Pure ZnO and composite ZnO/TiO2 catalyst plates: A comparative study for the degradation of azo dye, pesticide and antibiotic in aqueous solutions

Light-driven photocatalysis as an effective tool for degradation of antibiotics

Antibiotic contamination has become a severe issue and a dangerous concern to the environment because of large release of antibiotic effluent into terrestrial and aquatic ecosystems. To try and solve these issues, a plethora of research on antibiotic withdrawal has been carried out. Recently photocatalysis has received tremendous attention due to its ability to remove antibiotics from aqueous solutions in a cost-effective and environmentally friendly manner with few drawbacks compared to traditional photocatalysts. Considerable attention has been focused on developing advanced visible light-driven photocatalysts in order to address these problems. This review provides an overview of recent developments in the field of photocatalytic degradation of antibiotics, including the doping of metals and non-metals into ultraviolet light-driven photocatalysts, the formation of new semiconductor photocatalysts, the advancement of heterojunction photocatalysts, and the building of surface plasmon resonance-enhanced photocatalytic systems.

Diode characteristics, piezo-photocatalytic antibiotic degradation and hydrogen production of Ce3+ doped ZnO nanostructures

Piezo-photocatalysis of ZnO nanostructures had recently well attracted due to their exceptional potential in degrading the antibiotics and scalable hydrogen production. Here, we have synthesized the Ce3+ doped ZnO nanospheres in a facile wet chemical strategy. Dopant ions induced morphological evolution and optical bandgap tuning had observed in our experiment. Optical absorbance spectrum had confirmed the bandgap shortening occurs with Ce3+ doped ZnO specimens. The bandgap gap value had reduced to 2.82 eV from 3.05eV confirming the visible light responsivity of ZnO nano specimens. Obtained Zn(1-x)CexO nanospheres were utilized to fabricate the p-Si/n- Zn(1-x)CexO heterojunction diodes as well studied the improved electrical conductivity for the Ce3+ specimen-based diodes. Besides, ideality factor and barrier height values of the heterojunction diodes ZnO/p-Si, Zn0.99Ce0.01O/p-Si, Zn0.97Ce0.03O/p-Si, and Zn0.95Ce0.05O/p-Si are 15.97 & 0.43 eV, 15.47 & 0.44 eV, 8.02 & 0.46 eV and 5.21 & 0.47 eV, respectively. Direct sunlight assisted piezo-photocatalytic tetracycline (TC) degradation efficiency of ZnO, Zn0.99Ce0.01O, Zn0.97Ce0.03O, and Zn0.95Ce0.05O nanostructures respectively are 64%, 69%, 74% and 82%. We have produced the hydrogen quantity of 1234 μ mol h-1, 1490 μ mol h-1, 1750 μ mol h-1 and 1980 μ mol h-1 with 0%, 1%, 3% and 5% Ce3+ doped ZnO specimens under the direct sunlight assisted piezo-photocatalytic H2 production from H2S splitting.

Sputter -coated N-enriched mixed metal oxides (Ta2O5-Nb2O5-N) composite: A resilient solar driven photocatalyst for water purification

This study demonstrated the formation of N-enriched mixed metal oxides (Ta₂O₅-Nb₂O₅-N and Ta₂O₅-Nb₂O₅) thin film composites used as photocatalysts to degrade P-Rosaniline Hydrochloride (PRH-Dye) dye under solar radiation. By controlling the N gas flow rate during the sputtering process, the N concentration in the Ta₂O₅-Nb₂O₅-N composite is significantly included, and demonstrated by XPS and HRTEM analysis. With the help of XPS and HRTEM investigations, it was determined that the addition of N to Ta₂O₅-Nb₂O₅-N significantly enhances the active sites. The Ta-O-N bond (N 1 s and Ta 4p_3/2 spectra) was verified by the XPS spectra. Ta₂O₅-Nb₂O₅ was found to have a lattice interplanar distance (d-spacing) of 2.52, whereas Ta₂O₅-Nb₂O₅-N showed the 2.5 (620 planes). A sputter-coated Ta₂O₅-Nb₂O₅and Ta₂O₅-Nb₂O₅-N photocatalysts were prepared, and their photocatalytic activity was evaluated using PRH-Dye as a model pollutant under solar radiation by adding H₂O₂ (0.01 mol). The photocatalytic activity of the Ta₂O₅-Nb₂O₅-N composite was compared with TiO₂ (P-25) and Ta₂O₅-Nb₂O₅. Ta₂O₅-Nb₂O₅-N showed very high photocatalytic activity compared to Degussa P-25 TiO₂ and Ta₂O₅-Nb₂O₅ under solar radiation and confirmed the presence of N in Ta₂O₅-Nb₂O₅-N significantly increased the generation of ˙OH radicals (in pH 3, 7 and 9). With the use of LC/MS, the stable intermediates or metabolite created during the photooxidation of PRH-Dye were assessed. The results of this study will provide useful insights on how Ta₂O₅-Nb₂O₅-N influences the efficiency of water pollution remediation.

