Use of alginate- and gellan-based coatings for improving barrier, texture and nutritional properties of fresh-cut papaya

Control of Browning, Enzyme Activity, and Quality in Stored Fresh-cut Fruit Salads through Chitosan Coating Enriched with Bergamot Juice Powder

In this study, fresh-cut fruit salads composed of apples, pears, kiwis, and pineapples were stored at +4 °C for 18 days under distinct conditions: non-coated (NC), chitosan-coated (CH), and bergamot juice powder extract-enriched chitosan-coated (CHBE). Storage endpoint decay percentages were as follows: NC group: 100%, CH group: 26.67-53.3%, CHBE group: 13.33-26.67%. CHBE had the highest moisture content (87.05-89.64%), soluble solids (12.40-13.26%), and chroma values (2.35-6.60). CHBE and NC groups had 2.10% and 6.61% weight loss, respectively. The NC group had the highest polyphenol oxidase activity (19.48 U mL-1) and browning index (0.70 A420/g); CH group: 0.85 U mL-1, 0.35 A420/g; CHBE group: 0.57 U mL-1, 0.27 A420/g. CHBE showed a titratable acidity of 1.33% and pH 3.73 post-storage, impeding microbial proliferation with the lowest counts (2.30-3.24 log CFU g-1). The microbial suitability of the NC group diminished after day 6, with an overall preference score of 1.00. Conversely, the CH and CHBE groups scored 3.15 and 4.56, highlighting the coatings' effectiveness. Bergamot juice powder extract further enhanced this, mitigating browning and enhancing quality. Results reveal tailored coatings' potential to extend shelf life, improve quality, and enhance fruit salads' acceptability. This study underscores the importance of edible coatings in addressing preservation challenges, emphasizing their role in enhancing food quality and consumer acceptability. Incorporating edible coatings is pivotal in mitigating deterioration issues and ensuring the overall success of fresh-cut fruit products in the market.

Advances in formulation, functionality, and application of edible coatings on fresh produce and fresh-cut products: A review

With the increasing population of the world food demand is also increasing but unfortunately, many countries in the world are lacking suitable and economical postharvest preservation techniques to minimize increasing postharvest losses. To ensure food security advanced production technologies, distribution systems and minimum losses should be ensured to give accessibility of food to all population groups. Innovative preservation techniques should be adopted by the agriculture sector to meet intercontinental distribution and demand for fresh produce. The application of the edible coating is a novel technique in postharvest preservation due to its simple application, ecofriendly nature, and effectiveness. Edible coatings can also improve the quality and safety aspects of fresh produce and thus extends shelf life. This review aimed to update information about recent advances in edible coating formulation and application mainly on fresh-cut /minimally processed fruits and vegetables. This information will be helpful for processors to select the best coating material and its effective concentration for different fresh and minimal processed vegetables.

Effect of Composite Chitosan/Sodium Alginate Gel Coatings on the Quality of Fresh-Cut Purple-Flesh Sweet Potato

In this study, single-layer coating using chitosan (Ch) and sodium alginate (SA) solutions and their gel coating (ChCSA) formed by layer-by-layer (LbL) electrostatic deposition using calcium chloride (C) as a cross linking agent were prepared to improve storage qualities and shelf-life of fresh-cut purple-flesh sweet potatoes (PFSP). The preservative effects of single-layer coating in comparison with LbL on the quality parameters of fresh-cut PFSP, including color change, weight loss, firmness, microbial analysis, CO2 production, pH, solid content, total anthocyanin content (TAC), and total phenolic content (TPC) were evaluated during 16 days of storage at 5 °C. Uncoated samples were applicable as a control. The result established the effectiveness of coating in reducing microbial proliferation (~2 times), color changes (~3 times), and weight loss (~4 times) with negligible firmness losses after the storage period. In addition, TAC and TPC were better retained in the coated samples than in the uncoated samples. In contrast, quality deterioration was observed in the uncoated fresh cuts, which progressed with storage time. Relatively, gel-coating ChCSA showed superior effects in preserving the quality of fresh-cut PFSP and could be suggested as a commercial method for preserving fresh-cut purple-flesh sweet potato and other similar roots.

