Temperature dependent photocatalysis of g-C3N4, TiO2 and ZnO: Differences in photoactive mechanism

Carbon dots decorated cadmium sulfide nanomaterials for boosting photocatalytic activity for ciprofloxacin degradation

This study investigates the utilization of carbon dots (CDs) from neem leaves (Azadirachta indica) decorated onto cadmium sulfide (CdS) for the photocatalytic degradation of ciprofloxacin. A comparative study of ciprofloxacin degradation with pristine CdS and CD decorated CdS demonstrated high degradation of ∼ 75 % with CD/CdS when compared to bare CdS (∼68 %). Process optimization studies were further carried out with CD/CdS catalysts at different solution pH (4-10), feed concentrations (10-50 mg/L), catalyst loadings (25-125 mg/L), temperatures (10 - 30 °C), and lamp power (25, 50, 250 W and sunlight). Higher temperatures, combined with a solution pH of 7 and catalyst loading of 100 mg/L favored the enhanced degradation of 20 mg/L of ciprofloxacin. The ciprofloxacin degradation rate increased linearly with temperature with an apparent activation energy of 27 kJ mol-1. The CD/CdS photocatalyst demonstrated maximum degradation rates with higher lamp powers while it also showed remarkable performance under natural sunlight achieving the same degradation within 3 h.

Temperature-driven journey of dark excitons to efficient photocatalytic water splitting in β-AsP

Limited availability of photogenerated charge carriers in two-dimensional (2D) materials, due to high exciton binding energies, is a major bottleneck in achieving efficient photocatalytic water splitting (PWS). Strong excitonic effects in 2D materials demand precise attention to electron-electron correlation, electron-hole interaction and electron-phonon coupling simultaneously. In this work, we explore the temperature-dependent electronic and optical responses of an efficient photocatalyst, blue-AsP (β-AsP), by integrating electron-phonon coupling into state-of-the-art GW + BSE calculations. Interestingly, strong electron-lattice interaction at high temperature promotes photocatalytic water splitting with an increasing supply of long-lived dark excitons. This work presents an atypical observation contrary to the general assumption that only bright excitons enhance the PWS due to prominent absorption. Dark excitons, due to the low recombination rate, exhibit long-lived photogenerated electron-hole pairs with high exciton lifetime increasing with temperature up to ∼0.25 μs.

Tuning Biocompatibility and Bactericidal Efficacy as a Function of Doping of Gold in ZnO Nanocrystals

Doping nanoparticles represents a strategy for modulating the energy levels and surface states of nanocrystals (NCs), thereby enhancing their efficiency and mitigating toxicity. Thus, we herein focus on the successful synthesis of pure and gold (Au)-doped zinc oxide (ZnO) nanocrystals (NCs), investigating their physical-chemical properties and evaluating their applicability and toxicity through in vitro and in vivo assessments. The optical, structural, and photocatalytic characteristics of these NCs were scrutinized by using optical absorption (OA), X-ray diffraction (XRD), and methylene blue degradation, respectively. The formation and doping of the NCs were corroborated by the XRD and OA results. While the introduction of Au as a dopant did induce changes in the phase and size of ZnO, a high concentration of Au ions in ZnO led to a reduction in their photocatalytic activity. This demonstrated a restricted antibacterial efficacy against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. Remarkably, Au-doped counterparts exhibited enhanced biocompatibility in comparison to ZnO, as evidenced in both in vitro (murine macrophage cells) and in vivo (Drosophila melanogaster) studies. Furthermore, confocal microscopy images showed a high luminescence of Au-doped ZnO NCs in vivo. Thus, this study underscores the potential of Au doping of ZnO NCs as a promising technique to enhance material properties and increase biocompatibility.

Piezo-catalysis in BiFeO3@In2Se3 Heterojunction for High-Efficiency Uranium Removal

Piezo-catalysis emerges as an efficient, safe, and affordable strategy for removing hazardous substances from aquatic environments. Here, the BiFeO3@In2Se3 heterojunction demonstrates remarkable prowess as a piezo-catalyst, enabling the high-efficiency removal of uranium (U) from U(VI)-containing water. A total U(VI) removal efficiency of 94.6% can be achieved under ultrasonic vibration without any sacrificial agents. During the entire catalytic process, piezo-induced electrons, hydroxyl radicals, and superoxide radicals play important roles in U(VI) removal, while the generated H2O2 is responsive to the transformation of soluble U(VI) into insoluble (UO2)O2•2H2O and UO3. Furthermore, auxiliary illumination can accelerate the increase of free charges, enabling the piezo-catalyst to retain more charges. This leads to an improved U(VI) removal efficiency of 98.8% and a significantly increased reaction rate constant. This study offers a comprehensive analysis of the fabrication of high-efficiency piezo-catalysts in the removal or extraction of U(VI) from U(VI)-containing water.

