Biosorptive uptake of ibuprofen by steam activated biochar derived from mung bean husk: Equilibrium, kinetics, thermodynamics, modeling and eco-toxicological studies

Towards sorptive eradication of pharmaceutical micro-pollutant ciprofloxacin from aquatic environment: A comprehensive review

Antibiotics are widely prioritized pharmaceuticals frequently adopted in medication for addressing numerous ailments of humans and animals. However, the non-judicious disposal of ciprofloxacin (CIP) with concentration levels exceeding threshold limit in an aqueous environment has been the matter of growing concern nowadays. CIP is found in various waterways with appreciable mobility due to its limited decay in solidified form. Hence, the effective eradication strategy of this non-steroidal anti-inflammatory antibiotic from aqueous media is pivotal for preventing the users and the biosphere from their hazardous impacts. Reportedly several customary techniques like reverse osmosis, precipitation, cross-filtration, nano-filtration, ion exchange, microbial remediation, and adsorption have been employed to eliminate CIP from water. Out of them, adsorption is ascertained to be a potential method because of lesser preliminary investment costs, ease of operation, greater efficiency, less energy usage, reduced chemical and biological slurry production, and ready availability of precursor materials. Towards remediation of ciprofloxacin-laden water, plenty of researchers have used different adsorbents. However, the present-day challenge is opting the promising sorbent and its application towards industrial scale-up which is vital to get reviewed. In this article, adsorbents of diverse origins are reviewed in terms of their performances in CIP removal. The review stresses the impact of various factors on sorptive assimilation of CIP, adsorption kinetics, isotherms, mechanism of ionic interaction, contrivances for CIP detection, cost estimation and reusability assessments of adsorbents also that may endorse the next-generation investigators to decide the efficacious, environmental appealing and cost-competitive adsorbents for effective riddance of CIP from wastewater.

Coupled sorptive and oxidative antimony(III) removal by iron-modified biochar: Mechanisms of electron-donating capacity and reactive Fe species

Sorption and oxidation are two potential pathways for the decontamination of trivalent antimony (Sb(III))-bearing water, using iron (Fe)-modified biochar (FeBC). Here we investigated the sorption and oxidation behavior of FeBC for Sb(III) in aqueous solutions. Results revealed that Sb(III) removal by FeBC was significantly improved showing the maximum Sb(III) sorption (64.0 mg g-1). Density functional theory (DFT) calculations indicated that magnetite (Fe3O4) in FeBC offered a sorption energy of -0.22 eV, which is 5 times that of non-modified biochar. With the addition of peroxymonosulfate (PMS), the sorption of Sb(III) on FeBC was 7 times higher than that on BC, indicating the sorption capacity of FeBC for Sb(III) could be substantially increased by adding oxidizing agents. Electrochemical analysis showed that Fe modification imparted FeBC higher electron-donating capacity than that of BC (0.045 v. s. 0.023 mmol e- (g biochar)-1), which might be the reason for the strong Sb(III) oxidation (63.6%) on the surface of FeBC. This study provides new information that is key for the development of effective biochar-based composite materials for the removal of Sb(III) from drinking water and wastewater. The findings from this study have important implications for protecting human health and agriculture.

Occurrence, toxicity, impact and removal of selected non-steroidal anti-inflammatory drugs (NSAIDs): A review

Non-steroidal anti-inflammatory drugs (NSAIDs) are among the most frequently used pharmaceuticals for human therapy, pet therapeutics, and veterinary feeds, enabling them to enter into water sources such as wastewater, soil and sediment, and seawater. The control of NSAIDs has led to the advent of the novel materials for treatment techniques. Herein, we review the occurrence, impact and toxicity of NSAIDs against aquatic microorganisms, plants and humans. Typical NSAIDs, e.g., ibuprofen, ketoprofen, diclofenac, naproxen and aspirin were detected at high concentrations in wastewater up to 2,747,000 ng L-1. NSAIDs in water could cause genotoxicity, endocrine disruption, locomotive disorders, body deformations, organs damage, and photosynthetic corruption. Considering treatment methods, among adsorbents for removal of NSAIDs from water, metal-organic frameworks (10.7-638 mg g-1) and advanced porous carbons (7.4-400 mg g-1) were the most robust. Therefore, these carbon-based adsorbents showed promise in efficiency for the treatment of NSAIDs.

Overview of environmental and economic viability of activated carbons derived from waste biomass for adsorptive water treatment applications

In adsorptive water treatment applications, the exploration of waste-derived activated carbon (AC) has gained substantial attention in scientific research. The use of waste materials as precursors for AC has gained attention due to its economic viability and potential to reduce the consumption of non-renewable resources. However, there is a lack of comprehensive literature regarding the costs and environmental impacts associated with the waste-based AC production and application. As sustainability practices gain importance, there has been an increase in research dedicated to estimating costs and conducting life cycle assessment (LCA) of AC production from waste sources. However, there is a need for thorough literature reviews that cover various methodologies and conclusions. The primary objective of this study is to provide a comprehensive overview and analysis of the economic and environmental factors related to the use of waste-derived AC in water treatment. LCA studies indicate that utilizing waste materials for AC production can lead to significant resource and energy savings compared to conventional methods relying on fossil resources. The cost of AC is influenced by factors such as precursor material cost, energy requirements during production (optimizable on an industrial scale), and properties of the resulting material. Additionally, the review emphasizes the significance of waste-based AC regeneration for sustainable viability. Evaluating the environmental and economic costs is crucial to support sustainability claims and avoid unsupported assertions. Overall, this study contributes to understanding the potential of waste-derived AC in water treatment and highlights the need for further research in this area.

