Utilizing dextran to improve hemocompatibility of antimicrobial wound dressings with embedded quaternary ammonium salts

An injectable sequential dual-crosslinking catechol-functionalized hyaluronic acid hydrogel for enhanced regeneration of full-thickness burn injury

Severe burn injuries with massive dermal loss are often underestimated despite their significant impact on morbidity and mortality. Resembling the natural extracellular matrix (ECM), hyaluronic acid (HA)-based dressings have been extensively explored as suitable candidates for burn wound treatment. However, native HA hydrogel's limitations, such as low mechanical strength, rapid degradation, and uncontrollable drug delivery, hinder its efficacy, especially for full-thickness burns requiring injectable hydrogels with robust antibacterial and angiogenic capabilities. Herein, we present a novel multifunctional sequential dual-curing hydrogel system, combining hyperbranched poly(DMA-DMAPMA-PEGDA) (DDP) polymer with thiolated hyaluronic acid (HA-SH). The DDP copolymer, featuring multi-vinyls and catechol functionalities, facilitates two curing reactions taking place sequentially with HA-SH under physiological conditions, balancing convenient injection with the mechanical strength essential for effective wound management. Furthermore, the resulting DDP/HA hydrogels demonstrate enhanced therapeutic attributes, including intrinsic angiogenic and antimicrobial effects, setting them as promising dressing options for deep burn wound therapy.

Amide Modification of Glycolipid Biosurfactants as Promising Biocompatible Antibacterial Agents

Discovering new antibacterial agents is crucial to addressing the increasing risk of bacterial infections induced by antimicrobial resistance in food and agricultural industries. Here, biocompatible acidic-type sophorolipids (ASLs) and glucolipids (GLs) prepared via chemical modification of natural sophorolipids from fermentation were functionalized via amide modification for use as potential antibacterial agents. It was found that the arginine methyl ester derivative of GLs (GLs-d-Arg-OMe) showed excellent antibacterial activity, killing more than 99.99% of Escherichia coli at 200 mg/L. The sterilization dosage of the GLs against Bacillus subtilis, Bacillus cereus, and Staphylococcus aureus was 16-64 mg/L, in contrast to 32-64 mg/L for the fungus Candida albicans. In particular, GLs-d-Arg-OMe showed the best biocompatibility with a therapeutic index of up to 18. It was shown that amide modification of glycolipids can effectively improve antibacterial activity while maintaining biocompatibility, which can be exploited for the development of novel antibiotics in food and agricultural fields.

Recent advances in nanopore-based analysis for carbohydrates and glycoconjugates

Saccharides are not only the basic constituents and nutrients of living organisms, but also participate in various life activities, and play important roles in cell recognition, immune regulation, development, cancer, etc. The analysis of carbohydrates and glycoconjugates is a necessary means to study their transformations and physiological roles in living organisms. Existing detection techniques can hardly meet the requirements for the analysis of carbohydrates and glycoconjugates in complex matrices as they are expensive, involve complex derivatization, and are time-consuming. Nanopore sensing technology, which is amplification-free and label-free, and is a high-throughput process, provides a new solution for the identification and sequencing of carbohydrates and glycoconjugates. This review highlights recent advances in novel nanopore-based single-molecule sensing technologies for the detection of carbohydrates and glycoconjugates and discusses the advantages and challenges of nanopore sensing technologies. Finally, current issues and future perspectives are discussed with the aim of improving the performance of nanopores in complex media diagnostic applications, as well as providing a new direction for the quantification of glycan chains and the study of glycan chain properties and functions.

Exploring polysaccharide-based bio-adhesive topical film as a potential platform for wound dressing application: A review

Wound dressings act as a physical barrier between the wound site and the external environment, preventing additional harm; choosing suitable wound dressings is essential for the healing process. Polysaccharide biopolymers have demonstrated encouraging findings and therapeutic prospects in recent decades about wound therapy. Additionally, polysaccharides have bioactive qualities like anti-inflammatory, antibacterial, and antioxidant capabilities that can help the process of healing. Due to their excellent tissue adhesion, swelling, water absorption, bactericidal, and immune-regulating properties, polysaccharide-based bio-adhesive films have recently been investigated as intriguing alternatives in wound management. These films also mimic the structure of the skin and stimulate the regeneration of the skin. This review presented several design standards and functions of suitable bio-adhesive films for the healing of wounds. Additionally, the most recent developments in the use of bio-adhesive films as wound dressings based on polysaccharides, including hyaluronic acid, chondroitin sulfate, dextran, alginate, chitosan, cellulose, konjac glucomannan, gellan gum, xanthan gum, pectin, guar gum, heparin, arabinogalactans, carrageen, and tragacanth gum, are thoroughly discussed. Lastly, to create a road map for the function of polysaccharide-based bio-adhesive films in advanced wound care, their clinical performances and future challenges in making bio-adhesive films by three-dimensional bioprinting are summarized.

