Biomechanics of the tympanic membrane

Latent stem cell-stimulating radially aligned electrospun nanofibrous patches for chronic tympanic membrane perforation therapy

Chronic tympanic membrane (TM) perforation is a tubotympanic disease caused by either traumatic injury or inflammation. A recent study demonstrated significant progress in promoting the regeneration of chronic TM perforations through the application of nanofibers with radially aligned nanostructures and controlled release of growth factors. However, radially aligned nanostructures with stem cell-stimulating factors have never been used. In this study, insulin-like growth factor binding factor 2 (IGFBP2)-incorporated radially aligned nanofibrous patches (IRA-NFPs) were developed and applied to regenerate chronic TM perforations. The IRA-NFPs were prepared by electrospinning 8 wt% polycaprolactone in trifluoroethanol and acetic acid (9:1). Random nanofibers (RFs) and aligned nanofibers (AFs) were successfully fabricated using a flat plate and a custom-designed circular collector, respectively. The presence of IGFBP2 was confirmed via Fourier transform infrared spectroscopy and the release of IGFBP2 was sustained for up to 20 days. In vitro studies revealed enhanced cellular proliferation and migration on AFs compared to RFs, and the incorporation of IGFBP2 further promoted these effects. Quantitative real-time PCR revealed mRNA downregulation, correlating with accelerated migration and increased cell confluency. In vivo studies showed IGFBP2-loaded RF and AF patches increased regeneration success rates by 1.59-fold and 2.23-fold, respectively, while also reducing healing time by 2.5-fold compared to the control. Furthermore, IGFBP2-incorporated AFs demonstrated superior efficacy in healing larger perforations with enhanced histological similarity to native TMs. This study, combining stem cell stimulating factors and aligned nanostructures, proposes a novel approach potentially replacing conventional surgical methods for chronic TM perforation regeneration. STATEMENT OF SIGNIFICANCE: Chronic otitis media (COM) affects approximately 200 million people worldwide due to inflammation, inadequate blood supply, and lack of growth factors. Current surgical treatments have limitations like high costs and anesthetic risks. Recent research explored the use of nanofibers with radially aligned nanostructures and controlled release of growth factors to treat chronic tympanic membrane (TM) perforations. In this study, insulin-like growth factor binding protein 2 (IGFBP2)-incorporated radially aligned nanofibrous patches (IRA-NFPs) were developed and applied to regenerate chronic TM perforations. We assessed their properties and efficacy through in vitro and in vivo studies. IRA-NFPs showed promising healing capabilities with chronic TM perforation models. This innovative approach has the potential to improve COM management, reduce surgery costs, and enhance patient safety.

Experimental Study of Needle Insertion into Gerbil Tympanic Membrane

The perforation characteristics and fracture-related mechanical properties of the tympanic membrane (TM) greatly affect surgical procedures like myringotomy and tympanostomy performed on the middle ear. We analyzed the most important features of the gerbil TM perforation using an experimental approach that was based on force measurement during a 2-cycle needle insertion/extraction process. Fracture energy, friction energy, strain energy, and hysteresis loss were taken into consideration for the analysis of the different stages of needle insertion and extraction. The results demonstrated that (1) although the TM shows viscoelastic behavior, the contribution of hysteresis loss was negligible compared to other irreversible dissipated energy components (i.e., fracture energy and friction energy). (2) The TM puncture force did not substantially change during the first hours after animal death, but interestingly, it increased after 1 week due to the drying effects of soft tissue. (3) The needle geometry affected the crack length and the most important features of the force-displacement plot for the needle insertion process (puncture force, puncture displacement, and jump-in force) increased with increasing needle diameter, whereas the insertion velocity only changed the puncture and jump-in forces (both increased with increasing insertion velocity) and did not have a noticeable effect on the puncture displacement. (4) The fracture toughness of the gerbil TM was almost independent of the needle geometry and was found to be around 0.33 ± 0.10 kJ/m2.

A Pseudo-Surfactant Chemical Permeation Enhancer to Treat Otitis Media via Sustained Transtympanic Delivery of Antibiotics

Chemical permeation enhancers (CPEs) represent a prevalent and safe strategy to enable noninvasive drug delivery across skin-like biological barriers such as the tympanic membrane (TM). While most existing CPEs interact strongly with the lipid bilayers in the stratum corneum to create defects as diffusion paths, their interactions with the delivery system, such as polymers forming a hydrogel, can compromise gelation, formulation stability, and drug diffusion. To overcome this challenge, differing interactions between CPEs and the hydrogel system are explored, especially those with sodium dodecyl sulfate (SDS), an ionic surfactant and a common CPE, and those with methyl laurate (ML), a nonionic counterpart with a similar length alkyl chain. Notably, the use of ML effectively decouples permeation enhancement from gelation, enabling sustained delivery across TMs to treat acute otitis media (AOM), which is not possible with the use of SDS. Ciprofloxacin and ML are shown to form a pseudo-surfactant that significantly boosts transtympanic permeation. The middle ear ciprofloxacin concentration is increased by 70-fold in vivo in a chinchilla AOM model, yielding superior efficacy and biocompatibility than the previous highest-performing formulation. Beyond improved efficacy and biocompatibility, this single-CPE formulation significantly accelerates its progression toward clinical deployment.

Semi-automatic algorithm to build finite element numerical models of the human hearing system from Micro-CT data

Finite Element modeling has been an extended methodology to build numerical model to simulate the behavior of the hearing system. Due to the complexity of the system and the difficulties to reduce the uncertainties of the geometric data, they result in computationally expensive models, sometimes generic, representative of average geometries. It makes it difficult to validate the model with direct experimental data from the same specimen or to establish a patient-oriented modeling strategy. In the present paper, a first attempt to automatize the process of model building is made. The source information is geometrical information obtained from CT of the different elements that compose the system. Importing that data, we have designed the complete procedure to build a model including tympanic membrane, ossicular chain and cavities. The methodology includes the proper coupling of all the elements and the generation of the corresponding finite element model. The whole automatic procedure is not complete, as we need to make some human-assisted decisions; however, the model development time is reduced from 4 weeks to approximately 3 days. The goal of the modeling algorithm is to build a Finite Element Model with a limited computational cost. Several tasks as contour identification or model decimation are designed and integrated in order to follow a semi-automated process that allows generating a patient-oriented model.

The importance of mechanical and biological cues of tympanic membrane grafts to ensure optimal regeneration

Chronic suppurative otitis media (CSOM) is often associated with permanent tympanic membrane (TM) perforation and conductive hearing loss. The current clinical gold standard, using autografts and allografts, suffers from several drawbacks. Artificial replacement materials can help to overcome these drawbacks. Therefore, scaffolds fabricated through digital light processing (DLP) were herein created to support TM regeneration. Various UV-curable printing inks, including gelatin methacryloyl (GelMA), gelatin-norbornene-norbornene (GelNBNB) (crosslinked with thiolated gelatin (GelSH)) and alkene-functionalized poly-ε-caprolactone (E-PCL) (crosslinked with pentaerythritol tetrakis(3-mercaptopropionate) (PETA4SH)) were optimized regarding photo-initiator (PI) and photo-absorber (PA) concentrations through viscosity characterization, photo-rheology and the establishment of working curves for DLP. Our material platform enabled the development of constructs with a range of mechanical properties (plateau storage modulus varying between 15 and 119 kPa). Excellent network connectivity for the GelNBNB and E-PCL constructs was demonstrated (gel fractions >95 %) whereas a post-crosslinking step was required for the GelMA constructs. All samples showed excellent biocompatibility (viability >93 % and metabolic activity >88 %). Finally, in vivo and ex vivo assessments, including histology, vibration and deformation responses measured through laser doppler vibrometry and digital image correlation respectively, were performed to investigate the effects of the scaffolds on the anatomical and physiological regeneration of acute TM perforations in rabbits. The data showed that the most efficient healing with the best functional quality was obtained when both mechanical (obtained with the PCL-based resin) and biological (obtained with the gelatin-based resins) material properties were taken into account.

