Lithium-mediated electrochemical nitrogen reduction: Mechanistic insights to enhance performance

Localized High-Concentration Electrolyte in Li-Mediated Nitrogen Reduction for Ammonia Synthesis

The lithium-mediated nitrogen reduction reaction (Li-NRR) is a promising green alternative to the Haber-Bosch process for ammonia synthesis. The solid electrolyte interphase (SEI) is crucial for high efficiency and stability, as it regulates reactant diffusion and suppresses side reactions. The SEI properties are greatly influenced by the Li+ ion solvation structure, which is controllable through electrolyte engineering. Although anion-derived SEI enhances selectivity and stability, it has typically been engineered using high-concentration electrolytes (HCEs), which face mass transfer, viscosity, and cost issues. In this study, a localized high-concentration electrolyte (LHCE) in the Li-NRR is first introduced, enabling the formation of anion-derived SEI in a low-concentration electrolyte (LCE) by enhancing the Li-anion coordination using an antisolvent. Among various antisolvents, 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE) achieves the highest ammonia Faradaic efficiency (73.6 ± 2.5%), more than double that of the LCE (34.3 ± 2.8%) and exceeding the HCE (56.0 ± 2.8%). Systematic calculations and experimental analyses show that the LHCE exhibits anion-rich solvation structures and forms thin, inorganic SEI. Moreover, the LHCE has advantages of low viscosity and high N2 solubility, which facilitate mass transport. This study suggests the application of LHCE as an effective electrolyte engineering strategy to enhance the Li-NRR efficiency.

Insight into Fluoride Additives to Enhance Ammonia Production from Lithium-Mediated Electrochemical Nitrogen Reduction Reaction

Demands for green ammonia production increase due to its application as a proton carrier, and recent achievements in electrochemical Li-mediated nitrogen reduction reactions (Li-NRRs) show promising reliability. Here, it is demonstrated that F-containing additives in the electrolyte improve ammonia production by modulating the solid electrolyte interphase (SEI). It is suggested that the anionic additives with low lowest unoccupied molecular orbital levels enhance efficiency by contributing to the formation of a conductive SEI incorporated with LiF. Specifically, as little as 0.3 wt.% of BF4 - additive to the electrolyte, the Faradaic efficiency (FE) for ammonia production is enhanced by over 15% compared to an additive-free electrolyte, achieving a high yield of 161 ± 3 nmol s-1 cm-2. The BF4 - additive exhibits advantages, with decreased overpotential and improved FE, compared to its use as the bulk electrolyte. The observation of the Li3N upper layer implies that active Li-NRR catalytic cycles are occurring on the outermost SEI, and density functional theory simulations propose that an SEI incorporated with LiF facilitates energy profiles for the protonation by adjusting the binding energies of the intermediates compared to bare copper. This study unlocks the potential of additives and offers insights into the SEIs for efficient Li-NRRs.

Catalysts with Trimetallic Sites on Graphene-like C2N for Electrocatalytic Nitrogen Reduction Reaction: A Theoretical Investigation

Electrocatalytic nitrogen reduction reaction (NRR) is a green and highly efficient way to replace the industrial Haber-Bosch process. Herein, clusters consisting of three transition metal atoms loaded on C2N as NRR electrocatalysts are investigated using density functional theory (DFT). Meanwhile, Ca was introduced as a promoter and the role of Ca in NRR was investigated. It was found that Ca anchored to the catalyst can act as an electron donor and effectively promote the activation of N2 on M3. In both M3@C2N and M3Ca@C2N (M=Fe, Co, Ni), the limiting potential (UL) is less negative than that of the Ru(0001) surface and has the ability to suppress the competitive hydrogen evolution reaction (HER). Among them, Fe3@C2N is suggested to be the most promising candidate for NRR with high thermal stability, strong N2 adsorption ability, low limiting potential, and good NRR selectivity. The concepts of trimetallic sites and alkaline earth metal promoters in this work provide theoretical guidance for the rational design of atomically active sites in electrocatalytic NRR.

