Physical, mechanical and wound healing properties of chitosan/gelatin blend films containing tannic acid and/or bacterial nanocellulose

Synthesis and biological applications of nanocomposite hydrogels based on the methacrylation of hydroxypropyl methylcellulose and lignin loaded with alpha-pinene

Oral conditions, such as recurrent aphthous stomatitis, are chronic inflammatory disorders that significantly affect the life quality. This study aims to develop a novel buccal mucoadhesive based on methacrylate hydroxypropyl methylcellulose (M-HPMC) and methacrylate lignin (M-SLS) encapsulated with nanostructured lipid carriers (NLCs) for controlled release of alpha-pinene (α-pinene). NLCs with particle sizes of 152 ± 3 nm were prepared by using stearic acid and oleic acid as solid and liquid lipids, respectively. Following the successful synthesis of M-HPMC and M-SLS, various concentrations of α-pinene loaded NLCs (0, 18, 38, and 50 wt%) were encapsulated in M-HPMC/M-SLS hydrogel. It was demonstrated that the physiological and mechanical performances of hydrogels were changed, depending on the NLC content. Remarkably, the incorporation of 18 wt% NLC improved the compressive strength (143 ± 14 kPa) and toughness (17 ± 1 kJ/m3) of M-HPMC/M-SLS hydrogel. This nanocomposite hydrogel considerably decreased dissipated energy from 1.64 kJ/m3 to 0.99 kJ/m3, after a five-cycle compression test. The nanocomposite hydrogel exhibited controlled α-pinene release for up to 96 h which could significantly improve the antioxidant activity of M-HPMC/M-SLS matrix. Moreover, the reinforcing M-HPMC/M-SLS hydrogel with α-pinene-loaded NLCs resulted in increased adhesive strength (113.5 ± 7.5 kPa) to bovine buccal mucosa and cytocompatibility in contact with fibroblasts.

Comparative analysis of millet bran nanocelluloses with various morphologies: Revealing differences in the formation mechanism and structure characteristics

To investigate the differences of nanocelluloses with various morphologies, ammonium persulphate (APS) oxidation, H3PO4 dissolution and regeneration, and ball milling combined with 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) as a medium were applied to isolate cellulose nanocrystals (MCNCs), cellulose nanospheres (MCNSs) and cellulose fibrils (MCNFs) from millet bran. The structure, properties, and formation mechanism of three nanocelluloses were comparatively investigated by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, atomic force microscope, scanning electronic microscope, and emulsifying ability evaluation. MCNCs had needle-like structures due to the removal of amorphous regions, MCNFs appeared fibrous structures due to swelling and mechanical force, and MCNSs displayed spherical structures through self-assembly. MCNCs and MCNFs were confirmed to exhibit cellulose I structures with crystallinities of 61.24 % and 50.09 %, respectively. MCNSs showed the highest crystallinity of 68.41 % with a cellulose II structure. MCNFs and MCNSs exhibited higher initial decomposition temperatures, while MCNCs showed the highest residual mass. MCNFs suspension showed the highest apparent viscosity, while MCNSs suspension demonstrated superior dispersion. MCNSs-emulsion displayed the smallest droplet size, and MCNFs-emulsion exhibited the highest viscosity. This study reveals the formation mechanisms and relationship between morphologies and properties of three millet bran nanocelluloses, providing a theoretical basis for their application.

Tannin-encapsulated electrospun nanofibrous membrane of cellulose nanowhiskers-reinforced polysulfone for colorimetric detection of iron(III)

A nanocomposite of tannic acid and cellulose nanowhiskers (CNW)-reinforced polysulfone (PSF) was used to develop a metallochromic nanofibrous membrane sensor for iron(III) in aqueous media. Tannic acid was used as an active detecting probe, whereas the CNW@PSF composite was employed as a hosting material. Cellulose nanowhiskers (7-12 nm) were obtained from microcrystalline cellulose (MCC). According to the coloration parameters, a bathochromic shift from colorless (415 nm) to purple (561 nm) occurs when ferric cations bind to the phenolic hydroxyls of the tannic acid probe. The concentration of ferric was found to be directly correlated to the extent of the color change, demonstrating a detection limit of 0.1-250 ppm. This could be attributed to the creation of a coordinative complex between ferric ions and phenolic tannic acid. The generated nanofibers were inspected by energy-dispersive X-ray (EDX) and scanning electron microscopy (SEM). The electrospun nanofibrous membrane showed an average diameter between 75 and 150 nm. The tannic acid-containing nanofibers are remarkably reusable and simple. The tannic acid-encapsulated polysulfone nanofibrous membrane was used to detect various metal ions, demonstrating a high selectivity for Fe3+. The ideal pH range for the identification of Fe3+ was determined to be in the range of 4.25-6.75.

Fabrication of Thymol-loaded Isabgol/Konjac Glucomannan-based Microporous Scaffolds with Enriched Antioxidant and Antibacterial Properties for Skin Tissue Engineering Applications

An antioxidant, antibacterial, and biocompatible biomaterial is essential to repair skin wounds effectively. Here, we have employed two natural biopolymers, isabgol (ISAB) and konjac glucomannan (KGM), to prepare microporous scaffolds by freezing and lyophilization. The scaffolds are loaded with thymol (THY) to impart potent antioxidant and antibacterial activities. The physicochemical properties of the ISAB+KGM+THY scaffold, like porosity (41.8±2.4 %), swelling, and biodegradation, were optimal for tissue regeneration application. Compared to the control, ISAB+KGM+THY scaffolds promote attachment, migration, and proliferation of L929 fibroblasts. The antioxidant activity of the ISAB+KGM+THY scaffold was significantly improved after loading THY. This would protect the tissues from oxidative damage. The antibacterial activity of the ISAB+KGM+THY scaffold was significantly higher than that of the control, which would help prevent bacterial infection. The vascularization ability of the ISAB+KGM scaffold was not altered by incorporating THY in the ISAB+KGM scaffold. Therefore, a strong antioxidant, antibacterial, and biocompatible nature of the ISAB+KGM+THY scaffold could be useful for various biomedical applications.

Chia gum-gelatin-based encapsulation of chia sprouts phenolic compounds enhanced storage stability, bioavailability, antioxidant, antidiabetic, and antibacterial properties

Chia seeds are currently gaining popularity as functional and healthy foods. The developed chia 7-day sprout phenolic extract (CSP) is an abundant supply of highly concentrated antioxidant phenolic compounds with health-promoting and antibacterial properties. The easy destruction against different environmental changes and low bioavailability of these phenolic compounds are the main limitations of their applications/utilization. This study aims to microencapsulate the phenolic compounds of developed CSP for use as valuable functional food additives. Three microcapsules were prepared using coating materials, chia gum (CG), gelatin (G), and their mixture (CG/G) via the freeze-drying technique. The prepared CG-, CG/G-, and G-microcapsules demonstrated high encapsulation efficiency percentages of 97.0, 98.1, and 94.5%, respectively. They retained most of the CSP-phenolics (91.4-97.2%) and increased total antioxidant activity (108-127.1%). The prepared microcapsules released more CSP-phenolic compounds into the simulated intestinal stage (70-82%) than the gastric stage (15-24%), demonstrating that the coating materials enhance protection during the gastric stage. The produced microcapsules exhibited higher storage stability at 40 °C for 60 days than the non-capsulated CSP, indicating that the encapsulation provided enhanced stability. The prepared microcapsules microstructures showed uniform, smoother surfaces, and hidden micropores compared to their coating material microstructures. In addition, the connection between the functional groups of coating materials and CSP-phenolic compounds was demonstrated by FTIR analysis. The prepared CG-, CG/G-, and G-microcapsules can perfectly inhibit the α-amylase and α-glucosidase activities by 65, 68, 60 and 74, 78, and 70%, respectively, compared to CSP (54, and 66%). The three prepared microcapsules displayed better antibacterial with low MBC values (0.36-0.68 mg ml-1) compared to CSP (0.53-0.74 mg ml-1). The prepared CSP microcapsules can be incorporated into various food products to enhance their antioxidant, antidiabetic, and antibacterial properties.