Three-Dimensional-Printed GelMA-KerMA Composite Patches as an Innovative Platform for Potential Tissue Engineering of Tympanic Membrane Perforations

Tympanic membrane (TM) perforations, primarily induced by middle ear infections, the introduction of foreign objects into the ear, and acoustic trauma, lead to hearing abnormalities and ear infections. We describe the design and fabrication of a novel composite patch containing photocrosslinkable gelatin methacryloyl (GelMA) and keratin methacryloyl (KerMA) hydrogels. GelMA-KerMA patches containing conical microneedles in their design were developed using the digital light processing (DLP) 3D printing approach. Following this, the patches were biofunctionalized by applying a coaxial coating with PVA nanoparticles loaded with gentamicin (GEN) and fibroblast growth factor (FGF-2) with the Electrohydrodynamic Atomization (EHDA) method. The developed nanoparticle-coated 3D-printed patches were evaluated in terms of their chemical, morphological, mechanical, swelling, and degradation behavior. In addition, the GEN and FGF-2 release profiles, antimicrobial properties, and biocompatibility of the patches were examined in vitro. The morphological assessment verified the successful fabrication and nanoparticle coating of the 3D-printed GelMA-KerMA patches. The outcomes of antibacterial tests demonstrated that GEN@PVA/GelMA-KerMA patches exhibited substantial antibacterial efficacy against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. Furthermore, cell culture studies revealed that GelMA-KerMA patches were biocompatible with human adipose-derived mesenchymal stem cells (hADMSC) and supported cell attachment and proliferation without any cytotoxicity. These findings indicated that biofunctional 3D-printed GelMA-KerMA patches have the potential to be a promising therapeutic approach for addressing TM perforations.

Collagen Matrix to Restore the Tympanic Membrane: Developing a Novel Platform to Treat Perforations

Modern otology faces challenges in treating tympanic membrane (TM) perforations. Instead of surgical intervention, alternative treatments using biomaterials are emerging. Recently, we developed a robust collagen membrane using semipermeable barrier-assisted electrophoretic deposition (SBA-EPD). In this study, a collagen graft shaped like a sponge through SBA-EPD was used to treat acute and chronic TM perforations in a chinchilla model. A total of 24 ears from 12 adult male chinchillas were used in the study. They were organized into four groups. The first two groups had acute TM perforations and the last two had chronic TM perforations. We used the first and third groups as controls, meaning they did not receive the implant treatment. The second and fourth groups, however, were treated with the collagen graft implant. Otoscopic assessments were conducted on days 14 and 35, with histological evaluations and TM vibrational studies performed on day 35. The groups treated with the collagen graft showed fewer inflammatory changes, improved structural recovery, and nearly normal TM vibrational properties compared to the controls. The porous collagen scaffold successfully enhanced TM regeneration, showing high biocompatibility and biodegradation potential. These findings could pave the way for clinical trials and present a new approach for treating TM perforations.

Symmetrically dotted tympanic membranes

Key Clinical Message

Color changes of the tympanic membranes without an inflammatory component or perforation are rarely described. They may result from hemorrhage after barotrauma or spontaneously. Other explanatory models include discoloration due to otomycosis.

Abstract

This is a case of a 61-year-old patient with an unexplained incidental of black dots located almost symmetrically on the antero-inferior quadrant of both tympanic membranes. This harmless anatomical rarity has not been published before. Underlying pathologies should be excluded in the case of discoloration of the tympanic membranes.

Finite element modelling of sound transmission in the Weberian apparatus of zebrafish (Danio rerio)

Zebrafish, an essential vertebrate model, has greatly expanded our understanding of hearing. However, one area that remains unexplored is the biomechanics of the Weberian apparatus, crucial for sound conduction and perception. Using micro-computed tomography (μCT) bioimaging, we created three-dimensional finite element models of the zebrafish Weberian ossicles. These models ranged from the exact size to scaled isometric versions with constrained geometry (1 to 10 mm in ossicular chain length). Harmonic finite element analysis of all 11 models revealed that the resonance frequency of the zebrafish's Weberian ossicular chain is approximately 900 Hz, matching their optimal hearing range. Interestingly, resonance frequency negatively correlated with size, while the ratio of peak displacement and difference of resonance frequency between tripus and scaphium remained constant. This suggests the transmission efficiency of the ossicular chain and the homogeneity of resonance frequency at both ends of the chain are not size-dependent. We conclude that the Weberian apparatus's resonance frequency can explain zebrafish's best hearing frequency, and their biomechanical characteristics are not influenced by isometric ontogeny. As the first biomechanical modelling of atympanic ear and among the few non-human ear modelling, this study provides a methodological framework for further investigations into hearing mechanisms and the hearing evolution of vertebrates.

In vivo microstructural investigation of the human tympanic membrane by endoscopic polarization-sensitive optical coherence tomography

SIGNIFICANCE

Endoscopic optical coherence tomography (OCT) is of growing interest for in vivo diagnostics of the tympanic membrane (TM) and the middle ear but generally lacks a tissue-specific contrast.

AIM

To assess the collagen fiber layer within the in vivo TM, an endoscopic imaging method utilizing the polarization changes induced by the birefringent connective tissue was developed.

APPROACH

An endoscopic swept-source OCT setup was redesigned and extended by a polarization-diverse balanced detection unit. Polarization-sensitive OCT (PS-OCT) data were visualized by a differential Stokes-based processing and the derived local retardation. The left and right ears of a healthy volunteer were examined.

RESULTS

Distinct retardation signals in the annulus region of the TM and near the umbo revealed the layered structure of the TM. Due to the TM's conical shape and orientation in the ear canal, high incident angles onto the TM's surface, and low thicknesses compared to the axial resolution limit of the system, other regions of the TM were more difficult to evaluate.

CONCLUSIONS

The use of endoscopic PS-OCT is feasible to differentiate birefringent and nonbirefringent tissue of the human TM in vivo. Further investigations on healthy as well as pathologically altered TMs are required to validate the diagnostic potential of this technique.

Evaluation on the possibility of sound conduction independent of tympanic air cavity for severe tympanic adhesion patients by finite element analysis

Background: For patients with severe tympanic adhesion, reconstructing the tympanic air cavity is often challenging, resulting in poor hearing reconstruction outcomes. Therefore, establishing a sound conduction pathway independent of the tympanic air cavity may be a viable method for reconstructing hearing in these patients. Purpose: The objective of this study was to evaluate the feasibility of sound conduction independent of the tympanic air cavity (i.e., replacing the original cavity with a tympanic vibrating material) using finite element analysis. Methods: We established a sound-structure coupling finite element model of the tympanum vibration conduction system, which included the tympanic membrane (TM), ossicular prosthesis, and tympanic vibrating material. This model was used to simulate middle ear vibrations under sound pressure, and we extracted the frequency response curve of the ossicular prosthesis' vibration displacement amplitude to evaluate the sound conduction effect of the middle ear. Next, we adjusted the structural and mechanical parameters of the tympanic vibrating material to analyze its impact on the sound conduction effect of the middle ear. Finally, we compared the frequency response curve of the stapes footplate in normal subjects to evaluate the feasibility of sound conduction independent of the tympanic air cavity. Results: The Shell tympanic vibrating material had a better vibration conduction effect compared to solid or porous tympanic vibrating material. The vibration amplitude decreases with the increasing elastic modulus of the tympanic vibrating material. Implantation of 40 kPa-shell tympanic vibrating material had the lowest hearing loss less than 5 dB, and the hearing loss with 1 MPa-porous tympanic vibrating material was largest and less than 25 dB. Conclusion: Our study suggests that replacing the tympanic air cavity with a tympanic vibrating material is feasible. The establishment of a sound conduction pathway independent of the tympanic air cavity could potentially provide a method for hearing reconstruction in patients with severe tympanic adhesion.