Cu(N2)-Li Battery for Ammonia Synthesis

The cathodic mechanism of Li-N2 batteries is similar to Li-mediated N2 reduction (LiNR). Herein, the Li-N2, LiNR, and Cu-Li battery were amalgamated to a milliliter-scale Cu(N2)-Li system. The utilization of a lithium anode with lithium oxidation reaction (LiOR), ensures an uninterrupted supply of lithium ions to active N2. LiOR not only enhances electrolyte stability but also reduces voltage by stripping Li ions, in contrast to the inert platinum anode, commonly employed in LiNR. Notably, an unusual observation of ammonia accumulation within the anode chamber elucidates the presence and role of reaction intermediates. The charging process aimed at lithium regeneration faces high polarization, and a cycling procedure involving low-current charging was proposed to improve cycling. This study integrates insights from three distinct research directions to leverage their respective advantages and scientific insights. The Li-N2 battery emerges as a highly advantageous strategy for ammonia synthesis due to the progressiveness of lithium anode.

Long-term continuous ammonia electrosynthesis

Ammonia is crucial as a fertilizer and in the chemical industry and is considered to be a carbon-free fuel1. Ammonia electrosynthesis from nitrogen under ambient conditions offers an attractive alternative to the Haber-Bosch process2,3, and lithium-mediated nitrogen reduction represents a promising approach to continuous-flow ammonia electrosynthesis, coupling nitrogen reduction with hydrogen oxidation4. However, tetrahydrofuran, which is commonly used as a solvent, impedes long-term ammonia production owing to polymerization and volatility problems. Here we show that a chain-ether-based electrolyte enables long-term continuous ammonia synthesis. We find that a chain-ether-based solvent exhibits non-polymerization properties and a high boiling point (162 °C) and forms a compact solid-electrolyte interphase layer on the gas diffusion electrode, facilitating ammonia release in the gas phase and ensuring electrolyte stability. We demonstrate 300 h of continuous operation in a flow electrolyser with a 25 cm2 electrode at 1 bar pressure and room temperature, and achieve a current-to-ammonia efficiency of 64 ± 1% with a gas-phase ammonia content of approximately 98%. Our results highlight the crucial role of the solvent in long-term continuous ammonia synthesis.

Electrochemical Nitrate Reduction: Ammonia Synthesis and the Beyond

Natural nitrogen cycle has been severely disrupted by anthropogenic activities. The overuse of N-containing fertilizers induces the increase of nitrate level in surface and ground waters, and substantial emission of nitrogen oxides causes heavy air pollution. Nitrogen gas, as the main component of air, has been used for mass ammonia production for over a century, providing enough nutrition for agriculture to support world population increase. In the last decade, researchers have made great efforts to develop ammonia processes under ambient conditions to combat the intensive energy consumption and high carbon emission associated with the Haber-Bosch process. Among different techniques, electrochemical nitrate reduction reaction (NO3RR) can achieve nitrate removal and ammonia generation simultaneously using renewable electricity as the power, and there is an exponential growth of studies in this research direction. Here, a timely and comprehensive review on the important progresses of electrochemical NO3RR, covering the rational design of electrocatalysts, emerging CN coupling reactions, and advanced energy conversion and storage systems is provided. Moreover, future perspectives are proposed to accelerate the industrialized NH3 production and green synthesis of chemicals, leading to a sustainable nitrogen cycle via prosperous N-based electrochemistry.

