Carbon cloth-supported nanorod-like conductive Ni/Co bimetal MOF: A stable and high-performance enzyme-free electrochemical sensor for determination of glucose in serum and beverage

Incorporation of laser-induced graphene with hierarchical NiCo layered double hydroxide nanosheets for electrochemical determination of glucose in food and serum

Dependable and sensitive glucose (Glu) testing in foodstuff and blood serum is highly desirable to prevent and treat diabetes. Electrochemical quantification of Glu has attracted great interests due to the advantages, including simple operation, higher sensitivity, easy miniaturization, ease of on-site and wearable detection as well as fast response. High costs and environmental dependence of enzymes pose a challenge to the electrochemical enzymatic biosensors. Nonenzymatic electrochemical Glu sensors are urgently needed to aid the Glu detection in human serum and food samples. To fabricate flexible Glu electrochemical sensors, designing suitable electrode substrate and efficient electrocatalyst is of paramount significance. Herein, the porous patterned laser-induced graphene (LIG) was fabricated on polyimide substrates through an efficient laser-inducing technology, and then used directly as the electrode substrate. Electrochemical deposition of NiCo layered double hydroxide (LDH) nanoflakes on the LIG surface was then conducted to achieve NiCo-LDH/LIG electrode as a Glu sensor. Under optimal conditions, this sensor displays a low detection limit of 0.05 μM. Two sets of broad detection linear ranges were found to be from 0.5 to 270 μM and from 0.27 to 3.6 mM, with high sensitivities of 9.750 μA μM-1 cm-2 and 3.760 μA μM-1 cm-2, respectively. The enhanced performance was ascribed to the cooperative action of NiCo-LDH and LIG, in which porous LIG provides extraordinary electroconductibility and a high surface area, while NiCo-LDH offers numerous exposed active sites and outstanding electrocatalytic performance. Practical application was further verified during the Glu detection in human serum and food samples. This research confirms that the NiCo-LDH/LIG composite is a prospective electrode for high-performance Glu sensor and provides a way of developing nonenzymatic electrochemical sensors to analyze the Glu in human serum and food samples, opening new avenues in electrochemical sensing.

Emerging Nano/Microporous Architectures for Food Hazards: New Strategies for Precise Inspection and New Principles for Controllable Regulation

The big progress of materials science along with chemical engineering and biotechnology has significantly promoted interdisciplinary development, achieving advanced analytical methodologies, improved inspection performance, as well as promising regulation principles for food safety. The very recent progress on nano/microporous architectures for agri-food science, including new strategies for precise inspection and new principles for controllable regulation of food hazards, are summarized and discussed. Major attention is paid to the newly emerged porous architectures with their derivative nano/microstructures contributing to food safety through their instinctive advantages including special material surface, extraordinary porous structure, ease-of-modification, and excellent diversity and variability. This review clearly and logically displays the research road maps and development trends for current food safety issues and give suggestive directions for future outlook as well as the bottleneck problems to be solved, not only smart inspection and analysis but also elimination and control of ever-emerging food hazards.

Electrocatalysis in MOF Films for Flexible Electrochemical Sensing: A Comprehensive Review

Flexible electrochemical sensors can adhere to any bendable surface with conformal contact, enabling continuous data monitoring without compromising the surface's dynamics. Among various materials that have been explored for flexible electronics, metal-organic frameworks (MOFs) exhibit dynamic responses to physical and chemical signals, offering new opportunities for flexible electrochemical sensing technologies. This review aims to explore the role of electrocatalysis in MOF films specifically designed for flexible electrochemical sensing applications, with a focus on their design, fabrication techniques, and applications. We systematically categorize the design and fabrication techniques used in preparing MOF films, including in situ growth, layer-by-layer assembly, and polymer-assisted strategies. The implications of MOF-based flexible electrochemical sensors are examined in the context of wearable devices, environmental monitoring, and healthcare diagnostics. Future research is anticipated to shift from traditional microcrystalline powder synthesis to MOF thin-film deposition, which is expected to not only enhance the performance of MOFs in flexible electronics but also improve sensing efficiency and reliability, paving the way for more robust and versatile sensor technologies.

Two-Dimensional Nanorod-Shaped Co(II) Coordination Polymer on Three-Dimensional Metallic Foam: A Hybrid Platform for Electrochemical Oxidation of Glucose

This study unveils a novel electrochemical biosensor for monitoring glucose in biological fluids by employing nanorods of a cobalt-bispyridyl/dicarboxylate framework grown in a layer-by-layer manner on a highly porous nickel substrate. The hybrid microporous system has a bicatalytic effect on glucose oxidation due to the synergistic catalytic impact of the nickel and cobalt ions with varying oxidation states as electroactive sites. In addition, the controlled growth of inorganic-organic frameworks changes the mechanism of electron transfer from a diffusion-controlled process to an adsorption-controlled process, thus yielding a low onset oxidation potential (∼0.21 V/Ag-AgCl) and a high current intensity (∼1 mA) for the oxidation of glucose in alkaline media. A fast response time (∼2 s) and a reasonably high sensitivity (0.14 μA μM-1) within a broad linear range (40-360 μM) have determined the suitability and superiority of the hybrid electrode for glucose monitoring compared to many metal-organic-based biosensors. The facile fabrication process of the Co(II) coordination polymer/Ni substrate with a large surface area that benefits from the synergetic catalytic activity of nickel-cobalt hybrids may pave the way for the development of novel hybrid electrodes for biosensors and direct glucose fuel cells.

In situ fast self-assembled preparation of dandelion-like Cu(OH)2@Cu3(HHTP)2 with core-shell heterostructure arrays for electrochemical sensing of formaldehyde in food samples

Formaldehyde is known to harm the respiratory, nervous, and digestive systems of people. In this paper, a novel dandelion-like electrocatalyst with core-shell heterostructure arrays were fast self-assembled prepared in situ using copper foam (CF) as support substrate and 2,3,6,7,10,11 hexahydroxy-triphenyl (HHTP) as ligand (Cu(OH)2@Cu3(HHTP)2/CF) by a simple two-step hydrothermal reaction. The 1D Cu(OH)2 nanorods "core" and the 2D π-conjugated conducting metal-organic frameworks (Cu3(HHTP)2cMOF) "shell" with remote delocalized electrons give the dandelion-like heterogeneous catalysts excellent electrochemical activity such as a large specific surface area, high conductivity and a fast electron transfer rate. The Cu(OH)2@Cu3(HHTP)2/CF exhibited excellent electrocatalytic performance for formaldehyde under alkaline conditions with a linear range of 0.2 μmol/L - 125 μmol/L and 125 μmol/L - 8 mmol/L, a detection limit as low as 15.9 nmol/L (S/N = 3), as well as good accuracy, consistency, and durability, and it effectively identified FA in food.

