Use of alginate, chitosan and cellulose nanocrystals as emulsion stabilizers in the synthesis of biodegradable polymeric nanoparticles

Strategies Employed to Design Biocompatible Metal Nanoparticles for Medical Science and Biotechnology Applications

The applicability of nanomaterials has evolved in biomedical domains thanks to advances in biocompatibility strategies and the mitigation of cytotoxic effects, allowing diagnostics, imaging, and therapeutic approaches. The application of nanoparticles (NP), particularly metal nanoparticles (mNPs), such as gold (Au) and silver (Ag), includes inherent challenges related to the material characteristics, surface modification, and bioconjugation techniques. By tailoring the surface properties through appropriate coating with biocompatible molecules or functionalization with active biomolecules, researchers can reach a harmonious interaction with biological systems or samples (mostly fluids or tissues). Thus, this review highlights the mechanisms associated with the obtention of biocompatible mNP and presents a comprehensive overview of methods that facilitate safe and efficient production. Therefore, we consider this review to be a valuable resource for all researchers navigating this dynamic field.

Nano-elicitation and hydroponics: a synergism to enhance plant productivity and secondary metabolism

MAIN CONCLUSION

This review has explored the importance of using a synergistic approach of nano-elicitation and hydroponics to improve plant growth and metabolite production. Furthermore, it emphasizes the significance of green nanotechnology and eco-friendly practices while utilizing this approach to promote the development of a sustainable agriculture system. Nano-elicitation stimulates metabolic processes in plants using nanoparticles (NPs) as elicitors. The stimulation of these biochemical processes can enhance plant yield and productivity, along with the production of secondary metabolites. Nanoparticles have garnered the attention of scientific community because of their unique characteristics, such as incredibly small size and large surface-to-volume ratio, which make them effective elicitors. Hydroponic systems, which optimize growing conditions to increase plant production, are typically used to study the effect of elicitors. By integrating these two approaches, the qualitative and quantitative output of plants can be increased while employing minimal resources. As the global demand for high-quality crops and bioactive compounds surges, embracing this synergistic approach alongside sustainable farming practices can pave the way for resilient agricultural systems, ensuring food security and fostering an eco-friendly environment.

Anthocyanin-Rich Butterfly Pea Petal Extract Loaded Double Pickering Emulsion Containing Nanocrystalline Cellulose: Physicochemical Properties, Stability, and Rheology

Butterfly pea petal extract (BPE)-loaded water-in-oil-in-water (W/O/W) emulsions were fabricated using nanocrystalline cellulose (NCC) as a hydrophilic stabilizer and polyglycerol polyricinoleate (PGPR) as a hydrophobic emulsifier. The impact of different concentrations of NCC and PGPR in different phase proportions on the emulsion formation, rheology, and stability of an anthocyanin-loaded (pH ≈ 7.0) emulsion was investigated. The mean droplet size of the emulsions increased as the NCC concentration increased, while color intensity (greenness) decreased as the PGPR and NCC concentrations increased. A microscopic examination confirmed that the NCC nanoparticles stabilized the inner W1/O phase, whereas the excess concentration of non-adsorbing NCC nanoparticles was suspended in the continuous aqueous phase. The rheological results showed that robust emulsion networks were formed when the NCC concentration increased. A network structure between the droplets and the development of the NCC network during the continuous phase were attributed to a gel-like behavior. Over the course of seven days, the emulsions with a higher proportion of NCC remained stable, as in samples 3%P-%N, 5%P-2%N, and 5%P@1%N, the total anthocyanin content decreased from 89.83% to 76.49%, 89.40% to 79.65, and 86.63% to 71.40%, respectively. These findings have significant implications for the accurate formulation of particle-stabilized double emulsions for anthocyanin delivery with higher stability.

Aquatic plant allelochemicals inhibit the growth of microalgae and cyanobacteria in aquatic environments

Excess nitrogen and phosphorus nutrients in the aquatic environment result in the growth of algal cells and water eutrophication, which adversely affect the aquatic environment and human health. Therefore, discovering a safe and efficient algae suppression method is necessary to ensure the ecological safety of water. Recently, the allelopathic effects of aquatic plants on algae have attracted extensive attention from researchers. This review demonstrates the current research hotspot of allelopathic algal inhibition in aquatic plants and lists the common aquatic plant species and allelochemicals. In addition, the inhibition mechanism of allelochemicals from aquatic plants on algae is systematically discussed. Moreover, the key factors affecting the inhibition of allelopathy in algae, such as pH, temperature, algal cell density, and concentration of allelochemicals, are summarized. The present utilization modes of allelochemicals on algae are also presented. Finally, the problems existing in the study of allelopathic algal inhibition of aquatic plants are highlighted, and suggestions for further research are proposed.