Recent advances in visible light-activated photocatalysts for degradation of dyes: A comprehensive review

The rapid development in industrialization and urbanization coupled with an ever-increasing world population has caused a tremendous increase in contamination of water resources globally. Synthetic dyes have emerged as a major contributor to environmental pollution due to their release in large quantities into the environment, especially owing to their high demand in textile, cosmetics, clothing, food, paper, rubber, printing, and plastic industries. Photocatalytic treatment technology has gained immense research attention for dye contaminated wastewater treatment due to its environment-friendliness, ability to completely degrade dye molecules using light irradiation, high efficiency, and no generation of secondary waste. Photocatalytic technology is evolving rapidly, and the foremost goal is to synthesize highly efficient photocatalysts with solar energy harvesting abilities. The current review provides a comprehensive overview of the most recent advances in highly efficient visible light-activated photocatalysts for dye degradation, including methods of synthesis, strategies for improving photocatalytic activity, regeneration and their performance in real industrial effluent. The influence of various operational parameters on photocatalytic activity are critically evaluated in this article. Finally, this review briefly discusses the current challenges and prospects of visible-light driven photocatalysts. This review serves as a convenient and comprehensive resource for comparing and studying the fundamentals and recent advancements in visible light photocatalysts and will facilitate further research in this direction.

Photocatalysis Based on Metal Halide Perovskites for Organic Chemical Transformations

Heterogeneous photocatalysts incorporating metal halide perovskites (MHPs) have garnered significant attention due to their remarkable attributes: strong visible-light absorption, tuneable band energy levels, rapid charge transfer, and defect tolerance. Additionally, the promising optical and electronic properties of MHP nanocrystals can be harnessed for photocatalytic applications through controlled crystal structure engineering, involving composition tuning via metal ion and halide ion variations, dimensional tuning, and surface chemistry modifications. Combination of perovskites with other materials can improve the photoinduced charge separation and charge transfer, building heterostructures with different band alignments, such as type-II, Z-scheme, and Schottky heterojunctions, which can fine-tune redox potentials of the perovskite for photocatalytic organic reactions. This review delves into the activation of organic molecules through charge and energy transfer mechanisms. The review further investigates the impact of crystal engineering on photocatalytic activity, spanning a diverse array of organic transformations, such as C-X bond formation (X = C, N, and O), [2 + 2] and [4 + 2] cycloadditions, substrate isomerization, and asymmetric catalysis. This study provides insights to propel the advancement of metal halide perovskite-based photocatalysts, thereby fostering innovation in organic chemical transformations.

Integrated adsorption and photocatalytic degradation based removal of ciprofloxacin and sulfamethoxazole antibiotics using Fc@rGO-ZnO nanocomposite in aqueous systems

Ferrocene functionalized rGO-ZnO nanocomposite was synthesized via the facile hydrothermal method. ZnO was reduced over the 3-dimensional rGO framework (3D-Fc@rGO) using Camellia sinensis extract. The Fc@rGO-ZnO nanocomposite was employed for pharmaceutical degradation (sulfamethoxazole (SMX) and ciprofloxacin (CIP)) in an aqueous solution under UV C light. The physicochemical properties of the as-prepared photocatalyst were characterized using FTIR, XRD, FESEM, EDS mapping, HR-TEM, XPS, and DR-UV Vis. The as-synthesized Fc@rGO-ZnO photocatalyst performed remarkably against pristine ZnO, with a fivefold increase in removal efficiency. This superior activity was attributed to its improved light harvesting, charge carrier interface, and enhanced charge separation. Additionally, the photocatalyst obeyed the Lagergen model for pseudo-first-order kinetics. Congruously, the integrated approach of Fc@rGO and ZnO as oxidizing agents was proficient in removing >95% of antibiotics (CIP and SMX) within 180 min. Furthermore, the heterostructure configuration developed between Fc@rGO and ZnO helps in charge migration and generation of abundant •OH and •O₂^- radicals for photodegradation activities. The toxicity assessment of the treated solutions showed improved cell viability in the algal strains of Scenedesmus and Chlorella sp. Moreover, this novel approach for the synthesis of a photoactive nanocomposite is found to be low-cost and reusable for three cycles. The nanocomposite is environmentally sustainable paving the way for practical applications in the treatment of different classes of antibiotics.

Achieving improved full-spectrum responsive 0D/3D CuWO4/BiOBr:Yb3+,Er3+ photocatalyst with synergetic effects of up-conversion, photothermal effect and direct Z-scheme heterojunction

The key to obtain effective photocatalysts is to increase the efficiency of light energy conversion, and thus the design and implementation of full-spectrum photocatalysts is a potential approach to solve this problem especially by extending the absorption range to near-infrared (NIR) light. Herein, the improved full-spectrum responsive CuWO₄/BiOBr:Yb³⁺,Er³⁺ (CW/BYE) direct Z-scheme heterojunction was prepared. The CW/BYE with CW mass ratio of 5% had the best degradation performance, and the removal rate of tetracycline reached 93.9% in 60 min and 69.4% in 12 h under visible (Vis) and NIR light, respectively, which were 5.2 and 3.3 times of BYE. According to the outcome of experimental, the reasonable mechanism of improved photoactivity was put forward on the basis of (i) the up-conversion (UC) effect of Er³⁺ ion to convert NIR photon to ultraviolet or visible light, which can be used by CW and BYE, (ii) the photothermal effect of CW to absorb the NIR light, increasing the local temperature of photocatalyst particle to accelerate the photoreaction, and (iii) the formed direct Z-scheme heterojunction between BYE and CW to boost the separation of photogenerated electron-hole pairs. Additionally, the excellent photostability of the photocatalyst was verified by cycle degradation experiments. This work opens up a promising technique for designing and synthesizing full-spectrum photocatalysts by utilizing synergetic effects of UC, photothermal effect and direct Z-scheme heterojunction.

