A comprehensive review of green synthesis of copper oxide nanoparticles and their diverse biomedical applications

Ultrasonication-assisted synthesis of CuO-decorated montmorillonite K30 nanocomposites for photocatalytic removal of emerging contaminants: A response surface methodology approach

Environmental pollution is increasing worldwide due to population and industrialization. Among the various forms of pollution, water pollution poses a significant challenge in contemporary times. In this study, we synthesized CuO-decorated montmorillonite K30 (MK30) nanosheets via a simple ultrasonication technique. The structural, morphological, compositional, and optical properties of the synthesized nanocomposites were evaluated using advanced instrumentation techniques. The morphology of CuO was cubic and cubic CuO evenly designed on the MK30, which was proved by Field Emission Scanning Electron Microscopy (FESEM). The adsorption photocatalytic activity of the synthesized cubic CuO/MK30 composites was examined through the degradation of MB under visible light irradiation. The apparent reaction rate constant of 20% CuO/MK30 was 12.5 folds higher than that of CuO. These conditions included a catalyst dosage ranging from 5 to 15 mg, a pH level ranging from to 3-11, and a pollutant concentration ranging from 5 to 20 mg/L. The optimal conditions for MB dye removal were determined using response surface methodology (RSM). A scavenger study of the composite was conducted and verified that •O2- and •OH radicals play an important role in the degradation process. This investigation addressed the process of adsorption and potential removal pathways, with a particular emphasis on the role of functional groups. The environmentally friendly CuO/MK30 nanocomposites exhibited potential as photocatalysts for efficiently absorbing and degrading MB dye and TC drug pollutants. They represent promising candidates for the treatment of industrial wastewater, aiming to mitigate the environmental threats posed by organic pollutants.

Nanomaterial in controlling biofilms and virulence of microbial pathogens

The escalating threat of antimicrobial resistance (AMR) poses a grave concern to global public health, exacerbated by the alarming shortage of effective antibiotics in the pipeline. Biofilms, intricate populations of bacteria encased in self-produced matrices, pose a significant challenge to treatment, as they enhance resistance to antibiotics and contribute to the persistence of organisms. Amid these challenges, nanotechnology emerges as a promising domain in the fight against biofilms. Nanomaterials, with their unique properties at the nanoscale, offer innovative antibacterial modalities not present in traditional defensive mechanisms. This comprehensive review focuses on the potential of nanotechnology in combating biofilms, focusing on green-synthesized nanoparticles and their associated anti-biofilm potential. The review encompasses various aspects of nanoparticle-mediated biofilm inhibition, including mechanisms of action. The diverse mechanisms of action of green-synthesized nanoparticles offer valuable insights into their potential applications in addressing AMR and improving treatment outcomes, highlighting novel strategies in the ongoing battle against infectious diseases.

In Situ Synthesis of Cu2O Nanoparticles Using Eucalyptus globulus Extract to Remove a Dye via Advanced Oxidation

Water pollution, particularly from organic contaminants like dyes, is a pressing issue, prompting exploration into advanced oxidation processes (AOPs) as potential solutions. This study focuses on synthesizing Cu2O on cellulose-based fabric using Eucalyptus globulus leaf extracts. The resulting catalysts effectively degraded methylene blue through photocatalysis under LED visible light and heterogeneous Fenton-like reactions with H2O2, demonstrating reusability. Mechanistic insights were gained through analyses of the extracts before and after Cu2O synthesis, revealing the role of phenolic compounds and reducing sugars in nanoparticle formation. Cu2O nanoparticles on cellulose-based fabric were characterized in terms of their morphology, structure, and bandgap via SEM-EDS, XRD, Raman, FTIR, UV-Vis DRS, and TGA. The degradation of methylene blue was pH-dependent; photocatalysis was more efficient at neutral pH due to hydroxyl and superoxide radical production, while Fenton-like reactions showed greater efficiency at acidic pH, primarily generating hydroxyl radicals. Cu2O used in Fenton-like reactions exhibited lower reusability compared to photocatalysis, suggesting deterioration. This research not only advances understanding of catalytic processes but also holds promise for sustainable water treatment solutions, contributing to environmental protection and resource conservation.

Study of graphene incorporation into ZnO-PVA nanocomposites modified electrode for sensitive detection of cadmium

The presence of heavy metals often causes significant health risks, particularly cadmium, which is known for its high toxicity. In this study, a glassy carbon electrode was successfully modified by incorporating ZnO-PVA-Graphene nanocomposite, leveraging the excellent electrical properties and electron mobility of the material. Comprehensive material analysis, including XRD, confirmed that ZnO maintained its hexagonal wurtzite crystal structure despite the addition of graphene. Moreover, FESEM analysis showed that increasing graphene concentration led to a reduction in ZnO particle size by 85, 68, and 52 nm, respectively, accompanied by a decrease in band gap energy, as verified by UV-Vis measurements. Photoluminescence tests were also conducted and the result showed a noticeable blue shift in ZnO-PVA-Graphene nanocomposites compared to ZnO-PVA, specifically in the near band-edge (NBE) UV emission within the 374-379 nm wavelength range. Through I-V characterization, the optimal graphene concentration for cadmium detection was identified as 1.5 wt% in ZnO-PVA-Graphene nanocomposites, showing an approximate ohmic response. Meanwhile, square-wave voltammetry analysis of cadmium concentrations ranging from 0 to 80 ppm produced a coefficient of determination of 0.98926 and a Limit of Detection (LOD) of 9.88 ppm. These results showed the significant potential of ZnO-PVA-Graphene nanocomposites as a promising material for further development as an effective electrode modifier, enhancing the sensitivity of detection systems.

Functionalized fennel extract-mediated alumina/cerium oxide nanocomposite potentiometric sensor for the determination of diclofenac sodium medication

The current work suggests a new, ultrasensitive green functionalized sensor for the determination of anti-inflammatory medication diclofenac sodium (DCF). Alumina (Al2O3) and cerium oxide (CeO2) nanoparticles (NPs) have attracted great interest for their use as outstanding and electroactive nanocomposite in potentiometric and sensory research due to their ultrafunctional potential. The formed nanoparticles have been confirmed using various spectroscopic and microscopic techniques. The fennel extract-mediated Al2O3/CeO2 nanocomposite (Al2O3/CeO2 NCS) modified coated wire membrane sensor developed in this study was used to quantify DCF in bulk and commercial products. Diclofenac sodium was coupled with phosphomolybdic acid (PMA) to generate diclofenac phosphomolybdate (DCF-PM) as an active ion-pair in the existence of polyvinyl chloride (PVC) and o-nitrophenyl octyl ether (o-NPOE). Clear peaks at 270, and 303 nm with band gaps of 4.59 eV and 4.09 eV were measured using UV-vis spectroscopy of Al2O3 and CeO2, respectively. The crystallite sizes of the formed nanoparticles were XRD-determined to be 30.13 ± 8, 17.72 ± 3, and 35.8 ± 0.5 nm for Al2O3, CeO2, and Al2O3/CeO2 NCS, respectively. The developed sensor showed excellent response for the measurement and assay of DCF, with a linearity between 1.0 × 10-9 and 1.0 × 10-2 mol L-1. EmV = (57.76) log [DCF] +622.69 was derived. On the other hand, the typical type DCF-PM presented a potentiometric response range of 1.0 × 10-5-1.0 × 10-2 mol L-1 and a regression equation of EmV = (56.97) log [DCF]+367.16. The functionalized sensor that was proposed was successful in determining DCF in its commercial tablets with percent recovery 99.95 ± 0.3. Method validation has been used to improve the suitability of the suggested potentiometric technique, by studying various parameters with respect to the international council harmonization requirements for analytical methodologies.

Phytofabrication of biocompatible chitosan-based ZnO nanocomposite aided by Cissus quadrangularis extract enriched with antimicrobial and antioxidant potential

A dynamic chitosan-based ZnO nanocomposite (NC) was fabricated via a cost-effective formulation and an eco-friendly procedure utilizing Cissus quadrangularis (CQ) plant extract. This study investigates the antimicrobial and antioxidant properties, together with the cytocompatibility aspects of chitosan-incorporated ZnO nanocomposite (CS-ZnO/CQE). The formation and structural morphology of the nanocomposites were examined using FTIR, UV-Vis, XRD, XPS, BET, TGA, SEM, and TEM techniques. The antibacterial test results demonstrated the greatest inhibitory zone diameter against S. aureus (19 ± 1.00 mm) and E. coli (17 ± 1.05 mm), assessed through agar well diffusion method. Also, the composite exhibited a DPPH inhibition rate of 78.7 ± 0.34 %, indicating its high effectiveness in neutralizing free radicals. In addition, the nanocomposite exhibited less toxicity towards human erythrocytes, HDF and HEK-293 cells as a result of the biocompatibility exhibited by CS, ZnO, and CQ plant extract. Likewise, it has exceptional cell migratory capacity and possesses biodegradability factors. These observations strongly suggest the potential of CS-ZnO/CQE as a cutting-edge antibacterial and antioxidant agent to be implemented in the medical sector.

