A novel fluorescence polarization assay for determination of penicillin G in milk

Surface-enhanced Raman spectroscopy substrates for monitoring antibiotics in dairy products: Mechanisms, advances, and prospects

Antibiotic residues in dairy products have become an undeniable threat to human health. Surface-enhanced Raman spectroscopy (SERS) has been widely used in efficiently detecting antibiotics because of its characteristics including fast response, high resolution, and strong resistance to moisture interference. However, as a core part of SERS technology, the design principle and detection performance of enhanced substrates used in monitoring antibiotics in dairy products have not yet received enough attention. Thus, it is necessary to give a critical review of the recent developments of SERS substrates for monitoring antibiotics in dairy products, which can be expected to provide inspiration for the efficient utilization of SERS technology. In this work, advances in various SERS substrates applied in sensing antibiotics in dairy products were comprehensively reviewed. First, the enhancement mechanisms were introduced in detail. Significantly, the types of enhanced materials (plasmonic metal particles [PMPs], PMPs/semiconductor composite materials) and biometric design strategies including immunoassay, aptamer, and molecularly imprinted polymers-based SERS biosensors applied in dairy products were systematically summarized for the first time. Meanwhile, the performance of SERS substrates used for the detection of antibiotics in dairy products was addressed from the aspects of dynamic linear range and detection restriction strategy. Finally, the conclusions, challenges, and future prospects of SERS substrates for antibiotic monitoring in dairy products were deeply discussed, which also provide new opinions and key points for constructing SERS substrates applied in complex food matrix in the future.

A penicillinase-modified poly(N-isopropylacrylamide-co-acrylamide) smart hydrogel biosensor with superior recyclability for sensitive and colorimetric detection of penicillin G

Antibiotics are widely used for treating bacterial infections. However, excessive or improper use of antibiotics can pose a serious threat to human health and water environments, and thus, developing cost-effective, portable and effective strategies to analyze and detect antibiotics is highly desired. Herein, we reported a responsive photonic hydrogel (RPH)-based optical biosensor (PPNAH) with superior recyclability for sensitive and colorimetric determination of a typical β-lactam antibiotic penicillin G (PG) in water. This sensor was composed of poly(N-isopropylacrylamide-co-acrylamide) smart hydrogel with incorporated penicillinase and Fe3O4@SiO2 colloidal photonic crystals (CPCs). The sensor could translate PG concentration signals into changes in the diffraction wavelength and structural color of the hydrogel. It possessed high sensitivity and selectivity to PG and excellent detection performances for other two typical β-lactam antibiotics. Most importantly, due to the unique thermosensitivity of the poly(N-isopropylacrylamide) moieties in the hydrogel, the PG-responded PPNAH sensor could be facilely regenerated via a simple physical method at least fifty times while without compromising its response performance. Besides, our sensor was suitable for monitoring the PG-contaminated environmental water and displayed satisfactory detection performances. Such a sensor possessed obvious advantages of superior recyclability, highly chemical stability, low production cost, easy fabrication, wide range of visual detection, simple and intuitive operation for PG detection, and environmental-friendliness, which holds great potential in sensitive and colorimetric detection of the PG residues in polluted water.

Selective adsorption and identification of penicillin G sodium in milk by molecularly imprinted polymer doped carbon dot

A carbon dot (CD) was prepared by o-phenylenediamine and water, which showed bright yellow fluorescence under ultraviolet light irradiation (λ = 580 nm), and verified good fluorescence quenching effect on penicillin G sodium (Png-Na). Using methacrylic acid as a functional monomer, ethylene glycol dimethacrylate as a crosslinker, and Png-Na as a template, a kind of composite microsphere combining CD and molecularly imprinted polymer (MIP) was synthesized by surface-initiated atomic transfer radical polymerization (SI-ATRP). For reasons of comparison, we also prepared MIP without CD and non-imprinted polymers (NIPs). Through static and dynamic adsorption experiments, the maximum adsorption capacity was 47.05 mg g-1 and the equilibrium time was 30 min. High-performance liquid chromatography (HPLC) was utilized to determine the content of Png-Na in the spiked milk samples. A sensitive, rapid, and simple method for determination of Png-Na in food samples was developed. The utilized approach enabled the quantification of Png-Na within the concentration range 20-1000 μg L-1 (with a limit of detection of 5 μg L-1). The recoveries achieved were in the range 93.3-98.2%, with a relative standard deviation of 1.2-4.2%. The results demonstrated that CD@MIP possessed the capability of specific adsorption and fluorescence detection of Png-Na, enabling simultaneous detection and enrichment of Png-Na in real samples.

