A new generation of flowerlike horseradish peroxides as a nanobiocatalyst for superior enzymatic activity

The Formation of D-Allulose 3-Epimerase Hybrid Nanoflowers and Co-Immobilization on Resins for Improved Enzyme Activity, Stability, and Processability

As a low-calorie sugar, D-allulose is produced from D-fructose catalyzed by D-allulose 3-epimerase (DAE). Here, to improve the catalytic activity, stability, and processability of DAE, we reported a novel method by forming organic-inorganic hybrid nanoflowers (NF-DAEs) and co-immobilizing them on resins to form composites (Re-NF-DAEs). NF-DAEs were prepared by combining DAE with metal ions (Co2+, Cu2+, Zn2+, Ca2+, Ni2+, Fe2+, and Fe3+) in PBS buffer, and were analyzed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, and X-ray diffraction. All of the NF-DAEs showed higher catalytic activities than free DAE, and the NF-DAE with Ni2+ (NF-DAE-Ni) reached the highest relative activity of 218%. The NF-DAEs improved the thermal stability of DAE, and the longest half-life reached 228 min for NF-DAE-Co compared with 105 min for the free DAE at 55 °C. To further improve the recycling performance of the NF-DAEs in practical applications, we combined resins and NF-DAEs to form Re-NF-DAEs. Resins and NF-DAEs co-effected the performance of the composites, and ReA (LXTE-606 neutral hydrophobic epoxy-based polypropylene macroreticular resins)-based composites (ReA-NF-DAEs) exhibited outstanding relative activities, thermal stabilities, storage stabilities, and processabilities. The ReA-NF-DAEs were able to be reused to catalyze the conversion from D-fructose to D-allulose, and kept more than 60% of their activities after eight cycles.

Enzyme hybrid nanoflowers and enzyme@metal-organic frameworks composites: fascinating hybrid nanobiocatalysts

Hybrid nanomaterials have recently emerged as a new interface of nanobiocatalysis, serving as a host platform for enzyme immobilization. Enzyme immobilization in inorganic crystal nanoflowers and metal-organic frameworks (MOFs) has sparked the bulk of scientific interest due to their superior performances. Many breakthroughs have been achieved recently in the preparation of various types of enzyme@MOF and enzyme-hybrid nanoflower composites. However, it is unfortunate that there are few reviews in the literature related to enzyme@MOF and enzyme-hybrid nanoflower composites and their improved synthesis strategies and their applications in biotechnology. In this review, innovative synthetic strategies for enzyme@MOF composites and enzyme-hybrid nanoflower composites are discussed. Enzyme@MOF composites and enzyme-hybrid nanoflower composites are reviewed in terms of biotechnological applications and potential research directions. We are convinced that a fundamental study and application of enzyme@MOF composites and enzyme-hybrid nanoflower composites will be understood by the reader as a result of this work. The summary of different synthetic strategies for enzyme@MOF composites and enzyme-hybrid nanoflower composites and the improvement of their synthetic strategies will also benefit the readers and provide ideas and thoughts in the future research process.

Rational design of EDTA-incorporated nanoflowers as novel and effective endodontic disinfection against biofilms

The ethylenediaminetetradiacetic acid (EDTA) is one of the most commonly used irrigation solutions. Although EDTA has a very low antimicrobial property, it is used to remove inorganic part of smear layer in areas of root canal system. Herein, we developed EDTA-incorporated nanoflowers (EDTA NFs), for the first time, as novel and effective irrigation solution with quite high antimicrobial property to provide complete disinfection in root canal system. We both systematically elucidated the formation of the EDTA NFs with various techniques, and their catalytic and antimicrobial activities in the presence of hydrogen peroxide (H2O2) were documented through intrinsic EDTA property and peroxidase-like activities.

Encapsulation of Enzymes into Hydrophilic and Biocompatible Metal Azolate Framework: Improved Functions of Biocatalyst in Cascade Reactions and its Sensing Applications

Multiple enzyme-triggered cascade biocatalytic reactions are vital in vivo or vitro, considering the basic biofunction preservation in living organisms and signals transduction for biosensing platforms. Encapsulation of such enzymes into carrier endows a sheltering effect and can boost catalytic performance, although the selection and preparation of an appropriate carrier is still a concern. Herein, focusing on MAF-7, a category of metal azolate framework (MAF) with superiority against the topologically identical ZIF-8, this enzyme@MAF system can ameliorate the sustainability of encapsulating natural enzymes into carriers. The proposed biocatalyst composite AChE@ChOx@MAF-7/hemin is constructed via one-pot in situ coprecipitation method. Subsequently, MAF-7 is demonstrated to exhibit an excellent capacity of the carrier and protection against external factors in the counterpart of ZIF-8 through encapsulated and free enzymes. In addition, detections for specific substrates or inhibitors with favorable sensitivity are accomplished, indicating that the properties above expectation of different aspects of the established platform are successfully realized. This biofunctional composite based on MAF-7 can definitely provide a potential approach for optimization of cascade reaction and enzyme encapsulation.

Novel biocatalysts based on enzymes in complexes with nano- and micromaterials

In today's world, there is a wide array of materials engineered at the nano- and microscale, with numerous applications attributed to these innovations. This review aims to provide a concise overview of how nano- and micromaterials are utilized for enzyme immobilization. Enzymes act as eco-friendly biocatalysts extensively used in various industries and medicine. However, their widespread adoption faces challenges due to factors such as enzyme instability under different conditions, resulting in reduced effectiveness, high costs, and limited reusability. To address these issues, researchers have explored immobilization techniques using nano- and microscale materials as a potential solution. Such techniques offer the promise of enhancing enzyme stability against varying temperatures, solvents, pH levels, pollutants, and impurities. Consequently, enzyme immobilization remains a subject of great interest within both the scientific community and the industrial sector. As of now, the primary goal of enzyme immobilization is not solely limited to enabling reusability and stability. It has been demonstrated as a powerful tool to enhance various enzyme properties and improve biocatalyst performance and characteristics. The integration of nano- and microscale materials into biomedical devices is seamless, given the similarity in size to most biological systems. Common materials employed in developing these nanotechnology products include synthetic polymers, carbon-based nanomaterials, magnetic micro- and nanoparticles, metal and metal oxide nanoparticles, metal-organic frameworks, nano-sized mesoporous hydrogen-bonded organic frameworks, protein-based nano-delivery systems, lipid-based nano- and micromaterials, and polysaccharide-based nanoparticles.