Balancing Risks versus Benefits: Vitamin C Therapy versus Copper Oxide Nanoparticles Toxicity in Albino Rats' Submandibular Salivary Gland

OBJECTIVES

 This study aimed to examine the suppressive effect of the natural antioxidant vitamin C (VC) against submandibular gland toxicity induced by copper oxide nanoparticles (CuO-NPs).

MATERIALS AND METHODS

 Three groups of 30 mature male albino rats (4 weeks old) weighing between 150 and 200 g were selected. The rats were randomly assigned for 6 weeks to receive: intraperitoneal injection (IP) of vehicle (control group); IP of 2.5 mg/kg body weight (bw) of CuO-NPs (CuO-NPs group); and IP of 2.5 mg/kg bw of CuO-NPs, combined with a daily oral dose of 100 mg/kg bw of VC in drinking water via gavage (CuO-NPs/VC group). The rats were euthanized, and their submandibular glands were dissected for histological evaluation, including hematoxylin and eosin staining and immunohistochemistry for Ki-67 and caspase-3.

STATISTICAL ANALYSIS

 The area expression for Ki-67 and caspase-3 was statistically analyzed using GraphPad Prism. Following analysis of variance analysis, Tukey's post hoc was used for multiple comparisons. The significance level was set at p < 0.05.

RESULTS

 CuO-NPs caused significant cytotoxic effects on submandibular salivary gland cells in albino rats. This led to an increase in Ki-67 and caspase-3 levels compared with the control group. VC administration improved tissue histology and reduced Ki-67 and caspase-3 levels in the VC/CuO-NPs group compared with rats treated with CuO-NPs alone.

CONCLUSION

 The study revealed significant cytotoxic effects of CuO-NPs on the submandibular salivary gland of albino rats. VC effectively mitigated these toxic effects, suggesting its potential as a readily available antioxidant.

A novel functionalized CuTi hybrid nanocomposites: facile one-pot mycosynthesis, characterization, antimicrobial, antibiofilm, antifouling and wastewater disinfection performance

BACKGROUND

The continuous progress in nanotechnology is rapid and extensive with overwhelming futuristic aspects. Through modernizing inventive synthesis protocols, a paradigm leapfrogging in novelties and findings are channeled toward fostering human health and sustaining the surrounding environment. Owing to the overpricing and jeopardy of physicochemical synthesizing approaches, the quest for ecologically adequate schemes is incontestable. By developing environmentally friendly strategies, mycosynthesis of nanocomposites has been alluring.

RESULTS

Herein, a novel architecture of binary CuO and TiO2 in nanocomposites form was fabricated using bionanofactory Candida sp., for the first time. For accentuating the structural properties of CuTi nanocomposites (CuTiNCs), various characterization techniques were employed. UV-Vis spectroscopy detected SPR at 350 nm, and XRD ascertained the crystalline nature of a hybrid system. However, absorption peaks at 8, 4.5, and 0.5 keV confirmed the presence of Cu, Ti and oxygen, respectively, in an undefined assemblage of polygonal-spheres of 15-75 nm aggregated in the fungal matrix of biomolecules as revealed by EDX, SEM and TEM. However, FTIR, ζ-potential and TGA reflected long-term stability (- 27.7 mV) of self-functionalized CuTiNCs. Interestingly, a considerable and significant biocide performance was detected at 50 µg/mL of CuTiNCs against some human and plant pathogens, compared to monometallic counterparts. Further, CuTiNCs (200 µg/mL) ceased significantly the development of Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans biofilms by 80.3 ± 1.4, 68.7 ± 3.0 and 55.7 ± 3.0%, respectively. Whereas, 64.63 ± 3.5 and 89.82 ± 4.3% antimicrofouling potentiality was recorded for 100 and 200 µg/ml of CuTiNCs, respectively; highlighting their destructive effect against marine microfoulers cells and decaying of their extracellular polymeric skeleton as visualized by SEM. Moreover, CuTiNCs (100 and 200 µg/ml) exerted significantly outstanding disinfection potency within 2 h by reducing the microbial load (i.e., total plate count, mold & yeast, total coliforms and faecal Streptococcus) in domestic and agricultural effluents reached >50%.

CONCLUSION

The synergistic efficiency provided by CuNPs and TiNPs in mycofunctionalized CuTiNCs boosted its recruitment as antiphytopathogenic, antibiofilm, antimicrofouling and disinfectant agent in various realms.

Copper nanoparticles biosynthesis by Stevia rebaudiana extract: biocompatibility and antimicrobial application

The growth of material science and technology places a high importance on the creation of better processes for the synthesis of copper nanoparticles. So that, an easy, ecological, and benign process for producing copper nanoparticles (CuNPs) has been developed using candy leaf (Stevia rebaudiana) leaves aqueous extract for the first time. UV-visible spectroscopy, dynamic light scattering (DLS), X-ray diffraction (XRD), high-resolution transmission electron microscope (HR-TEM), Fourier transmission infrared (FTIR), and zeta potential were applied to demonstrate strong characterization for the biosynthesized stevia-CuNPs. The UV-visible absorbance at 575 nm of surface plasmon resonance (SPR) was 1.2. The particle size mean diameter was recorded as 362.3 nm with - 10.8 mV zeta potential. The HR-TEM scanning revealed 51.46-53.17 nm and spherical-shaped stevia-CuNPs surrounded by coat-shell proteins. The cytotoxicity and cytocompatibility activity assay revealed that stevia-CuNPs was safe in lower concentrations and had a significant cell viability reduction in higher concentrations. The produced stevia-CuNPs were applied as antimicrobial agents against eight pathogenic bacteria and five fungi strains. The inhibitory action of the stevia-CuNPs was more pronounced in bacteria than in fungi, and they likewise demonstrated further inhibition zones in Staphylococcus aureus (50.0 mm) than in Aspergillus flavus (55.0 mm). With inhibition zone sizes of 50.0 mm and 47.0 mm and 50 µg/ml minimum inhibitory concentration, S. aureus and A. flavus were the most inhibited pathogens. The minimum lethal effect (MLC) estimate for S. aureus was 50 µg/ml, whereas 75 µg/ml for A. flavus. The stevia-CuNPs mode of action was characterized as bactericidal/fungicidal as the ratio of MIC to MLC was estimated to be equal to or less than 2. After all, stevia-CuNPs could be used as an alternative to commercial antibiotics to solve the problem of multidrug-resistant (MDR) microorganisms.

Tragacanth gum-based copper oxide nanoparticles: Comprehensive characterization, antibiofilm, antimicrobial and photocatalytic potentials

Hereunder, we pioneered the synthesis of Copper Oxide nanoparticles (CuO NPs) utilizing Tragacanth gum (TG). The NPs were characterized using advanced techniques and assessed for different pharmaceutical and environmental perspectives. The successful formation of a colloidal NPs solution was confirmed by the appearance of a distinct black color and a distinct peak at 260 nm in UV-Visible spectrophotometry. The FTIR analysis unveiled a spectrum of functional groups responsible for the reduction and stabilization of CuO NPs. Dynamic Light Scattering (DLS) and Transmission Electron Microscopy (TEM) revealed size of NPs as 36.24 nm and 28 ± 04 nm respectively. Energy Dispersive X-ray (EDX) Analysis indicated weight percentages of 70.38 % for Cu and 18.88 % for O, with corresponding atomic percentages. The X-ray Diffraction (XRD) analysis revealed the orthorhombic crystal structure of the prepared CuO NPs. Antimicrobial assessments through disc-diffusion assays demonstrated significant zones of inhibition (ZOI) against gram-positive bacterial strains (Bacillus Halodurans and Micrococcus leutus) and a gram-negative bacterial strain (E. coli). Against the fungal strain Aspergillus niger, a ZOI of 18.5 ± 0.31 mm was observed. The NPs exhibited remarkable antioxidant potential determined through 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and H2O2 scavenging assays. At a concentration of 3 mg/mL, the NPs demonstrated biofilm inhibition rates of 96 %, 90 %, 89.60 %, and 72.10 % against Micrococcus luteus, Bacillus halodurans, MRSA and E.coli respectively. Furthermore, the CuO NPs showed a high photocatalytic potential towards the degradation of safranin dye under sunlight irradiation. In conclusion, the findings underline the promising multifunctional properties of TG-based CuO NPs for different practical applications.

Green synthesis of chitosan-encapsulated CuO nanocomposites for efficient degradation of cephalosporin antibiotics in contaminated water

The synthesis and characterization of chitosan encapsulated copper oxide nanocomposites (CuNPs) using plant extracts for the photocatalytic degradation of second-generation antibiotics, cefixime and cefuroxime, were investigated. The study revealed that the presence of diverse chemical components in the plant extract significantly influenced the size of the CuNPs, with transmission electron microscopy (TEM) showing spherical shapes and sizes ranging from 11-35 nm. The encapsulation process was confirmed by an increase in size for certain samples, indicating successful encapsulation. X-ray photoelectron spectroscopy (XPS) analysis further elucidated the chemical makeup, confirming the valency state of Cu2+ and the presence of Cu-O bonding, with no contaminants detected. Photocatalytic activity assessments demonstrated that the copper oxide nanocomposites exhibited significant degradation capabilities against both antibiotics under UV light irradiation, with encapsulated nanocomposites (EnCu30) showing up to 96.18% degradation of cefuroxime within 60 min. The study highlighted the influence of chitosan encapsulation on enhancing photocatalytic performance, attributed to its high adsorption capability. Recycling studies confirmed the sustainability of the Cu nanocomposites, maintaining over 89% degradation rate after five consecutive cycles. This research underscores the potential of green-synthesized CuNPs as efficient, stable photocatalysts for the degradation of harmful antibiotics, contributing to environmental sustainability and public health protection.

