Development of a modified QuEChERS method based on magnetic multiwalled carbon nanotubes for the simultaneous determination of veterinary drugs, pesticides and mycotoxins in eggs by UPLC-MS/MS

Medium entropy FeCoNi nanoalloy supported on reduced graphene oxide for efficient electrochemical detection of roxarsone in food samples

Herein, a novel FeCoNi(b)-800 ternary metal nanoalloy was uniformly mixed with reduced graphene oxide (RGO) to synthesize the FeCoNi(b)-800@RGO(2:1) composite. The addition of RGO not only stopped the accumulation of FeCoNi(b)-800 alloy, but also heightened the electrocatalytic activity of composite. Particularly, the FeCoNi(b)-800@RGO(2:1) composite displayed the significantly strong electrocatalytic capacity for the reduction of roxarsone (ROX). Furthermore, the FeCoNi(b)-800@RGO(2:1) composite possessed enough porosity and metal catalytic sites, facilitating the transport and electrochemical reduction of the ROX. Thus, the FeCoNi(b)-800@RGO(2:1) composite modified glassy carbon electrode (FeCoNi(b)-800@RGO(2:1)/GCE) showed the superb electrochemical detection effect for ROX with relatively wide working range (0.1-1500 μM) and low detection limit (0.013 μM). Importantly, the FeCoNi(b)-800@RGO(2:1)/GCE sensor could accurately determine the contents of ROX in actual pork, chicken, duck and egg samples, indicating that it had good suitability in food safety monitoring.

Advances in magnetic analytical extraction techniques for detecting antibiotic residues in edible samples

The widespread use of antibiotics in agricultural and animal husbandry to treat bacterial illnesses has resulted in a rise in antibiotic-resistant bacteria. These bacteria can grow when antibiotic residues are present in food items, especially in edible animal products. As a result, it is crucial to monitor and regulate the amounts of antibiotics in food. Magnetic analytical extractions (MAEs) have emerged as a potential approach for extracting antibiotic residues from food using magnetic nanoparticles (MNPs). Recent improvements in MAEs have resulted in the emergence of novel MNPs with better selectivity and sensitivity for the extraction of antibiotic residues from food samples. Consequently, this review paper addresses current developments in MAE for extracting antibiotic residues from edible samples. It also provides a critical analysis of contemporary MAE practices. The current issues and potential future developments in this field are also discussed, thereby providing a framework for future study paths.

Comprehensive assessment of clean-up strategies for optimizing an analytical multi-method to determine pesticides and mycotoxins in Brazilian medicinal herbs using QuEChERS-LC-TQ-MS/MS

The use of medicinal herbs has increased significantly. However, the presence of pesticide residues and mycotoxins in medicinal herbs has generated constant discussion and concern among regulatory agencies. Developing and validating an analytical method for determining pesticides and mycotoxins in medicinal plants is challenging due to the naturally occurring substances in these plants. The purpose of this work was to develop and to optimize a sensitive, accurate, precise, effective QuEChERS method for simultaneous determination of over 160 pesticide and mycotoxin residues in complex medicinal plant matrices using LC-TQ-MS/MS. A comprehensive comparison of clean-up procedures and other parameters was conducted to achieve this goal. The validation procedure was performed according to SANTE 11312/2021. More polar analytes, such as acephate, methamidophos and omethoate, presented a higher negative matrix effect in both Melissa officinalis L. and Malva sylvestris L. However, other molecules, such as spirodiclofen, showed a 24% signal enhancement in M. officinalis and a 46% signal suppression in M. sylvestris, indicating that a representative matrix-matched calibration would lead to inaccurate quantification of the analyte. Accuracy and precision were satisfactory according to SANTE 11312/2021 for 157 pesticide residues and mycotoxins in M. officinalis and for 152 molecules in M. sylvestris. LOQs at 10 µg kg-1 were achieved for 117 pesticides in M. officinalis and 99 pesticides in M. sylvestris. Among the mycotoxins, all four aflatoxins (B1, B2, G1 and G2) presented LOQs of 5 µg kg-1, and ochratoxin A had an LOQ of 10 µg kg-1 in M. officinalis. The same LOQ values were shown for these mycotoxins in M. sylvestris, except for aflatoxin B2 and ochratoxin A, which had LOQs of 20 µg kg-1. Moreover, in Southern Brazil, there has been no previous study on mycotoxin and pesticide contamination in medicinal herbs. Therefore, the application of this method was assessed through the analysis of forty-two real samples. Imidacloprid was found in M. officinalis, and methyl pirimiphos was found in M. sylvestris. The proposed method not only serves as a helpful tool for routine monitoring but also offers a basis for further research on risk assessment and control in food safety.

Trace analysis of 20 antihistamines in milk by ultrahigh performance liquid chromatography coupled with high field quadrupole orbitrap high resolution mass spectrometry followed dispersive micro solid phase extraction

Ultrahigh-performance liquid chromatography coupled with high-field quadrupole Orbitrap high resolution mass spectrometry was used for the separation and determination of 20 antihistamines, and a dispersive micro solid-phase extraction procedure using high-performance absorbing material was developed as a sample preparation strategy for extracting 20 antihistamines from milk. Instrument conditions and key parameters influencing extraction efficiency were investigated to obtain an optimized method. The limit of detection for 20 antihistamines in milk using this method is 0.05 µg/L to 1.0 µg/L. Recoveries are between 80.7 % and 108.3 %, and the relative standard deviation is less than 15 %. It is suitable for confirmatory monitoring and quantitative analysis of 20 antihistamines in milk. The results show that antihistamines in milk may be noteworthy issues for human health and environmental pollution.

