Hydrochar and pyrochar for sorption of pollutants in wastewater and exhaust gas: A critical review

Hydrochar as a bio-based adsorbent for heavy metals removal: A review of production processes, adsorption mechanisms, kinetic models, regeneration and reusability

The spread of heavy metals throughout the ecosystem has extremely endangered human health, animals, plants, and natural resources. Hydrochar has emerged as a promising adsorbent for removal of heavy metals from water and wastewater. Hydrochar, obtained from hydrothermal carbonization of biomass, owns unique physical and chemical properties that are highly potent in capturing heavy metals via surface complexation, electrostatic interactions, and ion exchange mechanisms. This review focuses on removing heavy metals by hydrochar adsorbents from water bodies. The article discusses factors affecting the adsorption capacity of hydrochars, such as contact time, pH, initial metal concentration, temperature, and competing ions. Literature on optimization approaches such as surface modification, composite development, and hybrid systems are reviewed to enlighten mechanisms undertaking the efficiency of hydrochars in heavy metals removal from wastewater. The review also addresses challenges such as hydrochar regeneration and reusability, alongside potential issues related to its disposal and metal leaching. Integration with current water purification methods and the significance of ongoing research and initiatives promoting hydrochar-based technologies were also outlined. The article concludes that combining hydrochar with modern technologies such as nanotechnology and advanced oxidation techniques holds promise for improving heavy metal remediation. Overall, this comprehensive analysis provides valuable insights to guide future studies and foster the development of effective, affordable, and environmentally friendly heavy metal removal technologies to ensure the attainment of safer drinking water for communities worldwide.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Inhibition performance of almond shell hydrochar-based fish oil emulsion gel on Klebsiella pneumonia inoculated fish skin and its characteristics

In this study, the inhibition potential against Klebsiella pneumoniae (K. pneumoniae) and the characterization of fish oil (FO) emulsion gel (EGE) containing almond shell hydrochar (AH) were investigated. Oily water of mullet liver was emulsified using tween 80, then gelled using gelatin and finally immobilized into hydrochar using an ultrasonic homogenizer. Characteristics and surface analysis of hydrochar-based emulsion gel (HEGE) were examined using FTIR and SEM. Stability, particle size distribution and zeta potential of HEGE were measured. In this study, a zeta potential of -18.46 indicated that HEGE was more stable than EGE (35.7 mV). The addition of hydrochar to the emulsion gel containing micro-droplets enabled the structure to become fully layered and stable. Time-dependent inactivation of K. pneumoniae exposed to HEGE and fixed in 6 mm-fish skin was evaluated for the first time in this study. While the highest log reduction and percent reduction in the bacterial count were achieved within 5 min with 0.87 CFU/cm2 and 86.60% with EGE, the lowest log reduction and percent reduction were achieved with 0.003 CFU/cm2 and 0.082% with HEGE in 30 min. In conclusion, the almond shell hydrochar-immobilized emulsion gel is a functional adsorbent that can inhibit K. pneumonia, and its stability and performance make it a unique candidate for further studies in this field.

Photochemical behavior of dissolved organic matter derived from Alternanthera philoxeroides hydrochar: Insights from molecular transformation and photochemically reactive intermediates

Hydrochar-derived dissolved organic matter (HDOM) enters aquatic ecosystems through soil leaching and surface runoff following the application of hydrochar. However, the photochemical behavior of HDOM remains unclear. The photo-transformation of HDOM was analyzed by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS), multiple spectroscopy methods, high-performance liquid chromatography, and combining synchronous fluorescence and Fourier-transform infrared spectroscopy with two-dimensional correlation spectroscopy. The results showed that with the increase of carbonization temperature, amide II in protein-like substances were observed to be preferentially photolyzed, and the protein-like substances were more sensitive to low irradiation time, while the duration time of the photochemical behavior of amide II and aliphatic C-H were more persistent. FT-ICR MS results showed that N and S-containing molecules, including lignins and lipids were more sensitive to ultraviolet irradiation. Furthermore, the photo-transformation of HDOMs was accompanied by the generation of triple excited state dissolved organic matter and singlet oxygen. Our findings will be beneficial for understanding the mechanisms of photo-transformation of HDOM and for predicting the possible behaviors of hydrochar produced at different temperatures before large-scale application.

Preparation of carbon-rich material from Dendrobium officinale polysaccharide in deep eutectic system

A carbon-rich material (DESysChar) was prepared from polysaccharide within a deep eutectic system (DESys) containing oxalic acid, and systematically characterized using various analytical techniques. The investigation of reaction mechanism revealed concurrent dehydration and etherification processes. This study commenced with the extraction of plant polysaccharide using the DESys-based mechanochemical extraction method from Dendrobium officinale. Subsequently, the DESys method was used to carbonize the extracted Dendrobium officinale polysaccharide and produce DESysChar. DESysChar was then used for the adsorption and determination of pollutants in water. This study represents a significant advancement in eco-friendly material synthesis, enabling the low-temperature (120 °C) carbonization of plant-derived polysaccharides, thereby reducing energy consumption and environmental impact. The effective adsorption of methylene blue by DESysChar underscores its potential in environmental remediation. This study presents a more responsible and efficient approach to polysaccharide extraction and carbonization, addressing environmental concerns. Embracing the 4S workflow (involving Sustainable raw materials converted into Sustainable degradable products, by using Sustainable technology throughout the process to create a Sustainable environment) promotes sustainability in material development, laying the foundation for future eco-friendly practices in various industries. In summary, this study propels sustainable polysaccharide development for widespread use.

