Nanoporous materials for pesticide formulation and delivery in the agricultural sector

Cellulose nanocrystals-based Pickering emulsion with enhanced foliar adhesion and pH responsiveness for intelligent delivery of pesticides

Pickering emulsions stabilized by functionalized natural macromolecules have emerged with promising responsiveness for pesticide encapsulation and release. This study developed Pickering emulsions using amine-modified cellulose nanocrystals (ACNCs) as stabilizers. The resultant O/W ACNCs-Pickering emulsions (ACNCs-Pickering) exhibited long-term storage stability and showed increasing emulsion stability depending on the concentration of ACNCs. Imidacloprid (IMI) was subsequently loaded onto the ACNCs-Pickering to form the IMI@ACNCs-Pickering via the in-situ loading route. The release rate of IMI demonstrated a notable pH responsiveness. Moreover, the IMI@ACNCs-Pickering prepared with an ACNCs concentration of 3 wt% showed optimal performances. Its foliar adhesion on Chinese cabbage (Brassica rapa L.ssp.pekinensis) was significantly higher than that of the commercial IMI formulation (70 WS, Bayer®, LS200032) (DG). In detail, the pesticide residue for the IMI@ACNCs-Pickering was 3.8 folds to that for DG after spraying and washing for 10 min. Also, the green peach aphid mortality rate was 98.33 %, which was 1.1 folds higher than that of the DG group. The present work developed a Pickering emulsion-based fat-soluble pesticide formulation with excellent foliar adhesion, resistance to rainfall washout, and insecticidal effect. It provided a new option to ensure the sustainable development of green agriculture.

Spherical Assembly of Halloysite Clay Nanotubes as a General Reservoir of Hydrophobic Pesticides for pH-Responsive Management of Pests and Weeds

The development of smart systems for pesticidal delivery presents a significant advancement in enhancing the utilization efficiency of pesticides and mitigating environmental risks. Here an acid-responsive pesticidal delivery system using microspheres formed by the self-assembly of halloysite clay nanotubes (HNTs) is proposed. Insecticide avermectin (AVM) and herbicide prometryn (PMT) are used as two models of hydrophobic pesticide and encapsulated within the porous microspheres, followed by a coating of tannic acid/iron (TA/FeIII) complex films to generate two controlled-release pesticides, named as HCEAT and HCEPT, resulting in the loading capacity of AVM and PMT being 113.3 and 120.3 mg g-1, respectively. Both HCEAT and HCEPT exhibit responsiveness to weak acid, achieving 24 h-release ratios of 85.8% and 80.5% at a pH of 5.5. The experiment and simulation results indicate that the coordination interaction between EDTA2- and Ca2+ facilitates the spherical aggregation of HNTs. Furthermore, these novel pesticide formulations demonstrate better resistance against ultraviolet (UV) irradiation, higher foliar affinity, and less leaching effect, with negligible impact of the carrier material on plants and terrestrial organisms. This work presents a promising approach toward the development of efficient and eco-friendly pesticide formulations, greatly contributing to the sustainable advancement of agriculture.

Avicenna's views on pest control and medicinal plants he prescribed as natural pesticides

The present study aimed to introduce Avicenna's views on pest control and the medicinal plants he proposed as natural pesticides. Also, we addressed the strategies that he leveraged to formulate and prescribe them, and, finally, we put his views into perspective with modern science. The data were collected using Al-Qanun Fi Al-Tibb (The Canon of Medicine) as well as scientific databases. According to Al-Qanun Fi Al-Tibb, 42 medicinal plants are described as natural pest control agents. After introducing the pest control properties of each plant, Avicenna explained the appropriate strategies for use of these plants. These strategies or formulations included incensing, spraying, spreading, rubbing, smudging, and scent-dispersing, which are equivalent to the modern pesticide formulations of fumigants, aerosols, pastes and poisoned baits, lotions, creams, and slow-release formulations, respectively. This study revealed that Avicenna introduced the pest control approach with natural plants in his book Al-Qanun Fi Al-Tibb and, thus, harnessed the power of nature to control nature. Future research is recommended to find the pest control merits of the presented medicinal plants, in order to incorporate them into pest control programs and reduce environmental pollution resulting from the complications of current synthetic pesticides.

