Reduced postoperative intra-abdominal adhesions using Carbylan-SX, a semisynthetic glycosaminoglycan hydrogel

Application of injectable hydrogels in cancer immunotherapy

Immunotherapy is a revolutionary and promising approach to cancer treatment. However, traditional cancer immunotherapy often has the disadvantages of limited immune response rate, poor targeting, and low treatment index due to systemic administration. Hydrogels are drug carriers with many advantages. They can be loaded and transported with immunotherapeutic agents, chemical anticancer drugs, radiopharmaceuticals, photothermal agents, photosensitizers, and other therapeutic agents to achieve controlled release of drugs, extend the retention time of drugs, and thus successfully trigger anti-tumor effects and maintain long-term therapeutic effects after administration. This paper reviews recent advances in injectable hydrogel-based cancer immunotherapy, including immunotherapy alone, immunotherapy with combination chemotherapy, radiotherapy, phototherapy, and DNA hydrogel-based immunotherapy. Finally, we review the potential and limitations of injectable hydrogels in cancer immunotherapy.

Efficacy of gelatin sponge in the prevention of post-surgical intra-abdominal adhesion in a rat model

Although different products have been developed to prevent post-surgical adhesion, their efficacy remains unsatisfactory. This study aimed to evaluate the efficacy of the gelatin sponge in the prevention of post-surgical intra-abdominal adhesions in a rat model. Rats were randomly divided into sham, adhesion, and gelatin groups. All rats, except the sham group, underwent cecal abrasion to establish an adhesion model. After celiotomy, a sterile gelatin sponge was applied intra-abdominal on the abraded cecum in the gelatin group. Rats were sacrificed on day 14 post-surgery and intra-abdominal adhesions were evaluated and scored. Adhesion tissues were evaluated by histological, histochemical, and immunohistochemical analysis. Intra-abdominal adhesions were recorded in all rats of the adhesion group. Intra-abdominal application of gelatin sponge significantly (P < 0.001) reduced intra-abdominal adhesions by 91% in the gelatin group relative to the adhesion group. The histological analysis revealed a marked decrease (P < 0.001) in the inflammatory score and neovascularization in the gelatin group. The histochemical analysis found that gelatin sponge administration reduced adhesion formation and thickness of adhesion tissue. Moreover, gelatin sponge significantly (P < 0.0001) increased MMP-9 expression and decreased macrophage marker expression in adhesive tissue. This study revealed that the application of gelatin sponge markedly reduced the post-surgical intra-abdominal adhesions and suggests new guidance for using gelatin sponge as an anti-adhesive substance in clinical practice.

The Therapeutic Potential of Targeting Key Signaling Pathways as a Novel Approach to Ameliorating Post-Surgical Adhesions

BACKGROUND

Peritoneal adhesions (PA) are a common complication of abdominal operations. A growing body of evidence shows that inhibition of inflammation and fibrosis at sites of peritoneal damaging could prevent the development of intra-abdominal adhesions.

METHODS

A search of PubMed, Medline, CINAHL and Embase databases was performed using the keywords 'postsurgical adhesion', 'post-operative adhesion', 'peritoneal adhesion', 'surgery-induced adhesion' and 'abdominal adhesion'. Studies detailing the use of pharmacological and non-pharmacological agents for peritoneal adhesion prevention were identified, and their bibliographies were thoroughly reviewed to identify further related articles.

RESULTS

Several signaling pathways, such as tumor necrosis factor-alpha, tissue plasminogen activator, and type 1 plasminogen activator inhibitor, macrophages, fibroblasts, and mesothelial cells play a key part in the development of plasminogen activator. Several therapeutic approaches based on anti-PA drug barriers and traditional herbal medicines have been developed to prevent and treat adhesion formation. In recent years, the most promising method to prevent PA is treatment using biomaterial-based barriers.

CONCLUSION

In this review, we provide an overview of the pathophysiology of adhesion formation and various agents targeting different pathways, including chemical agents, herbal agents, physical barriers, and clinical trials concerning this matter.

Recent advances in polysaccharide-based in situ forming hydrogels

Polysaccharides comprise an important class of natural polymers; they are abundant, diverse, polyfunctional, typically benign, and are biodegradable. Using polysaccharides to design in situ forming hydrogels is an attractive and important field of study since many polysaccharide-based hydrogels exhibit desirable characteristics including self-healing, responsiveness to environmental stimuli, and injectability. These characteristics are particularly useful for biomedical applications. This review will discuss recent discoveries in polysaccharide-based in situ forming hydrogels, including network architecture designs, curing mechanisms, physical and chemical properties, and potential applications.

Sprayable Hydrogel for Biomedical Applications

Polymeric hydrogels have extraordinary potential to be utilized for biomedical applications. Recently, sprayable hydrogels have received increasing attention for their biocompatibility, degradability, tunable mechanical properties and rapid spray-filming abilities. In...