Pectin wrapped halloysite nanotube reinforced Polycaprolactone films for potential wound healing application

The current research work focuses on preparing the polycaprolactone (PCL) based nanocomposite films embedded with surface modified Halloysite Nanotube (HNT). The avenue of the study is to unravel the applicability of polymer nanocomposites for wound healing. The flexible property of HNT was taken as the major force to accomplish the addition of biopolymer pectin onto its surface. Functionalization of HNT with pectin has certainly enhanced its binding nature with the polymer. The PCL nanocomposite films were characterized by several promising techniques such as FTIR, XRD, DSC-TGA, FESEM, TEM, AFM, and mechanical properties were too examined along. When compared to the plane PCL film, the nanocomposite films manifested favorable results in terms of mechanical and chemical properties. Additionally, biometric studies such as in-vitro swelling, enzymatic degradation, and hemolysis performed on the films gave extremely good results. The haemolytic percentage recorded for the films exhibited a steady decrease with increasing amount of nanofillers. The MTT assay showed cell proliferation and its increase as the embedded HNT is more in the matrix. Wound closure study performed on NIH3T3 cell line with 1, 3 and 5wt% of films has given a strong proof for the involvement of polymer and HNT in the healing procedure.

Sustainable Janus lignin-based polyurethane biofoams with robust antibacterial activity and long-term biofilm resistance

Conventional antibiotic therapies have been becoming less efficient due to increasingly, and sometimes fully, antibiotic-resistant bacterial strains, sometimes known as "superbacteria" or "superbugs." Thus, novel antibacterial materials to effectively inhibit or kill bacteria are crucial for humanity. As a broad-spectrum antimicrobial agent, silver nanoparticles (Ag NPs) have been the most widely commercialized of biomedical materials. However, long-term use of significant amounts of Ag NPs can be potentially harmful to human health through a condition known as argyria, in addition to being toxic to many environmental systems. It is, thus, highly necessary to reduce the amount of Ag NPs employed in medical treatments while also ensuring maintenance of antimicrobial properties, in addition to reducing the overall cost of treatment for humanitarian utilization. For this purpose, naturally sourced antimicrobial polylysine (PL) is used to partially replace Ag NPs within the materials composition. Accordingly, a series of PL, Ag NPs, and lignin-based polyurethane (LPU) composite biofoams (LPU-PL-Ag) were prepared. These proposed composite biofoams, containing at most only 2 % PL and 0.03 % Ag NPs, significantly inhibited the growth of both Gram-positive and Gram-negative bacteria within 1 h and caused irreversibly destructive bactericidal effects. Additionally, with a layer of polydimethylsiloxane (PDMS) on the surface, PDMS-LPU-PL(2 %)-Ag(0.03 %) can effectively prevent bacterial adhesion with a clearance rate of about 70 % for both bacterial biofilms within three days and a growth rate of more than 80 % for mouse fibroblasts NIH 3 T3. These lignin-based polyurethane biofoam dressings, with shorter antiseptic sterilization times and broad-spectrum antibacterial effects, are extremely advantageous for infected wound treatment and healing in clinical use.

An Advanced Review: Polyurethane-Related Dressings for Skin Wound Repair

The inability of wounds to heal effectively through normal repair has become a burden that seriously affects socio-economic development and human health. The therapy of acute and chronic skin wounds still poses great clinical difficulty due to the lack of suitable functional wound dressings. It has been found that dressings made of polyurethane exhibit excellent and diverse biological properties, but lack the functionality of clinical needs, and most dressings are unable to dynamically adapt to microenvironmental changes during the healing process at different stages of chronic wounds. Therefore, the development of multifunctional polyurethane composite materials has become a hot topic of research. This review describes the changes in physicochemical and biological properties caused by the incorporation of different polymers and fillers into polyurethane dressings and describes their applications in wound repair and regeneration. We listed several polymers, mainly including natural-based polymers (e.g., collagen, chitosan, and hyaluronic acid), synthetic-based polymers (e.g., polyethylene glycol, polyvinyl alcohol, and polyacrylamide), and some other active ingredients (e.g., LL37 peptide, platelet lysate, and exosomes). In addition to an introduction to the design and application of polyurethane-related dressings, we discuss the conversion and use of advanced functional dressings for applications, as well as future directions for development, providing reference for the development and new applications of novel polyurethane dressings.