Multimodal additive manufacturing of biomimetic tympanic membrane replacements with near tissue-like acousto-mechanical and biological properties

The three additive manufacturing techniques fused deposition modeling, gel plotting and melt electrowriting were combined to develop a mimicry of the tympanic membrane (TM) to tackle large TM perforations caused by chronic otitis media. The mimicry of the collagen fiber orientation of the TM was accompanied by a study of multiple funnel-shaped mimics of the TM morphology, resulting in mechanical and acoustic properties similar to those of the eardrum. For the different 3D printing techniques used, the process parameters were optimized to allow reasonable microfiber arrangements within the melt electrowriting setup. Interestingly, the fiber pattern was less important for the acousto-mechanical properties than the overall morphology. Furthermore, the behavior of keratinocytes and fibroblasts is crucial for the repair of the TM, and an in vitro study showed a high biocompatibility of both primary cell types while mimicking the respective cell layers of the TM. A simulation of the in vivo ingrowth of both cell types resulted in a cell growth orientation similar to the original collagen fiber orientation of the TM. Overall, the combined approach showed all the necessary parameters to support the growth of a neo-epithelial layer with a similar structure and morphology to the original membrane. It therefore offers a suitable alternative to autologous materials for the treatment of chronic otitis media. STATEMENT OF SIGNIFICANCE: Millions of people worldwide suffer from chronic middle ear infections. Although the tympanic membrane (TM) can be reconstructed with autologous materials, the grafts used for this purpose require extensive manual preparation during surgery. This affects not only the hearing ability but also the stability of the reconstructed TM, especially in the case of full TM reconstruction. The synthetic alternative presented here mimicked not only the fibrous structure of the TM but also its morphology, resulting in similar acousto-mechanical properties. Furthermore, its high biocompatibility supported the migration of keratinocytes and fibroblasts to form a neo-epithelial layer. Overall, this completely new TM replacement was achieved by combining three different additive manufacturing processes.

Relative importance and interactions of parameters of finite-element models of human middle ear

In the last decades, finite-element models of the middle ear have been widely used to predict the middle-ear vibration outputs. Even with the simplest linear assumption for material properties of the structures in the middle ear, these models need tens of parameters. Due to the complexities of measurements of material properties of these structures, accurate estimations of the values of most of these parameters are not possible. In this study, we benefited from the stochastic finite-element model of the middle ear we had developed in the past, to perform global sensitivity analysis. For this aim, we implemented Sobol' sensitivity analysis which ranks the importance of all uncertain parameters and interactions among them at different frequencies. To decrease the computational costs, we found Sobol' indices from surrogate models that we created using stochastic finite-element results and the polynomial chaos expansion method. Based on the results, the Young's modulus and thickness of the tympanic membrane, Young's modulus and damping of the stapedial annular ligaments, and the Young's modulus of ossicles are among the parameters with the greatest impacts on vibrations of the umbo and stapes footplate. Furthermore, the most significant interactions happen between the Young's modulus and thickness of the tympanic membrane.

Chitin nanofibrils modulate mechanical response in tympanic membrane replacements

The tympanic membrane (TM), is a thin tissue lying at the intersection of the outer and the middle ear. TM perforations caused by traumas and infections often result in a conductive hearing loss. Tissue engineering has emerged as a promising approach for reconstructing the damaged TM by replicating the native material characteristics. In this regard, chitin nanofibrils (CN), a polysaccharide-derived nanomaterial, is known to exhibit excellent biocompatibility, immunomodulation and antimicrobial activity, thereby imparting essential qualities for an optimal TM regeneration. This work investigates the application of CN as a nanofiller for poly(ethylene oxide terephthalate)/poly(butylene terephthalate) (PEOT/PBT) copolymer to manufacture clinically suitable TM scaffolds using electrospinning and fused deposition modelling. The inclusion of CN within the PEOT/PBT matrix showed a three-fold reduction in the corresponding electrospun fiber diameters and demonstrated a significant improvement in the mechanical properties required for TM repair. Furthermore, in vitro biodegradation assay highlighted a favorable influence of CN in accelerating the scaffold degradation over a period of one year. Finally, the oto- and cytocompatibility response of the nanocomposite substrates corroborated their biological relevance for the reconstruction of perforated eardrums.

Finite-Element Modelling Based on Optical Coherence Tomography and Corresponding X-ray MicroCT Data for Three Human Middle Ears

PURPOSE

Optical coherence tomography (OCT) is an emerging imaging modality which is non-invasive, can be employed in vivo, and can record both anatomy and vibrations. The purpose here is to explore the application of finite-element (FE) modelling to OCT data.

METHODS

We recorded vibrations for three human cadaver middle ears using OCT. We also have X-ray microCT images from the same ears. Three FE models were built based on geometries obtained from the microCT images. The material properties and boundary conditions of the models were obtained from previously reported studies.

RESULTS

Tympanic-membrane (TM) vibration patterns were computed for the three models and compared with the patterns measured using OCT. Frequency responses were also computed for all three models for several locations in the middle ear and compared with the OCT displacements and with the literature. The three models were compared with each other in terms of geometry and function. Parameter sensitivity analyses were done and the results were compared among the models and with the literature. The simulated TM displacement patterns are qualitatively similar to the OCT results. The simulated displacements are closer to the OCT results for 500 Hz and 1 kHz but the differences are greater at 2 kHz.

CONCLUSION

This study provides an initial look at the combined use of OCT measurements and FE modelling based on subject-specific anatomy. The geometries and parameters of the existing FE models could be modified for individual patients in the future to help identify abnormalities in the middle ear.

Inaccuracies of deterministic finite-element models of human middle ear revealed by stochastic modelling

For over 40 years, finite-element models of the mechanics of the middle ear have been mostly deterministic in nature. Deterministic models do not take into account the effects of inter-individual variabilities on middle-ear parameters. We present a stochastic finite-element model of the human middle ear that uses variability in the model parameters to investigate the uncertainty in the model outputs (umbo, stapes, and tympanic-membrane displacements). We demonstrate: (1) uncertainties in the model parameters can be magnified by more than three times in the umbo and stapes footplate responses at frequencies above 2 kHz; (2) middle-ear models are biased and they distort the output distributions; and (3) with increased frequency, the highly-uncertain regions spatially spread out on the tympanic membrane surface. Our results assert that we should be mindful when using deterministic finite-element middle-ear models for critical tasks such as novel device developments and diagnosis.

Finite element analysis of conductive hearing loss caused by fixation and detachment of ligament and tendon in the middle ear

BACKGROUND AND OBJECTIVE

The fixation of ligament and tendon of the middle ear often occurs after chronic otitis media surgery. However, there are relatively few studies on the effect of ligament and tendon on sound transmission in the human middle ear. Here, the finite element model and lumped parameter model are used to study the effect of ligament and tendon fixation and detachment on sound transmission in human ear.

METHODS

In this paper, the finite element model including the external auditory canal, middle ear and simplified inner ear is used to calculate and compare the middle ear frequency response of the normal and tympanosclerosis under pure tone stimulation. In addition, the lumped parametric model is taken into account to illustrate the effect of ligament and tendon stiffness on the human ear transmission system.

RESULTS

The results indicate that the motion of the tympanic membrane and stapes is reduced by ligament and tendon fixation. Although ligament and tendon detachment have a limited effect in the piston-motion direction, the stability of motion in the plane perpendicular to the piston-motion direction is significantly reduced. Most significantly, the ligament and tendon fixation cause a hearing effect of about 18 dB, which is greater in the plane perpendicular to the piston-motion direction after ligament and tendon detachment than in the piston-motion direction.

CONCLUSIONS

In this study, the calculation accuracy of the lumped parameter and the finite element model is studied, and the effect of ligament and tendon on hearing loss is further explored through the finite element model with high calculation accuracy, which is helpful to understand the role of ligament and tendon in the sound transmission mechanism of the human middle ear. The study of ligament and tendon on conductive hearing loss provides a reference for clinical treatment of tympanosclerosis.