An Impedance-Based Immunosensor for the Detection of Ovalbumin in White Wine

Food allergies are an exceptional response of the immune system caused by the ingestion of specific foods. The main foods responsible for allergic reactions are milk, eggs, seafood, soy, peanuts, tree nuts, wheat, and their derived products. Chicken egg ovalbumin (OVA), a common allergen molecule, is often used for the clarification process of wine. Traces of OVA remain in the wine during the fining process, and they can cause significant allergic reactions in sensitive consumers. Consequently, the European Food Safety Authority (EFSA) and the American Food and Drug Administration (FDA) have shown the risks for allergic people to assume allergenic foods and food ingredients, including eggs. Commonly, OVA detection requires sophisticated and time-consuming analytical techniques. Intending to develop a faster assay, we designed a proof-of-concept non-Faradaic impedimetric immunosensor for monitoring the presence of OVA in wine. Polyclonal antibodies anti-OVA were covalently immobilised onto an 11-mercaptoundecanoic-acid (11-MUA)-modified gold surface. The developed immunosensor was able to detect OVA in diluted white wine without the need for an external probe or any pre-treatment step with a sensitivity of 0.20 µg/mL, complying with the limit established by the resolution OIV/COMEX 502-2012 for the quantification of allergens in wine.

Magnetic iron oxide cores with attached gold nanostructures coated with a layer of silica: An easily, homogeneously deposited new nanomaterial for surface-enhanced Raman scattering measurements

Nanostructures made of magnetic cores (Fe₃O₄) with many smaller plasmonic (Au) nanostructures attached were covered with a very thin layer of silica. The first example of the application of this type of material for surface-enhanced Raman scattering (SERS) measurements is presented. (Fe₃O₄@Au)@SiO₂ nanoparticles turned out to be very efficient substrates for SERS measurements. Moreover, due to the nanomaterial's strong magnetic properties, it can be easily manipulated using a magnetic field, and it is therefore possible to form homogeneous layers (with no significant 'coffee-ring' effect) of (Fe₃O₄@Au)@SiO₂ nanoparticles using a very simple procedure: depositing a drop of a sol of such nanoparticles and evaporating the solvent after placing the sample in a strong magnetic field. Synthesised (Fe₃O₄@Au)@SiO₂ nanostructures have been used for the SERS detection of penicillin G in milk. Good quality SERS spectra of penicillin G were obtained even at a concentration of penicillin G in milk of 1 nmol/l - this means that the SERS detection of penicillin G in milk is possible at a concentration lower than the maximum residue limit of penicillin G in milk established by the European Commission. .

Selective Detection of Penicillin G Antibiotic in Milk by Molecularly Imprinted Polymer-Based Plasmonic SPR Sensor

Molecularly imprinted polymer-based surface plasmon resonance sensor prepared using silver nanoparticles was designed for the selective recognition of Penicillin G (PEN-G) antibiotic from both aqueous solution and milk sample. PEN-G imprinted sensors (NpMIPs) SPR sensor was fabricated using poly (2-hydroxyethyl methacrylate-N-methacroyl-(L)-cysteine methyl ester)-silver nanoparticles-N-methacryloyl-L-phenylalanine methyl ester polymer by embedding silver nanoparticles (AgNPs) into the polymeric film structure. In addition, a non-imprinted (NpNIPs) SPR sensor was prepared by utilizing the same polymerization recipe without addition of the PEN-G template molecule to evaluate the imprinting effect. FTIR-ATR spectrophotometer, ellipsometer, contact angle measurements were used for the characterization of NpMIPs SPR sensors. The linear concentration range of 0.01–10 ng/mL PEN-G was studied for kinetic analyses. The augmenting effect of AgNPs used to increase the surface plasmon resonance signal response was examined using polymer-based PEN-G imprinted (MIPs) sensor without the addition of AgNPs. The antibiotic amount present in milk chosen as a real sample was measured by spiking PEN-G into the milk. According to the Scatchard, Langmuir, Freundlich and Langmuir–Freundlich adsorption models, the interaction mechanism was estimated to be compatible with the Langmuir model.

