High quality biodiesel production from a microalga Chlorella protothecoides by heterotrophic growth in fermenters

Microalgal biorefineries in sustainable biofuel production and other high-value products

Microalgae has been emerging as a promising solution against the backdrop of the global need for sustainable, eco-friendly alternatives. This review article analyses the use of photosynthetic microalgae as an important resource for sustainable biofuel and high value bioproduct production, emphasizing the potential of self-sustaining microalgae biorefineries. A closed-loop, integrated multi-product producing microalgal biorefinery approach could significantly reduce the indicated negative environmental and energy impact from standalone microalgal biofuel generation. The economic feasibility of these biorefineries is linked to their recovery rate, improved by integrating various unit operations as well as multiple product dimensions under optimal conditions, enhancing resource recovery, process efficiency, and profitability. This approach ensures profitability and ubiquitous implementation of microalgal biorefineries, offering a sustainable solution to market demands. In conclusion, making microalgae biorefineries a major player in sustainable bioeconomy underscores the necessity of interdisciplinary research to surmount current challenges and completely realize their advantages.

The role of microalgal extracts and their combination with tamoxifen in the modulation of breast cancer immunotherapy (Review)

Cancer is one of the deadliest health menaces humans have ever witnessed. It is a leading cause of human mortality. Today, it remains a main leading cause of death globally primarily due to lifestyle changes and population ageing. A total of ~12.7 million cancer cases and 7.6 million cancer deaths were reported in 2008. In developing countries, cancer accounted for 56% of cases and 64% of deaths. Tamoxifen is the most reputable and recommended specific oestrogen receptor modulator drug used for the treatment of breast cancer. In the past decade, algae have demonstrated remarkable potency for advanced life applications. They can remain a focus of interest in the coming decades because they are one of the most diverse organisms in the entire ecosystem with immense bio nutritional benefits. Algae and their extracts play a pivotal role in the pharmaceutical industry as bioactive compounds and new drugs and nutraceutical industry as probiotics and antioxidants. However, a broad range of the health benefits of these organisms remains to be explored. The present review highlights the applications and co-application of microalgal crude extracts with tamoxifen for breast cancer immunotherapy. Given that recent studies have suggested that tamoxifen is an essential and primary treatment for breast cancer, the present review focused on the identification of a new treatment approach involving the co-application of tamoxifen and microalgal extracts to provide promising anticancer activity with few side effects on normal cells. The present review includes a general background and blueprint for the use of microalgal extracts as potential and affordable treatments or adjuncts for breast cancer management.

Microalgae to bioenergy production: Recent advances, influencing parameters, utilization of wastewater - A critical review

Fossil fuel limitations and their influence on climate change through atmospheric greenhouse gas emissions have made the excessive use of fossil fuels widely recognized as unsustainable. The high lipid content, carbon-neutral nature and potential as a biofuel source have made microalgae a subject of global study. Microalgae are a promising supply of biomass for third-generation biofuels production since they are renewable. They have the potential to produce significant amounts of biofuel and are considered a sustainable alternative to non-renewable energy sources. Microalgae are currently incapable to synthesize algal biofuel on an extensive basis in a sustainable manner, despite their significance in the global production of biofuels. Wastewater contains nutrients (both organic and inorganic) which is essential for the development of microalgae. Microalgae and wastewater can be combined to remediate waste effectively. Wastewater of various kinds such as industrial, agricultural, domestic, and municipal can be used as a substrate for microalgal growth. This process helps reduce carbon dioxide emissions and makes the production of biofuels more cost-effective. This critical review provides a detailed analysis of the utilization of wastewater as a growth medium for microalgal - biofuel production. The review also highlights potential future strategies to improve the commercial production of biofuels from microalgae.

Optimization of bio-oil extraction from Chlorella biomass via a green approach to obtain algal-based Di-ethyl phthalate

This study focuses on determining the optimum external operating parameters of algal cell lysis for extraction of bio-oil from Chlorella biomass. Response surface methodology has been applied to a regression analysis model for optimizing solvent ratios, i.e., ethyl acetate to ethanol (E.A.:E) ratio for maximum extraction of bio-oil and aqueous deep eutectic solvent to biomass (aDES:biomass) ratio for algal pretreatment for the enhanced yield of bio-oil. Optimized process conditions were 15 min of homogenization combined with ultrasonication (hybrid method). The aDES:biomass ratio of 8.25 caused the highest cell disruption efficiency to liberate bio-oil from encapsulated cells. The solvent ethyl acetate to ethanol ratio (E.A.:E) was optimum at 0.8 for maximum extraction of bio-oil, and studies indicated a maximum bio-oil yield of 94.0% using this hybrid pretreatment process combined with ultrasonication and homogenization. The GC-MS characterization technique was used to analyze the bio-oil, which showed it consisted of 67.93% Di-ethyl phthalate (DEP) and 32.07% esters compounds (C12-C40 hydrocarbons range). The produced DEP from Chlorella biomass using this sustainable green approach is very promising. The estimated cost was around Rs 49 per gm (equivalent to Rs 664.56 for 13.58 gm), which indicates the potential for a cost-effective method to produce pure DEP from Chlorella biomass.

Photosynthesizing carbonate/nitrate into Chlorococcum humicola biomass for biodiesel and Bacillus coagulans-based biohydrogen production

Biofuel can be generated by different organisms using various substrates. The green alga Chlorococcum humicola OQ934050 exhibited the capability to photosynthesize carbonate carbon, maybe via the activity of carbonic anhydrase enzymes. The optimum treatment is C:N ratio of 1:1 (0.2 mmoles sodium carbonate and 0.2 mmoles sodium nitrate) as it induced the highest dry mass (more than 0.5 mg.mL-1). At this combination, biomass were about 0.2 mg/mL-1 carbohydrates, 0.085 mg/mL-1 proteins, and 0.16 mg/mL-1 oil of this dry weight. The C/N ratios of 1:1 or 10:1 induced up to 30% of the Chlorococcum humicola dry mass as oils. Growth and dry matter content were hindered at 50:1 C/N and oil content was reduced as a result. The fatty acid profile was strongly altered by the applied C.N ratios. The defatted leftovers of the grown alga, after oil extraction, were fermented by a newly isolated heterotrophic bacterium, identified as Bacillus coagulans OQ053202, to evolve hydrogen content as gas. The highest cumulative hydrogen production and reducing sugar (70 ml H2/g biomass and 0.128 mg/ml; respectively) were found at the C/N ratio of 10:1 with the highest hydrogen evolution efficiency (HEE) of 22.8 ml H2/ mg reducing sugar. The optimum treatment applied to the Chlorococcum humicola is C:N ratio of 1:1 for the highest dry mass, up to 30% dry mass as oils. Some fatty acids were induced while others disappeared, depending on the C/N ratios. The highest cumulative hydrogen production and reducing sugar were found at the C/N ratio of 10:1.

