Constructing conductive titanium carbide nanosheet (MXene) network on polyurethane/polyacrylonitrile fibre framework for flexible strain sensor

Highly Stable Heating Fibers of Ti3C2Tx MXene and Polyacrylonitrile via Synergistic Thermal Annealing

Nanohybrid assemblies provide an effective platform for integrating the intrinsic properties of individual components into microscale fibers. In this study, a novel approach for creating mechanically and environmentally stable MXene fibers through the synergistic assembly of MXene and polyacrylonitrile (PAN), is introduced. Unlike fibers generated via a conventional stabilization process, which relies on air-based stabilization to transform the PAN molecules into ring structures fundamental to carbon fibers, the hybrid fibers are annealed in an Ar atmosphere. This unique approach suggests MXene can serve as an oxygen provider that is essential for stabilizing PAN. As a result, significantly improved interfiber compactness is achieved and the oxidation stability of MXene is enhanced under atmospheric conditions. The resulting fibers exhibit exceptional stability, even after extended exposure to high humidity and elevated temperatures. This highlights the suitability of the thermally annealed MXene-PAN (T-MX-PAN) fibers as robust electric heating elements. Notably, these fibers consistently generate heat over 1800 bending cycles. When integrated into fabrics, they demonstrate the capability to generate sufficient heat for melting ice and rapid evaporation. This study highlights the potential of T-MX-PAN fibers as next-generation wearable heaters and offers valuable insights into advancing wearable technology in demanding environments.

Mechanically robust and electrically conductive nanofiber composites with enhanced interfacial interaction for strain sensing

Electrically conductive fiberfibre/fabric composites (ECFCs) are competitive candidates for use in wearable electronics. Therefore, it is essential to develop mechanically robust ECFC strain sensors with sensing performance. In this study, MXene assembly and hot-pressing were combined to prepare strong yet breathable ECFCs for strain and temperature sensing. Hydrogen bonding between MXene and polyurethane (PU) and ultrasonication-induced interfacial sintering were responsible for MXene nanosheets assembly on the PU nanofibers. MXene decoration made PU nanofibers electrically conductive, resulting in a conductive network. Hot-pressing improved interface adhesion among the conductive nanofibers. Thus, the mechanical properties of the nanofiber composites, including tensile strength, toughness and fracture energy, were enhanced. The nanofiber composites exhibited surface stability and durability. When the nanofiber composites were used as strain sensors, they showed breathability with a linear resistance response ranging from 1 % to 100 % and cycling stability. In addition, they produced stable sensing signals over 1000 cycles when a notch was present. They could also monitor temperature variations with a negative temperature coefficient (-0.146 %/°C). This study provides an interfacial regulation method for the preparation of multi-functional nanofiber composites with potential applications in flexible and wearable electronics.

Data-Driven Strain Sensor Design Based on a Knowledge Graph Framework

Wearable flexible strain sensors require different performance depending on the application scenario. However, developing strain sensors based solely on experiments is time-consuming and often produces suboptimal results. This study utilized sensor knowledge to reduce knowledge redundancy and explore designs. A framework combining knowledge graphs and graph representational learning methods was proposed to identify targeted performance, decipher hidden information, and discover new designs. Unlike process-parameter-based machine learning methods, it used the relationship as semantic features to improve prediction precision (up to 0.81). Based on the proposed framework, a strain sensor was designed and tested, demonstrating a wide strain range (300%) and closely matching predicted performance. This predicted sensor performance outperforms similar materials. Overall, the present work is favorable to design constraints and paves the way for the long-awaited implementation of text-mining-based knowledge management for sensor systems, which will facilitate the intelligent sensor design process.

Flexible Strain Sensors Based on Thermoplastic Polyurethane Fabricated by Electrospinning: A Review

Over recent years, thermoplastic polyurethane (TPU) has been widely used as a substrate material for flexible strain sensors due to its remarkable mechanical flexibility and the ease of combining various conductive materials by electrospinning. Many research advances have been made in the preparation of flexible strain sensors with better ductility, higher sensitivity, and wider sensing range by using TPU in combination with various conductive materials through electrospinning. However, there is a lack of reviews that provide a systematic and comprehensive summary and outlook of recent research advances in this area. In this review paper, the working principles of strain sensors and electrospinning technology are initially described. Subsequently, recent advances in strain sensors based on electrospun TPU are tracked and discussed, with a focus on the incorporation of various conductive fillers such as carbonaceous materials, MXene, metallic materials, and conductive polymers. Moreover, the wide range of applications of electrospun TPU flexible strain sensors is thoroughly discussed. Finally, the future prospects and challenges of electrospun TPU flexible strain sensors in various fields are pointed out.

