pH-, ion- and temperature-dependent emulsion gels: Fabricated by addition of whey protein to gliadin-nanoparticle coated lipid droplets

Fabrication, characterization and application of Pickering emulsion gels stabilized by defatted grape seed powder

The feasibility of defatted grape seed powder (DGSP) stabilizing Pickering emulsion gels as butter substitute was investigated. The Pickering emulsion gel was constructed using DGSP through high-speed homogenization, and the effects of particle concentration (c) and oil-phase (Medium chain triglyceride) volume fraction (φ) on its structure and properties were investigated. Its application as a butter substitute was also evaluated. The results showed that DGSP had various particle shapes, a wide particle size distribution (3-130 μm), and a three-phase contact angle of 128.9 ± 2.3°. The O/W Pickering emulsion gels with φ ≥ 60% could be obtained at c ≥ 2%. The droplet diameter was negatively correlated with c and positively correlated with φ, while the gel strength was positively related to c and φ. The resulting emulsion gel demonstrated solid-like viscoelastic behavior and pseudoplasticity, and had the potential to serve as a butter substitute. The results can promote the application of grape seeds in food.

Liquid-liquid biopolymers aqueous solution segregative phase separation in food: From fundamentals to applications-A review

As a result of the spontaneous movement of molecules, liquid-liquid biopolymer segregative phase separation takes place in an aqueous solution. The efficacy of this type of separation can be optimized under conditions where variables such as pH, temperature, and molecular concentrations have minimal impact on its dynamics. Recently, interest in the applications of biopolymers and their segregative phase separation-associated molecular stratification has increased, particularly in the food industry, where these methods permit the purification of specific particles and the embedding of microcapsules. The present review offers a comprehensive examination of the theoretical mechanisms that regulate the liquid-liquid biopolymers aqueous solution segregative phase separation, the factors that may exert an impact on this procedure, and the importance of this particular separation method in the context of food science. These discussion points also address existing difficulties and future possibilities related to the use of segregative phase separation in food applications. This highlights the potential for the design of novel functional foods and the enhancement of food properties.

Rheology, physicochemical properties, and microstructure of fish gelatin emulsion gel modified by γ-polyglutamic acid

In this work, the effect of the addition of γ-polyglutamic acid (γ-PGA) on the rheology, physicochemical properties, and microstructure of fish gelatin (FG) emulsion gel was investigated. Samples of the emulsion gel were evaluated for rheological behavior and stability prior to gelation. The mechanical properties and water-holding capacity (WHC) of the emulsion were determined after gelation. The microstructure of the emulsion gel was further examined using confocal laser scanning microscopy (CLSM). The results indicated a gradual increase in the apparent viscosity and gelation temperature of the emulsion at a higher concentration of γ-PGA. Additionally, frequency scan results revealed that on the addition of γ-PGA, FG emulsion exhibited a stronger structure. The emulsion containing 0.1% γ-PGA exhibited higher stability than that of the control samples. The WHC and gel strength of the emulsion gel increased on increasing the γ-PGA concentration. CLSM images showed that the addition of γ-PGA modified the structure of the emulsion gel, and the droplets containing 0.1% γ-PGA were evenly distributed. Moreover, γ-PGA could regulate the droplet size of the FG emulsion and its size distribution. These findings suggest that the viscoelasticity and structure of FG emulsion gels could be regulated by adjusting the γ-PGA concentration. The γ-PGA-modified FG emulsion gel also exhibited improved rheology and physicochemical properties. The results showed that γ-PGA-modified FG emulsion gel may find potential applications in food, medicine, cosmetics, and other industries.

Exploring xylitol as a low-salt alternative for effective inhibition of gelation in frozen egg yolks

Xylitol and NaCl were studied as alternative inhibitors of gelation in frozen egg yolks, considering the current dietary preference for low salt and low sucrose intake. The effects of different ratios of xylitol and NaCl on gelation were investigated. Compared to the control group, all treatment groups showed decreased egg yolk particle size and turbidity, increased solubility, surface hydrophobicity, λmax, and fluorescence intensity, reduced loss of free water, and enhanced yolk fluidity. The addition of xylitol and NaCl effectively prevented ice crystal growth, minimized protein denaturation caused by water loss, and formed complexes with proteins and water lost during freezing, thereby inhibiting the aggregation of protein molecules and the formation of gels. This study presents a novel and healthier strategy for inhibiting gelation of frozen egg yolk using xylitol and NaCl.