OUP accepted manuscript

BACKGROUND

To provide the optimal milieu for implantation and fetal development, the female reproductive system must orchestrate uterine dynamics with the appropriate hormones produced by the ovaries. Mature oocytes may be fertilized in the fallopian tubes, and the resulting zygote is transported toward the uterus, where it can implant and continue developing. The cervix acts as a physical barrier to protect the fetus throughout pregnancy, and the vagina acts as a birth canal (involving uterine and cervix mechanisms) and facilitates copulation. Fertility can be compromised by pathologies that affect any of these organs or processes, and therefore, being able to accurately model them or restore their function is of paramount importance in applied and translational research. However, innate differences in human and animal model reproductive tracts, and the static nature of 2D cell/tissue culture techniques, necessitate continued research and development of dynamic and more complex in vitro platforms, ex vivo approaches and in vivo therapies to study and support reproductive biology. To meet this need, bioengineering is propelling the research on female reproduction into a new dimension through a wide range of potential applications and preclinical models, and the burgeoning number and variety of studies makes for a rapidly changing state of the field.

OBJECTIVE AND RATIONALE

This review aims to summarize the mounting evidence on bioengineering strategies, platforms and therapies currently available and under development in the context of female reproductive medicine, in order to further understand female reproductive biology and provide new options for fertility restoration. Specifically, techniques used in, or for, the uterus (endometrium and myometrium), ovary, fallopian tubes, cervix and vagina will be discussed.

SEARCH METHODS

A systematic search of full-text articles available in PubMed and Embase databases was conducted to identify relevant studies published between January 2000 and September 2021. The search terms included: bioengineering, reproduction, artificial, biomaterial, microfluidic, bioprinting, organoid, hydrogel, scaffold, uterus, endometrium, ovary, fallopian tubes, oviduct, cervix, vagina, endometriosis, adenomyosis, uterine fibroids, chlamydia, Asherman’s syndrome, intrauterine adhesions, uterine polyps, polycystic ovary syndrome and primary ovarian insufficiency. Additional studies were identified by manually searching the references of the selected articles and of complementary reviews. Eligibility criteria included original, rigorous and accessible peer-reviewed work, published in English, on female reproductive bioengineering techniques in preclinical (in vitro/in vivo/ex vivo) and/or clinical testing phases.

OUTCOMES

Out of the 10 390 records identified, 312 studies were included for systematic review. Owing to inconsistencies in the study measurements and designs, the findings were assessed qualitatively rather than by meta-analysis. Hydrogels and scaffolds were commonly applied in various bioengineering-related studies of the female reproductive tract. Emerging technologies, such as organoids and bioprinting, offered personalized diagnoses and alternative treatment options, respectively. Promising microfluidic systems combining various bioengineering approaches have also shown translational value.

WIDER IMPLICATIONS

The complexity of the molecular, endocrine and tissue-level interactions regulating female reproduction present challenges for bioengineering approaches to replace female reproductive organs. However, interdisciplinary work is providing valuable insight into the physicochemical properties necessary for reproductive biological processes to occur. Defining the landscape of reproductive bioengineering technologies currently available and under development for women can provide alternative models for toxicology/drug testing, ex vivo fertility options, clinical therapies and a basis for future organ regeneration studies.

Prevention of Post-Operative Adhesions: A Comprehensive Review of Present and Emerging Strategies

Post-operative adhesions affect patients undergoing all types of surgeries. They are associated with serious complications, including higher risk of morbidity and mortality. Given increased hospitalization, longer operative times, and longer length of hospital stay, post-surgical adhesions also pose a great financial burden. Although our knowledge of some of the underlying mechanisms driving adhesion formation has significantly improved over the past two decades, literature has yet to fully explain the pathogenesis and etiology of post-surgical adhesions. As a result, finding an ideal preventative strategy and leveraging appropriate tissue engineering strategies has proven to be difficult. Different products have been developed and enjoyed various levels of success along the translational tissue engineering research spectrum, but their clinical translation has been limited. Herein, we comprehensively review the agents and products that have been developed to mitigate post-operative adhesion formation. We also assess emerging strategies that aid in facilitating precision and personalized medicine to improve outcomes for patients and our healthcare system.

Peritoneal adhesions: Occurrence, prevention and experimental models

Peritoneal adhesions (PA) are a postoperative syndrome with high incidence rate, which can cause chronic abdominal pain, intestinal obstruction, and female infertility. Previous studies have identified that PA are caused by a disordered feedback of blood coagulation, inflammation, and fibrinolysis. Monocytes, macrophages, fibroblasts, and mesothelial cells are involved in this process, and secreted signaling molecules, such as tumor necrosis factor alpha (TNF-α), interleukin-10 (IL-10), tissue plasminogen activator (tPA), and type 1 plasminogen activator inhibitor (PAI-1), play a key role in PA development. There have been many attempts to prevent PA formation by anti-PA drugs, barriers, and other therapeutic methods, but their effectiveness has not been widely accepted. Treatment by biomaterial-based barriers is believed to be the most promising method to prevent PA formation in recent years. In this review, the pathogenesis, treatment approaches, and animal models of PA are summarized and discussed to understand the challenges faced in the biomaterial-based anti-PA treatments.

