Drug–polymer intermolecular interactions in hot-melt extruded solid dispersions

The Impact of Various Poly(vinylpyrrolidone) Polymers on the Crystallization Process of Metronidazole

In this paper, we propose one-step synthetic strategies for obtaining well-defined linear and star-shaped polyvinylpyrrolidone (linPVP and starPVP). The produced macromolecules and a commercial PVP K30 with linear topology were investigated as potential matrices for suppressing metronidazole (MTZ) crystallization. Interestingly, during the formation of binary mixtures (BMs) containing different polymers and MTZ, we found that linear PVPs exhibit maximum miscibility with the drug at a 50:50 weight ratio (w/w), while the star-shaped polymer mixes with MTZ even at a 30:70 w/w. To explain these observations, comprehensive studies of MTZ-PVP formulations with various contents of both components were performed using Fourier-transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction. The obtained results clearly showed that the polymer's topology plays a significant role in the type of interactions occurring between the matrix and MTZ. Additionally, we established that for MTZ-PVP 50:50 and 75:25 w/w BMs, linear polymers have the most substantial impact on inhibiting the crystallization of API. The star-shaped macromolecule turned out to be the least effective in stabilizing amorphous MTZ at these polymer concentrations. Nevertheless, long-term structural investigations of the MTZ-starPVP 30:70 w/w system (which is not achievable for linear PVPs) demonstrated its complete amorphousness for over one month.

Analysis of stabilization mechanisms in β-lactoglobulin-based amorphous solid dispersions by experimental and computational approaches

Our previous work shows that β-lactoglobulin-stabilized amorphous solid dispersion (ASD) loaded with 70 % indomethacin remains stable for more than 12 months. The stability is probably due to hydrogen bond networks spread throughout the ASD, facilitated by the indomethacin which has both hydrogen donors and acceptors. To investigate the stabilization mechanisms further, here we tested five other drug molecules, including two without any hydrogen bond donors. A combination of experimental techniques (differential scanning calorimetry, X-ray power diffraction) and molecular dynamics simulations was used to find the maximum drug loadings for ASDs with furosemide, griseofulvin, ibuprofen, ketoconazole and rifaximin. This approach revealed the underlying stabilization factors and the capacity of computer simulations to predict ASD stability. We searched the ASD models for crystalline patterns, and analyzed diffusivity of the drug molecules and hydrogen bond formation. ASDs loaded with rifaximin and ketoconazole remained stable for at least 12 months, even at 90 % drug loading, whereas stable drug loadings for furosemide, griseofulvin and ibuprofen were at a maximum of 70, 50 and 40 %, respectively. Steric confinement and hydrogen bonding to the proteins were the most important stabilization mechanisms at low drug loadings (≤ 40 %). Inter-drug hydrogen bond networks (including those with induced donors), ionic interactions, and a high Tg of the drug molecule were additional factors stabilizing the ASDs at drug loading greater than 40 %.

Polymorphic transitions in flufenamic acid-trehalose composites

The combination of poorly-soluble drugs with small molecule co-formers to generate amorphous solid dispersions (ASDs) has great potential to improve dissolution rate and kinetic solubility, and thus increase the bioavailability of these active ingredients. However, such ASDs are known to be unstable and to crystallise upon storage or heating. In this work, we explore the crystallisation of flufenamic acid (FFA) from ASDs prepared with trehalose. FFA-trehalose mixtures were prepared at a range of w/w composition ratios, heated to melting and crash cooled to form ASDs. They were then subject to a further heat/cool cycle, which was monitored by simultaneous differential scanning calorimetry - X-ray diffraction to observe the phase changes occurring. These varied with the composition of the blend. Upon short-term storage, formulations with low trehalose contents (FFA:trehalose 5:1 w/w) recrystallised into form I FFA, while higher trehalose contents crystallised to FFA form IV. When heated, all FFA trehalose combinations ultimately recrystallised into form I before melting. Upon a second cooling cycle, systems with low trehalose content (FFA:trehalose 5:1 w/w) recrystallised into form IV, while higher trehalose contents led to FFA form I. It is thus clear that even with a single excipient it is possible to control the crystallisation pathway through judicious choice of the formulation parameters.

Can Pure Predictions of Activity Coefficients from PC-SAFT Assist Drug-Polymer Compatibility Screening?

The bioavailability of poorly water-soluble active pharmaceutical ingredients (APIs) can be improved via the formulation of an amorphous solid dispersion (ASD), where the API is incorporated into a suitable polymeric carrier. Optimal carriers that exhibit good compatibility (i.e., solubility and miscibility) with given APIs are typically identified through experimental means, which are routinely labor- and cost-inefficient. Therefore, the perturbed-chain statistical associating fluid theory (PC-SAFT) equation of state, a popular thermodynamic model in pharmaceutical applications, is examined in terms of its performance regarding the computational pure prediction of API-polymer compatibility based on activity coefficients (API fusion properties were taken from experiments) without any binary interaction parameters fitted to API-polymer experimental data (that is, kij = 0 in all cases). This kind of prediction does not need any experimental binary information and has been underreported in the literature so far, as the routine modeling strategy used in the majority of the existing PC-SAFT applications to ASDs comprised the use of nonzero kij values. The predictive performance of PC-SAFT was systematically and thoroughly evaluated against reliable experimental data for almost 40 API-polymer combinations. We also examined the effect of different sets of PC-SAFT parameters for APIs on compatibility predictions. Quantitatively, the total average error calculated over all systems was approximately 50% in the weight fraction solubility of APIs in polymers, regardless of the specific API parametrization. The magnitude of the error for individual systems was found to vary significantly from one system to another. Interestingly, the poorest results were obtained for systems with self-associating polymers such as poly(vinyl alcohol). Such polymers can form intramolecular hydrogen bonds, which are not accounted for in the PC-SAFT variant routinely applied to ASDs (i.e., that used in this work). However, the qualitative ranking of polymers with respect to their compatibility with a given API was reasonably predicted in many cases. It was also predicted correctly that some polymers always have better compatibility with the APIs than others. Finally, possible future routes to improve the cost-performance ratio of PC-SAFT in terms of parametrization are discussed.

A prediction system: Regulating effect of small-molecule additives on properties of amorphous solid dispersions prepared by hot-melt extrusion technology

Amorphous solid dispersions (ASDs) with solubility advantage are suffering from the recrystallization risk and subsequent reduced dissolution triggered by high hygroscopicity of hydrophilic polymers and the supersaturation of ASD solutions. To address these issues, in this study, small-molecule additives (SMAs) in the Generally Recognized as Safe (GRAS) list were introduced into drug-polymer ASD. For the first time, we systematically revealed the intrinsic correlation between SMAs and properties of ASDs at the molecular level and constructed a prediction system for the regulation of properties of ASDs. The types and dosages of SMAs were screened by Hansen solubility and Flory-Huggins interaction parameters, as well as differential scanning calorimetry. X-ray photoelectron spectroscopy and adsorption energy (Eabs) calculation showed that the surface group distribution of ASDs and Eabs between ASD system and solvent were vital factors affecting the hygroscopicity and then stability. The radial distribution function revealed that interactions between components were proposed to be the critical factor for the dissolution performance. Based on this, a prediction system for regulating the properties of ASDs was successfully constructed mainly via molecular dynamics simulations and simple solid-state characterizations, and then validated by cases, which efficiently reduces the time and economic cost of pre-screening ASDs.