A review on the encapsulation of "eco-friendly" compounds in natural polymer-based nanoparticles as next generation nano-agrochemicals for sustainable agriculture and crop management

Crop management techniques and sustainable agriculture offer a comprehensive farming method that incorporates social, economic, and ecological factors. Sustainable agriculture places a high priority on soil health, water efficiency, and biodiversity conservation in order to develop resilient and regenerative food systems that can feed both the current and future generations. Our goal in this review is to give a thorough overview of current developments in the use of polysaccharides as raw materials for the encapsulation of natural chemicals in nanoparticles as novel crop protection products. The search for recent research articles and latest reviews has been carried out through pubmed, google scholar, BASE as search engines. Offer cutting-edge solutions for sustainable crop management that satisfy the demands of an expanding population, comply with changing legal frameworks, and address environmental issues by encasing natural compounds inside polysaccharide-based nanoparticles. A variety of natural substances, such as essential oils, plant extracts, antimicrobials compounds and miRNA, can be included in these nanoparticles. These materials have many advantages, such as biocompatibility, biodegradability and controlled release of active compounds. Thanks to their action mechanism, they are able to mediate hormone signaling and gene expression in different plant physiological aspects, as well as enhance their tolerance to abiotic stress conditions. Sustainable agriculture can be supported by this type of treatments, correctly developing food safety through the production of non-toxic nanoparticles, low-cost industrial scale-up and the use of biodegradable materials. Polysaccharide-based nanoparticles have a wide range of uses in agriculture: they improve crop yields, encourage "eco-friendly" farming methods and can decrease the concentrations of active ingredient used, providing an accurate and affective dosage without damaging further species, as well as avoiding treatment resistance risks. These nanoparticles can also reduce the negative effects of chemical fertilizers and pesticides, contributing to the environmentally friendly agricultural development. Furthermore, the application of polysaccharide-based nanoparticles is consistent with the expanding trend of green and sustainable agriculture.

Biopolymeric and lipid-based nanotechnological strategies for the design and development of novel mosquito repellent systems: recent advances

Mosquitoes are the most medically important arthropod vectors of several human diseases. These diseases are known to severely incapacitate and debilitate millions of people, resulting in countless loss of lives. Over the years, several measures have been put in place to control the transmission of mosquito-borne diseases, one of which is using repellents. Repellents are one of the most effective personal protective measures against mosquito-borne diseases. However, conventional delivery systems of repellents (e.g., creams, gels, and sprays) are plagued with toxicity and short-term efficacy issues. The application of biopolymeric and lipid-based systems has been explored over the years to develop better delivery systems for active pharmaceutical ingredients including mosquito repellents. These delivery systems (e.g., solid lipid micro/nanoparticles, micro/nanoemulsions, or liposomes) possess desirable properties such as high biocompatibility, versatility, and controlled/sustained drug delivery, and thus are very important in tackling the clinical challenges of conventional repellent systems. Their capability for controlled/sustained drug release has improved patient compliance as it removes the need for consistent reapplication of repellents. They can also be engineered to reduce repellents' skin permeation, consequently improving their safety. However, despite the benefits that these systems offer very few of them have been successfully translated to the global market for commercial use, a vital challenge that previous reports have not thoroughly examined. The issue of limited clinical translation of novel repellent systems is a vital aspect to consider, as the ultimate goal is to move these systems from bench to bedside. As such, this study seeks to highlight the recent advances in the use of biopolymeric and lipid-based systems for the development of novel mosquito-repellent systems and also analyze the challenges that have limited the clinical translation of these systems while proposing possible strategies to overcome these challenges.

Isothiocyanate-Based Microemulsions Loaded into Biocompatible Hydrogels as Innovative Biofumigants for Agricultural Soils

Biofumigation was proposed as an alternative to synthetic pesticides for the disinfection of agricultural soils, in view of the biocidal effect of isothiocyanates (ITCs) released by some vegetal species, like Brassicaceae. However, biofumigation also presents limitations; thus, a novel and viable alternative could be the direct introduction of ITCs into agricultural soils as components loaded into biodegradable hydrogels. Thus, in this work, ITCs-based microemulsions were developed, which can be loaded into porous polymer-based hydrogel beads based on sodium alginate (ALG) or sodium carboxymethyl cellulose (CMC). Three ITCs (ethyl, phenyl, and allyl isothiocyanate) and three different surfactants (sodium dodecylsulfate, Brij 35, and Tween 80) were considered. The optimal system was characterized with attenuated ATR-FTIR spectroscopy and differential scanning calorimetry to study how the microemulsion/gels interaction affects the gel properties, such as the equilibrium water content or free water index. Finally, loading and release profiles were studied by means of UV-Vis spectrophotometry. It was found that CMC hydrogel beads showed a slightly more efficient profile of micelles' release in water with respect to ALG beads. For this reason, and due to the enhanced contribution of Fe(III) to their biocidal properties, CMC-based hydrogels are the most promising in view of the application on real agricultural soils.