Development of novel biocompatible thermosensitive anti-adhesive agents using human-derived acellular dermal matrix

Postoperative adhesion is a natural phenomenon that occurs in damaged tissue cells. Several anti-adhesion agents are currently used, but there is no leading-edge product with excellent adhesion-preventive effects. The purpose of this study was to develop ideal anti-adhesive agents using human-derived acellular dermal matrix (ADM). We developed 5 new biocompatible thermosensitive anti-adhesion barriers (AABs) using micronized human-derived ADM, hyaluronic acid, and temperature-sensitive and biocompatible synthesized polymers. The biocompatibility, anti-adhesion effect, and biodegradability of these AABs were compared with those of commercial thermosensitive anti-adhesion agents. No cytotoxic effects were observed in vitro and in vivo. Animal testing of adhesion resistance confirmed that the adhesion area, strength, and grade of AAB03 were statistically superior to those of the control group. Factors related to adhesion formation, such as lymphocytes, macrophages, microvessels, and collagen fiber density, were observed using specific staining methods; the results confirmed that AAB03 group exhibited significantly lower macrophage counts, microvessel density, and collagen fiber density than the control groups. Furthermore, AAB03 was completely absorbed by 6 weeks. Thus, AAB03 has the potential to be used as a high-performance anti-adhesion agent.

Comparison of Different In Vivo Incubation Sites to Produce Tissue-Engineered Small Intestine

OBJECTIVE

The objective of this study was to compare the impact of different in vivo incubation sites on the production of tissue-engineered small intestine (TESI).

MATERIALS AND METHODS

Green fluorescent protein transgenic rat pups (3-5 days) were used as donors of intestinal organoids. Harvested intestine was exposed to enzymatic digestion to release intestinal stem cell-containing organoids. Organoids were purified, concentrated, and seeded onto tubular polyglycolic acid scaffolds. Seeded scaffolds were implanted in each of five locations in recipient female nude rats: wrapped with omentum, wrapped with intestinal mesentery, wrapped with uterine horn membrane, attached to the abdominal wall, and inserted into the subcutaneous space. After 4 weeks of in vivo incubation, specimens from each site were explanted for evaluation.

RESULTS

Wrapping seeded scaffolds with vascularized membranes produced TESI with variable lengths of vascularized pedicles, with the longest pedicle length from uterine horn membrane, the shortest pedicle length from intestinal mesentery, and intermediate length from omentum. The quantity of TESI, as expressed by volume and neomucosal length, was identical in TESI produced by wrapping with any of the three membranes. The smallest quantity of TESI was found in TESI produced from insertion into the subcutaneous space, with an intermediate quantity of TESI produced from attachment to the abdominal wall. Periodic acid-Schiff and immunofluorescence (IF) staining confirmed the presence of all intestinal epithelial cell lineages in TESI produced at all incubation sites. Additional IF staining demonstrated the presence of enteric nervous system components and blood vessels. Wrapping of seeded scaffolds with vascularized membranes significantly increased the density of blood vessels in the TESI produced.

CONCLUSION

Wrapping of seeded scaffolds in vascularized membranes produced the largest quantity and highest quality of TESI. Attaching seeded scaffolds to the abdominal wall produced an intermediate quantity of TESI, but the quality was still comparable to TESI produced in vascularized membranes. Insertion of seeded scaffolds into the subcutaneous space produced the smallest quantity and lowest quality of TESI. In summary, wrapping seeded scaffolds with vascularized membranes is favorable for the production of TESI, and wrapping with omentum may produce TESI that is most easily anastomosed with host intestine.

Effects of a novel hydrogel on equine bone healing: A pilot study

Objective: To examine the efficacy and biocompatibility of a thiolated gelatin-thiolated carboxymethyl hyaluronan (CMHA-SGX) sponge as an osteoconductive device in an equine second and fourth metacarpal bone defect model.

Methods: Seven millimetre segmental ostectomies were created bilaterally in the second and fourth metacarpal bones of four horses. The left and right metacarpal defects were randomly assigned to (1) be filled with a CMHA-SGX sponge (treated) or (2) were left unfilled (control). The duration of the study was nine weeks. Bone healing was evaluated using serial radiology, as well as histologically and histomorphometrically. Data were analyzed using an analysis of variance (ANOVA). The level of significance was p <0.05.

