Novel multilayer microcapsules based on soy protein isolate fibrils and high methoxyl pectin: Production, characterization and release modeling

Investigating the antibacterial mode of Limosilactobacillus reuteri LR08 regulated by soybean proteins and peptides

Soybean proteins (pro) and soybean peptides (pep) are beneficial to the growth and metabolism of Limosilactobacillus reuteri (L. reuteri). However, whether they could assist L. reuteri in inhibiting intestinal pathogens and the inhibition mode of them is still unclear. In this study, a co-culture experiment of L. reuteri LR08 with Escherichia coli JCM 1649 (E. coli) was performed. It showed that pro and pep could still favour the growth of L. reuteri over E. coli under their competition. The inhibition zone experiment showed the digested soybean proteins (dpro) could improve its antibacterial activity by increasing the secretion of organic acids from L. reuteri. Furthermore, digested soybean peptides (dpep) could enhance nitrogen utilization capacity of L. reuteri over E. coli. These results explained the patterns of dpro and dpep assisting L. reuteri in inhibiting the growth of E. coli by regulating its organic acid secretion and the ability of nitrogen utilization.

Fabrication and characterization of alginate-zein core-shell microcapsules for controlled release of buckwheat honey

In this study, extrusion method was employed to fabricate alginate-zein core-shell microcapsules loaded with buckwheat honey by dropping alginate and buckwheat honey mixture solution into a 70.0 % zein ethanol solution(v/v) containing 5.0 % CaCl2 solution (wt%). The microcapsules were constructed by two parts: 1) the formation of hydrophilic beads through the crosslinking of alginate chains with Ca2+; 2) the introduction of alginate beads into the aqueous zein ethanol solution which decreased the ethanol concentration, prompting the precipitation of zein and the deposition of zein nanoparticles onto the surfaces of alginate beads. Comparing with the alginate beads, the prepared microcapsules not only possessed better water-holding capacity, but also achieved controlled release of buckwheat honey. Importantly, the microcapsules significantly retained the antioxidant activity of the buckwheat honey. Therefore, this innovative method for fabricating alginate-zein core-shell microcapsules can suggest a promising approach to broaden the application of buckwheat honey in the food field.

Advances in protein-based microcapsules and their applications: A review

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy.

Wheat gluten amyloid fibrils: Conditions, mechanism, characterization, application, and future perspectives

Amyloid fibrils have excellent structural characteristics, such as a high aspect ratio, excellent stiffness, and a wide availability of functional groups on the surface. More studies are now focusing on the formation of amyloid fibrils using food proteins. Protein fibrillation is now becoming recognized as a promising strategy for enhancing the function of food proteins and expanding their range of applications. Wheat gluten is rich in glutamine (Q), hydrophobic amino acids, and the α-helix structure with high β-sheet tendency. These characteristics make it very easy for wheat gluten to form amyloid fibrils. The conditions, formation mechanism, characterization methods, and application of amyloid fibrils formed by wheat gluten are summarized in this review. Further exploration of amyloid fibrils formed by wheat gluten will reveal how they can play a significant role in food, biology, and other fields, especially in medicine.

Strategies for improving loading of emulsion-based functional oil powder

Functional oil is type of oil that is beneficial to human health and has nutritional value, however, functional oils are rich in bioactive substances such as polyunsaturated fatty acids which are sensitive to environmental factors and are susceptible to oxidation or decomposition. Construction of emulsion-based oil powder is a promising approach for improving the stability and solubility of functional oils. However, the low effective loading of oil in powder is the main challenge limiting encapsulation technology. This manuscript focuses on reviewing the current research progress of emulsion-based functional oil powder construction and systematically summarizes the processing characteristics of emulsion-based oil powder with high payload and summarizing the strategies to enhance the payload of powder in term of emulsification and drying, respectively. The impact of emulsion formation on oil powder production is discussed from different characteristics of emulsions, including emulsion composition, emulsification methods and emulsion types. In addition, the current status of improving material loading performance by various modifications to the drying technology is discussed, including the addition of drying processing additives, changes in drying parameters and the effect of innovative technological means.

