Spray-drying microencapsulation of curcumin nanocomplexes with soy protein isolate: Encapsulation, water dispersion, bioaccessibility and bioactivities of curcumin

Encapsulation of luteolin by self-assembled Rha/SSPS/SPI nano complexes: Characterization, stability, and gastrointestinal digestion in vitro

Luteolin has anti-inflammatory, antioxidant, and anti-tumor functions, but its poor water solubility and stability limit its applications in foods as a functional component. In this study, the nanocomposites loading luteolin (Lut) with soybean protein isolate (SPI), soluble soybean polysaccharide (SSPS) and/or rhamnolipid (Rha) were prepared by layer-by-layer shelf assembly method, and their properties were also evaluated. The results showed that Rha/SPI/Lut had the smallest particle size (206.24 nm) and highest loading ratio (8.03 μg/mg) while Rha/SSPS/SPI/Lut had the highest encapsulation efficiency (82.45 %). Rha interacted with SPI through hydrophobic interactions as the main driving force, while SSPS attached to SPI with only hydrogen bonding. Furthermore, the synergistic effect between Rha and SSPS was observed in Rha/SSPS/SPI/Lut complex, in consequence, it had the best thermal and storage stability, and the slowest release in gastrointestinal digestion. Thus, this approach provided an alternative way for the application of luteolin in functional foods.

New perspective on protein-based microcapsules as delivery vehicles for sensitive substances: A review

Sensitive substances have attracted wide attention due to their rich functional activities, such as antibiosis activities, antioxidant activities and prevent disease, etc. However, the low stability of sensitive substances limits their bioavailability and functional activities. Protein-based microcapsules can encapsulate sensitive substances to improve their adverse properties due to their good stability, strong emulsifying ability and wide source. Therefore, it is necessary to fully elaborate and summarize protein-based microcapsules to maximize their potential benefits in nutritional interventions. The focus of this review is to highlight the classification of protein-based microcapsules. In addition, the principles, advantages and disadvantages of preparation methods for protein-based microcapsules are summarized. Some novel preparation methods for protein-based microcapsules are also emphasized. Moreover, the mechanism of protein-based microcapsules that release sensitive substances in vitro is elucidated and summarized. Furthermore, the applications of protein-based microcapsules are outlined. Protein-based microcapsules can effectively encapsulate sensitive substances, which improve their bioavailability, and provide protective effects during storage and gastrointestinal digestion. In addition, microcapsules can improve the sensory quality of food and enhance its stability. The performance of protein-based microcapsules for delivering sensitive substances is influenced by factors such as protein type, the ratio between protein ratio and the other wall material, the preparation process, etc. Future research should focus on the new composite protein-based microcapsule delivery system, which can be applied to in vivo research and have synergistic effects and precise nutritional functions. In summary, protein-based microcapsules have broader research prospects in the functional foods and nutrition field.

The development of nanocarriers for natural products

Natural bioactive compounds from plants exhibit substantial pharmacological potency and therapeutic value. However, the development of most plant bioactive compounds is hindered by low solubility and instability. Conventional pharmaceutical forms, such as tablets and capsules, only partially overcome these limitations, restricting their efficacy. With the recent development of nanotechnology, nanocarriers can enhance the bioavailability, stability, and precise intracellular transport of plant bioactive compounds. Researchers are increasingly integrating nanocarrier-based drug delivery systems (NDDS) into the development of natural plant compounds with significant success. Moreover, natural products benefit from nanotechnological enhancement and contribute to the innovation and optimization of nanocarriers via self-assembly, grafting modifications, and biomimetic designs. This review aims to elucidate the collaborative and reciprocal advancement achieved by integrating nanocarriers with botanical products, such as bioactive compounds, polysaccharides, proteins, and extracellular vesicles. This review underscores the salient challenges in nanomedicine, encompassing long-term safety evaluations of nanomedicine formulations, precise targeting mechanisms, biodistribution complexities, and hurdles in clinical translation. Further, this study provides new perspectives to leverage nanotechnology in promoting the development and optimization of natural plant products for nanomedical applications and guiding the progression of NDDS toward enhanced efficiency, precision, and safety. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

The application of encapsulation technology in the food Industry: Classifications, recent Advances, and perspectives

Encapsulation technology has been extensively used to enhance the stability, specificity, and bioavailability of essential food ingredients. Additionally, it plays a vital role in improving product quality and reducing production costs. This study presents a comprehensive classification of encapsulation techniques based on the state of different cores (solid, liquid, and gaseous) and offers a detailed description and analysis of these encapsulation methods. Specifically, it introduces the diverse applications of encapsulation technology in food, encompassing areas such as antioxidant, protein activity, physical stability, controlled release, delivery, antibacterial, and probiotics. The potential impact of encapsulation technology is expected to make encapsulation technology a major process and research hotspot in the food industry. Future research directions include applications of encapsulation for enzymes, microencapsulation of biosensors, and novel technologies such as self-assembly. This study provides a valuable theoretical reference for the in-depth research and wide application of encapsulation technology in the food industry.

