Review on materials & methods to produce controlled release coated urea fertilizer

A biodegradable multifunctional pectin-montmorillonite fertilizer coating: Controlled-release, water-retention and soil-cementation

Coated fertilizers have been widely used to improve fertility in barren land. However, improving soil structure and water-retention capacity is also essential for arid and semi-arid areas with sandy soils to promote crop growth. Most currently available coated fertilizers rarely meet these requirements, limiting their application scope. Therefore, this study "tailored" pectin-montmorillonite (PM) multifunctional coatings for arid areas, featuring intercalation reactions and nanoscale entanglement between pectin and montmorillonite via hydrogen bonding and electrostatic and van der Waals forces. Notably, PM coatings have demonstrated an effective "relay" model of action. First, the PM-50 coating could act as a "shield" to protect urea pills, increasing the mechanical strength (82.12 %). Second, this coating prolonged the release longevity of urea (<0.5 h to 15 days). Further, the remaining coating performed a water-retention function. Subsequently, the degraded coating improved the soil properties. Thus, this coating facilitated the growth of wheat seedlings in a simulated arid environment. Moreover, the cytotoxicity test, life cycle assessment, and soil biodegradation experiment showed that the PM coating exhibited minimal environmental impact. Overall, the "relay" model of PM coating overcomes the application limitations of traditional coated fertilizers and provides a sustainable strategy for developing coating materials in soil degradation areas.

Impact of microplastic residues from polyurethane films on crop growth: Unraveling insights through transcriptomics and metabolomics analysis

The utilisation of coated controlled-release fertilizers (CRFs) leads to the persistence of residual plastic films in agricultural soils, posing a potential threat to crop health. This study investigates the impacts of four residual films (0.39 %, w/w) derived from CRFs in soil, including petrochemical polyether, bio-based polyether, castor oil polyester, and wheat straw polyester polyurethane on wheat growth. This study found that PecPEUR significantly reduced wheat plant height, stem diameter, leaf area, and aboveground fresh weight by 24.8 %, 20.2 %, and 25.7 %. Through an in-depth exploration of transcriptomics and metabolomics, it has been discovered that all residual films disrupted glycolysis-related metabolic pathways in wheat roots, affecting seedling growth. Among them, PecPEUR significantly reduced the fresh weight of aboveground parts by 20.5 %. In contrast, polyester polyurethane residue had no discernible impact on aboveground wheat growth. This was attributed to the enrichment of wheat root genes in jasmonic acid and γ-aminobutyric acid metabolic pathways, thus mitigating oxidative stress, enhancing stress resistance, and ensuring normal plant growth. This study, for the first time, provides comprehensive insights into the effects of polyurethane film residue on wheat seedling growth, underscoring its potential as a promising alternative to conventional plastics in soil.

Evaluating nitrogen dynamic and utilization under controlled-release fertilizer application for sunflowers in an arid region: Experimental and modeling approach

Traditional nitrogen fertilizers (TNF), such as urea, percolate easily in arid fields, posing low nitrogen use efficiency (NUE) and a high non-point pollution risk. Controlled-release fertilizers (CRF) exhibit significantly lower deep seepage, rendering it a favorable choice in arid fields due to its ability to enhance NUE through slow-release mechanisms. However, current models do not fully account for the soil nitrogen dynamics and crop interactions under controlled-release conditions, and lack quantification. This study improved the APSIM model by adjustment the urea hydrolysis rate to assess the impact of CRF and TNF applications on soil health, crop growth, and water quality. Calibration and validation were conducted through experiments in the Hetao Irrigation District of China from 2019 to 2020, with different nitrogen application rates (135, 225, and 315 kg/ha). The model accurately simulated soil NO3-N concentration (SNC), cumulative NO3-N leaching (CNL), nitrogen uptake (NU), and sunflower yield. During the validation process, R2 and Nash-Sutcliffe efficiency (NSE) values were both above 0.75. Results indicated that the average SNC, NU, and yield under CRF application were significantly higher than those under TNF application, with increases of 38.62%, 44.92%, and 18.38%, respectively. Notably, the proportion of soil nitrogen available (PSNA), a novel metric proposed in this study, was 159.50% higher in the 0-40 cm soil layer with CRF compared to TNF. Additionally, CNL and NO3-N leaching loss rate (NLLR) decreased by 25.76% and 25.77%, respectively. Scenario simulations indicated that the optimal fertilization strategy for this region is to use 180-193.5 kg/ha of CRF with a release period of 80-85.5 d to balance agricultural productivity and ecological protection. This study confirms the significant advantages of CRF in enhancing yield, improving nitrogen management, and promoting environmental sustainability, providing a scientific basis for CRF management strategies and supporting the shift towards more efficient and environmentally friendly agricultural practices.

Selective Synthesis of Organonitrogen Compounds via Electrochemical C-N Coupling on Atomically Dispersed Catalysts

The C-N coupling reaction demonstrates broad application in the fabrication of a wide range of high value-added organonitrogen molecules including fertilizers (e.g., urea), chemical feedstocks (e.g., amines, amides), and biomolecules (e.g., amino acids). The electrocatalytic C-N coupling pathways from waste resources like CO2, NO3-, or NO2- under mild conditions offer sustainable alternatives to the energy-intensive thermochemical processes. However, the complex multistep reaction routes and competing side reactions lead to significant challenges regarding low yield and poor selectivity toward large-scale practical production of target molecules. Among diverse catalyst systems that have been developed for electrochemical C-N coupling reactions, the atomically dispersed catalysts with well-defined active sites provide an ideal model platform for fundamental mechanism elucidation. More importantly, the intersite synergy between the active sites permits the enhanced reaction efficiency and selectivity toward target products. In this Review, we systematically assess the dominant reaction pathways of electrocatalytic C-N coupling reactions toward various products including urea, amines, amides, amino acids, and oximes. To guide the rational design of atomically dispersed catalysts, we identify four key stages in the overall reaction process and critically discuss the corresponding catalyst design principles, namely, retaining NOx/COx reactants on the catalyst surface, regulating the evolution pathway of N-/C- intermediates, promoting C-N coupling, and facilitating final hydrogenation steps. In addition, the advanced and effective theoretical simulation and characterization technologies are discussed. Finally, a series of remaining challenges and valuable future prospects are presented to advance rational catalyst design toward selective electrocatalytic synthesis of organonitrogen molecules.

Recent Advances in Superabsorbent Hydrogels Derived from Agro Waste Materials for Sustainable Agriculture: A Review

Superabsorbent hydrogels made from agro waste materials have the potential to promote sustainable agriculture and environmental sustainability. These hydrogels not only help reduce water consumption and increase crop yields but also contribute to minimizing waste and lowering greenhouse gas emissions. Recent research on superabsorbent hydrogels derived from agro wastes has focused on the preparation of hydrogels based on natural polymers isolated from agro wastes, such as cellulose, hemicellulose, and lignin. This review provides an in-depth examination of hydrogels developed from raw agro waste materials and natural polymers extracted from agro wastes, highlighting that these studies start with raw wastes as the main materials. The utilization strategies for specific types of agro wastes are comprehensively described. This review outlines different methods utilized in the production of these hydrogels, including physical cross-linking techniques such as dissolution-regeneration and freeze-thawing, as well as chemical cross-linking methods involving various cross-linking agents and graft polymerization techniques such as free radical polymerization, microwave-assisted polymerization, and γ radiation graft polymerization. Specifically, this review explores the applications of agro waste-based superabsorbent hydrogels in enhancing soil properties such as water retention and slow-release of fertilizers for sustainable agriculture.

Review of current trends in chitosan based controlled and slow-release fertilizer: From green chemistry to circular economy

The demand for food is increasing rapidly with the growth of the global population. To ensure global food security, fertilizers are essential. Controlled-release fertilizers (CRFs) are a highly effective type of fertilizer that have been developed to meet this need. While CRFs offer significant advantages over traditional fertilizers, their use has been limited due to high production costs and negative impact on the environment. CRFs are manufactured and applied without considering the resource-use efficiency of the production process or the potential ecological consequences of fertilizer application. To tackle these issues, biopolymer-based CRFs have been developed. These innovative fertilizers are created by coating granules with biodegradable and eco-friendly biopolymers (chitosan, starch and cellulose). In addition, these groundbreaking fertilizers align with the tenets of the circular economy, which involve formulating products that enable a gradual and steady dispensation of nutrients over an extended period. Our objective in embracing these fertilizers is to transcend the traditional linear "take, make, dispose" approach and transition towards a more sustainable and circular model. This approach not only enhances nutrient delivery efficiency but also contributes significantly to reducing the environmental impact associated with conventional fertilizer use. Afterward, the research explored various aspects of controlled-release fertilizers (CRFs), including the mechanisms of nutrient release, the types of coating materials used, and the techniques employed for coating. The study also examined the benefits and challenges associated with CRFs and analyzed how specific parameters influence the nutrient release mechanisms.

