Effect of plasticizer and antimicrobial agents on functional properties of bionanocomposite films based on corn starch-chitosan for food packaging applications

Antimicrobial starch-based cryogels and hydrogels for dual-active food packaging applications

The present study reports on the valorisation of starch waste biomass to produce dual-active cryogels and hydrogels able to adsorb water and deliver antimicrobial substances for fresh food packaging applications. Starch hydrogels were prepared by oxidation with sodium metaperiodate in water and mild conditions, while cryogels were obtained by freeze-drying process. To explore the role of starch composition on the final properties of materials, two starches differing in amylose/amylopectin ratio, were evaluated. The prepared materials were microstructurally and morphologically characterized by FTIR and NMR spectroscopy (1D, 2D, and DOSY experiments), and SEM microscopy. To provide the materials with active properties, they were loaded with antimicrobial molecules by absorption, or by crosslinking via Schiff-base reaction. All materials demonstrated high water absorption capacity and ability to deliver volatile molecules, including diacetyl and complex mixtures like mint essential oil. The release profiles of the adsorbed molecules were determined through quantitative NMR spectroscopy over time. The antibacterial activity was successfully demonstrated against Gram-positive bacterial strains for unloaded cryogels and hydrogels, and after loading with diacetyl and essential oil. The developed materials can be regarded as part of active pads for food packaging applications capable to control moisture inside the package and inhibit microbial contamination.

Starch-chitosan-Taro mucilage nanocomposite active food packaging film doped with zinc oxide nanoparticles - Fabrication, mechanical properties, anti-bacterial activity and eco toxicity assessment

In this research, a novel active food packaging material was developed by blending starch, chitosan, and plant-based mucilage with zinc oxide nanoparticles. The polymeric nanocomposite film, created by incorporating zinc oxide nanoparticles into the mixture using a straightforward approach, was analyzed for its structural and functional attributes using FTIR, XRD, SEM, and TGA/DSC. These analyses revealed a robust interaction between the polymers' functional groups and the nanoparticles, forming a stable film. The film's mechanical properties, including tensile strength and Young's modulus, were high. It also showed reduced wettability and water solubility, enhancing water resistance. The biodegradability rate was 100 %. Antibacterial tests against Bacillus sp. and Pseudomonas sp. showed significant inhibition zones of 26 mm and 30 mm, respectively, demonstrating strong antibacterial effectiveness. The film's non-target toxicity was assessed through phytotoxicity experiments on Vigna angularis and soil nutrient evaluations, with no negative impact on plant growth or soil health observed. These results indicate that this nanocomposite is a safe, biocompatible option for food packaging.

Value addition of mango kernel for development and characterization of starch with starch nanoparticles for packaging applications

The present research was conducted to explore the potential of mango kernel starch from the Chaunsa variety to develop starch and starch nanoparticles (SNPs) based films. The investigation included starch isolation from mango kernel followed by the preparation of SNPs by acid hydrolysis and a thorough examination of various physicochemical properties for film formation. The properties of SNPs were found to be distinctly different from those of native starch. SNPs exhibited an aggregated form with an irregular surface, whereas native starch had an oval and elongated shape with a smooth surface. X-ray diffraction (XRD) analysis confirmed that the starch type in SNPs was of the A-type. Additionally, the pasting properties of SNPs were minimal due to the acid hydrolysis process. SNP-based composite film was developed with (5 %) SNP concentration added. This successful incorporation of SNPs enhanced biodegradability, with complete degradation occurring within three weeks. Moreover, the composite films displayed increased burst strength, measuring 1303.51 ± 73.7 g, and lower water vapor transmission rates (WVTR) at (7.40 ± 0.50) × 10-3 g per square meter per second and reduced water solubility at 35.32 ± 3.0 %. This development represents a significant advancement in the field of eco-friendly packaging materials.

Advances in sustainable food packaging applications of chitosan/polyvinyl alcohol blend films

Researchers are addressing environmental concerns related to petroleum-based plastic packaging by exploring biopolymers from natural sources, chemical synthesis, and microbial fermentation. Despite the potential of individual biopolymers, they often exhibit limitations like low water resistance and poor mechanical properties. Blending polymers emerges as a promising strategy to overcome these challenges, creating films with enhanced performance. This review focuses on recent advancements in chitosan/polyvinyl alcohol (PVA) blend food packaging films. It covers molecular structure, properties, strategies for performance improvement, and applications in food preservation. The blend's excellent compatibility and intermolecular interactions make it a promising candidate for biodegradable films. Future research should explore large-scale thermoplastic technologies and investigate the incorporation of additives like natural extracts and nanoparticles to enhance film properties. Chitosan/PVA blend films offer a sustainable alternative to petroleum-based plastic packaging, with potential applications in practical food preservation.

Unveiling the Future of Meat Packaging: Functional Biodegradable Packaging Preserving Meat Quality and Safety

Meat quality and shelf life are important parameters affecting consumer perception and safety. Several factors contribute to the deterioration and spoilage of meat products, including microbial growth, chemical reactions in the food's constituents, protein denaturation, lipid oxidation, and discoloration. This study reviewed the development of functional packaging biomaterials that interact with food and the environment to improve food's sensory properties and consumer safety. Bioactive packaging incorporates additive compounds such as essential oils, natural extracts, and chemical substances to produce composite polymers and polymer blends. The findings showed that the incorporation of additive compounds enhanced the packaging's functionality and improved the compatibility of the polymer-polymer matrices and that between the polymers and active compounds. Food preservatives are alternative substances for food packaging that prevent food spoilage and preserve quality. The safety of food contact materials, especially the flavor/odor contamination from the packaging to the food and the mass transfer from the food to the packaging, was also assessed. Flavor is a key factor in consumer purchasing decisions and also determines the quality and safety of meat products. Novel functional packaging can be used to preserve the quality and safety of packaged meat products.