Shifting paradigm in electrochemical biosensing matrices comprising metal organic frameworks and their composites in disease diagnosis

Metal Organic Frameworks (MOFs) are an evolving category of crystalline microporous materials that have grabbed the research interest for quite some time due to their admirable physio-chemical properties and easy fabrication methods. Their enormous surface area can be a working ground for innumerable molecular adhesions and site for potential sensor matrices. They have been explored in the last decade for incorporation in electrochemical sensor matrices as diagnostic solutions for a plethora of diseases. This review emphasizes on some of the recent advancements in the area of MOF-based electrochemical biosensors with focus on various important diseases and their significance in upgrading the sensor performance. It summarizes MOF-based biosensors for monitoring biomarkers relevant to diabetes, viral and bacterial sepsis infections, neurological disorders, cardiovascular diseases, and cancer in a wide range of real matrices. The discussion has been supplemented with extensive tables elaborating recent trends in the field of MOF-composite probe fabrication strategies with their respective sensing parameters. The article sums up the future scope of these materials in the field of biosensors and enlightens the reader with recent trends for future research scope. This article is categorized under: Diagnostic Tools > Biosensing Diagnostic Tools > Diagnostic Nanodevices.

Streamlined synthesis of superstructure Ni-benzimidazole MOFs: Glucose electrochemical analysis

The design and synthesis of efficient electrochemical sensors are crucial transformation technologies in electrochemistry. We successfully synthesize a three-dimensional Ni-metal-organic framework (MOF) nanostructured material with a superior architecture using benzimidazole and nickel nitrate as precursors at room temperature which is being applied in glucose electrochemical sensors. The reaction mechanism of M-6 during glucose detection is thoroughly studied using various characterization techniques, such as in situ Raman spectroscopy, in situ ultraviolet-visible spectrophotometry, synchrotron radiography, X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy. The research findings demonstrate that the M-6 material exhibits high sensitivity for glucose detection, with a sensitivity of 2199.88 mA M-1 cm-2. This study provides an important reference for designing more efficient electrochemical reaction systems and optimizing material performance. Furthermore, the superstructural design offers new ideas and possibilities for the development and application of similar materials.

In Situ Measurement of Urea Concentration With an In-Fiber SPR-MZI Sensor

A fiber-optic urea sensor based on surface plasmon resonance (SPR) and Mach-Zehnder interference (MZI) combined principle was designed and implemented. By plating gold film on the single-mode-no-core-thin-core-single-mode fiber structure, we successfully excited both SPR and MZI, and constructed two parallel detection channels for simultaneously measurement of urea concentration and temperature. Urease was immobilized on the gold film by metal-organic zeolite skeleton (ZIF-8), which can not only fix a large number of urease to improve measurement sensitivity of urea, but also protect urease activity to ensure the sensor stability. Experimental results indicate that the designed urea sensor with temperature compensation function can detect urea solution with concentration of 1-9 mM, and the sensitivity is 1.4 nm/mM. The proposed measurement method provides a new choice for monitoring urea concentration in the field of medical diagnosis and human health monitoring.

Conductive Metal-Organic Framework Grown on the Nickel-Based Hydroxide to Realize High-Performance Electrochemical Glucose Sensing

Glucose holds significant importance in disease diagnosis as well as beverage quality monitoring. The high-efficiency electrochemical sensor plays a crucial role in the electrochemical conversion technology. Ni(OH)2 nanosheets are provided with high specific surface area and redox activity that are widely used in electrochemistry. Conductive metal-organic frameworks (cMOFs) perfectly combine the structural controllability of organic materials with the long-range ordering of inorganic materials that possess the characteristic of high electron mobility. Based on the above considerations, the combination of Ni(OH)2 and Ni-HHTP (HHTP=2,3,6,7,10,11-hexahydroxytriphenylene) as an electrode modification material is designed to enhance electrochemical performance. In this work, to improve glucose detection, a sequence of Ni(OH)2@NiCo-HHTP and NiM-LDH@Ni-HHTP (M=Co2+, Mn2+, Cu2+, LDH=layered double hydroxide) are successfully synthesised by doping metals into Ni-HHTP and Ni(OH)2, respectively. As a result, NiCu-LDH@Ni-HHTP showed the best excellent glucose detection sensitivity.

Recent advance of nanomaterials modified electrochemical sensors in the detection of heavy metal ions in food and water

As one of the main pollutants, heavy metal ions can accumulate in the human body and cause a cascade of damage. Electrochemical sensors provide great prospects for tracing heavy metal ions because of their properties of high sensitivity, low detection limits and fast response. Electrode surface modification materials play a key role in enhancing the performance of electrochemical sensors. Herein, we summarize in detail the recent work on electrochemical sensors modified by carbon nanomaterials (graphene and its derivatives, carbon nanofibers and carbon nanotubes), metal nanomaterials (gold, silver, bismuth and iron), complexes (MOFs, ZIFs and MXenes) and their composites for the detection of heavy metal ions (mainly include Cd(II), Hg(II), Pb(II), As(III), Cu(II) and Zn(II)) in food and water. The synthetic strategies, mechanisms, innovations, advantages, challenges and prospects of various electrode modification nanomaterials for the detection of heavy metal ions in food and water are discussed.

Rapid and facile preparation of NiFe-layered double hydroxide nanosheets as self-supported electrode for glucose detection in drink sample

Layered double hydroxides have been widely used for electrochemical glucose detection due to their layered structure with more active sites, but they suffer from lower electrical conductivity and long-time hydrothermal preparation. In this paper, NiFe-layered double hydroxide nanosheets supported on nickel foam (NiFe-LDH NSs/NF) was prepared using an ultrafast and facile method via in-situ corroding foam nickel in FeCl3 solution under room temperature, and the whole synthetic process can be accomplished within several minutes. The as-fabricated NiFe-LDH NSs/NF shows significant catalytic activity in the glucose oxidation, showing its great promise in glucose detection. As a self-supported electrode, NiFe-LDH NSs/NF is favorable for glucose detection, with a sensitivity of 9.79 and 3.29 mA mM-1 cm-2 within the linear range of 0.001 to 1.16 mM and 1.16 to 4.67 mM, respectively. Moreover, NiFe-LDH NSs/NF is also selective and reliable towards glucose detection in drink sample.