Advances in the development of amorphous solid dispersions: The role of polymeric carriers

Amorphous solid dispersion (ASD) is one of the most effective approaches for delivering poorly soluble drugs. In ASDs, polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level. To prepare the solid dispersions, there are many polymers with various physicochemical and thermochemical characteristics available for use in ASD formulations. Polymer selection is of great importance because it influences the stability, solubility and dissolution rates, manufacturing process, and bioavailability of the ASD. This review article provides a comprehensive overview of ASDs from the perspectives of physicochemical characteristics of polymers, formulation designs and preparation methods. Furthermore, considerations of safety and regulatory requirements along with the studies recommended for characterizing and evaluating polymeric carriers are briefly discussed.

Influence of Poloxamer on the Dissolution and Stability of Hot-Melt Extrusion-Based Amorphous Solid Dispersions Using Design of Experiments

The current study aimed to see the effects of poloxamer P407 on the dissolution performance of hydroxypropyl methylcellulose acetate succinate (AquaSolve™ HPMC-AS HG)-based amorphous solid dispersions (ASD). A weakly acidic, poorly water-soluble active pharmaceutical ingredient (API), mefenamic acid (MA), was selected as a model drug. Thermal investigations, including thermogravimetry (TG) and differential scanning calorimetry (DSC), were conducted for raw materials and physical mixtures as a part of the pre-formulation studies and later to characterize the extruded filaments. The API was blended with the polymers using a twin shell V-blender for 10 min and then extruded using an 11-mm twin-screw co-rotating extruder. Scanning electron microscopy (SEM) was used to study the morphology of the extruded filaments. Furthermore, Fourier-transform infrared spectroscopy (FT-IR) was performed to check the intermolecular interactions of the components. Finally, to assess the in vitro drug release of the ASDs, dissolution testing was conducted in phosphate buffer (0.1 M, pH 7.4) and hydrochloric acid-potassium chloride (HCl-KCl) buffer (0.1 M, pH 1.2). The DSC studies confirmed the formation of the ASDs, and the drug content of the extruded filaments was observed to be within an acceptable range. Furthermore, the study concluded that the formulations containing poloxamer P407 exhibited a significant increase in dissolution performance compared to the filaments with only HPMC-AS HG (at pH 7.4). In addition, the optimized formulation, F3, was stable for over 3 months when exposed to accelerated stability studies.

Release Kinetics Model Fitting of Drugs with Different Structures from Viscose Fabric

(1) Background: It is simpler and more environmentally friendly to use supercritical CO₂ fluid technology to process skincare viscose fabrics. Therefore, it is significant to study the release properties of drug-loaded viscose fabrics to choose suitable skincare drugs. In this work, the release kinetics model fittings were investigated in order to clarify the release mechanism and provide a theoretical basis for processing skincare viscose fabrics with supercritical CO₂ fluid. (2) Methods: Nine kinds of drugs with different substituent groups, different molecular weights, and different substitution positions were loaded onto viscose fabrics using supercritical CO₂ fluid. Then, the drug-loaded viscose fabrics were placed in an ethanol medium, and the release curves were drawn. Finally, the release kinetics were fitted using zero-order release kinetics, the first-order kinetics model, the Higuchi model, and the Korsmeyer-Peppas model. (3) Results: The Korsmeyer-Peppas model was the best-fitting model for all the drugs. Drugs with different substituent groups were released via a non-Fickian diffusion mechanism. On the contrary, other drugs were released via a Fickian diffusion mechanism. (4) Conclusions: In view of the release kinetics, it was found that the viscose fabric can swell when a drug with a higher solubility parameter is loaded onto it using supercritical CO₂ fluid, and the release rate is also slower.

Amorphous Pterostilbene Delivery Systems Preparation-Innovative Approach to Preparation Optimization

The aim of our research was to improve the solubility and antioxidant activity of pterostilbene (PTR) by developing a novel amorphous solid dispersion (ASD) with Soluplus^® (SOL). DSC analysis and mathematical models were used to select the three appropriate PTR and SOL weight ratios. The amorphization process was carried out by a low-cost and green approach involving dry milling. An XRPD analysis confirmed the full amorphization of systems in 1:2 and 1:5 weight ratios. One glass transition (T_g) observed in DSC thermograms confirmed the complete miscibility of the systems. The mathematical models indicated strong heteronuclear interactions. SEM micrographs suggest dispersed PTR within the SOL matrix and a lack of PTR crystallinity, and showed that after the amorphization process, PTR-SOL systems had a smaller particle size and larger surface area compared with PTR and SOL. An FT-IR analysis confirmed that hydrogen bonds were responsible for stabilizing the amorphous dispersion. HPLC studies showed no decomposition of PTR after the milling process. PTR's apparent solubility and antioxidant activity after introduction into ASD increased compared to the pure compound. The amorphization process improved the apparent solubility by ~37-fold and ~28-fold for PTR-SOL, 1:2 and 1:5 w/w, respectively. The PTR-SOL 1:2 w/w system was preferred due to it having the best solubility and antioxidant activity (ABTS: IC₅₀ of 56.389 ± 0.151 µg·mL^-1 and CUPRAC: IC_0.5 of 82.52 ± 0.88 µg·mL^-1).

Continuous Manufacturing and Molecular Modeling of Pharmaceutical Amorphous Solid Dispersions

Amorphous solid dispersions enhance solubility and oral bioavailability of poorly water-soluble drugs. The escalating number of drugs with poor aqueous solubility, poor dissolution, and poor oral bioavailability is an unresolved problem that requires adequate interventions. This review article highlights recent solubility and bioavailability enhancement advances using amorphous solid dispersions (ASDs). The review also highlights the mechanism of enhanced dissolution and the challenges faced by ASD-based products, such as stability and scale-up. The role of process analytical technology (PAT) supporting continuous manufacturing is highlighted. Accurately predicting interactions between the drug and polymeric carrier requires long experimental screening methods, and this is a space where computational tools hold significant potential. Recent advancements in data science, computational tools, and easy access to high-end computation power are set to accelerate ASD-based research. Hence, particular emphasis has been given to molecular modeling techniques that can address some of the unsolved questions related to ASDs. With the advancement in PAT tools and artificial intelligence, there is an increasing interest in the continuous manufacturing of pharmaceuticals. ASDs are a suitable option for continuous manufacturing, as production of a drug product from an ASD by direct compression is a reality, where the addition of multiple excipients is easy to avoid. Significant attention is necessary for ongoing clinical studies based on ASDs, which is paving the way for the approval of many new ASDs and their introduction into the market.

Monitoring Polymorphic Phase Transitions in Flufenamic Acid Amorphous Solid Dispersions Using Hyphenated X-ray Diffraction-Differential Scanning Calorimetry

Flufenamic acid (FFA) is a highly polymorphic drug molecule with nine crystal structures reported in the Cambridge Structural Database. This study explores the use of synchrotron X-ray powder diffraction combined with differential scanning calorimetry to study crystallization and polymorphic phase transitions upon heating FFA–polymer amorphous solid dispersions (ASDs). Ethyl cellulose (EC, 4 cp) and hydroxypropylmethylcellulose (HPMC) grades with different viscosities and substitution patterns were used to prepare dispersions with FFA at 5:1, 2:1, 1:1, and 1:5 w/w drug/polymer ratios by quench cooling. We employed a 6 cp HPMC 2910 material and two HPMC 2208 samples at 4000 and 100 000 cp. Hyphenated X-ray diffraction (XRD)–differential scanning calorimetry (DSC) studies show that the 6 and 100 000 cp HPMCs and 4 cp EC polymers can stabilize FFA form IV by inhibiting the transition to form I during heating. It appears that the polymers stabilize FFA in both amorphous and metastable forms via a combination of intermolecular interactions and viscosity effects. Increasing the polymer content of the ASD also inhibits polymorphic transitions, with drug/polymer ratios of 1:5 w/w resulting in FFA remaining amorphous during heating. The comparison of FFA ASDs prepared with different samples of HPMCs and ECs suggests that the chemical substitution of the polymer (HPMC 2208 has 19–24% methoxy groups and 4–12% hydroxypropyl groups, while HPMC 2910 has 28–30% methoxy groups and 7–12% hydroxypropyl groups) plays a more significant role in directing polymorphic transitions than the viscosity. A previously unreported polymorph of FFA was also noted during heating but its structure could not be determined.

