Carboxymethyl-kappa-carrageenan: A study of biocompatibility, antioxidant and antibacterial activities

Exploring the amyloid degradation potential of nanoformulated carrageenan-bridging in vitro and in vivo perspectives

Amyloids, with their β-sheet-rich structure, contribute to diabetes, neurodegenerative diseases, and amyloidosis by aggregating within diverse anatomical compartments. Insulin amyloid (IA), sharing structural resemblances with amyloids linked to neurological disorders, acts as a prototype, while compounds capable of degrading these fibrils hold promise as therapeutic agents for amyloidosis intervention. In this research, liposomal nanoformulated iota carrageenan (nCG) was formulated to disrupt insulin amyloids, demonstrating about a 17-20 % higher degradation efficacy compared to conventional carrageenan through thioflavin T fluorescence, dynamic light scattering analysis, and turbidity quantification. The biocompatibility of the nCG and nCG-treated insulin amyloids was evaluated through MTT assay, live-dead cell assay on V79 cells, and hemolysis testing on human blood samples to establish their safety for use in vitro. Zebrafish embryos were utilized to assess in vivo biocompatibility, while adult zebrafish were employed to monitor the degradation capacity of IA post subcutaneous injection, with fluorescence emitted by the fish captured via IVIS. This demonstrated that the formulated nCG exhibited superior anti-amyloid efficacy compared to carrageenan alone, while both materials demonstrated biocompatibility. Furthermore, through docking simulations, an exploration was conducted into the molecular mechanisms governing the inhibition of the target protein pancreatic insulin by carrageenan.

Formulations based on pullulan and a derivative as coating material for the food sector

Carboxymethylated derivatives of pullulan (PU) were synthesized and evaluated as coating for the postharvest preservation of blueberries. Carboxymethylpullulan was obtained by etherification reaction with the substitution degrees of 0.52, 0.34, and 0.26 for CMP1, CMP2, and CMP3 respectively. Infrared spectroscopy and nuclear magnetic resonance results showed characteristic signals of the carbonyl group belonging to the carboxymethyl group. Thermal analysis showed that CMP1, CMP2, and CMP3 derivatives presented thermal stability values of 209.91 C, 214.73 C, and 225.52 °C, respectively, and were lower with respect to PU with Td of 238.84 °C. Furthermore, an increase in the glass transition temperature due to carboxymethylation was determined. The chemical modification decreased the contact angle with respect to PU (71.34°) with values for CMP1, CMP2, and CMP3 of 39.89°, 53.72° and 60.61°, respectively. The carboxymethylation also increased the water vapor permeability and mechanical properties of the films. In addition, it was found that the CMP molecules affected the optical properties. The application of CMP-based coatings reduced the mass loss and ripening rate of blueberries compared to native pullulan, therefore, packaging from CMP molecules could be used as a coating capable of delaying ripening and extending the shelf life of fruits.

The potential of carboxylmethyl cellulose from empty fruit bunch as versatile material in food coating: A review

The rising demand for food packaging has led to a growing interest in sustainable and eco-friendly food coatings. Carboxymethyl cellulose (CMC), being a versatile cellulose derivative produced from various lignocellulosic sources, has emerged in edible food coatings. This review evaluates the research trends on CMC production from empty fruit bunch (EFB) as a potential edible food coating material by systematic review approach. It explores sustainable pre-treatment for green cellulose and different CMC synthesis methods. The review compares CMC-based coatings to other materials, focusing on formulation processes, coating quality, safety, and commercial feasibility. The bibliometric analysis is performed to correlate food coating and CMC. As a result, the study discovered the rapid growth in research on edible food coatings made from CMC for various food industry applications. The green approach such as ozone pre-treatment appear as promising method for cellulose isolation from EFB to be used as raw material for CMC. The synthesis conditions of the treatment would affect the CMC characteristics and usage. Herein, utilizing CMC from cellulose EFB in coating formulation and on coated food shows different benefits. This review provides a road map for future research with potential to make important contributions to the food industry's long-term evolution.

Tailor-Made Polysaccharides for Biomedical Applications

Polysaccharides (PSAs) are carbohydrate-based macromolecules widely used in the biomedical field, either in their pure form or in blends/nanocomposites with other materials. The relationship between structure, properties, and functions has inspired scientists to design multifunctional PSAs for various biomedical applications by incorporating unique molecular structures and targeted bulk properties. Multiple strategies, such as conjugation, grafting, cross-linking, and functionalization, have been explored to control their mechanical properties, electrical conductivity, hydrophilicity, degradability, rheological features, and stimuli-responsiveness. For instance, custom-made PSAs are known for their worldwide biomedical applications in tissue engineering, drug/gene delivery, and regenerative medicine. Furthermore, the remarkable advancements in supramolecular engineering and chemistry have paved the way for mission-oriented biomaterial synthesis and the fabrication of customized biomaterials. These materials can synergistically combine the benefits of biology and chemistry to tackle important biomedical questions. Herein, we categorize and summarize PSAs based on their synthesis methods, and explore the main strategies used to customize their chemical structures. We then highlight various properties of PSAs using practical examples. Lastly, we thoroughly describe the biomedical applications of tailor-made PSAs, along with their current existing challenges and potential future directions.

Chemically modified seaweed polysaccharides: Improved functional and biological properties and prospective in food applications

Seaweed polysaccharides are natural biomacromolecules with unique physicochemical properties (e.g., good gelling, emulsifying, and film-forming properties) and diverse biological activities (e.g., anticoagulant, antioxidant, immunoregulatory, and antitumor effects). Furthermore, they are nontoxic, biocompatible and biodegradable, and abundant in resources. Therefore, they have been widely utilized in food, cosmetics, and pharmaceutical industries. However, their properties and bioactivities sometimes are not satisfactory for some purposes. Modification of polysaccharides can impart the amphiphilicity and new functions to the biopolymers and change the structure and conformation, thus effectively improving their functional properties and biological activities so as to meet the requirement for targeted applications. This review outlined the modification methods of representative red algae polysaccharides (carrageenan and agar), brown algae polysaccharides (fucoidan, alginate, and laminaran), and green algae polysaccharides (ulvan) that have potential food applications, including etherification, esterification, degradation, sulfation, phosphorylation, selenylation, and so on. The improved functional properties and bioactivities of the modified seaweed polysaccharides and their potential food applications are also summarized.

Encapsulation of Active Substances in Natural Polymer Coatings

Already used in the food, pharmaceutical, cosmetic, and agrochemical industries, encapsulation is a strategy used to protect active ingredients from external degradation factors and to control their release kinetics. Various encapsulation techniques have been studied, both to optimise the level of protection with respect to the nature of the aggressor and to favour a release mechanism between diffusion of the active compounds and degradation of the barrier material. Biopolymers are of particular interest as wall materials because of their biocompatibility, biodegradability, and non-toxicity. By forming a stable hydrogel around the drug, they provide a 'smart' barrier whose behaviour can change in response to environmental conditions. After a comprehensive description of the concept of encapsulation and the main technologies used to achieve encapsulation, including micro- and nano-gels, the mechanisms of controlled release of active compounds are presented. A panorama of natural polymers as wall materials is then presented, highlighting the main results associated with each polymer and attempting to identify the most cost-effective and suitable methods in terms of the encapsulated drug.