In situ synthesis of self-supporting conductive CuCo-based bimetal organic framework for sensitive nonenzymatic glucose sensing in serum and beverage

Most MOFs are associated with the inherent defect of low conductivity, limiting their further application in electrochemical sensing. Herein, a self-supporting conductive CuCo-based bimetal organic framework with HHTP as the organic ligand was in situ synthesized on carbon cloth via a one-step hydrothermal method, namely CuCo-MOF/CC. Benefiting from the advantages of electrical conductivity and bimetallic synergies, CuCo-MOF/CC exhibited remarkable electrocatalytic performance toward glucose. Consequently, the prepared sensor demonstrated an outstanding sensitivity of 9317 μA mM-1 cm-2, a wide range of 0.25-2374.5 μM, a low determination limit (0.27 μM), and a rapid response time (1.6 s). The reproducibility, stability, and selectivity were also proved to be satisfactory. Furthermore, the remarkable feasibility of proposed sensor was confirmed in serum and beverages. With the convenience of the one-step hydrothermal method and portability of self-supporting electrode, CuCo-MOF/CC has emerged as a promising candidate for commercial glucose sensors.

Hierarchical N-doped porous carbon scaffold Cu/Co-oxide with enhanced electrochemical sensing properties for the detection of glucose in beverages and ascorbic acid in vitamin C tablets

This research focuses on the development of a highly efficient electrocatalyst, CuxO/NPC@Co3O4/NPC-10-7, for detecting glucose and ascorbic acid. In a 0.1 M NaOH solution, the modified electrode exhibits a sensitivity of 3314.29 μA mM-1 cm-2 for glucose detection. The linear range for ascorbic acid sensing is 0.5 μM - 23.332 mM, with a detection limit as low as 0.24 μM. In a 0.1 M PBS solution, the linear range for ascorbic acid detection extends to 43.328 mM, which represents the best performance reported to date by chronoamperometry. Moreover, the electrode demonstrates high accuracy, with a recovery rate of 96.80 % - 103.60 % for glucose detection and a recovery rate of 95.25 % - 104.83 % for ascorbic acid detection. These results suggest that the CuxO/NPC@Co3O4/NPC-10-7 modified electrode shows significant potential for practical applications in food detection.

A versatile SERS platform based on conductive MOF-enforced carbon paper for rapidly and sensitively monitoring diazepam in aquatic products

Herein, a versatile surface enhanced Raman scattering (SERS) platform was firstly constructed by integrating conductive metal organic framework (CMOF) with controlled electrodeposition of Au nanoparticles (Au NPs) on flexible carbon paper (CP-CMOF@Au) for sensitively recognizing diazepam (DZP) in aquatic products. The CMOF not only provided a pre-concentration effect for boosting sensitivity, but also dramatically improved the intrinsic electrical conductivity contributing to homogeneous distribution of Au NPs and forming SERS-active "hot spot" with superior stability and reproducibility. Based on CP-CMOF@Au chip, DZP can be sensitively detected with low limit of detection of 0.64 ng mL-1 and wide linear detection range from 0.001 to 10 μg mL-1. Also, DZP in aquatic products can be collected and recognized using multiple approaches (drip coating, soaking and wiping) with excellent reusability and satisfactory recovery of 85.8-103.3%. This method would provide an ingenious SERS strategy for rapidly monitoring DZP in aquatic products with good practical applicability.

Sensing platform for the highly sensitive detection of catechol based on composite coupling with conductive Ni3(HITP)2 and nanosilvers

Catechol, which has a high toxicity and low degradability, poses significant risks to both human health and the environment. Tracking of catechol residues is essential to protect human health and to assess the safety of the environment. We constructed sensing platforms to detect catechol based on the conductive metal-organic frameworks [Ni3(HITP)2] and their nanosilver composites. The reduction process of catechol at the Ni3(HITP)2/AgNP electrode is chemically irreversible as a result of the difference in compatibility of the oxidation stability and conductivity between the Ni3(HITP)2/AgNS and Ni3(HITP)2/AgNP electrodes. The electrochemical results show that the Ni3(HITP)2/AgNS electrode presents a lower detection limit of 0.053 μM and better sensitivity, reproducibility and repeatability than the Ni3(HITP)2/AgNP electrode. The kinetic mechanism of the catechol electrooxidation at the surface of the electrode is controlled by diffusion through a 2H+/2e- process. The transfer coefficient is the key factor used to illustrate this process. During the electrochemical conversion of phenol to ketone, more than half of ΔG is used to change the activation energy. We also studied the stability, anti-interference and reproducibility of these electrode systems.

Aptamer tuned nanozyme activity of nickel-metal-organic framework for sensitive electrochemical aptasensing of tetracycline residue

It is urgently needed to develop high-performance method for tetracycline (TC) analysis to meet the growing concerns about food safety. Herein, a MOF of Ni2+-2,3,6,7,10,11-hexahydroxytriphenylene (Ni-HHTP) with peroxidase activity has been prepared and coated on a screen printing electrode, followed by non-covalent adsorption of tetracycline aptamer (TC-Apt) through the π-stacking. The spectroscopic and electrochemical assays show that TC-Apt can effectively enhance the nanozyme activity of Ni-HHTP using 3,3',5,5'-tetramethylbenzidine (TMB)/H2O2 as the probe. Upon binding with TC, the configuration of TC-Apt is changed and desorbs from the Ni-HHTP, resulting in the decrease of the nanozyme activity of aptasensor. Based on this principle, the target TC can be analyzed in concentrations ranging from 10 pM to 1.0 μM, with a detection limit of 1.9 pM. The aptsensor is also applicable for TC analysis in fresh Ctenopharyngodon idella meat and milk, which provides a new approach for TC residue monitoring in food.

Current advancements and prospects of enzymatic and non-enzymatic electrochemical glucose sensors

This review discusses the most current developments and future perspectives in enzymatic and non-enzymatic glucose sensors, which have notably evolved over the preceding quadrennial period. Furthermore, a thorough exploration encompassed the sensor's intricate fabrication processes, the diverse range of materials employed, the underlying principles of detection, and an in-depth assessment of the sensors' efficacy in detecting glucose levels within essential bodily fluids such as human blood serums, urine, saliva, and interstitial fluids. It is worth noting that the accurate quantification of glucose concentrations within human blood has been effectively achieved by utilizing classical enzymatic sensors harmoniously integrated with optical and electrochemical transduction mechanisms. Monitoring glucose levels in various mediums has attracted exceptional attention from industrial to academic researchers for diabetes management, food quality control, clinical medicine, and bioprocess inspection. There has been an enormous demand for the creation of novel glucose sensors over the past ten years. Research has primarily concentrated on succeeding biocompatible and enhanced sensing abilities related to the present technologies, offering innovative avenues for more effective glucose sensors. Recent developments in wearable optical and electrochemical sensors with low cost, high stability, point-of-care testing, and online tracking of glucose concentration levels in biological fluids can aid in managing and controlling diabetes globally. New nanomaterials and biomolecules that can be used in electrochemical sensor systems to identify glucose concentration levels are developed thanks to advances in nanoscience and nanotechnology. Both enzymatic and non-enzymatic glucose electrochemical sensors have garnered much interest recently and have made significant strides in detecting glucose levels. In this review, we summarise several categories of non-enzymatic glucose sensor materials, including composites, non-precious transition metals and their metal oxides, hydroxides, precious metals and their alloys, carbon-based materials, conducting polymers, metal-organic framework (MOF)-based electrocatalysts, and wearable device-based glucose sensors deeply.