Results: Serial radiographic evaluation revealed improved healing in the treated compared to the control defects at weeks eight and nine (p = 0.02). This finding was not corroborated histologically. Histomorphometry did not reveal any significant differences in healing between experimental groups. The CMHA-SGX sponge did not inhibit bone formation, induce local inflammation or lead to surgical site infection.

Clinical significance: While further optimization to improve osteoconductive properties should be considered, the CMHA-SGX sponge appears to be a biocompatible orthopaedic implant and its use as a carrier for osteogenic proteins warrants further investigation.

Prevention of intra-abdominal adhesion by bi-layer electrospun membrane

The aim of this study was to compare the anti-adhesion efficacy of a bi-layer electrospun fibrous membrane consisting of hyaluronic acid-loaded poly(ε-caprolactone) (PCL) fibrous membrane as the inner layer and PCL fibrous membrane as the outer layer with a single-layer PCL electrospun fibrous membrane in a rat cecum abrasion model. The rat model utilized a cecal abrasion and abdominal wall insult surgical protocol. The bi-layer and PCL membranes were applied between the cecum and the abdominal wall, respectively. Control animals did not receive any treatment. After postoperative day 14, a visual semiquantitative grading scale was used to grade the extent of adhesion. Histological analysis was performed to reveal the features of adhesion tissues. Bi-layer membrane treated animals showed significantly lower adhesion scores than control animals (p < 0.05) and a lower adhesion score compared with the PCL membrane. Histological analysis of the bi-layer membrane treated rat rarely demonstrated tissue adhesion while that of the PCL membrane treated rat and control rat showed loose and dense adhesion tissues, respectively. Bi-layer membrane can efficiently prevent adhesion formation in abdominal cavity and showed a significantly decreased adhesion tissue formation compared with the control.

Hyaluronic acid/mildly crosslinked alginate hydrogel as an injectable tissue adhesion barrier

Although hyaluronic acid (HA) has been conventionally utilized as a tissue adhesion barrier material, its rapid clearance in the body still remains as a big challenge in the clinical practice. In this study, we prepared a hydrogel of HA embedded in mildly crosslinked alginate (HA/mcALG hydrogel), which is injectable, easily covers injured tissues, and remains stably at the applied site during wound healing (by muco-adhesive HA embedded in the network structure of the mcALG hydrogel). The HA/mcALG hydrogel was highly effective for the prevention of peritoneal tissue adhesion compared to HA and mcALG hydrogels, and did not lead to any abnormal tissue responses during wound healing. The HA/mcALG hydrogel can be a good candidate as an injectable tissue adhesion barrier for clinical applications.

Evaluation of hydrogels for bio-printing applications

In the United States alone, there are approximately 500,000 burn injuries that require medical treatment every year. Limitations of current treatments necessitate the development of new methods that can be applied quicker, result in faster wound regeneration, and yield skin that is cosmetically similar to undamaged skin. The development of new hydrogel biomaterials and bioprinting deposition technologies has provided a platform to address this need. Herein we evaluated characteristics of twelve hydrogels to determine their suitability for bioprinting applications. We chose hydrogels that are either commercially available, or are commonly used for research purposes. We evaluated specific hydrogel properties relevant to bioprinting applications, specifically; gelation time, swelling or contraction, stability, biocompatibility and printability. Further, we described regulatory, commercial and financial aspects of each of the hydrogels. While many of the hydrogels screened may exhibit characteristics suitable for other applications, UV-crosslinked Extracel, a hyaluronic acid-based hydrogel, had many of the desired properties for our bioprinting application. Taken together with commercial availability, shelf life, potential for regulatory approval and ease of use, these materials hold the potential to be further developed into fast and effective wound healing treatments.

In vivo evaluation of in situ polysaccharide based hydrogel for prevention of postoperative adhesion

In this paper, the carboxymethyl chitosan/oxidized dextran hydrogel was developed and its potency application in the prevention of postoperative adhesion was investigated. The developed hydrogel showed porous and interconnected interior structure with pore size about 250 μm, which was sensitive to lysozymic solution (1.5 μg/ml) with almost complete degradation after 4 weeks of in vitro incubation. In vivo study suggested that the developed hydrogel showed the great capacity on the prevention of postoperative adhesions in rat model. According to the result of histopathological examination, it clearly showed that the mesothelial cell layer of abdominal wall and cecum were completely recovered after 7 days of surgery in 3% carboxymethyl chitosan/oxidized dextran hydrogel group, while obvious adhesion between abdominal wall and cecum was observed as treatment with saline solution or 3% carboxymethyl chitosan solution after 1 day of surgery. All these results suggested that the developed biodegradable hydrogel might have potential application in the prevention of postoperative adhesion.

