Synthesis and characterization of antibacterial carboxymethyl cellulose/ZnO nanocomposite hydrogels

Natural biopolymers in the fabrication and coating of ureteral stent: An overview

Ureteral stents are indwelling medical devices that are most commonly used in treating different urinary tract complications like ureteral obstruction, kidney stones, and strictures, and allow normal urine flow from the kidney to the bladder. Tremendous work has been done in ureteral stent technology to meet the clinical demands, however, till-date a gold standard material for ureteral stents has not yet been developed. Many materials such as metal, and synthetic polymers have been published, however, the role of natural biopolymers has not yet been summarized and discussed. There is no detailed review published to explain the role of natural biopolymers in ureteral stent technology. This is the first review that explains and summarizes the role of natural polymer in ureter stent technology. In this review alginate and chitosan polymers are discussed in detail in the fabrications and coating of ureteral stents. It was summarized that alginate polymer alone or in combination with other polymers have been successfully used by many researchers for the manufacturing of ureteral stents with satisfactory results in vitro, in vivo, and clinical trials. However, alginate is rarely used to coat the surface of ureteral stent. On the other hand, only two reports are available on chitosan polymers for the manufacturing of ureteral stents, however, chitosan is largely used to coat the existing ureteral stents owing to their good antibacterial characteristics. Coating procedures can inhibit encrustation and biofilm formation. Nevertheless, the lack of antibacterial efficiency and inadequate coating limit their applications, however, natural biopolymers like chitosan showed significant promises in coating. Overall, the renewable nature, abundant, biocompatible, and biodegradable potential of natural polymer can be established with significant aspects as the ideal ureteral stent. To fully utilize the potential of the natural biopolymers in the ureteral stent design or coatings, an in-depth study is required to understand and identify their performance both in vitro and in vivo in the urinary tract.

Fabrication of Zinc(II) Mediated Poly(Acrylamide Co Acrylic Acid) Hydrogel with Thixotropic and Tribological Properties

Hydrogels have emerged as promising candidates for biomedical applications, such as replacing natural articular cartilage, owing to their unique viscoelastic properties. However, sufficient mechanical properties, self-healing ability, and adhesive nature are some issues limiting its application window. Here, a facile one-pot synthesis of dual cross-linked zinc-coordinated copolymer hydrogels is presented. The network structure of the copolymer hydrogels is strategically developed via dynamic and reversible physical cross-linking by Zn2+ ions and simultaneous covalent cross-linking through a covalent cross-linker viz methylene bisacrylamide. Fourier-transform infrared (FTIR), X-ray diffraction (XRD) scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analysis have thoroughly characterized the structure of the synthesized hydrogels. The introduction of Zn2+ offers dynamic and reversible complexation, leading to excellent mechanical properties and self-healing features. Moreover, the percentage of the equilibrium water content of zinc-coordinated copolymer hydrogel samples is comparable with that of natural articular cartilage. The Shear sliding study shows the dominant adhesive behavior of HGel-Zn(NO3)2 sample compared to the parent HGel sample. This facile dual cross-linked hydrogel, HGel-Zn(NO3)2, with a combination of good mechanical properties, efficient self-recovery, adequate water content, and favorable adhesive nature, seems very promising to mimic the articular cartilage.

Antibacterial Nanoplatelets via Crystallization-Driven Self-Assembly of Poly(l-lactide)-Based Block Copolymers

Membrane-active antimicrobial materials are promising substances to fight antimicrobial resistance. Herein, crystallization-driven self-assembly (CDSA) is employed for the preparation of nanoparticles with different morphologies, and their bioactivity is explored. Block copolymers (BCPs) featuring a crystallizable and antimicrobial block were synthesized using a combination of ring-opening and photoiniferter RAFT polymerizations. Subsequently formed nanostructures formed by CDSA could not be deprotected without degradation of the structures. CDSA of deprotected BCPs yielded 2D diamond-shaped nanoplatelets in MeOH, while spherical nanostructures were observed for assembly in water. Platelets exhibited improved antibacterial capabilities against two Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) compared to their spherical counterparts. The absence of hemolytic activity leads to the excellent selectivity of platelets. A mechanism based on membrane permeabilization was confirmed via dye-leakage assays. This study emphasized the impact of the shape of nanostructures on their interaction with bacterial cells and how a controlled assembly can improve bioactivity.

Design and synthesis of drug hydrogels containing carboxymethylcellulose with honeycomb structure and pH-sensitivity as drug delivery systems for adriamycin, metformin, and naproxen

The aim of this research is to prepare and identify functionalized carboxymethylcellulose/mesoporous silica nanohydrogels (CMC/NH2-MCM-41) for obtaining a pH-sensitive system for the controlled release of drugs. The beads of CMC/NH2-MCM-41 nanocomposites were prepared by dispersing NH2-MCM-41 in a CMC polymer matrix and crosslinking with ferric ions (Fe3+). The SEM analysis of samples revealed enhancement in surface porosity of the functionalized nanohydrogel beads compared to the conventional beads. Swelling of the prepared functionalized nanohydrogels was evaluated at various pH values including pH = 7.35-7.45 (simulated body fluid or healthy cells), pH = 6 (simulated intestinal fluid), and pH = 1.5-3.5 (simulated gastric fluid). The swelling of CMC/MCM-41 and CMC/NH2-MCM-41 nanohydrogels at the pH values of simulated body fluid and simulated intestinal fluid is much higher than that of simulated gastric fluid, indicating successful synthesis of pH-sensitive nanohydrogels for drug delivery. The drug loading results showed that drug release in the CMC/NH2-MCM-41 system is much slower than that in the CMC/MCM-41 system. The results of the survival studies for the manufactured systems showed a very good biocompatibility of the designed drug delivery systems for biological applications. By coating the surface of functionalized mesopores with CMC hydrogel, we were able to develop a pH-sensitive intelligent drug delivery system.