Multivariate optimization and validation of 200 pesticide residues in the banana matrix by GC-MS/MS

GC-MS/MS has been observed from past studies to be an appropriate choice for designing a simple, efficient and sensitive analytical technique. Accordingly, the linearity and working range, Method Limit of Detection (MLOD), Method Limit of Quantification (MLOQ), accuracy, precision (intra-day and inter-day), Matrix Effect (ME) and selectivity were analyzed for the assessment of 200 pesticide residues [organophosphorus pesticides (OPP), organochlorine pesticides (OCP), organonitrogen pesticides (ONP), synthetic pyrethroid pesticides (SPP), and herbicide methyl esters (HME)] in the banana matrix. The procedure involved QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction and clean-up with Multi-Walled Carbon Nanotubes (MWCNTs) and Primary Secondary Amine (PSA) wherein the factors were optimized using the Plackett-Burman and central composite designs. The performance of the method in order to quantitate 200 pesticides at trace levels was evaluated by matrix-matched calibration. The linearity was observed to range from 1 to 100 μg L-1 with determination coefficient (r2) > 0.99. Recovery studies were conducted at 2 levels, 10 μg kg-1 and 25 μg kg-1, and the values obtained were in the range of 71-116% and 72-119%, respectively. The Relative Standard Deviation (RSD) was observed to be less than 20% in line with the recommended guidelines (SANTE/11312/2021). The MLOD and MLOQ were found to be in the range of 0.45-6.33 μg kg-1 and 1.44-9.59 μg kg-1 respectively. The developed method was applied satisfactorily to analyse banana samples cultivated in different regions of Gujarat, India.

Application of a multi-toxin detect method to analyze mycotoxins occurrence in plant-based beverages

In recent years, plant-based beverages have gained popularity on the market due to environmental and ethical concerns, as well as milk intolerances and allergies. However, raw materials employed in the manufacture of these products are susceptible to mycotoxin contamination. For this reason, a new method based on a QuEChERS extraction procedure followed by ultra-high performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS) detection was developed for the analysis of 29 mycotoxins in oat, rice, soy, and almond beverages. The method was validated in terms of linearity, detection and quantification limits, matrix effect, recoveries, accuracy and precision. Satisfactory performance characteristics were achieved, with recoveries above 70% for most mycotoxins. Several commercial samples were analyzed, aflatoxins were frequently detected in rice and almond beverages, while T-2 and HT-2 toxins were identified in oat-based products. In addition, emerging mycotoxins such as enniatins and beauvericin were detected in the four types of beverages.

Improved matrix purification using a graphene oxide-coated melamine sponge for UPLC-MS/MS-based determination of 37 veterinary drugs in milks

A rapid and highly sensitive method was established for the analysis of 37 veterinary drug residues in milk using a modified QuEChERS method based on a reduced graphene oxide-coated melamine sponge (rGO@MeS) coupled with UPLC-MS/MS. Under optimal chromatographic and mass spectrometric conditions, the effects of different dehydrated salts (MgSO4 and Na2SO4) and metal chelating agents (Na2EDTA) on extraction efficiency were first investigated. Next, the influence of a dynamic and static purification mode was evaluated in terms of drug recoveries. Calibration curves of 37 veterinary drugs were constructed in the range 0.6-500 μg kg-1, and good linearities were obtained with all determination coefficients (R2) ≥0.992. The limits of detection (LODs) and quantitation (LOQs) were in the range 0.3-1.1 μg kg-1 and 0.6-3.5 μg kg-1, respectively. The recoveries of all compounds were in the range 61.3-118.2% at three spiked levels (20, 100, and 200 μg kg-1) with RSDs ≤15.4% for both intra- and inter-day precisions. Compared to pristine melamine sponges and commercial adsorbents (C18, PSA, and GCB), rGO@MeS demonstrated an equal or even better purification performance in terms of recoveries, matrix effects, and matrix removal efficiency. This method is rapid, simple, efficient, and appropriate for the qualitative and quantitative analyses of 37 veterinary drug residues in milk, providing a new detection strategy and technical support for the routine analysis of animal-derived food.

Develop an external standard method for high-flux determination of veterinary drug residues liquid milk without solid phase extraction

To get rid of the singularity of the detection of veterinary drug residues in liquid milk, a high-throughput determination was developed for 126 VDRs in 17 categories in liquid milk based on the one-step extraction coupled with LC-HRMS (UPLC-Q-Exactive-Orbitrap-MS). The results showed that adding 2.5 mL of 0.1 mol/L Na2EDTA-McIlvaine in acetonitrile-methanol extractant (50:50, V/V) could effectively improve the response intensity of veterinary drug residues in liquid milk, reduce the matrix effect and eliminate the need for expensive SPE purification. The established external standard quantitative method has a LOD of 0.01-0.30 μg/L for all categories of veterinary drug residues, good linearity in the concentration range of LOQ of 0.03-1.00 μg/L, and correlation coefficients (r2) were all greater than 0.995. The spike recoveries at all three levels were between 80.30% and 119.95%. The positive detection rate of this method in 128 actual samples was 8.59%.

Magnetic mesoporous Fe3O4@nSiO2@mSiO2 nanoparticles for high-throughput mass spectrometry detection of hydrolyzed products of organophosphorus nerve agents

Rapid and accurate detection of hydrolyzed products of organophosphorus nerve agents (OPNAs) is an important method to effectively confirm the use of these agents. OPNAs are rapidly hydrolyzed to the methyl phosphonates (MPs) in the environment, which can be used as environmental traceability marker for OPNAs. Herein, magnetic mesoporous materials combined with real-time in situ mass spectrometry (MS) were used to achieve high-throughput detection of MPs. Novel magnetic mesoporous nanoparticles Fe3O4@nSiO2@mSiO2 were synthesized via co-condensation of tetraethyl orthosilicate and cetyltrimethylammonium bromide (CTAB) on the surface of nonporous silica-coated Fe3O4 under alkaline conditions. CTAB templates were removed by the reflux of ethanol (0.0375 mM ammonium nitrate) to form mesoporous SiO2, which has a large specific surface area of 549 m2 g-1 and an excellent magnetization strength of 59.6 emu g-1. A quick, cost-effective, rugged, and safe magnetic preparation method, magnetic QuEChERS, was established with magnetic mesoporous nanoparticles (Fe3O4@nSiO2@mSiO2) as adsorption materials for direct analysis in real-time and tandem MS (DART-MS/MS) of MPs in environmental samples. The method exhibits good linearity (R2 > 0.992) in the range of 20.0-4.00 μg mL-1, the limits of detection were <5.00 ng mL-1, the limits of quantification were <20.0 ng mL-1, and the extraction recoveries were 70.2-98.1%, with relative standard deviations (RSDs) in the range of 1.97-10.6%. Additionally, using this method, analysis of 70 environmental samples could be completed within 20 min. Then, the M-QuEChERS-DART-MS/MS method was applied to the 52nd Organisation for the Prohibition of Chemical Weapons (OPCW) environmental spiked samples analysis, where the accuracy was 95.2-116%, and the RSD was 1.16-7.83%. The results demonstrated that Fe3O4@nSiO2@mSiO2 based on the QuEChERS method can quickly and efficiently remove the matrix of environmental samples and when coupled with the DART-MS/MS can achieve high-throughput determination of MPs in environmental samples.