Architectural design and affecting factors of MXene-based textronics for real-world application

Today, textile-based wearable electronic devices (textronics) have been developed by taking advantage of nanotechnology and textile substrates. Textile substrates offer flexibility, air permeability, breathability, and wearability, whereas, using nanomaterials offers numerous functional properties, like electrical conductivity, hydrophobicity, touch sensitivity, self-healing properties, joule heating properties, and many more. For these reasons, textronics have been extensively used in many applications. Recently, new emerging two-dimensional (2D) transition metal carbide and nitride, known as MXene, nanomaterials have been highly considered for developing textronics because the surface functional groups and hydrophilicity of MXene nanoflakes allow the facile fabrication of MXene-based textronics. In addition, MXene nanosheets possess excellent electroconductivity and mechanical properties as well as large surface area, which also give numerous opportunities to develop novel functional MXene/textile-based wearable electronic devices. Therefore, this review summarizes the recent advancements in the architectural design of MXene-based textronics, like fiber, yarn, and fabric. Regarding the fabrication of MXene/textile composites, numerous factors affect the functional properties (e.g. fabric structure, MXene size, etc.). All the crucial affecting parameters, which should be chosen carefully during the fabrication process, are critically discussed here. Next, the recent applications of MXene-based textronics in supercapacitors, thermotherapy, and sensors are elaborately delineated. Finally, the existing challenges and future scopes associated with the development of MXene-based textronics are presented.

Multi-Layer Polyurethane-Fiber-Prepared Entangled Strain Sensor with Tunable Sensitivity and Working Range for Human Motion Detection

The entanglement of fibers can form physical and topological structures, with the resulting bending and stretching strains causing localized changes in pressure. In this study, a multi-layer polyurethane-fiber-prepared (MPF) sensor was developed by coating the CNT/PU sensing layer on the outside of an elastic electrode through a wet-film method. The entangled topology of two MPFs was utilized to convert the stretching strain into localized pressure at the contact area, enabling the perception of stretching strain. The influence of coating mechanical properties and surface structure on strain sensing performance was investigated. A force regulator was introduced to regulate the mechanical properties of the entangled topology of MPF. By modifying the thickness and length proportion of the force regulator, the sensitivity factor and sensitivity range of the sensor could be controlled, achieving a high sensitivity factor of up to 127.74 and a sensitivity range of up to 58%. Eight sensors were integrated into a sensor array and integrated into a dance costume, successfully monitoring the multi-axis motion of the dancer's lumbar spine. This provides a new approach for wearable biomechanical sensors.

Performance analysis of solution-processed nanosheet strain sensors-a systematic review of graphene and MXene wearable devices

Nanotechnology has led to the realisation of many potentialInternet of Thingsdevices that can be transformative with regards to future healthcare development. However, there is an over saturation of wearable sensor review articles that essentially quote paper abstracts without critically assessing the works. Reported metrics in many cases cannot be taken at face value, with researchers overly fixated on large gauge factors. These facts hurt the usefulness of such articles and the very nature of the research area, unintentionally misleading those hoping to progress the field. Graphene and MXenes are arguably the most exciting organic and inorganic nanomaterials for polymer nanocomposite strain sensing applications respectively. Due to their combination of cost-efficient, scalable production and device performances, their potential commercial usage is very promising. Here, we explain the methods for colloidal nanosheets suspension creation and the mechanisms, metrics and models which govern the electromechanical properties of the polymer-based nanocomposites they form. Furthermore, the many fabrication procedures applied to make these nanosheet-based sensing devices are discussed. With the performances of 70 different nanocomposite systems from recent (post 2020) publications critically assessed. From the evaluation of these works using universal modelling, the prospects of the field are considered. Finally, we argue that the realisation of commercial nanocomposite devices may in fact have a negative effect on the global climate crisis if current research trends do not change.