Recent advances in biomacromolecule-based nanocomposite films for intelligent food packaging- A review

In food packaging, biopolymer films are biodegradable films made from biomacromolecule-based natural materials, while biocomposite films are hybrids of two or more materials, with at least one being biodegradable. Bionanocomposites are different than the earlier ones, as they consist of various nanofillers (both natural and inorganic) in combination with biomacromolecule-based biodegradable materials to make good compostable bionanocomposites. In this regard, a new type of material known as bionanocomposite has been recently introduced to improve the properties and performance of biocomposite films. Bionanocomposites are primarily developed for active packaging, but their use in intelligent packaging is also noteworthy. For example, bionanocomposites developed using a hybrid of anthocyanin and carbon dots as intelligent materials have shown their high pH-sensing properties. The natural nanofillers (like nanocellulose, nanochitosan, nanoliposome, cellulose nanocrystals, cellulose nanofibers, etc.) are being employed to promote the sustainability, degradability and safety of bionanocomposites. Overall, this article comprehensively reviews the latest innovations in bionanocomposite films for intelligent food packaging over the past five years. In addition to packaging aspects, the role of nanofillers, the importance of life cycle assessment (LCA) and risk assessment, associated challenges, and future perspectives of bionanocomposite intelligent films are also discussed.

Polysaccharides and proteins based bionanocomposites as smart packaging materials: From fabrication to food packaging applications a review

Food industry is the biggest and rapidly growing industries all over the world. This sector consumes around 40 % of the total plastic produced worldwide as packaging material. The conventional packaging material is mainly petrochemical based. However, these petrochemical based materials impose serious concerns towards environment after its disposal as they are nondegradable. Thus, in search of an appropriate replacement for conventional plastics, biopolymers such as polysaccharides (starch, cellulose, chitosan, natural gums, etc.), proteins (gelatin, collagen, soy protein, etc.), and fatty acids find as an option but again limited by its inherent properties. Attention on the initiatives towards the development of more sustainable, useful, and biodegradable packaging materials, leading the way towards a new and revolutionary green era in the food sector. Eco-friendly packaging materials are now growing dramatically, at a pace of about 10-20 % annually. The recombination of biopolymers and nanomaterials through intercalation composite technology at the nanoscale demonstrated some mesmerizing characteristics pertaining to both biopolymer and nanomaterials such as rigidity, thermal stability, sensing and bioactive property inherent to nanomaterials as well as biopolymers properties such as flexibility, processability and biodegradability. The dramatic increase of scientific research in the last one decade in the area of bionanocomposites in food packaging had reflected its potential as a much-required and important alternative to conventional petroleum-based material. This review presents a comprehensive overview on the importance and recent advances in the field of bionanocomposite and its application in food packaging. Different methods for the fabrication of bionanocomposite are also discussed briefly. Finally, a clear perspective and future prospects of bionanocomposites in food packaging were presented.

Recent Advances in Functional Cellulose-based Films with Antimicrobial and Antioxidant Properties for Food Packaging

The packaging of food plays a crucial role in food preservation worldwide. However, traditional packaging systems are passive layers with weak efficiency in protecting the food quality. Therefore, packaged foods are gradually spoiled due to the oxidation and growth of microorganisms. Additionally, most of the commercial packaging films are made of petroleum-based materials which raise environmental concerns. Accordingly, the development of eco-friendly natural-derived active packaging systems has increased the attention of scientists. Cellulose as the most abundant polysaccharide on earth with high biocompatibility, no toxicity, and high biodegradability has extensively been applied for the fabrication of packaging films. However, neat cellulose-based films lack antioxidant and antimicrobial activities. Therefore, neat cellulose-based films are passive films with weak food preservation performance. Active films have been developed by incorporating antioxidants and antimicrobial agents into the films. In this review, we have explored the latest research on the fabrication of antimicrobial/antioxidant cellulose-based active packaging films by incorporating natural extracts, natural polyphenols, nanoparticles, and microparticles into the cellulose-based film formulations. We categorized these types of packaging films into two main groups: (i) blend films which are obtained by mixing solutions of cellulose with other soluble antimicrobial/antioxidant agents such as natural extracts and polyphenols; and (ii) composite films which are fabricated by dispersing antimicrobial/antioxidant nano- or microfillers into the cellulose solution. The effect of these additives on the antioxidant and antimicrobial properties of the films has been explained. Additionally, the changes in the other properties of the films such as hydrophilicity, water evaporation rate, and mechanical properties have also been briefly addressed.

Effect of the Addition of Fique Bagasse Cellulose Nanoparticles on the Mechanical and Structural Properties of Plastic Flexible Films from Cassava Starch

One of the activities most representative of the agricultural sector in Colombia is the production of biodegradable fique fiber. The efficiency of the defiberization process of the fique leaves is very low since a mere 4% of the total weight of the leaf (cabuya) is used and marketed. The remaining 96%, composed of fique juice and bagasse, is considered to be waste and discarded, impacting the environment. The aim of this work was to study fique bagasse as a source of cellulose nanoparticles (CNCs). CNCs were obtained by acid hydrolysis and added at 10% to films made from cassava thermoplastic starch (TPS) by the casting method. Structural changes in the CNCs, TPS, and their mixtures were characterized by FTIR-ATR and their morphology and particle size by SEM and TEM microscopy, respectively. Thermal properties were analyzed using DSC and TGA, along with their effect on mechanical properties. Changes in the FTIR spectra indicated that the chemical method adequately removed hemicellulose and lignin from the fiber surface of fique bagasse. The CNCs showed a diameter and length of 7.5 ± 3.9 and 52.7 ± 18.1 nm, respectively, and TPS 10% CNC obtained an increase in mechanical strength of 116%. The obtainment of CNCs from lignocellulosic materials can thus be viewed as a favorable option for the subsequent reinforcement of a polymeric matrix.

