Effects of accelerated aging on characteristics, leaching, and toxicity of commercial lead chromate pigmented microplastics

Single and combined effect of polyethylene microplastics (virgin and naturally aged) and cadmium on pakchoi (Brassica rapa subsp. chinensis) under different growth stages

To protect agro-systems and food security, study on the effect of microplastics and heavy metals on edible plants is of great significance. Existing studies mostly used virgin microplastics to evaluate their effects on plants, effects of naturally aged microplastics and their combined effects with heavy metals are rarely explored. In this study, single and combined effect of polyethylene microplastics (PE, both virgin and naturally aged) and cadmium (Cd) on pakchoi under seedling and mature stages were analyzed from perspectives of growth inhibition, oxidative damage, nutrition content and soil enzyme activities. Results showed that inhibiting effects of naturally aged PE (PEa) on the growth of pakchoi were stronger than virgin PE (PEv), whereas co-contamination of PEa and Cd was less toxic than that of PEv and Cd. The co-contamination of PE and Cd could inhibit pakchoi dry biomass by over 85 %. Both single and combined contamination of PE and Cd promoted soil fluorescein diacetate hydrolase (FDA) activities, which were 1.11 to 2.04 times of that in control group. Soluble sugar contents under co-contamination of PEa and Cd were 14 % to 22 % higher than those in control group. PEa and PEv showed different effects on oxidative damage of pakchoi. Compared with PEv, catalase (CAT) activities were more sensitive with PEa, whereas PEa had lower effect on superoxide dismutase (SOD) activities. The response of pakchoi to PE and Cd changed with growth stage. Chlorophyll contents in pakchoi under seedling stage were generally higher than those under mature stage. For Cd contaminated soils, PE benefited pakchoi growth under seedling stage, i.e. antagonistic effect between Cd and PE but hindered their growth under mature stage, i.e. synergistic effect. The results unraveled here emphasized PE, especially PEa, could trigger negative effects on agro-systems, whereas PE could be beneficial for heavy metal contaminated agro-systems under specific situations.

Unravelling the influence of microplastics with/without additives on radish (Raphanus sativus) and microbiota in two agricultural soils differing in pH

Here we investigated the effects of three types of microplastics (MPs), i.e., PS (P), ABS (B), PVC (V), and each with additive (MPAs) (PA, BA, and VA), on soil health, microbial community, and plant growth in two acidic and slightly alkaline soils. Incubation experiment revealed that although MPs and MPAs consistently stimulated soil nutrients and heavy metals (e.g., Mn, Cu) in weakly alkaline soils, only BA and VA led to increase in soil nutrients and heavy metals in acidic soils. This suggests distinct response patterns in the two soils depending on their initial pH. Concerning microorganisms, MPs and MPAs reduced the assembly degree of bacteria in acidic soils, with a reduction of Chloroflexi and Acidobacteriota but an increase of WPS-2 in VA. Culture experiment showed consistent positive or negative responses in radish seed germination, roots, and antioxidant activity across MPs and MPAs types in both soils, while the responses of seed heavy metals (e.g., Cr, Cd) were consistent in acidic soils but dependent on MPs and MPAs types in alkaline soils. Therefore, our study strongly suggests that the effects of MPs on soil-microbial-plant systems were highly dependent on initial soil characteristics and the types of MPs with plastic additives.

How micro-/nano-plastics influence the horizontal transfer of antibiotic resistance genes - A review

Plastic debris such as microplastics (MPs) and nanoplastics (NPTs), along with antibiotic resistance genes (ARGs), are pervasive in the environment and are recognized as significant global health and ecological concerns. Micro-/nano-plastics (MNPs) have been demonstrated to favor the spread of ARGs by enhancing the frequency of horizontal gene transfer (HGT) through various pathways. This paper comprehensively and systematically reviews the current study with focus on the influence of plastics on the HGT of ARGs. The critical role of MNPs in the HGT of ARGs has been well illustrated in sewage sludge, livestock farms, constructed wetlands and landfill leachate. A summary of the performed HGT assay and the underlying mechanism of plastic-mediated transfer of ARGs is presented in the paper. MNPs could facilitate or inhibit HGT of ARGs, and their effects depend on the type, size, and concentration. This review provides a comprehensive insight into the effects of MNPs on the HGT of ARGs, and offers suggestions for further study. Further research should attempt to develop a standard HGT assay and focus on investigating the impact of different plastics, including the oligomers they released, under real environmental conditions on the HGT of ARGs.

Evaluation of antibiofilm activity of metal oxides nanoparticles and carbon nanotubes coated styrofoam on the bacterium Jeotgalicoccus huakuii

The co-existence of metal oxide nanoparticles (MONPs), carbon-based nanomaterials and microplastics (MPs) in the natural environment are expected to be of growing global concern due to their increasing abundance and persistence in the environment worldwide. Knowledge of the interaction of the above compounds particularly under light irradiation in water remains limited. In the present study, the possible individual and combined toxic effects of MONPs, carbon nanotubes (CNTs) through styrofoam (SF) on the environmental bacterium Jeotaglicoccus huakuii were systematically investigated. The fabricated MONPs and CNTs were characterized using the following techniques: FT-IR (functional groups), XRD (crystallinity), SEM, and EDX (topological morphology). The objective of this study was to investigate and identify naturally occurring bacteria capable of mitigating and detoxifying toxic pollutants under adverse conditions. Moreover, the assessment of minimum inhibitory concentration (MIC) was made through an agar well plate method, resazurin (ELISA measurement), growth kinetics and bacterial viability were assessed employing live and dead assay and biofilm combating ability was analyzed using an antibiofilm assay. Further, the biotransformation of f-MWCNTs by J. huakuii was evaluated employing RT-PCR and SEM analysis. The results demonstrated that the toxicity of Pb3O4@f-MWCNTs was comparatively higher than the remaining Pb3O4 NPs and SF coated NPs.. Interestingly, J. huakuii showed resistance against f-MWCNTs at very high concentrations and able to utilize f-MWCNTs as a sole carbon source suggesting J. huakuii as a suitable aquatic bioremediation tool for both MONPs and CNTs transfer via MPs. The results also enhanced our understanding of the affinity of MPs towards MONPs and CNTs under extreme environmental conditions.

Genotoxicity and metabolic changes induced via ingestion of virgin and UV-aged polyethylene microplastics by the freshwater fish Perca fluviatilis

The present study aims to compare and assess the toxicity induced by aged (irradiated with ultraviolet radiation for 120 days) polyethylene microplastics (PE-MPs) in comparison to virgin (non-irradiated) ones, after feeding the freshwater fish Perca fluviatilis. To this end, MPs mediated genotoxicity was assessed by the investigation of micronucleus nuclear abnormalities frequency in fish blood, and the degree of DNA damage in the liver and muscle tissues, while metabolic alterations were also recorded in both tissues. Results showed that both virgin and aged PE-MPs induced signaling pathways leading to DNA damage and nuclear abnormalities, as well as metabolites changes in all tissues studied. Metabolic changes revealed that the metabolism of nucleic acids, energy, amino acids, and neurotransmitters was more disrupted in the liver and by aged PE-MPs compared to muscles. Fish fed with aged PE-MPs exhibited greater DNA damage, while blood cells of fish fed with virgin PE-MPs seemed to be more vulnerable to nuclear abnormalities in relation to those fed with aged PE-MPs. Moreover, aged PE-MPs induced more acute overall effects on the metabolic profiles of fish tissues, and initiated stronger stress responses, inflammation, and cellular damages in fish tissues in relation to virgin ones. Characterization of both virgin and aged MPs revealed that the latter exhibited lower crystallinity and melting point, more irregular shapes and higher moiety of oxygen and carbonyl groups, which could be attributed for their observed higher toxicity. The research outcomes provide significant insights for advancing toxicological investigations in this field.

