A stem-loop like aptasensor for sensitive detection of aflatoxin based on graphene oxide/AuNPs nanocomposite platform

Enhancing milk quality assessment with watermelon (Citrullus lanatus) urease immobilized on VS2-chitosan nanocomposite beads using response surface methodology

An eco-friendly hydrothermal method synthesized VS2 nanosheets. Several spectroscopic and microscopic approaches (TEM) were used to characterize the produced VS2 nanosheet microstructure. VS2, Chitosan, and nanocomposite were used to immobilize watermelon (Citrullus lanatus) urease. Optimization using the Response Surface Methodology and the Box-Behnken design yielded immobilization efficiencies of 65.23 %, 72.52 %, and 87.68 % for chitosan, VS2, and nanocomposite, respectively. The analysis of variance confirmed the mathematical model's validity, enabling additional research. AFM, SEM, FTIR, Fluorescence microscopy, and Cary Eclipse Fluorescence Spectrometer showed urease conjugation to the matrix. During and after immobilization, FTIR spectra showed a dynamic connectivity of chemical processes and bonding. The nanocomposite outperformed VS2 and chitosan in pH and temperature. Chitosan and VS2-immobilized urease were more thermally stable than soluble urease, but the nanocomposite-urease system was even more resilient. The nanocomposite retained 60 % of its residual activity after three months of storage. It retains 91.8 % of its initial activity after 12 reuse cycles. Nanocomposite-immobilized urease measured milk urea at 23.62 mg/dl. This result was compared favorably to the gold standard p-dimethylaminobenzaldehyde spectrophotometric result of 20 mg/dl. The linear range is 5 to 70 mg/dl, with a LOD of 1.07 (±0.05) mg/dl and SD of less than 5 %. The nanocomposite's ksel coefficient for interferents was exceptionally low (ksel < 0.07), indicating urea detection sensitivity. Watermelon urease is suitable for dairy sector applications due to its availability, immobilization on nanocomposite, and reuse.

Development and validation of colorimetric-assisted chemometrics methods based on the localized gold nanoparticles surface plasmon resonance for fast simultaneous estimation of anti-hepatitis C virus drugs in their combined dosage form: A comparative study with HPLC method

The present work describes a developed analytical method based on a colorimetric assay using gold nanoparticles (AuNPs) along with chemometric techniques for the simultaneous estimation of sofosbuvir (SOF) and ledipasvir (LED) in their synthetic mixtures and tablet dosage form. The applied chemometric approaches were continuous wavelet transform (CWT) and least squares support vector machine (LS-SVM). Characterization of AuNPs and AuNPs in combination with the drug was performed by UV-vis spectrophotometer, transmission electron microscopy (TEM), dynamic light scattering (DLS), and Fourier transform infrared (FTIR) spectroscopy. In the CWT method, the zero amplitudes were determined at 427 nm with Daubechies wavelet family for SOF (zero crossing point of LED) and 440 nm with Symlet wavelet family for LED (zero crossing point of SOF) over the concentration range of 7.5-90.0 μg/L and 40.0-100.0 μg/L with coefficients of determination (R2) of 0.9974 and 0.9907 for SOF and LED, respectively. The limit of detection (LOD) and limit of quantification (LOQ) of this method were found to be 7.92, 9.96 μg/L and 12.02, 30.2 μg/L for SOF and LED, respectively. In the LS-SVM model, the mean percentage recovery of SOF and LED in synthetic mixtures was 98.29 % and 99.25 % with root mean square error of 2.392 and 1.034, which were obtained by the optimization of regularization parameter (γ) and width of the function (σ) based on the cross-validation method. The proposed methods were also applied for the determination concentration of SOF and LED in the combined dosage form, recoveries were higher than 95 %, and relative standard deviation (RSD) values were lower than 0.4 %. The achieved results were statistically compared with those obtained from the high-performance liquid chromatography (HPLC) technique for the concurrent estimation of components through one-way analysis of variance (ANOVA), and no significant difference was found between the suggested approaches and the reference one. According to these results, simplicity, high speed, lack of time-consuming process, and cost savings are considerable benefits of colorimetry along with chemometrics methods compared to other ways.