Removal ibuprofen from aqueous solution by a noval Al-modified biochar

With the increase of organic emissions in production and human life, the pollution control of organic is now an urgent problem in the environmental field. In this study, hydrothermal carbonization rice husk-loaded Al-modified biochar (Al-BC) was synthesized, and the results of scanning electron microscopy could be used to determine that Al oxide composite was loaded on the surface of the material. The specific surface area was 57.049 m2 g-1, pore volume was 0.254 cm3 g-1, and average pore diameter was 8.922 nm for BC and 109.617 m2 g-1, 0.215 cm3 g-1, and 3.969 nm for Al-BC, respectively. The control effects of these two adsorption materials on organic pollutant ibuprofen (IBU) under different pH conditions were also investigated. The research results show that the adsorption capacity of Al-BC (30.24-1.48 mg g-1) is better than BC (19.98-0.92 mg g-1) at pH from 2 to 11. Solution pH plays a crucial role in IBU adsorption from organic solution. The Langmuir fitting results show that at pH = 7, the saturated adsorption capacity of IBU on BC could reach up to 18.68 mg g-1; the adsorption capacity on Al-BC was 60.49 mg g-1. The thermodynamic parameters indicate that the adsorption is spontaneous, endothermic, and increased disorder. The adsorption material prepared in this study could provide a reference for organic pollution control in water.

The use of agro-waste-based adsorbents as sustainable, renewable, and low-cost alternatives for the removal of ibuprofen and carbamazepine from water

The occurrence of residual pharmaceuticals in the aquatic environment poses major toxicological impacts and adds to the increasing pressure on water resources. Many countries are already suffering from water scarcity, and with the burdening costs of water and wastewater treatment, the race towards innovative sustainable strategies for pharmaceutical remediation is ongoing. Out of the available treatment methods, adsorption proved to be a promising, environmentally friendly technique, particularly when efficient waste-based adsorbents are produced from agricultural residues, thus maximizing the value of wastes, minimizing production costs, and saving natural resources from depletion. Among the residual pharmaceuticals, ibuprofen and carbamazepine are heavily consumed and highly occurring in the environment. This paper aims to review the most recent literature on the application of agro-waste-based adsorbents as sustainable alternatives for the removal of ibuprofen and carbamazepine from contaminated waters. Highlights on the major mechanisms implicated in the adsorption of ibuprofen and carbamazepine are presented, and light is shed on multiple operational parameters that hold a key role in the adsorption process. This review also highlights the effects of different production parameters on adsorption efficiency and discusses many limitations currently encountered. Finally, an analysis is included to compare the efficiency of agro-waste-based adsorbents relative to other green and synthetic adsorbents.

Adsorption of the non-steroidal anti-inflammatory drug (ibuprofen) onto biochar and magnetic biochar prepared from chrysanthemum waste of the beverage industry

Biochar and magnetic biochar prepared from chrysanthemum waste of the beverage industry are effective adsorbents for the removal of the non-steroidal anti-inflammatory drug, ibuprofen (IBP), from aqueous systems. The development of magnetic biochar using iron chloride, overcame poor separation characteristics from the liquid phase of the powdered biochar after adsorption. Characterisation of biochars was achieved through Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), N₂ adsorption/desorption porosimetry, scanning electron microscopy (SEM), electron dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), moisture and ash content, bulk density, pH and zero-point charge (pH_pzc). The specific surface area of non-magnetic and magnetic biochars was 220 and 194 m² g^-1, respectively. Adsorption of ibuprofen was optimised with respect to contact time (5-180 min), solution pH (2-12) and initial drug concentration (5-100 mg L^-1), with equilibrium being reached in 1 hour, and the maximum ibuprofen removal occurred at pH 2 and 4 for biochar and magnetic biochars, respectively. Investigation of the adsorption kinetics was achieved through application of the pseudo-first order, pseudo-second order, Elovich and intra-particle diffusion models. Adsorption equilibrium was evaluated using Langmuir, Freundlich and Langmuir-Freundlich isotherm models. The adsorption kinetics and isotherms for both biochars are well described by pseudo-second order kinetic and Langmuir-Freundlich isotherm models, respectively, with the maximum adsorption capacity of biochar and magnetic biochar being 167 and 140 mg g^-1, respectively. Chrysanthemum derived non-magnetic and magnetic biochars exhibited significant potential as sustainable adsorbents toward the removal of emerging pharmaceutical pollutants such as ibuprofen from aqueous solution.

Insight into the adsorptive removal of ibuprofen using porous carbonaceous materials: A review

Over the last decade, the removal of pharmaceuticals from aquatic bodies has garnered substantial attention from the scientific community. Ibuprofen (IBP), a non-steroidal anti-inflammatory drug, is released into the environment in pharmaceutical waste as well as medical, hospital, and household effluents. Adsorption technology is a highly efficient approach to reduce the IBP in the aquatic environment, particularly at low IBP concentrations. Due to the exceptional surface properties of carbonaceous materials, they are considered ideal adsorbents for the IBP removal of, with high binding capacity. Given the importance of the topic, the adsorptive removal of IBP from effluent using various carbonaceous adsorbents, including activated carbon, biochar, graphene-based materials, and carbon nanostructures, has been compiled and critically reviewed. Furthermore, the adsorption behavior, binding mechanisms, the most effective parameters, thermodynamics, and regeneration methods as well as the cost analysis were comprehensively reviewed for modified and unmodified carbonaceous adsorbents. The compiled studies on the IBP adsorption shows that the IBP uptake of some carbon-based adsorbents is significantly than that of commercial activated carbons. In the future, much attention is needed for practical utilization and upscaling of the research findings to aid the management and sustainability of water resource.