Controllable Synthesis of Hemoglobin-Metal Phosphate Organic-Inorganic Hybrid Nanoflowers and Their Applications in Biocatalysis

In recent years, organic-inorganic hybrid nanoflower technology has become an effective method for enzyme immobilization. Here, seven hierarchical flower-like hemoglobin-phosphate organic-inorganic hybrid nanomaterials (Hb-M3(PO4)2·nH2O HNFs) were synthesized through an improved universal one-pot wet-chemical method, with Ca2+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+ and Zn2+ as inorganic components. In this synthesis process, the metal cations are successively involved in the coordination reaction with Hb and the metathesis reaction to generate phosphate precipitation. The coordination ability of metal cations and the generation rate of phosphate precipitations were evaluated, then the progress of the two chemical reactions was controlled synchronously by adjusting the phosphate buffer (PB) concentration, and finally a flower-like structure conducive to substrate diffusion and transport was obtained. Due to the conformational transformation of hemoglobin and the abundant Cu2+/Fe3+ active sites, the hemoglobin-Cu3(PO4)2·3H2O nanoflowers have extremely high catalytic activity, which is ∼14 times that of Hb. Importantly, this method is suitable for the monometallic-ionic, polymetallic-ionic and polyvalent metal-ion nanoflowers, which broadens the chemical composition and structural diversity of nanoflowers.

Preparation and investigation of novel endopeptidase-exopeptidase co-immobilized nanoflowers with improved cascade hydrolysis

Enzymatic hydrolysis is a promising approach for protein and food processing. However, the efficiency of this approach is constrained by the self-hydrolysis, self-agglomeration of free enzymes and the limited applicability resulted from enzymes' selectivityt. Here, novel organic-inorganic hybrid nanoflowers (AY-10@AXH-HNFs) were prepared by coordinating Cu2+ with both endopeptidase of PROTIN SD-AY10 and exopeptidase of Prote AXH. The results indicate that the AY-10@AXH-HNFs exhibited 4.1 and 9.6 times higher catalytic activity than free Prote AXH and PROTIN SD-AY10, respectively, for the enzymatic hydrolysis of N-benzoyl-L-arginine ethyl ester (BAEE). The kinetic parameters of Km, Vmax and Kcat/Km by AY-10@AXH-HNFs were determined to be 0.6 mg/mL, 6.8 mL·min/mg and 6.1 mL/(min·mg), respectively, surpassing the values obtained from free endopeptidase and exopeptidase. Furthermore, the ability of AY-10@AXH-HNFs to retain 41 % of their initial catalytic activity after undergoing 5 cycles of repeated use confirmed their stability and reusability. This study introduces a novel approach of co-immobilizing endopeptidase and exopeptidase on nanoflowers, resulting in significantly enhanced stability and reusability of the protease in catalytic applications.

Formation of Umbilicaria decussata (Antarctic and Turkey) Extracts Based Nanoflowers with Their Peroxidase Mimic, Dye Degradation and Antimicrobial Properties

This work describes a unique and environmentally friendly approach for creating three-dimensional (3D) organic-inorganic flower shaped hybrid nanostructures called "nanoflower (NF)" by using Umbilicaria decussate (U. decussate) extract and copper ions (Cu2+ ). U. decussate species were collected from certain place in Antarctic and Turkey and extraction of each species were completed in methanol and water. The U. decussate extracts were used as organic components and Cu2+ acted as inorganic components for formation of U. decussate extracts based hybrid NFs. We rationally used these NFs as novel nanobiocatalyst and antimicrobial agents. These NFs exhibited peroxidase mimic, dye degradation and antimicrobial properties. The NFs were characterized with various techniques. For instance, the morphologies of the NFs were monitored by scanning electron microscope (SEM), presence of elements in the NFs were presented using Energy Dispersive X-Ray Analysis (EDX). Fourier-transform infrared spectroscopy (FT-IR) was used to elucidate corresponding bending and stretching of bonds in the NFs. The NFs acted as effective Fenton agents in the presence of hydrogen peroxide, and we demonstrated their peroxidase-like activity against guaiacol, dye degradation property towards malachite green and antimicrobial activity for Aeromonas hydrophila, Aeromonas sobria, Escherichia coli, Salmonella enterica and Staphylococcus aureus.

Immobilization of Bacillus amyloliquefaciens protease "Neutrase" as hybrid enzyme inorganic nanoflower particles: A new biocatalyst for aldol-type and multicomponent reactions

Organic-inorganic hybrid nanoflowers (hNFs) with commercial protease "Neutrase" is proposed and characterized as efficient and green biocatalysts for promiscuous catalysis in aldol-type and multicomponent reactions. Neutrase hNFs [Neutrase-(Cu/Ca/Co/Mn)₃(PO₄)₂] are straightforwardly prepared through mixing metal ion (Cu²⁺, Ca²⁺, Co²⁺ or Mn²⁺) aqueous solutions with Neutrase in phosphate buffer (pH 7.4, 10 mM) resulting in precipitation (3 days). The hNFs were characterized by various techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX), element mapping, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In SEM images, the metal-Neutrase complexes revealed flower-like or granular structures after hybridization. The effect of metal ions and enzyme concentrations on the morphology and enzyme activity of the Neutrase-hNFs was examined. The synthesized Neutrase-Mn hNFs showed superior activity and stability compared to free Neutrase. Traditional organic CC coupling reactions such as aldol condensation, decarboxylative aldol, Knoevenagel, Hantzsch-type reactions and synthesis of 4H-pyran derivatives were used to test the generality and scope of Neutrase promiscuity, while optimizing conditions for the Neutrase-Mn hNF biocatalyst. Briefly, Neutrase-Mn₃(PO₄)₂ hNFs showed excellent enzyme activity, stability and reusability, qualifying as effective reusable catalysts for coupling reactions under mild conditions.

