Phosphorus-doped helical carbon nanofibers as enhanced sensing platform for electrochemical detection of carbendazim

Synthesis of Carbon Dots from Peltophorum Pterocarpum Flowers for Selective Fluorescence Detection of Carbendazim

In this study, carbon dots (CDs) were synthesized from Peltophorum pterocarpum flowers as the precursor material using the hydrothermal method. The fluorescence emission spectra of the resulting Peltophorum pterocarpum CDs (PP-CDs) exhibited excitation-independent behavior, showing the fluorescence emission peak at 410 nm when excited at 330 nm. This method is simple, rapid and well consistent with the green chemistry and sustainable analytical method development. The as-synthesized PP-CDs acted as a promising fluorescent probe for detecting carbendazim (CBZ) via aggregation-induced emission mechanism, showing a linear response to CBZ concentrations ranging from 1 to 30 μM, with a detection limit of 5.41 nM. This method was successfully applied to quantify CBZ in food samples, achieving excellent recoveries of 99% with a relative standard deviation (RSD) of less than 2%.

2D/1D VSe2/MWCNT hybrid-based electrochemical sensor for carbendazim quantification of environmental, food, and biological samples

For the first time the sensitive determination of carbendatim (CRB) is reported utilizing a well-designed sensing architecture based on vanadium diselenide-multiwalled carbon nanotube (VSMC). FTIR, XRD, FESEM, EDS, and EIS were employed to evaluate the sensor's structural integrity, and the results demonstrated the successful integration of nanomaterials, resulting in a robust and sensitive electrochemical sensor. Cyclic voltammetry (CV) and chronoamperometric (CA) investigations showed that the sensor best performed at pH 8.0 (BRB) with an excellent detection limit of 9.80 nM with a wide linear range of 0.1 to 10.0 µM. A more thermodynamically viable oxidation of CRB was observed at the VSMC/GCE, with a shift of 200 mV in peak potential towards the less positive side compared with the unmodified GCE. In addition, the sensor demonstrated facile heterogeneous electron transfer, favorable anti-fouling traits in the presence of a wide range of interferents, good stability, and reproducible analytical performance. Finally, the developed sensor was validated for real-time quantification of CRB from spiked water, food, and bio-samples, which depicted acceptable recoveries (98.6 to 101.5%) with RSD values between 0.35 and 2.23%. Further, to derive the possible sensing mechanism, the valence orbitals projected density of states (PDOS) for C, H, and N atoms of an isolated CRB molecule, VSe2 + CNT and VSe2 + CNT + CRB were calculated using density functional theory (DFT) calculations. The dominant charge transfer from the valence 2p-orbitals of the C and N atoms of CRB to CNT is responsible for the electrochemical sensing of CRB molecules.

Advancements in nanomaterials for nanosensors: a comprehensive review

Nanomaterials (NMs) exhibit unique properties that render them highly suitable for developing sensitive and selective nanosensors across various domains. This review aims to provide a comprehensive overview of nanomaterial-based nanosensors, highlighting their applications and the classification of frequently employed NMs to enhance sensitivity and selectivity. The review introduces various classifications of NMs commonly used in nanosensors, such as carbon-based NMs, metal-based NMs, and others, elucidating their exceptional properties, including high thermal and electrical conductivity, large surface area-to-volume ratio and good biocompatibility. A thorough examination of literature sources was conducted to gather information on NMs-based nanosensors' characteristics, properties, and fabrication methods and their application in diverse sectors such as healthcare, environmental monitoring, industrial processes, and security. Additionally, advanced applications incorporating machine learning techniques were analyzed to enhance the sensor's performance. This review advances the understanding and development of nanosensor technologies by providing insights into fabrication techniques, characterization methods, applications, and future outlook. Key challenges such as robustness, biocompatibility, and scalable manufacturing are also discussed, offering avenues for future research and development in this field.

Design and synthesis of polypyrrole conductive ink based on sulfated chitosan for bactericide carbendazim detection

Conductive polymers (CPs) are typically insoluble in solvents, and devising biocompatible hydrophilic CPs is challenging and imperative to expand the applications of CPs. Herein, sulfated chitosan (SCS) is used as a green dopant instead of toxic poly(styrene sulfonate) (PSS), and SCS:polypyrrole (SCS:PPy) conductive ink is prepared by in situ polymerization. Due to the complex structure between PPy and SCS polyanion, the synthesized SCS:PPy dispersion forms a well-connected electric pathway and confers superior conductivity, dispersion stability, good film-forming ability, and high electrical stability. As proof of our concept, electrochemical sensing utilizing an SCS:PPy-modified screen-printed carbon electrode (SPCE) was performed towards carbendazim (CBZ). The SCS:PPy on the SPCE surface displayed greater sensitivity to CBZ because the conductive complex structure eased the electrocatalytic action of SCS:PPy by dramatically increasing the current intensity of CBZ oxidation and notably ameliorating stability. The sensor unveils the lowest detection value of 1.02 nM with a linear range of 0.05 to 906 μM for sensing trace CBZ by utilizing the pulse voltammetry technique. Interestingly, this senor shows excellent selectivity towards CBZ due to the formation of substantial interactions between SCS:PPy and CBZ, as demonstrated by molecular simulation studies. Furthermore, this sensor can precisely monitor CBZ in actual fruit and river water samples with satisfactory results. This study sheds light on the design and synthesis of sustainable hydrophilic CPs in the fabrication of sensors.