A Review of Essential Oils as Antimicrobials in Foods with Special Emphasis on Fresh Produce

ABSTRACT

Consumer safety concerns over established fresh produce washing methods and the demand for organic and clean-label food has led to the exploration of novel methods of produce sanitization. Essential oils (EOs), which are extracted from plants, have potential as clean-label sanitizers because they are naturally derived and act as antimicrobials and antioxidants. In this review, the antimicrobial effects of EOs are explored individually and in combination, as emulsions, combined with existing chemical and physical preservation methods, incorporated into films and coatings, and in vapor phase. We examined combinations of EOs with one another, with EO components, with surfactants, and with other preservatives or preservation methods to increase sanitizing efficacy. Components of major EOs were identified, and the chemical mechanisms, potential for antibacterial resistance, and effects on organoleptic properties were examined. Studies have revealed that EOs can be equivalent or better sanitizing agents than chlorine; nevertheless, concentrations must be kept low to avoid adverse sensory effects. For this reason, future studies should address the maximum permissible EO concentrations that do not negatively affect organoleptic properties. This review should be beneficial to food scientists or industry personnel interested in the use of EOs for sanitization and preservation of foods, including fresh produce.

HIGHLIGHTS

Characterization and evaluation of the influence of an alginate, cocoa and a bilayer alginate-cocoa coating on the quality of fresh-cut oranges during storage

BACKGROUND

Fresh-cut products are ready-to-use goods which retain the fresh characteristics of raw produce. However, numerous factors restrict the quality and shelf-life of fresh-cut products. One of the most promising, convenient and safe technologies to preserve the quality and to prolong the shelf-life of fresh fruits and vegetables is the application of edible coatings.

RESULTS

The aim of this study was to investigate the effects of different coatings (alginate-based, cocoa-based and a combination of them) on physicochemical, microbiological and sensory characteristics of fresh-cut oranges during storage. Preliminary rheological analyses were performed on coatings in order to characterize them. The three different coated orange samples were packaged in polyethylene terephthalate trays under atmospheric conditions and stored for 9 days at 6 °C. During storage, all samples were analysed for water activity, moisture, colour, texture, microbiological analyses and sensory quality. Orange samples coated with sodium alginate maintained the highest quality characteristics in terms of texture and microbiological properties, but not from a sensory point of view. Samples coated only with cocoa presented very high sensory attributes, but the lowest microbiological and textural quality. Samples covered in both alginate and cocoa demonstrated the best quality parameters throughout the whole storage period, including high sensory characteristics and the lowest microbiological cell loads (yeast and mesophilic aerobic bacteria under the threshold limit of 6.0 log cfu g^-1 ).

CONCLUSION

The bilayer coating represented the best solution in order to develop new ready to-eat-fresh oranges with both high textural and sensory attributes and prolonged shelf-life. © 2022 Society of Chemical Industry.

Marine Biopolymers: Applications in Food Packaging

Marine sources are gaining popularity and attention as novel materials for manufacturing biopolymers such as proteins and polysaccharides. Due to their biocompatibility, biodegradability, and non-toxicity features, these biopolymers have been claimed to be beneficial in the development of food packaging materials. Several studies have thoroughly researched the extraction, isolation, and latent use of marine biopolymers in the fabrication of environmentally acceptable packaging. Thus, a review was designed to provide an overview of (a) the chemical composition, unique properties, and extraction methods of marine biopolymers; (b) the application of marine biopolymers in film and coating development for improved shelf-life of packaged foods; (c) production flaws and proposed solutions for better isolation of marine biopolymers; (d) methods of preparation of edible films and coatings from marine biopolymers; and (e) safety aspects. According to our review, these biopolymers would make a significant component of a biodegradable food packaging system, reducing the amount of plastic packaging used and resulting in considerable environmental and economic benefits.