Oxidized dextran improves the stability and effectively controls the release of curcumin loaded in soybean protein nanocomplexes

Dextran dialdehyde (ODex) was added to a nanocomplex of soy protein isolate (SPI)-curcumin (Cur) to improve its stability and achieve controlled release of Cur. The SPI-to-ODex mass ratio was optimized to achieve excellent properties and stability. Interactions between various components were confirmed by spectroscopic analysis, and the effect of ODex on the stability and bioactivity of SPI-Cur colloids was discussed. ODex was found to be crosslinked with SPI via the Schiff base reaction, which increased the ζ-potential and improved the surface hydrophobicity of nanocomplexes. At a SPI-to-ODex mass ratio of 20:1, the nanocomplex had a smaller particle size (199.2 nm), higher ζ-potential (-45.48 mV), and higher encapsulation efficiency (96.25%). Furthermore, adding ODex changed the network structure and effectively improved the thermal and storage stability of Cur as well as its antioxidant properties. Moreover, controlled release of Cur was observed during simulated digestion in the gastrointestinal environment.

Structured soft particulate matters for delivery of bioactive compounds in foods and functioning in the colon

The present review discusses challenges, perspectives, and current needs of delivering bioactive compounds (BCs) using soft particulate matters (SPMs) for gut health. SPMs can entrap BCs for incorporation in foods, preserve their bioactivities during processing, storage, and gastrointestinal digestion, and deliver BCs to functioning sites in the colon. To enable these functions, physical, chemical, and biological properties of BCs are integrated in designing various types of SPMs to overcome environmental factors reducing the bioavailability and bioactivity of BCs. The design principles are applied using food grade molecules with the desired properties to produce SPMs by additionally considering the cost, sustainability, and scalability of manufacturing processes. Lastly, to make delivery systems practical, impacts of SPMs on food quality are to be evaluated case by case, and health benefits of functional foods incorporated with delivery systems are to be confirmed and must outweigh the cost of preparing SPMs.

The Nanotech Potential of Curcumin in Pharmaceuticals: An Overview

It is safe to use Curcumin as a cosmetic and therapeutic ingredient in pharmaceutical products. For the uses mentioned above and for fundamental research, it is essential to obtain pure Curcumin from plant sources. There is a requirement for effective extraction and purification techniques that adhere to green chemistry standards for efficiency improvement, process safety, and environmental friendliness. Several outstanding studies have looked into the extraction and purification of Curcumin. This review thoroughly covers the currently available curcumin extraction, synthesis, and transformation techniques. Additionally, Curcumin's poor solubility and low absorption in the human body have limited its potential for pharmaceutical use. However, recent developments in novel curcumin formulations utilizing nanotechnology delivery methods have provided new approaches to transport and maximize the human body's curcumin absorption efficiency. In this review, we explore the various curcumin nanoformulations and the potential medicinal uses of nano curcumin. Additionally, we review the necessary future research directions to recommend Curcumin as an excellent therapeutic candidate.

pH-driven preparation of pea protein isolate-curcumin nanoparticles effectively enhances antitumor activity

Soluble pea protein isolate-curcumin nanoparticles were successfully prepared at a novel pH combination, with encapsulation efficiency and drug loading amount of 95.69 ± 1.63 % and 32.73 ± 0.56 μg/mg, respectively, resulting in >4000-fold increase in the water solubility of curcumin. The encapsulation propensity and interaction mechanism of pea protein isolates with curcumin and colchicine were comparatively evaluated by structural characterization, molecular dynamics simulations and molecular docking. The results showed that the nanoparticles formed by curcumin and colchicine with pea protein isolates were mainly driven by hydrogen bonding and hydrophobic interactions, and the binding process did not alter the secondary structure of pea protein. In contrast, pea protein isolate-curcumin nanoparticles exhibited smaller particle size, lower RMSD value, lower binding Gibbs free energy and greater structural stability. Therefore, pea protein isolate is a suitable encapsulation material for hydrophobic compounds. Furthermore, the pea protein isolate-curcumin nanoparticles showed remarkably enhanced antitumor activity, as evidenced by a significant reduction in IC50, and the anti-tumor mechanism of it involved the ROS-induced mitochondria-mediated caspase cascade apoptosis pathway. These findings provide insights into the development of pea protein-based delivery systems and the possibility of a broader application of curcumin in antitumor activity.

Application of soy protein isolate-xylose conjugates for improving the viability and stability of probiotics microencapsulated by spray drying

BACKGROUND

Production and consumption of probiotics need to meet many adverse stresses, which can reduce their health-promoting effects on humans. Microencapsulation is an effective technique to improve the biological activity of probiotics and wall materials are also required during encapsulation. Application of Maillard reaction products (MRPs) in probiotic delivery is increasing.

RESULTS

This work aims to study the effects of soy protein isolate (SPI)-xylose conjugates heated at different times on the viability and stability of probiotics. SPI-xylose MRPs formed after heat treatment based on changes in the browning intensity, sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Fourier transform infrared spectroscopy. After heat treatment, α-helix and β-sheet contents of SPI-xylose mixture shifted from 11.3% and 31.3% to 6.4-11.0% and 31.0-36.9%, respectively, and the thermal stability slightly changed. During spray drying, except for MRP240@LAB, probiotic viability was higher in the MRP-based probiotic microcapsules (21.36-25.31%) than in Mix0@LAB (20.17%). MRP-based probiotic microcapsules had smaller particle sizes (431.1-1243.0 nm vs. 7165.0 nm) and greater intestinal digestion tolerance than Mix0@LAB. Moreover, the MRP-based probiotic microcapsules showed better storability than Mix0@LAB and adequate growth and metabolism capacity.