Highly sensitive and label free on-site monitoring immunosensor for detection of Aflatoxin B1 from real samples

Aflatoxin B1 (AF-B1) are toxins secreted by secondary metabolites of molds that have adverse effects on humans and animals resulting in huge economic losses. Here we report on field useable, cost effective and direct electrochemical sensor based on conducting polymer composite electrode, Poly (3,4-ethylenedioxythiophene): polystyrene sulphonic acid (PEDOT-PSS) for label-free detection of AF-B1. Structural and morphological characterization of composite electrodes were carried out using XRD and SEM. We compared two different electroanalytical techniques namely, transient capacitance and differential pulse voltammetry, to select the most prominent technique for analyzing the mycotoxin easily. For direct detection of AF-B1, transient capacitance measurement at 77 and 1000 Hz was employed wherein sensor showed linearity in 18.18-300.0 ng mL-1 range at 77 Hz for AF-B1. Best limit of detection (LOD) for AF-B1 was 55.41 ng mL-1 (369 pM) at 77 Hz with very good repeatability. DPV showed linearity in the range 18.18-342.85 ng mL-1 with LOD 435 pM. For demonstration of application of this sensor directly using minimum sample preparation, AF-B1 sensing has been confirmed successfully using white button mushrooms and okra stored at ambient conditions. Sensor response with real samples suggest usefulness of sensor to monitor stored farm products easily.

Sensitive detection of aflatoxin B1 in foods by aptasensing-based qPCR

In this study, a reproductive switch DNA template was designed using aptasensing principles for the accurate quantification of aflatoxins. The template transformed the aflatoxin molecule into linear DNA of 102 nt. The linear DNA was subjected to a quantitative polymerase chain reaction (qPCR) to determine its initial copy number, which was positively correlated with the aflatoxin concentration. Using aflatoxin B1 (AFB1) as a model, the established method could quantify AFB1 within the range of 10-16-10-11 Mol/mL (detection limit equals 0.03 pg/mL), with a linear correlation coefficient R2 of 0.974. Good anti-interference abilities against common food ingredients and high specificity towards other mycotoxins were demonstrated. The established method was successfully applied for the quantification of AFB1 in complex foods such as soy sauce, milk, yellow wine, and peanut butter. The design of a reproductive switch template introduces a novel approach for the sensitive detection of small-molecule toxicants in foods.

A novel Recjf Exo signal amplification strategy based on bioinformatics-assisted truncated aptamer for efficient fluorescence detection of AFB1

Aflatoxin B1 (AFB1) is a typical mycotoxin that signifacntly endangers public health and economy. In this study, we systematically studied the interaction of aptamers with AFB1 using circular dichroism, molecular dynamics, molecular docking, and fluorescence analysis. The truncated sequence aptamers were screened using molecular docking. We successfully obtained the AFB1 aptamer with higher affinity and its truncated form was enhanced by 5.2-fold compared to the initial AFB1 aptamer. In addition, for rapid detection of AFB1, we designed a fluorescent nano-adaptor sensing platform using RecJf exonuclease signal amplification strategy based on the optimal aptamer. The aptasensor showed satisfactory sensitivity towards AFB1 with a linear detection range of 1-400 ng/mL and a detection limit of 0.57 ng/mL. The aptasensor was successfully applied to the determination of AFB1 in soybean oil and corn oil with recoveries of 91.02 %-106.59 % and 87.39 %-110.61 %, respectively. The successful application of the AFB1 aptasensor, developed through bioinformatics truncation of the aptamer, provides a novel approach to creating a cost-effective, eco-friendly, and rapid aptamer sensing platform.

Nanocellulose-graphene composites: Preparation and applications in flexible electronics

In recent years, the pursuit of high-performance nano-flexible electronic composites has led researchers to focus on nanocellulose-graphene composites. Nanocellulose has garnered widespread interest due to its exceptional properties and unique structure, such as renewability, biodegradability, and biocompatibility. However, nanocellulose materials are deficient in electrical conductivity, which limits their applications in flexible electronics. On the other hand, graphene boasts remarkable properties, including a high specific surface area, robust mechanical strength, and high electrical conductivity, making it a promising carbon-based nanomaterial. Consequently, research efforts have intensified in exploring the preparation of graphene-nanocellulose flexible electronic composites. Although there have been studies on the application of nanocellulose and graphene, there is still a lack of comprehensive information on the application of nanocellulose/graphene in flexible electronic composites. This review examines the recent developments in nanocellulose/graphene flexible electronic composites and their applications. In this review, the preparation of nanocellulose/graphene flexible electronic composites from three aspects: composite films, aerogels, and hydrogels are first introduced. Next, the recent applications of nanocellulose/graphene flexible electronic composites were summarized including sensors, supercapacitors, and electromagnetic shielding. Finally, the challenges and future directions in this emerging field was discussed.