Magnetic porous carbon material derived from imine-linked covalent organic frameworks for magnetic solid phase extraction of trace chlorine-containing herbicides in soil

Here, imine-linked covalent organic frameworks coated Fe3O4 microspheres were fabricated and employed as the self-template to prepare magnetic porous carbon material. The magnetic solid phase extraction (MSPE) performance of such magnetic covalent organic frameworks derived porous carbons (CMCOFs) were studied for the first time, and the improved MSPE performance was verified. The variations of chemical and material properties in the carbonization processes were studied, and it was found that the CMCOFs carbonated at 400°C exhibited highest adsorption efficiencies for chlorine-containing herbicides due to the formation of nitrile components at this stage. The CMCOFs retained high adsorption efficiencies (above 90 %) to chlorine-containing herbicides at wide pH range (3-12) and high salt concentration. The CMCOFs-based MSPE coupled with HPLC technique was in good potential for analysis of trace chlorine-containing herbicides in soil samples. Under the optimized conditions, this approach displayed short extraction and elution time (5 and 8 min) and low limits of detection (0.35-5.5 ng/mL) for chlorine-containing herbicides. The recoveries of spiked analytes and the relative standard deviations in real soil samples were 81.86 %-110.9 % and less than 5.92 %, respectively. This study provides an efficient method for the analysis of trace chlorine-containing herbicides in complex samples, as well as give some inspiration on material modulation by controlled carbonization to achieve improved sorption performances.

Determination of multiclass contaminants in chilli powder based on magnetic multiwalled carbon nanotubes and UPLC-QTOF/MS

A multiclass analysis approach was developed using magnetic multiwalled carbon nanotubes sorbents and ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC-QTOF/MS) for the rapid screening and simultaneous determination of 216 contaminants including 15 mycotoxins, 9 synthetic colourants, and 192 pesticides in chilli powder. The sample preparation process was optimized. The optimal preparation procedure utilized NaCl and NaAc as the salting-out agents, and Fe3O4-MWCNTs as the sorbents, resulting in reduced chemical consumption, improved cleaning performance, and facilitated high-throughput analysis. The proposed method was validated, and satisfactory parameters were obtained. Approximately 85.6% of the target analytes exhibited a weak matrix effect, with the matrix effects falling within the range of 0.8 ∼ 1.2. The method demonstrated acceptable recoveries of the analytes, falling within the range of 62.14%∼119.76% at three fortified levels with relative standard deviations (RSDs) of less than 20%. Additionally, the method's limit of quantification (LOQ) ranged from ranged from 0.50 μg·kg-1 to 49.56 μg·kg-1. The method was further applied for analysis of 27 chilli powder samples, demonstrating its potential for screening and quantification of multiclass contaminants for spices.

Strategies to control mycotoxins and toxigenic fungi contamination by nano-semiconductor in food and agro-food: a review

Mycotoxins are toxic secondary metabolites generated from toxigenic fungi in the contaminated food and agro-food, which have been regarded as a serious threat to the food safety and human health. Therefore, the control of mycotoxins and toxigenic fungi contamination is of great significance and has attracted the increasing attention of researchers. As we know, nano-semiconductors have many unique properties such as large surface area, structural stability, good biocompatibility, excellent photoelectrical properties, and low cost, which have been developed and applied in many research fields. Recently, nano-semiconductors have also been promisingly applied in mitigating or controlling mycotoxins and toxigenic fungi contaminations in food and agro-food. In this review, the type, occurrence, and toxicity of main mycotoxins in food and agro-food were introduced. Then, a variety of strategies to mitigate the mycotoxin contamination based on nano-semiconductors involving mycotoxins detection, inhibition of toxigenic fungi, and mycotoxins degradation were summarized. Finally, the outlook, opportunities, and challenges have prospected in the future for the mitigation of mycotoxins and toxigenic fungi based on nano-semiconductors.

Mycotoxin Determination in Peaches and Peach Products with a Modified QuEChERS Extraction Procedure Coupled with UPLC-MS/MS Analysis

Peaches are the most significant temperate fruit crop worldwide. However, peach fruits are susceptible to fungal and mycotoxin contamination. Consequently, monitoring the residual levels of multiple mycotoxins in peaches and related products is essential. In this study, a novel method based on QuEChERS extraction, followed by ultra-high-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) detection, was developed for analyzing 14 mycotoxins in peaches and peach products from China. Matrix-matched calibrations were employed to accurately quantify the mycotoxins and compensate for matrix effects. Recoveries for the target analytes ranged from 84.6% to 117.6%, with intra-day and inter-day precision below 20%. The limits of quantification were 2 or 5 μg/L for the 14 mycotoxins. This method was utilized to detect the presence of target mycotoxins in 109 fresh peaches, 100 diseased peaches, and 89 peach products from China. Six mycotoxins were identified in the rotten parts of the diseased peaches, with concentrations ranging from 5.2 to 1664.3 µg/kg. In the remaining parts of the diseased peach samples, only two toxins, alternariol (AOH) and alternariol monomethyl ether (AME), were quantified at levels of 15.3 µg/kg and 15.5 µg/kg, respectively. No mycotoxins were detected in fresh peaches. For peach products, all contamination levels were below the quantitative limits and significantly lower than the maximum legal limits established for the products.

