Chemical and spatial analysis of protein loaded PLGA microspheres for drug delivery applications

Unveiling the potentials of hydrophilic and hydrophobic polymers in microparticle systems: Opportunities and challenges in processing techniques

Conventional drug delivery systems are associated with various shortcomings, including low bioavailability and limited control over release. Biodegradable polymeric microparticles have emerged as versatile carriers in drug delivery systems addressing all these challenges. This comprehensive review explores the dynamic landscape of microparticles, considering the role of hydrophilic and hydrophobic materials. Within the continuously evolving domain of microparticle preparation methods, this review offers valuable insights into the latest advancements and addresses the factors influencing microencapsulation, which is pivotal for harnessing the full potential of microparticles. Exploration of the latest research in this dynamic field unlocks the possibilities of optimizing microencapsulation techniques to produce microparticles of desired characteristics and properties for different applications, which can help contribute to the ongoing evolution in the field of pharmaceutical science.

Microstructure Formation and Characterization of Long-Acting Injectable Microspheres: The Gateway to Fully Controlled Drug Release Pattern

Long-acting injectable microspheres have been on the market for more than three decades, but if calculated on the brand name, only 12 products have been approved by the FDA due to numerous challenges in achieving a fully controllable drug release pattern. Recently, more and more researches on the critical factors that determine the release kinetics of microspheres shifted from evaluating the typical physicochemical properties to exploring the microstructure. The microstructure of microspheres mainly includes the spatial distribution and the dispersed state of drug, PLGA and pores, which has been considered as one of the most important characteristics of microspheres, especially when comparative characterization of the microstructure (Q3) has been recommended by the FDA for the bioequivalence assessment. This review extracted the main variables affecting the microstructure formation from microsphere formulation compositions and preparation processes and highlighted the latest advances in microstructure characterization techniques. The further understanding of the microsphere microstructure has significant reference value for the development of long-acting injectable microspheres, particularly for the development of the generic microspheres.

Infliximab microencapsulation: an innovative approach for intra-articular administration of biologics in the management of rheumatoid arthritis-in vitro evaluation

Microencapsulation of the therapeutical monoclonal antibody infliximab (INF) was investigated as an innovative approach to improve its stability and to achieve formulations with convenient features for intra-articular administration. Ultrasonic atomization (UA), a novel alternative to microencapsulate labile drugs, was compared with the conventional emulsion/evaporation method (Em/Ev) using biodegradable polymers, specifically Polyactive® 1000PEOT70PBT30 [poly(ethylene-oxide-terephthalate)/poly(butylene-terephthalate); PEOT-PBT] and its polymeric blends with poly-(D, L-lactide-co-glycolide) (PLGA) RG502 and RG503 (PEOT-PBT:PLGA; 65:35). Six different formulations of spherical core-shell microcapsules were successfully developed and characterized. The UA method achieved a significantly higher encapsulation efficiency (69.7-80.25%) than Em/Ev (17.3-23.0%). Mean particle size, strongly determined by the microencapsulation method and to a lesser extent by polymeric composition, ranged from 26.6 to 49.9 µm for UA and 1.5-2.1 µm for Em/Ev. All formulations demonstrated sustained INF release in vitro for up to 24 days, with release rates modulated by polymeric composition and microencapsulation technique. Both methods preserved INF biological activity, with microencapsulated INF showing higher efficacy than commercial formulations at comparable doses regarding bioactive tumor necrosis factor-alpha (TNF-α) neutralization according to WEHI-13VAR bioassay. Microparticles' biocompatibility and extensive internalization by THP-1-derived macrophages was demonstrated. Furthermore, high in vitro anti-inflammatory activity was achieved after treatment of THP-1 cells with INF-loaded microcapsules, significatively reducing in vitro production of TNF-α and interleucine-6 (Il-6).

Mass Spectrometry Imaging of Biomaterials

The science related to biomaterials and tissue engineering accounts for a growing part of our knowledge. Surface modifications of biomaterials, their performance in vitro, and the interaction between them and surrounding tissues are gaining more and more attention. It is because we are interested in finding sophisticated materials that help us to treat or mitigate different disorders. Therefore, efficient methods for surface analysis are needed. Several methods are routinely applied to characterize the physical and chemical properties of the biomaterial surface. Mass Spectrometry Imaging (MSI) techniques are able to measure the information about molecular composition simultaneously from biomaterial and adjacent tissue. That is why it can answer the questions connected with biomaterial characteristics and their biological influence. Moreover, this kind of analysis does not demand any antibodies or dyes that may influence the studied items. It means that we can correlate surface chemistry with a biological response without any modification that could distort the image. In our review, we presented examples of biomaterials analyzed by MSI techniques to indicate the utility of SIMS, MALDI, and DESI-three major ones in the field of biomaterials applications. Examples include biomaterials used to treat vascular system diseases, bone implants with the effects of implanted material on adjacent tissues, nanofibers and membranes monitored by mass spectrometry-related techniques, analyses of drug-eluting long-acting parenteral (LAPs) implants and microspheres where MSI serves as a quality control system.