Tannic acid-reinforced soy protein/oxidized tragacanth gum-based multifunctional hemostatic film for regulation of wound healing

With recent advances in the field of tissue engineering, composite films with biocompatibility, antimicrobial properties, and wound healing properties have gained potential applications in the field of wound dressings. In this research work, composite films of soy protein (S)/oxidized tragacanth gum (G) were successfully made using the solution casting process. The metal-organic framework containing curcumin (MOF) with concentrations of 5 and 10 wt% and tannic acid (TA) with concentrations of 6 and 12 wt% were entered into the polymer film. Surface morphology with scanning electron microscope (FE-SEM), thermal stability, mechanical properties, chemical structure, antioxidant, water absorption, cell viability, antibacterial activity, and biodegradability of the prepared films were investigated in laboratory conditions. In addition, the toxicity of the films in the cell environment was investigated, and the results showed that cell growth and proliferation improved in the presence of the prepared films, especially films SG/MOF10/TA6 and SG/MOF10/TA12 due to the presence of TA and MOF containing curcumin. Also, the antibacterial activity of the films showed that the presence of tannic acid and curcumin in the structure of the films increases their ability against pathogens. According to the obtained results, the newly produced nanocomposite film (SG/MOF10/TA12) has a high potential to be used for wound dressing due to its favorable characteristics and was considered the optimal film.

Versatile and durable polyvinyl alcohol/alginate/gelatin/quaternary ammonium chitosan/Fe3O4 particles hybrid hydrogel beads: adsorption capabilities for cleaning pollutants

A novel hybrid hydrogel bead (HHBFe) composed of polyvinyl alcohol/sodium alginate/gelatin/quaternary ammonium chitosan (PVA/GA/SA/QCS) and Fe3O4 magnetic nanoparticles was developed through green cross-linking of Ca2+ and tannic acid (TA) combined freeze-thaw method. HHBFe exhibited a good spherical shape, porosity, magnetic properties, and excellent mechanical properties and durability. The adsorption capacity of HHB and HHBFe towards methyl orange (MO), tetracycline (Tc), and Cr (VI) was systematically studied and compared. Results revealed similar adsorption capacities for MO and Cr (VI) between HHB and HHBFe, while the presence of Fe3O4 significantly enhanced Tc adsorption, indicating the versatile adsorption functions of HHBFe. Adsorption kinetic followed the pseudo-second-order model, with external diffusion and intra-particle diffusion controlling process. The adsorption data were consistent with the Langmuir isothermal adsorption model, indicating predominantly monolayer adsorption of pollutants by beads. Notably, the beads exhibited easily regenerated, maintaining 60 % of initial adsorption capacity after 5 cycles, particularly for Tc and Cr (VI). The good adsorption performance of HHBFe can be attributed to the strong interaction between their multi-functional groups including phenolic hydroxyl groups, carboxyl groups, amino groups, etc., and pollutant molecules. The multifunctional HHBFe beads prepared in this study and the results obtained with three completely different types of pollutants provide reliability support for their use in different wastewater treatment fields and even in the field of drug carriers.

Synthesis of biocompatible hydrogel of alginate-chitosan enriched with iron sulfide nanocrystals

This work aimed to synthesize and characterize a biocompatible hydrogel of alginate and chitosan enriched with iron sulfide nanocrystals. Three concentrations of iron sulfide nanocrystals (FeS2NCs) 0.03905, 0.0781, and 0.2343 mg/ml were used. Gel swelling was determined using phosphate-buffered saline solution at 1, 2, 4, 6, 24, 48, and 72 h. The microstructure, the morphology, and the elastic strength were determined by optical microscopy, scanning electron microscopy, and rheological studies, respectively. The functional groups were identified through Fourier Transform Infrared spectroscopy. Biocompatibility was determined in a murine model; after seven days of subdermal inoculation, histological sections stained with H&E were analyzed, and then histopathological features were evaluated. All the compounds obtained showed a loss modulus lower than the storage modulus. The 0.2343 mg/ml FeS2NCs hydrogel showed higher swelling than the control. In the in vivo evaluation, no adverse effects were found. The presence of FeS2NCs was well tolerated in the subcutaneous tissue of mice, according to histopathological analysis. The hydrogels synthesized with added FeS2NCs demonstrate a swelling ratio of 150 %, rheologically exhibiting gel-like behavior rather than viscous liquids. Furthermore, they did not present any adverse effects on the subcutaneous tissue.

Chitosan, gelatin and pectin based bionanocomposite films with rosemary essential oil as an active ingredient for future foods

Bionanocomposite films of three biopolymers including chitosan, gelatin, and pectin incorporated with rosemary essential oil (REO) were developed and characterized in terms of their physical, structural, mechanical, morphological, antioxidant, and antimicrobial properties. Incorporation of REO showed an increased hydrophobic nature thus, improved water vapor transmission rate (WVTR), tensile strength (TS), elongation-at-break (EAB), and thermal stability significantly (P ≤ 0.05) as compared to the control films. The addition of REO leads to more opaque films with relatively increased microstructural heterogeneity, resulting in an increase in film opacity. Fourier transform infrared spectroscopy (FTIR) and particle size revealed that REO incorporation exhibits high physicochemical stability in chitosan, gelatin, and pectin bionanocomposite films. Incorporation of REO exhibited the highest inhibitory activity against the tested pathogenic strains (Bacillus subtilis and Escherichia coli). Furthermore, the addition of REO increased the inhibitory activity of films against ABTS and DPPH free radicals. Therefore, chitosan, gelatin, and pectin-based bionanocomposite films containing REO as food packaging could act as a potential barrier to extending food shelf life.

Antibacterial adhesive based on oxidized tannic acid-chitosan for rapid hemostasis

Currently, bacterial infections and bleeding interfere with wound healing, and multifunctional hydrogels with appropriate blood homeostasis, skin adhesion, and antibacterial activity are desirable. In this study, chitosan-based hydrogels were synthesized using oxidized tannic acid (OTA) and Fe3+ as cross-linkers (CS-OTA-Fe) by forming covalent, non-covalent, and metal coordination bonds between Fe3+ and OTA. Our results demonstrated that CS-OTA-Fe hydrogels showed antibacterial properties against Gram-positive bacteria (Staphylococcus aureus)and Gram-negative bacteria (Escherichia coli), low hemolysis rate (< 2 %), rapid blood clotting ability, in vitro (< 2 min), and in vivo (90 s) in mouse liver bleeding. Additionally, increasing the chitosan concentration from 3 wt% to 4.5 wt% enhanced cross-linking in the network, leading to a significant improvement in the strength (from 106 ± 8 kPa to 168 ± 12 kPa) and compressive modulus (from 50 ± 9 kPa to 102 ± 14 kPa) of hydrogels. Moreover, CS-OTA-Fe hydrogels revealed significant adhesive strength (87 ± 8 kPa) to the cow's skin tissue and cytocompatibility against L929 fibroblasts. Overall, multifunctional CS-OTA-Fe hydrogels with tunable mechanical properties, excellent tissue adhesive, self-healing ability, good cytocompatibility, and fast hemostasis and antibacterial properties could be promising candidates for biomedical applications.