Molecular weight effects of low acyl gellan gum on antioxidant capacity and rheological properties

The current study investigated the antioxidant capacity of enzymatically cleaved low acyl gellan gum (LA-GAGR) fragments, named midi-GAGR (MW_v : 1.2 × 10⁵  Da) and mini-GAGR (MW_v : 2.5 × 10⁴  Da). Three different methods-hydroxide assay, superoxide assay, and DPPH assay-were used to measure the antioxidant capacity of the low acyl gellan gum fragments. Both mini-GAGR and midi-GAGR showed similar antioxidant capacities, 27.1% and 25.6%, respectively, for hydroxide radicals, whereas ascorbic acid showed 9.8%. For superoxide radicals, the fragments scavenged 41.7% (mini) and 35.6% (midi) of free radicals compared to 10.6% removal by ascorbic acid. Mini- and midi-GAGR displayed modest scavenging capabilities with DPPH radicals (8.5% and 6.6%, respectively) as compared to ascorbic acid (96.3%). Both midi- and mini-GAGR showed less gel-like behaviors than LA-GAGR. Midi-GAGR was observed to have a transition from liquid to gel at 63 rad/s. PRACTICAL APPLICATION: The results in the manuscript are helpful when gellan gum and its derivatives are directly applied to food processing as a dietary fiber supplement or a stabilizer for functional beverages. The antioxidant capacity results can be used to promote the functionality of gellan gum as a food additive and for controlling cell adhesion and growth on gellan gum scaffolds. The rheology results will be useful for synthesis of scaffolds for bone tissue generation and facilitating clinical treatments when gellan gum is injected as an adsorbent or a filler for treating bone fractures. In the pharmaceutical industry, they are useful when controlling the therapeutic effects of drug delivery systems.

Rediscovering bacterial exopolysaccharides of terrestrial and marine origins: novel insights on their distribution, biosynthesis, biotechnological production, and future perspectives

Bacteria exist in colonies as aggregates or associated with surfaces forming biofilms rather than planktonic cells. Living in such a unique manner is always mediated via a matrix of extracellular polymeric substances, which are composed mainly of polysaccharides or specifically exopolysaccharides (EPS). Biofilm formation and hence EPS production are affected by biotic and abiotic factors inducing/inhibiting several involved genes and other molecules. In addition, various aspects of bacterial EPS regarding: physiological functions, molecular weight, and chemical composition were demonstrated. Recent investigations have revealed a wide spectrum of EPS chemical and physicochemical properties showing promising applications in different industrial sectors. For instance, lactic acid bacteria (LAB)- and marine-derived EPS exhibit: immunomodulatory, antioxidant, antitumor, bioremediation of heavy metals, as well as thickening and viscosity modifiers in the food industry. However, bacterial EPS have not yet been commercially implemented, in contrast to plant-derived analogues. The current review aims to rediscover the EPS structural and biosynthetic features derived from marine and terrestrial bacteria, and applications as well.

Effect of Opuntia ficus-indica Mucilage Edible Coating in Combination with Ascorbic Acid, on Strawberry Fruit Quality during Cold Storage

Strawberry fruit is a nonclimacteric fruit and is one of the most consumed berries in the world. It is characterized by high levels of vitamin C, folate, vitamin E, β-carotene, and phenolic constituents as well asanthocyanins that are strictly related to health benefits. Strawberries are highly perishable fruit with a very short postharvest life due to their susceptibility to mechanical injury, rapid texture softening, physiological disorders, and infection caused by several pathogens (yeast and mold) that can rapidly reduce fruit quality. The aim of the present study was to evaluate the effect of the application of Opuntia ficus-indica mucilage in combination with ascorbic acid, as edible coating, on quality, sensorial parameters, and microbiological characteristics of strawberry fruit during cold storage at 4 ± 0.5°C and 85% RH. Strawberries were characterized by a linear increase of weight loss during the storage at 4°C that was significantly higher (+11.3% on average) in the uncoated strawberries. The coating affected the ascorbic acid content of the strawberries that increased by 36.0% in coated strawberries; total soluble solid content and color of the strawberries were only affected by storage. Visual quality and sensorial analysis recorded higher scores in the coated samples at the end of the cold storage period. Furthermore, the mucilage coating did not negatively affect the natural taste of strawberries. The application of O. ficus-indica gel-based edible coating in combination with ascorbic acid, although not able to inhibit the microbial growth, limited significantly their development in coated strawberry fruits. Our results suggest that Opuntia mucilage plus 5% ascorbic acid could be a useful biochemical way of maintaining strawberry fruit quality and extending their postharvest life.