Electrospun nanofibers synthesized from polymers incorporated with bioactive compounds for wound healing

The development of innovative wound dressing materials is crucial for effective wound care. It's an active area of research driven by a better understanding of chronic wound pathogenesis. Addressing wound care properly is a clinical challenge, but there is a growing demand for advancements in this field. The synergy of medicinal plants and nanotechnology offers a promising approach to expedite the healing process for both acute and chronic wounds by facilitating the appropriate progression through various healing phases. Metal nanoparticles play an increasingly pivotal role in promoting efficient wound healing and preventing secondary bacterial infections. Their small size and high surface area facilitate enhanced biological interaction and penetration at the wound site. Specifically designed for topical drug delivery, these nanoparticles enable the sustained release of therapeutic molecules, such as growth factors and antibiotics. This targeted approach ensures optimal cell-to-cell interactions, proliferation, and vascularization, fostering effective and controlled wound healing. Nanoscale scaffolds have significant attention due to their attractive properties, including delivery capacity, high porosity and high surface area. They mimic the Extracellular matrix (ECM) and hence biocompatible. In response to the alarming rise of antibiotic-resistant, biohybrid nanofibrous wound dressings are gradually replacing conventional antibiotic delivery systems. This emerging class of wound dressings comprises biopolymeric nanofibers with inherent antibacterial properties, nature-derived compounds, and biofunctional agents. Nanotechnology, diminutive nanomaterials, nanoscaffolds, nanofibers, and biomaterials are harnessed for targeted drug delivery aimed at wound healing. This review article discusses the effects of nanofibrous scaffolds loaded with nanoparticles on wound healing, including biological (in vivo and in vitro) and mechanical outcomes.

An Investigation into the Larvicidal Activity of Biologically Synthesized Silver and Copper Oxide Nanoparticles Against Mosquito Larvae

This study is primarily focused on the synthesis of silver and copper oxide nanoparticles utilizing the extract of Ipomoea staphylina plant and their larvicidal activity against specific larvae. Notably, Anopheles stephensi and Aedes aegypti are significant disease vectors responsible for transmitting diseases such as malaria, dengue fever, Zika virus, and chikungunya (Anopheles stephensi), and dengue and Zika (Aedes aegypti). These mosquitoes have a substantial impact on urban areas, influencing disease transmission dynamics. In an effort to control these larvae, we have pursued the synthesis of a herbal-based nanomedicine derived from I. staphylina, a valuable herb in traditional medicine. Our successful synthesis of silver and CuO nanoparticles followed environmentally sustainable green chemistry methodologies. The I. staphylina plant extract played a dual role as a reducing agent and dopant, aligning with principles of sustainability. We employed X-ray diffraction (XRD) analysis to validate the nanoparticle structure and size, while field-emission scanning electron microscopy (FE-SEM) revealed well-defined nanostructures. Elemental composition was determined through energy-dispersive X-ray (EDX) analysis, and UV-visible spectroscopy provided insights into the bandgap energy (3.15 eV for silver, 1.2 eV for CuO nanoparticles). These nanoparticles exhibited robust larvicidal activity, with CuO nanoparticles surpassing silver nanoparticles in terms of LC50 and LC90 values. Moreover, the developmental toxicity of CuO and Ag NPs was evaluated in zebrafish embryos as part of non-target eco-toxicological studies conducted in a standard laboratory environment. These findings underscore the potential utility of these nanoparticles as highly effective and environmentally friendly natural pesticides, offering cost-effectiveness and ecological benefits.

Platelet-derived drug delivery systems: Pioneering treatment for cancer, cardiovascular diseases, infectious diseases, and beyond

Platelets play a critical role as circulating cells in the human body and contribute to essential physiological processes such as blood clotting, hemostasis, vascular repair, and thrombus formation. Currently, platelets are extensively employed in the development of innovative biomimetic drug delivery systems, offering significant enhancements in circulation time, biocompatibility, and targeted delivery efficiency compared to conventional drug delivery approaches. Leveraging the unique physiological functions of platelets, these platelet-derived drug delivery systems (DDSs) hold great promise for the treatment of diverse diseases, including cancer, cardiovascular diseases, infectious diseases, wound healing and other diseases. This review primarily focuses on the design and characteristics of existing platelet-derived DDSs, including their preparation and characterization methods. Furthermore, this review comprehensively outlines the applications of these materials across various diseases, offering a holistic understanding of their therapeutic potential. This study aimed to provide a comprehensive overview of the potential value of these materials in clinical treatment, serving as a valuable reference for the advancement of novel platelet-derived DDSs and their broader utilization in the field of disease treatment.

Chitosan nanofibers encapsulating copper oxide nanoparticles: A new approach towards multifunctional ecological membranes with high antimicrobial and antioxidant efficiency

This paper focuses on the preparation of chitosan-based nanofibers embedding copper oxide nanoparticles to create multifunctional materials that meet the demands of contemporary applications. To this end, a mixture of chitosan, quaternized chitosan and poly (ethylene glycol) was used as polymeric matrix, considering their own contribution to the final material's properties and their ability to stabilize the copper oxide nanoparticles. An exhaustive investigation of the nanofibers was done in order to assess their composition and morphology (FTIR, 1H NMR, WXRD, TGA, SEM, TEM, POM, UV-vis) and to study their mechanical, antimicrobial and antioxidant properties, air and water permeability and ability for air filtration. It was shown that the copper oxide nanoparticles were anchored into the polymeric matrix via strong hydrogen bonding and electrostatic interactions, which induced the improvement of the mechanical properties and antioxidant activity. The copper oxide nanoparticles favored the thinning of the fibers during electrospinning process and improved the antibacterial activity and dust filtration capacity. Besides, the fibers displayed air permeability and vapor water transmission rate similar to synthetic nanofibers, while being biodegradable. All these performances recommend the new materials for developing antibacterial eco-materials with good breathability to be used as hygienic textiles, masks, or air filters.

Emerging trends in wastewater treatment: Addressing microorganic pollutants and environmental impacts

This review focuses on the challenges and advances associated with the treatment and management of microorganic pollutants, encompassing pesticides, industrial chemicals, and persistent organic pollutants (POPs) in the environment. The translocation of these contaminants across multiple media, particularly through atmospheric transport, emphasizes their pervasive nature and the subsequent ecological risks. The urgency to develop cost-effective remediation strategies for emerging organic contaminants is paramount. As such, wastewater-based epidemiology and the increasing concern over estrogenicity are explored. By incorporating conventional and innovative wastewater treatment techniques, this article highlights the integration of environmental management strategies, analytical methodologies, and the importance of renewable energy in waste treatment. The primary objective is to provide a comprehensive perspective on the current scenario, imminent threats, and future directions in mitigating the effects of these pollutants on the environment. Furthermore, the review underscores the need for international collaboration in developing standardized guidelines and policies for monitoring and controlling these microorganic pollutants. It advocates for increased investment in research and development of advanced materials and technologies that can efficiently remove or neutralize these contaminants, thereby safeguarding environmental health and promoting sustainable practice.

Plant mediated synthesis of flower-like Cu2O microbeads from Artimisia campestris L. extract for the catalyzed synthesis of 1,4-disubstituted 1,2,3-triazole derivatives

This study presents a novel method for synthesizing 1,4-disubstituted 1,2,3-triazole derivatives through a one-pot, multi-component addition reaction using flower-like Cu2O microbeads as a catalyst. The flower-like Cu2O microbeads were synthesized using an aqueous extract of Artimisia Campestris L. This extract demonstrated the capability to reduce and stabilize Cu2O particles during their initial formation, resulting in the formation of a porous flower-like morphology. These Cu2O microbeads exhibit distinctive features, including a cubic close-packed (ccp) crystal structure with an average crystallite size of 22.8 nm, bandgap energy of 2.7 eV and a particle size of 6 µm. Their catalytic activity in synthesizing 1,4-disubstituted 1,2,3-triazole derivatives was investigated through systematic exploration of key parameters such as catalyst quantity (1, 5, 10, 15, 20, and 30 mg/mL), solvent type (dimethylformamide/H2O, ethanol/H2O, dichloromethane/H2O, chloroform, acetone, and dimethyl sulfoxide), and catalyst reusability (four cycles). The Cu2O microbeads significantly increased the product yield from 20% to 85.3%. The green synthesis and outstanding catalytic attributes make these flower-like Cu2O microbeads promising, efficient, and recyclable catalysts for sustainable and effective chemical transformations.