Recent advances of ratiometric sensors in food matrices: mycotoxins detection

The public health problem caused by mycotoxins contamination has received a great deal of attention worldwide. Mycotoxins produced by filamentous fungi widely distributed in foodstuffs can cause adverse impacts on humans and livestock, posing serious health threats. Particularly worth mentioning is that mycotoxins can accumulate in organisms and be enriched through the food chain. Improving early trace detection and control from the source is a more desirable approach than the contaminated food disposal process to ensure food safety. Conventional sensors are susceptible to interference from various components in intricate food matrices when detecting trace mycotoxins. The application of ratiometric sensors avoids signal fluctuations, and reduce background influences, which casts new light on developing sensors with superior performance. This work is the first to provide an overview of the recent progress of ratiometric sensors in the detection of mycotoxins in intricate food matrices, and highlight the output types of ratiometric signal with respect to accurate quantitative analysis. The prospects of this field are also included in this paper and are intended to have key ramifications on the development of sensing detection conducive to food safety.

Efficient detection of metronidazole by a glassy carbon electrode modified with a composite of a cyclotriveratrylene-based metal-organic framework and multi-walled carbon nanotubes

Constructing a sensitive and efficient sensor for determination of metronidazole (MNZ) is crucial in food field. Herein, a new cyclotriveratrylene-based metal-organic framework (MOF), namely, [Cd₆L₂(cyclen)₂(H₂O)₂] (1), was constructed by self-assembly of functionalized 5,6,12,13,19,20-hexacarboxy-propoxy-cyclotriveratrylene (H₆L), 1,4,7,10-tetraazacyclododecane (cyclen) and Cd(II) cation under solvothermal condition. In 1, adjacent Cd(II) cations are linked by L^6- to produce a 2D polymeric structure with carboxylate and phenolic oxygen atoms. To enhance conductivity of 1, it was combined with conducting carbon materials, including mesoporous carbon (MC), reduced graphene oxide (RGO) and multi-walled carbon nanotubes (MWCNT), respectively, producing a series of composite materials. Remarkably, electrochemical tests showed that 1@MWCNT(1:1) featured a much better electrochemical detection performance for metronidazole (MNZ) than 1@MC and 1@RGO. The linear range for the detection of MNZ is up to 0.4-500 μM and the limit of detection (LOD) for MNZ reached 0.25 μM. Importantly, the fabricated sensor 1@MWCNT(1:1) was employed for the detection of MNZ in honey and egg with satisfactory result. High-performance liquid chromatography (HPLC) validated the high accuracy of the electrochemical method for the determination of honey and egg.

Simultaneous microextraction of pesticides from wastewater using optimized μSPEed and μQuEChERS techniques for food contamination analysis

Food contamination with pesticides poses significant risks to consumer safety and undermines confidence in food supply chains. Detecting pesticides in food samples is a challenging task that requires efficient extraction techniques. This study aims to compare and validate two microextraction techniques, μSPEed and μQuEChERS-dSPE, for the simultaneous extraction of eight pesticides (paraquat, thiabendazole, asulam, picloram, ametryn, atrazine, linuron, and cymoxanil) from wastewater samples. A good analytical performance was obtained for both methodologies, with selectivity, linearity in the range 0.5-150 mg L^-1 with coefficients of determination up to 0.9979, limits of detection (LODs) and limits of quantification (LOQs) ranging from 0.02 to 0.05 mg L^-1 and from 0.06 to 0.17 mg L^-1, respectively, precision below 14.7 mg L^-1, and recoveries from wastewater samples in the range of 66.1-99.9%. The developed methodologies are simpler, faster, and require less sample and solvent volumes than conventional methodologies, having a lower impact on the environment. Nevertheless, the μSPEed approach was found to be more efficient, easier to perform, and with a higher greener profile. This study highlights the potential of microextraction techniques for the analysis of pesticide residues in food and environmental samples. Overall, it presents a fast and efficient method for the analysis of pesticides in wastewater samples, which can be useful for monitoring and controlling pesticide contamination in the environment.

Development of QuEChERS clean-up based on EMR-lipid for simultaneous analysis of 9 mycotoxins, acaylamide and 5-Hydroxymethylfurfural in biscuit by UHPLC-MS/MS

A robust and sensitive analytical method for the simultaneous determination of 9 mycotoxins, AA, and 5-HMF by UHPLC-MS/MS was developed. Clean-up of the extracts was achieved by d-SPE with EMR-lipid. A new column phase (C₁₈-PFP) was selected for HPLC separation after comparison with the C₁₈ column. Finally, the method gave good linear relations with regression coefficients R² > 0.99. The recovery of all the tested compounds was within the range of 70.67 to 104.88%, and the intraday and interday relative standard deviations (RSD) were lower than 12.49. The proposed method was then applied to investigate the mycotoxins, AA and 5-HMF in 20 food samples sold in the retail market. AA and 5-HMF were widely detected, and half of the samples were found to contain at least one mycotoxin contamination. Therefore, this method is potential to be used as a convenient and effective method for the cookies product quality control in the future.

Critical Evaluation of Two Qualitative Analytical Approaches for Multiclass Determination of Veterinary Drugs in Bovine Muscle Using UHPLC-Q-Orbitrap: The Wind of Change in Brazilian Monitoring

Food safety is recognized as a main requirement for consumers, food industries, and official laboratories. Here, we present the optimization and screening qualitative validation of two multianalyte methods in bovine muscle tissues by ultra-high-performance liquid chromatography coupled to high-resolution mass spectrometry with an Orbitrap-type analyzer, operated with a heated ionization source in positive and negative mode. This aims for not only the simultaneous detection of veterinary drugs regulated in Brazil but also the prospection of antimicrobials not yet monitored. Two different sample preparation procedures were applied: method A-generic solid-liquid extraction with 0.1% formic acid (v/v) in an aqueous solution of EDTA 0.1% (w/v)-acetonitrile-methanol (1:1:1, v/v/v), followed by an additional ultrasound-assisted extraction and method B-QuEChERS. In both procedures, selectivity showed satisfactory conformity. From a detection capability (CCβ) equivalent to ½ the maximum residue limit, >34% of the analyte resulted in a false positive rate of <5%, preponderant by the QuEChERS method, which exhibited a higher yield of the sample. The results showed the potential application of both procedures in the routine analysis of foods by official laboratories, enabling the expansion of this methodological portfolio as well as its analytical scopes, thus optimizing the control of residues of veterinary drugs in the country.