Role of the Lactide:Glycolide Ratio in PLGA Nanoparticle Stability and Release under Lysosomal Conditions for Enzyme Replacement Therapy of Lysosomal Storage Disorders

Prior studies demonstrated that encapsulation in poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) enhanced the delivery of enzymes used for replacement therapy (ERT) of lysosomal storage disorders (LSDs). This study examined how the copolymer lactide:glycolide ratio impacts encapsulation, physicochemical characteristics, stability, and release under lysosomal conditions. Hyaluronidase, deficient in mucopolysaccharidosis IX, was encapsulated in NPs synthesized using 50:50, 60:40, or 75:25 lactide:glycolide copolymers. All NPs had diameters compatible with cellular transport (≤168 nm) and polydispersity indexes (≤0.16) and ζ-potentials (≤-35 mV) compatible with colloidal stability. Yet, their encapsulation efficiency varied, with 75:25 NPs and 60:40 NPs having the lowest and highest EE, respectively (15% vs. 28%). Under lysosomal conditions, the 50:50 copolymer degraded fastest (41% in 1 week), as expected, and the presence of a targeting antibody coat did not alter this result. Additionally, 60:40 NPs destabilized fastest (<1 week) because of their smaller diameter, and 75:25 NPs did not destabilize in 4 weeks. All formulations presented burst release under lysosomal conditions (56-78% of the original load within 30 min), with 50:50 and 60:40 NPs releasing an additional small fraction after week 1. This provided 4 weeks of sustained catalytic activity, sufficient to fully degrade a substrate. Altogether, the 60:40 NP formulation is preferred given its higher EE, and 50:50 NPs represent a valid alternative, while the highest stability of 75:25 NPs may impair lysosomes. These results can guide future studies aiming to translate PLGA NP-based ERT for this and other LSDs.

Combining orthogonal measurements to unveil diclofenac encapsulation into polymeric and lipid nanocarriers

The quantification of the drug associated to nanoparticle carriers, often expressed in terms of encapsulation efficiency, is a regulatory requirement. The establishment of independent methods to evaluate this parameter provides a means for measurement validation, which is critical in providing confidence in the methods and enabling the robust characterization of nanomedicines. Chromatography is traditionally used to measure drug encapsulation into nanoparticles. Here, we describe an additional independent strategy based on analytical centrifugation. The encapsulation of diclofenac into nanocarriers was quantified based on the mass difference between placebo (i.e. unloaded) and loaded nanoparticles. This difference was estimated using particle densities measured by differential centrifugal sedimentation (DCS) and size and concentration values measured by particle tracking analysis (PTA). The proposed strategy was applied to two types of formulations, namely poly(lactic-co-glycolic acid) (PLGA) nanoparticles and nanostructured lipid carriers, which were analysed by DCS operated in sedimentation and flotation modes, respectively. The results were compared to those from high performance liquid chromatography (HPLC) measurements. Additionally, X-ray photoelectron spectroscopy analysis was used to elucidate the surface chemical composition of the placebo and loaded nanoparticles. The proposed approach enables the monitoring of batch-to-batch consistency and the quantification of diclofenac association to PLGA nanoparticles from 0.7 ng to 5 ng of drug per 1 μg of PLGA, with good linear correlation between DCS and HPLC results (R² = 0.975). Using the same approach, similar quantification in lipid nanocarriers was possible for a loading of diclofenac ≥1.1 ng per 1 μg of lipids, with results in agreement with the HPLC method (R² = 0.971). Hence, the strategy proposed here expands the analytical tools available for evaluating nanoparticles encapsulation efficiency, being thus significant for increasing the robustness of drug-delivery nanocarriers characterization.

Polyester-based long acting injectables: Advancements in molecular dynamics simulation and technological insights

Long-acting injectable (LAI) delivery technologies have enabled the development of several pharmaceutical products that improve patient health by delivering therapeutics from weeks to months. Over the last decade, due to its good biocompatibility, formulation tunability, wide range of degradation rates, and extensive clinical studies, polyester-based LAI technologies including poly(lactic-co-glycolic acid) (PLGA) have made substantial progress. Herein, we discuss PLGA properties with seminal approaches in the development of LAIs, the role of molecular dynamic simulations of polymer-drug interactions, and their effects on quality attributes. We also outline the landscape of various advanced PLGA-based and a few non-PLGA LAI technologies; their design, delivery, and challenges from laboratory scale to preclinical and clinical use; and commercial products incorporating the importance of end-user preferences.

Production of nanostructured systems: Main and innovative techniques

In the constant search for the development of more-specific and more-selective drugs, especially with regard to the challenge of encapsulating hydrophilic molecules, polymer nanotechnologies are remarkable for their biocompatible and biodegradable properties. The most-used nanoencapsulation methods consist of emulsification procedures, where emulsified droplets of a given polymer and drug solidify into nanoparticles after solvent extraction from the polymeric phase. This review introduces conventional emulsification methods but also highlights new emulsification technologies such as microfluidics, membrane emulsification and other techniques, including spray drying, inkjet printing and electrospraying.

Ultrathin, elastic, and self-adhesive nanofiber bio-tape: An intraoperative drug-loading module for ureteral stents with localized and controlled drug delivery properties for customized therapy

During the postoperative management of urinary diseases, oral or intravenous administration of drugs and implanting ureteral stents are usually required, making localized drug delivery by ureteral stent a precise and effective medication strategy. In the traditional drug loading method, the drug was premixed in the implants in production lines and the versatility of drugs was restricted. However, the complex situation in the urinary system fails the possibility of finding a “one fits all” medication plan, and the intraoperative drug-loading of implants is highly desired to support customized therapy. Here, we designed an ultrathin (8 μm), elastic, and self-adhesive nanofiber bio-tape (NFBT) that can easily encapsulate drugs on the stent surface for controllable localized drug delivery. The NFBT exhibited high binding strength to a ureteral stent, a sustained release over 7 d in PBS for hydrophilic drug, and a zero-order release curve over 28 days for the hydrophobic drug nitrofurantoin (NFT). Further in vivo experiments using a porcine ureteral tract infection model demonstrated that NFBT loaded with NFT could significantly reduce the bacterial concentration in urine. The total amount of NFT delivered by the NFBT was about 2.68 wt% of the recommended dose for the systemic administration.

•

An intra operation drug-loading strategy and drug carrier for personalized post-operation management of urinary disease.

•

The NFBT is ultrathin (∼8 μm) with enough binding stress to resist displacement bought by ureteral peristalsis.

•

In vivo antibacterial rate >99.9% for 28 d (porcine UTI model), with 2.68 wt% of the systemically administration dosage.