Recent preparation, modification and application progress of starch nanocrystals: A review

Due to the advantages of wide sources, high biocompatibility and favorable biodegradability, starch nanocrystals (SNCs) have gradually attracted attention and have bright development prospects in food, agriculture, materials, medicine and other fields. However, the traditional preparation method of SNCs is time-consuming and inefficient, and the physicochemical properties cannot fully meet the needs of multiple applications. Fortunately, the unique onion-like structure of starch granules and the large number of hydroxyl groups present on the surface entitle SNCs to efficient preparation and modification. This paper comprehensively reviewed the improvement methods of SNCs preparation process in recent years, and the advantages and disadvantages of the two improvement strategies were compared. Besides, the importance of introducing different pretreatment methods into the SNCs preparation process was emphasized. It also focused on the different modification treatment and application progress of SNCs, especially in the starch-based surface coating of fruits and vegetables. The information will contribute to further improve the preparation efficiency and physicochemical properties of SNCs, and ultimately expand the application field.

Sustainable polylactide materials with the function of blocking a specific wavelength of light based on aloe-emodin

Polylactide, a biodegradable polymer, can alleviate white pollution, but the use of polylactide in food packaging is limited by high transmittance to light with a specific wavelength, UV (185-400 nm) and short-wavelength visible (400-500 nm) light. Herein, the polylactide end-capped with renewable light absorber aloe-emodin (PLA-En), is blended with commercial polylactide (PLA) to fabricate the polylactide film with the function of blocking light with a specific wavelength, PLA/PLA-En film. Only 40 % of light around 287 and 430 nm transmits through PLA/PLA-En film incorporating 3 mass% of PLA-En, while the film still maintains good mechanical properties and high transparency more than 90 % at 660 nm because of the good compatibility with PLA. The PLA/PLA-En film exhibits stable light-blocking properties under light irradiation and anti-solvent migration under the immersion of fat simulant. Almost no PLA-En migrated out of the film with the molecular weight of PLA-En only 2.89 × 104 g/mol. Compared with PLA film and commercial PE plastic wrap, the designed PLA/PLA-En film exhibits a better preservative effect on riboflavin and milk for inhibiting the production of 1O2. This study offers a green strategy for developing UV and short-wavelength light protective food package film based on renewable resource.

An insight on sources and biodegradation of bioplastics: a review

Durability and affordability are two main reasons for the widespread consumption of plastic in the world. However, the inability of these materials to undergo degradation has become a significant threat to the environment and human health To address this issue, bioplastics have emerged as a promising alternative. Bioplastics are obtained from renewable and sustainable biomass and have a lower carbon footprint and emit fewer greenhouse gases than petroleum-based plastics. The use of these bioplastics sourced from renewable biomass can also reduce the dependency on fossil fuels, which are limited in availability. This review provides an elaborate comparison of biodegradation rates of potential bioplastics in soil from various sources such as biomass, microorganisms, and monomers. These bioplastics show great potential as a replacement for conventional plastics due to their biodegradable and diverse properties.

Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, and Applications

Biopolymer-based packaging materials have become of greater interest to the world due to their biodegradability, renewability, and biocompatibility. In recent years, numerous biopolymers-such as starch, chitosan, carrageenan, polylactic acid, etc.-have been investigated for their potential application in food packaging. Reinforcement agents such as nanofillers and active agents improve the properties of the biopolymers, making them suitable for active and intelligent packaging. Some of the packaging materials, e.g., cellulose, starch, polylactic acid, and polybutylene adipate terephthalate, are currently used in the packaging industry. The trend of using biopolymers in the packaging industry has increased immensely; therefore, many legislations have been approved by various organizations. This review article describes various challenges and possible solutions associated with food packaging materials. It covers a wide range of biopolymers used in food packaging and the limitations of using them in their pure form. Finally, a SWOT analysis is presented for biopolymers, and the future trends are discussed. Biopolymers are eco-friendly, biodegradable, nontoxic, renewable, and biocompatible alternatives to synthetic packaging materials. Research shows that biopolymer-based packaging materials are of great essence in combined form, and further studies are needed for them to be used as an alternative packaging material.

Gelatin/poly(vinyl alcohol)-based functional films integrated with spent coffee ground-derived carbon dots and grapefruit seed extract for active packaging application

Nanoparticles are attractive, functional additives with great potential to be applied in biomaterial and food packaging. However, these particles are not soluble in water, thus limiting their widespread application. Here, we report a facile fabrication of carbon dots (CDs) using the spent coffee ground as the carbon source through a hydrothermal method. The CD was added to the gelatin/poly(vinyl alcohol) (Gel/PVA) film and grapefruit seed extract (GSE) to prepare multifunctional packaging films. The functional films' physiochemical and functional properties and packaging application were investigated. The composite film showed good UV protection properties with a slight decrease in transparency. The composite film containing CD/GSE showed strong antioxidant activity, scavenging >38 % DPPH and 100 % ABTS radicals. The film also exhibited significant antibacterial activity against the foodborne pathogens Listeria monocytogenes and Escherichia coli, completely eradicating the growth of these bacteria within 9 h of exposure. The CD/GSE-incorporated Gel/PVA films were used for pork packaging. The films were able to enhance the pork shelf life by reducing the L. monocytogenes bacterial growth in meat by 2 Log CFU/mL lower than the control wrapping film. The multifunctional Gel/PVA films are expected to be used for the active packaging of meat products.