Thiolated carboxymethyl-hyaluronic-Acid-based biomaterials enhance wound healing in rats, dogs, and horses

The progression of wound healing is a complicated but well-known process involving many factors, yet there are few products on the market that enhance and accelerate wound healing. This is particularly problematic in veterinary medicine where multiple species must be treated and large animals heal slower, oftentimes with complicating factors such as the development of exuberant granulation tissue. In this study a crosslinked-hyaluronic-acid (HA-) based biomaterial was used to treat wounds on multiple species: rats, dogs, and horses. The base molecule, thiolated carboxymethyl HA, was first found to increase keratinocyte proliferation in vitro. Crosslinked gels and films were then both found to enhance the rate of wound healing in rats and resulted in thicker epidermis than untreated controls. Crosslinked films were used to treat wounds on forelimbs of dogs and horses. Although wounds healed slower compared to rats, the films again enhanced wound healing compared to untreated controls, both in terms of wound closure and quality of tissue. This study indicates that these crosslinked HA-based biomaterials enhance wound healing across multiple species and therefore may prove particularly useful in veterinary medicine. Reduced wound closure times and better quality of healed tissue would decrease risk of infection and pain associated with open wounds.

Application of polycaprolactone as an anti-adhesion biomaterial film

Adhesions are unavoidable consequences of surgery and other trauma. How to prevent the adhesions remains a big issue in healthcare system. The objective of this study is to test the efficacy of polycaprolactone (PCL) films as physical barriers in reducing postoperative intra-abdominal adhesions in the rat cecum-abdominal wall model. PCL is quite cheap compared with the agents recently used in the market. The fabrication method is also very easy to perform. Scanning electron microscope (SEM) showed multiple pores over upper and bottom surfaces but too small to permit cells to migrate from one surface onto another surface. Those pores were proven to be not interconnected. The PCL film did not show any evidence of cytotoxic effects as it did not induce any significant increase in cytoplasmic lactate dehydrogenase release from the NIH3T3 cells that it came in contact with. In animal studies, the PCL films led to fewer adhesions than Seprafilm in rat adhesion model. PCL films were efficacious in reducing postoperative intra-abdominal adhesion formation in rat cecum-abdominal wall models.

The generation of 3-D tissue models based on hyaluronan hydrogel-coated microcarriers within a rotating wall vessel bioreactor

With the increasing necessity for functional tissue- and organ equivalents in the clinic, the optimization of techniques for the in vitro generation of organotypic structures that closely resemble the native tissue is of paramount importance. The engineering of a variety of highly differentiated tissues has been achieved using the rotating wall vessel (RWV) bioreactor technology, which is an optimized suspension culture allowing cells to grow in three-dimensions (3-D). However, certain cell types require the use of scaffolds, such as collagen-coated microcarrier beads, for optimal growth and differentiation in the RWV. Removal of the 3-D structures from the microcarriers involves enzymatic treatment, which disrupts the delicate 3-D architecture and makes it inapplicable for potential implantation. Therefore, we designed a microcarrier bead coated with a synthetic extracellular matrix (ECM) composed of a disulfide-crosslinked hyaluronan and gelatin hydrogel for 3-D tissue engineering, that allows for enzyme-free cell detachment under mild reductive conditions (i.e. by a thiol-disulfide exchange reaction). The ECM-coated beads (ECB) served as scaffold to culture human intestinal epithelial cells (Int-407) in the RWV, which formed viable multi-layered cell aggregates and expressed epithelial differentiation markers. The cell aggregates remained viable following dissociation from the microcarriers, and could be returned to the RWV bioreactor for further culturing into bead-free tissue assemblies. The developed ECBs thus offer the potential to generate scaffold-free 3-D tissue assemblies, which could further be explored for tissue replacement and remodeling.

Prevention of intra-peritoneal adhesions in gynaecological surgery: theory and evidence

Post-operative adhesions are a significant complication of all abdominal surgical procedures. The major strategies for adhesion prevention in gynaecological surgery are focused on the optimization of surgical technique and use of anti-adhesive agents, which fall into two main categories: pharmacological agents and barriers. Surgical technique that minimizes peritoneal trauma can reduce, but cannot prevent post-operative adhesion formation. Various local and systemic drugs that can alter the local inflammatory response, inhibit the coagulation cascade and promote fibrinolysis have been evaluated. Limited data support the administration of post-operative corticosteroids in addition to systemic intra-operative corticosteroids for the prevention of adhesions after gynaecological surgery. None of the remaining pharmacological agents have been found effective for the reduction of post-operative adhesions. Barriers are currently considered the most useful adjuncts, which may reduce adhesion formation. They act by separating the traumatized peritoneal surfaces during the healing period. The separation can be achieved by solid barriers or fluids. There is limited evidence from randomized clinical trials that support the beneficial effect of most of these barrier agents in the prevention of intra-peritoneal adhesions after gynaecological surgery. However, the evidence is not adequate for definite conclusions to be drawn and further research in this field is warranted.

