Application of essential oils in packaging films for the preservation of fruits and vegetables: A review

Antibacterial mechanism of whey protein isolated-citral nanoparticles and stable synergistic antibacterial eugenol encapsulated Pickering emulsion for grapes preservation

The purpose of this study was to prepare Pickering emulsion with synergistic antibacterial effect using whey protein isolated-citral (WPI-Cit) nanoparticles with eugenol for grape preservation. In this emulsion, eugenol was encapsulated in oil phase. The particle size, ζ-potential, and antibacterial mechanism of the nanoparticles were characterized. The rheological properties, antibacterial effects and preservation effects of WPI-Cit Pickering emulsion were measured. The results showed that the optimal preparation condition was performed at WPI/Cit mass ratio of 1:1, WPI-Cit nanoparticles were found to damage the cell wall and membrane of bacteria and showed more effective inhibition against S. aureus. Pickering emulsion prepared with WPI-Cit nanoparticles exhibited a better antibacterial effect after eugenol was encapsulated in it, which extended the shelf life of grapes when the Pickering emulsion was applied as a coating. It demonstrated that the Pickering emulsion prepared in this study provides a new way to extend the shelf life.

Formulations based on pullulan and a derivative as coating material for the food sector

Carboxymethylated derivatives of pullulan (PU) were synthesized and evaluated as coating for the postharvest preservation of blueberries. Carboxymethylpullulan was obtained by etherification reaction with the substitution degrees of 0.52, 0.34, and 0.26 for CMP1, CMP2, and CMP3 respectively. Infrared spectroscopy and nuclear magnetic resonance results showed characteristic signals of the carbonyl group belonging to the carboxymethyl group. Thermal analysis showed that CMP1, CMP2, and CMP3 derivatives presented thermal stability values of 209.91 C, 214.73 C, and 225.52 °C, respectively, and were lower with respect to PU with Td of 238.84 °C. Furthermore, an increase in the glass transition temperature due to carboxymethylation was determined. The chemical modification decreased the contact angle with respect to PU (71.34°) with values for CMP1, CMP2, and CMP3 of 39.89°, 53.72° and 60.61°, respectively. The carboxymethylation also increased the water vapor permeability and mechanical properties of the films. In addition, it was found that the CMP molecules affected the optical properties. The application of CMP-based coatings reduced the mass loss and ripening rate of blueberries compared to native pullulan, therefore, packaging from CMP molecules could be used as a coating capable of delaying ripening and extending the shelf life of fruits.

Synthesis of Nanosized γ-Cyclodextrin Metal-Organic Frameworks as Carriers of Limonene for Fresh-Cut Fruit Preservation Based on Polycaprolactone Nanofibers

To address the issue of bacterial growth on fresh-cut fruits, this paper reports the synthesis of nanosized γ-cyclodextrin metal-organic frameworks (CD-MOFs) using an ultrasound-assisted method and their application as carriers of limonene for antibacterial active packaging. The effects of the processing parameters on the morphology and crystallinity of the CD-MOFs are investigated, and the results prove that the addition of methanol is the key to producing nanosized CD-MOFs. The limonene loading content of the nanosized CD-MOFs can reach approximately 170 mg g-1. The sustained-release behaviors of limonene in the CD-MOFs are evaluated. Molecular docking simulations reveal the distribution and binding sites of limonene in the CD-MOFs. CD-MOFs are deposited on the surfaces of polycaprolactone (PCL) nanofibers via an immersion method, and limonene-loaded CD-MOF@PCL nanofibers are prepared. The morphology, crystallinity, thermal stability, mechanical properties, and antibacterial activity of the nanofibers are also studied. The nanofiber film effectively inhibits bacterial growth and prolongs the shelf life of fresh-cut apples. This study provides a novel strategy for developing antibacterial active packaging materials based on CD-MOFs and PCL nanofibers.

Essential oils ameliorate the intestinal damages induced by nonylphenol exposure by modulating tryptophan metabolism and activating aryl hydrocarbon receptor via gut microbiota regulation

Nonylphenol (NP) is a ubiquitous endocrine disruptor that persists in the environment and can significantly contribute to serious health hazards, particularly intestinal barrier injury. Plant essential oils (EOs) have recently gained widespread interest due to their potential for improving intestinal health. However, the precise mechanism and protective effects of EOs ameliorating the intestinal damages induced by NP exposure remain unclear. To clarify the potential mechanism and protective impact of EOs against intestinal injury induced by NP, a total of 144 one-day-old male ducks were randomly allocated to four groups: CON (basal diet), EO (basal diet + 200 mg/kg EOs), NP (basal diet + 40 mg/kg NP), and NPEO (basal diet + 200 mg/kg EOs + 40 mg/kg NP). The data revealed that NP exposure significantly damaged intestinal barrier, as evidenced by a reduction in the levels of tight junction gene expression and an increase in intestinal permeability. Additionally, it disturbed gut microbiota, as well as interfered with tryptophan (Trp) metabolism. The NP-induced disorder of Trp metabolism restrained the activation of aryl hydrocarbon receptor (AhR) and resulted in decreased the expression levels of CYP1A1, IL-22, and STAT3 genes, which were alleviated after treatment with EOs. Taken together, NP exposure resulted in impairment of the intestinal barrier function, disruption of gut microbiota, and disturbances in Trp metabolism. Dietary EOs supplementation alleviated the intestinal barrier injury induced by NP through the Trp/AhR/IL-22 signaling pathway.

Novel Post-Harvest Preservation Techniques for Edible Fungi: A Review

Edible fungi are well known for their rich nutrition and unique flavor. However, their post-harvest shelf-life is relatively short, and effective post-harvest preservation techniques are crucial for maintaining their quality. In recent years, many new technologies have been used for the preservation of edible fungi. These technologies include cold plasma treatment, electrostatic field treatment, active packaging, edible coatings, antimicrobial photodynamic therapy, and genetic editing, among others. This paper reviews the new methods for post-harvest preservation of mainstream edible fungi. By comprehensively evaluating the relative advantages and limitations of these new technologies, their potential and challenges in practical applications are inferred. The paper also proposes directions and suggestions for the future development of edible fungi preservation, aiming to provide reference and guidance for improving the quality of edible fungi products and extending their shelf-life.