Self-assembly mucoadhesive beads of κ-carrageenan/sericin for indomethacin oral extended release

Oral drug administration, especially when composed of mucoadhesive delivery systems, has been a research trend due to increased residence time and contact with the mucosa, potentially increasing drug bioavailability and stability. In this context, this study aimed to develop self-assembly mucoadhesive beads composed of blends of κ-carrageenan and sericin (κ-Car/Ser) loaded with the anti-inflammatory drug indomethacin (IND). We investigated the swelling, adhesion behaviour, and mechanical/physical properties of the beads, assessing their effects on cell viability, safety and permeation characteristics in both 2D and triple-culture model. The swelling ratio of the beads indicated pH-responsiveness, with maximum water absorption at pH 6.8, and strong mucoadhesion, increasing primarily with higher polymer concentrations. The beads exhibited thermal stability and no chemical interaction with IND, showing improved mechanical properties. Furthermore, the beads remained stable during accelerated and long-term storage studies. The beads were found to be biocompatible, and IND encapsulation improved cell viability (>70 % in both models, 79 % in VN) and modified IND permeation through the models (6.3 % for F5 formulation (κ-Car 0.90 % w/v | Ser 1.2 % w/v| IND 3.0 g); 10.9 % for free IND, p < 0.05). Accordingly, κ-Car/Ser/IND beads were demonstrated to be a promising IND drug carrier to improve oral administration while mitigating the side effects of non-steroidal anti-inflammatories.

Raloxifene encapsulated spanlastic nanogel for the prevention of bone fracture risk via transdermal administration: Pharmacokinetic and efficacy study in animal model

This research work is to evaluate spanlastic-loaded raloxifene (RLX) nanogel administration via the transdermal route to avoid its hepatic metabolism and to enhance the bioavailability for better management of osteoporosis. RLX-loaded spanlastic nanogel was prepared and characterized for its viscosity, pH, spreadability, and texture profile. The formulation was applied on the skin surface of the animal for pharmacokinetic evaluation, and later, the efficacy of the formulation was assessed in ovariectomized female Wistar rats. The nanogel was obtained with a viscosity (2552.66 ± 30.61 cP), pH (7.1 ± 0.1), and spreadability (7.1 ± 0.2 cm). The texture properties, cohesiveness, and adhesiveness of the nanogel showed its suitability for transdermal application. Nanogel showed no sign of edema and erythema in the skin irritation test which revealed its safety for transdermal application. The t1/2 obtained for RLX-spanlastic nanogel (37.02 ± 0.59 h) was much higher than that obtained for RLX-oral suspension (14.43 h). The relative bioavailability was found to be 215.96% for RLX-spanlastic nanogel, and the drug and formulation did not show any toxicity in any of the vital organs, as well as no hematological changes occurring in blood samples. In microarchitectural measurement, RLX-spanlastic nanogel exhibited no unambiguous deviations along with improved bone mineral density compared to the RLX suspension treated group. Transdermal administration of RLX-spanlastic nanogel showed significant improvement of drug bioavailability (approx. twice to oral administration) without any toxic effect in the treated rats. Hence, spanlastic nanogel could be a better approach to deliver RLX via transdermal route for the management of osteoporosis.

Development and Evaluation of Alginate- and Carrageenan-Incorporated Scaffold for Bone Regeneration: An In Vitro Study

INTRODUCTION

Periodontitis, a persistent inflammatory condition, results in the deterioration of both the hard and soft tissues in the periodontium, leading to the formation of intrabony defects. Restoring the lost tissues, particularly bone, is possible through tissue engineering techniques utilizing scaffolds made from different polymers. Consequently, this research focuses on creating and assessing a scaffold infused with alginate (Sigma Aldrich, Gillingham, UK) and carrageenan (Sigma Aldrich, Gillingham, UK) for the purpose of bone regeneration.

METHODS

An in vitro investigation was conducted to assess the characteristics of the recently formulated scaffold. Spectroscopic analysis, tensile strength testing, scanning electron microscopy (SEM) analysis, and degradation testing were carried out to evaluate both the physical and biological attributes of the scaffold.

RESULTS

IBM SPSS Statistics for Windows, V. 1.2 (IBM Corp., Armonk, NY, USA) was used for statistical analysis. A one-way ANOVA test was done to determine the significance of tensile strength, and a paired t-test was done to check the significance of the degradation test. The in vitro research unveiled notable distinctions in the physical and biological attributes between the scaffold infused with alginate and carrageenan and the PerioCol® (p<0.05).

CONCLUSION

The scaffold incorporating alginate and carrageenan demonstrated superior outcomes concerning parameters such as tensile stress and strain, degradation rate, percentage bone volume, and object surface density when contrasted with the conventional PerioCol®. Therefore, the scaffold infused with alginate and carrageenan emerges as a promising candidate for bone regeneration.

Preparation, antibacterial activity, and structure-activity relationship of low molecular weight κ-carrageenan

κ-Carrageenan (KC) is a polysaccharide widely used in food industry. It has been widely studied for its excellent physicochemical and beneficial properties. However, the high molecular weight and high viscosity of KC make it difficult to be absorbed and to exert its' biological activities, thus limit its extensive industrial application. In order to solve this problem, five low molecular weight κ-carrageenans (DCPs) were prepared by the degradation of KC using hydrogen peroxide (H2O2) and ascorbic acid (AH2). The chemical compositions and structure characteristics of the DCPs were then determined. The results showed that H2O2 and AH2 could effectively degrade KC to DCPs, and DCPs remained the basic skeletal structure of KC. DCPs showed good antibacterial activities against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Bacillus subtilis. The Minimum Inhibitory Concentration (MIC) of DCPs with the highest antibacterial effects were 5.25, 4.5, 5.25, and 4.5 mg/mL, respectively. This is due to the underlying mechanism of DCPs that bind to the bacterial membrane proteins and change the membrane permeability, thus exerting antibacterial activity. In addition, Spearman's rank correlation and Ridge regression analysis revealed that the molecular weight and the contents of 3,6-anhydro-D-galactose, aldehyde group, carboxyl, and sulfate were the main structural characteristics affecting the antibacterial activity. Our findings reveal that the H2O2-AH2 degradation treatment could significantly improve the antibacterial activity of KC and provide insights into the quantitative structure-activity relationships of the antibacterial activity of DCPs.