CONCLUSION

SPI-xylose Maillard reaction products are a promising wall material for probiotics microencapsulation, which can improve bacterial survivability during spray drying and enhance bacterial gastrointestinal digestion resistance. This study sheds light on preparing probiotic microcapsules with superior properties by spray drying. © 2023 Society of Chemical Industry.

The food and biomedical applications of curcumin-loaded electrospun nanofibers: A comprehensive review

Encapsulating curcumin (CUR) in nanocarriers such as liposomes, polymeric micelles, silica nanoparticles, protein-based nanocarriers, solid lipid nanoparticles, and nanocrystals could be efficient for a variety of industrial and biomedical applications. Nanofibers containing CUR represent a stable polymer-drug carrier with excellent surface-to-volume ratios for loading and cell interactions, tailored porosity for controlled CUR release, and diverse properties that fit the requirements for numerous applications. Despite the mentioned benefits, electrospinning is not capable of producing fibers from multiple polymers and biopolymers, and the product's effectiveness might be affected by various machine- and material-dependent parameters like the voltage and the flow rate of the electrospinning process. This review delves into the current and innovative recent research on nanofibers containing CUR and their various applications.

Characterizations of food-derived ellagic acid-Undaria pinnatifida polysaccharides solid dispersion and its benefits on solubility, dispersity and biotransformation of ellagic acid

The current study was aimed to enhance the solubility, dispersibility and biotransformation efficacy of ellagic acid (EA) by preparing food-derived ellagic acid-Undaria pinnatifida polysaccharides solid dispersion (EA/UPP SD). The results demonstrated that the solubility of EA/UPP SD was improved from 0.014 mg/mL to 0.383 mg/mL, and the enhancement was related to converting to a more amorphous state and restraining its self-aggregation during the mechanochemical process. The structure of EA/UPP SDs was mostly maintained by hydrogen bonds and hydrophobic interactions between EA and UPP. Moreover, the result of in vitro anaerobic incubations showed the biotransformation process was improved with EA/UPP SD addition to substrate due to the advance of microbial accessibility in EA dispersion. Altogether, these results indicated that the EA/UPP SDs expanded the application of EA by increasing the solubility and dispersity, and provided a theoretical basis for bioconversion efficiency enhancement.

Characterization, stability and antioxidant activity of curcumin nanocomplexes with soy protein isolate and pectin

Curcumin (Cur) has antioxidant, anti-inflammatory and other biological activities, but its poor stability, low water solubility and other defects limit the application. Herein, Cur was nanocomposited with soy isolate protein (SPI) and pectin (PE) for the first time and its characterization, bioavailability and antioxidant activity were discussed. The optimal encapsulation process of SPI-Cur-PE was as follow: the addition amount of PE was 4 mg, Cur was 0.6 mg and at pH of 7. It was observed by SEM that SPI-Cur-PE were partially aggregated. The average particle size of SPI-Cur-PE was 210.1 nm and the zeta potential was -31.99 mV. Through XRD, FT-IR and DSC analysis, the SPI-Cur-PE was formed through hydrophobic interaction and electrostatic interaction. The SPI-Cur-PE released more slowly in simulated gastrointestinal treatment and displayed higher photostability and thermal stability. SPI-Cur-PE, SPI-Cur and free Cur had scavenging activities for 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 1,1-diphenyl-2-picryl-hydrazyl (DPPH) radicals.

Novel Hybrid Inulin-Soy Protein Nanoparticles Simultaneously Loaded with (-)-Epicatechin and Quercetin and Their In Vitro Evaluation

(-)-Epicatechin and quercetin have attracted considerable attention for their potential therapeutic application in non-communicable chronic diseases. A novel hybrid inulin-soy protein nanoparticle formulation was simultaneously loaded with (-)-epicatechin and quercetin (NEQs) to improve the bioavailability of these flavonoids in the human body, and NEQs were synthesized by spray drying. After process optimization, the physicochemical and functional properties of NEQs were characterized including in vitro release, in vitro gastrointestinal digestion, and cell viability assays. Results showed that NEQs are an average size of 280.17 ± 13.42 nm and have a zeta potential of -18.267 ± 0.83 mV in the organic phase. Encapsulation efficiency of (-)-epicatechin and quercetin reached 97.04 ± 0.01 and 92.05 ± 1.95%, respectively. A 3.5% soy protein content conferred controlled release characteristics to the delivery system. Furthermore, NEQs presented inhibitory effects in Caco-2, but not in HepG-2 and HDFa cell lines. These results contribute to the design and fabrication of inulin-soy protein nanoparticles for improving the bioavailability of multiple bioactive compounds with beneficial properties.