Exploring the Progress of Hyaluronic Acid Hydrogels: Synthesis, Characteristics, and Wide-Ranging Applications

This comprehensive review delves into the world of hyaluronic acid (HA) hydrogels, exploring their creation, characteristics, research methodologies, and uses. HA hydrogels stand out among natural polysaccharides due to their distinct features. Their exceptional biocompatibility makes them a top choice for diverse biomedical purposes, with a great ability to coexist harmoniously with living cells and tissues. Furthermore, their biodegradability permits their gradual breakdown by bodily enzymes, enabling the creation of temporary frameworks for tissue engineering endeavors. Additionally, since HA is a vital component of the extracellular matrix (ECM) in numerous tissues, HA hydrogels can replicate the ECM's structure and functions. This mimicry is pivotal in tissue engineering applications by providing an ideal setting for cellular growth and maturation. Various cross-linking techniques like chemical, physical, enzymatic, and hybrid methods impact the mechanical strength, swelling capacity, and degradation speed of the hydrogels. Assessment tools such as rheological analysis, electron microscopy, spectroscopy, swelling tests, and degradation studies are employed to examine their attributes. HA-based hydrogels feature prominently in tissue engineering, drug distribution, wound recovery, ophthalmology, and cartilage mending. Crafting HA hydrogels enables the production of biomaterials with sought-after qualities, offering avenues for advancements in the realm of biomedicine.

Nanoparticles incorporated hydrogels for delivery of antimicrobial agents: developments and trends

The prevention and treatment of microbial infections is an imminent global public health concern due to the poor antimicrobial performance of the existing antimicrobial regime and rapidly emerging antibiotic resistance in pathogenic microbes. In order to overcome these problems and effectively control bacterial infections, various new treatment modalities have been identified. To attempt this, various micro- and macro-molecular antimicrobial agents that function by microbial membrane disruption have been developed with improved antimicrobial activity and lesser resistance. Antimicrobial nanoparticle-hydrogels systems comprising antimicrobial agents (antibiotics, biological extracts, and antimicrobial peptides) loaded nanoparticles or antimicrobial nanoparticles (metal or metal oxide) constitute an important class of biomaterials for the prevention and treatment of infections. Hydrogels that incorporate nanoparticles can offer an effective strategy for delivering antimicrobial agents (or nanoparticles) in a controlled, sustained, and targeted manner. In this review, we have described an overview of recent advancements in nanoparticle-hydrogel hybrid systems for antimicrobial agent delivery. Firstly, we have provided an overview of the nanoparticle hydrogel system and discussed various advantages of these systems in biomedical and pharmaceutical applications. Thereafter, different hybrid hydrogel systems encapsulating antibacterial metal/metal oxide nanoparticles, polymeric nanoparticles, antibiotics, biological extracts, and antimicrobial peptides for controlling infections have been reviewed in detail. Finally, the challenges and future prospects of nanoparticle-hydrogel systems have been discussed.

Ibuprofen-Loaded Silver Nanoparticle-Doped PVA Gels: Green Synthesis, In Vitro Cytotoxicity, and Antibacterial Analyses

In contrast to conventional drug delivery systems, controlled drug release systems employ distinct methodologies. These systems facilitate the release of active substances in predetermined quantities and for specified durations. Polymer hydrogels have gained prominence in controlled drug delivery because of their unique swelling-shrinkage behavior and ability to regulate drug release. In this investigation, films with a hydrogel structure were crafted using polyvinyl alcohol, a biocompatible polymer, and silver nanoparticles. Following characterization, ibuprofen was loaded into the hydrogels to evaluate their drug release capacity. The particle sizes of silver nanoparticles synthesized using a green approach were determined. This study comprehensively examined the structural properties, morphological features, mechanical strength, and cumulative release patterns of the prepared films. In vitro cytotoxicity analysis was employed to assess the cell viability of drug-loaded hydrogel films, and their antibacterial effects were examined. The results indicated that hydrogel films containing 5% and 10% polyvinyl alcohol released 89% and 97% of the loaded drug, respectively, by day 14. The release kinetics fits the Korsmeyer-Peppas model. This study, which describes nanoparticle-enhanced polyvinyl alcohol hydrogel systems prepared through a cost-effective and environmentally friendly approach, is anticipated to contribute to the existing literature and serve as a foundational study for future research.

The Recent Progress of the Cellulose-Based Antibacterial Hydrogel

Cellulose-based antibacterial hydrogel has good biocompatibility, antibacterial performance, biodegradability, and other characteristics. It can be very compatible with human tissues and degradation, while its good water absorption and moisturizing properties can effectively absorb wound exudates, keep the wound moist, and promote wound healing. In this paper, the structural properties, and physical and chemical cross-linking preparation methods of cellulose-based antibacterial hydrogels were discussed in detail, and the application of cellulose-based hydrogels in the antibacterial field was deeply studied. In general, cellulose-based antibacterial hydrogels, as a new type of biomaterial, have shown good potential in antimicrobial properties and have been widely used. However, there are still some challenges, such as optimizing the preparation process and performance parameters, improving the antibacterial and physical properties, broadening the application range, and evaluating safety. However, with the deepening of research and technological progress, it is believed that cellulose-based antibacterial hydrogels will be applied and developed in more fields in the future.

Jute Stick-Derived Cellulose-Based Hydrogel: Synthesis, Characterization, and Methylene Blue Removal from Aqueous Solution

In this work, microcrystalline cellulose (MCC) was isolated from jute sticks and sodium carboxymethyl cellulose (Na-CMC) was synthesized from the isolated MCC. Na-CMC is an anionic derivative of microcrystalline cellulose. The microcrystalline cellulose-based hydrogel (MCCH) and Na-CMC-based hydrogel (Na-CMCH) were prepared by using epichlorohydrin (ECH) as a crosslinker by a chemical crosslinking method. The isolated MCC, synthesized Na-CMC, and corresponding hydrogels were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electronic microscopy (SEM), and energy dispersive spectroscopy (EDS) for functional groups, crystallinity, surface morphology, and composite elemental composition, respectively. Pseudo-first-order, pseudo-second-order, and Elovich models were used to investigate the adsorption kinetics. The pseudo-second-order one is favorable for both hydrogels. Freundlich, Langmuir, and Temkin adsorption isotherm models were investigated. MCCH follows the Freundlich model (R2 = 0.9967), and Na-CMCH follows the Langmuir isotherm model (R2 = 0.9974). The methylene blue (MB) dye adsorption capacities of ionic (Na-CMCH) and nonionic (MCCH) hydrogels in different contact times (up to 600 min), initial concentrations (10-50 ppm), and temperatures (298-318 K) were investigated and compared. The maximum adsorption capacity of MCCH and Na-CMCH was 23.73 and 196.46 mg/g, respectively, and the removal efficiency of MB was determined to be 26.93% for MCCH and 58.73% for Na-CMCH. The Na-CMCH efficiently removed the MB from aqueous solutions as well as spiked industrial wastewater. The Na-CMCH also remarkably efficiently reduced priority metal ions from an industrial effluent. An effort has been made to utilize inexpensive, readily available, and environmentally friendly waste materials (jute sticks) to synthesize valuable adsorbent materials.