Rheological properties of cross-linked hyaluronan-gelatin hydrogels for tissue engineering

Hydrogels that mimic the natural extracellular matrix (ECM) are used in three-dimensional cell culture, cell therapy, and tissue engineering. A semi-synthetic ECM based on cross-linked hyaluronana offers experimental control of both composition and gel stiffness. The mechanical properties of the ECM in part determine the ultimate cell phenotype. We now describe a rheological study of synthetic ECM hydrogels with storage shear moduli that span three orders of magnitude, from 11 to 3 500 Pa, a range important for engineering of soft tissues. The concentration of the chemically modified HA and the cross-linking density were the main determinants of gel stiffness. Increase in the ratio of thiol-modified gelatin reduced gel stiffness by diluting the effective concentration of the HA component.

Rapid biofabrication of tubular tissue constructs by centrifugal casting in a decellularized natural scaffold with laser-machined micropores

Centrifugal casting allows rapid biofabrication of tubular tissue constructs by suspending living cells in an in situ cross-linkable hydrogel. We hypothesize that introduction of laser-machined micropores into a decellularized natural scaffold will facilitate cell seeding by centrifugal casting and increase hydrogel retention, without compromising the biomechanical properties of the scaffold. Micropores with diameters of 50, 100, and 200 mum were machined at different linear densities in decellularized small intestine submucosa (SIS) planar sheets and tubular SIS scaffolds using an argon laser. The ultimate stress and ultimate strain values for SIS sheets with laser-machined micropores with diameter 50 mum and distance between holes as low as 714 mum were not significantly different from unmachined control SIS specimens. Centrifugal casting of GFP-labeled cells suspended in an in situ cross-linkable hyaluronan-based hydrogel resulted in scaffold recellularization with a high density of viable cells inside the laser-machined micropores. Perfusion tests demonstrated the retention of the cells encapsulated within the HA hydrogel in the microholes. Thus, an SIS scaffold with appropriately sized microholes can be loaded with hydrogel encapsulated cells by centrifugal casting to give a mechanically robust construct that retains the cell-seeded hydrogel, permitting rapid biofabrication of tubular tissue construct in a "bioreactor-free" fashion.

Use of hyaluronan-derived hydrogels for three-dimensional cell culture and tumor xenografts

The practice of in vitro three-dimensional (3-D) cell culture has lagged behind the realization that classical two-dimensional (2-D) culture on plastic surfaces fails to mirror normal cell biology. Biologically, a complex network of proteins and proteoglycans that constitute the extracellular matrix (ECM) surrounds every cell. To recapitulate the normal cellular behavior, scaffolds (ECM analogs) that reconstitute the essential biological cues are required. This unit describes the 3-D cell culture and tumor engineering applications of Extracel, a novel semisynthetic ECM (sECM), based on cross-linked derivatives of hyaluronan and gelatin. A simplified cell encapsulation and pseudo-3-D culturing (on top of hydrogels) protocol is provided. In addition, the use of this sECM as a vehicle to obtain tumor xenografts with improved take rates and tumor growth is presented. These engineered tumors can be used to evaluate anticancer therapies under physiologically relevant conditions.

Modular extracellular matrices: solutions for the puzzle

The common technique of growing cells in two-dimensions (2-D) is gradually being replaced by culturing cells on matrices with more appropriate composition and stiffness, or by encapsulation of cells in three-dimensions (3-D). The universal acceptance of the new 3-D paradigm has been constrained by the absence of a commercially available, biocompatible material that offers ease of use, experimental flexibility, and a seamless transition from in vitro to in vivo applications. The challenge-the puzzle that needs a solution-is to replicate the complexity of the native extracellular matrix (ECM) environment with the minimum number of components necessary to allow cells to rebuild and replicate a given tissue. For use in drug discovery, toxicology, cell banking, and ultimately in reparative medicine, the ideal matrix would therefore need to be highly reproducible, manufacturable, approvable, and affordable. Herein we describe the development of a set of modular components that can be assembled into biomimetic materials that meet these requirements. These semi-synthetic ECMs, or sECMs, are based on hyaluronan derivatives that form covalently crosslinked, biodegradable hydrogels suitable for 3-D culture of primary and stem cells in vitro, and for tissue formation in vivo. The sECMs can be engineered to provide appropriate biological cues needed to recapitulate the complexity of a given ECM environment. Specific applications for different sECM compositions include stem cell expansion with control of differentiation, scar-free wound healing, growth factor delivery, cell delivery for osteochondral defect and liver repair, and development of vascularized tumor xenografts for personalized chemotherapy.