Visible-light-driven photocatalytic degradation of tetracycline hydrochloride by Z-scheme Ag3PO4/1T@2H-MoS2 heterojunction: Degradation mechanism, toxicity assessment, and potential applications

Residual antibiotics in wastewater threaten living organisms and the ecosystem, while the photocatalytic process is recognized as one of the most eco-friendly and promising technologies for the treatment of antibiotic wastewater. In this study, a novel Z-scheme Ag₃PO₄/1T@2H-MoS₂ heterojunction was synthesized, characterized, and used for the visible-light-driven photocatalytic degradation of tetracycline hydrochloride (TCH). It was found that Ag₃PO₄/1T@2H-MoS₂ dosage and coexisting anions had significant effects on the degradation efficiency, which could reach up to 98.9 % within 10 min under the optimal condition. Combing experiments and theoretical calculations, the degradation pathway and mechanism were thoroughly investigated. The excellent photocatalytic property of Ag₃PO₄/1T@2H-MoS₂ was achieved attributed to the Z-scheme heterojunction structure, which remarkably inhibited the recombination of photoinduced electrons and holes. The potential toxicity and mutagenicity for TCH and generated intermediates were evaluated, which revealed the ecological toxicity of antibiotic wastewater was reduced effectively during the photocatalytic degradation process.

Interface engineering of sandwich SiO@α-FeO@COF core-shell S-scheme heterojunctions for efficient photocatalytic oxidation of gas-phase HS

Hydrogen sulfide (H₂S) is considered to be a broad-spectrum toxicant, and it is crucial to address this problem due to its serious health and climate change impacts. Photocatalysis can be effectively applied for the reduction of H₂S molecules to S and other products. We synthesized sandwich-structured composite materials with internally immobilized SiO₂ nanospheres and externally wrapped COF layers co-modified with iron oxide nanoparticles. Furthermore, originally looked at the efficiency of photocatalysis in reducing hydrogen sulfide to sulfur. In this paper, a sandwich structure of core-shell composite photocatalysts based on SiO₂ was prepared by a multi-step method including Stöber and double ligand-regulated solvent heat, and these sandwich core-shell structures exhibited high hydrogen sulfide reduction and stability in applications. In addition, characterization, degradation studies, active substance trapping studies, and energy band structure analysis showed that S-type heterojunctions could effectively increase photo-generated carrier separation. This research advanced knowledge of photocatalytic hydrogen sulfide reduction and offered a novel approach for catalysts in COF sandwich core-shell structures.

Polypyrrole modification on BiVO4 for photothermal-assisted photoelectrochemical water oxidation

The bismuth vanadate (BiVO₄) photoanode receives extensive attention in photoelectrochemical (PEC) water splitting. However, the high charge recombination rate, low electronic conductivity, and sluggish electrode kinetics have inhibited the PEC performance. Increasing the reaction temperature for water oxidation is an effective way to enhance the carrier kinetics of BiVO₄. Herein, a polypyrrole (PPy) layer was coated on the BiVO₄ film. The PPy layer could harvest the near-infrared light to elevate the temperature of the BiVO₄ photoelectrode and further improve charge separation and injection efficiencies. In addition, the conductive polymer PPy layer acted as an effective charge transfer channel to facilitate photogenerated holes moving from BiVO₄ to the electrode/electrolyte interface. Therefore, PPy modification led to a significantly improved water oxidation property. After loading the cobalt-phosphate co-catalyst, the photocurrent density reached 3.64 mA cm^-2 at 1.23 V vs the reversible hydrogen electrode, corresponding to an incident photon-to-current conversion efficiency of 63% at 430 nm. This work provided an effective strategy for designing a photothermal material assisted photoelectrode for efficient water splitting.

Enhanced photocatalytic organic pollutant degradation and H2 evolution reaction over carbon nitride nanosheets: N defects abundant materials

Post thermal treatment of bulk graphitic carbon nitride (g-C₃N₄) by ammonia gas acts as a significant structure regulation approach, while pure ammonia-assisted g-C₃N₄ synthesis from precursors like melamine is rarely investigated. Here we prove the synthesis of N-defects abundant carbon nitride nanosheets (ACN) through a one-pot thermal polymerization of melamine in pure ammonia gas, for photocatalytic organic pollutant removal in water and H₂ evolution applications. Compared to bulk g-C₃N₄ (BCN), ACN-550 (ACN prepared at 550 °C) exhibited thin-layered porous morphology with higher surface area and abundant N defects, resulting in wider distribution of active sites. Moreover, the abundant N defects in the heptazine heterocycle structure could change the electronic structure of g-C₃N₄, leading to more efficient transport of photogenerated charge carriers and enhanced photoreduction potential, which gives rise to notable improvement activities in photocatalytic reaction. With superoxide ion radical and photoinduced holes as the predominant reactive species, ACN-550 realized efficient photocatalytic bisphenol A (BPA) degradation, which is 1.6- and 4.7-fold high over commercial TiO₂ (P25) and BCN, respectively. ACN-550 exhibited excellent reusability and stability in five consecutive photocatalytic BPA degradation tests. In photo-reductive H₂ production system by ACN-550, 761.8 ± 4.3 μmol/h/g H₂ was produced, which was 11.6-fold as high as that by BCN.