Development and characterization of biogenic copper oxide nanoparticles, with an exploration of their antibacterial and antioxidant potential

This study outlines the synthesis of biogenic copper oxide nanoparticles (CuONPs) using an extract derived from Cassia fistula Linn (Cf) leaves through a green synthesis approach. Characterization of the synthesized CfBio-CuONPs was carried out using UV- VIS, FTIR, DLS, XRD, and TEM studies. The CfBio-CuONPs exhibited a prominent peak at 272 nm in UV-VIS spectroscopy, and XRD measurements confirmed their crystalline nature. The FTIR spectrum of CfBio-CuONPs revealed the presence of functional groups such as O-H and aromatic groups. TEM analysis confirmed that the CfBio-CuONPs were predominantly spherical with diameters ranging from 15 to 25 nm. Subsequently, the antibacterial potential of CfBio-CuONPs was evaluated against four pathogenic bacteria, including Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis, and Bacillus subtilis. Among these, B. subtilis exhibited the highest zone of inhibition (26.93 ± 2.01 mm), followed by E. coli (24.25 ± 1.04 mm), P. aeruginosa (23.98 ± 0.97 mm), and S. epidermidis (22.97 ± 1.20 mm). CfBio-CuONPs demonstrated maximum antioxidant activity (78 ± 1.54%) at a dose-dependent concentration of 2000 µg/ml. Furthermore, in vitro toxicity assessment using the toxtrak test indicated that CfBio-CuONPs exhibited a significantly stronger toxic effect value/PI against E. coli (93.52%) compared to P. aeruginosa (92.65%), B. subtilis (91.25%), and S. epidermidis (82.89%). These results underscore the notable toxicity of CfBio-CuONPs against E. coli, surpassing that against other bacteria and conventional antibiotics. This study highlights the potential utility of CfBio-CuONPs for eradicating pathogenic microorganisms and suggests potential implications for ecotoxicology.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03869-5.

Photocatalytic degradation of fluoroquinolone antibiotics using chitosan biopolymer functionalized copper oxide nanoparticles prepared by facile sonochemical method

Photocatalytic degradation is an excellent method for removing pharmaceutical residues due to their simplicity, ecological benignity, high efficiency, and exceptional stability. Herein, we demonstrate the sonochemically synthesised chitosan biopolymer functionalized copper oxide nanoparticles as an efficient photocatalyst for the degradation of fluoroquinolone-based antibiotics. The X-ray diffraction Rietveld refinement revealed the formation of single-phase copper oxide (CuO) with a monoclinic structure. The presence of biopolymer functionalization was corroborated by Fourier Transform Infrared spectroscopy by observing the -NH2 and -OH functional groups. The high-resolution transmission electron microscopic images inferred that Chitosan functionalized copper oxide (C-CuO) particles are nano-sized with a smooth texture and aggregation-free particles. The strong absorbance and the broad photoluminescence emission in the ultraviolet-visible region confirm the suitability of CuO and C-CuO nanoparticles for photocatalytic applications. The catalytic activity was studied against fluoroquinolone-based antibiotics such as ciprofloxacin and norfloxacin under direct sunlight illumination. Interestingly, the C-CuO catalyst demonstrated 71.07 % (@140 min.) and 71.9 % (@60 min.) of degradation for ciprofloxacin and norfloxacin, respectively. The obtained photocatalytic activity of the prepared CuO and C-CuO catalysts was superior to the CuO particles prepared by the coprecipitation method (CC-CuO).

Electro-sensing layer constructed of a WO3/CuO nanocomposite, for the electrochemical determination of 2-phenylphenol fungicide

The abstract highlights the development of an electroanalytical sensor for the detection of 2-phenylphenol (2-PPL) as a contaminant. The novelty of the experiment lies in the utilization of a 1-D nanostructured WO3/CuO nanocomposite integrated with a carbon paste electrode (CPE). The hydrothermal method was used to synthesize the WO3 NPs, which were then characterized using Scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS) techniques. Tungsten oxides (WO3) have been the subject of extensive study because of their many desirable characteristics, including their ease of preparation, tunable stoichiometry, crystal structure, particle morphology, 2.6 eV bandgap, excellent photocatalytic oxidation capacity, non-toxic nature, and widespread availability. The narrow band gap in CuO makes it an ideal sensing material. Copper oxide has applications in many different industries because it is a semiconductor metal with a narrow band gap in the spectrum of 1.2-1.9 eV and unique optical, electrical, and magnetic properties. Techniques like cyclic voltammetry (CV), and square wave voltammetry (SWV) were used. Real sample analysis was carried out in real-world samples like different types of soil, vegetables, and water. The electroanalytical sensor showed outstanding catalytic behavior by enhancing the peak current of the 2-phenylphenol with the potential shift to the less positive side compared to the unmodified carbon paste electrode in the presence of pH 7.0 phosphate buffer solution (PB). Throughout the experimental study, double distilled was used. Various electro-kinetic parameters like pH, accumulation time study, scan rate, concentration variation, standard heterogeneous rate constant, and participation of electrons, accumulation time, and transfer coefficient have been studied at WO3/CuO/CPE. The limit of detection was quantified together with the limit of quantification. Possible electrochemical oxidation mechanism of the toxic molecule was depicted. Overall, this research contributes to the field of electroanalytical sensing and offers potential applications in environmental monitoring.

Mechanistic study of copper oxide, zinc oxide, cadmium oxide, and silver nanoparticles-mediated toxicity on the probiotic Lactobacillus reuteri

The use of metal/metal oxide nanoparticles (NPs) in consumer products has increased dramatically. Accordingly, human exposure to these NPs has increased. Lactobacillus reuteri, a member of the beneficial gut microbiota, is essential for human health. In the present study, the toxic effect of three metal oxides (CuO, ZnO, and CdO) and one metal (Ag) NPs on L. reuteri were investigated in vitro. L. reuteri was susceptible to all the prepared NPs in a dose-dependent manner, visualized as an increase in the zones of inhibition and a significant reduction in the maximum specific growth rates (µmax). The minimal inhibitory concentrations were 5.8, 26, 560, and 560 µg/mL for CdO-, Ag-, ZnO-, and CuO-NPs, respectively, and the respective minimal bactericidal concentrations were 60, 70, 1500, and 1500 µg/mL. Electron microscopic examinations revealed the adsorption of the prepared NPs on L. reuteri cell surface, causing cell wall disruption and morphological changes. These changes were accompanied by significant leakage of cellular protein content by 214%, 191%, 112%, and 101% versus the untreated control when L. reuteri was treated with CdO-, Ag-, CuO-, and ZnO-NPs, respectively. NPs also induced oxidative damage, where the malondialdehyde level was significantly increased, and glutathione content was significantly decreased. Quantifying the DNA damage using comet assay showed that CuONPs had the maximum DNA tail length (8.2 px vs. 2.1 px for the control). While CdONPs showed the maximum percentage of DNA in tail (15.5% vs. 3.1%). This study provides a mechanistic evaluation of the NPs-mediated toxicity to a beneficial microorganism.

Green Synthesis of Metal and Metal Oxide Nanoparticles: A Review of the Principles and Biomedical Applications

In recent years, interest in nanotechnology has increased exponentially due to enhanced progress and technological innovation. In tissue engineering, the development of metallic nanoparticles has been amplified, especially due to their antibacterial properties. Another important characteristic of metal NPs is that they enable high control over the features of the developed scaffolds (optimizing their mechanical strength and offering the controlled release of bioactive agents). Currently, the main concern related to the method of synthesis of metal oxide NPs is the environmental impact. The physical and chemical synthesis uses toxic agents that could generate hazards or exert carcinogenicity/environmental toxicity. Therefore, a greener, cleaner, and more reliable approach is needed. Green synthetic has come as a solution to counter the aforementioned limitations. Nowadays, green synthesis is preferred because it leads to the prevention/minimization of waste, the reduction of derivatives/pollution, and the use of non-toxic (safer) solvents. This method not only uses biomass sources as reducing agents for metal salts. The biomolecules also cover the synthesized NPs or act as in situ capping and reducing agents. Further, their involvement in the formation process reduces toxicity, prevents nanoparticle agglomeration, and improves the antimicrobial activity of the nanomaterial, leading to a possible synergistic effect. This study aims to provide a comprehensive review of the green synthesis of metal and metal oxide nanoparticles, from the synthesis routes, selected solvents, and parameters to their latest application in the biomedical field.