Ultrafast synthesis of laccase-copper phosphate hybrid nanoflowers for efficient degradation of tetracycline antibiotics

The presence of antibiotics in the environment causes increasing attention due to their potential risks to ecosystems and public health. Laccases are versatile oxidases capable of degrading various organic contaminants including pharmaceuticals. However, the performance of bacterial laccases on tetracycline antibiotics (TCs) degradation is seldom investigated. In this work, a bacterial laccase from Bacillus amyloliquefaciens was immobilized as laccase-inorganic hybrid nanoflowers (Lac-hNFs) by a facile and rapid method. The immobilized laccase was employed to remove different TCs including tigecycline, which is a third-generation TC that its degradation by laccase has not been reported. Lac-hNFs were synthesized by sonication-mediated self-assembly of laccase and copper ions in 5 min at room temperature. About 95% of laccase could be encapsulated in the nanoflowers, and the obtained Lac-hNFs exhibited great enhancement in stability under harsh conditions. The immobilized laccase showed a half-life of 11.7 h at 60 °C, which was about 1.4-fold higher than that of the free enzyme. Meanwhile, Lac-hNFs retained 81% of the initial activity after incubation at 25 °C for 10 days. The laccase in combination with acetosyringone could efficiently decompose tetracycline, doxycycline, and tigecycline. More than 79% of the three TCs were transformed in 1 h. Compared with the free enzyme, Lac-hNFs demonstrated higher capacity in the removal of TCs. Furthermore, Lac-hNFs remained their high degradation capacity after five cycles of reuse. Bacterial growth inhibition test revealed that most of the toxicity of TCs was eliminated after Lac-hNFs treatment. The main transformation products were identified by LC-MS, and the possible degradation pathways were proposed. The interaction mechanism between laccase and TCs was also analyzed using molecular docking. This work provides an efficient way to remove toxic organic pollutants.

Biological oxidation methods for the removal of organic and inorganic contaminants from wastewater: A comprehensive review

Enzyme-based bioremediation is a simple, cost-effective, and environmentally friendly method for isolating and removing a wide range of environmental pollutants. This study is a comprehensive review of recent studies on the oxidation of pollutants by biological oxidation methods, performed individually or in combination with other methods. The main bio-oxidants capable of removing all types of pollutants, such as organic and inorganic molecules, from fungi, bacteria, algae, and plants, and different types of enzymes, as well as the removal mechanisms, were investigated. The use of mediators and modification methods to improve the performance of microorganisms and their resistance under harsh real wastewater conditions was discussed, and numerous case studies were presented and compared. The advantages and disadvantages of conventional and novel immobilization methods, and the development of enzyme engineering to adjust the content and properties of the desired enzymes, were also explained. The optimal operating parameters such as temperature and pH, which usually lead to the best performance, were presented. A detailed overview of the different combination processes was also given, including bio-oxidation in coincident or consecutive combination with adsorption, advanced oxidation processes, and membrane separation. One of the most important issues that this study has addressed is the removal of both organic and inorganic contaminants, taking into account the actual wastewaters and the economic aspect.

Inorganic Nanoflowers—Synthetic Strategies and Physicochemical Properties for Biomedical Applications: A Review

Nanoflowers, which are flower-shaped nanomaterials, have attracted significant attention from scientists due to their unique morphologies, facile synthetic methods, and physicochemical properties such as a high surface-to-volume ratio, enhanced charge transfer and carrier immobility, and an increased surface reaction efficiency. Nanoflowers can be synthesized using inorganic or organic materials, or a combination of both (called a hybrid), and are mainly used for biomedical applications. Thus far, researchers have focused on hybrid nanoflowers and only a few studies on inorganic nanoflowers have been reported. For the first time in the literature, we have consolidated all the reports on the biomedical applications of inorganic nanoflowers in this review. Herein, we review some important inorganic nanoflowers, which have applications in antibacterial treatment, wound healing, combinatorial cancer therapy, drug delivery, and biosensors to detect diseased conditions such as diabetes, amyloidosis, and hydrogen peroxide poisoning. In addition, we discuss the recent advances in their biomedical applications and preparation methods. Finally, we provide a perspective on the current trends and potential future directions in nanoflower research. The development of inorganic nanoflowers for biomedical applications has been limited to date. Therefore, a diverse range of nanoflowers comprising inorganic elements and materials with composite structures must be synthesized using ecofriendly synthetic strategies.

Detection and Difference Analysis of the Enzyme Activity of Colloidal Gold Nanoparticles With Negatively Charged Surfaces Prepared by Different Reducing Agents

Nanozymes are particles with diameters in the range of 1–100 nm, which has been widely studied due to their biological enzyme-like properties and stability that natural enzymes do not have. In this study, several reducing agents with different structures (catechol (Cc), hydroquinone (Hq), resorcinol (Rs), vitamin C (Vc), pyrogallic acid (Ga), sodium citrate (Sc), sodium malate (Sm), and sodium tartrate (St)) were used to prepare colloidal gold with a negative charge and similar particle size by controlling the temperature and pH. The affinity analysis of the substrate H2O2 and TMB showed that the order of activities of colloidal gold Nanozymes prepared by different reducing agents was Cc, Hq, Rs, Vc, Ga, Sc, Sm, St. It was also found that the enzyme activity of colloidal gold reduced by benzene rings is higher than that of the colloidal gold enzyme reduced by linear chains. Finally, we discussed the activity of the colloidal gold peroxidase based on the number and position of isomers and functional groups; and demonstrated that the nanozymes activity is affected by the surface activity of colloidal gold, the elimination of hydroxyl radicals and the TMB binding efficiency.