The Role of Superabsorbent Polymers and Polymer Composites in Water Resource Treatment and Management

In the last century, the issue of "water reserves" has become a remarkably strategic topic in modern science and technology. In this context, water resource treatment and management systems are being developed in both agricultural and urban area scenarios. This can be achieved using superabsorbent polymers (SAPs), highly cross-linked hydrogels with three-dimensional, hydrophilic polymer structures capable of absorbing, swelling and retaining huge amounts of aqueous solutions. SAPs are able to respond to several external stimuli, such as temperature, pH, electric field, and solution composition and concentration. They can be used in many areas, from sensor technology to drug delivery, agriculture, firefighting applications, food, and the biomedical industry. In addition, new categories of functional SAP-based materials, mainly superabsorbent polymer composites, can also encapsulate fertilizers to efficiently provide the controlled release of both water and active compounds. Moreover, SAPs have great potential in wastewater treatment for the removal of harmful elements. In this respect, in the following review, the most promising and recent advances in the use of SAPs and composite SAPs as tools for the sustainable management and remediation of water resource are reviewed and discussed by identifying opportunities and drawbacks and highlighting new challenges and aims to inspire the research community.

Recent progress in the development of encapsulated fertilizers for time-controlled release

This review describes the latest achievements in the development of encapsulated controlled-release fertilizers, which encompasses sustainability issues in agriculture. The research community's interest in this particular area of science has doubled over the last couple of years due to the yearly increasing complexity of the food and supply situation, as well as maintaining the development of modern society in the era of population outbreak. This review covers demand in timely systematization and comprehensive analysis of emerging research in so-called "smart fertilizers" that release mineral components in accordance with the needs for nutrients classified into controlled- and slow-release fertilizers (CRFs and SRFs). Along with the thoroughly selected fundamental studies published in this area, the review specially focuses on the materials-based classification, emphasizing the importance of the host matrix in the time-controlled release of dopant. This substantially differentiates our review and renders scientific novelty and relevancy to it. The review is divided into sections, dealing with the types of slow- and controlled-release fertilizers each, and supplemented with the critical view on their usage. All data regarding encapsulated fertilizers in this review are systematized for the convenience of the readership when becoming familiarized with the latest achievements in this area. Perspectives and potential pathways are also described to recommend and guide researchers working on the related academic fields.

Synthesis and characterization of chitosan-modified membrane for urea slow-release fertilizers

Background

Urea is a fertilizer widely used by farmers, especially vegetable farmers, due to its high nitrogen content, around 46 %. However, plants only use a small amount of nitrogen, a maximum of 35 %, while the remaining nitrogen is wasted and released into the environment. Undeniably, it causes increases production costs and environmental problems. A slow-release urea fertilizer (SRF) has been formulated to resolve these issues.

Methods

In this study, the membrane was made of chitosan with several crosslinking agents such as Tripolyphosphate (TPP). In addition, calcium ion bonds are expected to increase the interaction with urea fertilizer through the encapsulation process.

The results

Our data showed that urea slow-release fertilizer (SRF) with the chitosan/TPP/Ca membrane, was successfully synthesized. This membrane has the characteristics of a thin white layer that is transparent. The physical and chemical characterization of SRF membranes with various coating membrane variations showed that the chitosan/TPP/Ca-urea membrane has Young's modulus of 7.75-22.05 N/mm2, swelling of 109.52-132.62 % and porosity of 0.756-1.06 %. Functional group analysis shows that several spectral changes indicate the presence of crosslinking process between the chitosan functional groups and TPP. The urea release results show that the membrane is released through a diffusion mechanism. Furthermore, SEM results show that these membranes have pores with various shapes and sizes.

Conclusion

Based on the result, it can be concluded that chitosan membrane modification with the addition of TPP and calcium oxide provides improved membrane characteristic cs including degree of development, hydrophobicity, membrane stress, and nitrogen release on the membrane. This membrane shows is indicating suitability as a slow-release fertilizer.

Impact of fertilization depth on sunflower yield and nitrogen utilization: a perspective on soil nutrient and root system compatibility

Introduction

The depth of fertilizer application significantly influences soil nitrate concentration (SNC), sunflower root length density (RLD), sunflower nitrogen uptake (SNU), and yield. However, current studies cannot precisely capture subtle nutrient variations between soil layers and their complex relationships with root growth. They also struggle to assess the impact of different fertilizer application depths on sunflower root development and distribution as well as their response to the spatial and temporal distribution of nutrients.

Methods

The Agricultural Production Systems sIMulator (APSIM) model was employed to explore the spatial and temporal patterns of nitrogen distribution in the soil at three controlled-release fertilizer (CRF) placement depths: 5, 15, and 25 cm. This study investigated the characteristics of the root system regarding nitrogen absorption and utilization and analyzed their correlation with sunflower yield formation. Furthermore, this study introduced the modified Jaccard index (considering the compatibility between soil nitrate and root length density) to analyze soil-root interactions, providing a deeper insight into how changes in CRF placement depth affect crop growth and nitrogen uptake efficiency.

Results

The results indicated that a fertilization depth of 15 cm improved the modified Jaccard index by 6.60% and 7.34% compared to 5 cm and 25 cm depths, respectively, maximizing sunflower yield (an increase of 9.44%) and nitrogen absorption rate (an increase of 5.40%). This depth promoted a greater Root Length Density (RLD), with an increases of 11.95% and 16.42% compared those at 5 cm and 25 cm, respectively, enhancing deeper root growth and improving nitrogen uptake. In contrast, shallow fertilization led to higher nitrate concentrations in the topsoil, whereas deeper fertilization increased the nitrate concentrations in the deeper soil layers.

Discussion

These results provide valuable insights for precision agriculture and sustainable soil management, highlighting the importance of optimizing root nitrogen absorption through tailored fertilization strategies to enhance crop production efficiency and minimize environmental impact.

Replacing nitrogen in mineral fertilizers with nitrogen in maize straw increases soil water-holding capacity

Soil water-holding capacity decreases due to long-term mineral fertilizer application. The objective of this study was to determine how replacing mineral fertilizer with maize straw affected the soil water retention curve, soil water content, soil water availability, and soil equivalent pore size. Replacement treatments in which 25% (S25), 50% (S50), 75% (S75), and 100% (S100) of 225 kg ha-1 nitrogen from mineral fertilizer (CK) was replaced with equivalent nitrogen from maize straw were conducted for five years in the Loess Plateau of China. The Gardner model was used to fit the soil water retention curve and calculate the soil water constant and equivalent pore size distribution. The results indicated that the Gardner model fitted well. Replacing nitrogen from mineral fertilizer with nitrogen from straw increased soil specific water capacity, soil readily available water, soil delayed available water, soil available water, soil capillary porosity, and soil available water porosity over time. S25 increased field capacity and wilting point from the fourth fertilization year. S50 enhanced soil readily available water, soil delayed available water, soil available water, and soil available water porosity from the fifth fertilization year, whereas S25 and S75 increased these from the third fertilization year or earlier. Soil specific water capacity, soil readily available water, soil delayed available water, soil available water, soil capillary porosity, and soil available water porosity could better reflect soil water-holding capacity and soil water supply capacity compared with field capacity and wilting point.

Preparation and Application of Degradable Lignin/Poly (Vinyl Alcohol) Polymers as Urea Slow-Release Coating Materials

The massive amount of water-soluble urea used leads to nutrient loss and environmental pollution in both water and soil. The aim of this study was to develop a novel lignin-based slow-release envelope material that has essential nitrogen and sulfur elements for plants. After the amination reaction with a hydrolysate of yak hair keratin, the coating formulation was obtained by adding different loadings (2, 5, 8, 14 wt%) of aminated lignin (AL) to 5% polyvinyl alcohol (PVA) solution. These formulations were cast into films and characterized for their structure, thermal stability, and mechanical and physicochemical properties. The results showed that the PVA-AL (8%) formulation had good physical and chemical properties in terms of water absorption and mechanical properties, and it showed good degradation in soil with 51% weight loss after 45 days. It is suitable for use as a coating material for fertilizers. Through high-pressure spraying technology, enveloped urea particles with a PVA-AL (8%) solution were obtained, which showed good morphology and slow-release performance. Compared with urea, the highest urea release was only 96.4% after 30 days, conforming to Higuchi model, Ritger-Peppas model, and second-order dynamic model. The continuous nitrogen supply of PVA-AL coated urea to Brassica napus was verified by potting experiments. Therefore, the lignin-based composite can be used as a coating material to produce a new slow-release nitrogen fertilizer for sustainable crop production.