Growth and Cell Size of Microalga Auxenochlorella protothecoides AS-1 under Different Trophic Modes

Certain microalgal species can grow with different trophic strategies depending on the availability of nutrient resources. They can use the energy from light or an organic substrate, or both, and can therefore be called autotrophs, heterotrophs, or mixotrophs. We recently isolated a microalgal strain from the microplastic biofilm, which was identified as Auxenochlorella protothecoides, AS-1. Strain AS-1 grew rapidly in bacterial culture media and exhibited different growth rates and cell sizes under different trophic conditions. We compared the growth performance of AS-1 under the three different trophic modes. AS-1 reached a high biomass (>4 g/L) in 6 days under mixotrophic growth conditions with a few organic carbons as a substrate. In contrast, poor autotrophic growth was observed for AS-1. Different cell sizes, including daughter and mother cells, were observed under the different growth modes. We applied a Coulter Counter to measure the size distribution patterns of AS-1 under different trophic modes. We showed that the cell size distribution of AS-1 was affected by different growth modes. Compared to the auto-, hetero- and mixotrophic modes, AS-1 achieved higher biomass productivity by increasing cell number and cell size in the presence of organic substrate. The mechanisms and advantages of having more mother cells with organic substrates are still unclear and warrant further investigations. The work here provides the growth information of a newly isolated A. protothecoides AS-1 which will be beneficial to future downstream applications.

A comprehensive review on effective parameters on microalgae productivity and carbon capture rate

Rising carbon emissions caused by population growth and industrialization is a significant environmental challenge in various countries. To combat this issue, Renewable Energy (RE) and Carbon Capture and Storage (CCS) technologies should be commercialized to reduce Greenhouse Gas (GHG) emissions and generate carbon-free energy. One such technology is the use of microalgae, which can directly capture CO2 from the air through photosynthesis and potentially produce biofuels due to their high energy content. However, the carbon capture rate of microalgae varies globally due to numerous parameters and variables affecting microalgae productivity. Additionally, microalgae productivity and carbon capture formulas yield different results worldwide, especially in outdoor industrial-scale cultivation. This research aims to comprehensively review the effective variables and parameters in carbon capture by microalgae based on microalgae productivity and carbon capture formulas. The research also ranked countries based on CO2 production in four different categories to determine whether the biggest carbon producer countries could exhibit suitable weather conditions for microalgae cultivation. Findings reveal optimal ranges of critical variables in the microalgae growth formula, including temperature, solar radiation intensity, Photon Flux Density (PFD), and sunlight duration. The study also analyzes microalgae cultivation, carbon capture, and oxygen production formula in different systems such as Open Ponds (OP), Tubular Photobioreactors (TPBR), and Flat Plate Photobioreactors (FPPBR), while discussing other influential parameters. In conclusion, emphasizing the adjustment and utilization of optimal values of effective parameters in microalgae cultivation not only holds promise for future carbon capture by microalgae but also pushes human beings toward sustainable development goals.

Removal efficiencies of seven frequently detected antibiotics and related physiological responses in three microalgae species

The main objective of this study is to investigate the effect of mixtures of seven widely used human antibiotics (ciprofloxacin, clarithromycin, erythromycin, metronidazole, ofloxacin, sulfamethoxazole, and trimethoprim) on the growth, pH, pigment production, and antibiotics removal of three microalgal species (Auxenochlorella protothecoides, Tetradesmus obliquus, and Chlamydomonas acidophila). Batch assays were conducted with media with antibiotic mixtures at 10, 50, and 100 μg L-1 for each antibiotic. The three microalgae species effectively removed the antibiotics without any growth inhibition, even when exposed to the highest antibiotic concentrations. Biosorption was reported as the primary mechanism for ciprofloxacin, clarithromycin, metronidazole, and ofloxacin, with up to 70% removal, especially in A. protothecoides and C. acidophila. A. protothecoides, a species never investigated for antibiotic removal, was the only microalgae exhibiting bioaccumulation and biodegradation of specific antibiotics, including sulfamethoxazole. Furthermore, in media with the highest antibiotic concentration, all three species exhibited increased chlorophyll (up to 37%) and carotenoid (up to 32%) production, accompanied by a pH decrease of 3 units. Generally, in the present study, it has been observed that physiological responses and the removal of antibiotics by microalgae are interlinked and contingent on the antibiotic levels and types.

Sugar cane bagasse hydrolysate (SBH) as a lucrative carbon supplement to upgrade the lipid and fatty acid production in Chlorococcum sp. for biodiesel through an optimized binary solvent system

Cost is the crucial impediment in commercializing microalgal biodiesel. Therefore, cultivating microalgae in cost-effective nutrients reduces the upstream process cost remarkably. Thus, in this study, sugar cane bagasse hydrolysate (SBH) as a lucrative carbon supplement for Chlorococcum sp. and subsequent lipid extraction via an optimized solvent system for biodiesel production was investigated. Characterization of SBH revealed the presence of various monosaccharides and other sugar derivatives such as glucose, fructose, xylose, arabinose, etc. The maximum dry cell weight of 1.7 g/L was estimated in cultures grown in 10 mL SBH. Different solvents such as diethyl ether (DEE), chloroform (CHL), ethyl acetate (ETA), hexane (HEX), methanol (MET), ethanol (ETOH), acetone (ACE) and also combination of solvents (2:1 ratio) such as DEE: MET, CHL: MET, HEX: MET, HEX: ETOH was tested for lipid extraction efficacy. Among solvents used, 12.3% and 18.4% of lipids were extracted using CHL and CHL: MET, respectively, from 10 mL SBH amended cultures. However, the biodiesel yield was found to be similar at about 70.16 % in both SBH and no SBH-added cultures. The fatty acid profile of the biodiesel shows palmitic, oleic, linoleic, linolenic, and arachidonic acid as principal fatty acids. Further, the levels of SFAs, MUFAs, and PUFAs in 10 mL SBH-added cells were 24.67, 12.89, and 34.24%, respectively. Eventually, the fuel properties of Chlorococcum sp. biodiesel, satisfying international biodiesel standards, make the biodiesel a viable diesel substitute in the future.

Use of micro and macroalgae extracts for the control of vector mosquitoes

Mosquitoes are one of the most dangerous vectors of human diseases such as malaria, dengue, chikungunya, and Zika virus. Controlling these vectors is a challenging responsibility for public health authorities worldwide. In recent years, the use of products derived from living organisms has emerged as a promising approach for mosquito control. Among these living organisms, algae are of great interest due to their larvicidal properties. Some algal species provide nutritious food for larvae, while others produce allelochemicals that are toxic to mosquito larvae. In this article, we reviewed the existing literature on the larvicidal potential of extracts of micro- and macroalgae, transgenic microalgae, and nanoparticles of algae on mosquitoes and their underlying mechanisms. The results of many publications show that the toxic effects of micro- and macroalgae on mosquitoes vary according to the type of extraction, solvents, mosquito species, exposure time, larval stage, and algal components. A few studies suggest that the components of algae that have toxic effects on mosquitoes show through synergistic interaction between components, inhibition of feeding, damage to gut membrane cells, and inhibition of digestive and detoxification enzymes. In conclusion, algae extracts, transgenic microalgae, and nanoparticles of algae have shown significant larvicidal activity against mosquitoes, making them potential candidates for the development of new mosquito control products.