Synthesis of taurine-Cu3(PO4)2 hybrid nanoflower and their peroxidase-mimic and antimicrobial properties

Herein, we report the synthesis of taurine incorporated (sulfur containing organic molecule derived from methionine and cysteine) hybrid nanoflowers (thNFs) with an intrinsic peroxidase-mimic and antimicrobial activities in the presence of H₂O₂. Formation of thNFs using non-enzyme molecules was for the first time and systematically studied as a function of the taurine concentration, types of metal ions (Cu²⁺, Fe²⁺ and Fe³⁺) and pH values of reaction solution. The peroxidase like activities of thNFs rely on Fenton-like reaction against guaiacol used as a model substrate. The efficiency of Fenton reaction can be attributed to porous structure and presence of ions of transition elements in the thNFs. The thNFs were further characterized using FTIR, XRD, SEM and EDX. The thNFs also showed remarkable antimicrobial properties against S. aureus, E. coli, B. cereus and C. albicans. We claim that nonprotein-based NFs can be considered as new generation nano-biocatalysts as an alternative to enzymes and can be used in various medicinal, biochemical, immunological, biotechnological, and industrial applications.

Organic-inorganic epoxide hydrolase hybrid nanoflowers with enhanced catalytic activity: Hydrolysis of styrene oxide to 1-phenyl-1,2-ethanediol

Epoxide hydrolases are ubiquitous in nature and are utilized to catalyze the cofactor-independent hydrolysis of epoxides to their corresponding diols. These enzymes have tremendous potential and have been applied in the synthesis of bulk and fine chemical industry and utilized as chiral building blocks. Herein, we report a green, facile, and economical method for immobilization of epoxide hydrolase based on biomimetic mineralization. The organic-inorganic hybrid nanoflowers have received tremendous attention due to their higher catalytic activity and stability. The nanoflowers were synthesized, with the organic component being enzyme epoxide hydrolase and the inorganic component being Ca²⁺ ions. A unique hierarchical flower-like spherical structure with hundreds of spiked petals was observed. The synthesized nanoflowers were applied for styrene oxide hydrolysis, producing 1-phenyl-1,2-ethanediol. Further, the factors influencing the morphology, catalytic activity, and stability studies were performed to study the activity recovery of the synthesized organic-inorganic hybrid epoxide hydrolase nanoflowers. The findings will have interesting applications.

Recent advances in enzyme-enhanced immunosensors

Among the products for rapid detection in different fields, enzyme-based immunosensors have received considerable attention. Recently, great efforts have been devoted to enhancing the output signals of enzymes through different strategies that can significantly improve the sensitivity of enzyme-based immunosensors for the need of practical applications. In this manuscript, the significance of enzyme-based signal transduction patterns in immunoassay and the central role of enzymes in achieving precise control of reaction systems are systematically described. In view of the rapid development of this field, we classify these strategies based on the combination of immune recognition and enzyme amplification into three categories, namely enzyme-based enhancement strategies, combination of the catalytic amplification of enzymes with other signal amplification methods, and substrate-based enhancement strategies. The current focus and future direction of enzyme-based immunoassays are also discussed. This article is not exhaustive, but focuses on the latest advances in different signal generation methods based on enzyme-initiated catalytic reactions and their applications in the detection field, which could provide an accessible introduction of enzyme-based immunosensors for the community with a view to further improving its application efficiency.

1,1'-Carbonyldiimidazole-copper nanoflower enhanced collapsible laser scribed graphene engraved microgap capacitive aptasensor for the detection of milk allergen

The bovine milk allergenic protein, 'β-lactoglobulin' is one of the leading causes of milk allergic reaction. In this research, a novel label-free non-faradaic capacitive aptasensor was designed to detect β-lactoglobulin using a Laser Scribed Graphene (LSG) electrode. The graphene was directly engraved into a microgapped (~ 95 µm) capacitor-electrode pattern on a flexible polyimide (PI) film via a simple one-step CO₂ laser irradiation. The novel hybrid nanoflower (NF) was synthesized using 1,1'-carbonyldiimidazole (CDI) as the organic molecule and copper (Cu) as the inorganic molecule via one-pot biomineralization by tuning the reaction time and concentration. NF was fixed on the pre-modified PI film at the triangular junction of the LSG microgap specifically for bio-capturing β-lactoglobulin. The fine-tuned CDI-Cu NF revealed the flower-like structures was viewed through field emission scanning electron microscopy. Fourier-transform infrared spectroscopy showed the interactions with PI film, CDI-Cu NF, oligoaptamer and β-lactoglobulin. The non-faradaic sensing of milk allergen β-lactoglobulin corresponds to a higher loading of oligoaptamer on 3D-structured CDI-Cu NF, with a linear range detection from 1 ag/ml to 100 fg/ml and attomolar (1 ag/ml) detection limit (S/N = 3:1). This novel CDI-Cu NF/LSG microgap aptasensor has a great potential for the detection of milk allergen with high-specificity and sensitivity.

Understanding intricacies of bioinspired organic-inorganic hybrid nanoflowers: A quest to achieve enhanced biomolecules immobilization for biocatalytic, biosensing and bioremediation applications

The immobilization of biomolecules has been a subject of interest for scientists for a long time. The organic-inorganic hybrid nanoflowers are a new class of nanostructures that act as a host platform for the immobilization of such biomolecules. It provides better practical applicability to these functional biomolecules while also providing superior activity and reusability when catalysis is involved. These nanostructures have a versatile and straightforward synthesis process and also exhibit enzyme mimicking activity in many cases. However, this facile synthesis involves many intricacies that require in-depth analysis to fully attain its potential as an immobilization technique. A complete account of all the factors involving the synthesis process optimisation is essential to be studied to make it commercially viable. This paper explores all the different aspects of hybrid nanoflowers which sets them apart from the conventional immobilization techniques while also giving an overview of its wide range of applications in industries.