Carboxymethyl cellulose gels immobilized Ag/AgCl-ZnO nanoparticles for improving sunlight-catalyzed antibacterial performance

Antibacterial sodium carboxymethyl cellulose (CMC) gels were prepared via immobilizing ZnO and/or Ag/AgCl in situ to inhibit the aggregation of nano-photocatalyst. Epichlorohydrin was used as a crosslinking agent to prepare CMC gel, simultaneously introducing chlorine-containing branch chains as Cl reservoir to deposit AgCl. The composite gels presented pH responsive swelling properties, with the minimum swelling ratio at pH 8 and pH 4 for CMC gels containing Ag/AgCl and ZnO, respectively. Zn2+ release from the nanocomposite gels was much greater in acidic than in neutral. Photocatalytic degradation constants of methyl orange by the composite gels under sunlight were greater than UV irradiation. Ag/AgCl loaded gel showed a degradation rate of 71.3 % under sunlight for 1 h, with a rate constant approximately 10.2 times higher than ZnO loaded gel. Extract liquids with the gel content below 0.33 mg/mL were noncytotoxicity. The nanocomposite gels presented good bactericidal rate against E. coli and S. aureus under sunlight for 6 h, comparatively to those in dark for 24 h. Bacteriostatic activity of Ag/AgCl loaded gel under sunlight for 6 h was much greater than that in dark for 24 h. The biocompatible nanocomposite gels with sunlight-catalyzed antibacterial activity would broaden the application of CMC gels.

Development of Plum Seed-Derived Carboxymethylcellulose Bioink for 3D Bioprinting

Three-dimensional bioprinting represents an innovative platform for fabricating intricate, three-dimensional (3D) tissue structures that closely resemble natural tissues. The development of hybrid bioinks is an actionable strategy for integrating desirable characteristics of components. In this study, cellulose recovered from plum seed was processed to synthesize carboxymethyl cellulose (CMC) for 3D bioprinting. The plum seeds were initially subjected to α-cellulose recovery, followed by the synthesis and characterization of plum seed-derived carboxymethyl cellulose (PCMC). Then, hybrid bioinks composed of PCMC and sodium alginate were fabricated, and their suitability for extrusion-based bioprinting was explored. The PCMC bioinks exhibit a remarkable shear-thinning property, enabling effortless extrusion through the nozzle and maintaining excellent initial shape fidelity. This bioink was then used to print muscle-mimetic 3D structures containing C2C12 cells. Subsequently, the cytotoxicity of PCMC was evaluated at different concentrations to determine the maximum acceptable concentration. As a result, cytotoxicity was not observed in hydrogels containing a suitable concentration of PCMC. Cell viability was also evaluated after printing PCMC-containing bioinks, and it was observed that the bioprinting process caused minimal damage to the cells. This suggests that PCMC/alginate hybrid bioink can be used as a very attractive material for bioprinting applications.

Antibacterial Gelatin Composite Hydrogels Comprised of In Situ Formed Zinc Oxide Nanoparticles

We report the feasibility of using gelatin hydrogel networks as the host for the in situ, environmentally friendly formation of well-dispersed zinc oxide nanoparticles (ZnONPs) and the evaluation of the antibacterial activity of the as-prepared composite hydrogels. The resulting composite hydrogels displayed remarkable biocompatibility and antibacterial activity as compared to those in previous studies, primarily attributed to the uniform distribution of the ZnONPs with sizes smaller than 15 nm within the hydrogel network. In addition, the composite hydrogels exhibited better thermal stability and mechanical properties as well as lower swelling ratios compared to the unloaded counterpart, which could be attributed to the non-covalent interactions between the in situ formed ZnONPs and polypeptide chains. The presence of ZnONPs contributed to the disruption of bacterial cell membranes, the alteration of DNA molecules, and the subsequent release of reactive oxygen species within the bacterial cells. This chain of events culminated in bacterial cell lysis and DNA fragmentation. This research underscores the potential benefits of incorporating antibacterial agents into hydrogels and highlights the significance of preparing antimicrobial agents within gel networks.

Muscle-inspired anisotropic carboxymethyl cellulose-based double-network conductive hydrogels for flexible strain sensors

Conductive hydrogels are considered one of the most promising materials for preparing flexible sensors due to their flexible and extensible properties. However, conventional hydrogels' weak mechanical and isotropic properties are greatly limited in practical applications. Here, the internal structure of the hydrogel was regulated by pre-stretching synergistic ion crosslinking to construct a carboxymethyl cellulose-based double network-oriented hydrogel similar to muscle. The introduction of pre-stretching increased the tensile strength of the double-network hydrogel from 1.45 MPa to 4.32 MPa, and its light transmittance increased from 67.3 % to 84.5 %. In addition, the hydrogel's thermal stability and electrical conductivity were improved to a certain extent. Its good mechanical properties and conductive properties can be converted into stable electrical signal output during deformation. The carboxymethyl cellulose-based double network oriented hydrogels were further assembled as flexible substrates into flexible sensor devices. The hydrogel sensors can monitor simple joint movements as well as complex spatial movements, which makes them have potential application value in the research field of intelligent response electronic devices such as flexible wearables, intelligent strain sensing, and soft robots.