Effects of straw returning combined with blended controlled-release urea fertilizer on crop yields, greenhouse gas emissions, and net ecosystem economic benefits: A nine-year field trial

Although straw returning combined with blended controlled-release urea fertilizer (BUFS) has been shown to improve wheat-maize rotation system productivity, their effects on greenhouse gas (GHG) emissions, carbon footprints (CF), and net ecosystem economic benefits (NEEB) are still unknown. Life cycle assessment was used to investigate a long-term (2013-2022) wheat-maize rotation experiment that included straw combined with two N fertilizer types [BUFS and (conventional urea fertilizer) CUFS] and straw-free treatments (BUF and CUF). The results showed that BUFS and CUFS treatments increased the annual yield by 13.8% and 11.5%, respectively, compared to BUF and CUF treatments. The BUFS treatment increased the yearly yield by 13.8% compared to the CUFS treatment. Since BUFS and CUFS treatments increased soil organic carbon (SOC) sink sequestration by 25.0% and 27.0% compared to BUF and CUF treatments, they reduced annual GHG emissions by 7.1% and 4.7% and CF per unit of yield (CFY) by 13.7% and 9.6%, respectively. BUFS treatment also increased SOC sink sequestration by 20.3%, reduced GHG emissions by 10.7% and CFY by 23.0% compared to CUFS treatment. It is worth noting that the BUFS and CUFS treatments increased the annual ecological costs by 41.6%, 26.9%, and health costs by 70.1% and 46.7% compared to the BUF and CUF treatments, but also increased the net yield benefits by 9.8%, 6.8%, and the soil nutrient cycling values by 29.2%, 27.3%, and finally improved the NEEB by 10.1%, 7.3%, respectively. Similar results were obtained for the BUFS treatment compared to the CUFS treatment, ultimately improving the NEEB by 23.1%. Based on assessing yield, GHG emissions, CF, and NEEB indicators, the BUFS treatment is recommended as an ideal agricultural fertilization model to promote sustainable and clean production in the wheat-maize rotation system and to protect the agroecological environment.

All-Natural Plant-Derived Polyurethane as a Substitute of a Petroleum-Based Polymer Coating Material

The development of efficient, biobased polyurethane controlled-release fertilizers from sustainable and eco-friendly biomaterials has received increased research attention, owing to concerns regarding global food security and environmental sustainability. Most previous studies focused on replacing petroleum-based polyols with biopolyols; however, the other main raw material, isocyanate, remained a petrochemical product. Herein, all-natural, plant-derived polyurethane-coated urea was successfully developed using castor oil and biobased isocyanate, and the performance of the coating shell before and after modification was compared. The results showed that the incorporation of a low dose of lauric acid copper into the coating material simultaneously enhanced the hydrophobicity and elasticity of the all-biobased polyurethane membrane, which prolonged the nitrogen release longevity from 3 to 112 days. In addition, the modified membrane showed excellent biodegradability in a soil environment. The novel all-biobased polyurethane coating material and modification technique provide insight for developing sustainable and eco-friendly controlled-release fertilizers.

Yield, Quality, and Nitrogen Leaching of Open-Field Tomato in Response to Different Nitrogen Application Measures in Northwestern China

The overuse of fertilizers in open-field tomato leads to soil deterioration through nutrient leaching and increases the risk of agricultural non-point source contamination. Currently, the combined effects of different fertilization methods on soil nitrogen leaching and tomato production are still unclear. Therefore, the most effective fertilization method for open-field tomato should be discovered by examining how different fertilization methods affected tomato yield and quality, nitrogen use efficiency (NUE), and soil nitrogen leaching. Compared with CK (no fertilization), fertilization significantly increased the yield, total sugar (TS), total soluble solids (TSS), and vitamin C (vC) contents of fruits (p < 0.05), and OPT (optimal fertilization, controlled release nitrogen application, 240 kg ha-1) had the largest effect on increasing yield, quality, and net profit. However, when the fertilizer application rate reached 375 kg ha-1, these indices decreased. Nitrogen leaching concentrations, leaching amount, and titratable acids (TAs) increased with increased nitrogen application rates. Compared with other treatments, OPT reduced the total leaching amounts of total nitrogen (TN), nitrate nitrogen (NO3--N), and ammonia nitrogen (NH4+-N) by 30.09-51.79%, 24.89-50.03%, and 30-65%, respectively. Principal component analysis (PCA) showed that OPT achieved the highest overall score in terms of yield, quality, and nitrogen leaching conditions. The partial least squares path modeling (PLS-PM) further reveals that applications of high amounts of nitorigen have a positive effect on soil nitrogen leaching. The amount of nitrogen leaching vegetatively affects tomato yield and quality, while plant uptake of nitrogen positively affects tomato production. These findings confirm the importance of using controlled-release fertilizers and reducing nitrogen inputs to control nitrogen leaching and enhance open-field tomato yields.

Effects of depth of straw returning on maize yield potential and greenhouse gas emissions

Appropriate straw incorporation has ample agronomic and environmental benefits, but most studies are limited to straw mulching or application on the soil surface. To determine the effect of depth of straw incorporation on the crop yield, soil organic carbon (SOC), total nitrogen (TN) and greenhouse gas emission, a total of 4 treatments were set up in this study, which comprised no straw returning (CK), straw returning at 15 cm (S15), straw returning at 25 cm (S25) and straw returning at 40 cm (S40). The results showed that straw incorporation significantly increased SOC, TN and C:N ratio. Compared with CK treatments, substantial increases in the grain yield (by 4.17~5.49% for S15 and 6.64~10.06% for S25) were observed under S15 and S25 treatments. S15 and S25 could significantly improve the carbon and nitrogen status of the 0-40 cm soil layer, thereby increased maize yield. The results showed that the maize yield was closely related to the soil carbon and nitrogen index of the 0-40 cm soil layer. In order to further evaluate the environmental benefits of straw returning, this study measured the global warming potential (GWP) and greenhouse gas emission intensity (GHGI). Compared with CK treatments, the GWP of S15, S25 and S40 treatments was increased by 9.35~20.37%, 4.27~7.67% and 0.72~6.14%, respectively, among which the S15 treatment contributed the most to the GWP of farmland. GHGI is an evaluation index of low-carbon agriculture at this stage, which takes into account both crop yield and global warming potential. In this study, GHGI showed a different trend from GWP. Compared with CK treatments, the S25 treatments had no significant difference in 2020, and decreased significantly in 2021 and 2022. This is due to the combined effect of maize yield and cumulative greenhouse gas emissions, indicating that the appropriate straw returning method can not only reduce the intensity of greenhouse gas emissions but also improve soil productivity and enhance the carbon sequestration effect of farmland soil, which is an ideal soil improvement and fertilization measure.

A facile strategy to fabricate lignocellulose-based slow-release fertilizers via a high-performance treatment of rice straw using deep eutectic solvents

Lignin-based slow-release fertilizers (SRFs) have attracted widespread attention due to their ability to enhance nutrient utilization efficiency and reduce environmental pollution in agricultural production. However, the extraction and separation processes of lignin from biomass sources are intricate, involving substantial quantities of non-reusable toxic reagents. Here, a sustainable and eco-friendly approach using deep eutectic solvents (DES) was employed to treat rice straw, effectively dissolving the lignin present. Subsequently, the in-situ lignin regeneration was facilitated through the addition of a zinc chloride solution. The regenerated lignin was tightly wrapped around and connected to cellulose micro/nanofibers, forming a homogeneous slurry. A simple coating technique was employed to uniformly coat urea particles with the lignocellulosic slurry, yielding lignocellulose-based SRFs. Results revealed that the nutrient release of the lignocellulose-based coated fertilizers in water exceeded 56 days. A pot trial demonstrated that the application of lignocellulose-based SRFs significantly promoted the growth of rice and improved grain yield (by 10.7 %) and nitrogen use efficiency (by 34.4 %) compared to the urea treatment in rice production. Furthermore, the DES demonstrated consistently high efficiency in biomass processing even after four cycles of reuse. This green strategy offers a novel approach for the preparation of SRFs coating materials, promoting agricultural sustainability.

Bioelectrochemically triggered apoferritin-based bionanoreactors: synthesis of CdSe nanoparticles and monitoring with leaky waveguides

Herein, we describe a novel method for producing cadmium-selenide nanoparticles (CdSe NPs) with controlled size using apoferritin as a bionanoreactor triggered by local pH change at the electrode/solution interface. Apoferritin is known for its reversible self-assembly at alkaline pH. The pH change is induced electrochemically by reducing O2 through the application of sufficiently negative voltages and bioelectrochemically through O2 reduction catalyzed by laccase, co-immobilized with apoferritin on the electrode surface. Specifically, a Ti electrode is modified with (3-aminopropyl)triethoxysilane, followed by glutaraldehyde cross-linking (1.5% v/v in H2O) of apoferritin (as the bionanoreactor) and laccase (as the local pH change triggering system). This proposed platform offers a universal approach for controlling the synthesis of semiconductor NPs within a bionanoreactor solely driven by (bio)electrochemical inputs. The CdSe NPs obtained through different synthetic approaches, namely electrochemical and bioelectrochemical, were characterized spectroscopically (UV-Vis, Raman, XRD) and morphologically (TEM). Finally, we conducted online monitoring of CdSe NPs formation within the apoferritin core by integrating the electrochemical system with LWs. The quantity of CdSe NPs produced through bioelectrochemical means was determined to be 2.08 ± 0.12 mg after 90 minutes of voltage application in the presence of O2. TEM measurements revealed that the bioelectrochemically synthesized CdSe NPs have a diameter of 4 ± 1 nm, accounting for 85% of the size distribution, a result corroborated by XRD data. Further research is needed to explore the synthesis of nanoparticles using different biological nanoreactors, as the process can be challenging due to the elevated buffer capacitance of biological media.

