Effects of magnesium ferrite biochar on the cadmium passivation in acidic soil and bioavailability for packoi (Brassica chinensis L.)

Coexistence of microplastics and heavy metals in soil: occurrence, transport, key interactions and effect on plants

Microplastics (MPs) pollution has raised serious environmental concerns due to its widespread generation and discharge across global ecosystems. It is estimated that approximately 400 million metric tons of plastic are produced annually, with 54% ending up as waste. The MPs account for a significant portion of this pollution. These MPs interact with heavy metals (HMs) in terrestrial ecosystems, such as cadmium (Cd), lead (Pb), and arsenic (As), which are introduced through various industrial activities at rates of thousands of tons per year. Such interactions may cause synergistic or antagonistic effects on plants. Recent studies suggest that MPs and HMs exposure impacts various physiological and biochemical pathways in plants, thereby increasing the toxicity symptoms. However, the existing scholarly understanding of the coupled effect of HMs and MPs on plants is limited, highlighting the need to explore these complex dynamics further. Through a comprehensive analysis of current research, this review underscores various pathways of MPs and HMs infiltration mechanisms, detailing their penetration, translocation, and bioaccumulation within plants. The physiological and biochemical effects of both pollutants on plants are deliberated individually and in combination. The review reveals that the co-existence of these contaminants results in a multifaceted environmental challenge, affecting overall plant growth, yield, and quality in ways that differ from individual exposure. Building on recent advancements, this article is expected to delineate the complex interactions between MPs, HMs, and plants and enhance the current understanding of the intricate interplay between them.

Biochar Blended with Alkaline Mineral Can Better Inhibit Lead and Cadmium Uptake and Promote the Growth of Vegetables

Three successive vegetable pot experiments were conducted to assess the effects on the long-term immobilization of heavy metals in soil and crop yield improvement after the addition of peanut shell biochar and an alkaline mineral to an acidic soil contaminated with lead and cadmium. Compared with the CK treatment, the change rates of biomass in the edible parts of the three types of vegetables treated with B0.3, B1, B3, B9, R0.2 and B1R0.2 were -15.43%~123.30%, 35.10%~269.09%, 40.77%~929.31%, -26.08%~711.99%, 44.14%~1067.12% and 53.09%~1139.06%, respectively. The cadmium contents in the edible parts of the three vegetables treated with these six additives reduced by 2.08%~13.21%, 9.56%~24.78%, 9.96%~35.61%, 41.96%~78.42%, -4.19%~57.07% and 12.43%~65.92%, respectively, while the lead contents in the edible parts reduced by -15.70%~59.47%, 6.55%~70.75%, 3.40%~80.10%, 55.26%~89.79%, 11.05%~70.15% and 50.35%~79.25%, respectively. Due to the increases in soil pH, soil cation-exchange capacity and soil organic carbon content, the accumulation of Cd and Pb in the vegetables was most notably reduced with a high dosage of 9% peanut shell biochar alone, followed by the addition of a low dosage of 1% peanut shell biochar blended with 0.2% alkaline mineral. Therefore, the addition of a low dosage of 1% peanut shell biochar blended with 0.2% alkaline mineral was the best additive in increasing the vegetable biomass, whereas the addition of 9% peanut shell biochar alone was the worst. Evidently, the addition of 0.2% alkaline mineral can significantly reduce the amount of peanut shell needed for passivating heavy metals in soil, while it also achieves the effect of increasing the vegetable yield.

Enhancing soil health to minimize cadmium accumulation in agro-products: the role of microorganisms, organic matter, and nutrients

Agro-products accumulate Cd from the soil and are the main source of Cd in humans. Their use must therefore be minimized using effective strategies. Large soil beds containing low-to-moderate Cd-contamination are used to produce agro-products in many developing countries to keep up with the demand of their large populations. Improving the health of Cd-contaminated soils could be a cost-effective method for minimizing Cd accumulation in crops. In this review, the latest knowledge on the physiological and molecular mechanisms of Cd uptake and translocation in crops is presented, providing a basis for developing advanced technologies for producing Cd-safe agro-products. Inoculation of plant growth-promoting rhizobacteria and arbuscular mycorrhizal fungi, application of organic matter, essential nutrients, beneficial elements, regulation of soil pH, and water management are efficient techniques used to decrease soil Cd bioavailability and inhibiting the uptake and accumulation of Cd in crops. In combination, these strategies for improving soil health are environmentally friendly and practical for reducing Cd accumulation in crops grown in lightly to moderately Cd-contaminated soil.

Interactive mode of biochar-based silicon and iron nanoparticles mitigated Cd-toxicity in maize

Cadmium contamination poses severe environmental and health threats, necessitating effective mitigation strategies. Rice husk biochar (BC) and nanoparticle (NP) treatments are emerging strategies with limited research on their synergistic benefits. This study assesses BC, silicon NPs (nSi), and iron NPs (nFe) modifications (B-nSi, B-nFe, and B-nSi-nFe) to reduce Cd-bioavailability in soil and its toxicity in maize, not reported before. Characterization of amendments validated, nSi and nFe attachment to BC, forming new mineral crystals to adsorb Cd. We found that B-nSi-nFe induced Cd-immobilization in soil by the formation of Cd-ligand complexes with the effective retention of NPs within microporous structure of BC. B-nSi-nFe increased soil pH by 0.76 units while reducing bioavailable Cd by 49 %, than Ck-Cd. Resultantly, B-nSi-nFe reduced Cd concentrations in roots and shoots by 51 % and 75 %, respectively. Moreover, the application of B-nSi-nFe significantly enhanced plant biomass, antioxidant activities, and upregulated the expression of antioxidant genes [ZmAPX (3.28 FC), ZmCAT (3.20 FC), ZmPOD (2.58 FC), ZmSOD (3.08 FC), ZmGSH (3.17 FC), and ZmMDHAR (3.80 FC)] while downregulating Cd transporter genes [ZmNramp5 (3.65 FC), ZmHMA2 (2.92 FC), and ZmHMA3 (3.40 FC)] compared to Ck-Cd. Additionally, confocal microscopy confirmed the efficacy of B-nSi-nFe in maintaining cell integrity due to reduced oxidative stress. SEM and TEM observations revealed alleviation of Cd toxicity to stomata, guard cells, and ultracellular structures with B-nSi-nFe treatment. Overall, this study demonstrated the potential of B-nSi-nFe for reducing Cd mobility in soil-plant system, mitigating Cd-toxicity in plants and improving enzymatic activities in soil.