Exploring carrageenan: From seaweed to biomedicine-A comprehensive review

Biomaterials are pivotal in the realms of tissue engineering, regenerative medicine, and drug delivery and serve as fundamental building blocks. Within this dynamic landscape, polymeric biomaterials emerge as the frontrunners, offering unparalleled versatility across physical, chemical, and biological domains. Natural polymers, in particular, captivate attention for their inherent bioactivity. Among these, carrageenan (CRG), extracted from red seaweeds, stands out as a naturally occurring polysaccharide with immense potential in various biomedical applications. CRG boasts a unique array of properties, encompassing antiviral, antibacterial, immunomodulatory, antihyperlipidemic, antioxidant, and antitumor attributes, positioning it as an attractive choice for cutting-edge research in drug delivery, wound healing, and tissue regeneration. This comprehensive review encapsulates the multifaceted properties of CRG, shedding light on the chemical modifications that it undergoes. Additionally, it spotlights pioneering research that harnesses the potential of CRG to craft scaffolds and drug delivery systems, offering high efficacy in the realms of tissue repair and disease intervention. In essence, this review celebrates the remarkable versatility of CRG and its transformative role in advancing biomedical solutions.

Bactericidal Chitosan Derivatives and Their Superabsorbent Blends with ĸ-Carrageenan

The aim of this work is research dedicated to the search for new bactericidal systems for use in cosmetic formulations, dermocosmetics, or the production of wound dressings. Over the last two decades, chitosan, due to its special biological activity, has become a highly indispensable biopolymer with very wide application possibilities. Reports in the literature on the antibacterial effects of chitosan are very diverse, but our research has shown that they can be successfully improved through chemical modification. Therefore, in this study, results on the synthesis of new chitosan-based Schiff bases, dCsSB-SFD and dCsSB-PCA, are obtained using two aldehydes: sodium 4-formylbenzene-1,3-disulfonate (SFD) and 2-pyridine carboxaldehyde (PCA), respectively. Chitosan derivatives synthesized in this way demonstrate stronger antimicrobial activity. Carrying out the procedure of grafting chitosan with a caproyl chain allowed obtaining compatible blends of chitosan derivatives with κ-carrageenan, which are stable hydrogels with a high swelling coefficient. Furthermore, the covalently bounded poly(ε-caprolactone) (PCL) chain improved the solubility of obtained polymers in organic solvents. In this respect, the Schiff base-containing polymers obtained in this study, with special hydrogel and antimicrobial properties, are very promising materials for potential use as a controlled-release formulation of both hydrophilic and hydrophobic drugs in cosmetic products for skin health.

Recent Progress of Carrageenan-Based Composite Films in Active and Intelligent Food Packaging Applications

Recently, as concerns about petrochemical-derived polymers increase, interest in biopolymer-based materials is increasing. Undoubtedly, biopolymers are a better alternative to solve the problem of synthetic polymer-based plastics for packaging purposes. There are various types of biopolymers in nature, and mostly polysaccharides are used in this regard. Carrageenan is a hydrophilic polysaccharide extracted from red algae and has recently attracted great interest in the development of food packaging films. Carrageenan is known for its excellent film-forming properties, high compatibility and good carrier properties. Carrageenan is readily available and low cost, making it a good candidate as a polymer matrix base material for active and intelligent food packaging films. The carrageenan-based packaging film lacks mechanical, barrier, and functional properties. Thus, the physical and functional properties of carrageenan-based films can be enhanced by blending this biopolymer with functional compounds and nanofillers. Various types of bioactive ingredients, such as nanoparticles, natural extracts, colorants, and essential oils, have been incorporated into the carrageenan-based film. Carrageenan-based functional packaging film was found to be useful for extending the shelf life of packaged foods and tracking spoilage. Recently, there has been plenty of research work published on the potential of carrageenan-based packaging film. Therefore, this review discusses recent advances in carrageenan-based films for applications in food packaging. The preparation and properties of carrageenan-based packaging films were discussed, as well as their application in real-time food packaging. The latest discussion on the potential of carrageenan as an alternative to traditionally used synthetic plastics may be helpful for further research in this field.

Carboxymethylated and Sulfated Furcellaran from Furcellaria lumbricalis and Its Immobilization on PLA Scaffolds

This study involved the creation of highly porous PLA scaffolds through the porogen/leaching method, utilizing polyethylene glycol as a porogen with a 75% mass ratio. The outcome achieved a highly interconnected porous structure with a thickness of 25 μm. To activate the scaffold's surface and improve its hydrophilicity, radiofrequency (RF) air plasma treatment was employed. Subsequently, furcellaran subjected to sulfation or carboxymethylation was deposited onto the RF plasma treated surfaces with the intention of improving bioactivity. Surface roughness and water wettability experienced enhancement following the surface modification. The incorporation of sulfate/carboxymethyl group (DS = 0.8; 0.3, respectively) is confirmed by elemental analysis and FT-IR. Successful functionalization of PLA scaffolds was validated by SEM and XPS analysis, showing changes in topography and increases in characteristic elements (N, S, Na) for sulfated (SF) and carboxymethylated (CMF). Cytocompatibility was evaluated by using mouse embryonic fibroblast cells (NIH/3T3).

Structure-activity relationships of bioactive polysaccharides extracted from macroalgae towards biomedical application: A review

Macroalgae are valuable and structurally diverse sources of bioactive compounds among marine resources. The cell walls of macroalgae are rich in polysaccharides which exhibit a wide range of biological activities, such as anticoagulant, antioxidant, antiviral, anti-inflammatory, immunomodulatory, and antitumor activities. Macroalgae polysaccharides (MPs) have been recognized as one of the most promising candidates in the biomedical field. However, the structure-activity relationships of bioactive polysaccharides extracted from macroalgae are complex and influenced by various factors. A clear understanding of these relationships is indeed critical in developing effective biomedical applications with MPs. In line with these challenges and knowledge gaps, this paper summarized the structural characteristics of marine MPs from different sources and relevant functional and bioactive properties and particularly highlighted those essential effects of the structure-bioactivity relationships presented in biomedical applications. This review not only focused on elucidating a particular action mechanism of MPs, but also intended to identify a novel or potential application of these valued compounds in the biomedical field in terms of their structural characteristics. In the last, the challenges and prospects of MPs in structure-bioactivity elucidation were further discussed and predicted, where they were emphasized on exploring modern biotechnology approaches potentially applied to expand their promising biomedical applications.

Design of cationic surfactant reinforced carrageenan waterproof composite films and applied as water induced electricity generator

Carrageenan (CR) is a renewable polysaccharide material for packaging application due to its good film-forming property, but its use can be limited by the water solubility. In this research, CR hydrogels were modified by quaternary ammonium surfactants with different length of hydrocarbon tails (n, 8≦n≦16) by adsorption method and waterproof films were obtained after drying. The composition and charge interaction of composite films was confirmed by FTIR. Both thermogravimetric analysis and energy dispersive spectrometer indicated that the surfactant ions replaced K+ to form complexes with CR. The X-ray diffraction revealed the decreased amorphous nature of composite films compared to neat CR film. Water-related physical properties, such as water content, weight percentage change after contact with water, water vapor transmission, and water contact angle were intimately related to n. When 8≦n≦14, the waterproof properties were enhanced with the increase of n. Meanwhile, the waterproof property of composite film was ascertained by the no leakage result in the boiling water packaging experiment. When n = 16, sandwich structure was found in the sectional micromorphology images, and water bag structure formed after immersed into water. By comparing the mechanical properties of the composite films in different condition, we found that quaternary ammonium surfactants improved significantly the tensile strength in water and increased elongation at break in dry state. The composite films can be used as water induced voltage generator for their polyelectrolyte nature. Benefiting from the high stability of the composite films in water, their water-induced voltage generation process had good recyclability. Due to the antimicrobial activity of the quaternary ammonium salts and the waterproof property, composite films were more stable and degraded more slowly than neat CR film in nature environment.