Chitosan catechol-tannic acid composite hydrogel and cryogel with antimicrobial and hemostatic properties

Hydrogels containing catechol group have received attention in the biomedical field due to their robust adhesive/cohesive capabilities, biocompatibility, and hemostatic abilities. Catechol-functionalized chitosan holds promise for preparing self-assembly hydrogels. However, issues of inefficient gelation and instability still persist in these hydrogels. In the current study, we synthesized chitosan catechol (CC) of high catechol substitution (∼28 %) and combined CC with tannic acid (TA, which also contains catechol) to form self-healing CC-TA hydrogels. The catechol-enriched CC-TA composite hydrogels showed rapid gelation and mechanical reinforcement (shear modulus ∼110 Pa). In situ coherent small-angle X-ray scattering (SAXS) coupled with rheometry revealed a morphological feature of mesoscale clusters (∼20 nm) within CC-TA hydrogel. The clusters underwent dynamic destruction under large-amplitude oscillatory shear, corresponding with the strain-dependent and self-healing behavior of the CC-TA hydrogel. The composite hydrogel had osmotic-responsive and notable adhesive properties. Meanwhile, CC-TA composite cryogel prepared simply through freeze-thawing procedures exhibited distinctive macroporous structure (∼200 μm), high water swelling ratio (∼7000 %), and favorable compressive modulus (∼8 kPa). The sponge-like cryogel was fabricated into swabs, demonstrating hemostatic capacity. The CC-TA composites, in both hydrogel and cryogel forms, possessed ROS scavenging ability, antimicrobial activity, and cell compatibility with potentials in biological applications.

Therapeutic Potential of Nanocarrier Mediated Delivery of Peptides for Wound Healing: Current Status, Challenges and Future Prospective

Wound healing presents a complex physiological process that involves a sequence of events orchestrated by various cellular and molecular mechanisms. In recent years, there has been growing interest in leveraging nanomaterials and peptides to enhance wound healing outcomes. Nanocarriers offer unique properties such as high surface area-to-volume ratio, tunable physicochemical characteristics, and the ability to deliver therapeutic agents in a controlled manner. Similarly, peptides, with their diverse biological activities and low immunogenicity, hold great promise as therapeutics in wound healing applications. In this review, authors explore the potential of peptides as bioactive components in wound healing formulations, focusing on their antimicrobial, anti-inflammatory, and pro-regenerative properties. Despite the significant progress made in this field, several challenges remain, including the need for standardized characterization methods, optimization of biocompatibility and safety profiles, and translation from bench to bedside. Furthermore, developing multifunctional nanomaterial-peptide hybrid systems represents promising avenues for future research. Overall, the integration of nanomaterials made up of natural or synthetic polymers with peptide-based formulations holds tremendous therapeutic potential in advancing the field of wound healing and improving clinical outcomes for patients with acute and chronic wounds.

Biopolymer based nanoparticles and their therapeutic potential in wound healing - A review

Nanoparticles (NPs) have been extensively investigated for their potential in nanomedicine. There is a significant level of enthusiasm about the potential of NPs to bring out a transformative impact on modern healthcare. NPs can serve as effective wound dressings or delivery vehicles due to their antibacterial and pro-wound-healing properties. Biopolymer-based NPs can be manufactured using various food-grade biopolymers, such as proteins, polysaccharides, and synthetic polymers, each offering distinct properties suitable for different applications which include collagen, polycaprolactone, chitosan, alginate, and polylactic acid, etc. Their biodegradable and biocompatible nature renders them ideal nanomaterials for applications in wound healing. Additionally, the nanofibers containing biopolymer-based NPs have shown excellent anti-bacterial and wound healing activity like silver NPs. These NPs represent a paradigm shift in wound healing therapies, offering targeted and personalized solutions for enhanced tissue regeneration and accelerated wound closure. The current review focuses on biopolymer NPs with their applications in wound healing.

Release kinetic modeling of Satureja Khuzestanica Jamzad essential oil from fish gelatin/succinic anhydride starch nanocomposite films: The effects of temperature and nanocellulose concentration

Fish gelatin (FG) and octenyl succinic anhydride starch (OSAS) composite films loaded with 1, 2, 3 and 4 wt% bacterial nanocellulose (BNC) and Satureja Khuzestanica Jamzad essential oil (SKEO) were achieved successfully and their physicochemical and release properties were investigated. The results revealed that incorporation of BNC improved the tensile strength which was associated with FE-SEM, FTIR and XRD. Moreover, this study focused on the release modeling of SKEO in 4, 25 and 37 °C from nanocomposite films using different release kinetic and Arrhenius models. Also, analysis of variance-simultaneous component analysis (ASCA) and exploratory data visualization by principal component analysis (PCA) were carried out to investigate the effects of two controlled factors. Consequently, the Peleg model showed the best fitting of experimental data. The activation energies decreased by increasing the BNC concentration. This research demonstrated the nanocomposite film containing SKEO would be a suitable candidate for active food packaging.

Nanocellulose-Based Hybrid Scaffolds for Skin and Bone Tissue Engineering: A 10-Year Overview

Cellulose, the most abundant polymer on Earth, has been widely utilized in its nanoform due to its excellent properties, finding applications across various scientific fields. As the demand for nanocellulose continues to rise and its ease of use becomes apparent, there has been a significant increase in research publications centered on this biomaterial. Nanocellulose, in its different forms, has shown tremendous promise as a tissue engineered scaffold for regeneration and repair. Particularly, nanocellulose-based composites and scaffolds have emerged as highly demanding materials for both soft and hard tissue engineering. Medical practitioners have traditionally relied on collagen and its analogue, gelatin, for treating tissue damage. However, the limited mechanical strength of these biopolymers restricts their direct use in various applications. This issue can be overcome by making hybrids of these biopolymers with nanocellulose. This review presents a comprehensive analysis of the recent and most relevant publications focusing on hybrid composites of collagen and gelatin with a specific emphasis on their combination with nanocellulose. While bone and skin tissue engineering represents two areas where a majority of researchers are concentrating their efforts, this review highlights the use of nanocellulose-based hybrids in these contexts.