Numerical model characterization of the sound transmission mechanism in the tympanic membrane from a high-speed digital holographic experiment in transient regime

A methodology for the development of a finite element numerical model of the tympanic membrane (TM) based on experiments carried out in the time domain on a cadaveric human temporal bone is presented. Using a high-speed digital holographic (HDH) system, acoustically-induced transient displacements of the TM surface are obtained. The procedure is capable to generate and validate the finite element model of the TM by numerical and experimental data correlation. Reverse engineering approach is used to identify key material parameters that define the mechanical response of the TM. Finally, modal numerical simulations of the specimen are performed. Results show the feasibility of the methodology to obtain an accurate model of a specific specimen and to help interpret its behaviour with additional numerical simulations. STATEMENT OF SIGNIFICANCE: Improving knowledge of the dynamic behavior of the tympanic membrane is key to understanding the sound transmission system in human hearing and advance in the treatment of its pathologies. Recently we acquired a new tool to carry out experiments in transient regime by means of digital laser holography, capable of providing a large amount of information in a controlled transient test. In this work, these data are used to develop a methodology that generates a numerical model of the tympanic membrane based on numerical-experimental correlations. It is important to be able to develop models that fit specific patients. In this work, additional modal simulations are also presented that, in addition to validating the results, provide more information on the specimen.

Characterization of middle ear soft tissue damping and its role in sound transmission

Damping plays an important role in the middle ear (ME) sound transmission system. However, how to mechanically characterize the damping of ME soft tissues and the role of damping in ME sound transmission have not yet reached a consensus. In this paper, a finite element (FE) model of the partial external and ME of the human ear, considering both Rayleigh damping and viscoelastic damping for different soft tissues, is developed to quantitatively investigate the damping in soft tissues effects on the wide-frequency response of the ME sound transmission system. The model-derived results can capture the high-frequency (above 2 kHz) fluctuations and obtain the 0.9 kHz resonant frequency (RF) of the stapes velocity transfer function (SVTF) response. The results show that the damping of pars tensa (PT), stapedial annular ligament (SAL) and incudostapedial joints (ISJ) can help smooth the broadband response of the umbo and stapes footplate (SFP). It is found that, between 1 and 8 kHz, the damping of the PT increases the magnitude and phase delay of the SVTF above 2 kHz while the damping of the ISJ can avoid excessive phase delay of the SVTF, which is important in maintaining the synchronization in high-frequency vibration but has not been revealed before. Below 1 kHz, the damping of the SAL plays a more important role, and it can decrease the magnitude but increases the phase delay of the SVTF. This study has implications for a better understanding of the mechanism of ME sound transmission.

Finite element modelling of the human middle ear using synchrotron-radiation phase-contrast imaging

Finite element (FE) models of the middle ear often lack accurate geometry of soft tissue structures, such as the suspensory ligaments, as they can be difficult to discern using conventional imaging modalities, such as computed tomography. Synchrotron-radiation phase-contrast imaging (SR-PCI) is a non-destructive imaging modality that has been shown to produce excellent visualization of soft tissue structures without the need for extensive sample preparation. The objectives of the investigation were to firstly use SR-PCI to create and evaluate a biomechanical FE model of the human middle ear that includes all soft tissue structures, and secondly, to investigate how modelling assumptions and simplifications of ligament representations affect the simulated biomechanical response of the FE model. The FE model included the suspensory ligaments, ossicular chain, tympanic membrane, the incudostapedial and incudomalleal joints, and the ear canal. Frequency responses obtained from the SR-PCI-based FE model agreed well with published laser doppler vibrometer measurements on cadaveric samples. Revised models with exclusion of the superior malleal ligament (SML), simplification of the SML, and modification of the stapedial annular ligament were studied, as these revised models represented modelling assumptions that have been made in literature.

Rabbit tympanic membrane thickness distribution obtained via optical coherence tomography

Knowing the precise tympanic membrane (TM) thickness variation is crucial in understanding the functional properties of the TM and has a significant effect on the accuracy of computational models. Using optical coherence tomography, we imaged five left and five right TMs of domestic New Zealand rabbits. From these data, ten thickness distribution maps were computed. Although inter-specimen variability is present, similar features could be observed in all samples: The rabbit TM is thickest around the umbo, with values of 150 ± 32 µm. From the umbo towards the TM annulus, the thickness gradually decreases down to 38 ± 7 µm around the midway location, but increases up to 54 ± 19 µm at the TM annulus. The thickness values at the umbo are comparable to literature data for humans, but the rabbit TM is thinner at the TM annulus and in-between the umbo and annulus. Moreover, the rabbit TM thickness distribution is highly symmetrical, which is not the case for the human TM. The results improve our general understanding of TM structure in rabbits and may improve numerical models of TM dynamical behavior.

Enhancement of Trans-Tympanic Drug Delivery by Pharmacological Induction of Inflammation

Drug delivery directly across the tympanic membrane (TM) could eliminate systemic exposure to antibiotics prescribed for otitis media, the most common reason for pediatricians to prescribe antibiotics. Here, we hypothesized that inducing inflammation of the TM could enhance drug flux across the TM. We demonstrated that the flux of ciprofloxacin across the TM was greatly increased by treatment with the proinflammatory agent histamine. That enhancement was blocked by concurrent treatment with blockers of histamine receptor 1. Treatment of the TM with histamine was able to enhance drug flux sufficiently to eradicate otitis media in vivo in chinchillas, but only if the histamine was applied prior to treatment with antibiotics.

Interfacing Perforated Eardrums with Graphene-Based Membranes for Broadband Hearing Recovery

Eardrum perforation and associated hearing loss is a global health problem. Grafting perforated eardrum with autologous tissues in clinic can restore low-frequency hearing but often leaves poor recovery of high-frequency hearing. In this study, the potential of incorporating a thin multilayered graphene membrane (MGM) into the eardrum for broadband hearing recovery in rats is examined. The MGM shows good biocompatibility and biostability to promote the growth of eardrum cells in a regulated manner with little sign of tissue rejection and inflammatory response. After three weeks of implantation, the MGM is found to be encapsulated by a thin layer of newly grown tissue on both sides without a significant folded overgrowth that is often seen in natural healing. The perforation is well sealed, and broadband hearing recovery (1-32 kHz) is enabled and maintained for at least 2 months. Mechanical simulations show that the high elastic modulus of MGM and thin thickness of the reconstructed eardrum play a critical role in the recovery of high-frequency hearing. This work demonstrates the promise of the use of MGM as a functional graft for perforated eardrum to recover hearing in the broadband frequency region and suggests a new acoustics-related medical application for graphene-related 2D materials.

Combined analysis of finite element model and audiometry provides insights into the pathogenesis of conductive hearing loss

The middle ear transmits sound to the inner ear via vibrations in the eardrum and ossicles, and damage to the middle ear results in conductive hearing loss. Although conductive hearing loss can be corrected by surgery, the currently available clinical investigations cannot always diagnose the ossicular chain pathology underlying the conductive hearing loss, and even intraoperative findings can be equivocal. Acoustic analysis using finite element models (FEMs) can simulate the sound pressure change at an arbitrary site for each frequency. FEMs are used in acoustic engineering to simulate the frequency-dependent sound pressure distribution at discrete cells in a simulated model and analyze the effects of specific parameters on the audiogram. However, few reports have compared the numerical results obtained using FEMs with data from clinical cases. We used FEMs to simulate audiograms of the air-bone gap (ABG) for various ossicular chain defects and compared these with preoperative audiograms obtained from 44 patients with a normal tympanic membrane who had otosclerosis, middle ear malformations or traumatic ossicular disruption. The simulated audiograms for otosclerosis and attic fixation of the malleus-incus complex both exhibited an up-slope but could be distinguished from each other based on the ABG at 1000 Hz. The simulated audiogram for incudostapedial joint discontinuity exhibited a peak at around 750 Hz and a down-slope above 1000 Hz. In general, the simulated audiograms for otosclerosis, attic fixation and incudostapedial joint discontinuity were consistent with those obtained from clinical cases. Additional simulations indicated that changes in ossicular mass had relatively small effects on ABG. Furthermore, analyses of combination pathologies suggested that the effects of one defect on ABG were added to those of the other defect. These FEM-based findings provide insights into the pathogenesis of conductive hearing loss due to otosclerosis, middle ear malformations and traumatic injury.