Phenol as proton shuttle and buffer for lithium-mediated ammonia electrosynthesis

Ammonia is a crucial component in the production of fertilizers and various nitrogen-based compounds. Now, the lithium-mediated nitrogen reduction reaction (Li-NRR) has emerged as a promising approach for ammonia synthesis at ambient conditions. The proton shuttle plays a critical role in the proton transfer process during Li-NRR. However, the structure-activity relationship and design principles for effective proton shuttles have not yet been established in practical Li-NRR systems. Here, we propose a general procedure for verifying a true proton shuttle and established design principles for effective proton shuttles. We systematically evaluate several classes of proton shuttles in a continuous-flow reactor with hydrogen oxidation at the anode. Among the tested proton shuttles, phenol exhibits the highest Faradaic efficiency of 72 ± 3% towards ammonia, surpassing that of ethanol, which has been commonly used so far. Experimental investigations including operando isotope-labelled mass spectrometry proved the proton-shuttling capability of phenol. Further mass transport modeling sheds light on the mechanism.

NH3 Electrosynthesis from N2 Molecules: Progresses, Challenges, and Future Perspectives

Green ammonia (NH3), made by using renewable electricity to split nearly limitless nitrogen (N2) molecules, is a vital platform molecule and an ideal fuel to drive the sustainable development of human society without carbon dioxide emission. The NH3 electrosynthesis field currently faces the dilemma of low yield rate and efficiency; however, decoupling the overlapping issues of this area and providing guidelines for its development directions are not trivial because it involves complex reaction process and multidisciplinary entries (for example, electrochemistry, catalysis, interfaces, processes, etc.). In this Perspective, we introduce a classification scheme for NH3 electrosynthesis based on the reaction process, namely, direct (N2 reduction reaction) and indirect electrosynthesis (Li-mediated/plasma-enabled NH3 electrosynthesis). This categorization allows us to finely decouple the complicated reaction pathways and identify the specific rate-determining steps/bottleneck issues for each synthesis approach such as N2 activation, H2 evolution side reaction, solid-electrolyte interphase engineering, plasma process, etc. We then present a detailed overview of the latest progresses on solving these core issues in terms of the whole electrochemical system covering the electrocatalysts, electrodes, electrolytes, electrolyzers, etc. Finally, we discuss the research focuses and the promising strategies for the development of NH3 electrosynthesis in the future with a multiscale perspective of atomistic mechanisms, nanoscale electrocatalysts, microscale electrodes/interfaces, and macroscale electrolyzers/processes. It is expected that this Perspective will provide the readers with an in-depth understanding of the bottleneck issues and insightful guidance on designing the efficient NH3 electrosynthesis systems.

Calcium-mediated nitrogen reduction for electrochemical ammonia synthesis

Ammonia (NH3) is a key commodity chemical for the agricultural, textile and pharmaceutical industries, but its production via the Haber-Bosch process is carbon-intensive and centralized. Alternatively, an electrochemical method could enable decentralized, ambient NH3 production that can be paired with renewable energy. The first verified electrochemical method for NH3 synthesis was a process mediated by lithium (Li) in organic electrolytes. So far, however, elements other than Li remain unexplored in this process for potential benefits in efficiency, reaction rates, device design, abundance and stability. In our demonstration of a Li-free system, we found that calcium can mediate the reduction of nitrogen for NH3 synthesis. We verified the calcium-mediated process using a rigorous protocol and achieved an NH3 Faradaic efficiency of 40 ± 2% using calcium tetrakis(hexafluoroisopropyloxy)borate (Ca[B(hfip)4]2) as the electrolyte. Our results offer the possibility of using abundant materials for the electrochemical production of NH3, a critical chemical precursor and promising energy vector.

Li-Mediated Electrochemical Nitrogen Fixation: Key Advances and Future Perspectives

The electrochemical nitrogen reduction reaction holds great potential for ammonia production using electricity generated from renewable energy sources and is sustainable. The low solubility of nitrogen in aqueous media, poor kinetics, and intrinsic competition by the hydrogen evolution reaction result in meager ammonia production rates. Attributing measured ammonia as a valid product, not an impurity, is challenging despite rigorous analytical experimentation. In this regard, Li-mediated electrochemical nitrogen reduction is a proven method providing significant ammonia yields. Herein, fundamental advances and insights into the Li-mediated strategy are summarized, emphasizing the role of lithium, reaction parameters, cell designs, and mechanistic evaluation. Challenges and perspectives are presented to highlight the prospects of this strategy as a continuous, stable, and modular approach toward sustainable ammonia production.