Bacterial cellulose: Biopolymer with novel medical applications

Due to the growing importance of green chemistry, the search for alternatives to cellulose has begun, leading to the rediscovery of bacterial cellulose (BC). The material is produced by Gluconacetobacter and Acetobacter bacteria, mainly Komagataeibacter xylinus. It is a pure biopolymer, without lignin or hemicellulose, forming a three-dimensional mesh, showing much lower organization than its plant counterpart. Thanks to its design, it has proven itself in completely unprecedented applications - especially in the field of biomedical sciences. Coming in countless forms, it has found use in applications such as wound dressings, drug delivery systems, or tissue engineering. The review article focuses on discussing the main structural differences between plant and bacterial cellulose, methods of bacterial cellulose synthesis, and the latest trends in BC applications in biomedical sciences.

Dialdehyde Cellulose Solution as Reducing Agent: Preparation of Uniform Silver Nanoparticles and In Situ Synthesis of Antibacterial Composite Films with High Barrier Properties

The demand for antimicrobial materials is gradually increasing due to the threat of infections and diseases caused by microorganisms. Silver nanoparticles (AgNPs) are widely used because of their broad-spectrum antimicrobial properties, but their synthesis methods are often environmentally harmful and AgNPs difficult to isolate, which limits their application in several fields. In this study, an aqueous solution of dialdehyde cellulose (DAC) was prepared and used as a reducing agent to synthesize AgNPs in an efficient and environmentally friendly process. The synthesized AgNPs can be easily separated from the reducing agent to expand their applications. In addition, the AgNPs were immobilized in situ on dialdehyde cellulose to form antibacterial composite films. The results showed that the prepared silver nanoparticles were mainly spherical and uniformly dispersed, with an average size of about 25 nm under optimal conditions. Moreover, the dialdehyde cellulose–nanosilver (DAC@Ag) composite films had excellent mechanical properties, positive transparency, ultraviolet-blocking properties, and effective antibacterial activity against E. coli and S. aureus. Notably, the composite films exhibited excellent oxygen and water vapor barrier properties, with WVT and ORT of 136.41 g/m2·24 h (30 °C, 75% RH) and <0.02 cm3/m2·24 h·0.1 MPa (30 °C, 75% RH), respectively, better than commercial PE films. Hence, this study not only provides an environmentally friendly method for the preparation of silver nanoparticles, but also offers a simple and novel strategy for the in situ synthesis of silver-loaded antibacterial composite films.

Self-Healing Hydrogels Fabricated by Introducing Antibacterial Long-Chain Alkyl Quaternary Ammonium Salt into Marine-Derived Polysaccharides for Wound Healing

The development of hydrogels as wound dressings has gained considerable attention due to their promising ability to promote wound healing. However, in many cases of clinical relevance, repeated bacterial infection, which might obstruct wound healing, usually occurs due to the lack of antibacterial properties of these hydrogels. In this study, we fabricated a new class of self-healing hydrogel with enhanced antibacterial properties based on dodecyl quaternary ammonium salt (Q12)-modified carboxymethyl chitosan (Q12-CMC), aldehyde group- modified sodium alginate (ASA), Fe3+ via Schiff bases and coordination bonds (QAF hydrogels). The dynamic Schiff bases and coordination interactions conferred excellent self-healing abilities to the hydrogels, while the incorporation of dodecyl quaternary ammonium salt gave the hydrogels superior antibacterial properties. Additionally, the hydrogels displayed ideal hemocompatibility and cytocompatibility, crucial for wound healing. Our full-thickness skin wound studies demonstrated that QAF hydrogels could result in rapid wound healing with reduced inflammatory response, increased collagen disposition and improved vascularization. We anticipate that the proposed hydrogels, possessing both antibacterial and self-healing properties, will emerge as a highly desirable material for skin wound repair.