Surface-Enhanced Raman Spectroscopy for Boosting Electrochemical CO2 Reduction on Amorphous-Surfaced Tin Oxide Supported by MXene

Amorphous materials disrupt the intrinsic linear scalar dependence seen in their crystalline counterparts, typically exhibiting enhanced catalytic characteristics. Nevertheless, substantial obstacles remain in terms of boosting their stability, enhancing their conductivity, and elucidating distinct catalytic mechanisms. Herein, a core-shell catalyst, comprising a crystalline SnO2 core and an amorphous SnOx shell supported on MXene (denoted as SnO2@SnOx/MXene), was prepared utilizing hydrothermal and solution reduction methods. The SnO2@SnOx/MXene catalyst excels in the electrocatalytic conversion of CO2 to formate, yielding a Faradaic efficiency (FE) as high as 93% for formate production at -1.17 V vs RHE and demonstrating exceptional durability. Both density functional theory (DFT) calculations and experimental results indicate that the SnOx shell bolsters formate formation by fine-tuning the adsorption energy of the *OCHO intermediate. In SnO2@SnOx/MXene, MXene plays a vital role in enhancing the conductivity and stability of the amorphous shell and especially amplifying Raman signals of catalyst components. The ex/in situ surface-enhanced Raman scattering (SERS) application further confirms the formation of amorphous SnOx and further enables the direct detection of the formation of the intermediate species. This work provides the basis for the application of amorphous materials in practical electrocatalytic reduction of CO2 reduction.

An Overview of Electrochemical Sensors Based on Transition Metal Carbides and Oxides: Synthesis and Applications

Sensors play vital roles in industry and healthcare due to the significance of controlling the presence of different substances in industrial processes, human organs, and the environment. Electrochemical sensors have gained more attention recently than conventional sensors, including optical fibers, chromatography devices, and chemiresistors, due to their better versatility, higher sensitivity and selectivity, and lower complexity. Herein, we review transition metal carbides (TMCs) and transition metal oxides (TMOs) as outstanding materials for electrochemical sensors. We navigate through the fabrication processes of TMCs and TMOs and reveal the relationships among their synthesis processes, morphological structures, and sensing performance. The state-of-the-art biological, gas, and hydrogen peroxide electrochemical sensors based on TMCs and TMOs are reviewed, and potential challenges in the field are suggested. This review can help others to understand recent advancements in electrochemical sensors based on transition metal oxides and carbides.

Photocurable Carbon Nanotube/Polymer Nanocomposite for the 3D Printing of Flexible Capacitive Pressure Sensors

A photocurable resin/carbon nanotube (CNT) nanocomposite was fabricated from aligned CNTs in an acrylic matrix. The conductivity of the nanocomposite increased rapidly and then stabilized when the CNT content was increased up to and beyond the percolation threshold. Various structures were created using a digital light processing (DLP) 3D printer. Various polymeric dispersants (SMA-amide) were designed and synthesized to improve the CNT dispersion and prevent aggregation. The benzene rings and lone electron pairs on the dispersant interacted with aromatic groups on the CNTs, causing the former to wrap around the latter. This created steric hindrance, thereby stabilizing and dispersing the CNTs in the solvent. CNT/polymer nanocomposites were created by combining the dispersant, CNTs, and a photocurable resin. The CNT content of the nanocomposite and the 3D printing parameters were tuned to optimize the conductivity and printing quality. A touch-based human interface device (HID) that utilizes the intrinsic conductivity of the nanocomposite and reliably detects touch signals was fabricated, enabling the free design of sensors of various styles and shapes using a low-cost 3D printer. The production of sensors without complex circuitry was achieved, enabling novel innovations.

Floating metal phthalocyanine@polyacrylonitrile nanofibers for peroxymonosulfate activation: Synergistic photothermal effects and highly efficient flowing wastewater treatment

Highly efficient floating photocatalysis has potential applications in organic pollutant treatment but remains limited by low degradation efficiency in practical applications. By introducing the photothermal effect into a peroxymonosulfate (PMS) coupled photocatalysis system, tetracycline hydrochloride (TCH) degradation could be significantly enhanced using floating metal phthalocyanine@polyacrylonitrile (MPc@PAN) nanofiber mats. MPc@PAN nanofibers with different metal centers showed similar photothermal conversion performance but different activation energies for PMS activation, resulting in metal-center-dependent synergistic photothermal effects, i.e., light-enhanced dominated, thermal-enhanced dominated, and conjointly light-thermal dominated mechanisms. The porous structures and floating ability of the FePc@PAN nanofibers provided a fast mass transfer process, with higher solar energy utilization and superior photothermal conversion performance than the FePc nanopowders. Meanwhile, the FePc@PAN nanofibers showed excellent TCH removal stability within 10 cycles (>92%) and extremely low Fe ion leaching (<0.055 mg/L) in a dual-channel flowing wastewater treatment system. This work provides new insight into PMS activation via photothermal effects for environmental remediation.