Polysaccharides, proteins, and their complex as microencapsulation carriers for delivery of probiotics: A review on carrier types and encapsulation techniques

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

Self-assembled emulsion gel based on modified chitosan and gelatin: Anti-inflammatory and improving cellular uptake of lipid-soluble actives

To obtain a green carrier for intestinal targeted delivery, an emulsion gel was designed by the self-assembly between gelatin and Pickering emulsion based on gallic acid modified-chitosan nanoparticles (GCS NPs). The emulsion gels loaded with garlic essential oil (Geo) and curcumin (Cur) were abbreviated as GOEG and GCEG, respectively. Meanwhile, the sodium alginate bead loaded with Geo (GOEGS₃) and the bead loaded with Cur (GCEGS) were prepared as controls. Results demonstrated that the emulsion gels significantly improved the bioaccessibility of Geo and Cur, showing great intestinal targeting delivery properties comparable to that of sodium alginate beads. Moreover, Caco-2 cell experiments indicated that GOEG and GCEG displayed good biocompatibility and enhanced cellular uptake of Geo and Cur. The emulsion gels also exhibited excellent anti-inflammatory properties in the lipopolysaccharide-induced cell model, exhibiting great potential for clinical application. This work provides some references for the preparation of multifunctional emulsion gels with excellent delivery performance by a green method.

Emerging plant proteins as nanocarriers of bioactive compounds

The high prevalence of chronic illnesses, including cancer, diabetes, obesity, and cardiovascular diseases has become a growing concern for modern society. Recently, various bioactive compounds (bioactives) are shown to have a diversity of health-beneficial impacts on a wide range of disorders. But the application of these bioactives in food and pharmaceutical formulations is limited due to their poor water solubility and low bioaccessibility/bioavailability. Plant proteins are green alternatives for designing biopolymeric nanoparticles as appropriate nanocarriers thanks to their amphiphilic nature compatible with many bioactives and unique functional properties. Recently, emerging plant proteins (EPPs) are employed as nanocarriers for protection and targeted delivery of bioactives and also improving their stability and shelf-life. EPPs could enhance the solubility, stability, and bioavailability of bioactives by different types of delivery systems. In addition, the use of EPPs in combination with other biopolymers like polysaccharides was found to make a favorable wall material for food bioactives. This review article covers the various sources and importance of EPPs along with different encapsulation techniques of bioactives. Characterization of EPPs for encapsulation is also investigated. Furthermore, the focus is on the application of EPPs as nanocarriers for food bioactives.

Use of maltodextrin, sweet potato flour, pectin and gelatin as wall material for microencapsulating Lactiplantibacillus plantarum by spray drying: Thermal resistance, in vitro release behavior, storage stability and physicochemical properties

Different plant products and co-products have been studied as wall materials for the microencapsulation of probiotics due to the need for new lost-cost, abundant, and natural materials. In this study, microparticles were developed by spray drying using different combinations of conventional materials such as maltodextrin, pectin, gelatin, and agar-agar with unconventional materials such as sweet potato flour to microencapsulate Lactiplantibacillus plantarum. The microparticles obtained were evaluated for encapsulation efficiency, thermal resistance, and rupture test. The most resistant microparticles were characterized and evaluated for probiotic viability during storage and survival to in vitro gastrointestinal conditions. Microparticles A (10 % maltodextrin, 5 % sweet potato flour, and 1 % pectin) and B (10 % maltodextrin, 4 % sweet potato flour, and 2 % gelatin) showed high thermal resistance (>59 %) and survival in acidic conditions (>80 %). L. plantarum in microparticles A and B remained viable with counts > 6 log CFU.g^-1 for 45 days at 8 °C and -18 °C and resisted in vitro gastrointestinal conditions after processing with counts of 8.38 and 9.10 log CFU.g^-1, respectively. Therefore, the selected microparticles have great potential for application in different products in the food industry, as they promote the protection and distribution of probiotic microorganisms.

Soy proteins as vehicles for enhanced bioaccessibility and cholesterol-lowering activity of phytosterols

BACKGROUND

The formulation of phytosterol (PS)-enriched functional foods has attracted increasing interest in the recent years, owing to its potential health effects. However, the poor solubility and bioavailability greatly limit PS application in this regard. This study investigated whether soy protein isolate (SPI) could effectively perform as a nanocarrier for improving the water solubility, bioaccessibility, and cholesterol-lowering activity of PSs.

RESULTS

In this work, we fabricated SPI-PS nanocomplexes, which not only can enhance the stability and bioaccessibility of PS, but also improve the cholesterol-lowering ability of SPI. This improvement was mainly due to the formation of protein-active substance complexes, through hydrophobic interactions. The complexation with PSs resulted in formation of nanosized particles with greater sizes, lower ζ-potential, and higher surface hydrophobicity. The encapsulation efficiency, loading amount, and solubility of PS were closely related to the applied PS concentration in the mixed dispersions, and the maximal PS solubility in the aqueous phase reached about 1.63 mg mL^-1 at the highest PS concentration (2.0 mg mL^-1 ). The PS molecules in the nanocomplexes were mainly present in the amorphous form. The enhanced in vitro cholesterol-lowering activity of PS nanocomplexes relative to free PS seemed to be closely related to its higher bioaccessibility.