Pharmaceutical profiling and molecular dynamics simulations reveal crystallization effects in amorphous formulations

Robust and reliable in vivo performance of medicines based on amorphous solid dispersions (ASDs) depend on maintenance of physical stability and efficient supersaturation. However, molecular drivers of these two kinetic processes are poorly understood. Here we used molecular dynamics (MD) simulations coupled with experimental assessments to explore supersaturation, nucleation, and crystal growth. The effect of drug loading on physical stability and supersaturation potential was highly drug specific. Storage under humid conditions influenced crystallization, but also resulted in morphological changes and particle fusion. This led to increased particle size, which significantly reduced dissolution rate. MD simulations identified the importance of nano-compartmentalization in the crystallization rate of the ASDs. Nucleation during storage did not inherently compromise the ASD. Rather, the poorer performance resulted from a combination of properties of the compound, nanostructures formed in the formulation, and crystallization.

Polyelectrolyte Matrices in the Modulation of Intermolecular Electrostatic Interactions for Amorphous Solid Dispersions: A Comprehensive Review

Polyelectrolyte polymers have been widely used in the pharmaceutical field as excipients to facilitate various drug delivery systems. Polyelectrolytes have been used to modulate the electrostatic environment and enhance favorable interactions between the drug and the polymer in amorphous solid dispersions (ASDs) prepared mainly by hot-melt extrusion. Polyelectrolytes have been used alone, or in combination with nonionic polymers as interpolyelectrolyte complexes, or after the addition of small molecular additives. They were found to enhance physical stability by favoring stabilizing intermolecular interactions, as well as to exert an antiplasticizing effect. Moreover, they not only enhance drug dissolution, but they have also been used for maintaining supersaturation, especially in the case of weakly basic drugs that tend to precipitate in the intestine. Additional uses include controlled and/or targeted drug release with enhanced physical stability and ease of preparation via novel continuous processes. Polyelectrolyte matrices, used along with scalable manufacturing methods in accordance with green chemistry principles, emerge as an attractive viable alternative for the preparation of ASDs with improved physical stability and biopharmaceutic performance.

Eudragit®: A Versatile Family of Polymers for Hot Melt Extrusion and 3D Printing Processes in Pharmaceutics

Eudragit® polymers are polymethacrylates highly used in pharmaceutics for the development of modified drug delivery systems. They are widely known due to their versatility with regards to chemical composition, solubility, and swelling properties. Moreover, Eudragit polymers are thermoplastic, and their use has been boosted in some production processes, such as hot melt extrusion (HME) and fused deposition modelling 3D printing, among other 3D printing techniques. Therefore, this review covers the studies using Eudragit polymers in the development of drug delivery systems produced by HME and 3D printing techniques over the last 10 years. Eudragit E has been the most used among them, mostly to formulate immediate release systems or as a taste-masker agent. On the other hand, Eudragit RS and Eudragit L100-55 have mainly been used to produce controlled and delayed release systems, respectively. The use of Eudragit polymers in these processes has frequently been devoted to producing solid dispersions and/or to prepare filaments to be 3D printed in different dosage forms. In this review, we highlight the countless possibilities offered by Eudragit polymers in HME and 3D printing, whether alone or in blends, discussing their prominence in the development of innovative modified drug release systems.

Preparation of Solid Dispersions of Simvastatin and Soluplus Using a Single-Step Organic Solvent-Free Supercritical Fluid Process for the Drug Solubility and Dissolution Rate Enhancement

The study was designed to investigate the feasibility of supercritical carbon dioxide (scCO₂) processing for the preparation of simvastatin (SIM) solid dispersions (SDs) in Soluplus^® (SOL) at temperatures below polymer’s glass transition. The SIM content in the SDs experimental design was kept at 10, 20 and 30% to study the effect of the drug–polymer ratio on the successful preparation of SDs. The SIM–SOL formulations, physical mixtures (PMs) and SDs were evaluated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and dissolution studies. The scCO₂ processing conditions and drug–polymer ratio were found to influence the physicochemical properties of the drug in formulated SDs. SIM is a highly crystalline drug; however, physicochemical characterisation carried out by SEM, DSC, and XRD demonstrated the presence of SIM in amorphous nature within the SDs. The SIM–SOL SDs showed enhanced drug dissolution rates, with 100% being released within 45 min. Moreover, the drug dissolution from SDs was faster and higher in comparison to PMs. In conclusion, this study shows that SIM–SOL dispersions can be successfully prepared using a solvent-free supercritical fluid process to enhance dissolution rate of the drug.

Benzoic acid complexes with Eudragit E100®: New alternative antimicrobial preservatives

Given that the use of some preservatives in cosmetics has been restricted, novel alternative preservatives are needed. The aim of this study was to characterize the physicochemical and antimicrobial properties of two polyelectrolyte complexes (EuB₁₀₀ and EuB₇₅Cl₂₅), which were developed through hot melt extrusion (HME) using benzoic acid (BA) and Eudragit E100. Based on phase diagrams and an experimental statistical design, the solubility of the acid in the polymer and the HME conditions were established. Intermolecular interactions were evaluated through Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and X-ray powder diffraction (XRPD). Release behavior was determined for the systems. Antibacterial activity and ζ-potential were determined on Escherichia coli. FTIR revealed acid-base interaction, and XPS showed that the percentages of protonated nitrogen N1s were 13.5% for EuB₁₀₀ and 20.3% for EuB₇₅Cl₂₅. The BA released showed a non-Fickian behavior, and a satisfactory antibacterial activity against E. coli was demonstrated at pH 6.9. The complexes modified ζ-potential, destabilizing the membrane functionality of E. coli. These complexes are potential antimicrobial preservatives with a greater spectrum of action, with bactericidal activity against E. coli in a wider pH range than uncomplexed BA, even at pH 6.9.

Injection-Molded Coamorphous Tablets: Analysis of Intermolecular Interaction and Crystallization Propensity

The processing steps involved in converting from a powder to a tablet entail numerous operations in a which the coamorphous system is recrystallized and dissociated easily. This research focused on (i) a single-step preparation of a coamorphous tablet during injection molding (IM) from the bulk powder, and (ii) a mechanistic characterization of the coamorphous formulation. We selected several organic acids [citric acid, succinic acid, tartaric acid, and malic acid] in an effort to compound with basic loratadine (a poorly water-soluble drug). Loratadine-acids coamorphous tablets were produced via an IM process, and the dissolution was more enhanced than in the pure loratadine amorphous. The interaction was analyzed by FT-IR and terahertz spectroscopies. Each tablet was stored at 40 °C/75%RH, and then XRD patterns were acquired at the desired timepoints. In summary, loratadine exhibited ionic interaction with each acid, and the physical stability of the coamorphous tablet was in proportion to the loratadine-acids interaction strength. Terahertz spectra detected the molecular mobility, which plays an important role in the crystallization propensity of a coamorphous system. This understanding offers a framework for robust coamorphous tablet formulation using the IM methodology.