Preparation of Steamed Purple Sweet Potato-Based Films Containing Mandarin Essential Oil for Smart Packaging

Anthocyanin-rich steamed purple sweet potato (SPSP) is a suitable raw material to produce smart packaging films. However, the application of SPSP-based films is restricted by the low antimicrobial activity of anthocyanins. In this study, SPSP-based smart packaging films were produced by adding mandarin essential oil (MEO) as an antimicrobial agent. The impact of MEO content (3%, 6%, and 9%) on the structures, properties, and application of SPSP-based films was measured. The results showed that MEO created several pores within films and reduced the hydrogen bonding system and crystallinity of films. The dark purple color of the SPSP films was almost unchanged by MEO. MEO significantly decreased the light transmittance, water vapor permeability, and tensile strength of the films, but remarkably increased the oxygen permeability, thermal stability, and antioxidant and antimicrobial properties of the films. The SPSP-MEO films showed intuitive color changes at different acid-base conditions. The purple-colored SPSP-MEO films turned blue when chilled shrimp and pork were not fresh. The MEO content greatly influenced the structures, physical properties, and antioxidant and antimicrobial activities of the films. However, the MEO content had no impact on the color change ability of the films. The results suggested that SPSP-MEO films have potential in the smart packaging of protein-rich foods.

Konjac glucomannan films incorporated pectin-stabilized Mandarin oil emulsions: Structure, properties, and application in fruit preservation

To enhance the water-resistance and antibacterial properties of KGM films, mandarin oil (MO), was directly emulsified by pectin and then dispersed to the KGM matrix. The effect of MO concentration (0, 0.5, 1.0, 1.5, and 2 wt%) on the performance of the film-forming emulsions as well as the emulsion films was investigated. The results revealed that pectin could encapsulate and protect MO, and KGM as film matrix could further contributed to the high stability of the film-forming emulsions. The FT-IR, XRD, and SEM suggested that MO stabilized by pectin was uniformly distributed in the KGM matrix. The compatibility and good interaction between KGM and pectin contributed to highly dense and compact structure. Furthermore, increasing the concentration of MO effectively improved water-resistance, oxygen barrier, and antimicrobial activity of the KGM based films. The 1.5 wt% MO loaded KGM film had the highest tensile strength (72.22 MPa) and water contact angle (θ = 95.73°), reduced the WVP and oxygen permeability by about 25.8 % and 32.8 times, respectively, prolonged the shelf life of strawberries for 8 days. As demonstrated, the 1.5 wt% MO-loaded KGM film has considerable potential for high-performance natural biodegradable active films to ensure food safety and reduce environmental impacts.

Paper-based material with hydrophobic and antimicrobial properties: Advanced packaging materials for food applications

The environmental challenges posed by plastic pollution have prompted the exploration of eco-friendly alternatives to disposable plastic packaging and utensils. Paper-based materials, derived from renewable resources such as wood pulp, non-wood pulp (bamboo pulp, straw pulp, reed pulp, etc.), and recycled paper fibers, are distinguished by their recyclability and biodegradability, making them promising substitutes in the field of plastic food packaging. Despite their merits, challenges like porosity, hydrophilicity, limited barrier properties, and a lack of functionality have restricted their packaging potential. To address these constraints, researchers have introduced antimicrobial agents, hydrophobic substances, and other functional components to improve both physical and functional properties. This enhancement has resulted in notable improvements in food preservation outcomes in real-world scenarios. This paper offers a comprehensive review of recent progress in hydrophobic antimicrobial paper-based materials. In addition to outlining the characteristics and functions of commonly used antimicrobial substances in food packaging, it consolidates the current research landscape and preparation techniques for hydrophobic paper. Furthermore, the paper explores the practical applications of hydrophobic antimicrobial paper-based materials in agricultural produce, meat, and seafood, as well as ready-to-eat food packaging. Finally, challenges in production, application, and recycling processes are outlined to ensure safety and efficacy, and prospects for the future development of antimicrobial hydrophobic paper-based materials are discussed. Overall, the emergence of hydrophobic antimicrobial paper-based materials stands out as a robust alternative to plastic food packaging, offering a compelling solution with superior food preservation capabilities. In the future, paper-based materials with antimicrobial and hydrophobic functionalities are expected to further enhance food safety as promising packaging materials.

Novel chitosan-based smart bio-nanocomposite films incorporating TiO2 nanoparticles for white bread preservation

Chitosan (CS)-based bio-nanocomposite food packaging films were prepared via solvent-casting method by incorporating a unique combination of additives and fillers, including polyvinyl alcohol (PVA), glycerol, Tween 80, castor oil (CO), and nano titanium dioxide (TiO2) in various proportions to enhance film properties. For a comprehensive analysis of the synthesized films, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), tensile testing, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), and UV-vis spectrophotometry were employed. Furthermore, the antimicrobial efficacy of the films against S. aureus, E. coli, and A. niger was examined to assess their potential to preserve food from foodborne pathogens. The results claimed that the inclusion of castor oil and TiO2 nanoparticles considerably improved antimicrobial properties, UV-vis light barrier properties, thermal stability, optical transparency, and mechanical strength of the films, while reducing their water solubility, moisture content, water vapor and oxygen permeability. Based on the overall analysis, CS/PVA/CO/TiO2-0.3 film can be selected as the optimal one for practical applications. Furthermore, the practical application of the optimum film was evaluated using white bread as a model food product. The modified film successfully extended the shelf life of bread to 10 days, surpassing the performance of commercial LDPE packaging (6 days), and showed promising attributes for applications in the food packaging sector. These films exhibit superior antimicrobial properties, improved mechanical strength, and extended shelf life for food products, marking a sustainable and efficient alternative to conventional plastic packaging in both scientific research and industrial applications.

Eco-friendly management strategies of insect pests: long-term performance of rosemary essential oil encapsulated into chitosan and gum Arabic

This study focused on encapsulation of Rosmarinus officinalis essential oil (EO) on chitosan and gum Arabic matrix in various ratios and with varying essential oil concentrations. Additionally, UV/VIS spectroscopy was used to determine cumulative-release profiles. The insecticidal activity was tested against Tribolium castaneum and Oryzaephilus surinamensis, both pests of stored products. In terms of encapsulation efficiency (EE%) and loading capacity (LC%), capsules had EE at 45.8% and LC at 2.31%. Furthermore, many minor compounds were lost after encapsulation, until identifying only 1,8-cineole, α-terpineol, and camphor after 60 d of storage. The fumigant tests demonstrated that encapsulated EO exhibited an effective control against insect pest during storage periods, namely, 30, 45, and 60 d with 99, 66, and 46% mortality for T. castaneum and 100, 84, 82% mortality for O. surinamensis.

