Adsorption removal of tannic acid from aqueous solution by polyaniline: Analysis of operating parameters and mechanism

Design of pH-responsive molecularly imprinted polymer as a carrier for controlled and sustainable capecitabine release

A molecularly imprinting polymer (MIP) carrier with pH-responsivity was designed to construct a drug delivery system (DDS) focusing on controlled and sustainable capecitabine (CAPE) release. The pH-responsive characteristic was achieved by the functionalization of SiO2 substrate with 4-formylphenylboronic acid, accompanied by the introduction of fluorescein isothiocyanate for the visualization of the intracellular localization of the nanocarrier. Experimental results indicated that CAPE was adsorbed onto the drug carrier with satisfactory encapsulation efficiency. The controlled release of CAPE was realized based on the break of borate ester bonds between -B(OH)2 and cis-diols in the weakly acidic environment. Density functional theory computations were conducted to investigate the adsorption/release mechanism. Moreover, in vitro experiments confirmed the good biocompatibility and ideal inhibition efficiency of the developed DDS. The MIP can act as an eligible carrier and exhibits the great potential in practical applications for tumor treatment.

Highly efficient removal of tannic acid from wastewater using biomimetic porous materials

To effectively remove tannic acid (TA) from wastewater, using green and natural materials has attracted increasing attention. Inspired by Galla Chinensis (GC) with high content of TA, this study synthesized a biomimetic porous adsorbent to mimic the GC structure using dialdehyde tapioca starch (DTS) and gelatin (GL). The TA adsorption performance and mechanism of synthetic porous material were investigated. Results revealed that the porous material exhibited a maximum TA adsorption capacity of 1072.01 mg/g, along with a high removal rate of 95.16% under the conditions of a DTS-GL mass ratio of 1:1, DTS aldehyde content of 48.16%, a solid content of 5%, and a pH of 2 at 25 °C. The adsorption of TA by DTS was not affected by water-soluble cationic and anion. The adsorption kinetics of TA on the porous material followed the pseudo-second-order model, and this Langmuir adsorption model (R2 = 0.9954) which were well described the adsorption of TA by the material, indicating that the adsorption primarily occurred in a monolayer. FTIR, XRD, DSC, TG, XPS, and SEM-EDS were employed to characterize the structure characteristics of the porous material. The cross-linking between DTS and GL by Schiff base reaction imparted a chemical structure could absorb TA by hydrogen bonding. The TA desorption rates of in 30% acetone and 40% ethanol solutions were 88.76% and 91.03%, respectively. The porous material prepared by the GC-inspired approach holds promise as an ideal choice for loading polyphenolic compounds and provides a new perspective for the design and application of bioinspired engineering materials.

Preparation of nanocellulose light porous material adsorbed with tannic acid and its application in fresh-keeping pad

This study fabricated nanocellulose lightweight porous material (TOCNF-G-LPM-TA) as absorbent fresh-keeping pad for meat products, using TEMPO-oxidized cellulose nanofibril (TOCNF) and gelatin as structural skeleton and tannic acid (TA) as antibacterial component of TOCNF lightweight porous material (TOCNF-G-LPM). The adsorption kinetics, capacity and mechanism of TOCNF-G-LPM in different initial concentrations of TA solutions were investigated, the antioxidant and antibacterial properties of TOCNF-G-LPM-TA and its fresh-keeping effect on refrigerated pork at 4 ℃ were studied. Due to strong hydrogen bonding and porous structure, TOCNF-G-LPM exhibited excellent TA adsorption ability (230 mg/g) conforming with pseudo-second-order kinetic and Langmuir isotherm models. TA endowed TOCNF-G-LPM with good antioxidant and antibacterial activities. According to changes in appearance, pH and TVB-N values of pork during storage at 4 ℃, TOCNF-G-LPM-TA effectively extended the shelf life of refrigerated pork. This work provides a facile method for preparing nanocellulose based absorbent fresh-keeping pads.