Development and testing of environment friendly nanohybrid coatings for sustainable agriculture technologies

Less than 50% of the applied urea fertilizer is taken up by plants due to poor nitrogen (N) use efficiency which affects overall agricultural productivity and leads to serious environmental and economic problems. Additionally, soils with high salinity might limit zinc (Zn) availability. Low Zn use efficiency (<30%) when applied as synthetic salts, e.g., zinc sulfate has therefore minimized their applicability. Within the past two decades, nanotechnology has gained a lot of interest in the development of effective nano fertilizers with high nutrient use efficiency (NUE). In this perspective, the approach of coating conventional fertilizers with nano materials especially, the ones which are essential nutrients has researched because of their high use efficiency and reduced losses. In this work, a novel and innovative formulation of hybrid nano fertilizer has been prepared for the sustainable release of nutrients. Zinc oxide nanoparticles (ZnO-NPs <50 nm) were incorporated into the biodegradable polymer (gelatin) and coated on urea using a fluidized bed coater. Among all the formulations, GZnSNPs (1.5% gelatin+0.5% elemental Zn as ZnO-NPs) showed a significant delay in urea release (<80 %) after 120 min). The sand column experiment showed sustainable Zn release for GZnSNPs i.e., 2.7 ppm vs. 3.5 ppm (GZnS) after the 6th day. Moreover, a substantial increase in wheat grain yield (6500 kg/ha), N uptake (46.5 kg/ha) and Zn uptake (21.64 g/ha) were observed for fields amended with GZnSNPs. The composition of GZnSNPs was valuable since this attracted the highest return relative to the other treatments. Gelatin supplied small N-containing molecules, resulting in extra value addition with ZnO-NPs thus increasing yield and fertilizer properties more relative to the same amount of elemental Zn given via bulk salt. Therefore, the findings of the current study recommend the use of ZnO-NPs in the agricultural sector without any negative effects on yield and NUE.

Improved Soil Amendment by Integrating Metal Complexes and Biodegradable Complexing Agents in Superabsorbents

The superabsorbents' application as materials for the preparation of modern mineral fertilizers of controlled activity is presented. Under the static conditions, the commercial acrylic-based Agro® Hydrogel was used as a sorbent for Cu(II), Fe(III), Mn(II), and Zn(II) ions in the presence of three biodegradable complexing agents of the new generation: (N-1,2-dicarboxyethyl)-D,L-aspartate acid (IDHA), N,N-ethylenediaminedisuccinic acid (EDDS) and N,N-bis(carboxymethyl) glutamic acid (GLDA). The ions and complexes concentrations were determined by the inductively coupled plasma optical emission spectrometer (ICP-OES). The characterization of hydrogel before and after the adsorption process was made using the Fourier transform infrared spectroscopy (FT-IR), surface area determination (ASAP), scanning electron microscopy (SEM-EDS) as well as the thermogravimetric (TGA) methods. The influence of the phase contact time, initial concentration, and pH on the adsorption capacities was investigated. The kinetic and adsorption parameters were determined. The Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin adsorption models were applied to describe the experimental data. The Langmuir isotherm model accurately characterized the equilibrium process. The adsorption process was fast, and it reached equilibrium after 60 min of the phase contact time. The research on the adsorption of Cu(II), Fe(III), Mn(II), and Zn(II) onto Agro® Hydrogel with IDHA, EDDS, and GLDA indicates that these complexing agents improve process efficiency.

Sustainable SMART fertilizers in agriculture systems: A review on fundamentals to in-field applications

Agriculture will face the issue of ensuring food security for a growing global population without compromising environmental security as demand for the world's food systems increases in the next decades. To provide enough food and reduce the harmful effects of chemical fertilization and improper disposal or reusing of agricultural wastes on the environment, will be required to apply current technologies in agroecosystems. Combining biotechnology and nanotechnology has the potential to transform agricultural practices and offer answers to both immediate and long-term issues. This review study seeks to identify, categorize, and characterize the so-called smart fertilizers as the future frontier of sustainable agriculture. The conventional fertilizer and smart fertilizers in general are covered in the first section of this review. Another key barrier preventing the widespread use of smart fertilizers in agriculture is the high cost of materials. Nevertheless, smart fertilizers are widely represented on the world market and are actively used in farms that have already switched to sustainable technologies. The advantages and disadvantages of various raw materials used to create smart fertilizers, with a focus on inorganic and organic materials, synthetic and natural polymers, along with their physical and chemical preparation processes, are contrasted in the following sections. The rate and the mechanism of release are covered. The purpose of this study is to provide a deep understanding of the advancements in smart fertilizers during the last ten years. Trends are also recognized and studied to provide insight for upcoming agricultural research projects.

A comprehensive review on starch: Structure, modification, and applications in slow/controlled-release fertilizers in agriculture

This comprehensive review thoroughly examines starch's structure, modifications, and applications in slow/controlled-release fertilizers (SRFs) for agricultural purposes. The review begins by exploring starch's unique structure and properties, providing insights into its molecular arrangement and physicochemical characteristics. Various methods of modifying starch, including physical, chemical, and enzymatic techniques, are discussed, highlighting their ability to impart desirable properties such as controlled release and improved stability. The review then focuses on the applications of starch in the development of SRFs. It emphasizes the role of starch-based hydrogels as effective nutrient carriers, enabling their sustained release to plants over extended periods. Additionally, incorporating starch-based hydrogel nano-composites are explored, highlighting their potential in optimizing nutrient release profiles and promoting plant growth. Furthermore, the review highlights the benefits of starch-based fertilizers in enhancing plant growth and crop yield while minimizing nutrient losses. It presents case studies and field trials demonstrating starch-based formulations' efficacy in promoting sustainable agricultural practices. Overall, this review consolidates current knowledge on starch, its modifications, and its applications in SRFs, providing valuable insights into the potential of starch-based formulations to improve nutrient management, boost crop productivity, and support sustainable agriculture.

Recommended Values for the Hydrophobicity and Mechanical Properties of Coating Materials Usable for Preparing Controlled-Release Fertilizers

The hydrophobicity and mechanical properties of coating materials and the nitrogen (N) release rates of 11 kinds of controlled-release fertilizers (CRFs) were determined in this study. The results show that the N release periods of the CRFs had negative correlations with the water absorption (WA) of the coating materials (y = 166.06x-1.24, r = 0.986), while they were positively correlated with the water contact angle (WCA) and elongation at break (EB) (y = 37.28x0.18, r = 0.701; y = -19.42 + 2.57x, r = 0.737). According to the fitted functional equation, CRFs that could fulfil the N release period of 30 days had a coating material WA < 2.4%, WCA > 68.8°, and EB > 57.7%. The recommended values for a CRF that can fulfil the N release period of 30 days are WA < 3.0%, WCA > 60.0°, and EB > 30.0% in the coating materials. CRFs with different nutrient release periods can be designed according to the recommended values to meet the needs of different crops. Furthermore, our experiments have illustrated that the N release period target of 30 days can be reached for modified sulfur-coated fertilizers (MSCFs) by improving their mechanical properties.

Ammonia volatization from conventional and stabilized fertilizers, agronomic aspects and microbiological attributes in a Brazilian coffee crop system

We aimed to quantify the N losses through volatilization of the main conventional and stabilized N fertilizers applied in coffee plantations. Additionally, we also assessed microbiological attributes of the soil (microbial biomass carbon (MBC); microbial biomass nitrogen (MBN); microbial basal respiration (MBR); metabolic quotient (qCO2); urease, β-glucosidase, acid phosphatase, and arylsulfatase activities) and agronomic aspects of the crop (N content in the leaves and beans, yield, and N exportation by the beans). Treatments consisted of the combination of three fertilizers (ammonium nitrate - AN, conventional urea - U, and urea with N- (n-butyl) thiophosphoric triamide (NBPT) - UNBPT, and five doses of N (0, 150, 275, 400, and 525 kg ha-1 year-1 of N), with four replicates, totalling 60 experimental plots. In the two crop seasons evaluated, daily and cumulative losses of N-NH3 from the split fertilizer applications were influenced by the N fertilizer technologies. The application of U resulted in losses of 22.0% and 22.8% for the doses of 150 and 400 kg ha-1 year-1 of N. This means that 66 and 182 kg ha-1 of N-NH3 were lost, respectively, at the end of six fertilizations with U. UNBPT reduced urease activity and N-NH3 losses compared to conventional urea, avoiding the volatilization of 15.9 and 24.3 kg ha-1 of N. As for AN, N-NH3 losses did not exceed 1% of the applied dose, regardless of the weather conditions during the fertilization. Urease activity was higher on days of maximum NH3 volatilization. There was an effect of the N sources (NS), soil sampling time (ST), and their interaction (NS × ST) on the MBN and arylsulfatase activity. The N sources also influenced the MBC and the qCO2. A substantial amount of N was removed from the system by the beans and husks of the harvested fruits. Our study showed that N fertilizer technologies are interesting options to reduce N-NH3 losses by volatilization, increase N retention in the soil, and improve microbiological attributes and the sustainability of coffee production systems.