Recent progress in PBAT-based films and food packaging applications: A mini-review

Bioplastics are a promising alternative to non-biodegradable plastics. One of these bioplastics, PBAT (polybutylene adipate co-terephthalate), is a polyester-based bioplastic commonly used to manufacture flexible packaging films. PBAT-based films have high flexibility but relatively low strength compared to other bioplastics. The strength of PBAT films can be improved by blending them with other fillers/polymers. Additionally, the functionality of PBAT films can be enhanced by incorporating bioactive functional fillers. The physical and functional properties of PBAT films produced by adding active ingredients provide functionality and are a good alternative to non-degradable petrochemical-based plastics. The PBAT-based functional films protect food and improve packaged foods' quality and life span. Thus, this review provides recent advances in PBAT-based films and their use in active food packaging applications. After briefly describing the different fabrication methods of PBAT films, various important physical and functional properties and biodegradability are comprehensively discussed. PBAT-based active packaging film in real-time food packaging is also briefly covered. Through this review, more attention is expected to be focused on research on PBAT-based biodegradable active food packaging.

Effect of perforated low-density polyethylene films on postharvest quality of avocado fruit

Avocado (Persea americana Mill.) being a climacteric fruit, is very prone to quality deterioration and spoilage due to high metabolic activities which leads to postharvest and economic losses. The purpose of this study was to evaluate the impact of perforated low-density polyethylene (LDPE) packaging films on postharvest quality and shelf life of 'Fuerte' avocado. Fruit were packaged in LDPE plastics (20 and 40 μm) whereas unpackaged fruit were considered as control. Fruit were kept at ambient environments (21 ± 1 °C and 60.0 ± 5% RH) for 12 days and sampled at 4 days interval. The in-pack avocado created a suitable headspace with low O2 and high CO2 concentrations, which yielded improved preservation of postharvest quality and prolonged shelf life of the avocado. Fruit packed in both 20 and 40 μm LDPE films had lower ethylene production and respiration rates, weight loss, firmness loss, preserved fruit size, high pH, titratable acidity, low soluble solid content, sugar:acid ratio, malondialdehyde content and lipoxygenase activity compared to control. Fruit in LDPE films had no symptoms of decay (20 μm) and slight incidence and decay (40 μm) and were markable during shelf life compared to control fruit had severe decay symptoms and were unmarkable at the end of shelf life. These findings indicated that LDPE films were effective in preserving postharvest quality and extending shelf life of avocado fruit.

Sodium alginate/carboxymethyl cellulose films embedded with liposomes encapsulated green tea extract: characterization, controlled release, application

To maintain the freshness of the fruit during storage, sodium alginate/carboxymethyl cellulose films embedded with pH-senstive liposomes encapsulated green tea extract were developed (SA/CMC/TP-Lip). An orthogonal design was used to optimise the preparation of TP-Lip and SA/CMC/TP-Lip was prepared through response surface. The stability of TP-Lip structure was measured. The morphology of SA/CMC/TP-Lip was characterised by SEM, and the mechanical properties and oxidation resistance of films were measured. Special attention was paid to the pH sensitivity of TP-Lip and the improvement of film properties. The zeta potential and encapsulation rate of TP-Lip were -45.85 ± 2.13 mV and 61.45 ± 0.23%. The average release rate of TP encapsulated into TP-Lip at pH 3 was 41.08%, an increase of 23.07% over pH 6 during 12 h. SEM and FTIR showed that TP-Lip was structurally stable and had good compatibility with SA/CMC. Tensile strength was increased by 30.55% and DPPH radical scavenging capacity was increased by 7.16% with the addition of TP-Lip. SA/CMC/TP-Lip is applied to blueberries to reduce their weight loss and improve the loss of freshness of blueberries during storage. Thus, SA/CMC/TP-Lip could provide a new way to extend active packaging materials and maintain fruit freshness during storage.

Essential oils: An eco-friendly alternative for controlling toxigenic fungi in cereal grains

Fungi are widely disseminated in the environment and are major food contaminants, colonizing plant tissues throughout the production chain, from preharvest to postharvest, causing diseases. As a result, grain development and seed germination are affected, reducing grain quality and nutritional value. Some fungal species can also produce mycotoxins, toxic secondary metabolites for vertebrate animals. Natural compounds, such as essential oils, have been used to control fungal diseases in cereal grains due to their antimicrobial activity that may inhibit fungal growth. These compounds have been associated with reduced mycotoxin contamination, primarily related to reducing toxin production by toxigenic fungi. However, little is known about the mechanisms of action of these compounds against mycotoxigenic fungi. In this review, we address important information on the mechanisms of action of essential oils and their antifungal and antimycotoxigenic properties, recent technological strategies for food industry applications, and the potential toxicity of essential oils.

Development of biobased multifunctional films incorporated with essential oils@polydopamine nanocapsules for food preservation applications

A novel multifunctional soy protein isolate-carboxymethyl cellulose (SPI-CMC) based nanocomposite film was successfully prepared by introducing the polydopamine encapsulated essential oils (EOs@PDA) nanocapsules for food packaging. The EOs@PDA nanocapsules possessed smooth spherical morphology with good dispersion, and the particle size was about 283 nm. The influence of EOs@PDA nanocapsules on the physical, chemical and biological properties of EOs@PDA/SPI-CMC nanocomposite film was investigated. The EOs@PDA nanocapsules were crosslinked with SPI-CMC matrix and distributed uniformly in the matrix. The nanocomposite film with 1 wt% nanocapsules (EP/S-C) also showed excellent antioxidant activity (66.6 ± 0.3 % on DPPH and 98.6 ± 0.1 % on ABTS), superior UV-blocking properties (100 %), advanced antibacterial ability against E. coli and S. aureus, favorable biodegradability (>90 %) and relatively low In vitro cytotoxicity. Also, the EP/S-C nanocomposite film displayed potential to extend the shelf life of fresh cut apple slices (>24 h), perishable cherry tomatoes and blueberries (>6 days). The results suggested that the EOs@PDA/SPI-CMC nanocomposite film had a great possibility in the field of biodegradable and antimicrobial materials for food packaging.