Application of biological soil crusts for efficient cadmium removal from acidic mine wastewater

Utilizing an acid-resistant biological soil crust (BSC) species that we discovered, we developed a device capable of efficiently removing cadmium (Cd) from mine wastewater with varying levels of acidity. Our research has demonstrated that this particular BSC species adapts to acidic environments by regulating the balance of fatty acids and acid-resistant enzymes. At a Cd concentration of 5 mg/L, the BSC grew well. When the initial Cd concentration was 2 mg/L, and the flow rate was set at 1 mL/min (at pH levels of 3, 4, and 5), BSC had a high removal rate of Cd, and the removal rate increased with the increase of pH (from 90% to 97%). Chemisorption is the primary removal mechanism in the initial stage, where the functional groups and minerals on the surface of the BSC play a significant role. In addition, BSC also adapts to Cd stress by changing bacterial community structure. It was discovered through infrared spectroscopy and two-dimensional correlation analysis that hydrophilic groups, specifically phosphate and carboxyl groups, exhibited the highest reactivity during the Cd binding process. Protein secondary structure analysis confirmed that as the pH increased, the adsorption capacity of the BSC increased; making biofilm formation easier. This study presents a novel approach for the treatment of acidic wastewater.

Development of ultra-high surface area polyaniline-based activated carbon for the removal of volatile organic compounds from industrial effluents

Removing volatile organic compounds (VOCs) from aqueous solutions is critical for reducing VOC emissions in the environment. Activated carbons are widely used for removal of VOCs from water. However, they show less application feasibility and low removal due to less surface area. Here, a cost-effective and high surface area activated carbonized polyaniline (ACP) was synthesized to sustainable removal of VOCs from water. The ACP microstructure, surface properties, and pore structure were investigated using Brunauer-Emmett-Teller (BET) theory, Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The specific surface area of ACP6:1 (2988.13 m2/g) was greater than that of commercial activated carbon (PAC) (1094.49 m2/g), indicating that it has excellent VOC adsorption capacity. The effects of pH, initial VOC concentration, time, temperature, and ionic strength were studied. According to kinetic and thermodynamic studies on VOCs adsorption, it is an exothermic and spontaneous process involving rate-limiting kinetics. Adsorption isotherms follow the Freundlich isotherm model, suggesting that the adsorbent surface is heterogeneous with multilayer adsorption and maximum ACP adsorption capacities of 1913.9, 2453.3, 1635.8, and 3327.0 mg/g at 293 K for benzene, toluene, ethylbenzene, and perchloroethylene, respectively, representing a 3- to 5-fold improvement over PAC. ACP is a promising adsorbent with a high adsorption efficiency for VOC removal.

Photocatalytic performance of PANI modified TiO2: Degradation of refractory organic matter

Surface modification of TiO2 with polyaniline (PANI) conducting polymer has been used to achieve visible light photoresponse, thereby increasing solar photocatalytic activity. In this study, photocatalytic performances of PANI-TiO2 composites with different mole ratios were synthesized by the in situ chemical oxidation polymerization method and tested for the degradation of a model refractory organic matter (RfOM), namely humic acid in an aqueous medium under simulated solar irradiation in a comparative manner. Adsorptive interactions under dark conditions and interactions under irradiation were investigated as contributing factors to photocatalysis. Degradation of RfOM was monitored in terms of UV-vis parameters (Color436, UV365, UV280, and UV254) and fluorescence spectroscopic parameters as well as the mineralization extent by dissolved organic carbon contents. The presence of PANI exerted an enhancement in photocatalytic degradation efficiency compared to pristine TiO2. The synergistic effect was more pronounced in lower PANI ratios whereas higher PANI ratios reflected a retardation effect. Degradation kinetics were assessed by pseudo-first-order kinetic model. For all UV-vis parameters analyzed, highest and lowest rate constants (k) were attained in the presence of PT-14 (2.093 × 10-2 to 2.750 × 10-2 min-1) and PT-81 (5.47 × 10-3 to 8.52 × 10-3 min-1), respectively. Variations in selected absorbance quotients, i.e., A254/A436, A280/A436, and A253/A203, were distinctive and compared with respect to irradiation time and photocatalyst type. Upon use of PT-14, a steady decreasing profile with respect to irradiation time was attained for A253/A203 quotient as 0.76-0.61, followed by a rapid decrease to 0.19 in 120 min. The incorporation effect of PANI into TiO2 composite could be visualized in A280/A365 and A254/A365 quotients exhibiting an almost constant and parallel trend. As a general trend, decrease in the major fluorophoric intensity FIsyn,470 with photocatalysis was observed under extended irradiation conditions; however, an abrupt decline was remarkable in the presence of PT-14 and PT-18. Fluorescence intensity decrease correlated well with spectroscopic evaluation of rate constants. A thorough evaluation of spectroscopic parameters of UV-vis and fluorescence can provide significant information for practical applications in control of RfOM in water treatment.