Development of carboxymethyl cellulose-graphene oxide biobased composite for the removal of methylene blue cationic dye model contaminate from wastewater

Utilizing Glutaraldehyde crosslinked sodium carboxymethyl cellulose (CMC-GA) hydrogel and its nanographene oxide composite (CMC-GA-GOx), an effective carboxymethyl cellulose-graphene oxide biobased composites adsorbent was developed for the adsorption removal of methylene blue (MB) cationic dye contaminate from industrial wastewater. The CMC-GA-GOx composites developed were characterized using FTIR, RAMAN, TGA, SEM, and EDX analysis instruments. Through batch experiments, several variables affecting the removal of MB dye, including the biocomposites GO:CMC composition, adsorption time, pH and temperature, initial MB concentration, adsorbent dosage, and NaCl concentration, were investigated under different conditions. The maximum dye removal percentages ranged between 93 and 98%. They were obtained using biocomposites CMC-GA-GO102 with 20% GO weight percent, adsorption time 25 min, adsorption temperature 25 °C, MB concentrations 10-30 ppm, adsorption pH 7.0, and 0.2 g adsorbent dose. The experimental data of the adsorption process suit the Langmuir isotherm more closely with a maximal monolayer adsorption capacity of 76.92 mg/g. The adsorption process followed the kinetic model of pseudo-second order. The removal of MB was exothermic and spontaneous from a thermodynamic standpoint. In addition, thermodynamic results demonstrated that adsorption operates most effectively at low temperatures. Finally, the reusability of the developed CMC-GA-GO102 has been proved through 10 successive cycles where only 14% of the MB dye removal percentage was lost. These results suggest that the developed CMC-GA-GO102 composite may be an inexpensive and reusable adsorbent for removing organic cationic dyes from industrial wastewater.

Metal-Polymer Nanocomposites: A Promising Approach to Antibacterial Materials

There has been a new approach in the development of antibacterials in order to enhance the antibacterial potential. The nanoparticles are tagged on to the surface of other metals or metal oxides and polymers to achieve nanocomposites. These have shown significant antibacterial properties when compared to nanoparticles. In this article we explore the antibacterial potentials of metal-based and metal-polymer-based nanocomposites, various techniques which are involved in the synthesis of the metal-polymer, nanocomposites, mechanisms of action, and their advantages, disadvantages, and applications.

Antimicrobial Nano-Zinc Oxide Biocomposites for Wound Healing Applications: A Review

Chronic wounds are a major concern for global health, affecting millions of individuals worldwide. As their occurrence is correlated with age and age-related comorbidities, their incidence in the population is set to increase in the forthcoming years. This burden is further worsened by the rise of antimicrobial resistance (AMR), which causes wound infections that are increasingly hard to treat with current antibiotics. Antimicrobial bionanocomposites are an emerging class of materials that combine the biocompatibility and tissue-mimicking properties of biomacromolecules with the antimicrobial activity of metal or metal oxide nanoparticles. Among these nanostructured agents, zinc oxide (ZnO) is one of the most promising for its microbicidal effects and its anti-inflammatory properties, and as a source of essential zinc ions. This review analyses the most recent developments in the field of nano-ZnO–bionanocomposite (nZnO-BNC) materials—mainly in the form of films, but also hydrogel or electrospun bandages—from the different preparation techniques to their properties and antibacterial and wound-healing performances. The effect of nanostructured ZnO on the mechanical, water and gas barrier, swelling, optical, thermal, water affinity, and drug-release properties are examined and linked to the preparation methods. Antimicrobial assays over a wide range of bacterial strains are extensively surveyed, and wound-healing studies are finally considered to provide a comprehensive assessment framework. While early results are promising, a systematic and standardised testing procedure for the comparison of antibacterial properties is still lacking, partly because of a not-yet fully understood antimicrobial mechanism. This work, therefore, allowed, on one hand, the determination of the best strategies for the design, engineering, and application of n-ZnO-BNC, and, on the other hand, the identification of the current challenges and opportunities for future research.

Carboxymethyl cellulose based sustainable hydrogel for colon-specific delivery of gentamicin

The current research includes the synthesis, improvement of NaCMC-cl-DMAA/AAc hydrogel and in-situ controlled release of gentamicin within various pH environments. The prepared hydrogel was then modified using boron nitride nanosheets aiming to enhancement in the adsorption rate. The prepared hydrogels were investigated by FTIR, XRD, FESEM, TGA/DSC, swelling and cell viability analysis. Cytotoxicity study indicated that prepared sample has a cytocompatibility nature towards healthy normal human cell line (FR2 cells). By changing the pH environment, the drug release properties of the hydrogels can be controlled. The cumulative rate of release for NaCMC-cl-DMAA/AAc hydrogel was 76.5 % at pH = 2.2 and 87.5 % at pH = 7.4. Whereas drug release rate for NaCMC-cl-DMAA/AAc-BNNSs hydrogel composite was 78.6 % at pH = 2.2 and 97.3 % at pH = 7.4 within 4320 min. Gentamicin release kinetics have been determined using the Korsemeyar-Peppas model, which confirms the drug release mechanism.

Construction of strong and tough carboxymethyl cellulose-based oriented hydrogels by phase separation

Anisotropic hydrogels have attracted extensive attention because they are similar to natural hydrogel-like materials and exhibit superiority and new functions that isotropic hydrogels cannot. Here, we fabricated strong and tough carboxymethyl cellulose-based conductive hydrogels with oriented hierarchical structures through pre-stretching, solvent displacement induced phase separation, and subsequent ionic crosslinking immobilization. Solvent displacement made the pre-stretched carboxymethyl cellulose-based polymer network more dense and linear, while the toughness of the hydrogel was further improved under the effect of phase separation. Strong and tough hydrogels were prepared by combining pre-stretching and phase separation; the variation range (tensile strength of 2.24-6.19 MPa and toughness of 19.41-22.92 MJ/m³) can be adjusted by the stretching ratio. Compared with traditional carboxymethyl cellulose-based hydrogels, the tensile strength and toughness were increased by 49 times and 15 times, respectively. In addition, the hydrogels had good underwater stability, ion cross-linking made the hydrogels have good conductivity, and the directional stratification structure gave the hydrogels conductive anisotropy. These characteristics give hydrogel sensors broad application prospects in flexible wearable devices, anisotropic sensors, and intelligent underwater devices.