Thermally modified bamboo-eggshell adsorbent for phosphate recovery and its sustainable application as fertilizer

Phosphate recovery from wastewater using readily available biowaste-based adsorbents is beneficial for both eutrophication control and waste management. Bamboo char has a high-density porous structure and eggshell contains CaCO₃ with high affinity for phosphate. The combination of calcined bamboo and eggshell is a potential adsorbent for P recovery that has not been tested previously. Because bamboo char and eggshell both are popular for soil amendment, a P-loaded bamboo and eggshell composite is a promising fertilizer for long-term soil improvement. In this work, the feasibility of calcined bamboo and eggshell (BE) for P recovery and its use as fertilizer were investigated. The adsorption capacity and mechanism were examined using adsorption kinetic, isotherm, and thermodynamic analysis. The kinetic study showed that the experimental data sets were fitted best by a pseudo second-order model, indicating chemisorption. The Langmuir isotherm model estimated maximum adsorption capacities of 95.14 and 98.40 mg/g for BE 1:1 and 2:1 adsorbent. Monolayer adsorption occurred on a homogenous surface. The adsorption reaction was non-spontaneous at 298 K and exothermic for the BE 1:1 and 2:1 adsorbent, and the calculated Langmuir separation factor indicated favorable conditions for P adsorption. The desorption study showed lower P desorption capacity in water than in neutral ammonium citrate. P-loaded eggshell-modified bamboo char was an effective slow-release fertilizer for Japanese mustard spinach cultivation, which is a sustainable and environment friendly use of P-loaded materials.

Phosphoric acid-activated biochar derived from sunflower seed husk: Selective antibiotic adsorption behavior and mechanism

In recent years, the unnecessary overuse of antibiotics has increased globally, resulting in antibiotic contamination of water, which has become a significant environmental concern. This study aims to examine the adsorption behavior of antibiotics (Tetracycline TC, Ciprofloxacin CIP, Ibuprofen IBP, and Sulfamethoxazole SMX) onto H₃PO₄-activated sunflower seed husk biochar (PSF). The results demonstrated that H₃PO₄ could enhance the specific surface area (378.8 m²/g) and create a mesoporous structure of biochar. The adsorption mechanism was investigated using kinetic models, isotherms, and thermodynamics. The maximum adsorption capacities (q_max) of TC, CIP, SMX, and IBP are 429.3, 361.6, 251.3, and 251.1 mg g^-1, respectively. The adsorption mechanism of antibiotics on PSF was governed by complex mechanisms, including chemisorption, external diffusion, and intraparticle diffusion. This research provides an environmentally friendly method for utilizing one of the agricultural wastes for the removal of a variety of antibiotics from the aquatic environment.

Biochar-mediated removal of pharmaceutical compounds from aqueous matrices via adsorption

Pharmaceutical is one of the noteworthy classes of emerging contaminants. These biologically active compounds pose a range of deleterious impacts on human health and the environment. This is attributed to their refractory behavior, poor biodegradability, and pseudopersistent nature. Their large-scale production by pharmaceutical industries and subsequent widespread utilization in hospitals, community health centers, and veterinary facilities, among others, have significantly increased the occurrence of pharmaceutical residues in various environmental compartments. Several technologies are currently being evaluated to eliminate pharmaceutical compounds (PCs) from aqueous environments. Among them, adsorption appears as the most viable treatment option because of its operational simplicity and low cost. Intensive research and development efforts are, therefore, currently underway to develop inexpensive adsorbents for the effective abatement of PCs. Although numerous adsorbents have been investigated for the removal of PCs in recent years, biochar-based adsorbents have garnered tremendous scientific attention to eliminate PCs from aqueous matrices because of their decent specific surface area, tunable surface chemistry, scalable production, and environmentally benign nature. This review, therefore, attempts to provide an overview of the latest progress in the application of biochar for the removal of PCs from wastewater. Additionally, the fundamental knowledge gaps in the domain knowledge are identified and novel strategic research guidelines are laid out to make further advances in this promising approach towards sustainable development.

Transition metal-doped SnO2 and graphene oxide (GO) supported nanocomposites as efficient photocatalysts and antibacterial agents

In the present work, pristine and transition metal (TM) (W, Ag, Zn)-doped SnO₂ nanocrystals using a facile sol-gel approach were synthesized. The grown products were anchored on graphene oxide (GO) sheets via a simple ultrasonication technique to fabricate binary nanocomposites. The structural, optical, and morphological properties of as-synthesized samples were studied by XRD, FTIR, Raman, EDX, UV-Visible, PL, and FE-SEM. The charge transferability of graphene oxide-based samples was investigated by EIS. The XRD exhibited the TM doping in SnO₂ and the development of GO-based nanocomposite. FTIR data evidenced the existence of the metal-oxygen bonds. Raman spectra presented the optical phonon modes of SnO₂ and the existence of oxygen vacancy defects. FE-SEM images demonstrated the anchoring of particles on the GO sheet, and EDX further approved the existence of desired dopants. The integration of SnO₂ with TM doping remarkably reduced optical bandgap (3.65-3.10 eV), which was further decreased (3.10-2.99 eV) by making composite with GO. The photodegradation results exhibited that GO-based nanocomposites have the higher potential to degrade synthetic dyes (methyl red (MR), and methyl orange (MO) and SnZnO₂/GO have shown superb photocatalytic performance after 80-min sunlight illumination (99.9% MR and 95.0% MO dyes) with the higher rate constant and superior stability up to 6th cycle against MR dye. The grown samples were tested for bacterial disinfection, and SnZnO₂/GO sample showed a higher zone of inhibition towards S. aureus and K. pneumoniae bacteria strains. The greater charge transfer rate and lower recombination of charge carriers in GO-based composites were also observed by EIS and PL analysis. Moreover, the present article ascribed that the photocatalytic and antibacterial properties of bare SnO₂ could be improved by TM doping and fabricating their composite with GO.

Facile Synthesis and Life Cycle Assessment of Highly Active Magnetic Sorbent Composite Derived from Mixed Plastic and Biomass Waste for Water Remediation

Plastic and biomass waste pose a serious environmental risk; thus, herein, we mixed biomass waste with plastic bottle waste (PET) to produce char composite materials for producing a magnetic char composite for better separation when used in water treatment applications. This study also calculated the life cycle environmental impacts of the preparation of adsorbent material for 11 different indicator categories. For 1 functional unit (1 kg of pomace leaves as feedstock), abiotic depletion of fossil fuels and global warming potential were quantified as 7.17 MJ and 0.63 kg CO₂ equiv for production of magnetic char composite materials. The magnetic char composite material (MPBC) was then used to remove crystal violet dye from its aqueous solution under various operational parameters. The kinetics and isotherm statistical theories showed that the sorption of CV dye onto MPBC was governed by pseudo-second-order, and Langmuir models, respectively. The quantitative assessment of sorption capacity clarifies that the produced MPBC exhibited an admirable ability of 256.41 mg g^-1. Meanwhile, the recyclability of 92.4% of MPBC was demonstrated after 5 adsorption/desorption cycles. Findings from this study will inspire more sustainable and cost-effective production of magnetic sorbents, including those derived from combined plastic and biomass waste streams.