High-strength, antibacterial, antioxidant, hemostatic, and biocompatible chitin/PEGDE-tannic acid hydrogels for wound healing

Natural polymer hydrogels are widely used in various aspects of biomedical engineering, such as wound repair, owing to their abundance and biosafety. However, the low strength and the lack of function restricted their development and application scope. Herein, we fabricated novel multifunctional chitin/PEGDE-tannic acid (CPT) hydrogels through chemical- and physical-crosslinking strategies, using chitin as the base material, polyethylene glycol diglycidyl ether (PEGDE) and tannic acid (TA) as crosslinking agents, and 90 % ethanol as the regenerative bath. CPT hydrogels maintained a stable three-dimensional porous structure with suitable water contents and excellent biocompatibility. The mechanical properties of hydrogels were greatly improved (tensile stress up to 5.43 ± 1.14 MPa). Moreover, CPT hydrogels had good antibacterial, antioxidant, and hemostatic activities and could substantially promote wound healing in a rat model of full-thickness skin defect by regulating inflammatory responses and promoting collagen deposition and blood vessel formation. Therefore, this work provides a useful strategy to fabricate novel multifunctional CPT hydrogels with excellent mechanical, antibacterial, antioxidant, hemostatic, and biocompatible properties. CPT hydrogels could be promising candidates for wound healing.

Advances in Sorptive Removal of Hexavalent Chromium (Cr(VI)) in Aqueous Solutions Using Polymeric Materials

Sorptive removal of hexavalent chromium (Cr(VI)) bears the advantages of simple operation and easy construction. Customized polymeric materials are the attracting adsorbents due to their selectivity, chemical and mechanical stabilities. The mostly investigated polymeric materials for removing Cr(VI) were reviewed in this work. Assembling of robust functional groups, reduction of self-aggregation, and enhancement of stability and mechanical strength, were the general strategies to improve the performance of polymeric adsorbents. The maximum adsorption capacities of these polymers toward Cr(VI) fitted by Langmuir isotherm model ranged from 3.2 to 1185 mg/g. Mechanisms of complexation, chelation, reduction, electrostatic attraction, anion exchange, and hydrogen bonding were involved in the Cr(VI) removal. Influence factors on Cr(VI) removal were itemized. Polymeric adsorbents performed much better in the strong acidic pH range (e.g., pH 2.0) and at higher initial Cr(VI) concentrations. The adsorption of Cr(VI) was an endothermic reaction, and higher reaction temperature favored more robust adsorption. Anions inhibited the removal of Cr(VI) through competitive adsorption, while that was barely affected by cations. Factors that affected the regeneration of these adsorbents were summarized. To realize the goal of industrial application and environmental protection, removal of the Cr(VI) accompanied by its detoxication through reduction is highly encouraged. Moreover, development of adsorbents with strong regeneration ability and low cost, which are robust for removing Cr(VI) at trace levels and a wider pH range, should also be an eternally immutable subject in the future. Work done will be helpful for developing more robust polymeric adsorbents and for promoting the treatment of Cr(VI)-containing wastewater.

Color removal for large-scale interbasin water transfer: Experimental comparison of five sorption media

The increasing needs of drinking water due to population growth requires seeking for new tap water sources. However, these large-scale tap water sources are oftentimes abundant with dissolved natural organic matter (NOM), such as tannic acid issue causing color in water. If not removed at the source locations beforehand, NOM would impact coagulation and flocculation unit, and/or become precursors to prompt the production of disinfectant by-products after chlorination in drinking water treatment. This study focuses on developing and testing a suite of cost-effective, scalable, adaptable, and sustainable sorption media that can be implemented near the source locations of tap water as a pretreatment option to remove color for a long-distance interbasin transfer. Within the five tested sorption media, a media recipe of Zero-valent-Iron and Perlite based Green Sorption Media (ZIPGEM) with ingredients of 85% sand, 5% clay, 6% zero-valent-iron (ZVI) and 4% perlite by volume stood out as the best option for color removal. Findings showed that ZIPGEM can maintain a color removal of ∼77% for about 14,080 min, maintaining the effluent concentration below 40 Pt-Co units given the influent condition of 175 ± 10 Pt-Co units. A recovery on the adsorption capacity of ZIPGEM was observed around 40,000 min due to synergetic effects among several different ingredients of recycled ZVI, clay, sand, and perlites. ZIPGEM can be applied to industrial wastewater treatment for dye removal as well.