Copper oxide nanoparticles exhibit variable response against enzymatic toxicity biomarkers of Moina macrocopa

Growing toxicity of nanomaterials to aquatic organisms is a major area of concern as it is destroying the carefully evolved aquatic ecosystem and food web. Copper oxide nanoparticles (CuONPs) are among the top industrially manufactured nanomaterials having multifaceted applications in medicine, agriculture, energy, water technology, and other areas. However, reports on detailed scientific understanding behind toxic effects of CuONPs on aquatic organisms are scant. The present work reports on the interaction of CuONPs of 10 ± 05 nm with an ecologically significant aquatic species, Moina macrocopa, at morphological and enzymatic levels. CuONPs were found to be severely toxic just within 48 h of exposure as seen from the lethal value (48 h LC50) of 0.137 ± 0.002 ppm. Profiling of enzymatic toxicity biomarkers indicated variable response of CuONPs on selected enzymes of M. macrocopa at two sub-lethal concentrations (0.013 to 0.039 ppm). While the activities of acetyl cholinesterase and digestive enzymes (trypsin, amylase) were found to be significantly (p < 0.001) lowered after exposure to CuONPs, the β-galactosidase activity was completely inhibited. Among the antioxidant enzymes that were assayed, superoxide dismutase and glutathione-S-transferase activity was found to increase (p > 0.001), while that of catalase decreased (p > 0.001, < 0.05) with increase in exposure to CuONPs. An upsurge of several folds was seen in the activity of alkaline phosphatase after exposure to CuONPs as compared to the control group. CuONPs accumulated in the gut region of M. macrocopa which provided an ideal environment for CuONP to interact and alter the enzymes in M. macrocopa. This report highlights the use of enzymes as sensitive biomarker to detect toxicity of trace amount of CuONPs in a very sensitive non-target crustacean species found in water bodies.

Biofabrication of Acer palmatum-Mediated Multifunctional CuO Nanoparticles for Dye Removal, Antibacterial-Antifungal Activity, and Molecular Docking

Copper oxide nanoparticles (CuONPs) are used in many fields from electronics to medicine due to their multifunctionality, and therefore, their production with environmentally friendly methods is a current issue. In this study, biofabricated CuONPs were obtained by using the leaf extract of Acer palmatum plant originating from the Far East to enlighten the characteristics of the novel nanoparticles differentiating from those existing in the literature. Multifunctional nature of the CuONPs was evaluated by the antibacterial, antifungal, and decolorative applications and also by performing molecular docking analysis. The fabricated CuONPs were characterized using ultraviolet-visible spectroscopy (UV-vis), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and dynamic light scattering (DLS). The absorbance seen at 270 nm in the SPR band obtained by UV-vis spectroscopy proved the presence of CuONPs, while the 602, 560, and 540 cm-1 vibrations obtained in the FT-IR spectroscopy indicated the same result. SEM images proved that the nanoparticles were in spherical form with sizes ranging from 140 to 225 nm. The result of DLS analysis showed that the average particle size was 229 nm in diameter, and CuONPs had monodisperse systems (polydispersity index, 0.184). The dye removal potency of CuONPs was also investigated by using remazol brilliant blue R (RBBR) and napthol blue black (NBB). Decolorizations (74 and 86%) of RBBR and NBB were obtained in 90 min at 50 °C, respectively. The strong antibacterial properties of the synthesized CuONPs were observed on both Gram (-) and Gram (+) bacterial strains by disk diffusion and optical analyses, and their antifungal activity was close to that of Amphotericin B, which was applied as a positive control. Molecular docking analysis was performed with Escherichia coli dihydrofolate reductase and Staphylococcus aureus DNA Gyrase B to analyze the antibacterial mechanisms of CuONP and observed that they exhibit good interactions with their targets with binding energies of -12.562 and -8.797 kcal/mol, respectively. Our findings suggested that CuONPs are crucial in the mechanisms of folate metabolism and DNA replication associated with bacterial proliferation. This work will provide significant guidance for the biofabrication of CuONPs and their medical and industrial applications.

Green synthesis of copper oxide nanoparticles from Murraya koenigii and its corrosion resistivity on Ti-6Al-4V dental alloy

The present work describes green-mediated copper oxide nanoparticles as a potential corrosion inhibitor for the dental alloy Ti-6Al-4V. The salt of copper was reduced to metal nanoparticles using Murraya koenigii leaves, which helps with the agglomeration and nanocluster formation through a reduction mechanism. The current synthesis is a single-step process and is cost-effective. The synthesized nanoparticle was characterized using UV, FTIR, XRD, Zeta potential and Particle size analyzer, SEM, and EDX. The particles were then electrodeposited on Ti-6Al-4V alloy, and the corrosion resistivity in the dental medium was analyzed using Electrochemical parameters such as Corrosion current, Corrosion potential, and anodic and cathodic intercepts through the Tafel and Nyquist plots. The synthesized nanoparticles showed characteristic absorbance at 359 nm. FTIR peaks confirm the phytochemical constituents present in the Murraya koenigii that accounts for the formation of nanoparticles. The XRD predicts the crystalline nature, which is further studied using SEM and EDX. The Zeta potential and Particle size analyzer confirms the negative-negative interactive nature of the synthesized CuO NPs. The NPs showed explicit corrosion inhibition properties with an overall inhibition efficiency of 58.15% and 25.6%, respectively. The study confirms the advantage of using Copper Oxide nanoparticles as a potential coating agent in dental implant alloys in increasing its corrosion efficiency.

Hippophae rhamnoides L. (sea buckthorn) mediated green synthesis of copper nanoparticles and their application in anticancer activity

Green synthesis of nanoparticles has drawn huge attention in the last decade due to their eco-friendly, biocompatible nature. Phyto-assisted synthesis of metallic nanoparticles is widespread in the field of nanomedicine, especially for antimicrobial and anticancer activity. Here in the present research work, investigators have used the stem extract of the Himalayan plant Hippophae rhamnoides L, for the synthesis of copper nanoparticles (CuNPs). The synthesized of CuNPs were analyzed by using sophisticated instruments, i.e., Fourier transform infrared spectroscopy (FTIR), UV-Vis spectroscopy, X-ray diffraction (XRD), high-performance liquid chromatography (HPLC), and scanning electron microscope (SEM). The size of the synthesized CuNPs was varying from 38 nm to 94 nm which were mainly spherical in shape. Further, the potential of the synthesized CuNPs was evaluated as an anticancer agent on the Hela cell lines, by performing an MTT assay. In the MTT assay, a concentration-dependent activity of CuNPs demonstrated the lower cell viability at 100 μg/mL and IC50 value at 48 μg/mL of HeLa cancer cell lines. In addition to this, apoptosis activity was evaluated by reactive oxygen species (ROS), DAPI (4',6-diamidino-2-phenylindole) staining, Annexin V, and Propidium iodide (PI) staining, wherein the maximum ROS production was at a dose of 100 µg per mL of CuNPs with a higher intensity of green fluorescence. In both DAPI and PI staining, maximum nuclear condensation was observed with 100 μg/mL of CuNPs against HeLa cell lines.

Bionanomining of copper-based nanoparticles using pre-processed mine tailings as the precursor

The bacterial synthesis of copper nanoparticles emerges as an eco-friendly alternative to conventional techniques since it comprises a single-step and bottom-up approach, which leads to stable metal nanoparticles. In this paper, we studied the biosynthesis of Cu-based nanoparticles by Rhodococcus erythropolis ATCC4277 using a pre-processed mining tailing as a precursor. The influence of pulp density and stirring rate on particle size was evaluated using a factor-at-time experimental design. The experiments were carried out in a stirred tank bioreactor for 24 h at 25 °C, wherein 5% (v/v) of bacterial inoculum was employed. The O₂ flow rate was maintained at 1.0 L min^-1 and the pH at 7.0. Copper nanoparticles (CuNPs), with an average hydrodynamic diameter of 21 ± 1 nm, were synthesized using 25 g.L^-1 of mining tailing and a stirring rate of 250 rpm. Aiming to visualize some possible biomedical applications of the as-synthesized CuNPs, their antibacterial activity was evaluated against Escherichia coli and their cytotoxicity was evaluated against Murine Embryonic Fibroblast (MEF) cells. The 7-day extract of CuNPs at 0.1 mg mL^-1 resulted in 75% of MEF cell viability. In the direct method, the suspension of CuNPs at 0.1 mg mL^-1 resulted in 70% of MEF cell viability. Moreover, the CuNPs at 0.1 mg mL^-1 inhibited 60% of E. coli growth. Furthermore, the NPs were evaluated regarding their photocatalytic activity by monitoring the oxidation of methylene blue (MB) dye. The CuNPs synthesized showed rapid oxidation of MB dye, with the degradation of approximately 65% of dye content in 4 h. These results show that the biosynthesis of CuNPs by R. erythropolis using pre-processed mine tailing can be a suitable method to obtain CuNPs from environmental and economical perspectives, resulting in NPs useful for biomedical and photocatalytic applications.

Eucalyptus globulus Mediated Green Synthesis of Environmentally Benign Metal Based Nanostructures: A Review

The progress in nanotechnology has effectively tackled and overcome numerous global issues, including climate change, environmental contamination, and various lethal diseases. The nanostructures being a vital part of nanotechnology have been synthesized employing different physicochemical methods. However, these methods are expensive, polluting, eco-unfriendly, and produce toxic byproducts. Green chemistry having exceptional attributes, such as cost-effectiveness, non-toxicity, higher stability, environment friendliness, ability to control size and shape, and superior performance, has emerged as a promising alternative to address the drawbacks of conventional approaches. Plant extracts are recognized as the best option for the biosynthesis of nanoparticles due to adherence to the environmentally benign route and sustainability agenda 2030 of the United Nations. In recent decades, phytosynthesized nanoparticles have gained much attention for different scientific applications. Eucalyptus globulus (blue gum) is an evergreen plant belonging to the family Myrtaceae, which is the targeted point of this review article. Herein, we mainly focus on the fabrication of nanoparticles, such as zinc oxide, copper oxide, iron oxide, lanthanum oxide, titanium dioxide, magnesium oxide, lead oxide, nickel oxide, gold, silver, and zirconium oxide, by utilizing Eucalyptus globulus extract and its essential oils. This review article aims to provide an overview of the synthesis, characterization results, and biomedical applications of nanoparticles synthesized using Eucalyptus globulus. The present study will be a better contribution to the readers and the students of environmental research.