Effect of Cross-Linked Alginate/Oil Nanoemulsion Coating on Cracking and Quality Parameters of Sweet Cherries

The cracking of sweet cherries causes significant crop losses. Sweet cherries (cv. Bing) were coated by electro-spraying with an edible nanoemulsion (NE) of alginate and soybean oil with or without a CaCl2 cross-linker to reduce cracking. Coated sweet cherries were stored at 4 °C for 28 d. The barrier and fruit quality properties and nutritional values of the coated cherries were evaluated and compared with those of uncoated sweet cherries. Sweet cherries coated with NE + CaCl2 increased cracking tolerance by 53% and increased firmness. However, coated sweet cherries exhibited a 10% increase in water loss after 28 d due to decreased resistance to water vapor transfer. Coated sweet cherries showed a higher soluble solid content, titratable acidity, antioxidant capacity, and total soluble phenolic content compared with uncoated sweet cherries. Therefore, the use of the NE + CaCl2 coating on sweet cherries can help reduce cracking and maintain their postharvest quality.

Effect of Nano Silicon Dioxide Coating Films on the Quality Characteristics of Fresh-Cut Cantaloupe

The prime objective of the research was to explore the coating effects of chitosan and nano-silicon dioxide with nisin as an antimicrobial agent on physicochemical properties, microbiological stability, and sensorial quality changes during the storage at 4 °C. The combination of nano-material and chitosan in addition to nisin was effective for reducing the postharvest attributes of fresh-cut cantaloupes in addition to the highest score in sensory evaluation. Chitosan coating treatment enhanced the microbiological quality 2.50 log CFU/g and 1.87 log CFU/g for aerobic counts and mold/yeasts populations, respectively. In a word, the combination of chitosan/nano-silica/nisin treatment was the best condition for fresh-cut cantaloupe shelf life extension by maintaining color, vitamin C 22.29 mg/100g, peroxidase activity 8.06 U/min.g, and other microbiological tests up to storage time of 8 days.

Bio-Packaging Material Impact on Blueberries Quality Attributes under Transport and Marketing Conditions

Blueberries are highly appreciated for their high antioxidant content but are also particularly susceptible to fungal deterioration. In this work, corn starch and chitosan, byproducts of the fishing industry, as well as active compounds obtained from citrus processing waste were used to obtain active biodegradable film packaging. Blueberries were packed in corn starch–chitosan (CS:CH) films and in active films containing lemon essential oil (LEO) or grapefruit seed extract (GSE). The effects of film packaging on the quality parameters of berries and the fungal incidence of disease during storage were studied and compared to benchmark materials. A conservation assay simulating transport and commercialization conditions was conducted. Blueberries packed in CS:CH films showed antioxidant capacity values closer to those packed in commercial PET containers (Clamshells), preserving 84.8% of the initial antioxidants content. Fruit packed in LEO films exhibited the greatest weight loss and rot incidence, and poor surface color. CS:CH and GSE films controlled the fruit respiration rate and weight loss, therefore they are materials with adequate barrier properties for blueberries conservation. Bags formulated with GSE showed adequate barrier properties to maintain fruit quality attributes without the incidence of rottenness, being an interesting option for blueberries exportation.

Spray technology applications of xanthan gum-based edible coatings for fresh-cut lotus root (Nelumbo nucifera)