Preparation, characterization, and evaluation of antibacterial and cytotoxic activity of chitosan-polyethylene glycol nanoparticles loaded with amoxicillin as a novel drug delivery system

In this study, nanoparticles of amoxicillin (AMX) were prepared using chitosan (CHI) and polyethylene glycol (PEG). The physicochemical properties of the particles were investigated by FT-IR, DSC, SEM, and zeta potential analyses. The nanoparticles showed a spherical shape, and the average size of formulations was within the range of 696.20 ± 24.86 - 359.53 ± 7.41 nm. Zeta potential data demonstrated that the formulations had positive surface charges with a zeta potential range of 21.38 ± 2.28 - 7.73 ± 1.66 mV. FTIR analysis showed that the drug was successfully entrapped in the nanoparticles. DSC results suggested that the drug was present in amorphous form in the polymer matrix. In vitro release studies demonstrated that the release pattern consisted of two phases, with an initial burst release followed by a controlled and sustained release. The MTT assay results on mouse fibroblast cell line indicated that the prepared formulations did not affect the viability of the cells. In the in vitro antibacterial activity test, it was found that the drug-loaded nanoparticles have AMX-equivalent antibacterial activity against E. coli, and S. aureus. These findings revealed that the obtained nanoparticles might be a promising and safe nanocarrier system for efficient delivery of AMX.

Development and cytotoxicity evaluation of multiple nanoemulsions for oral co-delivery of 5-fluorouracil and short chain triglycerides for colorectal cancer

Colorectal cancer (CRC) is the third most common cancer in the world, but current chemotherapy options are limited due to adverse effects and low oral bioavailability of drugs. In this study, we investigated the obtainment parameters and composition of new multiple nanoemulsions (MN) based on microemulsions for oral co-delivery of 5-fluorouracil (5FU) and short-chain triglycerides (SCT, either tributyrin or tripropionin). The area of microemulsion formation was increased from 14% to 38% when monocaprylin was mixed with tricaprylin as oil phase. Addition of SCT reduced this value to 24-26%. Using sodium alginate aqueous dispersion as internal aqueous phase (to avoid phase inversion) did not further affected the area but increased microemulsion viscosity by 1.5-fold. To obtain the MN, selected microemulsions were diluted in an external aqueous phase; droplet size was 500 nm and stability improved using polyoxyethylene (den Besten et al., 2013) oleyl ether at 1-2.5% as surfactant in the external phase and a dilution ratio of 1:1 (v/v). 5FU in vitro release could be better described by the Korsmeyer-Peppas model. No pronounced changes in droplet size were observed when selected MNs were incubated in buffers mimicking gastrointestinal fluids. The 5FU cytotoxicity in monolayer cell lines presenting various mutations was influenced by its incorporation in the nanocarrier, presence of SCT and cell mutation status. The MNs selected reduced the viability of tumor spheroids (employed as 3D tumor models) by 2.2-fold compared to 5FU solution and did not affect the survival of the G. mellonella, suggesting effectiveness and safety.

Chitosan particles modulate the properties of cellulose nanocrystals through interparticle interactions: Effect of concentration

The physical and chemical properties of cellulose nanocrystals (CNC) were regulated by physical crosslinking with chitosan particles (CSp). At a fixed concentration (0.5 wt%) of CNC, varying CSp concentration (0.02-0.5 wt%) influenced the morphologies and chemical properties of the obtained complex particles (CNC-CSp). The results of Fourier transform infrared spectroscopy (FTIR) and zeta potential confirmed the electrostatic and hydrogen bonding interactions between CSp and CNC. At a low CSp concentration (0.02-0.05 wt%), the charge shielding effect induced the formation of particle aggregation networks, thus showing increased viscosity, turbidity and size (153.4-2605.7 nm). At a higher CSp concentration (0.1-0.5 wt%), the hydrogen bonding interaction promoted CSp adsorption onto the surface of CNC, thus facilitating the dispersion of CNC-CSp due to electrostatic repulsion caused by surface-adsorbed CSp. In addition, CSp improved the thermal stability, hydrophobicity (41.87-60.02°) and rheological properties of CNC. Compared with CNC, CNC-CSp displayed a better emulsifying ability and emulsion stability, in which CSp could play a dual role (i.e., charge regulator and stabilizer). This study suggests that introducing CSp can improve the properties and application potentials of CNC as food colloids.