Bayesian Optimization for Efficient Prediction of Gas Uptake in Nanoporous Materials

The discovery and optimization of novel nanoporous materials (NPMs) such as Metal-Organic Frameworks (MOFs) and Covalent Organic Frameworks (COFs) are crucial for addressing global challenges like climate change, energy security, and environmental degradation. Traditional experimental approaches for optimizing these materials are time-consuming and resource-intensive. This research paper presents a strategy using Bayesian optimization (BO) to efficiently navigate the complex design spaces of NPMs for gas storage applications. For a MOF dataset drawn from 19 different sources, we present a quantitative evaluation of BO using a curated set of surrogate model and acquisition function couples. In our study, we employed machine learning (ML) techniques to conduct regression analysis on many models. Following this, we identified the three ML models that exhibited the highest accuracy, which were subsequently chosen as surrogates in our investigation, including the conventional Gaussian Process (GP) model. We found that GP with expected improvement (EI) as the acquisition function but without a gamma prior which is standard in Bayesian Optimisation python library (BO Torch) outperforms other surrogate models. Additionally, it should be noted that while the machine learning model that exhibits superior performance in predicting the target variable may be considered the best choice, it may not necessarily serve as the most suitable surrogate model for BO. This observation has significant importance and warrants further investigation. This comprehensive framework accelerates the pace of materials discovery and addresses urgent needs in energy storage and environmental sustainability. It is to be noted that rather than identifying new MOFs, BO primarily enhances computational efficiency by reducing the reliance on more demanding calculations, such as those involved in Grand Canonical Monte Carlo (GCMC) or Density Functional Theory (DFT).

Antifungal Activity of Difenoconazole-Loaded Microcapsules against Curvularia lunata

Difenoconazole-loaded (CS-DIF) microcapsules were synthesized by encapsulating difenoconazole into biocompatible chitosan. The physical and chemical properties indicated that the encapsulation and chemical loading rates were 85.58% and 61.98%, respectively. The microcapsules exhibited prominent controlled-release and surface stability performance. The cumulative release rate was only 33.6% in 168 h, and the contact angle decreased by 11.73° at 120 s compared with difenoconazole. The antifungal activity of the CS-DIF microcapsules against Curvularia lunata was confirmed through observations of colony growth, in vitro and in vivo inoculation, mycelium morphology, as well as DNA and protein leakage. The antioxidant enzyme activity of superoxide dismutase, peroxidase, and catalase decreased by 65.1%, 84.9%, and 69.7%, respectively, when Curvularia lunata was treated with 200 μg/mL microcapsules, compared with the control in 24 h. The enzymatic activity of polyphenol oxidase decreased by 323.8%. The reactive oxygen species contents of hydrogen peroxide and superoxide anions increased by 204.6% and 164%, respectively. Additionally, the soluble sugar and soluble protein contents decreased by 65.5% and 69.6%, respectively. These findings provided a novel approach to control the growth of C. lunata efficiently, laying a foundation for reducing the quantity and enhancing the efficiency of chemical pesticides. The CS-DIF microcapsules exhibited a strong inhibitory effect on fungus, effectively preventing and controlling leaf spot disease and showing potential for field applications. This study might be of great significance in ensuring plant protection strategies.

Bentonite in Korea: A Resource and Research Focus for Biomedical and Cosmetic Industries

This study provides an in-depth review of bentonite, focusing on its applications in Korea's biomedical and cosmetic sectors. It delves into bentonite's chemical properties, which make it a valuable resource in various industries, particularly in the health and beauty industries. We discuss bentonite's antimicrobial properties, showcasing its effectiveness against a wide range of pathogens and its potential as a biomedicine adjuvant to boost immune responses. Despite its benefits, the review also addresses the need for caution due to its possible side effects when used in human therapy. In the cosmetics industry, bentonite is prized for its ability to absorb impurities, making it a popular ingredient in products from leading brands. The review highlights the ongoing research and development efforts aiming to further explore bentonite's capabilities and applications, underlining the material's significant contribution to advancing Korea's innovation in the biomedical and cosmetic fields. This review suggests that with more research, bentonite's full potential can be unlocked, offering new opportunities for these industries.