In situ Growth of Zeolite Imidazole Frameworks (ZIF-67) on Carbon Cloth for the Application of Oxygen Reduction Reactions and Microbial Fuel Cells

Developing high surface area catalysts is an effective strategy to enhance the oxygen reduction reaction (ORR) in the application of microbial fuel cells (MFCs). This can be achieved by developing a catalyst based on metal-organic frameworks (MOFs) because they offer a porous active site for ORR. In this work, a novel in situ growth of 2D shell nanowires of ZIF-67 as a template for N-doped carbon (Co/NC) via a carbonization route was developed to enhance the ORR performance. The effects of different reaction times and different annealing temperatures were studied for a better ORR activity. The growth of the MOF template on the carbon cloth was confirmed using scanning electron microscopy, field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infrared. The Co/NC-800 exhibited an enhancement in the ORR activity as evidenced by an onset potential and half-wave potential of 0.0 vs V Ag/AgCl and -0.1 vs V Ag/AgCl, respectively, with a limited current density exceeding the commercial Pt/C. Operating Co/NC-800 on MFC revealed a maximum power density of 30 ± 2.5 mW/m2, a maximum current density of 180 ± 2.5 mA/m2.

Ultrafast Response in Nonenzymatic Electrochemical Glucose Sensing with Ni(II)-MOFs by Dimensional Manipulation

Metal-organic frameworks (MOFs) are emerging as promising candidates for electrochemical glucose sensing owing to their ordered channels, tunable chemistry, and atom-precision metal sites. Herein, the efficient nonenzymatic electrochemical glucose sensing is achieved by taking advantage of Ni(II)-based metal-organic frameworks (Ni(II)-MOFs) and acquiring the ever-reported fastest response time. Three Ni(II)-MOFs ({[Ni6L2(H2O)26]4H2O}n (CTGU-33), {Ni(bib)1/2(H2L)1/2(H2O)3}n (CTGU-34), {Ni(phen)(H2L)1/2(H2O)2}n (CTGU-35)) have been synthesized for the first time, which use benzene-1,2,3,4,5,6-hexacarboxylic acid (H6L) as an organic ligand and introduce 1,4-bis(1-imidazoly)benzene (bib) or 1,10-phenanthroline (phen) as spatially auxiliary ligands. Bib and phen convert the coordination mode of CTGU-33, affording structural dimensions from 2D of CTGU-33 to 3D of CTGU-34 or 1D of CTGU-35. By tuning the dimension of the skeleton, CTGU-34 with 3D interconnected channels exhibits an ultrafast response of less than 0.4 s, which is superior to the existing nonenzymatic electrochemical sensors. Additionally, a low detection limit of 0.12 μM (S/N = 3) and a high sensitivity of 1705 μA mM-1 cm-2 are simultaneously achieved. CTGU-34 further showcases desirable anti-interference and cycling stability, which demonstrates a promising application prospect in the real-time detection of glucose.

Ni-Rh-based bimetallic conductive MOF as a high-performance electrocatalyst for the oxygen evolution reaction

Metal-organic frameworks (MOFs) have recently been considered the promising catalysts due to their merits of abundant metal sites, versatile coordination groups, and tunable porous structure. However, low electronic conductivity of most MOFs obstructs their direct application in electrocatalysis. In this work, we fabricate an Ni-Rh bimetallic conductive MOF ([Ni2.85Rh0.15(HHTP)2]n/CC) grown in situ on carbon cloth. Abundant nanopores in the conductive MOFs expose additional catalytic active sites, and the advantageous 2D π-conjugated structure helps accelerate charge transfer. Owing to the introduction of Rh, [Ni2.85Rh0.15(HHTP)2]n/CC exhibited substantially improved oxygen evolution reaction (OER) activity and exhibited only an overpotential of 320 mV to achieve the current density of 20 mA cm-2. The remarkable OER performance confirmed by the electrochemical tests could be ascribed to the synergistic effect caused by the doped Rh together with Ni in [Ni2.85Rh0.15(HHTP)2]n/CC, thereby exhibiting outstanding electrocatalytic performance.

Cyclodextrin Host-Guest Recognition in Glucose-Monitoring Sensors

Diabetes mellitus is a prevalent chronic health condition that has caused millions of deaths worldwide. Monitoring blood glucose levels is crucial in diabetes management, aiding in clinical decision making and reducing the incidence of hypoglycemic episodes, thereby decreasing morbidity and mortality rates. Despite advancements in glucose monitoring (GM), the development of noninvasive, rapid, accurate, sensitive, selective, and stable systems for continuous monitoring remains a challenge. Addressing these challenges is critical to improving the clinical utility of GM technologies in diabetes management. In this concept, cyclodextrins (CDs) can be instrumental in the development of GM systems due to their high supramolecular recognition capabilities based on the host-guest interaction. The introduction of CDs into GM systems not only impacts the sensitivity, selectivity, and detection limit of the monitoring process but also improves biocompatibility and stability. These findings motivated the current review to provide a comprehensive summary of CD-based blood glucose sensors and their chemistry of glucose detection, efficiency, and accuracy. We categorize CD-based sensors into four groups based on their modification strategies, including CD-modified boronic acid, CD-modified mediators, CD-modified nanoparticles, and CD-modified functionalized polymers. These findings shed light on the potential of CD-based sensors as a promising tool for continuous GM in diabetes mellitus management.

Immobilization of Enzyme Electrochemical Biosensors and Their Application to Food Bioprocess Monitoring

Electrochemical biosensors based on immobilized enzymes are among the most popular and commercially successful biosensors. The literature in this field suggests that modification of electrodes with nanomaterials is an excellent method for enzyme immobilization, which can greatly improve the stability and sensitivity of the sensor. However, the poor stability, weak reproducibility, and limited lifetime of the enzyme itself still limit the requirements for the development of enzyme electrochemical biosensors for food production process monitoring. Therefore, constructing sensing technologies based on enzyme electrochemical biosensors remains a great challenge. This article outlines the construction principles of four generations of enzyme electrochemical biosensors and discusses the applications of single-enzyme systems, multi-enzyme systems, and nano-enzyme systems developed based on these principles. The article further describes methods to improve enzyme immobilization by combining different types of nanomaterials such as metals and their oxides, graphene-related materials, metal-organic frameworks, carbon nanotubes, and conducting polymers. In addition, the article highlights the challenges and future trends of enzyme electrochemical biosensors, providing theoretical support and future perspectives for further research and development of high-performance enzyme chemical biosensors.