A preliminary study of cutaneous wound healing on the upper eyelid in a small Brazilian population using Rhizophora mangle-based cream

Plants used in traditional medicine offer an affordable new alternative in tissue repair therapy. This study aimed to evaluate the effectiveness of the 5% Rhizophora mangle cream compared to the 5% dexpanthenol cream in healing open surgical wounds on the upper eyelid. A total of 18 patients were submitted to the experiment and divided into 2 groups with 9 patients each who used topically and daily 5% dexpanthenol cream (control group) or 5% R.mangle cream (intervention group) for 7 days. Clinical, morphometric and histomorphometric analyses of wounds and surgical procedures for skin removal were performed. In the morphometric analysis, all wounds treated with R.mangle and dexpanthenol creams showed complete macroscopic scars, without inflammatory signs and infection free. The skin hydration values in pre and post application periods of the cream were 43.82 ± 43.93 and 62.12 ± 67.40 respectively. The histomorphometric study showed lower values of epithelium distance in R. mangle group and higher in dexpanthenol group with significant difference between groups (p < 0.05). The R.mangle 5% cream proved to be effective in healing wounds of human upper eyelid skin with a significant improvement in epithelization compared to dexpanthenol 5% cream.

Advancements in wound healing: integrating biomolecules, drug delivery carriers, and targeted therapeutics for enhanced tissue repair

Wound healing, a critical biological process vital for tissue restoration, has spurred a global market exceeding $15 billion for wound care products and $12 billion for scar treatment. Chronic wounds lead to delayed or impaired wound healing. Natural bioactive compounds, prized for minimal side effects, stand out as promising candidates for effective wound healing. In response, researchers are turning to nanotechnology, employing the encapsulation of these agents into drug delivery carriers. Drug delivery system will play a crucial role in enabling targeted delivery of therapeutic agents to promote tissue regeneration and address underlying issues such as inflammation, infection, and impaired angiogenesis in chronic wound healing. Drug delivery carriers offer distinct advantages, exhibiting a substantial ratio of surface area to volume and altered physical and chemical properties. These carriers facilitate sustained and controlled release, proving particularly advantageous for the extended process of wound healing, that typically comprise a diverse range of components, integrating both natural and synthetic polymers. Additionally, they often incorporate bioactive molecules. Despite their properties, including poor solubility, rapid degradation, and limited bioavailability, various natural bioactive agents face challenges in clinical applications. With a global research, emphasis on harnessing nanomaterial for wound healing application, this research overview engages advancing drug delivery technologies to augment the effectiveness of tissue regeneration using bioactive molecules. Recent progress in drug delivery has poised to enhance the therapeutic efficacy of natural compounds in wound healing applications.

Construction of chitosan-gelatin polysaccharide-protein composite hydrogel via mechanical stretching and its biocompatibility in vivo

Natural polysaccharides and protein macromolecules are the important components of extracellular matrix (ECM), but individual component generally exhibits weak mechanical property, limited biological function or strong immunogenicity in tissue engineering. Herein, gelatin (Gel) was deposited to the stretched (65 %) chitosan (CS) hydrogel substrates to fabricate the polysaccharide-protein CS-Gel-65 % composite hydrogels to mimic the natural component of ECM and improve the above deficiencies. CS hydrogel substrates under different stretching deformations exhibited tunable morphology, chemical property and wettability, having a vital influence on the secondary structures of deposited fibrous Gel protein, namely appearing with the decreased β-sheet content in stretched CS hydrogel. Gel also produced a more homogenous distribution on the stretched CS hydrogel substrate due to the unfolding of Gel and increased interactions between Gel and CS than on the unstretched substrate. Moreover, the polysaccharide-protein composite hydrogel possessed enhanced mechanical property and oriented structure via stretching-drying method. Besides, in vivo subcutaneous implantation indicated that the CS-Gel-65 % composite hydrogel showed lower immunogenicity, thinner fibrous capsule, better angiogenesis effect and increased M2/M1 of macrophage phenotype. Polysaccharide-protein CS-Gel-65 % composite hydrogel offers a novel material as a tissue engineering scaffold, which could promote angiogenesis and build a good immune microenvironment for the damaged tissue repair.

Preparation, Characterization, and Evaluation of Enzyme Co-Modified Fish Gelatin-Based Antibacterial Derivatives

Fish gelatin (FG)-based wound dressings exhibit superior water absorption capacity, thermal stability, and gelation properties, which enhance the performance of these dressings. In this study, our objective was to investigate the conditions underlying the enzymatic hydrolysis of FG and subsequent cross-linking to prepare high-performance gels. A two-step enzymatic method of protease-catalyzed hydrolysis followed by glutamine transglutaminase (TGase)-catalyzed cross-linking was used to prepare novel high-performance fish gelatin derivatives with more stable dispersion characteristics than those of natural gelatin derivatives. Compared with conventional TGase cross-linked derivatives, the novel derivatives were characterized by an average pore size of 150 μm and increased water solubility (423.06% to 915.55%), water retention (by 3.6-fold to 43.89%), thermal stability (from 313 °C to 323 °C), and water vapor transmission rate, which reached 486.72 g·m-2·24 h-1. In addition, loading glucose oxidase onto the fish gelatin derivatives increased their antibacterial efficacy to >99% against Escherichia coli and Staphylococcus aureus.

Progress on green crosslinking of polysaccharide hydrogels for drug delivery and tissue engineering applications

Natural polysaccharides are being studied for their biocompatibility, biodegradability, low toxicity, and low cost in the fabrication of various hydrogel devices. However, due to their insufficient physicochemical and mechanical qualities, polysaccharide hydrogels alone are not acceptable for biological applications. Various synthetic crosslinkers have been tested to overcome the drawbacks of standalone polysaccharide hydrogels; however, the presence of toxic residual crosslinkers, the generation of toxic by-products following biodegradation, and the requirement of toxic organic solvents for processing pose challenges in achieving the desired non-toxic biomaterials. Natural crosslinkers such as citric acid, tannic acid, vanillin, gallic acid, ferulic acid, proanthocyanidins, phytic acid, squaric acid, and epigallocatechin have been used to generate polysaccharide-based hydrogels in recent years. Various polysaccharides, including cellulose, alginate, pectin, hyaluronic acid, and chitosan, have been hydrogelized and investigated for their potential in drug delivery and tissue engineering applications using natural crosslinkers. We attempted to provide an overview of the synthesis of polysaccharide-based hydrogel systems (films, complex nanoparticles, microspheres, and porous scaffolds) based on green crosslinkers, as well as a description of the mechanism of crosslinking and properties with a special emphasis on drug delivery, and tissue engineering applications.

Tannic acid-enriched nanocellulose hydrogels improve physical and oxidative stability of high-internal-phase Pickering emulsions

A cellulose suspension and tannic acid (TA) were co-sonicated to prepare TA-incorporated nanocellulose hydrogels with the aim of improving the physical and oxidative stability of high-internal-phase emulsions (HIPEs). Cellulose nanocrystal (CNC) hydrogels were used to stabilize HIPEs, relying on the interfacial adsorption behavior of CNCs and the reversible gelation properties of hydrogels. TA was incorporated due to its ability to improve emulsification performance and antioxidant properties. Introducing TA enhanced the gel strength of hydrogels by decreasing the interfibrillar distance. The utilization of CNC-TA hydrogels effectively improved physical properties of HIPEs. This improvement included a reduction in droplet size from the initial 103.41 μm to 39.66 μm, an enhancement of the gel structure, and an improvement in storage stability. A denser and orderly interfacial structure was formed in CNCs-TA hydrogel stabilized HIPEs due to anchoring TA at the interface driven by the hydrogen-bonding interaction between CNCs and TA. This densely interfacial layer with good antioxidant activity markedly enhanced the oxidative stability of emulsions, as evidenced by the low level of oxidation products in HIPEs. This study has the potential to extend the utilization of CNC-stabilized emulsions to new applications in the food, cosmetic, and pharmaceutical industries.

