Plant proteins from green pea and chickpea: Extraction, fractionation, structural characterization and functional properties

Experimental investigation into the implications of low-intensity magnetic field treatment on the structural and functional properties of rapeseed meal during biofermentation

The functionality of rapeseed meal is limited, to acquire more utilization, the functional attributes were improved by altering its structural features using magnetic field-assisted solid fermentation. The magnetic treatment was performed every 24 h (specifically at 24, and 48 h), each treatment having a duration of 4 h. The magnetic intensity was set at 120 Gs, and the fermentation temperature 37 °C. Magnetic field-assisted solid fermentation resulted in higher surface hydrophobicity, fluorescence intensity, UV absorption, and sulfhydryl groups of rapeseed meal. Magnetic field treatment considerably enhanced solubility, antioxidant activity, emulsifying activity, and stability by 8.8, 19.5, 20.7, and 12.3 %, respectively. Magnetic field-assisted solid fermentation also altered rapeseed meal structure, as shown by scanning electron microscopy, atomic force microscopy, and Raman spectroscopy outcomes. Correlation analysis displayed positive interrelationships between functional characteristics, and surface hydrophobicity, β-sheets, and polydispersity index.

Comparative study on composition and functional properties of brewer's spent grain proteins precipitated by citric acid and hydrochloric acid

Brewer's spent grain (BSG) is an abundant agro-industrial residue and a sustainable low-cost source for extracting proteins. The composition and functionality of BSG protein concentrates are affected by extraction conditions. This study examined the use of citric acid (CA) and HCl to precipitate BSG proteins. The resultant protein concentrates were compared in terms of their composition and functional properties. The BSG protein concentrate precipitated by CA had 10% lower protein content, 5.8% higher carbohydrate, and 5.4% higher lipid content than the sample precipitated by HCl. Hydrophilic/hydrophobic protein and saturated/unsaturated fatty acid ratios increased by 16.9% and 26.5% respectively, in the sample precipitated by CA. The formation of CA-cross-linkages was verified using shotgun proteomics and Fourier transform infrared spectroscopy. Precipitation by CA adversely affected protein solubility and emulsifying properties, while improving foaming properties. This study provides insights into the role of precipitants in modulating the properties of protein concentrates.

Solubility, (micro)structure, and in vitro digestion of pea protein dispersions as affected by high pressure homogenization and environmental conditions

In this work, dispersions were prepared with commercial pea protein isolate (PPI) and subjected to different (i) high pressure homogenization (HPH) intensities (0 - 200 MPa) (room temperature, pH 7) or (ii) environmental conditions (60 °C, pH 7 or pH 12) to generate dispersions with distinct protein molecular and microstructural characteristics, impacting protein solubility. Besides, protein digestion was analyzed following the static INFOGEST in vitro digestion protocol. Generally, increasing pressure of the homogenization treatment was linked with decreasing particle sizes and enhanced protein digestion. More specifically, the dispersion that did not undergo HPH (0 MPa) as well as the dispersion treated at 60 °C, pH 7, had highly similar microstructures, consisting of large irregular particles (10 - 500 µm) with shell-like structures, and exhibited low solubility (around 15 % and 28 %, respectively), which resulted in limited proteolysis (35 % and 42 %, respectively). In contrast, the dispersion subjected to HPH at 100 MPa and the dispersion treated at 60 °C, pH 12 also had similar microstructures with small and homogeneous particles (<1 µm), and exhibited relatively good solubility (54 % and 31 %, respectively), which led to enhanced protein digestion levels (87 % and 74 %, respectively). This study highlights the potential of food processing on macronutrient (micro)structure and further gastrointestinal stability and functionality.

Effect of extraction method on the calcium binding capacity of faba bean globulin fractions at various pH

Faba bean ingredients are rich in proteins and good sources of calcium (Ca), although containing phytic acid (PA) molecules. PA, a polyphosphate compound, can affect the bioavailability of minerals/proteins through complex formation. This study evaluates the impact of two extraction processes, Alkaline Extraction-IsoElectric Precipitation (AE-IEP) and Sequential Extraction (SE), on the ability of faba bean globulin systems to bind added calcium ions. Increasing concentrations of CaCl2 were introduced into 2.5% (w/v) protein dispersions at pHs 4.5, 5.5, 6.5, and 7.5, and free Ca monitored. Near the isoelectric point of globulin (pH ∼ 4-5), Ca binding capacity was found to be low. At higher pHs, significant Ca chelation occurred, initially attributed to free PA binding sites, resulting in the formation of insoluble complexes and subsequent protein precipitation. The AE-IEP globulin fraction exhibited a higher Ca binding capacity than the SE globulin, attributed to its higher PA and lower initial Ca concentrations.

The influence of biological products and growth regulators on the yield and quality indicators of pea seeds of various varieties

Peas are an important agricultural crop of great importance in human and animal nutrition. Peas, being a legume crop, help replenish nitrogen reserves in the soil. In field studies of the Federal State Budgetary Scientific Institution of the Federal Scientific Center of Legumes and Goat Crops (Oryol region), the influence of various growth regulators and biological products on the yield and quality indicators of pea seeds of the Nord and Multik varieties was studied. Pea plants are grown on dark gray forest, medium loamy soil of average cultivation. Before sowing, pea seeds were treated with solutions of Kornevin, Albit and Epin-extra by soaking for 5 hours. Solutions of the drugs were used at a concentration of 10-6 M, then dried and treated with Rizotorfin before sowing. Growth rates during the growing season and the yield of pea plants were determined. The content of protein, starch and amylose in starch was determined in the seeds. Research results have shown that the yield of pea plants depends on weather conditions. Under favorable weather conditions, the highest yield was obtained from the pea variety Nord (42.2 c/ha) in the variant with seed treatment with Kornevin, and in the Multik variety (43.0 c/ha) when treated with Rizotorfin. In arid conditions, the highest yield of peas of the Nord variety was obtained using the preparations Epin-extra and Kornevin. The highest yield of peas of the Multik variety was obtained using the preparations Rizotorfin, Kornevin and Epin-Extra. The research results, confirmed by statistical evaluation, showed that bioregulators and growth regulators help stimulate the amount of nitrogen supplied to plants, as well as the synthetic processes of protein synthesis. This contributed to improving the quality of seeds and green mass.

Novel palm shortening substitute using a combination of rapeseed oil, linseed meal and beta-glucan

This study investigated the potential of a novel sustainable ingredient composed of rapeseed oil, linseed meal and beta-glucan (PALM-ALT) to mimic palm shortening functionality in cake. The combined functional properties of linseed meal and beta-glucan led to stable semi-solid emulsion-gels (20-31 μm oil droplet size, 105-115 Pa.s viscosity and 60-65 Pa yield stress). PALM-ALT contained 25 and 88% less total and saturated fat than palm shortening, whilst PALM-ALT cakes contained 26 and 75% less total and saturated fat than the palm-based control. PALM-ALT cakes matched the flavour profile of the palm-based control, while rapeseed oil cakes tasted more sour and less sweet than the control (p < 0.05). PALM-ALT cakes proved less hard and more cohesive than the control (p < 0.05), with 100% of the consumer panel preferring PALM-ALT formulations. This study demonstrated the unique potential of PALM-ALT as healthier, sustainable and competitive alternative to palm shortening.