A Review of the Modeling of Adsorption of Organic and Inorganic Pollutants from Water Using Artificial Neural Networks

The application of artificial neural networks on adsorption modeling has significantly increased during the last decades. These artificial intelligence models have been utilized to correlate and predict kinetics, isotherms, and breakthrough curves of a wide spectrum of adsorbents and adsorbates in the context of water purification. Artificial neural networks allow to overcome some drawbacks of traditional adsorption models especially in terms of providing better predictions at different operating conditions. However, these surrogate models have been applied mainly in adsorption systems with only one pollutant thus indicating the importance of extending their application for the prediction and simulation of adsorption systems with several adsorbates (i.e., multicomponent adsorption). This review analyzes and describes the data modeling of adsorption of organic and inorganic pollutants from water with artificial neural networks. The main developments and contributions on this topic have been discussed considering the results of a detailed search and interpretation of more than 250 papers published on Web of Science ® database. Therefore, a general overview of the training methods, input and output data, and numerical performance of artificial neural networks and related models utilized for adsorption data simulation is provided in this document. Some remarks for the reliable application and implementation of artificial neural networks on the adsorption modeling are also discussed. Overall, the studies on adsorption modeling with artificial neural networks have focused mainly on the analysis of batch processes (87%) in comparison to dynamic systems (13%) like packed bed columns. Multicomponent adsorption has not been extensively analyzed with artificial neural network models where this literature review indicated that 87% of references published on this topic covered adsorption systems with only one adsorbate. Results reported in several studies indicated that this artificial intelligence tool has a significant potential to develop reliable models for multicomponent adsorption systems where antagonistic, synergistic, and noninteraction adsorption behaviors can occur simultaneously. The development of reliable artificial neural networks for the modeling of multicomponent adsorption in batch and dynamic systems is fundamental to improve the process engineering in water treatment and purification.

Strategic management of nitrate pollution from contaminated water using viable adsorbents: An economic assessment-based review with possible policy suggestions

Groundwater contaminated with nitrate has prompted a flurry of research studies around the world in the recent years to address this burning environmental issue. The common presence of nitrates in groundwater, wastewater, and surface waters has thrown an enormously critical challenge to the global research communities to provide safe and clean drinking water to municipalities. As per WHO, the maximum permissible limit of nitrate in drinking water is 10 mg/L and in groundwater is 50 mg/L; exceeding the limits, several human health problems are observed. Adsorption, ion-exchange processes, membrane-based approaches, electrochemical and chemical procedures, biological methods, filtration, nanoparticles, etc. have been well investigated and reviewed to reduce nitrate levels in water samples in the recent years. Process conditions, as well as the efficacy of various approaches, were discovered to influence different techniques for nitrate mitigation. But, because of low cost, simple operation, easy handling, and high removal effectiveness, adsorption has been found to be the most suitable and efficient approach. The main objectives of this review primarily focuses on the creation of a naturally abundant, cost-effective innovative abundant material, such as activated clay particles combined with iron oxide. Oxide-clay nanocomposite materials, effectively remove nitrate with higher removal efficiency along with recovery of nitrate concentrated sludge. Such methods stand out as flexible and economic ways for capturing stabilized nitrate in solid matrices to satisfy long-term operations. A techno-economic assessment along with suitable policy suggestions have been reported to justify the viability of the brighter processes. Indeed, this kind of analytical review appears ideal for municipal community recommendations on abatement of excess nitrate to supply of clean water.

Potential hazards of biochar: The negative environmental impacts of biochar applications

Biochar has been widely used as an environmentally friendly material for soil improvement and remediation, water pollution control, greenhouse gas emission reduction, and other purposes because of its characteristics such as a large surface area, porous structure, and abundant surface O-containing functional groups. However, some surface properties (i.e., (i) some surface properties (i.e., organic functional groups and inorganic components), (ii) changes in pH), and (iii) chemical reactions (e.g., aromatic C ring oxidation) that occur between biochar and the application environment may result in the release of harmful components. In this study, biochars with a potential risk to the environment were classified according to their harmful components, surface properties, structure, and particle size, and the potential negative environmental effects of these biochars and the mechanisms inducing these negative effects were reviewed. This article presents a comprehensive overview of the negative environmental impacts of biochar on soil, water, and atmospheric environments. It also summarizes various technical methods of environment-related risk detection and evaluation of biochar application, thereby providing a baseline reference and guiding significance for future biochar selection and toxicity detection, evaluation, and avoidance.