Screening and quantification of 146 veterinary drug residues in beef and chicken using QuEChERS combined with high performance liquid chromatography-quadrupole orbitrap mass spectrometry

This work aimed to develop an integrated high-throughput screening and quantification for multi-class veterinary drug residues by HPLC-Q-Orbitrap mass spectrometry. A qualitative screening mass database of 171 veterinary drugs was created using full scanning mode, which improved the screening accuracy and scope. Beef and chicken samples were chosen to validate the quantification method at three spiked concentration levels. The quantification method of 146 veterinary drug residues was developed. After enzymatic hydrolysis, beef and chicken samples were treated using optimized QuEChERS. The calibration curves showed good linearities with correlation coefficients of 0.9921-0.9994. The recovery rates were within 52.1-138.2 % with relative standard deviations 0.4-17.7 %. The limits of detection and limits of quantification were in the range of 0.15-3.03 μg/kg and 0.5-10 μg/kg, respectively. The proposed method was demonstrated to be reliable for the simultaneous analysis of multi-class veterinary drugs. It is of significance to expand the screening scope and quantitative analysis efficiency.

Fate and dietary risk assessment of pyriproxyfen, dinotefuran, and its metabolites residues in tomato across different regions in China

Registration of a new formulation called 30% suspension concentrate (30% SC, pyriproxyfen 10% + dinotefuran 20%) to inhibit the occurrence of whitefly in tomato is currently under review in China, so it is necessary to research the residue behavior and dietary risk of pyriproxyfen and dinotefuran in tomato under field conditions. According to Good Agricultural Practices (GAP), the formulation was sprayed once at the dosage of 112.5 g a.i./ha (active ingredient/hectare) at the initial stage of the occurrence of tomato whitefly and the recommended pre-harvest interval (PHI) for sampling was 5 days. Meanwhile, the residues of pyriproxyfen, dinotefuran, and the metabolites of dinotefuran in tomato samples were determined using QuEChERS (quick, easy, cheap, effective, rugged, and safe) and high-performance liquid chromatography-tandem mass spectrometry. The results showed that the terminal residue levels of the analytes detected in tomato samples were below 0.19 mg/kg for pyriproxyfen and 0.25 mg/kg for dinotefuran at the recommended PHI (5 days), which were lower than the maximum residue limits of China. The dietary risk assessment was also carried out based on field trial results, toxicological data, and Chinese dietary pattern. Both the chronic risk quotients (≤ 26.59%) and acute risk quotients (≤ 1.14%, general population, > 1 year) of pyriproxyfen and dinotefuran were far below 100%, indicating a low risk to consumers' health. The paper will be conducive to provide guidance for the rational application of these insecticides on tomato.

Development of a Modified QuEChERS Method Based on Magnetic Multi-Walled Carbon Nanotubes as a Clean-Up Adsorbent for the Analysis of Heterocyclic Aromatic Amines in Braised Sauce Beef

Heterocyclic aromatic amines (HAAs) generated during the cooking of meats cause adverse effects on human health. The purpose of the current research was to develop a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) method using magnetic multi-walled carbon nanotubes (Fe3O4-MWCNTs) as clean-up adsorbents for the rapid determination of HAAs in braised sauce beef. The significant parameters in extraction and clean-up processes were screened and optimized. Under optimal conditions, the LODs ranged from 3.0 ng/g to 4.2 ng/g. The recoveries (78.5−103.2%) and relative standard deviations RSDs (<4.6%) of five HAAs were obtained. These are in accordance with the validation criteria (recovery in the range of 70−120% with RSD less than 20%). Compared with conventional clean-up adsorbents (PSA or C18), Fe3O4-MWCNTs displayed equivalent or better matrix removal efficiency, while making the pretreatment process easier and more time-saving through magnetic separation. Less usage of adsorbent makes the method possess another advantage of being lower in cost per sample. The method developed was successfully applied to analyze real samples collected from local deli counters, demonstrating Fe3O4-MWCNTs could be considered as an effective alternative adsorbent with great potential in the QuEChERS process.

Advances in functional photonic crystal materials for the analysis of chemical hazards in food

Chemical contaminants in food generally include natural toxins (mycotoxins, animal toxins, and phytotoxins), pesticides, veterinary drugs, environmental pollutants, heavy metals, and illegal additives. Developing a low-cost, simple, and rapid detection technology for harmful substances in food is urgently needed. Analytical methods based on different advanced materials have been developed into rapid detection methods for food samples. In particular, photonic crystal (PC) materials have a unique surface periodic structure, structural color, a large surface area, easy integration with photoelectronic and magnetic devices which have great advantages in the development of rapid, low-cost, and highly sensitive analytical methods. This review focuses on the PC materials in the view of their fabrication processes, functionalized recognition components for the specific recognition of hazardous substances, and applications in the separation, enrichment, and detection of chemical hazards in real samples. Suspension array based on three-dimensional PC microspheres by droplet-based microfluidic assembly is a great promising and powerful platform for food safety detection fields. For the PCs selective analysis, biological antibodies, aptamers, and molecularly imprinted polymers (MIPs) could be modified for specific recognition of target substances, particularly MIPs because of their low-cost and easy mass production. Based on these functional PCs, various toxic and hazardous substances can be selectively enriched or recognized in real samples and further quantified in combination of liquid chromatography method or optical detection methods including fluorescence, chemiluminescence, and Raman spectroscopy.

Determination of Cyclaniliprole in Fruits and Vegetables Using Disposable Pipette Extraction Cleanup and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

Despite an outstanding agent for control of Lepidoptera, the diamide insecticide cyclaniliprole (CYCP) is a suspected carcinogen. In the present study, an analytical method was developed for the determination of CYCP in six fruits and vegetables (apple, grape, peach, bell pepper, lettuce, and tomato) using ultrahigh-performance liquid chromatography coupled with tandem mass spectrometry. Sample preparation was carried out by the acetonitrile-salting-out extraction followed by simple and fast cleanup of disposable pipette extraction tip containing styrene divinyl benzene and/or graphitized carbon black. Satisfactory linearity (r > 0.99) was obtained in the calibration range of 0.001−1 µg mL−1. Matrix effects decreased from −9.9−−17.9% to −1.0−−7.6% after the cleanup. The recoveries of CYCP at three spike levels (0.01, 0.1, and 1 mg kg−1) from different matrices were between 75.7% and 111.5%, with the intra-day (n = 5) and inter-day (n = 15) relative standard deviations lower than 12.1%. The limit of quantification was 0.01 mg kg−1. The developed method provides a good reference for routine monitoring of CYCP in these fruits and vegetables.