Inactivation of harmful cyanobacteria Microcystis aeruginosa by Cu2+ doped corn stalk biochar treated with different pyrolysis temperatures

In this study, biochars (BCs) derived from corn stalk treated at various pyrolysis temperatures (350-950 °C) were prepared and then loaded with Cu2+ to form highly efficient algaecide, i.e. Cu2+-doped BC composites (Cu-BCs). The results showed BCs pyrolyzed at higher temperatures suppressed the growth of Microcystis aeruginosa in the order of BC550 ≫ BC750 > BC950, while BC350 accelerated cell growth due to the release of inorganic nutrients. The difference could be attributed to the physicochemical characteristics, including specific surface area, adsorption capacity of nutrients and the presence of particularly persistent free radicals. Furthermore, Cu-BCs exhibited the improved inactivation performance, but the 72 h growth inhibition rates and reaction activities of Cu-BCs were still influenced by the Cu2+ loading ratio and pyrolysis temperature. These results, reported for the first time, demonstrated the algae inactivation efficiency of pristine BCs, and Cu-BCs were principally manipulated by the biochar pyrolysis temperature.

Si-enriched biochars improved soil properties, reduced Cd bioavailability while enhanced Cd translocation to grains of rice

Biochar and silicon (Si) have been widely considered to play an important role in mitigating cadmium (Cd) toxicity. In this study, wild-type rice (WT, high-Si) and Si-deficient mutant rice (lsi1, low-Si) were used as raw materials to prepare biochar at 500℃; the Si concentrations of high- and low-Si biochar were 15.9% and 5.3%, respectively. The impacts of different application rates (0%, 2%, 4%) of high- and low-Si biochars on soil chemical properties, Si and Cd fractions and availability, Cd absorption, and translocation were investigated. The results showed that both types of biochars increased soil pH, soil available nitrogen, and available phosphorus and potassium; and promoted Si uptake and plant growth of rice. Soil available Si, CaCl2-Si, acetic-Si, H2O2-Si, oxalate-Si, and Na2CO3-Si were also increased by biochar supply, especially for high-Si biochar treatments. In addition, both types of biochars had no effects on soil total Cd, but reduced soil available Cd by 2-17% in early season 2022, and reduced oxidizable Cd and residual Cd. Biochar application did not influence Cd concentrations in roots, stems, and leaves, but significantly increased Cd uptake and transport from stems and leaves to grains. The results suggested that Si-rich biochar could improve soil nutrients, change soil Si/Cd fractions and availability, promote rice growth but increase the risk of Cd toxicity in grains, indicating the complex of straw biochar in remediating Cd-contaminated paddy soil.

Magnetically recyclable Cu2+ doped Fe3O4@biochar for in-situ inactivation of Microcystis aeruginosa: Performance and reusability

Harmful cyanobacterial blooms in eutrophic water bodies have frequently occurred worldwide and become a major environmental concern. Therefore, it is imperative to develop a stable and efficient algaecide to solve this issue. In this study, our purpose was to investigate the efficacy and mechanism of a newly developed Cu2+ doped Fe3O4@Biochar magnetic composite (Cu-Mag-BC) in in-situ inactivation of Microcystis aeruginosa (M. aeruginosa). We successfully synthesized the Cu-Mag-BC by coating Cu2+ onto Fe3O4@Biochar. Cu-Mag-BC exhibited superparamagnetic behavior and was uniformly impregnated by Cu2+. Cu-Mag-BC (5 mg/L), rapidly inactivated chlorophyll-a (Chl-a) in M. aeruginosa with low Fe and Cu leaching, during which time the OD264 value and malondialdehyde (MDA) content increased, while the activities of superoxide dismutase (SOD) and catalase (CAT) first increased and then decreased, due to oxidative stress induced by over-generated reactive oxygen species (ROS). Quantitative results showed that ·O2- and ·OH were the main ROS species produced from Cu-Mag-BC. Inactivation efficiency was maintained at approximately 80 % after three consecutive runs and total Chl-a removal efficiency reached 2.84 g/g, indicating good reusability and stability. A possible inactivation mechanism is proposed; amino groups and adipose chain were the primary oxidation sites. Thus, Cu-Mag-BC shows potential as a candidate for simultaneously inactivating harmful cyanobacteria and preventing secondary pollution.

Exploring carbon conversion and balance with magnetite-amended during pig manure composting

This study was designed to explore the magnetite in maturation and humification during pig manure (PM) and wolfberry branch fillings (BF) composting. Different proportions of magnetite (T1, 0%; T2, 2.5%; T3, 5%; T4, 7.5%;) were blended with PM for 50 days of composting. The findings indicated magnetite amendment has no influence on the maturity, and the 5% ratio significantly promoted humic acid (HA) formation and fulvic acid (FA) decomposition compared to other treatments. Compared to T1, magnetite addition significantly increased CO2 and CH4 emissions by 106.39%-191.69% and 6.88-13.72 times. The further analysis suggested that magnetite improved Ruminofilibacter activity were significantly positively associated with HA, and C emissions. The further PICRUSt 2 analysis showed membrane transport may enhance environmental information processing by magnetite. Overall, these results demonstrated higher organic matter (OM) degradation and HA formation with an additional increase in microbial activity highlighted advantages of using magnetite during PM composting.

Synthesis of Cu2+ doped biochar and its inactivation performance of Microcystis aeruginosa: Significance of synergetic effect

The harmful cyanobacteria bloom is frequently occurring in the aquatic environment and poses a tremendous threat to both aquatic organisms and ecological function. In this study, a series of Cu2+ doped biochar (BC) composites (Cu-BCs) with different loading ratios (0.1 %-5 wt %) (Cu-BC-0.1/0.5/1/2.5/5) was successfully fabricated through a one-step adsorption method for in-situ inactivation of Microcystis aeruginosa and simultaneous removal of microcystin-LR (MC-LR). Compared with the single BC/CuSO4 and other Cu-BCs composites, the Cu-BC-2.5 exhibited the best algae inactivation performance with the lowest 72 h medium effective concentration (EC50) value of 0.34 mg/L and highest chlorophyll α degradation efficiency of 8.31 g/g. Notably, the as-prepared Cu-BC-2.5 maintained good inactivation performance in the near-neutral pH (6.5-8.5), and the presence of humic acid and salts such as Na2CO3 and NaCl. The outstanding inhibitory effect of the Cu-BC-2.5 could be explained by the synergetic effect between biochar and Cu2+, which greatly elevated reactive oxygen species (ROS) intensity and in turn led to severe membrane damage and collapse of the antioxidant system. Additionally, the Cu-BC-2.5 could simultaneously remove the released microcystin-LR (MC-LR) throughout the inactivation process and prevent secondary pollution, thus offering a new insight into the alleviation of harmful cyanobacteria in aquatic environment.