Enhance ZnO Photocatalytic Performance via Radiation Modified g-C3N4

Environmental pollution, especially water pollution, is becoming increasingly serious. Organic dyes are one type of the harmful pollutants that pollute groundwater and destroy ecosystems. In this work, a series of graphitic carbon nitride (g-C3N4)/ZnO photocatalysts were facilely synthesized through a grinding method using ZnO nanoparticles and g-C3N4 as the starting materials. According to the results, the photocatalytic performance of 10 wt.% CN-200/Z-500 (CN-200, which g-C3N4 was 200 kGy, referred to the irradiation metering. Z-500, which ZnO was 500 °C, referred to the calcination temperature) with the CN-200 exposed to electron beam radiation was better than those of either Z-500 or CN-200 alone. This material displayed a 98.9% degradation rate of MB (20 mg/L) in 120 min. The improvement of the photocatalytic performance of the 10 wt.% CN-200/Z-500 composite material was caused by the improvement of the separation efficiency of photoinduced electron-hole pairs, which was, in turn, due to the formation of heterojunctions between CN-200 and Z-500 interfaces. Thus, this study proposes the application of electron-beam irradiation technology for the modification of photocatalytic materials and the improvement of photocatalytic performance.

Influences of different carbon substrates on the morphologies of carbon/g-C3N4 photocatalytic composites and the purification capacities of different composites in the weak UV underwater environment

In order to explore the influence of various carbon introduction on the morphology and photodegradation performance of C/g-C₃N₄ composites, three kinds of different carbon materials: carbon nanotubes (CNT), graphene (GN) and carbon fibers (CF) were introduced to modify g-C₃N₄, and the morphologies, light absorption capacities and the underwater purifications of the composite photocatalysts were investigated. Results showed that the composites synthesized with different carbon substrates shows great differences in growth morphology. In addition, the introduction of various carbon sources also has a great impact on the physical and chemical properties of the composites. Compared with GN/g-C₃N₄ and CF/g-C₃N₄, CNT/g-C₃N₄ shows strong light absorption ability, especially in long-wavelength region (570-660 nm). To further study the difference of degradation ability of the composites in the underwater environment, the purification performance of modified g-C₃N₄ at different water depths were carried out. The results show that under 40 cm of water, where the light intensity and ultra violet spectral are seriously attenuated, the purification efficiency of CNT/g-C₃N₄ at 40 cm is 3.35 times than that of g-C₃N₄. This work provides insight in the design of highly efficient metal-free photocatalysts for the environmental remediation.

Temperature Control of Yellow Photoluminescence from SiO2-Coated ZnO Nanocrystals

In this study, we aimed to elucidate the effects of temperature on the photoluminescence from ZnO-SiO₂ nanocomposite and to describe the preparation of SiO₂-coated ZnO nanocrystals using a chemical precipitation method, as confirmed by Fourier transform infrared (FTIR) and powder X-ray diffraction analysis (XRD) techniques. Analyses using high-resolution transmission microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), and electrophoretic light scattering (ELS) techniques showed that the new nanocomposite has an average size of 70 nm and 90% silica. Diffuse reflectance spectroscopy (DRS), photoluminescence (PL), and photoluminescence-excitation (PLE) measurements at different temperatures revealed two emission bands at 385 and 590 nm when the nanomaterials were excited at 325 nm. The UV and yellow emission bands were attributed to the radiative recombination and surface defects. The variable-temperature, time-resolved photoluminescence (VT-TRPL) measurements in the presence of SiO₂ revealed the increase in the exciton lifetime values and the interplay of the thermally induced nonradiative recombination transfer of the excited-state population of the yellow emission via deep centers (DC). The results pave the way for more applications in photocatalysis and biomedical technology.

Photocatalytic Reduction of Hexavalent Chromium Using Cu3.21Bi4.79S9/g-C3N4 Nanocomposite

The photocatalytic reduction of hexavalent chromium, Cr(VI), to the trivalent species, Cr(III), has continued to inspire the synthesis of novel photocatalysts that are capable of achieving the task of converting Cr(VI) to the less toxic and more useful species. In this study, a novel functionalized graphitic carbon nitride (Cu3.21Bi4.79S9/gC3N4) was synthesized and characterized by using X-ray diffraction (XRD), thermogravimetry analysis (TGA), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), and scanning electron microscope (SEM). The composite was used for the photocatalytic reduction of hexavalent chromium, Cr(VI), under visible light irradiation. A 92.77% efficiency of the reduction was achieved at pH 2, using about 10 mg of the photocatalyst and 10 mg/L of the Cr(VI) solution. A pseudo-first-order kinetic study indicated 0.0076 min−1, 0.0286 min−1, and 0.0393 min−1 rate constants for the nanoparticles, pristine gC3N4, and the nanocomposite, respectively. This indicated an enhancement in the rate of reduction by the functionalized gC3N4 by 1.37- and 5.17-fold compared to the pristine gC3N4 and Cu3.21Bi4.79S9, respectively. A study of how the presence of other contaminants including dye (bisphenol A) and heavy-metal ions (Ag(I) and Pb(II)) in the system affects the photocatalytic process showed a reduction in the rate from 0.0393 min−1 to 0.0019 min−1 and 0.0039 min−1, respectively. Finally, the radical scavenging experiments showed that the main active species for the photocatalytic reduction of Cr(VI) are electrons (e−), hydroxyl radicals (·OH−), and superoxide (·O2−). This study shows the potential of functionalized gC3N4 as sustainable materials in the removal of hexavalent Cr from an aqueous solution.