A Comparative Study on the Interaction Between Protein and PET Micro/Nanoplastics: Structural and Surface Characteristics of Particles and Impacts on Lung Carcinoma Cells (A549) and Staphylococcus aureus

The interaction between particles and proteins is a key factor determining the toxicity responses of particles. Therefore, this study aimed to examine the interaction between the emerging pollutant polyethylene terephthalate micro/nanoplastics from water bottles with bovine serum albumin. The physicochemical characteristics of micro/nanoplastics were investigated using nuclear magnetic resonance, x-ray diffraction, Fourier transform infrared, dynamic light scattering, and x-ray energy dispersive spectroscopy after exposure to various concentrations and durations of protein. Furthermore, the impact of protein-treated micro/nanoplastics on biological activities was examined using the mitochondrial activity and membrane integrity of A549 cells and the activity and biofilm production of Staphylococcus aureus. The structural characteristics of micro/nanoplastics revealed an interaction with protein. For instance, the assignment of protein-related new proton signals (e.g., CH2, methylene protons of CH2O), changes in available protons s (e.g., CH and CH3), crystallinity, functional groups, elemental ratios, zeta potentials (-11.3 ± 1.3 to -12.4 ± 1.7 to 25.5 ± 2.3 mV), and particle size (395 ± 76 to 496 ± 60 to 866 ± 82 nm) of micro/nanoplastics were significantly observed after protein treatment. In addition, the loading (0.012-0.027 mM) and releasing (0.008-0.013 mM) of protein also showed similar responses with structural characteristics. Moreover, the cell-based responses were changed regarding the structural and surface characteristics of micro/nanoplastics and the loading efficiencies of protein. For example, insignificant mitochondrial activity (2%-10%) and significant membrane integrity (12%-28%) of A549 cells increased compared with control, and reductions in bacterial activity (5%-40%) in many cases and biofilm production specifically at low dose of all treatment stages (13%-46% reduction) were observed.

Study on the effect of different contact times on the migration of heavy metals into different foodstuffs served in plastic cups

Heavy metal concentrations of Pb, Cd, Cr, and Cu leaching from single-use plastic cups were identified, and the risks associated with them were assessed in real time (up to 10 min). All samples (tea, carbonated beverage, and lassi) were placed in disposable plastic cups and held for less than 1 min, 5 min, and 10 min, respectively. Prior to digestion, the solids were ashed in a muffle furnace at 550 °C for 30 min. The filtrates were then tested for heavy metals. The samples were all confirmed to be contaminated with heavy metals. Heavy metals leached from the plastic cups in the following order: Cu > Pb > Cr > Cd. The samples' HI values were less than one, hence there was no evidence of a non-carcinogenic risk. The ILCR values for this heavy metal contamination in samples exceed 10-3, indicating a high carcinogenic risk. Lassi poses the highest possible carcinogenic risk. A rise in temperature and a drop in pH also resulted in heavy metal migration. Heavy metal leaching from plastic cups poses a serious health risk due to its toxicity. The proposed legislation should prohibit or restrict the serving of warm and hot beverages in plastic cups.

Insights into the effect of crystallinity on the sorption of organic pollutants to microplastics

The environmental behavior of microplastics (MPs) has attracted global attention. Research has confirmed that MPs can strongly absorb almost every kind of pollutant and can serve as vectors for pollutant transport. In this research, the sorption isotherms of six organic pollutants with different structure on four virgin plastic particles with different crystallinity were determined. Results indicated that the hydrophobicity (KOW) of organic pollutants and the crystallinity of MPs were the two key factors that affected the sorption process of organic pollutants on MPs. Strong correlations were observed between KOW and the partition coefficient. Hydrophobic partition was one of the major mechanisms regardless of the type of organic chemical (hydrophobic, polar, or dissociable). What is more, the influence of the crystallinity of MPs on the sorption process increased with increasing hydrophobicity of the chemical. Combining this result with analyzing the related literature on the effect of crystallinity, it was concluded that the effect of crystallinity on the sorption of chemicals with strong hydrophobicity was obvious, whereas this effect was negligible for chemicals with weak hydrophobicity. The influence of the crystallinity of MPs on sorption could even exceed the influence of MPs type, so crystallinity should be considered carefully when discussing the sorption capacity of MPs. This study enhances the understanding of the sorption of organic pollutants by MPs.

Aging increases the particulate- and leachate-induced toxicity of tire wear particles to microalgae

The toxic effects of tire wear particles (TWPs) on organisms have attracted widespread concerns over the past decade. However, the underlying toxicity mechanism of TWPs, especially aged TWPs to marine microalgae remains poorly understood. This study investigated the physiological and metabolic responses of Phaeodactylum tricornutum to different concentrations of TWPs (Experiment 1), virgin and differently aged TWPs (Experiment 2) as well as their leachates and leached particles (Experiment 3). Results demonstrated that TWPs promoted the growth of microalgae at low concentrations (0.6 and 3 mg L-1) and inhibited their growth at high concentrations (15 and 75 mg L-1). Moreover, aged TWPs induced more profound physiological effects on microalgae than virgin TWPs, including inhibiting microalgae growth, decreasing the content of Chla, promoting photosynthetic efficiency, and causing oxidative damage to algal cells. Untargeted metabolomics analysis confirmed that aged TWPs induced more pronounced metabolic changes than virgin TWPs. This study represented the first to demonstrate that both particulate- and leachate-induced toxicity of TWPs was increased after aging processes, which was confirmed by the changes in the surface morphology of TWPs and enhanced release of additives. Through the significant correlations between the additives and the microalgal metabolites, key additives responsible for the shift of microalgal metabolites were identified. These results broaden the understanding of the toxicity mechanism of aged TWPs to microalgae at the physiological and metabolic levels and appeal for considering the effects of long-term aging on TWP toxicity in risk assessment of TWPs.

The triple exposure nexus of microplastic particles, plastic-associated chemicals, and environmental pollutants from a human health perspective

The presence of microplastics (MPs) is increasing at a dramatic rate globally, posing risks for exposure and subsequent potential adverse effects on human health. Apart from being physical objects, MP particles contain thousands of plastic-associated chemicals (i.e., monomers, chemical additives, and non-intentionally added substances) captured within the polymer matrix. These chemicals are often migrating from MPs and can be found in various environmental matrices and human food chains; increasing the risks for exposure and health effects. In addition to the physical and chemical attributes of MPs, plastic surfaces effectively bind exogenous chemicals, including environmental pollutants (e.g., heavy metals, persistent organic pollutants). Therefore, MPs can act as vectors of environmental pollution across air, drinking water, and food, further amplifying health risks posed by MP exposure. Critically, fragmentation of plastics in the environment increases the risk for interactions with cells, increases the presence of available surfaces to leach plastic-associated chemicals, and adsorb and transfer environmental pollutants. Hence, this review proposes the so-called triple exposure nexus approach to comprehensively map existing knowledge on interconnected health effects of MP particles, plastic-associated chemicals, and environmental pollutants. Based on the available data, there is a large knowledge gap in regard to the interactions and cumulative health effects of the triple exposure nexus. Each component of the triple nexus is known to induce genotoxicity, inflammation, and endocrine disruption, but knowledge about long-term and inter-individual health effects is lacking. Furthermore, MPs are not readily excreted from organisms after ingestion and they have been found accumulated in human blood, cardiac tissue, placenta, etc. Even though the number of studies on MPs-associated health impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs' effects on human health in order to address existing and future knowledge gaps.

Detection and characterisation of microplastics in tap water from Gauteng, South Africa

This study reports the presence, concentration, and characteristics of microplastics (MPs) in tap water in three suburbs in Gauteng Province in South Africa. Physical characterisation was conducted using stereomicroscopy and scanning electron microscopy following staining of MPs with the Rose Bengal dye. The concentrations of MPs in all samples ranged from 4.7 to 31 particles/L, with a mean of 14 ± 5.6 particles/L. Small-sized (<1 mm) and fibrous-shaped MPs were most abundant in all samples. Fibers accounted for 83.1% of MPs in samples from all the three areas, followed by fragments (12.4%), pellets/beads (3.1%), and films (1.5%), with a minor variation in the distribution of shapes and sizes in samples from each area. Raman microspectroscopy was used for chemical analysis, and five polymers were identified, namely: high-density polyethylene, polyurethane, polyethylene terephthalate, poly(hexamethylene terephtalamide), and poly(acrylamide-co-acrylic acid). C.I Pigment Red 1, C.I. Solvent Yellow 4, Potassium indigotetrasulphonate, and C.I Pigment Black 7 were the colourants detected. These colourants are carcinogenic and mutagenic and are potentially toxic to humans. The prevalence of MPs in tap water implies their inadequate removal during water treatment. For instance, the presence of poly(AM-co-AA) suggests that drinking water treatment plants may be a potential source of MPs in tap water. Other polymers, e.g., high-density polyethylene may be released from pipes during the transportation of drinking water. The estimated daily consumption of MPs from tap water was 1.2, 0.71, and 0.50 particles/kg.day for children, men, and women, respectively. The findings of this study provide evidence of the presence of MPs in drinking water in South Africa, thus giving some insights into the performance of treatment plants in removing these contaminants and a benchmark for the formulation of standard limits for the amount of MPs in drinking water.