Prevention of peritendinous adhesions using a hyaluronan-derived hydrogel film following partial-thickness flexor tendon injury

Peritendinous adhesions are an important complication of flexor tendon injury. Three hyaluronan (HA)-derived biomaterials were evaluated for the reduction of peritendinous adhesions following partial-thickness tendon injury in rabbits. Rabbits (n = 24) were divided into three groups (n = 8 per group), which were used for gross evaluation, histologic assessment, or biomechanical testing. The fourth and third toes from both hindpaws of each rabbit were randomly assigned to one of four treatments: (i) untreated control, (ii) Seprafilm, (iii) Carbylan-SX in situ crosslinked hydrogel, and (iv) preformed Carbylan-SX film. Rabbits were sacrificed at 3 weeks postsurgery and evaluated anatomically, histologically, and mechanically. All materials used reduced adhesions relative to untreated controls for all three evaluations. Both the gross anatomic and histologic results revealed that Carbylan-SX film was statistically superior to Seprafilm and Carbylan-SX gel in preventing tendon adhesion formation. In biomechanical tests, the Carbylan-SX film-treated hindpaws required the least force to pull the tendon from the sheath. This force was statistically indistinguishable from that required to extrude an unoperated tendon (n = 8). Carbylan-SX gel was less effective than Carbylan-SX film but superior to Seprafilm for all evaluations. A crosslinked HA-derived film promoted healing of a flexor tendon injury without the formation of fibrosis at 3 weeks postoperatively.

Bioreactor-free tissue engineering: directed tissue assembly by centrifugal casting

Casting is a process by which a material is introduced into a mold while it is liquid, allowed to solidify in a predefined shape inside the mold, and then removed to give a fabricated object, part or casing. Centrifugal casting could be defined as a process of molding using centrifugal forces. Although the centrifugal casting technology has a long history in metal manufacturing and in the plastics industry, only recently has this technology attracted the attention of tissue engineers. Initially, centrifugation was used to optimize cell seeding on a solid scaffold. More recently, centrifugal casting has been used to create tubular scaffolds and both tubular and flat multilayered, living tissue constructs. These newer applications were enabled by a new class of biocompatible in situ crosslinkable hydrogels that mimic the extracellular matrix. Herein the authors summarize the state of the art of centrifugal casting technology in tissue engineering, they outline associated technological challenges, and they discuss the potential future for clinical applications.

Engineering a clinically-useful matrix for cell therapy

The design criteria for matrices for encapsulation of cells for cell therapy include chemical, biological, engineering, marketing, regulatory, and financial constraints. What is required is a biocompatible material for culture of cells in three-dimensions (3-D) that offers ease of use, experimental flexibility to alter composition and compliance, and a composition that would permit a seamless transition from in vitro to in vivo use. The challenge is to replicate the complexity of the native extracellular matrix (ECM) environment with the minimum number of components necessary to allow cells to rebuild a given tissue. Our approach is to deconstruct the ECM to a few modular components that can be reassembled into biomimetic materials that meet these criteria. These semi-synthetic ECMs (sECMs) employ thiol-modified derivatives of hyaluronic acid (HA) that can form covalently crosslinked, biodegradable hydrogels. These sECMs are "living" biopolymers, meaning that they can be crosslinked in the presence of cells or tissues to enable cell therapy and tissue engineering. Moreover, the sECMs allow inclusion of the appropriate biological cues needed to simulate the complexity of the ECM of a given tissue. Taken together, the sECM technology offers a manufacturable, highly reproducible, flexible, FDA-approvable, and affordable vehicle for cell expansion and differentiation in 3-D.

Evaluating drug efficacy and toxicology in three dimensions: using synthetic extracellular matrices in drug discovery

The acceptance of the new paradigm of 3-D cell culture is currently constrained by the lack of a biocompatible material in the marketplace that offers ease of use, experimental flexibility, and a seamless transition from in vitro to in vivo applications. I describe the development of a covalently cross-linked mimic of the extracellular matrix (sECM), now commercially available, for 3-D culture of cells in vitro and for translational use in vivo. These bio-inspired, biomimetic materials can be used "as is" in drug discovery, toxicology, cell banking, and, ultimately, medicine. For cell therapy and the development of clinical combination products, the sECM biomaterials must be highly reproducible, manufacturable, approvable, and affordable. To obtain integrated, functional, multicellular systems that recapitulate tissues and organs, the needs of the true end users, physicians and patients, must dictate the key design criteria. In chemical terms, the sECM consists of chemically-modified hyaluronan (HA), other glycosaminoglycans (GAGs), and ECM polypeptides containing thiol residues that are cross-linked using biocompatible polyvalent electrophiles. For example, co-cross-linking the semisynthetic thiol-modified HA-like GAG with thiol-modified gelatin produces Extracel as a hydrogel. This hydrogel may be formed in situ in the presence of cells or tissues to provide an injectable cell-delivery vehicle. Alternately, an Extracel hyrogel can be lyophilized to create a macroporous scaffold, which can then be employed for 3-D cell culture. In this Account, we describe four applications of sECMs that are relevant to the evaluation of drug efficacy and drug toxicity. First, the uses of sECMs to promote both in vitro and in vivo growth of healthy cellularized 3-D tissues are summarized. Primary or cell-line-derived cells, including fibroblasts, chondrocytes, hepatocytes, adult and embryonic stem cells, and endothelial and epithelial cells have been used. Second, primary hepatocytes retain their biochemical phenotypes and achieve greater longevity in 3-D culture in Extracel. This constitutes a new 3-D method for rapid evaluation of hepatotoxicity in vitro. Third, cancer cell lines are readily grown in 3-D culture in Extracel, offering a method for rapid evaluation of new anticancer agents in a more physiological ex vivo tumor model. This system has been used to evaluate signal transduction modifiers obtained from our research on lipid signaling. Fourth, a new "tumor engineering" xenograft model uses orthotopic injection of Extracel-containing tumor cells in nude mice. This approach allows production of patient-specific mice using primary human tumor samples and offers a superior metastatic cancer model. Future applications of the injectable cell delivery and 3-D cell culture methods include chemoattractant and angiogenesis assays, high-content automated screening of chemical libraries, pharmacogenomic and toxicogenomic studies with cultured organoids, and personalized treatment models. In summary, the sECM technology offers a versatile "translational bridge" from in vitro to in vivo to facilitate drug discovery in both academic and pharmaceutical laboratories.