Biosynthesis of Copper Oxide and Silver Nanoparticles by Bacillus Spores and Evaluation of the Feasibility of Their Use in Antimicrobial Paints

Modification of paint with nanoparticles (NPs) provides self-cleaning, water/dirt-repellent, and other properties. Therefore, the aim of the present study was to biosynthesize silver (Ag) and copper oxide (CuO) NPs and to prepare NP-modified paint. To this end, AgNPs and CuONPs were biosynthesized using Bacillus atrophaeus spores and commercial and crude dipicolinic acid (DPA) extracted from the spore of this bacterium. The synthesized NPs were characterized using electron microscopy, Fourier-transform infrared (FTIR), X-ray diffraction analysis (XRD), and energy-dispersive X-ray spectroscopy (EDS) methods. A minimum inhibitory concentration (MIC) assay of NPs against Escherichia coli ATCC8739 and Staphylococcus aureus ATCC6538 was carried out. The antibacterial effects of prepared NP-paint complexes were assessed using an optical density (OD) comparison before and after adding metal sheets coated with NP-paint complexes into the nutrient broth medium. Four different types of NPs were synthesized in this research: AgNPs synthesized by spore (A), AgNPs synthesized by commercial DPA (B), AgNPs synthesized by crude DPA (C), and CuONPs synthesized by spore (D). SEM analysis confirmed the spherical shape of NPs. According to the results, NPs A, B, and D showed higher antibacterial activity against S. aureus compared to E. coli. Furthermore, the analysis of the antibacterial effects of NP-paint complexes suggested that paint-NPs A, B, and C displayed higher activity on E. coli compared to S. aureus. Moreover, the antibacterial effect of paint-NP D was significantly lower than other NPs. According to this robust antibacterial effect on pathogenic bacteria, it seems that these NP-paint complexes could be useful in public places such as hospitals, airports, dormitories, schools, and office buildings, where the rate of transmission of infection is high.

Review on Generation and Characterization of Copper Particles and Copper Composites Prepared by Mechanical Milling on a Lab-Scale

This review aims to expose mechanical milling as an alternative method for generating copper-based particles (copper particles (CuP) and copper composites (CuC)); more specifically, via a top-down or bottom-up approach, on a lab-scale. This work will also highlight the different parameters that can affect the size distribution, the type, and the morphology of the obtained CuP or CuC, such as the type of mechanical mill, ball-to-powder ratios (BPR), the milling speed, milling time, and the milling environment, among others. This review analyzes various papers based on the Cu-based particle generation route, which begins with a pretreatment step, then mechanical milling, its approach (top-down or bottom-up), and the post-treatment. Finally, the characterization methods of the resulting CuP and CuC through mechanical milling are also discussed.

Toxicological assessment of Phormidium sp. derived copper oxide nanoparticles for its biomedical and environmental applications

Driven by the need to biosynthesized alternate biomedical agents to prevent and treat infection, copper oxide nanoparticles (CuONPs) have surfaced as a promising avenue. Cyanobacteria-derived synthesis of CuONPs is of substantive interest as it offers an eco-friendly, cost-effective, and biocompatible route. In the present study biosynthesized CuONPs were characterized and investigated regarding their toxicity. Morphological analysis using TEM, SEM and AFM showed the spherical particle size of 20.7 nm with 96% copper that confirmed the purity of CuONPs. Biogenic CuONPs with IC₅₀ value of 64.6 µg ml^-1 showed 90% scavenging of free radicals in superoxide radical scavenging assay. CuONPs showed enhanced anti-inflammatory activity by 86% of protein denaturation with IC₅₀ value of 89.9 µg ml^-1. Biogenic CuONPs exhibited significant toxicity against bacterial strains with lowest MIC value of 62.5 µg ml^-1 for B. cereus and fungal strain with a MIC value of 125 µg ml^-1 for C. albicans. In addition CuONPs demonstrated a high degree of synergistic interaction when combined with standard drugs. CuONPs exhibited significant cytotoxicity against non-small cell lung cancer with an IC₅₀ value of 100.8 µg ml^-1 for A549 and 88.3 µg ml^-1 for the H1299 cell line with apoptotic activities. Furthermore, biogenic CuONPs was evaluated for their photocatalytic degradation potential against methylene blue dye and were able to removed 94% dye in 90 min. Free radical scavenging analysis suggested that CuONPs assisted dye degradation was mainly induced by hydroxide radicals. Biogenic CuONPs appears as an eco-friendly and cost effective photocatalyst for the treatment of wastewater contaminated with synthetic dyes that poses threat to aquatic biota and human health. The present study highlighted the blend of biomedical and photocatalytic potential of Phormidium derived CuONPs as an attractive approach for future applications in nanomedicine and bioremediation.

Biogenic synthesis, molecular docking, biomedical and environmental applications of multifunctional CuO nanoparticles mediated Phragmites australis

The demand for metal nanoparticles is increasing with the widening application areas while causing environmental impact including pollution, toxic byproduct generation and depletion of natural resources. Incorporating natural materials in nanoparticle synthesis can contribute toward environmental sustainability. This paper is concerned with the biogenic synthesis of copper oxide nanoparticles (CuONPs) mediated by the plant species Phragmites australis. UV-vis, FT-IR, TEM and SEM studies were used to characterize the obtained CuONPs. The synthesized nanoparticles' antibacterial efficacy against Escherichia coli and Staphylococcus aureus was assessed. The CuONPs' reducing power, total phenolic component content, and flavonoid content were all calculated. Additionally, the dye removal abilities of copper oxide nanoparticles using Brilliant Blue R-250 were studied. The CuONP synthesis was assessed morphological by change of color and in the UV-vis analysis by the SPR band around 320 and 360 nm. FT-IR was used to monitor the functional groups present in the synthesized CuONPs. The obtained CuONPs were spherical and between 70 and 142 nm in size, according to the SEM data and TEM analyses were in accordance with SEM results. Using disk diffusion, the CuONPs demonstrated substantial antibacterial efficacy against S. aureus and E. coli, with inhibition zones of 18.5 ± 0.8 and 12.7 ± 0.6 mm, respectively. The MBC and MIC values were 62.5 μg/mL against S. aureus and 125 μg/mL against E. coli. The antioxidant abilities of P. australis and CuONPs were also confirmed. The CuONP solution's total phenolic substance content was 9.44 μg of pyrocathecol equivalent per milligram of nanoparticle, and its total flavonoid content was 16.24 μg of catechin equivalent per milligram of nanoparticle. Additionally, the synthesized CuONPs were found to be well effective on industrial dye removal by demonstrating high decolorization of 98 %. Also, the antibacterial activity of CuONPs was investigated through the interactions with S. aureus FtsZ, dihydropteroate synthase and thymidylate kinase. In silico molecular docking analysis was applied in the confirmation of the binding sites and interactions of active sites. CuONP showed -9.067, -8,048, and -7.349 kcal/mol of binding energies in molecular docking analysis of FtsZ, dihydropteroate synthase and thymidylate kinase proteins respectively. The results of this study suggested the antimicrobial, antioxidant and decolorative effect of synthesized CuONPs that can be apply in multiple areas of R&D and industry.

Improved anti-diabetic and anticancer activities of green synthesized CuO nanoparticles derived from Tabernaemontana divaricate leaf extract

Copper oxide nanoparticles (CuO NPs) are among the most commonly employed nanoparticle materials owing to their antibacterial qualities, although their primary mechanism of action (MOA) is still not completely understood. CuO NPs are synthesized in this study using leaf extract of Tabernaemontana divaricate (TDCO3), and they are then analyzed using XRD, FT-IR, SEM, and EDX analysis. The zone of inhibition of TDCO3 NPs against both gram-positive (G⁺) B. subtilis and gram-negative (G^-) K. pneumoniae bacteria was 34 mm and 33 mm, respectively. Furthermore, Cu²⁺/Cu⁺ ions promote reactive oxygen species and electrostatically bind with the negatively charged teichoic acid in the bacterial cell wall. The anti-inflammatory and anti-diabetics analysis was conducted using standard BSA denaturation and α-amylase inhibition technique with cell inhibition values of 85.66 and 81.18% for TDCO3 NPs. Additionally, the TDCO3 NPs delivered prominent anticancer activity with the lowest IC₅₀ value 18.2 μg/mL in the MTT assay technique against HeLa cancer cells.