A state-of-the-art review on biomass-derived carbon materials for supercapacitor applications: From precursor selection to design optimization

Biomass-derived carbon materials have the characteristics of a wide range of precursor sources, controllable carbon nano-dimension, large specific surface area and abundant heteroatoms doping. At present, biomass-derived carbon materials have been widely used in electrochemical energy storage devices, especially the research and development of biomass-derived carbon materials for supercapacitors has become mature and in-depth. Therefore, it is of importance to summarize the advanced technologies and strategies for optimizing biomass-derived carbon materials for supercapacitors, which will effectively promote the further development of high-performance supercapacitors. In this review, the recent research progress of biomass-derived carbon materials is provided in detail, including the selection of biomass precursors, the design of carbon nano-dimension and the theory of heteroatom doping. Besides, the preparation methods of biomass-derived carbon materials and the related processes of optimizing the electrochemical performance are also summarized. This review ends with the perspectives for future research directions and challenges in the field of biomass-derived carbon materials for electrochemical applications. This review aims to provide helpful reference information for the nano-dimensional design and electrochemical performance optimization of biomass-derived carbon materials for the practical application of supercapacitors.

Synthesis and Characterization of Mesoporous Silica Nanoparticles Loaded with P-Cymene against Rice Bacterial Blight

Mesoporous silica nanoparticles (MSNs) can be used as carrier materials for the controlled release of pesticides while reducing their negative environmental impact. In this study, we screened an active ingredient, p-cymene (PC), with an excellent inhibitory effect on rice bacterial blight. Subsequently, the PC was successfully loaded onto MSNs via physisorption (PC@MSNs). PC@MSNs, characterized by a regular spherical shape, smooth surface, and an MSN average size of 262.9 nm, achieved an 8.6% drug loading capacity. The release kinetics of the PC from the PC@MSNs demonstrated a sustained release (288 h) pattern influenced by drug diffusion. The efficacy of the PC@MSNs against Xanthomonas oryzae pv. Oryzae paralleled those of PC. Acute toxicity assays revealed that the PC@MSNs were less toxic to aquatic life (LC50 = 257.867 mg/L) and that the formulation showed no adverse effects on rice seedling growth. In summary, these results suggest that PC@MSNs can broaden PC's scope of application in managing rice diseases.

Green Hydrogels Loaded with Extracts from Solanaceae for the Controlled Disinfection of Agricultural Soils

The UN 2030 Agenda for Sustainable Development established the goal of cutting the use of pesticides in the EU by 50% by 2030. However, a ban on pesticides could seriously affect the productivity of agriculture, resulting in severe issues due to global hunger and food deficiency. Controlled release (CR) of bioactive chemicals could play a valid alternative in this context. To this aim, two biodegradable polymers, namely sodium alginate (AL) and sodium carboxymethylcellulose (CMC), were employed to obtain crosslinked hydrogel beads for the encapsulation and CR of glycoalkaloids extracted from tomato and potato leaves to be used as biocompatible disinfectants for agricultural soils. The physico-chemical characterization of the controlled-release systems was carried out by means of Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy, Scanning Electron Microscopy (SEM), thermogravimetry (TGA), differential scanning calorimetry (DSC) (FWI > 80%) and drying kinetics. The plant extracts and the encapsulation efficiency (~84%) were, respectively, characterized and evaluated by High-performance Liquid Chromatography-Mass Spectrometry (HPLC-MS). Finally, preliminary microbiological tests were conducted to test the efficacy of the most promising systems as biocidal formulations both in the lab and on a model soil, and interesting results were obtained in the reduction of bacterial and fungal load, which could lead to sustainable perspectives in the field.

Exploring the Potential of Nanoporous Materials for Advancing Ophthalmic Treatments

The landscape of ophthalmology is undergoing significant transformations, driven by technological advancements and innovations in materials science. One of the advancements in this evolution is the application of nanoporous materials, endowed with unique physicochemical properties ideal for a variety of ophthalmological applications. Characterized by their high surface area, tunable porosity, and functional versatility, these materials have the potential to improve drug delivery systems and ocular devices. This review, anchored by a comprehensive literature focusing on studies published within the last five years, examines the applications of nanoporous materials in ocular drug delivery systems (DDS), contact lenses, and intraocular lenses. By consolidating the most current research, this review aims to serve as a resource for clinicians, researchers, and material scientists engaged in the rapidly evolving field of ophthalmology.