Techno-functional properties and allergenicity of mung bean (Vigna radiata) protein isolates from Imara and KPS2 varieties

Mung bean is an increasingly cultivated legume. This study compared mung bean varieties 'KPS2' from Thailand (Th) and 'Imara' from Tanzania (T) with a focus on protein composition, allergenicity, and techno-functional properties. Two rounds alkaline-acid extraction were performed to produce mung bean protein isolate (MBPI - Th1/T1 and Th2/T2), supernatant (S) and protein-poor residue (PPR). Mass spectrometric analysis revealed high abundance of 8 s-vicilin and 11 s-legumin in MBPI and S. Extraction removed considerable amounts of the seed albumin allergen but increased the relative abundance of cupins in MBPI. Higher vicilin levels were found in Th1 samples, contributed to increased protein solubility above pH 6.5. Th formed stronger gels which were more stable at higher frequencies. In contrast, T proteins were structurally more flexible, leading to its improved foaming ability. This study provides the knowledge and methods for appropriate selection of mung bean varieties for various food applications.

Colloidal and interfacial properties of spray dried pulse protein-blueberry polyphenol particles in model dispersion systems

The phytochemical composition and physicochemical attributes of polyphenol-enriched protein particle ingredients produced with pulse proteins (e.g. chickpea protein, pea protein, and a chickpea-pea protein blend) and polyphenols recovered from wild blueberry pomace were investigated for colloidal and interfacial properties. Anthocyanins were the major polyphenol fraction (27.74-36.47 mg C3G/g) of these polyphenol-rich particles (44.95-62.08 mg GAE/g). Dispersions of pea protein-polyphenol particles showed a superior phase stability before and after heat treatment compared to the chickpea pea protein-polyphenol system. This observation was independent of the added amount of NaCl in the dispersion. In general, at quasi equilibrium state, pulse protein-polyphenol particles and parental pulse protein ingredients showed similar oil-water interfacial tension. However, pea protein-polyphenol particles demonstrated a reduced diffusion-driven oil-water interfacial adsorption rate constant compared to the parental pea protein ingredient. Overall, the obtained results suggest application potential of pea protein-polyphenol particles as a functional food/beverage ingredient.

Extraction, Modification, Biofunctionality, and Food Applications of Chickpea (Cicer arietinum) Protein: An Up-to-Date Review

Plant-based proteins have gained popularity in the food industry as a good protein source. Among these, chickpea protein has gained significant attention in recent times due to its high yields, high nutritional content, and health benefits. With an abundance of essential amino acids, particularly lysine, and a highly digestible indispensable amino acid score of 76 (DIAAS), chickpea protein is considered a substitute for animal proteins. However, the application of chickpea protein in food products is limited due to its poor functional properties, such as solubility, water-holding capacity, and emulsifying and gelling properties. To overcome these limitations, various modification methods, including physical, biological, chemical, and a combination of these, have been applied to enhance the functional properties of chickpea protein and expand its applications in healthy food products. Therefore, this review aims to comprehensively examine recent advances in Cicer arietinum (chickpea) protein extraction techniques, characterizing its properties, exploring post-modification strategies, and assessing its diverse applications in the food industry. Moreover, we reviewed the nutritional benefits and sustainability implications, along with addressing regulatory considerations. This review intends to provide insights into maximizing the potential of Cicer arietinum protein in diverse applications while ensuring sustainability and compliance with regulations.

Protein from rapeseed for food applications: Extraction, sensory quality, functional and nutritional properties

The application of rapeseed protein in human foods is limited by residual antinutritive components and poor sensory quality. The effects of five extraction protocols on rapeseed protein yield, sensory, functional and nutritional properties were systematically evaluated in this study. In particular, the potential of weakly acidic salt (pH 6.5, 150 mmol·L-1 MgCl2) extraction as a mild method for recovering edible rapeseed protein was investigated compared with conventional alkali extraction. All salt-extracted proteins showed above 40 % extraction yield and low antinutritional factor contents. They also had ideal amino acid patterns and better in vitro gastroduodenal digestibility than alkaline-extracted proteins. Additionally, the lighter color and odor, as well as better solubility, emulsion activity, foaming property, and water/oil holding capacity were found in weakly acidic salt extraction-ultrafiltered proteins. These findings suggest that weakly acidic salt extraction-ultrafiltration could be used for obtaining edible rapeseed protein, while extraction yield should be improved for scale application.

Metabolomic insights into the effect of chickpea protein hydrolysate on the freeze-thaw tolerance of industrial yeasts

The use of frozen dough is an intensive food-processing practice that contributes to the development of chain operations in the bakery industry. However, the fermentation activity of yeasts in frozen dough can be severely damaged by freeze-thaw stress, thereby degrading the final bread quality. In this study, chickpea protein hydrolysate significantly improved the quality of steamed bread made from frozen dough while enhancing the yeast survival rate and maintaining yeast cell structural integrity under freeze-thaw stress. The mechanism underlying this protective role of chickpea protein hydrolysate was further investigated by untargeted metabolomics analysis, which suggested that chickpea protein hydrolysate altered the intracellular metabolites associated with central carbon metabolism, amino acid synthesis, and lipid metabolism to improve yeast cell freeze-thaw tolerance. Therefore, chickpea protein hydrolysate is a promising natural antifreeze component for yeast cryopreservation in the frozen dough industry.

Alcalase-Based Chickpea (Cicer arietinum L.) Protein Hydrolysates Efficiently Reduce Systolic Blood Pressure in Spontaneously Hypertensive Rats

Studies on antihypertensive chickpea protein hydrolysates have rarely performed in vivo evaluations, limiting the entry of such hydrolysates into functional food development and clinical trials. Thus, our aim was to optimize the hydrolysis conditions to produce an alcalase-based chickpea hydrolysate with a hypotensive effect in vivo at convenient oral doses. The hydrolysis reaction time, temperature, and alcalase/substrate concentration were optimized using a response surface analysis (RSA). ACE-I inhibition was the response variable. The optimized hydrolysis conditions were time = 0.5 h, temperature = 40 °C, and E/S concentration = 0.254 (U/g). The IC50 of the optimized hydrolysate (OCPH) was 0.358 mg/mL. Five hydrolysates from the RSA worksheet (one of them obtained after 5 min of hydrolysis (CPH15)) had an ACE-I inhibitory potential similar to that of OCPH (p > 0.05). At 50 mg/kg doses, OCPH and CPH15 promoted a clinically relevant hypotensive effect in spontaneously hypertensive rats, up to -47.35 mmHg and -28.95 mmHg, respectively (p < 0.05 vs. negative control). Furthermore, the hypotensive effect was sustained for at least 7 h post-supplementation. Overall, OCPH and CPH15 are promising ingredients for functional food development and as test materials for clinical trials.