Multimodal imaging of drug and excipients in rat lungs following an inhaled administration of controlled-release drug laden PLGA microparticles

Controlled-release formulations, in the form of micro- or nanoparticles, are increasingly attractive to the pharmaceutical industry for drug delivery. For respiratory illnesses, controlled-release microparticle formulations provide an opportunity to deliver a higher percentage of an inhaled medicament dose to the lung, thus potentially reducing the therapeutic dose, frequency of dosing, and minimising side-effects. We describe the use of a multimodal approach consisting of MALDI MS imaging, 3D depth profiling TOF-SIMS analysis, and histopathology to monitor the distribution of drug and excipients in sections taken from excised rat lungs following an inhaled administration of drug-laden microparticles. Following a single dose, the administered drug was detected in the lung via both MALDI MS and TOF-SIMS over a range of time points. Both imaging techniques enabled the characterisation of the distribution and retention of drug particles and identified differences in the capabilities of both imaging modalities. Histochemical staining of consecutive sections was used to provide biological context to the findings and will also be discussed in this presentation. We demonstrate how this multimodal approach could be used to help increase our understanding of the use of controlled release microparticles.

Large fuzzy biodegradable polyester microspheres with dopamine deposition enhance cell adhesion and bone regeneration in vivo

The biodegradable polymer microparticles with different surface morphology and chemical compositions may influence significantly the behaviors of cells, and thereby further the performance of tissue regeneration in vivo. In this study, multi-stage hierarchical textures of poly(D,L-lactic-co-glycolide) (PLGA)/PLGA-b-PEG (poly(ethylene glycol)) microspheres with a diameter as large as 50-100 μm are fabricated based on interfacial instability of an emulsion. The obtained fuzzy structures on the microspheres are sensitive to annealing, which are changed gradually to a smooth one after treatment at 37 °C for 6 d or 80 °C for 1 h. The surface microstructures that are chemically dominated by PEG can be stabilized against annealing by dopamine deposition. By the combination use of annealing and dopamine deposition, a series of microspheres with robust surface topologies are facilely prepared. The fuzzy microstructures and dopamine deposition show a synergetic role to enhance cell-material interaction, leading to a larger number of adherent bone marrow-derived mesenchymal stem cells (BMSCs), A549 and MC 3T3 cells. The fuzzy microspheres with dopamine deposition can significantly promote bone regeneration 12 w post surgery in vivo, as revealed by micro-CT, histological, western blotting and RT-PCR analyses.

Biocompatibility and bioactivity of an FGF-loaded microsphere-based bilayer delivery system

Many drug delivery systems rely on degradation or dissolution of the carrier material to regulate release. In cases where mechanical support is required during regeneration, this necessitates composite systems in which the mechanics of the implant are decoupled from the drug release profile. To address this need, we developed a system in which microspheres (MS) were sequestered in a defined location between two nanofibrous layers. This bilayer delivery system (BiLDS) enables simultaneous structural support and decoupled release profiles. To test this new system, PLGA (poly-lactide-co-glycolic acid) microspheres were prepared using a water-in-oil-in-water (w/o/w) emulsion technique and incorporated Alexa Fluor-tagged bovine serum albumin (BSA) and basic fibroblast growth factor (bFGF). These MS were secured in a defined pocket between two polycaprolactone (PCL) nanofibrous scaffolds, where the layered scaffolds provide a template for new tissue formation while enabling independent and local release from the co-delivered MS. Scanning electron microscopy (SEM) images showed that the assembled BiLDS could localize and retain MS in the central pocket that was surrounded by a continuous seal formed along the margin. Cell viability and proliferation assays showed enhanced cell activity when exposed to BiLDS containing Alexa Fluor-BSA/bFGF-loaded MS, both in vitro and in vivo. MS delivered via the BiLDS system persisted in a localized area after subcutaneous implantation for at least 4 weeks, and bFGF release increased colonization of the implant. These data establish the BiLDS technology as a sustained in vivo drug delivery platform that can localize protein and other growth factor release to a surgical site while providing a structural template for new tissue formation. STATEMENT OF SIGNIFICANCE: Localized and controlled delivery systems for the sustained release of drugs are essential. Many strategies have been developed for this purpose, but most rely on degradation (and loss of material properties) for delivery. Here, we developed a bilayer delivery system (BiLDS) that decouples the physical properties of a scaffold from its delivery kinetics. For this, biodegradable PLGA microspheres were sequestered within a central pocket of a slowly degrading nanofibrous bilayer. Using this device, we show enhanced cell activity with FGF delivery from the BiLDS both in vitro and in vivo. These data support that BiLDS can localize sustained protein and biofactor delivery to a surgical site while also serving as a mechanical scaffold for tissue repair and regeneration.

Inhomogeneous Distribution of Components in Solid Protein Pharmaceuticals: Origins, Consequences, Analysis, and Resolutions

Successful development of stable solid protein formulations usually requires the addition of one or several excipients to achieve optimal stability. In these products, there is a potential risk of an inhomogeneous distribution of the various ingredients, specifically the ratio of protein and stabilizer may vary. Such inhomogeneity can be detrimental for stability but is mostly neglected in literature. In the past, it was challenging to analyze inhomogeneous component distribution, but recent advances in analytical techniques have revealed new options to investigate this phenomenon. This paper aims to review fundamental aspects of the inhomogeneous distribution of components of freeze-dried and spray-dried protein formulations. Four key topics will be presented and discussed, including the sources of component inhomogeneity, its consequences on protein stability, the analytical methods to reveal component inhomogeneity, and possible solutions to prevent or mitigate inhomogeneity.