Nanozyme-Enhanced Electrochemical Biosensors: Mechanisms and Applications

Nanozymes, as innovative materials, have demonstrated remarkable potential in the field of electrochemical biosensors. This article provides an overview of the mechanisms and extensive practical applications of nanozymes in electrochemical biosensors. First, the definition and characteristics of nanozymes are introduced, emphasizing their significant role in constructing efficient sensors. Subsequently, several common categories of nanozyme materials are delved into, including metal-based, carbon-based, metal-organic framework, and layered double hydroxide nanostructures, discussing their applications in electrochemical biosensors. Regarding their mechanisms, two key roles of nanozymes are particularly focused in electrochemical biosensors: selective enhancement and signal amplification, which crucially support the enhancement of sensor performance. In terms of practical applications, the widespread use of nanozyme-based electrochemical biosensors are showcased in various domains. From detecting biomolecules, pollutants, nucleic acids, proteins, to cells, providing robust means for high-sensitivity detection. Furthermore, insights into the future development of nanozyme-based electrochemical biosensors is provided, encompassing improvements and optimizations of nanozyme materials, innovative sensor design and integration, and the expansion of application fields through interdisciplinary collaboration. In conclusion, this article systematically presents the mechanisms and applications of nanozymes in electrochemical biosensors, offering valuable references and prospects for research and development in this field.

ZIF-67-Derived Co/N-Doped Carbon-Functionalized MXene for Enhanced Electrochemical Sensing of Carbendazim

Herein, ZIF-67-derived Co and N-doped carbon (Co/NC) particle-modified multilayer MXene (MXene@Co/NC) was developed as remarkable electrode material for carbendazim (CBZ) detection. MXene as a substrate provides an excellent conductive framework and plentiful accessibility sites. Co/NC particles embedding in MXene can not only prevent the interlayer stacking of MXene but also contribute a great deal of metal catalytic active sites and finally improve the adsorption and catalytic properties of the composite. Accordingly, the MXene@Co/NC electrode displays excellent electrocatalytic activity toward CBZ oxidation. Experimental parameters such as pH value, accumulation time, MXene@Co/NC modification volume and constituent materials' mass ratios were optimized. Under optimal conditions, the as-prepared sensor based on MXene@Co/NC holds a broad linearity range from 0.01 μM to 45.0 μM with a low limit of detection (LOD) of 3.3 nM (S/N = 3, S means the detection signal, while N represents the noise of the instrument). Moreover, the proposed sensor displays excellent anti-interference ability, superior reproducibility, excellent stability, and successfully achieves actual applications for CBZ detection in a lettuce sample.

Preparation and usage of nanomaterials in biomedicine

Nanotechnology is one of the most promising and decisive technologies in the world. Nanomaterials, as the primary research aspect of nanotechnology, are quite different from macroscopic materials because of their unique optical, electrical, magnetic, thermal properties, and more robust mechanical properties, which make them play an essential role in the field of materials science, biomedical field, aerospace field, and environmental energy. Different preparation methods for nanomaterials have various physical and chemical properties and are widely used in different areas. In this review, we focused on the preparation methods, including chemical, physical, and biological methods due to the properties of nanomaterials. We mainly clarified the characteristics, advantages, and disadvantages of different preparation methods. Then, we focused on the applications of nanomaterials in biomedicine, including biological detection, tumor diagnosis, and disease treatment, which provide a development trend and promising prospects for nanomaterials.

Electroanalytical overview: the sensing of carbendazim

Carbendazim is a broad-spectrum systemic fungicide that is used to control various fungal diseases in agriculture, horticulture, and forestry. Carbendazim is also used in post-harvest applications to prevent fungal growth on fruits and vegetables during storage and transportation. Carbendazim is regulated in many countries and banned in others, thus, there is a need for the sensing of carbendazim to ensure that high levels are avoided which can result in potential health risks. One approach is the use of electroanalytical sensors which present a rapid, but highly selective and sensitive output, whilst being economical and providing portable sensing platforms to support on-site analysis. In this minireview, we report on the electroanalytical sensing of carbendazim overviewing recent advances, helping to elucidate the electrochemical mechanism and provide conclusions and future perspectives of this field.

Rational design of Nd2O3 decorated functionalized carbon nanofiber composite for selective electrochemical detection of carbendazim fungicides in vegetables, water, and soil samples

Abuse of carbendazim (CBZ) leaves excessive pesticide residues on agricultural products, which endangers human health because of the residues' high concentrations. Hence, a composite consisting of functionalized carbon nanofibers (f-CNF) with neodymium oxide (Nd₂O₃) was fabricated to monitor CBZ at trace levels. The Nd₂O₃/f-CNF composite-modified electrode displays higher electro-oxidation ability towards CBZ than Nd₂O₃ and f-CNF-modified electrodes. The combined unique properties of Nd₂O₃ and f-CNF result in a substantial specific surface area, superior structural stability, and excellent electrocatalytic activity of the composite yielding enhanced sensitivity to detecting CBZ with a detection limit of 4.3 nM. Also, the fabricated sensor electrode can detect CBZ in the linear concentration range of up to 243.0 μM with high selectivity, appropriate reproducibility, and stability. A demonstration of the sensing capability of CBZ in vegetables, water, and soil samples was reported paving the way for its use in practical applications.