The application of chitosan as a carrier for fertilizer: A review

The smart combination of agriculture and other sciences can greatly reduce the limits of fertilizer use. Chitosan is a linear amino polysaccharide with a rigid structure which has hydrophilic and crystal properties. The formation of intermolecular hydrogen bonds the presence of reactive groups and cross-linking, the formation of salts with organic and inorganic acids with complexing and chelating properties ionic conductivity, film formation are the characteristics of chitosan. With the presence of amino groups, chitosan can form a complex with other compounds and also enter the vascular system of plants and lead to the activation of metabolic-physiological pathways of plants. This polymeric compound can bond with other natural polymers and in combination with fertilizers and nutritional elements, on the one hand, it can provide the nutritional needs of the plant and on the other hand, it also helps to improve the soil texture. Chitosan nanomaterials as a Next-generation fertilizers act as plant immune system enhancers through slow, controlled, and targeted delivery of nutrients to plants. Chitosan can assist agricultural researchers and has become an ideal and effective option with its many applications in various fields.

Hydrothermal carbonization of biogas slurry and cattle manure into soil conditioner mitigates ammonia volatilization from paddy soil

Hydrothermal carbonization of biogas slurry and animal manure into hydrochar could enhance waste recycling waste and minimize ammonia (NH3) volatilization from paddy fields. In this study, cattle manure-derived hydrochar prepared in the presence of Milli-Q water (CMWH) and biogas slurry (CMBSH), and biogas slurry-based hydrochar embedded with zeolite (ZHC) were applied to rice-paddy soil. The results demonstrated that CMBSH and ZHC treatments could significantly mitigate the cumulative NH3 volatilization and yield-scale NH3 volatilization by 27.9-45.2% and 28.5-45.4%, respectively, compared to the control group (without hydrochar addition), and significantly correlated with pH and ammonium-nitrogen (NH4+-N) concentration in floodwater. Nitrogen (N) loss via NH3 volatilization in the control group accounted for 24.9% of the applied N fertilizer, whereas CMBSH- and ZHC-amended treatments accounted for 13.6-17.9% of N in applied fertilizer. The reduced N loss improved soil N retention and availability for rice; consequently, grain N content significantly increased by 6.5-14.9% and N-use efficiency increased by 6.4-16.0% (P < 0.05), respectively. Based on linear fitting results, NH3 volatilization mitigation resulted from lower pH and NH4+-N concentration in floodwater that resulted from the acidic property and specific surface area of hydrochar treatments. Moreover, NH3-oxidizing archaea abundance in hydrochar-treated soil decreased by 40.9-46.9% in response to CMBSH and ZHC treatments, potentially suppressing NH4+-N transformation into nitrate and improving soil NH4+-N retention capacity. To date, this study applied biogas slurry-based hydrochar into paddy soil for the first time and demonstrated that ZHC significantly mitigated NH3 and increased N content. Overall, this study proposes an environmental-friendly strategy to recycle the wastes, biogas slurry, to the paddy fields to mitigate NH3 volatilization and increase grain yield of rice.

Effect of a Prolonged-Release System of Urea on Nitrogen Losses and Microbial Population Changes in Two Types of Agricultural Soil

Urea is the nitrogen-containing fertilizer most used in agricultural fields; however, the nutrient given by the urea is lost into the environment. The aim of this research was to determine the effect of two soil textures by applying a prolonged-release system of urea (PRSU) on the N losses. This research shows an important decrease of the nitrate and ammonium losses from 24.91 to 87.94%. Also, the microbiological population increases after the application of the PRSU. It was concluded that both soil textures presented the same loss-reduction pattern, where the N from the nitrates and ammonium was reduced in the leachates, increasing the quality of the soil and the microbial population in both soil textures after the PRSU application.

New Straw Coating Material for Improving the Slow-Release Performance of Fertilizers

In this work, we extracted cellulose from agricultural waste and produced a new straw coating material (ethyl cellulose, EC) through a series of modification operations. The slow-release properties of ethyl cellulose-coated urea (EU) and its absorption and utilization by plants were evaluated. The surface of EU can form a smooth and fine film, and the initial nutrient release rate is only 37.91% that of the uncoated fertilizer. Compared with common urea, the nitrogen of plants cultivated with EU increased by 17.69%, and the leached nitrogen decreased by 61.29%, indicating that EU can reduce nitrogen waste to the greatest extent and continuously supply nutrients to crops. Therefore, the application of EU could be a more practical, environmentally friendly, and sustainable alternative to nitrogen fertilizers.

Insights into the Potential of Biopolymeric Aerogels as an Advanced Soil-Fertilizer Delivery Systems

Soil fertilizers have the potential to significantly increase crop yields and improve plant health by providing essential nutrients to the soil. The use of fertilizers can also help to improve soil structure and fertility, leading to more resilient and sustainable agricultural systems. However, overuse or improper use of fertilizers can lead to soil degradation, which can reduce soil fertility, decrease crop yields, and damage ecosystems. Thus, several attempts have been made to overcome the issues related to the drawbacks of fertilizers, including the development of an advanced fertilizer delivery system. Biopolymer aerogels show promise as an innovative solution to improve the efficiency and effectiveness of soil-fertilizer delivery systems. Further research and development in this area could lead to the widespread adoption of biopolymer aerogels in agriculture, promoting sustainable farming practices and helping to address global food-security challenges. This review discusses for the first time the potential of biopolymer-based aerogels in soil-fertilizer delivery, going through the types of soil fertilizer and the advert health and environmental effects of overuse or misuse of soil fertilizers. Different types of biopolymer-based aerogels were discussed in terms of their potential in fertilizer delivery and, finally, the review addresses the challenges and future directions of biopolymer aerogels in soil-fertilizer delivery.

Structure and Properties of the Xerogels Based on Potassium Silicate Liquid Glass and Urea

The xerogels based on the aqueous solutions of urea in potassium silicate liquid glass (PSLG) were produced by CO₂ bubbling and investigated. The structure and chemical composition of the obtained materials were analyzed. Using the SEM, XRD, IR-FT, DSC, and low energy local EDS analysis, it was recognized that the dried gels (xerogels) contained three forms of urea: oval crystals of regular shape appeared onto the surface of xerogel particles; fibrous crystals were located in the silicate matrix; and molecules/ions were incorporated into the silicate matrix. It was shown that an increase in [(NH₂)₂CO] in the gel-forming system promoted increased contents in crystalline forms of urea as well as the diameter of the fiber-shaped urea crystals. A rate of the urea release in water from the granulated xerogels containing 5.8, 12.6, and 17.9 wt.% of urea was determined by the photometric method. It was determined that the obtained urea-containing xerogels were characterized with a slow release of urea, which continued up to 120 days, and could be used as controlled release fertilizers containing useful nutrients (N, K).

Improvement of tomato yield and quality using slow release NPK fertilizers prepared by carnauba wax emulsion, starch-based latex and hydrogel nanocomposite combination

The modern agriculture is working on introducing new generation of fertilizers that apt to slow down the nutrients release to be more in synchrony with plant's need throughout growth season, enhance fertilizer performance, and decrease nutrient losses into the environment. The aim of this research was to develop an advanced NPK slow-release fertilizer (SRF) and investigate its effect on yield, nutritional and morphological responses of tomato plant (Lycopersicon esculentum Mill.) as a model crop. To this goal, three water-based bio-polymeric formulations including starch-g-poly (acrylic acid-co-acrylamide) nanocomposite hydrogel, starch-g-poly(styrene-co-butylacrylate) latex, and carnauba wax emulsion were synthesized and used for production of NPK-SRF samples. Different samples of coated fertilizers (urea, potassium sulfate, and superphosphate granules) were prepared using different ratios of latex and wax emulsion, and for phosphorus and potash (R-treatment). Moreover, some of coated fertilizers (15 and 30 wt.%) was replaced with nanocomposite hydrogel containing fertilizers, named D and H treatments, respectively. The effect of SRF samples were compared with commercial fertilizers (NPK treatment) and a commercial SRF (T treatment), on the growth of tomato in the greenhouse, at two different levels (100 and 60). The efficiency of all the synthesized formulations were higher than NPK and T treatments, and among them, H100 significantly improved the morphological and physiological characteristics of tomato. For instance, amount of residual elements (nitrogen, phosphorus and potassium) as well as micro elements of calcium, iron and zinc in tomato cultivation bed and accordingly the uptake of these elements in the roots, aerial parts and fruits were increased in the R, H, and D treatments. The highest yield (1671.54 g), highest agricultural agronomy efficiency of fertilizer, and the highest dry matter percentage (9.52%) were obtained in H100. The highest amount of lycopene, antioxidant capacity and vitamin C was also observed in H100. Nitrate accumulation in tomato fruit in the synthesized SRF samples were decreased significantly compared to NPK100, and the lowest amount was observed in H100, which was 55.24% less than NPK100. Accordingly, it is suggested that combination of natural-based nanocomposite hydrogels along with coating latexes and wax emulsions can be a successful method to synthesize efficient NPK-SRF formulations for improvement of crop growth and quality.