From Antibacterial to Antibiofilm Targeting: An Emerging Paradigm Shift in the Development of Quaternary Ammonium Compounds (QACs)

In a previous development stage, mostly individual antibacterial activity was a target in the optimization of biologically active compounds and antiseptic agents. Although this targeting is still valuable, a new trend has appeared since the discovery of superhigh resistance of bacterial cells upon their aggregation into groups. Indeed, it is now well established that the great majority of pathogenic germs are found in the environment as surface-associated microbial communities called biofilms. The protective properties of biofilms and microbial resistance, even to high concentrations of biocides, cause many chronic infections in medical settings and lead to serious economic losses in various areas. A paradigm shift from individual bacterial targeting to also affecting more complex cellular frameworks is taking place and involves multiple strategies for combating biofilms with compounds that are effective at different stages of microbiome formation. Quaternary ammonium compounds (QACs) play a key role in many of these treatments and prophylactic techniques on the basis of both the use of individual antibacterial agents and combination technologies. In this review, we summarize the literature data on the effectiveness of using commercially available and newly synthesized QACs, as well as synergistic treatment techniques based on them. As an important focus, techniques for developing and applying antimicrobial coatings that prevent the formation of biofilms on various surfaces over time are discussed. The information analyzed in this review will be useful to researchers and engineers working in many fields, including the development of a new generation of applied materials; understanding biofilm surface growth; and conducting research in medical, pharmaceutical, and materials sciences. Although regular studies of antibacterial activity are still widely conducted, a promising new trend is also to evaluate antibiofilm activity in a comprehensive study in order to meet the current requirements for the development of highly needed practical applications.

Introducing Semi-Interpenetrating Networks of Chitosan and Ammonium-Quaternary Polymers for the Effective Removal of Waterborne Pathogens from Wastewaters

The present work aims to study the influence of ammonium-quaternary monomers and chitosan, obtained from different sources, upon the effect of semi-interpenetrating polymer network (semi-IPN) hydrogels upon the removal of waterborne pathogens and bacteria from wastewater. To this end, the study was focused on using vinyl benzyl trimethylammonium chloride (VBTAC), a water-soluble monomer with known antibacterial properties, and mineral-enriched chitosan extracted from shrimp shells, to prepare the semi-IPNs. By using chitosan, which still contains the native minerals (mainly calcium carbonate), the study intends to justify that the stability and efficiency of the semi-IPN bactericidal devices can be modified and better improved. The new semi-IPNs were characterized for composition, thermal stability and morphology using well-known methods. Swelling degree (SD%) and the bactericidal effect assessed using molecular methods revealed that hydrogels made of chitosan derived from shrimp shell demonstrated the most competitive and promising potential for wastewater (WW) treatment.

Quaternary Ammonium Salts: Insights into Synthesis and New Directions in Antibacterial Applications

The overuse of antibiotics has led to the emergence of a large number of antibiotic-resistant genes in bacteria, and increasing evidence indicates that a fungicide with an antibacterial mechanism different from that of antibiotics is needed. Quaternary ammonium salts (QASs) are a biparental substance with good antibacterial properties that kills bacteria through simple electrostatic adsorption and insertion into cell membranes/altering of cell membrane permeability. Therefore, the probability of bacteria developing drug resistance is greatly reduced. In this review, we focus on the synthesis and application of single-chain QASs, double-chain QASs, heterocyclic QASs, and gemini QASs (GQASs). Some possible structure-function relationships of QASs are also summarized. As such, we hope this review will provide insight for researchers to explore more applications of QASs in the field of antimicrobials with the aim of developing systems for clinical applications.

A universal coating strategy for inhibiting the growth of bacteria on materials surfaces

The development of a versatile antibacterial coating, irrespective of material characteristics, is greatly attractive but still a challenge. In this work, mussel-inspired dopamine-modified sodium alginate (SA-DA) was successfully synthesized as the adhesion layer, and antibacterial coatings on three types of substrates, namely cotton fabric, aluminum sheet, and polyurethane membrane, were constructed through the layer-by-layer (LbL) deposition of polyhexamethylene guanidine and sodium alginate. Among the coated materials, the coated cotton fabric was systematically characterized, and the results showed that it still exhibited ideal hydrophilicity, and its liquid absorption capacity increased with an increase in the coating layers. The growth of Escherichia coli and Staphylococcus aureus was notably inhibited on the coated cotton fabric, and 10 coating bilayers achieved 100% inhibition of bacterial growth within 10 min. Furthermore, an ideal antibacterial ability maintained after 10 cycles of antibacterial trials or 50 washing or soaping cycles. In vitro evaluation of the hemostatic effect indicated that the coated cotton fabric could promote blood clotting by concentrating the components of blood and activating the platelets, and no significant hemolysis and cytotoxicity were observed in the coated cotton fabric. Moreover, the coated aluminum and polyurethane film also displayed an obvious antibacterial effect, which proved that the constructed coating could successfully adhere to the metal and polymer surfaces. Therefore, this work provided a proper way for the progress of a current antibacterial coating tactics for different substrate surfaces.