Reversible Structural Transformation of CuI-TbIII Heterometallic MOFs with Highly Efficient Detection Capability toward Penicillin

A Cu^I-Tb^III heterometallic MOF, namely 1·DMF, was obtained via a coordination assembly process of isonicotinic acid with Cu^I and Tb^III. 1·DMF can be switched to 1·MeOH in methanol with a luminescent emission response. Meanwhile, 1·MeOH exhibits a reversible single-crystal transformation to 1·DMF after immersion in DMF. Both MOFs have superior physicochemical stability. The 1·DMF-based biosensor has a remarkable sensing performance toward penicillin.

Emergent Biosensing Technologies Based on Fluorescence Spectroscopy and Surface Plasmon Resonance

The purpose of this work is to provide an exhaustive overview of the emerging biosensor technologies for the detection of analytes of interest for food, environment, security, and health. Over the years, biosensors have acquired increasing importance in a wide range of applications due to synergistic studies of various scientific disciplines, determining their great commercial potential and revealing how nanotechnology and biotechnology can be strictly connected. In the present scenario, biosensors have increased their detection limit and sensitivity unthinkable until a few years ago. The most widely used biosensors are optical-based devices such as surface plasmon resonance (SPR)-based biosensors and fluorescence-based biosensors. Here, we will review them by highlighting how the progress in their design and development could impact our daily life.

A two-dimensional photonic crystal hydrogel biosensor for colorimetric detection of penicillin G and penicillinase inhibitors

A simple penicillinase functionalized two-dimensional photonic crystal hydrogel (2DPPCH) biosensor was developed for colorimetric detection of penicillin G and penicillinase inhibitors. The penicillinase can specifically recognize penicillin G and catalyze it to produce penicilloic acid, which decreases the pH of the hydrogel microenvironment and shrinks the pH-sensitive hydrogel. The particle spacing decrease of the 2D photonic crystal array induced by the hydrogel shrinkage further causes a blue-shift in the diffraction wavelength. While the hydrolysis reaction is repressed upon treatment with clavulanate potassium (a kind of penicillinase inhibitor), no significant change in the diffraction wavelength is found. The detection of targets can be achieved by measuring the Debye diffraction ring diameter or observing the structural color change in the visible region. The lowest detectable concentrations for penicillin G and clavulanate potassium are 1 μM and 0.1 μM, respectively. Moreover, the 2DPPCH is proved to exhibit high selectivity and an excellent regeneration property, and it shows satisfactory performance for penicillin G analysis in real water samples.

Magnetic mesoporous carbon material based electrochemical sensor for rapid detection of penicillin sodium in milk

In recent years, to increase growth rate and prevent infectious diseases, an excessive use of antibiotics in livestock breeding processes has resulted in the presence of antibiotic residues in animal foods. In this experiment, a new kind of electrochemical sensor is prepared based on magnetic mesoporous hollow carbon microspheres (MHM) as a penicillinase (Pen X) adsorption carrier to rapidly detect penicillin sodium (Pen G), named Pen X/MHM/MGCE. The MHM-adsorbed penicillinase can be separated from the solution by magnetic attraction and fixed on a magnetic glassy carbon electrode by physical adsorption, which is easy to operate and avoids the interference of a crosslinking agent at the active site of the enzyme. A differential pulse voltammetry (DPV) method is used to immerse the working electrode in test samples containing different concentrations of penicillin sodium solution with 0.5 mg/mL oxidized hematoxylin. According to the quantitative relationship between the current value and the concentration of penicillin sodium, the concentration of penicillin sodium in the tested samples can be determined. The detection range of the sensor is 10^-8 to 10^-2 mg/mL, the linear relationship is good (R² = 0.9983), and the detection limit (LOD) is 2.655 × 10^-7 mg/mL (S/N = 3). The detection of penicillin sodium in milk using a standard addition method shows good recovery. Furthermore, the proposed method has the advantages of a wide detection range, good enzyme immobilization capacity, good precision and stability, convenient cleaning, and recycling of solid materials. Thus, it can successfully achieve rapid detection in milk samples. PRACTICAL APPLICATION: The sensor provides a low detection limit and high recovery rate of electrode material; therefore, the sensor can realize the rapid and quantitative detection of penicillin sodium in milk.