Understanding Design Rules for Optimizing the Interface between Immobilized Enzymes and Random Copolymer Brushes

A long-standing goal in the field of biotechnology is to develop and understand design rules for the stabilization of enzymes upon immobilization to materials. While immobilization has sometimes been successful as a strategy to stabilize enzymes, the design of synthetic materials that stabilize enzymes remains largely empirical. We sought to overcome this challenge by investigating the mechanistic basis for the stabilization of immobilized lipases on random copolymer brush surfaces comprised of poly(ethylene glycol) methacrylate (PEGMA) and sulfobetaine methacrylate (SBMA), which represent novel heterogeneous supports for immobilized enzymes. Using several related but structurally diverse lipases, including Bacillus subtilis lipase A (LipA), Rhizomucor miehei lipase, Candida rugosa lipase, and Candida antarctica lipase B (CALB), we showed that the stability of each lipase at elevated temperatures was strongly dependent on the fraction of PEGMA in the brush layer. This dependence was explained by developing and applying a new algorithm to quantify protein surface hydrophobicity, which involved using unsupervised cluster analysis to identify clusters of hydrophobic atoms. Characterization of the lipases showed that the optimal brush composition correlated with the free energy of solvation per enzyme surface area, which ranged from -17.1 kJ/mol·nm² for LipA to -11.8 kJ/mol·nm² for CALB. Additionally, using this algorithm, we found that hydrophobic patches consisting of aliphatic residues had a higher free energy than patches consisting of aromatic residues. By providing the basis for rationally tuning the interface between enzymes and materials, this understanding will transform the use of materials to reliably ruggedize enzymes under extreme conditions.

Enzyme-Loaded Flower-Shaped Nanomaterials: A Versatile Platform with Biosensing, Biocatalytic, and Environmental Promise

As a result of their unique structural and multifunctional characteristics, organic-inorganic hybrid nanoflowers (hNFs), a newly developed class of flower-like, well-structured and well-oriented materials has gained significant attention. The structural attributes along with the surface-engineered functional entities of hNFs, e.g., their size, shape, surface orientation, structural integrity, stability under reactive environments, enzyme stabilizing capability, and organic-inorganic ratio, all significantly contribute to and determine their applications. Although hNFs are still in their infancy and in the early stage of robust development, the recent hike in biotechnology at large and nanotechnology in particular is making hNFs a versatile platform for constructing enzyme-loaded/immobilized structures for different applications. For instance, detection- and sensing-based applications, environmental- and sustainability-based applications, and biocatalytic and biotransformation applications are of supreme interest. Considering the above points, herein we reviewed current advances in multifunctional hNFs, with particular emphasis on (1) critical factors, (2) different metal/non-metal-based synthesizing processes (i.e., (i) copper-based hNFs, (ii) calcium-based hNFs, (iii) manganese-based hNFs, (iv) zinc-based hNFs, (v) cobalt-based hNFs, (vi) iron-based hNFs, (vii) multi-metal-based hNFs, and (viii) non-metal-based hNFs), and (3) their applications. Moreover, the interfacial mechanism involved in hNF development is also discussed considering the following three critical points: (1) the combination of metal ions and organic matter, (2) petal formation, and (3) the generation of hNFs. In summary, the literature given herein could be used to engineer hNFs for multipurpose applications in the biosensing, biocatalysis, and other environmental sectors.

Organic-Inorganic Hybrid Nanoflower Production and Analytical Utilization: Fundamental to Cutting-Edge Technologies

Over the past decade, science has experienced a growing rise in nanotechnology with ground-breaking contributions. Through various laborious technologies, nanomaterials with different architectures from 0 D to 3 D have been synthesized. However, the 3 D flower-like organic-inorganic hybrid nanomaterial with the most direct one-pot green synthesis method has attracted widespread attention and instantly become research hotspot since its first allusion in 2012. Mild synthesis procedure, high surface-to-volume ratio, enhanced enzymatic activity and stability are the main factor for its rapid development. However, its lower mechanical strength, difficulties in recovery from the reaction system, lower loading capacity, poor reusability and accessibility of enzymes are fatal, which hinders its wide application in industry. This review first discusses the selection of non-enzymatic biomolecules for the synthesis of hybrid nanoflowers followed by the innovative advancements made in organic-inorganic hybrid nanoflowers to overcome aforementioned issues and to enhance their extensive downstream applications in transduction technologies. Besides, the role of hybrid nanoflower has been successfully utilized in many fields including, water remediation, biocatalyst, pollutant adsorption and decolourization, nanoreactor, biosensing, cellular uptake and others, accompanied with several quantification technologies, such as ELISA, electrochemical, surface plasmon resonance (SPR), colorimetric, and fluorescence were comprehensively reviewed.

Preparation of efficient, stable, and reusable copper-phosphotriesterase hybrid nanoflowers for biodegradation of organophosphorus pesticides

Phosphotriesterase (PTE) is considered to be a good biodegradation agent for organophosphorus pesticides. However, the instability of the free PTE limits its application. In this study, the free PTE was hybridized with copper ions (Cu²⁺) to enhance its catalytic stability and activity. The acquired particles were freeze-dried after precipitation with PO₄^3- at 4 °C for 72 h. Scanning electron microscopy showed that the Cu-PTE complexes formed flower-like nanoparticles after hybridization. The characteristic peaks of both the enzyme and metal material were revealed by Fourier transform-infrared spectroscopy. X-ray diffraction analysis indicated that PTE was encapsulated in the Cu₃(PO₄)₂·3H₂O based hybrid nanoflowers. Compared with free PTE, the catalytic activity of Cu-PTE hybrid nanoflowers was significantly increased about 2.2 fold. The catalytic efficiency (k_cat/V_max) of Cu-PTE hybrid nanoflowers was 1.76 fold than that of free PTE. The stability of the immobilized PTE under thermal and pH conditions was improved and the tolerance of it to organic solvents was also enhanced. Moreover, the Cu-PTE hybrid nanoflowers still exhibited 72.3 % relative activity after ten consecutive reactions. In general, this is the first time to use copper based hybrid nanoflowers to immobilize PTE, and the immobilized enzyme shows excellent performance on OPs degradation. The Cu-PTE hybrid nanoflowers may have great potential in the biodegradation of organophosphorus compounds in future.