MXene nanosheets woven in polyacrylonitrile nanofiber yarns aligned spider web as a highly efficient sorbent for in-tube solid phase microextraction of beta-blockers from biofluids

The use of electrospinning has received much attention in the production of nanofiber webs due to its advantages such as flexibility and simplicity. The direct electrospinning of nanofibers in an aligned or twisted form and the production of nanofiber yarns can turn nanofibers into woven fabrics, which leads to an increase in the diversity of nanofiber applications and improves their end-use possibilities. In this work, a victorious nanofiber yarn spinning system was used with the help of a rotating funnel. Yarn formation was studied using a composited polyacrylonitrile (PAN)/MXene polymer solution ejected from two oppositely charged nozzles. Finaly their application for packed-in-tube solid-phase microextraction of β-blocker drugs from biofluids was demonstrated. The separation and quantification of analytes were performed by HPLC-UV instrument. The 3D-yarn PAN/MXene sorbent exhibited high flexibility, porosity, sorbent loading, mechanical stability, and a long lifetime. The characterization of the final nanofiber was carried out utilizing Fourier-transform infrared spectroscopy, field emission scanning electron microscope, energy-dispersive X-ray mapping, transmission electron microscope and X-ray diffraction analysis. Various parameters that affect the extraction efficiency, such as extraction time, pH, ionic strength and flow rate of sample solution, and type, volume and flow rate of eluent, were investigated and optimized. Under optimized conditions, the limits of detection were obtained in the range of 1.5-3.0 μg L-1. This method demonstrated appropriate linearity for β-blockers in the range of 5.0-1000.0 μg L-1, with coefficients of determination greater than 0.990. The inter- and intra-assay precisions (RSDs, for n = 3) are in the range of 2.5-3.5%, and 4.5-5.2%, respectively. Finally, the validated method was put in an application for the analysis of atenolol, propranolol and betaxolol in human urine and saliva samples at different hours and acceptable relative recoveries were obtained in the range of 89.5% to 110.4%.

Soft Electronics for Health Monitoring Assisted by Machine Learning

Due to the development of the novel materials, the past two decades have witnessed the rapid advances of soft electronics. The soft electronics have huge potential in the physical sign monitoring and health care. One of the important advantages of soft electronics is forming good interface with skin, which can increase the user scale and improve the signal quality. Therefore, it is easy to build the specific dataset, which is important to improve the performance of machine learning algorithm. At the same time, with the assistance of machine learning algorithm, the soft electronics have become more and more intelligent to realize real-time analysis and diagnosis. The soft electronics and machining learning algorithms complement each other very well. It is indubitable that the soft electronics will bring us to a healthier and more intelligent world in the near future. Therefore, in this review, we will give a careful introduction about the new soft material, physiological signal detected by soft devices, and the soft devices assisted by machine learning algorithm. Some soft materials will be discussed such as two-dimensional material, carbon nanotube, nanowire, nanomesh, and hydrogel. Then, soft sensors will be discussed according to the physiological signal types (pulse, respiration, human motion, intraocular pressure, phonation, etc.). After that, the soft electronics assisted by various algorithms will be reviewed, including some classical algorithms and powerful neural network algorithms. Especially, the soft device assisted by neural network will be introduced carefully. Finally, the outlook, challenge, and conclusion of soft system powered by machine learning algorithm will be discussed.

Graded Mxene-Doped Liquid Metal as Adhesion Interface Aiming for Conductivity Enhancement of Hybrid Rigid-Soft Interconnection

Hybrid rigid-soft electronic system combines the biocompatibility of stretchable electronics and the computing capacity of silicon-based chips, which has a chance to realize a comprehensive stretchable electronic system with perception, control, and algorithm in near future. However, a reliable rigid-soft interconnection interface is urgently required to ensure both the conductivity and stretchability under a large strain. To settle this demand, this paper proposes a graded Mxene-doped liquid metal (LM) method to achieve a stable solid-liquid composite interconnect (SLCI) between the rigid chip and stretchable interconnect lines. To overcome the surface tension of LM, a high-conductive Mxene is doped for the balance between adhesion and liquidity of LM. And the high-concentration doping could prevent the contact failure with chip pins, while the low-concentration doping tends to maintain the stretchability. Based on this dosage-graded interface structure, the solid light-emitting diode (LED) and other devices integrated into the stretchable hybrid electronic system could achieve an excellent conductivity insensitive to the exerted tensile strain. In addition, the hybrid electronic system is demonstrated for skin-mounted and tire-mounted temperature-test applications under the tensile strain up to 100%. This Mxene-doped LM method aims to obtain a robust interface between rigid components and flexible interconnects by attenuating the inherent Young's modulus mismatch between rigid and flexible systems and makes it a promising candidate for effective interconnection between solid electronics and soft electronics.