Technological advances in protein extraction, structure improvement and assembly, digestibility and bioavailability of plant-based foods

Plant-based foods are being considered seriously to replace traditional animal-origin foods for various reasons. It is well known that animals release large amounts of greenhouse gases into the environment during feeding, and eating animal-origin foods may also cause some health problems. Moreover, animal resources will likely be in short supply as the world population grows. It is highly likely that serious health problems ascribed to insufficient protein intake in some areas of the world will occur. Studies have shown that environmentally friendly, abundant, and customizable plant-based foods can be an effective alternative to animal-based foods. However, currently, available plant-based foods lack nutrients unique to animal-based foods. Innovative processing technologies are needed to improve the nutritional value and functionality of plant-based foods and make them acceptable to a wider range of consumers. Therefore, protein extraction technologies (e.g., high-pressure extraction, ultrasound extraction, enzyme extraction, etc.), structure improvement and assembly technologies (3D printing, micro-encapsulation, etc.), and technologies to improve digestibility and utilization of bioactive substances (microbial fermentation, physical, etc.) in the field of plant-based foods processing are reviewed. The challenges of plant-based food processing technologies are summarized. The advanced technologies aim to help the food industry solve production problems using efficient, environmentally friendly, and economical processing technologies and to guide the development of plant-based foods in the future.

Low-cost zeolitic carriers for delivery of hydroxychloroquine immunomodulatory agent with antiviral activity

The coronavirus pandemic prompted scientists to look for active pharmaceutical ingredients that could be effective in treating COVID-19. One of them was hydroxychloroquine, an antimalarial and immunomodulatory agent exhibiting antiviral activity. The anchoring of this drug on porous carriers enables control of its delivery to a specific place in the body, and thus increases bioavailability. In this work, we developed low-cost zeolitic platforms for hydroxychloroquine. The waste solution generated during zeolite production from fly ashes was used in the synthesis of Na-A and Na-X carriers at laboratory and technical scale. The materials were characterized by high purity and single mineral phase composition. The surface charge of zeolites varied from negative at pH 5.8, and 7.2, to positive at pH 1.2. All samples indicated good sorption ability towards hydroxychloroquine. The mechanism of drug adsorption was based on electrostatic interactions and followed the Freundlich model. Zeolitic carriers modified the hydroxychloroquine release profiles at conditions mimicking the pH of body fluids. The mode of drug liberation was affected by particle size distributions, morphological forms, and chemical compositions of zeolites. The most hydroxychloroquine controlled release at pH 5.8 for the Na-X material was noted, which indicates that it can enhance the drug therapeutic efficacy.

Nanofibrils of food-grade proteins: Formation mechanism, delivery systems, and application evaluation

Due to the high aspect ratio, appealing mechanical characteristics, and various adjustable functional groups on the surface proteins, food-grade protein nanofibrils have attracted great research interest in the field of food science. Fibrillation, known as a process of peptide self-assembly, is recognized as a common attribute for food-grade proteins. Converting food-grade proteins into nanofibrils is a promising strategy to broaden their functionality and applications, such as improvement of the properties of gelling and emulsifying, especially for constructing various delivery systems for bioactive compounds. Protein source and processing conditions have a great impact on the size, structure, and morphology of nanofibrils, resulting in extreme differences in functionality. With this feature, it is possible to engineer nanofibrils into four different delivery systems, including gels, microcapsules, emulsions, and complexes. Construction of nanofibril-based gels via multiple cross-linking methods can endow gels with special network structures to efficiently capture bioactive compounds and extra mechanical behavior. The adsorption behavior of nanofibrils at the interface is highly complex due to the influence of several intrinsic factors, which makes it challenging to form stabilized nanofibril-based emulsion systems. Based on electrostatic interactions, microcapsules and complexes prepared using nanofibrils and polysaccharides have combined functional properties, resulting in adjustable release behavior and higher encapsulation efficiency. The bioactive compounds delivery system based on nanofibrils is a potential solution to enhance their absorption in the gastrointestinal tract, improve their bioavailability, and deliver them to target organs. Although food-grade protein nanofibrils show unknown toxicity to humans, further research can contribute to broadening the application of nanofibrils in delivery systems.

New Perspective on Natural Plant Protein-Based Nanocarriers for Bioactive Ingredients Delivery

The health effects of bioactive substances in the human body are affected by several factors, including food processing conditions, storage conditions, light and heat, among others. These factors greatly limit the stability and bioavailability of bioactive substances. These problems can be solved by a novel protein-based nanocarrier technology, which has the excellent potential to enhance solubility, bioavailability, and the controlled release of bioactive substances. In addition, plant protein has the advantages of economy, environmental protection, and high nutrition compared to animal protein. In this review, the preparation, characterization, and application of plant protein-based nanocarriers are summarized. The research deficiency and future prospects of plant protein nanocarriers are emphasized.

Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations

The first marketed example of the application of microcapsules dates back to 1957. Since then, microencapsulation techniques and knowledge have progressed in a plethora of technological fields, and efforts have been directed toward the design of progressively more efficient carriers. The protection of payloads from the exposure to unfavorable environments indeed grants enhanced efficacy, safety, and stability of encapsulated species while allowing for a fine tuning of their release profile and longer lasting beneficial effects. Perfumes or, more generally, active-loaded microcapsules are nowadays present in a very large number of consumer products. Commercial products currently make use of rigid, stable polymer-based microcapsules with excellent release properties. However, this type of microcapsules does not meet certain sustainability requirements such as biocompatibility and biodegradability: the leaking via wastewater contributes to the alarming phenomenon of microplastic pollution with about 4% of total microplastic in the environment. Therefore, there is a need to address new issues which have been emerging in relation to the poor environmental profile of such materials. The progresses in some of the main application fields of microencapsulation, such as household care, toiletries, cosmetics, food, and pesticides are reviewed herein. The main technologies employed in microcapsules production and the mechanisms underlying the release of actives are also discussed. Both the advantages and disadvantages of every technique have been considered to allow a careful choice of the most suitable technique for a specific target application and prepare the ground for novel ideas and approaches for encapsulation strategies that we expect to be proposed within the next years.

Utilization of diverse protein sources for the development of protein-based nanostructures as bioactive carrier systems: A review of recent research findings (2010-2021)

Consumer awareness of the relationship between health and nutrition has caused a substantial increase in the demand for nutraceuticals and functional foods containing bioactive compounds (BACs) with potential health benefits. However, the direct incorporation of many BACs into commercial food and beverage products is challenging because of their poor matrix compatibility, chemical instability, low bioavailability, or adverse impact on food quality. Advanced encapsulation technologies are therefore being employed to overcome these problems. In this article, we focus on the utilization of plant and animal derived proteins to fabricate micro and nano-particles that can be used for the oral delivery of BACs such as omega-3 oils, vitamins and nutraceuticals. This review comprehensively discusses different methods being implemented for fabrications of protein-based delivery vehicles, types of proteins used, and their compatibility for the purpose. Finally, some of the challenges and limitations of different protein matrices for encapsulation of BACs are deliberated upon. Various approaches have been developed for the fabrication of protein-based microparticles and nanoparticles, including injection-gelation, controlled denaturation, and antisolvent precipitation methods. These methods can be used to construct particle-based delivery systems with different compositions, sizes, surface hydrophobicity, and electrical characteristics, thereby enabling them to be used in a wide range of applications.

Advances of plant-based structured food delivery systems on the in vitro digestibility of bioactive compounds

Food researchers are currently showing a growing interest in in vitro digestibility studies due to their importance for obtaining food products with health benefits and ensuring a balanced nutrient intake. Various bioactive food compounds are sensitive to the digestion process, which results in a lower bioavailability in the gut. The main objective of structured food delivery systems is to promote the controlled release of these compounds at the desired time/place, in addition to protecting them during digestion processes. This review provides an overview of the influence of structured delivery systems on the in vitro digestive behavior. The main delivery systems are summarized, the pros and cons of different structures are outlined, and examples of several studies that optimized the use of these structured systems are provided. In addition, we have reviewed the use of plant-based systems, which have been of interest to food researchers and the food industry because of their health benefits, improved sustainability as well as being an alternative for vegetarian, vegan and consumers suffering from food allergies. In this context, the review provides new insights and comprehensive knowledge regarding the influence of plant-based structured systems on the digestibility of encapsulated compounds and proteins/polysaccharides used in the encapsulation process.

Preparation and characterization of soybean protein isolate/pectin-based phytosterol nanodispersions and their stability in simulated digestion

In this study, stigmasterol was nanoencapsulated in soy protein isolate -pectin-based nanodispersions. Based on the particle size and zeta-potential, the optimal pectin/SPI ratio of stigmasterol nanodispersion was determined to be 1:10. At this ratio, nanodispersions was manufactured with an average particle size of 477 ± 33 nm, an encapsulation efficiency of 89.37%, and a loading amount of 17.87%. The physical properties and morphology of the nanodispersion were investigated. Fourier transform infrared spectroscopy and differential scanning calorimetry analysis revealed that stigmasterol was loaded in nanodispersions successfully. The pectin, which was used to stable nanodispersion, could restrict the release of stigmasterol in the simulated gastric fluid. This experiment indicated that the presence of pectin can improve the stability of the nanodispersion and can be used to achieve controlled release of bioactive compounds.