Drug Delivery Systems in the Development of Novel Strategies for Glioblastoma Treatment

Glioblastoma multiforme (GBM) is a grade IV glioma considered the most fatal cancer of the central nervous system (CNS), with less than a 5% survival rate after five years. The tumor heterogeneity, the high infiltrative behavior of its cells, and the blood-brain barrier (BBB) that limits the access of therapeutic drugs to the brain are the main reasons hampering the current standard treatment efficiency. Following the tumor resection, the infiltrative remaining GBM cells, which are resistant to chemotherapy and radiotherapy, can further invade the surrounding brain parenchyma. Consequently, the development of new strategies to treat parenchyma-infiltrating GBM cells, such as vaccines, nanotherapies, and tumor cells traps including drug delivery systems, is required. For example, the chemoattractant CXCL12, by binding to its CXCR4 receptor, activates signaling pathways that play a critical role in tumor progression and invasion, making it an interesting therapeutic target to properly control the direction of GBM cell migration for treatment proposes. Moreover, the interstitial fluid flow (IFF) is also implicated in increasing the GBM cell migration through the activation of the CXCL12-CXCR4 signaling pathway. However, due to its complex and variable nature, the influence of the IFF on the efficiency of drug delivery systems is not well understood yet. Therefore, this review discusses novel drug delivery strategies to overcome the GBM treatment limitations, focusing on chemokines such as CXCL12 as an innovative approach to reverse the migration of infiltrated GBM. Furthermore, recent developments regarding in vitro 3D culture systems aiming to mimic the dynamic peritumoral environment for the optimization of new drug delivery technologies are highlighted.

Continuous Bamboo Fibers/Fire-Retardant Polyamide 11: Dynamic Mechanical Behavior of the Biobased Composite

A biobased composite was generated from bamboo fibers (BF) and a polyamide 11 (PA11) matrix. In order to fulfill security requirements, a PA11 already containing a flame retardant (FR) was chosen: This matrix is referred as PA11-FR. In this work, the effects of flame retardant (melamine cyanurate) on the composite properties were considered. In the calorimetric study, the glass transition and melting temperatures of PA11-FR were the same as those of PA11. The melamine cyanurate (MC) had no influence on these parameters. Thermogravimetric analysis revealed that PA11-FR was less stable than PA11. The presence of MC facilitated thermal decomposition regardless of the analysis atmosphere used. It is important to note that the presence of FR did not influence processing conditions (especially the viscosity parameter) for the biosourced composite. Continuous BF-reinforced PA 11-FR composites, single ply, with 60% of fibers were processed and analyzed using dynamic mechanical analysis. In shear mode, comparative data recorded for BF/PA11-FR composite and the PA11-FR matrix demonstrated that the shear glassy modulus was significantly improved: multiplied by a factor of 1.6 due to the presence of fibers. This result reflected hydrogen bonding between reinforcing fibers and the matrix, resulting in a significant transfer of stress. In tensile mode, the conservative modulus of BF/PA11-FR reached E' = 8.91 GPa. Upon BF introduction, the matrix tensile modulus was multiplied by 5.7. It can be compared with values of a single bamboo fiber recorded under the same experimental conditions: 31.58 GPa. The difference is partly explained by the elementary fibers' lack of alignment in the composite.

Spherical Cellulose Micro and Nanoparticles: A Review of Recent Developments and Applications

Cellulose, the most abundant natural polymer, is a versatile polysaccharide that is being exploited to manufacture innovative blends, composites, and hybrid materials in the form of membranes, films, coatings, hydrogels, and foams, as well as particles at the micro and nano scales. The application fields of cellulose micro and nanoparticles run the gamut from medicine, biology, and environment to electronics and energy. In fact, the number of studies dealing with sphere-shaped micro and nanoparticles based exclusively on cellulose (or its derivatives) or cellulose in combination with other molecules and macromolecules has been steadily increasing in the last five years. Hence, there is a clear need for an up-to-date narrative that gathers the latest advances on this research topic. So, the aim of this review is to portray some of the most recent and relevant developments on the use of cellulose to produce spherical micro- and nano-sized particles. An attempt was made to illustrate the present state of affairs in terms of the go-to strategies (e.g., emulsification processes, nanoprecipitation, microfluidics, and other assembly approaches) for the generation of sphere-shaped particles of cellulose and derivatives thereof. A concise description of the application fields of these cellulose-based spherical micro and nanoparticles is also presented.

Polysaccharides as Stabilizers for Polymeric Microcarriers Fabrication

Biodegradable polymeric microparticles are widely used in drug delivery systems with prolonged-release profiles and/or cell microcarriers. Their fabrication via the oil/water emulsion solvent evaporation technique has normally required emulsifiers in the aqueous phase. The present work aims to evaluate the effectiveness of various polysaccharides, such as chitosan, hyaluronic acid, cellulose, arabinogalactan, guar and their derivatives, as an alternative to synthetic surfactants for polylactide microparticle stabilization during their fabrication. Targeted modification of the biopolymer’s chemical structure was also tested as a tool to enhance polysaccharides’ emulsifying ability. The transformation of biomacromolecules into a form of nanoparticle via bottom-up or top-down methods and their subsequent application for microparticle fabrication via the Pickering emulsion solvent evaporation technique was useful as a one-step approach towards the preparation of core/shell microparticles. The effect of polysaccharides’ chemical structure and the form of their application on the polylactide microparticles’ total yield, size distribution and morphology was evaluated. The application of polysaccharides has great potential in terms of the development of green chemistry and the biocompatibility of the formed microparticles, which is especially important in biomedicine application.