Microencapsulation of ultrasound-assisted phenolic extracts of sugar maple leaves: Characterization, in vitro gastrointestinal digestion, and storage stability

Sugar maple leaves (SML), usually considered residue plant biomass and discarded accordingly, contain a considerable amount of phenolic antioxidants. In this study, SML phenolics were extracted employing both advanced (homogenization pretreated ultrasound-assisted extraction) and conventional (maceration) methods followed by their encapsulation by freeze drying and spray drying using a combination of maltodextrin and gum arabic as coating agents. Detailed physicochemical analyses revealed that the encapsulated microparticles had high solubility (>90 %) and encapsulation efficiency (>95 %), acceptable thermal stability with good handling properties. Phenolic compounds were completely released from microparticles during simulated gastric conditions. The microparticles influenced the bioaccessibility of more than 43 % of the phenolic fraction in the intestinal phase. The antioxidant capacity of the microparticles was preserved during storage. These findings suggest the effectiveness of the microencapsulation process for producing high quality microparticles of SML phenolic extracts and the possibility of their use in the food, nutraceutical, bio-pharmaceutical sectors.

Self-assembled pea vicilin nanoparticles as nanocarriers for improving the antioxidant activity, environmental stability and sustained-release property of curcumin

BACKGROUND

The application of curcumin (Cur) in the food industry is usually limited by its low water solubility and poor stability. This study aimed to fabricate self-assembled nanoparticles using pea vicilin (7S) through a pH-shifting method (pH 7-pH 12-pH 7) to develop water-soluble nanocarriers of Cur.

RESULTS

Intrinsic fluorescence, far-UV circular dichroism spectra and transmission electron microscopy analysis demonstrated that the structure of 7S could be unfolded at pH 12.0 and refolded when the pH shifted to 7.0. The assembled 7S-Cur exhibited a high loading ability of 81.63 μg mg-1 for Cur and homogeneous particle distribution. Cur was encapsulated in the 7S hydrophobic nucleus in an amorphous form and combined through hydrophobic interactions and hydrogen bonding, resulting in the static fluorescence quenching of 7S. Compared with free Cur, the retention rates of Cur in 7S-Cur were approximately 1.12 and 1.70 times higher under UV exposure at 365 nm or heating at 75 °C for 120 min, respectively, as well as 7S-Cur showing approximately 1.50 times higher antioxidant activity. During simulated gastrointestinal experiments, 7S-Cur exhibited a better sustained-release property than free Cur.

CONCLUSION

The self-assembled 7S nanocarriers prepared using a pH-shifting method effectively improved the antioxidant activity, environmental stability and sustained-release property of Cur. Therefore, 7S isolated from pea protein could be used as potential nanocarriers for Cur. © 2023 Society of Chemical Industry.

Plant protein solubility: A challenge or insurmountable obstacle

Currently, there is an increasing focus on comprehending the solubility of plant-based proteins, driven by the rising demand for animal-free food formulations. The solubility of proteins plays a crucial role in impacting other functional properties of proteins and food processing. Consequently, understanding protein solubility in a deeper sense may allow a better usage of plant proteins. Herein, we discussed the definition of protein solubility from both thermodynamic and colloidal perspectives. A range of factors affecting solubility of plant proteins are generalized, including intrinsic factors (amino acids composition, hydrophobicity), and extrinsic factors (pH, ionic strength, extraction and drying methods). Current methods to enhance solubility are outlined, including microwave, high intensity ultrasound, hydrostatic pressure, glycation, pH-shifting, enzymatic hydrolysis, enzymatic cross-linking, complexation and modulation of amino acids. We base the discussion on diverse modified methods of nitrogen solubility index available to determine and analyze protein solubility followed by addressing how other indigenous components affect the solubility of plant proteins. Some nonproteinaceous constituents in proteins such as carbohydrates and polyphenols may exert positive or negative impact on protein solubility. Appropriate protein extraction and modification methods that meet consumer and manufacturers requirements concerning nutritious and eco-friendly foods with lower cost should be investigated and further explored.

Pea protein extraction method impacts the protein (micro)structural organisation and in vitro digestion kinetics

There is increasing interest in including pulse proteins into food products due to their nutrient-rich and sustainable character. However, little is known regarding the consequences of different extraction approaches on the pulse protein structure and the subsequent protein (micro)structural organization and protein digestion kinetics. Therefore, three green pea protein extracts were created: (i) cooking followed by cotyledon cell isolation, (ii) alkaline extraction followed by isoelectric precipitation, or (iii) salt extraction, and compared to the original pea flour as well as to sodium caseinate. The results showed that encapsulated, denatured protein inside pea cotyledon cells presented the (s)lowest digestion, while accessible and more native protein (e.g., pea flour, pea protein salt extract) presented much faster and higher digestion. Moreover, the alkali extracted pea protein was denatured to some extent, significantly lowering in vitro digestion kinetics. In the second part, three different in vitro approaches were applied to digest the salt extracted pea protein. Semi-dynamic gastric digestion approaches simulate in vivo conditions more closely which especially impacted the rate of digestion.

Nonenzymatic glycation as a tunable technique to modify plant proteins: A comprehensive review on reaction process, mechanism, conjugate structure, and functionality

Plant proteins are expected to become a major protein source to replace currently used animal-derived proteins in the coming years. However, there are always challenges when using these proteins due to their low water solubility induced by the high molecular weight storage proteins. One approach to address this challenge is to modify proteins through Maillard glycation, which involves the reaction between proteins and carbohydrates. In this review, we discuss various chemical methods currently available for determining the indicators of the Maillard reaction in the early stage, including the graft degree of glycation and the available lysine or sugar, which are involved in the very beginning of the reaction. We also provide a detailed description of the most popular methods for determining graft sites and assessing different plant protein structures and functionalities upon non-enzymatic glycation. This review offers valuable insights for researchers and food scientists in order to develop plant-based protein ingredients with improved functionality.

Olive leaf protein: Extraction optimization, in vitro digestibility, structural and techno-functional properties

Olive leaf, as an important by-product of olive farming, is generated from the pruning and harvesting of olive trees and represents >10 % of the total olive weight. The present study was conducted to evaluate the composition, functional and structural characterizations, as well as the in vitro digestibility of olive leaf proteins isolated from ultrasonic-assisted extraction, comparing to classical and industrial techniques. The ultrasound-assisted extraction of olive leaf protein was optimized by the simultaneous maximization of the yield and purity of protein using a Box-Behnken design (BBD) of response surface methodology (RSM). The results indicated that the optimal extraction conditions were as follows: pH of 10.99, temperature of 40.48 °C, sonication time of 47.25 min, and solvent/solid ratio of 24.08 mL/g. Under these conditions, the extraction yield and protein content were 11.67 and 51.2 %, respectively, which were significantly higher than those obtained by the conventional techniques. Regarding the functionality of protein, extraction technique had significant impacts on the structural and functional properties of proteins. In general, ultrasound assisted extraction had higher solubility, and better foaming and thermal properties and in vitro digestibility but lower emulsifying stability and fluid binding capacity compared to conventional ones. Ultrasound-assisted alkaline extraction has great potential to produce edible olive leaf protein with modified functional properties that can be used for various aims in the food applications.