Flowerlike hybrid horseradish peroxidase nanobiocatalyst for the polymerization of guaiacol

In this study, the catalytic activity and stability of flowerlike hybrid horseradish peroxidase (HRP) nanobiocatalyst (HRP-Cu ²⁺ ) obtained from Cu ²⁺ ions and HRP enzyme in the polymerization reaction of guaiacol were analyzed. We demonstrated that HRP-Cu ²⁺ and hydrogen peroxide (H ₂ O ₂ ) initiator showed significantly increased catalytic activity and stability on the polymerization of guaiacol compared to that of free HRP enzyme. Poly(guaiacol) was observed with quite high yields (88%) and molecular weights (38,000 g/mol) under pH 7.4 phosphate-buffered saline (PBS) conditions at 60 °C with 5 weight% of HRP-Cu ²⁺ loading. HRP-Cu ²⁺ also shows very high thermal stability and works even at 70 °C reaction temperature; free HRP enzyme denatures at that temperature. Furthermore, HRP-Cu ²⁺ provided considerable repeated use and showed some degree of catalytic activity, even after the fourth recycle, in the polymerization of guaiacol.

Synthesis of papain–polyacrylamide hydrogel microspheres and their catalytic application

A schematic of the formation process of papain–PAHMs.

Paper-based biosensor based on phenylalnine ammonia lyase hybrid nanoflowers for urinary phenylalanine measurement

The Phenylketonuria (PKU) is an inborn defect of phenylalanine (Phe) metabolism, in which Phe accumulated in the blood causing alterations at the central nervous system. Therefore, the detection of PKU is very important for the early diagnosis of PKU patients. However, existing tests for PKU are time-consuming and require high-resource laboratories. In this study, a novel paper-based biosensor based on phenylalnine ammonia lyase (PAL) hybrid nanoflowers was constructed that provides a semi-quantitative output of the concentration of Phe from urine samples. PAL@Ca₃(PO₄)₂ hybrid nanoflowers (PAL@NF) were first prepared using PAL and Ca²⁺. Synthesis conditions of the PAL@NF on the formation of the PAL@NF were optimized. The PAL@NF exhibited 90% activity recovery under optimal condition. Compared with free PAL, the PAL@NF displayed good storage stability and increased tolerance to proteolysis. After five consecutive operating cycles, the PAL@NF still retained 73% of its initial activity, indicating excellent reusability. Furthermore, the paper-based biosensor was able to detect Phe concentration in urine samples, and exhibited good linearity to the Phe concentrations in the range from 60 to 2400 μM and the response time was only about 10 min. Therefore, the paper-based biosensor can be a promising candidate as a biosensor for the detection of PKU.

Gallic acid nanoflower immobilized membrane with peroxidase-like activity for m-cresol detection

We report fabrication of new generation nanoflowers (NFs) using gallic acid (GA) and copper (II) ions (Cu2+) acted as an organic and inorganic component, respectively with effective peroxidase mimic activities in solution and on filter membrane. Unlike the typical protein NFs synthesis mechanism, gallic acid NFs (GA-NFs) was formed via coordination reaction between carboxyl groups of GA and Cu2+. The different morphologies of the GA-NFs were acquired based upon whether the carboxyl groups in gallic acid are active or not. The peroxidase mimic activity of the GA-NFs relied on the Fenton reaction in the presence of hydrogen peroxide (H2O2) was tested towards m-cresol as a function of concentration of the GA-NFs, m-cresol, H2O2 and reaction time. Under the optimized conditions, the oxidative coupling of m-cresol with 4-aminoantipyrine (4-AAP) was catalyzed by the GA-NFs dispersed in solution and adsorbed on filter paper to form an antipyrine dye and it was visually and spectrophotometrically recorded. The m-cresol with range of 0.05-0.5 mM was detected in 10 min and 15 min by using the GA-NFs in solution and on filter paper, respectively. We demonstrated that the NFs can be produced from non-protein molecules and GA-NFs can be used as a promising nanocatalyst for a variety of applications.

Peroxidase-like activity and antimicrobial properties of curcumin-inorganic hybrid nanostructure

For the first time in this study, curcumin was utilized as an organic component reacting with Cu (II) ion (Cu2+) as an inorganic component for fabrication of curcumin based Cu hybrid nanostructure (Cu-hNs). We also systematically examined the catalytic effect towards guaiacol and antimicrobial activities of Cu-hNs towards fish pathogen bacteria. For the characterization of Cu-hNs, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectrometry (FT-IR) analysis were used. We claimed that hydroxyl group might react with Cu2+ in phosphate solution (PO4 -3) to form Cu-hNs. However, more uniform and spherical Cu-hNs were not seen owing to absence of more reactive functional groups like amine and carboxyl groups on structure of curcumin. In addition to our findings, synthesis of Cu-hNs were carried out in the various pH values to evaluate the effect of pHs on formation of Cu-hNs. The Cu-hNs exhibited remarkable catalytic activity throught the Fenton reaction in the presence of hydrogen peroxide (H2O2) and effective antimicrobial activities against Gram-positive/negative fish pathogen bacteria. In this study, cheap and efficient synthesis of nanoflowers (NFs) using plant extracts is proposed for biomedical applications rather than expensive molecules such as amino acids and DNA.

Preparation of a Copper Polyphosphate Kinase Hybrid Nanoflower and Its Application in ADP Regeneration from AMP

In this research article, we reported a self-assembly approach to prepare a copper polyphosphate kinase 2 hybrid nanoflower and established a cofactor ADP regeneration system from AMP using the nanoflower. First, the structure of the hybrid nanoflower was confirmed by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy, which indicated the successful loading of the enzyme in the hybrid nanoflower. Moreover, compared to the free enzyme, the hybrid nanoflower exhibited a better performance in ADP production and possessed wider catalytic pH and temperature ranges as well as improved storage stability. The hybrid nanoflower also exhibited well reusability, preserving 71.7% of initial activity after being used for ten cycles. In addition, the phosphorylation of glucose was conducted by utilizing ADP-dependent glucokinase coupled with the ADP regeneration system, in which the hybrid nanoflower was used for regenerating ADP from AMP. It was observed that the ADP regeneration system operated effectively at a very small amount of AMP. Thus, the hybrid nanoflower had great application potential in industrial catalytic processes that were coupled with ADP-dependent enzymes.

Green synthesis of allicin based hybrid nanoflowers with evaluation of their catalytic and antimicrobial activities

OBJECTIVE

Although organic-inorganic hybrid nanoflowers (hNFs) with much enhanced catalytic activity and stability were fabricated using proteins and enzymes, in this study, for the first time, we report synthesis of allicin and copper ion (Cu²⁺) coordinated NFs and investigate their peroxidase-like and antimicrobial activities.