Synthesis of Biomaterial-Based Hydrogels Reinforced with Cellulose Nanocrystals for Biomedical Applications

Cellulose nanocrystals (CNC) were prepared by formic acid hydrolysis and TEMPO- (2,2,6,6-tetramethyl-piperidine-1-oxyl-) mediated oxidation. The prepared CNCs were reinforced into biopolymers chitosan (CHI), alginate (ALG), and gelatin (GEL) to obtain “CNC-ALG-GEL” and “CNC-CHI-GEL” hydrogels. The synthesized hydrogels were characterized for physicochemical, thermal, and structural characterization using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermal gravity analysis (TGA), and X-ray diffraction (XRD) analyses. Notably, the reinforcement of CNC has not altered the molecular structure of a biopolymer as revealed by FT-IR analysis. The hydrogels reinforced with CNC have shown better thermal stability and miscibility as revealed by thermal gravity analysis. The physicochemical, thermal, and structural characterization revealed the chemical interaction and electrostatic attraction between the CNC and biopolymers. The biocompatibility was investigated by evaluating the viability of the L929 fibroblast cell, which represents good biocompatibility and nontoxic nature. These hydrogels could be implemented in therapeutic biomedical research and regenerative medicinal applications.

Long-term and strong suppression against Microcystis growth and microcystin-release by luteolin continuous-release microsphere: Optimal construction, characterization, effects and proteomic mechanisms

Microcystis-dominated cyanobacterial blooms (MCBs) severely threaten ecological health by causing hypoxia and releasing microcystins (MCs). Luteolin has potential as low-cost eco-safe algaecide against Microcystis, but to enhance sustainability of its algicidal effect and elucidate underlying mechanisms at proteomic level are urgently desirable. This study optimally constructed continuous-release microsphere (CRM) of luteolin with strong solidity and durability even after long-term immersion. Applying luteolin CRM, this study developed a long-term algicidal option to strongly inhibit Microcystis growth and MC-release until 49 days, with inhibition ratios of growth and MC-release (both ≥ 98%) and inhibitory effect-lasting time (nearly 50 days) of CRM superior to most former reports, and long-term strong inhibitory effects of CRM on Microcystis growth and MC-release kept stable at various nitrogen levels. Also, luteolin CRM rendered extracellular MCs content decrease to nearby acceptable threshold for drinking water. These signified a promising prospect of luteolin CRM in sustained effective control against toxigenic MCBs in waters of different eutrophic states. Comparative proteomic analysis showed that luteolin CRM significantly up-regulated photosynthesis and protein homestasis, but down-regulated other processes including stress response, MC-synthesis/release, glycolysis, amino acid synthesis, fatty acid synthesis/β-oxidation, tricarboxylic acid cycle, transcription, translation, transport, cell shaping and cell division. These implied that continuous stress of luteolin released from CRM induced Microcystis proteome towards a shift of higher energy storage but lower energy release/consumption, which largely disturbed its physiological metabolic processes and thus negatively impact its growth. Proteomics results shed newly deep insights on algicidal mechanisms of flavonoid in the form of CRM.

Nanocellulose in Emulsions and Heterogeneous Water-Based Polymer Systems: A Review

Nanocelluloses (i.e., bacterial nanocellulose, cellulose nanocrystals, and cellulose nanofibrils) are cellulose-based materials with at least one dimension in the nanoscale. These materials have unique and useful properties and have been shown to assemble at oil-water interfaces and impart new functionality to emulsion and latex systems. Herein, the use of nanocellulose in both emulsions and heterogeneous water-based polymers is reviewed, including dispersion, suspension, and emulsion polymerization. Comprehensive tables describe past work employing nanocellulose as stabilizers or additives and the properties that can be tailored through the use of nanocellulose are highlighted. Even at low loadings, nanocellulose offers an unprecedented level of control as a property modifier for a range of emulsion and polymer applications, influencing, for example, emulsion type, stability, and stimuli-responsive behavior. Nanocellulose can tune polymer particle properties such as size, surface charge, and morphology, or be used to produce capsules and polymer nanocomposites with enhanced mechanical, thermal, and adhesive properties. The role of nanocellulose is discussed, and a perspective for future direction is presented.

Improved Controlled Release and Brain Penetration of the Small Molecule S14 Using PLGA Nanoparticles

Phosphodiesterase 7 (PDE7) is an enzyme responsible for the degradation of cyclic adenosine monophosphate (cAMP), an important cellular messenger. PDE7’s role in neurotransmission, expression profile in the brain and the druggability of other phosphodiesterases have motivated the search for potent inhibitors to treat neurodegenerative and inflammatory diseases. Different heterocyclic compounds have been described over the years; among them, phenyl-2-thioxo-(1H)-quinazolin-4-one, called S14, has shown very promising results in different in vitro and in vivo studies. Recently, polymeric nanoparticles have been used as new formulations to target specific organs and produce controlled release of certain drugs. In this work, we describe poly(lactic-co-glycolic acid) (PLGA)-based polymeric nanoparticles loaded with S14. Their preparation, optimization, characterization and in vivo drug release profile are here presented as an effort to improve pharmacokinetic properties of this interesting PDE7 inhibitor.