CONCLUSION

The findings are of relevance for the development of food-grade PS ingredients suitable for the formulations of PS-enriched functional foods. © 2022 Society of Chemical Industry.

Microencapsulation by a Spray Drying Approach to Produce Innovative Probiotics-Based Products Extending the Shelf-Life in Non-Refrigerated Conditions

Recently, there has been a growing interest in producing functional foods containing encapsulated probiotic bacteria due to their positive effects on human health. According to their perceived health benefits, probiotics have been incorporated into a range of dairy products, but the current major challenge is to market new, multicomponent probiotic foods and supplements. Nevertheless, only a few products containing encapsulated probiotic cells can be found as non-refrigerated products. In this work, spray drying technology was investigated in order to produce an innovative nutraceutical formulation based on lactic acid bacteria (LAB), and was able to ensure a good storage stability of probiotics (no less than 109 CFU/cps) in non-refrigerated conditions. Probiotic-loaded microparticles from spray drying experiments were produced under different conditions and compared by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and the enumeration of the number of viable cells in order to identify the formulation exhibiting the most promising characteristics. Results from the dissolution test revealed that the optimized formulation provides a suitable amount of living cells after digestion of microparticles stored for 12 months at room temperature and confirmed that the microencapsulation process by spray drying ensures a good protection of probiotics for nutraceutical purposes.

Dual improvement in curcumin encapsulation efficiency and lyophilized complex dispersibility through ultrasound regulation of curcumin-protein assembly

Ultrasound has a recognized ability to modulate the structure and function of proteins. Discovering the influential mechanism of ultrasound on the intramolecular interactions of egg-white protein isolate-curcumin (EPI-Cur) nanoparticles and their intermolecular interaction during freeze drying and redispersion is meaningful. In this study, under the extension of pre-sonication time, the protein solubility, surface hydrophobicity, and curcumin encapsulation rate showed an increasing trend, reaching the highest value at 12 min of treatment. However, the values decreased under the followed extension of ultrasound time. After freeze drying and redispersion were applied, the EPI-Cur sample under 12 min of ultrasound treatment exhibited minimal aggregation degree and loss of curcumin. The retention and loading rates of curcumin in the lyophilized powder reached 96 % and 33.60 mg/g EPI, respectively. However, under excessive ultrasound of >12 min, scanning electron microscopy showed distinct blocky aggregates. Overexposure of the hydrophobic region of the protein triggered protein-mediated hydrophobic aggregation after freeze drying. X-ray diffraction patterns showed the highest crystallinity, indicating that the free curcumin-mediated hydrophobic aggregation during freeze drying was enhanced by the concentration effect and intensified the formation of larger aggregates. This work has practical significance for developing the delivery of hydrophobic active substances. It provides theoretical value for the dynamic dispersity change in protein-hydrophobic active substances during freeze drying and redissolving.

Recent Developments in the Microencapsulation of Fish Oil and Natural Extracts: Procedure, Quality Evaluation and Food Enrichment

Due to the beneficial health effects of omega-3 fatty acids and antioxidants and their limited stability in response to environmental and processing factors, there is an increasing interest in microencapsulating them to improve their stability. However, despite recent developments in the field, no specific review focusing on these topics has been published in the last few years. This work aimed to review the most recent developments in the microencapsulation of fish oil and natural antioxidant compounds. The impact of the wall material and the procedures on the quality of the microencapsulates were preferably evaluated, while their addition to foods has only been studied in a few works. The homogenization technique, the wall-material ratio and the microencapsulation technique were also extensively studied. Microcapsules were mainly analyzed for size, microencapsulation efficiency, morphology and moisture, while in vitro digestion, flowing properties, yield percentage and Fourier transform infrared spectroscopy (FTIR) were used more sparingly. Findings highlighted the importance of optimizing the most influential variables of the microencapsulation procedure. Further studies should focus on extending the range of analytical techniques upon which the optimization of microcapsules is based and on addressing the consequences of the addition of microcapsules to food products.

Strategies for Improving Bioavailability, Bioactivity, and Physical-Chemical Behavior of Curcumin

Curcumin (CCM) is one of the most frequently explored plant compounds with various biological actions such as antibacterial, antiviral, antifungal, antineoplastic, and antioxidant/anti-inflammatory properties. The laboratory data and clinical trials have demonstrated that the bioavailability and bioactivity of curcumin are influenced by the feature of the curcumin molecular complex types. Curcumin has a high capacity to form molecular complexes with proteins (such as whey proteins, bovine serum albumin, β-lactoglobulin), carbohydrates, lipids, and natural compounds (e.g., resveratrol, piperine, quercetin). These complexes increase the bioactivity and bioavailability of curcumin. The current review provides these derivatization strategies for curcumin in terms of biological and physico-chemical aspects with a strong focus on different type of proteins, characterization methods, and thermodynamic features of protein–curcumin complexes, and with the aim of evaluating the best performances. The current literature review offers, taking into consideration various biological effects of the CCM, a whole approach for CCM-biomolecules interactions such as CCM-proteins, CCM-nanomaterials, and CCM-natural compounds regarding molecular strategies to improve the bioactivity as well as the bioavailability of curcumin in biological systems.