Innovative overview of the occurrence, aging characteristics, and ecological toxicity of microplastics in environmental media

Microplastics (MPs), pollutants detected at high frequency in the environment, can be served as carriers of many kinds of pollutants and have typical characteristics of environmental persistence and bioaccumulation. The potential risks of MPs ecological environment and health have been widely concerned by scholars and engineering practitioners. Previous reviews mostly focused on the pollution characteristics and ecological toxicity of MPs, but there were few reviews on MPs analysis methods, aging mechanisms and removal strategies. To address this issue, this review first summarizes the contamination characteristics of MPs in different environmental media, and then focuses on analyzing the detection methods and analyzing the aging mechanisms of MPs, which include physical aging and chemical aging. Further, the ecotoxicity of MPs to different organisms and the associated enhanced removal strategies are outlined. Finally, some unresolved research questions related to MPs are prospected. This review focuses on the ageing and ecotoxic behaviour of MPs and provides some theoretical references for the potential environmental risks of MPs and their deep control.

Are we underestimating stormwater? Stormwater as a significant source of microplastics in surface waters

Stormwater represent a critical pathway for transporting microplastics (MPs) to surface waters. Due to complex dynamics of MPs in stormwater, its dispersion, weathering, risk, and transport are poorly understood. This review bridges those gaps by summarizing the latest findings on sources, abundance, characteristics, and dynamics involved in stormwater MP pollution. Weathering starts before or after MPs enter stormwater and is more pronounced on land due to continuous heat and mechanical stress. Land use patterns, rainfall intensity, MPs size and density, and drainage characteristics influence the transport of MPs in stormwater. Tire and road wear particles (TRWPs), littering, and road dust are major sources of MPs in stormwater. The concentrations of MPs varies from 0.38-197,000 particles/L globally. Further MP concentrations showed regional variations, highlighting the importance of local monitoring efforts needed to understand local pollution sources. We observed unique signatures associated with the shape and color of MPs. Fibers and fragments were widely reported, with transparent and black being the predominant colors. We conclude that the contribution of stormwater to MP pollution in surface waters is significantly greater than wastewater treatment plant effluents and demands immediate attention. Field and lab scale studies are needed to understand its behavior in stormwater and the risk posed to the downstream water bodies.

Effect of aging on the release of di-(2-ethylhexyl) phthalate from biodegradable and petroleum-based microplastics into soil

Due to microplastics (MPs) being widely distributed in soil, the use of advanced oxidation to remediate organic-contaminated soils may accelerate the aging of MPs in soil and impact the release of di-(2-ethylhexyl) phthalate (DEHP), a potential carcinogen used as a plasticizer in plastics, from MPs. In this study, persulfate oxidation (PO) and temperature treatment (TT) were used to treat biodegradable and petroleum-based MPs, including polylactic acid (PLA), polyvinyl chloride (PVC), and polystyrene (PS). The methods used for evaluating the characteristics changes of MP were X-ray diffraction (XRD) analysis and water contact angle measurement. The effects of aging on DEHP release from MPs were investigated via soil incubation. The results showed PO and TT led to increased surface roughness, oxygen-containing functional group content, and hydrophilicity of the MPs with prolonged aging, consequently accelerating the release of DEHP from the MPs. Interestingly, PLA aged faster than PVC and PS under similar conditions. After 30 days of PO treatment, DEHP release from PLA into the soil increased 0.789-fold, exceeding the increase from PVC (0.454-fold) and PS (0.287-fold). This suggests that aged PLA poses a higher ecological risk than aged PVC or PS. Furthermore, PO treatment resulted in the oxidation and degradation of DEHP on the MP surface. After 30 days of PO treatment, the DEHP content in PLA, PVC, and PS decreased by 19.1%, 25.8%, and 23.5%, respectively. Specifying the types of MPs studied and the environmental conditions would provide a more precise context for the results. These findings provide novel insights into the fate of biodegradable and petroleum-based MPs and the potential ecotoxicity arising from advanced oxidation remediation in contaminated soils.

Various additive release from microplastics and their toxicity in aquatic environments

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

Fate and potential risks of microplastic fibers and fragments in water and wastewater treatment processes

Water and wastewater treatment plants (WWTPs) receive various types of microplastics (MPs), with fibers and fragments being dominant shapes. Here we investigated the removal behavior and transformation of MPs (polypropylene and polyethylene terephthalate fibers and fragments) in simulated water and wastewater treatment units, including activated sludge process, coagulation, sand filtration, and advanced oxidation/disinfection. Sand filtration demonstrated the highest average efficiency in removing MPs (98 %), followed by activated sludge process (61 %) and coagulation (55 %), which was associated with their physicochemical properties (shape, size, density, surface functional groups, etc). In activated sludge process and coagulation, the polymer type had a greater impact on the removal of MPs than the particle shape, while in sand filtration, the particle shape played a more important role. When subjected to the long-term operation and backwashing of sand filters, approximately 15 % of the initially filtered fragments broke through the sand media, with nearly no fibers escaping. UV-based advanced oxidation and chlorination induced the leaching of dissolved organic matters with different molecular characteristics from fragment MPs, resulting in varying levels of cytotoxicity and bacterial toxicity. Our study provides important information for predicting the fate of MPs and mitigating their impacts in WWTPs.

Insights into emerging organic pollutants extraction from polypropylene, polystyrene, and polyethylene microplastics

BACKGROUND

Microplastics have the capability of retaining contaminants on their surface, increasing their persistence, preconcentrating them, and acting as transport vectors. Nevertheless, the determination of these compounds in plastic matrices poses several analytical issues and challenges, including the capability of many of these methods of only determining the extractable pollutants fractions, repeatability issues, etc. In this sense, it is primordial to evaluate the effect of the critical parameters that allow to obtain a quantitative extraction of the target analytes from microplastics, including the matrix effect of each of the studied polymers, the influence of particle size, and the effect of weathering.

RESULTS

A simple and effective methodology for the extraction of 17 emerging organic pollutants from both pristine (polypropylene, polystyrene, and low- and high-density polyethylene) and weathered (polypropylene and polyethylene) microplastics has been developed, optimized, and validated, achieving recovery values of 70-120 % and low method quantification limits (9.2-35.5 ng/g). Results show the importance of cryomilling microplastics (as smaller particle sizes improve recovery and homogenization), something ignored in most publications. The differences in matrix effect for the studied pristine polymers highlights the importance of treating polymers individually, without extrapolating results. In weathered microplastics, matrix effect is overall higher than in their pristine counterparts, evidencing the necessity of always carrying out matrix effect and recovery studies in environmental microplastics. The analysis of 10 samples collected in Playa Grande (Tenerife, Canary Islands, Spain) revealed quantitative amounts of bisphenol A (10.8 ± 3.4 ng/g) in one of them.

SIGNIFICANCE

For the first time, the effect of particle size, weathering and matrix effect have been simultaneously evaluated on microplastics, revealing the importance of their assessment to properly validate the methodology. Additionally, the method shows good performance in all the different polymers and has been successfully applied to the analysis of environmental samples of microplastics.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Selection for antimicrobial resistance in the plastisphere

Microplastics and antimicrobials are widespread contaminants that threaten global systems and frequently co-exist in the presence of human or animal pathogens. Whilst the impact of each of these contaminants has been studied in isolation, the influence of this co-occurrence in driving antimicrobial resistance (AMR)1 in microplastic-adhered microbial communities, known as 'the Plastisphere', is not well understood. This review proposes the mechanisms by which interactions between antimicrobials and microplastics may drive selection for AMR in the Plastisphere. These include: 1) increased rates of horizontal gene transfer in the Plastisphere compared with free-living counterparts and natural substrate controls due to the proximity of cells, co-occurrence of environmental microplastics with AMR selective compounds and the sequestering of extracellular antibiotic resistance genes in the biofilm matrix. 2) An elevated AMR selection pressure in the Plastisphere due to the adsorbing of AMR selective or co-selective compounds to microplastics at concentrations greater than those found in surrounding mediums and potentially those adsorbed to comparator particles. 3) AMR selection pressure may be further elevated in the Plastisphere due to the incorporation of antimicrobial or AMR co-selective chemicals in the plastic matrix during manufacture. Implications for both ecological functioning and environmental risk assessments are discussed, alongside recommendations for further research.