Effect of chemical modification of κ-carrageenan on its inhibitory effect against heterocyclic amine (HAs) formation in roasted tilapia fish patties

Sulfated κ-carrageenan (S-KC), carboxymethylated κ-carrageenan (C-KC), acetylated κ-carrageenan (A-KC) and phosphorylated κ-carrageenan (P-KC) were synthesized and tested for their inhibitory effect on heterocyclic amine (HAs) formation in roasted tilapia fish patties. Fish patties with 1 % of each hydrocolloid prepared by 90 % of fish and 10 % of an aqueous hydrocolloid dispersion were determined for HAs-levels after roasting. P-KC showed the strongest inhibitory effect against total HAs formation (20.95 %). Moreover, P-KC increased the content of creatinine and glucose but decreased the content of free amino acids in fish patties, indicating that P-KC may compete with creatinine and glucose to react with amino acids to suppress HAs generation. In addition, P-KC plus naringenin had a stronger inhibitory effect against HAs formation than P-KC or naringenin alone. P-KC at 1 % (w/w) and P-KC (0.5 %, w/w) plus naringenin (0.5 %, w/w) showed no significant effects on the color and textural properties compared to the control group (100 % fish), and had less impact on food quality than 1 % (w/w) KC. Therefore, our results suggest that chemical modification could enhance the inhibitory effect of some hydrocolloids on HAs formation, and an appropriate combination of hydrocolloids and flavonoids contributes to the attenuation of dietary exposure to genotoxic HAs.

Carrageenan as a macromolecular crowding agent in human umbilical cord derived mesenchymal stromal cell culture

Cell sheet tissue engineering requires prolonged in vitro culture for the development of implantable devices. Unfortunately, lengthy in vitro culture is associated with cell phenotype loss and substantially higher cost of goods, which collectively hinder clinical translation and commercialisation of tissue engineered medicines. Although macromolecular crowding has been shown to enhance and accelerate extracellular matrix deposition, whilst maintaining cellular phenotype, the optimal macromolecular crowding agent still remains elusive. Herein, we evaluated the biophysical properties of seven different carrageenan molecules at five different concentrations and their effect on human umbilical cord-derived mesenchymal stromal cell morphology, viability, metabolic activity, proliferation, extracellular matrix deposition and surface marker expression. All types of carrageenan (CR) assessed demonstrated a hydrodynamic radius increase as a function of increasing concentration; high polydispersity; and negative charge. Two iota CRs were excluded from further analysis due to poor solubility in cell culture. Among the remaining five carrageenans, the lambda medium viscosity type at concentrations of 10 and 50 μg/ml did not affect cell morphology, viability, metabolic activity, proliferation and expression of surface markers and significantly increased the deposition of collagen types I, III and IV, fibronectin and laminin. Our data highlight the potential of lambda medium viscosity carrageenan as a macromolecular crowding agent for the accelerated development of functional tissue engineered medicines.

Antitumor Activity of Carboxymethyl Pachymaran with Different Molecular Weights Based on Immunomodulatory and Gut Microbiota

Carboxymethyl pachymaran (CMP) was treated via high-temperature and cellulase hydrolysis to obtain HTCMP, HTEC-24, and HTEC-48. The chemical structure and in vivo antitumor activities of the four types of CMPs were investigated. Compared with CMP (787.9 kDa), the molecular weights of HTCMP, HTEC-24, and HTEC-48 were decreased to 429.8, 129.9, and 68.6 kDa, respectively. The viscosities and particle sizes of the CMPs could also decrease with the decline in the molecular weights. All the CMPs showed antitumor abilities, but HTEC-24 exhibited the best activity. In the animal study, when curing the spleen and thymus, CMPs displayed immunomodulatory effects by increasing the secretion of IFN-γ and IL2 in mice. The CMPs also exerted an antitumor ability by regulating the gut microbiota in tumor-bearing mice. Our results established a foundation to develop an antitumor drug with CMP.

Nanocurcumin and viable Lactobacillus plantarum based sponge dressing for skin wound healing

Curcumin loaded solid lipid nanoparticles (CSLNs) and probiotic (Lactobacillus plantarum UBLP-40; L. plantarum) were currently co-incorporated into a wound dressing. The combination with manifold anti-inflammatory, anti-infective, analgesic, and antioxidant properties of both curcumin and L. plantarum will better manage complex healing process. Recent reports indicate that polyphenolics like curcumin improve probiotic effects. Curcumin was nanoencapsulated (CSLNs) to improve its bioprofile and achieve controlled release on the wound bed. Bacteriotherapy (probiotic) is established to promote wound healing via antimicrobial activity, inhibition of pathogenic toxins, immunomodulation, and anti-inflammatory actions. Combination of CSLNs with probiotic enhanced (560%) its antimicrobial effects against planktonic cells and biofilms of skin pathogen, Staphylococcus aureus 9144. The sterile dressing was devised with selected polymers, and optimized for polymer concentration, and dressing characteristics using a central composite design. It exhibited a swelling ratio of 412 ± 36%, in vitro degradation time of 3 h, optimal water vapor transmission rate of 1516.81 ± 155.25 g/m2/day, high tensile strength, low-blood clotting index, case II transport, and controlled release of curcumin. XRD indicated strong interaction between employed polymers. FESEM revealed a porous sponge like meshwork embedded with L. plantarum and CSLNs. It degraded and released L. plantarum, which germinated in the wound bed. The sponge was stable under refrigerated conditions for up to six months. No translocation of probiotic from wound to the internal organs confirmed safety. The dressing exhibited faster wound closure and lowered bioburden in the wound area in mice. This was coupled with a decrease in TNF-α, MMP-9, and LPO levels; and an increase in VEGF, TGF-β, and antioxidant enzymes such as catalase and GSH, establishing multiple healing pathways. Results were compared with CSLNs and probiotic-alone dressings. The dressing was as effective as the silver nanoparticle-based marketed hydrogel dressing; however, the cost and risk of developing resistance would be much lower currently.