Polymeric graphitic carbon nitride layers decorated with erbium oxide and enhanced photocatalytic performance under visible light irradiation

Developing and implementing visible light active organic-inorganic hybrid semiconductor nanomaterials with enhanced photocatalytic properties find newer environmental and energy treatment capabilities. Here, we are reporting polymeric g-C₃N₄ layers coated with different propositions of erbium oxide nanoparticles, characterized using XPS, UV-Vis-DRS, FT-IR, HR-TEM, FE-SEM, elemental mapping, XRD and surface area techniques and its photocatalytic activities were evaluated under visible light irradiations. The hybrid nanocomposite materials possess better crystalline nature and erbium oxide particles were on the surface of polymeric g-C₃N₄. The surface area and bandgap energy of the polymeric g-C₃N₄-erbium oxide (5 wt%) nanohybrid composite were 99.9 m²/g and 2.52 eV. The photocatalytic activities as prepared nanohybrid composites were assessed for the oxidation of orange G dye molecules in the presence of visible light and were highly active in a broader range of pH with the presence of various inorganic anions. The rate of photocatalytic oxidation of dye molecules varied from 4.79 × 10^-4 to 1.77 × 10^-4 min^-1 for the initial concentration of 5 to 20 ppm and retained its activities above 95% up to three cycles of reusability. Hence, the organic-inorganic novel catalytic nanohybrid composite may find more comprehensive applications in the area of environmental and energy applications.

Multi-function adsorbent-photocatalyst MXene-TiO2 composites for removal of enrofloxacin antibiotic from water

MXenes, a new family of two-dimensional transition metal carbides or nitrides, have attracted tremendous attention for various applications due to their unique properties such as good electrical conductivity, hydrophilicity, and ion intercalability. In this work, Ti₃C₂ MXene, or MX, is converted to MX-TiO₂ composites using a simple and rapid microwave hydrothermal treatment in HCl/NaCl mixture solution that induces formation of fine TiO₂ particles on the MX parent structure and imparts photocatalytic activity to the resulting MX-TiO₂ composites. The composites were used for enrofloxacin (ENR), a frequently found contaminating antibiotic, removal from water. The relative amount of the MX and TiO₂ can be controlled by controlling the hydrothermal temperature resulting in composites with tunable adsorption/photocatalytic properties. NaCl addition was found to play important role as composites synthesized without NaCl could not adsorb enrofloxacin well. Adding NaCl into the hydrothermal treatment causes sodium ions to be simultaneously intercalated into the composite structure, improving ENR adsorption greatly from 1 to 6 mg ENR/g composite. It also slows down the MX to TiO₂ conversion leading to a smaller and more uniform distribution of TiO₂ particles on the structure. MX-TiO₂/NaCl composites, which have sodium intercalated in their structures, showed both higher ENR adsorption and photocatalytic activity than composites without NaCl despite the latter having higher TiO₂ content. Adsorbed ENR on the composites can be efficiently degraded by free radicals generated from the photoexcited TiO₂ particles, leading to high photocatalytic degradation efficiency. This demonstrates the synergetic effect between adsorption and photocatalytic degradation of the synthesized compounds.

Insight into advanced oxidation processes for the degradation of fluoroquinolone antibiotics: Removal, mechanism, and influencing factors

The enrichment and transport of antibiotics in the environments pose many potential hazards to aquatic animals and humans, which has become one of the public health challenges worldwide. As a widely used class of antibiotics, fluoroquinolones (FQs) generally accumulated in the environments as traditional sewage treatment plants cannot completely remove them. Advanced oxidation processes (AOPs) have been shown to be a promising method for the abatement of antibiotic contamination. In this review, influencing factors and relevant mechanisms of FQs removal by various AOPs were summarized. Compared with other AOPs, photocatalytic ozone may be considered as a cost-effective method for degrading FQs. Finally, the benefits and application restrictions of AOPs were discussed, along with proposed research directions to provide new insights into the control of FQs pollutant via AOPs in practical applications.

Fabrication of Graphene-Based TiO2@CeO2 and CeO2@TiO2 Core-Shell Heterostructures for Enhanced Photocatalytic Activity and Cytotoxicity

Development of light-harvesting properties and inhibition of photogenerated charge carrier recombination are of paramount significance in the photocatalytic process. In the present work, we described the synthesis of core-shell heterostructures, which are composed of titanium oxide (TiO₂) and cerium oxide (CeO₂) deposited on a reduced graphene oxide (rGO) surface as a conductive substrate. Following the synthesis of ternary rGO-CeO₂@TiO₂ and rGO-TiO₂@CeO₂ nanostructures, their photocatalytic activity was investigated toward the degradation of rhodamine B dye as an organic pollutant under UV light irradiation. The obtained structures were characterized with high-resolution transmission electron microscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer-Emmett-Teller, X-ray photoelectron spectroscopy surface analysis, and UV-Vis spectroscopy. Various parameters including pH, catalyst dosage, temperature, and contact time were studied for photocatalysis optimization. Heterostructures showed considerable advantages because of their high surface area and superior photocatalytic performance. In contrast, rGO-CeO₂@TiO₂ showed the highest photocatalytic activity, which is attributed to the more effective electron-hole separation and quick suppression of charge recombination at core-shell phases. A biological assay of the prepared heterostructure was performed to determine the cytotoxicity against breast cancer cells (MCF-7) and demonstrated a very low survival rate at 7.65% of cells at the 17.5 mg mL^-1 concentration of applied photocatalyst.