Green tea polysaccharide conjugates and bovine serum albumin have a synergistic effect in improving the emulsification ability

Our previous study revealed that green tea polysaccharide conjugate (gTPC) has emulsion effect, but its emulsifying ability is weak. In order to improve the emulsification ability of gTPC, gTPC and bovine serum albumin (BSA) were combined to form five different mass proportions of the TPC/BSA (TB) complex: TPC/BSA: 5:1, 5:2, 5:3, 5:4, and 5:5 w/w. We observed that the 5:5 w/w TB emulsion was more hydrophobic and surface-active. Furthermore, the emulsions prepared using 50.00 wt% medium-chain triglycerides exhibited the best stability. In addition, the TB emulsion exhibited stability in adverse environments of pH, salt, and heat; in particular, under salt conditions, no significant changes were observed in zeta potential. Subsequently, in vitro simulated digestion experiments were performed to investigate the use of TB emulsions for β-carotene encapsulation. We observed that the encapsulation efficiency for β-carotene was approximately 90.0 %; it was subsequently released in the intestine.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

Assessing the emulsifying properties of Tenebrio molitor larvae protein preparations: Impact of storage, thermal, and freeze-thaw treatments on o/w emulsion stability

Insect proteins have gained attention as novel ingredients, which may contribute to the development of high-value-added products. This study evaluates the emulsifying and emulsion-stabilizing properties of Tenebrio molitor larvae protein preparations obtained through different procedures, leading to the following rich-in-protein samples: ASP (∼67 %), AIP (∼75 %), and SSP (∼62 %). The method applied for protein isolation influenced the molecular and structural characteristics of the preparations, thus affecting their adsorption behaviour at oil-water interfaces and ability to stabilize emulsions. O/w emulsions were prepared, and their physicochemical stability was assessed with respect to droplet size, oil droplet flocculation/coalescence, microstructure, and creaming upon storage as well as after thermal and freeze-thaw treatments. The use of ASP and AIP protein preparation as emulsifiers led to higher stability during storage. All emulsions were stable upon heating and able to withstand two freeze-thaw cycles without phase separation, although there was an increase in droplet size. Interestingly, the AIP emulsion remained stable after the 3rd freeze-thaw cycle, indicating remarkable stability under freezing compared to the other two emulsions. These findings are of great importance for the formulation of food-grade emulsions using insect protein preparations and their future exploitation in developing food items subjected to different treatments.

Impact of Combined Thermal Pressure Treatments on Physical Properties and Stability of Whey Protein Gel Emulsions

Emulsion gels are gaining interest as fat replacers due to their benefits associated with calorie reduction and their versatility in a wide range of products. Their production process needs to be tailored to obtain the desired stability and physicochemical properties. This study investigated the effect of heat (70, 80, and 90 °C) and pressure (5, 10, and 15 MPa) to produce whey protein emulsion gels using a pilot-scale tubular heat exchanger equipped with a homogenization valve. Both temperature and pressure determined a significant effect (p < 0.05) on the rheological moduli, with the treated samples displaying a predominant elastic behavior. The treatments also showed an improved pseudoplasticity due to the significant reduction in the flow behavior index (p < 0.05). All the samples showed a bimodal particle size distribution; by increasing the temperature up to 80 °C, a reduction in Dv50 (50th percentile) values compared to the control samples was observed. At 90 °C, the Dv50 value increased because of coalescence and flocculation phenomena occurring during or immediately after processing. The greater aggregation and structural development obtained with stronger process conditions improved the stability of the emulsions. The results show the capability to produce gel emulsions with good physical properties that could be proposed as food ingredients to substitute fats in food products.