Characterization of gelatin-based wound dressing biomaterials containing increasing coconut oil concentrations

This study determined the influence and ideal ratios of various coconut oil (CO) amounts in gelatin (G) based-films as wound dressings since there are limited comparative studies to evaluate the sole effect of increasing CO on protein-based biomaterials. Homogenous films at G:CO ratio of 4:0,4:2,4:3,4:4 (w:w) corresponding to CO-0, CO-2, CO-3, CO-4, respectively, were obtained using solution casting. SEM showed CO caused rougher surfaces decreasing mechanical strength. However, no pores were observed in CO-4 due to bigger clusters of oil improving stretchability compared to CO-3; and durability since aging of CO-4 was >10% lower than CO-0 in aqueous media. FTIR showed triglycerides' band only in CO films with increasing amplitude. Moreover, amide-I of CO-2 was involved in more hydrogen bonding, therefore, CO-2 had the highest melt-like transition temperatures (Tmax) at ∼163 °C while others' were at ∼133 °C; and had more ideal mechanical properties among CO films. XTT showed that increased CO improved 3T3 cell viability as CO-0 significantly decreased viability at 10,50,75,100 μg/mL (p < 0.05), whereas CO-2 and CO-3 within 5-75 μg/mL and CO-4 within 5-100 μg/mL range increased viability ≥100% suggesting proliferation. All CO samples at 25 μg/mL stimulated 3T3 cell migration in Scratch Assay indicating wound healing. CO amounts mainly improved thermal and healing properties of gelatin-based biomaterial. CO-2 was more thermally stable and CO-4 had better influence on cell viability and wound healing than CO-0. Therefore, increased CO ratios, specifically 4:2 and 4:4, G:CO (w:w), in gelatin-based films can be ideal candidates for wound dressing materials.

An Insight into Biodegradable Polymers and their Biomedical Applications for Wound Healing

Biodegradable polymers, encompassing both natural and synthetic polymers, have demonstrated efficacy as carriers for synthetic drugs, natural bioactive molecules, and inorganic metals. This is due to their ability to control the release of these substances. As a result, various advanced materials, such as nanoparticle- loaded hydrogels, nanofibrous scaffolds, and nanocomposites, have been developed. These materials have shown promise in enhancing processes, such as cell proliferation, vascular angiogenesis, hair growth, and wound healing management. Natural polymers, including hyaluronic acid, collagen, chitosan, gelatin, and alginate, as well as synthetic polymers like polylactic acid, polyglycolic acid, polylactic co-glycolic acid, and PCA, have significant potential for promoting wound healing. This study examines the advancements in biodegradable polymers for wound healing, specifically focusing on each polymer and its distinctive formulations. It also discusses the in vitro experiments conducted using different cell lines, as well as the in vivo studies that explore the numerous uses of these polymers in wound healing. The discussion also included the exploration of modifications or combinations of several polymers, as well as surface changes, in order to produce synergistic effects and address the limitations of individual polymers. The goal was to expedite the healing process of different chronic wounds. Due to this, there have been notable advancements in the technological use of polymeric mixes, including biodegradable polymer-based scaffolds, which have accelerated the process of wound healing.

A novel multifunctional chitosan-gelatin/carboxymethyl cellulose-alginate bilayer hydrogel containing human placenta extract for accelerating full-thickness wound healing

The replication of skin's dermal and epidermal morphology within a full-thickness wound using a bi-layer hydrogel to cater to their distinct needs is a compelling pursuit. Moreover, human placenta extract (HPE), containing a diverse array of bioactive agents, has proven to be effective in promoting the wound healing process and enhancing epidermal keratinocytes. This study presents a multifunctional bi-layer hydrogel incorporating HPE for accelerating full-thickness wound healing through sustained HPE release, inhibition of bacteria invasion, and promotion of cell proliferation. The upper layer of the scaffold, known as the dressing layer, is composed of carboxymethyl cellulose and sodium alginate, serving as a supportive layer for cell proliferation. The under layer, referred to as the regenerative layer, is composed of chitosan and gelatin, providing an extracellular matrix-like, porous, moist, and antibacterial environment for cell growth. The scaffold was optimized to replicate the morphology of the dermal and epidermal layers, with suitable fibroblast infiltration and a pore size of approximately 283μm. Furthermore, the degradation rate of the samples matched the wound healing rate and persisted throughout this period. The sustained HPE release rate, facilitated by the degradation rate, was optimized to reach ~98% after 28 days, covering the entire healing period. The samples demonstrated robust antibacterial capabilities, with bacterial inhibition zone diameters of and 2.63±0.12cm for S. aureus and E. coli, respectively. The biocompatibility of the samples remained at approximately 68.33±4.5% after 21 days of fibroblast cell culture. The in vivo experiment indicated that the HPE@Bilayer hydrogel promotes the formation of new blood vessels and fibroblasts during the early stages of healing, leading to the appropriate formation of granulation tissue and a wound contraction rate of (79.31±3.1)%. Additionally, it resulted in the formation of a thick epidermal layer (keratinization) that effectively covered all the impaired areas, achieving a wound contraction rate of 95.83±6.3% at the late stage of wound healing. Furthermore, immunohistochemistry staining for CD31 and TGF-β revealed that the HPE@Bilayer group had 22 blood vessels/field and 34%-66% immunoactive cells, respectively, after 14 days of healing. However, by day 21, angiogenesis and TGF-β expression had declined, demonstrating that the wounds had been successfully treated with minimal scarring.

Bandage modified with antibacterial films of quaternized chitosan & sodium carboxymethyl cellulose microgels/baicalein nanoparticles for accelerating infected wound healing

Wound dressings capable of sterilizing pathogenic bacteria and scavenging free radicals are important to inhibit bacterial invasion and accelerate wound healing. The target of this work is to develop an antibacterial dressing by modifying bandages with films composed of biological macromolecule microgels and baicalein@tannic acid (Bai@TA) nanoparticles (NPs). Firstly, hydrophobic Bai was made into water soluble Bai@TA NPs using a solvent exchange method with TA as stabilizer. Polymeric microgels of sodium carboxymethyl cellulose (CMC)&hydroxypropyltrimethyl ammonium chloride chitosan (HACC) were then prepared by a simple blending method. Further, CMC&HACC/Bai@TA multilayer films were deposited on medical bandages by using a layer-by-layer assembly technique to obtain an antibacterial dressing. The as-prepared dressings showed great antibacterial ability against E. coli, S. aureus and methicillin resistant Staphylococcus aureus (MRSA), excellent antioxidant activity and good biological safety. In addition, compared to conventional medical bandages, the dressings could efficaciously diminish inflammation in the wound, accelerate skin regeneration and functional restoration, and promote the in vivo healing speed of full-thickness skin wounds infected by MRSA. We believe that as a low-cost but effective wound dressing, the antibacterial bandage modified with CMC&HACC/Bai@TA films has potentials to replace traditional dressings in the clinical management of infected wounds.