Synergistic impacts of ferromanganese oxide biochar and optimized water management on reducing Cd accumulation in rice

Ferromanganese oxide biochar composite (FMBC) is an efficient remediation material for cadmium -contaminated soils. However, the effect of FMBC under varied water managements on the remediation of Cd-polluted soil is unclear. In this study, we conducted both incubation and field experiments to investigate the combined effects of corn-stover-derived biochar modified with ferromanganese on the immobilization and uptake of Cd by rice under continuous aerobic (A), aerobic-flooded (AF), and flooded-aerobic (FA) water management regimes. The results showed that loading iron-manganese significantly increased the maximum sorption capacity (Qm) of Cd on FMBC (50.46 mg g^-1) due to increased surface area, as compared to the pristine biochar (BC, 31.36 mg g^-1). The results revealed that soil Eh and pH were significantly affected by FMBC and it's synergistic application with different water regimes, thus causing significant differences in the concentrations of DTPA-extractable Cd under different treatments. The lowest DTPA-extractable Cd content (0.28-0.46 mg^-1) was observed in the treatment with FMBC (2.5 %) combined FA water amendment, which reduced the content of available Cd in soil by 2.63-28.4 %. Moreover, the treatments with FMBC-FA resulted the proportion of residual Cd increased by 22.2 % compared to the control. Variations in the content and fraction of Cd had a significant influence on its accumulation in the rice grains. The FMBC-FA treatments reduced the Cd concentration in roots, shoots and grains by 37.97 %, 33.98 %, and 53.66 %, respectively, when compared with the control. Predominantly because of the reduction in Cd biological toxicity and the improved soil nutrient content, the combined application increased the biomass and yield of rice to some extent. Taken together, the combination of the Fe-Mn modified biochar and flooded-aerobic water management may potentially be applied in Cd-polluted soil to mitigate the impacts of Cd on rice production.

Heavy metal stabilization remediation in polluted soils with stabilizing materials: a review

The remediation of soil contaminated by heavy metals has long been a concern of academics. This is due to the fact that heavy metals discharged into the environment as a result of natural and anthropogenic activities may have detrimental consequences for human health, the ecological environment, the economy, and society. Metal stabilization has received considerable attention and has shown to be a promising soil remediation option among the several techniques for the remediation of heavy metal-contaminated soils. This review discusses various stabilizing materials, including inorganic materials like clay minerals, phosphorus-containing materials, calcium silicon materials, metals, and metal oxides, as well as organic materials like manure, municipal solid waste, and biochar, for the remediation of heavy metal-contaminated soils. Through diverse remediation processes such as adsorption, complexation, precipitation, and redox reactions, these additives efficiently limit the biological effectiveness of heavy metals in soils. It should also be emphasized that the effectiveness of metal stabilization is influenced by soil pH, organic matter content, amendment type and dosage, heavy metal species and contamination level, and plant variety. Furthermore, a comprehensive overview of the methods for evaluating the effectiveness of heavy metal stabilization based on soil physicochemical properties, heavy metal morphology, and bioactivity has also been provided. At the same time, it is critical to assess the stability and timeliness of the heavy metals' long-term remedial effect. Finally, the priority should be on developing novel, efficient, environmentally friendly, and economically feasible stabilizing agents, as well as establishing a systematic assessment method and criteria for analyzing their long-term effects.

Biofuel Ash Aging in Acidic Environment and Its Influence on Cd Immobilization

Biofuel ash (BFA), which is the ash generated by biomass combustion in a biomass power plant, can be prepared as a heavy metal immobilizer and have a good immobilization effect on Cd in the soil environment of southern China, but the long-term effects of BFA on Cd immobilization remained unclear. Therefore, research about BFA aging and its influence on Cd immobilization was conducted in the paper. BFA was naturally aged into BFA-Natural aging (BFA-N) in the soil environment of southern China, and to simulate BFA-N, BFA was also artificially acid aged into BFA-Acid aging (BFA-A). The result indicated that BFA-A could partially simulate BFA-N in physicochemical properties. The Cd adsorption capacity of BFA reduced after natural aging and the decrease was more obvious in BFA-A according to Qm in Langmuir equation and qe from the pseudo-second-order kinetic model. The adsorption processes of BFA before and after aging were mainly controlled by chemical action rather than physical transport. The immobilization of Cd included adsorption and precipitation, and adsorption was the dominant factor; the precipitation proportion was only 12.3%, 18.8%, and 1.7% of BFA, BFA-N, and BFA-A, respectively. Compared with BFA, both BFA-N and BFA-A showed Ca loss, and BFA-A was more obvious than BFA-N. Ca content level was consistent with Cd adsorption level among BFA, BFA-N, and BFA-A. It could be inferred that the main immobilization mechanism of Cd by BFA before and after aging was consistent and closely related to Ca. However, the adsorption mechanism of electrostatic interaction, ion exchange, and hydroxyl complexation changed to varying degrees in BFA-N and BFA-A.

Recent progresses, challenges, and opportunities of carbon-based materials applied in heavy metal polluted soil remediation

The application of carbon-based materials (CBMs) for heavy metal polluted soil remediation has gained growing interest due to their versatile properties and excellent remediation performance. Although the progresses on applications of CBMs in removing heavy metal from aqueous solution and their corresponding mechanisms were well known, comprehensive review on applications of CBMs in heavy metal polluted soil remediation were less identified. Therefore, this review provided insights into advanced progresses on utilization of typical CBMs including biochar, activated carbon, graphene, graphene oxide, carbon nanotubes, and carbon black for heavy metal polluted soil remediation. The mechanisms of CBM remediation of heavy metals in soil were summarized, mainly including physical adsorption, precipitation, complexation, electrostatic interaction, and cationic-π coordination. The key factors affecting the remediation effect include soil pH, organic matter, minerals, microorganisms, coexisting ions, moisture, and material size. Disadvantages of CBMs were also included, such as: potential health risks, high cost, and difficulty in achieving co-passivation of anions and cations. This work will contribute to our understanding of current research advances, challenges, and opportunities for CBMs remediation of heavy metal-contaminated soils.