RESULTS

The allicin (active ingredient of Allium sativum) and Cu²⁺ was acted as an organic and inorganic part, respectively for synthesis of the Cu-hNFs. The hNFs were characterized by various techniques. Spherical, uniform, mono-dispersed and flower-like-shaped morphology of the hNFs (synthesized at pH 5) were imaged by scanning electron microscopy. The presence of Cu metal in the hNFs was detected by energy dispersive X-ray spectroscopy. Characteristic bonds stretching and bending for structural analysis of the hNFs were carried out by Fourier transform infrared spectrometry. In terms of applications, the hNFs showed quite effective peroxidase-like activity towards to guaiacol (used as a model substrate) in the presence of hydrogen peroxide (H₂O₂) through Fenton reaction. We demonstrated that the NFs exhibited ~ 200% and ~ 500% higher catalytic activities in 1 h (hr) and 3 h (hrs) than their initial catalytic activity measured in 5 minute (min). Additionally, effective antibacterial properties of the Cu-hNFs were observed against fish pathogen bacteria (Aeromonas hydrophila, Vibrio parahaemolyticus, and Lactococcus garvieae).

CONCLUSIONS

We finally demonsrated that allicin based hybrid nanomaterial can be prepared by a relatively cheap, one step, easy and eco-friendly method. The allicin hNFs can be considered as novel Fenton agent for peroxidase like activity and bactericidal.

Building block and rapid synthesis of catecholamines-inorganic nanoflowers with their peroxidase-mimicking and antimicrobial activities

Protein incorporated flower-shaped hybrid nanostructures have received highly considerable attention due to their greatly enhanced catalytic activities and stabilities. Up to date, proteins, enzymes (mostly considered as proteins), and amino acids (as the building blocks of peptides and proteins) have been used as organic components of the hybrid nanoflowers. Herein, we present a rational strategy to rapidly form catecholamines (dopamine, epinephrine and norepinephrine)-copper ion (Cu2+) incorporated nanoflowers (cNFs) mostly in 3 hours and show their peroxidase-mimic catalytic, dye degradation and antimicrobial activities through Fenton-like reaction mechanism. We systematically studied effects of experimental parameters including catecholamine concentrations, reaction time and reaction pH values, on formation of the cNFs. We also explained that norepinephrine nanoflower (neNF) with its porous structure, high surface area, polar surface property behaves as an efficient Fenton agent by exhibiting highly much catalytic activities compared to dopamine nanoflower (dNF) and epinephrine nanoflower (epNF). We claim that the NFs formed using nonprotein molecules can be used in designing new generation nanobiocatalytics, antimicrobial agents, nanobiosensors and pharmaceutical products.

Enzyme immobilized in BioMOFs: Facile synthesis and improved catalytic performance

Biological metal-organic frameworks (BioMOFs), an emerging sub-class of MOFs, are prepared from metals and biological ligands (bioligands). Benefit from the low toxicity and good biocompatibility of bioligands, BioMOFs can be used in biomedicine and biocatalysis. In this work, a novel approach was developed for fabricating BioMOFs materials (Co-Cys BioMOFs) from cobalt salt and cystine, meanwhile nitrile hydratase (NHase) was in-situ encapsulated during the synthesis process. The obtained NHase-BioMOFs biocomposits named NHase@Co-Cys was characterized by SEM, TEM, XPS, etc. The preparation parameters and stabilities of NHase@Co-Cys were investigated. The maximum encapsulation yield and specific activity of NHase@Co-Cys were 92.71% and 139.04 U/g_{immobilized NHase}, respectively. The thermal stability of NHase@Co-Cys was improved by approximately 5-fold at 55 °C. The activity of NHase after immobilization was retained nearly 60% after incubating at pH 4.0 and 10.0 for 7 h. The NHase@Co-Cys showed similar catalytic capacity compared with free NHase in producing nicotinamide. After 7 h of reaction catalyzed by free NHase (14.51 U) and NHase@Co-Cys (12.76 U), the yield of nicotinamide was 90.94% and 86.36%, respectively. The activity of NHase@Co-Cys remained 83.85% of the original activity after recycling for 10 times. These results suggested that the NHase@Co-Cys is an effective approach to enhance the enzymatic properties and demonstrated a broad application prospect in industrial production.

Organic-inorganic nanoflowers: from design strategy to biomedical applications

Organic-inorganic hybrid nanoflowers (NF) with sizes or features on a nanoscale are a class of flower-shaped nanomaterials self-assembled from metal ions and organic components. Here, to be more specific, the organic components mainly refer to biomolecules ranging from proteins, peptides, and amino acids to DNA/RNA. Beyond their pleasing aesthetics, their unique properties and integrated functions have attracted widespread interest and made them promising candidates in the application of biomedical areas. Great efforts have been made to design and synthesize versatile functional hybrid nanoflowers. In this review, we begin with the clarification of versatile recently reported hybrid nanoflowers according to the types of metal ions and biomolecules employed. To highlight the design of organic-inorganic hybrid nanoflowers, their synthetic methods and mechanisms, structural and biological characteristics are discussed. After that, the state-of-the-art applications of hybrid nanoflowers in biomedical fields including biosensing, biocatalysis, and cancer therapy are demonstrated. In the end, we discuss the prospects of organic-inorganic hybrid nanoflowers and highlight the challenges and opportunities for future research.