Leaching of heavy metals from polyester microplastic fibers and the potential risks in simulated real-world scenarios

Heavy metals have been incorporated as additives into synthetic textiles to enhance their functional properties. However, these fibers are susceptible to shedding due to mechanical wear, and the release of heavy metals from microplastic fibers (MFs) remains largely uncharacterized. Therefore, this study sought to quantify the levels of heavy metals in textiles, evaluate their leaching capabilities under various scenarios, and ultimately assess the potential health risks associated with MFs ingestion. First, we determined the metal content in eight commonly used polyester textiles. Subsequently, we estimated the metal leaching capacities of specific MFs sourced from carpets, curtains, sweaters, and scarves in freshwater, human saliva, human lung fluid, and fish gastric fluid at distinct time intervals. The results indicated that carpets contained the highest amount of total metals, with a concentration of 218 ± 8 mg/kg. Ultraviolet weathering, coupled with longer exposure durations, led to surface coarsening of MFs, which may be the primary reason for the enhanced leaching of metals in freshwater. Furthermore, our findings revealed that carbonyl index was unsuitable for characterizing aging because polyester inherently contains carbonyl groups. Instead, the O/C ratio emerged as a more suitable indicator. The leached concentrations and percentages of metals from MFs exhibited the following order in biofluids: Sb>Mn>Cr and Cr>Mn>Pb in biofluids, respectively. Finally, the estimated daily intake of metals was significantly below the tolerable thresholds (0.0014-0.14 mg/kg/d for fish and 0.0036-1.0 mg/kg/d for humans), indicating a negligible risk of heavy metal exposure through MFs for both fish and humans. ENVIRONMENTAL IMPLICATION: In recent years, the ecological risks posed by heavy metal contaminants loaded onto microplastic fibers have become an increasing concern. Therefore, our study sought to characterize the accumulation of heavy metals on plastic fabrics and the potential for these loaded heavy metals to be released when microplastic fibers originating from these fabrics enter freshwater environments and interact with organisms. This vector-like behavior underscores the importance of investigating the ecological hazards associated with microplastic fibers carrying contaminants in both environmental and organismal contexts.

Oxidative stress and energy metabolic response of Isochrysis galbana induced by different types of pristine and aging microplastics and their leachates

The aging process and leachate composition of different types of MPs (PS, PS-NH2, PS-COOH and PMMA) with a particle size of 1.0 μm were characterized, and marine microalgae Isochrysis galbana OA3011(I. galbana) was used as test organism to investigate the 96 h toxic effects of MPs before and after aging as well as leachate exposure. Except for polymethyl methacrylate (PMMA), all other tested microplastics showed significant aggregation in seawater, which increased with the presence of surface amino and carboxyl groups, in addition, the increase in polymer dispersibility index (PDI) values after aging reflected more severe aggregation. Fourier transform infrared spectrometer (FTIR) showed that the surface amino groups were shed during the aging of PS-NH2, which can likewise be demonstrated by the change in surface electric potential from positive to negative before and after aging. PMMA, due to the addition of plasticizers (HEHP and DIBP detected in high concentration) and its own structure, has stronger resistance to aging than the other three microplastics, and no significant aging phenomenon occurs. As for I. galbana, growth inhibition, oxidative stress and energy metabolism were tested after exposure to different microplastics and their leachate. It was found that high concentrations of A-PS had a greater negative impact on I. galbana, while the toxic effects of PS-NH2 and PS-COOH on I. galbana behaved in a diametrically opposite way before and after aging compared to PS with the inhibitory effect decreasing after aging, which was caused by the shedding of surface groups. As for PMMA, the differences in the toxic effects on microalgae before and after aging were not significant. The inhibitory effect of low concentrations of PAEs (Phthalate acid esters) in the leachate of PS-COOH on I. galbana was not significant, and the stronger inhibitory effect of 4 d L-PS-NH2 was presumed to be the shedding of positively charged groups.

Leaching and transformation of chemical additives from weathered plastic deployed in the marine environment

Plastic pollution causes detrimental environmental impacts, which are increasingly attributed to chemical additives. However, the behaviour of plastic additives in the marine environment is poorly understood. We used a marine deployment experiment to examine the impact of weathering on the extractables profile, analysed by liquid chromatography-mass spectrometry, of four plastics at two locations over nine months in Aotearoa/New Zealand. The concentration of additives in polyethylene and oxo-degradable polyethylene were strongly influenced by artificial weathering, with deployment location and time less influential. By comparison, polyamide 6 and polyethylene terephthalate were comparatively inert with minimal change in response to artificial weathering or deployment time. Non-target analysis revealed extensive differentiation between non-aged and aged polyethylene after deployment, concordant with the targeted analysis. These observations highlight the need to consider the impact of leaching and weathering on plastic composition when quantifying the potential impact and risk of plastic pollution within receiving environments.

Alteration of microbial mediated carbon cycle and antibiotic resistance genes during plastisphere formation in coastal area

Microorganisms can attach on the surface of microplastics (MPs) through biological fouling process to form a diverse community called the "plastisphere", which has attracted extensive attention. Although the microbial structure and composition of biofilm have been studied, the knowledge of its microbial function and ecological risk is still limited. In this study, we investigated how the surface properties of MPs affect the biofilm communities and metabolic features under different environmental conditions, and explored the biofilm enrichment of antibiotic resistance genes (ARGs). The results showed that the incubation time, habitat and MPs aging state significantly influenced the structure and composition of biofilm microbial communities, and a small amount of pathogens have been found in the MPs-attached biofilm. The microbial carbon utilization capacity of the biofilm in different incubation habitats varies greatly with highest metabolism capacity appear in the river. The utilization efficiency of different carbon sources is polymer > carbohydrate > amino acid > carboxylic acids > amine/amide, which indicates that the biofilm communities have selectivity between different types of carbon sources. More importantly, ARGs were detected in all the MPs samples and showed a trend of estuary > river > marine. The aged MPs can accumulate more ARGs than the virgin items. In general, MPs in the aquatic environment may become a carrier for pathogens and ARGs to spread to other environment, which may enhance their potential risks to the ecosystem and human health.

Interactions between microplastics and contaminants: A review focusing on the effect of aging process

Microplastics (MPs) in the environment are a major global concern due to their persistent nature and wide distribution. The aging of MPs is influenced by several processes including photodegradation, thermal degradation, biodegradation and mechanical fragmentation, which affect their interaction with contaminants. This comprehensive review aims to summarize the aging process of MPs and the factors that impact their aging, and to discuss the effects of aging on the interaction of MPs with contaminants. A range of characterization methods that can effectively elucidate the mechanistic processes of these interactions are outlined. The rate and extent of MPs aging are influenced by their physicochemical properties and other environmental factors, which ultimately affect the adsorption and aggregation of aged MPs with environmental contaminants. Pollutants such as heavy metals, organic matter and microorganisms have a tendency to accumulate on MPs through adsorption and the interactions between them impact their environmental behavior. Aging enhances the specific surface area and oxygen-containing functional groups of MPs, thereby affecting the mechanism of interaction between MPs and contaminants. To obtain a more comprehensive understanding of how aging affects the interactions, this review also provides an overview of the mechanisms by which MPs interact with contaminants. In the future, there should be further in-depth studies of the potential hazards of aged MPs in different environments e.g., soil, sediment, aquatic environment, and effects of their interaction with environmental pollutants on human health and ecology.