Effects of mercapto-palygorskite application on cadmium accumulation of soil aggregates at different depths in Cd-contaminated alkaline farmland

Mercapto-palygorskite (MP) is a novel immobilization material for cadmium (Cd) pollution, but the immobilization mechanism on alkaline Cd contaminated soil is not completely clear. In this paper, field experiment was carried out to study the effect of MP on the transfer of Cd in aggregates at different depth, the contribution of soil aggregates to the reduction of Cd in bulk soil and the immobilization mechanism of MP. The results showed that MP had no significant influence on the total Cd content, soil aggregates distribution, pH value, CEC value and enzyme activities no matter at any depth. At the depth of 0-20 cm, MP significantly reduced the DTPA-Cd in bulk soil by 60.7%, and increased the GWD and R_0.25 value. Similarly, the content of DTPA-Cd in the soil aggregates was deceased by 40.2-63.6%, the OM, DOC, available Fe, Mn and S in soil aggregates were significantly increased by 15.0-19.1%, 19.2-41.7%, 24.7-41.2% and 12.5-35.1% respectively. The Cd fraction of aggregates, especially exchangeable Cd (EXE-Cd) and bound to Fe/Mn oxide Cd (OX-Cd), was reduced by 5.4-28.1% and increased by 22.3-50.4%. In addition, MP had different effects on the GSF value of soil aggregates, but there was a downward trend for AF_X value at 0-20 cm soil depth. MP almost had no significant influence on the above indexes at the depth of 20-40 cm and 40-60 cm, but except the Cd fraction, the GSF and AF_X value in individual aggregates. Small aggregates (<1 mm) and large aggregates (>1 mm) contributed 59.1% and 22% to the reduction of Cd in bulk soil. Partial Least Structural Equation Model (PL-SEM) revealed that S promoted the production of available Fe, Mn, OM and DOC, while the content of DOC inhibited the formation of EXE-Cd and the available Fe and Mn boosted the production of OX-Cd.

Supplying amendments alleviates aluminum toxicity and regulates cadmium accumulation by spinach in strongly acidic soils

Al toxicity and Cd pollution are key limiting factors for agricultural production in the acidic soils in China. The application of amendments is an effective and promising measure for remediating strongly acidic Cd-contaminated soils. However, the information on applying amendments for alleviating Al toxicity and regulating plant Cd accumulation is still rare. Here, oyster shell (OS), red mud (RM), hydroxyapatite (HAP), and biochar (BC) at 30 g kg^-1 were investigated for alleviating Al toxicity and decreasing Cd accumulation in spinach plants. The results showed that four amendments significantly increased soil pH, and reduced soil exchangeable Al³⁺ and DTPA-Cd, promoted spinach growth (P < 0.05). Al(OH)₃⁰ and Al-HA were the main forms of active Al in soil. The BC and OS were more effective to alleviate Al toxicity but significantly (P < 0.05) increased Cd accumulation in spinach. RM and HAP effectively reduced the uptake of Cd by spinach plants as well as alleviated Al toxicity (P < 0.05). Bivariate correlation analysis and the partial least squares path modeling analysis indicated that soil exchangeable Al³⁺ was the main limiting factor for biomass production. Our study demonstrated that HAP could significantly alleviate Al toxicity, promote spinach growth, and decrease Cd accumulation in strongly acidic Cd-contaminated soils. Besides, OS and BC effectively alleviated soil Al toxicity leading to promoting the growth of spinach. Compared with CK, RM treatment significantly reduced soil Cd bioavailability (61.2%) and decreased Cd concentration and uptake of spinach plants by 90.0% and 50.7%. These results indicated that RM could be used as an efficient amendment in Cd contaminated.

Recent developments in modification of biochar and its application in soil pollution control and ecoregulation

Soil pollution has become a real threat to mankind in the 21st century. On the one hand, soil pollution has reduced the world's arable land area, resulting in the contradiction between the world's population expansion and the shortage of arable land. On the other hand, soil pollution has seriously disrupted the soil ecological balance and significantly affected the biodiversity in the soil. Soil pollutants may further affect the survival, reproduction and health of humans and other organisms through the food chain. Several studies have suggested that biochar has the potential to act as a soil conditioner and to promote crop growth, and is widely used to remove environmental pollutants. Biochar modified by physical, chemical, and biological methods will affect the treatment efficiency of soil pollution, soil quality, soil ecology and interaction with organisms, especially with microorganisms. Therefore, in this review, we summarized several main biochar modification methods and the mechanisms of the modification and introduced the effects of the application of modified biochar to soil pollutant control, soil ecological regulation and soil nutrient regulation. We also introduced some case studies for the development of modified biochars suitable for different soil conditions, which plays a guiding role in the future development and application of modified biochar. In general, this review provides a reference for the green treatment of different soil pollutants by modified biochar and provides data support for the sustainable development of agriculture.

Insights on ball milling enhanced iron magnesium layered double oxides bagasse biochar composite for ciprofloxacin adsorptive removal from water

Both ciprofloxacin (CIP) and sugarcane bagasse have brought enormous pressure on environmental safety. Here, an innovative technique combining Fe-Mg-layered double oxides and ball milling was presented for the first time to convert bagasse-waste into a new biochar adsorbent (BM-LDOs-BC) for aqueous CIP removal. The maximum theoretical adsorption capacity of BM-LDOs-BC reached up to 213.1 mg g^-1 due to abundant adsorption sites provided by well-developed pores characteristics and enhanced functional groups. The results of characterization, data fitting and environmental parameter revealed that pore filling, electrostatic interactions, H-bonding, complexation and π-π conjugation were the key mechanisms for CIP adsorptive removal. BM-LDOs-BC exhibited satisfactory environmental safety and outstanding adsorption capacity under various environmental situations (pH, inorganic salts, humic acid). Moreover, BM-LDOs-BC possessed excellent reusability. These superiorities illustrated that BM-LDOs-BC was a promising adsorbent and created a new avenue for rational placement of biowaste and high-efficiency synthesis of biochar for antibiotic removal.

Adsorption effect and the removal mechanism of silicate composite biochar particles on cadmium in soil

Ordinary biochar has the disadvantages of low strength and fragility, and it is difficult to be separated in heavy metal contaminated soil after the remediation process. In order to realize the recovery and reuse of biochar, we prepared silicate composite biochar (SCB) and the magnetic silicate composite biochar (MSCB) with consistent particle size and high hardness. As well as the passivation effect and mechanism of the material on cadmium in soil was also investigated. The results showed that: (1) The MSCB had good hydraulic properties and strong magnetism, which can be quickly separated from the soil under the condition of external magnetic field. (2) The MSCB can remove 30.32%-38.80% of cadmium in the soil after three times of "application-separation-desorption-reuse", as well as the SCB can remove 28.30%-35.78% of cadmium from the soil. (3) The recovered SCB and MSCB had a certain mass loss, the mass loss rate of the biochar particles was in the range of 2.65%-4.90% after each time of recycling. (4) MSCB mainly immobilized cadmium ions through pore interception, complexation of oxygen-containin/iron-containin functional group and precipitation reaction.