Engineering enzyme-coupled hybrid nanoflowers: The quest for optimum performance to meet biocatalytic challenges and opportunities

The current industrial revolution signifies the high-value of biocatalysis engineering. Over the past decade, multiple micro- and nanostructured materials have been attempted for immobilization of enzymes to improve their catalytic properties. Conventional immobilization strategies result in improved stability, while insolubilized enzymes generally lost their activity compared to free counterparts. Recently, a new generation organic-inorganic hybrid nanoflowers with unique properties have received great attention as a novel and incentive immobilization approach owing to their simple fabrication, high biocatalytic efficiency, and enzyme stabilizing capability. The hybrid nanoflowers biocatalytic system implicates metal ions and biomolecules (enzymes). In contrast to free or conventionally immobilized enzymes, single enzyme or multi enzyme-incorporated flowers-like hybrid nanoconstructs demonstrated elevated catalytic activities and stabilities over a very broader range of experimental conditions, i.e., pHs, temperatures and salt concentration. This review discusses the recent developments in the fabrication strategies to diversifying nanoflowers, types, characteristics, and applications of organic-inorganic hybrid nanoflowers as a host platform to engineer different kinds of enzymes with requisite functionalities for biocatalysis applications in different sectors of the modern world. Based on experimental and theoretical literature data, the review is wrapped up with concluding remarks and an outlook in terms of upcoming challenges and prospects for their scale-up applications.

Rolling Circle Transcription-Amplified Hierarchically Structured Organic-Inorganic Hybrid RNA Flowers for Enzyme Immobilization

Programmable nucleic acids have emerged as powerful building blocks for the bottom-up fabrication of two- or three-dimensional nano- and microsized constructs. Here we describe the construction of organic-inorganic hybrid RNA flowers (hRNFs) via rolling circle transcription (RCT), an enzyme-catalyzed nucleic acid amplification reaction. These hRNFs are highly adaptive structures with controlled sizes, specific nucleic acid sequences, and a highly porous nature. We demonstrated that hRNFs are applicable as potential biological platforms, where the hRNF scaffold can be engineered for versatile surface functionalization and the inorganic component (magnesium ions) can serve as an enzyme cofactor. For surface functionalization, we proposed robust and straightforward approaches including in situ synthesis of functional hRNFs and postfunctionalization of hRNFs that enable facile conjugation with various biomolecules and nanomaterials (i.e., proteins, enzymes, organic dyes, inorganic nanoparticles) using selective chemistries (i.e., avidin-biotin interaction, copper-free click reaction). In particular, we showed that hRNFs can serve as soft scaffolds for β-galactosidase immobilization and greatly enhance enzymatic activity and stability. Therefore, the proposed concepts and methodologies are not only fundamentally interesting when designing RNA scaffolds or RNA bionanomaterials assembled with enzymes but also have significant implications on their future utilization in biomedical applications ranging from enzyme cascades to biosensing and drug delivery.

Development of Effective Lipase-Hybrid Nanoflowers Enriched with Carbon and Magnetic Nanomaterials for Biocatalytic Transformations

In the present study, hybrid nanoflowers (HNFs) based on copper (II) or manganese (II) ions were prepared by a simple method and used as nanosupports for the development of effective nanobiocatalysts through the immobilization of lipase B from Pseudozyma antarctica. The hybrid nanobiocatalysts were characterized by various techniques including scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy, and Fourier transform infrared spectroscopy (FTIR). The effect of the addition of carbon-based nanomaterials, namely graphene oxide and carbon nanotubes, as well as magnetic nanoparticles such as maghemite, on the structure, catalytic activity, and operational stability of the hybrid nanobiocatalysts was also investigated. In all cases, the addition of nanomaterials during the preparation of HNFs increased the catalytic activity and the operational stability of the immobilized biocatalyst. Lipase-based magnetic nanoflowers were effectively applied for the synthesis of tyrosol esters in non-aqueous media, such as organic solvents, ionic liquids, and environmental friendly deep eutectic solvents. In such media, the immobilized lipase preserved almost 100% of its initial activity after eight successive catalytic cycles, indicating that these hybrid magnetic nanoflowers can be applied for the development of efficient nanobiocatalytic systems.

Nanomaterial-Supported Enzymes for Water Purification and Monitoring in Point-of-Use Water Supply Systems

Increasing pollution of global water sources and challenges in rapid detection and treatment of the wide range of contaminants pose considerable burdens on public health. The issue is particularly critical in rural areas, where building of centralized water treatment systems and pipe infrastructure to connect dispersed populations is not always practical. Point-of-use (POU) water supply systems provide cost-effective and energy-efficient approaches to store, treat, and monitor the quality of water. Currently available POU systems have limited success in dealing with the portfolio of emerging contaminants, particularly those present at trace concentrations. A site-to-site variation in contaminant species and concentrations also requires versatile POU systems to detect and treat contaminants and provide on-demand clean water. Among different technologies for developing rapid and sensitive water purification processes and sensors, enzymes offer one of the potential solutions because of their strong activity and selectivity toward chemical substrates. Many enzyme-nanomaterial composites have recently been developed that enhance enzymes' stability and activity and expand their functionality, thus facilitating the application of nanosupported enzymes in advanced POU systems. In this Account, we highlight the strengths and limitations of nanosupported enzymes for their potential applications in POU systems for water treatment as well as detection of contaminants, even at trace levels. We first summarize the mechanisms by which silica, carbon, and metallic nanosupports improve enzyme stability, selectivity, and catalysis. The unique immobilization properties and potential advantages of novel bioderived nanosupports over non-bioderived nanomaterials are emphasized. We illustrate prospective applications of nanosupported enzymes in POU systems with different roles: water purification, disinfection, and contaminant sensing. For each type of application, nanosupported enzymes offer higher performance than free enzymes. Nanosupports prolong enzymes' lifetimes and improve the rates of contaminant removal by concentrating contaminants near the enzymes. Nanosupports also stabilize antimicrobial enzymes while facilitating their attachment to bacterial surfaces, thereby increasing their potential uses for disinfection and prevention of biofouling in water purification and storage devices. As enzyme-based electrochemical sensors rely on electrochemical reactions of enzymatically generated species, the ability of conductive nanosupports to enhance enzyme activity and stability and to promote transfer of electrons onto the electrode greatly improves the sensitivity and durability of electroenzymatic contaminant sensors. Despite the promising results in laboratory settings, the application of nanosupported enzymes in real-world POU systems requires the implementation of multiple enzyme combinations and strategies for minimizing health risks associated with unintended releases of nanomaterials. Finally, we identify multidisciplinary research gaps in the development of nanosupported enzyme treatment systems and provide frameworks for the early adopters to make informed decisions on whether and how to use such POU systems.