In this study, the effect of spraying method as an application technique for xanthan gum-based edible coatings was investigated, based on its barrier and microbial properties on fresh-cut lotus root. Xanthan gum solutions (0.1%, 0.3%, and 0.5%) were prepared and incorporated with 2% (w/w) citric acid as an anti-browning agent and 1% (w/w) glycerol as plasticizer. The coatings were then sprayed using a pilot spray system to 5 mm-thick slices of fresh-cut lotus root for 20 s, packed in polyethylene bags, stored for 16 d at 5 °C and analyzed for color, pH, morphology and microbial counts. It was found that spray-coated fresh-cut lotus root samples had significant reduction in the total color changes as compared to non-coated samples. The experimental results suggested that the spray coating treatments were effective in decreasing the enzymatic browning of fresh-cut lotus root during storage which could potentially increase its shelf-life in the market. In addition, we have also found that the xanthan gum-based spray coated treatments were also effective against inhibiting the growth of Bacillus subtilis during 24 h of incubation which were indicated by the lower microbial counts recorded as compared to non-coated fresh-cut lotus root samples. In this part of the work, the author highlighted the spray coating technique of xanthan gum-based edible coatings as a promising strategy in improving the storage stability of fresh-cut lotus root during post-harvest storage. Overall, the application of edible coatings is a promising strategy in extending the shelf life of fresh-cut lotus root. In the future, the author aims to widen the scope of the application of these coatings to other agricultural products which are prone to degradation during storage in the market.

Ultrasonic nebulization-assisted layer-by-layer assembly based on carboxymethyl chitosan: An emerging alternative for promoting phenylpropanoid metabolism

To enrich the properties of chitosan (CS) and improve its applicability, we prepared carboxymethyl-chitosan (CMCS) by carboxymethylation and developed a layer-by-layer assembly (LBL) by the ultrasonic nebulization-assisted technique. The degree of carboxymethylation was 42.20% and the structure of CMCS was characterized using Fourier transform infrared, nuclear magnetic resonance spectroscopy. The ultrasonic nebulization-assisted LBL (UNLBL) edible coating was developed based on an inner negatively CMCS charged layer and an external positively charged CS layer. As compared to conventional LBL (CLBL) assembly, the greater thickness, stronger mechanical properties and lower water vapor permeability were detected in UNLBL assembly. Through an untargeted metabolomic analysis and real-time quantitative PCR, it was evident that ultrasonic nebulization-assisted LBL assembly is a promising alternative for promoting phenylpropanoid metabolism in strawberries.

Effect of Postharvest Application of Aloe Vera Gel on Shelf Life, Activities of Anti-Oxidative Enzymes, and Quality of 'Gola' Guava Fruit

Guava is an important climacteric fruits in terms of taste and aroma, which contains various vital nutrients such as minerals, carotenoids, ascorbic acid, and polyphenols. At ambient conditions, it exhibits a short shelf life, which makes it difficult for marketing and subsequent storage. Therefore, it is necessary to develop procedures to extend its shelf life and conserve quality. For this purpose, an aloe vera (AV) gel coating was assessed for its potential to enhance the shelf life of guava fruits. Guava fruits coated with AV gels (0, 20, 40, 60 and 80%, v/v) were evaluated for postharvest shelf life extension, changes in quality attributes, anti-oxidative activities, and flavonoid content when stored at ambient conditions (23 ± 2 °C and 70-75% relative humidity) for 12 days. The AV gel-treated fruits showed reduced increments in total sugar, malondialdehyde, and total carotene contents compared to untreated controls. AV gel-treated fruits exhibited higher contents of ascorbic acid, flavonoids (quercetin and rutin), and total phenolics in comparison to control fruits. Moreover, AV gel-treated fruits displayed greater activities of superoxide dismutase, catalase, and ascorbate peroxidase, along with higher antioxidant capacity and higher levels of total soluble solids, than untreated fruits. These results demonstrate that AV gel coating, especially at high concentrations, can be considered an eco-friendly and non-chemical substitute treatment for maintaining the postharvest quality of guava fruit.

Prospect of Polysaccharide-Based Materials as Advanced Food Packaging

The use of polysaccharide-based materials presents an eco-friendly technological solution, by reducing dependence on fossil resources while reducing a product's carbon footprint, when compared to conventional plastic packaging materials. This review discusses the potential of polysaccharides as a raw material to produce multifunctional materials for food packaging applications. The covered areas include the recent innovations and properties of the polysaccharide-based materials. Emphasis is given to hemicelluloses, marine polysaccharides, and bacterial exopolysaccharides and their potential application in the latest trends of food packaging materials, including edible coatings, intelligent films, and thermo-insulated aerogel packaging.