Heavy Metal Pollution and Health Risk Assessment of Vegetable-Soil Systems of Facilities Irrigated with Wastewater in Northern China

Soil pollution by heavy metals is a major concern in China and has received much attention in recent years. Aiming to investigate the status of heavy metal pollution and the safety of vegetables in the soil of wastewater-irrigated facilities, this study investigated the distribution and migration characteristics of heavy metals in vegetable−soil systems of facilities in a typical sewage irrigation area of the Xi River, Shenyang City, northern China. Health risks due to the fact of exposure to heavy metals in the vegetable soil of facilities and ingrown vegetables through different exposure pathways were evaluated. Spatial interpolation and a potential ecological risk assessment were applied to evaluate the soil quality. Bioaccumulation factors (BCFs) were used to analyze the absorption and transportation capacity of Cd, Cu, Pb, and Zn by different parts of different vegetables. The results showed that the average concentration of Cd exceeded the standard values by 1.82 times and accumulated by 11 times, suggesting that Cd poses the most severe pollution among the four metals in the soil of facilities in the Xi River sewage irrigation area. In the city, a significant accumulation of Cd in the soil was identified with different spatial distributions. Cd also contributed the most in terms of the estimated potential ecological risk index, while the impacts of the other three metals were relatively small. The concentrations of heavy metals were mostly lower than the limit set by the corresponding Chinese standards. Various BCFs were observed for the four metals in the order Cd > Zn > Cu > Pb. Vegetables also demonstrated different BCFs in the order of leaf vegetables > Rhizome vegetable > Solanaceae vegetable. The magnitude of the noncarcinogenic risk for all four heavy metals was less than one for all three exposure routes and did not cause significant noncarcinogenic health effects in humans. However, the carcinogenic risk of Cd from some vegetables via dietary intake was considered higher. Protection measures should be taken to implement better pollution control and land use planning.

Qualitative and quantitative investigation on adsorption mechanisms of Cd(II) on modified biochar derived from co-pyrolysis of straw and sodium phytate

Developing effective modification methods and obtaining a comprehensive understanding of adsorption mechanisms are essential for the practical application of biochars for the removal of heavy metals from solutions. In this study, rice straw was impregnated with sodium phytate and pyrolyzed at 350 °C, 450 °C, and 550 °C to synthesize modified biochars (i.e., MBC350, MBC450, and MBC550). The Cd(II) adsorption capacities and contributions of different mechanisms, including the effects of biochar-derived dissolved organic matter (BDOM), were investigated using batch sorption experiments and characterization analyses. The modification of sodium phytate promoted the pyrolysis of biomass, thereby increasing the BDOM content and aromatic structures at low and high pyrolysis temperatures, respectively. Moreover, the modification also increased the exchangeable Na⁺ and carbonate contents in the modified biochars. Compared with the raw biochars, the Cd(II) adsorption capacities of modified biochars increased by 3.3-4.3 times, and MBC550 had the highest Cd(II) adsorption capacity (126.5 mg/g), of which precipitation with minerals and interaction with π-electrons contributed 41.7% and 45.8%, respectively. However, at a lower pyrolysis temperature, the Cd(II) adsorption attributed to ion exchange and co-deposition with BDOM significantly increased, especially on MBC350 (33.9 and 12.6 mg/g, respectively). These results indicate that modification by sodium phytate effectively enhanced various adsorption mechanisms, thereby increasing the Cd(II) adsorption capacity. In addition, the contribution of co-deposition with BDOM to adsorption was unneglectable for the biochars pyrolyzed at low temperatures.

Two-step modification (sodium dodecylbenzene sulfonate composites acid-base) of sepiolite (SDBS/ABsep) and its performance for remediation of Cd contaminated water and soil

To enhance the remediation capability of cadmium (Cd) polluted water and soil, our approach involved two-step modification of sepiolite (Sep) through acid-base compound treatment and sodium dodecylbenzene sulfonate (referring as SDBS/ABsep), and then the batch adsorption and soil culture experiments were conducted to investigate its immobilization potential and mechanisms of Cd. The findings revealed that the SDBS/ABsep had a rougher surface and higher porosity, and the maximum adsorption capacity of Cd²⁺ onto SDBS/ABsep was 241.39 mg g^-1, which was 5.32 times higher than that on Sep. It conformed to the pseudo-second-order kinetic and Redlich-Paterson isotherm models. SDBS/ABsep exhibited a high efficiency for immobilization-induced remediation of Cd polluted soils. Upon the addition of different concentrations of SDBS/ABsep, DTPA-Cd content decreased by 17.41-47.33% compared with the control groups, and the ratio of residual fraction-Cd increased from 4.67% in unamended soil to 14.05% in the presence of 4% SDBS/ABsep. SEM-EDS, TEM, FTIR, XRD, and XPS analyses indicated that the interaction mechanisms between SDBS/ABsep and Cd included the electrostatic force, precipitation, ion exchange, and complexation of sulfonic acid groups. Therefore, SDBS/ABsep can be used as a promising effective passivation agent for remediation of Cd contaminated soil and water.

Thermochemical conversion of heavy metal contaminated biomass: Fate of the metals and their impact on products

With the rapid depletion of fossil energy and increasingly severe environmental pollution, the development of biomass resources for biorefineries has become a new research focus. However, heavy metals may be released during the thermochemical treatment when the biomass materials used in biomass conversion are contaminated by heavy metals. This can cause secondary environmental pollution or transference to the target products, reducing product quality. Therefore, having a systematic understanding of the fate of heavy metals in biomass conversion is necessary for alleviating potential risks. This study presents the current status of contaminated biomass and conversion products involving thermochemical processes, the migration, transformation, and impact of heavy metals in biomass conversion was investigated, and the utilization of heavy metals in contaminated biomass was briefly outlined. This review aims to link biomass conversion to the fate of heavy metals, avoid existing risks as much as possible to produce cleaner products efficiently, and promote the sustainable development of heavy metal contaminated biomass resources.

The impact of pristine and modified rice straw biochar on the emission of greenhouse gases from a red acidic soil

With the growing awareness of environmental impacts of land degradation, pressure is mounting to improve the health and productivity of degrading soils, which could be achieved through the use of raw and modified biochar materials. The primary objective of the current study was to investigate the efficiency of pristine and Mg-modified rice-straw biochar (RBC and MRBC) for the reduction of greenhouse gases (GHG) emissions and improvement of soil properties. A 90 days' incubation experiment was conducted using treatments which included control (CK), two RBC dosages (1% and 2.5%), and two MRBC doses (1% and 2.5%). Soil physico-chemical and biological properties were monitored to assess the effects due to the treatments. Results showed that both biochars improved soil physicochemical properties as the rate of biochar increased. The higher rates of biochar (RBC_2.5 and MRBC_2.5) particularly increased enzymatic activities (Catalase, Invertase and Urease) in comparison to the control. Data obtained for phospholipid fatty acid (PLFA) concentration indicated an increase in the Gram-negative bacteria (G-), actinomycetes and total PLFA with the increased biochar rate, while Gram-positive bacteria (G+) showed no changes to either level of biochar. As regards fungi concentration, it decreased with the biochar addition, whereas arbuscular mycorrhizal fungi (AMF) showed non-significant changes. The release of CO₂, CH₄ and N₂O showed a decreasing trend over the time. CO₂ cumulative emission decreased for MRBC₁ (5%) and MRBC_2.5 (9%) over the pristine biochar treatments. The cumulative N₂O emission decreased by 15-32% for RBC₁ and RBC_2.5 and by 22-33% for MRBC₁ and MRBC_2.5 as compared to the control, whereas CH₄ emission showed non-significant changes. Overall, the present study provides for the first-time data that could facilitate the correct use of Mg-modified rice biochar as a soil additive for the mitigation of greenhouse gas emission and improvement of soil properties.