Impact of emulsifiers for the nanoencapsulation with maltodextrin of cannabis oil by spray drying on the physicochemical properties and bioaccessibility of cannabinoids

Our study aimed to investigate the impact of various emulsifiers, namely whey protein isolate (WPI), soy protein isolate (SPI), and Tween 80 (Tw), on their ability to encapsulate cannabis oil with maltodextrin as the wall material. The physicochemical properties of the powder, the stability of the cannabinoids, and their bioaccessibility during static in vitro digestion were examined. The average diameter of fat globules in liquid nanoemulsions was 170, 259, and 95 nm for WPI, SPI, and Tw, respectively. The encapsulation efficiency was high for protein emulsifiers (>95%) compared to Tw (∼16%). Upon powder reconstitution in water, the emulsified fat droplets remained stable for WPI (176 nm); however, higher fat globule size (diameters of 346 nm and 210 nm) was observed for SPI and Tw powders, respectively. All oil powders had high solubility (>97%). The peroxide value (PV) showed nearly a fourfold increase for the oil extracted from the powder than the initial PV of bulk oil (5.2 mEq). However, UPLC-TUV analysis of the main cannabinoids (CBD, THC, and CBN) indicated that there is no significant difference between the various formulations and the bulk oil, except for lower Tw. The in vitro digestion model results showed higher bioaccessibility of the cannabinoids for Tw (∼53%) than for proteins (WPI ∼ 7% and SPI ∼ 10%). These findings suggest that the emulsifiers used for spray drying nanoencapsulation of cannabis oil have an impact on the encapsulation efficiency and cannabinoid bioaccessibility, highlighting the importance of choosing adequate emulsifiying agents for their optimal oral delivery.

Preparation and Characterization of Rutin–Loaded Zein–Carboxymethyl Starch Nanoparticles

In this work, rutin (RT)–loaded zein–carboxymethyl starch (CMS) nanoparticles were successfully prepared by the antisolvent precipitation method. The effect of CMS on composite nanoparticles at different concentrations was studied. When the ratio of zein–RT–CMS was 10:1:30, the encapsulation efficiency (EE) was the highest, reaching 73.5%. At this ratio, the size of the composite nanoparticles was 196.47 nm, and the PDI was 0.13, showing excellent dispersibility. The results of fluorescence spectroscopy, FTIR, XRD, and CD showed that electrostatic interaction, hydrogen bonding, and hydrophobic interaction were the main driving forces for the formation of nanoparticles. It can be seen from the FE–SEM images that the zein–RT–CMS nanoparticles were spherical. With the increase in the CMS concentration, the particles gradually embedded in the cross–linked network of CMS (10:1:50). After RT was loaded on zein–CMS nanoparticles, the thermal stability and pH stability of RT were improved. The results showed that zein–CMS was an excellent encapsulation material for bioactive substances.

Influence of Proteins on the Absorption of Lipophilic Vitamins, Carotenoids and Curcumin - A Review

While proteins have been widely used to encapsulate, protect, and regulate the release of bioactive food compounds, little is known about the influence of co-consumed proteins on the absorption of lipophilic constituents following digestion, such as vitamins (A, D, E, K), carotenoids, and curcumin. Their bioavailability is often low and very variable, depending on the food matrix and host factors. Some proteins can act as emulsifiers during digestion. Their liberated peptides have amphiphilic properties that can facilitate the absorption of microconstituents, by improving their transition from lipid droplets into mixed micelles. Contrarily, the less well digested proteins could negatively impinge on enzymatic accessibility to the lipid droplets, slowing down their processing into mixed micelles and entrapping apolar food compounds. Interactions with mixed micelles and proteins are also plausible, as shown earlier for drugs. This review focuses on the ability of proteins to act as effective emulsifiers of lipophilic vitamins, carotenoids, and curcumin during digestion. The functional properties of proteins, their chemical interactions with enzymes and food constituents during gastro-intestinal digestion, potentials and limitations for their use as emulsifiers are emphasized and data from human, animal, and in vitro trials are summarized.

Fabrication and characterization of octenyl succinic anhydride modified pullulan micelles for encapsulating curcumin

BACKGROUND

Curcumin has become increasingly popular in functional foods and beverages field as a result of its high biological activity. Nevertheless, the application of curcumin is usually limited by its poor water solubility, low absorption, rapid metabolism and instability. Accordingly, the development of an appropriate wall material is crucial for its effective use. In the present study, curcumin-octenyl succinic anhydride modified pullulan (Cur-OSAP) micelles were successfully prepared by an anti-solvent co-precipitation method.

RESULTS

Octenyl succinic anhydride modified pullulan (OSAP) micelles exhibited the highest encapsulation efficiency (57.31%) and loading capacity (5.73%) of curcumin when the mass ratio of OSAP to curcumin was 10:1 and the degree of substitution of OSAP was 0.0469, at which point Cur-OSAP micelles formed via hydrogen binding and hydrophobic interactions, as confirmed by Fourier transform infrared and fluorescence techniques. The transmission electron microscopy results showed that the Cur-OSAP micelles were roughly spherical in shape with diameters in the approximate range 30-60 nm.