Microplasma and quenching-induced Co doped NiMoO4 nanorods with oxygen vacancies for electrochemical determination of glucose in food and serum

In this paper, Co-doped NiMoO₄ nanorods with oxygen vacancies are synthesized on carbon cloth (Co-NiMoO₄ NRs/CC) via microplasma and quenching-induced method.Owing to the surface defects and metal ion doping, the electronic structure and surface properties of the catalyst are tuned.Cyclic voltammetry (CV) and amperometry are used to investigate the electrocatalytic behavior of the glucose sensor in an alkaline medium with sensitivities of 7411 and 3125 μA L mmol^-1 cm^-2 in the linear range 1.0 μmol L^-1 to 1.0 mmol L^-1 and 1.0 mmol L^-1 to 7.0 mmol L^-1, respectively. The detection limit is 0.079 μmol L^-1 at S/N = 3. Moreover, the as-prepared catalyst electrode is also successfully used in real food and serum samples, with a recovery rate of 97.1%-107.4%.The DFT calculations show that the Co site of the catalyst significantly influenced glucose sensing performance. This idea expands the application of quenching chemistry in electrochemical sensing.

Recent Progress in MOF-Based Electrochemical Sensors for Non-Enzymatic Glucose Detection

In recent years, substantial advancements have been made in the development of enzyme-free glucose sensors utilizing pristine metal-organic frameworks (MOFs) and their combinations. This paper provides a comprehensive exploration of various MOF-based glucose sensors, encompassing monometallic MOF sensors as well as multi-metal MOF combinations. These approaches demonstrate improved glucose detection capabilities, facilitated by the augmented surface area and availability of active sites within the MOF structures. Furthermore, the paper delves into the application of MOF complexes and derivatives in enzyme-free glucose sensing. Derivatives incorporating carbon or metal components, such as carbon cloth synthesis, rGO-MOF composites, and core-shell structures incorporating noble metals, exhibit enhanced electrochemical performance. Additionally, the integration of MOFs with foams or biomolecules, such as porphyrins, enhances the electrocatalytic properties for glucose detection. Finally, this paper concludes with an outlook on the future development prospects of enzyme-free glucose MOF sensors.

Recent Advances in Metal-Organic Frameworks (MOFs) and Their Composites for Non-Enzymatic Electrochemical Glucose Sensors

In recent years, with pressing needs such as diabetes management, the detection of glucose in various substrates has attracted unprecedented interest from researchers in academia and industry. As a relatively new glucose sensor, non-enzymatic target detection has the characteristics of high sensitivity, good stability and simple manufacturing process. However, it is urgent to explore novel materials with low cost, high stability and excellent performance to modify electrodes. Metal-organic frameworks (MOFs) and their composites have the advantages of large surface area, high porosity and high catalytic efficiency, which can be utilized as excellent materials for electrode modification of non-enzymatic electrochemical glucose sensors. However, MOFs and their composites still face various challenges and difficulties that limit their further commercialization. This review introduces the applications and the challenges of MOFs and their composites in non-enzymatic electrochemical glucose sensors. Finally, an outlook on the development of MOFs and their composites is also presented.

A sensitive enzyme-free electrochemical sensor based on a rod-shaped bimetallic MOF anchored on graphene oxide nanosheets for determination of glucose in huangshui

In this work, we propose a bimetallic Ni-Co based MOF attached to graphene oxide (GO) by a one-step hydrothermal approach which may be employed as an electrochemical enzyme-free glucose sensor. Due to the obvious synergistic catalysis of Ni and Co, as well as the combination of NiCo-MOF and GO, NiCo-MOF/GO not only enhances energy transfer and electrocatalytic performance but also provides a larger surface area and more active sites. Electrochemical studies show that NiCo-MOF/GO exhibits outstanding electrochemical activity, with a sensitivity of 11 177 μA mM^-1 cm^-2 and 4492 μA mM^-1 cm^-2 in the linear ranges of 1-497 μM and 597-3997 μM, a detection limit of 0.23 μM, and a response time of 2 seconds. More importantly, the newly fabricated sensor is successfully applied for glucose determination in huangshui. This method provides a novel strategy for the controlled fermentation process and product quality of Chinese baijiu.

One-step rapid synthesis of Ni0.5Co0.5-CPO-27 nanorod array with oxygen vacancies based on DBD microplasma: As an effective non-enzymatic glucose sensor for beverage and human serum

The rational design of high-efficiency catalysts for non-enzymatic glucose sensing is extremely important for the timely and effective monitoring of glucose content in beverages and human blood. A 3D bimetallic organic framework (Coordination Polymer of Oslo, CPO) nanorod array with oxygen vacancies was green fabricated on carbon cloth (Ni_0.5Co_0.5-CPO-27 NRA/CC) using dielectric barrier discharge (DBD) microplasma for the first time. Density functional theory (DFT) calculations demonstrated that the oxygen vacancy of Ni_0.5Co_0.5-CPO-27 can be effectively induced under DBD microplasma conditions. Based on the 3D nanorod arrays with rich oxygen vacancies and bimetallic synergistic effects, as a non-enzyme glucose sensor, the Ni_0.5Co_0.5-CPO-27 electrode exhibited a sensitivity of 8499.5 μA L/mmol cm^-2 and 3239.2 μA L/mmol cm^-2 and a limit of detection (LOD) of 0.16 μmol/L (S/N = 3). It has been successfully applied to the determination of glucose levels in real samples such as cola, green tea and human serum.

Ultra-thin 2D bimetallic MOF nanosheets for highly sensitive and stable detection of glucose in sweat for dancer

The measurement of glucose concentration in sweat is expected to replace the existing blood glucose detection, which realize the effective way of non-invasive monitoring of human glucose concentration in dancing. High precision glucose detection can be achieved by adjusting the electrode material of the sensor. Thus, in this work, the bimetallic organic frameworks (bi-MOFs) materials containing Mn and Ni ions (NiMn-MOF) with ultrathin nanosheets have been exquisitely designed. The ultrathin nanosheet and heterogeneous metal ions in the structure optimize the electronic structure, which improves the electrical conductivity of MOFs. The success of the preparation strategy leads the good electrocatalytic performance of NiMn-MOF for glucose detection. Detailedly, NiMn-MOF shows high sensitivity of 1576 μA mM-1 cm-2 in the linear range from 0 to 0.205 mM and the wide linear region of 0.255-2.655 mM and 3.655-5.655 mM were also observed. In addition, the high repeatability, reproductivity, long-term stability and ultra-low limited of detection (LOD, 0.28 μM, S/N = 3) provide foundation for the practical sensor application of this NiMn-MOF nanosheets. Remarkably, as designed NiMn-MOF sensor can accurately measure glucose in sweat showing great potential in the field of wearable glucose monitoring during dancing.