Functional nucleic acid-based fluorescence polarization/anisotropy biosensors for detection of biomarkers

The sensitive and selective detection of biomarkers plays a crucial role in disease diagnostics, drug discovery, and early screening of cancers. The achievement of this goal highly depends on the continuous development of biosensing technologies. Among them, fluorescence anisotropy/polarization (FA/FP) analysis receives increasing interest due to the advantage of simple operation, fast response, and no background interference. In recent decades, great progress has been achieved in FA/FP sensors thanks to the development of functional nucleic acids (FNAs) including aptamers and nucleic acid enzymes. This review focuses on FNA-based FA/FP sensors for the quantitative detection of biomarkers, such as nucleic acid, small molecules, and proteins. The design strategies, recognition elements, and practical applications are fully highlighted. The article also discusses the challenges of applying FNA-based FA/FP sensors in the next generation and the potential solutions along with future prospects. Graphical abstract.

Fluorescence polarization assay to detect the presence of traces of ciprofloxacin

Detection of ciprofloxacin residues in milk by sensitive and rapid methods is of great interest due to its use in the treatment of dairy livestock health. Current analytical approaches to antibiotics detection, are laboratory-based methods and they are time-consuming and require trained personnel. To cope this problem, we propose an assay, based on fluorescence polarization principle, able to detect the presence of ciprofloxacin in diluted milk sample without any pre-treatment. The proposed method is based on the use of ciprofloxacin-protein conjugate labeled with near infrared fluorescence dye, which upon binding to specific antibody causes an increase of the fluorescence polarization emission signal. The developed assay allows for the detection of ciprofloxacin at a concentration of 1ppb, which represents an amount lower than the maximum residual limit (MRL) of ciprofloxacin in milk, as set by the European Union regulation (100 ppb).

Investigation of the Small Size of Nanobodies for a Sensitive Fluorescence Polarization Immunoassay for Small Molecules: 3-Phenoxybenzoic Acid, an Exposure Biomarker of Pyrethroid Insecticides as a Model

Limited reports on the use of nanobodies (Nbs) in fluorescence polarization immunoassay (FPIA) aroused us to explore if the small size of Nbs is a drawback for the development of sensitive FPIA to small molecular compounds, particularly since FPIA is a technology strongly dependent on molecular weight. In the present work, three different molecular weight Nbs against 3-phenoxybenzoic acid (3-PBA), an exposure biomarker of pyrethroid insecticides, including bare Nbs (15 kDa), Nbs-Avidin (Nbs-AV, 60 kDa), and Nbs-Alkaline phosphatase (Nbs-AP, 130 kDa) were specifically generated to cover distinct regions on the polarization and molecular weight relationship curve for a fluorescein tracer. In competitive FPIA, similar half-maximal inhibitory concentrations (IC₅₀) of 3-PBA of 16.4, 12.2, and 14.8 ng mL^-1 were obtained for Nbs, Nbs-AV, and Nbs-AP, respectively, indicating that the size of Nbs in the range tested had no significant effect on the sensitivity of the resulting competitive FPIA. An IC₅₀ of 20.2 ng mL^-1 for an anti-3-PBA polyconal antibody based FPIA further demonstrated the performance of Nbs, which was comparable to that of traditional antibodies in FPIA. Spike-recovery studies showed good and reproducible recovery of 3-PBA in urine samples, demonstrating the applicability of Nb-based FPIA. Overall, our results show that Nb-based FPIA achieves sensitivity levels of FPIA based on conventional antibodies and further indicate that Nb absolutely meets the sensitivity requirement of FPIA.