Dual-mode transfer response based on electrochemical and fluorescence signals for the detection of amyloid-beta oligomers (AβO)

An aptamer sensor has been developed utilizing a dual-mode and stimuli-responsive strategy for quantitative detection of AβO (amyloid-beta oligomers) through simultaneous electrochemical and fluorescence detection. To achieve this, we employed UIO-66-NH2 as a carrier container to load MB (Methylene Blue), and Fe3O4 MNPs (iron oxide magnetic nanoparticles) with aptamer (ssDNA-Fe3O4 MNPs) fixed on their surface for biological gating. The ssDNA-Fe3O4 MNPs were immobilized onto the surface of UIO-66-NH2 through hydrogen bonding between the aptamer and the -NH2 group on the surface of UIO-66-NH2, thereby encapsulating MB and forming ssDNA-Fe3O4@MB@UIO-66-NH2. During the detection of AβO, the aptamer selectively reacted with AβO to form the AβO-ssDNA-Fe3O4 complex, leading to its detachment from the surface of UIO-66-NH2. This detachment facilitated the release of MB, enabling its electrochemical detection. Simultaneously, the AβO-ssDNA-Fe3O4 complex was efficiently collected and separated using a magnet after leaving the container's surface. Furthermore, the addition of NaOH facilitated the disconnection of biotin modifications at the 3' end of the aptamer from the avidin modifications on the Fe3O4 MNPs. Consequently, the aptamer detached from the surface of Fe3O4 MNPs, resulting in the restoration of fluorescence intensity of FAM (fluorescein-5'-carboxamidite) modified at its 5' end for fluorescence detection. The dual-mode sensor exhibited significantly enhanced differential pulse voltammetry signals and fluorescence intensity compared to those in the absence of AβO. The sensor demonstrated a wide detection range of 10 fM to 10 μM, with a detection limit of 3.4 fM. It displayed excellent performance in detecting actual samples and holds promising prospects for early diagnosis of Alzheimer's disease.

Fluorescent nanostructured carbon dot-aptasensor for chlorpyrifos detection: Elucidating the interaction mechanism for an environmentally hazardous pollutant

Chlorpyrifos (CPF) is a commonly used insecticide found in many water sources and is related to several health and environmental effects. Biosensors based on aptamers (single-stranded nucleic acid oligonucleotides) are promising alternatives to achieve the detection of CPF and other pesticides in natural waters. However, several challenges need to be addressed to promote the real application of functional aptasensing devices. In this work, an ssDNA aptamer (S1) is combined with carbon quantum dots (CD) and graphene oxide (GO) to produce a stable fluorescent aptasensor characterized through spectrophotometric and electrophoretic techniques. For a deeper understanding of the system, the mechanism of molecular interaction was studied through docking modeling using free bioinformatic tools like HDOCK, showing that the stem-loops and the higher guanine (G) content are crucial for better interaction. The model also suggests the possibility of generating a truncated aptamer to improve the binding affinity. The biosensor was evaluated for CPF detection, showing a low LOD of 0.01 μg L-1 and good specificity in tap water, even compared to other organophosphates pesticides (OPs) like profenofos. Finally, the recovery of the proposed aptasensor was evaluated in some natural water using spiked samples and compared with UPLC MS-MS chromatography as the gold standard, showing a good recovery above 2.85 nM and evidencing the need of protecting ssDNA aptamers from an erratic interaction with the aromatic groups of dissolved organic matter (humic substances). This work paves the way for a better aptasensors design and the on-site implementation of novel devices for environmental monitoring.