Identification and Characterization of a Novel Microalgal Strain from the Antofagasta Coast Tetraselmis marina AC16-MESO (Chlorophyta) for Biotechnological Applications

The wide rocky coastline of the Antofagasta hosts an intertidal ecosystem in which the species that inhabit it are routinely exposed to a wide range of physical and chemical conditions and have therefore evolved to tolerate extremes. In the search for new species of potential biotechnological interest with adaptations to a wide range of environmental conditions, the isolation and characterization of microalgae from these ecosystems is of great interest. Here, a new microalgal strain, Tetraselmis marina AC16-MESO, is described, which was isolated from a biofilm collected on the intertidal rocks of the Antofagasta coast (23°36'57.2″ S, 70°23'33.8″ W). In addition to the morphological characterization, 18S and ITS sequence as well as ITS-2 secondary structure analysis revealed an identity of 99.76% and 100% with the species Tetraselmis marina, respectively. The analyses of the culture characteristics and biochemical content showed similarities with other strains that are frequently used in aquaculture, such as the species Tetraselmis suecica. In addition, it is tolerant of a wide range of salinities, thus allowing its culture in water of varying quality. On the other hand, added to these characteristics, the results of the improvement of the lipid content in stressful situations of salinity observed in this study, together with other antecedents such as the potential in bioremediation already published for this strain by the same research group, present a clear example of its biotechnological plasticity. It is noteworthy that this strain, due to its characteristics, allows easy collection of its biomass by decantation and, therefore, a more cost-efficient harvesting than for other microalgal strains. Therefore, this new strain of Tetraselmis marina, first report of this species in Chile, and its morphologically, molecularly and biochemically description, presents promising characteristics for its use in biotechnology and as feed for aquaculture.

A review on the sustainable procurement of microalgal biomass from wastewaters for the production of biofuels

The feasibility of microalgal biomass as one of the most promising and renewable sources for the production of biofuels is being studied extensively. Microalgal biomass can be cultivated under photoautotrophic, heterotrophic, photoheterotrophic, and mixotrophic cultivation conditions. Photoautotrophic cultivation is the most common way of microalgal biomass production. Under mixotrophic cultivation, microalgae can utilize both organic carbon and CO2 simultaneously. Mixotrophic cultivation depicts higher biomass productivity as compared to photoautotrophic cultivation. It is evident from the literature that mixotrophic cultivation yields higher quantities of polyunsaturated fatty acids as compared to that photoautotrophic cultivation. In this context, for economical biomass production, the organic carbon of industrial wastewaters can be valorized for the mixotrophic cultivation of microalgae. Following the way, contaminants' load of wastewaters can be reduced while concomitantly producing highly productive microalgal biomass. This review focuses on different aspects covering the sustainable cultivation of different microalgal species in different types of wastewaters.

Microalgae cultivation strategies using cost-effective nutrient sources: Recent updates and progress towards biofuel production

Scientists are grabbing huge attention as well as consciousness on non-renewable energy sources for the global energy crises because of gradual increase in oil price, fast depletion or low availability of resources, and the release of more toxic-gases (CO₂, SO_x, N_xO) during exhaustion, etc. Due to such hitches, the key need is to find alternative biofuels or feedstocks to replace fossil fuel energy demands worldwide. Currently, microalgae have become intrigued feedstock candidates (3rd generation source of biofuel) to replace nearly 50-60 % of fossil fuels due to high production of biomass and oil, mitigating CO₂ and wastewater remediation. The present work demonstrated the current developments and future perspectives on large-scale algal cultivation strategies for the biorefinery economy. In addition, various advanced cultivation techniques adopted for enhanced biomass production and cost-effective methods for bioenergy production were detailly discussed.

The Influence of Forward Osmosis Module Configuration on Nutrients Removal and Microalgae Harvesting in Osmotic Photobioreactor

Microalgae have attracted great interest recently due to their potential for nutrients removal from wastewater, renewable biodiesel production and bioactive compounds extraction. However, one major challenge in microalgal bioremediation and the algal biofuel process is the high energy cost of separating microalgae from water. Our previous studies demonstrated that forward osmosis (FO) is a promising technology for microalgae harvesting and dewatering due to its low energy consumption and easy fouling control. In the present study, two FO module configurations (side-stream and submerged) were integrated with microalgae (C. vulgaris) photobioreactor (PBR) in order to evaluate the system performance, including nutrients removal, algae harvesting efficiency and membrane fouling. After 7 days of operation, both systems showed effective nutrients removal. A total of 92.9%, 100% and 98.7% of PO₄-P, NH₃-N and TN were removed in the PBR integrated with the submerged FO module, and 82%, 96% and 94.8% of PO₄-P, NH₃-N and TN were removed in the PBR integrated with the side-stream FO module. The better nutrients removal efficiency is attributed to the greater algae biomass in the submerged FO-PBR where in situ biomass dewatering was conducted. The side-stream FO module showed more severe permeate flux loss and biomass loss (less dewatering efficiency) due to algae deposition onto the membrane. This is likely caused by the higher initial water flux associated with the side-stream FO configuration, resulting in more foulants being transported to the membrane surface. However, the side-stream FO module showed better fouling mitigation by simple hydraulic flushing than the submerged FO module, which is not convenient for conducting cleaning without interrupting the PBR operation. Taken together, our results suggest that side-stream FO configuration may provide a viable way to integrate with PBR for a microalgae-based treatment. The present work provides novel insights into the efficient operation of a FO-PBR for more sustainable wastewater treatment and effective microalgae harvesting.

Metabolic and Proteomic Analysis of Chlorella sorokiniana, Chloroidium saccharofilum, and Chlorella vulgaris Cells Cultured in Autotrophic, Photoheterotrophic, and Mixotrophic Cultivation Modes

Chlorella is one of the most well-known microalgal genera, currently comprising approximately a hundred species of single-celled green algae according to the AlgaeBase. Strains of the genus Chlorella have the ability to metabolize both inorganic and organic carbon sources in various trophic modes and synthesize valuable metabolites that are widely used in many industries. The aim of this work was to investigate the impact of three trophic modes on the growth parameters, productivities of individual cell components, and biochemical composition of Chlorella sorokiniana, Chloroidium saccharofilum, and Chlorella vulgaris cells with special consideration of protein profiles detected by SDS-PAGE gel electrophoresis and two-dimensional gel electrophoresis with MALDI-TOF/TOF MS. Mixotrophic conditions with the use of an agro-industrial by-product stimulated the growth of all Chlorella species, which was confirmed by the highest specific growth rates and the shortest biomass doubling times. The mixotrophic cultivation of all Chlorella species yielded a high amount of protein-rich biomass with reduced contents of chlorophyll a, chlorophyll b, carotenoids, and carbohydrates. Additionally, this work provides the first information about the proteome of Chloroidium saccharofilum, Chlorella sorokiniana, and Chlorella vulgaris cells cultured in molasses supplementation conditions. The proteomic analysis of the three Chlorella species growing photoheterotrophically and mixotrophically showed increased accumulation of proteins involved in the cell energy metabolism and carbon uptake, photosynthesis process, and protein synthesis, as well as proteins involved in intracellular movements and chaperone proteins.