Advances in preparation and application of food-grade emulsion gels

Emulsion gel is a semi-solid or solid material with a three-dimensional net structure produced from emulsion through physical, enzymatic, chemical methods or their combination. Emulsion gels are widely used in food, pharmaceutical and cosmetic industries as carriers of bioactive substances and fat substitutes due to their unique properties. The modification of raw materials, and the application of different processing methods and associated process parameters profoundly affect the ease or difficult of gel formation, microstructure, hardness of the resulting emulsion gels. This paper reviews the important research undertaken in the last decade focusing on classification of emulsion gels, their preparation methods, the influence of processing method and associated process parameters on structure-function of emulsion gels. It also highlights current status of emulsion gels in food, pharmaceutical and medical industries and provides future outlook on research directions requiring to provide theoretical support for innovative applications of emulsion gels, particularly in food industry.

Construction of whey protein gels prepared by three methods to stabilize high internal phase Pickering emulsions loaded with CoQ10 under different pH

The aim of this study was to investigate the effect of whey protein gel particles (WPGPs) prepared by heat-induced method, enzyme cross-linking method and calcium ion cross-linking method on the structural properties and intrinsic linkage of their stable high internal phase Pickering emulsions (HIPPEs) under different pH conditions. The effects of different pH and preparation methods on the internal interaction forces, particle size, ζ-potential, wettability and secondary structure of gels was investigated. The results indicated that the construction of HIPPEs system was successfully constructed at pH 3, 5 or 7. The WPGPs stabilized HIPPEs can maintain stable state at 4 °C for 28 days. Coenzyme Q10 (CoQ10) loaded with HIPPEs increased the bioavailability from 13.2% to 79.4%, which was demonstrated in in vitro digestion experiments.

Formation mechanism of Pickering emulsion gels stabilized by proanthocyanidin particles: Experimental and molecular dynamics studies

The feasibility of constructing a Pickering emulsion gel with proanthocyanidin particles (PAP) was evaluated in this study, and the related mechanism was revealed by combining instrumental characterization with molecular dynamics simulation. The results showed that PAP was composed of nano/micron spherical particles or their fragments, which had excellent wettability. Suitable PAP addition amount (w, ≥1%) and oil volume fraction (φ, 40-90 %) were beneficial to the formation of stable Pickering emulsion gel. The oil droplet size of gel was inversely proportional to w and φ. The mechanical parameters (gel strength, loss modulus, and storage modulus) were positively correlated with w and φ. Molecular dynamics simulation indicated that the proanthocyanidin molecules in the oil-water system could spontaneously reside and aggregate at the interface, and their interactions with water and oil reduced interfacial tension, which was consistent with the experimental results. This study provides a reference for other polyphenol-based Pickering emulsions.

The Improvement of Dispersion Stability and Bioaccessibility of Calcium Carbonate by Solid/Oil/Water (S/O/W) Emulsion

Solid/oil/water (S/O/W) emulsion loaded with calcium carbonate (CaCO₃) was constructed to raise the dispersion stability and bioaccessibility. In the presence or absence of sodium caseinate (NaCas), the particle size, Zeta-potential, physical stability, and apparent viscosity of stabilized S/O/W emulsions with different gelatin (GEL) concentrations (0.1~8.0 wt%) were compared. Combined with a confocal laser scanning microscope (CLSM), cryoscanning electron microscope (Cryo-SEM), and interfacial adsorption characteristics, the stabilization mechanism was analyzed. The bioavailability of CaCO₃ was investigated in a simulated gastrointestinal tract (GIT) model. The S/O/W-emulsion droplets prepared by the NaCas-GEL composite have a smaller particle size, higher Zeta-potential, larger apparent viscosity, and better physical stability compared with GEL as a single emulsifier. CLSM results confirmed that CaCO₃ powder was encapsulated in emulsion droplets. The Cryo-SEM results and interfacial adsorption characteristics analysis indicated that the NaCas-GEL binary composite could effectively reduce the interfacial tension, and the droplets form a denser three-dimensional network space structure with a shell-core structure which enhanced the stability of the system. GIT studies showed that the droplets presented higher CaCO₃ bioaccessibility than the CaCO₃ powder. This study enriched the theory of the S/O/W transfer system and provided theoretical support for the development of CaCO₃ application in liquid food.