Antifouling Behavior of Copper-Modified Titania Nanotube Surfaces

Titanium and its alloys are commonly used to fabricate orthopedic implants due to their excellent mechanical properties, corrosion resistance, and biocompatibility. In recent years, orthopedic implant surgeries have considerably increased. This has also resulted in an increase in infection-associated revision surgeries for these implants. To combat this, various approaches are being investigated in the literature. One of the approaches is modifying the surface topography of implants and creating surfaces that are not only antifouling but also encourage osteointegration. Titania nanotube surfaces have demonstrated a moderate decrease in bacterial adhesion while encouraging mesenchymal stem cell adhesion, proliferation, and differentiation, and hence were used in this study. In this work, titania nanotube surfaces were fabricated using a simple anodization technique. These surfaces were further modified with copper using a physical vapor deposition technique, since copper is known to be potent against bacteria once in contact. In this study, scanning electron microscopy was used to evaluate surface topography; energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were used to evaluate surface chemistry; contact angle goniometry was used to evaluate surface wettability; and X-ray diffraction was used to evaluate surface crystallinity. Antifouling behavior against a gram-positive and a gram-negative bacterium was also investigated. The results indicate that copper-modified titania nanotube surfaces display enhanced antifouling behavior when compared to other surfaces, and this may be a potential way to prevent infection in orthopedic implants.

Decellularized Liver Nanofibers Enhance and Stabilize the Long-Term Functions of Primary Human Hepatocytes In Vitro

Owing to significant differences across species in liver functions, in vitro human liver models are used for screening the metabolism and toxicity of compounds, modeling diseases, and cell-based therapies. However, the extracellular matrix (ECM) scaffold used for such models often does not mimic either the complex composition or the nanofibrous topography of native liver ECM. Thus, here novel methods are developed to electrospin decellularized porcine liver ECM (PLECM) and collagen I into nano- and microfibers (≈200-1000 nm) without synthetic polymer blends. Primary human hepatocytes (PHHs) on nanofibers in monoculture or in coculture with nonparenchymal cells (3T3-J2 embryonic fibroblasts or primary human liver endothelial cells) display higher albumin secretion, urea synthesis, and cytochrome-P450 1A2, 2A6, 2C9, and 3A4 enzyme activities than on conventionally adsorbed ECM controls. PHH functions are highest on the collagen/PLECM blended nanofibers (up to 34-fold higher CYP3A4 activity relative to adsorbed ECM) for nearly 7 weeks in the presence of the fibroblasts. In conclusion, it is shown for the first time that ECM composition and topography synergize to enhance and stabilize PHH functions for several weeks in vitro. The nanofiber platform can prove useful for the above applications and to elucidate cell-ECM interactions in the human liver.

Algal Phycocolloids: Bioactivities and Pharmaceutical Applications

Seaweeds are abundant sources of diverse bioactive compounds with various properties and mechanisms of action. These compounds offer protective effects, high nutritional value, and numerous health benefits. Seaweeds are versatile natural sources of metabolites applicable in the production of healthy food, pharmaceuticals, cosmetics, and fertilizers. Their biological compounds make them promising sources for biotechnological applications. In nature, hydrocolloids are substances which form a gel in the presence of water. They are employed as gelling agents in food, coatings and dressings in pharmaceuticals, stabilizers in biotechnology, and ingredients in cosmetics. Seaweed hydrocolloids are identified in carrageenan, alginate, and agar. Carrageenan has gained significant attention in pharmaceutical formulations and exhibits diverse pharmaceutical properties. Incorporating carrageenan and natural polymers such as chitosan, starch, cellulose, chitin, and alginate. It holds promise for creating biodegradable materials with biomedical applications. Alginate, a natural polysaccharide, is highly valued for wound dressings due to its unique characteristics, including low toxicity, biodegradability, hydrogel formation, prevention of bacterial infections, and maintenance of a moist environment. Agar is widely used in the biomedical field. This review focuses on analysing the therapeutic applications of carrageenan, alginate, and agar based on research highlighting their potential in developing innovative drug delivery systems using seaweed phycocolloids.

Effects of degradation on the physicochemical and antioxidant properties of carboxymethyl pachymaran

Poria cocos (Schw.) Wolf is a well-known edible and medicinal fungus. The polysaccharide in the sclerotium of P. cocos was extracted and prepared into carboxymethyl pachymaran (CMP). Three different degradation treatments including high temperature (HT), high pressure (HP) and gamma irradiation (GI) were used to process CMP. The changes in physicochemical properties and antioxidant activities of CMP were then comparatively investigated. We found that the molecular weights of HT-CMP, HP-CMP, and GI-CMP decreased from 787.9 kDa to 429.8, 569.5 and 6.0 kDa, respectively. Degradation treatments had no effect on the main chains of →3-β-D-Glcp-(1 → while changed the branched sugar residues. The polysaccharide chains of CMP were depolymerized after high pressure and gamma irradiation treatments. The three degradation methods improved the stability of CMP solution while decreased the thermal stability of CMP. In addition, we found that the GI-CMP with lowest molecular weight had the best antioxidant activity. Our results suggest that gamma irradiation treatment could degrade CMP as functional foods with strong antioxidant activity.

Biopolymer-Based Nanogel Approach in Drug Delivery: Basic Concept and Current Developments

Due to their increased surface area, extent of swelling and active substance-loading capacity and flexibility, nanogels made from natural and synthetic polymers have gained significant interest in scientific and industrial areas. In particular, the customized design and implementation of nontoxic, biocompatible, and biodegradable micro/nano carriers makes their usage very feasible for a range of biomedical applications, including drug delivery, tissue engineering, and bioimaging. The design and application methodologies of nanogels are outlined in this review. Additionally, the most recent advancements in nanogel biomedical applications are discussed, with particular emphasis on applications for the delivery of drugs and biomolecules.

A comparison of the impacts of different polysaccharides on the sono-physico-chemical consequences of ultrasonic-assisted modifications

This study aimed to examine the sono-physico-chemical effects of ultrasound (UND) and its impact on the conjugate rates of morin (MOI) following the addition of polysaccharides in various conditions. In comparison to the control group, the incorporation of quaternary ammonium chitosan decreased the rate of MOI conjugation by 17.38%, but the addition of locust bean gum enhanced the grafting rate by 29.89%. Notably, the highest degree of myofibrillar protein (MRN) unfolding (fluorescence intensity: 114435.50), the most stable state (-44.98 mV), and the greatest specific surface area (393.06 cm2/cm3) were observed in the UMP/LBG group. The outcomes of atomic force microscopy and scanning electron microscopy revealed that the inclusion of locust bean gum led to a different microscopic morphology than the other two polysaccharides, which may be the primary cause of the strongest sono-physico-chemical effects of the system. This work demonstrated that acoustic settings can be tuned based on the characteristics of polysaccharides to maximize the advantages of sono-physico-chemical impacts in UND-assisted MOI processing.

Physico-Mechanical Optimization and Antimicrobial Properties of the Bionanocomposite Films Containing Gallic Acid and Zinc Oxide Nanoparticles

The mechanical and physical properties of the bionanocomposite films based on κ-carrageenan (KC)-gelatin (Ge) containing zinc oxide nanoparticles (ZnONPs) and gallic acid (GA) were optimized using the response surface method, and the optimum amounts of 11.19 wt% GA and 1.20 wt% ZnONPs were obtained. The results of XRD, SEM, and FT-IR tests showed the uniform distribution of the ZnONPs and GA in the film microstructure, and suitable interactions between biopolymers and these additives, which led to increasing the structural cohesion of the biopolymer matrix and improving the physical and mechanical properties of the KC-Ge-based bionanocomposite. In the films containing gallic acid and ZnONPs, an antimicrobial effect was not observed against E. coli; however, the GA-loaded and optimum films show an antimicrobial effect against S. aureus. The optimum film showed a higher inhibition effect against S. aureus compared to the ampicillin- and gentamicin-loaded discs.