Bio-inspired hemocompatible surface modifications for biomedical applications

When blood first encounters the artificial surface of a medical device, a complex series of biochemical reactions is triggered, potentially resulting in clinical complications such as embolism/occlusion, inflammation, or device failure. Preventing thrombus formation on the surface of blood-contacting devices is crucial for maintaining device functionality and patient safety. As the number of patients reliant on blood-contacting devices continues to grow, minimizing the risk associated with these devices is vital towards lowering healthcare-associated morbidity and mortality. The current standard clinical practice primarily requires the systemic administration of anticoagulants such as heparin, which can result in serious complications such as post-operative bleeding and heparin-induced thrombocytopenia (HIT). Due to these complications, the administration of antithrombotic agents remains one of the leading causes of clinical drug-related deaths. To reduce the side effects spurred by systemic anticoagulation, researchers have been inspired by the hemocompatibility exhibited by natural phenomena, and thus have begun developing medical-grade surfaces which aim to exhibit total hemocompatibility via biomimicry. This review paper aims to address different bio-inspired surface modifications that increase hemocompatibility, discuss the limitations of each method, and explore the future direction for hemocompatible surface research.

Polyhexamethylene guanidine hydrochloride modified sodium alginate nonwoven with potent antibacterial and hemostatic properties for infected full-thickness wound healing

The development of multifunctional wound dressings has always been considered as a promising strategy to promote blood coagulation, inhibit bacterial infection, and accelerate wound healing. Herein, an antibacterial and hemostatic dressing (SA-PHMG) was developed based on sodium alginate (SA) nonwoven and polyhexamethylene guanidine hydrochloride (PHMG) through a completely green industrial route, including dipping, padding, and drying. According to studies, SA-PHMG dressings exhibited excellent liquid absorption capacity and water vapor permeability. Moreover, bactericidal assays have demonstrated that SA-PHMG dressings have ideal antibacterial activity against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and mixed bacteria, maintaining potent antibacterial activity even after 10 cycles of antibacterial trials or 50 times of washing or soaping. The in vitro evaluation of the hemostatic effect indicated that the SA-PHMG could significantly promote blood clotting by activating platelets, and in vitro and in vivo hemolysis, cytotoxicity and skin irritation studies demonstrated the ideal biocompatibility of the dressings. In addition, better wound closure and tissue regeneration were recorded using SA-PHMG nonwoven as the dressing based on an infected full-thickness wound model. In conclusion, this antibacterial, hemostatic, biocompatible, and environmentally friendly SA-PHMG nonwoven exhibit the potential for infected wound healing.

Cationic porphyrin-based nanoparticles for photodynamic inactivation and identification of bacteria strains

The emergence of antibiotic drug resistance has undermined the efficacy of antibiotics, and is becoming a severe threat to public health. To combat antibiotic drug resistance and to replace traditional antibiotic treatment, an alternative strategy based on antibacterial photodynamic therapy (APDT), which has broad applicability, high efficiency and less potential of developing antibiotic drug resistance, has been developed. In this work, the cationic porphyrin-based nanoparticles (NPs) were prepared by epoxy-amine chain extension polymerization of diepoxy-terminated poly(ethylene glycol) (PEG) and tetraamino-containing porphyrin, followed by quaternization with methyl iodine and butyl bromide. The as-obtained cationic porphyrin NPs preserved the photophysical properties of porphyrin derivatives, and can efficiently generate singlet oxygen (¹O₂) under 635 nm laser irradiation. The cationic porphyrin-based NPs displayed intrinsic antibacterial properties, and exhibited strong APDT effect on Gram-positive bacteria by destroying the bacterial cell membranes. Upon incubation with different bacterial strains, it was found that they could be utilized to identify Gram-positive bacteria by observing the sedimentation behavior of their mixtures, and visualizing their co-cultured and centrifugal bacteria cakes. In addition, the cationic porphyrin-based NPs had good hemocompatibility and low dark cytotoxicity.