Fabrication of starch-based packaging materials

This chapter aims to provide the reader with some information about the possibility of starch as a suitable substitute for synthetic polymers in biodegradable food packaging. This is due to the starch has good characteristics which are great biodegradability, low cost and also easy to gain from natural resources. However, some of technical challenges are also introduced before starch-based polymers can be used in more applications. These technical challenges involved preparation methods and incorporation of additives and these are being summarized in this topic. Hence, the enhancement of starch can be done in order to prepare innovative starch-based biodegradable materials.

Turmeric carbon quantum dots enhanced chitosan nanocomposite films based on photodynamic inactivation technology for antibacterial food packaging

The increased demand for food quality and safety has led the food industry to pay urgent attention to new packaging materials with antimicrobial activity. In this study, we combined photodynamic inactivation of bactericidal technology in food packaging materials by incorporating fluorescent carbon quantum dots (CDs) prepared from the natural plant turmeric into a chitosan matrix to prepare a series of active composite food packaging films (CDs-CS). The chitosan film containing CDs had better mechanical properties, UV protection and hydrophobicity. Under irradiation with a 405 nm light source, the composite film was able to produce abundant reactive oxygen species, and the CDs-CS₂ film exhibited reductions of approximately 3.19 and 2.05 Log₁₀ CFU/mL for Staphylococcus aureus and Escherichia coli respectively within 40 min. In cold pork storage applications, CDs-CS₂ films showed inhibition of the growth of colonization in pork and retarded the spoilage of pork within 10 days. This work will provide new insights to explore safe and efficient antimicrobial food packaging.

Beyond brewing: β-acid rich hop extract in the development of a multifunctional polylactic acid-based food packaging

Hops' (Humulus lupulus L.) phytochemicals are well known for their bioactivity. In the present study, the functional properties of hop extract rich in β-acids, as potassium-salts structures (KBA), were investigated to develop a sustainable active food packaging. Polylactic acid (PLA)-based sheets were incorporated with increasing concentrations of hop extract (0.1-5 % w/w in terms of KBA) and characterized through performance and bioactive properties. KBA-added sheets presented decreased crystallinity and affected mechanical and thermal properties, especially with higher KBA amounts. The sheets' surface hydrophobicity gradually decreased by KBA-extract addition, while the water vapor permeability was not affected. A Fickian diffuse behavior and a better fit to application in fatty foods were observed during release tests. UV-blocking and antioxidant properties were improved by KBA incorporation. Furthermore, results from antibacterial assays revealed great susceptibility of Staphylococcus aureus and Listeria monocytogenes towards sheets added with 5 % of KBA. Moreover, the atomic force microscopy (AFM) observations revealed that KBA led to strong effects on the cell membranes of both bacteria, including disruption of membrane integrity and cell death. Therefore, this study is a sign of great prospects of hop β-acids use, as KBA compound, in the production of sustainable active packaging for safe food shelf-life extension.

Recent advances of antibacterial starch-based materials

Starch has attracted a lot of attention because it is biodegradable, renewable, nontoxic and low cost. By adding antibacterial substances to starch, starch-based materials have antibacterial properties. The composite with other materials can improve the comprehensive performance of starch-based materials, thus broadening the application field of the material. In this paper, we focus on antibacterial starch-based materials and review their preparation and applications. It was found that antibacterial starch-based materials were most widely used in packaging, followed by medicine, and the research on smart starch-based materials was relatively less. This review may provide some reference value for subsequent studies of starch-based materials.

A Review on Antimicrobial Packaging for Extending the Shelf Life of Food

Food packaging systems are continually impacted by the growing demand for minimally processed foods, changing eating habits, and food safety risks. Minimally processed foods are prone to the growth of harmful microbes, compromising quality and safety. As a result, the need for improved food shelf life and protection against foodborne diseases alongside consumer preference for minimally processed foods with no or lesser synthetic additives foster the development of innovative technologies such as antimicrobial packaging. It is a form of active packaging that can release antimicrobial substances to suppress the activities of specific microorganisms, thereby improving food quality and safety during long-term storage. However, antimicrobial packaging continues to be a very challenging technology. This study highlights antimicrobial packaging concepts, providing different antimicrobial substances used in food packaging. We review various types of antimicrobial systems. Emphasis is given to the effectiveness of antimicrobial packaging in various food applications, including fresh and minimally processed fruit and vegetables and meat and dairy products. For the development of antimicrobial packaging, several approaches have been used, including the use of antimicrobial sachets inside packaging, packaging films, and coatings incorporating active antimicrobial agents. Due to their antimicrobial activity and capacity to extend food shelf life, regulate or inhibit the growth of microorganisms and ultimately reduce the potential risk of health hazards, natural antimicrobial agents are gaining significant importance and attention in developing antimicrobial packaging systems. Selecting the best antimicrobial packaging system for a particular product depends on its nature, desired shelf life, storage requirements, and legal considerations. The current review is expected to contribute to research on the potential of antimicrobial packaging to extend the shelf life of food and also serves as a good reference for food innovation information.

The physiochemical and photodynamic inactivation properties of corn starch/erythrosine B composite film and its application on pork preservation

This study explored the effect of erythrosine B (EB) as a photosensitizer in corn starch (CS) film and its physicochemical properties and photodynamic bacteriostatic ability against Staphylococcus aureus, Escherichia coli, and Salmonella both in vitro and inoculated on pork under the irradiation of D65 light-emitting diode (LED) (400-800 nm). The study revealed that the physiochemical properties of CS films: moisture content, water solubility, and water vapor transmission were improved with the addition of EB. In addition, the elasticity and the thermal stability of the film were enhanced. The results showed that the CS-EB films stimulated a maximum of 26.36 μg/mL hydrogen peroxide and 74.5 μg/g hydroxyl radical under irradiation. The CS composite films with a 5 % concentration of EB inhibited the bacterial growth by 4.7 Log CFU/mL in vitro after 30 min of illumination, and 2.4 Log CFU/mL on the pork samples under the same experimental condition. Moreover, the antibacterial ability was enhanced with the increase in EB concentration. Overall, the CS-EB composite films can inhibit the growth of bacteria through photodynamic inactivation and has the potential to become a new type of environmentally friendly packaging material.