Sustainable biochar: A facile strategy for soil and environmental restoration, energy generation, mitigation of global climate change and circular bioeconomy

The increasing agro-demands with the burgeoning population lead to the accumulation of lignocellulosic residues. The practice of burning agri-residues has consequences viz. Release of soot and smoke, nutrient depletion, loss of soil microbial diversity, air pollution and hazardous effects on human health. The utilization of agricultural waste as biomass to synthesize biochar and biofuels, is the pertinent approach for attaining sustainable development goals. Biochar contributes in the improvement of soil properties, carbon sequestration, reducing greenhouse gases (GHG) emission, removal of organic and heavy metal pollutants, production of biofuels, synthesis of useful chemicals and building cementitious materials. The biochar characteristics including surface area, porosity and functional groups vary with the type of biomass consumed in pyrolysis and the control of parameters during the process. The major adsorption mechanisms of biochar involve physical-adsorption, ion-exchange interactions, electrostatic attraction, surface complexation and precipitation. The recent trend of engineered biochar can enhance its surface properties, pH buffering capacity and presence of desired functional groups. This review focuses on the contribution of biochar in attaining sustainable development goals. Hence, it provides a thorough understanding of biochar's importance in enhancing soil productivity, bioremediation of environmental pollutants, carbon negative concretes, mitigation of climate change and generation of bioenergy that amplifies circular bioeconomy, and concomitantly facilitates the fulfilment of the United Nation Sustainable Development Goals. The application of biochar as seen is primarily targeting four important SDGs including clean water and sanitation (SGD6), affordable and clean energy (SDG7), responsible consumption and production (SDG12) and climate action (SDG13).

Preparation of magnesium Ferrite-Doped magnetic biochar using potassium ferrate and seawater mineral at low temperature for removal of cationic pollutants

Magnetic biochar has captured a great interest for remediation of environment as an easily separable carbonous adsorbent. Herein, a highly adsorptive magnetic biochar was manufactured through seawater mineral and K₂FeO₄ co-promoted pyrolysis of jackfruit peel at 300 °C for removal of different cationic pollutants, and characterized by element analysis, FTIR, SEM-EDS, XRD, XPS and so on. MgFe₂O₄ was generated without external base and a 19.42 emu/g saturation magnetization was achieved. Simultaneously, iron oxides and oxygen containing groups were introduced. The magnetic biochar exhibited 61.30 mg/g, 129.61 mg/g, and 1238.30 mg/g adsorption capacities for Cu²⁺, methylene blue (MB), and malachite green (MG) at 25 °C, respectively, and remarkably surpassed the corresponding pristine biochar. The adsorption of MB and MG was mainly realized by electrostatic interaction, hydrogen bonding, complexation, and π-π electron-donor-acceptor interaction, and that of Cu²⁺ was attributed to electrostatic interaction, hydrogen bonding, and complexation.

Typical JUNCAO Overwintering Performance and Optimized Cultivation Conditions of Pennisetum sp. in Guizhou, Southwest China

JUNCAO technology plays a critical role in managing soil ecology and alleviating contradiction between mushroom and forest, as JUNCAO can partially replace the wood chip as mushroom culture medium. At present, few reports focus on exploring the effects of seeding density, nitrogen fertilizers on JUNCAO growth and their overwintering performance. To close the above-mentioned research gaps, five typical types of JUNCAO were evaluated by investigating their grass yield, overwintering germination rates and nutrient adsorption condition. The results indicated that Pennisetum sp. showed the best overwintering performance. In addition, the optimized planting conditions for Pennisetum sp. include cultivation density (60 cm × 50 cm), oblique seeding using stem with double nodes, and 800 kg·ha−1 nitrogen fertilizer. This study gave good insights into low-temperature resisting performance and their overwintering characteristics of diverse JUNCAO species that favor for promoting the safe and efficient productions of the JUNCAO industry in subtropical areas.

Effects of different feedstocks-based biochar on soil remediation: A review

As a promising amendment, biochar has excellent characteristics and can be used as a remediation agent for diverse types of soil pollution. Biochar is mostly made from agricultural wastes, forestry wastes, and biosolids (eg, sewage sludge), but not all the biochar has the same performance in the improvement of soil quality. There is a lack of guidelines devoted to the selection of biochar to be used for different types of soil pollution, and this can undermine the remediation efficiency. To shed light on this sensitive issue, this review focus on the following aspects, (i) how feedstocks affect biochar properties, (ii) the effects of biochar on heavy metals and organic pollutants in soil, and (iii) the impact on greenhouse gas emissions from soil. Generally, the biochars produced from crop residue and woody biomass which are composed of lignin, cellulose, and hemicellulose are more suitable for organic pollution remediation and greenhouse gas emission reduction, while biochar with high ash content are more suitable for cationic organic pollutant and heavy metal pollution (manure and sludge, etc.). Additionally, the effect of biochar on soil microorganisms shows that gram-negative bacteria in soil tend to use WB biochar with high lignin content, while biochar from OW (rich in P, K, Mg, and other nutrients) is more able to promote enzyme activity. Finally, our recommendations on feedstocks selection are presented in the form of a flow diagram, which is precisely intended to be used as a support for decisions on the crucial proportioning conditions to be selected for the preparation of biochar having specific properties and to maximize its efficiency in pollution control.

Evaluation of Soil and Irrigation Water Quality in Caohai Lakeside Zone

Due to the rapid population growth and over-application of fertilizers in the Caohai surrounding farmlands, controlling the non-point source pollution in the Caohai Lakeside Zone is significant for the local ecology balance and human health safety. A total of 54 soil and 24 irrigation water samples were collected in the Caohai Lakeside Zone to evaluate the current status of soil fertility and heavy metal pollution by measuring soil and water heavy metal content and soil physicochemical properties such as soil total nitrogen, total phosphorus, organic matter, and soil pH. These results showed that the total amounts of organic matter, nitrogen, phosphorus, potassium, and effective nutrient content in the Caohai Lakeside Zone were all at a rich level according to Chinese soil nutrient grade standard; the content of lead (Pb), chromium (Cr), cadmium (Cd), mercury (Hg), and arsenic (As) in the soil all exceeds the safety standard of Chinese classification of soil environmental quality assessment. In addition, the over-standard rates of Cd and Cr were 24.1% and 14.8%, respectively. On the whole, the comprehensive quality index (CQI) of the soil in the Caohai Lakeside Zone is 6.48, which is attributed to the heavy Cd pollution and the good soil fertility. The heavy metal content of the irrigation water met the requirements of irrigation water quality. It is feasible to use the irrigation water of Caohai Lake in the actual agricultural production process. Therefore, in terms of the comprehensive management and pollution control of Caohai, special attention should be paid to the control of Cd, Pb, As, and Hg pollution sources.