Antioxidant and DNA protecting activity of carboxymethylated polysaccharides from Cortex periplocae

In this study, polysaccharide from Cortex periplocae (CPP) was modified and three carboxymethylation modification polysaccharides (CPPCs) were obtained, and their physicochemical characteristics and in vitro biological activities were investigated. Based on the ultraviolet-visible (UV-Vis) scan, CPPs (CPP and CPPCs) did not contain nucleic acids or proteins. However, the Fourier transform infrared (FTIR) spectrum showed a new absorption peak around 1731 cm^-1. In addition, three absorption peaks near 1606, 1421, and 1326 cm^-1 were enhanced after carboxymethylation modification. Based on UV-Vis scan, the maximum absorption wavelength of Congo Red + CPPs exhibited a red-shift compared to Congo Red meant CPPs had a triple helix conformation. Scanning electron microscopy (SEM) indicated that CPPCs exhibited more fragments and non-uniform-sized filiform than CPP. Thermal analysis showed that CPPCs degraded between the temperature 240 °C-350 °C and CPP in the 270 °C-350 °C. In addition, the antioxidant and DNA protecting activities of CPPCs were significantly enhanced compared to CPP. Overall, this study demonstrated the potential applications of CPPs in food and pharmaceutical industries.

Role of metal chlorides in the gelation and properties of fucoidan/κ-carrageenan hydrogels

Metal ions play a crucial role in forming hydrogels, and their effects on fucoidan (FUC): κ-carrageenan (KC) mixed gels were investigated. The results indicated that the FUC: KC mixed gels (FC) were promoted by K⁺ and Ca²⁺ but destroyed by Fe³⁺. The gel strength of FC was enhanced by K⁺ and Ca²⁺, with G' and G″ being highest at 50 mmol/L KCl and 25 mmol/L CaCl₂, respectively. Water mobility was weakened after the addition of KCl and CaCl₂ in accordance with the decrease in T₂₃ relaxation time (free water, 100-1000 ms). After addition of KCl and CaCl₂, the FC groups presented a typical three-dimensional network structure in contrast to the lamellar, disordered, and broken structure of FUC. Moreover, the FT-IR spectrum certified the enhancement of hydrogen bonds and the occurrence of electrostatic interactions during gel formation by the red-shift of the OH stretching vibration of the Ca²⁺ group and the blue-shift of the COS vibrations. The XRD results confirmed that the binding of Ca²⁺ to FC was tighter than that of K⁺ at the same charge content. These results provide a theoretical basis for understanding the interaction mechanism of FC with metal ions.

Biological activity of algal derived carrageenan: A comprehensive review in light of human health and disease

Carrageenans are a family of natural linear sulfated polysaccharides derived from red seaweeds and used as a common food additive. Carrageenan's properties, impact on health, and aesthetic benefits have all been studied for a long time; however, the mechanisms are still unclear. In pharmaceutical aspects, carrageenan displayed potential antioxidant and immunomodulatory properties in both in vivo and in vitro action. It also contributes to potential disease-preventive activities through dynamic modulation of important intracellular signaling pathways, regulation of ROS buildup, and preservation of major cell survival and death processes which leads to potential drug development. Furthermore, the chemical synthesis of the current bioactive medicine with confirmational rearrangement may increase availability and bioactivity needs diligent examination. In this review, we give an up-to-date overview of recent research on Carrageenan with reference to health and therapeutic advantages. In addition, we have focused on structural conformation and its primary strategic deployment in disease prevention, as well as the mechanistic investigation of how it functions to combat various disease-preventive employed for future therapeutic interventions. This review may get new insights into the possible novel role of carrageenan and open up a novel disease-preventive mechanism and enhance human health.

Synthesis of biodegradable antimicrobial pH-sensitive silver nanocomposites reliant on chitosan and carrageenan derivatives for 5-fluorouracil drug delivery toward HCT116 cancer cells

The current research relies on a one-pot green biosynthesis of silver nanoparticles (SNPs) with various ratios of silver (Ag) in the existence of N, N, N-trimethyl chitosan chloride (TMC) and carboxymethyl kappa-carrageenan (CMKC), to investigate the effectiveness of the synthesized silver nanocomposites (SNCs) as pH sensitive biodegradable carrier for orally intestinal delivery of 5-fluorouracil (5-FU) drug. FTIR, XRD, TEM and FE-SEM/EDX methods were utilized to demonstrate the structure of the prepared polyelectrolyte complex PEC (TMC/CMKC) and SNCs (TMC/CMKC/Ag). The results showed that the 5-FU encapsulation effectiveness inside all of the prepared SNCs samples was improved by increasing the concentration of Ag, reaching 92.16 ± 0.57 % with 3 % Ag. In vitro release behavior of 5-FU loaded SNC 3 % (TMC/CMKC/Ag 3 %), displayed slow and sustained release reaching 96.3 ± 0.81 % up to 24 h into pH 7.4 medium. The successful release of 5-FU from the loaded SNC 3 % was confirmed through occurrence of strong cytotoxicity, with an IC₅₀ value of 31.15 μg/ml, and high % of apoptotic cells (30.66 %) within the treated HCT116 cells. Besides, SNC 3 % showed good biodegradability and antimicrobial properties against different bacterial strains. Overall, SNC 3 % can be suggested as an effective system for both controlled drug delivery and antibacterial action.

Recent advances in exploiting carrageenans as a versatile functional material for promising biomedical applications

Carrageenans are a group of biopolymers widely found in red seaweeds. Commercial carrageenans have been traditionally used as emulsifiers, stabilizers, and thickening and gelling agents in food products. Carrageenans are regarded as bioactive polysaccharides with disease-modifying and microbiota-modulating activities. Novel biomedical applications of carrageenans as biocompatible functional materials for fabricating hydrogels and nanostructures, including carbon dots, nanoparticles, and nanofibers, have been increasingly exploited. In this review, we describe the unique structural characteristics of carrageenans and their functional relevance. We summarize salient physicochemical features, including thixotropic and shear-thinning properties, of carrageenans. Recent results from clinical trials in which carrageenans were applied as both antiviral and antitumor agents and functional materials are discussed. We also highlight the most recent advances in the development of carrageenan-based targeted drug delivery systems with various pharmaceutical formulations. Promising applications of carrageenans as a bioink material for 3D printing in tissue engineering and regenerative medicine are systematically evaluated. We envisage some key hurdles and challenges in the commercialization of carrageenans as a versatile material for clinical practice. This comprehensive review of the intimate relationships among the structural features, unique rheological properties, and biofunctionality of carrageenans will provide novel insights into their biomedicine application potential.