Enzyme-encapsulating polymeric nanoparticles: A potential adjunctive therapy in Pseudomonas aeruginosa biofilm-associated infection treatment

Pseudomonas aeruginosa is a pathogen known to be associated with a variety of diseases and conditions such as cystic fibrosis, chronic wound infections, and burn wound infections. A novel approach was developed to combat the problem of biofilm antibiotic tolerance by reverting biofilm bacteria back to the planktonic mode of growth. This reversion was achieved through the enzymatic depletion of available pyruvate using pyruvate dehydrogenase, which induced biofilm bacteria to disperse from the surface-associated mode of growth into the surrounding environment. However, direct use of the enzyme in clinical settings is not practical as the enzyme is susceptible to denaturation under various storage conditions. We hypothesize that by encapsulating pyruvate dehydrogenase into degradable, biocompatible poly(lactic-co-glycolic) acid nanoparticles, the activity of the enzyme can be extended to deplete available pyruvate and induce dispersion of mature Pseudomonas aeruginosa biofilms. Several particle formulations were attempted in order to permit the use of the smallest dose of nanoparticles while maintaining pyruvate dehydrogenase activity for an extended time length. The nanoparticles synthesized using the optimal formulation showed an average size of 266.7 ± 1.8 nm. The encapsulation efficiency of pyruvate dehydrogenase was measured at 17.9 ± 1.4%. Most importantly, the optimal formulation dispersed biofilms and exhibited enzymatic activity after being stored at 37 °C for 6 days.

Selective Cytotoxicity to HER2 Positive Breast Cancer Cells by Saporin-Loaded Nanobody-Targeted Polymeric Nanoparticles in Combination with Photochemical Internalization

In cancer treatment, polymeric nanoparticles (NPs) can serve as a vehicle for the delivery of cytotoxic proteins that have intracellular targets but that lack well-defined mechanisms for cellular internalization, such as saporin. In this work, we have prepared PEGylated poly(lactic acid- co-glycolic acid- co-hydroxymethyl glycolic acid) (PLGHMGA) NPs for the selective delivery of saporin in the cytosol of HER2 positive cancer cells. This selective uptake was achieved by decorating the surface of the NPs with the 11A4 nanobody that is specific for the HER2 receptor. Confocal microscopy observations showed rapid and extensive uptake of the targeted NPs (11A4-NPs) by HER2 positive cells (SkBr3) but not by HER2 negative cells (MDA-MB-231). This selective uptake was blocked upon preincubation of the cells with an excess of nanobody. Nontargeted NPs (Cys-NPs) were not taken up by either type of cells. Importantly, a dose-dependent cytotoxic effect was only observed on SkBr3 cells when these were treated with saporin-loaded 11A4-NPs in combination with photochemical internalization (PCI), a technique that uses a photosensitizer and local light exposure to facilitate endosomal escape of entrapped nanocarriers and biomolecules. The combined use of saporin-loaded 11A4-NPs and PCI strongly inhibited cell proliferation and decreased cell viability through induction of apoptosis. Also the cytotoxic effect could be reduced by an excess of nanobody, reinforcing the selectivity of this system. These results suggest that the combination of the targeting nanobody on the NPs with PCI are effective means to achieve selective uptake and cytotoxicity of saporin-loaded NPs.

A Novel Human Papillomavirus 16 L1 Pentamer-Loaded Hybrid Particles Vaccine System: Influence of Size on Immune Responses

Cervical cancer remains the second-most prevalent female malignancy around the world, leading to a great majority of cancer-related mortality that occurs mainly in developing countries. Developing an effective and low-cost vaccine against human papillomavirus (HPV) infection, especially in medically underfunded areas, is urgent. Compared with vaccines based on HPV L1 viruslike particles (VLPs) in the market, recombinant HPV L1 pentamer expressed in Escherichia coli represents a promising and potentially cost-effective vaccine for preventing HPV infection. Hybrid particles comprising a polymer core and lipid shell have shown great potential compared to conventional aluminum salts adjuvant and is urgently needed for HPV L1 pentamer vaccines. It is well-reported that particle sizes are crucial in regulating immune responses. Nevertheless, reports on the relationship between the particulate size and the resultant immune response have been in conflict, and there is no answer to how the size of particles regulates specific immune response for HPV L1 pentamer-based candidate vaccines. Here, we fabricated HPV 16 L1 pentamer-loaded poly(d,l-lactide- co-glycolide) (PLGA)/lecithin hybrid particles with uniform sizes (0.3, 1, and 3 μm) and investigated the particle size effects on antigen release, activation of lymphocytes, dendritic cells (DCs) activation and maturation, follicular helper CD4⁺ T (TFH) cells differentiation, and release of pro-inflammatory cytokines and chemokines. Compared with the other particle sizes, 1 μm particles induced more powerful antibody protection and yielded more persistent antibody responses, as well as more heightened anamnestic responses upon repeat vaccination. The superior immune responses might be attributed to sustainable antigen release and robust antigen uptake and transport and then further promoted a series of cascade reactions, including enhanced DCs maturation, increased lymphocytes activation, and augmented TFH cells differentiation in draining lymph nodes (DLNs). Here, a powerful and economical platform for HPV vaccine and a comprehensive understanding of particle size effect on immune responses for HPV L1 pentamer-based candidate vaccines are provided.

Characterization techniques for nanoparticles: comparison and complementarity upon studying nanoparticle properties

Nanostructures have attracted huge interest as a rapidly growing class of materials for many applications. Several techniques have been used to characterize the size, crystal structure, elemental composition and a variety of other physical properties of nanoparticles. In several cases, there are physical properties that can be evaluated by more than one technique. Different strengths and limitations of each technique complicate the choice of the most suitable method, while often a combinatorial characterization approach is needed. In addition, given that the significance of nanoparticles in basic research and applications is constantly increasing, it is necessary that researchers from separate fields overcome the challenges in the reproducible and reliable characterization of nanomaterials, after their synthesis and further process (e.g. annealing) stages. The principal objective of this review is to summarize the present knowledge on the use, advances, advantages and weaknesses of a large number of experimental techniques that are available for the characterization of nanoparticles. Different characterization techniques are classified according to the concept/group of the technique used, the information they can provide, or the materials that they are destined for. We describe the main characteristics of the techniques and their operation principles and we give various examples of their use, presenting them in a comparative mode, when possible, in relation to the property studied in each case.