Toxicity of polyvinyl chloride microplastics on Brassica rapa

Microplastics (MPs) can pose high risk to living organisms due to their very small sizes. This study selected polyvinyl chloride MPs (PVC-MPs) which experienced up to 1000 h UV light radiation to investigate the influence of PVC-MPs on Brassica rapa growth. The outcomes showed the presence of PVC-MPs inhibited the plants' growth. The stem length, root length, fresh weight and dry weight of plants exposed to PVC-MPs after 30 days reduced by 45.9%, 35.2%, 26.1% and 5.2%, respectively. The chlorophyll, soluble sugar, malondialdehyde (MDA) and catalase (CAT) concentrations for plants exposed to PVC-MPs after 30 days increased by 25.9%, 135.7%, 88.7% and 47.1% respectively. It was also observed that PVC-MPs blocked the plants' leaf stomata and even entered plants' bodies. This might lead to PVC-MPs movement within the plants and influence plants' growth. The transcriptomic analysis results indicated that exposure to PVC-MPs up-regulated metabolic pathway of plant hormone signal transduction of the plants and down-regulated pathway network of ribosome. However, the research outcomes also showed that the PVC-MPs' locations in soil (located at the upper layers or at lower layers) and the UV light radiation time did not exert significantly different influences on inhibiting plants' growth. This can be attributed to PVC-MPs' small sizes and not much decomposition under light radiation. These imply that longer light radiation time and different particle sizes should be included into future research in order to further explore photodegraded MPs' toxicity effects on plants.

The destiny of microplastics in one typical petrochemical wastewater treatment plant

Microplastic (MP) is a type of emerging contaminant that is verified to be threatening to some organisms. Controlling MP emission from the source is preferred for its refractory characteristic. The petrochemical industry is a possible contributor, responsible for the most plastic production, and wastewater is the most possible sink of MP. This study applied the Agilent 8700 Laser infrared imaging spectrometer (LDIR) to detect MPs in one typical petrochemical wastewater treatment plant (PWWTP). It was determined that the abundances of MPs in the influent and effluent of the target PWWTP were as high as 7706 and 608 particles/L. The primary treatment removed most MPs (87.5 %) with a final removal efficiency of 92.1 %. 23 types of MPs were identified, and Polyethylene (PE), Polypropylene (PP), Silicone resin prevailed in the effluent. All the MPs were smaller than 483.9 μm. All in all, this study preliminarily unveiled the ignorable status of the petrochemical industry in releasing MPs into the water environment for the first time.

Differential Photoaging Effects on Colored Nanoplastics in Aquatic Environments: Physicochemical Properties and Aggregation Kinetics

Nanoplastics (NPs) have different colors, which could affect their photoaging processes in aquatic environments. This study investigated the effects of irradiation on physicochemical properties and aggregation kinetics of five colored NPs. Photodegradation rates and photooxidation degrees ranked white ≈ yellow > red > blue ≈ black NPs, indicating that NPs with longer color wavelengths photoaged faster. The discoloration process followed color fading (2-14 days, except for white NPs), yellowing (10-16 days), yellow fading (18 days), and turning transparent (20-22 days). White NPs exhibited a different photoaging sequence (C-H → C-OH → C═O → O-C═O) from others. Photodegradation was mainly controlled by singlet oxygen, producing 13 chemicals that were mostly organic acids. The overall colloidal stability of pristine NPs ranked blue > yellow > red > black > white. Irradiation for 16 days retarded aggregation of white and other NPs in NaCl solution, raising the critical coagulation concentration (CCC) by 82.14 and 0.85-7.90%, respectively. Contrarily, irradiation promoted aggregation in CaCl2 solution by reducing the CCC of white (67.37%) and other (33.33-37.58%) NPs. The findings demonstrate that colored NPs underwent photoaging processes different from white/transparent NPs, which were focused by previous work, highlighting the important role of color in their environmental fate and transport.

UV Dosage Unveils Toxic Properties of Weathered Commercial Bioplastic Bags

Previous studies indicated that weathered conventional plastics and bioplastics pose ecotoxicological risks. Here, the effects of artificial and natural weathering on the ecotoxicity of three compostable bags and a conventional polyethylene (PE) bag are investigated. With that aim, a 21-day artificial indoor weathering experiment featuring UV light, UV-filtered light, and darkness was run simultaneously to a 120-day outdoor littoral mesocosm exposure featuring natural light, UV-filtered light, and shaded conditions. Acute toxicity of so-weathered plastic specimens was tested in vivo using the sensitive Paracentrotus lividus sea-urchin embryo test. PE was nontoxic from the beginning and did not gain toxicity due to UV weathering. In contrast, for bioplastics, dry artificial UV weathering increased toxicity in comparison to the dark control. Weathering in outdoor mesocosm led to a rapid loss of toxic properties due to leaching in rainwater. With a higher UV dosage, a plastic-type-dependent regain of toxicity was observed, most likely driven by enhanced availability or transformation of functional additives or due to bioplastic degradation products. PE showed moderate UV absorbance, while bioplastics showed high UV absorbance. This study highlights the potential of biodegradable plastics to pose enhanced ecotoxicological risk due to weathering under environmentally relevant conditions.

Impact of accelerated weathering on the leaching kinetics of stabiliser additives from microplastics

The release of additives from microplastics is known to harm organisms. In the environment, microplastics are exposed to weathering processes which are suspected to influence additive leaching kinetics, the extent and mechanism of which remain poorly understood. We examined the impact of weathering on stabiliser additive leaching kinetics using environmentally relevant accelerated weathering and leaching procedures. Nine binary polymer-additive formulations were specifically prepared, weathered, analysed, and evaluated for their leaching characteristics. Cumulative additive release (Ce) varied widely between formulations, ranging from 0.009 to 1162 µg/g. Values of Ce generally increased by polymer type in the order polyethylene terephthalate < polyamide 6 < polyethylene. The change in leaching kinetics after accelerated weathering was incongruous across the nine formulations, with a significant change in Ce only observed for three out of nine formulations. Physicochemical characterisation of the microplastics demonstrated that additive blooming was the primary mechanism influencing the leaching response to weathering. These findings highlight the dependency of additive fate on the polymer type, additive chemistry, and the extent of weathering exposure. This has significant implications for risk assessment and mitigation, where the general assumption that polymer weathering increases additive leaching may be too simplistic.

Microplastic aging alters the adsorption-desorption behaviors of sulfamethoxazole in marine animals: A study in simulated biological liquids

Antibiotics and microplastics (MPs) coexisting as unique environmental contaminants may cause unintended environmental issues. In this study, the adsorption-desorption behaviors of sulfamethoxazole (SMX) on both original and UV-aged MPs were examined. Polyhydroxyalkanoates (PHA) and polyethylene (PE), which represent degradable and refractory MPs, respectively, were chosen as two distinct types of MPs. Furthermore, simulated fish intestinal fluids (SFIF) and simulated mammalian stomach fluids (SMGF) were employed to evaluate the desorption behaviors of SMX from aged MPs. Our findings demonstrate that UV-aging altered the polarity, hydrophilicity, and structure of the MPs. Aged MPs showed a higher adsorption capacity than the original MPs and they have a higher desorption capacity than original MPs in simulated body fluids. PE has a higher SMX desorption capacity in SFIF and the opposite happened in SMGF. Our results highlight the importance of considering the different adsorption-desorption behaviors of antibiotics on MPs when evaluating their environmental impact.

Aging rate, environmental risk and production efficiency of the low-density polyethylene (LDPE) films with contrasting thickness in irrigated region

Physical thickness of low-density polyethylene (LDPE) films might determine the release rate of phthalic acid esters (PAEs) & structural integrity and affect production efficiency. However, this critical issue is still unclear and little reported. Aging effects were evaluated in LDPE films with the thickness of 0.006, 0.008, 0.010 and 0.015 mm in a maize field of irrigation region. The Scanning electron microscope (SEM) results showed that the proportion of damaged area (Dam) to total area of LDPE films was massively lowered with increasing thickness after aging. The highest and lowest Dam was 32.2% and 3.5% in 0.006 and 0.015 mm films respectively. Also, the variations in peak intensity of asymmetric & symmetrical stretching vibrations (ASVI & SSVI) were detected using Fourier transform infrared spectrum (FTIR), indicating that the declines in peak intensity tended to be slower with thickness. Interestingly, the declines in physical integrity were tightly associated with increasing exhalation rate of PAEs. Average releasing rate of PAEs was 38.2%, 31.4%, 31.5% and 19.7% in LDPE films from 0.006 to 0.015 mm respectively. Critically, thicker film mulching can lead to greater soil water storage at plough layer (SWS-PL) and better thermal status, accordingly harvesting higher economic benefit. Therefore, LDPE film thickening may be a solution to reduce environmental risk but improve production efficiency in arid region.