Simultaneous determination of twelve mycotoxins in edible oil, soy sauce and bean sauce by PRiME HLB solid phase extraction combined with HPLC-Orbitrap HRMS

A solid phase extraction-high-performance liquid chromatography-tandem Orbitrap high resolution mass spectrometry (HPLC-Orbitrap HRMS) method was established for the determination of 12 mycotoxins (ochratoxin A, ochratoxin B, aflatoxin B1, aflatoxin B2, aflatoxin G1, aflatoxin G2, HT-2 toxin, sterigmatocystin, diacetoxysciroenol, penicillic acid, mycophenolic acid, and citreoviridin) in edible oil, soy sauce, and bean sauce. Samples were extracted by 80:20 (v:v) acetonitrile-water solution, purified by PRiME HLB column, separated by aQ C18 column with mobile phase consisting of 0.5 mmol/L ammonium acetate-0.1% formic acid aqueous solution and methanol. The results showed that the limits of detection (LODs) and limits of quantification (LOQs) of 12 mycotoxins were 0.12–1.2 μg/L and 0.40–4.0 μg/L, respectively. The determination coefficients of 12 mycotoxins in the range of 0.20–100 μg/L were &gt; 0.998. The average recoveries in soy sauce and bean sauce were 78.4–106.8%, and the relative standard deviations (RSDs) were 1.2–9.7% under three levels, including LOQ, 2× LOQ and 10 × LOQ. The average recoveries in edible oil were 78.3–115.6%, and the precision RSD (n = 6) was 0.9–8.6%. A total of 24 edible oils, soy sauce and bean sauce samples were analyzed by this method. AFB1, AFB2, sterigmatocystin and mycophenolic acid were detected in several samples at concentrations ranging from 1.0 to 22.1 μg/kg. The method is simple, sensitive, and rapid and can be used for screening and quantitative analysis of mycotoxin contamination in edible oil, soy sauce, and bean sauce.

Multi-residue methodology for quantification of antiparasitics in hen eggs by LC-MS/MS: development, validation and application to 348 samples from Brazil

Analytical methodology for quantification of 15 antiparasitic drugs and their respective metabolites in laying hen eggs was optimized and validated. The method uses acetonitrile as solvent extraction, sodium chloride for salting-out, low-temperature purification and analysis by LC-MS/MS. A total of 348 egg samples were collected in 11 states of Brazil and 50% of the total samples presented antiparasitic residues, which were albendazole, fipronil, fenbendazole, ivermectin, oxibendazole and mebendazole. A total of 12.4% of the samples were considered non-compliant, and residues quantified in these samples were albendazole, fipronil, and mebendazole. Albendazole was always identified as albendazole sulfone. Only one sample presented fipronil and fipronil sulfone; all others exclusively the sulfone metabolite. Fenbendazole was characterized by the presence of both metabolites: sulfone and sulfoxide. Maximum limits adopted are based on the Normative Instruction 51/2019 of the Brazilian Health Regulatory Agency (ANVISA), but albendazole, fipronil, oxibendazole, ivermectin, and mebendazole do not have their maximum residue level established. In addition, metabolites of albendazole, fipronil and fenbendazole in eggs are not considered in this Instruction.

Development of a Quantitative Method for Detection of Multiclass Veterinary Drugs in Feed Using Modified QuPPe Extraction and LC–MS/MS

A method was developed for the rapid and quantitative analysis of 30 veterinary drugs belonging to 17 classes (amphenicols (1), anthelmintics (1), cephalosporins (4), coccidiostats (1), lincosamides (1), macrolide (1), nitroimidazole (1), penicillins (3), phenylhydrazines (1), polypeptides (1), pyrethrins (1), quinolones (5), sulfonamides (3), tetracycline (3), neuroleptic agents (1), triazene trypanocidal agents (1), other. (1)) in feeds. The proposed method with a modified Quick Polar Pesticides (QuPPe) sample preparation was validated for the determination of 30 veterinary drugs in feed samples by liquid chromatography triple-quadrupole mass spectrometry (LC–MS/MS). The sample was extracted with methanol containing 1% acetic acid and purified by dispersive solid-phase extraction (d-SPE) with C18. Good linearity (r² ≥ 0.98) was observed, and the LOQ values ranged from 10 to 200 µg/kg. Average recoveries ranged from 70.8 to 118.4%, and the relative standard deviation was ≤ 18.7%. This validated method was used in the determination of 30 veterinary drugs in 142 feed samples obtained from South Korea. The results show that lincomycin was present in only one of the tested feed samples, although it was detected at a value lower than the LOQ. In conclusion, this multi-residue method can be used for screening through the detection and quantitation of residual multiclass veterinary drugs in feed samples.

Development of a Linear Immobilization Carrier-Based Immunoassay for Aflatoxin

We explored the feasibility of developing immunoassay technology with a linear carrier, to develop a simpler and cheaper rapid immunoassay technology. We selected aflatoxins as an example for research, as they are a group of highly toxic and carcinogenic compounds representing a worldwide threat to human health and life. With a non-competitive immunoassay, we detected and evaluated the effect of 28 different linear materials on antibody immobilization. Mercerized cotton and Dyneema line were chosen from the linear materials for further comparison using a competitive immunoassay, because both showed high-signal values and relatively low background noise. The results showed the sensitive IC₅₀ of mercerized cotton as the reaction carrier was 0.33 ng/mL, and the linear range was 0.16~3.25 ng/mL. The sensitivity using Dyneema line as the reaction carrier was 1.16 ng/mL. The competitive curves of four sample matrices were established to evaluate the stability of the detection system; these were basically consistent with those without sample matrices. In conclusion, both mercerized cotton and Dyneema, will be suggested for the novel development of linear immobilization carrier-based immunoassays for other analytes, and especially to construct inexpensive and easy-to-obtain biological and environmental analytical technologies and biosensors.