Development and analysis of a universal label-free micro/nano component for three-channel detection of silver ions, mercury ions, and tetracycline

In this paper, an enzyme-free and label-free fluorescent nanomodule is proposed for rapid, simple and sensitive detection of Ag+, Hg2+ and tetracycline (TC). The strategy is cleverly designed to enable multiple-purpose detection with as little as 31 nt of ssDNA. Both the embedded dye SYBR Green I and the nanomaterial graphene oxide (GO) are able to distinguish single-stranded DNA from double-stranded DNA; thus, the combination of the two instead of using traditional molecular beacon (MB)-labeled fluorophores and quencher groups can effectively reduce the cost of experiments while efficiently reducing the background noise. Performance testing experiments confirmed the stability and selectivity of the platform; the limits of detection (LODs) of Ag+ and Hg2+ were 1.41 nM and 1.79 nM, respectively, and the detection range were within the WHO standards. In addition, only some base sequences in the flexible functional domain of the nanoloop needed to be programmed to build a universal platform, which was feasible using TC as a target. Therefore, the designed nanomodule has the potential to detect various types of targets, such as antibiotics, proteins, and target genes, and has broad application prospects in environmental monitoring, food testing, and disease diagnosis.

Highly hydrostable and flexible opal photonic crystal film for enhanced up-conversion fluorescence sensor of COVID-19 antibody

Efficient detection of related markers is significant for the early screening of COVID-19. Near infrared (NIR) light excited up-conversion fluorescence probes are ideal for biosensing but limited by the low luminescence efficiency. In this work, a novel highly stable opal photonic crystal (OPC) structure was designed to provide an OPC effect for up-conversion fluorescence enhancement, and sensitive Novel Coronavirus IgG up-conversion FRET-based sensor was further constructed. For the problems of water stability and mechanical stability of polymer OPC which cannot be solved for a long time, polymer spray combined with a flipped OPC film strategy is presented. Fragmented size OPC film was firmly fixed by polymer modification layer, which gave large size OPC film great water stability, mechanical stability and bending performance without affecting the fluorescence enhancement property. On this basis, the up-conversion emission intensity was enhanced significantly, and fluorescence resonant energy transfer (FRET) based Novel Coronavirus IgG antibody sensor was constructed. Monolayer up-conversion nanoparticles (UCNPs) on the surface of the polydopamine (PDA)/OPC film can make the fluorescent signal more sensitive, and effectively reduce the detection limit. The test device integrating NIR excitation and mobile phone realized the visual fast detection, showing remarkable sensing performance for COVID-19 antibodies with the limit of detection (LOD) of 0.1 ng mL-1. This detection platform will provide a more effective tool for early detection of the novel coronavirus.

Nanoscale Materials Applying for the Detection of Mycotoxins in Foods

Trace amounts of mycotoxins in food matrices have caused a very serious problem of food safety and have attracted widespread attention. Developing accurate, sensitive, rapid mycotoxin detection and control strategies adapted to the complex matrices of food is crucial for in safeguarding public health. With the continuous development of nanotechnology and materials science, various nanoscale materials have been developed for the purification of complex food matrices or for providing response signals to achieve the accurate and rapid detection of various mycotoxins in food products. This article reviews and summarizes recent research (from 2018 to 2023) on new strategies and methods for the accurate or rapid detection of mold toxins in food samples using nanoscale materials. It places particular emphasis on outlining the characteristics of various nanoscale or nanostructural materials and their roles in the process of detecting mycotoxins. The aim of this paper is to promote the in-depth research and application of various nanoscale or structured materials and to provide guidance and reference for the development of strategies for the detection and control of mycotoxin contamination in complex matrices of food.

Bio-barcode assay: A useful technology for ultrasensitive and logic-controlled specific detection in food safety: A review

Food safety is one of the greatest public health challenges. Developing ultrasensitive detection methods for analytes at ultra-trace levels is, therefore, essential. In recent years, the bio-barcode assay (BCA) has emerged as an effective ultrasensitive detection strategy that is based on the indirect amplification of various DNA probes. This review systematically summarizes the progress of fluorescence, PCR, and colorimetry-based BCA methods for the detection of various contaminants, including pathogenic bacteria, toxins, pesticides, antibiotics, and other chemical substances in food in over 120 research papers. Current challenges, including long experimental times and strict storage conditions, and the prospects for the application of BCA in biomedicine and environmental analyses, have also been discussed herein.