Proteins from leguminous plants: from structure, property to the function in encapsulation/binding and delivery of bioactive compounds

Leguminous proteins are important nutritional components in leguminous plants, and they have different structures and functions depending on their sources. Due to their specific structures and physicochemical properties, leguminous proteins have received much attention in food and nutritional applications, and they can be applied as various carriers for binding/encapsulation and delivery of food bioactive compounds. In this review, we systematically summarize the different structures and functional properties of several leguminous proteins which can be classified as ferritin, trypsin inhibitor, β-conglycinin, glycinin, and various leguminous proteins isolates. Moreover, we review the development of leguminous proteins as carriers of food bioactive compounds, and emphasize the functions of leguminous protein-based binding/encapsulation and delivery in overcoming the low bioavailability, instability and low absorption efficiency of food bioactive compounds. The limitations and challenges of the utilization of leguminous proteins as carriers of food bioactive compounds are also discussed. Possible approaches to resolve the limitations of applying leguminous proteins such as instability of proteins and poor absorption of bioactive compounds are recommended.

Investigation of food microstructure and texture using atomic force microscopy: A review

We review recent applications of atomic force microscopy (AFM) to characterize microstructural and textural properties of food materials. Based on interaction between probe and sample, AFM can image in three dimensions with nanoscale resolution especially in the vertical orientation. When the scanning probe is used as an indenter, mechanical features such as stiffness and elasticity can be analyzed. The linkage between structure and texture can thus be elucidated, providing the basis for many further future applications of AFM. Microstructure of simple systems such as polysaccharides, proteins, or lipids separately, as characterized by AFM, is discussed. Interaction of component mixtures gives rise to novel properties in complex food systems due to development of structure. AFM has been used to explore the morphological characteristics of such complexes and to investigate the effect of such characteristics on properties. Based on insights from such investigations, development of food products and manufacturing can be facilitated. Mechanical analysis is often carried out to evaluate the suitability of natural or artificial materials in food formulations. The textural properties of cellular tissues, food colloids, and biodegradable films can all be explored at nanometer scale, leading to the potential to connect texture to this fine structural level. More profound understanding of natural food materials will enable new classes of fabricated food products to be developed.

Modeling the release of food bioactive ingredients from carriers/nanocarriers by the empirical, semiempirical, and mechanistic models

The encapsulation process has been utilized in the field of food technology to enhance the technofunctional properties of food products and the delivery of nutraceutical ingredients via food into the human body. The latter application is very similar to drug delivery systems. The inherent sophisticated nature of release mechanisms requires the utilization of mathematical equations and statistics to predict the release behavior during the time. The science of mathematical modeling of controlled release has gained a tremendous advancement in drug delivery in recent years. Many of these modeling methods could be transferred to food. In order to develop and design enhanced food controlled/targeted bioactive release systems, understanding of the underlying physiological and chemical processes, mechanisms, and principles of release and applying the knowledge gained in the pharmaceutical field to food products is a big challenge. Ideally, by using an appropriate mathematical model, the formulation parameters could be predicted to achieve a specific release behavior. So, designing new products could be optimized. Many papers are dealing with encapsulation approaches and evaluation of the impact of process and the utilized system on release characteristics of encapsulated food bioactives, but still, there is no deep insight into the mathematical release modeling of encapsulated food materials. In this study, information gained from the pharmaceutical field is collected and discussed to investigate the probable application in the food industry.

Formation of soy protein isolate (SPI)-citrus pectin (CP) electrostatic complexes under a high-intensity ultrasonic field: Linking the enhanced emulsifying properties to physicochemical and structural properties

In this study, a high-intensity ultrasonic field was applied to the electrostatic interactions between soy protein isolate (SPI) and citrus pectin (CP). The emulsifying properties of SPI-CP soluble complexes formed under different ultrasound powers and durations were investigated and peaked at 630 W for 10 min. Micrographs of emulsions revealed that ultrasound-treated complexes generated a more homogeneous emulsion with significantly reduced and uniformly-distributed droplet sizes. To better understand the mechanism for the improved emulsifying properties, the physicochemical and structural properties of the SPI-CP complexes at pH 3.5 with and without ultrasound treatment were investigated. It was revealed that ultrasound increased the absolute values of the zeta potential and surface hydrophobicity of complexes, but significantly decreased their particle sizes, fluorescence intensity and turbidity. Results indicated that cavitation effects resulted in structural modifications in both biomacromolecules, as well as enhanced the electrostatic interactions between SPI and CP, which in combination contributed to the more desirable emulsifying properties of the complex.