An impedimetric aptasensor for ultrasensitive detection of Penicillin G based on the use of reduced graphene oxide and gold nanoparticles

The authors describe an impedimetric aptasensor for Penicillin G (PEN) which is an important antibiotic. The method is based on the use of a pencil graphite electrode (PGE) modified with reduced graphene oxide (RGO) and gold nanoparticles (GNPs) for ultrasensitive detection of PEN. The morphology of a bare PGE, RGO/PGE, and GNP/RGO/PGE, and the functional groups on graphene oxide (GO) and RGO were studied using scanning electron microscopy and Fourier transform infrared spectroscopy. Electrochemical impedance spectroscopy was used for detection of PEN by measuring the charge transfer resistance (R_ct). Also, cyclic voltammetry was recorded at potential range of 0.30 to +0.70 V for PGE treatment. This aptamer-based assay has a wide linear range that extends from 1.0 fM to 10 μM, and a limit of detection as low as 0.8 fM. The method was applied to the determination of PEN in spiked milk from cow, sheep, goat and water buffalo. Recoveries ranged from 92% to 104%. The assay is fast, ultrasensitive, high reproducible, and selective over antibiotics such as streptomycin, tetracycline, and sulfadiazine. Graphical abstract Schematic presentation of an impedimetric aptasensor for Penicillin G antibiotic using a pencil graphite electrode (PGE) modified with reduced graphene oxide (RGO) and gold nanoparticles (GNPs). This aptamer based assay has limit of detection as low as 0.8 fM.

High sensitive detection of penicillin G residues in milk by surface-enhanced Raman scattering

The antibiotic residue in animal source foods (milk, meat, etc.) is threatening people's health due to its abusing in livestock breeding more and more seriously. In this study, a simple and sensitive SERS method coupled with a two-step pretreatment process of sample was proposed for the residue detection of penicillin G (PENG) in real milk sample. It can be found that the two-step pretreatment process of sample is an essential procedure for the successful detection of PENG residue in milk, which can effectively avoid interference from other components in the sample and achieve the trace-level detection of PENG residue by SERS. Under the optimal test conditions, the limit of detection of PENG residue is 2.54×10^-9mol/L (equal to 0.85μg/kg), which is lower than the standard of the European Union (4μg/kg). And, there is a good linear relationship (R²=0.9902) in the concentration range of 1.0×10^-8~1.0×10^-3mol/L. By this method, the recovery of PENG residue ranges from 76% to 97% with relative standard deviation between 4.8% and 2.1%. The proposed SERS method can be effectively applied for determination of PENG residue in milk.

Selection of DNA aptamers against penicillin G using Capture-SELEX for the development of an impedimetric sensor

This paper describes for the first time the selection of aptamers selective to penicillin. Aptamers were selected using a specific process called Capture-SELEX (Systematic Evolution of Ligands by Exponential Enrichment). This technique is based on the selection of DNA aptamers using penicillin G in solution while the ssDNA library is fixed on a support. One aptamer showing a good affinity to penicillin was finally selected and tested in electrochemical sensor configuration, using electrochemical impedance spectroscopy as detection technique. The developed aptasensor allowed the detection of penicillin in a wide concentration range, comprised between 0.4 and 1000µgL^-1 Such performance was compatible with milk analysis, as the maximum residue limit tolerated in this matrix is 4µgL^-1. The selectivity of the developed sensor was also studied, showing that the sensor was also able to bind other beta-lactam antibiotics, although with a weaker affinity. Finally the sensor was used for detection of penicillin G in milk. It was shown that a simple sample treatment with isopropanol followed by filtration was sufficient to eliminate matrix effects, allowing the determination of penicillin in milk at concentrations compatible with legislation requirements.

A Fluorescence Polarization Assay To Detect Steroid Hormone Traces in Milk

Steroids are a class of hormones improperly used in livestock as growth-promoting agents. Due to their high risk for human health, the European Union (EU) has strictly forbidden the administration of all natural and synthetic steroid hormones to food-producing animals, and the development of new rapid detection methods are greatly encouraged. This work reports a novel fluorescence polarization assay, ready to use, capable of detecting 17β-estradiol directly in milk samples with a low limit of detection of <10 pmol. It is based on the coupling of monospecific antibodies against 17β-estradiol and fluorophores, capable of modulating the fluorescence polarization emission on the basis of the specific binding of antibodies to fluorescence-labeled 17β-estradiol derivative. The successful detection of 17β-estradiol has disclosed the development of an efficient method, easily extensible to any food matrix and having the potential to become a milestone in food quality and safety.