Construction of a SERS platform for sensitive detection of aflatoxin B1 based on CRISPR strategy

Aflatoxin B1, a pathogen in the aflatoxin family, has attracted much attention due to the harmfulness in production and life. However, the common methods like high performance liquid chromatography used for detection of AFB1 have deficiency in complicated pretreatment processes, and the purification effect is not ideal. Herein, a SERS platform based on CRISPR strategy was designed for sensitive detection of AFB1. By synthesizing core-shell nanoparticles embedded with Raman silent region dye molecules, Prussian blue (PB), the detection of the sensor reduced background interference and the SERS signal was calibrated. At the same time, the high-efficiency reverse cleavage activity of cas12a was used to convert non-nucleic acid targets into nucleic acid, so as to achieve the effect of sensitive detection of AFB1 with a detection limit of 3.55  pg/mL. This study provides a new thought for SERS detection of non-nucleic acid targets in the future.

Single-Walled Carbon Nanohorn-Based Fluorescence Energy Resonance Transfer Aptasensor Platform for the Detection of Aflatoxin B1

Aflatoxin B1 (AFB1) is one of the most contaminated fungal toxins worldwide and is prone to cause serious economic losses, food insecurity, and health hazards to humans. The rapid, on-site, and economical method for AFB1 detection is need of the day. In this study, an AFB1 aptamer (AFB1-Apt) sensing platform was established for the detection of AFB1. Fluorescent moiety (FAM)-modified aptamers were used for fluorescence response and quenching, based on the adsorption quenching function of single-walled carbon nanohorns (SWCNHs). Basically, in our constructed sensing platform, the AFB1 specifically binds to AFB1-Apt, making a stable complex. This complex with fluorophore resists to be adsorbed by SWCNHs, thus prevent SWCNHs from quenching of fluorscence, resulting in a fluorescence response. This designed sensing strategy was highly selective with a good linear response in the range of 10-100 ng/mL and a low detection limit of 4.1 ng/mL. The practicality of this sensing strategy was verified by using successful spiking experiments on real samples of soybean oil and comparison with the enzyme-linked immunosorbent assay (ELISA) method.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

A novel multimode biosensor for sensitive detection of AFB1 in food based on Mxenes nano enzymes

In this work, Ti₃C₂ nano-enzymes (Ti₃C₂ NEs) materials with simulated peroxidase activity and fluorescence quenching properties were prepared. Then Ti₃C₂ NEs was functionalized using 6-carboxyfluorescein (FAM) labeled Aflatoxin B₁ (AFB₁) aptamers to construct a novel multimode nano enzyme biosensor for the detection of AFB₁ in peanuts. Based on the fluorescence quenching characteristics and the superior simulated peroxidase activity of Ti₃C₂ NE_S and the specific binding of the aptamer to AFB₁, the sensitive and rapid fluorescence/colorimetric/smart phone detection of AFB₁ have been achieved, with detection limits of 0.09 ng mL^-1, 0.61 ng mL^-1 and 0.96 ng mL^-1, respectively. The analytical method provided can not only detect AFB₁ in multiple modes, but also has a wider detection range, lower limit of detection (LOD) and better recovery rate, and can achieve on-site accurate detection of AFB₁ content in peanuts, which has great application potential in the field of food quality testing.

A dual-modal biosensor coupling cooperative catalysis strategy for sensitive detection of AFB1 in agri-products

Herein, the cooperative catalysis effect between nanocomposite (AgPd NPs/POD-M/PEI-rGO) and horseradish peroxidase (HRP) was applied for the fast and sensitive detection of aflatoxin B1 (AFB₁). Upon specific and competitive binding of HRP@DNA and AFB₁ to cDNA, the working electrode presented different catalytic capacities for supporting electrolytes (TMB and H₂O₂). In the redox mechanism of TMB and H₂O₂, HRP and nanocomposite effectively catalyzed the oxidization of TMB to form the one-electron oxidation intermediate TMB+, and contributed the electrical signals and absorbance signals. Electrochemistry and colorimetric analyses were successfully realized for AFB₁ detection with 0.2 pg/mL and 8 pg/mL of detection limits, respectively, which is much lower than that of traditional HPLC methods. Overall, this method had significant reliability and sensitivity, offering a promising potential for conveniently evaluating the quality of agri-products polluted with AFB₁. Moreover, this approach provides a new idea for fast and accurate detection of mycotoxin.