Photothermal Suzuki Coupling Over a Metal Halide Perovskite/Pd Nanocube Composite Catalyst

The development of improved catalysts capable of performing the Suzuki coupling reaction has attracted considerable attention. Recent findings have shown that the use of photoactive catalysts improves the performance, while the reaction mechanism and temperature-dependent performance of such systems are still under debate. Herein, we report Pd nanocubes/CsPbBr₃ as an efficient catalyst for the photothermal Suzuki reaction. The photo-induced and thermal contribution to the overall catalytic performance has been investigated. Light controls the activity at temperatures around and below 30 °C, while thermal catalysis determines the reactivity at higher temperatures. The Pd/CsPbBr₃ catalyst exhibits 11 times higher activity than pure CsPbBr₃ at 30 °C due to reduced activation barrier and facilitated charge carrier dynamics. Furthermore, the alkoxide radicals (R-O^-) for the Suzuki reaction are experimentally and theoretically confirmed, and photogenerated holes are proven to be crucial for cleaving C-B bonds of phenylboronic acids to drive the reaction. This work prescribes a general strategy to study photothermal catalysis and offers a mechanistic guideline for photothermal Suzuki reactions.

2D/3D S-scheme heterojunction of carbon nitride/iodine-deficient bismuth oxyiodide for photocatalytic hydrogen production and bisphenol A degradation

A novel 2D/3D S-scheme carbon nitride/iodine-deficient bismuth oxyiodide (g-C₃N₄/BiO_1.2I_0.6) heterojunction was constructed for the first time by calcining a mixture of g-C₃N₄ nanosheets and flower-like BiOI. Irradiated by visible light, this g-C₃N₄/BiO_1.2I_0.6 heterojunction exhibited excellent photocatalytic hydrogen production and BPA degradation activity with high cycle stability. In particular, the photocatalytic activity of 0.2-C₃N₄/BiO_1.2I_0.6 could reach 1402.7 μmol g^-1 h^-1 (hydrogen production rate) and 0.01155 min^-1 (apparent rate of bisphenol A degradation), which were 3.5 and 3.2 times that of g-C₃N₄ respectively. The remarkable photocatalytic performance was due to the efficient charge separation of g-C₃N₄/BiO_1.2I_0.6 and the formation of S-scheme heterojunction, which maintained strong photocatalytic reduction and oxidation potentials. Noticeably, the charge density difference and band offsets of the g-C₃N₄/BiO_1.2I_0.6 were calculated. The results revealed that a built-in electric field (IEF) was created. The values of the valence band offset (ΔE_VBO) and the conduction band offset (ΔE_CBO) were -0.84 and -1.27 eV, respectively, which further demonstrated the formation of S-scheme photocatalytic charge transfer mechanism.

Synthesis of bismuth oxyhalide (BiOBrzI(1-z)) solid solutions for photodegradation of methylene blue dye

Background: The removal of textile wastes is a priority due to their mutagenic and carcinogenic properties.  In this study, bismuth oxyhalide was used in the removal of methylene blue (MB) which is a textile waste. The main objective of this study was to develop and investigate the applicability of a bismuth oxyhalide (BiOBr _zI _(1-z)) solid solutions in the photodegradation of MB under solar and ultraviolet (UV) light irradiation.

Methods: Bismuth oxyhalide (BiOBr _zI _(1-z)) (0 ≤ z ≤ 1) materials were successfully prepared through the hydrothermal method. Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), X-ray diffractometer (XRD), and scanning electron microscope (SEM) were used to determine the surface area, microstructure, crystal structure, and morphology of the resultant products. The photocatalytic performance of BiOBr _zI _(1-z) materials was examined through methylene blue (MB) degradation under UV light and solar irradiation.

Results: The XRD showed that BiOBr _zI _(1-z) materials crystallized into a tetragonal crystal structure with (102) peak slightly shifting to lower diffraction angle with an increase in the amount of iodide (I ^-). BiOBr _0.6I _0.4 materials showed a point of zero charge of 5.29 and presented the highest photocatalytic activity in the removal of MB with 99% and 88% efficiency under solar and UV irradiation, respectively. The kinetics studies of MB removal by BiOBr _zI _(1-z) materials showed that the degradation process followed nonlinear pseudo-first-order model indicating that the removal of MB depends on the population of the adsorption sites. Trapping experiments confirmed that photogenerated holes (h ⁺) and superoxide radicals ( ^•O ₂⁻) are the key species responsible for the degradation of MB.

Conclusions: This study shows that bismuth oxyhalide materials are very active in the degradation of methylene blue dye using sunlight and thus they have great potential in safeguarding public health and the environment from the dye’s degradation standpoint. Moreover, the experimental results agree with nonlinear fitting.