Bis(2-hydroxyethyl) Terephthalate-Modified Ti3C2Tx/Graphene Nanohybrids as Three-Dimensional Functional Chain Extenders for Polyurethane Composite Films with Strain-Sensing and Conductive Properties

Incorporation of functional nanofillers can unlock the potential of polymers as advanced materials. Herein, single-layered and three-dimensional reduced graphene oxide (rGO)/Ti₃C₂T_x (B-rGO@Ti₃C₂T_x) nanohybrids were constructed using bis(2-hydroxyethyl) terephthalate (BHET) as a coupling agent between rGO and Ti₃C₂T_x through covalent and hydrogen bonds. It is found that BHET can not only resist the weak oxidization of Ti₃C₂T_x to some degree but also prevent the self-stacking of Ti₃C₂T_x and rGO sheets. Then, B-rGO@Ti₃C₂T_x was used as a functional nanofiller and three-dimensional chain extender for preparing the waterborne polyurethane (WPU) nanocomposite through in situ polymerization. Compared with WPU nanocomposites with an equivalent amount of Ti₃C₂T_x/rGO@Ti₃C₂T_x, although containing an equivalent amount of BHET, WPU/B-rGO@Ti₃C₂T_x nanocomposites show significantly improved performance. For example, 5.66 wt % of B-rGO@Ti₃C₂T_x endows WPU with a high tensile strength of 36.0 MPa (improved by 380%), thermal conductivity of 0.697 W·m^-1·K^-1, electrical conductivity of 1.69 × 10^-2 S/m (enhanced by 39 times), good strain-sensing behavior, electromagnetic interference (EMI)-shielding performance of 49.5 dB in the X-band, and excellent thermal stability. Therefore, the construction of rGO@Ti₃C₂T_x nanohybrids with the aid of chain extenders may unlock new possibilities of polyurethane as smart materials.

Bioinspired Laminated Bioceramics with High Toughness for Bone Tissue Engineering

For the research of biomaterials in bone tissue engineering, it is still a challenge to fabricate bioceramics that overcome brittleness while maintaining the great biological performance. Here, inspired by the toughness of natural materials with hierarchical laminated structure, we presented a directional assembly-sintering approach to fabricate laminated MXene/calcium silicate-based (L-M/CS) bioceramics. Benefiting from the orderly laminated structure, the L-M/CS bioceramics exhibited significantly enhanced toughness (2.23 MPa·m^1/2) and high flexural strength (145 MPa), which were close to the mechanical properties of cortical bone. Furthermore, the L-M/CS bioceramics possessed more suitable degradability than traditional CaSiO₃ bioceramics due to the newly formed CaTiSiO₅ after sintering. Moreover, the L-M/CS bioceramics showed good biocompatibility and could stimulate the expression of osteogenesis-related genes. The mechanism of promoting osteogenic differentiation had been shown to be related to the Wnt signaling pathway. This work not only fabricated calcium silicate-based bioceramics with excellent mechanical and biological properties for bone tissue engineering but also provided a strategy for the combination of bionics and bioceramics.

The Progress of Research into Flexible Sensors in the Field of Smart Wearables

In modern society, technology associated with smart sensors made from flexible materials is rapidly evolving. As a core component in the field of wearable smart devices (or 'smart wearables'), flexible sensors have the advantages of excellent flexibility, ductility, free folding properties, and more. When choosing materials for the development of sensors, reduced weight, elasticity, and wearer's convenience are considered as advantages, and are suitable for electronic skin, monitoring of health-related issues, biomedicine, human-computer interactions, and other fields of biotechnology. The idea behind wearable sensory devices is to enable their easy integration into everyday life. This review discusses the concepts of sensory mechanism, detected object, and contact form of flexible sensors, and expounds the preparation materials and their applicability. This is with the purpose of providing a reference for the further development of flexible sensors suitable for wearable devices.