Paper-based colorimetric detection of COVID-19 using aptasenor based on biomimetic peroxidase like activity of ChF/ZnO/CNT nano-hybrid

Corona Virus Disease 2019 (COVID-19) as the infectious disease caused the pandemic disease around the world through infection by SARS-CoV-2 virus. The common diagnosis approach is Quantitative RT-PCR (qRT-PCR) which is time consuming and labor intensive. In the present study a novel colorimetric aptasensor was developed based on intrinsic catalytic activity of chitosan film embedded with ZnO/CNT (ChF/ZnO/CNT) on 3,3',5,5'-tetramethylbenzidine (TMB) substrate. The main nanocomposite platform was constructed and functionalized with specific COVID-19 aptamer. The construction subjected with TMB substrate and H₂O₂ in the presence of different concentration of COVID-19 virus. Separation of aptamer after binding with virus particles declined the nanozyme activity. Upon addition of virus concentration, the peroxidase like activity of developed platform and colorimetric signals of oxidized TMB decreased gradually. Under optimal conditions the nanozyme could detect the virus in the linear range of 1-500 pg mL and LOD of 0.05 pg mL. Also, a paper-based platform was used for set up the strategy on applicable device. The paper-based strategy showed a linear range between 50 and 500 pg mL with LOD of 8 pg mL. The applied paper based colorimetric strategy showed reliable results for sensitive and selective detection of COVID-19 virus with the cost-effective approach.

Ultrasensitive electrochemical aptasensor with Nafion-stabilized f-MWCNTs as signal enhancers for OTA detection

In this study, an ultrasensitive electrochemical (EC) aptasensor with Nafion-stabilized functionalized multi-walled carbon nanotubes (f-MWCNTs) as signal enhancers was established for ochratoxin A (OTA) determination. Herein, f-MWCNTs were prepared through functionalization with nitric acid. The incorporation of Nafion promoted a good dispersion of f-MWCNTs and prevented their leaching on the electrode, making a robust stability of the aptasensor. The Nafion-f-MWCNTs composites were used as the sensing substrates to largely enhance the electroactive surface area and the conductivity of the electrode, realizing a significant signal amplification. Carboxyl groups on the surface of f-MWCNTs readily exposed from Nafion membrane to couple with streptavidin, facilitating the immobilization of biotinylated aptamers to achieve selective recognition towards OTA. When OTA existed, aptamers preferentially combined with it, causing a noticeable decline in the current response. Under optimum conditions, a good linear relationship between the current changes and the logarithm of OTA concentration was observed from 0.005 ng/mL to 10 ng/mL, with a limit of detection low to 1 pg/mL for OTA. The specific, sensitive, and reproducible aptasensor succeeded in application in malt samples, confirming a great promise for more contaminants and providing a universal platform in complex matrices by simply replacing the corresponding aptamers.

Melamine-Ag with dual functions of electrochemiluminescence luminophore and coreactant accelerators: Construction of MIP/M-Ag@MoS2-QDs sensing platform for specific detection of thiabendazole

A novel self-enhancement molecularly imprinted electrochemiluminescence (ECL) sensor (MIP/M-Ag@MoS₂-QDs/GCE) was constructed to detect thiabendazole (TBZ) in food. Melamine was used as template to chelate Ag⁺ to prepare composite nanomaterials (M-Ag). M-Ag possesses both ECL properties and coreactant catalytic properties, which can realize the self-enhancement of ECL luminophore. MoS₂-QDs with excellent edge activity and electrochemical reaction catalytic activity were used to accelerate the reaction rate of the microsystem and further enhance the ECL intensity. The specific detection method of TBZ was established by investigating the ECL response mechanism and specific recognition mechanism of MIP/M-Ag@MoS₂-QDs/GCE. The ECL intensity was proportioned to the lg C_(TBZ) in the linear range 5 × 10^-8 mol L^-1-5 × 10^-5 mol L^-1 with a limit detection of 1.42 × 10^-8 mol L^-1. The satisfactory recovery rate (83.57%-101.03%) was obtained in sample analysis, which was in good agreement with the analysis result of HPLC.