Effects of extracellular matrix analogues on primary human fibroblast behavior

In vitro cell culture is a vital research tool for cell biology, pharmacology, toxicology, protein production, systems biology and drug discovery. Traditional culturing methods on plastic surfaces do not accurately represent the in vivo environment, and a paradigm shift from two-dimensional to three-dimensional (3-D) experimental techniques is underway. To enable this change, a variety of natural, synthetic and semi-synthetic extracellular matrix (ECM) equivalents have been developed to provide an appropriate cellular microenvironment. We describe herein an investigation of the properties of four commercially available ECM equivalents on the growth and proliferation of primary human tracheal scar fibroblast behavior, both in 3-D and pseudo-3-D conditions. We also compare subcutaneous tissue growth of 3-D encapsulated fibroblasts in vivo in two of these materials, Matrigel and Extracel. The latter shows increased cell proliferation and remodeling of the ECM equivalent. The results provide researchers with a rational basis for selection of a given ECM equivalent based on its biological performance in vitro and in vivo, as well as the practicality of the experimental protocols. Biomaterials that use a customizable glycosaminoglycan-based hydrogel appear to offer the most convenient and flexible system for conducting in vitro research that accurately translates to in vivo physiology needed for tissue engineering.

Postoperative Pericardial Adhesion Prevention Using Carbylan-SX in a Rabbit Model

INTRODUCTION

The presence of dense adhesions within the pericardial space complicates reoperative cardiac surgery. Prior attempts to reduce adhesion formation after primary cardiac surgery using medications or biomaterials have had variable success. Carbylan-SX (Carbylan Biosurgery Inc., Palo Alto, CA) is a hyaluronan-based biomaterial, which has been shown to be effective at reducing adhesions in a nonthoracic rat model. This study evaluates whether Carbylan-SX can effectively reduce postoperative adhesions within the pericardial cavity.

METHODS

Thirty-eight New Zealand white rabbits underwent a left lateral thoracotomy. A pericardiotomy was made and epicardial adhesions were induced on the anterior surface of the heart using a Dremel device (Racine, WI). The rabbits were divided into four groups: controls with abrasions only receiving no treatment (n=10), Carbylan-SX films (n=10), Carbylan-SX aerosolized hydrogel (n=10), and Seprafilm (n=8). The pericardial sac and chest were subsequently closed. Rabbits were sacrificed at a mean of 15 days. For histological analysis, each heart was divided into 12 separate 1 mm sections. Computer imaging software was used to measure the adhesion thickness and the mean of 12 random measurements for each animal was recorded and statistical analysis performed.

RESULTS

Histological analysis revealed all treatment groups to be significantly better than the control (2159 mum thickness, P<0.0001) at preventing adhesions. The Carbylan-SX film and Carbylan-SX aerosolized hydrogel both proved to be better at preventing adhesions than Seprafilm (Genzyme Corp., Cambridge, MA) with an average adhesion thickness of 454 and 577 microm, respectively, compared with 1319 microm for Seprafilm (P<0.0001 and P<0.0005, respectively). The Carbylan-SX film and Carbylan-SX aerosolized hydrogel were equally effective at preventing adhesion formation.

CONCLUSION

Carbylan-SX film and Carbylan-SX aerosolized crosslinkable hydrogel are equally effective methods of reducing postoperative pericardial adhesions within the pericardial cavity. Both the Carbylan-SX film and aerosolized hydrogel showed a significantly greater reduction in adhesions than Seprafilm. Clinical application of Carbylan-SX could have significant therapeutic implications in the future.