Naturally occurring protein/polysaccharide hybrid nanoparticles for stabilizing oil-in-water Pickering emulsions and the formation mechanism

In this study, we reported for the first time that the natural protein/polysaccharide hybrid nanoparticles (PPH NPs) with a diameter of ∼ 129 nm, originating from Lactobacillus plantarum fermented cheese whey, could act as green-based NPs for stabilizing Pickering emulsions. Characterizations of PPH NPs showed that the negative-charged PPH NPs were composed of ∼ 37.7% total protein and ∼ 7.3% polysaccharide bearing several functional groups, such as -OH, -NH, -COOH, etc.; and displayed excellent emulsifying capacity in preparing oil-in-water Pickering emulsions. The obtained emulsions exhibited gel-like behavior with excellent stability against the variation of pH, ionic strength, and temperature. Confocal observations showed that PPH NPs effectively adsorbed and anchored at the oil-water interface, thus creating the steric hindrance to inhibit droplet coalescence. This research is of importance in developing novel and biocompatible Pickering stabilizers with outstanding performance, as well as enable a versatile design of stable Pickering emulsions suitable for food industries.

Hydrogels assembled from hybrid of whey protein amyloid fibrils and gliadin nanoparticles for curcumin loading: Microstructure, tunable viscoelasticity, and stability

Food grade hydrogel has become an ideal delivery system for bioactive substances and attracted wide attention. Hybrids of whey protein isolate amyloid fibrils (WPF) and gliadin nanoparticles (GNP) were able to assemble into WPF-GNP hydrogel at a low protein concentration of 2 wt%, among which WPF and GNP were fabricated from the hydrolysis of whey protein isolate under 85°C water bath (pH 2.0) and antisolvent precipitation, respectively. Atomic force microscope (AFM) images indicated that the ordered nanofibrillar network of WPF was formed at pH 2.0 with a thickness of about 10 nm. Cryo-SEM suggested that WPF-GNP hydrogel could arrest GNP within the fibrous reticular structure of the partially deformed WPF, while the hybrids of native whey protein isolate (WPI) and GNP (WPI-GNP hybrids) only led to protein aggregates. WPF-GNP hydrogel formed at pH 4.0 (85°C, 3 h, WPF:GNP = 4:1) possessed the largest elastic modulus (G’ = 419 Pa), which far exceeded the elastic modulus of the WPI-GNP hybrids (G’ = 16.3 Pa). The presence of NaCl could enhance the strength of WPF-GNP hydrogel and the largest value was achieved at 100 mM NaCl (∼10⁵ mPa) in the range of 0∼500 mM due to electrostatic screening. Moreover, WPF-GNP hydrogel showed a high encapsulation efficiency for curcumin, 89.76, 89.26, 89.02, 85.87, and 79.24% for pH 2.0, 3.0, 4.0, 5.0, and 6.0, respectively, which suggested that the formed hydrogel possess good potential as a delivery system. WPF-GNP hydrogel also exhibited a good protection effect on the photodegradation stability of the loaded curcumin with the retention of up to 75.18% after hydrogel was exposed to ultraviolet radiation for 7 days. These results suggested that the viscoelasticity of WPF-GNP hydrogel was tunable via pH-, ion-, or composition-adjustment and the hydrogel showed excellent protection on the thermal and photodegradation stability of curcumin.

Soy and whey protein isolate mixture/calcium chloride thermally induced emulsion gels: Rheological properties and digestive characteristics

We present the preparation and physicochemical properties of thermally induced emulsion gels of a soy protein isolate-whey protein isolate (SPI-WPI)/calcium chloride composite, and the analysis of their nutrient release behaviors using fat-soluble vitamin E as a model system by simulating its digestion in vitro. In general, the SPI-WPI composite emulsion gel was found to have better water-holding capacity and texture than the emulsion gels formed by the single protein. The microstructure and rheological properties of the gel suggested that the CaCl₂ concentration significantly influences the fundamental structure and mechanical properties of the SPI-WPI gel. The in vitro digestion experiments revealed that the mixed protein emulsion gel improves the bioavailability of vitamin E. This study is of great significance in the utilization of these natural emulsifiers, as they can be used in the development of emulsion delivery systems for lipophilic nutrients and other health products.