Development and Evaluation of Cellulose Derivative and Pectin Based Swellable pH Responsive Hydrogel Network for Controlled Delivery of Cytarabine

In the present study, pH-sensitive, biodegradable, and biocompatible Na-CMC/pectin poly(methacrylic acid) hydrogels were synthesized using an aqueous free radical polymerization technique and encapsulated by cytarabine (anti-cancer drug). The aim of the project was to sustain the plasma profile of cytarabine through oral administration. Sodium carboxymethyl cellulose (Na-CMC) and pectin were cross-linked chemically with methacrylic acid (MAA) as a monomer, using methylene bisacrylamide (MBA) as cross-linker and ammonium per sulfate (APS) as an initiator. Prepared hydrogel formulations were characterized for their texture, morphology, cytarabine loading efficiency, compositional and structural properties, thermal nature, stability, swelling response, drug release profile (pH 1.2 and pH 7.4), and in-vivo pharmacokinetic evaluation. Cytarabine-loaded hydrogels were also evaluated for their safety profile by carrying out toxicity studies in rabbits. Results demonstrated efficient encapsulation of cytarabine into the prepared network with loading ranging from 48.5-82.3%. The highest swelling ratio of 39.38 and maximum drug release of 83.29-85.27% were observed at pH 7.4, highlighting the pH responsiveness of the grafted system. Furthermore, cytarabine maximum release was noticed over 24 h, ensuring a sustained release response for all formulations. Histopathological studies and hemolytic profiles confirmed that the prepared hydrogel system was safe, biocompatible, and non-irritant, showing no symptoms of any toxicities and degeneration in organs. Moreover, pharmacokinetic estimation of the cytarabine-loaded hydrogel showed a remarkable increase in the plasma half-life from 4.44 h to 9.24 h and AUC from 22.06 μg/mL.h to 56.94 μg/mL.h. This study revealed that the prepared hydrogel carrier system has excellent abilities in delivering the therapeutic moieties in a controlled manner.

Rheological Properties of Sodium Carboxymethylcellulose Solutions in Dihydroxy Alcohol/Water Mixtures

The aim of the research presented in this paper was to determine the effect of dihydroxy alcohols on the rheological properties of sodium carboxymethylcellulose (Na-CMC) solutions with different degrees of substitution and different average molecular masses. Rheological measurements were carried out with a rotational rheometer in continuous and oscillatory flows. Two dihydroxy alcohols were used in the study: butane-1,3-diol and propane-1,2-diol. The concentration of Na-CMC in the solutions was 1.6% and 2.2%, while the concentration of the dihydroxy alcohols ranged from 10% to 60%. The measurements show that the viscoelastic properties of Na-CMC solutions are strongly linked to the type of solvent used. The application of low-substituted high-molecular-mass Na-CMC makes it possible to obtain fluids with the properties of weak physical gels. On the other hand, the dissolution of Na-CMC with a high degree of substitution (>1) and low molecular mass in dihydroxy alcohol/water mixtures yields a viscoelastic fluid. Based on oscillatory measurements, increasing concentrations of polyhydroxy alcohols in Na-CMC solutions were found to induce an increase in the strength of the network structure. At the same concentrations of polyhydroxy alcohols in solutions containing butane-1,3-diol, a stronger network structure is formed compared to solutions containing propane-1,2-diol. The rheological measurement results presented in this paper may be useful in the formulation of drug carriers and cosmetics in which rheological properties are a significant factor.

Synthesis and Applications of Carboxymethyl Cellulose Hydrogels

Hydrogels are basic materials widely used in various fields, especially in biological engineering and medical imaging. Hydrogels consist of a hydrophilic three-dimensional polymer network that rapidly expands in water and can hold a large volume of water in its swelling state without dissolving. These characteristics have rendered hydrogels the material of choice in drug delivery applications. In particular, carboxymethyl cellulose (CMC) hydrogels have attracted considerable research attention for the development of safe drug delivery carriers because of their non-toxicity, good biodegradability, good biocompatibility and low immunogenicity. Aiming to inspire future research in this field, this review focuses on the current preparation methods and applications of CMC gels and highlights future lines of research for the further development of diverse applications.

Radiation Synthesis of Green Nanoarchitectonics of Guar Gum-Pectin/Polyacrylamide/Zinc Oxide Superabsorbent Hydrogel for Sustainable Agriculture

In the current study, the performance of superabsorbent hydrogel composites comprised of Guar gum-Pectin/Polyacrylamide/ZnO crosslinked with gamma irradiation (10 kGy) has been investigated for sustainable agriculture. The claimed composites (GG/PC/PAAm/ZnOx) were characterized by FTIR, TGA, and AFM. The swelling capacity data reveal that the equilibrium water swelling (EW) of the composites was increased by increasing the ZnO content from 600 to 1050 g/g for zero to the highest concentration of ZnO, respectively. Furthermore, the physical properties of the soil mixed with the hydrogels were improved; water holding capacity (WHC) increased to 66% and water retention (WR) kept at 15% after 20 days. The composites showed a good degradability in the biodegradation test. They also portrayed super-absorption capacity at three swelling/deswelling cycles. This advancement is important for reducing water consumption through the irrigation of arid lands. The prepared composites were proved as excellent candidates in sustainable agriculture applications.

Rapid preparation of ZnO nanocomposite hydrogels by frontal polymerization of a ternary DES and performance study

A deep eutectic solvent (DES) was synthesized from urea (U), acrylamide (AM), and choline chloride (ChCl). ZnO was dispersed in the DES as a filler, and nanocomposite hydrogels (ZnO/P(U-AM-ChCl)) were successfully prepared by frontal polymerization (FP). The hydrogels were verified by Fourier infrared spectroscopy to contain ZnO nanoparticles (ZnO-NPs). The swelling behaviour, conductivity, and antibacterial properties of the ZnO nanocomposite hydrogels were investigated. The results showed that the ZnO/P(U-AM-ChCl) hydrogels had excellent antibacterial properties and exhibited super high inhibition rates of 81.87% and 88.42% against two basic colonies of Gram-negative and Gram-positive bacteria, respectively. The equilibrium swelling of the hydrogels was found to increase significantly from 9.30 to 12.29 with the addition of ZnO, while the ZnO/P(U-AM-ChCl) hydrogel conductivity exhibited good UV sensitivity. This study provides a rapid and low-energy method for the preparation of nanocomposite hydrogels with excellent antibacterial properties.