Multimodal Handheld Probe for Characterizing Otitis Media - Integrating Raman Spectroscopy and Optical Coherence Tomography

Otitis media (OM) is a common disease of the middle ear, affecting 80% of children before the age of three. The otoscope, a simple illuminated magnifier, is the standard clinical diagnostic tool to observe the middle ear. However, it has limited contrast to detect signs of infection, such as clearly identifying and characterizing middle ear fluid or biofilms that accumulate within the middle ear. Likewise, invasive sampling of every subject is not clinically indicated nor practical. Thus, collecting accurate noninvasive diagnostic factors is vital for clinicians to deliver a precise diagnosis and effective treatment regimen. To address this need, a combined benchtop Raman spectroscopy (RS) and optical coherence tomography (OCT) system was developed. Together, RS-OCT can non-invasively interrogate the structural and biochemical signatures of the middle ear under normal and infected conditions.In this paper, in vivo RS scans from pediatric clinical human subjects presenting with OM were evaluated in parallel with RS-OCT data of physiologically relevant in vitro ear models. Component-level characterization of a healthy tympanic membrane and malleus bone, as well as OM-related middle ear fluid, identified the optimal position within the ear for RS-OCT data collection. To address the design challenges in developing a system specific to clinical use, a prototype non-contact multimodal handheld probe was built and successfully tested in vitro. Design criteria have been developed to successfully address imaging constraints imposed by physiological characteristics of the ear and optical safety limits. Here, we present the pathway for translation of RS-OCT for non-invasive detection of OM.

Evaluation of acoustic changes in and the healing outcomes of rat eardrums with pars tensa and pars flaccida perforations

Objectives

To systematically explore the differences in acoustic changes and healing outcomes of tympanic membranes (TMs) with pars flaccida perforation (PFP) and pars tensa perforation (PTP).

Methods

We created PFPs and PTPs of various sizes in Sprague-Dawley rats, and evaluated TM umbo velocity and hearing function using laser Doppler vibrometry and auditory brainstem response (ABR) measurement before and immediately after perforation. Two weeks later, hearing was reevaluated and TMs were investigated by immunohistochemical staining.

Results

Small PFPs and PTPs did not significantly affect umbo velocity and hearing function. Large PFPs increased umbo velocity loss at low frequency (1.5 kHz) and elevated ABR thresholds within 1-2 kHz. Large PTP caused significant velocity loss at low frequencies from 1.5 to 3.5 kHz and threshold elevations at full frequencies (1-2 kHz). Two weeks after the perforation, the hearing function of rats with healed PFPs recovered completely. However, high-frequency hearing loss (16-32 kHz) persisted in rats with healed PTPs. Morphological staining revealed that no increase in the thickness and obvious increase in collagen I level of regenerated par flaccida; regenerated pars tensa exhibited obvious increase in thickness and increased collagen I, while the collagen II regeneration was limited with discontinuous and disordered structure in regenerated pars tensa.

Conclusion

The hearing loss caused by large PFP limits at low frequencies while large PTP can lead to hearing loss at wide range frequencies. PFP and PTP have different functional outcomes after spontaneous healing, which is determined by the discrepant structure reconstruction and collagen regeneration.

Development of electrospun, biomimetic tympanic membrane implants with tunable mechanical and oscillatory properties for myringoplasty

Most commonly, autologous grafts are used in tympanic membrane (TM) reconstruction. However, apart from the limited availability and the increased surgical risk, they cannot replicate the full functionality of the human TM properly. Hence, biomimetic synthetic TM implants have been developed in our project to overcome these drawbacks. These innovative TM implants are made from synthetic biopolymer polycaprolactone (PCL) and silk fibroin (SF) by electrospinning technology. Static and dynamic experiments have shown that the mechanical and oscillatory behavior of the TM implants can be tuned by adjusting the solution concentration, the SF and PCL mixing ratio and the electrospinning parameters. In addition, candidates for TM implants could have comparable acousto-mechanical properties to human TMs. Finally, these candidates were further validated in in vitro experiments by performing TM reconstruction in human cadaver temporal bones. The reconstructed TM with SF-PCL blend membranes fully recovered the acoustic vibration when the perforation was smaller than 50%. Furthermore, the handling, medium adhesion and transparency of the developed TM implants were similar to those of human TMs.

Multifaceted tannin crosslinked bioinspired dECM decorated nanofibers modulating cell-scaffold biointerface for tympanic membrane perforation bioengineering

Tympanic membrane (TM) perforation leads to persistent otitis media, conductive deafness, and affects life quality. Ointment medication may not be sufficient to treat TM perforation due to the lack of an underlying tissue matrix and thus requiring a scaffold-based application. The engineering of scaffold biointerface close to the matrix via tissue-specific decellularized extracellular matrix (dECM) is crucial in instructing cell behaviour and regulating cell-material interaction in the bioengineering domain. Herein, polycaprolactone (PCL) and TM-dECM (from SD rats) were combined in a different ratio in nanofibrous form using an electrospinning process and crosslinked via tannic acid. The histological and biochemical assays demonstrated that chemical and enzymatic decellularization steps removed cellular/immunogenic contents while retaining collagen and glycosaminoglycan. The morphological, physicochemical, thermomechanical, contact angle, and surface chemical studies demonstrated that the tannin crosslinked PCL/dECM nanofibers fine-tune biophysical and biochemical properties. The multifaceted crosslinked nanofibers hold the tunable distribution of dECM moieties, assembled into a spool-shaped membrane, and could easily insert into perforated sites. The dECM decorated fibers provide a preferable biomimetic matrix for L929 fibroblast adhesion, proliferation, matrix adsorption, and f-actin saturation, which could be crucial for bioengineering. Overall, dECM patterning, surface hydrophilicity, interconnected microporosities, and multifaceted nanofibrous biosystem modulate cell-scaffold performance and could open opportunities to reconstruct TM perforation in a biomimetic fashion.

A deep learning approach for detecting otitis media from wideband tympanometry measurements

OBJECTIVE

In this study, we propose an automatic diagnostic algorithm for detecting otitis media based on wideband tympanometry measurements.

METHODS

We develop a convolutional neural network for classification of otitis media based on the analysis of the wideband tympanogram. Saliency maps are computed to gain insight into the decision process of the convolutional neural network. Finally, we attempt to distinguish between otitis media with effusion and acute otitis media, a clinical subclassification important for the choice of treatment.

RESULTS

The approach shows high performance on the overall otitis media detection with an accuracy of 92.6%. However, the approach is not able to distinguish between specific types of otitis media.

CONCLUSION

Out approach can detect otitis media with high accuracy and the wideband tympanogram holds more diagnostic information than the commonly used techniques wideband absorbance measurements and simple tympanograms.

SIGNIFICANCE

This study shows how advanced deep learning methods enable automatic diagnosis of otitis media based on wideband tympanometry measurements, which could become a valuable diagnostic tool.

Statistical analysis of the human middle ear mechanical properties

Many experimental data on the human middle ear (ME) mechanics and dynamics can be found in the literature. Nevertheless, discussions about the uncertainties of these data are scarce. The present study compiles experimental data on the mechanical properties of the human ME. The summary statistics of mean and standard deviation of the data were collected and the coefficients of variation were computed and pooled. Moreover, the linear correlation and distribution were assessed for the ossicles' mass. Results show that, generally, the uncertainties of the stiffness properties of the tympanic membrane, ligaments, and tendons are larger than the uncertainties of the ossicles' mass. In addition, the uncertainties of the ME response vary across frequency. The vibration measures, such as the stapes' velocity normalized by the sound pressure at the tympanic membrane, are more uncertain than ME input impedance and reflectance. It is expected that the results presented in this study will provide the basis for the development of probabilistic models of the human ME.