Hydrochar-nanoparticle integration for arsenic removal from wastewater: Challenges, possible solutions, and future horizon

Arsenic (As) contamination poses a significant threat to human health, ecosystems, and agriculture, with levels ranging from 12 to 75% attributed to mine waste and stream sediments. This naturally element is abundant in Earth's crust and gets released into the environment through mining and rock processing, causing ≈363 million people to depend on As-contaminated groundwater. To combat this issue, introducing a sustainable hydrochar system has achieved a remarkable removal efficiency of over 92% for arsenic through adsorption. This comprehensive review presents an overview of As contamination in the environment, with a specific focus on its impact on drinking water and wastewater. It delves into the far-reaching effects of As on human health, ecosystems, aquatic systems, and agriculture, while also exploring the effectiveness of existing As treatment systems. Additionally, the study examines the potential of hydrochar as an efficient adsorbent for As removal from water/wastewater, along with other relevant adsorbents and biomass-based preparations of hydrochar. Notably, the fusion of hydrochar with nanoparticle-centric approaches presents a highly promising and environmentally friendly solution for achieving the removal of As from wastewater, exceeding >99% efficiency. This innovative approach holds immense potential for advancing the realms of green chemistry and environmental restoration. Various challenges associated with As contamination and treatment are highlighted, and proposed solutions are discussed. The review emphasizes the urgent need to advance treatment technologies, improve monitoring methods, and enhance regulatory frameworks. Looking outlook, the article underscores the importance of fostering research efforts, raising public awareness, and fostering interdisciplinary collaboration to address this critical environmental issue. Such efforts are vital for UN Sustainable Development Goals, especially clean water and sanitation (Goal 6) and climate action (Goal 13), crucial for global sustainability.

Hydrochar reduces oxytetracycline in soil and Chinese cabbage by altering soil properties, shifting microbial community structure and promoting microbial metabolism

The efficient remediation of antibiotic-contaminated soil is critical for agroecosystem and human health. Using the cost-effective and feedstock-independent hydrochar with rich oxygen-containing functional groups as a soil remediation material has become a hot concern nowadays. However, the feasibility and effectiveness of hydrochar amendment in antibiotic-contaminated soil still remain unknown. Therefore, this study investigated the remediation effect and potential mechanisms of different hydrochars from cow manure (H-CM), corn stalk (H-CS) and Myriophyllum aquaticum (H-MA) at two levels (0.5% and 1.0%) in oxytetracycline (OTC)-contaminated soil using a pot experiment. Results showed that compared with CK, OTC content in the soils amended with H-CM and H-MA was decreased by 14.02-15.43% and 9.23-24.98%, respectively, whereas it was increased by 37.03-42.64% in the soils amended with H-CS. Additionally, all hydrochar amendments effectively reduced the OTC uptake in root and shoot of Chinese cabbage by 10.41-57.99% and 31.92-65.99%, respectively. The response of soil microbial community to hydrochar amendment heavily depended on feedstock type rather than hydrochar level. The soil microbial metabolism (e.g., carbohydrate metabolism, amino acid metabolism) was enhanced by hydrochar amendment. The redundancy analysis suggested that TCA cycle was positively related to the abundances of OTC-degrading bacteria (Proteobacteria, Arthrobacter and Sphingomonas) in all hydrochar-amended soils. The hydrochar amendment accelerated the soil OTC removal and reduced plant uptake in soil-Chinese cabbage system by altering soil properties, enhancing OTC-degrading bacteria and promoting microbial metabolism. These findings demonstrated that the cost-effective and sustainable hydrochar was a promising remediation material for antibiotic-contaminated soil.

Ultraviolet-based synergistic processes for wastewater disinfection: A review

Ultraviolet (UV) irradiation is widely used for wastewater disinfection but suffers from low inactivation rates and can cause photoreactivation of microorganisms. Synergistic disinfection with UV and oxidants is promising for enhancing the inactivation performance. This review summarizes the inactivation effects on representative microorganisms by UV/hydrogen peroxide (H₂O₂), UV/ozone (O₃), UV/persulfate (PS), UV/chlorine, and UV/chlorine dioxide (ClO₂). UV synergistic processes perform better than UV or an oxidant alone. UV mainly attacks the DNA or RNA in microorganisms; the oxidants H₂O₂ and O₃ mainly attack the cell walls, cell membranes, and other external structures; and HOCl and ClO₂ enter cells and oxidize proteins and enzymes. Free radicals can have strong oxidation effects on cell walls, cell membranes, proteins, enzymes, and even DNA. At similar UV doses, the inactivation rates of Escherichia coli with UV alone, UV/H₂O₂, UV/O₃, UV/PS (peroxydisulfate or peroxymonosulfate), and UV/chlorinated oxidant (chlorine, ClO₂, and NH₂Cl) range from 2.03 to 3.84 log, 2.62-4.30 log, 4.02-6.08 log, 2.93-5.07 log, and 3.78-6.55 log, respectively. The E. coli inactivation rates are in the order of UV/O₃ ≈ UV/Cl₂ > UV/PS > UV/H₂O₂. This order is closely related to the redox potentials of the oxidants and quantum yields of the radicals. UV synergistic disinfection processes inhibit photoreactivation of E. coli in the order of UV/O₃ > UV/PS > UV/H₂O₂. The activation mechanisms and formation pathways of free radicals with different UV-based synergistic processes are presented. In addition to generating HO·, O₃ can reduce the turbidity and chroma of wastewater to increase UV penetration, which improves the disinfection performance of UV/O₃. This knowledge will be useful for further development of the UV-based synergistic disinfection processes.