Nanofiber-based sorbents: Current status and applications in extraction methods

Advanced sorbents gradually become a research hotspot on account of the increasing attention paid to environmental problems. Due to the prominent physicochemical features of nanofibers (NFs), such as high porosity, large surface area, favorable interconnectivity, high adsorption capacity, wettability, and the possibility of surface modification using functional groups, these nanostructures are regarded as excellent candidates for extraction applications. Therefore, the research in the field of NFs and their nanocomposites has been increasing in recent years. In the present review, we summarize the most recent studies on NFs-based sorbents focusing on strategies for preparation, characterization, and their unique capabilities as porous sorbents in various sorbent-based extraction methods. Moreover, we further described the performance and selectivity of sorbents to achieve improved extraction efficiency. Finally, some perspectives on the challenges and outlook are provided to aid future investigations related to this topic.

Synergistic formation of samarium oxide/graphene nanocomposite: A functional electrocatalyst for carbendazim detection

Herein, an electrochemical sensor based on samarium oxide anchored, reduced graphene oxide (Sm₂O₃/RGO) nanocomposite was developed for the rapid detection of carbendazim (CBZ). Different characterization methods were infused to deeply examine the morphology, composition, and elemental state of Sm₂O₃/RGO nanocomposite. The Sm₂O₃/RGO modified electrode exhibits an excellent electro-catalytic performance toward CBZ detection with a peak potential of +1.04 V in phosphate buffer solution (pH 3.0), which is superior to the RGO-, Sm₂O₃- and bare- electrodes. This remarkable activity can be credited to the synergetic effect generated by the robust interaction between Sm₂O₃ and RGO, resulting in a well-enhanced electrochemical sensing ability. Impressively, the fabricated sensor shows improved electrochemical performance in terms of the wide working range, detection limit, and strong sensitivity. On a peculiar note, the electrochemical sensing performances of CBZ detection based on Sm₂O₃/RGO nanocomposite demonstrate an extraordinary behavior compared to the prior documented electro-catalyst. In addition, the fabricated Sm₂O₃/RGO sensor also displays good operational stability, reproducibility, and repeatability towards the detection of CBZ. Furthermore, it was successfully applied to the CBZ detection in food and environmental water samples with satisfactory recovery. In accordance with our research findings, the Sm₂O₃/RGO nanocomposite could be used as an electro-active material for effectual electrochemical sensing of food and environmental pollutants.

Highly sensitive detection of carbendazim in juices based on mung bean-derived porous carbon@chitosan composite modified electrochemical sensor

We reported a simple and scalable strategy for the preparation of mung bean-derived porous carbon@chitosan (MBC@CTS) composite, which was used to optimize the glassy carbon electrode (GCE). The MBC@CTS/GCE sensor was applied for the carbendazim (CBZ) detection. For the MBC@CTS composite, MBC with three-dimensional hierarchical structure presented large specific surface area, good adsorbability, and high electrical conductivity, while CTS had good film-forming property, hydrophilicity performance, and adhesion capacity. The MBC@CTS/GCE sensor exhibited wonderful electrochemical detection performance towards CBZ. Under the optimized conditions, the MBC@CTS/GCE sensor showed a linear concentration range from 0.1 to 20 μM with relatively low limit of detection (LOD) of 20 nM. In addition, the fabricated sensor with good reproducibility, stability, and selectivity were successfully applied for the CBZ detection in apple and tomato juices with low relative standard deviation of 2.4 %-4.2% and satisfactory recoveries of 98.8-103.2%.

Se substituted 2D-gC3N4 modified disposable screen-printed carbon electrode substrate: A bifunctional nano-catalyst for electrochemical and absorption study of hazardous fungicide

The indispensable usage of pesticides for the control and prevention of pests is probable and includes several types based on the problems in the crops. Among them, fungicides, are one problem-solving agent curing fungal developments. the disproportionate use of fungicides will lead to environmental deterioration and several health issues. The assessment of such fungicides is highly motivated to be detected. Under the class of two-dimensional materials, graphitic carbon nitride (GCN) with high surface area and high electrocatalytic activity was chosen as electrode material. The efficiency of GCN was improved with the subsequent substitution of selenium (Se) into the triazine ring as Se-GCN. The structural and surface analysis was done and the layered structure was proved. The electrochemical detection of CBM showed a lower detection limit at 6 nM with a linear range 0.099 μM-346.9 μM while, the absorption studies showed a LOD of 20 nM with a linear range of 0.099 μM-182.09 μM. The orange juice and vegetable extract samples had good recovery with CBM at Se-GCN modified disposable screen-printed electrode. The developed disposable electrode was more sensitive with 6.45 μAμM^-1cm² sensitivity and highly reactive with CBM. Moreover, the developed sensor will be more effective in sensing applications to avoid the menace generated by several agents.

Versatile Carbon Nanofiber-Based Sensors

Carbon nanofibers (CNFs) display colossal potential in different fields like energy, catalysis, biomedicine, sensing, and environmental science. CNFs have revealed extensive uses in various sensing platforms due to their distinctive structure, properties, function, and accessible surface functionalization capabilities. This review presents insight into various fabrication methods for CNFs like electrospinning, chemical vapor deposition, and template methods with merits and demerits of each technique. Also, we give a brief overview of CNF functionalization. Their unique physical and chemical properties make them promising candidates for the sensor applications. This review offers detailed discussion of sensing applications (strain sensor, biosensor, small molecule detection, food preservative detection, toxicity biomarker detection, and gas sensor). Various sensing applications of CNF like human motion monitoring and energy storage and conversion are discussed in brief. The challenges and obstacles associated with CNFs for futuristic applications are discussed. This review will be helpful for readers to understand the different fabrication methods and explore various applications of the versatile CNFs.