CONCLUSION

The encapsulation of OSAP greatly improved photostability and sustained release properties of curcumin in Cur-OSAP micelles. These findings suggest that OSAP can be used as a carrier to encapsulate and protect hydrophobic food ingredients. © 2021 Society of Chemical Industry.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Potato protein: current review of structure, technological properties, and potential application on spray drying microencapsulation

Studies regarding spray drying microencapsulation are aplenty available; especially focusing on processing parameters, microparticle characteristics and encapsulation efficiency. Hence, there is a rising interest in tailoring wall materials aiming to improve the process's effectiveness. Reflecting a market trend in the food industry, plant-based proteins are emerging as alternative protein sources, and their application adaptability is an increasing research of interest related to consumers' demand for healthy food, product innovation, and sustainability. This review presents a perspective on the investigation of potato protein as a technological ingredient, considering it a nonconventional source obtained as by-product from starch industry. Furthermore, this piece emphasizes the potential application of potato protein as wall material in spray drying encapsulation, considering that this purpose is still limited for this ingredient. The literature reports that vegetal-based proteins might present compromised functionality due to processing conditions, impairing its technological application. Structural modification can offer a potential approach to modify potato protein configuration aiming to improve its utilization. Studies reported that modified proteins can perform as better emulsifiers and antioxidant agents compared to intact proteins. Hence, it is expected that their use in microencapsulation would improve process efficiency and protection of the core material, consequently delivering superior encapsulation performance.

Effects of different surfactants on the conjugates of soybean protein-polyphenols for the preparation of β-carotene microcapsules

In this study, we investigated the spray-drying microencapsulation of β-carotene in oil co-stabilized by soy protein isolate-epigallocatechin-3-gallate conjugate (SPE) and small molecule surfactants [sodium dodecyl sulfate (SDS), hexadecyl trimethyl ammonium bromide (CTAB), and tea saponin (TS)] of different concentrations [0.1, 0.5, and 1.0% (w/v)], as a prospective approach to stabilize β-carotene. The results show that different surfactant types and concentrations significantly affect the encapsulation efficiency, water dispersibility, microstructure, and digestion of the microcapsules. Interactions between the surfactants and the SPE at the interface were found to include both synergistic and competitive effects, and they depended on the surfactant type and concentration. Moreover, the addition of SDS and TS before spray drying significantly improved the microencapsulation performance of the microcapsules and the water dispersion behavior of the corresponding spray-dried powders. The highest encapsulation efficiency was achieved for the SPE-0.1TS-encapsulated β-carotene microcapsules. In contrast, the addition of CTAB was not conducive to microcapsule formation, resulting in poor encapsulation efficiency, water dispersibility, thermal stability, β-carotene retention rate, and oxidation stability. In vitro gastrointestinal digestion results revealed that the addition of CTAB promotes the release of β-carotene and improves the bioaccessibility of β-carotene. In contrast, except for SPE-1.0SDS, the addition of SDS and TS inhibited β-carotene release and reduced β-carotene bioaccessibility. This study demonstrated that this novel β-carotene encapsulation formulation can overcome stability limitations for the development of β-carotene supplements with a high bioaccessibility.

Preparation of Pickering emulsion based on soy protein isolate-gallic acid with outstanding antioxidation and antimicrobial

This study investigated a novel antioxidant and antimicrobial Pickering emulsion stabilized by soy protein isolate (SPI) and gallic acid (GA) as an excellent protective delivery medium for lipophilic functional food. SPI-GA complex nanoparticles were fabricated by a covalent cross-linking mechanism under alkaline conditions with a small particle size (42.93-24.91 nm) and high zeta potential (26.92-38.58 -mV), which led to improved stability at high GA concentrations. Without the addition of preservatives, it was found that SPI-GA complex nanoparticles have a certain antimicrobial ability. Using these nanoparticles as the only stabilizers, outstanding antioxidant and antimicrobial Pickering emulsions could be easily prepared, and they had a small droplet size (948.09-457.82 nm), great stability and inhibited lipid peroxidation and antibacterial ability. Oxidation and microbial protection proceeded in a GA concentration-dependent manner. This study provides a novel way to prepare functionalized Pickering emulsions as delivery media for functional lipophilic raw materials.

Microencapsulation of nattokinase from fermentation by spray drying: Optimization, comprehensive score, and stability

Nattokinase from fermentation has recently gained more attention due to its beneficial effects on cardiovascular system. However, the instability of free nattokinase limits its application. The aim of the study was to develop a spray-drying microencapsulation process to obtain the nattokinase powder with high activity, high quality, and strong storage stability. Hence, the microencapsulation process of nattokinase from fermentation by spray drying was optimized. Experiments of single-factor and response surface methodology were used to assess the comprehensive scores and nattokinase activities. According to single-factor and response surface methodology results, optimum parameters of microencapsulation process of the nattokinase power by spray drying were 30% of mass ratio of wall materials, 139°C of air inlet temperature, 8 L/h of feed rate, and 80°C of outlet temperature. The final optimized result encompassed a comprehensive score of 96, nattokinase activity of 1,340 IU/ml, and moisture content of 4.1 ± 0.1%. In addition, the microencapsulated nattokinase power showed strong storage stability in the conditions of different temperatures and pH. After 30 days of storage, the nattokinase powder was still white or light yellow, with a special smell, no peculiar smell and paste taste, and no impurity. These results build the basis of further industrialization of the nattokinase powder from fermentation broth by spray drying.