Adsorption of Tannic Acid and Macromolecular Humic/Fulvic Acid onto Polystyrene Microplastics: A Comparison Study

Dissolved organic matter (DOM) has been widely reported to influence the environmental behavior of microplastics (MPs), but little is known about the properties and mechanisms of interaction between specific DOM components and MPs. Here, we studied the adsorption of three representative DOM components (humic acid, HA; fulvic acid, FA; and tannic acid, TA) on polystyrene (PS) MPs in batch adsorption experiments. Results revealed that HA/FA adsorption was greater under acidic conditions, while higher TA adsorption on PS was found at pH 4 and 6. The divalent cation (Ca2+) exerted a more prominent role in enhancing HA, FA, and TA adsorption on PS than did monovalent ones (K+ and Na+). The adsorption process fitted well with the Freundlich isotherm model and the pseudo-second-order kinetics model. The adsorption site heterogeneity was evaluated using the site energy distribution analysis based on the Freundlich model. The greater binding ability of HA on the PS surface caused a more negatively charged surface than FA/TA, as reflected by Zeta potential values. The findings of this study not only provide valuable information about the adsorption behavior and interaction processes of various DOM components on PS MPs, but also aid our efforts to evaluate the environmental behaviors of MPs.

Conductive Polymers and Their Nanocomposites as Adsorbents in Environmental Applications

Proper treatment and disposal of industrial pollutants of all kinds are a global issue that presents significant techno-economical challenges. The presence of pollutants such as heavy metal ions (HMIs) and organic dyes (ODs) in wastewater is considered a significant problem owing to their carcinogenic and toxic nature. Additionally, industrial gaseous pollutants (GPs) are considered to be harmful to human health and may cause various environmental issues such as global warming, acid rain, smog and air pollution, etc. Conductive polymer-based nanomaterials have gained significant interest in recent years, compared with ceramics and metal-based nanomaterials. The objective of this review is to provide detailed insights into different conductive polymers (CPs) and their nanocomposites that are used as adsorbents for environmental remediation applications. The dominant types of CPs that are being used as adsorbent materials include polyaniline (PANI), polypyrrole (Ppy), and polythiophene (PTh). The various adsorption mechanisms proposed for the removal of ODs, HMIs, and other GPs by the different CPs are presented, together with their maximum adsorption capacities, experimental conditions, adsorption, and kinetic models reported.

Species and formation characteristics of halogenated DBPs in chloramination of tannic acid after biodegradation

Tannic acid is widely found in source water and wastewater, and it is also a typical degradation precursor of natural organic matter. In this study, focused on chloramination, the formation characteristics of halogenated DBPs from tannic acid biodegradation products were examined. Fifty-nine polar emerging DBPs (including four nitrogenous DBPs) were detected and forty of them were identified for the first time; meanwhile, their formation pathways were tentatively proposed. In general, much more polar emerging DBPs were formed at the early biodegradation stage than those at the later stage, while commonly observed aliphatic DBPs presented an exactly inverse trend, because initially-formed emerging DBPs can be transformed to those aliphatic DBPs by residual chloramine. Interestingly, while the relative formation level of brominated species in overall halogenated polar emerging DBPs maintained at high level at the later biodegradation stage during chlorination, it decreased significantly later during chloramination. The discrepancy may be due to that hydrolysis effects became dominant at this period in chloramination, whereas DBP formation from the reactions between slow reactive sites and hypohalous acids prevailed in chlorination. In addition, the calculated toxicity drivers among the 21 aliphatic DBPs were found to be haloacetonitriles, although they contribute mildly to the total concentration.

Insights into the adsorption mechanism of tannic acid by a green synthesized nano-hydroxyapatite and its effect on aqueous Cu(II) removal

The polyphenolic tannic acid (TA) has been widely used in the stabilization and surface modification of nanomaterials. The interaction mechanism of TA with the biogenic nano-hydroxyapatite (nHAP) and its environmental importance, however, are poorly understood. This study explored the adsorption of TA using the green synthesized, eggshell-derived nHAP and implications of this process for the removal of aqueous Cu(II) via batch adsorption experiments, Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) investigations. TA adsorption by nHAP was a complex pH-dependent process and significantly correlated with TA molecule speciation and amphoteric properties of nHAP via multiple adsorption modes including surface complexation, electrostatic attraction, and hydrogen bond. The maximum TA adsorption amount was found to be 94.8 mg/g for less crystalline nHAP with lower calcination temperature. In the ternary Cu-TA-nHAP systems, TA promoted Cu(II) adsorption at pH < 5 and reduced Cu(II) uptake at pH > 5. Further studies of the effects of ionic strength and addition sequences, as well as Raman, FTIR, and XPS analyses revealed Cu(II) adsorption on nHAP was mainly dominated by inner-sphere surface complexation. These results can shed light on not only the utility of biogenic nHAP for TA and Cu(II) adsorption but also the evaluation of the effect of TA on the environmental behavior of heavy metals.