Will the aging products of soil-reinforcement fibers stress plant growth and soil health?

Soil-reinforcement fibers are widely used for soil remediation and erosion prevention in ecologically vulnerable regions with sparse vegetation coverage and are incorporated into the soil for prolonged periods. However, the potential risks posed by aging fiber materials to soil health and plant growth have been largely neglected. This study explored the effects of aging solutions for polyethylene terephthalate (PET), coir, and carbon fibers on the physiological characteristics and vegetation coverage of ryegrass, as well as soil properties. Results indicated that PET and carbon fibers decreased ryegrass density and inhibited chlorophyll synthesis. All three fiber aging solutions aggravated leaf peroxidation, as represented by a sharp increase in the malondialdehyde (MDA) content. Leaf peroxidase activities improved, whereas the ascorbate peroxidase (APX) and superoxide dismutase (SOD) activities under the carbon fiber treatment were significantly lower than those under the PET and coir fiber treatments. The three fiber aging solutions significantly reduced soil H2O2 activity, improved soil leucine aminopeptidase (LAP) activity. Besides, coir fiber aging solution improved soil hemicellulose (CB) activity significantly. Aging solutions of PET and coir fibers increased the number of soil bacterial colonies, while the carbon fiber aging solution increased the number of soil actinomyces colonies. Overall, our findings demonstrate that fiber aging solutions decrease plant density, cause leaf damage, and alter soil characteristics in the short term. However, these solutions have minimal impact on soil health. The coir fiber aging solution has minimal effects on plant growth and soil properties, and is still a viable alternative to traditional non-degradable soil-reinforcing fibers.

Stealth microplastics pollutants: Toxicological evaluation of polyethylene terephthalate-based glitters on the microalga Desmodesmus sp. and its color effect

Polyethylene terephthalate-based glitters (PET glitters) are a potential source of primary microplastics in the environment. However, the bioeffects of PET glitters and the associated leachates remain largely unknown. In this study, we investigated the individual and combined toxicity of five colors (silver, black, red, green, and blue) of PET glitters and their corresponding leachates on the cellular responses of Desmodesmus sp. The results indicated that the photosynthesis of Desmodesmus sp. could be partly affected by PET glitters through the shading effect, but not that of growth. Conversely, the leachates of red and green PET glitters significantly inhibited the growth of the microalga, suggesting a higher risk associated with additives leached from these colors of PET glitters. Furthermore, the adverse effects of the co-occurrence of PET glitters and leachates were closely related to oxidative stress responses in the microalgal cells, along with a color effect, which could be mainly attributed to variations in the composition and abundance of toxic additives in different colors of PET glitters. Overall, our findings provide insights into the ecological risks posed by glitters in aquatic environments and emphasize the importance of considering color factors in assessing microplastics toxicity.

Characterizing the interaction between micro(nano)plastics and simulated body fluids and their impact on human lung epithelial cells

Micro(nano)plastics are considered an emerging threat to human health because they can interact with biological systems. In fact, these materials have already been found in the human body, such as in the lungs. However, limited data are available on the behavior of these materials under biological conditions and their impact on human cells, specifically on alveolar epithelial cells. In this study, micro(nano)plastics were exposed to various simulated biological fluids (artificial lysosomal fluids and Gamble's solution) for 2-80 h. Pristine and treated plastic particles were characterized based on their surface chemistry, zeta potentials, and elemental composition. Various toxicological endpoints (mitochondrial membrane potential, lactate dehydrogenase, protein, and antioxidant levels) were examined using A549 lung carcinoma cells. The surface characteristics of the treated micro(nano)plastics and the toxicological endpoints of A549 cells were found to be influenced by the simulated biological media, specifically with high concentrations of the treated micro(nano)plastics and increasing exposure under biological conditions. Moreover, the toxicological endpoints were strongly linked to the chemistry of plastics and included multiple processes in response to the plastics; different biological pathways were obtained in artificial lysosomal fluid and Gamble's solution.

Recent advances in biodegradation of emerging contaminants - microplastics (MPs): Feasibility, mechanism, and future prospects

Plastics have become an essential part of life. When it enters the environment, it migrates and breaks down to form smaller size fragments, which are called microplastics (MPs). Compared with plastics, MPs are detrimental to the environment and pose a severe threat to human health. Bioremediation is being recognized as the most environmentally friendly and cost-effective degradation technology for MPs, but knowledge about the biodegradation of MPs is limited. This review explores the various sources of MPs and their migration behavior in terrestrial and aquatic environments. Among the existing MPs removal technologies, biodegradation is considered to be the best removal strategy to alleviate MPs pollution. The biodegradation potential of MPs by bacteria, fungi and algae is discussed. Biodegradation mechanisms such as colonization, fragmentation, assimilation, and mineralization are presented. The effects of MPs characteristics, microbial activity, environmental factors and chemical reagents on biodegradation are analyzed. The susceptibility of microorganisms to MPs toxicity might lead to decreased degradation efficiency, which is also elaborated. The prospects and challenges of biodegradation technologies are discussed. Eliminating prospective bottlenecks is necessary to achieve large-scale bioremediation of MPs-polluted environment. This review provides a comprehensive summary of the biodegradability of MPs, which is crucial for the prudent management of plastic waste.

Endocrine disruptor responses in the embryos of marine medaka (Oryzias melastigma) after exposure to aged plastic leachates

The issue of the additives leached from plastics has attracted widespread attention. More crucially, endocrine disruptor status for several leached additives has been established. However, little is known about the overall endocrine disrupting effects of aged plastic leachates. Therefore, the transcriptional responses of endocrine-related genes were assessed in the embryos of marine medaka (Oryzias melastigma), which were exposed to the leachates from aged plastics that were immersed into the simulated seawater (SW) or fish digest (FD). The results revealed that there was a great difference between the SW and FD leachates in the transcripts of endocrine-related genes. With the exception of cyp1a, all target genes had their transcripts potentially down-regulated by the FD leachates. Chgl (a biomarker for estrogens), pparβ (related to lipid metabolism), and cyp19a (related to sexual differentiation and reproduction) transcripts tended to be repressed by the SW leachates, while pparα, pparγ and cyp1a (mediating metabolism of xenobiotics) transcripts were stimulated. In addition, a redundancy analysis was carried out to determine the relationship between the leached additives and the transcriptional changes. However, the additives only partially explained the variation in the transcripts of endocrine-related genes (24.8%), indicating that other leached additives may have an impact on target gene transcription. This study provided molecular evidence of the aged plastic leachates' endocrine disrupting effects. Exploring the primary factors that affect the transcriptional alterations would require more research.

Environmental occurrence and ecotoxicity of aquaculture-derived plastic leachates

Plastic products such as fishing nets and foam buoys have been widely used in aquaculture. To enhance the desirable characteristics of the final equipment, plastic gear for aquaculture is mixed with a wide range of additives. Recent studies have shown that additives could be leached out to the environment with a long-term use of aquaculture plastics, forming aquaculture-derived plastic leachates. It should be emphasized that some leachates such as phthalic acid esters (PAEs) and organophosphate esters (OPEs) are endocrine disruptors, which could increase the exposure risk of aquatic products and subsequently display potential threats to human health via food chain. However, systematic studies on the release, occurrence, bioaccumulation, and toxic effects of aquaculture-derived plastic leachates are missing, overlooking their potential sources and ecotoxicological risks in aquatic environments. We have reviewed and compared the concentrations of major plastic leachates in the water environment and organisms of global aquaculture and non-farmed areas, confirming that aquaculture leachate is an important source of contaminants in the environment. Moreover, the toxic effects of aquaculture-derived plastic additives and the related mechanisms are summarized with fish as a representative, revealing their potential health risk. In addition, we proposed current challenges and future research needs, which provides scientific guidance for the use and management of plastic products in aquaculture industries.