Simultaneous determination of pyflubumide and its metabolite in vegetables and fruits by ultrahigh performance liquid chromatography-tandem mass spectrometry

A rapid and cost-effective analytical method based on ultrahigh-performance liquid chromatography-tandem mass spectrometry was designed and verified for simultaneously monitoring the novel acaricide pyflubumide and its metabolite (pyflubumide-des(2-methyl-1oxopropyl)) in vegetables and fruits. After the extraction with acetonitrile, the samples were purified by dispersive solid phase extraction with multi-walled carbon nanotubes. Detection of the two target analytes was achieved within 3.0 min using a positive electrospray ionization mode. The average recovery, intra-day precision and inter-day precision of the two analytes at three spiked levels (2, 20 and 100 μg/kg) were 75.0%-101.0%, 0.4%-4.4% and 0.6%-5.3%, respectively. The limit of quantification of two compounds was 2 μg/kg, which was far below the maximum residue limits of pyflubumide in foods established by Japan and South Korea. Finally, the concentrations of pyflubumide and its metabolite in the samples were 16.6 and 7.8 μg/kg respectively, which verified the practicability and reliability of the method. The method was used to efficiently detect pyflumide and its metabolite in real samples, and was confirmed to be robust and effective for routinely analyzing both pyflubumide and its metabolite in vegetable and fruit samples. This article is protected by copyright. All rights reserved.

Toxicity assessment and microbial response to soil antibiotic exposure: differences between individual and mixed antibiotics

Increasing amounts of antibiotics are introduced into soils, raising great concerns on their ecotoxicological impacts on the soil environment. This work investigated the individual and joint toxicity of three antibiotics, tetracycline (TC), sulfonamide (SD) and erythromycin (EM) via a whole-cell bioreporter assay. TC, SD and EM in aqueous solution demonstrated cytotoxicity, whilst soil exposure showed genotoxicity, indicating that soil particles possibly affected the bioavailability of antibiotics. Toxicity of soils exposed to TC, SD and EM changed over time, demonstrating cytotoxic effects within 14-d exposure and genotoxic effects after 30 days. Joint toxicity of TC, SD and EM in soils instead showed cytotoxicity, suggesting a synergetic effect. High-throughput sequencing suggested that the soil microbial response to individual antibiotics and their mixtures showed a different pattern. Soil microbial community composition was more sensitive to TC, in which the abundance of Pseudomonas, Pirellula, Subdivision3_genera_incertae_sedis and Gemmata varied significantly. Microbial community functions were significantly shifted by EM amendments, including signal transduction mechanisms, cytoskeleton, cell wall/membrane/envelope biogenesis, transcription, chromatin structure and dynamics, and carbohydrate transport and metabolism. This work contributes to a better understanding of the ecological effects and potential risks of individual and joint antibiotics on the soil environment.

A porous boron nitride nanorods-based QuEChERS analysis method for detection of five neonicotinoid pesticide residues in goji berries

To accurately determine neonicotinoid pesticide residues in goji berries, porous boron nitride nanorods (p-BNNRs) were prepared and used as a new QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) clean-up sorbent. Combined with ultrahigh-pressure liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), a modified QuEChERS method was developed to determine five neonicotinoid pesticide residues in goji berries. In goji berries, the p-BNNRs were shown to have a greater clean-up ability than typical clean-up materials (C18, PSA) The recoveries of the five targets ranged from 78.1 to 117.3% at three fortified levels, and the LODs ranged from 2.2 to 3.7 μg kg^-1. The results indicate that this approach could be successfully used to quickly determine of the five neonicotinoid insecticide residues in goji berries for risk assessment purposes, demonstrating the applicability and suitability of p-BNNRs for the routine evaluation of neonicotinoid insecticide residues in goji berries.

A REVIEW ON DETERMINATION OF THE VETERINARY DRUG RESIDUES IN FOOD PRODUCTS

In this paper, we discuss veterinary medicine and its applications in the food field as well as its risk to the health of humans and animals by the residues. We review how the veterinary residues enter and cause some detrimental effects. We also mention two techniques to determine the residue of veterinary medication that existed in food originating from animals, including classic and advanced techniques. Finally, we discuss the potential of various developed methods compared to some traditional techniques.

Application of silanized melamine sponges in matrix purification for rapid multi-residue analysis of veterinary drugs in eggs by UPLC-MS/MS

Fast and convenient matrix purification is an important prerequisite for high-throughput analysis of drug multiresidues in food. In this study, a silanized melamine sponge was prepared and first applied in the rapid determination of multiclass veterinary drugs in eggs by ultrahigh-performance liquid chromatography-tandem mass spectrometry. Within five seconds, fast, convenient and efficient matrix separation could be achieved through simple soaking and squeezing. Compared to other matrix adsorbents, the developed material demonstrated equivalent or better purification performance. Good validation results were obtained in terms of drug recoveries (61.5%~97.0%, relative standard deviation (RSD) ≤ 10.8%), and linearities (R² ≥ 0.999), as well as low limits of quantitation (0.3 ~ 10.9 μg·kg^-1) and detection (0.1 ~ 3.8 μg·kg^-1). By analyzing 52 egg samples, high concentrations of ofloxacin, trimethoprim, metronidazole, and dimetridazole were found at 542.9, 121.2, 66.1 and 58.0 μg·kg^-1, respectively. The silanized melamine sponge has shown its great potential for rapid analysis of multiclass residues in food safety.

Integrated QuEChERS strategy for high-throughput multi-pesticide residues analysis of vegetables

An integrated QuEChERS strategy was developed by combining the extraction and purification processes into a single step. All of the pretreatment procedures could be performed in one tube within 5 min with the aid of magnetic nanoparticles and careful optimization of the key parameters, including the dosages of the sorbents (magnetic nanoparticles, C18, and graphitized carbon black), dehydrating and salting out reagents. The optimal method was validated and compared with the conventional QuEChERS method, demonstrating its clear superiority in terms of operating procedure, sample pretreatment time, and reagent dosages while affording equivalent pesticide recoveries and matrix effects. Further application of this method was performed to analyze 127 pesticide residues in solanaceous vegetables (tomato, pepper, and eggplant), leafy vegetables (brassica campestris and cabbage), legumes (green beans and cowpea), melon-type vegetables (cucumber and towel gourd), and a root vegetable (water bamboo), with the mean recoveries of the pesticides in the individual vegetable samples ranging from 70.6 to 92.8%. The method LOQs for these pesticides ranged from 10 to 50 μg/kg depending on the matrix. These results fully confirmed its wide applicability and versatility for achieving robust, rapid, and high-throughput multi-pesticide residues analysis in vegetable samples. More importantly, the developed strategy provides a greener and more "QuEChERS" design concept, which could be applied to the analysis of numerous types of pesticide residues in various matrices.