Analytical and Computational Methods for the Determination of Drug-Polymer Solubility and Miscibility

In the pharmaceutical industry, poorly water-soluble drugs require enabling technologies to increase apparent solubility in the biological environment. Amorphous solid dispersion (ASD) has emerged as an attractive strategy that has been used to market more than 20 oral pharmaceutical products. The amorphous form is inherently unstable and exhibits phase separation and crystallization during shelf life storage. Polymers stabilize the amorphous drug by antiplasticization, reducing molecular mobility, reducing chemical potential of drug, and increasing glass transition temperature in ASD. Here, drug-polymer miscibility is an important contributor to the physical stability of ASDs. The current Review discusses the basics of drug-polymer interactions with the major focus on the methods for the evaluation of solubility and miscibility of the drug in the polymer. Methods for the evaluation of drug-polymer solubility and miscibility have been classified as thermal, spectroscopic, microscopic, solid-liquid equilibrium-based, rheological, and computational methods. Thermal methods have been commonly used to determine the solubility of the drug in the polymer, while other methods provide qualitative information about drug-polymer miscibility. Despite advancements, the majority of these methods are still inadequate to provide the value of drug-polymer miscibility at room temperature. There is still a need for methods that can accurately determine drug-polymer miscibility at pharmaceutically relevant temperatures.

Solubilizing temperature of crystalline drug in polymer carrier: A rheological investigation on a posaconazole-copovidone system with low drug load

Measuring the solubility of a crystalline active pharmaceutical ingredient (API) in a polymer-rich system is challenging due to the high viscosity of the polymer which kinetically impedes reaching the solubility equilibrium. In this study, a rheological approach of determining the solubilizing temperature of a crystalline API in a polymeric carrier has been developed. To validate the method, a model physical mixture of crystalline posaconazole and copovidone with a relatively low API load (25 wt%) was utilized. First, a comparison between conventional differential scanning calorimetry (DSC) and a rheological temperature ramp was conducted to illustrate that the rheological method could capture the melting point depression behavior similarly to the more well-known DSC technique. Second, to further understand the dissolution process of the crystalline posaconazole into the copovidone carrier and precisely measure the solubilizing temperature, a series of isothermal rheological time sweeps were carried out at various temperatures selected based on the rheological temperature sweep. Because the dissolved API molecule imparted a plasticizing effect to the polymeric carrier, the complex viscosity of the API-polymer system decreased gradually over time and correlated well to an exponential decay function. Moreover, dependent on the applied temperature, the API-polymer system eventually accomplished distinct equilibrium states (complex viscosities) within different time frames. The obtained time constants at different temperatures were fitted to the Arrhenius equation, allowing the determination of the activation energy of the mixing process. The results indicated that once the processing temperature exceeded a critical point below the melting point of the crystalline API, the API-polymer solubilization process switched from a surface dominated dispersive mechanism to a molecular-level solubilization mode, manifested by the significantly increased activation energy. To the best of our knowledge, the currently developed rheological approach was the first successful measurement of the solubilizing temperature of a crystalline drug in a polymer-rich system.

Comparative taste-masking evaluation of microencapsulated bitter drugs using Smartseal 30D and ReadyMix for paediatric dosage forms

The taste of drug substances plays a key role in the development of paediatric formulations with suitable organoleptic properties. The aim of the study was to evaluate the taste masking effectiveness of Smartseal 30D and ReadyMix on a range of bitter drug substances such as diphenhydramine HCl (DPD), ibuprofen lysine (IBU-LS), and phenylephrine HCl (PPH) for the development of paediatric dosage forms. The drugs were microencapsulated in the polymer carriers at 10-20% loadings using spray-drying processing. Spray drying of drug formulations was optimized in terms of percent yield and encapsulation efficiency followed by physicochemical characterization in order to identify the drugs' physical state in the polymer microparticles. The in vivo taste masking efficiency was evaluated using human test panel and showed noticeable reduction of drug's bitterness at all loadings in comparison to the bulk substances.

Multicomponent crystalline solid forms of aripiprazole produced via hot melt extrusion techniques: An exploratory study

Multicomponent crystalline solid forms (salts, cocrystals and eutectics) are a promising means of enhancing the dissolution behavior of poorly soluble drugs. The present study demonstrates the development of multicomponent solid forms of aripiprazole (ARP) prepared with succinic acid (SA) and nicotinamide (NA) as coformers using the hot melt extrusion (HME) technique. The HME-processed samples were characterized and analyzed using differential scanning calorimetry (DSC), hot stage microscopy (HSM), Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). The DSC and HSM analyses revealed a characteristic single melting temperature in the solid forms, which differed from the melting points of the individual components. The discernible changes in the FTIR (amide C=O stretching) and PXRD results for ARP-SA confirm the formation of new crystalline solid forms. In the case of ARP-NA, these changes were less prominent, without the appearance or disappearance of peaks, suggesting no change in the crystal lattice. The SEM images demonstrated morphological differences between the HME-processed samples and the individual parent components. The in vitro dissolution and microenvironment pH measurement studies revealed that ARP-SA showed a higher dissolution rate, which could be due to the acidic microenvironment pH imparted by the coformer. The observations of the present study demonstrate the applicability of the HME technique for the development of ARP multicomponent solid forms.

Synergistic application of twin-screw granulation and selective laser sintering 3D printing for the development of pharmaceutical dosage forms with enhanced dissolution rates and physical properties

This study demonstrated the first case of combining a novel continuous granulation technique with powder-bed fusion-based selective laser sintering (SLS) process to enhance the dissolution rate and physical properties of a poorly water-soluble drug. Selective laser sintering and binder jetting 3D printing processes have gained much attention in pharmaceutical dosage form manufacturing in recent times. These powder bed-based 3D printing platforms have been known to face printing and uniformity problems due to the inherent poor flow properties of the pharmaceutical physical mixtures. To address this issue a hot-melt extrusion-based versatile granulation process equipped with a process analytical technology (PAT) tool for the in-line monitoring of critical quality attributes (i.e., solid-state) of indomethacin was developed. The collected granules with enhanced flow properties were mixed with Kollidon® VA64 and a conductive excipient for efficient sintering. These mixtures were further characterized for their bulk properties observing an excellent flow and later subjected to an SLS-3D printing process. The physical mixtures, processed granules, and printed tablets were characterized using conventional as well as advanced solid-state characterizations. These characterizations revealed the amorphous nature of the drug in the processed granules and printed tablets. Further, the in vitro release testing of the tablets with produced granules as a reference standard depicted a notable dissolution advantage (100% drug released in 5 min at >pH 6.8) over the pure drug and the physical mixture. Our developed system known as DosePlus combines innovative continuous granulation and SLS-3D printing process which can potentially improve the physical properties of the bulk drug and formulations in comparison to when used in isolation. This process can further find application in continuous manufacturing of granules and additive manufacturing of pharmaceuticals to produce dosage forms with excellent uniformity and solubility advantage.

The molecular design of drug-ionic liquids for transdermal drug delivery: Mechanistic study of counterions structure on complex formation and skin permeation

Though ionic liquids (ILs) as novel enhancers had garnered wide attention, detailed studies elucidating molecular design of drug-ILs were missing and mechanisms of their formation and skin permeation were still lacking. Herein, we systematically investigated effects of counterions structures on formation and skin permeation of drug-ILs. Firstly, effects of counterions on formation of drug-ILs were dependent on polarizability, molecular weight (M.W.) and polar surface area of counterions. It was caused by strong charge assisted hydrogen bond and van der Waals interactions revealed through FT-IR, X-ray photoelectron spectroscopy and molecular docking, which undermined ionic interactions and reduced total interaction strength, thereby produced lower lattice energy. Then, skin permeability of drug-ILs had a good parabola relationship with M.W., polarizability and log P of counterions. The underlying mechanism was the increased drug miscibility with stratum corneum, which caused conformational disorder and phase transition of lipid bilayers characterized by ATR-FTIR, DSC and confocal laser scanning microscopy. Finally, the drug-ILs proved to be non-irritating using in vivo skin erythema analysis. In conclusion, the quantitative structure-activity relationship models based on counterions structure to predict formation and skin permeation of drug-ILs were developed, which provided basic theory for design of drug-ILs with high permeation-enhancing efficiency.