Ceramized Fabrics and Their Integration in a Semi-Pilot Plant for the Photodegradation of Water Pollutants

The use of nano-photocatalysts for the water/wastewater purifications, particularly in developing regions, offers promising advantages over conventional technologies. TiO2-based photocatalysts deposited on fabrics represent an efficient solution for obtaining heterogeneous photocatalysts, which are easily adaptable in the already installed water treatment plants or air purification systems. Despite the huge effort spent to develop and characterize novel nano-photocatalysts, which are especially active under solar light, knowledge gaps still persist for their full-scale application, starting from the reactor design and scale-up and the evaluation of the photocatalytic efficiency in pre-pilot scenarios. In this study, we offered easily scalable solutions for adapting TiO2-based photocatalysts, which are deposited on different kinds of fabrics and implemented in a 6 L semi-pilot plant, using the photodegradation of Rhodamine B (RhB) as a model of water pollution. We took advantage of a multi-variable optimization approach to identify the best design options in terms of photodegradation efficiency and turnover frequency (TOF). Surprisingly, in the condition of use, the irradiation with a light-emitting diode (LED) visible lamp appeared as a valid alternative to the use of UV LED. The identification of the best design options in the semi-pilot plant allowed scaling up the technology in a 100 L pilot plant suitable for the treatment of industrial wastewater.

Efficient degradation of tetracycline hydrochloride by photocatalytic ozonation over Bi2WO6

Photocatalytic ozonation technique for wastewater treatment has received much attention for their efficient capability in the mineralization of persistent organic pollutants. In this study, nanostructured Bi₂WO₆ was prepared by hydrothermal method and applied in the photocatalytic ozonation process for tetracycline hydrochloride (TCH) degradation under simulated solar light irradiation. Bi₂WO₆ triggered an effective synergy between photocatalysis and ozonation, and it showed a good activity and adaptability in the degradation of organic compounds. Besides, the influence of experimental factors on the total organic carbon removal (including catalyst dosage, ozone concentration, initial pH, reaction temperature and coexisting ions) was also investigated comprehensively. Spin-trapping electron paramagnetic resonance measurements and quenching experiments demonstrated that O₂^-, OH, ¹O₂ and h⁺ contributed to TCH degradation. The possible degradation pathways of TCH were proposed by identifying the intermediates with liquid chromatography-mass spectroscopy.

Graphitic carbon nitride nanosheets via acid pretreatments for promoted photocatalysis toward degradation of organic pollutants

Acid treatment serves as an effective engineering strategy to modify the structure of graphitic carbon nitride (g-C₃N₄) for enhanced metal-free photocatalysis, while their lacks a comprehensive understanding about the impacts of different acid species and acid treatment approaches on the intrinsic structure and properties of g-C₃N₄ and structure-activity relationships are ambiguous. Employing inorganic/organic acids including hydrochloric acid (HCl), nitric acid (HNO₃), acetic acid (HAc), sulphuric acid (H₂SO₄), or oxalic acid (H₂C₂O₄) as treatment acids, herein, we compare the impacts of different acid pretreatment approaches on the structure and properties of g-C₃N₄. Due to different acid-melamine interaction modes and the activation roles of various acids, the obtained g-C₃N₄ samples exhibit varied structures, physiochemical properties and photocatalytic activities. Compared with bulk graphitic carbon nitride (BCN), g-C₃N₄ prepared by acid pretreatment show enhanced photocatalytic performance on bisphenol A (BPA) degradation. The photocatalytic degradation rates of BPA by g-C₃N₄ prepared by HNO₃, HAc, H₂SO₄, H₂C₂O₄, or HCl pretreatment are about 2.2, 2.7, 2.8, 3.2 and 3.8 folds faster than that by BCN. HCl pretreatment proves to be the optimal approach, with the derived g-C₃N₄ (HTCN) showing more intact heptazine structural units, and increased specific surface area, which promote the exposure of more active sites, accelerate charge transfer, and give rise to a notable improvement in photocatalysis, eventually. Mechanistic investigations through quenching experiments and electron paramagnetic resonance (EPR) characterization unveil that superoxide ion radical (O₂^-) and photo-induced holes (h⁺) worked principally in the photodegradation reaction. This work provides new insights for the rational selection of acid types and treatment methods to synthesize metal-free carbon nitrides with improved activity for photocatalytic applications.

Synthesis of bismuth oxyhalide (BiOBr zI (1- z)) solid solutions for photodegradation of methylene dye

Background: The removal of textile wastes is a priority due to their mutagenic and carcinogenic properties.  In this study, bismuth oxyhalide was used in the removal of methylene blue (MB) which is a textile waste. The main objective of this study was to develop and investigate the applicability of a bismuth oxyhalide (BiOBr _zI _(1-z)) solid solutions in the photodegradation of MB under solar and ultraviolet (UV) light irradiation. Methods: Bismuth oxyhalide (BiOBr _zI _(1-z)) (0 ≤ z ≤ 1) materials were successfully prepared through the hydrothermal method. Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), X-ray diffractometer (XRD), and scanning electron microscope (SEM) were used to determine the surface area, microstructure, crystal structure, and morphology of the resultant products. The photocatalytic performance of BiOBr _zI _(1-z) materials was examined through methylene blue (MB) degradation under UV light and solar irradiation. Results: The XRD showed that BiOBr _zI _(1-z) materials crystallized into a tetragonal crystal structure with (102) peak slightly shifting to lower diffraction angle with an increase in the amount of iodide (I ^-). BiOBr _0.6I _0.4 materials showed a point of zero charge of 5.29 and presented the highest photocatalytic activity in the removal of MB with 99% and 88% efficiency under solar and UV irradiation, respectively. The kinetics studies of MB removal by BiOBr _zI _(1-z) materials showed that the degradation process followed nonlinear pseudo-first-order model indicating that the removal of MB depends on the population of the adsorption sites. Trapping experiments confirmed that photogenerated holes (h ⁺) and superoxide radicals ( ^•O ₂ ^-) are the key species responsible for the degradation of MB. Conclusions : This study shows that bismuth oxyhalide materials are very active in the degradation of methylene blue dye using sunlight and thus they have great potential in safeguarding public health and the environment from the dye's degradation standpoint. Moreover, the experimental results agree with nonlinear fitting.