Remediation of pesticides using TiO2 based photocatalytic strategies: A review

Nowadays, pesticides are regarded as the most dangerous of the various organic pollutants, posing substantial environmental and human threats worldwide. Pesticide contamination has become one of the most crucial environmental issues due to its bio-persistence and bioaccumulation. Different conventional methods are being utilized for pesticide removal, yet pesticides are thought to be significantly present in the environment. The development and application of sophisticated wastewater treatment methods are being pursued to remove contaminants effectively, particularly pesticides. In the past several decades, nanoscience and nanotechnology have emerged as essential tools for the identification, removal, and mineralization of persistent pesticides by employing advanced nanomaterials such as pristine titanium dioxide (TiO₂), doped TiO₂, nanocomposites (NCs) TiO₂, and ternary nanocomposites (TNCs) TiO₂ by advanced oxidation processes (AOPs). Advancement in the characteristics of TiO₂ by doping, co-doping, construction of NCs and TNCs has contributed to the dramatic efficiency up-gradation by reducing band gap, solar active photocatalyst, enhancing PCA, high photostability, chemically inertness and multiple time reusability. Based on previous literature, utilizing La-TiO₂ NCs photocatalyst, the mineralization of pesticide (imidacloprid) attained up to 98.17% that is almost 40-53% greater than pristine TiO₂. The present review attempt to discuss the recent research performed on TiO₂ based nanoparticles (NPs) and NCs for photocatalytic mineralization of various pesticides. The basic mechanism of TiO₂ photocatalysis, types of reactors used for photocatalysis, and optimized experimental conditions of TiO₂ for pesticides mineralization are discussed.

Photocatalytic Degradation of Some Typical Antibiotics: Recent Advances and Future Outlooks

The existence of antibiotics in the environment can trigger a number of issues by fostering the widespread development of antimicrobial resistance. Currently, the most popular techniques for removing antibiotic pollutants from water include physical adsorption, flocculation, and chemical oxidation, however, these processes usually leave a significant quantity of chemical reagents and polymer electrolytes in the water, which can lead to difficulty post-treating unmanageable deposits. Furthermore, though cost-effectiveness, efficiency, reaction conditions, and nontoxicity during the degradation of antibiotics are hurdles to overcome, a variety of photocatalysts can be used to degrade pollutant residuals, allowing for a number of potential solutions to these issues. Thus, the urgent need for effective and rapid processes for photocatalytic degradation leads to an increased interest in finding more sustainable catalysts for antibiotic degradation. In this review, we provide an overview of the removal of pharmaceutical antibiotics through photocatalysis, and detail recent progress using different nanostructure-based photocatalysts. We also review the possible sources of antibiotic pollutants released through the ecological chain and the consequences and damages caused by antibiotics in wastewater on the environment and human health. The fundamental dynamic processes of nanomaterials and the degradation mechanisms of antibiotics are then discussed, and recent studies regarding different photocatalytic materials for the degradation of some typical and commonly used antibiotics are comprehensively summarized. Finally, major challenges and future opportunities for the photocatalytic degradation of commonly used antibiotics are highlighted.

The Effect of Ca2+ and Mg2+ Ions Loaded at Degradable PLA Membranes on the Proliferation and Osteoinduction of MSCs

Biodegradable membranes, including Polylactic acid (PLA)-based membranes, are commonly used in bone-tissue-related clinical procedures as biointerface to promote bone tissue regeneration. Calcium (Ca²⁺) and Magnesium (Mg²⁺) ions have been related to the promotion of osteogenesis, where the PLA membranes could be used as carrier and delivery substrate for them to provide osteogenic properties to this material. For this aim, a new ion delivery system based on biodegradable PLA membranes loaded with Mg and hydroxyapatite (HA) particles has been processed by the combination of tape casting and colloidal route. Materials characterization shows that the incorporation of Mg and HA particles changes the surface and hydrophobicity of the PLA membrane, and the in vitro degradation test shows Mg²⁺ and Ca²⁺ ion release and occasionally the precipitation of different ion species onto the membrane surface. Mouse and human Mesenchymal Stem Cells (MSC) were used to define the biocompatibility and bioactivity of these PLA membrane composites, and data indicated Mg²⁺ promotes cell proliferation and potentiates osteoinductive signals, while Ca²⁺ induces the expression of ALP osteogenic marker in human MSCs. Biodegradable PLA membranes loaded with Mg and HA particles is a promising new ion delivery system of Mg²⁺ and Ca²⁺ ions that provides osteogenic signals and works as functional biointerface interfaces with bone tissues.