Green Synthesis and Photocatalytic Dye Degradation Activity of CuO Nanoparticles

The degradation of dyes is a difficult task due to their persistent and stable nature; therefore, developing materials with desirable properties to degrade dyes is an important area of research. In the present study, we propose a simple, one-pot mechanochemical approach to synthesize CuO nanoparticles (NPs) using the leaf extract of Seriphidium oliverianum, as a reducing and stabilizing agent. The CuO NPs were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) and Fourier-transform infrared spectroscopy (FTIR). The photocatalytic activity of CuO NPs was monitored using ultraviolet-visible (UV-Vis) spectroscopy. The CuO NPs exhibited high potential for the degradation of water-soluble industrial dyes. The degradation rates for methyl green (MG) and methyl orange (MO) were 65.231% ± 0.242 and 65.078% ± 0.392, respectively. Bio-mechanochemically synthesized CuO NPs proved to be good candidates for efficiently removing dyes from water.

Photocatalytic Organic Contaminant Degradation of Green Synthesized ZrO2 NPs and Their Antibacterial Activities

The green synthesis of metal oxide nanoparticles is an efficient, simple, and chemical-free method of producing nanoparticles. The present work reports the synthesis of Murraya koenigii-mediated ZrO2 nanoparticles (ZrO2 NPs) and their applications as a photocatalyst and antibacterial agent. Capping and stabilization of metal oxide nanoparticles were achieved by using Murraya koenigii leaf extract. The optical, structural, and morphological valance of the ZrO2 NPs were characterized using UV-DRS, FTIR, XRD, and FESEM with EDX, TEM, and XPS. An XRD analysis determined that ZrO2 NPs have a monoclinic structure and a crystallite size of 24 nm. TEM and FESEM morphological images confirm the spherical nature of ZrO2 NPs, and their distributions on surfaces show lower agglomerations. ZrO2 NPs showed high optical absorbance in the UV region and a wide bandgap indicating surface oxygen vacancies and charge carriers. The presence of Zr and O elements and their O=Zr=O bonds was categorized using EDX and FTIR spectroscopy. The plant molecules’ interface, bonding, binding energy, and their existence on the surface of ZrO2 NPs were established from XPS analysis. The photocatalytic degradation of methylene blue using ZrO2 NPs was examined under visible light irradiation. The 94% degradation of toxic MB dye was achieved within 20 min. The antibacterial inhibition of ZrO2 NPs was tested against S. aureus and E. coli pathogens. Applications of bio-synthesized ZrO2 NPs including organic substance removal, pathogenic inhibitor development, catalysis, optical, and biomedical development were explored.

Drug Delivery Systems in Regenerative Medicine: An Updated Review

Modern drug discovery methods led to evolving new agents with significant therapeutic potential. However, their properties, such as solubility and administration-related challenges, may hinder their benefits. Moreover, advances in biotechnology resulted in the development of a new generation of molecules with a short half-life that necessitates frequent administration. In this context, controlled release systems are required to enhance treatment efficacy and improve patient compliance. Innovative drug delivery systems are promising tools that protect therapeutic proteins and peptides against proteolytic degradation where controlled delivery is achievable. The present review provides an overview of different approaches used for drug delivery.

Green synthesis of copper oxide nanoparticles using Ephedra Alata plant extract and a study of their antifungal, antibacterial activity and photocatalytic performance under sunlight

In the present work, copper oxide (CuO NPs) was synthesized by an eco-friendly, simple, low-cost, and economical synthesis method using Ephedra Alata aqueous plant extract as a reducing and capping agent. The biosynthesized CuO-NPs were compared with chemically obtained CuO-NPs to investigate the effect of the preparation method on the structural, optical, morphological, antibacterial, antifungal, and photocatalytic properties under solar irradiation. The CuO NPs were characterized using X-ray diffraction (XRD), UV-VIS spectroscopy, Fourier transform infrared spectrometer (FTIR) analysis, and field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDX). The photocatalytic activities of biosynthetic CuO-NPs and chemically prepared CuO-NPs were studied using methylene blue upon exposure to solar irradiation. The results showed that the biosynthesized CuO photocatalyst was more efficient than the chemically synthesized CuO-NPs for Methylene Blue (MB) degradation under solar irradiation, with MB degradation rates of 93.4% and 80.2%, respectively. In addition, antibacterial and antifungal activities were evaluated. The disk diffusion technique was used to test the biosynthesized CuO-NPs against gram-negative bacteria, Staphylococcus aureus and Bacillus subtilis, as well as C. Albicans and S. cerevisiae. The biosynthesized CuO-NPs showed efficient antibacterial and antifungal activity. The obtained results revealed that the biosynthesized CuO-NPs can play a vital role in the destruction of pathogenic bacteria, the degradation of dyes, and the activity of antifungal agents in the bioremediation of industrial and domestic waste.

In vitro evaluation of copper sulfide nanoparticles decorated with folic acid/chitosan as a novel pH-sensitive nanocarrier for the efficient controlled targeted delivery of cytarabine as an anticancer drug

Nanoparticles (NPs) have gained more attention as drug delivery systems. Folic acid (FA)-chitosan (CS) conjugates, because of their biodegradability, low toxicity, and better stability, offer a pharmaceutical drug delivery tool. The aim of this work was to fabricate CuS NPs modified by CS followed by grafting FA as a nanocarrier for the delivery of cytarabine (CYT) as an anticancer drug. In this work, CuS NPs modified by CS and FA were successfully synthesized. The structural properties of the nanocarrier were characterized by using scanning electron microscopy, Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, and Brunauer-Emmett-Teller. The adsorption mechanism of CYT by adsorption isotherms, kinetics, and thermodynamics was deliberated and modeled. The in vitro CYT release behavior for the nanocarrier was 99% and 61% at pH 5.6 and 7.4, respectively. The adsorption behavior of CYT by CuS NP_s -CS-FA was well explored by pseudo-second-order kinetic and Langmuir isotherm models by the coefficient of determination (R² > 0.99). Thermodynamic results showed that the uptake of CYT by CuS NPs-CS-FA was endothermic and spontaneous. The experimental results showed that CYT/CuS NP_s -CS-FA can be proposed as an efficient nanocarrier for the targeted delivery of anticancer drugs.

Bioremediation of Hazardous Wastes Using Green Synthesis of Nanoparticles

Advanced agronomic methods, urbanisation, and industrial expansion contaminate air, water and soil, globally. Agricultural and industrial activities threaten living biota, causing biodiversity loss and serious diseases. Strategies such as bioremediation and physiochemical remediation have not been effectively beneficial at treating pollutants. Metal-based nanoparticles (NPs) such as copper, zinc, silver, gold, etc., in various nanoformulations and nanocomposites are used more and more as they effectively resist the uptake of toxic compounds via plants by facilitating their immobilisation. According to studies, bio-based NP synthesis is a recent and agroecologically friendly approach for remediating environmental waste, which is effective against carcinogens, heavy metal contamination, treating marine water polluted with excessive concentrations of phosphorus, nitrogen and harmful algae, and hazardous dye- and pesticide-contaminated water. Biogenic resources such as bacteria, fungi, algae and plants are extensively used for the biosynthesis of NPs, particularly metallic NPs. Strategies involving green synthesis of NPs are nontoxic and could be employed for commercial scale production. Here, the focus is on the green synthesis of NPs for reduction of hazardous wastes to help with the clean-up process.

Bacterial-mediated synthesis and characterization of copper oxide nanoparticles with antibacterial, antioxidant, and anticancer potentials

The application of novel bacterial strains for effective biosynthesis of nanoparticles minimizes negative environmental impact and eliminates challenges of available approaches. In the present study, cell-free extract of Stenotrophomonas sp. BS95. was used for synthesis of copper oxide nanoparticles (CuONPs). Characterization of crude and calcined CuONPs was carried out by UV-vis spectroscopy, X-ray diffraction (XRD), fourier transform infrared (FTIR) spectroscopy, zeta potential, dynamic light scattering, field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. Afterward, biogenic CuONPs were evaluated for antibacterial, antioxidant, and cytotoxic effects using broth micro-dilution method, DPPH assay and alamarBlue assay, respectively. Finally, molecular mechanisms behind anticancer effects of CuONPs was ascertained by real time PCR. UV-vis absorbance spectra registered surface plasmon resonance peaks at 286 nm and 420 nm for crude and calcined CuONPs, respectively. FTIR spectra exhibited bands associated with organic functional groups of bacterial proteins, confirming capping and functionalization of CuONPs. The average crystallite size of crude and calcined CuONPs was determined as 18.24 and 21.3 nm by XRD, respectively. The average zeta potentials of crude and calcined CuONPs were as -28.57 ± 5.13 and -29.47 ± 4.78 mV, respectively, indicating their high stability. Electron microscopy revealed that crude and calcined CuONPs were roughly spherical particles with an average size of 35.24 ± 4.64 and 43.68 ± 2.31 nm, respectively. Biogenic CuONPs induced antibacterial effects with minimal inhibitory concentrations ranging from 62.5 to 1,000 μg/ml against Gram-negative and Gram-positive strains. The antioxidant activity of crude and calcined CuONPs was found to be 83% ± 2.64% and 78% ± 1.73%, respectively. More intriguingly, CuONPs exerted considerable cytotoxic effects on human colon and gastric adenocarcinoma cells, while induced low toxicity on normal cells. Anticancer effects of biogenic CuONPs were confirmed by significant changes induced in the expression of apoptosis-related genes, including P53, BAX, BCL2 and CCND1. Hence, biosynthesized CuONPs could be considered as potential antimicrobial, antioxidant and anticancer agents.