Integrating Porphyrinic Metal-Organic Frameworks in Nanofibrous Carrier for Photodynamic Antimicrobial Application

The rise and spread of antimicrobial resistance is creating an ever greater challenge in wound management. Nanofibrous membranes (NFMs) incorporated with antibiotics have been widely used to remedy bacterial wound infections owing to their versatile features. However, misuse of antibiotics has resulted in drug resistance, and it remains a significant challenge to achieve both high antibacterial efficiency and without causing bacterial resistance. Here, the ‘MOF-first’ strategy was adopted, the porphyrinic metal-organic frameworks nanoparticles (PCN−224 NPs) were pre-synthesized first, and then the composite antibacterial PCN−224 NPs @ poly (ε-caprolactone) (PM) NFMs were fabricated via a facile co-electrospinning technology. This strategy allows large amounts of effective MOFs to be integrated into nanofibers to effectively eliminate bacteria without bacterial resistance and to realize a relatively fast production rate. Upon visible light (630 nm) irradiation for 30 min, the PM−25 NFMs have the best ¹O₂ generation performance, triggering remarkable photodynamic antibacterial effects against both S. aureus, MRSA, and E. coli bacteria with survival rates of 0.13%, 1.91%, and 2.06% respectively. Considering the photodynamic antibacterial performance of the composite nanofibrous membranes functionalized by porphyrinic MOFs, this simple approach may provide a feasible way to use MOF materials and biological materials to construct wound dressing with the versatility to serve as an antibacterial strategy in order to prevent bacterial resistance.

Caffeic Acid Phenethyl Ester Loaded Electrospun Nanofibers for Wound Dressing Application

Electrospinning is an advantageous method with a wide usage area, which enables the production of materials consisting of nano-thickness fibers. In this study, caffeic acid phenethyl ester (CAPE) molecule was loaded onto the poly(lactic-co-glycolic acid) (PLGA) nanofibers and obtained nanofibers were physicochemically and biologically investigated for the first time in the literature. The existence of CAPE molecules, loaded on PLGA membranes by dropping and spraying methods, was evaluated by a comparative investigation of Fourier-transform infrared (FTIR) spectra and X-Ray diffraction (XRD) patterns. Fiber morphology of the membranes was investigated by scanning electron microscope (SEM). CAPE release and swelling behaviors of the membranes were studied in vitro. The radical scavenging activity of CAPE-loaded wound dressing materials was determined by using an antioxidant assay. The antimicrobial properties of PLGA and CAPE-loaded PLGA membranes were evaluated against S. aureus, P. aeruginosa and C. albicans strains by the time-kill method. The biocompatibility study of the obtained CAPE-loaded fibers conducted on human fibroblast cell line and wound healing promoting effect of the fibers was investigated in vitro scratch assay. The results show that CAPE-loaded PLGA membranes are highly antimicrobial against all strains used in the experiment. Additionally, the results show that they are biocompatible and have wound healing properties on human fibroblasts.

Development of N,O-Carboxymethyl Chitosan-Starch Biomaterial Inks for 3D Printed Wound Dressing Applications

In this paper, a novel hybrid biomaterial ink consisting of two water-soluble polymers is investigated: starch and N,O-carboxymethyl chitosan (NOCC). The biomaterial ink is used to fabricate controlled release biodegradable wound dressing scaffolds via a novel low-temperature solvent (organic)-free 3D printing technique. NOCC is a variant of chitosan with a high degradation rate that can lead to an immediate release of the drugs, and starch, on the other hand, is used to alter degradation and drug release characteristics of the biomaterial. Mupirocin, a topical anti-infective, is incorporated into the biomaterial inks. Different biomaterial inks in terms of NOCC to starch ratio are prepared and characterized. Printability and rheology of the samples are investigated, and the release of mupirocin over time is quantified. The efficacy of the developed 3D printed wound dressings against Staphylococcus aureus is examined through disk diffusion assays. Increasing NOCC accelerated the release of the drug from the scaffold and led to larger zones of inhibition in the early hours of the in vitro tests; this phenomenon is correlated to the enhanced hydrophilicity of NOCC-dominated scaffolds. The drug release and the zone of inhibition are controlled by altering starch to NOCC ratio in the biomaterial ink.