Sustainable biochar/MgFe2O4 adsorbent for levofloxacin removal: Adsorption performances and mechanisms

The limitation of low efficiency and complicated separation after adsorption make the practical application of biochar a huge challenge. Here, one pomelo peel-derived magnetic biochar composite, biochar supported MgFe₂O₄ (BMF) was fabricated and adopted for Levofloxacin (LFX) adsorption. Adsorption behaviors and mechanisms were investigated by characterization analysis, batch experiments, and data modeling. Results indicated that adsorption could be strikingly influenced by pyrolysis temperature. Adsorption kinetic was well fitted by pseudo-second-order model. Adsorption isotherm was best fitted with Freundlich model. The maximum adsorption capacity was 115 mg g^-1. Moreover, hydrophobic effect played a limited contribution according to dual-mode model analysis. LFX adsorption was spontaneous and endothermic. Adsorption mechanisms were ascribed to electrostatic interactions, H-bonding, functional groups complexation, and π-π electron donor-acceptor interactions. Besides that, BMF had the potential for repeated use. This research proposed a novel and promising method for LFX or other antibiotics adsorption removal.

New insights into ball milling effects on MgAl-LDHs exfoliation on biochar support: A case study for cadmium adsorption

Ball milling (BM) as a solvent-free technology has been widely used to tailor the biochar-based adsorbents with high porosity and well dispersion for enhancing their environmental applications. In this study, the ball-milled layered double hydroxides (LDHs) biochar composite (B-LDHs-BC) was successfully fabricated with BM method for Cd(II) adsorption and the BM effects on the LDHs-BC structure-performance relationships were investigated. The solid-state characterization demonstrated the LDHs were successfully exfoliated by BM on the B-LDHs-BC surface which was identified by the enlarged basal spacing and reduced crystallite size of the LDHs. Although the BET surface area of B-LDHs-BC (226 m²/g) was slightly lower than the ball-milled BC, the B-LDHs-BC had more O-containing functional groups and higher adsorption capacity (119 mg/g). The kinetics experiments indicated that the Cd(II) removal by B-LDHs-BC was through both the physical and chemical adsorption processes, and the liquid membrane diffusion was the rate-controlling step. The positive BM effects mainly induced more abundant acidic functional groups and active adsorption sites, and thus enhanced Cd(II) performance of B-LDHs-BC. This work demonstrated a facile solvent-free method for production of the exfoliated LDHs modified BC composite, and also well illustrated the BM effects which can extend their practical use in environment.

Activated low-grade phosphate rocks for simultaneously reducing the phosphorus loss and cadmium uptake by rice in paddy soil

Cadmium (Cd) pollution and phosphorus (P) leaching in paddy soils has raised the global concern. In this study, two kinds of the low grade phosphate rocks activated by the sodium lignosulfonate (SL) and humic acid (HA) were fabricated for soil Cd passivation and reduction of the soil P leaching simultaneously. The mechanisms of the Cd adsorption and passivation by the activated phosphate rocks (APRs) were investigated through the batch experiment and the indoor culture test (i.e., incubation and pot experiments) in the Cd-polluted paddy soil. The effects of the APRs on the potted rice growth, uptake of Cd by rice and P loss were also studied. In comparison with the superphosphate treatment, the cumulative P loss from SL- and HA-APRs were reduced by the 65.2% and 65.3%. In terms of the Cd passivation, the Cd adsorbed on the APRs was through the chemical ways (i.e., ligand exchange and the formation of internal complexes). The application of the APRs significantly decreased the soil exchangeable Cd by 48.9%-55.0%, while the Fe/Mn oxides-bound Cd and residual Cd increased significantly by 19.6%-20.3% and 50.7%-69.4%, respectively. Pot experiment also suggested that both the APRs treatments (SL- and HA-APRs) significantly diminished soil Cd accumulation in rice (by 72.7% and 62.8%) coupling with the significantly decreased P leaching. These results provide a sustainable way to explore a novel cost-effective, high-efficient and bi-functional mineral-based soil amendments for environmental remediation.

Interactive assessment of lignite and bamboo-biochar for geochemical speciation, modulation and uptake of Cu and other heavy metals in the copper mine tailing

This study was designed to examine the combined effect of bamboo-biochar (BC) and water-washed lignite (LGT) at copper mine tailings (CuMT) sites on the concentration of Cu and other metals in pore water (PW), their bioavailability, and change in geochemical speciation. Rapeseed (first cropping-season) and wheat (second cropping-season) were grown for 40-days each and the influence of applied-amendments on both cropping seasons was observed and compared. A significant increase in pH, water holding capacity (WHC), and soil organic carbon (SOC) was observed after the applied amendments in second cropping-seasons. The BC-LGT significantly reduced the concentration of Cu in PW after second cropping seasons; however, the concentration of Pb and Zn were increased with the individual application of biochar and LGT, respectively. BC-LGT and BC-2% significantly reduced the bioavailability of Cu and other HMs in both cropping seasons. The treated-CuMT was subjected to spectroscopic investigation through X-ray photoelectron spectroscopy (XPS), Fourier transform Infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD). The results showed that Cu sorption mainly involved the coordination with hydroxyl and carboxyl functional groups, as well as the co-precipitation or complexation on mineral surfaces, which vary with the applied amendment and bulk amount of Mg, Mn, and Fe released during sorption-process. The co-application of BC-LGT exerted significant effectiveness in immobilizing Cu and other HMs in CuMT. The outcomes of the study indicated that co-application of BC-LGT is an efficacious combination of organic and inorganic materials for Cu adsorption which may provide some new information for the sustainable remediation of copper mine tailing.