Sunlight-induced photocatalytic degradation of various dyes and bacterial inactivation using CuO-MgO-ZnO nanocomposite

Novel tri-phase CuO-MgO-ZnO nanocomposite was prepared using the co-precipitation technique and investigated its physical properties using characterization techniques including XRD, FTIR, Raman, IV, UV-vis, PL, and SEM. The application of grown CuO-MgO-ZnO nanocomposite for the degradation of various dyes under sunlight and antibacterial activity against different bacteria were studied. The XRD confirmed the existence of diffraction peaks related to CuO (monoclinic), MgO (cubic), and ZnO (hexagonal) with CuO phase 40%, MgO 24%, and ZnO 36%. The optical energy gap of nanocomposite was 2.9 eV, which made it an efficient catalyst under sunlight. Raman and FTIR spectra have further confirmed the formation of the nanocomposite. SEM images revealed agglomerated rod-shaped morphology. EDX results showed the atomic percentage of a constituent element in this order Cu>Zn>Mg. PL results demonstrate the presence of intrinsic defects. The photocatalytic activity against methylene blue (MB), methyl orange (MO), rhodamine-B (RhB), cresol red (CR), and P-nitroaniline (P-Nitro) dyes has shown the excellent degradation efficiencies 88.5%, 93.5%, 75.9%, 98.8%, and 98.6% at 5 ppm dye concentration and 82.6%, 83.6%, 64.3%, 93.1%, and 94.3% at 10 ppm dye concentration in 100 min, respectively, under sunlight illumination. The higher degradation is due to the generation of superoxide and hydroxyl radicals. The recyclability test showed the reusability of catalyst up to the 5th cycle. The antibacterial activity against Escherichia coli, Klebsiella pneumoniae, Proteus Vulgaris, Staphylococcus aureus, and Pseudomonas aeruginosa bacteria with the zone of inhibition 30, 31, 30, 30, and 30 mm, respectively, was achieved.

Removal of ibuprofen from aqueous media by adsorption: A comprehensive review

Ibuprofen (IBP) is a non-steroidal anti-inflammatory drug released into the environment through hospital and medical effluents, pharmaceutical wastewater and veterinary use. The aim of this paper is to review the empirical findings on the adsorption of IBP from aqueous media. A preliminary ecotoxicological assessment confirmed the environmental risk of IBP in the aqueous environment. Open literature works considered in this review were for the past decade (2010-2020). Carbon-based adsorbents are the best class of adsorbent for the uptake of IBP and the highest reported maximum adsorption capacity (q_max) for IBP is 496.1 mg/g by SWCNTs. The range of adsorption capacities for IBP uptake in this review is between 0.0496 and 496.1 mg/g. The mechanism of uptake is majorly by hydrophobic interactions, π - π stacking, hydrogen bonds, electrostatic interactions and dipole-dipole interaction. IBP uptake was best fit to a wide variety of isotherm models but was well suited to the pseudo-second order kinetics model. The thermodynamics of IBP uptake depends majorly on the nature of the adsorbent and desorption from the solid phase is based on an appropriate choice of the eluent. Knowledge gaps were observed in used adsorbent disposal and process improvement. In the future, interest would increase in scale-up, industrial applications and practical utilisation of the research findings which would help in sustainable water resource management.

Husk of Agarwood Fruit-Based Hydrogel Beads for Adsorption of Cationic and Anionic Dyes in Aqueous Solutions

Hydrogel beads based on the husk of agarwood fruit (HAF)/sodium alginate (SA), and based on the HAF/chitosan (CS) were developed for the removal of the dyes, crystal violet (CV) and reactive blue 4 (RB4), in aqueous solutions, respectively. The effects of the initial pH (2–10) of the dye solution, the adsorbent dosage (0.5–3.5 g/L), and contact time (0–540 min) were investigated in a batch system. The dynamic adsorption behavior of CV and RB4 can be represented well by the pseudo-second-order model and pseudo-first-order model, respectively. In addition, the adsorption isotherm data can be explained by the Langmuir isotherm model. Both hydrogel beads have acceptable adsorption selectivity and reusability for the study of selective adsorption and regeneration. Based on the effectiveness, selectivity, and reusability of these hydrogel beads, they can be treated as potential adsorbents for the removal of dyes in aqueous solutions.

Single and competitive adsorptions of micropollutants using pristine and alkali-modified biochars from spent coffee grounds

This study investigated the single and competitive adsorption characteristics of micropollutants using the pristine and alkali-modified spent coffee grounds (SCG) biochars. The alkali modification substantially improved the physicochemical characteristics of the SCG biochars (specific surface area and pore volume), which may have led to differences in the adsorption behaviors of the micropollutants. The pseudo second order model (R² ≥ 0.990) better described the single and competitive adsorption kinetics than the pseudo first order model (R² ≥ 0.664). It is evident that chemisorption played a key role in the removal of the micropollutants by the pristine and alkali-modified SCG biochars. The single and competitive adsorptions of the micropollutants were highly dependent on the solution pH and ionic strength since the pore-filling effects, electrostatic and hydrophobic interactions governed their removal by the pristine and alkali-modified SCG biochars. The higher removal efficiencies of the micropollutants by the alkali-modified SCG biochars (≥ 44.5%) in the presence of dissolved organic matter compared to the pristine SCG biochars (≤ 18.5%) support the assumption that alkali modification could markedly reinforce the surface structural properties of the SCG biochars related to the adsorption capacities.

A critical review on the biochar production techniques, characterization, stability and applications for circular bioeconomy

•

Recent research on remediation of toxic pollutants by biochar has been summarized.

•

The production techniques of the biochar have been narrated.

•

Biochar properties, stability and its environmental issues have been analysed.

•

Applications of biochar in soil fertility and removing pollutants have been reported.

•

The major stumbling block in biochar production is cost of production.

There is an upsurge enthusiasm for utilizing biochar produced from waste-biomass in different fields, to address the most important ecological issues. This review is focused on an overview of remediating harmful contaminants utilizing biochar. Production of biochar utilizing various systems has been discussed. Biochar has received the consideration of numerous analysts in building up their proficiency to remediate contaminants. Process parameters are fundamentally answerable for deciding the yield of biomass. Biochar derived from biomass is an exceptionally rich wellspring of carbon produced from biomass utilizing thermal combustion. Activating biochar is another particular region for the growing utilization of biochar for expelling specific contaminations. Closed-loop systems to produce biochar creates more opportunities. Decentralized biochar production techniques serve as an effective way of providing employment opportunities, managing wastes, increasing resource proficiency in circular bioeconomy. This paper also covers knowledge gaps and perspectives in the field of remediation of toxic pollutants using biochar.