Improved delivery of PLGA microparticles and microparticle-cell scaffolds in clinical needle gauges using modified viscosity formulations

Polymer microparticles are widely used as acellular drug delivery platforms in regenerative medicine, and have emerging potential as cellular scaffolds for therapeutic cell delivery. In the clinic, PLGA microparticles are typically administered intramuscularly or subcutaneously, with the clinician and clinical application site determining the precise needle gauge used for delivery. Here, we explored the role of needle diameter in microparticle delivery yield, and develop a modified viscosity formulation to improve microparticle delivery across a range of clinically relevant needle diameters. We have identified an optimal biocompatible formulation containing 0.25% pluronic F127 and 0.25% carboxymethyl cellulose, which can increase delivery payload to 520% across needle gauges 21-30G, and note that needle diameter impacts delivery efficacy. We use this formulation to increase the delivery yield of PLGA microparticles, and separately, PLGA-cell scaffolds supporting viable mesenchymal stem cells (MSCs), demonstrating the first in vitro delivery of this cell scaffold system. Together, these results highlight an optimal formulation for the delivery of microparticle and microparticle-cell scaffolds, and illustrate how careful choice of delivery formulation and needle size can dramatically impact delivery payload.

Drug delivery across length scales

Over the last century, there has been a dramatic change in the nature of therapeutic, biologically active molecules available to treat disease. Therapies have evolved from extracted natural products towards rationally designed biomolecules, including small molecules, engineered proteins and nucleic acids. The use of potent drugs which target specific organs, cells or biochemical pathways, necessitates new tools which can enable controlled delivery and dosing of these therapeutics to their biological targets. Here, we review the miniaturisation of drug delivery systems from the macro to nano-scale, focussing on controlled dosing and controlled targeting as two key parameters in drug delivery device design. We describe how the miniaturisation of these devices enables the move from repeated, systemic dosing, to on-demand, targeted delivery of therapeutic drugs and highlight areas of focus for the future.

Time-of-flight secondary ion mass spectrometry analyses of vancomycin

As an antibiotic that prevents and treats infections caused by Gram-positive bacteria such as Staphylococcus aureus, vancomycin incorporated in a biodegradable polymer poly(lactide-co-glycolide) provides opportunities to construct controlled-release drug delivery systems. Developments associated with this promising system have been largely concentrated on areas of drug delivery kinetics and biodegradability. In order to provide surface analytical approaches to this important system, the authors demonstrate applicability of time-of-flight secondary ion mass spectrometry (TOF-SIMS) in three-dimensional molecular imaging for a model system consisting of alternating layers of ploy(lactide-co-glycolide) and vancomycin. TOF-SIMS imaging clarified that the two chemicals can undergo phase separation when dimethyl sulfoxide is used as the solvent. The authors identified two diagnostic ions that are abundant and structural moieties of vancomycin. The results on TOF-SIMS imaging and depth profiling vancomycin provide useful information for further applications of TOF-SIMS in the development of antibiotic drug delivery systems involving the use of vancomycin.

Effect of surfactant on Pseudomonas aeruginosa colonization of polymer microparticles and flat films

Micro- and nanoparticles are of great interest because of their potential for trafficking into the body for applications such as low-fouling coatings on medical devices, drug delivery in pharmaceutics and cell carriers in regenerative medicine strategies. Particle production often relies on the use of surfactants to promote stable droplet formation. However, the presence of residual surfactant has been shown to complicate the surface chemistry and resultant properties. When forming particles from polymerizable monomer droplets, these polymeric surfactant chains can become physically entangled in the particle surface. Due to the key role of the outermost layers of the surface in biomaterial interactions, the surface chemistry and its influence on cells needs to be characterized. This is the first study to assess surfactant retention on microfluidic produced particles and its effect on bacterial attachment; surfactant contaminated microparticles are compared with flat films which are surfactant-free. Polymeric microparticles with an average diameter of 76 ± 1.7 μm were produced by using a T-junction microfluidic system to form monomer droplets which were subsequently photopolymerized. Acrylate based monomer solutions were found to require 2 wt% PVA to stabilize droplet formation. ToF-SIMS was employed to assess the surface chemistry revealing the presence of PVA in a discontinuous layer on the surface of microparticles which was reduced but not removed by solvent washing. The effect of PVA on bacterial (Pseudomonas aeruginosa) attachment was quantified and showed reduction as a function of the amount of PVA retained at the surface. The insights gained in this study help define the structure–function relationships of the particulate biomaterial architecture, supporting materials design with biofilm control.

The attachment of Pseudomonas aeruginosa on microfluidic produced particles was shown to reduce as a function of PVA concentration retained at the surface, enabling novel structure–function relationships of biomaterial architecture.

Microfluidic generation of egg-derived protein microcarriers for 3D cell culture and drug delivery

Microcarriers have a demonstrated value for biomedical applications, in particular for drug delivery and three-dimensional cell culture. Attempts to develop this technique tend to focus on the fabrication of functional microparticles by using convenient methods with innovative but accessible materials. Inspired by the process of boiling eggs in everyday life, which causes the solidification of egg proteins, we present a new microfluidic "cooking" approach for the generation of egg-derived microcarriers for cell culture and drug delivery. As the egg emulsion droplets are formed with exquisite precision during the microfluidic emulsification, the resultant egg microcarriers present highly monodisperse and uniform morphologies at the size range of hundred microns to one millimeter. Benefiting from the excellent biocompatibility of the egg protein components, the obtained microcarriers showed good performances of cell adherence and growth. In addition, after a freezing treatment, the egg microcarriers were shown to have interconnected porous structures throughout their whole sphere, could absorb and load different kinds of drugs or other active molecules, and work as microcarrier-based delivery systems. These features point to the potential value of the microfluidic egg microcarriers in biomedicine.