Influence of blending and layer-by-layer assembly methods on chitosan-gelatin composite films enriched with curcumin nanoemulsion

In this study, gelatin (GE) was composited with chitosan films (CH) and chitosan films incorporated with curcumin nanoemulsion (CH-CNE) through blending and layer-by-layer (LbL) assembly in order to overcome the physical limitations of the chitosan and its incorporated films. Furthermore, the distinctive effects of blending and LbL assembly on the physicochemical parameters of the composite films were assessed. The composite LbL films incorporated with GE exhibited improvement of water vapor barrier, tensile strength, solubility, which contributed to the enhanced antioxidant activity from the single components. By contrast, the composite films of the blending method exhibited greater elongation at break and increased swelling degree. Additionally, the films containing the nanoemulsion exhibited reduced light transmission and increased opacity. The thermal properties indicating the thermal stability and compatibility interactions of the composite films were examined by the glass transition temperature (Tg). Results revealed that the distinctive behavior of the Tg was affected by the compositing method. The LbL films exhibited substantially increased Tg, indicating enhanced thermal stability. The results indicated that the composited films formed via the LbL assembly attained better physicochemical properties and thermal stability, implying higher compatible film than the blending.

Physical dual-network photothermal antibacterial multifunctional hydrogel adhesive for wound healing of drug-resistant bacterial infections synthesized from natural polysaccharides

Wound-healing of drug-resistant bacterial infections has always been a clinical challenge. The design and development of effective and economically safe wound dressings with antimicrobial activity and healing-promoting properties is highly desirable, especially in the context of wound-infections. Herein, we designed a physical dual-network multifunctional hydrogel adhesive based on polysaccharide material for the treatment of full-thickness skin defects infected with multidrug-resistant bacteria. The hydrogel utilized ureido-pyrimidinone (UPy)-modified Bletilla striata polysaccharide (BSP) as the first physical interpenetrating network for providing some brittleness and rigidity; and then branched macromolecules formed after cross-linking Fe³⁺ with dopamine-conjugated di-aldehyde-hyaluronic acid as the second physical interpenetrating network for providing some flexibility and elasticity. In this system, BSP and hyaluronic acid (HA) are used as synthetic matrix materials to provide strong biocompatibility and wound-healing ability. In addition, ligand cross-linking of catechol-Fe³⁺ and quadrupole hydrogen-bonding cross-linking of UPy-dimer can form a highly dynamic physical dual-network structure, which imparts good rapid self-healing, injectability, shape-adaptation, NIR/pH responsiveness, high tissue-adhesion and mechanical properties of this hydrogel. Meanwhile, bioactivity experiments demonstrated that the hydrogel also possesses powerful antioxidant, hemostatic, photothermal-antibacterial and wound-healing effects. In conclusion, this functionalized hydrogel is a promising candidate for clinical treatment of full-thickness bacteria-stained wound dressing materials.

Carbon dots, cellulose nanofiber, and essential oil from Torreya grandis aril added to fish scale gelatin film for tomato preservation

In this study, carbon dots (CDs), cellulose nanofibers (CNF) and essential oil nanoemulsion (EON) were extracted from the aril waste of Torreya grandis following nuts production. These three nanomaterials were formulated for the preparation of a composite film to be employed for postharvest tomato storage. Visual, microscopical and physicochemical properties of the prepared nanocomposite films were analyzed at different levels of CDs and CNF for optimization purposes. The UV absorption and antioxidant capacity of gelatin film with 10 % CDs (G/10CD) were enhanced compared with gelatin (G) film, concurrent with a reduction in water barrier capacity, water contact angle (WCA) and tensile strength (TS). Compared with G/10CD film, the WCA of gelatin film after incorporation of 10 % CDs and 3 % CNF (G/10CD/3CNF) was significantly increased by 14.5°at 55 s. In contrast, TS increased by 1.26 MPa, as well as the significant enhancement in water barrier capacity. The above composite film mixed with NEO (G/10CD/3CNF/EON) exerted further antimicrobial effects against Escherichia coli. G/10CD/3CNF/EON coating effectively extended tomato shift life compared with the control group. Therefore, this new eco-friendly film presents several advantages of biodegradability, sustainability as well as multifunctional properties posing it as potential packaging material for food applications.

Agaricus blazei Murill extract-loaded in alginate/poly(vinyl alcohol) films prepared by Ca2+ cross-linking for wound healing applications

This work aimed the development and evaluation of the wound healing activity of films based on sodium alginate, polyvinyl alcohol (PVA) and Ca²⁺ loaded with Agaricus blazei Murill hydroalcoholic extract (AbE). Firstly, AbE was prepared using a previously standardized methodology. The films were prepared by casting technique and cross-linked with Ca²⁺ using CaCl₂ as cross-linking agent. The physicochemical, morphological and water vapor barrier properties of the films were analyzed and the pre-clinical efficacy was investigated against the cutaneous wound model in mice. The films showed barrier properties to water vapor promising for wound healing. AbE showed physical and chemical interactions between both polymers, noticed by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermal analysis. The delivery of AbE in alginate/PVA films enhanced the antioxidant and wound healing properties of these polymers. Consequently, a reduction of malondialdehyde levels was observed, as well as an increase of the epidermis/dermis thickness and enhancement in collagen I deposition. Thus, these formulations are promising biomaterials for wound care and tissue repairing.

Recent Development of Nanomaterials for Transdermal Drug Delivery

Nano-engineered medical products first appeared in the last decade. The current research in this area focuses on developing safe drugs with minimal adverse effects associated with the pharmacologically active cargo. Transdermal drug delivery, an alternative to oral administration, offers patient convenience, avoids first-pass hepatic metabolism, provides local targeting, and reduces effective drug toxicities. Nanomaterials provide alternatives to conventional transdermal drug delivery including patches, gels, sprays, and lotions, but it is crucial to understand the transport mechanisms involved. This article reviews the recent research trends in transdermal drug delivery and emphasizes the mechanisms and nano-formulations currently in vogue.

Sustainable Nanomaterials for Biomedical Applications

Significant progress in nanotechnology has enormously contributed to the design and development of innovative products that have transformed societal challenges related to energy, information technology, the environment, and health. A large portion of the nanomaterials developed for such applications is currently highly dependent on energy-intensive manufacturing processes and non-renewable resources. In addition, there is a considerable lag between the rapid growth in the innovation/discovery of such unsustainable nanomaterials and their effects on the environment, human health, and climate in the long term. Therefore, there is an urgent need to design nanomaterials sustainably using renewable and natural resources with minimal impact on society. Integrating sustainability with nanotechnology can support the manufacturing of sustainable nanomaterials with optimized performance. This short review discusses challenges and a framework for designing high-performance sustainable nanomaterials. We briefly summarize the recent advances in producing sustainable nanomaterials from sustainable and natural resources and their use for various biomedical applications such as biosensing, bioimaging, drug delivery, and tissue engineering. Additionally, we provide future perspectives into the design guidelines for fabricating high-performance sustainable nanomaterials for medical applications.