One Health Perspectives on Food Safety in Minimally Processed Vegetables and Fruits: From Farm to Fork

While food markets and food production chains are experiencing exponential growth, global attention to food safety is steadily increasing. This is particularly crucial for ready-to-eat products such as fresh-cut salads and fruits, as these items are consumed raw without prior heat treatment, making the presence of pathogenic microorganisms quite frequent. Moreover, many studies on foodborne illnesses associated with these foods often overlook the transmission links from the initial contamination source. The prevention and control of the dissemination of foodborne pathogens should be approached holistically, involving agricultural production, processing, transport, food production, and extending to final consumption, all while adopting a One Health perspective. In this context, our objective is to compile available information on the challenges related to microbiological contamination in minimally handled fruits and vegetables. This includes major reported outbreaks, specific bacterial strains, and associated statistics throughout the production chain. We address the sources of contamination at each stage, along with issues related to food manipulation and disinfection. Additionally, we provide potential solutions to promote a healthier approach to fresh-cut fruits and vegetables. This information will be valuable for both researchers and food producers, particularly those focused on ensuring food safety and quality.

The Extraction and Impact of Essential Oils on Bioactive Films and Food Preservation, with Emphasis on Antioxidant and Antibacterial Activities-A Review

Essential oils, consisting of volatile compounds, are derived from various plant parts and possess antibacterial and antioxidant properties. Certain essential oils are utilized for medicinal purposes and can serve as natural preservatives in food products, replacing synthetic ones. This review describes how essential oils can promote the performance of bioactive films and preserve food through their antioxidant and antibacterial properties. Further, this article emphasizes the antibacterial efficacy of essential oil composite films for food preservation and analyzes their manufacturing processes. These films could be an attractive delivery strategy for improving phenolic stability in foods and the shelf-life of consumable food items. Moreover, this article presents an overview of current knowledge of the extraction of essential oils, their effects on bioactive films and food preservation, as well as the benefits and drawbacks of using them to preserve food products.

Chemical extraction, characterization, and inspection of the antimicrobial and antibiofilm activities of shrimp chitosan against foodborne fungi and bacteria

Nowadays, the exploitation of biopolymers in the industrial sector has become a trend. Chitosan is considered one of the most investigated biopolymers due to its abundance and antibacterial, antifungal, and antibiofilm activities. In this work, chitosan was chemically extracted from shrimp shells. Solutions of HCl 1 M, NaOH 4 M, and NaOH 15 M were used for the demineralization, deproteinization, and deacetylation process, respectively. The utilized methods of characterization (FTIR, 1 H NMR, 13 C NMR, and SEC-MALS) revealed that the obtained chitosan has a moderate degree of deacetylation and low molecular weight (DDA = 74% and Mw = 72.14 kDa). The microdilution method and inoculation of solid medium were carried out to assess the antibiofilm action of chitosan against Staphylococcus aureus, Pseudomonas aeruginosa, Enterococcus hirae, Escherichia coli, Rhizopus sp., and Aspergillus sp. which are known as foodborne microorganisms. Results showed that the produced chitosan at 1 g/L inhibits between 63.44 and 99.75% of the microbial biofilm depending on the tested strains. These promising results confirm the potential deployment of the obtained chitosan in the food industry as a replacement for synthetic antimicrobial agents.

Sonochemical treatment of packaging materials for prolonging fresh produce shelf life

Packaging bags made of polyethylene (PE) were sonochemically coated with edible antibacterial nanoparticles of chitosan (CS). In this work, the nanoparticles (NPs) were deposited on the surface of PE packaging bags by applying sonication waves on an acetic solution of chitosan. The characterization of CS NPs and PE bags was conducted by physicochemical techniques. The results showed that the coated bags had longer freshness than the uncoated ones. Furthermore, the characterization of cucumber, mushroom, and garlic placed into coated and uncoated PE bags was conducted by monitoring various parameters such as mass loss, total soluble solids, pH, and visual inspection. The study revealed that the PE bags coated with CS NPs showed a noticeable result in extending the shelf life of fresh produce. Finally, the antibacterial activity of PE bags was evaluated against various bacterial species. Hence, the PE bags coated with CS NPs could be a promising candidate for elongating the shelf life of packaged fresh produce.

Fabrication, performance, and potential environmental impacts of polysaccharide-based food packaging materials incorporated with phytochemicals: A review

Although food packaging preserves food's quality, it unfortunately contributes to global climate change since the considerable carbon emissions associated with its entire life cycle. Polysaccharide-based packaging materials (PPMs) are promising options to preserve foods, potentially helping the food industry reduce its carbon footprint. PPMs incorporated with phytochemicals hold promise to address this critical issue, keep food fresh and prolong the shelf life. However, phytochemicals' health benefits are impacted by their distinct chemical structures thus the phytochemicals-incorporated PPMs generally exhibit differential performances. PPMs must be thoughtfully formulated to possess adequate physicochemical properties to meet commercial standards. Given this, this review first-time provides a comprehensive review of recent advances in the fabrication of phytochemicals incorporated PPMs. The application performances of phytochemicals-incorporated PPMs for preserving foods, as well as the intelligent monitoring of food quality, are thoroughly introduced. The possible associated environmental impacts and scalability challenges for the commercial application of these PPMs are also methodically assessed. This review seeks to provide comprehensive insights into exploring new avenues to achieve a greener and safer food industry via innovative food packaging materials. This is paramount to preserve not only food shelf life but also the environment, facilitating the eco-friendly development of the food industry.

Nano and Technological Frontiers as a Sustainable Platform for Postharvest Preservation of Berry Fruits

Berries are highly perishable and susceptible to spoilage, resulting in significant food and economic losses. The use of chemicals in traditional postharvest protection techniques can harm both human health and the environment. Consequently, there is an increasing interest in creating environmentally friendly solutions for postharvest protection. This article discusses various approaches, including the use of "green" chemical compounds such as ozone and peracetic acid, biocontrol agents, physical treatments, and modern technologies such as the use of nanostructures and molecular tools. The potential of these alternatives is evaluated in terms of their effect on microbial growth, nutritional value, and physicochemical and sensorial properties of the berries. Moreover, the development of nanotechnology, molecular biology, and artificial intelligence offers a wide range of opportunities to develop formulations using nanostructures, improving the functionality of the coatings by enhancing their physicochemical and antimicrobial properties and providing protection to bioactive compounds. Some challenges remain for their implementation into the food industry such as scale-up and regulatory policies. However, the use of sustainable postharvest protection methods can help to reduce the negative impacts of chemical treatments and improve the availability of safe and quality berries.