Visualizing molecular distributions for biomaterials applications with mass spectrometry imaging: a review

Mass spectrometry imaging (MSI) is a rapidly emerging field that is continually finding applications in new and exciting areas. The ability of MSI to measure the spatial distribution of molecules at or near the surface of complex substrates makes it an ideal candidate for many applications, including those in the sphere of materials chemistry. Continual development and optimization of both ionization sources and analyzer technologies have resulted in a wide array of MSI tools available, both commercially available and custom-built, with each configuration possessing inherent strengths and limitations. Despite the unique potential of MSI over other chemical imaging methods, their potential and application to (bio)materials science remains in our view a largely underexplored avenue. This review will discuss these techniques enabling high parallel molecular detection, focusing on those with reported uses in (bio)materials chemistry applications and highlighted with select applications. Different technologies are presented in three main sections; secondary ion mass spectrometry (SIMS) imaging, matrix-assisted laser desorption ionization (MALDI) MSI, and emerging MSI technologies with potential for biomaterial analysis. The first two sections (SIMS and MALDI) discuss well-established methods that are continually evolving both in technological advancements and in experimental versatility. In the third section, relatively new and versatile technologies capable of performing measurements under ambient conditions will be introduced, with reported applications in materials chemistry or potential applications discussed. The aim of this review is to provide a concise resource for those interested in utilizing MSI for applications such as biomimetic materials, biological/synthetic material interfaces, polymer formulation and bulk property characterization, as well as the spatial and chemical distributions of nanoparticles, or any other molecular imaging application requiring broad chemical speciation.

Dual delivery nanosystem for biomolecules. Formulation, characterization, and in vitro release

Because of the biocompatible and biodegradable properties of poly (lactic-co-glycolic acid) (PLGA), nanoparticles (NPs) based on this polymer have been widely studied for drug/biomolecule delivery and long-term sustained-release. In this work, two different formulation methods for lysozyme-loaded PLGA NPs have been developed and optimized based on the double-emulsion (water/oil/water, W/O/W) solvent evaporation technique. They differ mainly in the phase in which the surfactant (Pluronic^® F68) is added: water (W-F68) and oil (O-F68). The colloidal properties of these systems (morphology by SEM and STEM, hydrodynamic size by DLS and NTA, electrophoretic mobility, temporal stability in different media, protein encapsulation, release, and bioactivity) have been analyzed. The interaction surfactant-protein depending on the formulation procedure has been characterized by surface tension and dilatational rheology. Finally, cellular uptake by human mesenchymal stromal cells and cytotoxicity for both systems have been analyzed. Spherical hard NPs are made by the two methods However, in one case, they are monodisperse with diameters of around 120nm (O-F68), and in the other case, a polydisperse system of NPs with diameters between 100 and 500nm is found (W-F68). Protein encapsulation efficiency, release and bioactivity are maintained better by the W-F68 formulation method. This multimodal system is found to be a promising "dual delivery" system for encapsulating hydrophilic proteins with strong biological activity at the cell-surface and cytoplasmic levels.

A dual-application poly (dl-lactic-co-glycolic) acid (PLGA)-chitosan composite scaffold for potential use in bone tissue engineering

The development of patient-friendly alternatives to bone-graft procedures is the driving force for new frontiers in bone tissue engineering. Poly (dl-lactic-co-glycolic acid) (PLGA) and chitosan are well-studied and easy-to-process polymers from which scaffolds can be fabricated. In this study, a novel dual-application scaffold system was formulated from porous PLGA and protein-loaded PLGA/chitosan microspheres. Physicochemical and in vitro protein release attributes were established. The therapeutic relevance, cytocompatibility with primary human mesenchymal stem cells (hMSCs) and osteogenic properties were tested. There was a significant reduction in burst release from the composite PLGA/chitosan microspheres compared with PLGA alone. Scaffolds sintered from porous microspheres at 37 °C were significantly stronger than the PLGA control, with compressive strengths of 0.846 ± 0.272 MPa and 0.406 ± 0.265 MPa, respectively (p < 0.05). The formulation also sintered at 37 °C following injection through a needle, demonstrating its injectable potential. The scaffolds demonstrated cytocompatibility, with increased cell numbers observed over an 8-day study period. Von Kossa and immunostaining of the hMSC-scaffolds confirmed their osteogenic potential with the ability to sinter at 37 °C in situ.

Biodegradable nitric oxide precursor-loaded micro- and nanoparticles for the treatment of Staphylococcus aureus biofilms

Bacteria in biofilms are more difficult to eradicate than planktonic bacteria and result in treatment challenges for many chronic infectious diseases. Nitric oxide (NO) is an endogenous molecule that offers potential as an alternative to conventional antibiotics; however its sustained topical delivery to biofilms is not readily achieved. With this in mind, we report the development of biodegradable poly(lactide-co-glycolide) (PLGA) based microparticles (MP) and nanoparticles (NP) for encapsulation of the NO precursor isosorbide mononitrate (ISMN) and the controlled delivery to Staphylococcus aureus (S. aureus) biofilms. Firstly, water-in-oil-in-water (w/o/w) emulsification/solvent evaporation methods for PLGA NP and MP syntheses were experimentally optimised with respect to particle size and ISMN loading/encapsulation efficiency. The influence of various experiment parameters, such as the volume of inner aqueous phase, concentration of surfactants, mixing time on the particle size, drug loading and encapsulation efficiency were investigated systematically. Both PLGA MP and NP formulations enabled sustained ISMN release in physiological media over 3 to 5 days. PLGA MP with diameters of ∼3 μm and ISMN loading of 2.2% (w/w) were identified as the optimum delivery system and demonstrated significant antibacterial activity in S. aureus biofilms. This behaviour is considered to be due to targeted biofilm delivery through a combination of effective penetration and sustained release of ISMN.