Hydrophobic Modification of Cellulose Nanocrystals from Bamboo Shoots Using Rarasaponins

Because of their hydrophilic tendencies, the modification of cellulose nanocrystals (CNCs) is needed for applying them as a hydrophobic drug carrier. Previous studies have investigated several modification agents, such as cetyltrimethylammonium bromide. Natural surfactants, such as rarasaponins (RSs), are suitable to avoid human health and environmental issues. In this work, RSs were attached onto CNCs from bamboo shoots to enhance their hydrophobicity. The initial RS concentration and the operating temperature were studied to obtain the best conditions for the modification process, which had significances (p-value < 5%) toward the amount of RSs linked on the CNCs (q) as the response. A q as high as 203.81 ± 0.98 mg/g was obtained at an initial RS concentration of 2000 mg/L and an operating temperature of 30 °C. The curcumin uptake on CNCs-RSs reached 12.40 ± 0.24%, while it was slowly released until approximately 78% in 3 days.

Green Plasmonic Nanoparticles and Bio-Inspired Stimuli-Responsive Vesicles in Cancer Therapy Application

: In the past years, there is a growing interest in the application of nanoscaled materials in cancer therapy because of their unique physico-chemical properties. However, the dark side of their usability is limited by their possible toxic behaviour and accumulation in living organisms. Starting from this assumption, the search for a green alternative to produce nanoparticles (NPs) or the discovery of green molecules, is a challenge in order to obtain safe materials. In particular, gold (Au NPs) and silver (Ag NPs) NPs are particularly suitable because of their unique physico-chemical properties, in particular plasmonic behaviour that makes them useful as active anticancer agents. These NPs can be obtained by green approaches, alternative to conventional chemical methods, owing to the use of phytochemicals, carbohydrates, and other biomolecules present in plants, fungi, and bacteria, reducing toxic effects. In addition, we analysed the use of green and stimuli-responsive polymeric bio-inspired nanovesicles, mainly used in drug delivery applications that have revolutionised the way of drugs supply. Finally, we reported the last examples on the use of metallic and Au NPs as self-propelling systems as new concept of nanorobot, which is able to respond and move towards specific physical or chemical stimuli in biological entities.

Properties and characteristics of nanocrystalline cellulose isolated from olive fiber

Olive fiber is a sustainable material as well as alternative biomass for extraction of nanocrystalline cellulose (NCC), which has been widely applied in various industries. In the present study, ONC-I, ONC-II, and ONC-III were extracted from olive stem fiber at different hydrolysis reaction times of 30 min, 45 min, and 60 min, respectively. The nanoparticle size was found gradually reducing from ONC-I (11.35 nm width, 168.28 nm length) to ONC-III (6.92 nm width, 124.16 nm length) due to the disintegration of cellulose fibrils. ONC-II and ONC-III possessed highly pure cellulose compartments and enhanced crystals structure. This study also showed that rigidity increased from ONC-I to ONC-II. ONC-III showed the highest crystallinity of 83.1 %, endowing it as a potentially reliable load-bearing agent. Moreover, ONC-III exhibited highest stable heat resistance among the chemically-isolated nanocellulose. We concluded that olive NCC could be promising materials for a variety of industrial applications in various fields.

Synthesis and characterisation of magnetite nanoparticles using gelatin and starch as capping agents

Nanoparticles of magnetite passivated with gelatin and starch were synthesised using a co-precipitation technique. The nanoparticles were characterised using ultraviolet-visible (UV-vis), dynamic light scattering (DLS), Zeta potential, transmission electron microscope (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The UV-vis spectra showed characteristic surface plasmon resonance of magnetite nanoparticles. The DLS results showed the nanoparticles to have average hydrodynamic diameters of 138 ± 2 and 283 ± 21 nm for particles passivated with gelatin and starch, respectively. The stability in a colloidal solution was greater in nanoparticles passivated with gelatin than nanoparticles obtained with starch, as can be seen by their Zeta potential value (-31 ± 2 and -16 ± 0.5 mV, respectively). According to the TEM evaluation, the use of gelatin allowed to obtain nanoparticles with a spherical morphology and an average size of 10 ± 2 nm. However, when using starch the nanoparticles exhibited diverse morphologies with an average size of 25 ± 7 nm. The XRD results confirmed the crystalline structure of the samples, which showed crystallite sizes of 14.90 and 24.43 nm for nanoparticles passivated with gelatin and starch, respectively. FTIR analysis proved the establishment of interactions between functional groups of biopolymers and magnetite nanoparticles.