Efficient photocatalytic degradation of metronidazole from aqueous solutions using Co/g-C3N4/Fe3O4 nanocomposite under visible light irradiation

Herein, the efficient degradation of a highly consumed antibiotic known as metronidazole (MNZ) in aqueous solutions using Co/g-C₃N₄/Fe₃O₄ nanocomposite under visible light irradiation was accomplished. Initially, the photocatalyst (Co/g-C₃N₄/Fe₃O₄) was synthesized by a simple hydrothermal method and then characterized by several analytical techniques, namely EDS, SEM, XRD, UV-vis DRS, and FTIR. The efficiency of the synthesized photocatalyst with regard to the degradation of the studied antibiotic (MNZ) under visible light irradiation was fully evaluated. The influential operational parameters affecting the efficiency of the degradation process such as pH (2-10), nanocomposite dosage (0.2-1 g/L), MNZ concentration (5-20 mg/L), and irradiation time (0-80 min) were optimized. The results revealed that the maximum degradation efficiency for MNZ was obtained under the following conditions: irradiation time of 60 min, pH = 8, MNZ concentration of 5 mg/L, and photocatalyst dosage of 0.7 g/L. In addition, the degradation of MNZ followed the pseudo-first-order kinetic model. The best rate constant (k) value was determined to be 0.0102 min^-1 with the correlation coefficient (R²) of 0.992. According to the results of the quenching tests, it was found out that hydroxyl radicals (OH°) were the main species responsible for the MNZ degradation. Furthermore, the applied photocatalyst (Co/g-C₃N₄/Fe₃O₄) exhibited a high level of recovery and stability after five cycles of reuse. Co/g-C₃N₄/Fe₃O₄/Vis system exhibited an excellent performance in the treatment of wastewater and real water samples. Finally, it was concluded that the synthesized nanocomposite could be potentially used as a promising and suitable photocatalyst in the degradation of other antibiotics.

Photocatalytic degradation of Penicillin G in aqueous solutions: Kinetic, degradation pathway, and microbioassays assessment

The photocatalytic degradation of pharmaceutical micropollutants of Penicillin G (PG) was investigated in a photoreactor at a laboratory scale. The impact of type of catalyst, pH, and initial concentration of PG were studied. Maximum removal efficiency was obtained at pH = 6.8, [ZnO]₀ = 0.8 g L^-1, and [PG]₀ = 5 mg L^-1 and reaction time of 150 min. The addition of persulfate sodium (PPS) enhanced the efficiency of the photocatalytic reaction. The efficiency of photolysis process in the presence of PPS was significantly improved to 72.72% compared to the classical photocatalysis system (56.71%). Optimum concentration of PPS to completely degraded PG was found to be 500 mg L^-1. The QuEChERS extraction, GC-MS/MS method, and concentration technique showed favorable performance identification of the possible mechanism of PG degradation pathway. Toxicity of PG and its by-products were evaluated using microbioassays assessment based on nine selected bacterial strains. Results confirmed the effectiveness of the implemented system and its safe use via the bacteria Bacillus subtilis, which has illustrated significant activity. Due to the high efficiency, facility benefits, and low-cost of the suggested process, the process can be considered for the degradation of various pharmaceutical contaminants in pharmaceutical industry treatment under the optimal conditions.

GC/MS screening of buckthorn phytochemicals and their use to synthesize ZnO nanoparticles for photocatalytic degradation of malachite green dye in water

Zinc oxide nanoparticles (ZnO NPs) were biosynthesized. According to gas chromatography/mass spectrometry analysis, chalcone, the main phytochemical, is probably complexed with Zn ions that are then oxidized to ZnO NPs by atmospheric O₂ during heating. The ZnO NPs were characterized by thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller surface area analysis. Sphere-like ZnO NPs were formed with 11 nm mean crystallite size, 5.2 m² g^-1 surface area, and 0.02 cm³ g^-1 total pore volume. The synthesized ZnO showed excellent photocatalytic degradation (96.5±0.24% in 1 hour at 25 °C) of malachite green (MG) in aqueous solutions under ultraviolet light at optimum conditions; pH 10, MG initial concentration of 20 mg L^-1, and ZnO dose of 1.5 g L^-1. Also, ZnO showed very good reusability (92.9± 0.2% after five runs). The experimental data obeyed pseudo-first-order kinetics (R² = 0.92). The photocatalysis process was dependent on the following species in the order: OH^. > electron/positive hole pairs > O₂^.-. Moreover, photodegradation efficiency decreased in the presence of CO₃^2-, HCO₃^-, and Cl^-, but increased in the presence of NO₃^- and SO₄^2- ions. Thus, the green synthesized ZnO NPs can be applied as an efficient photocatalyst for the removal of MG from aqueous media.