Life cycle assessment of the hydrothermal carbonization process applied to the wet fraction mechanically separated from municipal mixed waste

The under-sieve fraction (USF), obtained as one of the output streams from the mechanical pretreatment of mixed municipal solid waste, is usually aerobically biologically stabilized before being landfilled. For its characteristics (i.e., moisture and organic content), the USF can be alternatively processed by hydrothermal carbonization (HTC), producing hydrochar to be used for energy production. Based on previous results obtained from laboratory HTC tests of the USF, this work is aimed at evaluating the sustainability of the proposed process from an environmental point of view by applying the Life Cycle Assessment. Various combinations of process parameters (temperature, time, and dry solid-to-water ratios) and two different utilization pathways for hydrochar (the whole amount produced in external lignite power plants or part of it used internally) are compared. The results indicate that environmental performances are mainly connected with process energy consumption: in general, the cases operating at the lowest dilution ratio and the highest temperature provide improved environmental indicators. Co-combusting all the produced hydrochar in external power plants provides better environmental performances than feeding a portion of it to the HTC itself: the avoided effects by displacing lignite are higher than the additional burdens from natural gas use. Then, alternative process water treatments are compared, showing that the burdens added by the process water treatments do not offset the benefits generated by the main HTC process for the major part of the considered environmental indicators. Finally, the proposed process indicates better environmental performances when compared to the conventional method of treating the USF, based on aerobic biostabilization and landfilling.

Enhanced removal of metal-cyanide complexes from wastewater by Fe-impregnated biochar: Adsorption performance and removal mechanism

Metal-cyanide complexes are common contaminants in industrial wastewater. Removal of these refractory contaminants is essential before their discharge into the environment. This study investigated a biochar (BC)-based sorbent material that could be applied for the efficient removal of metal-cyanide complexes from wastewater. In consideration of the strong electrostatic repulsion of the pristine BC toward anions, iron-modified BC (Fe-BC) composites were fabricated by a one-step co-pyrolysis of corn straw and FeCl₃ at 600-800 °C. The adsorption performance and corresponding sorption mechanisms of representative metal-cyanide complexes (ferricyanide [Fe(CN)₆]^3- and tetracyanonickelate [Ni(CN)₄]^2-) onto the Fe-BC composites were investigated. The results indicated that the Fe-BC composites had significantly high affinity toward the metal-cyanide complexes, reaching a maximum sorption capacity of 580.96 mg/g for [Fe(CN)₆]^3- and 588.86 mg/g for [Ni (CN)₄]^2-. A mechanistic study revealed that Fe-impregnation during BC fabrication could effectively alter the negatively charged BC surface, forming more functional groups that could interact with the metal-cyanide complexes. Moreover, the transformation of carbon structure promoted the carbothermal reduction process, leading to the formation of various reductive-Fe minerals in the resulting Fe-BC composites. These modification-induced alterations to the surface and structural characteristics of BC were expected to facilitate the adsorption/precipitation of target contaminants. Different sorption mechanisms were proposed for the two metal-cyanide complexes that were the focus of this study. For [Fe(CN)₆]^3-, precipitation by Fe-bearing species in the Fe-BC composites was the major factor controlling [Fe(CN)₆]^3- removal, while for [Ni(CN)₄]^2- hydrogen bonding interactions between surface functional groups (especially hydroxyl (-OH) and carboxyl (-COOH)) and [Ni(CN)₄]^2- were the main factors controlling removal.

Release characteristics of hydrochar-derived dissolved organic matter: Effects of hydrothermal temperature and environmental conditions

Much research has been done on the preparation and application of hydrochars, but research on the release characteristics of hydrochar-derived dissolved organic matter (HDOM) is very limited; clarifying the release characteristics of HDOM is important for understanding and adjusting the environmental behaviour of hydrochar. Herein, the potential release of HDOM from rice straw-derived hydrochars prepared at different hydrothermal temperatures was investigated under various potential environmental conditions for the first time. The total release quantity and humification degree of HDOM decreased with increasing hydrothermal temperature. The critical dividing line for various hydrothermal reactions, decomposition and polymerization, was in the range of 240 °C-260 °C. Alkaline condition increased the HDOM release amount (up to 299 mg g^-1), molecular weight (as high as 423 Da) and molecular diversity (8857 compounds) from rice straw-derived hydrochars. The unique substances of HDOM released under alkaline condition were mainly distributed in lipids-like substances, CRAM/lignins-like substances, aromatic structures, and tannins-like substances, while few unique substances were found under acidic condition. Additionally, CRAM/lignins-like substances were the most abundant in all HDOM samples, reaching 82%, which were relatively stable and could achieve carbon sequestration in different environments. The findings provided a new insight on understanding the potential environment behaviors of hydrochar.

Synergistic reduction of Cr(VI) by graphite N and thiophene S of N, S-co-doped hydrochar derived from waste straw

An efficient, simple, and inexpensive N, S-co-doped hydrochar (SNHC) was synthesized from waste straw by a one-pot hydrothermal process without calcination for the removal of Cr(VI). SNHC demonstrated excellent adsorption performance for Cr(VI) and high stability, achieving a high capacity of 171.33 mg/g (293 K, pH 2) and a capacity retention of 82.73 % after five cycles. The adsorption behavior was determined as a multilayer adsorption process based on chemisorption according to the simulation the results of Freundlich adsorption isotherms and pseudo-second-order models. The characterization of SNHC revealed that graphite N and thiophene S formed by the material were the effective active sites, functioning as electron donors to contribute a significant amount of electrons to reduce Cr(VI) to Cr(III). Therefore, next to electrostatic adsorption and complexation, the synergistic reduction of Cr(VI) by graphite N and thiophene S was the main mechanism for Cr(VI) removal. Additionally, density functional theory calculations indicated a low adsorption energy of thiophene S, which increased the attractive interaction between SNHC and Cr(VI) and played the most important role in reducing Cr(VI). The mechanism of the effect of graphite N and thiophene S on Cr(VI) removal not only offered a comprehensive perspective on the role of N, S co-doped mediation in hydrochar but also provided the basic theory for its practical application.