Antibacterial, Antifungal and Antiviral Polymeric Food Packaging in Post-COVID-19 Era

Consumers are now more concerned about food safety and hygiene following the COVID-19 pandemic. Antimicrobial packaging has attracted increased interest by reducing contamination of food surfaces to deliver quality and safe food while maintaining shelf life. Active packaging materials to reduce contamination or inhibit viral activity in packaged foods and on packaging surfaces are mostly prepared using solvent casting, but very few materials demonstrate antiviral activity on foods of animal origin, which are important in the human diet. Incorporation of silver nanoparticles, essential oils and natural plant extracts as antimicrobial agents in/on polymeric matrices provides improved antifungal, antibacterial and antiviral properties. This paper reviews recent developments in antifungal, antibacterial and antiviral packaging incorporating natural or synthetic compounds using preparation methods including extrusion, solvent casting and surface modification treatment for surface coating and their applications in several foods (i.e., bakery products, fruits and vegetables, meat and meat products, fish and seafood and milk and dairy foods). Findings showed that antimicrobial material as films, coated films, coating and pouches exhibited efficient antimicrobial activity in vitro but lower activity in real food systems. Antimicrobial activity depends on (i) polar or non-polar food components, (ii) interactions between antimicrobial compounds and the polymer materials and (iii) interactions between environmental conditions and active films (i.e., relative humidity, oxygen and water vapor permeability and temperature) that impact the migration or diffusion of active compounds in foods. Knowledge gained from the plethora of existing studies on antimicrobial polymers can be effectively utilized to develop multifunctional antimicrobial materials that can protect food products and packaging surfaces from SARS-CoV-2 contamination.

A Green Film-Forming Investigation of the Edible Film Based on Funoran: Preparation, Characterization, and the Investigation of the Plasticizer Effects

In this study, an edible film based on funoran was developed. Moreover, the effects of plasticizers (glycerol, xylitol, and sorbitol) on the physicochemical properties of the funoran films were also investigated. The interactions between plasticizers and funoran molecules of the film-forming system were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The results showed that the addition of plasticizers altered and broke the initial complex entangled structures of funoran molecular chains. Funoran films containing plasticizers were compatible, homogeneous, and dense, exhibiting good thermal stability below 100 °C. With the addition of plasticizers, the elongation at break, oxygen permeability, light transmittance, and water vapor permeability increased, but the tensile strength decreased. It was found that a glycerol addition of 40% was most suitable for commercial applications. All the results revealed the excellent film-forming properties of funoran, indicating that the prepared funoran films have tremendous potential for packaging applications.

Functional Polymer and Packaging Technology for Bakery Products

Polymeric materials including plastic and paper are commonly used as packaging for bakery products. The incorporation of active substances produces functional polymers that can effectively retain the quality and safety of packaged products. Polymeric materials can be used to produce a variety of package forms such as film, tray, pouch, rigid container and multilayer film. This review summarizes recent findings and developments of functional polymeric packaging for bakery products. Functional polymerics are mainly produced by the incorporation of non-volatile and volatile active substances that effectively retain the quality of packaged bakery products. Antimicrobial agents (either synthetic or natural substances) have been intensively investigated, whereas advances in coating technology with functional materials either as edible coatings or non-edible coatings have also preserved the quality of packaged bakery products. Recent patents demonstrate novel structural packaging designs combined with active functions to extend the shelf life of bakery products. Other forms of active packaging technology for bakery products include oxygen absorbers and ethanol emitters. The latest research progress of functional polymeric packaging for bakery products, which provides important reference value for reducing the waste and improving the quality of packaged products, is demonstrated. Moreover, the review systematically analyzed the spoilage factors of baked products from physicochemical, chemical and microbiological perspectives. Functional packaging using polymeric materials can be used to preserve the quality of packaged bakery products.

Development of Eggshell-Based Orange Peel Activated Carbon Film for Synergetic Adsorption of Cadmium (II) Ion

Heavy metal contamination has spread around the world, particularly in emerging countries. This study aimed to assess the effectiveness of starch/eggshell/orange peel-activated carbon-based composite films in removing cadmium (II) ions from water samples. X-ray diffraction and scanning electron microscopy were used to characterize the composite films. The effect of Cd²⁺ was studied using a UV-Vis spectrophotometer and atomic absorption spectroscopy. The morphology of the composite film reveals a highly porous and rough surface with more open channels and a non-uniform honeycomb, indicating that the film has a high potential to adsorb Cd²⁺. The diffraction peaks for this film were found to be at 13.74°, 17.45°, 18.4°, and 23.6°, indicating a typical crystalline A-type packing arrangement within the starch granules. The results indicate that crystalline structure was unaffected by the addition of eggshell powder and orange peel-activated carbon. In 0.5 mg L^-1 and 1.0 mg L^-1 Cd²⁺ ions, the composite film removed 100% and 99.7% of the Cd²⁺, respectively, while the maximum removal efficiency for methylene blue was 93.75%. Thus, the current study shows that starch/eggshell/orange peel activated carbon film has a high potential for commercial activated carbon as a low-cost adsorbent.

Transparent, UV-blocking, and high barrier cellulose-based bioplastics with naringin as active food packaging materials

Free-standing, robust, and transparent bioplastics were obtained by blending cellulose and naringin at different proportions. Optical, thermal, mechanical, antioxidant, and antimicrobial properties were systematically investigated. In general, the incorporation of naringin produced important UV blocking and plasticizer effects and good antioxidant and antibacterial properties. Moreover, the barrier properties were characterized by determination of their water and oxygen transmission rates, finding that both parameters decreased by increasing the naringin content and reaching values similar to other petroleum-based plastics and cellulose derivatives used for food packaging applications. Finally, the biodegradability of these films was determined by measurement of the biological oxygen demand (BOD) in seawater, demonstrating an excellent decomposition in such conditions.