Treatment technologies to mitigate the harmful effects of recalcitrant fluoroquinolone antibiotics on the environ- ment and human health

Antibiotic proliferation in the environment and their persistent nature is an issue of global concern as they induce antibiotic resistance threatening both human health and the ecosystem. Antibiotics have therefore been categorized as emerging pollutants. Fluoroquinolone (FQs) antibiotics are an emerging class of contaminants that are used extensively in human and veterinary medicine. The recalcitrant nature of fluoroquinolones has led to their presence in wastewater, effluents and water bodies. Even at a low concentration, FQs can stimulate antibacterial resistance. The main sources of FQ contamination include waste from pharmaceutical manufacturing industries, hospitals and households that ultimately reaches the wastewater treatment plants (WWTPs). The conventional WWTPs are unable to completely remove FQs due to their chemical stability. Therefore, the development and implementation of more efficient, economical, convenient treatment and removal technologies are needed to adequately address the issue. This review provides an overview of the technologies available for the removal of fluoroquinolone antibiotics from wastewater including adsorptive removal, advanced oxidation processes, removal using non-carbon based nanomaterials, microbial degradation and enzymatic degradation. Each treatment technology is discussed on its merits and limitations and a comparative view is presented on the choice of an advanced treatment process for future studies and implementation. A discussion on the commercialization potential and eco-friendliness of each technology is also included in the review. The importance of metabolite identification and their residual toxicity determination has been emphasized. The last section of the review provides an overview of the policy interventions and regulatory frameworks that aid in retrofitting antibiotics as a central key focus contaminant and thereby defining the discharge limits for antibiotics and establishing safe manufacturing practices.

Adsorption and detoxification of pharmaceutical compounds from wastewater using nanomaterials: A review on mechanism, kinetics, valorization and circular economy

Antibiotics overuse, inappropriate conduct, and discharge have led to adverse effects on various ecosystems. The occurrence of antibiotics in surface and drinking water is a matter of global concern. It is responsible for multiple disorders, including disruption of endocrine hormones and high chronic toxicity. The hospitals, pharmaceutical industries, households, cattle farms, and aquaculture are the primary discharging sources of antibiotics into the environment. This review provides complete detail on applying different nanomaterials or nanoparticles for the efficient removal of antibiotics from the diverse ecosystem with a broader perspective. Efforts have been made to focus on the degradation pathways and mechanism of antibiotic degradation using nanomaterials. More light has been shed on applying nanostructures in photocatalysis, which would be an economical and efficient solution. The nanoscale material or nanoparticles have incredible potential for mineralizing pharmaceutical compounds in aqueous solutions at low cost, easy handling characteristics, and high efficacy. Furthermore, nanoparticles can absorb the pharmaceutical by-products and wastes at a minimum cost as they can be easily recycled. With the increasing number of research in this direction, the valorization of pharmaceutical wastes and by-products will continue to expand as we progress from old conventional approaches towards nanotechnology. The utilization of nanomaterials in pharmaceutical wastewater remediation is discussed with a major focus on valorization, energy generation, and minimization and its role in the circular economy creating sustainable development.

Bio-synthesized Cu-ZnO hetro-nanostructure for catalytic degradation of organophosphate chlorpyrifos under solar illumination

In present study, a simple, effective and rapid green method using leaf extract of Melia azedarach was explored for the synthesis of Cu-ZnO nano heterojunction particles. The leaf extract of Melia azedarach acts as a reducing agent and prevents the agglomeration of nanoparticles. Different standard analytical techniques were used to study the morphology and size of synthesized nanocomposite. The efficiency of the synthesized material was tested as a photocatalyst for the degradation of simulated wastewater having chlorpyriphos pesticide. The different factors have been investigated such as pH of the solution, catalyst dosage and conact time. Approximately, 81% of chlorpyrifos was degraded after 240 min of solar illumination. The generation of hydroxyl radicals at the catalysts surface owing to photo-irradiation contributed to the chlorpyrifos degradation. The maximum photo-degradation (91%) of pesticides was observed at 6.0 pH. The pathway for the degradation of chlorpyriphos has been checked by LC-MS and this hinting the absence of any harmfull side product. The COD removal and TOC was found to be 32.4% and 28.5%, respectively. The photodegradation of chlorpyriphos using Cu-ZnO nanocomposite was followed the pseudo-first-order kinetic with higher value of regressiuon coefficient (0.99).

Enhanced photo catalytic degradation of methyl orange using p–n Co3O4-TiO2 hetero-junction as catalyst

Photo catalytic degradation of pollutants is one of the techniques used for treatment of dye contaminated wastewater. TiO2 has attracted much attention as photo catalyst for treatment of contaminated water. In this study, the photo catalytic performance of TiO2 has been enhanced by formation of p–n Co3O4-TiO2 hetero-junction. The p–n Co3O4-TiO2 hetero-junction was prepared by wet incipient impregnation method and characterized by various techniques. The photo catalytic activity of prepared composite was evaluated by photo degradation of methyl orange. The as prepared Co3O4-TiO2 composite was found as effective catalyst than Co3O4 and TiO2. The higher photo catalytic activity was attributed to p–n junction formed between Co3O4 and TiO2. The degradation data was analyzed according to Eley–Rideal mechanism in terms of 1st and 2nd order kinetics.