Kinetic Study on Nannochloropsis Oculata's Lipid Extraction Using Supercritical CO2 and n-Hexane for Biodiesel Production

Biodiesel as a renewable fuel has attracted increasing attention in recent years. Microalgae biomass is becoming an attractive raw material for producing biodiesel using supercritical CO₂ (SC-CO₂) as a safe and environmentally friendly technique with high efficiency for lipid extraction. In this study, the lipid of Nannochloropsis oculata was extracted under different conditions of SC-CO₂ to assess the kinetics of supercritical fluid extraction. The effective parameters on lipid extraction, including temperature, pressure, and the existence of n-hexane as a co-solvent, were investigated. The results show that an increase in temperature at low or high pressures causes the kinetic constant of lipid extraction to decrease or increase, respectively. Also, an increase in pressure causes the kinetic constant of lipid extraction to increase at low or high temperatures. The most yield and the most kinetic constant value during extraction with pure CO₂ are about 0.262 [g extracted lipid/g microalgal biomass] and 0.062 min^-1, respectively, at the highest pressure and temperature (i.e., 550 bar and 75 °C). Using SC-CO₂ laced with n-hexane increases both the final yield and the rate of lipid extraction. Also, it improves the quality of the biodiesel fuel through the extraction of unsaturated fatty acids with a concentration of almost two times more than saturated fatty acids. Additionally, results reveal that the effect of adding n-hexane to CO₂ in lipid extraction would be more efficient by increasing the temperature and lowering the pressure.

The use of algae for environmental sustainability: trends and future prospects

Algae are photosynthetic prokaryotic or eukaryotic ubiquitously found group of organisms. Their enormous potentiality in coping up with various environmental crises has been well documented. Algae have proven to be ideal for biomonitoring of water pollution and help in removing the pollutants with their process of bioremediation apart from the production of eco-friendly sources of energy. Industries like food and pharmaceuticals are exploiting algae for producing several value-added products. The agricultural sector is also highly benefited from microalgae, as they are the good promoters of crop growth. The CO₂-removing potential of algae proves to be an asset in fighting climate change. Moreover, the relatively easy and inexpensive methods of sampling and culturing of algae make them more popular. In this paper, we review the sustainable application aspects of algae in various areas like pollution control, energy production, agriculture, and fighting climate change. Critical discussions have been made on the recent trends and advances of algal technologies indicating future prospects.

Using chlorella vulgaris for nutrient removal from hydroponic wastewater: experimental investigation and economic assessment

The study evaluated the use of Chlorella vulgaris for bioremediating hydroponic wastewater and producing biomass under different cultivation modes and to explore the economic implications of microalgal biofuels. Total nitrogen (TN) removal efficiency was 98.5% in mixotrophic conditions and 96% in heterotrophic conditions, and total phosphorus (TP) was completely removed (>99%) in both cultivation conditions. TN removal was higher for that which was cultivated under the mixotrophic mode of cultivation. The maximum biomass production (1.26 g/L) and biomass productivity (0.1108 g/L/day) were also reported for mixotrophic conditions. Lipid content was slightly higher for that which was cultivated under heterotrophic conditions: 33 wt% on an ash-free dry weight (AFDW) basis. The highest lipid production was obtained under mixotrophic growth (0.341 g/L). Higher net profit was obtained for both mixotrophic and heterotrophic cultivations: 30.6 million $/year for a plant capacity of 3.29 × 10⁴ tone/year and 30.12 million $/year for a plant capacity of 3.17 × 10⁴ tone/year respectively. Sensitivity analysis showed that biodiesel and nutritious supplements from soluble protein have the greatest impact on the process economics regarding mixotrophic cultivation, while biodiesel and feeds from insoluble protein have the largest effect on the process economics regarding heterotrophic and autotrophic cultivations.

Sanitary Ware Waste as a Source for a Valuable Biodiesel Catalyst

Biofuel is a type of fuel that is made from biomass using modern techniques rather than the relatively slow geological processes that lead to the development of fossil fuels. In Europe, biodiesel is the most widely used biofuel. The sanitary ware industry generates a lot of hazardous waste, such as waste gypsum molds. These molds are broken, pulverized, and reacted with NaCO3 to make CaCO3, which is then heated to produce CaO. The resulting CaO catalyzes the reaction between waste frying oil and methanol for biodiesel synthesis. To evaluate the effect of reaction parameters on the production of biodiesel, the independent reaction parameters that were chosen are as follows: reaction temperature in the range 50–70°C, methanol to oil (M:O) molar ratio in the range 9–15, catalyst loading in the range 1–5%, and time in the range 2–6 hrs. The influence of the independent factors on the reaction-dependent responses was evaluated and it was found that reaction temperature and methanol-to-oil ratio have a major effect on the biodiesel yield. Reaction condition optimization has been studied to maximize biodiesel yield at minimum reaction conditions. The optimum process conditions are 93.4% biodiesel yield at an M:O molar ratio of 15 : 1, catalyst loading of 1%, reaction temperature of 53.6°C, and reaction time of 2 h. The results showed that resulted biodiesel catalyst (CaO) can be used one time; then, a fresh catalyst will be used.

In-situ transesterification of single-cell oil for biodiesel production: a review

In recent years, biodiesel synthesis and production demands have increased because of its high degradability, cleaner emissions, non-toxicity, and an alternative to petroleum diesel. In this context, Single Cell Oil (SCO) has been identified as an alternative feedstock, having the advantage of accumulating high intracellular lipid. SCO/microbial lipids are potential alternatives for sustainable biodiesel production. The traditional technique for biodiesel production from the oils obtained from microbes generally requires two steps: lipid extraction and transesterification. In-situ transesterification is an innovative and renewable process for biodiesel production. It rules out the need to isolate and refine the feedstock lipid, as it directly uses biomass in a single step, i.e., the pretreated biomass will be subjected to in-situ transesterification in the presence of catalysts. Hence, the production cost can be reduced by eliminating the lipid extraction procedure. The current review focuses on the basic features and advantages of in-situ transesterification of SCO for biodiesel production with the aid of short-chain alcohols along with different acid, base, and enzyme catalysts. In addition, a comparative study was carried out to highlight the merits of in-situ transesterification over conventional transesterification.

Total Phenolic Levels, In Vitro Antioxidant Properties, and Fatty Acid Profile of Two Microalgae, Tetraselmis marina Strain IMA043 and Naviculoid Diatom Strain IMA053, Isolated from the North Adriatic Sea

This work studied the potential biotechnological applications of a naviculoid diatom (IMA053) and a green microalga (Tetraselmis marina IMA043) isolated from the North Adriatic Sea. Water, methanol, and dichloromethane (DCM) extracts were prepared from microalgae biomass and evaluated for total phenolic content (TPC) and in vitro antioxidant properties. Biomass was profiled for fatty acid methyl esters (FAME) composition. The DCM extracts had the highest levels of total phenolics, with values of 40.58 and 86.14 mg GAE/g dry weight (DW in IMA053 and IMA043, respectively). The DCM extracts had a higher radical scavenging activity (RSA) than the water and methanol ones, especially those from IMA043, with RSAs of 99.65% toward 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS) at 10 mg/mL, and of 103.43% against 2,2-diphenyl-1-picrylhydrazyl (DPPH) at 5 mg/mL. The DCM extract of IMA053 displayed relevant copper chelating properties (67.48% at 10 mg/mL), while the highest iron chelating activity was observed in the water extract of the same species (92.05% at 10 mg/mL). Both strains presented a high proportion of saturated (SFA) and monounsaturated (MUFA) fatty acids. The results suggested that these microalgae could be further explored as sources of natural antioxidants for the pharmaceutical and food industry and as feedstock for biofuel production.