The disinfectant residues promote the leaching of water contaminants from plastic pipe particles

Disinfection treatment is an indispensable water purification process, but it can leave trace concentrations of disinfectant in the purified water. Disinfectants oxidation can age plastic pipes and release hazardous microplastics and chemicals into drinking water. Lengths of commercially-available unplasticized polyvinyl chloride and polypropylene random copolymer water pipe were ground into particles and exposed to micro-molar concentrations of ClO₂, NaClO, trichloroisocyanuric acid, or O₃ for up to 75 days. The disinfectants aged the plastic and changed its surface morphology and functional groups. Meanwhile, disinfectants could significantly promote the release of organic matter from plastic pipes into the water. ClO₂ generated the highest concentrations of organic matter in the leachates from both plastics. Plasticizers, antioxidants and low molecular weight organic matter were detected in all of the leachates. Leachate samples inhibited the proliferation of CT26 mouse colon cancer and induced oxidative stress in the cells. Even trace concentrations of residual disinfectant can constitute a drinking water risk.

Photoaging process and mechanism of four commonly commercial microplastics

Microplastics (MPs) are the widespread emerging pollutants in the terrestrial systems, and photo-oxidation is an effective process for aging MPs on land. Here, four common commercial MPs were exposed to ultraviolet (UV) light to simulate the photo-aging of MPs on soil, and the changes in surface properties and eluates of photoaging MPs were studied. Results revealed that polyvinyl chloride (PVC) and polystyrene (PS) exhibited more pronounced physicochemical changes than polypropylene (PP) and polyethylene (PE) during photoaging on the simulated topsoil, due to the dechlorination of PVC and the debenzene ring of PS. Oxygenated groups accumulated in aged MPs were strongly correlated with dissolved organic matters (DOMs) leaching. Through analysis of the eluate, we found that photoaging altered the molecular weight and aromaticity of DOMs. PS-DOMs showed the greatest increase in humic-like substances after aging, whereas PVC-DOMs exhibited the highest amount of additive leaching. The chemical properties of additives explained their differences in photodegradation responses, which also accounted for the greater importance of chemical structure of MPs to their structural stability. These findings demonstrate that the extensive presence of cracks in aged MPs facilitates DOMs formation and the complexity of DOMs composition poses a potential threat to soil and groundwater safety.

Sorption of levonorgestrel on polyethylene, polystyrene and polypropylene microplastics

Sorption studies involving microplastics (MPs) are essential to understand the mechanisms implicated in contaminant retention. In this research, a complete study of the sorption behaviour of a hormonal contraceptive -levonorgestrel- in MPs of different composition in two distinct matrices was performed, using high-performance liquid chromatography coupled to a UV detector for the determination of levonorgestrel. Characterization of the studied MPs was achieved by X-ray diffraction and differential scanning calorimetry, and Fourier-transformed infrared spectroscopy. Kinetic and isotherm studies were performed using a batch design under controlled conditions: 500 mg of MPs pellets of 3-5 mm diameter, agitation at 125 rpm, and 30 °C. The comparison of results in ultrapure water and artificial seawater, revealed changes in sorption capacity, and the predominant sorption mechanisms involved. Overall, all studied MPs showed sorption affinity towards levonorgestrel, being low-density polyethylene the one with the highest sorption capacity in ultrapure water and polystyrene in seawater.

Metal leaching from plastics in the marine environment: An ignored role of biofilm

A large quantity of metal compounds in plastics are released into the marine environment every year. However, our understanding of the extent and mechanism by which polymer-bound metals leach into seawater is still limited. In this study, a comprehensive survey was conducted to measure the metal concentrations in commonly used plastics and evaluate the effects of environmental factors (temperature, radiation, and salinity) and the physiochemical properties (surface roughness, specific surface area, hydrophobicity, and crystallinity) of the plastics on their metal leaching into seawater. In particular, we observed the metal loss from six plastics submerged in coastal seawater for eight months and studied the role of biofilm in controlling the leaching of Sb, Sn, Pb, Ba, and Cr. Our results indicate that increased temperature enhanced the release of these metals, while exposure to ultraviolet radiation significantly increased the leaching of Sn from polylactide (PLA). High salinity facilitated the leaching of Sn from PLA and Pb from polyvinylchloride ball, however inhibited the leaching of Ba from PE wrap. The leaching rate was primarily determined by the inherent property of crystallinity. Metal loss from the plastics in the field was apparent during the first three weeks, but then was hindered by the development of biofilm. Our study provides the mechanisms underlying metal leaching from physical, chemical, and biological perspectives, which is useful for understanding the environmental risk of the plastic-containing metals.

Recent advances in the research on effects of micro/nanoplastics on carbon conversion and carbon cycle: A review

Massive production and spread application of plastics have led to the accumulation of numerous plastics in the global environment so that the proportion of carbon storage in these polymers also increases. Carbon cycle is of fundamental significance to global climate change and human survival and development. With the continuous increase of microplastics, undoubtedly, there carbons will continue to be introduced into the global carbon cycle. In this paper, the impact of microplastics on microorganisms involved in carbon transformation is reviewed. Micro/nanoplastics affect carbon conversion and carbon cycle by interfering with biological fixation of CO₂, microbial structure and community, functional enzymes activity, the expression of related genes, and the change of local environment. Micro/nanoplastic abundance, concentration and size could significantly lead to difference in carbon conversion. In addition, plastic pollution can further affect the blue carbon ecosystem reduce its ability to store CO₂ and marine carbon fixation capacity. Nevertheless, problematically, limited information is seriously insufficient in understanding the relevant mechanisms. Accordingly, it is required to further explore the effect of micro/nanoplastics and derived organic carbon on carbon cycle under multiple impacts. Under the influence of global change, migration and transformation of these carbon substances may cause new ecological and environmental problems. Additionally, the relationship between plastic pollution and blue carbon ecosystem and global climate change should be timely established. This work provides a better perspective for the follow-up study of the impact of micro/nanoplastics on carbon cycle.

Interactive effects of polystyrene microplastics and Pb on growth and phytochemicals in mung bean (Vigna radiata L.)

Interaction of different pollutants can aggravate hazards to biotic components in agroecosystems. Microplastics (MPs) are especially needed to be focused on because of their increasing use in life around the globe. We investigated the interactive impacts of polystyrene microplastics (PS-MP) and lead (Pb) on mung bean (Vigna radiata L.). Toxicity of MPs and Pb directly impeded V. radiata attributes. In combination i.e., M2P2 (40 µM Pb + 4.0 mg L-1 MPs) predominantly reduced the shoot root fresh and dry weights. \ Pb and PS-MP impaired the Rubisco activity and chlorophyll contents. The dose dependent relationship (M2P2) discomposed indole 3-acetic acid by 59.02%. Individual treatments P2 (40 µM Pb) and M2 (4.0 mg L^-1 MPs) respectively instigated a decline (44.07% and 27.12%) in IBA, while ABA was elevated. M2 significantly enhanced the contents of Alanine (Ala), Arginine (Arg), Proline (Pro), and glycine (Gly) by 64.11%, 63%, and 54% compared to control. Lysine (Lys) and Valine (Val) presented a converse relationship with other amino acids. Except for control, a gradual decline in yield parameters were observed in individual and combined applications of PS-MP. Proximate composition of carbohydrates, lipids and proteins also reflected a clear decrease in these compounds after combined application of Pb and MPs. Although, individual doses caused a decline in these compounds but effect of combined doses Pb and PS-MP was highly significant. Our results demonstrated the toxicity effect of Pb and MP in V. radiata attributes that is mainly linked with cumulative physiological and metabolic perturbations. These collective negative impacts of different doses of MPs and Pb on V. radiata would certainly pose serious implications for humans.