Highly efficient removal of Sb(V) from water by franklinite-containing nano-FeZn composites

The existence of toxic and carcinogenic pentavalent antimony in water is a great safety problem. In order to remove antimony(V) from water, the purpose of this study was to prepare a novel graphene nano iron zinc (rGO/NZV-FeZn) photocatalyst via hydrothermal method followed by ultrasonication. Herein, weakly magnetic nano-Fe–Zn materials (NZV-FeZn, GAC^SP/NZV-FeZn, and rGO/NZV-FeZn) capable of rapid and efficient Sb(V) adsorption from water were prepared and characterised. In particular, rGO/NZV-FeZn was shown to comprise franklinite, Fe⁰, and graphite. Adsorption data were fitted by a quasi-second-order kinetic equation and Langmuir model, revealing that among these materials, NZV-FeZn exhibited the best Sb removal performance (543.9 mg_Sb g_NZV-FeZn⁻¹, R² = 0.951). In a practical decontamination test, Sb removal efficiency of 99.38% was obtained for a reaction column filled with 3.5 g of rGO/NZV-FeZn. Column regenerability was tested at an initial concentration of 0.8111 mg_Sb L⁻¹, and the treated water obtained after five consecutive runs complied with the GB5749-2006 requirement for Sb. rGO/NZV-FeZn was suggested to remove Sb(V) through adsorption-photocatalytic reduction and flocculation sedimentation mechanisms and, in view of its high cost performance, stability, and upscalable synthesis, was concluded to hold great promise for source water and wastewater treatment.

Photocatalytic ZnO-Assisted Degradation of Spiramycin in Urban Wastewater: Degradation Kinetics and Toxicity

The removal of contaminants of emerging concern from urban wastewater treatment plants (WWTPs) remains a challenge to promote safe wastewater reuse practices. Macrolides are the most abundant antibiotics detected in untreated wastewater and their concentration in WWTPs effluents is only partially reduced by conventional treatments. Among several advanced oxidation processes (AOPs), photocatalysis has demonstrated the capability to effectively remove pharmaceuticals from different aqueous matrices. Recently, ZnO has emerged as an efficient, promising, and less expensive alternative to TiO2, due to its photocatalytic capability and attitude to exploit better the solar spectrum than TiO2. In this study, the behaviors of ZnO photocatalysis were evaluated using a representative macrolide antibiotic, spiramycin (SPY), in aqueous solutions and urban wastewater. After 80 min of photocatalysis, 95–99% removal of SPY was achieved at 1 g L−1 ZnO concentrations in aqueous solutions and wastewater, respectively. After treatment, the effluent toxicity, evaluated using the bacterium Aliivibrio fischeri, the green alga Raphidocelis subcapitata, and the crustacean Daphnia magna ranged between slight acute and high acute hazard. Filterable and ultrafilterable Zn concentrations were quantified in treated effluents and shown to be high enough to contribute to the observed toxicity.

Design, Fabrication, and Mechanism of Nitrogen-Doped Graphene-Based Photocatalyst

Solving energy and environmental problems through solar-driven photocatalysis is an attractive and challenging topic. Hence, various types of photocatalysts have been developed successively to address the demands of photocatalysis. Graphene-based materials have elicited considerable attention since the discovery of graphene. As a derivative of graphene, nitrogen-doped graphene (NG) particularly stands out. Nitrogen atoms can break the undifferentiated structure of graphene and open the bandgap while endowing graphene with an uneven electron density distribution. Therefore, NG retains nearly all the advantages of original graphene and is equipped with several novel properties, ensuring infinite possibilities for NG-based photocatalysis. This review introduces the atomic and band structures of NG, summarizes in situ and ex situ synthesis methods, highlights the mechanism and advantages of NG in photocatalysis, and outlines its applications in different photocatalysis directions (primarily hydrogen production, CO₂ reduction, pollutant degradation, and as photoactive ingredient). Lastly, the central challenges and possible improvements of NG-based photocatalysis in the future are presented. This study is expected to learn from the past and achieve progress toward the future for NG-based photocatalysis.

Effects of zinc oxide and calcium-doped zinc oxide nanocrystals on cytotoxicity and reactive oxygen species production in different cell culture models

Objectives

This study aimed to synthesize nanocrystals (NCs) of zinc oxide (ZnO) and calcium ion (Ca²⁺)-doped ZnO with different percentages of calcium oxide (CaO), to evaluate cytotoxicity and to assess the effects of the most promising NCs on cytotoxicity depending on lipopolysaccharide (LPS) stimulation.