Development of Novel Polymer Supported Nanocomposite GO/TiO2 Films, Based on poly(L-lactic acid) for Photocatalytic Applications

In the present study the development of novel polymer-supported nanocomposite graphene oxide (GO)–TiO2 films, based on poly(L-lactic acid), one of the most exploited bioplastics worldwide, was explored for photocatalytic applications. The nanocomposites were synthesized and evaluated as photocatalysts for the removal of a mixture of nine antibiotics, consisting of two sulphonamides (sulfamethoxazole, sulfadiazine), three fluoroquinolones (levofloxacin, norfloxacin, moxifloxacin), one anti-TB agent (isoniazid), one nitroimidazole (metronidazole), one lincosamide (lincomycin) and one diaminopyrimidine (trimethoprim), which are commonly found in wastewaters. The films were synthesized using 1 wt% GO and different TiO2 content (10, 25, and 50 wt%) and characterized using Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Findings confirmed the successful immobilization of GO/TiO2 in all cases. The PLLA–GO–TiO2 50 wt% composite film demonstrated higher photocatalytic efficiency and, thus, was further investigated demonstrating excellent photostability and reusability even after four cycles. Overall, PLLA–GO–TiO2 50 wt% nanocomposite demonstrated high efficiency in the photocatalytic degradation of the antibiotics in various matrices including pure water and wastewater.

Enhancing photocatalytic degradation of quinoline by ZnO:TiO2 mixed oxide: Optimization of operating parameters and mechanistic study

This study focuses on the photocatalytic degradation of quinoline, a recalcitrant heterocyclic nitrogenous aromatic organic compound, using the mixed oxide ZnO-TiO₂ photo-catalyst. Photo-catalysts were synthesized by the solid-state reaction method at different calcination temperatures of 400 °C, 600 °C, and 800 °C. Different analytical methods, including Field emission scanning electron microscope, Brunauer-Emmett-Teller surface area, X-ray diffraction, UV-vis diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy analysis were used for the catalyst characterization. The highest pore surface area of 57.9 m²g^-1 was obtained for the photo-catalyst calcined at 400 °C. The effects of calcination temperature, solution pH, initial concentration, catalyst dose as well as irradiation time were studied. At the optimum condition, i.e., calcination temperature of 400 °C, pH ≈8 and catalyst dose of 2.5 gL^-1, maximum quinoline degradation and total organic carbon (TOC) removal efficiency of ≈92% and ≈78% were obtained after 240 min for initial quinoline amount of 50 mgL^-1. The 1^st, 2^nd, and n^th-order kinetic models were applied to analyze the quinoline degradation rate. The photocatalytic mechanism was studied by drawing energy level diagram with the help of the band-gap structures of the ZnO and TiO₂, potential of the free radicals like OH and O₂ and HOMO-LUMO energy gap of the quinoline molecule. The proposed pathways of quinoline mineralization were suggested on the basis of the identified intermediates by the gas chromatograph-mass spectrometer analysis and scavenger study.

ZnO–TiO2: Synthesis, Characterization and Evaluation of Photo Catalytic Activity towards Degradation of Methyl Orange

Here in, we report the synthesis and characterization of ZnO–TiO2 composite as a potential photo catalyst for photo degradation of methyl orange under UV irradiation. ZnO–TiO2 with 1:1 ratio was synthesized via wet incipient impregnation method using TiO2 and Zn(NO3)2 ⋅ 6H2O as precursor material and the prepared composite was characterized by XRD, EDX and SEM. The synthesized composite was employed as photo catalyst for photo degradation of methyl orange. The photo degradation results showed that ZnO–TiO2 exhibited better catalytic performance than ZnO and TiO2 alone. The methyl orange photo degradation efficiency was determined to be 98, 75 and 60% over ZnO–TiO2, ZnO and TiO2 respectively using 50 mL solution of 100 mg/L at 40 °C for 120 min. The ZnO–TiO2 catalyzed photo degradation of methyl orange followed pseudo-first-order kinetic in terms of Langmuir–Hinshelwood mechanism.