Mechanically robust Janus nanofibrous membrane with asymmetric wettability for high efficiency emulsion separation

Water pollution caused by oil leakage or oily sewage has seriously threatened the ecological environment and human health. It remains a tough task for scientists to develop versatile materials to purify different kinds of oily wastewater. In this study, we propose a facile "carbon nanotubes (CNTs) decoration and nanofibrous membrane integration" method to prepare a mechanical robust Janus membrane (JM) composed of a superhydrophilic nanofiber composite layer and a hydrophobic nanofiber composite layer. The asymmetric wettability can be controlled by tuning the thickness of the hydrophobic layer. The nanofiber composite in both two layers possesses a core-shell structure, guaranteeing the excellent flexibility and stretchability of the JM. In addition, the strong interfacial compatibility between the two layers ensures the stability and durability of the JM even after multiple stretching. More importantly, the JM could realize on-demand separation of different kinds of oily wastewater with high separation flux and separation efficiency, including oil/water mixtures with different oil densities, oil-in-water emulsions and water-in-oil emulsions. Furthermore, the JM exhibits cycling stability and long-term serviceability for the emulsion separation. The mechanically robust and stretchable JM has promising applications in purification of various oil contaminated wastewater.

Interfacially confined preparation of copper Porphyrin-contained nanofilms towards High-performance Strain-Pressure monitoring

The development of ultrasensitive, durable and anti-jamming strain-pressure sensors that can precisely distinguish different motions or deformations is crucial for health diagnosis and disaster monitoring, but it also remains a challenge. In this study, a self-standing, highly flexible and uniform nanofilm (CuPTFA) was fabricated via interfacial covalent condensation of a copper complex of 5,10,15,20-tetra(4-carboxyphenyl)-porphine tetrahydrizides (Cu-TPPNHNH₂) and tris-(4-formylphenyl)-amine (TFA). The film was used as a sensing layer in a strain-pressure sensor with a sandwich-like structure of Au/I₂@CuPTFA/Au. The sensor had a gauge factor exceeding 10000, a strain range of linear response of 3-7%, reliable output signals after 5000 times of continuous use, and extraordinary noise-screening capability. The strain-pressure sensor can differentiate moderate muscle hyper-spasm from subtle swaying, walking and vigorous sporting activities, with great potential for real-life applications.

Materials, Preparation Strategies, and Wearable Sensor Applications of Conductive Fibers: A Review

The recent advances in wearable sensors and intelligent human-machine interfaces have sparked a great many interests in conductive fibers owing to their high conductivity, light weight, good flexibility, and durability. As one of the most impressive materials for wearable sensors, conductive fibers can be made from a variety of raw sources via diverse preparation strategies. Herein, to offer a comprehensive understanding of conductive fibers, we present an overview of the recent progress in the materials, the preparation strategies, and the wearable sensor applications related. Firstly, the three types of conductive fibers, including metal-based, carbon-based, and polymer-based, are summarized in terms of their principal material composition. Then, various preparation strategies of conductive fibers are established. Next, the primary wearable sensors made of conductive fibers are illustrated in detail. Finally, a robust outlook on conductive fibers and their wearable sensor applications are addressed.

Enzymatic hydrolysis lignin functionalized Ti3C2Tx nanosheets for effective removal of MB and Cu2+ ions

Functionalized two-dimensional Ti₃C₂T_x (TN-EHL) was prepared as an effective adsorbent for removal of methylene blue dye (MB) and copper ions (Cu²⁺). Enzymatic hydrolysis lignin (EHL), a reproducible natural resource, was used to functionalize the Ti₃C₂T_x nanosheets. EHL can not only introduce active functional groups into TN-EHL but also prevent the oxidation of Ti₃C₂T_x, thus promoting the adsorption performance of TN-EHL. The maximum adsorption capacities of TN-EHL50 (in which the EHL content is 50 wt%) for MB and Cu²⁺ were 293.7 mg g^-1 and 49.96 mg g^-1, respectively. The higher correlation coefficients (R²) of MB (0.9996) and Cu²⁺ (0.9995) indicating that their adsorption processes can be described by the pseudo-second-order kinetic model. The MB adsorption data fit the Freundlich isotherm with R² of 0.9953, whereas the Cu²⁺ ions adsorption data fit the Langmuir isotherm with R² of 0.9998. The thermodynamic analysis indicates that the adsorption process of MB and Cu²⁺ on TN-EHL50 is spontaneous and endothermic. Significantly, the Cu²⁺ ions were reduced to Cu₂O and CuO particles during the adsorption process. Therefore, TN-EHL has a great potential as an environmentally friendly adsorbent for MB removal and recovery of Cu²⁺ ions from wastewater.