Assessment of potato peel and agro-forestry biochars supplementation on in vitro ruminal fermentation

Background

The awareness of environmental and socio-economic impacts caused by greenhouse gas emissions from the livestock sector leverages the adoption of strategies to counteract it. Feed supplements can play an important role in the reduction of the main greenhouse gas produced by ruminants—methane (CH₄). In this context, this study aims to assess the effect of two biochar sources and inclusion levels on rumen fermentation parameters in vitro.

Methods

Two sources of biochar (agro-forestry residues, AFB, and potato peel, PPB) were added at two levels (5 and 10%, dry matter (DM) basis) to two basal substrates (haylage and corn silage) and incubated 24-h with rumen inocula to assess the effects on CH₄ production and main rumen fermentation parameters in vitro.

Results

AFB and PPB were obtained at different carbonization conditions resulting in different apparent surface areas, ash content, pH at the point of zero charge (pHpzc), and elemental analysis. Relative to control (0% biochar), biochar supplementation kept unaffected total gas production and yield (mL and mL/g DM, p = 0.140 and p = 0.240, respectively) and fermentation pH (p = 0.666), increased CH₄production and yield (mL and mL/g DM, respectively, p = 0.001) and ammonia-N (NH₃-N, p = 0.040), and decreased total volatile fatty acids (VFA) production (p < 0.001) and H₂ generated and consumed (p ≤ 0.001). Biochar sources and inclusion levels had no negative effect on most of the fermentation parameters and efficiency. Acetic:propionic acid ratio (p = 0.048) and H₂ consumed (p = 0.019) were lower with AFB inclusion when compared to PPB. Biochar inclusion at 10% reduced H₂ consumed (p < 0.001) and tended to reduce total gas production (p = 0.055). Total VFA production (p = 0.019), acetic acid proportion (p = 0.011) and H₂ generated (p = 0.048) were the lowest with AFB supplemented at 10%, no differences being observed among the other treatments. The basal substrate affected most fermentation parameters independently of biochar source and level used.

Discussion

Biochar supplementation increased NH₃-N content, iso-butyric, iso-valeric and valeric acid proportions, and decreased VFA production suggesting a reduced energy supply for microbial growth, higher proteolysis and deamination of substrate N, and a decrease of NH₃-N incorporation into microbial protein. No interaction was found between substrate and biochar source or level on any of the parameters measured. Although AFB and PPB had different textural and compositional characteristics, their effects on the rumen fermentation parameters were similar, the only observed effects being due to AFB included at 10%. Biochar supplementation promoted CH₄ production regardless of the source and inclusion level, suggesting that there may be other effects beyond biomass and temperature of production of biochar, highlighting the need to consider other characteristics to better identify the mechanism by which biochar may influence CH₄ production.

Methanol-modified ultra-fine magnetic orange peel powder biochar as an effective adsorbent for removal of ibuprofen and sulfamethoxazole from water

The efficient capture of drug metabolites from aquatic environments has been recognized as an essential task for environmental protection. A methanol-modified ultra-fine magnetic biochar (CH3OH-OP-char/Fe3O4) was prepared from orange peel powder using ball milling, and its adsorption behaviors for ibuprofen and sulfamethoxazole were evaluated. The obtained materials were characterized by laser particle size analyzer, EA, ICP-OES, VSM, BET, TG-DTG, and FTIR. Furthermore, the experiments were conducted to study the vital operating parameters such as solution pH (2.0–11.0), contact time (0.5–240 min), initial drug concentration (0.5–100 mg/L), and temperatures (15–40°C) on the removal process. The results showed that the adsorption of IBP and sulfamethoxazole on CH3OH-OP-char/Fe3O4 was highly pH-dependent. Kinetic studies indicated that physisorption was the dominant adsorption mechanism, and film diffusion played a vital role in adsorption onto CH3OH-OP-char/Fe3O4. Equilibrium data were fitted well with the Langmuir isotherm model, implying monolayer adsorption. The adsorption process was spontaneous and endothermic due to the thermodynamic calculation, and high temperatures were favorable to the adsorption process.

The synergistic effect of ultrasound power and magnetite incorporation on the sorption/desorption behavior of Cr(VI) and As(V) oxoanions in an aqueous system

Though abundant studies have targeted the sorption of Cr(VI) and As(V) anions by organic polymers or magnetic metal oxides, there is no research literature on the sorption characteristics of Cr(VI) and As(V) by thiourea-formaldehyde resin (TF) and its magnetic derivative (MTF). TF resin is a strong chelating agent, which has several practical applications. This paper reports on the removal of Cr(VI) and As(V) oxoanions by TF and MTF sorbents. The sorbents were characterized by Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) spectroscopy, elemental analysis, zetametry, Brunauer-Emmett-Teller (BET) analysis, and differential light scattering (DLS). The synergistic influence of magnetite incorporation and ultrasonic power on sorption kinetics, isotherms, and oxoanion desorption were investigated, including the analysis of the uncertainty in the study results. The relationship between kinetic and equilibrium constants of the two sorbents under normal shaking and ultrasound shaking was analysed. Ultrasound power improved the mass transfer and makes the sorption ultra-fast while magnetite enhanced the sorption capacity. The MTF particles sorbed 4.28 and 1.97 mmol g^-1 of Cr(VI) and As(V), respectively, under optimum conditions. Further, desorption kinetics and efficiency of Cr(VI) and As(V) were estimated using normal shaking and ultrasonic agitation. Ultrasound power reduced the time and the concentration of NaCl required for the stabilization of desorption efficiency.