Silver ions involved fluorescence "on-off" responses of gold nanoclusters system for determination of carbendazim residues in fruit samples

Herein, a fluorescence "on-off" system was developed for monitoring carbendazim (CBZ) residues in fruit samples, based on glutathione-gold nanoclusters (GSH-Au NCs) and silver ions (Ag⁺). First, the fluorescence intensity of GSH-Au NCs was greatly enhanced (turn on) with aggregation-induced emission enhancement (AIEE) effect in the presence of Ag⁺, then fluorescence quenching occurred (turn off) with adding CBZ by the chelation between CBZ and Ag⁺. The quenching degree was well linearly dependent on CBZ concentration covering from 0.5 to 20 μM. Moreover, the GSH-Au NCs-Ag⁺ system exhibited superior selectivity towards CBZ and was sensitive for the determination of CBZ in apple and orange juices with a low detection limit of 0.12 μM. The recoveries of CBZ spiked in fruit samples ranged from 81.0 % to 111.4% with the relative standard deviations less than 6.6%, demonstrating its great potential for monitoring CBZ residues in fruit samples.

Simultaneous determination of benzimidazole fungicides in food using signal optimized label-free HAu/Ag NS-SERS sensor

Extensively employed pesticide in agriculture causes residue in food products that would threaten public health safety. The surface-enhanced Raman scattering (SERS) signal reliant on double sensing of carbendazim and thiabendazole in a single step is achieved without the aid of any bio-recognition element. A label-free anisotropic bimetallic hollow Au/Ag nanostars (HAu/Ag NS) SERS substrate was synthesized with numerous hot spots for Raman molecule through a galvanic displacement-free deposition. The individual and mixed analyte calibration results were compared based on the identified peak at 1224 (carbendazim) and 778 (thiabendazole) cm^-1 and exhibited insignificant differences. The sensor could detect carbendazim and thiabendazole up to 4.28 × 10^-4 and 6.04 × 10^-4 µg·g^-1 or µg·mL^-1 in both individual and mixture of their extract. The recovery for accuracy and precision analysis was 91.54-98.26 % in rice and water. Finally, validation results were achieved satisfactorily (p > 0.05) with HPLC.

Vertically-Ordered Mesoporous Silica Films Grown on Boron Nitride-Graphene Composite Modified Electrodes for Rapid and Sensitive Detection of Carbendazim in Real Samples

Carbendazim (CBZ), a kind of widely used pesticide, is harmful to human health and environmental ecology. Therefore, it is of great importance to detect CBZ in real samples. Herein we report the stable growth of vertically-ordered mesoporous silica films (VMSF) on the glassy carbon electrode (GCE) using boron nitride-reduced graphene oxide (BN-rGO) nanocomposite as an adhesive and electroactive layer. Oxygen-containing groups of rGO and 2D planar structure of BN-rGO hybrid favor the stable growth of VMSF via the electrochemically assisted self-assembly (EASA) method. Combining the good electrocatalytic activity of BN-rGO and the enrichment effect of VMSF, the proposed VMSF/BN-rGO/GCE can detect CBZ with high sensitivity (3.70 μA/μM), a wide linear range (5 nM–7 μM) and a low limit of detection (2 nM). Furthermore, due to the inherent anti-fouling and anti-interference capacity of VMSF, direct and rapid electrochemical analyses of CBZ in pond water and grape juice samples are also achieved without the use of complicated sample treatment processes.

Gadolinium sesquisulfide anchored N-doped reduced graphene oxide for sensitive detection and degradation of carbendazim

Agriculture is having a major role in solving issues associated with food shortages across the globe. Carbendazim (CZM) is one of the fungicides which is commonly used in agriculture to grow crops in large quantities and fast. Monitoring CZM content is in high demand for environmental remediation. The present work deals with the synthesis of gadolinium sesquisulfide anchored Nitrogen-doped reduced graphene oxide (Gd₂S₃/NRGO) through a simple microwave-assisted method. X-ray diffraction and morphological studies confirm the formation of the nanocomposite. Gd₂S₃/NRGO showed enhanced activity both in electrochemical detection and light-driven degradation of CZM compared to Gd₂S₃ and NRGO. Gd₂S₃/NRGO modified glassy carbon electrode (GCE) exhibit a wide linear range of 0.01-450 μM CZM with 0.009 μM LOD using differential pulse voltammetry (DPV). Gd₂S₃/NRGO@GCE showed good selectivity, stability, and recovery (98.13-99.10%) in the river water sample. In addition, Gd₂S₃/NRGO has been explored towards the visible-light-induced degradation of CZM. The reactions conditions were optimized to achieve maximum efficiency. 94% of CZM was degraded within 90 min in presence of Gd₂S₃/NRGO. Mechanism of electrochemical redox reaction and degradation of CZM in presence of Gd₂S₃/NRGO has been explored to the maximum extent possible. Degradation intermediates were identified using LC-MS.

A novel electrochemical sensor based on β-cyclodextrin functionalized carbon nanosheets@carbon nanotubes for sensitive detection of bactericide carbendazim in apple juice

Carbendazim (CBZ) abuse always causes the over-standard of pesticide residues in agricultural products, which has adverse effects on human health. Herein, a novel electrochemical sensor was firstly fabricated based on the β-cyclodextrin (β-CD) functionalized carbon nanosheets@carbon nanotubes (CNS@CNT) for the CBZ determination. CNS@CNT combined large surface area of CNS and excellent electrical conductivity of CNT, which significantly enhanced the electrocatalytic performance. Moreover, β-CD possessed excellent host-gest supramolecular recognition ability, which could improve the selective recognition and enrichment capability of CBZ. Thanks to the synergistic interaction of CNS@CNT and β-CD, the β-CD/CNS@CNT/GCE sensor exhibited a low limit of detection of 9.4 nM in the linear CBZ concentration range of 0.03-30 μM. The fabricated sensor presented favorable stability, high sensitivity (30.86 μA μM^-1 cm^-2), and reliable reproducibility (RSD = 3.6%). Especially, the β-CD/CNS@CNT/GCE sensor could show pretty practical feasibility for the detection of CBZ in apple juice with recoveries of 97.1%-99.4%.