A reformative shear precipitation procedure for the fabrication of vancomycin-loaded poly(lactide-co-glycolide) microspheres

This study reports the encapsulation of vancomycin, as a model hydrophilic drug, into poly(lactide-co-glycolide) microspheres using a novel reformative shear precipitation procedure. In contrast to the external aqueous phase used in the conventional microencapsulation technique based on emulsion solvent evaporation/extraction, the reformative shear precipitation procedure explored in this study uses a shear medium composed of glycerol as the viscous medium and ethanol as polymer antisolvent, which is relatively immiscible with the hydrophilic drug. This limits drug diffusion and leads to rapid microsphere solidification, which allows a large proportion of the hydrophilic drug to be encapsulated within the microspheres. The influence of various processing parameters, including polymer concentration, volume ratio of ethanol to glycerol in the shear medium, volume of aqueous drug solution, initial drug loading, and injecting rate of the drug-polymer emulsion, on the encapsulation efficiency and characteristics of resulting microspheres were investigated. The morphology and release characteristics, as well as mechanical, in vitro and in vivo behaviour of vancomycin-loaded poly(lactide-co-glycolide) microspheres prepared using the novel procedure were also investigated. The results demonstrated that the reformative shear precipitation procedure could achieve the loading of hydrophilic drugs into poly(lactide-co-glycolide) microspheres with high encapsulation efficiency, and the success of the procedure was largely influenced by the volume ratio of ethanol to glycerol in the shear medium. Vancomycin-loaded poly(lactide-co-glycolide) microspheres prepared using this procedure demonstrated favourable mechanical characteristics, antibacterial activity, and in vivo degradation behaviour which suggested their suitability for use as a sustained delivery system.

Encapsulation-free controlled release: Electrostatic adsorption eliminates the need for protein encapsulation in PLGA nanoparticles

Encapsulation of therapeutic molecules within polymer particles is a well-established method for achieving controlled release, yet challenges such as low loading, poor encapsulation efficiency, and loss of protein activity limit clinical translation. Despite this, the paradigm for the use of polymer particles in drug delivery has remained essentially unchanged for several decades. By taking advantage of the adsorption of protein therapeutics to poly(lactic-co-glycolic acid) (PLGA) nanoparticles, we demonstrate controlled release without encapsulation. In fact, we obtain identical, burst-free, extended-release profiles for three different protein therapeutics with and without encapsulation in PLGA nanoparticles embedded within a hydrogel. Using both positively and negatively charged proteins, we show that short-range electrostatic interactions between the proteins and the PLGA nanoparticles are the underlying mechanism for controlled release. Moreover, we demonstrate tunable release by modifying nanoparticle concentration, nanoparticle size, or environmental pH. These new insights obviate the need for encapsulation and offer promising, translatable strategies for a more effective delivery of therapeutic biomolecules.

Nanodelivery systems for enhancing the immunostimulatory effect of CpG oligodeoxynucleotides

Synthetic oligodeoxynucleotides containing immunostimulatory CpG motif mimic bacterial DNA and are potent activator of innate and adaptive immune responses. Therefore, CpG ODNs have significant potentials as immunotherapeutic agent for treatment of infectious diseases, allergy and cancer. Many clinical trials involving CpG ODNs either used alone or as adjuvant have been initiated. However, delivery of CpG ODNs to target sites still remains a great challenge due to their extreme susceptibility to nuclease degradation in serum and poor cellular uptake. Chemical modification of CpG ODNs backbone can protect them against degradation by nucleases, but have raised concern regarding several severe side effects. Development of efficient CpG ODNs delivery systems to address these issues and enhance their immunostimulatory effect are highly desirable. In recent years, the emergence of nanotechnology has provided unprecedented opportunities to encapsulate CpG ODN into various nanocarriers or synthesize CpG ODNs nanostructures. This review provides an overview of the delivery systems based on nanomaterials and nanostructures newly developed for enhancing the immunostimulatory effect of CpG ODNs, together with a brief discussion on perspectives for future studies in this field.

Targeting of the kynurenic acid across the blood-brain barrier by core-shell nanoparticles

Core-shell nanoparticles (CSNPs) were developed to get over therapeutic amount of kynurenic acid (KYNA) across the blood-brain barrier (BBB). Bovine serum albumin (BSA) was used as core for encapsulation of KYNA and the BSA/KYNA composite was finally encapsulated by poly(allylamine) hydrochloride (PAH) polymer as shell. In the interest of the optimization of the synthesis the BSA and KYNA interaction was studied by two-dimensional surface plasmon resonance (SPR) technique as well. The average size of d~100 nm was proven by dynamic light scattering (DLS) and transmission electron microscopy (TEM), while the structure of the composites was characterized by fluorescence (FL) and circular dichroism (CD) spectroscopy. The in vitro release properties of KYNA were investigated by a vertical diffusion cell at 25.0 °C and 37.5 °C and the kinetic of the release were discussed. The penetration capacity of the NPs into the central nervous system (CNS) was tested by an in vitro BBB model. The results demonstrated that the encapsulated KYNA had significantly higher permeability compared to free KYNA molecules. In the neurobiological serial of in vivo experiments the effects of peripherally administered KYNA with CSNPs were studied in comparison with untreated KYNA. These results clearly proved that KYNA in the CSNPs, administrated peripherally is suitable to cross the BBB and to induce electrophysiological effects within the CNS. As the neuroprotective properties of KYNA nowadays are proven, the importance of the results is obvious.