Curcumin-Loaded Bioactive Polymer Composite Film of PVA/Gelatin/Tannic Acid Downregulates the Pro-inflammatory Cytokines to Expedite Healing of Full-Thickness Wounds

Curcumin (Cur) entrapped poly(vinyl alcohol) (PVA)/gelatin composite films were prepared by cross-linking with tannic acid (TA) as bioactive dressings for rapid wound closure. Films were evaluated for mechanical strength, swelling index, water vapor transmission rate (WVTR), film solubility, and in-vitro drug release studies. SEM revealed uniform and smooth surfaces of blank (PG9) and Cur-loaded composite films (PGC4). PGC4 exhibited excellent mechanical strength (tensile strength (TS) and Young's modulus (YM) were 32.83 and 0.55 MPa, respectively), swelling ability (600-800% at pH 5.4, 7.4, and 9), WVTR (2003 ± 26), and film solubility (27.06 ± 2.0). Sustained release (81%) of the encapsulated payload was also observed for 72 h. The antioxidant activity determined by DPPH free radical scavenging showed that the PGC4 possessed strong % inhibition. The PGC4 formulation displayed higher antibacterial potential against S. aureus (14.55 mm zone of inhibition) and E. coli (13.00 mm zone of inhibition) compared to blank and positive control by the agar well diffusion method. An in-vivo wound healing study was carried out on rats using a full-thickness excisional wound model. Wounds treated with PGC4 showed very rapid healing about 93% in just 10 days post wounding as compared to 82.75% by Cur cream and 80.90% by PG9. Furthermore, histopathological studies showed ordered collagen deposition and angiogenesis along with fibroblast formation. PGC4 also exerted a strong anti-inflammatory effect by downregulating the expression of pro-inflammatory cytokines (TNF-α and IL-6 were lowered by 76% and 68% as compared to the untreated group, respectively). Therefore, Cur-loaded composite films can be an ideal delivery system for effective wound healing.

Tannic acid-crosslinked O-carboxymethyl chitosan hydrogels for enhanced antibacterial activity and rapid hemostasis

Bacterial infection and massive blood loss are major challenges for global public health. Herein, a series of tannic acid encapsulated O-carboxymethyl chitosan (CMC) based hydrogels were prepared using a facile approach for both hemorrhage control and effective anti-bacterium. The results indicated that the tannic acid-cosslinked CMC hydrogels had excellent mechanical property, swelling ability as well as great cytocompatibility. Comparably, with increasing tannic acid loading, the bleeding control and antibacterial performance against both E. coli and S. aureus were improved simultaneously, especially for the 5% tannic acid-cosslinked CMC hydrogel. Moreover, the prepared CMC hydrogel loading with tannic acid could induce hemocytes and platelets aggregation, promote the blood clotting and achieve bleeding control in vivo due to the interconnected fibrous web structure and the chemical activation (the phenol group of tannic acid). Thus, the resultant CMC hydrogel enabled the maintenance of high bioavailability of tannic acid and synchronization with the interconnected fibrous structure of CMC hydrogels, which was expected to be a promising candidate for robust and safe hemostatic dressings.

Fabrication and Characterization of Electrospun Poly(Caprolactone)/Tannic Acid Scaffold as an Antibacterial Wound Dressing

Antibacterial wound dressings are promising materials to treat infected skin wounds, which greatly affect the wound-healing process. In this study, tannic acid (TA), a natural antibacterial agent, was successfully loaded by electrospinning into poly(caprolactone) (PCL) fibers in a high concentration. It is suggested that the addition of TA was beneficial for producing uniform and continuous PCL nanofibers. Hydrogen bonds existed between the PCL and TA molecules based on the analysis of FTIR spectra and DSC results. The interactions and continuous network improved the mechanical properties of the scaffolds. Meanwhile, increasing the amount of TA also enhanced the hydrophilicity and water absorption capacity of the scaffold, both of which are beneficial for accelerating wound healing. Moreover, a burst release of the TA in the initial stage and a controlled, steady release behavior over time contributed to the highly antibacterial properties of the PCL/TA scaffolds. The fabrication of the composite scaffold supplies a facile, efficient, and controllable approach to address the issue of antibacterial treatment in wound dressing.

Garden cress gum and maltodextrin as microencapsulation coats for entrapment of garden cress phenolic-rich extract: improved thermal stability, storage stability, antioxidant and antibacterial activities

The obtained garden cress 6-day sprouts phenolic-rich extract (GCSP) contained efficient health-promoting antioxidant-phenolic compounds. To improve the stability, bioavailability, and functional properties of these valuable phenolic compounds, GCSP was encapsulated by freeze-drying technique using different ratios of garden cress gum (GG) and maltodextrin (M) in the absence and presence of sonication (S). The prepared S/GG-microcapsule retained the highest phenolic content (95%), antioxidant activity (141.6%), and encapsulation efficiency (98.2%). It displayed the highest bio-accessibility of GCSP-phenolic compounds in simulated intestine fluid (87%) and demonstrated the greatest storage-stability at 40 °C for 60 days. S/GG-microcapsule possessed better physical properties including moisture, solubility, swelling, and morphological structures using SEM. The main spectral features, crosslinking, and improved thermal stability were demonstrated for S/GG-microcapsule using FTIR and thermogravimetric analyses. S/GG-microcapsule demonstrated much greater antibacterial activity than GCSP against pathogenic bacteria. S/GG-microcapsule can be added to different food products to improve their antioxidant and antibacterial properties.

Fabrication of chitosan-gelatin films incorporated with thymol-loaded alginate microparticles for controlled drug delivery, antibacterial activity and wound healing: In-vitro and in-vivo studies

Previously, studies have demonstrated the unique characteristics of chitosan-gelatin films as wound dressings applications. However, their application has been limited due to their inadequacy of antimicrobial and anti-inflammatory characteristics. To improve the intended multifunctional characteristics of chitosan-gelatin film, in this study, we designed a novel composite film with the capability of controlled and prolonged release of thymol as a natural antioxidant and antimicrobial drug. Here, thymol-loaded ALG MPs (Thymol-ALG MPs) were prepared by electrospraying method and incorporated into the chitosan-gelatin film. The composite wound dressings of Thymol-ALG MPs incorporated in chitosan-gelatin film (CS-GEL/Thymol-ALG MPs) were characterized by in vitro and in vivo evaluations. The Thymol-ALG MPs demonstrated spherical and uniform morphology, with high encapsulation efficiency (88.9 ± 1.1 %). The CS-GEL/Thymol-ALG MPs exhibited high antibacterial activity against both Gram-positive and Gram-negative bacteria and no cytotoxicity for the L929 fibroblast cells. The release trend of thymol from CS-GEL/Thymol-ALG MPs and Thymol-ALG MPs followed a pseudo-Fickian diffusion mechanism. This wound dressing effectively accelerates the wound healing process at rats' full-thickness skin excisions. Also, the histological analysis demonstrated that the CS-GEL/Thymol-ALG MPs could significantly enhance epithelialization, collagen deposition, and induce skin regeneration. The present antibacterial composite film has promising characteristics for wound dressings applications.