TiO2 and Au-TiO2 Nanomaterials for Rapid Photocatalytic Degradation of Antibiotic Residues in Aquaculture Wastewater

Antibiotic residues in aquaculture wastewater are considered as an emerging environmental problem, as they are not efficiently removed in wastewater treatment plants. To address this issue, we fabricated TiO₂ nanotube arrays (TNAs), TiO₂ nanowires on nanotube arrays (TNWs/TNAs), Au nanoparticle (NP)-decorated-TNAs, and TNWs/TNAs, which were applied for assessing the photocatalytic degradation of eight antibiotics, simultaneously. The TNAs and TNWs/TNAs were synthesized by anodization using an aqueous NH₄F/ethylene glycol solution. Au NPs were synthesized by chemical reduction method, and used to decorate on TNAs and TNWs/TNAs. All the TiO₂ nanostructures exhibited anatase phase and well-defined morphology. The photocatalytic performance of TNAs, TNWs/TNAs, Au-TNAs and Au-TNWs/TNAs was studied by monitoring the degradation of amoxicillin, ampicillin, doxycycline, oxytetracycline, lincomycin, vancomycin, sulfamethazine, and sulfamethoxazole under ultraviolet (UV)-visible (VIS), or VIS illumination by LC-MS/MS method. All the four kinds of nanomaterials degraded the antibiotics effectively and rapidly, in which most antibiotics were removed completely after 20 min treatment. The Au-TNWs/TNAs exhibited the highest photocatalytic activity in degradation of the eight antibiotics. For example, reaction rate constants of Au-TNWs/TNAs for degradation of lincomycin reached 0.26 min⁻¹ and 0.096 min⁻¹ under UV-VIS and VIS irradiation, respectively; and they were even higher for the other antibiotics. The excellent photocatalytic activity of Au-TNWs/TNAs was attributed to the synergistic effects of: (1) The larger surface area of TNWs/TNAs as compared to TNAs, and (2) surface plasmonic effect in Au NPs to enhance the visible light harvesting.

Removal of antibiotics from aqueous solutions by nanoparticles: a systematic review and meta-analysis

Antibiotics, as one of the emerging pollutants, are non-biodegradable compounds and long-term exposure to them may affect endocrine, hormonal, and genetic systems of human beings, representing a potential risk for both the environment and human health. The presence of antibiotics in surface waters and drinking water causes a global health concern. Many researches have stated that conventional methods used for wastewater treatment cannot fully remove antibiotic residues, and they may be detected in receiving waters. It is reported that nanoparticles could remove these compounds even at low concentration and under varied conditions of pH. The current study aimed to review the most relevant publications reporting the use of different nanoparticles to remove antibiotics from aqueous solutions. Moreover, meta-analysis was conducted on the results of some articles. Results of meta-analysis proved that different nanoparticles could remove antibiotics with an acceptable efficiency of 61%. Finally, this review revealed that nanoparticles are promising and efficient materials for degradation and removal of antibiotics from water and wastewater solutions. Furthermore, future perspectives of the new generation nanostructure adsorbents were discussed in this study.

Toxicity assessment and histopathological analysis of nano-ZnO against marine fish (Mugilogobius chulae) embryos

The toxicity of nano-materials has received increasing attention in recent years. Nevertheless, relatively few studies have focused on their oceanic distributions and toxicities. In this study, we assessed nano-ZnO toxicity in marine organisms using the yellowstriped goby (Mugilogobius chulae). The relative differences in nano-ZnO dissolution and dispersal in seawater and fresh water were also investigated. The effects of nano-ZnO on embryonic development, deformity, hatching, mortality, and histopathology were analyzed. In addition, the effects of the Zn²⁺ concentration on M. chulae hatching and mortality were compared. The results showed that nano-ZnO had higher solubility in seawater than in fresh water. Nano-ZnO significantly inhibited hatching. By the fifth day of exposure, the LC₅₀ of nano-ZnO was 45.40mg/L, and the mortality rate spiked. Hatching inhibition and lethality were dose-dependent over a range of 1-25mg/L nano-ZnO. Zn²⁺ inhibited hatching and increased lethality, but its effects were weaker than those of nano-ZnO at the same concentrations. Nano-ZnO also induced spinal bending, oedema, hypoplasia, and other deformities in M. chulae embryos and larvae. Histopathology revealed vacuolar degeneration, hepatocyte and enterocyte enlargement, and morphological abnormalities of the vertebrae. Therefore, nano-ZnO caused malformations in M. chulae by affecting embryonic growth and development. We conclude that nano-ZnO toxicity in seawater was significantly positively correlated with the associated Zn²⁺ concentration and sedimentary behaviour. The toxicity of nano-ZnO was cumulative and showed a critical point, beyond which embryonic and developmental toxicity in marine fish was observed.