Surface modified polythiophene/Al2O3 and polyaniline/Al2O3 nanocomposites using poly(vinyl alcohol) for the removal of heavy metal ions from water: kinetics, thermodynamic and isotherm studies

In this study, polythiophene/Al₂O₃ (PTh/Al₂O₃) and polyaniline/Al₂O₃ (PAn/Al₂O₃) nanocomposites in the presence of poly(vinyl alcohol) (PVA) as the surfactant were synthesized via in situ chemical oxidative polymerization method in aqueous medium. The synthesized nanocomposites were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Results indicated that the Al₂O₃ and poly(vinyl alcohol) influenced the properties of synthesized nanocomposites. The aim of this research was to investigate the sorption characteristics of polythiophene and polyaniline nanocomposites for the removal of heavy metal cations including Pb(II), Zn(II) and Cd(II) from aqueous solution. The factors that affected the adsorption equilibrium as well as the removal efficiency of the nanoadsorbents, i.e., contact time, metal ion concentration, pH and adsorption conditions were investigated in detail. From the kinetic results, it was concluded that the pseudo-second-order kinetic model was found to be the best at describing the adsorption process for Pb(II), Zn(II) and Cd(II) on PTh-PVA/Al₂O₃ and PAn-PVA/Al₂O₃. In addition, thermodynamic analysis suggests the endothermic and spontaneous nature of the present adsorption process with increased entropy on PTh-PVA/Al₂O₃ and PAn-PVA/Al₂O₃. The results suggest polythiophene, polyaniline and their nanocomposites have great potential to be used as efficient absorbent for the removal of heavy metal ions from water.

Cranberry Proanthocyanidins-PANI Nanocomposite for the Detection of Bacteria Associated with Urinary Tract Infections

Consumption of cranberries is associated with the putative effects of preventing urinary tract infections (UTIs). Cranberry proanthocyanidins (PAC) contain unusual double A-type linkages, which are associated with strong interactions with surface virulence factors found on UTI-causing bacteria such as extra-intestinal pathogenic Escherichia coli (ExPEC), depicting in bacterial agglutination processes. In this work, we demonstrated the efficacy of cranberry PAC (200 μg/mL) to agglutinate ExPEC (5.0 × 108 CFU/mL) in vitro as a selective interaction for the design of functionalized biosensors for potential detection of UTIs. We fabricated functionalized screen-printed electrodes (SPEs) by modifying with PAC-polyaniline (PANI) nanocomposites and tested the effectiveness of the PAC-PANI/SPE biosensor for detecting the presence of ExPEC in aqueous suspensions. Results indicated that the PAC-PANI/SPE was highly sensitive (limit of quantification of 1 CFU/mL of ExPEC), and its response was linear over the concentration range of 1-70,000 CFU/mL, suggesting cranberry PAC-functionalized biosensors are an innovative alternative for the detection and diagnosis of ExPEC-associated UTIs. The biosensor was also highly selective, reproducible, and stable.

Removal of arsenate using graphene oxide-iron modified clinoptilolite-based composites: adsorption kinetic and column study

In this study, graphene oxide (GO), iron modified clinoptilolite (FeZ), and composites of GO-FeZ (GOFeZA and GOFeZB) were synthesized and characterized using SEM, EDS, XRF, FTIR, and pHpzc. The arsenate uptake on composites of GOFeZA and GOFeZB was examined by both kinetic and column studies. The adsorption capacity increases with the increase of the initial arsenate concentration at equilibrium for both composites. At the initial arsenate concentration of 450 μg/L, the arsenate adsorption on GOFeZA and GOFeZB was 557.86 and 554.64 μg/g, respectively. Arsenate adsorption on both composites showed good compatibility with the pseudo second order kinetic model. The adsorption process was explained by the surface complexation or ion exchange and electrostatic attraction between GOFeZA or GOFeZB and arsenate ions in the aqueous solution due to the relatively low equilibrium time and fairly rapid adsorption of arsenate at the beginning of the process. The adsorption mechanism was confirmed by characterization studies performed after arsenate was loaded onto the composites. The fixed-bed column experiments showed that the increasing the flow rate of the arsenate solution through the column resulted in a decrease in empty bed contact time, breakthrough time, and volume of treated water. As a result of the continuous operation column study with regenerated GOFeZA, it was demonstrated that the regenerated GOFeZA has lower breakthrough time and volume of treated water compared to fresh GOFeZA.