Quaternary enteric solid dispersion prepared by hot-melt extrusion to mask the bitter taste and enhance drug stability

To mask the bitterness of drug is profoundly important especially in children's medication. This study designed and investigated a quaternary enteric solid dispersion (QESD) by secondary hot-melt-extrusion. Erythromycin (EM) was chosen as a model drug. The optimal QESD contained enteric polymer HPMCP-55, plasticizer and water-soluble polymer copovidone VA64. Raman and Atomic force microscope has exploited that majority EM was distributed in VA64 matrix, nanometer-sized EM-VA64 system was entrapped within enteric continuous phase to form a solid emulsion-like structure. For the prepared QESD, EM released concentration was far less than bitterness threshold (7 μg/mL to 20 μg/mL) in artificial saliva within the first 30 s. And dissolution rate was increased by 10% in article intestine fluid, which dominated by water-soluble VA64. Stress testing after two months at high-humidity (75% RH) and high-temperature (60 °C) revealed, compared with traditional enteric SDs, the chemical degradation of EM was slowed down in QESD. Furthermore, hydrogen and salt bonds were respectively formed between EM and VA64 and between leaking EM and HPMCP-55, which increasing the system stability and taste-masking. The effect of masking bitter taste can be satisfied as well as enhance drug dissolution rate in the intestine, and formulation physicochemical stability during storage.

Role of release modifiers to modulate drug release from fused deposition modelling (FDM) 3D printed tablets

Although hot melt extrusion (HME) has been used in combination with fused deposition modelling (FDM) three-dimensional printing (3DP), suitable feedstock materials such as polymeric filaments with optimum properties are still limited. In this study, various release modifying excipients, namely, poly(vinyl alcohol) (PVA), Soluplus®, polyethylene glycol (PEG) 6000, Eudragit® RL PO/RS PO, hydroxypropyl methylcellulose (HPMC) K4M/E10M/K100M, Kollidon® vinyl acetate 64 (VA 64)/17PF/30, were used as a release modulating tool to control the drug release from 3D printed sustained release tablets. Ibuprofen (as the model drug) and ethyl cellulose (as the polymeric matrix), along with various release modifiers, were blended and extruded into filaments through a twin-screw extruder. Then these filaments were printed into cylindrical tablets through FDM 3DP technique and their surface morphology, thermal stability, solid-state, mechanical properties, dose accuracy and drug release behaviors were investigated. The solid-state analysis of 3D printed tablets exhibited the amorphous nature of the drug dispersed in the polymer matrices. Although all these prepared filaments could be successfully printed without failing during the FDM 3DP process, the mechanical characterization showed that the filament stiffness and brittleness could be adjusted significantly by changing the type of release modifiers. Moreover, in vitro drug release studies revealed that the drug release could simply be controlled over 24 h by only changing the type of release modifiers. All ibuprofen (IBP) loaded 3D printed tablets with ethyl cellulose (EC) matrix, especially with PEG as the release modifier, showed great potential in releasing IBP in a zero-order reaction. In conclusion, all the results illustrated that the HME/FDM approach and optimized formulation compositions can be an attractive option for the development of pharmaceutical tablets and implants where adjustable drug release patterns are necessary.

Molecular Simulation and Statistical Learning Methods toward Predicting Drug-Polymer Amorphous Solid Dispersion Miscibility, Stability, and Formulation Design

Amorphous solid dispersions (ASDs) have emerged as widespread formulations for drug delivery of poorly soluble active pharmaceutical ingredients (APIs). Predicting the API solubility with various carriers in the API-carrier mixture and the principal API-carrier non-bonding interactions are critical factors for rational drug development and formulation decisions. Experimental determination of these interactions, solubility, and dissolution mechanisms is time-consuming, costly, and reliant on trial and error. To that end, molecular modeling has been applied to simulate ASD properties and mechanisms. Quantum mechanical methods elucidate the strength of API-carrier non-bonding interactions, while molecular dynamics simulations model and predict ASD physical stability, solubility, and dissolution mechanisms. Statistical learning models have been recently applied to the prediction of a variety of drug formulation properties and show immense potential for continued application in the understanding and prediction of ASD solubility. Continued theoretical progress and computational applications will accelerate lead compound development before clinical trials. This article reviews in silico research for the rational formulation design of low-solubility drugs. Pertinent theoretical groundwork is presented, modeling applications and limitations are discussed, and the prospective clinical benefits of accelerated ASD formulation are envisioned.

Selective Laser Sintering 3-Dimensional Printing as a Single Step Process to Prepare Amorphous Solid Dispersion Dosage Forms for Improved Solubility and Dissolution Rate

This study reports the development of ritonavir-copovidone amorphous solid dispersions (ASDs) and dosage forms thereof using selective laser sintering (SLS) 3-dimensional (3-D) printing in a single step, circumventing the post-processing steps required in common techniques employed to make ASDs. For this study, different drug loads of ritonavir with copovidone were processed at varying processing conditions to understand the impact, range, and correlation of these parameters for successful ASD formation. Further, ASDs characterized using conventional and advanced solid-state techniques including wide-angle X-ray scattering (WAXS), solid-state nuclear magnetic resonance (ssNMR), revealed the full conversion of the crystalline drug to its amorphous form as a function of laser-assisted selective fusion in a layer-by-layer manner. It was observed that an optimum combination of the powder flow properties, surface temperature, chamber temperature, laser speed, and hatch spacing was crucial for successful ASD formation, any deviations resulted in print failures or only partial amorphous conversion. Moreover, a 21-fold increase in solubility was demonstrated by the SLS 3-D printed tablets. The results confirmed that SLS 3-D printing can be used as a single-step platform for creating ASD-based pharmaceutical dosage forms with a solubility advantage.

Bioavailability Enhancement of Olmesartan Medoxomil Using Hot-Melt Extrusion: In-Silico, In-Vitro, and In-Vivo Evaluation

Olmesartan medoxomil (OLM) an antihypertensive molecule with poor solubility and poor bioavailability (26% when taken orally) was selected as a model drug. Herein, rationale development of amorphous solid dispersion with hot-melt extrusion of poorly bioavailable OLM was carried out with the aid of quality by design (QbD), in-silico, in-vitro, and in-vivo evaluations. Polymer selection commenced with the selection of thermoplastic water-soluble polymers with the compatible processing temperature window as per the thermal behavior of OLM. Molecular dynamics (MD) simulations as well assisted in the selection of a carrier. Promising dissolution enhancement was observed with the help of Kollidon VA-64 (VA-64) as a carrier. Optimization of the formulation was executed using the QbD approach with design of experiment as a statistical optimization tool. Interactions between VA-64 and OLM on the atomic level were studied with the help of atomistic MD simulations. Characterization of the optimized extrudates were carried out with scanning electron microscopy, atomic force microscopy, differential scanning calorimetry, thermogravimetric analysis, Fourier transforms infrared spectroscopy, powder X-ray diffraction, in-vitro dissolution study, and in-vivo pharmacokinetic studies. Molecular-level mixing of OLM with VA-64 resulted into glass solution formation which rapidly dissolves (28 times in-vitro dissolution enhancement) in GI tract fluids and instantly gets absorbed into blood circulation. In-vivo pharmacokinetic studies performed in Sprague-Dawley rats reflected superior bioavailability (201.60%) with a significant increase in the C_max with short T_max through amorphization of OLM. The in-silico results were in agreement with the observed results of in-vitro dissolution studies and in-vivo pharmacokinetic study.

