQR values at RT are found to be smaller than 0.5 postulating a single domain nature with uniaxial anisotropy for all produced ferrites. However, SQRs are in the range 0.66-0.76 at 10 K, suggesting the multi magnetic domain at low temperature, except the x = 0.02 product where the SQR = 0.47 indicating the single magnetic domain. The obtained magnetic results were investigated deeply with relation to structural and microstructural properties.

The impacts of γ-Fe2O3 and Fe3O4 nanoparticles on the physiology and fruit quality of muskmelon (Cucumis melo) plants

Iron fertilizers are worthy to be studied due to alleviate the Fe deficiency. Different forms of iron oxide nanoparticles are selected to better understand possible particle applications as an Fe source for crop plants. In this study, we assessed the different effects of γ-Fe₂O₃ and Fe₃O₄ NPs on the physiology and fruit quality of muskmelon plants in a pot experiment for five weeks. Results showed that no increased iron content was found under NPs treatment in root, stem, leaf and fruit, except 400 mg/L Fe₃O₄ NPs had a higher iron content in muskmelon root. With the extension of NPs exposure, both γ-Fe₂O₃ and Fe₃O₄ NPs began to promote plant growth. In addition, γ-Fe₂O₃ and Fe₃O₄ NPs could increase chlorophyll content at a certain stage of exposure. Happily, 200 mg/L γ-Fe₂O₃ NPs and 100, 200 mg/L Fe₃O₄ NPs significantly increased fruit weight of muskmelon by 9.1%, 9.4% and 11.5%. It is noteworthy that both γ-Fe₂O₃ and Fe₃O₄ NPs caused positive effects on VC content, particularly 100 mg/L Fe₃O₄ NPs increased the VC content by 46.95%. To the best of our knowledge, little research has been done on the effect of nanoparticles on the whole physiological cycle and fruit quality of melon. The assessment of physiology and fruit quality of muskmelon plants in vitro upon γ-Fe₂O₃ and Fe₃O₄ NPs exposure could lay a foundation for NPs potential impact at every growth period of muskmelon plants.

Genome-wide identification and expression analysis of R2R3, 3R- and 4R-MYB transcription factors during lignin biosynthesis in flax (Linum usitatissimum)

MYB transcription factors (TFs) have vital roles in regulating lignin or fiber development. Flax (Linum usitatissimum) is known as one of the plants with high fiber production capacity. However, no studies have been conducted to identify and characterize MYB TFs in the flax genome. Results showed that flax genome harbours 167 R2R3, seven 3R, and one 4R-type MYB TFs. 22 MYB genes (%13) were estimated to be tandem duplicated dated around 13.3-86.98 Mya. 130 flax MYB members have apparent orthologous with Arabidopsis, in which 17 R2R3 MYBs are associated with lignin biosynthesis. MYB062, MYB072, MYB096, MYB141, and MYB146 genes were up-regulated in tissues having higher lignin production capacity. In opposite, MYB012 and MYB113 genes were down-regulated which points out the involvement of those genes in the lignin biosynthesis mechanism. This comprehensive study can provide a basis for understanding the role of MYBs in fiber or lignin production in flax.