Implantable biomedical materials for treatment of bone infection

The treatment of bone infections has always been difficult. The emergence of drug-resistant bacteria has led to a steady decline in the effectiveness of antibiotics. It is also especially important to fight bacterial infections while repairing bone defects and cleaning up dead bacteria to prevent biofilm formation. The development of biomedical materials has provided us with a research direction to address this issue. We aimed to review the current literature, and have summarized multifunctional antimicrobial materials that have long-lasting antimicrobial capabilities that promote angiogenesis, bone production, or "killing and releasing." This review provides a comprehensive summary of the use of biomedical materials in the treatment of bone infections and a reference thereof, as well as encouragement to perform further research in this field.

Physicochemical properties of electrostatically crosslinked carrageenan/chitosan hydrogels and carrageenan/chitosan/Laponite nanocomposite hydrogels

In this work physical carrageenan/chitosan (Car/Chit) hydrogels are prepared by electrostatic complexation between the two oppositely charged polysaccharides. The hydrogels have storage moduli in the order of 5-10 kPa and swelling ratios in the order of 5000-6000 %. At conditions where both polysaccharides are highly charged (pH 5) the swelling ratios are lower than the ones at conditions of lower dissociation i.e., at pH 2 and 7 and the opposite trend is found for the storage modulus. Chit appears to act as a crosslinker for Car as increasing its concentration the swelling ratio decreases and the moduli increase. The hydrogels can incorporate the nanoclay Laponite (Lap) and form hybrid nanocomposites where the intercalation by the two biopolymers leads to exfoliation of the clay nanoplatelets in the presence of both Car and Chit. The composite hydrogels retain the mechanical properties of the Car/Chit hydrogels at the studied pH range (pH 2 to pH 7). This shows the prepared hydrogels can be potentially used as multifunctional biomaterials for drug delivery, tissue engineering and bone regeneration applications.

Processing and Characterization of a New Quaternary Alloy Ti10Mo8Nb6Zr for Potential Biomedical Applications

The study of new metallic biomaterials for application in bone tissue repair has improved due to the increase in life expectancy and the aging of the world population. Titanium alloys are one of the main groups of biomaterials for these applications, and beta-type titanium alloys are more suitable for long-term bone implants. The objective of this work was to process and characterize a new Ti₁₀Mo₈Nb₆Zr beta alloy. Alloy processing involves arc melting, heat treatment, and cold forging. The characterization techniques used in this study were X-ray fluorescence spectroscopy, X-ray diffraction, differential scanning calorimetry, optical microscopy, microhardness measurements, and pulse excitation technique. In vitro studies using adipose-derived stem cells (ADSC) were performed to evaluate the cytotoxicity and cell viability after 1, 4, and 7 days. The results showed that the main phase during the processing route was the beta phase. At the end of processing, the alloy showed beta phase, equiaxed grains with an average size of 228.7 µm, and low Young's modulus (83 GPa). In vitro studies revealed non-cytotoxicity and superior cell viability compared to CP Ti. The addition of zirconium led to a decrease in the beta-transus temperature and Young's modulus and improved the biocompatibility of the alloy. Therefore, the Ti₁₀Mo₈Nb₆Zr alloy is a promising candidate for application in the biomedical field.

Sulfated carboxymethyl cellulose and carboxymethyl κ-carrageenan immobilization on 3D-printed poly-ε-caprolactone scaffolds differentially promote pre-osteoblast proliferation and osteogenic activity

The lack of bioactivity in three-dimensional (3D)-printing of poly-є-caprolactone (PCL) scaffolds limits cell-material interactions in bone tissue engineering. This constraint can be overcome by surface-functionalization using glycosaminoglycan-like anionic polysaccharides, e.g., carboxymethyl cellulose (CMC), a plant-based carboxymethylated, unsulfated polysaccharide, and κ-carrageenan, a seaweed-derived sulfated, non-carboxymethylated polysaccharide. The sulfation of CMC and carboxymethylation of κ-carrageenan critically improve their bioactivity. However, whether sulfated carboxymethyl cellulose (SCMC) and carboxymethyl κ-carrageenan (CM-κ-Car) affect the osteogenic differentiation potential of pre-osteoblasts on 3D-scaffolds is still unknown. Here, we aimed to assess the effects of surface-functionalization by SCMC or CM-κ-Car on the physicochemical and mechanical properties of 3D-printed PCL scaffolds, as well as the osteogenic response of pre-osteoblasts. MC3T3-E1 pre-osteoblasts were seeded on 3D-printed PCL scaffolds that were functionalized by CM-κ-Car (PCL/CM-κ-Car) or SCMC (PCL/SCMC), cultured up to 28 days. The scaffolds’ physicochemical and mechanical properties and pre-osteoblast function were assessed experimentally and by finite element (FE) modeling. We found that the surface-functionalization by SCMC and CM-κ-Car did not change the scaffold geometry and structure but decreased the elastic modulus. Furthermore, the scaffold surface roughness and hardness increased and the scaffold became more hydrophilic. The FE modeling results implied resilience up to 2% compression strain, which was below the yield stress for all scaffolds. Surface-functionalization by SCMC decreased Runx2 and Dmp1 expression, while surface-functionalization by CM-κ-Car increased Cox2 expression at day 1. Surface-functionalization by SCMC most strongly enhanced pre-osteoblast proliferation and collagen production, while CM-κ-Car most significantly increased alkaline phosphatase activity and mineralization after 28 days. In conclusion, surface-functionalization by SCMC or CM-κ-Car of 3D-printed PCL-scaffolds enhanced pre-osteoblast proliferation and osteogenic activity, likely due to increased surface roughness and hydrophilicity. Surface-functionalization by SCMC most strongly enhanced cell proliferation, while CM-κ-Car most significantly promoted osteogenic activity, suggesting that surface-functionalization by CM-κ-Car may be more promising, especially in the short-term, for in vivo bone formation.

Effects of κ-carrageenan of gel quality on threadfin bream (Nemipterus spp.) surimi containing salted duck egg white powder

This study aimed to evaluate the combined effect of κ-carrageenan and salted duck egg white powder (SDEWP) in improving the gel quality of threadfin bream surimi. Effects of κ-carrageenan at different levels (0-2 %) on gel properties of threadfin bream surimi without and with salted duck egg white powder at 3 % (protein equivalent) were investigated. A combination of 0.5 % κ-carrageenan and SDEWP increased breaking force of surimi gel by 139.7 % and deformation by 55.1 %, compared to the control (P < 0.05). The expressible moisture content (EMC) was decreased by 50.0 % in the surimi gel added with 0.5 % κ-carrageenan and SDEWP. Hardness, cohesiveness, gumminess, and chewiness of surimi gel were also improved (P < 0.05). However, springiness of surimi gel was not affected. SDEWP reduced proteolytic degradation in surimi gel. Surimi gel with augmented whiteness was attained when κ-carrageenan was added at higher levels. Microstructure of surimi gel shown that the gel became denser and more uniform when added with 0.5 % κ-carrageenan and SDEWP. Therefore, κ-carrageenan can be used to enhance the effectiveness of SDEWP and further improve the gel quality of threadfin bream surimi added with SDEWP.