Edible Films and Coatings Functionalization by Probiotic Incorporation: A Review

Edible coatings and films represent an alternative packaging system characterized by being more environment- and customer-friendly than conventional systems of food protection. Research on edible coatings requires multidisciplinary efforts by food engineers, biopolymer specialists and biotechnologists. Entrapment of probiotic cells in edible films or coatings is a favorable approach that may overcome the limitations linked with the use of bioactive compounds in or on food products. The recognition of several health advantages associated with probiotics ingestion is worldwide accepted and well documented. Nevertheless, due to the low stability of probiotics in the food processing steps, in the food matrices and in the gastrointestinal tract, this kind of encapsulation is of high relevance. The development of new and functional edible packaging may lead to new functional foods. This review will focus on edible coatings and films containing probiotic cells (obtaining techniques, materials, characteristics, and applications) and the innovative entrapment techniques use to obtained such packaging.

Effect of different pretreatments followed by hot-air and far-infrared drying on the bioactive compounds, physicochemical property and microstructure of mango slices

In recent years there is an increasing interest in dried fruits, although many of their nutritional components are readily lost during drying. The novelty of this paper was to assess the effect of hot-air drying (HAD) and far-infrared drying (FIRD) on the physicochemical properties and microstructure of mango slices pretreated with: control; 0.1% citric acid + 0.5% ascorbic acid + 0.5% CaCl₂ + 1% NaCl; or 0.1% citric acid + 0.5% ascorbic acid + 0.5% CaCl₂ + 1% NaCl + ultrasound treatments. Pretreatments resulted in a significant (p < 0.05) increase in reducing sugar, ascorbic acid and total phenol contents of dried samples. Moreover, compared with HAD, FIRD maintained a higher phenolic acid content, improved the nutrient retention and color attributes and better preserved microstructure. Therefore, pretreatments followed by FIRD is a potential method for obtaining high-quality dried mango slices.

The Development of a Uniform Alginate-Based Coating for Cantaloupe and Strawberries and the Characterization of Water Barrier Properties

Water loss, gain or transfer results in a decline in the overall quality of food. The aim of this study was to form a uniform layer of sodium alginate-based edible coating (1.25% sodium alginate, 2% glycerol, 0.2% sunflower oil, 1% span 80, 0.2% tween 80, (w/w)) and investigate the effects on the water barrier characteristics of fresh-cut cantaloupe and strawberries. To this end, a uniform and continuous edible film formation was achieved (0.187 ± 0.076 mm and 0.235 ± 0.077 mm for cantaloupe and strawberries, respectively) with an additional immersion step into a calcium solution at the very beginning of the coating process. The coating application was effective in significantly reducing the water loss (%) of the cantaloupe pieces. However, no significant effect was observed in water vapor resistance results and weight change measurements in a climate chamber (80%→60% relative humidity (RH) at 10 °C). External packaging conditions (i.e., closed, perforated, and open) were not significantly effective on water activity (aw) values of cantaloupe, but were effective for strawberry values. In general, the coating application promoted the water loss of strawberry samples. Additionally, the water vapor transmission rate of stand-alone films was determined (2131 g·100 µm/(m2·d·bar) under constant environmental conditions (23 °C, 100%→50% RH) due to the ability to also evaluate the efficacy in ideal conditions.

Development of antimicrobial edible coating based on modified chitosan for the improvement of strawberries shelf life

Edible antimicrobial coating produced from chitosan (CS) and its derivative was applied to improve the shelf life of fresh strawberries at 10 °C. Fruits treated with coating solution was stored at 10 °C and evaluated for weight loss, visual decay and microbiological analysis. Results indicated that the percentage weight loss and the decay were significantly (p < 0.05) lower for chitosan-monomethyl fumaric acid (CS-MFA) than that of CS and control samples. The total aerobic count for CS-MFA was 3.32 log CFU/fruit and was considerably lowered (p < 0.05) than CS (3.83 log CFU/fruit) and control (5.31 log CFU/fruit) at the end of storage. Fruit coated with CS-MFA showed significantly lowered (p < 0.05) count of yeast and molds when compared with CS. In conclusion, the antimicrobial edible coating based on modified CS improved microbiological characteristics and increased the shelf life from 4 (control) to 8 days (coated fruits).