Raman imaging of drug delivery systems

This review article includes an introduction to the principals of Raman spectroscopy, an outline of the experimental systems used for Raman imaging and the associated important considerations and limitations of this method. Common spectral analysis methods are briefly described and examples of interesting published studies which utilised Raman imaging of pharmaceutical and biomedical devices are discussed, along with summary tables of the literature at this point in time.

Quantitative three-dimensional analysis of poly (lactic-co-glycolic acid) microsphere using hard X-ray nano-tomography revealed correlation between structural parameters and drug burst release

The objective of this study was to investigate the use of transmission hard X-ray nano-computed-tomography (nano-CT) for characterization of the pore structure and drug distribution in poly (lactic-co-glycolic acid) (PLGA) microspheres encapsulating bovine serum albumin and to study the correlation between drug distribution and burst release. The PLGA microspheres were fabricated using a double-emulsion method. The results of pore structure analysis accessed with nano-CT were compared with those acquired by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). Surface pore interconnectivity and surface protein interconnectivity were obtained using combined nano-CT and pixel analysis. The correlation between surface protein interconnectivity with the initial burst release across various tested formulations was also analyzed. The size, shape, and distribution of the pores and protein could be clearly observed in the whole microsphere using nano-CT, whereas only the sectional information was observed using SEM or CLSM. Interconnected pores and surface connected pores could be clearly distinguished in nano-CT, which enables the quantitative analysis of surface pore interconnectivity and surface protein interconnectivity. The surface protein interconnectivity in different formulations correlated well with the burst release at 5-10h. Nano-CT provided a nondestructive, high-resolution, and three-dimensional analysis method to characterize the porous microsphere.

Preparation and properties of BSA-loaded microspheres based on multi-(amino acid) copolymer for protein delivery

A multi-(amino acid) copolymer (MAC) based on ω-aminocaproic acid, γ-aminobutyric acid, L-alanine, L-lysine, L-glutamate, and hydroxyproline was synthetized, and MAC microspheres encapsulating bovine serum albumin (BSA) were prepared by a double-emulsion solvent extraction method. The experimental results show that various preparation parameters including surfactant ratio of Tween 80 to Span 80, surfactant concentration, benzyl alcohol in the external water phase, and polymer concentration had obvious effects on the particle size, morphology, and encapsulation efficiency of the BSA-loaded microspheres. The sizes of BSA-loaded microspheres ranged from 60.2 μm to 79.7 μm, showing different degrees of porous structure. The encapsulation efficiency of BSA-loaded microspheres also ranged from 38.8% to 50.8%. BSA release from microspheres showed the classic biphasic profile, which was governed by diffusion and polymer erosion. The initial burst release of BSA from microspheres at the first week followed by constant slow release for the next 7 weeks were observed. BSA-loaded microspheres could degrade gradually in phosphate buffered saline buffer with pH value maintained at around 7.1 during 8 weeks incubation, suggesting that microsphere degradation did not cause a dramatic pH drop in phosphate buffered saline buffer because no acidic degradation products were released from the microspheres. Therefore, the MAC microspheres might have great potential as carriers for protein delivery.

Dual release of dexamethasone and TGF-β3 from polymeric microspheres for stem cell matrix accumulation in a rat disc degeneration model

Low back pain is frequently caused by nucleus pulposus (NP) degeneration. Tissue engineering is a powerful therapeutic strategy which could restore the normal biomechanical motion of the human spine. Previously we reported that a new nanostructured three-dimensional poly(lactide-co-glycolide) (PLGA) microsphere, which is loaded with dexamethasone and growth factor embedded heparin/poly(l-lysine) nanoparticles via a layer-by-layer system, was an effective cell carrier in vitro for NP tissue engineering. This study aimed to investigate whether the implantation of adipose-derived stem cell (ADSC)-seeded PLGA microspheres into the rat intervertebral disc could regenerate the degenerated disc. Changes in disc height by plain radiograph, T2-weighted signal intensity in magnetic resonance imaging (MRI), histology, immunohistochemistry and matrix-associated gene expression were evaluated in normal controls (NCs) (without operations), a degeneration control (DC) group (with needle puncture, injected only with Dulbecco's modified Eagle's medium), a PLGA microspheres (PMs) treatment group (with needle puncture, PLGA microspheres only injection), and PLGA microspheres loaded with ADSCs treatment (PMA) group (with needle puncture, PLGA microspheres loaded with ADSC injection) for a 24-week period. The results showed that at 24 weeks post-transplantation, the PM and PMA groups regained disc height values of ∼63% and 76% and MRI signal intensities of ∼47% and 76%, respectively, compared to the NC group. Biochemistry, immunohistochemistry and gene expression analysis also indicated the restoration of proteoglycan accumulation in the discs of the PM and PMA groups. However, there was almost no restoration of proteoglycan accumulation in the discs of the DC group compared with the PM and PMA groups. Taken together, these data suggest that ADSC-seeded PLGA microspheres could partly regenerate the degenerated disc in vivo after implantation into the rat degenerative intervertebral disc.

Challenges in the characterization of plasma-processed three-dimensional polymeric scaffolds for biomedical applications

Low-temperature plasmas offer a versatile method for delivering tailored functionality to a range of materials. Despite the vast array of choices offered by plasma processing techniques, there remain a significant number of hurdles that must be overcome to allow this methodology to realize its full potential in the area of biocompatible materials. Challenges include issues associated with analytical characterization, material structure, plasma processing, and uniform composition following treatment. Specific examples and solutions are presented utilizing results from analyses of three-dimensional (3D) poly(ε-caprolactone) scaffolds treated with different plasma surface modification strategies that illustrate these challenges well. Notably, many of these strategies result in 3D scaffolds that are extremely hydrophilic and that enhance human Saos-2 osteoblast cell growth and proliferation, which are promising results for applications including tissue engineering and advanced biomedical devices.