Molecular Interactions in Solid Dispersions of Poorly Water-Soluble Drugs

Physicochemical characterization is a crucial step for the successful development of solid dispersions, including the determination of drug crystallinity and molecular interactions. Typically, the detection of molecular interactions will assist in the explanation of different drug performances (e.g., dissolution, solubility, stability) in solid dispersions. Various prominent reviews on solid dispersions have been reported recently. However, there is still no overview of recent techniques for evaluating the molecular interactions that occur within solid dispersions of poorly water-soluble drugs. In this review, we aim to overview common methods that have been used for solid dispersions to identify different bond formations and forces via the determination of interaction energy. In addition, a brief background on the important role of molecular interactions will also be described. The summary and discussion of methods used in the determination of molecular interactions will contribute to further developments in solid dispersions, especially for quick and potent drug delivery applications.

Insoluble Polymers in Solid Dispersions for Improving Bioavailability of Poorly Water-Soluble Drugs

In recent decades, solid dispersions have been demonstrated as an effective approach for improving the bioavailability of poorly water-soluble drugs, as have solid dispersion techniques that include the application of nanotechnology. Many studies have reported on the ability to change drug crystallinity and molecular interactions to enhance the dissolution rate of solid dispersions using hydrophilic carriers. However, numerous studies have indicated that insoluble carriers are also promising excipients in solid dispersions. In this report, an overview of solid dispersion strategies involving insoluble carriers has been provided. In addition to the role of solubility and dissolution enhancement, the perspectives of the use of these polymers in controlled release solid dispersions have been classified and discussed. Moreover, the compatibility between methods and carriers and between drug and carrier is mentioned. In general, this report on solid dispersions using insoluble carriers could provide a specific approach and/or a selection of these polymers for further formulation development and clinical applications.

Electrospun nanofibers: A nanotechnological approach for drug delivery and dissolution optimization in poorly water-soluble drugs

Electrospinning is a novel and sophisticated technique for the production of nanofibers with high surface area, extreme porous structure, small pore size, and surface morphologies that make them suitable for biomedical and bioengineering applications, which can provide solutions to current drug delivery issues of poorly water-soluble drugs. Electrospun nanofibers can be obtained through different methods asides from the conventional one, such as coaxial, multi-jet, side by side, emulsion, and melt electrospinning. In general, the application of an electric potential to a polymer solution causes a charged liquid jet that moves downfield to an oppositely charged collector, where the nanofibers are deposited. Plenty of polymers that differ in their origin, degradation character and water affinity are used during the process. Physicochemical properties of the drug, polymer(s), and solvent systems need to be addressed to guarantee successful manufacturing. Therefore, this review summarizes the recent progress in electrospun nanofibers for their use as a nanotechnological tool for dissolution optimization and drug delivery systems for poorly water-soluble drugs.

Probing the Molecular-Level Interactions in an Active Pharmaceutical Ingredient (API) - Polymer Dispersion and the Resulting Impact on Drug Product Formulation

PURPOSE

An investigation of underlying mechanisms of API-polymer interaction patterns has the potential to provide valuable insights for selecting appropriate formulations with superior physical stability and processability.

MATERIALS AND METHODS

In this study, copovidone was used as a polymeric carrier for several model compounds including clotrimazole, nifedipine, and posaconazole. The varied chemical structures conferred the ability for the model compounds to form distinct interactions with copovidone. Rheology and nuclear magnetic resonance (NMR) were combined to investigate the molecular pattern and relative strength of active pharmaceutical ingredient (API)-polymer interactions. In addition, the impact of the interactions on formulation processability via hot melt extrusion (HME) and physical stability were evaluated.

RESULTS

The rheological response of an API-polymer system was found to be highly sensitive to API-polymer interaction, depending both on API chemistry and API-polymer miscibility. In the systems studied, dispersed API induced a stronger plasticizer effect on the polymer matrix compared to crystalline/aggregated API. Correspondingly, the processing torque via HME showed a proportional relationship with the maximum complex viscosity of the API-polymer system. In order to quantitatively evaluate the relative strength of the API-polymer interaction, homogeneously dispersed API-polymer amorphous samples were prepared by HME at an elevated temperature. DSC, XRD, and rheology were employed to confirm the amorphous integrity and homogeneity of the resultant extrudates. Subsequently, the homogeneously dispersed API-polymer amorphous dispersions were interrogated by rheology and NMR to provide a qualitative and quantitative assessment of the nature of the API-polymer interaction, both macroscopically and microscopically. Rheological master curves of frequency sweeps of the extrudates exhibited a strong dependence on the API chemistry and revealed a rank ordering of the relative strength of API-copovidone interactions, in the order of posaconazole > nifedipine > clotrimazole. NMR data provided the means to precisely map the API-polymer interaction pattern and identify the specific sites of interaction from a molecular perspective. Finally, the impact of API-polymer interactions on the physical stability of the resultant extrudates was studied.

CONCLUSION

Qualitative and quantitative evaluation of the relative strength of the API-polymer interaction was successfully accomplished by utilizing combined rheology and NMR. Graphical Abstract.

Investigation into Intermolecular Interactions and Phase Behavior of Binary and Ternary Amorphous Solid Dispersions of Ketoconazole

Conventionally, amorphous solid dispersions (ASDs) have been formulated as a binary matrix, but in recent years a new class of ASDs has emerged, where generally a second polymer is also added to the formulation. Having the presence of a second polymer necessitates a comprehensive solid-state characterization to study the intermolecular interactions and phase behavior on a molecular level. With this goal in mind, ketoconazole (KET) was selected as a model drug, and hydroxypropyl methyl cellulose (HPMC) and poly(acrylic acid) (PAA) were chosen as polymeric carriers. The binary and ternary ASDs were characterized by differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, solid-state nuclear magnetic resonance (SSNMR) spectroscopy, and powder X-ray diffraction (PXRD). The binary KET:HPMC dispersions lacked any specific interactions, whereas binary KET:PAA dispersions and ternary KET:PAA:HPMC dispersions showed evidence for ionic and hydrogen bonding interactions. The ¹³C SSNMR deconvolution study established a comparison for molecular interactions between the binary KET:PAA and ternary KET:PAA:HPMC dispersions, with the binary KET:PAA system showing higher prevalence of ionic and hydrogen bonds than the ternary KET:PAA:HPMC system. Moreover, individual binary and ternary ASDs were found to be homogeneous on a nanometric level, implying the presence of a second polymer did not impact the phase homogeneity. In addition, a stronger interaction in binary KET:PAA and ternary KET:HPMC:PAA systems translated to better physical stability at different storage conditions. Through this case study it is recommended that a comprehensive investigation is needed to study the impact of using two polymers in ASD formulations in terms underlying intermolecular interactions and physical stability.

Manufacturing strategies to develop amorphous solid dispersions: An overview

Since the past several decades, poor water solubility of existing and new drugs in the pipeline have remained a challenging issue for the pharmaceutical industry. Literature describes several approaches to improve the overall solubility, dissolution rate, and bioavailability of drugs with poor water solubility. Moreover, the development of amorphous solid dispersion (SD) using suitable polymers and methods have gained considerable importance in the recent past. In the present review, we attempt to discuss the important and industrially scalable thermal strategies for the development of amorphous SD. These include both solvent (spray drying and fluid bed processing) and fusion (hot melt extrusion and KinetiSol®) based techniques. The current review also provides insights into the thermodynamic properties of drugs, their polymer miscibility and solubility, and their molecular dynamics to develop stable and more efficient amorphous SD.