Impact of gadolinium oxide with functionalized carbon nanosphere: A portable advanced electrocatalyst for pesticide detection in aqueous environmental samples

In this study, we developed a portable electrochemical sensor for realizing the pesticide residue in biological, environmental, and vegetable samples. A lower concentration of carbendazim pesticide (CBZ) was electrochemically exposed by newly developed gadolinium oxide/functionalized carbon nanosphere modified glassy carbon electrode (Gd₂O₃/f-CNS/GCE). The Gd₂O₃/f-CNS composite was prepared by two-pot ultrasonic-assisted co-precipitation method and characterized by various physicochemical analytical techniques. In addition, the electrocatalytic activity of the composite was investigated by cyclic voltammetry (CV) towards the detection of CBZ. Besides, the Gd₂O₃/f-CNS/GCE exhibited excellent electrocatalytic capability and sensitivity towards the oxidation of CBZ due to its high electrochemical active surface area, good conductivity, and fast electron transfer ability. A wide linear range of CBZ (0.5-552 μM) was attained with a low level of detection (LOD) of 0.009 μM L^-1 and exceptional stability of 93.41%. The proposed sensor exemplifies practical feasibility in blood serum, water, and vegetable samples with an remarkable recovery range of 96.27-99.44% and primary current response of ∼91% after 15 days.

A novel electrochemical sensor based on molecularly imprinted polymer-modified C-ZIF67@Ni for highly sensitive and selective determination of carbendazim

In this work, we propose a two-step coating method, combining C-ZIF67@Ni with molecular imprinting polymer (MIP), to develop a high-sensitivity and high-selectivity Carbendazim (CBD) electrochemical sensor. ZIF67@Ni was prepared by a simple chemical bath method, and C-ZIF67@Ni was obtained by high-temperature carbonization of ZIF67@Ni. Then, MIP layer was prepared by electrochemical in-situ polymerization, with O-aminophenol as functional monomers, CBD acting as template on the surface of the C-ZIF67@Ni-modified glassy carbon electrode (GCE). During the preparation process, the types of functional monomers, the polymerization solution pH, the ratio of functional monomers to template molecules, and the incubation time are optimized. The morphological characteristics, composition information and electrochemical properties of MIP/C-ZIF67@Ni/GCE were investigated in detail under optimal conditions. Physical characterization and electrochemical tests revealed that ZIF67@Ni significantly improves the electron transmission capacity and surface area of the sensor after high-temperature carbonization. C-ZIF67@ Ni has a good synergistic effect on MIP, allowing rapid and specific identification of the test substance. MIP/C-ZIF67@Ni/GCE showed a good linear relationship with CBD in the concentration range from 4 × 10^-13 M to 1 × 10^-9 M, the lowest detection limit was 1.35 × 10^-13 M (S/N = 3) R² = 0.9983 and RSD = 2.34. Additionally, the sensor showed good repeatability, stability, and selectivity, and can be used for the detection of carbendazim in soil and water with a recovery of 98% above.

Electrochemical detection of carbendazim with mulberry fruit-like gold nanocrystal/multiple graphene aerogel and DNA cycle amplification

An aptasensor for electrochemical detection of carbendazim is reported with mulberry fruit-like gold nanocrystal (MF-Au)/multiple graphene aerogel (MGA) and DNA cycle amplification. HAuCl₄ was reduced by ascorbic acid in a CTAC solution containing KBr and KI and formed trioctahedron gold nanocrystal. The gold nanocrystal underwent structural evolution under enantioselective direction of l-cysteine. The resulting MF-Au shows a mulberry fruit-like nanostructure composed of gold nanocrystals of about 200 nm as the core and many irregular gold nanoparticles of about 30 nm as the shell. The exposure of high-index facets improves the catalytic activity of MF-Au. MF-Au/MGA was used for the construction of an aptasensor for electrochemical detection of carbendazim. The aptamer hybridizes with assistant strand DNA to form duplex DNA. Carbendazim binds with the formed duplex DNA to release assistant strand DNA, triggering one three-cascade DNA cycle. The utilization of a DNA cycle allows one carbendazim molecule to bring many methylene blue–labeled DNA fragments to the electrode surface. This promotes significant signal amplification due to the redox reaction of methylene blue. The detection signal is further enhanced by the catalysis of MF-Au and MGA towards the redox of methylene blue. A differential pulse voltammetric signal, best measured at − 0.32 V vs. Ag/AgCl, increases linearly with the carbendazim concentration ranging from 1.0 × 10⁻¹⁶ to 1.0 × 10⁻¹¹ M with a detection limit of 4.4 × 10⁻¹⁷ M. The method provides ultrahigh sensitivity and selectivity and was successfully applied to the electrochemical detection of carbendazim in cucumber.