The spatial distribution and abundance of microplastics in lake waters and ice during ice-free and ice-covered periods

Understanding the spatial distribution and characteristics of microplastics (MPs) in lake waters is essential to assessing and addressing lacustrine MP pollution. This study investigated how lake ice affects the abundance, spatial distribution, and characteristics (size, shape) of MPs in Lake Ulansuhai by analyzing samples collected at ten sites uniformly distributed throughout the lake during ice-free and ice-covered periods. The abundance of MPs ranged between 204 ± 28 and 1224 ± 185 n·L^-1 in lake waters during the ice-free period, and from 34 ± 8 to 216 ± 21 n·L^-1 and 269 ± 84 to 915 ± 117 n·L^-1 in water and ice during the ice-covered period, respectively. During the ice-covered period, MPs were 2.74-8.14 times higher in the ice than in water beneath the ice. Ice formation decreased MP abundance in lake waters, in part, by incorporating a relatively high percentage of MPs into the ice mass during freezing and by inhibiting atmospheric MPs from reaching the lake waters. The abundance of MPs in the water during the ice-free period was 4.50-11.30 times greater than during the ice-covered period. Seasonal variations in MP shape also occurred; the proportion of fibrous MPs in water decreased during the ice-covered period. Variations in MP abundance were partly due to differences in sedimentation rates; the settling of fibrous MPs is slower, making it easier for them to be captured during the formation of surface ice. Spatially, MPs were uniformly distributed during the ice-free period, but exhibited a spatially distinct pattern during ice-covered periods, when MPs in lake waters were higher in the northeast and lower in the southwest portions of the lake. During the ice-free period, small MPs (0.05-0.5 mm) were more likely to move with currents in the lake, whereas water velocities were reduced by ice formation, allowing small MPs to accumulate near the lake inlet.

Characteristics and behaviors of microplastics undergoing photoaging and Advanced Oxidation Processes (AOPs) initiated aging

The fact that 94% of microplastics (MPs) ubiquitous in the environment are subject to natural weathering makes the aging study currently a research hotspot. This review summarized the physicochemical characteristics of MPs undergoing natural and artificial aging and evaluated current analytical methods used in aging studies. Besides, the differences in photoaging and aging induced by advanced oxidation processes (AOPs) were discussed, leading to a conclusion that AOPs composed of oxidant and ultraviolet (UV) irradiation can better facilitate the alteration of MPs compared to UV irradiation alone. In addition, the environmental behavior of aged MPs was outlined and their adsorption properties for organics and metals were highlighted as a result of combined effects of hydrophobic, π-π, diffusion, and hydrogen bond interaction. Furthermore, the mechanisms of photoaging and AOPs-initiated aging were analyzed, mainly the role of reactive oxygen species (ROS) and environmentally persistent free radicals (EPFRs). Finally, the applications of two-dimensional correlation spectroscopy (2D-COS) and three-dimensional fluorescence spectra using excitation emission matrix-parallel factor analysis (EEM-PARAFAC) were discussed for the aging process analysis. This overview plays an important role in explaining the aging characteristics of MPs and provides a theoretical foundation for further investigations into their toxicity and removal.

The generation of environmentally persistent free radicals on photoaged microbeads from cosmetics enhances the toxicity via oxidative stress

Microbeads used in personal care products have been one of the important sources of microplastics (MPs), and little has been reported on their environmental behaviors and health risks. The characteristics of environmentally persistent free radicals (EPFRs) and the toxicity assessment of MPs (environmentally relevant concentrations) from cosmetics during photoaging remains largely unknown. In this study, the formation of EPFRs on polyethylene (PE) microbeads from facial scrubs under light irradiation and their toxicity were investigated using C. elegans as a model organism. The results suggested that light irradiation induced the generation of EPFRs, which accelerates the aging process and alters the physicochemical properties of PE microbeads. Acute exposure to PE (1 mg/L) at photoaged times of 45-60 d significantly decreased the physiological indicators (e.g., head thrashes, body bends, and brood size). The oxidative stress response and stress-related gene expression were also enhanced in nematodes. The addition of N-acetyl-l-cysteine induced significant inhibition of toxicity and oxidative stress in nematodes exposed to 45-60 d of photoaged PE. The Pearson correlation results showed that the concentration of EPFRs was significantly correlated with physiological indicators, oxidative stress, and related-genes expression in nematodes. The data confirmed that the generation of EPFRs combined with heavy metals and organics contributed to toxicity induced by photoaged PE, and oxidative stress might be involved in regulating adverse effects in C. elegans. The study provides new insight into the potential risks of microbeads released into the environment during photoaging. The findings also highlight the necessity for considering the role of EPFRs formation in evaluating the impacts of microbeads.

Mechanism and characterization of microplastic aging process: A review

With the increasing production of petroleum-based plastics, the problem of environmental pollution caused by plastics has aroused widespread concern. Microplastics, which are formed by the fragmentation of macro plastics, are bio-accumulate easily due to their small size and slow degradation under natural conditions. The aging of plastics is an inevitable process for their degradation and enhancement of adsorption performance toward pollutants due to a series of changes in their physiochemical properties, which significantly increase the toxicity and harm of plastics. Therefore, studies should focus on the aging process of microplastics through reasonable characterization methods to promote the aging process and prevent white pollution. This review summarizes the latest progress in natural aging process and characterization methods to determine the natural aging mechanism of microplastics. In addition, recent advances in the artificial aging of microplastic pollutants are reviewed. The degradation status and by-products of biodegradable plastics in the natural environment and whether they can truly solve the plastic pollution problem have been discussed. Findings from the literature pointed out that the aging process of microplastics lacks professional and exclusive characterization methods, which include qualitative and quantitative analyses. To lessen the toxicity of microplastics in the environment, future research directions have been suggested based on existing problems in the current research. This review could provide a systematic reference for in-depth exploration of the aging mechanism and behavior of microplastics in natural and artificial systems.

Polystyrene microplastics reduce Cr(VI) and decrease its aquatic toxicity under simulated sunlight

Microplastics (MPs) serve as vectors for chromium (Cr), influencing its fate and toxicity in aquatic environments, and have attracted much attention recently. However, it is still unknown whether MPs mediate Cr species transformation under sunlight irradiation. This study confirmed that polystyrene (PS) MPs could reduce Cr(VI) to Cr(III) under sunlight irradiation, with a photoreduction rate constant of 0.0023 h^-1. PS MPs-mediated Cr(VI) reduction was predominantly dependent on O₂^•- and simultaneously suppressed by ¹O₂, •OH and ³PS* . Aged PS MPs were exposed to simulated sunlight irradiation for 0, 200, 500, and 800 h, and Cr(VI) reduction was hindered by increased ¹O₂ and •OH formation and light-screening effects (decreased photon absorption). The size, functional groups and concentration of PS MPs and environmental factors (e.g., humic acid, pH, Mg²⁺, Fe³⁺ and O₂) strongly affected Cr(VI) reduction. Furthermore, Cr(VI) reduction induced by PS MPs could occur in reservoir water, and the reduction rate was faster than that in double distilled (DD) water. Correspondingly, PS MPs (1 mg/L) decreased the oxidative stress induced by Cr(VI) to Lemna minor in reservoir water after 96 h of sunlight irradiation. This study provided deep insight into how PS MPs affect Cr species transformations and hazardous effects in realistic aquatic environments under sunlight conditions.

Investigation of the adsorption-desorption behavior of antibiotics by polybutylene succinate and polypropylene aged in different water conditions

Microplastics (MPs) are widely present in aqueous environments and aged by natural components of complex water environments, such as salinity (SI) and dissolved organic matter (DOM). However, the effects of multicondition aging on the physicochemical properties and environmental behavior of MPs have not been completely investigated. In this study, the degradable MP polybutylene succinate (PBS) was used to investigate the environmental behavior of sulfamethoxazole (SMZ) and was compared with polypropylene (PP). The results showed that the single-factor conditions of DOM and SI, particularly DOM, promoted the aging process of MPs more significantly, especially for PBS. The degrees of MP aging under multiple conditions were lower than those under single-factor conditions. Compared with PP, PBS had greater specific surface area, crystallinity, and hydrophilicity and thus a stronger SMZ adsorption capacity. The adsorption behavior of MPs fitted well with the pseudo-second-order kinetic and Freundlich isotherm models, indicating multilayer adsorption. Compared with PP, PBS showed relatively a higher adsorption capacity, for example, for MPs aged under DOM conditions, the adsorption of SMZ by PBS was up to 5.74 mg/g, whereas that for PP was only 3.41 mg/g. The desorption experiments showed that the desorption amount of SMZ on MPs in the simulated intestinal fluid was greater than that in Milli-Q water. In addition, both the original PBS and the aged PBS had stronger desorption capacities than that of PP. The desorption quantity of PBS was 1.23-1.84 times greater than PP, whereas the desorption rates were not significantly different. This experiment provides a theoretical basis for assessing the ecological risks of degradable MPs in complex water conditions.