Electrochemical Sensing of H2O2 by Employing a Flexible Fe3O4/Graphene/Carbon Cloth as Working Electrode

We report the synthesis of Fe₃O₄/graphene (Fe₃O₄/Gr) nanocomposite for highly selective and highly sensitive peroxide sensor application. The nanocomposites were produced by a modified co-precipitation method. Further, structural, chemical, and morphological characterization of the Fe₃O₄/Gr was investigated by standard characterization techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and high-resolution TEM (HRTEM), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The average crystal size of Fe₃O₄ nanoparticles was calculated as 14.5 nm. Moreover, nanocomposite (Fe₃O₄/Gr) was employed to fabricate the flexible electrode using polymeric carbon fiber cloth or carbon cloth (pCFC or CC) as support. The electrochemical performance of as-fabricated Fe₃O₄/Gr/CC was evaluated toward H₂O₂ with excellent electrocatalytic activity. It was found that Fe₃O₄/Gr/CC-based electrodes show a good linear range, high sensitivity, and a low detection limit for H₂O₂ detection. The linear range for the optimized sensor was found to be in the range of 10-110 μM and limit of detection was calculated as 4.79 μM with a sensitivity of 0.037 µA μM^-1 cm^-2. The cost-effective materials used in this work as compared to noble metals provide satisfactory results. As well as showing high stability, the proposed biosensor is also highly reproducible.

High-Performance Detection of Exosomes Based on Synergistic Amplification of Amino-Functionalized Fe3O4 Nanoparticles and Two-Dimensional MXene Nanosheets

Exosomes derived from cancer cells have been recognized as a promising biomarker for minimally invasive liquid biopsy. Herein, a novel sandwich-type biosensor was fabricated for highly sensitive detection of exosomes. Amino-functionalized Fe₃O₄ nanoparticles were synthesized as a sensing interface with a large surface area and rapid enrichment capacity, while two-dimensional MXene nanosheets were used as signal amplifiers with excellent electrical properties. Specifically, CD63 aptamer attached Fe₃O₄ nanoprobes capture the target exosomes. MXene nanosheets modified with epithelial cell adhesion molecule (EpCAM) aptamer were tethered on the electrode surface to enhance the quantification of exosomes captured with the detection of remaining protein sites. With such a design, the proposed biosensor showed a wide linear range from 10² particles μL^-1 to 10⁷ particles μL^-1 for sensing 4T1 exosomes, with a low detection limit of 43 particles μL^-1. In addition, this sensing platform can determine four different tumor cell types (4T1, Hela, HepG2, and A549) using surface proteins corresponding to aptamers 1 and 2 (CD63 and EpCAM) and showcases good specificity in serum samples. These preliminary results demonstrate the feasibility of establishing a sensitive, accurate, and inexpensive electrochemical sensor for detecting exosome concentrations and species. Moreover, they provide a significant reference for exosome applications in clinical settings, such as liquid biopsy and early cancer diagnosis.

Electrochemical-Based Sensing Platforms for Detection of Glucose and H2O2 by Porous Metal-Organic Frameworks: A Review of Status and Prospects

Establishing enzyme-free sensing assays with great selectivity and sensitivity for glucose and H₂O₂ detection has been highly required in biological science. In particular, the exploitation of nanomaterials by using noble metals of high conductivity and surface area has been widely investigated to act as selective catalytic agents for molecular recognition in sensing platforms. Several approaches for a straightforward, speedy, selective, and sensitive recognition of glucose and H₂O₂ were requested. This paper reviews the current progress in electrochemical detection using metal-organic frameworks (MOFs) for H₂O₂ and glucose recognition. We have reviewed the latest electrochemical sensing assays for in-place detection with priorities including straightforward procedure and manipulation, high sensitivity, varied linear range, and economic prospects. The mentioned sensing assays apply electrochemical systems through a rapid detection time that enables real-time recognition. In profitable fields, the obstacles that have been associated with sample preparation and tool expense can be solved by applying these sensing means. Some parameters, including the impedance, intensity, and potential difference measurement methods have permitted low limit of detections (LODs) and noticeable durations in agricultural, water, and foodstuff samples with high levels of glucose and H₂O₂.

Hierarchical copper-based metal-organic frameworks nanosheet assemblies for electrochemical ascorbic acid sensing

Noninvasive human health monitoring requires the development of efficient electrochemical sensors for the quantitative analysis of infinitesimal biomolecules. In this work, we reported a novel hierarchical nanosheet assemblies (HSA) of copper-based metal-organic frameworks (MOFs) as an electrochemical sensor for ascorbic acid (AA) detection. Copper 1,4-benzenedicarboxylate (CuBDC) HSA was constructed by three steps of in situ growth on stone paper, including hydrolysis, anion exchange, and heteroepitaxy growth. The monodispersed two-dimensional MOFs nanosheet units were aligned in an orderly manner and arranged into three-dimensional hierarchical assemblies. The CuBDC HSA-based AA sensor displayed a high sensitivity of 396.8 μA mM^-1 cm^-2 and a low detection limit of 0.1 μM. Excellent selectivity, stability and reproducibility were also obtained. Benefiting from the advantages of ultrathin nanosheets and nature-inspired hierarchy, this unique architecture facilitated reactant dispersion and maximized the accessible active sites and charge-transport capability and thus had superior catalytic ability for the electro-oxidation of ascorbic acid compared to bulk MOFs. Moreover, the CuBDC HSA sensor performed AA level detection in juice samples with acceptable accuracy and verified the feasibility for sweat AA sensing. This novel MOFs architecture holds great potential as an electrochemical sensor to detect AA for noninvasive human health monitoring in the future.

Advances in Biosensing of Chemical Food Contaminants Based on the MOFs-Graphene Nanohybrids

Food safety issue is becoming an international challenge for human health owing to the presence of contaminants. In this context, reliable, rapid, and sensitive detecting technology is extremely demanded to establish food safety assurance systems. MOFs (Metal-organic frameworks) are a new type of porous crystalline material with particular physical and chemical characteristics presented in food safety requirements. (Bio)sensors driven MOF materials have emerged as a promising alternative and complementary analytical techniques, owing to their great specific area, high porosity, and uniform and fine-tunable pore buildings. Nevertheless, the insufficient stability and electrical conductivity of classical MOFs limit their utilization. Employing graphene-derived nanomaterials with high functional elements as patterns for the MOF materials not only improves the structural instability and poor conductivity but also impedes the restacking and aggregation between graphene layers, thus significantly extending the MOFs application. A review of MOFs-graphene-based material used in food contamination detection is urgently needed for encouraging the advance of this field. Herein, this paper systematically outlines current breakthroughs in MOF-graphene-based nanoprobes, outlines their principles, and illustrates their employments in identifying mycotoxins, heavy metal ions, pathogens, antibiotics, and pesticides, referring to their multiplexing and sensitivity ability. The challenges and limitations of applying MOF-graphene composite for precise and efficient assessment of food were also debated. This paper would maybe offer some inspired concepts for an upcoming study on MOF-based composites in the food security context.