Food protein amyloid fibrils: Origin, structure, formation, characterization, applications and health implications

Amyloid fibrils have traditionally been considered only as pathological aggregates in human neurodegenerative diseases, but it is increasingly becoming clear that the propensity to form amyloid fibrils is a generic property for all proteins, including food proteins. Differently from the pathological amyloid fibrils, those derived from food proteins can be used as advanced materials in biomedicine, tissue engineering, environmental science, nanotechnology, material science as well as in food science, owing to a combination of highly desirable feature such as extreme aspect ratios, outstanding stiffness and a broad availability of functional groups on their surfaces. In food science, protein fibrillization is progressively recognized as an appealing strategy to broaden and improve food protein functionality. This review article discusses the various classes of reported food protein amyloid fibrils and their formation conditions. It furthermore considers amyloid fibrils in a broad context, from their structural characterization to their forming mechanisms and ensued physical properties, emphasizing their applications in food-related fields. Finally, the biological fate and the potential toxicity mechanisms of food amyloid fibrils are discussed, and an experimental protocol for their health safety validation is proposed in the concluding part of the review.

Microencapsulação e liberação controlada por difusão de ingredientes alimentícios produzidos através da secagem por atomização: revisão

Resumo A utilização de ingredientes microencapsulados na indústria alimentícia apresenta crescente expansão. A microencapsulação é utilizada para proteger o material ativo de condições adversas e apresenta ainda mais vantagens quando utilizada juntamente com a liberação controlada. O uso da atomização para microencapsulação é uma das técnicas mais utilizadas devido ao seu baixo custo e facilidade de aplicação. Esta revisão descreve a produção de micropartículas contendo ingredientes alimentícios através da secagem por atomização e discute a liberação controlada do material ativo das micropartículas pelo mecanismo de difusão e modelos cinéticos.

Effect of Antibacterial Plant Extracts on the Morphology of Electrospun Poly(Lactic Acid) Fibres

Essential oils (EOs) of clary sage and black pepper induce changes in the morphology of poly(lactic acid) (PLA) electrospun fibres. The chemical composition of the oils is analysed by gas chromatography-mass spectrometry and Fourier-transform infrared spectroscopy; while the evaporation rate of the EOs and their main chemical components is characterised by Thermogravimetric Analysis. The addition of EOs generate thermodynamic instabilities during the electrospinning process, leading to the formation of fibres with either wrinkled (for clary sage oil) or nano-textured surfaces (for black pepper oil). The morphology of the PLA-EOs fibres is investigated by Scanning Electron Microscopy. Together with a well-defined structure, the fibres produced also possess antibacterial activity, as demonstrated by viability loss tests conducted on E. coli and S. epidermidis. Bacteria inactivation efficiency of 76 and 100% is reported for the composite PLA/essential oils electrospun mats. The composite mats produced are promising in the biomedical field, where nanotopography offers physical cues to regulate cell behaviour, and the delivery of therapeutic compounds (essential oils) limits microbial growth.

Layer-by-layer assembled biopolymer microcapsule with separate layer cavities generated by gas-liquid microfluidic approach

In this work, a layer-by-layer (LbL) assembled biopolymer microcapsule with separate layer cavities is generated by a novel and convenient gas-liquid microfluidic approach. This approach exhibits combined advantages of microfluidic approach and LbL assembly method, and it can straightforwardly build LbL-assembled capsules in mild aqueous environments at room temperature. In particular, using this approach we can build the polyelectrolyte multilayer capsule with favorable cavities in each layer, and without the need for organic solvent, emulsifying agent, or sacrificial template. Various components (e.g., drugs, proteins, fluorescent dyes, and nanoparticles) can be respectively encapsulated in the separate layer cavities of the LbL-assembled capsules. Moreover, the encapsulated capsules present the ability as colorimetric sensors, and they also exhibit the interesting release behavior. Therefore, the LbL-assembled biopolymer capsule is a promising candidate for biomedical applications in targeted delivery, controlled release, and bio-detection.