A platform for functionalization of cellulose, chitin/chitosan, alginate with polydopamine: A review on fundamentals and technical applications

Nature provides concepts and materials with interesting functionalities to be implemented in innovative and sustainable materials. In this review, it is illustrated how the combination of biological macromolecules, i.e. polydopamine and polysaccharides (cellulose, chitin/chitosan, alginate), enables to create functional materials with controlled properties. The mussel-adhesive properties rely on the secretion of proteins having 3,4-dihydroxyphenylalanine amino acid with catechol groups. Fundamental understanding on the biological functionality and interaction mechanisms of dopamine in the mussel foot plaque is presented in parallel with the development of synthetic analogues through extraction or chemical polymer synthesis. Subsequently, modification of cellulose, chitin/chitosan or alginate and their nanoscale structures with polydopamine is discussed for various technical applications, including bio- and nanocomposites, films, filtration or medical membranes, adhesives, aerogels, or hydrogels. The presence of polydopamine stretches far beyond surface adhesive properties, as it can be used as an intermediate to provide additional performance of hydrophobicity, self-healing, antimicrobial, photocatalytic, sensoric, adsorption, biocompatibility, conductivity, coloring or mechanical properties. The dopamine-based 'green' chemistry can be extended towards generalized catechol chemistry for modification of polysaccharides with tannic acid, caffeic acid or laccase-mediated catechol functionalization. Therefore, the modification of polysaccharides with polydopamine or catechol analogues provides a general platform for sustainable material functionalization.

Amino-functionalized mesoporous silica-magnetic graphene oxide nanocomposites as water-dispersible adsorbents for the removal of the oxytetracycline antibiotic from aqueous solutions: adsorption performance, effects of coexisting ions, and natural organic matter

The amino-functionalized mesoporous silica-magnetic graphene oxide nanocomposite (A-mGO-Si) was synthesized and used for oxytetracycline (OTC) removal from water. Various factors like the effects of initial concentration, contact time, and influence of pH were investigated. Selective adsorption experiments in connection with coexisting ions and dissolved organic matter (DOM) were also investigated. In this study, humic acid (HA) and tannic acid (TA) were representative of both hydrophobic and hydrophilic DOM, respectively. Results indicated that A-mGO-Si had an adsorption ability for OTC that was relatively greater than that of virgin magnetic graphene oxide (mGO), graphene oxide (GO), Fe₃O₄ particles, and SBA-15 mesoporous silica and also showed a better uptake removal capacity for OTC at low initial concentration in comparison with the other adsorbents. The adsorption behavior of OTC onto A-mGO-Si could be described by the pseudo-second-order kinetic model and the Freundlich isotherm model. The electrostatic interaction has no influence on the OTC absorbed when the OTC is in an aqueous medium in its zwitterion form (3.22 < pH < 7.46). At high pH, the weak π-π EDA interactions and hydrogen bonding may manifest themselves, hence causing a lower adsorption capacity. The main adsorption mechanisms were plausibly activated by H-bonding, and π-π EDA interactions, while the electrostatic interaction (cation-π interaction) might be the minor adsorption mechanism. Addition of individually exogenous ions (Na⁺, Mg²⁺, NO^-, and CO₃^2-) resulted in a decrease of OTC adsorption due to the emergence of a competitive effect. Considering the presence of HA and TA in mixed solute systems, the DOM was likely to form a stronger interaction system with mGO-Si, thereby resulting in an adsorption level which was more competitive in the process at low aqueous phase concentration of OTC. In contrast to the high aqueous phase, the coexistence of DOM could promote OTC adsorption. The phenomenon may reflect the result that a surface complexation mechanism could achieve in adsorptions.

Preparation of Attapulgite/CoFe2O4 Magnetic Composites for Efficient Adsorption of Tannic Acid from Aqueous Solution

The use of attapulgite (ATP)-based materials for adsorption of pollutants from water and wastewater has received growing attention. However, recovering ATP-based adsorbents remains a challenge. In this study, a magnetic adsorbent ATP/CoFe₂O₄ with high tannic acid (TA) adsorptive capacity was fabricated via a facile co-precipitation approach and was well characterized. The loaded CoFe₂O₄ particles were embedded into the adsorbent surfaces to allow magnetic separability. For this material, its TA adsorption kinetics, isotherm behavior, and magnetic separation efficiency are reported. The developed magnetic composites had rapid sorption kinetics of 3 h, high sorption capacity of 109.36 mg/g, and good magnetic separation efficiency of 80%. The used ATP/CoFe₂O₄ was successfully regenerated by NaOH and reused five times without a substantial reduction in TA removal and magnetic performance. Intermolecular hydrogen bonding formation and surface complexation were identified as the sorption mechanisms of TA by ATP/CoFe₂O₄.