Unraveling mechanisms behind reduced nitrate leaching with graphite nanomaterials addition with fertilizers in soil column experiments

Overuse or mistimed application of nitrogen fertilizer can cause nitrate contamination in groundwater and surrounding surface waters. Previous greenhouse studies have explored the use of graphene nanomaterials, including graphite nano additive (GNA), to reduce nitrate leaching in an agricultural soil while growing lettuce crops. To investigate the mechanism of GNA addition in suppressing nitrate leaching, we conducted soil column experiments using native agricultural soils under saturated or unsaturated flow conditions to simulate varied irrigation. We investigated the effects of temperature (4 °C compared with 20 °C) on microbial activity and dose effect of GNA was also explored (165 mg/kg soil and 1650 mg/kg soil) for biotic soil column experiments whereas a single temperature condition (20 °C) and GNA dose (165 mg/kg soil) was employed for abiotic (autoclaved) soil column experiments. Results showed GNA addition had minimal effects on nitrate leaching in saturated flow soil columns due to short hydraulic residence times (∼3.5 h). In comparison, longer residence times (∼3 d) in unsaturated soil columns reduced nitrate leaching by 25-31% relative to control soil columns without GNA addition. Furthermore, nitrate retention in the soil column was found to be suppressed at 4 °C compared with 20 °C, suggesting a bio-mediated mechanism for GNA addition to reduce nitrate leaching. In addition, the soil dissolved organic matter was found to be associated with nitrate leaching, where less nitrate leaching occurring when higher dissolved organic carbon (DOC) was measured in leachate water. Following studies of adding soil-derived organic carbon (SOC) resulted in greater nitrogen retention in the unsaturated soil columns only when GNA was present. Overall, the results suggest that GNA-amended soil reduces nitrate loss through increased N immobilization in the microbial biomass or loss of N in gaseous phase through enhanced nitrification and denitrification process.

Modification of Fabrication Process for Prolonged Nitrogen Release of Lignin-Montmorillonite Biocomposite Encapsulated Urea

Crop production faces challenges in achieving high fertilizer use efficiency. To address this issue, slow-release fertilizers (SRFs) have emerged as effective solutions to minimize nutrient losses caused by leaching, runoff, and volatilization. In addition, replacing petroleum-based synthetic polymers with biopolymers for SRFs offers substantial benefits in terms of sustainability of crop production and soil quality preservation, as biopolymers are biodegradable and environmentally friendly. This study focuses on modifying a fabrication process to develop a bio-composite comprising biowaste lignin and low-cost montmorillonite clay mineral for encapsulating urea to create a controllable release fertilizer (CRU) with a prolonged nitrogen release function. CRUs containing high N contents of 20 to 30 wt.% were successfully and extensively characterized using X-Ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Scanning Electron Microscopy (SEM). The results showed that the releases of N from CRUs in water and soil extended to considerably long periods of 20 and 32 days, respectively. The significance of this research is the production of CRU beads that contain high N percentages and have a high soil residence period. These beads can enhance plant nitrogen utilization efficiency, reduce fertilizer consumption, and ultimately contribute to agricultural production.

Recent Development of Versatile Polyphenol Platforms in Fertilizers and Pesticides

The utilization of agrochemicals has been of significant importance in both the cultivation and disease control of crops. The development of advanced agrochemicals that are both effective and eco-friendly has been made possible through the use of slow delivery platforms and surface modification technology. Inspired by the nature of mussel adhesion, polyphenolic platforms with versatile properties have been extensively employed in various applications, including agro-food, owing to their ability to flexibly modulate chemical and surface characteristics. This mini-review highlights the development of polyphenols, such as polydopamine and tannic acid, in the field of agrochemicals, particularly in the design and production of novel fertilizers and pesticides. The synthetic approach, active ingredient release performance, foliar adhesion, and design of polyphenolic-based agrochemicals in recent years have been discussed to explore their potential applications and limitations. We believe that utilizing versatile polyphenolic materials and their characteristics for agro-food applications can provide innovative ideas and suggestions for developing novel agrochemicals suitable for modern and sustainable horticulture and agriculture.

Nanofertilizers: Types, Delivery and Advantages in Agricultural Sustainability

In an alarming tale of agricultural excess, the relentless overuse of chemical fertilizers in modern farming methods have wreaked havoc on the once-fertile soil, mercilessly depleting its vital nutrients while inflicting irreparable harm on the delicate balance of the surrounding ecosystem. The excessive use of such fertilizers leaves residue on agricultural products, pollutes the environment, upsets agrarian ecosystems, and lowers soil quality. Furthermore, a significant proportion of the nutrient content, including nitrogen, phosphorus, and potassium, is lost from the soil (50–70%) before being utilized. Nanofertilizers, on the other hand, use nanoparticles to control the release of nutrients, making them more efficient and cost-effective than traditional fertilizers. Nanofertilizers comprise one or more plant nutrients within nanoparticles where at least 50% of the particles are smaller than 100 nanometers. Carbon nanotubes, graphene, and quantum dots are some examples of the types of nanomaterials used in the production of nanofertilizers. Nanofertilizers are a new generation of fertilizers that utilize advanced nanotechnology to provide an efficient and sustainable method of fertilizing crops. They are designed to deliver plant nutrients in a controlled manner, ensuring that the nutrients are gradually released over an extended period, thus providing a steady supply of essential elements to the plants. The controlled-release system is more efficient than traditional fertilizers, as it reduces the need for frequent application and the amount of fertilizer. These nanomaterials have a high surface area-to-volume ratio, making them ideal for holding and releasing nutrients. Naturally occurring nanoparticles are found in various sources, including volcanic ash, ocean, and biological matter such as viruses and dust. However, regarding large-scale production, relying solely on naturally occurring nanoparticles may not be sufficient or practical. In agriculture, nanotechnology has been primarily used to increase crop production while minimizing losses and activating plant defense mechanisms against pests, insects, and other environmental challenges. Furthermore, nanofertilizers can reduce runoff and nutrient leaching into the environment, improving environmental sustainability. They can also improve fertilizer use efficiency, leading to higher crop yields and reducing the overall cost of fertilizer application. Nanofertilizers are especially beneficial in areas where traditional fertilizers are inefficient or ineffective. Nanofertilizers can provide a more efficient and cost-effective way to fertilize crops while reducing the environmental impact of fertilizer application. They are the product of promising new technology that can help to meet the increasing demand for food and improve agricultural sustainability. Currently, nanofertilizers face limitations, including higher costs of production and potential environmental and safety concerns due to the use of nanomaterials, while further research is needed to fully understand their long-term effects on soil health, crop growth, and the environment.

Green construction and release mechanism of lignin-based double-layer coated urea

BACKGROUND

Lignin played an important role in the establishment of coated fertilizers coating material as a substitute for petrochemical raw materials. However, so far, the lignin-based coated fertilizers was limited in only the poor slow-release performance. To achieve good slow-release performance of lignin-based coated fertilizers, hydrophilic of lignin need to be resolved to establish an green and better controllable lignin-based coated fertilizers.

RESULTS

In the study, a novel green double layer coating with lignin-based polyurethane (LPU) as the inner coating and epoxy resin (EP) as the outer coating was effectively constructed for coated urea. Fourier transform infrared spectra confirmed that lignin and polycaprolactone diol successfully reacted with Hexamethylene diisocyanate. The loss weight and water contact angle (WCA, 75.6-63.6°) of the LPUs decreased with the increased lignin content. The average particle hardness of the lignin-based double-layer coated urea (LDCU) first increased from 58.1 N (lignin of 30%) to 67.0 N (lignin of 60%), but then decreased to 62.3 N (lignin of 70%). The release longevity of the coated urea was closely related to the preparation parameters of the coating material. The optimal cumulative nutrient release rate (79.4%) of LDCU was obtained (lignin of 50%, -CNO/-OH molar ratios of 1.15, EP of 35%, and coating ratio of 5%). The aggregates of hydrone on the LDCU caused the dissolution and swelling of nutrients, and then the diffusion of nutrients through the concentration gradient.