Effect of Starch on the Solubility of Quinoa Protein Isolates during Heat Treatment

There is increasing interest in developing quinoa products due to their unique nutritional value. Starch and protein are the primary components in quinoa, and the interaction between them affects the quality of quinoa products. This study extracted the starch and protein from quinoa and simulated the thermal processing of quinoa to investigate the effects of starch on the solubility and structure of quinoa protein isolates during heat treatment. The structure of quinoa protein isolates was characterized by fluorescence spectroscopy, Fourier transform infrared spectroscopy, laser particle size analysis, and scanning electron microscopy. The results showed that starch decreased protein solubility, and the maximum solubility was obtained after heating for 5 min. After starch addition during heat treatment, the surface charge distribution of protein changed, the degree of protein aggregation increased, the particle size of proteins increased, the thermal stability increased, and the β-sheet ratio of the proteins increased, suggesting that the protein structure is more ordered, which is the structural foundation of protein solubility decreasing. The research about the interaction between starch and protein and the effects on the solubility of protein could provide a reference for quinoa products processing.

Pulse Protein Isolates as Competitive Food Ingredients: Origin, Composition, Functionalities, and the State-of-the-Art Manufacturing

The ever-increasing world population and environmental stress are leading to surging demand for nutrient-rich food products with cleaner labeling and improved sustainability. Plant proteins, accordingly, are gaining enormous popularity compared with counterpart animal proteins in the food industry. While conventional plant protein sources, such as wheat and soy, cause concerns about their allergenicity, peas, beans, chickpeas, lentils, and other pulses are becoming important staples owing to their agronomic and nutritional benefits. However, the utilization of pulse proteins is still limited due to unclear pulse protein characteristics and the challenges of characterizing them from extensively diverse varieties within pulse crops. To address these challenges, the origins and compositions of pulse crops were first introduced, while an overarching description of pulse protein physiochemical properties, e.g., interfacial properties, aggregation behavior, solubility, etc., are presented. For further enhanced functionalities, appropriate modifications (including chemical, physical, and enzymatic treatment) are necessary. Among them, non-covalent complexation and enzymatic strategies are especially preferable during the value-added processing of clean-label pulse proteins for specific focus. This comprehensive review aims to provide an in-depth understanding of the interrelationships between the composition, structure, functional characteristics, and advanced modification strategies of pulse proteins, which is a pillar of high-performance pulse protein in future food manufacturing.

Deciphering the interaction mechanism and binding mode between chickpea protein isolate and flavonoids based on experimental studies and molecular simulation

Chickpea protein isolate (CPI) is a promising novel plant protein, and protein-flavonoid system has also been applied in various food products. However, the interaction mechanism between CPI and flavonoids remains to be elucidated. In this paper, the affinity behavior between flavonoids and CPI was explained by constructing the three-dimensional quantitative structure-activity relationship (R2 = 0.988, Q2 = 0.777). Subsequently, four representative flavonoids were selected for further study. Multi-spectroscopy analysis showed that the sequence of affinity for CPI was puerarin > apigenin > naringenin > epigallocatechin gallate. Meanwhile, flavonoids altered the secondary structure and spatial conformation of CPI, leading to the static quenching of CPI. Additionally, thermodynamic analysis indicated that hydrogen bonding and van der Waals forces were the main driving forces for complex binding. Molecular docking and molecular dynamics simulations further explored the binding sites and conformations of complexes. This study provides theoretical guidance for in-depth research on the interaction patterns between biomacromolecules and small molecules in food matrices.

Influence of atmospheric pressure plasma jet on the structural, functional and digestive properties of chickpea protein isolate

Chickpea protein (CPI) is a promising dietary protein and potential substitute for soy protein in food product development due to its high protein content and low allergenicity. However, CPI possesses denser tertiary and quaternary structures and contains certain amount of anti-nutritional factors, both of which constrain its functional properties and digestibility. The objective of this study was to assess the effectiveness of atmospheric pressure plasma jets (APPJ) as a non-thermal method for enhancing the functional characteristics and digestibility of CPI. In this study, the reactive oxygen and nitrogen species generated by the APPJ treatment led to protein oxidation and increased carbonyl and di-tyrosine contents. At the same time, the secondary, tertiary and microstructural structures of CPI were changed. The solubility, water holding capacity, fat absorption capacity, emulsifying capacity and foaming capacity of CPI were significantly improved after 30 s APPJ treatment, and a higher storage modulus in rheology was observed. Additionally, it was observed that the in vitro protein digestibility (IVPD) of APPJ-treated CPI increased significantly from 44.85 ± 0.6 % to 50.2 ± 0.59 % following in vitro simulated gastric and intestinal digestion, marking a noteworthy improvement of 11.93 %. These findings indicate that APPJ processing can enhance the functional and digestive properties of CPI through structural modification and expand its potential applications within the food industry.

Plant-based proteins: advanced extraction technologies, interactions, physicochemical and functional properties, food and related applications, and health benefits

Even though plant proteins are more plentiful and affordable than animal proteins in comparison, direct usage of plant-based proteins (PBPs) is still limited because PBPs are fed to animals as feed to produce animal-based proteins. Thus, this work has comprehensively reviewed the effects of various factors such as pH, temperature, pressure, and ionic strength on PBP properties, as well as describes the protein interactions, and extraction methods to know the optimal conditions for preparing PBP-based products with high functional properties and health benefits. According to the cited studies in the current work, the environmental factors, particularly pH and ionic strength significantly affected on physicochemical and functional properties of PBPs, especially solubility was 76.0% to 83.9% at pH = 2, while at pH = 5.0 reduced from 5.3% to 9.6%, emulsifying ability was the lowest at pH = 5.8 and the highest at pH 8.0, and foaming capacity was lowest at pH 5.0 and the highest at pH = 7.0. Electrostatic interactions are the main way for protein interactions, which can be used to create protein/polysaccharide complexes for food industrial purposes. The extraction yield of proteins can be reached up to 86-95% with high functional properties using sustainable and efficient routes, including enzymatic, ultrasound-, microwave-, pulsed electric field-, and high-pressure-assisted extraction. Nondairy alternative products, especially yogurt, 3D food printing and meat analogs, synthesis of nanoparticles, and bioplastics and packaging films are the best available PBPs-based products. Moreover, PBPs particularly those that contain pigments and their products showed good bioactivities, especially antioxidants, antidiabetic, and antimicrobial.

Yellow Field Pea Protein (Pisum sativum L.): Extraction Technologies, Functionalities, and Applications

Yellow field peas (Pisum sativum L.) hold significant value for producers, researchers, and ingredient manufacturers due to their wealthy composition of protein, starch, and micronutrients. The protein quality in peas is influenced by both intrinsic factors like amino acid composition and spatial conformations and extrinsic factors including growth and processing conditions. The existing literature substantiates that the structural modulation and optimization of functional, organoleptic, and nutritional attributes of pea proteins can be obtained through a combination of chemical, physical, and enzymatic approaches, resulting in superior protein ingredients. This review underscores recent methodologies in pea protein extraction aimed at enhancing yield and functionality for diverse food systems and also delineates existing research gaps related to mitigating off-flavor issues in pea proteins. A comprehensive examination of conventional dry and wet methods is provided, in conjunction with environmentally friendly approaches like ultrafiltration and enzyme-assisted techniques. Additionally, the innovative application of hydrodynamic cavitation technology in protein extraction is explored, focusing on its prospective role in flavor amelioration. This overview offers a nuanced understanding of the advancements in pea protein extraction methods, catering to the interests of varied stakeholders in the field.