Ultrasonic assisted enhanced adsorption of methyl orange dye onto polyaniline impregnated zinc oxide nanoparticles: Kinetic, isotherm and optimization of process parameters

The fabrication of novel functionalized composite materials as adsorbent is considered to be the core research area in adsorption technology for environmental applications. Indiscriminate disposal of industrial effluents containing toxic dyes has become a serious environmental issue across the globe since last few decades. In view of above, this study focused on the performance evaluation of ZnO/polyaniline nanocomposite (ZnO-PANI-NC) for quick ultrasonic assisted adsorptive remediation of methyl orange dye from aqua matrix. ZnO nanoparticles were fabricated by a simple co-precipitation method and ZnO-PANI-NC was synthesized by in situ oxidative polymerization of aniline monomer in presence of ZnO nanoparticles. The nanocomposite was extensively characterized for its crystalline nature, morphological characteristics, surface chemical bonding, specific surface area and pore volume by employing XRD, SEM, TEM, FTIR, and BET analysis. The ZnO-PANI-NC has shown superior adsorptive performance as compared to pure PANI as well as ZnO nanoparticles and the maximum monolayer adsorption capacity of 240.84 mg/g was obtained for the ZnO-PANI-NC. Under ultrasonic environment the adsorption reaction reached to equilibrium (more than 98% MO dye removal) within 15 min of reaction. Adsorption process followed Langmuir isotherm model and second order kinetic model strictly and contribution of intra-particle diffusion was also observed. The ZnO-PANI-NC has shown its high regeneration ability (more than 86%) even after 5th consecutive cycles of adsorption-desorption. Response surface methodology based optimization was used to optimize the adsorption experimental data and maximum MO removal of 99.12% was observed at optimum sonication time 13 min, adsorbent dose 0.38 g/L and initial MO concentration at 28 mg/L.

Tannic acid for remediation of historically arsenic-contaminated soils

Soil washing effectively and permanently decreases soil pollution. Thus, it can be considered for the removal of the most toxic elements, for example arsenic (As). In this study, historically As-contaminated soils (2041-4294 mg/kg) were remediated with tannic acid (TA) as the washing agent. The scope of this study included optimization of the operational conditions of As removal, determination of As distribution in soil before and after double soil washing, and measurement of TA loss during washing. The optimum conditions for As removal were 4% TA, pH 4 and 24 h washing time. The average As removal after single and double washings was 38% and 63%, respectively. TA decreased As content in amorphous and poorly crystalline oxides by >90%. Although TA increased the amount of As in the easily mobilizable As fraction, the stability of As in washed soils increased, with reduced partition indexes of 0.52-0.66 after washing. The maximum capacity of the soils to adsorb TA (q_max) was 50.2-70.4 g C/kg. TA sorption was higher at alkaline than at acidic conditions. Only TA removes As from soils effectively if the proportion of As in amorphous and poorly crystalline oxides is high. Thus, it can be considered for remediation of historically contaminated soils.

Oxidative Degradation of Tannic Acid in Aqueous Solution by UV/S2O82− and UV/H2O2/Fe2+ Processes: A Comparative Study

Tannic acid (TA) is a major pollutant present in the wastewater generated from vegetable tanneries process and food processing. This work studied TA degradation by two advanced oxidation processes (APOs): UV irradiation at the wavelength of 254 nm in the presence of hydrogen peroxide (H2O2) and ferrous iron (photo-Fenton) and in the presence of potassium persulfate. The influence of certain experimental parameters such as K2S2O8, H2O2, Fe2+, and TA concentrations, initial pH and temperature was evaluated in order to obtain the highest efficiency in terms of aromatics (decay in UV absorbance at 276 nm) and TOC removals. Chemical oxidation of TA (0.1 mM) by UV/persulfate achieved 96.32% of aromatics removal and 54.41% of TOC removal under optimized conditions of pH = 9 and 53.10 mM of K2S2O8 after 60 min. The treatment of TA by photo-Fenton process successfully led to almost complete aromatics removal (99.32%) and high TOC removal (94.27%) from aqueous solutions containing 0.1 mM of TA at natural pH = 3 using 29.4 mM of H2O2 and 0.18 mM of Fe2+ at 25 °C after 120 min. More efficient degradation of TA by photo-Fenton process than UV/persulfate was obtained, which confirms that hydroxyl radicals are more powerful oxidants than sulfate radicals. The complete removal of organic pollution from natural waters can be accomplished by direct chemical oxidation via hydroxyl radicals generated from photocatalytic decomposition of H2O2.