Removal and recovery of uranium (VI) from aqueous solutions by residual sludge and its biochars

The removal and recovery of uranium (VI) from water solutions are critical for energy and environmental security. In this study, hydrochar at 100, 150, and 190 °C (HC100, HC150, and HC190) and pyrochar at 250 °C (BC250) were prepared from residual sludge (RS). The uranium (VI) adsorption behavior, recovery, and heavy metal risk of RS and its biochars were assessed. The sorption distribution coefficient of RS was higher than those of its biochars within the tested concentration range. The maximum adsorption capacity of uranium (VI) by HC190 was 121.26 mg/g at acidic pH (pH 4.5), which was higher than those of other tested biochars, previously reported unmodified biochars, and activated carbon. The zeta potential, FTIR, and XPS results implied that the adsorption of uranium (VI) by RS and its biochars was regulated by electrostatic attraction and the complexation with oxygen- and phosphorus-containing functional groups. Besides, partial reduction of uranium (VI) into uranium (IV) happened during the process of adsorption. More than 86% of the adsorbed uranium (VI) was recovered by 0.01 M hydrochloric acid and 100% by 0.01 M sodium carbonate. The leaching amount of heavy metals was greatly reduced after the sludge was converted to biochar, indicating that hydrothermal carbonization and pyrolysis can promote the stabilization of heavy metals. This work demonstrates that RS and its biochars can be implemented as low-cost, environment-friendly, and high-efficient materials for the purification of uranium (VI)-containing solutions by means of adsorption and desorption.

A review on hydrothermal carbonization of potential biomass wastes, characterization and environmental applications of hydrochar, and biorefinery perspectives of the process

It is imperative to search for appropriate processes to convert wastes into energy, chemicals, and materials to establish a circular bio-economy toward sustainable development. Concerning waste biomass valorization, hydrothermal carbonization (HTC) is a promising route given its advantages over other thermochemical processes. From that perspective, this article reviewed the HTC of potential biomass wastes, the characterization and environmental utilization of hydrochar, and the biorefinery potential of this process. Crop and forestry residues and sewage sludge are two categories of biomass wastes (lignocellulosic and non-lignocellulosic, respectively) readily available for HTC or even co-hydrothermal carbonization (Co-HTC). The temperature, reaction time, and solid-to-liquid ratio utilized in HTC/Co-HTC of those biomass wastes were reported to range from 140 to 370 °C, 0.05 to 48 h, and 1/47 to 1/1, respectively, providing hydrochar yields of up to 94 % according to the process conditions. Hydrochar characterization by different techniques to determine its physicochemical properties is crucial to defining the best applications for this material. In the environmental field, hydrochar might be suitable for removing pollutants from aqueous systems, ameliorating soils, adsorbing atmospheric pollutants, working as an energy carrier, and performing carbon sequestration. But this material could also be employed in other areas (e.g., catalysis). Regarding the effluent from HTC/Co-HTC, this byproduct has the potential for serving as feedstock in other processes, such as anaerobic digestion and microalgae cultivation. These opportunities have aroused the industry interest in HTC since 2010, and the number of industrial-scale HTC plants and patent document applications has increased. The hydrochar patents are concentrated in China (77.6 %), the United States (10.6 %), the Republic of Korea (3.5 %), and Germany (3.5 %). Therefore, considering the possibilities of converting their product (hydrochar) and byproduct (effluent) into energy, chemicals, and materials, HTC or Co-HTC could work as the first step of a biorefinery. And this approach would completely agree with circular bioeconomy principles.

Recent advances in carbon-based nanomaterials for the treatment of toxic inorganic pollutants in wastewater

Wastewater contains inorganic pollutants, generated by industrial and domestic sources, such as heavy metals, antibiotics, and chemical pesticides, and these pollutants cause many environmental problems.

Pb(II) Ion Removal Potential in Chemically Modified Ziziphus joazeiro Barks

In this study, five types of modified Ziziphus joazeiro barks were investigated for the removal of Pb(II) ions from aqueous solutions. The samples tested were natural barks, natural powder, washed with water, ethanol at 80% (EE) and 0.5 N NaOH. Batch kinetics experiments were performed under the conditions: 24−25 °C, pH 5.5−5.8, 102 mg·L−1 Pb(NO3)2, 100 rpm and 0.1 g of adsorbent, and analyses of pHpzc and Fourier transform infrared spectroscopy. All adsorbents tested showed potential to remove Pb(II) ions, but the adsorbent washed by 0.5 N NaOH obtained the highest experimental performance (25.5 mg·g−1 at 30 min), while the EE had the least performance (20.4 mg·g−1 at 60 min), and maximum removals of 99.9%. The kinetic models pointed to a probable chemisorption due to the best fit of pseudo-second order and Elovich, and Boyd’s model, suggesting that intraparticle diffusion limits the adsorption until the initial minutes of contact. The Langmuir isotherm fitted better to the experimental data for the NaOH adsorbent, with maximum adsorption capacity equal to 62.5 mg·g−1, although the Temkin model partially fitted, both suggesting the occurrence of chemisorption. The adsorption process is reversible (>81% at 20 min) and hence the adsorbents can be recycled and the Pb(II) ions recovered.