Application of Emulsion Gels as Fat Substitutes in Meat Products

Although traditional meat products are highly popular with consumers, the high levels of unsaturated fatty acids and cholesterol present significant health concerns. However, simply using plant oil rich in unsaturated fatty acids to replace animal fat in meat products causes a decline in product quality, such as lower levels of juiciness and hardness. Therefore, it is necessary to develop a fat substitute that can ensure the sensory quality of the product while reducing its fat content. Consequently, using emulsion gels to produce structured oils or introducing functional ingredients has attracted substantial attention for replacing the fat in meat products. This paper delineated emulsion gels into protein, polysaccharide, and protein–polysaccharide compound according to the matrix. The preparation methods and the application of the three emulsion gels as fat substitutes in meat products were reviewed. Since it displayed a unique separation structure, the double emulsion was highly suitable for encapsulating bioactive substances, such as functional oils, flavor components, and functional factors, while it also exhibited significant potential for developing low-fat or functional healthy meat products. This paper summarized the studies involving the utilization of double emulsion and gelled double emulsion as fat replacement agents to provide a theoretical basis for related research and new insight into the development of low-fat meat products.

Structuring functional mayonnaise incorporated with Himalayan walnut oil Pickering emulsions by ultrasound assisted emulsification

Nowadays Pickering emulsions have attracted immense attention due to their enhanced stability and numerous food applications. In this context, the present study was aimed to introduce Pickering emulsions stabilized by soy protein isolate (SPI)-maltodextrin (MD)-pectin complex incorporated with Himalayan walnut oil (HWO) for development of novel mayonnaise by ultrasound assisted emulsification. The functional mayonnaise was characterised for its stability, structural, textural, rheological and morphological properties. The rheological and microstructure measurements indicated that use of SPI-pectin HWO emulsions had a viscoelastic solid behaviour (G' > G″) with highly interconnected gel-like network structure leading to diffused oil droplet distribution. An increase in particle size diameter (1.86-5.09 µm) and hardness values (43.16-69.08 N) was seen with increase in the SPI-pectin wall material concentration. A significant reduction in whiteness (L* value) from 91.12 to 53.52 was noted during storage for encapsulated samples. Mayonnaise formulations containing encapsulated HWO depicted significantly lower peroxide value (2.65 meqO₂/kg) after extended storage period in comparison to free oil (8.33 meqO₂/kg). FTIR analysis of mayonnaise formulations depicted successful complexation of HWO with SPI-MD-pectin matrix. These findings would be of immense importance in designing of Pickering emulsions stabilized by protein-polysaccharide particles with aim of delivering nutraceuticals associated with myriad health benefits.

Stability improvement of emulsion gel fabricated by Artemisia sphaerocephala Krasch. polysaccharide fractions

Artemisia sphaerocephala Krasch. polysaccharide (ASKP) contained two fractions of 60P and 60S with different molecular weight. It was found the potential performance of interface adsorption and gelation activities for the high molecular weight of 60P in comparison with low molecular weight of 60S. The emulsion stability and droplets filling in gel network was highly dependent on the medium chain triglyceride (MCT) concentrations. The emulsion gels fabricated through a complexation of 60P and gelatin or collagen peptides exhibited significantly improved emulsifying activity and gel strength at higher concentration of MCT. Gelatin or collagen peptide could be adsorbed on the droplets interface and interact with 60P in gel matrix, thus presenting an active filling. However, 60P based emulsion gel complexed with pullulan contributed to a lower strength than hydrogel, which was probably due to the existence of spaces between droplets and gel matrix, weakening the stability of gel network, considered as an inactive filling.

High internal phase oil-in-water emulsions stabilized by supercritical carbon dioxide extruded whey protein concentrate

High Internal Phase Emulsions (HIPEs) were stabilized by functionalized whey protein concentrate (WPC-80). Functionalization of WPC-80 was done by supercritical CO₂ assisted extrusion technology. HIPEs were formed by 80% oil and 1-4 wt% of control (untreated) whey protein concentrate, extruded/functionalized whey protein concentrates (f-WPC-80) at pH 3.0 and 5.4, and sodium caseinate (NaCas) separately and were characterized for their stability at two temperatures (25 and 40 °C) for 20 days. Results indicated that f-WPC-80-pH3.0 formed self-standing gels at 1 wt% concentrations which were more stable, without phase separation, than those stabilized by commercially used stabilizer NaCas and native c-WPC. At 4% concentration of f-WPC-80-pH3.0, the compressed droplets produced emulsions with self-standing and viscoelastic features. While control WPC-80, could not form stable HIPEs at any investigated concentrations. The reported high internal phase oil-in-water emulsions, offer a potential new system for delivery of nutritionally superior and clean-label products of commercial utility.