Antimicrobial Nanomaterials for Food Packaging

Food packaging plays a key role in offering safe and quality food products to consumers by providing protection and extending shelf life. Food packaging is a multifaceted field based on food science and engineering, microbiology, and chemistry, all of which have contributed significantly to maintaining physicochemical attributes such as color, flavor, moisture content, and texture of foods and their raw materials, in addition to ensuring freedom from oxidation and microbial deterioration. Antimicrobial food packaging systems, in addition to their function as conventional food packaging, are designed to arrest microbial growth on food surfaces, thereby enhancing food stability and quality. Nanomaterials with unique physiochemical and antibacterial properties are widely explored in food packaging as preservatives and antimicrobials, to extend the shelf life of packed food products. Various nanomaterials that are used in food packaging include nanocomposites composing nanoparticles such as silver, copper, gold, titanium dioxide, magnesium oxide, zinc oxide, mesoporous silica and graphene-based inorganic nanoparticles; gelatin; alginate; cellulose; chitosan-based polymeric nanoparticles; lipid nanoparticles; nanoemulsion; nanoliposomes; nanosponges; and nanofibers. Antimicrobial nanomaterial-based packaging systems are fabricated to exhibit greater efficiency against microbial contaminants. Recently, smart food packaging systems indicating the presence of spoilage and pathogenic microorganisms have been investigated by various research groups. The present review summarizes recent updates on various nanomaterials used in the field of food packaging technology, with potential applications as antimicrobial, antioxidant equipped with technology conferring smart functions and mechanisms in food packaging.

Effect on the Properties of Edible Starch-Based Films by the Incorporation of Additives: A Review

At present, people more actively pursuing biodegradable-based food packaging to lower the environmental problems of plastic-based packaging. Starch could become a promising alternative to plastic because of its properties (easily available, nontoxic, tasteless, biodegradable, ecofriendly, and edible). This review article is focused mainly on the impact of the properties of starch-based biodegradable films, such as their thickness, morphology, and optical, water-barrier, mechanical, oxygen-barrier, antioxidant, and antimicrobial properties, after the incorporation of additives, and how such films fulfill the demands of the manufacturing of biodegradable and edible food-based film with preferable performance. The incorporation of additives in starch-based films is largely explained by its functioning as a filler, as shown via a reduction in water and oxygen permeability, increased thickness, and better mechanical properties. Additives also showed antimicrobial and antioxidant properties in the films/coatings, which would positively impact the shelf life of coated or wrapped food material.

Application of innovative packaging technologies to manage fungi and mycotoxin contamination in agricultural products: Current status, challenges, and perspectives

The consumer demand for safe, "healthy," and premium foods, preferably with an extended shelf-life; demand for easy packaging; and choice for more sustainable food packaging have contributed to the development of novel packaging technologies. The application of adequate packaging materials has recently become a major post-harvest challenge concerning the control of fungi and mycotoxin. This review will describe the current antifungal packaging technology involved to prevent the contamination of fungi and mycotoxin, along with the characteristics and mechanism of action in food products. Antifungal packaging has incredible potential in the food packaging sector. The most suitable approach for the safe storage of agricultural produce for farmers is the hermetic packaging technology, which maintains quality while providing a good barrier against fungi and mycotoxin. Furthermore, active antifungal packaging is a viable method for incorporating antifungal agents against pathogenic fungi. Essential oils and organic acid have received more scientific attention due to their increased efficacy against mold growth. Polypeptides, chitosan, and natamycin incorporated in active packaging significantly reduced fungi. Even though nanotechnological advancements in antifungal packaging are promising, safety and regulation issues remain significant concerns.

Biodegradable gelatin-based films with nisin and EDTA that inhibit Escherichia coli

In this study, we developed gelatin-based films for active packaging with the ability to inhibit E. coli. We created these novel biodegradable gelatin-based films with a nisin-EDTA mix. FT-IR, TGA, and SEM analysis showed that nisin interacted with the gelatin by modifying its thermal stability and morphology. The use of nisin (2,500 IU/mL) with concentrations of Na-EDTA (1.052 M stock solution) distributed in the polymer matrix generated a significant decrease in the growth of E. coli when compared to the control. In freshly made films (t0), the growth of E. coli ATCC 25922 was reduced by approximately 3 logarithmic cycles. Two weeks after the films were made, a reduction in antimicrobial activity was observed in approximately 1, 1 and 3 logarithmic cycles of the films with 5%, 10% and 20% of the compound (nisin/Na-EDTA) distributed in the polymer matrix, respectively. This evidences an antimicrobial effect over time. Also, biodegradation tests showed that the films were completely degraded after 10 days. With all these results, an active and biodegradable packaging was successfully obtained to be potentially applied in perishable foods. These biodegradable, gelatin-based films are a versatile active packaging option. Further research on the barrier properties of these films is needed.

Physical, Mechanical, and Morphological Performances of Arrowroot (Maranta arundinacea) Fiber Reinforced Arrowroot Starch Biopolymer Composites

This research is driven by stringent environmental legislation requiring the consumption and use of environmentally friendly materials. In this context, this paper is concerned with the development and characterization of thermoplastic arrowroot starch (TPAS) based biocomposite films by incorporating arrowroot fiber (AF) (0–10%) into a glycerol plasticized matrix by using the solution casting method. Developed TPAS/AF composite films were investigated, such as physical, morphological (FESEM), tensile, and tear strength characteristics. The tensile and tear strengths of TPAS/AF composites were increased significantly from 4.77 to 15.22 MPa and 0.87 to 1.28 MPa, respectively, as compared to the control TPAS films, which were 2.42 MPa and 0.83 MPa, respectively, while elongation was significantly decreased from 25.57 to 6.21% compared to control TPAS film, which was 46.62%. The findings revealed that after the fiber was reinforced, the mechanical properties were enhanced, and the optimum filler content was 10%. Regardless of fiber loadings, the results of water absorption testing revealed that the composite films immersed in seawater and rainwater absorbed more water than distilled water. Overall, the results of this research focus on providing information on biopolymer composite film and revealing the great potential it has for the food packaging industry.