Comparison of the performance of hydrochar, raw biomass, and pyrochar as precursors to prepare porous biochar for the efficient sorption of phthalate esters

In this study, three high-performance porous biochars were synthesized by the cocarbonization of Pistia stratiotes-derived precursors (raw biomass, hydrochar and pyrochar) with potassium hydroxide and utilized for the sorption of diethyl phthalate from aqueous solution. The developed pore structure, surface functional groups, high hydrophobicity characteristic and graphene structure of porous biochars contributed to the excellent sorption quantity of up to 813 mg g^-1 (C_e, 25 mg L^-1). Among the three precursors, hydrochar-derived porous biochar showed better properties in terms of its specific surface area and hydrophobicity, and it displayed the highest sorption capacity. The sorption kinetics and isotherm experiments confirmed that pore filling and partitioning dominated the sorption capacity while the mass transfer, hydrogen bonding and π-π stacking in the hydrochar limited the sorption rate. This finding helped to propose a feasible method for the efficient utilization of invasive aquatic plants and provided novel insight into the selection of precursors for preparing porous biochars.

Effects of hydrochar derived from hydrothermal treatment of sludge and lignocellulose mixtures on soil properties, nitrogen transformation, and greenhouse gases emissions

In this study, hydrochar samples derived from hydrothermal treatment (HTT) of sludge and sludge-biomass mixtures were applied to a sandy soil and their effects on soil properties, soil nutrients, greenhouse gas (GHG) emissions, and soluble heavy metals were investigated. The application of untreated sludge and hydrochar derived from HTT of sludge at 180 °C led to the highest soluble nitrate, CO₂ and N₂O emissions, followed by the application of hydrochar samples derived from HTT of sludge-biomass mixtures at 180 °C. Although the application of hydrochar samples derived from HTT of sludge alone and sludge-biomass mixtures at 240 °C in sandy soil led to the lowest emissions of CO₂ and N₂O, it resulted in lower levels of soil electrical conductivity (EC), cation exchange capacity (CEC) and soluble phosphorus. The application of hydrochar samples derived from HTT at 240 °C led to the production of CH₄ and lower nitrate-N contents than hydrochar samples derived from HTT at 180 °C. These results indicated that the soils containing hydrochar samples from HTT at 240 °C were anaerobic, which might inhibit the growth of plants. The application of hydrochar samples derived from HTT of sludge-biomass at 180 °C led to significantly improved contents of soil soluble phosphorus (2.56 and 2.84 g kg^-1 soil) and soil nitrate-N (160.2 and 263.2 mg kg^-1 soil) at the end of 60 days of incubation. However, these contents were lower than the contents of soluble phosphorus (3.71 and 4.45 g kg^-1 soil) and nitrate-N (528.3 and 583.2 mg kg^-1 soil) with the application of untreated sludge and sludge derived from HTT of sludge alone at 180 °C. Although more studies are needed to understand the mechanisms and effects on different soils, this study provides useful insights into the application of hydrochar derived from sludge-biomass mixture in soil.

Effects of lignocellulosic biomass type on nutrient recovery and heavy metal removal from digested sludge by hydrothermal treatment

Sludge is a nutrient-rich organic waste generated from wastewater treatment plants. However, the application of sludge as a nutrient source is limited by its high contents of water and pollutants. In this study, the effects of biomass type on nutrient recovery and heavy metal removal from digested sludge by hydrothermal treatment (HTT) were investigated. Blending biomass with digested sludge for HTT at 180-240 °C increased the recovery of nitrogen in the treated solids. At the HTT temperature of 240 °C, HTT with hardwood sawdust led to the highest nitrogen recovery of 70.6%, compared to the lowest nitrogen recovery of 36.5% without biomass. Blending biomass slightly decreased the recovery of phosphorus compared to those without biomass. Nevertheless, the lowest phosphorus recovery of 91.3% with the use of hardwood sawdust at the HTT temperature of 240 °C was only ∼7.0% less than that without biomass. Blending biomass reduced the contents of macro-metals such as Ca, Fe, Mg and Al in treated solids but the metal contents varied with different biomasses. Regarding the heavy metals, the use of rice husk did not decrease the contents of Ni and Co while blending bagasse did not decrease the content of Cr at HTT temperatures of 210 °C and 240 °C compared to the use of other biomasses. The different effects of biomass type on nutrient recovery and heavy metals were likely related to the types and abundances of organic acids such as acetic acid, oxygen-containing functional groups such as C-OH and COOH, oxide minerals such as silica from biomasses and the overall effects of these factors. This study provides very useful information in selection of lignocellulosic biomass for HTT of sludge for nutrient recovery and heavy metal removal.

Hydrothermal carbonization of the wet fraction from mixed municipal solid waste: Hydrochar characteristics and energy balance

Mixed municipal solid waste (MSW) may be pre-treated in a mechanical-biological treatment (MBT) plant to produce an exiting stream with improved combustible characteristics. The process also produces a second waste stream, which is generally separated on a size basis by industrial sieving equipment. It contains fractions with a high moisture content such as residual food waste, soiled paper and cardboard, and small fragments of other materials. Samples of this stream, collected at an existing plant, were characterized and processed by hydrothermal carbonization (HTC) at laboratory scale, at various temperatures (180, 200 and 220 °C), reaction times (1, 4 and 8 h) and solid to water ratios (0.15 and 0.07). The primary energy balance, on a hypothetical industrial scale, was performed. In brief, the results confirmed that the produced hydrochar was a brittle, hydrophobic, solid carbonaceous product which gave a better combustion performance as the residence time of the HTC process was increased. Moreover, the dewaterability of the carbonized waste was greatly improved when compared to raw, wet samples. The results of the primary energy balance confirmed that the energy contained in the produced hydrochar was higher than the energy consumption for the process itself, under all the HTC working conditions. The energy consumed in the process was in the range of 40-70 % of the energy content of the produced hydrochar.