Antioxidant and Antivenom Potential of an Essential Oil, 4-(2-Oxo-propyl)-cyclopentane-1,3-dione, and Allantoin Derived from the Polyherbal Combination of Aristolochia indica L. and Piper nigrum L

The goal of this study was to identify new compounds from a methanol extract of a polyherbal combination of Aristolochia indica L. and Piper nigrum L. (MECAIPN), two traditional medicinal plants used to cure envenomation, as well as to assess their antioxidant and antivenom properties. MECAIPN yielded EA1 (an essential oil), AA2 (4-(2-oxo-propyl)-cyclopentane-1,3-dione), and W3 ((2,5-dioxo-imidazolidin-4-yl)-urea) (Allantoin). Although EA1 had stronger radical scavenging activity, AA2 had higher DPPH and ferric ion radical scavenging activity, and W3 had higher molybdenum ion radical scavenging activity due to being a single molecule, the binding investigation revealed that EA1 has a greater Stern–Volmer quenching constant (Ksv) than AA2 and W3. Synchronous measurements indicated that EA1, AA2, and W3 bind to tryptophan and tyrosine residues in venom, causing denaturation of the secondary structure of the residue. Finally, the current study concludes that EA1 has more therapeutic antivenom potential, which could be related to the synergism of chemicals found in it. When it came to single compounds, AA2 had stronger antioxidant and antivenom capabilities than W3. To understand the mechanism of action and manufacture the green antivenom medication, more testing of the EA1 and compounds remains required.

Continuous Culture of Auxenochlorella protothecoides on Biodiesel Derived Glycerol under Mixotrophic and Heterotrophic Conditions: Growth Parameters and Biochemical Composition

As crude glycerol comprises a potential substrate for microalga fermentation and value added products’ biosynthesis, Auxenochlorella protothecoides was grown on it under heterotrophic and mixotrophic conditions and its growth kinetics were evaluated in a continuous system under steady state conditions. Increasing initial glycerol concentration (from 30 to 50 g/L) in the heterotrophic culture led to reduced biomass yield (Y_x/S) and productivity (P_x), but favored lipid accumulation. Under heterotrophic conditions, the microalga was found to grow better (biomass up to 7.888 g/L) and faster (higher growth rates), the system functioned more effectively (higher P_x) and crude glycerol was exploited more efficiently. Heterotrophy also favored proteins synthesis (up to 53%), lipids (up to 9.8%), and carbohydrates (up to 44.6%) accumulation. However, different trophic modes had no significant impact on the consistency of proteins and lipids. Oleic acid was the most abundant fatty acid detected (55–61.2% of the total lipids). The algal biomass contained many essential and non-essential amino acids, especially arginine, glutamic acid, lysine, aspartic acid, leucine, and alanine. In all the experimental trials, the protein contents in the microalgal biomass increased with the increasing dilution rate (D), with a concomitant decrease in the lipids and carbohydrates fractions.

Microwave-Assisted Extraction of Fatty Acids from Cultured and Commercial Phytoplankton Species

(1) Background: The extraction of fatty acids from microalgae and cyanobacteria is mostly performed with organic solvents and laborious procedures. Microwave-assisted extraction (MAE) can be a more effective and environmentally friendly process than traditional extraction (TE), which uses a large volume of solvent and conduction heating. Freshwater phytoplankton inhabits diverse aquatic environments and is a promising source of fatty acids and green precursors in the synthesis of biofuel, including cyanobacterial biomass. Therefore, the aim of this study was to investigate the potential of MAE to extract fatty acids from a Chlorella sp. microalga and two cyanobacteria, namely, Arthrospira sp. and Sphaerospermopsis torques-reginae, for biodiesel production. For this purpose, the lipid content and fatty acid profile of these strains were compared after treating biomass with the two extraction methods. (2) Methods: MAE and TE were used as extraction procedures; gas chromatography–mass spectrometry was used to assess the fatty acid profiles, and X-ray spectroscopy was used to analyze biomass. (3) Results: Although the fatty acid profile of the oil obtained by TE showed higher concentrations of fatty acids, the MAE method was able to extract more types of fatty acids. The variety of fatty acids extracted by the MAE, especially those with unsaturated chains, allowed for better quality biodiesel, presenting advantages over previous methods and studies. According to the analyses, essential fatty acids 16:0, 16:1, and 18:2 were found to be abundant in both cyanobacterial strains and in microalga, showing potential for biofuel production. Additionally, metal composition was determined as its content may indicate potential pro-oxidant influence in biofuel production. (4) Conclusions: MAE is a useful and green strategy to extract fatty acids from freshwater phytoplankton. Cyanobacteria can also be a beneficial source of fatty acids for biodiesel synthesis.

Heterogeneous Biodiesel Catalyst from Steel Slag Resulting from an Electric Arc Furnace

Biodiesel is one of the most environmentally friendly and renewable fuels, as it is a non-polluting fuel and is made from living resources, such as vegetable oils. The steel industry generates a variety of solid wastes, including electric arc furnace slag (EAFS). The synthesis of biodiesel from waste sunflower cooking oil was examined in this study, utilizing EAFS as a catalyst, which mainly contains ferric and ferrous oxides, calcium oxide, and silica. To evaluate their impact on biodiesel production, four independent variables were chosen: temperature (50–70 °C), catalyst loading (1–5%), methanol-to-oil (M:O) molar ratio (5–20), and time (1–4 h). The response surface methodology (RSM) was used to examine the impact of independent variables on reaction response, which is the biodiesel yield. This process was carried out using a design expert program by central composite design (CCD). A model was constructed, and showed that the biodiesel yield was directly proportional to all independent reaction parameters. The predicted model’s adequacy was investigated using analysis of variance (ANOVA), which showed that it is an excellent representative of the results. The optimization of reaction conditions was investigated in order to maximize biodiesel yield at minimal reaction temperature and time, achieving a 94% biodiesel yield at a 20:1 M:O molar ratio, 5% catalyst loading, 55.5 °C reaction temperature, and 1 h reaction time.

Utilization of the microalga Scenedesmus quadricauda for hexavalent chromium bioremediation and biodiesel production

The purpose of this study was to evaluate the bioremediation potential of the microalga Scenedesmus quadricauda in removing hexavalent chromium (Cr (VI)) from synthetic wastewater, under autotrophic and heterotrophic conditions and different inoculum concentrations. In both cultivation modes, the highest inoculum density of 0.8 g L^-1 led to the highest Cr (VI) removal efficiency. In addition, Cr (VI) stress was more severe in 10 ppm compared to 5 ppm, while heavy metal effects were alleviated under heterotrophic conditions. Concurrently, Cr (VI) stress affected biomass quality, resulting in an increase in lipid and carbohydrate production and decreased proteins. Furthermore, under higher Cr (VI) concentration more saturated and monounsaturated fatty acids were produced, while monounsaturated fatty acids content was also greater under heterotrophic conditions. In total, the findings of this study highlight the advantages of heterotrophic cultivation of microalgae for concomitant industrial wastewater treatment and biofuel production.