Optimization of activated palm oil sludge biochar preparation for sulphur dioxide adsorption

Palm oil sludge (POS) is an organic waste generated from the palm oil industry. POS causes environmental pollution if it is improperly disposed. In this study, the potential of activated POS biochar, as an adsorbent for the removal of SO₂ gas was tested. POS biochar was physically activated using CO₂ gas. The effects of activation preparation variables i.e. activation temperature (300-700 °C), activation time (30-150 min) and CO₂ flow rate (100-500 ml/min) were investigated using design expert version 8.0.7.1 software. Central Composite Design (CCD) was used to develop a quadratic model to correlate the operating variables with the activated biochar adsorption capacity. Analysis of variance (ANOVA) was performed to identify the significant factors on the experimental design response. The optimum preparation conditions of activated POS biochar were found to be at activation temperature of 442 °C, activation time of 63 min and CO₂ flow rate of 397 ml/min. The maximum adsorption capacity at the optimum conditions was recorded as 16.65 mg/g. The adsorption capacity increased significantly after the activation process. Characteristics of the activated POS biochar proposed that SO₂ was physically adsorbed. Furthermore, it was found that the adsorption capacity can be further enhanced by increasing the reaction temperature to 100 °C or with 15% of relative humidity in the inlet gas. The prepared adsorbents can be regenerated by thermal treatment.

The effect of solvent parameters on properties of iron-based silica binary aerogels as adsorbents

The magnetic Fe₃O₄-SiO₂ binary aerogel and nonmagnetic α-Fe₂O₃-SiO₂ binary aerogels are obtained by adjusting the solvent type during the solvothermal reaction and varying the Fe/Si proportion in the sol-gel process. The microstructure, surface charge and the formation mechanism of iron-based silica binary aerogels are analyzed by SEM, zeta potential and BET. The influence of the Fe/Si proportion on the surface group and morphology of binary aerogels is also investigated by FTIR and TEM analysis. The adsorption behavior of the iron-based silica binary aerogels on the Congo Red (CR) dye is also discussed by adsorption kinetics model and adsorption isotherm model. In addition, the effects of pH and initial concentration of the solutions, adsorption time and the maximum adsorption capacities for CR of iron-based silica binary aerogels adsorbents are also discussed, respectively. Moreover, the maximum adsorption capacity of as-prepared magnetic Fe₃O₄-SiO₂ binary aerogels for dyes achieved 489.13 mg g^-1, the maximum adsorption capacity of nonmagnetic α-Fe₂O₃-SiO₂ reached 454.55 mg g^-1, respectively. Thus, the iron-based silica binary aerogels provides valuable clues for the study of other aerogel materials as adsorbents.

Comprehensive analysis on sorptive uptake of enrofloxacin by activated carbon derived from industrial paper sludge

The current investigation deals with how chemically activated carbon derived from industrial paper sludge (ACPS) performs on sorptive removal of enrofloxacin (ENF), an antibacterial drug from its water solution. Thermogravimetric (TGA) and proximate analysis of raw paper sludge (RPS) were conducted. ACPS was characterized with proximate analysis, XRD, FT-IR, SEM and BET. The influence of five operational parameters viz. adsorbate concentration (initial), dose of adsorbent, pH, temperature, and contact time on the adsorption of ENF onto ACPS has been conducted using batch experiments. The process of adsorption was optimized through ANN (artificial neural network) in addition to RSM (response surface methodology). The maximum percentage removal (95.85%) was achieved at initial ENF concentration 12 mg/g, adsorbent dose 1.2 g/L, contact duration of 18 h and temperature 20 °C. Kinetic data were best fitted into pseudo-second order kinetic model and adsorption equilibrium study indicates that the adsorption process follows Langmuir isotherm model. Adsorption capacity was noted to have a highest value of 44.44 mg/g. A study on thermodynamics of the adsorption process suggests that it exhibits spontaneity, being essentially exothermic. Cost analysis and reusability study confirm that adsorbent produced from industrial paper sludge is cost-effective and reusable. Therefore, ACPS as adsorbent has potency for removing ENF from aqueous solution.

Synthesis of biochar from chili seeds and its application to remove ibuprofen from water. Equilibrium and 3D modeling

In this work chili seeds (Capsicum annuum) were used as raw material in the synthesis of biochar at temperatures between 400 and 600 °C. The samples were chemically, texturally and morphologically characterized and their properties were correlated with the calcination temperature. The adsorption mechanism of IBP was elucidated by analyzing the effect of solution pH, ionic strength and temperature, whereas that, the intraparticle diffusion mechanism was clarified through the application of a 3D diffusional model. The results evidenced that raising the pyrolysis temperature promotes a greater content of disordered graphitic carbon (51.6-85.02%) with small surface area (0.52-0.18 m²/g) and low quantity of functional groups. The adsorption study demonstrated that the biochar synthesized at 600 °C (C600) enhances the adsorption capacity >50 folds compared with chili seeds. Moreover, at pH = 7 the adsorption mechanism is governed by π-acceptor and attractive electrostatic interactions, whereas at basic pH the main adsorption mechanism is π-acceptor. Additionally, hydrophobic interactions become important by increasing the presence of NaCl. The application of 3D diffusional model based on surface diffusion interpreted clearly the kinetic curves obtaining values of D_s ranging from 2.31 × 10^-8-2.51 × 10^-8 cm² s^-1. Besides, it was determined that intraparticle mass flux is larger along the shortest axis of the seed, and always directed toward the particle center. The maximum mass flux takes place in the center of particle, and it advances like a moving front as time was increased.

Thermal conversion of a promising phytoremediation plant (Symphytum officinale L.) into biochar: Dynamic of potentially toxic elements and environmental acceptability assessment of the biochar

Symphytum officinale L., as a hyperaccumulator, was pyrolyzed into biochar at 350, 550, and 750 °C, respectively. PTEs could be enriched in biochars except Cd volatilized greatly at 750 °C. In order to evaluate the environmental acceptability of biochars, a series of sequential and single extractions and biochar oxidation procedures were performed for simulating different environmental conditions. There was a sharp decline in PTEs release under various conditions when the temperature above 550 °C, indicating PTEs might transform into more stable forms at higher temperature. Thus, increasing the pyrolysis temperature is helpful for reducing biochar phytotoxicity, suppressing biochar leaching and improving biochar environmental safety. Moreover, the economic feasibility analysis of the biochar confirmed the practicability of it. Findings from this work illustrated that biochars pyrolyzed from Symphytum officinale L. at the temperature higher than 550 °C might be environmental acceptable, which is beneficial for biochar application.