Lithium-Mediated Ammonia Electrosynthesis with Ether-Based Electrolytes

Ammonia is of great importance in fertilizer production and chemical synthesis. It can also potentially serve as a carbon-free energy carrier for a future hydrogen economy. Motivated by a worldwide effort to lower carbon emissions, ammonia synthesis by lithium-mediated electrochemical nitrogen reduction (LiNR) has been considered as a promising alternative to the Haber-Bosch process. A significant performance improvement in LiNR has been achieved in recent years by exploration of favorable lithium salt and proton donor for the electrolyte recipe, but the solvent study is still in its infancy. In this work, a systematic investigation on ether-based solvents toward LiNR is conducted. The assessments of solvent candidates are built on their conductivity, parasitic reactions, product distribution, and faradaic efficiency. Notably, dimethoxyethane gives the lowest potential loss among the investigated systems, while tetrahydrofuran achieves an outstanding faradaic efficiency of 58.5 ± 6.1% at an ambient pressure. We found that solvent molecules impact the above characteristics by dictating the solvation configurations of conductive ions and inducing the formation of solid electrolyte interphase with different compositions. This study highlights the importance of solvents in the LiNR process and advances the electrolyte optimization for better performance.

Is Ethanol Essential for the Lithium-Mediated Nitrogen Reduction Reaction?

The lithium-mediated nitrogen reduction reaction (Li-NRR) is a promising method for decentralized ammonia synthesis using renewable energy. An organic electrolyte is utilized to combat the competing hydrogen evolution reaction, and lithium is plated to activate the inert N2 molecule. Ethanol is commonly used as a proton shuttle to provide hydrogen to the activated nitrogen. In this study, we investigate the role of ethanol as a proton shuttle in an electrolyte containing tetrahydrofuran and 0.2 M lithium perchlorate. Particularly designed electrochemical experiments show that ethanol is necessary for a good solid-electrolyte interphase but not for the synthesis of ammonia. In addition, electrochemical quartz crystal microbalance (EQCM) demonstrates that the SEI formation at the onset of lithium plating is of specific importance. Chemical batch synthesis of ammonia combined with real-time mass spectrometry confirms that protons can be shuttled from the anode to the cathode by other species even without ethanol. Moreover, it raises questions regarding the electrochemical nature of Li-NRR. Finally, we discuss electrolyte stability and electrochemical electrode potentials, highlighting the role of ethanol on electrolyte degradation.

Nitrogen Electrocatalysis: Electrolyte Engineering Strategies to Boost Faradaic Efficiency

The electrochemical activation of dinitrogen at ambient temperature and pressure for the synthesis of ammonia has drawn increasing attention. The faradaic efficiency (FE) as well as ammonia yield in the electrochemical synthesis is far from reaching the requirement of industrial-scale production. In aqueous electrolytes, the competing electron-consuming hydrogen evolution reaction (HER) and poor solubility of nitrogen are the two major bottlenecks. As the electrochemical reduction of nitrogen involves proton-coupled electron transfer reaction, rationally engineered electrolytes are required to boost FE and ammonia yield. In this Review, we comprehensively summarize various electrolyte engineering strategies to boost the FE in aqueous and non-aqueous medium and suggest possible approaches to further improve the performance. In aqueous medium, the performance can be improved by altering the electrolyte pH, transport velocity of protons, and water activity. Other strategies involve the use of hybrid and water-in-salt electrolytes, ionic liquids, and non-aqueous electrolytes. Existing aqueous electrolytes are not ideal for industrial-scale production. Suppression of HER and enhanced nitrogen solubility have been observed with hybrid and non-aqueous electrolytes. The engineered electrolytes are very promising though the electrochemical activation has several challenges. The outcome of lithium-mediated nitrogen reduction reaction with engineered non-aqueous electrolyte is highly encouraging.