Antibacterial Activity of Hexanol Vapor In Vitro and on the Surface of Vegetables

Hexanol is a volatile alcohol and a major component of plant essential oils (EOs). However, the antibacterial activity of hexanol vapor has not been well studied. This study aimed to evaluate the antibacterial activity of hexanol. In this study, seven food-related bacteria were exposed to 1-, 2- or 3-hexanol vapor on agar media to evaluate their growth. Additionally, the total viable counts in three vegetables when exposed to 1-hexanol vapor were measured. The results showed that 1-hexanol exhibited antibacterial effects against Gram-negative bacteria but did not affect Gram-positive bacteria. However, compounds 2- and 3-hexanol did not show antimicrobial activity against any bacteria. For the vegetables, exposure to 1-hexanol vapor decreased the total viable bacterial counts in cabbage and carrot and inhibited bacterial growth in eggplants. In cabbage, 1-hexanol vapor at concentrations over 50 ppm decreased the total viable count within 72 h, and 25 ppm of vapor showed bacteriostatic activity for 168 h. However, 1-hexanol vapor also caused discoloration in cabbage. In summary, 1-hexanol has the potential to act as an antibacterial agent, but further studies are required for practical use. Moreover, the study results may help determine the antimicrobial activity of various EOs in the future.

Characterization and bio-functional performance of chitosan/poly (vinyl alcohol)/trans-cinnamaldehyde ternary biopolymeric films

Bioactive films of chitosan (CS)/polyvinyl alcohol (PVA)/trans-cinnamaldehyde (CIN) were prepared by co-blending, and the impact of varying concentrations (0.5, 1.0 and 1.5 %) of CIN on the physicochemical properties of the ternary films was investigated. The ATR/FT-IR analysis revealed that the bioactive film is modulated by Schiff base (C=N) and hydrogen-bond interactions of CS, PVA, and CIN. Inclusion of CIN into the film improved mechanical properties with tensile strength increased from 0.5 % (68.52 MPa) to 1.5 % (76.95 MPa). The presence of CIN within the CS/PVA film also remarkably affected oxygen permeability and improved light transmittance. Additionally, the water barrier and contact angle properties were improved with increasing CIN content. The morphology of the CIN-containing films appeared non-stratified and dense when observed by SEM and AFM. Moreover, spore germination and in vitro assays confirmed strong antifungal activity of the CIN-containing film against P. italicum (~90 %) and B. cinerea (~85 %). The ternary films also exhibited excellent antioxidant activity, as evidenced by DPPH radical scavenging activity (31.43 %) and ferric reducing power (OD700 nm = 0.172) at the highest CIN concentration tested. Thus, this bioactive CIN films are proposed as a versatile packaging material for the food industry.

Effect of Conventional Preservatives and Essential Oils on the Survival and Growth of Escherichia coli in Vegetable Sauces: A Comparative Study

Essential oils have gained attention as natural alternatives to chemical preservatives in food preservation. However, more information is needed regarding consumer acceptance of essential oils in actual food products. This study aimed to compare the effects of conventional preservatives, heat treatment, and essential oils derived from thyme, oregano, and lemongrass on the survival and growth of pathogenic Escherichia coli in vegetable sauces. The results demonstrated a gradual decrease in pathogen numbers over time, even in untreated samples. On the fifth day of storage, heat treatment, sodium chloride, and acidification using citric acid (pH 3.2) exhibited reductions of 4.4 to 5.3 log CFU/g compared to the untreated control. Among the essential oils tested, lemongrass essential oil at a concentration of 512 mg/kg demonstrated the most remarkable effectiveness, resulting in a reduction of 1.9 log CFU/g compared to the control. Fifteen days after treatment, the control samples exhibited a contamination rate of 6.2 log CFU/g, while E. coli numbers in treated samples with heat, sodium chloride, citric acid (pH 3.2), and lemongrass essential oil (512 mg/kg) were below the detection limits. Additionally, sensory evaluation was conducted to assess the acceptability of the treated samples. The findings provide valuable insights into the potential utilisation of essential oils as natural preservatives in vegetable sauces and their impact on consumer acceptance.

Preparation, Characterization, and Application of pH-Response Color-Changeable Films Based on Pullulan, Cooked Amaranth (Amaranthus tricolor L.) Juice, and Bergamot Essential Oil

Pullulan-based smart packaging films were prepared by mixing cooked amaranth juice and bergamot essential oil. The impact of cooked amaranth juice and bergamot essential oil on the color-changeability, structural characterization, and barrier, antioxidant, mechanical and thermal properties of pullulan-based films was determined. Results showed the cooked amaranth juice contained pH-response color-changing betacyanins. The pullulan films containing cooked amaranth juice were color-changeable in pH 9-12 buffers and in ammonia vapor. The color-changeable property of betacyanins in cooked amaranth juice was unaffected by bergamot essential oils. The inner structure of pullulan films was greatly affected by cooked amaranth juice, forming big and ordered humps in film cross-sections. The crystallinity of pullulan films was improved by the combined addition of cooked amaranth juice and bergamot essential oil. Among the films, the pullulan film containing cooked amaranth juice and 6% bergamot essential oil showed the highest UV-vis light barrier property, antioxidant activity, and tensile strength; while the pullulan film containing cooked amaranth juice and 4% bergamot essential oil showed the highest oxygen barrier property and thermal stability. Moreover, the pullulan films containing cooked amaranth juice were able to monitor the freshness of shrimp by presenting color changes from reddish purple to dark red.

Exploring dynamic changes of fungal cellular components during nanoemulsion treatment by multivariate microRaman imaging

Recently, essential oils (EO) have gained a lot of interest for use as antifungal agent in food and agricultural industry and extensive research is ongoing to understand their mode of action. However, the exact mechanism is not yet elucidated. Here, we integrated spectral unmixing and Raman microspectroscopy imaging to unveil the antifungal mechanism of green tea EO based nanoemulsion (NE) against Magnaporthe oryzae. The dramatic change in protein, lipid, adenine, and guanine bands indicate that NE has a significant impact on the protein, lipid and metabolic processes of purine. The results also demonstrated that the NE treatment caused damage to fungal hyphae by inducing a physical injury leading to cell wall damage and loss of integrity. Our study shows that MCR-ALS (Multivariate Curve Resolution-Alternating Least Squares) and N-FINDR (N-finder algorithm) Raman imaging could serve as a suitable complementary package to the traditional methods, for revealing the antifungal mechanism of action of EO/NE.