Efficient fabrication, antibacterial and catalytic performance of Ag-NiO loaded bacterial cellulose paper

This study reports the synthesis of bacterial cellulose (BC) hydrogel sheets and their utilization as a support for silver‑nickel oxide nanocomposites (Ag/NiO). A two-step facile hydrothermal method was employed for the preparation of Ag/NiO, followed by impregnation into BC hydrogel sheets. A 20% Ag/NiO composition was revealed by dry weight analysis. The stability of nanocomposites-Hydrogel was confirmed by Ag⁺ and Ni²⁺ ion release study. The catalytic activity of the BC-Ag/NiO was evaluated against chemical reduction of congo red, methyl orange and methylene blue. The reduction reaction followed pseudo first order kinetics and k_app values of 0.1147 min^-1, 0.1323 min^-1 and 0.12989 min^-1 were obtained for CR, MO, and MB dyes, respectively. The BC-Ag/NiO catalyst could be easily recovered and re-used in another reaction without centrifugation. The synthesized nanocomposites hydrogel was also tested for its antibacterial activity against Gram-negative bacteria, Escherichia coli (E.coli) and Gram-positive bacteria, Staphylococcus aureus (S.aureus).

Metal nanoparticles supported chitosan coated carboxymethyl cellulose beads as a catalyst for the selective removal of 4-nitrophenol

In the area of water pollution treatment, the coupling of biopolymers with metal/metal nanoparticles is getting a lot of interest these days. Herein, carboxymethyl cellulose (CMC) beads and chitosan (Cs) coated CMC beads were employed as a support for copper nanoparticles, (Cu/CMC) and (Cu/Cs@CMC), respectively. Following that, a reducing agent (NaBH₄) was used to convert Cu/CMC and Cu/Cs@CMC beads to zero valent. The developed beads were employed for catalytic reductions of nitrophenol, dyes, and potassium hexacyanoferrate (III) in their mixed solution with NaBH₄. Cu/Cs@CMC beads were more efficient compared to Cu/CMC beads toward selected pollutants. The reduction rate constants of 4-NP, MO, EY and K₃[Fe(CN)₆] by utilizing Cu/Cs@CMC were 3.8 × 10^-1, 4.0 × 10^-1, 1.4 × 10^-1 and 4.48 × 10^-1 min^-1, respectively. Further, the catalytic activity of the Cu/Cs@CMC beads were optimized using 4-NP as a model compound for this study. Cu/Cs@CMC beads were able to use up to three cycles compared to Cu/CMC beads without losing catalytic activity in the reduction of 4-NP, according to the recyclability and reusability study of both beads. The chitosan coating beads Cu/Cs@CMC was simply prepared and have good catalytic activity, recyclable, and more efficient than Cu/CMC beads due to their high strength and stability.

Toxicity of selenium nanoparticles on Poterioochromonas malhamensis algae in Waris-H culture medium and Lake Geneva water: Effect of nanoparticle coating, dissolution, and aggregation

Understanding the algal toxicity of selenium nanoparticles (SeNPs) in aquatic systems by considering SeNPs physicochemical properties and environmental media characteristics is a concern of high importance for the evaluation and prediction of risk assessment. In this study, chitosan (CS) and sodium carboxymethyl cellulose (CMC) coated SeNPs are considered using Lake Geneva water and a Waris-H cell culture medium to investigate the effect of SeNPs on the toxicity of algae Poterioochromonas malhamensis, a widespread mixotrophic flagellate. The influence of surface coating, z-average diameters, ζ-potentials, aggregation behavior, ions release, and medium properties on the toxicity of SeNPs to algae P. malhamensi was investigated. It is found that SeNPs are 5-10 times more toxic in Lake Geneva water compared to the culture medium, suggesting that the traditional algal tests in Waris-H culture medium currently underestimate the toxicity of NPs in a natural water environment. Despite significant dissolution, it is also found that SeNPs themselves are the toxicity driver, and dissolved ions have only a marginal influence on toxicity. SeNPs diameter is found a minor factor in toxicity. Based on a principal component analysis (PCA) it is found that in Lake Geneva water, the nature of the surface coating (CMC versus CS) is the most influential factor controlling the toxicity of SeNPs. In the culture medium, surface coating, ζ-potential, and aggregation are found to contribute at the same level. These results highlight the importance of considering in details both NPs intrinsic and media properties in the evaluation of NPs biological effects.

Functional Hydrogels for Treatment of Chronic Wounds

Chronic wounds severely affect 1-2% of the population in developed countries. It has been reported that nearly 6.5 million people in the United States suffer from at least one chronic wound in their lifetime. The treatment of chronic wounds is critical for maintaining the physical and mental well-being of patients and improving their quality of life. There are a host of methods for the treatment of chronic wounds, including debridement, hyperbaric oxygen therapy, ultrasound, and electromagnetic therapies, negative pressure wound therapy, skin grafts, and hydrogel dressings. Among these, hydrogel dressings represent a promising and viable choice because their tunable functional properties, such as biodegradability, adhesivity, and antimicrobial, anti-inflammatory, and pre-angiogenic bioactivities, can accelerate the healing of chronic wounds. This review summarizes the types of chronic wounds, phases of the healing process, and key therapeutic approaches. Hydrogel-based dressings are reviewed for their multifunctional properties and their advantages for the treatment of chronic wounds. Examples of commercially available hydrogel dressings are also provided to demonstrate their effectiveness over other types of wound dressings for chronic wound healing.

Functionalization and Antibacterial Applications of Cellulose-Based Composite Hydrogels

Pathogens, especially drug-resistant pathogens caused by the abuse of antibiotics, have become a major threat to human health and public health safety. The exploitation and application of new antibacterial agents is extremely urgent. As a natural biopolymer, cellulose has recently attracted much attention due to its excellent hydrophilicity, economy, biocompatibility, and biodegradability. In particular, the preparation of cellulose-based hydrogels with excellent structure and properties from cellulose and its derivatives has received increasing attention thanks to the existence of abundant hydrophilic functional groups (such as hydroxyl, carboxy, and aldehyde groups) within cellulose and its derivatives. The cellulose-based hydrogels have broad application prospects in antibacterial-related biomedical fields. The latest advances of preparation and antibacterial application of cellulose-based hydrogels has been reviewed, with a focus on the antibacterial applications of composite hydrogels formed from cellulose and metal nanoparticles; metal oxide nanoparticles; antibiotics; polymers; and plant extracts. In addition, the antibacterial mechanism and antibacterial characteristics of different cellulose-based antibacterial hydrogels were also summarized. Furthermore, the prospects and challenges of cellulose-based antibacterial hydrogels in biomedical applications were also discussed.