Complex ZnO-TiO2 Core-Shell Flower-Like Architectures with Enhanced Photocatalytic Performance and Superhydrophilicity without UV Irradiation

ZnO-TiO₂ core-shell photocatalysts of a complex flower-like architecture were synthesized, using a well-controlled sol-gel coating reaction of presynthesized ZnO flower-like structures. The samples were characterized by X-ray diffraction, field emission scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, diffuse reflectance UV-vis and attenuated total reflectance-Fourier transform infrared spectroscopy, nitrogen adsorption-desorption measurements, and photoluminescence measurements. Well-defined, core-shell flowers with a wurtzite ZnO core and anatase TiO₂ shells, with variable shell thickness, were acquired by appropriately adjusting the ZnO/Ti precursor mass feed ratio in the reaction. Moreover, hollow TiO₂ flowers were obtained, and they retained their morphology following the etching of the ZnO core in an acidic solution. The photocatalytic performance of the core-shell and hollow semiconductors was evaluated via the decoloration of a methylene blue dye solution under UV-vis irradiation. The core-shell flowers exhibited a higher decoloration rate, when compared with bare ZnO flowers, TiO₂ particles, and hollow TiO₂ flowers, and the photoactivity was dependent on the TiO₂ shell thickness. This was attributed to the efficient separation of the photogenerated holes and electrons at the ZnO-TiO₂ interface. Moreover, the most photoactive core-shell catalyst exhibited excellent reusability and stability for at least three photocatalytic cycles and excellent superhydrophilicity without UV irradiation, which is due to the increased roughness of the flower-like structures.

NiS and MoS2 nanosheet co-modified graphitic C3N4 ternary heterostructure for high efficient visible light photodegradation of antibiotic

The development of efficient solar driven catalytic system for the degradation of antibiotics has become increasingly important in environmental protection and remediation. Non-noble-metal NiS and MoS₂ nanosheet co-modified graphitic C₃N₄ ternary heterostructure has been synthesized via a facile combination of hydrothermal and ultrasound method, and the ternary heterostructure has been utilized for photocatalytic degradation of antibiotic agents. The antibiotics of ciprofloxacin (CIP) and tetracycline hydrochloride (TC) were photodegraded by the hybrid under the visible light. The optimal photodegradation rate of the ternary heterostructure reaches about 96% after 2h irradiation, which is 2.1 times higher than that of pure g-C₃N₄ for TC degradation. The photocatalytic degradation rates of the ternary heterostructure for both CIP and TC obey the pseudo-first-order kinetic model. The enhanced visible light adsorption and charge separation efficiency contribute to the photocatalytic performance of the ternary heterostructure. This work provides new insights and pathways by which efficient degradation of antibiotics can be achieved and will stimulate further studies in this important field.

Hydrothermally grown CdS nanoparticles for photodegradation of anionic azo dyes under UV-visible light irradiation

A CdS photocatalyst was synthesized successfully at low temperature via a catalyst-free hydrothermal technique which is simple, green and also easily controlled. The synthesized CdS photocatalyst showed hexagonal wurtzite structure with high crystallinity and excellent optical properties. The catalyst was used for degradation of two anionic azo dyes namely reactive red (RR141) and Congo red (CR) azo dyes. The catalyst showed very high efficiency of 99.8% and 99.0% toward photodegradation of RR141 and CR dye, respectively. The photodegradation reaction followed pseudo-first order kinetics. Chemical scavenger studies showed that direct photogenerated hole transfer from CdS to the azo dye was most likely the major pathway for photodegradation of the azo dye. The chemical structure of the CdS photocatalyst remained stable after photodegradation. The CdS photocatalyst retains its original efficiency even after the fifth cycle of reuse indicating the advantages of stability and reusability. The CdS nanostructures will be suitable for removal of highly toxic and hazardous organic materials in environmental protection.

A CdS photocatalyst was synthesized successfully at low temperature via a catalyst-free hydrothermal technique which is simple, green and also easily controlled.

Visible-light-induced photo-Fenton process for the facile degradation of metronidazole by Fe/Si codoped TiO2

This work investigated the feasibility and efficiency of a heterogeneous photo-Fenton catalyst, Fe/Si codoped TiO₂, for the degradation of metronidazole (MNZ) under visible light irradiation. The Fe/Si codoped TiO₂ was prepared via a facile and simple sol–gel solvothermal process followed by annealing at 480 °C for 4 hours. High resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) measurements revealed that the photo-Fenton process did not change the structure, textural and surface morphologies of this catalyst. Elemental mapping results indicated the good dispersion of Fe and Si ions in TiO₂. Nitrogen adsorption and desorption measurements indicated that Si doping increased the surface area of the catalysts. The Fe and Si doping narrowed the band gap of TiO₂. They also facilitated the transfer of photo-generated electrons from TiO₂ to Fe(iii). Under visible light irradiation and the optimum operating conditions, MNZ could be completely degraded in 50 min by this catalyst within a wide pH range. Hydroxyl radicals and holes were verified to be responsible for degrading MNZ. The leaching of iron ions was less than 0.047 ppm even after illuminating the catalyst for 6 hours, indicating the good stability of the Fe/Si codoped TiO₂. The as-prepared catalysts with excellent catalytic activity, and remarkable reusability and stability could provide a new insight into the preparation of photocatalysts and have wide applications for antibiotics removal.

This work investigated the feasibility and efficiency of a heterogeneous photo-Fenton catalyst, Fe/Si codoped TiO₂, for the degradation of metronidazole (MNZ) under visible light irradiation.