Material Identification on Thin Shells Using the Virtual Fields Method, Demonstrated on the Human Eardrum

Characterization of material parameters from experimental data remains challenging, especially on biological structures. One of such techniques allowing for the inverse determination of material parameters from measurement data is the virtual fields method (VFM). However, application of the VFM on general structures of complicated shape has not yet been extensively investigated. In this paper, we extend the framework of the VFM method to thin curved solids in three-dimensional, commonly denoted shells. Our method is then used to estimate the Young's modulus and hysteretic damping of the human eardrum. By utilizing Kirchhoff plate theory, we assume that the behavior of the shell varies linearly through the thickness. The total strain of the shell can then be separated in a bending and membrane strain. This in turn allowed for an application of the VFM based only on data of the outer surface of the shell. We validated our method on simulated and experimental data of a human eardrum made to vibrate at certain frequencies. It was shown that the identified material properties were accurately determined based only on data from the outer surface and are in agreement with literature. Additionally, we observed that neither the bending nor the membrane strain in an human eardrum can be neglected and both contribute significantly to the total strain found experimentally.

Nanocarriers for Inner Ear Disease Therapy

Hearing loss is a common disease due to sensory loss caused by the diseases in the inner ear. The development of delivery systems for inner ear disease therapy is important to achieve high efficiency and reduce side effects. Currently, traditional drug delivery systems exhibit the potential to be used for inner ear disease therapy, but there are still some drawbacks. As nanotechnology is developing these years, one of the solutions is to develop nanoparticle-based delivery systems for inner ear disease therapy. Various nanoparticles, such as soft material and inorganic-based nanoparticles, have been designed, tested, and showed controlled delivery of drugs, improved targeting property to specific cells, and reduced systemic side effects. In this review, we summarized recent progress in nanocarriers for inner ear disease therapy. This review provides useful information on developing promising nanocarriers for the efficient treatment of inner ear diseases and for further clinical applications for inner ear disease therapy.

Prestrain in the rabbit eardrum measured by digital image correlation and micro-incisions

Prestrain in the absence of external loads can have an important effect on the vibrational behavior of mechanical systems such as the middle ear. Studies that measure tympanic membrane (TM) prestrain are scarce, however, and provide no conclusive answer on the existence and nature of the prestrain. In this study, prestrain is measured in the TM of cadaveric rabbit ears by stereo digital image correlation. To release the prestrain, straight incisions of 0.33 mm are made on different locations in the TM with a direction parallel to either the radial or circular fibers in the membrane. The effect of sample dehydration during different stages in the experimental procedure is assessed and eliminated by rehydrating the samples directly before each measurement. The measurements demonstrate average prestrain values around the incisions between 3.52±2.34% and 13.62±7.92% for the different locations, with a noise floor of 0.07%. No clear differences were found between the prestrain values obtained for radial and circular incisions. Observed local variations in TM prestrain could not be clearly related to specific locations on the TM. The results suggest that TM prestrain may need to be considered in future studies of middle-ear function if the findings can be confirmed in human ears.

High Resolution and Labeling Free Studying the 3D Microstructure of the Pars Tensa-Annulus Unit of Mice

Hearing loss is a serious illness affecting people’s normal life enormously. The acoustic properties of a tympanic membrane play an important role in hearing, and highly depend on its geometry, composition, microstructure and connection to the surrounding annulus. While the conical geometry of the tympanic membrane is critical to the sound propagation in the auditory system, it presents significant challenges to the study of the 3D microstructure of the tympanic membrane using traditional 2D imaging techniques. To date, most of our knowledge about the 3D microstructure and composition of tympanic membranes is built from 2D microscopic studies, which precludes an accurate understanding of the 3D microstructure, acoustic behaviors and biology of the tissue. Although the tympanic membrane has been reported to contain elastic fibers, the morphological characteristic of the elastic fibers and the spatial arrangement of the elastic fibers with the predominant collagen fibers have not been shown in images. We have developed a 3D imaging technique for the three-dimensional examination of the microstructure of the full thickness of the tympanic membranes in mice without requiring tissue dehydration and stain. We have also used this imaging technique to study the 3D arrangement of the collagen and elastic fibrillar network with the capillaries and cells in the pars tensa-annulus unit at a status close to the native. The most striking findings in the study are the discovery of the 3D form of the elastic and collagen network, and the close spatial relationships between the elastic fibers and the elongated fibroblasts in the tympanic membranes. The 3D imaging technique has enabled to show the 3D waveform contour of the collagen and elastic scaffold in the conical tympanic membrane. Given the close relationship among the acoustic properties, composition, 3D microstructure and geometry of tympanic membranes, the findings may advance the understanding of the structure—acoustic functionality of the tympanic membrane. The knowledge will also be very helpful in the development of advanced cellular therapeutic technologies and 3D printing techniques to restore damaged tympanic membranes to a status close to the native.

Drug Delivery across Barriers to the Middle and Inner Ear

The prevalence of ear disorders has spurred efforts to develop drug delivery systems to treat these conditions. Here, recent advances in drug delivery systems that access the ear through the tympanic membrane (TM) are reviewed. Such methods are either non-invasive (placed on the surface of the TM), or invasive (placed in the middle ear, ideally on the round window [RW]). The major hurdles to otic drug delivery are identified and highlighted the representative examples of drug delivery systems used for drug delivery across the TM to the middle and (crossing the RW also) inner ear.

Analyses of the Tympanic Membrane Impulse Response Measured with High-Speed Holography

The Tympanic Membrane (TM) transforms acoustic energy to ossicular vibration. The shape and the displacement of the TM play an important role in this process. We developed a High-speed Digital Holography (HDH) system to measure the shape and transient displacements of the TM induced by acoustic clicks. The displacements were further normalized by the measured shape to derive surface normal displacements at over 100,000 points on the TM surface. Frequency and impulse response analyses were performed at each TM point, which enable us to describe 2D surface maps of four new TM mechanical parameters. From frequency domain analyses, we describe the (i) dominant frequencies of the displacement per sound pressure based on Frequency Response Function (FRF) at each surface point. From time domain analyses, we describe the (ii) rising time, (iii) exponential decay time, and the (iv) root-mean-square (rms) displacement of the TM based on Impulse Response Function (IRF) at each surface point. The resultant 2D maps show that a majority of the TM surface has a dominant frequency of around 1.5 kHz. The rising times suggest that much of the TM surface is set into motion within 50 µs of an impulsive stimulus. The maps of the exponential decay time of the IRF illustrate spatial variations in damping, the least known TM mechanical property. The damping ratios at locations with varied dominant frequencies are quantified and compared.

Optical absorbance of the tympanic membrane in rat and human samples

Chronic infections are often connected to biofilm formation. In presence of implants, this can lead to loss of the implant. Systemic or local application of drugs is relatively ineffective in case of biofilm formation. One technique to provide antibacterial properties on demand is the antibacterial photodynamic therapy (aPDT). Using this technique, these properties can be “switched on” by light illumination. In the middle ear with the semitransparent tympanic membrane, it might be possible in future to activate the antibacterial effect without opening the membrane. Therefore, we investigated the optical absorbance spectra of the tympanic membrane. Optical absorbance spectra were measured in ex vivo preparations from neonatal and adult rats with the membrane still being attached to the surrounding bony ring and four human samples. After performing area scans, the spot with the lowest absorbance being surrounded by a ring like structure with higher absorbance was chosen as region of interest for scanning wavelengths between 300 and 900 nm. Absorbance is generally higher at lower wavelengths with a local absorbance maximum at 420 nm and a weak second maximum with two neighbouring peaks at 540 / 580 nm and is significantly higher in adult rats compared to neonatal rats where about 10% of light was transmitted. The human samples show similar characteristics with a little higher absorbance. For activation of aPDT through the tympanic membrane, larger wavelengths are more promising. Whether the amount of light transmitted through the membrane would be sufficient to induce aPDT remains to be tested in further experiments.