Comprehensive Techno-Economic Analysis of a Multi-Feedstock Biorefinery Plant in Oil-Rich Country: A Case Study of Iran

The high energy consumption in Iran, particularly in the transportation sector, has contaminated large cities and jeopardized the society health. Therefore, in this study technical and economic features of the production of biodiesel plant in Iran from various wastes are investigated. Based on the Analytic Hierarchy Process (AHP) method’s findings, the southern area of Iran is selected for establishing the biodiesel plant in Iran. The biorefinery, which includes three units of sewage sludge, edible waste oil and microalgae. The results of the economic evaluation show that the lowest costs of investment and production of biodiesel are related to microalgae units ($0.375/kg) and edible waste oil ($0.53/kg), respectively. Also, among all units, the lowest break even prices are related to biodiesel production ($1.17/kg) and the highest ATROR rate (29.16%) belongs to the microalgae unit. This indicates that this unit is more profitable than other units and the invested cost is returned to the investor in a shorter period of time (3.43 years). On the other hand, the results of sensitivity analysis show that the highest sensitivity of changes in the selling price of biodiesel and the cost of raw materials to ATROR to the microalgae and sludge unit. Therefore, the construction of a biorefinery in Iran has an economic justification.

Transcriptome and Metabolome Profiling of a Novel Isolate Chlorella sorokiniana G32 (Chlorophyta) Displaying Enhanced Starch Accumulation at High Growth Rate Under Mixotrophic Condition

Chlorella sorokiniana is one of the most productive microalgal species with a high potential for the production of biofuels and other high value-added molecules. Many studies have focused on its capability of mixotrophic growth using reduced organic carbon and growth pattern shift between autotrophic and mixotrophic conditions. In this study, we investigated growth patterns of a novel isolate, C. sorokiniana G32, under mixotrophic growth conditions supplemented with a low level (1.25 g L-1) and a high level (5 g L-1) of glucose. Physiological, transcriptomic (i.e., RNA-seq), and metabolomic (i.e., LC-MS/MS) methods were used. We showed that peak growth based on OD680nm absorbance is ∼4-fold higher with high glucose vs. low glucose supplementation. Photosynthetic efficiency (Fv/Fm) in G32 mixotrophic cultures with high or low glucose supplementation remains identical to that of G32 phototrophic growth. We also found that the conversion rate between absorbance-based cell density and cell dry weight with high glucose supplementation was lower than with low glucose. This suggests that more cell biomass is produced under high glucose treatment than with low glucose. The result was confirmed via sucrose density gradient centrifugation. It is likely that accumulation of high concentration of starch may account for this effect. Transcriptomic analysis of G32 cultures (i.e., via RNA-seq) in response to reciprocal change of glucose levels reveals that expression of a subset of differentially expressed genes (DEGs) is correlated with the amount of glucose supplementation. These DEGs are designated as glucose-specific responsive (GSR) genes. GSR genes are enriched for a number of energy metabolic pathways. Together with metabolomics data (i.e., LC-MS/MS), we show that under high-level supplementation, glucose is preferentially oxidized through an oxidative pentose phosphate pathway. Collectively, our results indicate the mechanism of regulation of glucose assimilation and energy metabolism in G32 under mixotrophic conditions with different levels of glucose supplementation revealed by transcriptomic and metabolomic analyses. We propose that C. sorokiniana G32 has the potential for the production of high value-added molecules.

Effect of Anaerobic Digestate on the Fatty Acid Profile and Biodiesel Properties of Chlorella sorokiniana Grown Heterotrophically

The growth kinetics and the lipid and protein content of the microalgal species Chlorella sorokiniana (CS) grown heterotrophically in growth media containing glycerol and increasing amounts of anaerobic digestate (AD) equal to 0%, 15%, 30%, and 50% was studied. The effect of the AD on the fatty acid (FA) distribution of the bio-oil extracted from the CS, as well as on the fatty acid methyl ester (FAME) properties such as the saponification number (SN), the iodine value (IV), the cetane number (CN), and the higher heating value (HHV) was also estimated. The percentage of AD in the growth medium affects the rate of carbon uptake. The maximum carbon uptake rate occurs at about 30% AD. Protein and lipid content ranged from 32.3–38.4% and 18.1–23.1%, respectively. Fatty acid distribution ranged from C10 to C26. In all AD percentages the predominant fatty acids were the medium chain FA C16 to C18 constituting up to about 89% of the total FA at 0% AD and 15% AD and up to about 54% of the total FA at 30% AD and 50% AD. With respect to unsaturation, monounsaturated FA (MUFA) were predominant, up to 56%, while significant percentages, up to about 38%, of saturated FA (SFA) were also produced. The SN, IV, CN, and HHV ranged from 198.5–208.3 mg KOH/g FA, 74.5–93.1 g I/100 g FAME, 52.7–56.1, and 39.7–40.0 MJ/kg, respectively. The results showed that with increasing AD percentage, the CN values tend to increase, while decrease in IV leads to biofuel with better ignition quality.

Mass cultivation and harvesting of microalgal biomass: Current trends and future perspectives

Microalgae are unicellular photosynthetic organisms capable of producing high-value metabolites like carbohydrates, lipids, proteins, polyunsaturated fatty acids, vitamins, pigments, and other high-value metabolites. Microalgal biomass gained more interest for the production of nutraceuticals, pharmaceuticals, therapeutics, food supplements, feed, biofuel, bio-fertilizers, etc. due to its high lipid and other high-value metabolite content. Microalgal biomass has the potential to convert trapped solar energy to organic materials and potential metabolites of nutraceutical and industrial interest. They have higher efficiency to fix carbon dioxide (CO₂) and subsequently convert it into biomass and compounds of potential interest. However, to make microalgae a potential industrial candidate, cost-effective cultivation systems and harvesting methods for increasing biomass yield and reducing the cost of downstream processing have become extremely urgent and important. In this review, the current development in different microalgal cultivation systems and harvesting methods has been discussed.