Effect of Chitin Whiskers on the Molecular Dynamics of Carrageenan-Based Nanocomposites

Films of carrageenan (KC) and glycerol (g) with different contents of chitin nanowhiskers (CHW) were prepared by a solution casting process. The molecular dynamics of pure carrageenan (KC), carrageenan/glycerol (KCg) and KCg with different quantities of CHWs as a filler was studied using dielectric relaxation spectroscopy. The analysis of the CHW effect on the molecular mobility at the glass transition, T_g, indicates that non-attractive intermolecular interactions between KCg and CHW occur. The fragility index increased upon CHW incorporation, due to a reduction in the polymer chains mobility produced by the CHW confinement of the KCg network. The apparent activation energy associated with the relaxation dynamics of the chains at T_g slightly increased with the CHW content. The filler nature effect, CHW or montmorillonite (MMT), on the dynamic mobility of the composites was analyzed by comparing the dynamic behavior of both carrageenan-based composites (KCg/xCHW, KCg/xMMT).

Recent progress in preparation and agricultural application of microcapsules

Recent advances in life science technology have prompted the need to develop microcapsule delivery systems that can encapsulate many different functional or active materials such as drugs, peptides, and live cells, etc. The encapsulation technology is now commonly used in medicine, agriculture, food, and other many fields. The application of biodegradable microcapsule systems can not only effectively prevent the degradation of core materials in the body or the biological environment, but also improve the bioavailability, control the release and prolong the halftime or storage of core active materials. Various wall materials, preparation methods, encapsulation processes, and release mechanisms are covered in this review, as well as several main factors including pH values, temperatures, particle sizes, and additives, which can strongly influence the encapsulation efficiency, the strength, and release of microcapsules. The improvement of coating materials, preparation techniques, and challenges are also highlighted, as well as application prospects.

Synthesis and Statistical Optimization of Poly (Lactic-Co-Glycolic Acid) Nanoparticles Encapsulating GLP1 Analog Designed for Oral Delivery

Purpose

To design and stabilize Liraglutide loaded poly (lactic-co-glycolic acid) nanoparticles (PLGA NPs) proper for oral administration.

Methods

PLGA NPs were prepared by means of double emulsion solvent evaporation method and optimized by applying 7-factor 2-level Plackett-Burman screening design.

Results

Spherical shaped NPs with homogeneous distribution, 188.95 nm particle size and 51.81% encapsulation efficiency were obtained. Liraglutide was successfully entrapped in the NPs while maintaining its native amorphous nature, and its structural integrity as well.

Conclusion

Lira-PLGA NPs with the required Critical Quality Attributes (CQAs) were successfully designed by implementing a 7-factor 8-run Plackett Burman design into the extended Quality by Design (QbD) model, to elucidate the effect of formulation and process variables on the particle size, size-distribution, encapsulation efficiency and surface charge. As the developed nanoparticles maintained the native structure of the active pharmaceutical ingredient (API), they are promising compositions for the further development for the oral delivery of Lira.

A review on versatile applications of blends and composites of CNC with natural and synthetic polymers with mathematical modeling

Cellulose is world's most abundant, renewable and recyclable polysaccharide on earth. Cellulose is composed of both amorphous and crystalline regions. Cellulose nanocrystals (CNCs) are extracted from crystalline region of cellulose. The most attractive feature of CNC is that it can be used as nanofiller to reinforce several synthetic and natural polymers. In this article, a comprehensive overview of modification of several natural and synthetic polymers using CNCs as reinforcer in respective polymer matrix is given. The immense activities of CNCs are successfully utilized to enhance the mechanical properties and to broaden the field of application of respective polymer. All the technical scientific issues have been discussed highlighting the recent advancement in biomedical and packaging field.

A Systematic Study of the Effect of pH on the Initialization of Ca-deficient Hydroxyapatite to β-TCP Nanoparticles

The formation of β-tricalcium phosphate (β-TCP) nanoparticles via a wet precipitation technique was studied in a systematical way, taking reaction pH and sintering temperature parameters into account. A full transformation of Ca-deficient hydroxyapatite (CDHA) to β-TCP at 750 °C in under 3 hours from Ca++ and PO₄3- precursor solutions prepared under a pH of 5.5 was observed. For pH values higher than 6.5, CDHA can only partially transform into β-TCP and only at temperatures higher than 750 °C confirmed using X-Ray diffraction and Raman spectroscopy. The morphologies of the particles were also examined by Transmission electron microscopy. The lower temperatures and the shorter sintering time allow for a fine needle-like morphology, but with a high crystallinity, likely eliminating the possibility of excessive grain growth that is otherwise expected to occur under high-temperature treatment with long process times. We show that sintering of nanostructured, high crystallinity β-TCP at relatively low temperatures is possible via adjustment of the precursor solution parameters. Such an outcome is important for the use of β-TCP with a fine morphology imitating that of the skeletal tissues, enhancing the osteointegration of a base, load-bearing alloy to the host tissue. MTT analysis was used to test the effect of the obtained β-TCP particles on the viability of MG-63 human osteoblast-like cells.