Antibacterial and Biocompatible Hydrogel Dressing Based on Gelatin- and Castor-Oil-Derived Biocidal Agent

Favored antibacterial activity associated with excellent biocompatibility, mechanical durability, and exudate handling needs to be addressed by modern dressing to achieve the desired wound healing. This paper deals with developing a new green and facile approach to manufacturing nonleachable antibacterial gelatin-based films for wound dressing. Therefore, a reactive methoxy-silane-functionalized quaternary ammonium compound bearing a fatty amide residue originating from castor oil (Si-CAQ) was initially synthesized. The antibacterial dressings were then fabricated via sol-gel and condensation reactions of the mixture containing gelatin, Si-CAQ, (3-glycidyloxypropyl) trimethoxysilane, and poly(vinyl alcohol). By utilizing bioactive polymers as starting materials and eliminating organic solvents during the dressing preparation, desirable clinical safety could be ensured. The gelatin-based films presented appropriate mechanical properties, such as flexibility and strength, in both dried and hydrated states (tensile strength >6 MPa and elongation >100). It is due to the in situ generations of the inorganic silicon domain in the organic framework via the sol-gel cross-linking process. The prepared dressings exhibited desirable features, including excellent biocompatibility (cell viability >95%), proper wound-exudate-managing characteristics (equilibrium water contact (EWA) 280-350% and water vapor transmission rate (WVTR) 2040-2200 g/m²/day), fluid handling capacity (FHC) (3-3.35 g), as well as commendable hemocompatibility. The promising bactericidal activity of the dressing against Bacillus subtilis, methicillin-resistant Staphylococcus aureus, and Escherichia coli strains with a contact-killing efficacy of 100% could prevent infection development at the wounded area. As evaluated by the wound scratch assay, the desired fibroblast cell growth, migration, and proliferation indicated the capability of the dressing to facilitate the healing process by encouraging fibroblast cell migration to the damaged area. In vivo wound-healing results showed that the prepared biocidal dressing stimulates wound healing and enhances epithelialization, collagen maturation, and vascularization of wounds due to their antibacterial effects and accelerated cellular functions.

Favorable Antibacterial, Antibiofilm, Antiadhesion to Cells, and Biocompatible Polyurethane by Facile Surface Functionalization

It is of paramount importance to prohibit biofilm formation in a wide range of implant devices, such as thermoplastic polyurethane (PU)-based catheters. It is possible only by means of a multifunctional material that provides fast and effective antibacterial activity, proper biocompatibility, and low bacterial and cell adhesion. In this paper, a facile chemistry approach has been developed to modify biomedical-grade PU with PU species, containing reactive uretdione functional groups for functionalization with the contact-type polyguanidine bactericidal agent and oxidized dextran as an antifouling polymer without sacrificing the thermal and mechanical properties. The resulting PU possesses broad-spectrum contact-active antibacterial activity against Gram-negative and Gram-positive bacteria with fast kinetics. The excellent antifouling capacity was confirmed by low nonspecific protein adsorption and reduced adhesion of fibroblast cells by ≥ 90%. In addition to antiadhesive and antibiofilm properties, high cell viability (>90%) and low hemolysis rate (HR < 1%) verified favorable cytocompatibility. Hence, the strategy followed to functionalize PUs in this paper might be considered to modify PU-based biomedical devices.

Films of chitosan and natural modified hydroxyapatite as effective UV-protecting, biocompatible and antibacterial wound dressings

Chitosan is a natural polysaccharide widely used in biomedicine, for instance for wound dressing. Hydroxyapatite is a very bioactive calcium phosphate which, if modified with an appropriate element (iron Fe), can also have UV-absorbing properties. In this work, we report the study of films of chitosan incorporated with iron-modified hydroxyapatite of natural origin (from cod fish bones); this combination led to an innovative chitosan-based material with excellent and advanced functional properties. The films showed very high UV absorption (Ultraviolet Protection Factor (UPF) value higher than 50). This is the first time that a chitosan-based material has shown such high UV protection properties. The films also showed to be non-cytotoxic, and possessed antimicrobial activity towards both Gram-positive and negative strains. Their mechanical properties, optimised with an experimental design approach, confirmed their potential use as multifunctional wound dressing, capable of reducing bacterial infections and, at the same time, protecting from UV light.