PDMS-Encapsulated MXene@Polyester Fabric Strain Sensor for Multifunctional Sensing Applications

Flexible strain sensors based on 2D materials have been proven effective for wearable health monitoring devices, human motion detection, and fitness applications. These sensors are flexible, light, and user-friendly, but their sensitivity and detection range need to be enhanced. Among many 2D materials, MXene attracts much interest due to its remarkable properties, such as high electrical conductivity, excellent mechanical properties, flexibility, and good hydrophilicity. However, it is a challenge to fabricate strain sensors with extreme sensitivity and a wide sensing range. In this work, a multifunctional, cost-effective, and highly sensitive PDMS-encapsulated MXene@polyester fabric strain sensor was fabricated. Firstly, complete adsorption of MXene within the fabric formed conductive networks, and then PDMS was used to endow superhydrophobicity and corrosion resistance. The strain sensor demonstrated multifunctional applications and outstanding performance, such as long-term stability (over 500 cycles) and a wide sensing range (8%). The proposed sensor has promising potential for wearable electronic devices such as health monitoring systems and physiological sensing applications.

Ti3C2Tx MXene-Based Flexible Piezoresistive Physical Sensors

MXenes have received increasing attention due to their two-dimensional layered structure, high conductivity, hydrophilicity, and large specific surface area. Because of these distinctive advantages, MXenes are considered as very competitive pressure-sensitive materials in applications of flexible piezoresistive sensors. This work reviews the preparation methods, basic properties, and assembly methods of MXenes and their recent developments in piezoresistive sensor applications. The recent developments of MXene-based flexible piezoresistive sensors can be categorized into one-dimensional fibrous, two-dimensional planar, and three-dimensional sensors according to their various structures. The trends of multifunctional integration of MXene-based pressure sensors are also summarized. Finally, we end this review by describing the opportunities and challenges for MXene-based pressure sensors and the great prospects of MXenes in the field of pressure sensor applications.

Urchin-like hierarchical ruthenium cobalt oxide nanosheets on Ti3C2Tx MXene as a binder-free bifunctional electrode for overall water splitting and supercapacitors

Synthesizing efficient electrode materials for water splitting and supercapacitors is essential for developing clean electrochemical energy conversion/storage devices. In the present work, we report the construction of a ruthenium cobalt oxide (RuCo₂O₄)/Ti₃C₂T_x MXene hybrid by electrophoretic deposition of Ti₃C₂T_x MXene on nickel foam (NF) followed by RuCo₂O₄ nanostructure growth through an electrodeposition process. Owing to the strong interactions between RuCo₂O₄ and Ti₃C₂T_x sheets, which are verified by density functional theory (DFT)-based simulations, RuCo₂O₄/Ti₃C₂T_x MXene@NF can serve as a bifunctional electrode for both water splitting and supercapacitor applications. This electrode exhibits outstanding electrocatalytic activity with low overpotentials of 170 and 68 mV at 100 A m^-2 toward the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The RuCo₂O₄/Ti₃C₂T_x MXene@NF-based alkaline water-splitting cell only requires 1.62 V to achieve a current density of 100 A m^-2, which is much better than that of RuO₂@NF and Pt/C@NF-assembled cells (1.75 V@100 A m^-2). The symmetric supercapacitor (SSC)-assembled electrode displays a high specific capacitance of 229 F g^-1 at 3 A g^-1. The experimental results, complemented with theoretical insights, provide an effective strategy to prepare multifunctional materials for electrocatalysis and energy storage applications.

Freestanding Fe3O4/Ti3C2TxMXene/polyurethane composite film with efficient electromagnetic shielding and ultra-stretchable performance

Electromagnetic pollution seriously affects the human reproductive system, cardiovascular system, people's visual system, and so on. A novel versatile stretchable and biocompatible electromagnetic interference (EMI) shielding film has been developed, which could effectively attenuate electromagnetic radiation. The EMI shielding film was fabricated with a convenient solution casting and steam annealing with 2D MXene, iron oxide nanoparticles, and soluble polyurethane. The EMI shielding effectiveness is about 30.63 dB at 8.2 GHz, based on its discretized interfacial scattering and high energy conversion efficiency. Meanwhile, the excellent tensile elongation is 30.5%, because of the sliding migration and gradient structure of the nanomaterials doped in a polymer matrix. In addition, the film also demonstrated wonderful biocompatibility and did not cause erythema and discomfort even after being attached to the arm skin over 12 h, which shows the great potential for attenuation of electromagnetic irradiation and protection of human health.