Development and characterization of soybean protein isolate and fucoidan nanoparticles for curcumin encapsulation

Curcumin (Cur) is a natural polyphenol with beneficial biological and pharmacological activities; however, it has limited applications owing to its low solubility and light sensitivity. The protein-polysaccharide complex can effectively embed lipid-soluble drugs to increase their stability and dispensability in aqueous solutions. Soybean protein isolate (Spi) and fucoidan (Fuc) were used as a polymer matrix, and core-shell nanoparticles were prepared to encapsulate Cur via electrostatic interaction under acidic and neutral conditions. The structure of the Spi-Fuc nanoparticles was studied via Fourier-transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscopy. Concurrently, we evaluated the efficacy of the nanoparticles based on stability, drug loading rate, and simulated release. Our results showed that the Spi-Fuc nanoparticles (size, approximately 236.56 nm) had a spherical, core-shell structure and that they could effectively load Cur with an embedding efficiency of >95%; moreover, the system had long-term dispersion stability. Thus, we provide a simple method for Cur delivery, which can also be potentially used for delivering lipid-soluble active ingredients.

Innovative Technologies for Extraction and Microencapsulation of Bioactives from Plant-Based Food Waste and their Applications in Functional Food Development

The by-products generated from the processing of fruits and vegetables (F&V) largely are underutilized and discarded as organic waste. These organic wastes that include seeds, pulp, skin, rinds, etc., are potential sources of bioactive compounds that have health imparting benefits. The recovery of bioactive compounds from agro-waste by recycling them to generate functional food products is of increasing interest. However, the sensitivity of these compounds to external factors restricts their utility and bioavailability. In this regard, the current review analyses various emerging technologies for the extraction of bioactives from organic wastes. The review mainly aims to discuss the basic principle of extraction for extraction techniques viz. supercritical fluid extraction, subcritical water extraction, ultrasonic-assisted extraction, microwave-assisted extraction, and pulsed electric field extraction. It provides insights into the strengths of microencapsulation techniques adopted for protecting sensitive compounds. Additionally, it outlines the possible functional food products that could be developed by utilizing components of agricultural by-products. The valorization of wastes can be an effective driver for accomplishing food security goals.

pH - Responsive colloidal carriers assembled from β-lactoglobulin and Epsilon poly-L-lysine for oral drug delivery

Site specific oral delivery of many biopharmaceutical classification system (BCS) class II and IV drugs is challenging due to their poor solubility, low permeability and degradation in the gastrointestinal tract. Whilst colloidal carriers have been used to improve the bioavailability of such drugs, most nanocarriers based drug delivery systems suffer from multiple disadvantages, including low encapsulation efficiency (liposomes, polymeric nanoparticles), complex synthesis methods (silica, silicon-based materials) and poorly understood biodegradability (inorganic nanoparticles). Herein, a novel pH responsive nanocolloids were self-assembled using natural compounds such as bovine β-lactoglobulin (BLG) and succinylated β-lactoglobulin (succ. BLG) cross-linked with epsilon poly l-lysine (BCEP and BCP), and found to possess high loading capacity, high aqueous solubility and site-specific oral delivery of a poorly soluble nutraceutical (curcumin), improving its physicochemical properties and biological activity in-vitro and ex-vivo. Our optimized synthesis formed colloids of around 200 nm which were capable of encapsulating curcumin with ~100% encapsulation efficiency and ~10% w/w drug loading. By forming nanocomplexes of curcumin with BLG and succ. BLG, the aqueous solubility of curcumin was markedly increased by ~160-fold and ~86-fold, respectively. Encapsulation with BLG increased the solubility, whereas succ. BLG prevent release of encapsulated curcumin when subjected to gastric fluids as it is resistant to breakdown on exposure to pepsin at acidic pH. In conditions mimicking the small intestine, Succ. BLG was more soluble resulting in sustained release of the encapsulated drug at pH 7.4. Additionally, crosslinking succ. BLG with E-PLL significantly enhanced curcumin's permeability in an in-vitro Caco-2 cell monolayer model compared to curcumin solution (dissolved in 1% DMSO), or non-crosslinked BLG/succ. and BLG. In a mouse-derived intestinal epithelial 3D organoid culture stimulated with IL-1β, BLG-CUR and crosslinked BCEP nanoparticles reduced the production of inflammatory cytokines and chemokines such as Tnfα and Cxcl10 more than curcumin solution or suspension while these nanoparticles were non-toxic to organoids. Overall this work demonstrates the promise of nutraceutical-based hybrid self-assembled colloidal system to protect hydrophobic drugs from harsh gastrointestinal conditions and improve their solubility, dissolution, permeability and biological activity.