Ultrafast construction of 3D ultrathin NiCo-LDH@Cu heteronanosheet array by plasma magnetron sputtering for non-enzymatic glucose sensing in beverage and human serum

In this work, a 3D ultra-thin NiCo-LDH nanosheet array coated Cu nanoparticles on carbon cloth (NiCo-LDH@Cu NSA/CC) was ultrafast synthesized by plasma magnetron sputtering for the first time. This method has low toxicity and is easy to operate. As a durable and efficient 3D heteronanoarray electrocatalyst for glucose detection, NiCo-LDH@Cu NSA/CC has higher stable conductivity and faster electron transport rate than NiCo-LDH NSA/CC and Cu nanoparticles, which work through synergistic effect to form a high-performance sensing platform. The NiCo-LDH@Cu NSA/CC heteronanosheet structure has good electrocatalytic performance for glucose oxidation, with the sensitivity of the two linear ranges (0.001-1 mmol L^-1 and 1-6 mmol L^-1) being 9710 μA L mmol^-1 cm^-2 and 4870 μA L mmol^-1 cm^-2, respectively, and the detection limit (LOD) is 157 nmol L^-1 (S/N = 3). The sensor has been successfully applied to detect glucose in beverages and serum.

Synergistic catalytic enhancement of metal-organic framework derived nanoarchitectures decorated on graphene as a high-efficiency bifunctional electrocatalyst for methanol oxidation and oxygen reduction

Designing highly efficient, long-lasting, and cost-effective cathodic and anodic functional materials as a bifunctional electrocatalyst is essential for overcoming the bottleneck in fuel cell development. Herein, a novel two-step synthesis strategy is developed to synthesize metal-organic framework (MOF) derived nitrogen-doped carbon (NC) with improved spatial isolation and a higher loading amount of cobalt (Co) and nickel carbide (Ni₃C) nanocrystal decorated on graphene (denoted as Co@NC-Ni₃C/G). Benefiting from multiple active sites of high N-doping level, uniform dispersion of Co and Ni₃C nanocrystals, and a large active area of graphene, the Co@NC-Ni₃C/G hybrids exhibit excellent methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR) efficiency in an alkaline environment. For MOR, the optimized Co@NC-Ni₃C/G-350 catalyst achieved a current density of 44.8 mA cm^-2 at an applied potential of 1.47 V (V vs. RHE), which is significantly higher than Co@NC-Ni₃C (42.07 mA cm^-2) and Co@NC (24.1 mA cm^-2) in 0.5 M methanol + 1.0 M KOH solutions. In addition, during the CO retention test, the Co@NC-Ni₃C/G-350 catalyst exhibits excellent CO tolerance capacity. Excitingly, the as-prepared Co@NC-Ni₃C/G-350 hybrid exhibits significantly improved ORR catalytic efficiency in terms of positive onset and half-wave potential (E_onset = 0.90 V, E_1/2 = 0.830 V vs. RHE), small Tafel slope (34 mV dec^-1) and excellent durability (only reduced 0.016 V after 5000 s test). This work provides new insights into MOF-derived functional nanomaterials for anode and cathode co-catalysts for methanol fuel cells.

Defect Surface Engineering of Hollow NiCo2S4 Nanoprisms towards Performance-Enhanced Non-Enzymatic Glucose Oxidation

Transition metal sulfides have been explored as electrode materials for non-enzymatic detection. In this work, we investigated the effects of phosphorus doping on the electrochemical performances of NiCo₂S₄ electrodes (P-NiCo₂S₄) towards glucose oxidation. The fabricated non-enzymatic biosensor displayed better sensing performances than pristine NiCo₂S₄, with a good sensitivity of 250 µA mM^-1 cm^-2, a low detection limit (LOD) of 0.46 µM (S/N = 3), a wide linear range of 0.001 to 5.2 mM, and high selectivity. Moreover, P-NiCo₂S₄ demonstrated its feasibility for glucose determination for practical sample testing. This is due to the fact that the synergetic effects between Ni and Co species, and the partial substitution of S vacancies with P can help to increase electronic conductivity, enrich binary electroactive sites, and facilitate surface electroactivity. Thus, it is found that the incorporation of dopants into NiCo₂S₄ is an effective strategy to improve the electrochemical activity of host materials.

Prism-like bimetallic (Ni-Co) alkaline carboxylate-based non-enzymatic sensor capable of exceptionally high catalytic activity towards glucose

In this study, we fabricated a novel non-enzymatic glucose sensor based on prism-like bimetallic alkaline carboxylate (CoNi-MIM). The morphology and structure of CoNi-MIM were carefully investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The electrochemical glucose oxidation of the synthesized sensor was then explored by cyclic voltammetry (CV) and chronoamperometry in alkaline medium. It was found that CoNi-MIM is the optimal choice with a remarkably high sensitivity of 5024.4 μA mM^-1 cm^-2, low detection limit of 56.1 nM (S/N = 3), linear response of up to 14.3 mM and excellent selectivity compared to Co-MIM, CoFe-MIM and CoMn-MIM. Furthermore, the as-fabricated sensor demonstrated appreciable practicality for the determination of glucose in real samples. These results indicate that CoNi-MIM holds a good application prospect in non-enzymatic glucose sensing.

Conductive metal-organic framework based label-free electrochemical detection of circulating tumor DNA