Quantifying the effects of pre-roasting on structural and functional properties of yellow pea proteins

Roasting could modify the protein structure/conformation, contributing to changes in functional properties. Here we investigated the effects of pre-roasting on the extraction efficiency, structural and functional properties of pea protein concentrates and isolates (PPC and PPI) produced from yellow split peas. The shorter roasting times (150 °C, 10 and 20 min) had little effect on protein yields and could increase the solubility of PPC or PPI by ∼ 12% at pH 7 and enhance the solubility of PPI by ∼ 12% (10-min roasting) and ∼ 24% (20-min roasting) at pH 3. However, a longer duration of pre-roasting (150 °C, 30 min) significantly reduced the extraction efficiency of PPC and PPI by ∼ 30% and ∼ 61%, respectively. Meanwhile, pre-roasting had minor effects on SDS-PAGE profiles and the secondary structures of pea proteins but significantly altered tertiary structures by reducing free sulfhydryl groups, increasing disulfide bonds and surface hydrophobicity. As for the emulsifying properties, pre-roasting improved the emulsion ability index (EAI) of PPC and PPI but decreased the emulsion stability index (ESI) of PPC and had no significant effect on PPI. Moreover, PPC and PPI with shorter pre-roasting duration (10 and 20 min) had endothermic peaks and showed a slight decrease in the denaturation temperature (Td) and the onset temperature (To), respectively. Overall, the study demonstrated that controlled pre-roasting at 150 °C for 10 min and 20 min altered protein structures (mainly tertiary structures), improving the solubility and EAI of pea proteins at pH 7, while retaining their thermal properties in comparison to unroasted samples.

Chickpea protein hydrolysate as a novel plant-based cryoprotectant in frozen surimi: Insights into protein structure integrity and gelling behaviors

Chickpea protein (CP) and its enzymatic hydrolysates are one of the most widely consumed pulse ingredients manifesting versatile applications in food industry, such as binders, emulsifiers, and meat protein substitutes. Other than those well-known functionalities, however, the use of CP as a cryoprotectant remained unexplored. In this study, we prepared the chickpea protein hydrolysate (CPH) and investigated its cryoprotective effects to frozen surimi in terms of the protein structure integrity and gelling behaviors. Results indicated that CPH could inhibit myofibrillar protein (MP) denaturation and oxidation during the freeze-thaw cycling, as evidenced by their increased solubility, Ca²⁺-ATPase activity, sulfhydryl concentration, and declined content of disulfide bonds, carbonyl concentration and surface hydrophobicity. Freezing-induced changes on MP secondary structures were also retarded. Moreover, gels prepared from CPH-protected frozen surimi demonstrated more stabilized microstructure, uniform water distribution, enhanced elasticity, gel strength and water holding capacity. The CPH alone, at a reducing addition content of 4% (w/w), exhibited comparable cryoprotective performance to that of the commercial formulation (4% sucrose and 4% sorbitol). Therefore, this study provides scientific insights for development of pulse proteins as novel and high-performance food cryoprotectants.

Isolation and Characterization of Protein Fractions for Valorization of Sacha Inchi Oil Press-Cake

The growing interest in plant-based food protein sources has provided opportunities for the valorization of agri-food by-products, driving the food industry towards more sustainable development. In this study, three extraction procedures (varying the pH value (7.0 and 11.0) and the addition of salt (0 and 5%)) were investigated to obtain seven different protein fractions (SIPF) from Sacha Inchi oil press-cake (SIPC), which were characterized in terms of their protein content, electrophoretic profile, secondary structure, and techno-functional properties. Extractions at pH 11.0 without salt addition produced the highest values of protein content, extraction yield, protein recovery, and protein concentration increase (84.0%, 24.7%, 36.5%, and 1.5-fold, respectively). Under these extraction conditions, the electrophoretic analysis indicated that most of the SIPC proteins were extracted. SIPF displayed an excellent oil absorption capacity (4.3-9.0 w/w), and interesting foam activity (36.4-133.3%). The solubility and emulsifying activity of the albumin fractions were significantly higher than those of the other fractions (~87 vs. <15.8%, and 280-370 vs. <140 m²/g, respectively). Correlation analysis showed that the secondary structure of the SIPF significantly influences their techno-functional properties. These results indicate that SIPC is a by-product of great potential for protein extraction processes, and as a valorization strategy for technical cycle solutions for the Sacha Inchi productive chain in the circular economy context.

Unraveling the role of germination days on the aroma variations of roasted barley malts via gas chromatography-mass spectrometry based untargeted and targeted flavoromics

Roasting imparts malts with an increased amount of hedonic aromas. However, the relationship between the production of roasted malts and the generation of characteristic malt aromas remains unclear. In this study, roasted barley malts (RM) were prepared from three consecutive germination days (3, 4, 5D), and the aroma profiles among RM and base malt were holistically compared via HS-SPME-GC-MS/O-based flavoromics. Furthermore, the wort color, free amino acids, reducing sugars, and fatty acids compositions were determined before-and-after roasting. Results showed that roasting could flatten variations of precursors regardless of germination days. Additionally, based on quantitation of 53 aromas, a PLS-DA model was applied to differentiate all malts by 17 aromas with VIP ≥ 1. As for aroma harmony, RM with 4D-germination outstood due to a pleasant nutty note with the highest sweet-to-nutty index of 0.8. This work answers how germination days would impact the aroma of RM for the first time.

Ultrasound-assisted alkali removal of proteins from wastewater generated during oil bodies extraction

In this study, an ultrasonic-assisted alkaline method was used to remove proteins from wastewater generated during oil-body extraction, and the effects of different ultrasonic power settings (0, 150, 300, and 450 W) on protein recovery were investigated. The recoveries of the ultrasonically treated samples were higher than those of the samples without ultrasonic treatment, and the protein recoveries increased with increasing power, with a protein recovery of 50.10 % ± 0.19 % when the ultrasonic power was 450 W. Amino acid analysis showed that the amino acids comprising the recovered samples were consistent, regardless of the ultrasonic power used, but significant differences in the contents of amino acids were observed. No significant changes were observed in the protein electrophoretic profile using dodecyl polyacrylamide gel, indicating that sonication did not change the primary structures of the recovered samples. Fourier transform infrared and fluorescence spectroscopy revealed that the molecular structures of the samples changed after sonication, and the fluorescence intensity increased gradually with increasing sonication power. The contents of α-helices and random coils obtained at an ultrasonic power of 450 W decreased to 13.44 % and 14.31 %, respectively, whereas the β-sheet content generally increased. The denaturation temperatures of the proteins were determined using differential scanning calorimetry, and ultrasound treatment reduced the denaturation temperatures of the samples, which was associated with the structural and conformational changes caused by their chemical bonding. The solubility of the recovered protein increased with increasing ultrasound power, and a high solubility was essential in good emulsification. The emulsification of the samples was improved well. In conclusion, ultrasound treatment changed the structure and thus improved the functional properties of the protein.

Inducing the structural interplay of binary pulse protein complex to stimulate the solubilization of chickpea (Cicer arietinum L.) protein isolate

Chickpea protein (CP) is an exceptional nutrient-dense pulse protein prevailing in the development of plant-based foods. However, its relatively low solubility, compared to other legume proteins, hinders the practical uses of CP in food matrix. To resolve this problem, pea protein (PP), another popular pulse protein, was co-assembled with CP to form a binary complex during the alkaline pH-shifting process. Results indicated that the complexed CP exhibited significantly increased solubility to that of the pristine protein (more than 50%), whose aqueous stability was also enhanced against different environmental stresses (pH, salt, heat/frozen treatment, and centrifugation). Structural and morphology analysis confirmed the interplay between unfolded CP and PP during pH shifting, which enabled their resistance to acid-induced structural over-folding. Our experiments that induce the co-assembling of two pulse proteins provide a novel routine and scientific basis for tailoring CP functionalities, as well as the formulation of pulse protein-based products.