Facile synthesis of single-crystalline Fe-doped copper vanadate nanoparticles for the voltammetric monitoring of lethal hazardous fungicide carbendazim

The highly selective and sensitive electrochemical detection of highly toxic fungicide carbendazim (CBZ) by the iron (Fe)-doped copper vanadate (CuVO₄; CuV) is discussed. The Fe-doped copper vanadate (Fe-CuV) is prepared by the simple co-precipitation method followed by an annealing process which produced high crystallinity. The material properties of Fe-CuV are characterized by XRD, Raman spectrometry, XPS analysis, HRTEM, and SAED pattern. The electrochemical characterization of Fe-CuV towards CBZ detection are done by CV and DPV techniques. The Fe-CuV/GCE exhibits good electroanalytical activity towards the electro-oxidation of CBZ at the potential of 0.81 V vs Ag/AgCl. The developed sensor electrode revealed a linear range of 0.01 to 83.1 μM and a limit of detection of about 5 nM. In addition, Fe-CuV/GCE reveals good storage stability (RSD = 2.63%) and reproducibility (RSD = 2.85%) for the electro-oxidation of CBZ. The electrode material was applied to the detection of CBZ in apple juice and soy milk samples, and the results were discussed. Thus, our projected Fe-CuV/GCE can be employed as electrode material in a rapid onsite sensor for the detection and determination of noxious pollutants.

MXene@Ag-based ratiometric electrochemical sensing strategy for effective detection of carbendazim in vegetable samples

In this paper, a novel ratiometric electrochemical sensor for carbendazim (CBZ) detection was constructed by a composite of MXene@Ag nanoclusters and amino-functionalized multi-walled carbon nanotubes (MXene@AgNCs/NH₂-MWCNTs). The Ag nanoclusters (AgNCs) embedded in the MXene not only could inhibit the aggregation of MXene flakes and enhance the electrocatalytic ability, but also serve as an internal reference probe for the ratiometric electrochemical detection. Moreover, the introduction of NH₂-MWCNTs can further improve the electrochemical signals of CBZ and Ag, resulting in the enhanced signal amplification and higher sensitivity. Based on these characteristics of the MXene@AgNCs/NH₂-MWCNTs composite, the proposed sensor exhibits a favorable linear relationship between I_CBZ/I_AgNCs and the concentration of CBZ ranging from 0.3 nM to 10 μM and a low limit of detection of 0.1 nM. Moreover, the proposed ratiometric electrochemical sensing platform also demonstrates high selectivity, good reproducibility, secular stability, and satisfactory applicability in vegetable samples.

A comprehensive review summarizing the recent biomedical applications of functionalized carbon nanofibers

Since the discovery and fabrication of carbon nanofibers (CNFs) over a decade ago, scientists foster to discover novel myriad potential applications for this material in both biomedicine and industry. The unique economic viability, mechanical, electrical, optical, thermal, and structural properties of CNFs led to their rapid emergence. CNFs become an artificial intelligence platform for different uses, including a wide range of biomedical applications. Furthermore, CNFs have exceptionally large surface areas that make them flexible for tailoring and functionalization on demand. This review highlights the recent progress and achievements of CNFs in a wide range of biomedical fields, including cancer therapy, biosensing, tissue engineering, and wound dressing. Besides the synthetic techniques of CNFs, their potential toxicity and limitations, as biomaterials in real clinical settings, will be presented. This review discusses CNF's future investigations in other biomedical fields, including gene delivery and bioimaging and CNFs risk assessment.

Anchoring Metallic MoS2 Quantum Dots over MWCNTs for Highly Sensitive Detection of Postharvest Fungicide in Traditional Chinese Medicines

Carbendazim, a very common contamination to the traditional Chinese medicines (TCMs), has posed serious threat to the environment and human health. However, sensitive and selective detection of carbendazim (MBC) in the TCMs is a big challenge for their complex chemical constituents. In this work, a 0D/1D nanohybrid was developed by anchoring 1T-phased MoS₂ quantum dots (QDs) over multiwall carbon nanotubes (MWCNTs) via a facile assembly method. High-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis (TGA) together with EIS reveal that the 1T-phased QDs can anchor over MWCNTs via van der Waals forces, and the anchoring improves the nanohybrid surface area and conductivity. Therefore, the electrochemical sensor fabricated based on the MoS₂ QDs@MWCNT nanohybrid shows excellent catalytic activity to MBC oxidation. Under optimized conditions, the sensor presents a linear voltammetry response to MBC concentration from 0.04 to 1.00 μmol·L^-1, a low detection limit of 2.6 × 10^-8 mol·L^-1, as well as high selectivity, good reproducibility, and long-term stability. Moreover, the sensor has been successfully employed to determine MBC in two typical TCMs and the obtained recoveries are in good accordance with the results achieved by HPLC, showing that the constructed sensor plate holds great practical application in MBC analysis with complex matrix.

Voltamperometric Sensors and Biosensors Based on Carbon Nanomaterials Used for Detecting Caffeic Acid-A Review

Caffeic acid is one of the most important hydroxycinnamic acids found in various foods and plant products. It has multiple beneficial effects in the human body such as antioxidant, antibacterial, anti-inflammatory, and antineoplastic. Since overdoses of caffeic acid may have negative effects, the quality and quantity of this acid in foods, pharmaceuticals, food supplements, etc., needs to be accurately determined. The present paper analyzes the most representative scientific papers published mostly in the last 10 years which describe the development and characterization of voltamperometric sensors or biosensors based on carbon nanomaterials and/or enzyme commonly used for detecting caffeic acid and a series of methods which may improve the performance characteristics of such sensors.