Preparation, adsorption performance and mechanism of MgO-loaded biochar in wastewater treatment: A review

Biochar is a low cost, porous and solid material with an extremely high carbon content, various types of functional groups, a large specific surface area and many other desirable characteristics. Thus, it is often used as an adsorbent or a loading matrix. Nano-magnesium oxide is a crystalline material with small particles and strong ion exchangeability. However, due to the high surface chemical energy, it easily forms agglomerates of particles. Therefore, to combine the advantages of biochar and magnesium, metal magnesium nanoparticles can be loaded onto the surface of biochar with different modification techniques, resulting in biochars with low cost and high adsorption performance to be used as an adsorption matrix (collectively referred to as Mg@BC). This review presents the effects of different Mg@BC preparation methods and synthesis conditions and summarizes the removal capabilities and adsorption mechanisms of Mg@BC for different types of pollutants in water. In addition, the review proposes the prospects for the development of Mg@BC to solve various problems in the future.

Synthesis of polyaminophosphonated-functionalized hydrochar for efficient sorption of Pb(II)

Surface modification can effectively improve the ability of hydrochar to capture pollutants from wastewater. In this work, polyaminophosphonated-functionalized hydrochar (PAP-HC) was successfully synthesized by a chemical grafting approach and applied efficiently to adsorb aqueous Pb(II). Properties of PAP-HC were characterized by ICP, FTIR, XPS, SEM-EDS, elemental analysis, zeta potential, and BET. The Pb(II) adsorbing behavior of PAP-HC was tested by batch adsorbing assays, including the pH impact, uptake kinetics, sorption isotherms, sorption thermodynamics, and PAP-HC recycling. Sorption isotherms were better illustrated by a Langmuir equation, while the kinetic profile was modeled by a pseudo-second-order equation. Adsorption of Pb(II) onto PAP-HC mainly relied on chelating Pb(II) with aminophosphonate groups of PAP-HC by XPS and FTIR analyses. The actual adsorbed amount of PAP-HC maximized to 179.92 mg·g^-1 at 298 K, which showed high adsorption ability. Nitric acid and hydroxide solutions were suitable for desorption of adsorbed Pb(II) and activated PAP-HC, respectively. PAP-HC can be reused for at least five cycles without obvious change in adsorption performance. The results suggest PAP-HC is a prospective adsorbent to capture Pb(II) from wastewater.

Hydrothermal conversion of Chinese cabbage residue for sustainable agriculture: Influence of process parameters on hydrochar and hydrolysate

The demands on novel and sustainable techniques for vegetable waste (VW) valorization continues to increase during the past few decades due to the growing waste production under the flourishing vegetable industries. In this study, Chinese cabbage residues were hydrothermal carbonization (HTC) at 180, 200, 220 and 240 °C for 2 to 6 h to explore the impacts of process parameters on the characteristics of hydrochars and hydrolysates and their feasibility in sustainable agriculture. Results indicated that hydrothermal temperature had a greater impact on cabbage residue hydrolysis than the residence time. With the rising reaction severity, hydrochars became more alkaline with higher amount of ash and carbon (C), while the pH and dissolved organic nitrogen (DON) and NH₄⁺-N in the hydrolysate were gradually reduced. The thermogravimetric analysis (TG-DTG) indicated that organic constitutions in the feedstock went through incomplete decomposition. Although the recalcitrance index (R50) steadily increased through HTC (0.37-0.46), hydrochars were unstable and would not applicable for carbon sequestration. Furthermore, hydrochars and hydrolysate would be optimal media for plants seedling and growth for the abundant nutrients and dissolved organic compounds but reduced phytotoxicity. In conclusion, these results showed that HTC is highly applicable for vegetable waste management for sustainable agriculture.

Pristine and engineered biochar for the removal of contaminants co-existing in several types of industrial wastewaters: A critical review

Biochar has been widely studied as an adsorbent for the removal of contaminants from wastewater due to its unique characteristics, such as having a large surface area, well-distributed pores and high abundance of surface functional groups. Critical review of the literature was performed to understand the state of research in utilizing biochars for industrial wastewater remediation with emphasis on pollutants that co-exist in wastewater from several industrial activities, such as textile, pharmaceutical and mining industries. Such pollutants include organic (such as synthetic dyes, phenolic compounds) and inorganic contaminants (such as cadmium, lead). Multiple correspondence analyses suggest that through batch equilibrium, columns or constructed wetlands, researchers have used mechanistic modelling of isotherms, kinetics, and thermodynamics to evaluate contaminant removal in either synthetic or real industrial wastewaters. The removal of organic and inorganic contaminants in wastewater by biochar follows several mechanisms: precipitation, surface complexation, ion exchange, cation-π interaction, and electrostatic attraction. Biochar production and modifications promote good adsorption capacity for those pollutants because biochar properties stemming from production were linked to specific adsorption mechanisms, such as hydrophobic and electrostatic interactions. For instance, adsorption capacity of malachite green ranged from 30.2 to 4066.9 mg g^-1 depending on feedstock type, pyrolysis temperature, and chemical modifications. Pyrolyzing biomass at above 500 °C might improve biochar quality to target co-existing pollutants. Treating biochars with acids can also improve pollutant removal, except that the contribution of precipitation is reduced for potentially toxic elements. Studies on artificial intelligence and machine learning are still in their infancy in wastewater remediation with biochars. Meanwhile, a framework for integrating artificial intelligence and machine learning into biochar wastewater remediation systems is proposed. The reutilization and disposal of spent biochar and the contaminant release from spent biochar are important areas that need to be further studied.