Preparation and In vitro Evaluation of FDM 3D-Printed Ellipsoid-Shaped Gastric Floating Tablets with Low Infill Percentages

The aim of the study is to investigate the feasibility of fabricating FDM 3D-printed gastric floating tablets with low infill percentages and the effect of infill percentage on the properties of gastric floating tablets in vitro. Propranolol hydrochloride was selected as a model drug, and drug-loaded polyvinyl alcohol (PVA) filaments were produced by hot melt extrusion (HME). Ellipsoid-shaped gastric floating tablets with low infill percentage of 15% and 25% (namely E-15 and E-25) were then prepared respectively by feeding the extruded filaments to FDM 3D printer. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM) were employed to characterize the filaments and 3D-printed tablets, and a series of evaluations were performed to the 3D-printed tablets, including the weight variation, drug content, hardness, in vitro floating behavior, and drug release of the tablets. The SEM results showed that the drug-loaded filaments and 3D-printed tablets appeared intact without defects, and the printed tablets were composed of filaments deposited uniformly layer by layer. The model drug and the excipients were thermally stable under the process temperature of extruding and printing, with a small amount of drug crystals dispersing in the drug-loaded filaments and 3D-printed tablets. Both E-15 and E-25 could float on artificial gastric fluids without any lag time and released in a sustained manner. Compared with E-15, the E-25 presented less weight variation, higher tablet hardness, shorter floating time, and longer drug release time.

Novel olive oil phenolic (-)-oleocanthal (+)-xylitol-based solid dispersion formulations with potent oral anti-breast cancer activities

Epidemiological studies have compellingly documented the ability of the Mediterranean diet rich in extra-virgin olive oil to reduce the incidence of certain malignancies, and cardiovascular diseases, and slow the Alzheimer's disease progression. S-(-)-Oleocanthal (OC) was identified as the most bioactive olive oil phenolic with documented anti-inflammatory, anticancer, and anti-Alzheimer's activities. OC consumption causes irritating sensation at the oropharynx via activation of TRPA1. Accordingly, a taste-masked formulation of OC is needed for its future use as a nutraceutical while maintaining its bioactivity and unique chemistry. Therefore, the goal of this study was to prepare a taste-masked OC solid formulation with improved dissolution and pharmacodynamic profiles, by using (+)-xylitol as an inert carrier. Xylitol was hypothesized to serve as an ideal vehicle for the preparation of OC solid dispersions due to its low melting point and sweetness. The optimized OC-(+)-xylitol solid dispersion was physically and chemically characterized and showed effective taste masking and enhanced dissolution properties. Furthermore, OC-(+)-xylitol solid dispersion maintained potent in vivo anti-breast cancer activity. It effectively suppressed the human triple negative breast cancer development, growth, and recurrence after primary tumor surgical excision in nude mice orthotopic xenograft models. Collectively, these results suggest the OC-(+)-xylitol solid dispersion formulation as a potential nutraceutical for effective control and prevention of human triple negative breast cancer.

Molecular Interactions for the Curcumin-Polymer Complex with Enhanced Anti-Inflammatory Effects

The molecular interactions between compound and polymeric carriers are expected to highly contribute to high drug load and good physical stability of solid dispersions. In this study, a series of amorphous solid dispersions (ASD) of Curcumin (Cur) were prepared with different polymers by the solvent evaporation method. With the carrier polyvinylpyrrolidone (PVP), the amorphous solid dispersion system exhibits a better solubility and stability than that with poloxamers and HP-β-CD due to the strong drug-polymer interaction. The drug/polymer interaction and their binding sites were investigated by combined experimental (XRD, DSC, FTIR, SEM, Raman, and 1H-NMR) and molecular dynamics simulation techniques. The Curcumin ASD demonstrated enhanced bioavailability by 11-fold and improved anti-inflammatory activities by the decrease in cytokine production (MMP-9, IL-1β, IL-6, VEGF, MIP-2, and TNF-α) compared to the raw Curcumin. The integration of experimental and modeling techniques is a powerful tool for the rational design of formulation development.

Design and evaluation of topical solid dispersion composite of voriconazole for the treatment of ocular keratitis

Aim: The objective of present investigation was to increases solubility of voriconazole by using solid dispersion techniques and the development of solid dispersion-based voriconazole ophthalmic solutions. Materials & methods: The saturation solubility of solid dispersion containing polyvinylpyrrolidone K90 (PVPK-90) was found to increase the solubility of voriconazole compare other carrier like polyethylene glycol and Polyvinylpyrrolidone K 30 (PVPK-30). Solid dispersion of voriconazole was characterized by saturation solubility, Fourier-transform infrared spectroscopy and Differential scanning calorimetry study. Results & conclusion: The Fourier-transform infrared spectroscopy and Differential scanning calorimetry studies of voriconazole-based solid dispersion confirmed the complete changes in original polymorphic form of voriconazole. The antifungal assay showed that the maximum zone of inhibition was produced from optimized ophthalmic formulation containing sodium alginate as compared with other formulations and marketed eye drops.

Evaluation of Dissolution Enhancement of Aprepitant Drug in Ternary Pharmaceutical Solid Dispersions with Soluplus® and Poloxamer 188 Prepared by Melt Mixing

In the present study Aprepitant (APT) ternary solid dispersions (SDs) were developed and evaluated for the first time. Specifically, ternary SDs of APT with Poloxamer 188 and Soluplus® (SOL) were prepared via melt mixing and compared to binary APT/Poloxamer 188 and APT/SOL SDs. Initially, combined thermo-gravimetric and hot-stage polarized light microscopy studies indicated that all tested compounds were thermally stable up to 280 °C, while Poloxamer 188 acted as a plasticizer to SOL by significantly reducing the temperature required to fully solubilize the API during SD preparation. Differential scanning calorimetry combined with wide angle X-ray diffraction studies showed that crystalline API was dispersed in both binary and ternary SDs, while Fourier transformation-infrared spectroscopy studies revealed no molecular interactions among the components. Scanning electron microscopy combined with EDAX element analysis showed that the API was dispersed in nano-scale within the polymer matrices, while increasing APT content led to increasing API nano-crystals within the SDs. Finally, dissolution studies showed that the prepared formulations enhanced dissolution of Aprepitant and its mechanism analysis was further studied. A mathematical model was also investigated to evaluate the drug release mechanism.

Analytical and Computational Methods for the Estimation of Drug-Polymer Solubility and Miscibility in Solid Dispersions Development

The development of stable solid dispersion formulations that maintain desired improvement of drug dissolution rate during the entire shelf life requires the analysis of drug-polymer solubility and miscibility. Only if the drug concentration is below the solubility limit in the polymer, the physical stability of solid dispersions is guaranteed without risk for drug (re)crystallization. If the drug concentration is above the solubility, but below the miscibility limit, the system is stabilized through intimate drug-polymer mixing, with additional kinetic stabilization if stored sufficiently below the mixture glass transition temperature. Therefore, it is of particular importance to assess the drug-polymer solubility and miscibility, to select suitable formulation (a type of polymer and drug loading), manufacturing process, and storage conditions, with the aim to ensure physical stability during the product shelf life. Drug-polymer solubility and miscibility can be assessed using analytical methods, which can detect whether the system is single-phase or not. Thermodynamic modeling enables a mechanistic understanding of drug-polymer solubility and miscibility and identification of formulation compositions with the expected formation of the stable single-phase system. Advance molecular modeling and simulation techniques enable getting insight into interactions between the drug and polymer at the molecular level, which determine whether the single-phase system formation will occur or not.