Generating Multi-Functional Pulse Ingredients for Processed Meat Products-Scientific Evaluation of Infrared-Treated Lentils

In the last decade, various foods have been reformulated with plant protein ingredients to enhance plant-based food intake in our diet. Pulses are in the forefront as protein-rich sources to aid in providing sufficient daily protein intake and may be used as binders to reduce meat protein in product formulations. Pulses are seen as clean-label ingredients that bring benefits to meat products beyond protein content. Pulse flours may need pre-treatments because their endogenous bioactive components may not always be beneficial to meat products. Infrared (IR) treatment is a highly energy-efficient and environmentally friendly method of heating foods, creating diversity in plant-based ingredient functionality. This review discusses using IR-heating technology to modify the properties of pulses and their usefulness in comminuted meat products, with a major emphasis on lentils. IR heating enhances liquid-binding and emulsifying properties, inactivates oxidative enzymes, reduces antinutritional factors, and protects antioxidative properties of pulses. Meat products benefit from IR-treated pulse ingredients, showing improvements in product yields, oxidative stability, and nutrient availability while maintaining desired texture. IR-treated lentil-based ingredients, in particular, also enhance the raw color stability of beef burgers. Therefore, developing pulse-enriched meat products will be a viable approach toward the sustainable production of meat products.

Salt Solubilization Coupled with Membrane Filtration-Impact on the Structure/Function of Chickpea Compared to Pea Protein

The demand for pulse proteins as alternatives to soy protein has been steeply increasing over the past decade. However, the relatively inferior functionality compared to soy protein is hindering the expanded use of pulse proteins, namely pea and chickpea protein, in various applications. Harsh extraction and processing conditions adversely impact the functional performance of pea and chickpea protein. Therefore, a mild protein extraction method involving salt extraction coupled with ultrafiltration (SE-UF) was evaluated for the production of chickpea protein isolate (ChPI). The produced ChPI was compared to pea protein isolate (PPI) produced following the same extraction method in terms of functionality and feasibility of scaling. Scaled-up (SU) ChPI and PPI were produced under industrially relevant settings and evaluated in comparison to commercial pea, soy, and chickpea protein ingredients. Controlled scaled-up production of the isolates resulted in mild changes in protein structural characteristics and comparable or improved functional properties. Partial denaturation, modest polymerization, and increased surface hydrophobicity were observed in SU ChPI and PPI compared to the benchtop counterparts. The unique structural characteristics of SU ChPI, including its ratio of surface hydrophobicity and charge, contributed to superior solubility at both a neutral and acidic pH compared to both commercial soy protein and pea protein isolates (cSPI and cPPI) and significantly outperformed cPPI in terms of gel strength. These findings demonstrated both the promising scalability of SE-UF and the potential of ChPI as a functional plant protein ingredient.

Isoelectric point isolation and characterization of proteins from lupine cultivars as influenced by chemical and thermal treatments

Pulses provide a significant nutritional potential for the large proportion of the population in developing countries. Lupine is among the underutilized legume crops for human food in Ethiopia and globally concomitant to its contents of bitter alkaloids. This research was initiated to investigate the effects of soaking lupine seeds of bitter and sweet varieties in water and 2% sodium carbonate (Na₂CO₃) solutions as grain softener on the protein extraction efficiency and its sensory acceptability. It was hypothesized that the soaking treatment results in the removal of characteristic bitterness when coupled with thermal treatment (roasting). The result showed that soaking in Na₂CO₃ significantly increased the protein extraction efficiency (both protein yield and quality (purity)) in the two lupine cultivars. The roasting treatment did not help much. The bitter variety of lupine soaked in Na₂CO₃ with no roasting treatment gave the highest protein yield (39.45%), while the sweet variety soaked in water followed by roasting exhibited the least protein yield (23.25%). The purity of the protein isolates from the lupine samples soaked in 2% Na₂CO₃ followed by roasting was the highest (92.29%). The non-soaked samples of the sweet variety after roasting resulted in the lowest purity (75.05%). The water holding, and oil absorption capacity, as well as the emulsification activity and foaming capacity of the protein isolates were significantly varied for the lupine varieties, and by the soaking and roasting treatments. Higher (314.38%) WHC was recorded for the protein isolates from sweet variety soaked in Na₂CO₃, where the bitter variety, when soaked in 2% Na₂CO₃ without roasting gave protein isolates of higher emulsion and foaming capacities. The research revealed also that soaking of lupine seeds in grain softeners shows a great potential as a pretreatment for enhanced protein extraction and functional desirability (in terms of emulsion and foaming capacities) as well as sensory acceptability and can be recommended for scaling up at industrial level.

Emerging plant proteins as nanocarriers of bioactive compounds

The high prevalence of chronic illnesses, including cancer, diabetes, obesity, and cardiovascular diseases has become a growing concern for modern society. Recently, various bioactive compounds (bioactives) are shown to have a diversity of health-beneficial impacts on a wide range of disorders. But the application of these bioactives in food and pharmaceutical formulations is limited due to their poor water solubility and low bioaccessibility/bioavailability. Plant proteins are green alternatives for designing biopolymeric nanoparticles as appropriate nanocarriers thanks to their amphiphilic nature compatible with many bioactives and unique functional properties. Recently, emerging plant proteins (EPPs) are employed as nanocarriers for protection and targeted delivery of bioactives and also improving their stability and shelf-life. EPPs could enhance the solubility, stability, and bioavailability of bioactives by different types of delivery systems. In addition, the use of EPPs in combination with other biopolymers like polysaccharides was found to make a favorable wall material for food bioactives. This review article covers the various sources and importance of EPPs along with different encapsulation techniques of bioactives. Characterization of EPPs for encapsulation is also investigated. Furthermore, the focus is on the application of EPPs as nanocarriers for food bioactives.

Composition and functional properties of hemp seed protein isolates from various hemp cultivars

Hemp seed protein isolates (HPI) were extracted from seven commercial hemp cultivars, a Cornell breeding line, and a commercial hemp heart product, and their composition and functional properties were investigated. HPI contained different ratios of edestin, vicilin, and albumin proteins, which affected protein solubility and functionality. Higher protein solubility was associated with cultivars that contained more vicilin and albumin, which influenced the subsequent functional properties of HPI. Significant differences in water holding capacity (0.83-1.05 g water/g protein isolate), oil holding capacity (1.28-1.81 g oil/g protein isolate), foam capacity (52.9%-84.9%), and foam stability (68.1%-89.4%) were observed across HPI. The Cornell hemp breeding line exhibited the highest protein solubility at pH 7.0 and was uniquely capable of forming an emulsion. The relationship identified between hemp seed protein composition and functionality, in conjunction with the demonstration of an on-going hemp breeding line, suggest that continued, targeted development of hemp cultivars can improve its seed protein functional properties for ingredient utilization in plant-based foods.