Designing Deferoxamine-Loaded Flaxseed Gum and Carrageenan-Based Controlled Release Biocomposite Hydrogel Films for Wound Healing

In this study, biocomposite hydrogel films made from flaxseed gum (FSG)/kappa carrageenan (CGN) were fabricated, using potassium chloride as a crosslinker and glycerol as a plasticizer. The composite films were loaded with deferoxamine (DFX), an iron chelator that promotes neovascularization and angiogenesis for the healing of wounds. The properties of the biocomposite hydrogel films, including swelling, solubility, water vapor transmission rate, tensile strength, elongation at break, and Young’s modulus studies, were tested. The films were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). In addition, drug release studies in PBS at pH 7.2 were investigated. In vivo analysis was performed by assessing the wound contraction in a full-thickness excisional wound rat model. Hematoxylin & eosin (H & E) and Masson’s trichome staining were performed to evaluate the effect of the films on wound healing progress. The visual and micro-morphological analysis revealed the homogenous structure of the films; however, the elongation at break property decreased within the crosslinked film but increased for the drug-loaded film. The FTIR analysis confirmed the crosslinking due to potassium chloride. A superior resistance towards thermal degradation was confirmed by TGA for the crosslinked and drug-loaded films. Drug release from the optimum film was sustained for up to 24 h. In vivo testing demonstrated 100% wound contraction for the drug-loaded film group compared to 72% for the pure drug solution group. In light of the obtained results, the higher potential of the optimized biocomposite hydrogel film for wound healing applications was corroborated.

Bio-Nanocomposite Based on Edible Gelatin Film as Active Packaging from Clarias gariepinus Fish Skin with the Addition of Cellulose Nanocrystalline and Nanopropolis

This study develops bio-nano composite gelatin-based edible film (NEF) by combining nanogelatin, cellulose nanocrystal (CNC), and nanopropolis (NP) fillers to improve the resulting film characteristics. The NEF was characterized in terms of thickness, swelling, pH, water content, solubility, vapor and oxygen permeability, mechanical properties, heat resistance, morphology, transparency, and color. The results showed that the thickness and swelling increased significantly, whilst the pH did not significantly differ in each treatment. The water content and the water solubility also showed no significant changes with loadings of both fillers. At the same time, vapor and oxygen permeability decreased with addition of the fillers but were not significantly affected by the loading amounts. The heat resistance properties increased with the filler addition. Tensile strength and Young’s modulus increased for the films loaded with >3% CNC. The elongation at break showed a significant difference together with transparency and color change. The greater the CNC concentration and NP loading were, the darker the resulting transparency and the color of the NEF. Overall results show a considerable improvement in the properties of the resulting NEFs with the incorporation of CNC and NP fillers.

Silver loaded biodegradable carboxymethyl chitin films with long-lasting antibacterial activity for infected wound healing

Bacteria-related infections are one of the main causes of human skin infections, which are associated with the delay of wound healing and secondary complications. In this work, a series of novel biodegradable films based on thermosensitive carboxymethyl chitin were prepared without using any crosslinkers. All the carboxymethyl chitin films had good flexibility, high transparency, and appropriate water absorption capacity, and could provide a moist environment for wound healing. The silver ions (Ag⁺) were incorporated on the LTCF-5 film, which had the best mechanical strength (56.39 MPa in the dry state and 0.66 MPa in the wet state) among the carboxymethyl chitin films and was higher than those of the reported biodegradable dressings and commercially available dressings. Compared with the commercial hydrofiber dressing with silver (AQUACEL®), the composite film could provide slow and sustained release of Ag⁺ with good strength and biodegradability, and displayed excellent long-lasting antibacterial activity in vitro against both S. aureus and E. coli without obvious cytotoxicity, which still possessed good antibacterial activity with almost 100% bacteriostatic rates after soaking in phosphate buffered saline for 7 days. More importantly, the Ag⁺ loaded carboxymethyl chitin film could promote infected cutaneous wound healing in a S. aureus infected full-thickness cutaneous defect in vivo model because of its long-lasting antibacterial activity, good biocompatibility, exudate absorption and ability to maintain a moist environment. Thus Ag⁺ loaded carboxymethyl chitin films are excellent candidates for infected wound healing.

Chitosan-Gelatin Films Cross-Linked with Dialdehyde Cellulose Nanocrystals as Potential Materials for Wound Dressings

In this study, thin chitosan-gelatin biofilms cross-linked with dialdehyde cellulose nanocrystals for dressing materials were received. Two types of dialdehyde cellulose nanocrystals from fiber (DNCL) and microcrystalline cellulose (DAMC) were obtained by periodate oxidation. An ATR-FTIR analysis confirmed the selective oxidation of cellulose nanocrystals with the creation of a carbonyl group at 1724 cm-1. A higher degree of cross-linking was obtained in chitosan-gelatin biofilms with DNCL than with DAMC. An increasing amount of added cross-linkers resulted in a decrease in the apparent density value. The chitosan-gelatin biofilms cross-linked with DNCL exhibited a higher value of roughness parameters and antioxidant activity compared with materials cross-linked with DAMC. The cross-linking process improved the oxygen permeability and anti-inflammatory properties of both measurement series. Two samples cross-linked with DNCL achieved an ideal water vapor transition rate for wound dressings, CS-Gel with 10% and 15% addition of DNCL-8.60 and 9.60 mg/cm2/h, respectively. The swelling ability and interaction with human serum albumin (HSA) were improved for biofilms cross-linked with DAMC and DNCL. Significantly, the films cross-linked with DAMC were characterized by lower toxicity. These results confirmed that chitosan-gelatin biofilms cross-linked with DNCL and DAMC had improved properties for possible use in wound dressings.

Injectable and Self-Healing Hydrogel Based on Chitosan-Tannic Acid and Oxidized Hyaluronic Acid for Wound Healing

Self-healing performance plays an important role in the in situ microinvasive injection of hydrogels, which can reduce sudden drug release and prolong the service life of hydrogels. In this paper, a multifunctional injectable and self-healing hydrogel for wound healing was developed. Chitosan (CS) was modified with TA to achieve potential adhesion, anti-inflammatory properties, and slower degradation rate. The hydrogel was formed by Schiff base reaction based on amino groups in CS and aldehyde groups in oxidized hyaluronic acid (OHA). The gel formation process was quick and convenient in mild conditions without extra initiators. Due to the dynamically reversible covalent bonds, the hydrogel could self-heal within 2 min after injection. It also had good biocompatibility and hemostatic performance. With the addition of TA, the hydrogel acquired anti-inflammatory properties and promoted cell growth, effectively accelerating the wound-healing process in vivo. The CS-TA/OHA hydrogel is expected to be used for skin repair.

Preparation and Characterization of High Mechanical Strength Chitosan/Oxidized Tannic Acid Composite Film with Schiff Base and Hydrogen Bond Crosslinking

Chitosan-based composite films with good biodegradability, biocompatibility, and sustainability are extensively employed in the field of food packaging. In this study, novel chitosan/tannic acid (CTA) and chitosan/oxidized tannic acid (COTA) composite films with excellent mechanical and antibacterial properties were prepared using a tape casting method. The results showed that, when 20% tannic acid (TA) was added, the tensile strength of the CTA composite film was 80.7 MPa, which was 89.4% higher than that of the pure chitosan (CS) film. TA was oxidized to oxidized tannic acid (OTA) with laccase, and the phenolic hydroxyl groups were oxidized to an o-quinone structure. With the addition of OTA, a Schiff base reaction between the OTA and CS occurred, and a dual network structure consisting of a chemical bond and hydrogen bond was constructed, which further improved the mechanical properties. The tensile strength of 3% COTA composite film was increased by 97.2% compared to that of pure CS film. Furthermore, these CTA films with significant antibacterial effects against Escherichia coli (E. coli) are likely to find uses in food packaging applications.