Potential Anti-Obesity, Anti-Steatosis, and Anti-Inflammatory Properties of Extracts from the Microalgae Chlorella vulgaris and Chlorococcum amblystomatis under Different Growth Conditions

Microalgae are known as a producer of proteins and lipids, but also of valuable compounds for human health benefits (e.g., polyunsaturated fatty acids (PUFAs); minerals, vitamins, or other compounds). The overall objective of this research was to prospect novel products, such as nutraceuticals from microalgae, for application in human health, particularly for metabolic diseases. Chlorella vulgaris and Chlorococcum amblystomatis were grown autotrophically, and C. vulgaris was additionally grown heterotrophically. Microalgae biomass was extracted using organic solvents (dichloromethane, ethanol, ethanol with ultrasound-assisted extraction). Those extracts were evaluated for their bioactivities, toxicity, and metabolite profile. Some of the extracts reduced the neutral lipid content using the zebrafish larvae fat metabolism assay, reduced lipid accumulation in fatty-acid-overloaded HepG2 liver cells, or decreased the LPS-induced inflammation reaction in RAW264.7 macrophages. Toxicity was not observed in the MTT assay in vitro or by the appearance of lethality or malformations in zebrafish larvae in vivo. Differences in metabolite profiles of microalgae extracts obtained by UPLC-LC-MS/MS and GNPS analyses revealed unique compounds in the active extracts, whose majority did not have a match in mass spectrometry databases and could be potentially novel compounds. In conclusion, microalgae extracts demonstrated anti-obesity, anti-steatosis, and anti-inflammatory activities and could be valuable resources for developing future nutraceuticals. In particular, the ultrasound-assisted ethanolic extract of the heterotrophic C. vulgaris significantly enhanced the anti-obesity activity and demonstrated that the alteration of culture conditions is a valuable approach to increase the production of high-value compounds.

Microalgal Systems for Wastewater Treatment: Technological Trends and Challenges towards Waste Recovery

Wastewater (WW) treatment using microalgae has become a growing trend due the economic and environmental benefits of the process. As microalgae need CO2, nitrogen, and phosphorus to grow, they remove these potential pollutants from wastewaters, making them able to replace energetically expensive treatment steps in conventional WW treatment. Unlike traditional sludge, biomass can be used to produce biofuels, biofertilizers, high value chemicals, and even next-generation growth media for “organically” grown microalgal biomass targeting zero-waste policies and contributing to a more sustainable circular bioeconomy. The main challenge in this technology is the techno-economic feasibility of the system. Alternatives such as the isolation of novel strains, the use of native consortia, and the design of new bioreactors have been studied to overcome this and aid the scale-up of microalgal systems. This review focuses on the treatment of urban, industrial, and agricultural wastewaters by microalgae and their ability to not only remove, but also promote the reuse, of those pollutants. Opportunities and future prospects are discussed, including the upgrading of the produced biomass into valuable compounds, mainly biofuels.

Effect of Different Influent Conditions on Biomass Production and Nutrient Removal by Aeration Microalgae Membrane Bioreactor (ICFB-MMBR) System for Mariculture Wastewater Treatment

The nutrient removal and biomass production of the internal circulating fluidized bed microalgae membrane bioreactor (ICFB-MMBR) was studied under different cultivation modes, influent TOC, influent pH, and influent N/P. Platymonas helgolandica tsingtaoensis was used as the biological source. The growth of P. helgolandica tsingtaoensis and the removal efficiency of pollutants in the mixotrophy culture mode were improved compared with other culture modes. With the increased influent TOC, the average growth rate of P. helgolandica tsingtaoensis increased, and ammonia nitrogen and total phosphorus removal rate were improved. The P. helgolandica tsingtaoensis growth rate and nutrient removal efficiencies at the influent pH of 8 were the best among the different influent pH values. As the influent N/P ratio increased from 5 to 20, the P. helgolandica tsingtaoensis growth rate and pollutant removal rate increased gradually. When the influent N/P ratio was higher than 20, the P. helgolandica tsingtaoensis growth rate and pollutant removal rate tended to be stable and did not significantly change with the increase of influent N/P ratio. At the proper influent conditions, the high P. helgolandica tsingtaoensis biomass and nutrient removal efficiency could be obtained in the microalgae membrane bioreactor, which could provide a theoretical basis for the application of the system for wastewater treatment.

Single-Cell Oils from Oleaginous Microorganisms as Green Bio-Lubricants: Studies on Their Tribological Performance

Biolubricants refer to eco-friendly, biodegradable, and non-toxic lubricants. Their applications are still limited compared to mineral oils; however, their sustainable credentials are making them increasingly attractive. Vegetable oils are frequently used for this purpose. However, vegetable oils have issues of low lipid productivity, dependence on climatic conditions, and need for agricultural land. Microbial oils represent a more sustainable alternative. To ensure their widespread applicability, the suitability of microbial oils from a physicochemical point of view needs to be determined first. In this study, oils obtained from various oleagenic microbes—such as microalgae, thraustochytrids, and yeasts—were characterized in terms of their fatty acid profile, viscosity, friction coefficient, wear, and thermal stability. Oleaginous microalgal strains (Auxenochlorella protothecoides and Chlorella sorokiniana), thraustochytrids strains (Aurantiochytrium limacinum SR21 and Aurantiochytrium sp. T66), and yeast strains (Rhodosporidium toruloides and Cryptococcus curvatus) synthesized 64.5%, 35.15%, 47.89%, 47.93%, 56.42%, and 52.66% of lipid content, respectively. Oils from oleaginous microalgae (A. protothecoides and C. sorokiniana) and yeasts (R. toruloides and C. curvatus) possess excellent physicochemical and tribological qualities due to high amount of monounsaturated fatty acids (oleic acid C18:1 content, 56.38%, 58.82%, 46.67%, 38.81%) than those from oleaginous thraustochytrids (A. limacinum SR21 and Aurantiochytrium sp. T66; 0.96%, 0.08%, respectively) supporting their use as renewable and biodegradable alternatives to traditional mineral oil-based lubricants. Oil obtained from microalgae showed a lower friction coefficient than oils obtained from yeasts and thraustochytrids.

Biodiesel Production From Lignocellulosic Biomass Using Oleaginous Microbes: Prospects for Integrated Biofuel Production

Biodiesel is an eco-friendly, renewable, and potential liquid biofuel mitigating greenhouse gas emissions. Biodiesel has been produced initially from vegetable oils, non-edible oils, and waste oils. However, these feedstocks have several disadvantages such as requirement of land and labor and remain expensive. Similarly, in reference to waste oils, the feedstock content is succinct in supply and unable to meet the demand. Recent studies demonstrated utilization of lignocellulosic substrates for biodiesel production using oleaginous microorganisms. These microbes accumulate higher lipid content under stress conditions, whose lipid composition is similar to vegetable oils. In this paper, feedstocks used for biodiesel production such as vegetable oils, non-edible oils, oleaginous microalgae, fungi, yeast, and bacteria have been illustrated. Thereafter, steps enumerated in biodiesel production from lignocellulosic substrates through pretreatment, saccharification and oleaginous microbe-mediated fermentation, lipid extraction, transesterification, and purification of biodiesel are discussed. Besides, the importance of metabolic engineering in ensuring biofuels and biorefinery and a brief note on integration of liquid biofuels have been included that have significant importance in terms of circular economy aspects.

Microalgal Production of Biofuels Integrated with Wastewater Treatment

Human civilization will need to reduce its impacts on air and water quality and reduce its use of fossil fuels in order to advance towards a more sustainable future. Using microalgae to treat wastewater as well as simultaneously produce biofuels is one of the approaches for a sustainable future. The manufacture of biofuels from microalgae is one of the next-generation biofuel solutions that has recently received a lot of interest, as it can remove nutrients from the wastewater whilst capturing carbon dioxide from the atmosphere. The resulting biomass are employed to generate biofuels, which can run fuel cell vehicles of zero emission, power combustion engines and power plants. By cultivating microalgae in wastewater, eutrophication can be prevented, thereby enhancing the quality of the effluent. Thus, by combining wastewater treatment and biofuel production, the cost of the biofuels, as well as the environmental hazards, can be minimized, as there is a supply of free and already available nutrients and water. In this article, the steps involved to generate the various biofuels through microalgae are detailed.