pH-Responsive Behavior of Pickering Emulsions Stabilized by a Selenium-Containing Surfactant and Alumina Nanoparticles

Herein, we describe pH-responsive Pickering emulsions stabilized by a sodium carboxylate-derived selenium surfactant (C₁₀-Se-C₁₀·(COONa)₂) in combination with positively charged alumina nanoparticles. Unlike other bola-type carboxylate surfactants (e.g., disodium eicosanoate), C₁₀-Se-C₁₀·(COONa)₂ is soluble in water with a low Krafft temperature (36.1 °C). The emulsions are sensitive to pH variations, and efficient demulsification can be achieved by a pH trigger. The carboxylic sodium group in the C₁₀-Se-C₁₀·(COONa)₂ structure can be reversibly cycled between its anionic and nonionic states (carboxylic acid), resulting in a pH-controlled electrostatic attraction between the surfactant and alumina. The Pickering emulsion can be reversibly switched between "on" (stable) and "off" (unstable) states by pH at least four times. Compared with the emulsions stabilized by specially synthesized stimuli-responsive particles or surfactants, the method reported here is much easier to implement and requires very low concentrations of the surfactant and nanoparticles, with potential applications in the fields of biomedicine, drug delivery, and cosmetics.

Development of Salt- and Gastric-Resistant Whey Protein Isolate Stabilized Emulsions in the Presence of Cinnamaldehyde and Application in Salad Dressing

Protein-stabilized emulsions tend to be susceptible to droplet aggregation in the presence of high ionic strengths or when exposed to acidic gastric conditions due to a reduction of the electrostatic repulsion between the protein-coated droplets. Previously, we found that incorporating cinnamaldehyde into the oil phase improved the resistance of whey protein isolate (WPI)-stabilized emulsions against aggregation induced by NaCl, KCl and CaCl2. In the current study, we aimed to establish the impact of cinnamaldehyde on the tolerance of WPI-stabilized emulsions to high salt levels during food processing and to gastric conditions. In the absence of cinnamaldehyde, the addition of high levels of monovalent ions (NaCl and KCl) to WPI-emulsions cause appreciable droplet aggregation, with the particle sizes increasing from 150 nm to 413 nm and 906 nm in the presence of NaCl and KCl, respectively. In contrast, in the presence of 30% cinnamaldehyde in the oil phase, the WPI-emulsions remained stable to aggregation and the particle size of emulsions kept within 200 nm over a wide range of salt concentrations (0-2000 mM). Divalent counter-ions promoted droplet aggregation at lower concentrations (≤20 mM) than monovalent ones, which was attributed to ion-binding and ion-bridging effects, but the salt stability of the WPI emulsions was still improved after cinnamaldehyde addition. The incorporation of cinnamaldehyde into the oil phase also improved the resistance of the WPI-coated oil droplets to aggregation in simulated gastric fluids (pH 3.1-3.3). This study provides a novel way of improving the resistance of whey-protein-stabilized emulsions to aggregation at high ionic strengths or under gastric conditions.

Agarose Stearate-Carbomer940 as Stabilizer and Rheology Modifier for Surfactant-Free Cosmetic Formulations