Efficient adsorption of methylene blue on carboxylate-rich hydrochar prepared by one-step hydrothermal carbonization of bamboo and acrylic acid with ammonium persulphate

Hydrochar (AAHC) with rich carboxylate groups was prepared by one-step hydrothermal carbonization (HTC) of bamboo and acrylic acid with the presence of ammonium persulphate, and then activated by a sodium hydroxide solution. AAHC was featured by elemental analysis, SEM, XPS, FTIR, Zeta potential analysis and N₂ adsorption-desorption isotherms, and applied to test adsorptive ability of methylene blue (MB) by batch sorption experiments. Despite a small Brunauer-Emmett-Teller (BET) surface area of 5.03 m²·g^-1, AAHC has excellent MB adsorbing capacity owing to the richness of carboxylate groups. Compared with hydrochar produced without adding ammonium persulphate, AAHC exhibits larger BET surface, pore volume and carboxylate groups, indicating a small amount of ammonium persulfate plays an important role in HTC in addition to the free radical initiator. This work provides a facile and cheap method combining HTC and polymerization for preparation of carboxylate-rich hydrochar.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

Hydrothermal Carbonization of Residual Algal Biomass for Production of Hydrochar as a Biobased Metal Adsorbent

Conversion of residual algal biomass to value-added products is essential for enhancing the economics of algae cultivation. Algal hydrochar produced via hydrothermal carbonization of lipid-extracted Picochlorum oculatum is a material rich in oxygen functional groups and carbon (up to 67.3%) and hence a promising candidate for remediation of wastewaters. The hydrothermal carbonization conditions were optimized and the adsorption capacity of the hydrochar was tested for metal removal. By the end of the remediation process, cumulative removal of Al3+, Cu2+, Fe2+, Mg2+, Mn2+, and Pb2+ reached 89, 98, 75, 88, 75, and 100%, respectively. The adsorption of all metals was found to follow pseudo second-order kinetics and the Langmuir isotherm. Overall, when hydrothermal carbonization is applied to lipid-extracted algae, it generates a promising biobased adsorbent with value-added potential in metal remediation.

Characterization of Bio-Adsorbents Produced by Hydrothermal Carbonization of Corn Stover: Application on the Adsorption of Acetic Acid from Aqueous Solutions

In this work, the influence of temperature on textural, morphological, and crystalline characterization of bio-adsorbents produced by hydrothermal carbonization (HTC) of corn stover was systematically investigated. HTC was conducted at 175, 200, 225, and 250 °C, 240 min, heating rate of 2.0 °C/min, and biomass-to-H2O proportion of 1:10, using a reactor of 18.927 L. The textural, morphological, crystalline, and elemental characterization of hydro-chars was analyzed by TG/DTG/DTA, SEM, EDX, XRD, BET, and elemental analysis. With increasing process temperature, the carbon content increased and that of oxygen and hydrogen diminished, as indicated by elemental analysis (C, N, H, and S). TG/DTG analysis showed that higher temperatures favor the thermal stability of hydro-chars. The hydro-char obtained at 250 °C presented the highest thermal stability. SEM images of hydro-chars obtained at 175 and 200 °C indicated a rigid and well-organized fiber structure, demonstrating that temperature had almost no effect on the biomass structure. On the other hand, SEM images of hydro-chars obtained at 225 and 250 °C indicated that hydro-char structure consists of agglomerated micro-spheres and heterogeneous structures with nonuniform geometry (fragmentation), indicating that cellulose and hemi-cellulose were decomposed. EDX analysis showed that carbon content of hydro-chars increases and that of oxygen diminish, as process temperature increases. The diffractograms (XRD) identified the occurrence of peaks of higher intensity of graphite (C) as the temperature increased, as well as a decrease of peaks intensity for crystalline cellulose, demonstrating that higher temperatures favor the formation of crystalline-phase graphite (C). The BET analysis showed 4.35 m2/g surface area, pore volume of 0.0186 cm3/g, and average pore width of 17.08 μm. The solid phase product (bio-adsorbent) obtained by hydrothermal processing of corn stover at 250 °C, 240 min, and biomass/H2O proportion of 1:10, was activated chemically with 2.0 M NaOH and 2.0 M HCl solutions to investigate the adsorption of CH3COOH. The influence of initial acetic acid concentrations (1.0, 2.0, 3.0, and 4.0 mg/mL) was investigated. The kinetics of adsorption were investigated at different times (30, 60, 120, 240, 480, and 960 s). The adsorption isotherms showed that chemically activated hydro-chars were able to recover acetic acid from aqueous solutions. In addition, activation of hydro-char with NaOH was more effective than that with HCl.

Microwave-assisted catalytic hydrothermal carbonization of Laminaria japonica for hydrochars catalyzed and activated by potassium compounds

There are limited investigations describing preparation and application of alga-based hydrochars via microwave-assisted catalytic hydrothermal carbonization (MA-CHTC). Therefore, hydrochars were successfully prepared from macroalgae biomass Laminaria japonica impregnated with KH2PO4, KCl, K2CO3, and KOH as acidic, neutral salt, and alkaline catalysts, respectively, via the MA-CHTC. Comprehensive characterization of physicochemical properties of the hydrochars, including yields, elemental and phase composition, specific surface areas, functional groups, and morphology, confirmed different catalytic effects of these catalysts on hydrochar formation. Adsorption kinetics and isotherms of Pb(II) revealed significant improvement of adsorption capacities for Pb(II) due to synergetic chemical activation of the spiked catalysts. Therefore, the synergetic catalytic effects and chemical activation is benefic for tailored design of engineered hydrochars with different properties for special application through selection of catalysts during the MA-CHTC process.