Alternations in the multilevel structures of chickpea protein during fermentation and their relationship with digestibility

This study investigated the effects of fermentation on in vitro protein digestibility of chickpeas and their relationship with the variations of multilevel structures of chickpea protein. The results showed that lactobacillus fermentation not only increased the solubility of chickpea protein but also enhanced the hydrolysis of protein during gastric and intestinal digestion by altering the multilevel structures of chickpea protein. The degree of hydrolysis, free amino acid content, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) revealed that macromolecule chickpea protein was hydrolyzed during fermentation. Raman and UV spectroscopy scans indicated that the α-helix content increased while the content of β-sheet in chickpea protein dropped significantly after fermentation. As for fermented chickpea protein, the aromatic acid residues were gradually more exposed than the unfermented chickpea protein, and the intramolecular disulfide bond was generally converted to the intermolecular form. Our findings showed that fermentation changed the multilevel structures of chickpea protein, degrading spherical structures into looser states that were more responsible for their effective hydrolysis during digestion. Furthermore, better digestibility of chickpea protein would stimulate the use of chickpea fermentation in food products.

Structural modification of plum (Prunus domestica L) kernel protein isolate by supercritical carbon-dioxide treatment: Functional properties and in-vitro protein digestibility

The effect of supercritical carbon dioxide (SC-CO₂) treatment at different processing temperatures (30-70 °C) on the physico-functional properties, structural features, and in-vitro digestibility (IVPD) of plum kernel protein isolates (PKPI) was examined. The results revealed remarkable changes in the secondary structures of SC-CO₂-treated PKPIs, including a decrease in α-helix proportion, a concomitant increase in β-sheet content, and a considerable variation in random coils and β-turn structures. The temperature rise increased the negative zeta potential to a maximum of 31.35 mV at 60 °C, exhibiting the colloidal stability of PKPI dispersions. SDS-PAGE analysis showed variations in the intensities of protein bands, indicating denaturation and aggregation at higher temperatures. These structural and molecular changes improved water-binding capacity (1.22-fold) and oil binding capacity (1.11-fold), wettability (1.12-fold), and the highest value in all the properties was recorded at 60 °C. Moreover, the highest IVPD value (21.58 %) and a distinguishable colour difference (∆E) of 8.11 was also obtained at 60 °C of the processing temperature. Therefore, SC-CO₂ treatment-induced modification of PKPI contributed to the enhanced digestibility and techno-functional properties, which offered new prospects to extend its use in food applications.

High pressure homogenization to boost the technological functionality of native pea proteins

Pea proteins are being increasingly used for the formulation of plant-based products, but their globular structure and the presence of aggregates can affect their technological properties. In this study, the effect of high pressure homogenization (HPH) at different intensities (60 and 100 MPa) was investigated as a pre-treatment to modulate the techno-functional properties of a pea protein isolate (IP) extracted through an alkaline extraction/isoelectric precipitation process. SDS-PAGE, circular dichroism, thermal properties, total free sulfhydryl groups, antioxidant capacity and reducing properties were evaluated along with technological indices as solubility, WHC and OHC, interfacial tension and emulsifying capacity. HPH treatments were able to unfold and modify proteins structure, leading also to a change of the relative abundance of pea protein globulins (SDS-PAGE) and of the vicilin to legumin ratio. Solubility, WHC and OHC were improved, while interfacial tension and emulsifying capacity were weakly affected. However, an enhanced physical stability over time of the emulsions prepared with the 60 MPa-treated protein was found, likely as an effect of the decreased ratio between vicilin and legumin after treatment. Results of this study will contribute to deepen the effect of the HPH technology used as pre-treatment, adding useful results and expanding knowledge about the structure and techno-functional properties of native and modified pea proteins.

Investigating the Effect of Supercritical Carbon Dioxide Treatment on the Rheological, Thermal, and Functional Properties of Plum (Prunus domestica L.) Kernel Protein Isolates

Plum kernels are a promising source of dietary proteins that are irretrievably lost during processing. The recovery of these underexploited proteins could be eminently vital for human nutrition. Plum kernel protein isolate (PKPI) was prepared and exposed to a targeted supercritical carbon dioxide (SC-CO₂) treatment to diversify its effectiveness in industrial applications. The impacts of SC-CO₂ treatment at different processing temperatures (30-70 °C) on dynamic rheology, microstructure, thermal, and techno-functional characteristics of PKPI were investigated. The results revealed that the dynamic viscoelastic characteristics of SC-CO₂-treated PKPIs showed higher storage modulus, loss modulus, and lower tan δ value than native PKPI, indicating greater strength and elasticity of the gels. Microstructural analysis showed that the proteins experienced denaturation at elevated temperatures and resulted in the formation of soluble aggregates, which increased the heat requirement for thermal denaturation of SC-CO₂-treated samples. SC-CO₂-treated PKPIs demonstrated a decline of 20.74% and 30.5% in crystallite size and crystallinity. PKPIs treated at 60 °C showed the highest dispersibility, which was 1.15-fold higher than the native PKPI sample. SC-CO₂ treatment offers a novel path to improve the techno-functional properties of PKPIs and extend its use in food and non-food applications.

Physicochemical, structural, functional and flavor adsorption properties of white shrimp (Penaeus vannamei) proteins as affected by processing methods

Proteins contribute to the flavor release and texture of foods besides their nutritional attributes. However, processing affects the protein structural conformation and, thus, their functional properties. White shrimp proteins (WSP) are well known for their nutritional and functional properties and limited attention has been paid to the flavor adsorption properties of WSP. This study investigated the effects of processing methods such as microwave drying, hot air drying, roasting, and boiling on the structural (secondary and tertiary) changes and physicochemical, functional, and flavor adsorption properties of white shrimp proteins (WSP). Structural changes of WSPs were evaluated by Fourier Transform Infrared (FTIR) spectroscopy, fluorescence spectroscopy, and sulfhydryl bond content. Results revealed that the processing triggered structural changes that affected the functional properties of WSP. The highest surface hydrophobicity (H₀) of WSP in boiling (58.27 ± 1.68) and microwave drying (39.83 ± 0.83) caused increased emulsifying properties and decreased water solubility. The increased content of α-helix and random coils leads to cross-linking and protein aggregation in hot air drying (21.62 ± 0.37 %) and roasting (24.30 ± 0.24 %), which leads to low H₀ and high foaming properties. Processing has increased the flavor adsorption ability of WSP. Among all the processing methods, boiling has shown the highest flavor adsorption potential, followed by microwave drying. The findings broaden the scope of techno-functional properties of WSP in the food industry by thermal treatment modification.

Structural and Physicochemical Characterization of Extracted Proteins Fractions from Chickpea (Cicer arietinum L.) as a Potential Food Ingredient to Replace Ovalbumin in Foams and Emulsions

Chickpeas are the third most abundant legume crop worldwide, having a high protein content (14.9-24.6%) with interesting technological properties, thus representing a sustainable alternative to animal proteins. In this study, the surface and structural properties of total (TE) and sequential (ALB, GLO, and GLU) protein fractions isolated from defatted chickpea flour were evaluated and compared with an animal protein, ovalbumin (OVO). Differences in their physicochemical properties were evidenced when comparing TE with ALB, GLO, and GLU fractions. In addition, using a simple and low-cost extraction method it was obtained a high protein yield (82 ± 4%) with a significant content of essential and hydrophobic amino acids. Chickpea proteins presented improved interfacial and surface behavior compared to OVO, where GLO showed the most significant effects, correlated with its secondary structure and associated with its flexibility and higher surface hydrophobicity. Therefore, chickpea proteins have improved surface properties compared to OVO, evidencing their potential use as foam and/or emulsion stabilizers in food formulations for the replacement of animal proteins.