Cellulose-Based Fibrous Materials From Bacteria to Repair Tympanic Membrane Perforations

Perforation is the most common illness of the tympanic membrane (TM), which is commonly treated with surgical procedures. The success rate of the treatment could be improved by novel bioengineering approaches. In fact, a successful restoration of a damaged TM needs a supporting biomaterial or scaffold able to meet mechano-acoustic properties similar to those of the native TM, along with optimal biocompatibility. Traditionally, a large number of biological-based materials, including paper, silk, Gelfoam®, hyaluronic acid, collagen, and chitosan, have been used for TM repair. A novel biopolymer with promising features for tissue engineering applications is cellulose. It is a highly biocompatible, mechanically and chemically strong polysaccharide, abundant in the environment, with the ability to promote cellular growth and differentiation. Bacterial cellulose (BC), in particular, is produced by microorganisms as a nanofibrous three-dimensional structure of highly pure cellulose, which has thus become a popular graft material for wound healing due to a number of remarkable properties, such as water retention, elasticity, mechanical strength, thermal stability, and transparency. This review paper provides a comprehensive overview of the current experimental studies of BC, focusing on the application of BC patches in the treatment of TM perforations. In addition, computational approaches to model cellulose and TM are summarized, with the aim to synergize the available tools toward the best design and exploitation of BC patches and scaffolds for TM repair and regeneration.

Bioprinted collagen-based cell-laden scaffold with growth factors for tympanic membrane regeneration in chronic perforation model

With the recent development of bioprinting technology, various attempts have been made to replace bioprinting technologies and regenerative medicine are more directed towards transplantation/reconstructive surgeries only with the implantation of scaffolds. The purpose of this study is to determine whether the growth factors, human umbilical cord serum (hUCS) and bFGF (basic fibroblast growth factor), have a synergistic effect on eardrum regeneration, when used with a cell-printed scaffold in a chronic tympanic membrane perforation (TMP) model. In this study, in vitro cellular activities for bioprinted cell-laden collagen scaffolds using human adipose stem cells (hASCs) and supplemented with 10 μg/mL hUCS and 10 ng/mL bFGF were performed. The mixture of the growth factors in the cell-laden structures effectively affects various in vitro cellular responses including the proliferation of hASCs and the migration of keratinocytes due to the synergistic effect of the growth factors and hASCs. For the in vivo evaluation, a rat TMP model was used, and the TMP regeneration was assessed by otoscopic examination, hearing threshold measurement, and histologic examination. Although the cell-laden structure containing hUCS was more enhancing effect compared to the structure with bFGF, more synergistic effect in the structure using hUCS/bFGF was observed. Based on the results, we believe that the cell-laden structure incorporating hUCS and bFGF can induce significant regeneration of chronic tympanic membrane perforation.

Mimicking the Human Tympanic Membrane: The Significance of Scaffold Geometry

The human tympanic membrane (TM) captures sound waves from the environment and transforms them into mechanical motion. The successful transmission of these acoustic vibrations is attributed to the unique architecture of the TM. However, a limited knowledge is available on the contribution of its discrete anatomical features, which is important for fabricating functional TM replacements. This work synergizes theoretical and experimental approaches toward understanding the significance of geometry in tissue-engineered TM scaffolds. Three test designs along with a plain control are chosen to decouple some of the dominant structural elements, such as the radial and circumferential alignment of the collagen fibrils. In silico models suggest a geometrical dependency of their mechanical and acoustical responses, where the presence of radially aligned fibers is observed to have a more prominent effect compared to their circumferential counterparts. Following which, a hybrid fabrication strategy combining electrospinning and additive manufacturing has been optimized to manufacture biomimetic scaffolds within the dimensions of the native TM. The experimental characterizations conducted using macroindentation and laser Doppler vibrometry corroborate the computational findings. Finally, biological studies with human dermal fibroblasts and human mesenchymal stromal cells reveal a favorable influence of scaffold hierarchy on cellular alignment and subsequent collagen deposition.

Biomimetic Tympanic Membrane Replacement Made by Melt Electrowriting

The tympanic membrane (TM) transfers sound waves from the air into mechanical motion for the ossicular chain. This requires a high sensitivity to small dynamic pressure changes and resistance to large quasi-static pressure differences. The TM achieves this by providing a layered structure of about 100µm in thickness, a low flexural stiffness, and a high tensile strength. Chronically infected middle ears require reconstruction of a large area of the TM. However, current clinical treatment can cause a reduction in hearing. With the novel additive manufacturing technique of melt electrowriting (MEW), it is for the first time possible to fabricate highly organized and biodegradable membranes within the dimensions of the TM. Scaffold designs of various fiber composition are analyzed mechanically and acoustically. It can be demonstrated that by customizing fiber orientation, fiber diameter, and number of layers the desired properties of the TM can be met. An applied thin collagen layer seals the micropores of the MEW-printed membrane while keeping the favorable mechanical and acoustical characteristics. The determined properties are beneficial for implantation, closely match those of the human TM, and support the growth of a neo-epithelial layer. This proves the possibilities to create a biomimimetic TM replacement using MEW.

Necessities, opportunities, and challenges for tympanic membrane perforation scaffolding-based bioengineering

Tympanic membrane (TM) perforation is a global clinical dilemma. It occurs as a consequence of object penetration, blast trauma, barotrauma, and middle ear diseases. TM perforation may lead to otitis media, retraction pockets, cholesteatoma, and conductive deafness. Molecular therapies may not be suitable to treat perforation because there is no underlying tissue matrix to support epithelium bridging. Chronic perforations are usually reconstructed with autologous grafts via surgical myringoplasty. Surgical treatment is uncomfortable for the patients. The grafting materials are not perfect because they produce an opaque membrane, fail in up to 20% of cases, and are suboptimal to restore acoustic function. Millions of patients from developing parts of the world have not got access to surgical grafting due to operational complexities, lack of surgical resources, and high cost. These shortcomings emphasize bioengineering to improve placement options, healing rate, hearing outcomes, and minimize surgical procedures. This review highlights cellular, structural, pathophysiological, and perforation specific determinants that affect healing, acoustic and surgical outcomes; and integrates necessities relevant to bioengineered scaffolds. This study further summarizes scaffolding components, progress in scaffolding strategies and design, and engenders limitations and challenges for optimal bioengineering of chronic perforation.

Wavelength-specific optoacoustic-induced vibrations of the guinea pig tympanic membrane

SIGNIFICANCE

Optoacoustic-induced vibrations of the hearing organ can potentially be used for a hearing device. To increase the efficiency of such a hearing device, the conversion of the light energy into vibration energy within each type of irradiated tissue has to be optimized.

AIM

To analyze the wavelength-dependency of optoacoustic-induced vibrations within the tympanic membrane (TM), and to define the most efficient and best-suited optical stimulation parameters for a novel auditory prosthesis.

APPROACH

Single nanosecond laser pulses, continuously tunable in a range of visible to near-infrared, were used to excite the guinea pig TM. The induced vibrations of the hearing organ were recorded at the malleus using a laser Doppler vibrometer.

RESULTS

Our results indicate a strong wavelength-dependency of the vibration's amplitude correlating with the superposition of the absorption spectra of the different specific tissue components.

CONCLUSIONS

We investigated the spectrum of the vibrations of the hearing organ that were induced optoacoustically within a biological membrane embedded in air, in an animal model. First applications for these results can be envisioned for the optical stimulation of the peripheral hearing organ as well as for research purposes.

Can Tissue Engineering Bring Hope to the Development of Human Tympanic Membrane?

The tympanic membrane (TM), more commonly known as the eardrum, consists of a thin layer of tissue in the human ear that receives sound vibrations from outside of the body and transmits them to the auditory ossicles. The TM perforations (TMPs) are a common ontological condition, which in some cases can result in permanent hearing loss. Despite the spontaneous healing capacity of the TM to regenerate in the majority of cases of acute perforation, chronic perforations require surgical interventions. However, the disadvantages of the surgical procedure include infection, anesthetic risks, and high failure of graft patency. The tissue engineering strategy, which includes the applications of a three-dimensional (3D) scaffold, cells, and biomolecules or a combination of them for the closure of chronic perforation, has been considered as an emerging treatment. Using this approach, emerging products are currently under development to regenerate the TM structure and its properties. This research aimed to highlight the problems with the current methods of TMP treatment, and critically evaluate the tissue engineering approaches, which may overcome these drawbacks. The focus of this review is on recent literature to critically discuss the emerging advanced materials used as a 3D scaffold in the development of a TM with cellular engineering, biomolecules, cells, and the fabrications of the TM and its pathway to the clinical application. In this review, we discuss the properties of TM and the advantages and disadvantages of the current clinical products for repair and replacement of the TM. Furthermore, we provide an overview of the in vitro and preclinical studies of emerging products over the past 5 years. The results of recent preclinical studies suggest that the tissue engineering field holds significant promise.