Mxene/carbon nanohorn/β-cyclodextrin-Metal-organic frameworks as high-performance electrochemical sensing platform for sensitive detection of carbendazim pesticide

Pesticides play an important role in agricultural fields, but the pesticide residues pose strong hazardous to human health, thus designing sensitive and fast method for pesticides monitor is highly urgent. Herein, nanoarchitecture of Mxene/carbon nanohorns/β-cyclodextrin-Metal-organic frameworks (MXene/CNHs/β-CD-MOFs) was exploited as electrochemical sensing platform for carbendazim (CBZ) pesticide determination. β-CD-MOFs combined the properties of host-guest recognition of β-CD and porous structure, high porosity and pore volume of MOFs, enabling high adsorption capacity for CBZ. MXene/CNHs possessed large specific surface area, plenty of available active sites, high conductivity, which afforded more mass transport channels and enhances the mass transfer capacity and catalysis for CBZ. With the synergistic effect of MXene/CNHs and β-CD-MOFs, the MXene/CNHs/β-CD-MOFs electrode extended a wide linear range from 3.0 nM to 10.0 μM and a low limit of detection (LOD) of 1.0 nM (S/N = 3). Additionally, the prepared sensor also demonstrated high selectivity, reproducibility and long-term stability, and satisfactory applicability in tomato samples.

Electrochemical sensor based on biochar and reduced graphene oxide nanocomposite for carbendazim determination

For the first time, a nanocomposite based on biochar and reduced graphene oxide (rGO) was employed to construct a modified carbon paste electrode and applied for the determination of carbendazim (CBZ). Biochar was obtained by through pyrolysis of Eichhornia crassipes biomass, also known how "Aguapé" at 400 °C. The modified electrode with our nanocomposite proposal shows to be able to preconcentrate CBZ and presented the highest analytical response in comparison to the unmodified electrode and by the electrodes prepared with the proposed materials separately. Using differential pulse voltammetry (DPV) under optimized conditions, the sensor showed a linear dynamic response (LDR) from 30 to 900 nmol L^-1, a limit of detection (LOD) of 2.3 nmol L^-1 and limit of quantification (LOQ) of 7.7 nmol L^-1. No significant influence of inorganic ions or organic compounds on sensor response was verified, considering the recovery evaluation data. The proposed sensor was successfully applied for the determination of CBZ in spiked whole orange juice, lettuce leaves, drinking water, and wastewater samples. Good recovery values were found using the ex-situ methodology, showing excellent analytical performance of the electrochemical sensor based on biochar and rGO nanocomposite.

Electro-spinning fabrication of nitrogen, phosphorus co-doped porous carbon nanofiber as an electro-chemiluminescent sensor for the determination of cyproheptadine

Nitrogen, phosphorus co-doped porous carbon nanofiber (N, P-PCNF) is prepared by electrospinning the mixed solution of polyacrylonitrile (PAN), polyvinylpyrrolidone (PVP) and phosphoric acid followed by carbonization. The N, P-PCNF as a modified electrode material is directly used to fabricate an electro-chemiluminescent sensor for determination of cyproheptadine, and owing to the large specific area, more active sites and promotion of electron transfer, the sensor exhibits high electro-catalytic activity, high sensitivity, a good linear relationship ranging from 1.0 × 10-7 to 1.0 × 10-5 mol L-1 and a low detection limit (2.89 × 10-8 mol L-1). In addition, the good recoveries indicate that the sensor is a promising device for the detection of cyproheptadine in real samples.

Design and Construction of the Gadolinium Oxide Nanorod-Embedded Graphene Aerogel: A Potential Application for Electrochemical Detection of Postharvest Fungicide

The rapid development of electrochemical sensors holds great promise to serve as next generation point-of-care safety devices. However, the practical performances of electrochemical sensors are cruelly limited by stability, selectivity, and sensitivity. These issues have been well addressed by introducing rational designs into the modified electrode for achieving the required performances. Herein, we demonstrate the gadolinium oxide nanorods embedded on the graphene aerogel (GdO NRs/GA) for a highly selective electrochemical detection of carbendazim (CDM). The GdO NRs/GA nanocomposite was characterized using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, field emission gun scanning electron microscopy, transmission electron microscopy with elemental mapping, and energy-dispersive spectrometry. The GdO NRs/GA-modified electrode shows a much improved electrochemical performance compared to other electrodes. Interestingly, the GdO NRs are strongly anchored in the GA matrix, which provides a more sufficient pathway for the rapid electron and ion transportation. On the basis of these findings, our proposed sensor achieves a wide detection range from 0.01 to 75 μM with a correlation coefficient of 0.996 and a low detection limit of 3.0 nM. Most markedly, the real-time monitoring of the proposed electrochemical sensor was proved by the successful determination of CDM in environmental samples. Our research work has opened a novel way to the rationale for the construction of highly efficient practical electrochemical sensors.

A novel and sensitive ratiometric fluorescence assay for carbendazim based on N-doped carbon quantum dots and gold nanocluster nanohybrid

A novel fluorescence "turn on" ratiometric fluorescent sensor was employed to determine carbendazim. The sensing process was achieved through the strong fluorescence resonance energy transfer (FRET) between nitrogen doped carbon quantum dots (N-CQDs) and gold nanocluster (AuNCs). The photoluminescence intensity of N-CQDs can be deactivated by AuNCs through FRET effect and recovered by the addition of carbendazim. The ratiometric detection of carbendazim is achieved by recording the photoluminescence and second-order Rayleigh scattering (SRS) signal of N-CQDs/AuNCs system. With the introduction of carbendazim to the sensing platform resulted in the photoluminescence and SRS signal of N-CQDS/AuNCs enhancing. UV-vis absorption, Zeta potential and fluorescence lifetime analyses indicate that the fluorescence turn on process can be attributed to the aggregation of AuNCs breaks the FRET process and increases SRS intensity. N-CQDs/AuNCs probe present a good sensitivity and selectivity for carbendazim detection, with two linear response ranges (1-100 μM, 150-1000 μM), low detection limit of 0.83 μM and 37.25 μM. Furthermore, real sample analyses indicate that the as-presented sensor has potentials in carbendazim determination in real sample analyses.