Nitrogen Photoelectrochemical Reduction on TiB2 Surface Plasmon Coupling Allows Us to Reach Enhanced Efficiency of Ammonia Production

Ammonia is one of the most widely produced chemicals worldwide, which is consumed in the fertilizer industry and is also considered an interesting alternative in energy storage. However, common ammonia production is energy-demanding and leads to high CO2 emissions. Thus, the development of alternative ammonia production methods based on available raw materials (air, for example) and renewable energy sources is highly demanding. In this work, we demonstrated the utilization of TiB2 nanostructures sandwiched between coupled plasmonic nanostructures (gold nanoparticles and gold grating) for photoelectrochemical (PEC) nitrogen reduction and selective ammonia production. The utilization of the coupled plasmon structure allows us to reach efficient sunlight capture with a subdiffraction concentration of light energy in the space, where the catalytically active TiB2 flakes were placed. As a result, PEC experiments performed at -0.2 V (vs. RHE) and simulated sunlight illumination give the 535.2 and 491.3 μg h-1 mgcat-1 ammonia yields, respectively, with the utilization of pure nitrogen and air as a nitrogen source. In addition, a number of control experiments confirm the key role of plasmon coupling in increasing the ammonia yield, the selectivity of ammonia production, and the durability of the proposed system. Finally, we have performed a series of numerical and quantum mechanical calculations to evaluate the plasmonic contribution to the activation of nitrogen on the TiB2 surface, indicating an increase in the catalytic activity under the plasmon-generated electric field.

Electrochemical Nitrogen Fixation for Green Ammonia: Recent Progress and Challenges

Ammonia, a key feedstock used in various industries, has been considered a sustainable fuel and energy storage option. However, NH3 production via the conventional Haber-Bosch process is costly, energy-intensive, and significantly contributing to a massive carbon footprint. An electrochemical synthetic pathway for nitrogen fixation has recently gained considerable attention as NH3 can be produced through a green process without generating harmful pollutants. This review discusses the recent progress and challenges associated with the two relevant electrochemical pathways: direct and indirect nitrogen reduction reactions. The detailed mechanisms of these reactions and highlight the recent efforts to improve the catalytic performances are discussed. Finally, various promising research strategies and remaining tasks are presented to highlight future opportunities in the electrochemical nitrogen reduction reaction.

High-efficiency electrocatalytic nitrite reduction toward ammonia synthesis on CoP@TiO2 nanoribbon array

Electrochemical reduction of nitrite (NO₂^-) can satisfy the necessity for NO₂^- contaminant removal and deliver a sustainable pathway for ammonia (NH₃) generation. Its practical application yet requires highly efficient electrocatalysts to boost NH₃ yield and Faradaic efficiency (FE). In this study, CoP nanoparticle-decorated TiO₂ nanoribbon array on Ti plate (CoP@TiO₂/TP) is verified as a high-efficiency electrocatalyst for the selective reduction of NO₂^- to NH₃. When measured in 0.1 M NaOH with NO₂^-, the freestanding CoP@TiO₂/TP electrode delivers a large NH₃ yield of 849.57 μmol h^-1 cm^-2 and a high FE of 97.01% with good stability. Remarkably, the subsequently fabricated Zn-NO₂^- battery achieves a high power density of 1.24 mW cm^-2 while delivering a NH₃ yield of 714.40 μg h^-1 cm^-2.

Advancing electrocatalytic nitrogen fixation: insights from molecular systems

Nitrogen fixation has a rich history within the inorganic chemistry community. In recent years attention has (re)focused on developing electrocatalytic systems capable of mediating the nitrogen reduction reaction (N2RR). Well-defined molecular catalyst systems have much to offer in this context. This personal perspective summarizes recent progress from our laboratory at Caltech, pulling together lessons learned from a number of studies we have conducted, placing them within the broader context of thermodynamic efficiency and selectivity for the N2RR. In particular, proton-coupled electron transfer (PCET) provides an attractive strategy to achieve enhanced efficiency for the multi-electron/proton reduction of N2 to produce NH3 (or NH4+), and electrocatalytic PCET (ePCET) via an ePCET mediator affords a promising means of mitigating HER such that the N2RR can be achieved in a catalytic fashion.