Nano-based smart formulations: A potential solution to the hazardous effects of pesticide on the environment

Inefficient usage, overdose, and post-application losses of conventional pesticides have resulted in severe ecological and environmental issues, such as pesticide resistance, environmental contamination, and soil degradation. Advances in nano-based smart formulations are promising novel methods to decrease the hazardous impacts of pesticide on the environment. In light of the lack of a systematic and critical summary of these aspects, this work has been structured to critically assess the roles and specific mechanisms of smart nanoformulations (NFs) in mitigating the adverse impacts of pesticide on the environment, along with an evaluation of their final environmental fate, safety, and application prospects. Our study provides a novel perspective for a better understanding of the potential functions of smart NFs in reducing environmental pollution. Additionally, this study offers meaningful information for the safe and effective use of these nanoproducts in field applications in the near future.

Flexible free-standing antibacterial nanoporous Ag ribbon

The biomedical field has the potential to significantly benefit from the use of flexible free-standing Ag nanostructures due to their outstanding mechanical and antibacterial properties. However, the intricate process of synthesizing these nanostructures, as well as the potential toxicity of nanostructured Ag, pose significant challenges. This study used a facile etching method to synthesize the free-standing nanoporous Ag (NP-Ag) ribbons with a homogeneous and bicontinuous three-dimensional ligament structure. The free-standing NP-Ag ribbons demonstrated stable mechanical performance and excellent flexibility when subjected to various deformation states on artificial fingers. Additionally, the NP-Ag ribbons exhibited remarkable antibacterial capacity with rates of 99.81 ± 0.14% against Escherichia coli, 96.11 ± 1.49% against Staphylococcus aureus, and 95.37 ± 1.24% against methicillin-resistant Staphylococcus aureus. The antibacterial mechanism of NP-Ag is attributed to the rapid release of Ag ions (Ag⁺) in 24 h, causing damage to the bacterial membrane. Moreover, the in vivo results demonstrate that the NP-Ag ribbons provide rapid antibacterial efficacy and are biosafe due to the long-term stable Ag⁺ release of NP-Ag. The development of these free-standing flexible NP-Ag ribbons offers a new avenue for wearable antibacterial applications.

Plant nanobionics: Fortifying food security via engineered plant productivity

The world's human population is increasing exponentially, increasing the demand for high-quality food sources. As a result, there is a major global concern over hunger and malnutrition in developing countries with limited food resources. To address this issue, researchers worldwide must focus on developing improved crop varieties with greater productivity to overcome hunger. However, conventional crop breeding methods require extensive periods to develop new varieties with desirable traits. To tackle this challenge, an innovative approach termed plant nanobionics introduces nanomaterials (NMs) into cell organelles to enhance or modify plant function and thus crop productivity and yield. A comprehensive review of nanomaterials affect crop yield is needed to guide nanotechnology research. This article critically reviews nanotechnology applications for engineering plant productivity, seed germination, crop growth, enhancing photosynthesis, and improving crop yield and quality, and discusses nanobionic approaches such as smart drug delivery systems and plant nanobiosensors. Moreover, the review describes NM classification and synthesis and human health-related and plant toxicity hazards. Our findings suggest that nanotechnology application in agricultural production could significantly increase crop yields to alleviate global hunger pressures. However, the environmental risks associated with NMs should be investigated thoroughly before their widespread adoption in agriculture.

Preparation and Characterization of Insecticide/Calix[4]arene Complexes and Their Enhanced Insecticidal Activities against Plutella xylostella

Applications of supramolecular materials in plant protection have attracted significant interest in recent years. To develop a feasible method to improve the efficacy and reduce the usage of chemical pesticides, the effect of calix[4]arene (C4A) inclusion on enhancing the insecticidal activity of commercial insecticides was investigated. Results showed that all three tested insecticides (chlorfenapyr, indoxacarb, and abamectin) with distinct molecular sizes and modes of action were able to form stable 1:1 host-guest complexes with C4A through simple preparation steps. The insecticidal activities of the complexes against Plutella xylostella were effectively enhanced compared to the guest molecule, with the synergism ratio being up to 3.05 (for indoxacarb). An obvious correlation was found between the enhanced insecticidal activity and the high binding affinity between insecticide and C4A, while the improvement in water solubility may not be a determining factor. The work would provide hints for the further development of functional supramolecular hosts as synergists in pesticide formulations.