The preparation of novel poly(ether-amide)s based on spiro[fluorene-9,9′-xanthene] and a polyamide/polymer-coated ZnO nanocomposite: thermal, optical, biological, and methylene blue dye adsorption attributes

Novel thermostable, photoactive, and solvable polyamides containing fluorene and xanthene groups were synthesized, as was a ZnO-based composite. These compounds were used as antibacterial and anticancer agents and as absorbents to remove MB dye.

Formulation of Microwave-Assisted Natural-Synthetic Polymer Composite Film and Its Physicochemical Characterization

This study is aimed at microwave-assisted synthesis of sodium carboxymethylcellulose and Eudragit L100 composite film and its physicochemical characterization. The film was developed with varying quantities of each polymer and treated with microwave at a fixed frequency of 2450 MHz with a power of 350 Watts for 60 and 120 s. All formulations were characterized for thickness/weight uniformity, moisture adsorption, erosion and water uptake, tensile strength, and vibrational, thermal, and surface morphological analysis in comparison with untreated film samples. Results indicated that microwave treatment for 60 s significantly improved the tensile strength, reduced the water adsorption, delayed erosion, and reduced the water uptake in comparison with the untreated and 120 s treated film formulations. The vibrational analysis revealed rigidification of hydrophilic domains at OH/NH moiety and fluidization of hydrophobic domains at asymmetric and symmetric CH moieties, which is envisaged to be due to the formation of new linkages between the two polymers. These were later confirmed by thermal analysis where a significant rise in transition temperature, as well as enthalpy of the system, was recorded. The microwave treatment for 60 s is thus advocated to be the best treatment condition for developing sodium carboxymethylcellulose and Eudragit L100 composite polymeric films.

Role and Merits of Green Based Nanocarriers in Cancer Treatment

Simple Summary

The use of chemotherapy drugs against tumours is associated with various drawbacks such as poor solubility, low stability, high toxicity, lack of selectivity and rapid clearance. Nanocarriers can improve the safety and efficiency of drugs by increasing their solubility, enhance their circulation time and improve their uptake into cancer cells. Natural materials can be incorporated in the fabrication of nanocarriers as a substitute to synthetic ingredients. Several studies developed different types of green based nanocarriers using materials obtained from plant or microbial sources such as polysaccharides and polyphenols without the need of toxic chemicals in the synthesis. The green components can have many roles for example as mechanical support, trigger pH response for drug release, or act as a targeting ligand. The inclusion of these green components will support the cost effective and feasible large-scale production of nanocarriers with minimum negative impact on the environment.

Abstract

The use of nanocarriers for biomedical applications has been gaining interests from researchers worldwide for the delivery of therapeutics in a controlled manner. These “smart” vehicles enhance the dissolution and the bioavailability of drugs and enable their delivery to the target site. Taking the potential toxicity into consideration, the incorporation of natural “green” materials, derived from plants or microbial sources, in the nanocarriers fabrication, improve their safety and biocompatibility. These green components can be used as a mechanical platform or as targeting ligand for the payload or can play a role in the synthesis of nanoparticles. Several studies reported the use of green based nanocarriers for the treatment of diseases such as cancer. This review article provides a critical analysis of the different types of green nanocarriers and their synthesis mechanisms, characterization, and their role in improving drug delivery of anticancer drugs to achieve precision cancer treatment. Current evidence suggests that green-based nanocarriers can constitute an effective treatment against cancer.

Engineering nanocomposite hydrogels using dynamic bonds

Nanocomposite (NC) hydrogels are promising biomaterials that possess versatile properties and functions for biomedical applications such as drug delivery, biosensor development, imaging and tissue engineering. Different strategies and chemistries have been utilized to define the structure and properties of NC hydrogels. In this review, we discuss NC hydrogels synthesized using dynamic bonds, including dynamic covalent bonds (e.g., Schiff base and boronate ester bond) and non-covalent bonds (e.g., hydrogen bonds and metal-ligand coordination). Dynamic bonds can reversibly break and reform to provide self-healing properties to NC hydrogels as well as be influenced by external factors to allow NC hydrogels with stimulus-responsiveness. The presence of dynamic bonds in NC hydrogels can occur at the polymer-polymer or polymer-particle interfaces, which also determines whether the particles act as fillers or crosslinkers in hydrogels. Several representative examples of NC hydrogels fabricated using dynamic bonds are discussed here, focusing on their design, preparation, properties, applications and future prospects. STATEMENT OF SIGNIFICANCE: This review provides an overview of the current progress in NC hydrogel development using dynamic bonds, summarizing the material design, fabrication approaches, unique performance and promising biomedical applications. The presence of both nanoparticles and dynamic bonds in hydrogels shows a combined or synergistic effect to provide hydrogels with dynamic features, definable properties, multi-functionality and stimulus-responsiveness for advanced applications. We believe that this review will be of interest to the hydrogel community and inspire researchers to develop next-generation hydrogels.

Simple and Fast One-Pot Cellulose Gel Preparation in Aqueous Pyrrolidinium Hydroxide Solution-Cellulose Solvent and Antibacterial Agent

Cellulose is the main component of biomass and is the most abundant biopolymer on earth; it is a non-toxic, low-cost material that is biocompatible and biodegradable. Cellulose gels are receiving increasing attention as medical products, e.g., as wound dressings. However, the preparation of cellulose hydrogels employing unmodified cellulose is scarcely reported because of the cumbersome dissolution of cellulose. In previous studies, we developed the new promising cellulose solvent N-butyl-N-methylpyrrolidinium hydroxide in an aqueous solution, which can dissolve up to 20 wt% cellulose within a short time at room temperature. In this study, we employed this solvent system and investigated the gelation behavior of cellulose after crosslinker addition. The swelling behavior in water (swelling ratio, water uptake), the mechanical properties under compression, and the antibacterial activity against Escherichia coli and Bacillus subtilis were investigated. We have developed a simple and fast one-pot method for the preparation of cellulose gels, in which aqueous pyrrolidinium hydroxide solution was acting as the solvent and as an antibacterial reagent. The pyrrolidinium hydroxide content of the gels was controlled by adjustment of the water volume employed for swelling. Simple recovery of the solvent system was also possible, which makes this preparation method environmentally benign.