Effect of Calcination Temperature on Structural, Morphological and Optical Properties of Copper Oxide Nanostructures Derived from Garcinia mangostana L. Leaf Extract

Synthesis of copper oxide (CuO) nanostructures via biological approach has gained attention to reduce the harmful effects of chemical synthesis. The CuO nanostructures were synthesized through a green approach using the Garcinia mangostana L. leaf extract and copper (II) nitrate trihydrate as a precursor at varying calcination temperatures (200-600 °C). The effect of calcination temperatures on the structural, morphological and optical properties of CuO nanostructures was studied. The red shifting of the green-synthesized CuO nanoparticles' absorption peak was observed in UV-visible spectrum, and the optical energy bandgap was found to decrease from 3.41 eV to 3.19 eV as the calcination temperatures increased. The PL analysis shown that synthesized CuO NPs calcinated at 500 °C has the maximum charge carriers separation. A peak located at 504-536 cm^-1 was shown in FTIR spectrum that indicated the presence of a copper-oxygen vibration band and become sharper and more intense when increasing the calcination temperature. The XRD studies revealed that the CuO nanoparticles' crystalline size was found to increase from 12.78 nm to 28.17 nm, and dislocation density decreased from 61.26 × 10¹⁴ cm^-1 to 12.60 × 10¹⁴ cm^-1, while micro strain decreased from 3.40 × 10^-4 to 1.26 × 10^-4. From the XPS measurement, only CuO single phase without impurities was detected for the green-mediated NPs calcinated at 500 °C. The morphologies of CuO nanostructures were examined using FESEM and became more spherical in shape at elevated calcination temperature. More or less spherical nanostructure of green-mediated CuO calcinated at 500 °C were also observed using TEM. The purity of the green-synthesized CuO nanoparticles was evaluated by EDX analysis, and results showed that increasing calcination temperature increases the purity of CuO nanoparticles.

Biogenic Synthesis of Copper-Based Nanomaterials Using Plant Extracts and Their Applications: Current and Future Directions

Plants have been used for multiple purposes over thousands of years in various applications such as traditional Chinese medicine and Ayurveda. More recently, the special properties of phytochemicals within plant extracts have spurred researchers to pursue interdisciplinary studies uniting nanotechnology and biotechnology. Plant-mediated green synthesis of nanomaterials utilises the phytochemicals in plant extracts to produce nanomaterials. Previous publications have demonstrated that diverse types of nanomaterials can be produced from extracts of numerous plant components. This review aims to cover in detail the use of plant extracts to produce copper (Cu)-based nanomaterials, along with their robust applications. The working principles of plant-mediated Cu-based nanomaterials in biomedical and environmental applications are also addressed. In addition, it discusses potential biotechnological solutions and new applications and research directions concerning plant-mediated Cu-based nanomaterials that are yet to be discovered so as to realise the full potential of the plant-mediated green synthesis of nanomaterials in industrial-scale production and wider applications. This review provides readers with comprehensive information, guidance, and future research directions concerning: (1) plant extraction, (2) plant-mediated synthesis of Cu-based nanomaterials, (3) the applications of plant-mediated Cu-based nanomaterials in biomedical and environmental remediation, and (4) future research directions in this area.

Bioengineering of CuO porous (nano)particles: role of surface amination in biological, antibacterial, and photocatalytic activity

Nanotechnology is one of the most impressive sciences in the twenty-first century. Not surprisingly, nanoparticles/nanomaterials have been widely deployed given their multifunctional attributes and ease of preparation via environmentally friendly, cost-effective, and simple methods. Although there are assorted optimized preparative methods for synthesizing the nanoparticles, the main challenge is to find a comprehensive method that has multifaceted properties. The goal of this study has been to synthesize aminated (nano)particles via the Rosmarinus officinalis leaf extract-mediated copper oxide; this modification leads to the preparation of (nano)particles with promising biological and photocatalytic applications. The synthesized NPs have been fully characterized, and biological activity was evaluated in antibacterial assessment against Bacillus cereus as a model Gram-positive and Pseudomonas aeruginosa as a model Gram-negative bacterium. The bio-synthesized copper oxide (nano)particles were screened by MTT assay by applying the HEK-293 cell line. The aminated (nano)particles have shown lower cytotoxicity (~ 21%), higher (~ 50%) antibacterial activity, and a considerable increase in zeta potential value (~ + 13.4 mV). The prepared (nano)particles also revealed considerable photocatalytic activity compared to other studies wherein the dye degradation process attained 97.4% promising efficiency in only 80 min and just 7% degradation after 80 min under dark conditions. The biosynthesized copper oxide (CuO) (nano)particle's biomedical investigation underscores an eco-friendly synthesis of (nano)particles, their noticeable stability in the green reaction media, and impressive biological activity.

Nanomaterials in bioelectrochemical devices: on applications enhancing their positive effect

Electrochemical biosensors and biofuel cells are finding an ever-increasing practical application due to several advantages. Biosensors are miniature measuring devices, which can be used for on-the-spot analyses, with small assay times and sample volumes. Biofuel cells have dual benefits of environmental cleanup and electric energy generation. Application of nanomaterials in biosensor and biofuel-cell devices increases their functioning efficiency and expands spheres of use. This review discusses the potential of nanomaterials in improving the basic parameters of bioelectrochemical systems, including the sensitivity increase, detection lower-limit decrease, detection-range change, lifetime increase, substrate-specificity control. In most cases, the consideration of the role of nanomaterials links a certain type of nanomaterial with its effect on the bioelectrochemical device upon the whole. The review aims at assessing the effects of nanomaterials on particular analytical parameters of a biosensor/biofuel-cell bioelectrochemical device.

Production, Characterization, and Cytotoxicity Effects of Silver Nanoparticles from Brown Alga (Cystoseira myrica)

A green, eco-friendly approach to biosynthesizing silver nanoparticles has been reported for marine macroalga (Cystoseira myrica) extract as a reducing agent. Different pH and temperature impact the green synthesis of silver nanoparticles suggesting that the synthesis depends greatly on pH and temperature. The structure and characters of synthesized nanoparticles were confirmed using HR-TEM, DLS, XRD, and FTIR. Cytotoxicity was indicated using provided cell lines of breast carcinoma cells (MCF-7) and human hepatocellular carcinoma cells (HepG2). Shape of silver nanoparticles at pH 9 and 75°C for 30 min was found to be suitable for the biosynthesis process and the AgNPs exhibited a characteristic absorption peak at 434 nm. High Resolution Electron Microscope Transmission reported polydisperse and spherical shapes ranging from 8 to 15 nm. High attractive and repulsive forces between each nanoparticle were recorded with an average zeta-potential value of approximately −29.3 mV. The X-ray diffraction study revealed the crystalline structure of silver nanoparticles. FTIR has shown the bioreduction of silver ions to silver nanoparticles through biomolecules found in algal extract. Silver nanoparticles have been found to have anticancer activity. The cytotoxicity assay was studied against MCF-7 and HepG2 at various concentrations (100, 50, 25, 12.5, 6.25, 3.125, 1.56, 0.78, 0.39, 0.2, and 0.1 μg/mL). By increasing the concentration of AgNPs from 0.1 to 100 μg/mL, the maximum percentage of viability against MCF-7 and HepG2 cell line decreased from 94.55 ± 7.55 to 19.879 ± 0.503 and from 78.56 ± 11.36 to 25.81 ± 2.66 after time exposure, respectively.

Biomimetic facile synthesis of zinc oxide and copper oxide nanoparticles from Elaeagnus indica for enhanced photocatalytic activity

The present study focused on synthesizing ZnO nanoparticles (NPs) and CuO NPs using Elaeagnus indica leaf extract as reducing and stabilizing agents using Zn(O₂CCH₃)₂ and Cu₂SO₄, respectively, for the first time. We have confirmed the formation of aggregated ZnO NPs and CuO NPs with phytochemicals by various spectral analyses and electron microscopy studies. The size of synthesized ZnO NPs and CuO NPs were in the range of 20-30 nm and 30-40 nm, respectively. The antimicrobial activity of ZnO NPs at 75 μg concentration is superior against Salmonella typhimurium, Klebsiella pneumonia, Bacillus subtilis, Staphylococcus epidermidis, and Aspergillus niger. While CuO nanoparticles with 75 μg concentration effectively inhibited S. typhimurium, B. subtilis, S. epidermidis, and A. niger. Phytochemicals and reactive oxygen species generated by the prepared NPs may account for the antimicrobial effects observed. The photodegradation of methylene blue by ZnO NPs and CuO NPs was 91% and 76%, respectively, for 6 h of sunlight exposure. CuO NPs and ZnO NPs have different intrinsic properties and phytochemical compositions; hence ZnO NPs photodegrade faster than CuO NPs even though ZnO has higher bandgap energy than CuO. Consequently, CuO and ZnO NPs produced from E. indica leaf extract might be utilized as antimicrobials and photocatalysts in the future.