Development of emamectin benzoate-loaded liposome nano-vesicles with thermo-responsive behavior for intelligent pest control

Pesticides play an important role in agricultural disease and pest control. However, the low utilization efficiency and environmentally unfriendly disadvantages of conventional pesticide formulations cause substantial environmental and ecological damage. Constructing intelligent controlled-release pesticide systems via nanotechnology is a feasible way to overcome these defects. In this research, an emamectin benzoate-loaded liposome nano-vesicle (EB-Lip-NV) with a multicompartment structure and thermo-responsive characteristics was developed to accurately control nocturnal pests and improve insecticidal activity. EB-Lip-NV is an unusual low-temperature rapid-release system based on phase transitions of the liposome membrane. Compared with the conventional water-soluble granule (SG), the EB-Lip-NV exhibited higher control activity on Spodoptera exigua. More importantly, the control efficacy of Spodoptera exigua at 20 °C was around 1.4 times that at 40 °C because of low temperature-induced rapid release. This controlled-release behavior of EB-Lip-NV in response to temperature change could effectively control the population of nocturnal pests. In addition, the toxicity of the EB-Lip-NV towards zebrafish was lower than that of SG by above 50%. This study provides a new strategy for constructing intelligent controlled-release pesticide systems with improving utilization rate and reducing harm to the environment and non-target organisms.

Advances in stimuli-responsive systems for pesticides delivery: Recent efforts and future outlook

Effective pest management for enhanced crop output is one of the primary goals of establishing sustainable agricultural practices in the world. Pesticides are critical in preventing biological disasters, ensuring crop productivity, and fostering sustainable agricultural production growth. Studies showed that crops are unable to properly utilize pesticides because of several limiting factors, such as leaching and bioconversion, thereby damaging ecosystems and human health. In recent years, stimuli-responsive systems for pesticides delivery (SRSP) by nanotechnology demonstrated excellent promise in enhancing the effectiveness and safety of pesticides. SRSP are being developed with the goal of delivering precise amounts of active substances in response to biological needs and environmental factors. An in-depth analysis of carrier materials, design fundamentals, and classification of SRSP were provided. The adhesion of SRSP to crop tissue, absorption, translocation in and within plants, mobility in the soil, and toxicity were also discussed. The problems and shortcomings that need be resolved to accelerate the actual deployment of SRSP were highlighted in this review.

Degradable Self-Destructive Redox-Responsive System Based on Mesoporous Organosilica Nano-Vehicles for Smart Delivery of Fungicide

The development of stimuli-responsive controlled release formulations is a potential method of improving pesticide utilization efficiency and alleviating current pesticide-related environmental pollution. In this study, a self-destruction redox-responsive pesticide delivery system using biodegradable disulfide-bond-bridged mesoporous organosilica (DMON) nanoparticles as the porous carriers and coordination complexes of gallic acid (GA) and Fe(III) ions as the capping agents were established for controlling prochloraz (PRO) release. The GA-Fe(III) complexes deposited onto the surface of DMON nanoparticles could effectively improve the light stability of prochloraz. Due to the decomposition of GA-Fe(III) complexes, the nano-vehicles had excellent redox-responsive performance under the reducing environments generated by the fungus. The spreadability of PRO@DMON-GA-Fe(III) nanoparticles on the rice leaves was increased due to the hydrogen bonds between GA and rice leaves. Compared with prochloraz emulsifiable concentrate, PRO@DMON-GA-Fe(III) nanoparticles showed better fungicidal activity against Magnaporthe oryzae with a longer duration under the same concentration of prochloraz. More importantly, DMON-GA-Fe(III) nanocarriers did not observe obvious toxicity to the growth of rice seedlings. Considering non-toxic organic solvents and excellent antifungal activity, redox-responsive pesticide controlled release systems with self-destruction properties have great application prospects in the field of plant disease management.