Li-N2 Battery for Ammonia Synthesis and Computational Insight

Electrochemical synthesis of ammonia is deemed as an alternative to the fossil-fuel-driven Haber-Bosch (HB) process, in which Li-mediated nitrogen reduction (LiNR) is the most promising scheme. Continuous lithium-mediated nitrogen reduction for ammonia synthesis (C-LiNR) has recently been reported in high-level journals with many foggy internal reactions. Synthesizing ammonia in a separate way may be profitable for understanding the mechanism of LiNR. Herein, an intermittent lithium-mediated nitrogen reduction for ammonia synthesis (I-LiNR) was proposed, three steps required for I-LiNR were achieved in the cathode chamber of a Li-N₂ battery. Discharge, stand, and charge in the Li-N₂ battery correspond to N₂ lithification, protonation, and lithium regeneration, respectively. It can also realize the quasi-continuous process with practical significance because it could be carried out through identical batteries. Products such as Li₃N, LiOH, and NH₃ are detected experimentally, which demonstrate a definite reaction pathway. The mechanism of the Li-N₂ battery, the Li-mediated synthesis of ammonia, and LiOH decomposition are explored through density functional theory calculations. The role of Li in dinitrogen activation is highlighted. It expands the range of LiOH-based Li-air batteries and may guide the study from Li-air to Li-N₂; attention has been given to the reaction mechanism of Li-mediated nitrogen reduction. The challenges and opportunities of the procedure are discussed in the end.

Continuous-flow electrosynthesis of ammonia by nitrogen reduction and hydrogen oxidation

Ammonia is a critical component in fertilizers, pharmaceuticals, and fine chemicals and is an ideal, carbon-free fuel. Recently, lithium-mediated nitrogen reduction has proven to be a promising route for electrochemical ammonia synthesis at ambient conditions. In this work, we report a continuous-flow electrolyzer equipped with 25-square centimeter-effective area gas diffusion electrodes wherein nitrogen reduction is coupled with hydrogen oxidation. We show that the classical catalyst platinum is not stable for hydrogen oxidation in the organic electrolyte, but a platinum-gold alloy lowers the anode potential and avoids the decremental decomposition of the organic electrolyte. At optimal operating conditions, we achieve, at 1 bar, a faradaic efficiency for ammonia production of up to 61 ± 1% and an energy efficiency of 13 ± 1% at a current density of -6 milliamperes per square centimeter.

Water Increases the Faradaic Selectivity of Li-Mediated Nitrogen Reduction

The lithium-mediated system catalyzes nitrogen to ammonia under ambient conditions. Herein we discover that trace amount of water as an electrolyte additive-in contrast to prior reports from the literature-can effect a dramatic improvement in the Faradaic selectivity of N2 reduction to NH3. We report that an optimal water concentration of 35.9 mM and LiClO4 salt concentration of 0.8 M allows a Faradaic efficiency up to 27.9 ± 2.5% at ambient pressure. We attribute the increase in Faradaic efficiency to the incorporation of Li2O in the solid electrolyte interphase, as suggested by our X-ray photoelectron spectroscopy measurements. Our results highlight the extreme sensitivity of lithium-mediated N2 reduction to small changes in the experimental conditions.