Nanostructured Organic/Hybrid Materials and Components in Miniaturized Optical and Chemical Sensors

In the last decade, biochemical sensors have brought a disruptive breakthrough in analytical chemistry and microbiology due the advent of technologically advanced systems conceived to respond to specific applications. From the design of a multitude of different detection modalities, several classes of sensor have been developed over the years. However, to date they have been hardly used in point-of-care or in-field applications, where cost and portability are of primary concern. In the present review we report on the use of nanostructured organic and hybrid compounds in optoelectronic, electrochemical and plasmonic components as constituting elements of miniaturized and easy-to-integrate biochemical sensors. We show how the targeted design, synthesis and nanostructuring of organic and hybrid materials have enabled enormous progress not only in terms of modulation and optimization of the sensor capabilities and performance when used as active materials, but also in the architecture of the detection schemes when used as structural/packing components. With a particular focus on optoelectronic, chemical and plasmonic components for sensing, we highlight that the new concept of having highly-integrated architectures through a system-engineering approach may enable the full expression of the potential of the sensing systems in real-setting applications in terms of fast-response, high sensitivity and multiplexity at low-cost and ease of portability.

Colorimetric determination of carbendazim based on the specific recognition of aptamer and the poly-diallyldimethylammonium chloride aggregation of gold nanoparticles

This paper proposes the idea of establishing carbendazim (CBZ) colorimetric determination in spiked water samples by specific aptamers of unlabeled carbendazim (CBZ), gold nanoparticles (AuNPs) and cationic polymer poly-diallyldimethylammonium chloride (PDDA). In the absence of CBZ, the CBZ aptamer will react with the cationic polymer PDDA by electrostatic interaction to form a complex structure. Therefore, the gold nanoparticles will remain dispersed due to the lack of PDDA. However, when CBZ is added into the sensory system, the CBZ-specific aptamer can selectively capture CBZ to form a stable complex structure. Due to the consumption of the aptamer, PDDA is unable to interact with the aptamer and begins to induce aggregation of AuNPs, thereby causing the color of the solution to change from red to blue. Colorimetric determination of CBZ based on the specific recognition of aptamer and the PDDA-induced aggregation of AuNPs has a detection limit of 2.2 nM, a linear range (R = 0.9960) from 2.2 to 500 nM. The method has good sensitivity and specificity, and the average recovery of CBZ is 94.9-104.8% in the application of actual water samples. This colorimetric method is simple, time-saving and low requirements for equipment, therefore, it holds great potential for CBZ detection in the environmental water samples.

Structural Insights on 2D Gadolinium Tungstate Nanoflake: A Promising Electrocatalyst for Sensor and Photocatalyst for the Degradation of Postharvest Fungicide (Carbendazim)

Gadolinium tungstate (Gd₂(WO₄)₃) has acquired much attention owing to its exclusive transport properties and excellent thermal and chemical stability. In this work, we demonstrate that two-dimensional (2D) gadolinium tungstate nanoflakes (GW Nfs) are synthesized by a coprecipitation method and represent novel architectures for efficient catalysis, which could be used in electrochemical sensing and photocatalytic degradation of the postharvest fungicide carbendazim (CBZ). The physicochemical properties of GW Nfs were studied by using XRD, Raman, TEM, EDX, and XPS, which show the formation of GW as a nanoflake-like structure with a well crystallized nature. The as-prepared GW Nfs revealed an admirable electrochemical response for CBZ detection with an LOD of 0.005 μM, a wide-ranging linear response of 0.02 to 40 μM, and a notable sensitivity of 0.39 μA μM^-1 cm^-2. Furthermore, the GW-Nf-modified electrode has a good recovery for CBZ in the study of real samples such as rice and soil washed water samples. Moreover, GW Nfs have a promising photocatalytic activity for CBZ degradation. The GW Nfs could degrade CBZ at greater than 98% efficiency and mineralize above 74% of the CBZ molecules in the presence of visible light irradiation with superior stability even after many cycles. Subsequently, the electrochemical and photocatalytic mechanisms were provided in detail.

A novel electrochemical sensor based on molecularly imprinted polymer modified hollow N, S-Mo2C/C spheres for highly sensitive and selective carbendazim determination

A novel electrochemical sensor based on nitrogen and sulfur doped hollow Mo₂C/C spheres (N, S-Mo₂C) and molecularly imprinted polymer (MIP) was proposed for carbendazim (CBD) determination. The N, S-Mo₂C were prepared by first nitrogen and sulfur doping via one-pot method and subsequent carbonization at high temperature. A film of MIP was then fabricated in situ on the N, S-Mo₂C surface by electropolymerization, with CBD acting as template molecule and o-phenylenediamine as functional monomer. The N, S-Mo₂C were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and electrochemical behaviors of CBD on differently modified electrodes were explored by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimal conditions, a calibration curve of current shift versus the logarithm of CBD concentration was obtained in the range of 1×10^-12 ∼ 8×10^-9 M with a detection limit of 6.7×10^-13 M (S/N=3). Moreover, the proposed sensor exhibited favorable stability and selectivity, and was applied to analyze pesticide residues in fruits and vegetables with decent accuracy.