Fungicidal activities of Cymbopogon winterianus against anthracnose of banana caused by Colletotrichum musae

The genus Cymbopogon (Poaceae) species have been widely cultivated throughout the world for a wide range of uses in the pharmaceutical and agricultural fields. The current work investigates the fungicidal activities of Cymbopogon winterianus extract (CWE) in controlling the C. musae that caused anthracnose disease in banana fruit. In vitro assay results showed that CWE at 1.5-2.5 gL^-1 concentrations controlled the development of the test pathogen. Mycelial blast, cytoplasmic discharge, and spore edema were noticed when CWE was applied. The Minimum Effective Concentration (MEC) of CWE for the in vivo assay was 1.50 gL^-1 and can be used as a postharvest treatment on banana fruit to deter anthracnose infection. Moreover, no visible phytotoxicity or changes in aroma were observed on banana fruit treated with CWE, even at the highest concentration of 2.5 gL^-1. The GCMS analysis revealed 41 chemical components associated with CWE. The five main compounds were the following: Methyl oleyl ether (40.20%), γ-Sitosterol (15.80%), 6-Methylheptan-3-ol (7.13%), α-Terpineol (5.56%), and n-Pentadecanol (4.05%). The CWE possesses excellent fungicidal effects against C. musae; in the near future, it can be used as an alternative to commercially available traditional fungicides on the market.

Antifungal Mechanism of Cinnamon Essential Oil against Chinese Yam-Derived Aspergillus niger

Chinese yam with damaged outer skin can be easily oxidized and infected by spoilage fungi. To find preservatives in the storage of the Chinese yam, Aspergillus niger 103 was isolated, identified, and determined as the dominant spoilage fungus in Chinese yam according to Koch’s postulates. Then, the strain was used as a model to screen antifungal agents and study antifungal mechanisms in this study. We found that cinnamon essential oil was the best antifungal agent, and the minimum concentration against Aspergillus niger 103 was 25 μg/mL. The storage life of Chinese yam could significantly extend by 27.66 days by spraying with cinnamon essential oil (25 μg/mL). To further explore the antifungal mechanism of cinnamon essential oil against Aspergillus niger 103, alkaline phosphatase activity and electrolyte content in the fungal solution were measured. The alkaline phosphatase activity and electrolyte content of the fungal solution with cinnamon essential oil were significantly increased than those without cinnamon essential oil, which showed that the cinnamon essential oil could destroy the integrity of the cell wall and cell membrane of Aspergillus niger 103, and disrupted cellular homeostasis of Aspergillus niger 103.

Fabrication and characterization of natural polyphenol and ZnO nanoparticles loaded protein-based biopolymer multifunction electrospun nanofiber films, and application in fruit preservation

To extend the shelf life of sweet cherries (Prunus avium L.) and considering the environmental problems caused by traditional packaging materials, novel Zein/Gelatin-proanthocyanidins-zinc oxide nanoparticles (ZE/GE-PC-ZnO) and Zein/Gelatin-gallic acid-zinc oxide nanoparticles (ZE/GE-GA-ZnO) protein-based composite nanofiber films were prepared by electrospinning. According to the results, ZE/GE-PC-ZnO and ZE/GE-GA-ZnO films' contact angles were higher than those of Zein/Gelatin film by 28.91% and 21.27%, and their antioxidant activities were 5 and 9 times higher, respectively. Moreover, ZE/GE-PC-ZnO film showed good inhibitory activity against B. cinerea. On the eleventh day of the cherry packaging test, compared to unwrapped cherries, the losses of weight and firmness of wrapped fruit were reduced by more than 20% and 60%, respectively. Respiration time was delayed by 5 days, and the peak of ethylene release was decreased by nearly half. In conclusion, these two nanofiber films were viable packaging materials that fulfilled global strategies for green development.

A comprehensive review of intelligent packaging for fruits and vegetables: Target responders, classification, applications, and future challenges

Post-harvest fruits and vegetables are extremely susceptible to dramatic and accelerated quality deterioration deriving from their metabolism and adverse environmental influences. Given their vigorous physiological metabolism, monitoring means are lacking due to the extent that unnecessary waste and damage are caused. Numerous intelligent packaging studies have been hitherto carried out to investigate their potential for fruit and vegetable quality monitoring. This state-of-the-art overview begins with recent advances in target metabolites for intelligent packaging of fruits and vegetables. Subsequently, the mechanisms of action between metabolites and packaging materials are presented. In particular, the exact categorization and function of intelligent packaging of fruits and vegetables, are all extensively and comprehensively described. In addition, for the sake of further research in this field, the obstacles that impede the scaling up and commercialization of intelligent packaging for fruits and vegetables are also explored, to present valuable references.

Cross-linked biopolymeric films by citric acid for food packaging and preservation

There is a growing interest in the development of degradable and biopolymeric food packaging films (BFPFs) based on green ingredients and strategies due to their biocompatibility, sustainability, and renewable nature of bio-materials. The performance of BFPFs can be improved either by modifying the biopolymer molecules or by combining them with various additives, including nanomaterials, cross-linkers, bioactive compounds and other polymers. Among them, green cross-linking technology is considered as an effective method to improve the performance of BFPFs; citric acid (CA) is widely used as a natural green cross-linker in different BFPFs. In this study, after an overview on CA chemistry, different types of BFPFs cross-linked by CA have been discussed. In addition, this work summarizes the application of CA cross-linked BFPFs/coatings for food preservation in recent years. The role of CA as a cross-linking agent differs in various types of biopolymers, i.e. polysaccharide-based, protein-based and biopolyester-based biopolymers. Moreover, the cross-linking of CA with different biopolymer molecules is mainly related to the CA content and reaction state; the cross-linking process is significantly influenced by conditions such as temperature and pH. In conclusion, this work shows that CA as a natural green cross-linking agent could improve the performance of different BFPFs and enhance their food preservation capacity.

Electrospun polyvinyl alcohol/chitosan nanofibers incorporated with 1,8-cineole/cyclodextrin inclusion complexes: Characterization, release kinetics and application in strawberry preservation

Development of food packaging systems containing essential oils (EOs) has gained increased attention recently. However, the instability of EOs restricts their application. Therefore, effective encapsulation of EOs is demanded for their protection and controlled release. In this work, 1,8-cineole, the major component in Eucalyptus globulus essential oil, was encapsulated into hydroxypropyl-β-cyclodextrin to form an inclusion complex, which was then incorporated into polyvinyl alcohol and chitosan composite polymer to fabricate nanofibrous film via electrospinning. The film with 40% (w/w) of inclusion complexes showed enhanced barrier and mechanical properties, and the release of 1,8-cineole from the film was sustained and dominated by the non-Fick diffusion. Moreover, this film could extend the shelf life of strawberries to 6 days at 25 ℃. This work suggested dual encapsulation of EOs by cyclodextrin and electrospun nanofibers is an ideal strategy to improve the availability of EOs, and the produced film is promising for food preservation.