An ultrasensitive electrochemical biosensor was designed for the rapid label-free detection of circulating tumor DNA (ctDNA, EGFR 19 Dels for non-small cell lung cancer, NSCLC). We linked the highly conjugated tricatecholate, 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) with Ni(II) ions into the two-dimensional porous conductive metal-organic frameworks (MOFs), which is termed Ni-catecholates (Ni-CAT). Then, the AuNPs/Ni-catecholates/carbon black/polarized pencil graphite electrode (AuNPs/Ni-CAT/CB/PPGE) was obtained by electrodeposition of AuNPs on the surface of PPGE modified with Ni-CAT/CB composite materials. The AuNPs/Ni-CAT/CB/PPGE were used for label-less detection of ctDNA, with a total detection time of only 30 min. Under optimal detection conditions, the AuNPs/Ni-CAT/CB/PPGE sensor exhibited excellent detection performance with good linear response to ctDNA over a wide concentration range and the detection limit down to the femtomolar level. The sensor was applied to the determination of ctDNA in serum samples with high sensitivity. This simple, efficient, and expeditious method has practical value in liquid biopsy of ctDNA and has potential for development in early detection, treatment, and prognosis of tumors. Herein, an ultrasensitive electrochemical biosensor was designed for the rapid label-free detection of ctDNA (EGFR 19 Dels for non-small cell lung cancer, NSCLC). We linked the highly conjugated tricatecholate, 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) with Ni(II) ions into the two-dimensional porous conductive metal-organic frameworks (MOFs), which is termed as Ni-catecholates (Ni-CAT). Then, the AuNPs/Ni-catecholates/carbon black/polarized pencil graphite electrode (AuNPs/Ni-CAT/CB/PPGE) was obtained by electrodeposition of AuNPs on the surface of PPGE modified with Ni-CAT/CB composite materials. The AuNPs/Ni-CAT/CB/PPGEs were used for label-less detection of ctDNA, with a total detection time of only 30 min. Under optimal detection conditions, the AuNPs/Ni-CAT/CB/PPGE sensor exhibited excellent detection performance with good linear response to ctDNA in the concentration range of 1 × 10^-15 M to 1 × 10^-6 M and with a detection limit as low as 0.32 fM. The sensor was applied for determination of ctDNA in serum samples and gave high sensitivity. This simple, efficient and expeditious method has practical value in liquid biopsy of ctDNA and has potential for development in early detection, treatment and prognosis of tumors.

Bimetallic FeMn@C derived from Prussian blue analogue as efficient nanozyme for glucose detection

In recent decades, nanomaterial-based artificial enzymes called nanozymes have received more and more attention and have been applied in biological, chemical, medical, and other fields. In this work, bimetallic FeMn@C was synthesized by calcination from the Prussian blue analogue. The synthesized bimetallic FeMn@C exhibits efficient peroxidase-like activity. The effect of Mn doping amount, catalytic kinetics, and mechanism of FeMn@C nanozyme was further studied in detail. The results show that the peroxidase-like activity of bimetallic FeMn@C is nearly 16 times higher than that of single-metal Fe@C. The peroxidase-like activity of FeMn@C originates from its production of radicals. Compared with natural enzymes, FeMn@C nanozyme has a better affinity for the substrates. Besides, FeMn@C nanozyme has better stability than natural enzymes. Because of its strong magnetism, FeMn@C nanozyme can be recycled easily and exhibits excellent recycling performance. Based on the good affinity of FeMn@C for H₂O₂, a rapid and selective colorimetric assay for glucose detection is constructed, with a wide linear range of 0.01-0.75 mM and low detection limit of 4.28 µM. This sensor has been successfully applied to the determination of glucose in fruit juice, showing good selectivity and accuracy. The synthesis of bimetallic FeMn@C provides a feasible way to design nanozymes with excellent catalytic activity, high stability, and easy separation.

Fast and efficient electrocatalytic oxidation of glucose triggered by Cu2O-CuO nanoparticles supported on carbon nanotubes

Electrocatalytic glucose oxidation reaction (GOR) is the key to construct sophisticated devices for fast and accurately detecting trace glucose in blood and food. Herein, a noble-metal-free Cu/C-60 catalyst is fabricated by supporting Cu₂O-CuO nanoparticles on carbon nanotubes through a novel discharge process. For GOR, Cu/C-60 shows a sensitivity as high as 532 μA mM⁻¹ cm⁻², a detection limit as low as 1 μM and a steady-state response time of only 5.5 s. Moreover, Cu/C-60 has outstanding stability and anti-interference ability to impurities. The synergistic effect of Cu₂O-CuO could improve the adsorption and conversion of glucose, thus enhancing GOR performance. By using Cu/C-60, we fabricate a three-electrode chip. A portable and compact electrochemical system is constructed by connecting the three-electrode chip with Cu/C-60 to an integrated circuit board and a mobile phone for recording and displaying data. The portable and compact electrochemical system results in a GOR sensitivity of 501 μA mM⁻¹ cm⁻², which is close to the data measured on the bloated electrochemical workstation. The detection limit of the portable and compact electrochemical system in GOR is 50 μM. This is higher than those obtained on the bloated electrochemical workstation, but is much lower than the common blood glucose concentration of human body (>3 mM). This demonstrates the accuracy, reasonability and applicability of the portable and compact electrochemical system. The results of the present work are helpful for fabricating fast, efficient and portable devices for detecting trace amount of glucose in blood and food.

Enzyme-immobilized metal-organic frameworks: From preparation to application

As a class of widely used biocatalysts, enzymes possess advantages including high catalytic efficiency, strong specificity and mild reaction condition. However, most free enzymes have high requirements on the reaction environment and are easy to deactivate. Immobilization of enzymes on nanomaterial-based substrates is a good way to solve this problem. Metal-organic framework (MOFs), with ultra-high specific surface area and adjustable porosity, can provide a large space to carry enzymes. And the tightly surrounded protective layer of MOFs can stabilize the enzyme structure to a great extent. In addition, the unique porous network structure enables selective mass transfer of substrates and facilitates catalytic processes. Therefore, these enzyme-immobilized MOFs have been widely used in various research fields, such as molecule/biomolecule sensing and imaging, disease treatment, energy and environment protection. In this review, the preparation strategies and applications of enzymes-immobilized MOFs are illustrated and the prospects and current challenges are discussed.

Morphology Control Strategy of Bimetallic MOF Nanosheets for Upgrading the Sensitivity of Noninvasive Glucose Detection

The precise measurement of glucose level is significant for the health management of the human body. However, the existing sensitive materials and detection methods for glucose are less satisfying for practical applications. Herein, an ultrathin reticular two-dimensional nanosheets array composed of trimesic acid (H₃BTC)-based bimetal metal-organic frameworks (MOFs) and carbon cloth (CC), which is constructed through a morphology control strategy, is reported for glucose sensing. Meanwhile, this nonmoving sweat glucose sensor based on a NiCo-BTC/CC electrode has been successfully prepared by a screen printing method. Benefiting from the regular and ultrathin nanosheets array, the NiCo-BTC/CC electrode has an excellent sensitivity of 2701.29 μA mM^-1 cm^-2, which is about 2.4 times that of its unregulated counterpart (1127.85 μA mM^-1 cm^-2) in the linear range 5-205 μM. In addition, an ultralow detection limit (0.09 μM, S/N = 3) and good selectivity of NiCo-BTC/CC were also obtained. The high sensitivity of the glucose sensor based on NiCo-BTC/CC electrode is 0.174 μA μM^-1 (50-1000 μM). Remarkably, the preciously designed sensor is used to detect glucose concentration in sweat with a noninvasive mode, and the results are basically consistent with those of a commercial glucose device with an invasive mode. This research exhibits potential methodology for the morphology design of bimetallic MOFs nanosheets to achieve a high accuracy rate and noninvasive and timeless measurement of a glucose sensor.