Local and controlled release of tamoxifen from multi (layer-by-layer) alginate/chitosan complex systems

Herein, multilayer polysaccharide films were proposed and characterized as biomaterials for the local and controlled release of an antitumoral drug. To that aim, multilayer films of alginate (Alg) and chitosan (Chi) were built up through spray assisted layer-by-layer (LbL) technique employing an automatic equipment. A specific drug against breast cancer, tamoxifen (TMX), was incorporated in different intermediate positions of the multilayer Alg/Chi films. Our findings highlight that Alg/Chi multilayer films can be employed for sustained and local TMX delivery and their therapeutic effect can be modulated and optimized by the number of bilayers deposited over the loaded tamoxifen, the quantity of tamoxifen loaded in several intermediate positions and the total area of the film.

Synthesis and characterization of the removal of organic pollutants in effluents

The use of a large number of organic pollutants results in the accumulation of effluents at the places of production and the environment. These substances are, therefore, dangerous for living organisms and can cause heavy environmental damage. Hence, to cure these problems certain methods were used for the elimination of organic effluents. Indeed, the methods of elimination through magnetic adsorption and/or separation prove to be effective in the treatment of certain wastes, but the effectiveness of each one of these methods depends on several characteristics and also present limitations according to the pollutants they adsorb. This review examines on the one hand the capacity of certain elements of these methods in the elimination of certain pollutants and on the other hand the advantages and limits of these methods. Elements like biochars, biosorbents and composite materials are used due to their very strong porosity which makes it possible for them to develop an important contact surface with the external medium, at low costs, and the possibility of producing them from renewable sources. The latter still run up however against the problems of formation of mud and regeneration. Depollution by magnetic separation is also used due to its capacity to mitigate the disadvantages of certain methods which generally lead to the formation of mud and overcoming also the difficulties like obtaining an active material and at the same time being able to fix the pollutants present in the effluents to treat and sensitize them to external magnetic fields.

Neurotensin-loaded PLGA/CNC composite nanofiber membranes accelerate diabetic wound healing

Diabetic foot ulcers (DFUs) are a threat to human health and can lead to amputation and even death. Recently neurotensin (NT), an inflammatory modulator in wound healing, was found to be beneficial for diabetic wound healing. As we demonstrated previously, polylactide-polyglycolide (PLGA) and cellulose nanocrystals (CNCs) (PLGA/CNC) nanofiber membranes show good cytocompatibility and facilitate fibroblast adhesion, spreading and proliferation. PLGA/CNC nanofiber membranes are novel materials that have not been used previously as NT carriers in diabetic wounds. This study aims to explore the therapeutic efficacy and possible mechanisms of NT-loaded PLGA/CNC nanofiber membranes in full-thickness skin wounds in spontaneously diabetic mice. The results showed that NT could be sustained released from NT-loaded PLGA/CNC composite nanofiber membranes for 2 weeks. NT-loaded PLGA/CNC composite nanofiber membranes induced more rapid healing than other control groups. After NT exposure, the histological scores of the epidermal and dermal regeneration and the ratios of the fibrotic area to the whole area were increased. NT-loaded PLGA/CNC composite nanofiber membranes also decreased the expressions of the inflammatory cytokines IL-1β and IL-6. These results suggest that NT-loaded PLGA/CNC composite nanofiber membranes for sustained delivery of NT should effectively promote tissue regeneration for the treatment of DFUs.

Efficiency of resveratrol-loaded sericin nanoparticles: Promising bionanocarriers for drug delivery

Sericin protein nanoparticles are a biocompatible, bio-viable class of nanocarriers gaining prominence in drug delivery system. This research aimed to investigate the suitability fabrication of silk protein (SP) nanoparticles for loading with resveratrol (RSV) via a solventless precipitation technique. The addition of 0.5% (w/v) pluronic surfactant proved optimal for SP nanoparticle fabrication, with obtained nanoparticles being spherical, mono-dispersed and having mean size of approximately 200-400 nm. All exhibited negative surface charges, the extent of which being dependent on the SP concentration, and were non-toxic to normal skin fibroblasts (CRL-2522). Loading of RSV, a promising which poorly soluble multi-targeted anti-oxidative and anti-inflammatory natural polyphenol, into SP nanoparticles proved feasible, with encapsulation levels of 71-75% for 0.6% and 1.0% (w/v) nanoparticle formulations, respectively. Resveratrol-loaded SP nanoparticles strongly inhibited growth of colorectal adenocarcinoma (Caco-2) cells although proved non-cytotoxic to skin fibroblasts, as indicated by cell viability assays. Cellular internalization of SP nanoparticles proved facile and dependent on incubation time; transfection of these carriers, in vitro results indicating sustained release of RSV (over 72 h), and drug solubility enhancements on encapsulation highlight their potential in therapeutic and pharmaceutical applications. Thus, SP nanoparticles is a promising approach to be potential bio-nanocarrier for drug delivery system.