Some commonly used surfactants in cosmetic products raise concerns due to their skin-irritating effects and environmental contamination. Multifunctional, high-performance polymers are good alternatives to overcome these problems. In this study, agarose stearate (AS) with emulsifying, thickening, and gel properties was synthesized. Surfactant-free cosmetic formulations were successfully prepared from AS and carbomer₉₄₀ (CBM₉₄₀) mixed systems. The correlation of rheological parameter with skin feeling was determined to study the usability of the mixed systems in cosmetics. Based on rheological analysis, the surfactant-free cosmetic cream (SFC) stabilized by AS-carbomer₉₄₀ showed shear-thinning behavior and strongly synergistic action. The SFC exhibited a gel-like behavior and had rheological properties similar to commercial cosmetic creams. Scanning electron microscope images proved that the AS-CBM₉₄₀ network played an important role in SFC’s stability. Oil content could reinforce the elastic characteristics of the AS-CBM₉₄₀ matrix. The SFCs showed a good appearance and sensation during and after rubbing into skin. The knowledge gained from this study may be useful for designing surfactant-free cosmetic cream with rheological properties that can be tailored for particular commercial cosmetic applications. They may also be useful for producing medicine products with highly viscous or gel-like textures, such as some ointments and wound dressings.

Development of a High Internal Phase Emulsion of Antarctic Krill Oil Diluted by Soybean Oil Using Casein as a Co-Emulsifier

Antarctic krill oil (AKO) with 5–30% (w/w) dilution by soybean oil was co-emulsified by phospholipids (PLs) naturally present in AKO and 2% (w/w) casein in the aqueous phase to prepare high internal phase emulsions (HIPEs). The results showed that raising the AKO level resulted in concave-up changes in the mean size of oil droplets which became more densely packed. Confocal laser scanning microscopy (CLSM) and cryo-scanning electron microscopy (cryo-SEM) micrographs revealed that PLs at higher concentrations expelled more casein particles from the oil droplet surface, which facilitated the formation of a crosslinked network structure of HIPEs, leading to reduced mobility of water molecules, extended physical stability, and somewhat solid-like behavior. The rheological analysis showed at lower levels of AKO promoted fluidity of emulsions, while at higher levels it increased elasticity. Lastly, increasing the AKO level slowed down the oxidation of HIPEs. These findings provide useful insights for developing HIPEs of highly viscous AKO and its application in foods.

Rheology, Microstructure, and Storage Stability of Emulsion-Filled Gels Stabilized Solely by Maize Starch Modified with Octenyl Succinylation and Pregelatinization

We prepared emulsion-filled gels stabilized using octenyl succinic anhydride-modified and pregelatinized maize starch (OSA-PGS). The effect of the oil volume fraction (Φ, 0.05–0.20) and OSA-PGS concentration (3–10% w/v) on the rheological and microstructural properties of the emulsion-filled gels was evaluated. Confocal fluorescence images showed that OSA-PGS stabilized the emulsion, indicated by the formation of a thick layer surrounding the oil droplets, and simultaneously gelled the aqueous phase. All of the emulsions exhibited shear-thinning flow behavior, but only those with 10% w/v OSA-PGS were categorized as Herschel–Bulkley fluids. The rheological behavior of the emulsion-filled gels was significantly affected by both the OSA-PGS concentration and Φ. The mean diameters (D1,0, D3,2, and D4,3) of oil droplets with 10% w/v OSA-PGS were stable during 30 days of storage under ambient conditions, indicating good stability. These results provide a basis for the design of systems with potential applications within the food industry.

Improved stabilization of coix seed oil in a nanocage-coating framework based on gliadin-carboxymethyl chitosan-Ca2

Coix seed oil (CSO) is easily suffered functional-loss by oxidation and hydrothermal-treatment. The environmental stable nanocage-coating-CSO particles (OGC-Ca) by the frameworks consist of gliadins, carboxymethyl chitosan (CMCS) and Ca²⁺ were investigated. Results showed Ca²⁺ was the key controller for fabricating this nanocage-coating-frameworks, bridging macromolecule-chains with electrostatic interaction and hydrogen bonds, detected by FTIR, CD, DSC and XRD. SEM displayed new-formed velvet-like twigs after cross-linking CMCS to gliadins. Ca²⁺ assisted the nanocage-coating by significant down-sizing conversion OGC to OGC-Ca with consumption of twigs. OGC-Ca displayed a good stability towards heat (60-80 °C, 0-80 min), pH (3-8), NaCl (0-0.5 mM), storage (4/25 °C, 12 days), and a reduce of the pre-oxidation value of CSO in water and the improved controlled release of CSO in simulated GI tract. It illustrated GC-Ca frameworks would be a suitable delivery carrier for the CSO like pharmaceuticals and nutraceuticals for the food or medical use.