Marine Bioactive Compounds Derived from Macroalgae as New Potential Players in Drug Delivery Systems: A Review

The marine algal ecosystem is characterized by a rich ecological biodiversity and can be considered as an unexploited resource for the discovery and isolation of novel bioactive compounds. In recent years, marine macroalgae have begun to be explored for their valuable composition in bioactive compounds and opportunity to obtain different nutraceuticals. In comparison with their terrestrial counterparts, Black Sea macroalgae are potentially good sources of bioactive compounds with specific and unique biological activities, insufficiently used. Macroalgae present in different marine environments contain several biologically active metabolites, including polysaccharides, oligosaccharides, polyunsaturated fatty acids, sterols, proteins polyphenols, carotenoids, vitamins, and minerals. As a result, they have received huge interest given their promising potentialities in supporting antitumoral, antimicrobial, anti-inflammatory, immunomodulatory, antiangiogenic, antidiabetic, and neuroprotective properties. An additional advantage of ulvans, fucoidans and carrageenans is the biocompatibility and limited or no toxicity. This therapeutic potential is a great natural treasure to be exploited for the development of novel drug delivery systems in both preventive and therapeutic approaches. This overview aims to provide an insight into current knowledge focused on specific bioactive compounds, which represent each class of macroalgae e.g., ulvans, fucoidans and carrageenans, respectively, as valuable potential players in the development of innovative drug delivery systems.

Carboxymethyl carrageenan immobilized on 3D-printed polycaprolactone scaffold for the adsorption of calcium phosphate/strontium phosphate adapted to bone regeneration

Three dimensional (3D) substrates based on natural and synthetic polymers enhance the osteogenic and mechanical properties of the bone tissue engineering scaffolds. Here, a novel bioactive composite scaffolds from polycaprolactone /kappa-carrageenan were developed for bone regeneration applications. 3D PCL scaffolds were fabricated by 3D printing method followed by coating with carboxymethyl kappa-carrageenan. This organic film was used to create calcium and strontium phosphate layers via a modified alternate soaking process in CaCl ₂ /SrCl ₂ and Na₂HPO₄ solutions in which calcium ions were replaced by strontium, with different amounts of strontium in the solutions. Various characterization techniques were executed to analyze the effects of strontium ion on the scaffold properties. The morphological results demonstrated the highly porous with interconnected pores and uniform pore sizes scaffolds. It was indicated that the highest crystallinity and compressive strength were obtained when 100% CaCl₂ was replaced by SrCl₂ in the solution (P-C-Sr). Incorporation of Sr onto the structure increased the degradation rate of the scaffolds. Mesenchymal stem cells (MSCs) culture on the scaffolds showed that Sr effectively improved attachment and viability of the MSCs and accelerated osteogenic differentiation as revealed by Alkaline phosphatase activity, calcium content and Real Time-Reverse transcription polymerase chain reaction assays.

Polysaccharide-based electroconductive hydrogels: Structure, properties and biomedical applications

Architecting an appropriate platform for biomedical applications requires setting a balance between simplicity and complexity. Polysaccharides (PSAs) play essential roles in our life in food resources, structural materials, and energy storage capacitors. Moreover, the diversity and abundance of PSAs have made them an indispensable part of food ingredients and cosmetics. PSA-based hydrogels have been extensively reviewed in biomedical applications. These hydrogels can be designed in different forms to show optimum performance. For instance, electroactive PSA-based hydrogels respond under an electric stimulus. Such performance can be served in stimulus drug release and determining cell fate. This review classifies and discusses the structure, properties, and applications of the most important polysaccharide-based electroactive hydrogels (agarose, alginate, chitosan, cellulose, and dextran) in medicine, focusing on their usage in tissue engineering, flexible electronics, and drug delivery applications.

Expanding the Repertoire of Electrospinning: New and Emerging Biopolymers, Techniques, and Applications

Electrospinning has emerged as a versatile and accessible technology for fabricating polymer fibers, particularly for biological applications. Natural polymers or biopolymers (including synthetically derivatized natural polymers) represent a promising alternative to synthetic polymers, as materials for electrospinning. Many biopolymers are obtained from abundant renewable sources, are biodegradable, and possess inherent biological functions. This review surveys recent literature reporting new fibers produced from emerging biopolymers, highlighting recent developments in the use of sulfated polymers (including carrageenans and glycosaminoglycans), tannin derivatives (condensed and hydrolyzed tannins, tannic acid), modified collagen, and extracellular matrix extracts. The proposed advantages of these biopolymer-based fibers, focusing on their biomedical applications, are also discussed to highlight the use of new and emerging biopolymers (or new modifications to well-established ones) to enhance or achieve new properties for electrospun fiber materials.

Characterization and Biocompatibility Properties In Vitro of Gel Beads Based on the Pectin and κ-Carrageenan

This study aimed to investigate the influence of kappa (κ)-carrageenan on the initial stages of the foreign body response against pectin gel. Pectin-carrageenan (P-Car) gel beads were prepared from the apple pectin and κ-carrageenan using gelling with calcium ions. The inclusion of 0.5% κ-carrageenan (Car0.5) in the 1.5 (P1.5) and 2% pectin (P2) gel formulations decreased the gel strength by 2.5 times. Car0.5 was found to increase the swelling of P2 gel beads in the cell culture medium. P2 gel beads adsorbed 30–42 mg/g of bovine serum albumin (BSA) depending on pH. P2-Car0.2, P2-Car0.5, and P1.5-Car0.5 beads reduced BSA adsorption by 3.1, 5.2, and 4.0 times compared to P2 beads, respectively, at pH 7. The P1.5-Car0.5 beads activated complement and induced the haemolysis less than gel beads of pure pectin. Moreover, P1.5-Car0.5 gel beads allowed less adhesion of mouse peritoneal macrophages, TNF-α production, and NF-κB activation than the pure pectin gel beads. There were no differences in TLR4 and ICAM-1 levels in macrophages treated with P and P-Car gel beads. P2-Car0.5 hydrogel demonstrated lower adhesion to serous membrane than P2 hydrogel. Thus, the data obtained indicate that the inclusion of κ-carrageenan in the apple pectin gel improves its biocompatibility.

Natural Biomaterials from Biodiversity for Healthcare Applications

Natural biomaterials originating during the growth cycles of all living organisms have been used for many applications. They span from bioinert to bioactive materials including bioinspired ones. As they exhibit an increasing degree of sophistication, natural biomaterials have proven suitable to address the needs of the healthcare sector. Here the different natural healthcare biomaterials, their biodiversity sources, properties, and promising healthcare applications are reviewed. The variability of their properties as a result of considered species and their habitat is also discussed. Finally, some limitations of natural biomaterials are discussed and possible future developments are provided as more natural biomaterials are yet to be discovered and studied.