A Review on the Synthesis and Characterization of Biomass-Derived Carbons for Adsorption of Emerging Contaminants from Water

This review analyzes the preparation and characterization of biomass-derived carbons and their application as adsorbents of emerging contaminants from water. The study begins by identifying the different types of emerging contaminants more often found in water streams, including a brief reference to the available technologies for their removal. It also describes the biomass sources that could be used for the synthesis of biochars and activated carbons (AC). The characterization of the adsorbents and the different approaches that can be followed to learn about the adsorption processes are also detailed. Finally, the work reviews literature studies focused on the adsorption of emerging contaminants on biochars and activated carbons synthesized from biomass precursors.

Recovery of phosphate and dissolved organic matter from aqueous solution using a novel CaO-MgO hybrid carbon composite and its feasibility in phosphorus recycling

Metal oxide-Carbon composites have been developed tailoring towards specific functionalities for removing pollutants from contaminated environmental systems. In this study, we synthesized a novel CaO-MgO hybrid carbon composite for removal of phosphate and humate by co-pyrolysis of dolomite and sawdust at various temperatures. Increasing of pyrolysis temperature to 900 °C generated a composite rich in carbon, CaO and MgO particles. Phosphate and humate can be removed efficiently by the synthesized composite with the initial solution in the range of pH 3.0-11.0. The phosphate adsorption was best fitted by pseudo-second-order kinetic model, while the humate adsorption followed the pseudo-second-order and the intra-particle diffusion kinetic models. The maximum adsorption capabilities quantified by the Langmuir isotherm model were up to 207 mg phosphorus (or 621 mg phosphate) and 469 mg humate per one-gram composite used, respectively. Characterization of composites after adsorption revealed the contributions of phosphate crystal deposition and electrostatic attraction on the phosphate uptake and involvement of π - π interaction in the humate adsorption. The prepared composite has great potential for recovering phosphorus from wastewater, and the phosphate sorbed composite can be employed as a promising phosphorus slow-releasing fertilizer for improving plant growth.

Comparative study on the synthesis of magnetic ferrite adsorbent for the removal of Cd(II) from wastewater

The magnetic ferrites were synthesized at ambient temperature through the precipitation method in aqueous solution at varying pH values and were used as novel adsorbents for heavy metal-containing wastewater treatment. The magnetic ferrites were applied for the removal of Cd(II) ion from wastewater. The synthesized magnetic ferrites were characterized by settling velocity, X-ray diffraction, scanning electron microscopy, laser particles size analyzer, and vibrating sample magnetometer. The effects of pH value and contact time on the adsorption process were investigated. The magnetic ferrites had a saturation magnetization value of 82.30 emu/g and a settling velocity of 2%, indicating easy separation from aqueous solution under magnetic field. The adsorption of Cd(II) onto the magnetic ferrites followed the pseudo-second-order kinetics and the Langmuir isotherm model. The most suitable pH condition for the synthesis of magnetic ferrite with optimal Cd(II) adsorption capacity was 9.0, and a maximum adsorption capacity of 160.91 mg/g for Cd(II) ions can be achieved. Based on the cost analysis, the magnetic ferrite was a cost-effective adsorbent for Cd-containing wastewater treatment.

Removal of pharmaceutical pollutants from synthetic wastewater using chemically modified biomass of green alga Scenedesmus obliquus

Pharmaceutical compounds are considered emerging environmental pollutants that have a potential harmful impact on environment and human health. In this study, the biomass of alga (Scenedesmus obliquus) was modified using alkaline solution, and used for the biosorption of tramadol (TRAM) and other pharmaceuticals. The adsorption kinetics and isotherms were investigated. The obtained results reveal high adsorption capacity of tramadol over modified algal biomass (MAB) after 45min with removal percentage of 91%. Pseudo-second order model was well fitted with the experimental data with correlation coefficient (0.999). Biosorption of tramadol on modified algal biomass proceeds with Freundlich isotherm model with correlation coefficient (0.942) that emphasized uptake of TRAM by MAB is driven by chemisorption. FTIR spectra of MAB before and after the adsorption were analyzed; some IR bands were detected with slight shift and low intensity suggesting their involving in adsorption. The tramadol biosorption by MAB is a chemical process as confirmed by Dubinin-Radushkevich. The adsorption of pharmaceutical over MAB is mainly preceded by hydrophilic interactions between amino and carbonyl groups in pharmaceutical molecules and hydroxyl and carbonyl functional groups on surface of biosorbent. It was emphasized by disappearance O-H and C-O from biomass IR spectra after adsorption. In matrix of pharmaceutical, the recorded adsorption capacities for CEFA, PARA, IBU, TRAM and CIP are 68, 58, 42, 42 and 39mg/g over MAB at natural pH and MAB dose of 0.5g/L. Furthermore, oxygen uptake by bacteria was applied for estimate the toxicity of pharmaceutical. The recorded result concluded the efficient reusability of modified algal biomass for biosorption of pharmaceuticals, as well only the adsorption efficiency decreased by 4.5% after three runs. Subsequently, the modified algal biomass is a promising reusable adsorbent for decontamination of wastewater from pharmaceuticals.

Environmental application of biochar: Current status and perspectives

In recent years, there has been a significant interest on biochar for various environmental applications, e.g., pollutants removal, carbon sequestration, and soil amelioration. Biochar has several unique properties, which makes it an efficient, cost-effective and environmentally-friendly material for diverse contaminants removal. The variability in physicochemical properties (e.g., surface area, microporosity, and pH) provides an avenue for biochar to maximize its efficacy to targeted applications. This review aims to highlight the vital role of surface architecture of biochar in different environmental applications. Particularly, it provides a critical review of current research updates related to the pollutants interaction with surface functional groups of biochars and the effect of the parameters variability on biochar attributes pertinent to specific pollutants removal, involved mechanisms, and competence for these removals. Moreover, future research directions of biochar research are also discussed.