Optimization and modeling of methyl orange adsorption onto polyaniline nano-adsorbent through response surface methodology and differential evolution embedded neural network

Presence of pigments and dyes in water bodies are growing tremendously and pose as toxic materials and have severe health effects on human and aquatic creatures. Treatments methods for removal of these toxic dyes along with other pollutants are growing in different dimensions, among which adsorption was found a cheaper and efficient method. In this study, the performance of polyaniline-based nano-adsorbent for removal of methyl orange (MO) dye from wastewater in a batch adsorption process is studied. Along with this to minimize the number of experiments and obtain optimal conditions, a multivariate predictive model based on response surface methodology (RSM) is developed. This is compared with data-driven modeling using the artificial neural network (ANN) which is integrated with differential evolution optimization (DEO) for prediction of the adsorption of MO. The interactive effects on MO removal efficiency with respect to independent process variables were investigated. The fit of the predictive model was found to good enough with R² = 0.8635. The optimal ANN architecture with 5-12-1 topology resulted in higher R² and lower RMSE of 0.9475 and 0.1294 respectively. Pearson's Chi-square measure which provides a good measurement scale for weighing the goodness of fit is found to be 0.005 and 0.038 for RSM and ANN-DEO respectively, and other statistical metrics evaluated in this study further confirms that the ANN-DEO is very superior over RSM for model predictions.

Synthesis of mesoporous bismuth-impregnated aluminum oxide for arsenic removal: Adsorption mechanism study and application to a lab-scale column

High mobility and toxicity of arsenic [As (III)] limit its removal from an aquatic environment and pose a threat to human health. In this work, batch adsorption experiments were conducted to investigate the adsorption capacity of bismuth-impregnated aluminum oxide (BiAl). Continuous application of As (III) removal was achieved via a lab-scale column reactor. Bismuth impregnation decreased the specific surface area of aluminum oxide and affected its pore size distribution. However, because of its abundant and well-proportioned mesoporous character, it also enhanced its adsorption capacity through the surface complexation of As (III). Batch adsorption experiments demonstrated a suitable Freundlich model and a fitted pseudo-second-kinetic model for As (III) adsorption. The main mechanism was chemisorption with both bismuth and aluminum atoms; however, physisorption also contributed to arsenic adsorption at the initial stage of the reaction. The Adams-Bohart model better described the breakthrough curves than the Thomas model. BiAl exhibited efficient As (III) adsorption over a wide pH range and could be applied to As (III) removal from wastewater. A high As (III) removal efficiency (91.6%) was obtained at an initial As (III) concentration of 5 mg L^-1 at a flow rate of 1 mL min^-1. This study indicates the potential for the practical application of BiAl in As (III) removal.

Arsenic removal by periphytic biofilm and its application combined with biochar

A biochar and periphyton-based system (BPS) comprising of a biochar column and a periphyton bioreactor was designed to avoid the toxicity issue associated with removing As(III) from wastewater. Results showed that the periphyton can grow when As(III) is less than 5.0mgL^-1. The BPS obtained a high As(III) removal rate (∼90.2-95.4%) at flow rate=1.0mLmin^-1 and initial concentration of As(III)=2.0mgL^-1. About 60% of the As(III) was pre-treated (adsorbed) in the biochar column and the removal of the remaining As(III) was attributed to the periphyton bioreactor. The As(III) removal process by periphytic biofilm in the initial stage fits a pseudo-second-kinetic model. The calcite in the periphytic biofilm surfaces and the OH and CO groups were responsible for the As(III) removal. This study indicates the feasibility of the BPS for As(III) removal in practice.

Co-immobilization of 1-vinyl-3-octadecylimidazolium cations and p-styrenesulphonate anions on silica and their anti-interference performance for the adsorption of naphthols

Adsorptive removals of naphthols are often interfered by some coexisting anions of aqueous solutions.

An insertion/self-fusion mechanism for cell membrane immobilization on porous silica beads to fabricate biomimic carriers

An insertion/self-fusion mechanism for cell membrane immobilization on porous silica beads has been proposed to fabricate biomimic carriers.