CONCLUSIONS

A though the nutrient release of the LDCUs was affected by many factors, the successful development of the LDCUs will help improve the rapid development of the coated fertilizer industry.

In situ forming dialdehyde xanthan gum-gelatin Schiff-base hydrogels as potent controlled release fertilizers

Controlled release fertilizer (CRF) hydrogels have blossomed into promising materials in agriculture owing to the sustained release of the fertilizer and also as soil conditioner. Apart from the traditional CRF hydrogels; Schiff-base hydrogels have garnered significant thrust that release nitrogen slowly in addition to reducing the environmental pollution. Herein, we have fabricated Schiff-base CRF hydrogels composed of dialdehyde xanthan gum (DAXG) and gelatin. The formation of the hydrogels was accomplished via the simplistic in situ crosslinking reaction between the aldehyde groups of DAXG and the amino groups of gelatin. The hydrogels acquired a compact network upon increasing the DAXG content in the matrix. The phytotoxic assay on different plants indicated the hydrogels to be nontoxic. The hydrogels demonstrated good water-retention behaviour in soil, along with reusability even after 5 cycles. A controlled release profile for urea was evident from the hydrogels wherein macromolecular relaxation played a crucial role in the release mechanism. Growth assays on Abelmoschus esculentus (Okra) plant presented an intuitive evaluation on the growth and water-holding capacity of the CRF hydrogel. The present work demonstrated a facile preparation of CRF hydrogels to enhance the utilization of urea and retain soil humidity as fertilizer carriers.

The influence of N-alkyl chains in benzoyl-thiourea derivatives on urease inhibition: Soil studies and biophysical and theoretical investigations on the mechanism of interaction

Ureases are enzymes produced by fungi, plants, and bacteria associated with agricultural and clinical problems. The urea hydrolysis in NH₃ and CO₂ leads to the loss of N-urea fertilizers in soils and changes the human stomach microenvironment, favoring the colonization of H. pylori. In this sense, it is necessary to evaluate potential enzyme inhibitors to mitigate the effects of their activities and respond to scientific and market demands to produce fertilizers with enhanced efficiency. Thus, biophysical and theoretical studies were carried out to evaluate the influence of the N-alkyl chain in benzoyl-thiourea derivatives on urease enzyme inhibition. A screening based on IC₅₀, binding constants, and theoretical studies demonstrated that BTU1 without the N-alkyl chain (R = H) was more active than other compounds, so the magnitude of the interaction was determined as BTU1 > BTU2 > BTU3 > BTU4 > BTU5, corresponding to progressively increased chain length. Thus, BTU1 was selected for interaction and soil application essays. The binding constants (K_b) for the supramolecular urease-BTU1 complex ranged from 7.95 to 5.71 × 10³ M^-1 at different temperatures (22, 30, and 38 °C), indicating that the preferential forces responsible for the stabilization of the complex are hydrogen bonds and van der Waals forces (ΔH = -15.84 kJ mol^-1 and ΔS = -36.61 J mol^-1 K^-1). Theoretical and experimental results (thermodynamics, synchronous fluorescence, and competition assay) agree and indicate that BTU1 is a mixed inhibitor. Finally, urease inhibition was evaluated in the four soil samples, where BTU1 was as efficient as NBPT (based on ANOVA two-way and Tukey test with 95% confidence), with an average inhibition of 20% of urease activity. Thus, the biophysics and theoretical studies are strategies for evaluating potential inhibitors and showed that increasing the N-alkyl chain in benzoyl-thiourea derivatives did not favor urease inhibition.

Spatiotemporal variation in microplastics derived from polymer-coated fertilizer in an agricultural small river in Ishikawa Prefecture, Japan

Marine plastic pollution has highlighted the need to address the disposal of plastic materials used in agricultural fields and prevent their runoff. To assess the status of microplastics derived from polymer-coated fertilizers (microcapsules), we investigated their seasonal and daily variations in a small agricultural river in Ishikawa Prefecture, Japan, throughout the irrigation period of April to October 2021 and 2022. We also investigated the relationship between microcapsule concentration and water quality. The mean microcapsule concentration over the study period ranged from 0.0 to 783.2 mg/m³ (median 18.8 mg/m³) and was positively correlated with total litter weight, but it was not correlated with common water quality parameters such as total nitrogen or suspended solids. Concentrations of microcapsules in river water showed distinct seasonal variations, being particularly high in late April and late May (median 55.5 mg/m³ in 2021, 62.6 mg/m³ in 2022) and almost undetectable thereafter. The timing of the increase in concentration coincided with the timing of the outflow from paddy fields, suggesting that microcapsules that flowed out of the paddy fields would reach the sea relatively quickly. The results of a tracer experiment supported this conclusion. Intensive observations revealed that microcapsule concentrations varied widely over time, with differences reaching a maximum of 110-fold (range 7.3-783.2 mg/m³) over a 3-day period. Daytime concentrations were higher than those at night, reflecting the fact that microcapsules are discharged from paddies by daytime operations such as puddling and surface drainage. Microcapsule concentrations in the river were not correlated with river discharge, making estimating their loading a future research challenge.

Wood-derived bio-coating materials incorporating hydrophobic lignin and hierarchically porous biochar for high-efficiency coating slow-release fertilizers

Coating slow-release fertilizers (CSRFs) have gained significant attention for their potential to improve nutrient utilization efficiency and prevent environmental pollution through mitigating soil and water contamination. This study developed a novel wood waste-derived composition as a bio-coating material for urea slow-release by integrating modified lignin (PCL) and activated biochar (ABC). PCL was prepared by grafting palmitoyl chloride (PC) with hydrophobic groups to the lignin via an esterification reaction. ABC with a high surface area and hierarchically porous structure created rich channels for ion transportation. These results increased the water-retention ability with a reduced absorbing/expelling rate and confer an excellent Cr(VI) adsorption capacity to the PCL and ABC hybrid coating material (PCL/ABC). The as-prepared PCL/ABC-based CSRF (PCL/ABC-CSRF) showed improving fertilizer slow-release properties for real application (nitrogen release persistence for 40 days at soil). The rice (Oryza sativa L.) hydroponics study suggested that such novel PCL/ABC was conducive to the rice growth in micro metallic contaminated hydroponics by eliminating the accumulation of chromium metal in rice roots. Overall, this study provides an attractive platform for developing biodegradable, heavy-metal adsorbable, and high-efficient CSRFs and a feasible and effective way for functionalized utilization of wood waste.

Zinc oxide nanoparticles coated urea enhances nitrogen efficiency and zinc bioavailability in wheat in alkaline calcareous soils

Nitrogenous fertilizers have low efficiency in alkaline calcareous soils due to volatilization and denitrification. These losses cause economic environmental constraints. Coating of urea with nanoparticles (NPs) is an innovative strategy to improve crop yields by sustaining N availability. In the current study, zinc oxide nanoparticles (ZnO NPs) were synthesized by precipitation method and characterized for morphology and configuration, bond formation, and crystal assemblage using the X-ray diffraction and scanning electron microscope (SEM). The SEM results confirmed the size of ZnO NPs in the size range of 25 nm with cuboid shape. Urea fertilizer, coated with ZnO NPs, was applied to wheat crop in a pot trial. Two rates of ZnO NPs at 2.8 and 5.7 mg kg^-1 were selected to coat the commercial urea. A batch experiment was conducted to ensure the ammonium (NH₄⁺) and nitrate (NO₃^-) ions release by amending the soil with ZnO NPs coated urea and comparing with non-amended soil. The gradual release of NH₄⁺ was observed for 21 days from the ZnO NP-coated urea. In the second part of trial, seven different treatments of coated and uncoated urea were tested on wheat crop. Urea coated with ZnO nanoparticles at 5.7 mg kg^-1 improved all growth attributes and yields. The ZnO NP coated urea increased the N content shoot (1.90 g 100g^-1 DW) and potentially biofortified Zn content (47.86 mg kg^-1) in wheat grain. The results are indicative of viability of a novel coating for commercial urea that will not only reduce N losses but also supplement Zn without additional cost of labor.

Poly(vinyl alcohol)/sodium alginate polymer membranes as eco-friendly and biodegradable coatings for slow release fertilizers

BACKGROUND

The use of slow release fertilizers (SRFs) is an effective approach for reducing agriculture cost, environmental and ecological issues simultaneously. The present study provides a series of poly(vinyl alcohol) (PVA)/sodium alginate (SA) polymer membranes as eco-friendly and biodegradable coatings for SRFs. Moreover, polymer-coated urea (PCU) granules were fabricated through coating the urea granules with the resulting membranes. Our first interest was to fabricate three membranes (PS1, PS2, PS3) of different PVA/SA weight ratios (9:1, 8:2, 7:3) using glutaraldehyde as a crosslinking agent, and crosslink the PS3 membrane with a CaCl₂ solution further to obtain the PC3 membrane. The chemical properties and morphologies of the membranes were characterized. Second, the nitrogen release behavior of the PCU granules was measured and calculated, respectively.