Arsenic removal via a novel hydrochar from livestock waste co-activated with thiourea and γ-Fe2O3 nanoparticles

Arsenic (As) contaminants post tremendous threats to environment safety. Pristine hydrochar (PHC), thiourea-activated hydrochar (THC), and thiourea-Fe(NO₃)₃-activated hydrochar (Fe₂O₃@THC) were fabricated from dairy cattle manure via one-pot hydrothermal carbonization at 250 ℃ and applied for aqueous As(V) removal. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) were conducted to characterize hydrochars and As(V) adsorption. Thiourea increased N and S functional groups (-NH₂, C-N, C=S and S=O). Fe(NO₃)₃ introduced γ-Fe₂O₃ nanoparticles and provided Fe₂O₃@THC with Fe-O. The combination of thiourea and Fe(NO₃)₃ granted Fe₂O₃@THC with the largest surface area (33.45 m²/g), and the highest total pore volume (0.095 cm³/g) among three hydrochars. As(V) adsorption was a physicochemical process involving electrostatic attraction, complexation, ion exchange and H-bond interaction. The maximum As(V) adsorption capacities and partition coefficients decreased as follows: Fe₂O₃@THC (44.80 mg/g; 38.44 L/g) > THC (38.77 mg/g; 5.94 L/g) > PHC (19.05 mg/g; 1.17 L/g). Three hydrochars exhibited preferable reusability in NaOH solution with only 24.2%, 11.8% and 14.1% decrease in adsorption rates after four cycles for PHC, THC and Fe₂O₃@THC, respectively. Fe₂O₃@THC is a promising adsorbent for efficient As(V) removal. This study explored the efficient As(V) removal by activated hydrochars with future research potential.

Preparation of hydrochar with high adsorption performance for methylene blue by co-hydrothermal carbonization of polyvinyl chloride and bamboo

Polyvinyl chloride (PVC) was blended into bamboo powder during co-hydrothermal carbonization (Co-HTC) to understand the effects on the physicochemical properties and adsorbing ability of hydrochar. The properties of hydrochar were characterized by Zeta potential, elemental analyses, BET, FTIR, XPS, Boehm titration and SEM. The addition of PVC into bamboo in Co-HTC decreased the BET area, and pore volume and radius of hydrochar, but increased the contents of surface hydroxyl and carboxyl groups. The adsorption ability of hydrochar produced by addition of PVC at 473 K over methylene blue (MB) increased significantly. The main adsorption mechanism was electrostatic attraction by -N(CH₃)₂⁺ of MB and carboxylate of hydrochar, and hydrogen-bonding interaction through N atom of phenothiazine in MB and C-OH of hydrochar. Thus, Co-HTC offers a facile, green and economical alternative for conversion of waste into high-value adsorbents.

Effect of Sonochemical Treatment on Thermal Stability, Elemental Mercury (Hg0) Removal, and Regenerable Performance of Magnetic Tea Biochar

Elemental mercury (Hg⁰) removal from a hot gas is still challenging since high temperature influences the Hg⁰ removal and regenerable performance of the sorbent. In this work, a facile yet innovative sonochemical method was developed to synthesize a thermally stable magnetic tea biochar to capture the Hg⁰ from syngas. A sonochemically synthesized magnetic sorbent (TUF_0.46) exhibited a more prodigious surface area with developed pore structures, ultra-paramagnetic properties, and high dispersion of Fe₃O₄/γ-Fe₂O₃ particles than a simply synthesized magnetic sorbent (TF_0.46). The results showed that TUF_0.46 demonstrated strong thermostability and attained a high Hg⁰ removal performance (∼98.6%) at 200 °C. After the 10th adsorption/regeneration cycle, the Hg⁰ removal efficiency of TUF_0.46 was 19% higher than that of TF_0.46. Besides, at 23.1% Hg⁰ breakthrough, TUF_0.46 achieved an average Hg⁰ adsorption capacity of 16.58 mg/g within 24 h under complex syngas (20% CO, 20% H₂, 5% H₂O, and 400 ppm H₂S). In addition, XPS results revealed that surface-active components (Fe⁺, O^2-, O*, C=O) were the key factor for high Hg⁰ removal performance over TUF_0.46 from syngas. Hence, sonochemistry is a promising practical tool for improving the surface morphology, thermal resistance, renewability, and Hg⁰ removal efficiency of a sorbent.

One-Pot Synthesis of Nano CuO-ZnO Modified Hydrochar Derived from Chitosan and Starch for the H2S Conversion

A novel kind of hydrochar adsorbent, modified by CuO-ZnO and derived from chitosan or starch, was synthesized for H2S adsorption. The prepared adsorbent was characterized by BET, XRD, EDX, SEM, and XPS. The results showed that the modified hydrochar contained many amino groups as functional groups, and the nanometer metal oxide particles had good dispersion on the surface of the hydrochar. The maximum sulfur capacity reached 28.06 mg/g-adsorbent under the optimized conditions. The amine group significantly reduced the activation energy between H2S and CuO-ZnO conducive to the rapid diffusion of H2S among the lattices. Simultaneously, cationic polyacrylamide as a steric stabilizer could change the formation process of CuO and ZnO nanoparticles, which made the particle size smaller, enabling them to react with H2S sufficiently easily. This modified hydrochar derived from both chitosan and starch could be a promising adsorbent for H2S removal.