Association Between the Air-Bone Gap and Vibration of the Tympanic Membrane After Myringoplasty

Air-bone gap (ABG) is an important indicator of hearing status after myringoplasty. A number of factors have been associated with ABG, but some patients still have ABG without identifiable cause. This study aimed to evaluate the relationship between tympanic membrane (TM) vibration using laser Doppler vibrometry (LDV) and ABG after myringoplasty. Between January 2013 and January 2015, 24 patients with ABG of unknown cause after myringoplasty were enrolled at the Beijing Tongren Hospital. Thirty normal controls were recruited from the hospital staff. All patients underwent primary overlay myringoplasty. Pre- and postoperative air conduction (AC) and bone-conduction (BC) thresholds, and ABG were measured. Umbo velocity transfer function (UVTF) for vibration of TM was measured with LDV. Air conduction thresholds were significantly reduced after myringoplasty (all P < .05), while BC thresholds were not significantly changed (all P > .05). ABG was significantly reduced after myringoplasty (all P < .05). Air-bone gap was correlated with UVTF at 1.0 kHz (r = -0.46; P = .024). For patients with UVTF >0.08 mm/s/Pa, ABG was correlated with UVTF (r = -0.56; P = .029). For post-myringoplasty ABG without readily observable causes, there was a significant relationship between ABG and TM vibration. These results provide new insights in the understanding of this relationship and may help explain ABG after myringoplasty when there are no clear contributing factors.

Dynamic Properties of Microresonators with the Bionic Structure of Tympanic Membrane

The structure of a microresonator will affect the vibration characteristics and the performance of the system. Inspired by the structural characteristics of the human tympanic membrane, this paper proposed a microresonator with the bionic structure of a tympanic membrane. The structure of a tympanic membrane was simplified to a regular shape with three structural parameters: diameter, height, and thickness. To imitate the tympanic membrane, the contour surface of the bionic structure was modeled based on the formula of transverse vibration mode of a circular thin plate. The geometric model of the bionic structure was established by using the three structural parameters and the contour surface equation. The dynamic properties of the bionic model were studied by the finite element method (FEM). We discuss the modal characteristics of the bionic structure and study the effect of structural parameters and scale on the dynamic properties. The advantages of the bionic structure were investigated by a comparison with circular plate microresonators. The results illustrate that the bionic structure can significantly improve the resonant frequency and have a much larger effective area of vibration displacement.

Structural stiffening in the human middle ear due to static pressure: Finite-element analysis of combined static and dynamic middle-ear behavior

The vibration response of the middle ear (ME) to sound changes when static pressure gradients are applied across the tympanic membrane (TM). To date, it has not been well understood which mechanisms lead to these changes in ME vibration response. In this study, a 3D finite-element model of the human ME was developed that simulates the sound-induced ME vibration response when positive and negative static pressures of up to 4 kPa are applied to the TM. Hyperelasticity of the soft-tissue components was considered to simulate large deformations under static pressure. Some ME components were treated as viscoelastic materials to capture the difference between their static and dynamic stiffness, which was needed to replicate both static and dynamic ME behavior. The change in dynamic stiffness with static preload was simulated by linearization of the hyperelastic constitutive model around the predeformed state. For the preloaded harmonic response, we found that the statically deformed ME geometry introduced asymmetry in the vibration loss between positive and negative pressure, which was due to the TM cone shape. As opposed to previous assumptions, the prestress in the ME due to static pressure had a substantial impact on the vibration response. We also found that material nonlinearity led to a higher stiffening at the umbo but a less pronounced stiffening at the footplate compared to the linear elastic condition. The results suggest that flexibility of the incudomalleolar joint (IMJ) enhances the decoupling of static umbo and footplate displacements, and that viscosity and viscoelasticity of the IMJ could play a role in the transfer of sound-induced vibrations from the umbo to the footplate. The components of the incudostapedial joint had minimal effect on ME mechanical behavior.

Mechanical Properties of Baboon Tympanic Membrane from Young to Adult

Mechanical properties of the tympanic membrane (TM) play an important role in sound transmission through the middle ear. While numerous studies have investigated the mechanical properties of the adult human TM, the effects of age on the TM's properties remain unclear because of the limited published data on the TM of young children. To address this deprivation, we used baboons in this study as an animal model for investigating the effect of age on the mechanical properties of the TM. Temporal bones were harvested from baboons (Papio anubis) of four different age groups: less than 1 year, 1-3 years, 3-5 years, and older than 5 years of age or adult. The TM specimens were harvested from baboon temporal bones and cut into rectangle strips along the inferior-superior direction, mainly capturing the influence of the circumferential direction fibers on the TM's mechanical properties. The elasticity, ultimate tensile strength, and relaxation behavior of the baboon TM were measured in each of the four age groups with a mechanical analyzer. The average effective Young's modulus of adult baboon TM was approximately 3.1 MPa, about two times higher than that of a human TM. The Young's moduli of the TM samples demonstrated a 26 % decrease from newborn to adult (from 4.2 to 3.1 MPa). The average ultimate tensile strength of the TMs for all the age groups was ~ 2.5 MPa. There was no significant change in the ultimate tensile strength and relaxation behavior among age groups. The preliminary results reported in this study provide a first step towards understanding the effect of age on the TM mechanical properties from young to adult.

Multiple angle digital holography for the shape measurement of the unpainted tympanic membrane

The shape of the tympanic membrane (TM) plays an important role in sound transmission through the ear for hearing. Previously we developed a high-speed holographic system employing a tunable wavelength laser for rapid TM shape measurement. However, the tunable laser illumination was not sufficient to measure the shape of the unpainted TM due to the semi-transparency of the TM and short exposure time of the camera. This paper presents a new multiple angle illumination technique that allows us to use a higher power single wavelength laser to perform shape measurements on the unpainted TM. Accuracy of the new method is demonstrated by a measure of a step gauge provided by the National Institute of Standards and Technology. We successfully applied the new shape measurement method on a fresh postmortem human TM without any paint.

Evaluating fidelity of CT based 3D models for Zebrafish conductive hearing system

The zebrafish Weberian apparatus is an emerging model for human conductive hearing system. Their Weberian apparatus comprises minute bones and ligamentary links, and conducts sound pressure transmission from the gas bladder to inner ear through four pairs of Weberian ossicles along the vertebral column. We herein present a methodological study using MicroCT to image the Weberian apparatus for biomechanical and morphological analysis. The aim of this work is to evaluate computational models generated from multiple MicroCT scans with different parameters, to identify the most feasible scan combination for practical (minimized scan time) yet accurate (relative to highest resolution) biomechanical simulations. We segmented and created 3D models from CT scan image stacks at 4.64 μm, 5.05 μm, 9.30 μm and 13.08 μm voxel resolutions, respectively. Then, we used geometric morphometrics analysis to quantify inter-model shape differences, as well as a series of finite element modal and harmonic analyses to simulate auditory signal vibrations. Relative to the highest resolution and most accurate model, the Model 9.30 is closest in overall geometry and biomechanical behavior of all lower resolution models. The differences in resolution and quality of the CT substantially affect the segmentation and reconstruction process of the three-dimensional model of the ossicles, and the subsequent analyses. We conclude that scan voxel resolution is a key factor influencing outcomes of biomechanical simulations of delicate and minute structures, especially when studying the harmonic response of minute ossicles connected by ligaments using finite element modeling. Furthermore, contrast variations in CT images as determined by x-ray power and scan speed, also affect fidelity in 3D models and simulation outcomes.