RESULTS

Crosslinking with glutaraldehyde made the PS1, PS2, PS3 membranes uniform and compact, whereas crosslinking with a CaCl₂ solution formed an 'egg box' structure inside the PC3 membrane. PS3 membrane with the minimum PVA/SA weight ratio had the highest hydrophily (water uptake: 106.25%, water contact angle: 55.1^o ), whereas PC3 membrane had the lowest hydrophily (water uptake: 21.57%, water contact angle: 67.3^o ). The biodegradation ratios of the membranes were in the range 44-60% in 90 days, indicating that they had excellent biodegradability. The measured fractional release on the day 30 of the PCU granules ranged from 89.33% to 97.07%. The calculated nitrogen release behavior agreed well with the measured values.

CONCLUSION

The resulting eco-friendly and biodegradable PVA/SA membranes are alternative coatings for SRFs. © 2022 Society of Chemical Industry.

Potential of Rejected Sago Starch as a Coating Material for Urea Encapsulation

Increases in food production to meet global food requirements lead to an increase in the demand for nitrogen (N) fertilizers, especially urea, for soil productivity, crop yield, and food security improvement. To achieve a high yield of food crops, the excessive use of urea has resulted in low urea-N use efficiency and environmental pollution. One promising alternative to increase urea-N use efficiency, improve soil N availability, and lessen the potential environmental effects of the excessive use of urea is to encapsulate urea granules with appropriate coating materials to synchronize the N release with crop assimilation. Chemical additives, such as sulfur-based coatings, mineral-based coatings, and several polymers with different action principles, have been explored and used for coating the urea granule. However, their high material cost, limited resources, and adverse effects on the soil ecosystem limit the widespread application of urea coated with these materials. This paper documents a review of issues related to the materials used for urea coating and the potential of natural polymers, such as rejected sago starch, as a coating material for urea encapsulation. The aim of the review is to unravel an understanding of the potential of rejected sago starch as a coating material for the slow release of N from urea. Rejected sago starch from sago flour processing is a natural polymer that could be used to coat urea because the starch enables a gradual, water-driven mechanism of N release from the urea-polymer interface to the polymer-soil interface. The advantages of rejected sago starch for urea encapsulation over other polymers are that rejected sago starch is one of the most abundant polysaccharide polymers, the cheapest biopolymer, and is fully biodegradable, renewable, and environmentally friendly. This review provides information on the potential of rejected sago starch as a coating material, the advantages of using rejected sago starch as coating material over other polymer materials, a simple coating method, and the mechanisms of N release from urea coated with rejected sago starch.

Converting food waste into soil amendments for improving soil sustainability and crop productivity: A review

One-third of the annual food produced globally is wasted and much of the food waste (FW) is unutilized; however, FW can be valorized into value-added industrial products such as biofuel, chemicals, and biomaterials. Converting FW into soil amendments such as compost, vermicompost, anaerobic digestate, biofertilizer, biochar, and engineered biochar is one of the best nutrient recovery and FW reuse approaches. The soil application of FW-based amendments can improve soil fertility, increase crop production, and reduce contaminants by altering soil's chemical, physical, microbial, and faunal properties. However, the efficiency of the amendment for improving ecosystem sustainability depends on the type of FW, conversion method, application rate, soil type, and crop type. Engineered biochar/biochar composite materials produced using FW have been identified as promising amendments for soil remediation, reducing commercial fertilizer usage, and increasing soil nutrient use efficiency. The development of quality standards and implementation of policies and regulations at all stages of the food supply chain are necessary to manage (reduce and re-use) FW.

Cellulose Acetate Microbeads for Controlled Delivery of Essential Micronutrients

The controlled delivery of micronutrients to soil and plants is essential to increase agricultural yields. However, this is today achieved using fossil fuel-derived plastic carriers, posing environmental risks and contributing to global carbon emissions. In this work, a novel and efficient way to prepare biodegradable zinc-impregnated cellulose acetate beads for use as controlled release fertilizers is presented. Cellulose acetate solutions in DMSO were dropped into aqueous antisolvent solutions of different zinc salts. The droplets underwent phase inversion, forming solid cellulose acetate beads containing zinc, as a function of zinc salt type and concentration. Even higher values of zinc uptake (up to 15.5%) were obtained when zinc acetate was added to the cellulose acetate-DMSO solution, prior to dropping in aqueous zinc salt antisolvent solutions. The release profile in water of the beads prepared using the different solvents was linked to the properties of the counter-ions via the Hofmeister series. Studies in soil showed the potential for longer release times, up to 130 days for zinc sulfate beads. These results, together with the efficient bead production method, demonstrate the potential of zinc-impregnated cellulose acetate beads to replace the plastic-based controlled delivery products used today, contributing to the reduction of carbon emissions and potential environmental impacts due to the uptake of plastic in plants and animals.

Starch-based controlled release fertilizers: A review

Starch, as a widely available renewable resource, has the potential to be used in the production of controlled-release fertilizers (CRFs) that support sustainable agriculture. These CRFs can be formed by incorporating nutrients through coating or absorption, or by chemically modifying the starch to enhance its ability to carry and interact with nutrients. This review examines the various methods of creating starch-based CRFs, including coating, chemical modification, and grafting with other polymers. In addition, the mechanisms of controlled release in starch-based CRFs are discussed. Overall, the potential benefits of using starch-based CRFs in terms of resource efficiency and environmental protection are highlighted.

Opportunities and Challenges for Lignin Valorization in Food Packaging, Antimicrobial, and Agricultural Applications

The exploration of renewable resources is essential to help transition toward a more sustainable materials economy. The valorization of lignin can be a key component of this transition. Lignin is an aromatic polymer that constitutes approximately one-third of the total lignocellulosic biomass and is isolated in huge quantities as a waste material of biofuel and paper production. About 98% of the 100 million tons of lignin produced each year is simply burned as low-value fuel, so this renewable polymer is widely available at very low cost. Lignin has valuable properties that make it a promising material for numerous applications, but it is far from being fully exploited. The aim of this Perspective is to highlight opportunities and challenges for the use of lignin-based materials in food packaging, antimicrobial, and agricultural applications. In the first part, the ongoing research and the possible future developments for the use of lignin as an additive to improve mechanical, gas and UV barrier, and antioxidant properties of food packaging items will be treated. Second, the application of lignin as an antimicrobial agent will be discussed to elaborate on the activity of lignin against bacteria, fungi, and viruses. Finally, the use of lignin in agriculture will be presented by focusing on the application of lignin as fertilizer.

Nutrient controlled release performance of bio-based coated fertilizer enhanced by synergistic effects of liquefied starch and siloxane

The porous structure and hydrophilicity of coating shells affect the nutrient controlled-release performance of castor oil-based (CO) coated fertilizers. In order to solve these problems, in this study, the castor oil-based polyurethane (PCU) coating material was modified with liquefied starch polyol (LS) and siloxane, and a new coating material with cross-linked network structure and hydrophobic surface was synthesized, and used it to prepare the coated controlled-release urea (SSPCU). The results demonstrated that the cross-linked network formed by LS and CO improved the density and reduced the pores on the surface of the coating shells. The siloxane was grafted on the surface of coating shells to improve its hydrophobicity and thus delayed water entry. The nitrogen release experiment indicated that the synergistic effects of LS and siloxane improved the nitrogen controlled-release performance of bio-based coated fertilizers. Nutrient released longevity of SSPCU with 7 % coating percentage reached >63 days. Moreover, the nutrient release mechanism of coated fertilizer was further revealed by the analysis of the release kinetics analysis. Therefore, the results of this study provide a new idea and technical support for development of efficient and environment-friendly bio-based coated controlled-release fertilizers.

Evaluation of Physicochemical Properties of Sustained-Release Membranes Based on Analytic Hierarchy

In this paper, the optimal analytic hierarchy process was used to establish a comprehensive evaluation model for the physicochemical properties of composite sustained-release membrane materials based on water absorption (XS), water permeability (TS), tensile strength (KL), elongation at break (DSL), fertilizer permeability (TF), and viscosity (ND), and the optimal ratio parameters of membrane material were determined. Analytic hierarchy process (AHP) combined with correlation analysis was used to construct the judgment matrix of physicochemical properties, which passed the consistency test, and to determine the weight and ranking of each index: TF (0.6144) > XS (0.1773) > KL (0.1561) > ND (0.1311) > TS (0.0775) > DSL (0.0520). The comprehensive scores of sustained-release membrane materials under different treatments were calculated based on normalized data samples and weights. It was determined that the percentage of each component in the best comprehensive performance of the slow-release membrane material was as follows: polyvinyl alcohol, polyvinylpyrrolidone, zeolite, and epoxy resin were 7.3%, 0.7%, 0.5%, and 2%, respectively.