Locust bean gum/carboxycellulose nanocrystal coating incorporating ZnO clusters built by the accretion of micro spindles or sheets for strawberries preservation

Two shapes of ZnO clusters constructed by the growth of spindle-like (I-ZnO) and sheet-like (II-ZnO) microparticles added to Locust bean gum/carboxycellulose nanocrystal (LBG/C-CNC) coating for improving properties as the enhancers and antibacterial agents. Subsequently, active LBG/C-CNC/ZnO (LCZ) coatings were evaluated to combat the fruits rot triggered by microorganisms aiming to extend their shelf life. The results showed that II-ZnO clusters with flower-shape enhanced the properties more obviously due to more interaction sites. The oxygen and water vapor permeability of the coating containing 5 % II-ZnO (LCZII-5) decreased from 2.00 and 5.98 × 10^-11 to 0.6 cm³ mm m^-2 day^-1 atm^-1 and 1.85 × 10^-11 g m^-1 s^-1 Pa^-1, respectively. And the antibacterial rate against E. coli and S. aureus could reach more than 75 %. Meanwhile, the tensile strength (TS) increased by 50.95 %. The inhibition rates on strawberries of weight and Vc loss by LCZII-5 coating were 30.64 % and 53.59 %, respectively. More importantly, the coatings could be easily washed off with water in spite of tightly being connected with the surface of the strawberries. As was expected, this study provides a feasible method for preparing novel fruit coatings with an effective preservation.

An Overview on Wood Waste Valorization as Biopolymers and Biocomposites: Definition, Classification, Production, Properties and Applications

Bio-based polymers, obtained from natural biomass, are nowadays considered good candidates for the replacement of traditional fossil-derived plastics. The need for substituting traditional synthetic plastics is mainly driven by many concerns about their detrimental effects on the environment and human health. The most innovative way to produce bioplastics involves the use of raw materials derived from wastes. Raw materials are of vital importance for human and animal health and due to their economic and environmental benefits. Among these, wood waste is gaining popularity as an innovative raw material for biopolymer manufacturing. On the other hand, the use of wastes as a source to produce biopolymers and biocomposites is still under development and the processing methods are currently being studied in order to reach a high reproducibility and thus increase the yield of production. This study therefore aimed to cover the current developments in the classification, manufacturing, performances and fields of application of bio-based polymers, especially focusing on wood waste sources. The work was carried out using both a descriptive and an analytical methodology: first, a description of the state of art as it exists at present was reported, then the available information was analyzed to make a critical evaluation of the results. A second way to employ wood scraps involves their use as bio-reinforcements for composites; therefore, the increase in the mechanical response obtained by the addition of wood waste in different bio-based matrices was explored in this work. Results showed an increase in Young's modulus up to 9 GPa for wood-reinforced PLA and up to 6 GPa for wood-reinforced PHA.

Metabolomics insights into the potential of encapsulated essential oils as multifunctional food additives

Growing consumer concern about foodborne disease outbreaks and health risks associated with chemical additives has propelled the usage of essential oils (EOs) as novel food additives, but are limited by instability. In this regard, a series of EOs nano/micro-capsules have been widely used to enhance their stability and improve food quality. However, classical food quality assessment methods are insufficient to fully characterize the effects of encapsulated EOs on food properties, including physical, biochemical, organoleptic, and microbial changes. Recently, the rapid development of high-throughput sequencing is accelerating the application of metabolomics in food safety and quality analysis. This review seeks to present the most recent achievements in the application of non-targeted metabolomics to identify and quantify the overall metabolite profile associated with food quality, which can guide the development of emerging food preservation technologies. The scientific findings confirm that metabolomics opens up exciting prospects for biomarker screening in food preservation and contributes to an in-depth understanding of the mechanisms of action (MoA) of EOs. Future research should focus on constructing food quality assessment criteria based on multi-omics technologies, which will drive the standardization and commercialization of EOs for food industry applications.

Nanoencapsulation application to prolong postharvest shelf life

This review offers our opinion on current and future trends regarding nanoencapsulation interventions to extend postharvest shelf life of stored grains, fruits, and vegetables. Herein, we considered two major factors influencing postharvest shelf life for comments: aerobic food spoilage microorganisms and stored pests. Nanoemulsions, edible/active coatings, and nanopackaging loading essential oils as antimicrobial, antioxidant, or pesticide showed promising results in prolonged shelf life at room/cold storage without compromising quality, organoleptic properties, and postharvest physiology. Trends with nanoencapsulation using plant-based pesticides as agrochemical-free methods to keep produce fresh longer were commented as potential candidates for prolonging the shelf life of stored grains and fruits at the postharvest stage. Research with potential large-scale feasibility is intensive, but safety assessment is required and remains little explored.

Recent advances in essential oil complex coacervation by efficient physical field technology: A review of enhancing efficient and quality attributes

Although complex coacervation could improve the water solubility, thermal stability, bioavailability, antioxidant activity and antibacterial activity of essential oils (EOs). However, some wall materials (such as proteins and polysaccharides) with water solubility and hydrophobic nature limited their application in complex coacervation. In order to improve the properties of EO complex coacervates, some efficient physical field technology was proposed. This paper summarizes the application and functional properties of EOs in complex coacervates, formation and controlled-release mechanism, as well as functions of EO complex coacervates. In particular, efficient physical field technology as innovative technology, such as high pressure, ultrasound, cold plasma, pulsed electric fields, electrohydrodynamic atomization and microwave technology improved efficient and quality attributes of EO complex coacervates are reviewed. The physical fields could modify the gelling, structural, textural, emulsifying, rheological properties, solubility of wall material (proteins and polysaccharides), which improve the properties of EO complex coacervates. Overall, EOs complex coacervates possess great potential to be used in the food industry, including high bioavailability, excellent antioxidant capacity and gut microbiota in vivo, masking the sensation of off-taste or flavor, favorable antimicrobial capacity.