In vitro antiherpes effect of C-glycosyl flavonoid enriched fraction of Cecropia glaziovii encapsulated in PLGA nanoparticles

In this work is reported a novel and promising approach for the preparation of C-glycosylflavonoid enriched fraction of Cecropia glaziovii (EFF-Cg) loaded PLGA nanoparticles (NP) with antiherpes properties. The purpose of this study was to evaluate and to compare the effect of two nonionic surfactants (poloxamer 188 (PLU) and polyvinyl alcohol (PVA)), and also an emulsion stabilized by solid particles of cellulose nanocrystal (CNC) in place of surfactants. The characterization of these nanoparticles was in terms of size, polydispersity index, zeta potential, morphology, thermogravimetric analysis (TGA), loading capacity and percent yield. Since TGA analysis revealed thermo stability especially for NP-PLU, this formulation was selected for the evaluation of drug release profile, cytotoxicity and antiherpes activity. The drug delivery profile demonstrated a sustained release through the polymer structure and a significant reduction of the polymer molecular weight at 21-day period. The cytotoxicity of these nanoparticles was determined on Vero cells, and the selected formulation did not exhibit cytotoxicity even at the highest tested concentration. The results demonstrated a potential antiherpetic effect of the EFF-Cg loaded NP at 48h of testing. In summary, EFF-Cg loaded NP exhibited a promising system for the effective drug delivery in the treatment of herpes infections.

Chitosan nanoparticles for combined drug delivery and magnetic hyperthermia: From preparation to in vitro studies

Chitosan nanoparticles (CSNPs) ionically crosslinked with tripolyphosphate salts (TPP) were employed as nanocarriers in combined drug delivery and magnetic hyperthermia (MH) therapy. To that aim, three different ferrofluid concentrations and a constant 5-fluorouracil (5-FU) concentration were efficiently encapsulated to yield magnetic CSNPs with core-shell morphology. In vitro experiments using normal cells, fibroblasts (FHB) and cancer cells, human glioblastoma A-172, showed that CSNPs presented a dose-dependent cytotoxicity and that they were successfully uptaken into both cell lines. The application of a MH treatment in A-172 cells resulted in a cell viability of 67-75% whereas no significant reduction of cell viability was observed for FHB. However, the A-172 cells showed re-growth populations 4h after the application of the MH treatment when CSNPs were loaded only with ferrofluid. Finally, a combined effect of MH and 5-FU release was observed with the application of a second MH treatment for CSNPs exhibiting a lower amount of released 5-FU. This result demonstrates the potential of CSNPs for the improvement of MH therapies.

Safety of nanosuspensions in drug delivery

Nanosuspension technology is currently undergoing dramatic expansion in pharmaceutical science research and development. However, most of the research efforts generally focus on formulation and potential beneficial description, while the research into potential toxicological effects and implications (i.e., in vivo safety and health effects) is lacking. This review identifies some of the key factors for studying nanosuspension safety and the potential undesired effects related to nanosuspension exposure. The key factors for discussion herein include particle characterization, preparation approach, composition, and excipients of the formulation and sterilization methods. A few comments on the primary and required safety aspects of each administration route are also reviewed.

Continuous-release beads of natural allelochemicals for the long-term control of cyanobacterial growth: Preparation, release dynamics and inhibitory effects

The effects of allelochemicals on cyanobacterial blooms have been observed for more than 20 years; however, the use of these compounds, usually involving a "direct-added" mode, has clear disadvantages, such as a short activity period or temporarily excessive localized concentration. Here, a simulated-allelopathy mode to facilitate the application of allelochemicals was proposed and tested on Microcystis aeruginosa. The continuous-release beads of 5,4'-dihydroxyflavone (DHF) were constitutive of a polymer matrix and showed a high drug-loading rate (47.18%) and encapsulation efficiency (67.65%) with a theoretical release time of approximately 120 d. Cyanobacterial growth tests showed that the DHF beads had long-term inhibition effects (>30 d), whereas those of "direct-added" DHF to cells lasted a maximum of 10 d. The beads also continuously affected the superoxide dismutase, catalase, and lipid peroxidation of M. aeruginosa. The inhibitory effects of DHF beads on cyanobacterial growth increased as initial cell densities of M. aeruginosa decreased, suggesting that the beads inhibit cyanobacterial activity more effectively in the early bloom phase. Consequently, the anti-cyanobacterial beads represent a novel application mode of allelochemicals with long-term inhibitory effects on cyanobacterial growth. Our study demonstrates that the successful application of allelochemicals offers great potential to control harmful cyanobacterial blooms, especially at the initial stage of development.