Porous Curdlan-Based Hydrogels Modified with Copper Ions as Potential Dressings for Prevention and Management of Bacterial Wound Infection-An In Vitro Assessment

Bacterial infections at the wound site still remain a huge problem for current medicine, as they may lead to development of chronic wounds. In order to prevent such infections, there is a need to use wound dressings that possess ability to inhibit bacterial colonization. In this study, three new curdlan-based biomaterials modified with copper ions were fabricated via simple and inexpensive procedure, and their structural, physicochemical, and biological properties in vitro were evaluated. Received biomaterials possessed porous structure, had ability to absorb high amount of simulated wound fluid, and importantly, they exhibited satisfactory antibacterial properties. Nevertheless, taking into account all evaluated properties of new curdlan-based biomaterials, it seems that Cur_Cu_8% is the most promising biomaterial for management of wounds accompanied with bacterial infections. This biomaterial exhibited the best ability to reduce Escherichia coli and Staphylococcus aureus growth and moreover, it absorbed the highest amount of simulated wound fluid as well as enabled optimal water vapor transmission. Furthermore, Cur_Cu_8% biomaterial possessed the best values of selective indexes, which determine its potential safety in vitro. Thus, Cur_Cu_8% hydrogel may be considered as a promising candidate for management of infected wounds as well as it may constitute a good platform for further modifications.

Hydrogel Dressings for the Treatment of Burn Wounds: An Up-To-Date Overview

Globally, the fourth most prevalent devastating form of trauma are burn injuries. Ideal burn wound dressings are fundamental to facilitate the wound healing process and decrease pain in lower time intervals. Conventional dry dressing treatments, such as those using absorbent gauze and/or absorbent cotton, possess limited therapeutic effects and require repeated dressing changes, which further aggravate patients' suffering. Contrariwise, hydrogels represent a promising alternative to improve healing by assuring a moisture balance at the burn site. Most studies consider hydrogels as ideal candidate materials for the synthesis of wound dressings because they exhibit a three-dimensional (3D) structure, which mimics the natural extracellular matrix (ECM) of skin in regard to the high-water amount, which assures a moist environment to the wound. There is a wide variety of polymers that have been used, either alone or blended, for the fabrication of hydrogels designed for biomedical applications focusing on treating burn injuries. The aim of this paper is to provide an up-to-date overview of hydrogels applied in burn wound dressings.

Effective Antibacterial Glass Fiber Membrane Prepared by Plasma-Enhanced Chemical Grafting

This paper reports a novel glass fiber membrane with an effective antibacterial performance by chemical grafting of quaternary ammonium salt (QAS) which is enhanced by a plasma bombardment technique. Plasma bombardment as a pretreatment of the membrane can increase the QAS anchored on the membrane from 0.8 to 1.3 wt %. The chemical grafting technique can increase the membrane zeta potential from negative values to positive values in aqueous solutions at various pHs. Furthermore, the plasma-enhanced chemical-grafting membrane has more positive zeta potentials (49.0 mV at pH = 7) than the chemical-grafting membrane without the plasma bombardment technique (38.9 mV at pH = 7). In the antibacterial performance evaluation, the Escherichia coli survival rate decreased from 127.0% of the pristine membrane to 4.1 and 11.3% of the plasma-enhanced chemical-grafting membrane and the chemical-grafting membrane, respectively. In addition, the plasma-enhanced chemical-grafting membrane shows durable antibacterial activity against E. coli with copious water rinsing as much as 3 L·cm-2.

Ionic liquid tethered PEG-based polyurethane-siloxane membranes for efficient CO2/CH4 separation

This study introduces a new polyethylene glycol (PEG) based polyurethane-siloxane membrane containing a quaternary ammonium ionic liquid for CO₂/CH₄ separation. The designed ionic liquid was prepared in two steps: (i) (3-chloropropyl)triethoxysilane (CPS) and N,N-dimethylpropyl amine (NDPA) were reacted with each other to form the methoxysilane-functionalized quaternary ammonium component, then (ii) chloride ion (Cl^-) of the product was exchanged with tetrafluoroborate ion (BF₄^-). The resulting compound, a reactive methoxysilane-functionalized ionic liquid (Si-IL) was chemically anchored to the polymer backbone through the sol-gel hydrolysis and condensation reaction. Based on the permeation tests, the IL containing PEG-based polyurethane-siloxane membranes at different concentration of Si-IL (XSi-PPUIL) were found to be potential candidates for CO₂ removal from CH₄. For instance, the CO₂/CH₄ selectivity of XSi-PPUIL membranes with the Si-IL content of 10 wt% was 3.3-fold greater than the Si-IL free membranes; while, the CO₂ permeability for IL tethered membranes was 9.7% higher than the corresponding IL-free membrane.