Alginate-Based Edible Films and Coatings for Food Packaging Applications

Alginate is a naturally occurring polysaccharide used in the bio industry. It is mainly derived from brown algae species. Alginate-based edible coatings and films attract interest for improving/maintaining quality and extending the shelf-life of fruit, vegetable, meat, poultry, seafood, and cheese by reducing dehydration (as sacrificial moisture agent), controlling respiration, enhancing product appearance, improving mechanical properties, etc. This paper reviews the most recent essential information about alginate-based edible coatings. The categorization of alginate-based coatings/film in food packaging concept is formed gradually with the explanation of the most important titles. Emphasis will be placed on active ingredients incorporated into alginate-based formulations, edible coating/film application methods, research and development studies of coated food products and mass transfer and barrier characteristics of the alginate-based coatings/films. Future trends are also reviewed to identify research gaps and recommend new research areas. The summarized information presented in this article will enable researchers to thoroughly understand the fundamentals of the coating process and to develop alginate-based edible films and coatings more readily.

Effect of edible coatings based on alginate/pectin on quality preservation of minimally processed 'Espada' mangoes

The aims of the study were to develop and apply alginate and pectin-based edible coatings on minimally processed mango (Mangifera indica L.) variety 'Espada'. A full experimental design was performed using alginate, pectin and glycerol concentrations as independent variables and total soluble solids as response variable. Minimally processed mango was immersed in each film forming solution, calcium chloride and glycerol solutions pretreated with 1% (w/v) solution of ascorbic acid, dried at 25 ± 2 °C for 24 h and then refrigerated at 8 ± 1 °C for 14 d. Based on the results of the experimental design, the following formulations were evaluated: 2% (w/v) alginate/3% (w/v) pectin (with and without glycerol) and 3% (w/v) alginate/0.5% (w/v) pectin (with and without glycerol). Fruits coated with biopolymers had lower total soluble solids content and titratable acidity compared to the control group. The formulation containing 2% (w/v) alginate, 3% (w/v) pectin and 5.5% (w/v) glycerol showed the best performance for long-term refrigerated storage of minimally processed mango for a period of 16 d.

Effect of Presence and Concentration of Plasticizers, Vegetable Oils, and Surfactants on the Properties of Sodium-Alginate-Based Edible Coatings

Achieving high quality of a coated food product is mostly dependent on the characteristics of the food material to be coated, the properties of the components in the coating solution, and the obtained coating material. In the present study, usability and effectiveness of various components as well as their concentrations were assessed to produce an effective coating material. For this purpose, different concentrations of gelling agent (sodium alginate 0-3.5%, w/w), plasticizers (glycerol and sorbitol (0-20%, w/w), surfactants (tween 40, tween 80, span 60, span 80, lecithin (0-5%, w/w), and vegetable oils (sunflower oil, olive oil, rapeseed oil (0-5%, w/w) were used to prepare edible coating solutions. Formulations were built gradually, and characteristics of coatings were evaluated by analyzing surface tension values and its polar and dispersive components, emulsion droplet size, and optical appearance in microscopic scale. The results obtained showed that 1.25% sodium alginate, 2% glycerol, 0.2% sunflower oil, 1% span 80, and 0.2% tween 40 or tween 80 can be used in formulation to obtain an effective coating for hydrophobic food surfaces. Three formulations were designed, and their stability (emulsion droplet size, optical characteristics, and creaming index) and wettability tests on strawberry showed that they could be successfully used in coating applications.

Probiotic Incorporation in Edible Films and Coatings: Bioactive Solution for Functional Foods

Nowadays, the consumption of food products containing probiotics, has increased worldwide due to concerns regarding healthy diet and wellbeing. This trend has received a lot of attention from the food industries, aiming to produce novel probiotic foods, and from researchers, to improve the existing methodologies for probiotic delivery or to develop and investigate new possible applications. In this sense, edible films and coatings are being studied as probiotic carriers with many applications. There is a wide variety of materials with film-forming ability, possessing different characteristics and subsequently affecting the final product. This manuscript aims to provide significant information regarding probiotics and active/bioactive packaging, to review applications of probiotic edible films and coatings, and to discuss certain limitations of their use as well as the current legislation and future trends.