Facile Synthesis and Characterization of Palm CNF-ZnO Nanocomposites with Antibacterial and Reinforcing Properties

Cellulose nanofibers (CNF) isolated from plant biomass have attracted considerable interests in polymer engineering. The limitations associated with CNF-based nanocomposites are often linked to the time-consuming preparation methods and lack of desired surface functionalities. Herein, we demonstrate the feasibility of preparing a multifunctional CNF-zinc oxide (CNF-ZnO) nanocomposite with dual antibacterial and reinforcing properties via a facile and efficient ultrasound route. We characterized and examined the antibacterial and mechanical reinforcement performances of our ultrasonically induced nanocomposite. Based on our electron microscopy analyses, the ZnO deposited onto the nanofibrous network had a flake-like morphology with particle sizes ranging between 21 to 34 nm. pH levels between 8-10 led to the formation of ultrafine ZnO particles with a uniform size distribution. The resultant CNF-ZnO composite showed improved thermal stability compared to pure CNF. The composite showed potent inhibitory activities against Gram-positive (methicillin-resistant Staphylococcus aureus (MRSA)) and Gram-negative Salmonella typhi (S. typhi) bacteria. A CNF-ZnO-reinforced natural rubber (NR/CNF-ZnO) composite film, which was produced via latex mixing and casting methods, exhibited up to 42% improvement in tensile strength compared with the neat NR. The findings of this study suggest that ultrasonically-synthesized palm CNF-ZnO nanocomposites could find potential applications in the biomedical field and in the development of high strength rubber composites.

Emerging Role of Hydrogels in Drug Delivery Systems, Tissue Engineering and Wound Management

The popularity of hydrogels as biomaterials lies in their tunable physical properties, ability to encapsulate small molecules and macromolecular drugs, water holding capacity, flexibility, and controllable degradability. Functionalization strategies to overcome the deficiencies of conventional hydrogels and expand the role of advanced hydrogels such as DNA hydrogels are extensively discussed in this review. Different types of cross-linking techniques, materials utilized, procedures, advantages, and disadvantages covering hydrogels are tabulated. The application of hydrogels, particularly in buccal, oral, vaginal, and transdermal drug delivery systems, are described. The review also focuses on composite hydrogels with enhanced properties that are being developed to meet the diverse demand of wound dressing materials. The unique advantages of hydrogel nanoparticles in targeted and intracellular delivery of various therapeutic agents are explained. Furthermore, different types of hydrogel-based materials utilized for tissue engineering applications and fabrication of contact lens are discussed. The article also provides an overview of selected examples of commercial products launched particularly in the area of oral and ocular drug delivery systems and wound dressing materials. Hydrogels can be prepared with a wide variety of properties, achieving biostable, bioresorbable, and biodegradable polymer matrices, whose mechanical properties and degree of swelling are tailored with a specific application. These unique features give them a promising future in the fields of drug delivery systems and applied biomedicine.

Carboxymethyl cellulose nanocomposite beads as super-efficient catalyst for the reduction of organic and inorganic pollutants

Carboxymethyl cellulose/copper oxide-nickel oxide (CMC/CuO-NiO) nanocomposite beads were prepared by facile, simple and environmentally friendly method. Initially, CuO-NiO was prepared and applied for the catalytic reduction of 4-nitrophenol (4-NP). The results showed that CuO-NiO demonstrate high catalytic activity toward the reduction of 4-NP to 4-aminophenol (4-AP) with a rate constant of 2.97 × 10^-2 s^-1. Further, CuO-NiO were well-dispersed in the polymeric matrix of carboxymethyl cellulose to prepare CMC/CuO-NiO beads. CMC/CuO-NiO nanocomposite beads were also applied to catalyze the reduction of potassium ferrocyanide (K₃Fe (CN)₆), 4-NP, Congo red (CR) and Eosin yellow (EY) in the presence of sodium borohydride. Experimental data indicated that CMC/CuO-NiO nanocomposite has higher catalytic activity and high rate constant compared to CuO-NiO. The rate constant found to be 6.88 × 10^-2, 6.27 × 10^-2, 1.89 × 10^-2 and 2.43 × 10^-2 for K₃Fe(CN)₆, 4-NP, CR and EY, respectively, using 5 mg CMC/CuO-NiO beads. FE-SEM, EDX, FTER, XRD and XPS were used to characterize the nanocomposites. CMC/CuO-NiO beads catalytically reduced up to 95-99% of K₃Fe(CN)₆, 4-NP, CR and EY within 40, 60, 120 and 120 s. CMC/CuO-NiO beads were found more selective for the reduction of 4-NP. The catalytic reduction performance of CMC/CuO-NiO beads was optimized by studying the influence of different parameters on the catalytic reduction of 4-NP. Hence, the effective and super catalytic performance toward the reduction of different organic and inorganic pollutants makes CMC/CuO-NiO beads a smart material and suitable for numerous scientific and industrial applications and may be used as an alternative to high-cost commercial catalysts.

Antibacterial Properties and pH Sensitive Swelling of Insitu Formed Silver-Curcumin Nanocomposite Based Chitosan Hydrogel

A simple method was used to prepare curcumin/silver nanocomposite based chitosan hydrogel. In an alkaline medium, chitosan and chitosan nanocomposite hydrogels were prepared using the physical crosslinking method. The prepared hydrogels were stable for a long period at room temperature. In one step, silver nanoparticles were prepared insitu using silver nitrate solution and curcumin oxide within the hydrogel network formation. In the meantime, curcumin compound served as both a reducing and stabilizing agent. The structure and surface morphology of nanocomposite hydrogels were characterized by FTIR, SEM, and EDX analysis confirmed the formation of silver nanoparticles within the hydrogel network. Moreover, Images of TEM showed a spherical shape of silver nanoparticles with an average size of 2–10 nm within the matrix of the hydrogel. The formation mechanism of nanocomposite based hydrogel was reported. Besides that, the effect of chitosan and silver nitrate concentrations were studied. The swelling capacity of the prepared nanocomposite hydrogels was also performed at different pH of 4, 7, and 9. From the experimental results, the swelling capacity of hydrogels depends on the concentrations of chitosan and silver nitrate. The prepared composite based hydrogel exceeds a higher swelling degree than chitosan hydrogels at low pH. The antibacterial activity of the nanocomposite hydrogels was also examined; the results showed that the prepared nanocomposite hydrogels outperformed the pure chitosan hydrogels. This shows them to be a promising material for the biomedical field as a wound dressing and drug release.