Development and Applications of MXene-Based Functional Fibers

The increasing interest toward wearable and portable electronic devices calls for multifunctional materials and fibers/yarns capable of seamless integration with everyday textiles. To date, one particular gap inhibiting the development of such devices is the production of robust functional fibers with improved electronic conductivity and electrochemical energy storage capability. Recent efforts have been made to produce functional fibers with 2D carbides known as MXenes to address these demands. Ti₃C₂T_x MXene, in particular, is known for its metallic conductivity and high volumetric capacitance, and has shown promise for fibers and textile-based devices when used either as an additive, coating or the main fiber component. In this spotlight article, we highlight the recent exciting developments in our diverse efforts to fabricate MXene functionalized fibers, along with a critical evaluation of the challenges in processing, which directly affect macroscale material properties and the performance of the subsequent prototype devices. We also provide our assessment of observed and foreseen challenges of the current manufacturing methods and the opportunities arising from recent advances in the development of MXene fibers and paving future avenues for textile design and practical use in advanced applications.

Knitted Ti3C2Tx MXene based fiber strain sensor for human-computer interaction

Fiber-based stretchable electronics with feasibility of weaving into textiles and advantages of light-weight, long-term stability, conformability and easy integration are highly desirable for wearable electronics to realize personalized medicine, artificial intelligence and human health monitoring. Herein, a fiber strain sensor is developed based on the Ti₃C₂T_x MXene wrapped by poly(vinylidenefluoride-co-trifluoroethylene) (P(VDF-TrFE)) polymer nanofibers prepared via electrostatic spinning. Owing to the good conductivity of Ti₃C₂T_x and unique 3D reticular structure with wave shape, the resistance of Ti₃C₂T_x@P(VDF-TrFE) polymer nanofibers changes under external force, thus providing remarkable strain inducted sensing performance. As-fabricated sensor exhibits high gauge factor (GF) of 108.8 in range of 45-66% strain, rapid response of 19 ms, and outstanding durability over 1600 stretching/releasing cycles. The strain sensor is able to monitor vigorous human motions (finger or wrist bending) and subtle physiological signals (blinking, pulse or voice recognition) in real-time. Moreover, a data glove is designed to connect different gestures and expressions to form an intelligent gesture-expression control system, further confirming the practicability of our Ti₃C₂T_x@P(VDF-TrFE) strain sensors in multifunctional wearable electronic devices.

Use of Surface Penetration Technology to Fabricate Superhydrophobic Multifunctional Strain Sensors with an Ultrawide Sensing Range

Flexible sensors with wide sensing ranges require responsiveness under tiny and large strains. However, the development of strain sensors with wide detection ranges is still a great challenge due to the conflict between the tiny strain requirements of sparse conductive networks and the large strain requirement of dense conductive networks. Herein, we present a facile method for fabricating a gradient conductive network composed of sparse and dense conductive networks. The surface penetration technology in which carbon black (CB) penetrated from the natural rubber latex (NRL) glove surface to the interior was used to fabricate a gradient conductive network. The prolonged immersion time from 1 to 30 min caused the penetration depth of CB to increase from 2 to 80 μm. Moreover, CB formed hierarchical rough micro- and nanoscale structures, creating a superhydrophobic surface. The gradient conductive network of sensors produced an ultrawide detection range of strain (0.05-300%) and excellent reliability and reproducibility. The sensors can detect a wide range of human motions, from tiny (wrist pulse) to large (joint movements) motion monitoring. The flexible sensors attached to a flexible basement can be used to detect pressure in a wide detection range (1.7-2900 kPa). Pressure responsiveness was used to detect the weight, sound pressure, and dripping of tiny droplets. The sensor showed an excellent response to organic solvents, and the response intensity increased with the increasing swelling degree of the solvent for NRL.

Recent Advances in Natural Functional Biopolymers and Their Applications of Electronic Skins and Flexible Strain Sensors

In order to replace nonrenewable resources and decrease electronic waste disposal, there is a rapidly rising demand for the utilization of reproducible and degradable biopolymers in flexible electronics. Natural biopolymers have many remarkable characteristics, including light weight, excellent mechanical properties, biocompatibility, non-toxicity, low cost, etc. Thanks to these superior merits, natural functional biopolymers can be designed and optimized for the development of high-performance flexible electronic devices. Herein, we provide an insightful overview of the unique structures, properties and applications of biopolymers for electronic skins (e-skins) and flexible strain sensors. The relationships between properties and sensing performances of biopolymers-based sensors are also investigated. The functional design strategies and fabrication technologies for biopolymers-based flexible sensors are proposed. Furthermore, the research progresses of biopolymers-based sensors with various functions are described in detail. Finally, we provide some useful viewpoints and future prospects of developing biopolymers-based flexible sensors.