Materials and Methods

Nanomaterials were synthesized (ZnO and ZnO:xCa, x = 0.7; 1.0; 5.0; 9.0) and characterized using X-ray diffractometry, scanning electron microscopy, and methylene blue degradation. SAOS-2 and RAW 264.7 were treated with NCs, and evaluated for viability using the MTT assay. NCs with lower cytotoxicity were maintained in contact with LPS-stimulated (+LPS) and nonstimulated (−LPS) human dental pulp cells (hDPCs). Cell viability, nitric oxide (NO), and reactive oxygen species (ROS) production were evaluated. Cells kept in culture medium or LPS served as negative and positive controls, respectively. One-way analysis of variance and the Dunnett test (α = 0.05) were used for statistical testing.

Results

ZnO:0.7Ca and ZnO:1.0Ca at 10 µg/mL were not cytotoxic to SAOS-2 and RAW 264.7. +LPS and −LPS hDPCs treated with ZnO, ZnO:0.7Ca, and ZnO:1.0Ca presented similar NO production to negative control (p > 0.05) and lower production compared to positive control (p < 0.05). All NCs showed reduced ROS production compared with the positive control group both in +LPS and −LPS cells (p < 0.05).

Conclusions

NCs were successfully synthesized. ZnO, ZnO:0.7Ca and ZnO:1.0Ca presented the highest percentages of cell viability, decreased ROS and NO production in +LPS cells, and maintenance of NO production at basal levels.

Enhancing the Photocatalytic Activity of SnO2-TiO2 and ZnO-TiO2 Tandem Structures Toward Indoor Air Decontamination

ZnO-TiO₂ and SnO₂-TiO₂ tandem structures were developed using the doctor blade technique. It was found that by employing organic hydrophilic and hydrophobic as additives into the precursor it is possible to tailor the film density and morphology with direct consequences on the photocatalytic activity of the tandem structures. The highest photocatalytic efficiency corresponds to ZnO-TiO₂ and can reach 74.04% photocatalytic efficiency toward acetaldehyde when a hydrophilic additive is used and 70.93% when a hydrophobic additive is employed. The snO₂-TiO₂ tandem structure presents lower photocatalytic properties (61.35 % when the hydrophilic additive is used) with a constant rate reaction of 0.07771 min⁻¹.

Green synthesis of boron and nitrogen co-doped TiO2 with rich B-N motifs as Lewis acid-base couples for the effective artificial CO2 photoreduction under simulated sunlight

Boron and nitrogen co-doped Titanium dioxide (TiO₂) nanosheets (BNT) with high surface area of 136.5 m² g^-1 were synthesized using ammonia borane as the green and triple-functional regent, which avoids the harmful and explosive reducing regents commonly used to create surface defects on TiO₂. The decomposition of ammonia borane could incorporate reactive Lewis acid-base (B, N) pairs, together with the as-generated H₂ to create mesoporous structure and rich oxygen vacancies in pristine TiO₂. The BNTs prepared from various ammonia borane loading are evaluated in photoreduction of carbon dioxide (CO₂) with steam under simulated sunlight, achieving about 3.5 times higher carbon monoxide (CO) production than pristine TiO₂ under the same conditions. Steady state and transient optical measurements indicated BNT with reduced band gap, rich defect states and elevated conduction band position could enhance the light harvesting efficiency and promote the charge transfer at the catalyst/CO₂ interface. Density functional theory simulation and in situ FTIR suggest that the Lewis acid-base (B, N) pairs on BNT may very substantially increase the activation of inert CO₂ which facilitates their photoreduction with the hydrogen from the water splitting at the surface defects on TiO₂. Finally, a reaction mechanism of Lewis acid-base assisted CO₂ photoreduction leading to substantially improved performance is proposed.

Use of scavenger agents in heterogeneous photocatalysis: truths, half-truths, and misinterpretations

The use of scavenger agents must be thoughtfully considered in mechanistic investigations of heterogeneous photocatalysis since atypical radicals are produced.

Sonocatalytic degradation of tetracycline antibiotic using zinc oxide nanostructures loaded on nano-cellulose from waste straw as nanosonocatalyst

The aim of the present investigation was the combination of ZnO nanostructures with nano-cellulose (NC) for the efficient degradation of tetracycline (TC) antibiotic under ultrasonic irradiation. The removal efficiency of 12.8% was obtained by the sole use of ultrasound (US), while the removal efficiency increased up to 70% by the US/ZnO treatment process. Due to the integration of ZnO nanostructures with NC, the removal efficiency of 87.6% was obtained within 45 min. The removal efficiency substantially decreased in the presence of tert-butyl alcohol (more than 25% reduction), indicating that ^radOH-mediation oxidation is responsible for the degradation of TC molecules. Peroxymonosulfate (PMS) led to the most enhancing effect on the removal of TC among percarbonate, persulfate and periodate ions. The addition of PMS caused the degradation efficiency of 96.4% within the short contact time of 15 min. The bio-toxicity examination on the basis of inhibition test conducted on activated sludge revealed diminishing the oxygen consumption inhibition percent [I_OUR (%)] from 33.6 to 22.1% during the US/ZnO/NC process. Consequently, the utilization of the US/ZnO/NC process can convert TC molecules to less toxic compounds. However, longer reaction time is required for complete conversion into non-toxic substances.

Photocatalytic properties of a new Z-scheme system BaTiO3/In2S3 with a core–shell structure

It's highly desired to design an effective Z-scheme photocatalyst with excellent charge transfer and separation, a more negative conduction band edge (E_CB) than O₂/·O₂⁻ (−0.33 eV) and a more positive valence band edge (E_VB) than ·OH/OH⁻ (+2.27 eV).