Synthesis, characterization, and assessment of chitosan-nanomatrix enriched with antifungal formulation against biodeterioration of active ingredients of selected herbal raw materials

Aflatoxin B₁ (AFB₁), a potent natural group 1 carcinogen produced by Aspergillus flavus is considered an unavoidable toxic contaminant of herbal raw materials, which often deteriorates their active ingredients making them less effective and hazardous during their formulation in herbal drugs. The present investigation reports the antifungal (0.5 μl/ml) and AFB₁ inhibitory (0.4 μl/ml) effects of the developed formulation CIM based on a mixture of essential oils (Carum carvi, and Illicium verum), and methyl anthranilate using mathematical modeling. The insight into the mechanism of action has also been explored using biochemical, molecular docking, and RT-PCR. Further, the nanoencapsulation of CIM (Ne-CIM) was prepared using a green facile synthesis of chitosan-based nanomatrix and characterized by Dynamic light scattering (DLS), Fourier transform-infrared, (FTIR), and X-ray diffraction analysis (XRD). The in-situ results showed that at MIC doses Ne-CIM effectively controls the A. flavus (81.25-89.57 %), AFB₁ contamination (100 %), and protects the active ingredients deterioration of Piper nigrum, P. longum, Andrographis paniculata, Silybum marianum, and Withania somnifera caused by toxigenic species of A. flavus without affecting their sensory properties. Hence, Ne-CIM could be used as a green chemical agent to protect the biodeterioration of active ingredients of herbal raw materials caused by toxigenic species of A. flavus.

A fluorescence immunoassay based on GSH destroying MnO2@QDs for the simultaneous ultrasensitive detection of four mycotoxins in cereals

A novel fluorescence immunoassay based on MnO₂ nanoflowers loading multicolor quantum dots and glutathione destroying MnO₂ nanoflowers to release quantum dots combined with magnetic separation is developed for rapid, ultra-sensitive, and simultaneous quantitative detection of ochratoxin A, aflatoxin B₁, fumonisin B₁, and zearalenone in cereal samples. The test linear range of assay is from 0.001 to 200 μg L^-1. The limit of detection for ochratoxin A, aflatoxin B₁, fumonisin B₁, and zearalenone is 0.0001 μg L^-1, 0.0001 μg L^-1, 0.0003 μg L^-1, and 0.0001 μg L^-1, respectively. The simultaneous detection of four mycotoxins can be achieve within 30 min. The test results of four mycotoxins in the incurred corn, rice, and oat samples have been confirmed by ultra-performance liquid chromatography tandem mass spectrometry, the differences between results are considered no significantly different (p > 0.05). This multiplexed test scheme has provided a potential analysis strategy for multiple food risk factors.

FRET cascade miRNA addition probe from non-crosstalk DNA photonic wire assisted with clustering algorithm for early diagnosis of acute myocardial infarction

Early and accurate diagnosis of acute myocardial infarction (AMI) can significantly reduce patient mortality. A variety of miRNAs are found to dysregulate in AMI patients, but the up- or down-regulation of a specific miRNA may not be evident in the early stage, making it difficult to achieve accurate diagnosis. Here, proposing the design that DNA photonic wire (PW) with no spectral crosstalk would make an excellent template for miRNA conjoint analysis, we report the construction of a miRNA addition probe for the additive analysis of two up-regulated miRNAs (miR-133a and miR-208a) for early diagnosis of AMI in clinical serum samples. A three-dye non-crosstalk DNA PW is built to form the two-step fluorescence resonance energy transfer (FRET) cascade system, in which three paths can blocking the FRET cascade for separate or additive analysis of the two miRNAs. K-Means clustering algorithm is further utilized to classify the output signals of the miRNA addition probe, achieving a 100% accurate diagnosis of early AMI in both the training (n = 40) and validation (n = 19) cohorts of clinical serum samples.

CDs-Peroxyfluor Conjugation for Ratiometric Fluorescence Detection of Glucose and Shortening Its Detection Time from Reaction Dynamic Perspective