Theoretical Study of the Adsorption Process of Antimalarial Drugs into Acrylamide-Base Hydrogel Model Using DFT Methods: The First Approach to the Rational Design of a Controlled Drug Delivery System

The interaction between three widely used antimalarial drugs chloroquine, primaquine and amodiaquine with acrylamide dimer and trimer as a hydrogel model, were studied by means of density functional theory calculation in both vacuum and water environments, using the functional wb97xd with 6-31++G(d,p) basis set and polarizable continuum model (C-PCM) of solvent. According to binding energy, around −3.15 to −11.91 kJ/mol, the interaction between antimalarial compounds and hydrogel model are exothermic in nature. The extent of interaction found is primaquine > amodiaquine > chloroquine. The natural bond orbital (NBO) calculation and application of second-order perturbation theory show strong charge transfer between the antimalarial and hydrogel model. In addition, the results suggest these interactions are polar in nature, where hydrogen bonds play a principal role in stabilization of the complex. Comparing with the gas-phase, the complexes in the water environment are also stable, with suitable values of Log P (Partition coefficient), and dipolar momentum. Consequently, these results encourage to test acrylamide hydrogels as antimalarial delivery systems.

Aprepitant Drug in Ternary Pharmaceutical Solid Dispersions with Soluplus® and Poloxamer 188 Prepared by Melt Mixing

In the present study Aprepitant (APT) ternary solid dispersions (SDs) were developed and evaluated for the first time. Specifically, ternary SDs of APT with Poloxamer 188 and Soluplus® (SOL) were prepared via melt mixing and compared to binary APT/Poloxamer 188 and APT/SOL SDs. Initially, combined thermo-gravimetric and hot-stage polarized light microscopy studies indicated that all tested compounds were thermally stable up to 280 °C, while Poloxamer 188 acted as a plasticizer to SOL by significantly reducing the temperature required to fully solubilize the API during SD preparation. Differential scanning calorimetry combined with wide angle X-ray diffraction studies showed that crystalline API was dispersed in both binary and ternary SDs, while Fourier transformation-infrared spectroscopy studies revealed no molecular interactions among the components. Scanning electron microscopy combined with EDAX element analysis showed that the API was dispersed in nano-scale within the polymer matrices, while increasing APT content led to increasing API nano-crystals within the SDs. Finally, dissolution studies showed that the prepared formulations enhanced dissolution of Aprepitant and its mechanism analysis was further studied. A mathematical model was also investigated to evaluate the drug release mechanism

Study the influence of formulation process parameters on solubility and dissolution enhancement of efavirenz solid solutions prepared by hot-melt extrusion: a QbD methodology

The current study investigates the dissolution rate performance of amorphous solid solutions of a poorly water-soluble drug, efavirenz (EFV), in amorphous Soluplus® (SOL) and Kollidon® VA 64 (KVA64) polymeric systems. For the purpose of the study, various formulations with varying drug loadings of 30, 50, and 70% w/w were developed via hot-melt extrusion processing and adopting a Box-Behnken design of experiment (DoE) approach. The polymers were selected based on the Hansen solubility parameter calculation and the prediction of the possible drug-polymer miscibility. In DoE experiments, a Box-Behnken factorial design was conducted to evaluate the effect of independent variables such as Soluplus® ratio (A₁), HME screw speed (A₂), and processing temperature (A₃), and Kollidon®VA64 ratio (B₁), screw speed (B₂), and processing temperature (B₃) on responses such as solubility (X₁ and Y₁) and dissolution rate (X₂ and Y₂) for both ASS [EFV:SOL] and BSS [EFV:KVA64] systems. DSC and XRD data confirmed that bulk crystalline EFV transformed to amorphous form during the HME processing. Advanced chemical analyses conducted via 2D COSY NMR, FTIR chemical imaging, AFM analysis, and FTIR showed that EFV was homogenously dispersed in the respective polymer matrices. The maximum solubility and dissolution rate was observed in formulations containing 30% EFV with both SOL and KVA64 alone. This could be attributed to the maximum drug-polymer miscibility in the optimized formulations. The actual and predicted values of both responses were found precise and close to each other.

Drug-carrier binding and enzymatic carrier digestion in amorphous solid dispersions containing proteins as carrier

In order to further explain the ability of gelatin 50PS and bovine serum albumin (BSA) to generate supersaturation of a series of poorly soluble drugs (carbamazepine, cinnarizine, diazepam, itraconazole, nifedipine, indomethacin, darunavir (ethanolate), ritonavir, fenofibrate, griseofulvin, ketoconazole, naproxen, phenylbutazone and phenytoin), drug-polymer binding was investigated using solution NMR and equilibrium dialysis experiments. Binding characteristics of the biopolymers were compared to those of PVP, PVPVA and HPMC. Since both biopolymers are prone to enzymatic digestion, we evaluated the influence of proteolytic enzymes like pepsin and pancreatin on the dissolution properties of poorly soluble compounds when formulated as amorphous solid dispersions with gelatin 50PS and BSA. Evidence is being presented that supports the importance of drug-polymer binding in inducing and stabilizing supersaturation of poorly soluble drugs and enhancing dissolution from ASDs. In fact, BSA displayed drug binding with nearly all tested model drugs while in case of gelatin 50PS binding was observed for 5 out of 12 drugs. Addition of pepsin or pancreatin during dissolution of the biopolymer-containing ASDs leads to a drop in the concentration of the drug pointing to enzymatic digestion of the gelatin and BSA. However, after digestion, these formulations still outperformed their crystalline counterparts.

Investigating molecular interactions of high-loaded glipizide-HPMCAS microparticles by integrated experimental and modeling techniques

Molecular interactions between drug and polymeric carriers are believed to be the key for high drug loading and better physical stability of micro-particles. However, molecular interactions between drug and polymer are still difficult to investigate using only experimental tools. In this study, high-loaded glipizide (GLP)/hydroxypropyl methylcellulose acetate succinate (HPMCAS) (1/1 w/w) micro-particles were prepared using an in situ pH-dependent solubility method. Molecular interactions within the micro-particles were investigated by integrated experimental and modeling techniques. The dissolution rate of GLP/HPMCAS micro-particles was significantly better than those of solid dispersions and physical mixtures. Scanning electron microscopy images showed that the polymer inhibited GLP recrystallization. Experimental (FTIR spectroscopy, differential scanning calorimetry, powder X-ray diffraction and nuclear magnetic resonance spectroscopy) and molecular dynamics simulation revealed that hydrogen-bonding was the key to the properties of the micro-particles. Our research developed high drug-loading GLP/HPMCAS micro-particles and investigated the interactions between drug and polymer at the molecular level. This integrated approach could be practical methodology for future formulation design.

The inhibiting role of hydroxypropylmethylcellulose acetate succinate on piperine crystallization to enhance its dissolution from its amorphous solid dispersion and permeability

The purpose of this study was to demonstrate that inhibiting crystallization by HPMCAS played a key role in enhancing dissolution and absorption of piperine (Pip) from its amorphous solid dispersion (ASD). Nucleation induction time and supersaturation tests were used to evaluate the ability of the polymers to inhibit crystallization of Pip. The prepared solid dispersions were characterized by DSC and FTIR. The dissolution rate of Pip from its ASDs was assayed by a dissolution test. Pip permeability was investigated by single-pass intestinal perfusion studies. The order of the ability of polymers to inhibit Pip crystallization was HF > MF > LF > L100-55. The best inhibition effect of HF can be attributed to its hydrophobicity and steric hindrance. Pip is amorphous in polymer matrices when the ratio of Pip/HPMCAS is lower than 1 : 1 and Pip/L100-55 is lower than 3 : 1. IR spectra show that there are hydrogen bonds between the amide groups of Pip and the carboxyl groups of polymer. The order of the ability of polymers to enhance Pip dissolution is HF > MF > LF > L100-55, which coincided with the ability of polymers to inhibit Pip crystallization. Increased apparent permeability via HF-induced supersaturation and decreased apparent permeability via solubilization with L100-55 are demonstrated. Nucleation induction time and supersaturation tests may be used to screen appropriate polymers for preparing ASDs.

HPMCAS enhances piperine dissolution and permeability in amorphous solid dispersion by inhibiting crystallization.