Nanosheet-Facilitated Spray Delivery of dsRNAs Represents a Potential Tool to Control Rhizoctonia solani Infection

Rhizoctonia solani is one of the important pathogenic fungi causing several serious crop diseases, such as maize and rice sheath blight. Current methods used to control the disease mainly depend on spraying fungicides because there is no immunity or high resistance available in crops. Spraying double-strand RNA (dsRNA) for induced-gene silencing (SIGS) is a new potentially sustainable and environmentally friendly tool to control plant diseases. Here, we found that fluorescein-labelled EGFP-dsRNA could be absorbed by R. solani in co-incubation. Furthermore, three dsRNAs, each targeting one of pathogenicity-related genes, RsPG1, RsCATA, and RsCRZ1, significantly downregulated the transcript levels of the target genes after co-incubation, leading to a significant reduction in the pathogenicity of the fungus. Only the spray of RsCRZ1 dsRNA, but not RsPG1 or RsCATA dsRNA, affected fungal sclerotium formation. dsRNA stability on leaf surfaces and its efficiency in entering leaf cells were significantly improved when dsRNAs were loaded on layered double hydroxide (LDH) nanosheets. Notably, the RsCRZ1-dsRNA-LDH approach showed stronger and more lasting effects than using RsCRZ1-dsRNA alone in controlling pathogen development. Together, this study provides a new potential method to control crop diseases caused by R. solani.

Recent advances in electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs) for sensing pharmaceutical and food pollutants

Foodborne-related infections due to additives and pollutants pose a considerable task for food processing enterprises. Therefore, the competent, cost-effective, and quick investigation of nutrition additives and contaminants is essential to reduce the threat of public fitness problems. The electrochemical sensor (ECS) shows facile and potent analytical approaches desirable for food protection and quality inspection over traditional methods. The consequence of a broad display of nanomaterials has paved the path for their relevance in designing high-performance ECSs appliances for medical diagnostics and conditions and food protection. This review article has discussed the importance of electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs). Initially, we have demonstrated the types of pharmaceutical and food/agriculture pollutants (such as pesticides, heavy metals, antibiotics and other medical drugs) present in water. Subsequently, we have compiled the information on electrochemical techniques (such as voltammetric and electrochemical impedance spectroscopy) and their crucial parameters for detecting pollutants. Further, the applications of CNMs for sensing pharmaceutical and food pollutants have been demonstrated in detail. Finally, the topic has been concluded with existing challenges and future prospects.

Thermo-Responsive Quaternary Ammonium Chitosan Nanocapsules with On-Demand Controlled Pesticide Release and Maximally Synergistic Biological Activity

Pesticides play an important role in pest control. However, they can be limited due to low utilization efficiency, causing substantial losses to the environment and ecological damage. Nanotechnology is an active area of research regarding encapsulation of pesticides for sustainable pest control. Here, we developed intelligent formulations of avermectin (Av) quaternary ammonium chitosan surfactant (QACS) nanocapsules (i.e., Av-Th@QACS) with on-demand controlled release properties, toward ambient temperature and maximal synergistic biological activity of Av and QACS. The Av-Th@QACS regulated the quantity of pesticide release in accordance with the ambient temperature changes and, insofar as this release is a means of responding to variations in pest populations, maximized the synergistic activity. In addition, the Av-Th@QACS were highly adhesive to crop leaves as a result of the prolonged retention time on the crop leaves. Therefore, Av-Th@QACS exhibited greater control against aphids at 35 °C than at 15 and 25 °C. Compared with commercial formulations, Av-Th@QACS was more toxic at 35 °C and less toxic at 15 °C. Thus, researchers can apply Av-Th@QACS as intelligent nanopesticides with an on-demand, controlled release and synergistic biological activity and, in so doing, prolong pesticide duration and improve the utilization efficiency.

Recent Advancements in the Fabrication of Functional Nanoporous Materials and Their Biomedical Applications

Functional nanoporous materials are categorized as an important class of nanostructured materials because of their tunable porosity and pore geometry (size, shape, and distribution) and their unique chemical and physical properties as compared with other nanostructures and bulk counterparts. Progress in developing a broad spectrum of nanoporous materials has accelerated their use for extensive applications in catalysis, sensing, separation, and environmental, energy, and biomedical areas. The purpose of this review is to provide recent advances in synthesis strategies for designing ordered or hierarchical nanoporous materials of tunable porosity and complex architectures. Furthermore, we briefly highlight working principles, potential pitfalls, experimental challenges, and limitations associated with nanoporous material fabrication strategies. Finally, we give a forward look at how digitally controlled additive manufacturing may overcome existing obstacles to guide the design and development of next-generation nanoporous materials with predefined properties for industrial manufacturing and applications.