Influence of Ulluco Starch Concentration on the Physicochemical Properties of Starch-Chitosan Biocomposite Films

This work aimed to prepare ulluco starch (US)/chitosan (Ch) edible films and evaluate the effect of the concentration of US on their physicochemical properties. The use of edible films is a means of adding value to the ulluco crop and evaluating the viability of using new sources to produce packaging materials. Different samples were prepared at different US concentrations (2%, 3%, 4%, and 5% w/v) and a fixed chitosan concentration (1.5% w/v); then, samples were analyzed, considering their physical, mechanical, and thermal properties. The US/Ch edible films showed an increase in solubility from 17.5% to 21.7%, swelling power (SP) from 38.9% to 267%, tensile strength (TS) from 3.69 MPa to 10.7 MPa, Young modulus (YM) from 18.0 Pa to 652 Pa, and thermal stability as the US concentration increased. However, samples with low US concentrations showed higher elongation at break (EB) (36.6%) and better barrier properties (WVP) (5.61 × 10⁻¹¹ g/m s Pa). The films evaluated in this work presented good physical, mechanical, and barrier properties, revealing their potential as packaging material ensuring food security, and demonstrating the technological potential of US.

Preparation of chitosan-SiO2 nanoparticles by ultrasonic treatment and its effect on the properties of starch film

The ultrasonic treatment could decrease the particles size of chitosan-SiO₂ particles. The EDS of samples with ultrasonic treatment for 0 min and 10 min indicated that the SiO₂ was present in prepared chitosan-SiO₂ particles. When the ultrasonic time reached 10 min, the chitosan-SiO₂ nanoparticles formed and the mean size was 506.7 ± 3.42 nm and the Zeta potential of the chitosan-SiO₂ nanoparticles was greater than 30 mV, showing the suspension was a stable dispersed liquid. The chitosan-SiO₂ nanoparticles were used as reinforcement in thermoplastic starch films to further verify their performance in enhanced films. The water contact angle of thermoplastic starch film reinforced with chitosan-SiO₂ nanoparticles was 44.13 ± 5.02° and had a good mechanical property with tensile strength of 8.91 ± 0.49 MPa. This study indicates that chitosan-SiO₂ nanoparticles could be used as a reinforcement to prepare thermoplastic starch films and promote the application of chitosan nanoparticles in nanocomposite films.

Effect of plasticizers on physical, thermal, and tensile properties of thermoplastic films based on Dioscorea hispida starch

This study examines the effects of varying the concentrations of sorbitol (S) and glycerol (G) on the physical, morphological, thermal, and mechanical properties of Dioscorea hispida, starch-based films. In this context, the films of Dioscorea hispida starch were developed using solution casting technique with glycerol (G), sorbitol (S), and a mixture of sorbitol-glycerol (SG) as plasticizers at the ratios of 0, 30, 45, and 60 wt%. The films' moisture contents were increased when increasing the plasticizer contents. The tensile strengths were decreased, but elongations at break were increased; 7.38%-11.54% for G-plasticized films, 10.17%-15.76% for S-plasticized films, and 14.41%- 16.10% for SG-plasticized films with increasing plasticizer concentrations of the film samples. Varying plasticizer concentrations exhibited a minor effect on the S-plasticized film's thermal properties. Significant decrement in the glass transition temperatures of Dioscorea hispida starch films was observed when the plasticizer contents were raised from 30% to 60%. Significantly, the present work has shown that plasticized Dioscorea hispida starch can be considered a promising biopolymer for the applications of biodegradable films.

Study of the effect of the addition of plasticizers on the physical properties of biodegradable films based on kefiran for potential application as food packaging

Spectroscopies analysis indicated that kefiran contains branched hexasaccharide repeating units. Neat kefiran films, 2 and 5% w/w of glycerol, d-glucitol, d-galactitol, d-mannitol, and d-limonene were incorporated as plasticizers. Neat and plasticized kefiran films were characterized by physical, thermal, mechanical, optical, and water solubilization properties. Neat kefiran had a glass transition temperature (T_g) of -20 ± 2 °C and, with the addition of plasticizers between -15 to -17 ± 2 °C. The values were close to the neat kefiran, and the results could be attributed to a lower amount of plasticizer used. The solubility of the glycerol plasticized films increases by 33% and decreased with the concentration of other plasticizers in comparison with the neat kefiran. d-glucitol and d-galactitol decreased the microhardness and Young's Modulus of films around 30% and 74% respectively, obtaining more flexible kefiran films. Kefiran based films could find applications as potential materials in the food-packaging industry.

Recent Developments in Smart Food Packaging Focused on Biobased and Biodegradable Polymers

Food packaging has a crucial function in the modern food industry. New food packaging technologies seek to meet consumers and industrial's demands. Changes related to food production, sale practices and consumers' lifestyles, along with environmental awareness and the advance in new areas of knowledge (such as nanotechnology or biotechnology), act as driving forces to develop smart packages that can extend food shelf-life, keeping and supervising their innocuousness and quality and also taking care of the environment. This review describes the main concepts and types of active and intelligent food packaging, focusing on recent progress and new trends using biodegradable and biobased polymers. Numerous studies show the great possibilities of these materials. Future research needs to focus on some important aspects such as possibilities to scale-up, costs, regulatory aspects, and consumers' acceptance, to make these systems commercially viable.