Extraction Optimization, Functional and Thermal Properties of Protein from Cherimoya Seed as an Unexploited By-Product

Plant-based proteins are gaining in attraction compared with animal-based proteins due to their superior ethical profiles, growing concerns on the part of various organizations about animal health and welfare, and increased global greenhouse-gas emissions in meat production. In this study, the response surface methodology (RSM) using a Box-Behnken design (BBD) was applied to optimize the ultrasound-assisted alkaline extraction of cherimoya-seed proteins as valuable by-products. The effects of three pH, temperature, and time factors on the protein-extraction yield and protein content were investigated. The pH at 10.5 and temperature of 41.8 °C for 26.1 min were considered the optimal ultrasound-assisted alkaline-extraction conditions since they provided the maximum extraction yield (17.3%) and protein content (65.6%). An established extraction technique was employed to enhance the cherimoya-seed protein yield, purity, and functional properties. A thermogravimetric analysis (TGA) of the samples showed that the ultrasound-assisted alkaline extraction improved the thermal stability of the protein concentrate.

Development and Chemical-Sensory Characterization of Chickpeas-Based Beverages Fermented with Selected Starters

Legume protein ingredients are receiving continuous interest for their potential to formulate plant-based dairy analogs. In this study, a legume-based slurry was produced from an Apulian black chickpeas (BCP) protein concentrate and fermented with three starter cultures, Streptococcus thermophilus (ST), a co-culture of ST with Lactococcus lactis (STLL) and a co-culture of ST with Lactobacillus plantarum (STLP). The effect of fermentation on the biochemical, texture and sensorial parameters was evaluated. The same beverage without inoculum was used as a control (CTRL). All the obtained fermented beverages were characterized by high protein (120.00 g kg−1) and low-fat contents (17.12 g kg−1). Fermentation contributed to a decrease in the contents of phytic acid by 10 to 79% and saturated fatty acids by 30 to 43%, with the STLP fermentation exercising the major effect. The three culture starters influenced the texture and sensorial attributes and the profile of the volatile compounds differently. Fermentation increased the lightness, consistency, cohesivity and viscosity of the formulated beverages. On a sensorial level, STLL had a major effect on the acidity, sourness and astringency, while both ST and STLP affected the creaminess, solubility and stickiness. Legumes and grass aromas were masked in LAB-fermented samples, probably due to a new VOC formation. The functional properties of LAB fermentation, along with the high protein content of the black chickpeas concentrate, provide the opportunity to formulate a clean label and safe plant-based fermented beverage with higher nutritional value compared to the others currently found in the market.

Structural, and functional properties of phosphorylated pea protein isolate by simplified co-spray drying process

In this work, to improve the functionality of pea protein isolate (PPI), sodium hexametaphosphate (SHMP) was added during last step of protein extraction and co-spray dried. The influence of PPI to SHMP mixing ratios (95:5 and 90:10) and reaction pH conditions (pH 6, 7, 8, and 9) on reaction efficiency, structural and functional properties of phosphorylated PPI were evaluated. Results showed that both mixing ratios had a similar degree of phosphorylation, suggesting the high efficiency of a 95:5 mixing ratio. The mixing ratio affected powder yield and proximate composition whereas hydrophobicity and denaturation temperature were regulated by pH conditions. For functionality, both mixing ratios showed significantly increased solubility at pH 6. Moreover, an increase in foaming capacity was observed in all phosphorylated PPI. The result from the current study may work as a basis for PPI phosphorylation in the food industry using the simplified method.

Nutritional Value and Physicochemical Characteristics of Alternative Protein for Meat and Dairy-A Review

In order to alleviate the pressure on environmental resources faced by meat and dairy production and to satisfy the increasing demands of consumers for food safety and health, alternative proteins have drawn considerable attention in the food industry. However, despite the successive reports of alternative protein food, the processing and application foundation of alternative proteins for meat and dairy is still weak. This paper summarizes the nutritional composition and physicochemical characteristics of meat and dairy alternative proteins from four sources: plant proteins, fungal proteins, algal proteins and insect proteins. The difference between these alternative proteins to animal proteins, the effects of their structural features and environmental conditions on their properties, as well as the corresponding mechanism are compared and discussed. Though fungal proteins, algal proteins and insect proteins have shown some advantages over traditional plant proteins, such as the comparable protein content of insect proteins to meat, the better digestibility of fungal proteins and the better foaming properties of algal proteins, there is still a big gap between alternative proteins and meat and dairy proteins. In addition to needing to provide amino acid composition and digestibility similar to animal proteins, alternative proteins also face challenges such as maintaining good solubility and emulsion properties. Their nutritional and physicochemical properties still need thorough investigation, and for commercial application, it is important to develop and optimize industrial technology in alternative protein separation and modification.

Modeling the Thermal Denaturation of the Protein-Water System in Pulses (Lentils, Beans, and Chickpeas)

Thermal treatment applied during the cooking of pulses leads to denaturation and even aggregation of the proteins, which may impact protein digestibility. Thermal transitions of lentil, chickpea, and bean proteins were studied using differential scanning calorimetry (DSC). Protein-enriched samples were obtained by dry air classification of dehulled seeds and were heated to 160 °C, with water contents ranging from 0.2 to 4 kg/kg on a dry basis. The DSC peaks of the resulting endotherms were successfully modeled as overlapping Gaussian functions. The denaturation temperatures were modeled as a function of the temperature according to the Flory-Huggins theory. The modeling allows for the calculation of the degree of protein transition for any temperature and moisture condition. The denaturation diagrams reflect the different protein compositions of lentil, chickpea, and bean (particularly the 11S/7S globulin ratio). Chickpea proteins were more thermally stable than those from lentil and bean. Proteins underwent an irreversible transition, suggesting that unfolding and aggregation were coupled.

A Critical review focusing the effect of ingredients on the textural properties of plant-based meat products

Plant-based meat alternatives have been studied for decades, but have recently gained more attraction in the food industries and research communities. Concern about animal welfare, health, environment and moral beliefs acts as a driving force for the growth of plant-based meat products. The most challenging task in the development of meat analog is to imitate the texture of conventional meat products. The fabrication of plant-based meat product requires a wise selection and formulation of ingredients to perfectly mimic the fibrous structure of meat. Top-down and bottom-up approaches are the two most commonly used structuring techniques for the preparation of plant-based meat products. Development of comminuted meat product is easy as compared to the whole-muscle type plant-based meat products. Several plant-based ingredients such as texturized and non-texturized proteins, fats, binding agents, flavoring and coloring agents accompanied with different processing techniques (extrusion, shear cell, wet spinning, electrospinning, and freeze structuring) are used in the preparation of meat analogs. This paper aims to discuss the impact of ingredients on the textural properties of plant-based meat products.