A ratiometric fluorescence probe based on the conjugation of peroxyfluor-NHS (PF) and carbon dots (CDs) was designed for selective and rapid detection of glucose. When glucose was catalytically oxidized by glucose oxidase (GOx), the product H₂O₂ would react with colorless and non-fluorescent peroxyfluor moiety to give the colored and fluorescent fluorescein moiety which would absorb the energy of CDs emission at 450 nm due to the Förster Resonance Energy Transfer (FRET) and generate a new emission peak at 517 nm. The reaction between PF and H₂O₂ was slow with a rate constant of about 2.7 × 10^-4 s^-1 under pseudo-first-order conditions (1 uM PF, 1 mM H₂O₂), which was unconducive to rapid detection. Given this, a short time detection method was proposed by studying the kinetics of the reaction between PF and H₂O₂. In this method, the detection time was fixed at three minutes. The linear detection of glucose could be well realized even if the reaction was partially done. As glucose concentration increased from 0.05 mM to 5 mM, the fluorescence intensity ratio (I₅₁₇/I₄₅₀) after 3 minutes' reaction of CDs-PF and glucose oxidation products changed linearly from 0.269 to 1.127 with the limit of detection (LOD) of 17.19 μM. In addition, the applicability of the probe in blood glucose detection was verified.

Flexible Label-Free Platinum and Bio-PET-Based Immunosensor for the Detection of SARS-CoV-2

The demand for new devices that enable the detection of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) at a relatively low cost and that are fast and feasible to be used as point-of-care is required overtime on a large scale. In this sense, the use of sustainable materials, for example, the bio-based poly (ethylene terephthalate) (Bio-PET) can be an alternative to current standard diagnostics. In this work, we present a flexible disposable printed electrode based on a platinum thin film on Bio-PET as a substrate for the development of a sensor and immunosensor for the monitoring of COVID-19 biomarkers, by the detection of L-cysteine and the SARS-CoV-2 spike protein, respectively. The electrode was applied in conjunction with 3D printing technology to generate a portable and easy-to-analyze device with a low sample volume. For the L-cysteine determination, chronoamperometry was used, which achieved two linear dynamic ranges (LDR) of 3.98-39.0 μmol L^-1 and 39.0-145 μmol L^-1, and a limit of detection (LOD) of 0.70 μmol L^-1. The detection of the SARS-CoV-2 spike protein was achieved by both square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) by a label-free immunosensor, using potassium ferro-ferricyanide solution as the electrochemical probe. An LDR of 0.70-7.0 and 1.0-30 pmol L^-1, with an LOD of 0.70 and 1.0 pmol L^-1 were obtained by SWV and EIS, respectively. As a proof of concept, the immunosensor was successfully applied for the detection of the SARS-CoV-2 spike protein in enriched synthetic saliva samples, which demonstrates the potential of using the proposed sensor as an alternative platform for the diagnosis of COVID-19 in the future.

Gold Nanoparticles as a Biosensor for Cancer Biomarker Determination

Molecular biology applications based on gold nanotechnology have revolutionary impacts, especially in diagnosing and treating molecular and cellular levels. The combination of plasmonic resonance, biochemistry, and optoelectronic engineering has increased the detection of molecules and the possibility of atoms. These advantages have brought medical research to the cellular level for application potential. Many research groups are working towards this. The superior analytical properties of gold nanoparticles can not only be used as an effective drug screening instrument for gene sequencing in new drug development but also as an essential tool for detecting physiological functions, such as blood glucose, antigen-antibody analysis, etc. The review introduces the principles of biomedical sensing systems, the principles of nanomaterial analysis applied to biomedicine at home and abroad, and the chemical surface modification of various gold nanoparticles.

Electrochemical Aptasensor Based on Au Nanoparticles Decorated Porous Carbon Derived from Metal-Organic Frameworks for Ultrasensitive Detection of Chloramphenicol

A facile and sensitive electrochemical aptamer sensor (aptasensor) based on Au nanoparticles-decorated porous carbon (AuNPs/PC) composite was developed for the efficient determination of the antibiotic drug chloramphenicol (CAP). AuNPs modified metal-organic framework (AuNPs/ZIF-8) is applied as a precursor to synthesize the porous carbon with homogeneous AuNPs distribution through a direct carbonization step under nitrogen atmosphere. The as-synthesized AuNPs/PC exhibits high surface area and improved conductivity. Moreover, the loading AuNPs could enhance the attachment of the aptamers on the surface of electrode through the Au–S bond. When added to CAP, poorly conductive aptamer-CAP complexes are formed on the sensor surface, which increases the hindrance to electron transfer resulting in a decrease in electrochemical signal. Based on this mechanism, the developed CAP aptasensor represents a wide linear detection range of 0.1 pM to 100 nM with a low detection limit of 0.03 pM (S/N = 3). In addition, the proposed aptasensor was employed for the analysis of CAP in honey samples and provided satisfactory recovery.