Nonaqueous Li-Mediated Nitrogen Reduction: Taking Control of Potentials

The performance of the Li-mediated ammonia synthesis has progressed dramatically since its recent reintroduction. However, fundamental understanding of this reaction is slower paced, due to the many uncontrolled variables influencing it. To address this, we developed a true nonaqueous LiFePO4 reference electrode, providing both a redox anchor from which to measure potentials against and estimates of sources of energy efficiency loss. We demonstrate its stable electrochemical potential in operation using different N2- and H2-saturated electrolytes. Using this reference, we uncover the relation between partial current density and potentials. While the counter electrode potential increases linearly with current, the working electrode remains stable at lithium plating, suggesting it to be the only electrochemical step involved in this process. We also use the LiFePO4/Li+ equilibrium as a tool to probe Li-ion activity changes in situ. We hope to drive the field toward more defined systems to allow a holistic understanding of this reaction.

Electrosynthesis of ammonia with high selectivity and high rates via engineering of the solid-electrolyte interphase

Ammonia is a large-scale commodity essential to fertilizer production, but the Haber-Bosch process leads to massive emissions of carbon dioxide. Electrochemical ammonia synthesis is an attractive alternative pathway, but the process is still limited by low ammonia production rate and faradaic efficiency. Herein, guided by our theoretical model, we present a highly efficient lithium-mediated process enabled by using different lithium salts, leading to the formation of a uniform solid-electrolyte interphase (SEI) layer on a porous copper electrode. The uniform lithium-fluoride-enriched SEI layer provides an ammonia production rate of 2.5 ± 0.1 μmol s^-1 cm_geo ^-2 at a current density of -1 A cm_geo ^-2 with 71% ± 3% faradaic efficiency under 20 bar nitrogen. Experimental X-ray analysis reveals that the lithium tetrafluoroborate electrolyte induces the formation of a compact and uniform SEI layer, which facilitates homogeneous lithium plating, suppresses the undesired hydrogen evolution as well as electrolyte decomposition, and enhances the nitrogen reduction.

Fe-VS2 Electrocatalyst with Organic Matrix-Mediated Electron Transfer for Highly Efficient Nitrogen Fixation

Electrochemical N₂ fixation is considered to be a promising alternative to Haber-Bosch technology. Inspired by the composition and structure of natural nitrogenase, Fe-doped VS₂ nanosheets were prepared via one-step solvothermal method. The electron transfer system mediated by organic conductive polymer (1-AAQ-PA) was constructed to promote the electron transfer between Fe-VS₂ nanosheets and the electrode in electrocatalytic N₂ reduction reaction (NRR). The obtained 1-AAQ-PA-Fe-VS₂ electrode converted N₂ to NH₃ with a yield of 31.6 μg h^-1  mg^-1 at -0.35 V vs. reversible hydrogen electrode and high faradaic efficiency of 23.5 %. The introduction of Fe dopants favored N₂ adsorption and activation, while the Li-S bond between Fe-VS₂ and Li₂ SO₄ effectively inhibited hydrogen evolution. The highly efficient electron utilization in the electrocatalytic NRR process was realized using the 1-AAQ-PA as the electron transfer medium. Density functional theory calculations showed that N₂ was preferentially adsorbed on Fe and reduced to NH₃ via both distal and alternating mechanism.

Evaluation of Electrocatalytic Activity of Noble Metal Catalysts Toward Nitrogen Reduction Reaction in Aqueous Solutions under Ambient Conditions

Electrochemical nitrogen reduction reaction (NRR) is intensively investigated by researchers for its potential to be the next-generation technology to produce ammonia. Many attempts have been made to explore the possibility of electrochemical ammonia production catalyzed by noble metals. However, the produced ammonia in most reported cases is in ppm level or even lower, which is susceptible to potential contaminants in experiments, leading to fluctuating or even contradictory results. Herein, a rigorous procedure was adopted to systematically evaluated the performance of commercial noble metal nanocatalysts toward NRR. No discernible amount of ammonia was detected in either acidic or alkaline solutions. Further, nitrogen-containing contaminants in catalysts that might cause false positive results were detected and characterized. An effective way to remove pre-existing pollutants by consecutive cyclic voltammetry scan was proposed, helping to obtain reliable and reproducible results.