A global systematic review and meta-analysis of concentration and prevalence of mycotoxins in birds' egg

In the current study, the concentration and prevalence of birds' egg's mycotoxins among 11 articles (66 studies) based on countries, part of eggs, and type of mycotoxins subgroups were meta-analyses using a random-effect model. The order of mycotoxin according to concentration of mycotoxin was Deoxynivalenol (20.083 μg/kg) > Zearalenone (2.065 μg/kg) > Enniatin (1.120 μg/kg) > Total aflatoxin (0.371 μg/kg) > Beauvericin (0.223 μg/kg) > Ochratoxins (0.087 μg/kg) > Citrinin (0.010 μg/kg). Further, the mycotoxins' concentration in the yolk part (2.070 μg/kg) was higher than the mixed eggs (0.283 μg/kg). The rank order of mycotoxin based on country was China (14.990 μg/kg) > Cameroon (7.594 μg/kg) > Thailand (1.870 μg/kg) > Finland (0.920 μg/kg) > Iran (0.312 μg/kg) > Jordan (0.202 μg/kg) > Belgium (0.183 μg/kg) > Spain ( South Korea ( DON (85.00%) > AFT (20.15%) > OT (16.00%). The overall prevalence of mycotoxin was equal to 29.65%. Also, the concentration of mycotoxins in China and Cameroon was higher than in other countries. Therefore, the monitoring programs to reduce mycotoxins in bird eggs consumed in some countries such as China and Cameroon should be considered.

Trace analysis and identification of 33 sulfonamides and sulfonamide potentiators in eggs by ultrahigh-performance liquid chromatography coupled with quadrupole-high-field orbitrap high-resolution mass spectrometry

A method was established for the simultaneous trace analysis and identification of 27 sulfonamides and 6 sulfonamide potentiators in eggs by ultrahigh-performance liquid chromatography coupled with quadrupole-high-field orbitrap high-resolution mass spectrometry and multifunction impurity adsorption cleaning. The appropriate extraction, purification, and instrument conditions were optimized. The drugs were extracted by acetonitrile with 1% formic acid and purified with optimized adsorption material based on multifunction impurity adsorption cleaning. The elution was evaporated by nitrogen blowing, dissolved, and then assayed. The limits of detection were 0.01-0.28 μg kg^-1 for all drugs, while the recoveries were 82.4-110.6%, the relative standard deviations were 2.5-14.9%, and the linearity of the drugs in the corresponding concentration range was greater than 0.995. The proposed method was successfully applied for the monitoring of sulfonamides and their potentiators in egg samples, whereby 4 sulfonamides and 3 sulfonamide potentiators were detected in 200 egg samples.

Survey on Antibiotic Residues in Egg Samples in Italy

The presence of antibiotic residue in eggs is a current issue due to the increasingly important phenomenon of antibiotic resistance. A multiclass, confirmatory method for the determination of seventy-three antimicrobial agents (amphenicols, cephalosporins, diaminopyrimidines, lincosamides, macrolides, penicillins, pleuromutilins, quinolones, sulfonamides, and tetracyclines) with liquid chromatography high-resolution mass spectrometry was applied to 200 egg samples collected from 119 Italian farms during the years 2018–2021.

Determination of Six Eugenol Residues in Aquatic Products by Gas Chromatography-Orbitrap Mass Spectrometry

Eugenol compounds are widely used in the circulation and transportation of fresh aquatic products because of their good anesthetic effects. However, some studies have shown that eugenol compounds are potential carcinogens. Therefore, in order to ensure the edible safety of aquatic products, eugenol compounds in aquatic products need to be screened quickly. A method for determination of six eugenol residues in aquatic products was established by multiplug filtration cleanup (m-PFC), combined with gas chromatography-Orbitrap mass spectrometry (Orbitrap GC-MS). Samples were ultrasonically extracted with acetonitrile, and the extracts were frozen at −18°C for 1 h, then purified with the m-PFC column, and detected by Orbitrap GC-MS in full scan mode. The results showed the linear relationships for six eugenols were good in the range of 0.001–0.1 μg/mL, and the correlation coefficients (R2) were above 0.9950. The limits of detection (LODs) were 2–10 μg/kg, and the limits of quantitation (LOQs) were 5–20 μg/kg. The average recoveries at the spiked levels of 5–200 μg/kg were in the range of 76.4%–105.1%, with relative standard deviations (RSDs) of 1.2%–7.5%. Eighty aquatic products were detected by this method, of which only eugenol was detected in 12 samples, and eugenol and isoeugenol were detected in two samples at the same time. The other eugenol compounds were not detected in any sample. The detection rate of positive samples was 17.5%. The method is simple, accurate, and suitable for the rapid screening of eugenol compounds in aquatic products.

Prevalence, level and health risk assessment of mycotoxins in the fried poultry eggs from Jordan

In the current study, level and prevalence of deoxynivalenol (DON), aflatoxin B1 (AFB1), zearalenone (ZEN), and ochratoxin A (OTA) in fried poultry eggs in Jordan was investigated. Poultry egg samples (n = 250) were collected from March to September 2017. The level of DON, AFB1, ZEN and OTA in the white and yolk of poultry eggs was measured using LC-MS-MS. The health risk assessment was calculated using Margin of Exposures (MOEs) for AFB1 and OTA and hazard index (HI) for ZEN and DON. The highest prevalence in yolk and white of eggs was related to ZEN (96.56 %) and OTA (97.44 %), respectively. Also, the highest level in white and yolk was related to DON (1.07 μg/kg) and DON (1.65 μg/kg), respectively. Level of DON in the yolk of eggs was significantly higher than white of eggs (P-value < 0.05). Risk assessment indicated that exposed population are at high risk of AFB1 (MOEs < 10,000) in fried poultry eggs.