Antifungal Activities of Essential Oils in Vapor Phase against Botrytis cinerea and Their Potential to Control Postharvest Strawberry Gray Mold

Essential oils (EOs) from aromatic plants seem to have the potential to control several fungal pathogens and food contaminants. Botrytis cinerea is the main strawberry fruit contaminant causing high losses during storage. Here, thirteen EOs applied in the vapor phase were evaluated for their potential to inhibit the growth of three different strains of B. cinerea isolated from strawberry fruits. Eight EOs (lemongrass, litsea, lavender, peppermint, mint, petitgrain, sage, and thyme) were able to completely inhibit the growth of B. cinerea for 7 days when applied at a concentration of 625 μL·L⁻¹. Four EOs with the lowest minimal inhibition concentrations (thyme, peppermint, lemongrass, and litsea) have been tested on strawberry fruits intentionally inoculated by B. cinerea. All four EOs showed high inhibition at a concentration of 250 or 500 μL·L⁻¹, but only peppermint EO was able to completely inhibit B. cinerea lesion development at a concentration of 125 μL·L⁻¹. The sensory evaluation of strawberries treated by EOs at a concentration 125 μL·L⁻¹ resulted in a statistically significant decrease in taste, aftertaste, aroma, and overall quality. Lemongrass and litsea EOs scored better than thyme and peppermint ones, thus forming two viable methods for B. cinerea suppression and the extension of packed strawberries’ shelf life.

Potato starch films by incorporating tea polyphenol and MgO nanoparticles with enhanced physical, functional and preserved properties

Due to the massive environmental pollution caused by synthetic plastic packaging accumulation and contemporary necessities of food packaging materials, the biodegradable and multifunctional bionanocomposite films based on potato starch (PS) incorporating tea polyphenol (TP) and MgO nanoparticles (MgO-NPs) were successfully fabricated by the solution casting method, and their physical and functional properties and application in fruits preservation were systematically investigated. Incorporation of TP and MgO-NPs improved the films' tensile strength, UV light-blocking, hydrophobicity and thermal stability, and decreased their moisture content (from 14.02 % to 11.21 %), water solubility (from 19.57 % to 16.56 %), and water vapor permeability (from 17.32 to 9.07 × 10^-11 g∙m^-1∙s^-1∙Pa^-1). Moreover, the PS/TP/MgO-NPs films exhibited strong antioxidant activity, and remarkable antibacterial activity against Escherichia coli and Staphylococcus aureus with the diameter of inhibition zone of 25.60 mm and 27.50 mm, respectively. SEM, ATR-FTIR and XRD analyses indicated the TP and MgO-NPs were dispersed homogeneously in the PS matrix, and identified the molecular interactions of hydrogen bond, hydrophobic interaction and electrostatic attraction. Biodegradability assessment showed that all the films were rapidly decomposed within ~20 days under simulated environmental conditions. Compared to control, the PS/TP/MgO-NPs film-forming solution coatings were capable of maintaining fruit quality by reducing the change in weight loss, firmness and total soluble solids. Overall, these results suggested that the multifunctional bionanocomposite films could be a potential approach for developing sustainable active food packaging.

Optimized Dynamic Monitoring and Quality Management System for Post-Harvest Matsutake of Different Preservation Packaging in Cold Chain

The quality of Tibetan matsutake drops during cold chain transportation. To extend the shelf life and improve the market value, this study analyzed the matsutake logistics process, and optimized the dynamic monitoring and quality management systems for post-harvest matsutake with different preservation packaging in the cold chain. This system monitored the micro-environmental parameters of the cold chain in real time, and it identified the best preservation method by analyzing the quality change characteristics of the matsutake with different preservation packaging. It was concluded that the matsutake were best preserved under the conditions of modified atmosphere packaging. The data analysis on the collected data verified the performance of the system. Relevant personnel were invited to participate in the system performance analysis and offer optimization suggestions to improve the applicability of the established monitoring system. The optimized model could provide a more effective theoretical reference for the dynamic monitoring and quality management of the system.

Electrospun Nisin-Loaded Poly(ε-caprolactone)-Based Active Food Packaging

Packaging for fresh fruits and vegetables with additional properties such as inhibition of pathogens grown can reduce food waste. With its biodegradability, poly(ε-caprolactone) (PCL) is a good candidate for packaging material, especially in the form of an electrospun membrane. The preparation of nonwoven fabric of PCL loaded with food additive, antimicrobial nisin makes them an active packaging with antispoilage properties. During the investigation of the nonwoven fabric mats, different concentrations of nisin were obtained from the solution of PCL via the electrospinning technique. The obtained active porous PCL loaded with varying concentrations of nisin inhibited the growth of Staphylococcus aureus and Escherichia coli. Packages made of PCL and PCL/nisin fibrous mats demonstrated a prolongation of the fruits’ freshness, improving their shelf life and, consequently, their safety.

Application of the Integrated Supercritical Fluid Extraction–Impregnation Process (SFE-SSI) for Development of Materials with Antiviral Properties

The integrated supercritical fluid extraction–impregnation process (SFE-SSI) was performed to fabricate material with antiviral properties against the herpes simplex virus (HSV). Cotton gauze and starch/chitosan polymer films (SCF) were impregnated with components extracted from Melissa officinalis at 10 MPa and 40 °C using a green medium, supercritical carbon dioxide (scCO2). The influences of the processing mode regarding the flow of the supercritical fluid through the system, and the mass ratio of the plant material and the solid carrier, on the impregnation yield of M. officinalis extract were studied. The results revealed that the introduction of a fresh amount of CO2 into the system enabled the highest impregnation yield of 2.24% for cotton gauze and 8.71% for SCF. The presence of M. officinalis extract on the surface of both impregnated cotton gaze and SCF was confirmed by FTIR and GC analyses after the re-extraction of the impregnated samples. The M. officinalis impregnated materials showed a strong inhibitory effect against Bovine herpesvirus type 1 (BHV-1).

Foaming with scCO2 and Impregnation with Cinnamaldehyde of PLA Nanocomposites for Food Packaging

Microcellular nanocomposite foams functionalized with cinnamaldehyde (Ci) were obtained through two-step supercritical foaming and impregnation processing. PLA nanocomposite foams with different C30B concentrations (1, 2, and 3 wt.%) were obtained by foaming with scCO2 at 25 MPa and 135 °C and impregnated with Ci at 12 MPa and 40 °C. The effect of the C30B content and Ci incorporation on the morphological, structural, thermal, and release properties of the developed foams were investigated. The incorporation of Ci was not influenced by C30B’s addition. The presence of C30B and Ci incorporation reduced the average pore diameter slightly and the crystallinity degree of the foams extensively. Simultaneously, the experimental and theoretical characterization of the Ci release from the PLA nanocomposite foams in EtOH 50% was analyzed. The mechanism of Ci release from the foams was defined as a quasi-Fickian diffusion process that could be successfully described using the Korsmeyer–Peppas model. The active PLA foams presented a higher potential of migration and faster release when compared with that reported in commonly used PLA films, showing that biopolymeric foams could be potentially used as active food packaging to improve the migration of active compounds with low migration potentials in order to improve their biological activity in foods.