Antioxidant and UV-Blocking Properties of a Carboxymethyl Cellulose-Lignin Composite Film Produced from Oil Palm Empty Fruit Bunch

Oil palm empty fruit bunch (EFB) pulp with the highest cellulose content of 83.42% was obtained from an optimized process of acid pretreatment (0.5% v/v H2SO4), alkaline extraction (15% w/w NaOH), and hydrogen peroxide bleaching (10% w/v H2O2), respectively. The EFB cellulose was carboxymethylated, and the obtained carboxymethyl cellulose (CMC) was readily water-soluble (81.32%). The EFB CMC was blended with glycerol and cast into a composite film. Lignin that precipitated from the EFB black liquor was also incorporated into the film at different concentrations, and its effect on the UV-blocking properties of the film was determined. Interestingly, the EFB CMC film without lignin addition completely blocked UV-B transmittance. The incorporation of lignin at all concentrations significantly enhanced the UV-A blocking and other physical properties of the film, including the surface roughness, thickness, and thermal stability, although the tensile strength and water vapor permeability were not significantly affected. Complete UV-A and UV-B blocking were observed when lignin was added at 0.2% (w/v), and the film also exhibited the highest antioxidant activity against 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radicals with an half-maximal inhibitory concentration (IC50) value of 3.87 mg mL-1.

Antibacterial activity, optical, and functional properties of corn starch-based films impregnated with bamboo leaf volatile oil

In this study, the optical, morphological, antibacterial, and physical properties of corn starch-based films prepared by a solution casting method were investigated after adding various levels of bamboo leaf volatile oil (BVO, 0.5, 1, and 2%). Further, the roughness was measured by atomic force microscopy and the antibacterial activities were tested by agar diffusion method. We found that the thickness (TC) and elongation at break (EAB) of the corn starch-based films increased significantly (Duncan's range test, P < 0.05) with the addition of BVO (TC from 0.121 to 0.207 mm; EAB from 2.48 to 10.40%). However, with the addition of BVO, the moisture content (MC) and water-solubility decreased (MC: from 13.12 to 11.41%; water solubility: from 30.58 to 26.95%), and the water vapor permeability (WVP) and tensile strength (TS) decreased significantly (WVP: from 3.91 to 3.05 g m m-2 s-1 Pa-1; TS: from 20.64 to 10.68 MPa, Duncan's range test, P < 0.05). Furthermore, supplementation of BVO to corn starch-based films increased the surface roughness and the antibacterial effects. The addition of BVO also increases the opacity of the films, which is helpful to protect food from ultraviolet damage. In sum, this study provides a theoretical basis for using corn starch-based films as alternative packing biomaterial.

Chitosan-riboflavin composite film based on photodynamic inactivation technology for antibacterial food packaging

Photodynamic inactivation (PDI) is a novel sterilization technology that has proven effective in medicine. This study focused on applying PDI to food packaging, where chitosan (CS) films containing photosensitizing riboflavin (RB) were prepared via solution casting. The CS-RB composite films exhibited good ultraviolet (UV)-barrier properties, and had a visually appealing highly transparent yellow appearance. Scanning electron microscopy (SEM) confirmed even dispersion of RB throughout the CS film. The addition of RB led to improved film characteristics, including the thickness, mechanical properties, solubility, and water barrier properties. The CS-RB⁵ composite films produced sufficient singlet oxygen under blue LED irradiation for 2 h to inactivate two food-borne pathogens (Listeria monocytogenes and Vibrio parahaemolyticus) and one spoilage bacteria (Shewanella baltica). The CS-RB composite films were assessed as a salmon packaging material, where inhibition of bacterial growth was observed. The film is biodegradable, and has the potential to alleviate the issues associated with the excessive use of petrochemical materials, such as environmental pollution and limited resources. The CS-RB composite films showed potential as a novel environmentally friendly packaging material for shelf-life extension of refrigerated food products.

Pectin-Based Films with Cocoa Bean Shell Waste Extract and ZnO/Zn-NPs with Enhanced Oxygen Barrier, Ultraviolet Screen and Photocatalytic Properties

In this work, pectin-based active films with a cocoa bean shell extract, obtained after waste valorisation of residues coming from the chocolate production process, and zinc oxide/zinc nanoparticles (ZnO/Zn-NPs) at different concentrations, were obtained by casting. The effect of the active additive incorporation on the thermal, barrier, structural, morphological and optical properties was investigated. Moreover, the photocatalytic properties of the obtained films based on the decomposition of methylene blue (MB) in aqueous solution at room temperature were also studied. A significant increase in thermal and oxidative stability was obtained with the incorporation of 3 wt% of ZnO/Zn-NPs compared to the control film. The addition of 5 wt% cocoa bean shell extract to pectin significantly affected the oxygen barrier properties due to a plasticizing effect. In contrast, the addition of ZnO/Zn-NPs at 1 wt% to pectin caused a decrease in oxygen transmission rate per film thickness (OTR.e) values of approximately 50% compared to the control film, resulting in an enhanced protection against oxidation for food preservation. The optical properties were highly influenced by the incorporation of the natural extract but this effect was mitigated when nanoparticles were also incorporated into pectin-based films. The addition of the extract and nanoparticles resulted in a clear improvement (by 98%) in UV barrier properties, which could be important for packaged food sensitive to UV radiation. Finally, the photocatalytic activity of the developed films containing nanoparticles was demonstrated, showing photodegradation efficiency values of nearly 90% after 60 min at 3 wt% of ZnO/Zn-NPs loading. In conclusion, the obtained pectin-based bionanocomposites with cocoa bean shell waste extract and zinc oxide/zinc nanoparticles showed great potential to be used as active packaging for food preservation.