Nutrient deficiency and an algicidal bacterium improved the lipid profiles of a novel promising oleaginous dinoflagellate, Prorocentrum donghaiense, for biodiesel production

The lipid production potential of 8 microalgae species was investigated. Among these eight species, the best strain was a dominant bloom-causing dinoflagellate, Prorocentrum donghaiense; this species had a lipid content of 49.32±1.99% and exhibited a lipid productivity of 95.47±0.99 mg L^-1 d^-1, which was 2-fold higher than the corresponding values obtained for the oleaginous microalgae Nannochloropsis gaditana and Phaeodactylum tricornutum. P. donghaiense, which is enriched in C16:0 and C22:6, is appropriate for commercial DHA production. Nitrogen or phosphorus stress markedly induced lipid accumulation to levels surpassing 75% of the dry weight, increased the C18:0 and C17:1 contents, and decreased the C18:5 and C22:6 contents, and these effects resulted in decreases in the unsaturated fatty-acid levels and changes in the lipid properties of P. donghaiense such that the species met the biodiesel specification standards. Compared with the results obtained under N-deficient conditions, the enhancement in the activity of alkaline phosphatase of P. donghaiense observed under P-deficient conditions could partly alleviate the adverse effects on the photosynthetic system exerted by P deficiency to induce the production of more carbohydrates for lipogenesis. The supernatant of the algicidal bacterium Paracoccus sp. Y42 culture lysed P. donghaiense without decreasing its lipid content, which resulted in facilitation of the downstream oil extraction process and energy savings through the lysis of algal cells. The Y42 supernatant treatment improved the lipid profiles of algal cells by increasing their C16:0, C18:0 and C18:1 contents and decreasing their C18:5 and C22:6 contents, which is favourable for biodiesel production. IMPORTANCE This study demonstrates the high potential of P. donghaiense, a dominant bloom-causing dinoflagellate, for lipid production. Compared with previously studied oleaginous microalgae, P. donghaiense exhibit greater potential for practical application due to its higher biomass and lipid contents. Nutrient deficiency and the algicidal bacterium Paracoccus sp. Y42 could improve the suitability of the lipid profile of P. donghaiense for biodiesel production. Furthermore, Paracoccus sp. Y42 effectively lyse algal cells, which facilitates the downstream oil extraction process for biodiesel production and results in energy savings through the lysing of algal cells. This study provides a more promising candidate for the production of DHA for human nutritional products and of microalgal biofuel, as well as a more cost-effective method for breaking algal cells. The high lipid productivity of P. donghaiense and algal cell lysis by algicidal bacteria contribute to reductions in the production cost of microalgal oil.

The Role of Heterotrophic Microalgae in Waste Conversion to Biofuels and Bioproducts

In the last few decades, microalgae have attracted attention from the scientific community worldwide, being considered a promising feedstock for renewable energy production, as well as for a wide range of high value-added products such as pigments and poly-unsaturated fatty acids for pharmaceutical, nutraceutical, food, and cosmetic markets. Despite the investments in microalgae biotechnology to date, the major obstacle to its wide commercialization is the high cost of microalgal biomass production and expensive product extraction steps. One way to reduce the microalgae production costs is the use of low-cost feedstock for microalgae production. Some wastes contain organic and inorganic components that may serve as nutrients for algal growth, decreasing the culture media cost and, thus, the overall process costs. Most of the research studies on microalgae waste treatment use autotrophic and mixotrophic microalgae growth. Research on heterotrophic microalgae to treat wastes is still scarce, although this cultivation mode shows several benefits over the others, such as higher organic carbon load tolerance, intracellular products production, and stability in production all year round, regardless of the location and climate. In this review article, the use of heterotrophic microalgae to simultaneously treat wastes and produce high value-added bioproducts and biofuels will be discussed, critically analyzing the most recent research done in this area so far and envisioning the use of this approach to a commercial scale in the near future.

The oleaginous astaxanthin-producing alga Chromochloris zofingiensis: potential from production to an emerging model for studying lipid metabolism and carotenogenesis

The algal lipids-based biodiesel, albeit having advantages over plant oils, still remains high in the production cost. Co-production of value-added products with lipids has the potential to add benefits and is thus believed to be a promising strategy to improve the production economics of algal biodiesel. Chromochloris zofingiensis, a unicellular green alga, has been considered as a promising feedstock for biodiesel production because of its robust growth and ability of accumulating high levels of triacylglycerol under multiple trophic conditions. This alga is also able to synthesize high-value keto-carotenoids and has been cited as a candidate producer of astaxanthin, the strongest antioxidant found in nature. The concurrent accumulation of triacylglycerol and astaxanthin enables C. zofingiensis an ideal cell factory for integrated production of the two compounds and has potential to improve algae-based production economics. Furthermore, with the advent of chromosome-level whole genome sequence and genetic tools, C. zofingiensis becomes an emerging model for studying lipid metabolism and carotenogenesis. In this review, we summarize recent progress on the production of triacylglycerol and astaxanthin by C. zofingiensis. We also update our understanding in the distinctive molecular mechanisms underlying lipid metabolism and carotenogenesis, with an emphasis on triacylglycerol and astaxanthin biosynthesis and crosstalk between the two pathways. Furthermore, strategies for trait improvements are discussed regarding triacylglycerol and astaxanthin synthesis in C. zofingiensis.

AP2/ERF and R2R3-MYB family transcription factors: potential associations between temperature stress and lipid metabolism in Auxenochlorella protothecoides

BACKGROUND

Both APETALA2/Ethylene Responsive Factor (AP2/ERF) superfamily and R2R3-MYB family were from one of the largest diverse families of transcription factors (TFs) in plants, and played important roles in plant development and responses to various stresses. However, no systematic analysis of these TFs had been conducted in the green algae A. protothecoides heretofore. Temperature was a critical factor affecting growth and lipid metabolism of A. protothecoides. It also remained largely unknown whether these TFs would respond to temperature stress and be involved in controlling lipid metabolism process.

RESULTS

Hereby, a total of six AP2 TFs, six ERF TFs and six R2R3-MYB TFs were identified and their expression profiles were also analyzed under low-temperature (LT) and high-temperature (HT) stresses. Meanwhile, differential adjustments of lipid pathways were triggered, with enhanced triacylglycerol accumulation. A co-expression network was built between these 18 TFs and 32 lipid-metabolism-related genes, suggesting intrinsic associations between TFs and the regulatory mechanism of lipid metabolism.

CONCLUSIONS

This study represented an important first step towards identifying functions and roles of AP2 superfamily and R2R3-MYB family in lipid adjustments and response to temperature stress. These findings would facilitate the biotechnological development in microalgae-based biofuel production and the better understanding of photosynthetic organisms' adaptive mechanism to temperature stress.