Integrated Assessment of Nickel Electroplating Industrial Wastewater Effluent as a Renewable Resource of Irrigation Water Using a Hydroponic Cultivation System

Nickel, a micronutrient essential for plant growth and development, has been recognized as a metallic pollutant in wastewater. The concentration of nickel ions in the water course, exceeding the maximum tolerable limit, has called for an alarming attention, due to the bioaccumulative entry in the water-plant-human food chain, leaving a burden of deteriorative effects on visible characteristics, physiological processes, and oxidative stress response in plants. In this work, the renewable utilization of nickel electroplating industrial wastewater effluent (0, 5, 10, 25, 50, and 100%) as a viable source of irrigation water was evaluated using a hydroponic cultivation system, by adopting Lablab purpureus and Brassica chinensis as the plant models, in relation to the physical growth, physiological and morphological characteristics, photosynthetic pigments, proline, and oxidative responses. The elongation of roots and shoots in L. purpureus and B. chinensis was significantly inhibited beyond 25 and 5% of industrial wastewater. The chlorophyll-a, chlorophyll-b, total chlorophyll, and carotenoid contents, accompanied by alterations in the morphologies of xylem, phloem, and distortion of stomata, were recorded in the industrial wastewater-irrigated groups, with pronounced toxicity effects detected in B. chinensis. Excessive proline accumulation was recorded in the treated plant models. Ascorbate peroxidase (APX), guaiacol peroxidase (POD), and catalase (CAT) scavenging activities were drastically altered, with a profound upregulation effect in the POD activity in L. purpureus and both POD and APX in B. chinensis, predicting the nickel-induced oxidative stress. Conclusively, the diluted industrial wastewater effluent up to the optimum concentrations of 5 and 25%, respectively, could be feasibly reused as a renewable resource for B. chinensis and L. purpureus irrigation, verified by the minimal or negligible phytotoxic implications in the plant models. The current findings have shed light on the interruption of nickel-contaminated industrial wastewater effluent irrigation practice on the physical and biochemical features of food crops and highlighted the possibility of nutrient recycling via wastewater reuse in a sustainable soilless cultivation.

A meta-analysis of heavy metal bioavailability response to biochar aging: Importance of soil and biochar properties

Biochar has been widely applied to remediate the heavy metal-polluted soils, whereas biochar aging can induce the changes of the biochar physic-chemical properties. Afterwards, the bioavailability of heavy metals (BHM) will vary in soils which likely increase the unstable fractions of heavy metals and the following environmental risks. To explore the biochar aging effects on the BHM changes in responses to the variation of experimental conditions and biochar properties, a meta-analysis for the literatures published before May 2020 was conducted. A sum of 257 independent observations from 22 published papers was obtained. The results from the analysis of boosted regression tree showed that the soil pH was the most important factor influencing the BHM changes in biochar amended soil, followed by soil texture, aging time and biochar pyrolysis temperature. The results of this review showed that the BHM was decreased by 16.9%, 28.7% and 6.4% in weakly acid soil (pH 6.00-6.99), coarse- and medium-textured soils, respectively, but increased by 149% and 121% in the alkaline (pH > 8.00) and fine-textured soils. The BHM declined in the soils amended with biochar pyrolyzed at relative high temperature (> 500 °C), and increased during aging in soils amended with biochar pyrolyzed at relatively low temperature (401-500 °C). In terms of diverse immobilized heavy metals, only bioavailable Zn in soil decreased after aging. However, there was no significant changes in Cd, Cu and Pb's bioavalability. Besides, the BHM was decreased by 18.6% within the short-term (less than one year) biochar aging, while showed inverse trend during the longer aging processes. Besides, the application of lignin-enriched biochar may counteract the positive effects of the biochar aging on BHM. Our works may promote the interpretation of the interference factors on the BHM changes and filled the research gaps on biochar aging process in soils.

Mitigation of arsenic accumulation in arugula (Eruca sativa Mill.) using Fe/Al/Zn impregnated biochar composites

Arsenic (As) contamination of aquatic and soil environments is a global concern, highlighting the importance of As removal via high-efficiency and low-cost removal technologies. In the present study, novel trimetallic biochar was developed through pyrolyzing corn straw impregnated with inexpensive metal Fe/Al/Zn (hydr)oxides. The results of SEM, FTIR, and XRD verified the formation of metal oxyhydroxides on the surface of the modified biochars, and the modification increased the specific surface area (SSA), total pore volume (TPV), and surface charge of the Fe/Al/Zn (hydr)oxides modified biochar (FAZ-CB). Compared with the original biochar, higher sorption rates and capacities was observed for the FAZ-CB. The maximum As (V) adsorption capacities of FAZ-CB reached 82.9 mg g^-1. A pot experiment showed that application of FAZ-CB decreased bioavailable As fractions in the red soil significantly reduced the uptake of As by arugula in edible part and root (42.6 and 56.8%, respectively). The present study demonstrated the superiority of FAZ-CB in the As(V) immobilization in red soil, suggesting that it is a promising candidate for practical application for As immobilization. Therefore, FAZ-CB can be used as a promising functionalized biochar to remediate As contaminated red soil.

Porous biochar-nanoscale zero-valent iron composites: Synthesis, characterization and application for lead ion removal

Nano-zero-valent iron has been used in combination with a variety of support carriers to remove heavy metals in solution. However, pre-treatment of the carrier can reflect a better synergistic effect and thus achieve high heavy metal removal capabilities. In this study, the hydrophilic biochar obtained by an acid ammonium persulfate oxidation has an adsorption capacity of up to 135.4 mg g^-1 for Pb²⁺ (25 °C, pH = 6 with adsorbent amount of 10 mg and Pb²⁺ concentration of 50 mg L^-1). Due to the strong Fe-C-O covalent bond, nZVI increases the binding force with the carbon matrix. Benefitting from the high specific surface area, porous structure and rich oxygen-containing functional groups, the resultant nZVI-HPB samples are favourable for Pb²⁺ diffusion and adsorption, exhibiting maximum adsorption capacity of 480.9 mg g^-1 (pH = 6, 25 °C with adsorbent amount of 10 mg and Pb²⁺ concentration of 200 mg L^-1). The multiple interaction mechanisms in the Pb²⁺ removal process such as the reduction reaction, complexation and co-precipitation proceed simultaneously are concluded by the analyses of Fourier-Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) spectra.

Cadmium Immobilization in the Rhizosphere and Plant Cellular Detoxification: Role of Plant-Growth-Promoting Rhizobacteria as a Sustainable Solution

Food is the major cadmium (Cd)-exposure pathway from agricultural soils to humans and other living entities and must be reduced in an effective way. A plant can select beneficial microbes, like plant-growth-promoting rhizobacteria (PGPR), depending upon the nature of root exudates in the rhizosphere, for its own benefits, such as plant growth promotion as well as protection from metal toxicity. This review intends to seek out information on the rhizo-immobilization of Cd in polluted soils using the PGPR along with plant nutrient fertilizers. This review suggests that the rhizo-immobilization of Cd by a combination of PGPR and nanohybrid-based plant nutrient fertilizers would be a potential and sustainable technology for phytoavailable Cd immobilization in the rhizosphere and plant cellular detoxification, by keeping the plant nutrition flow and green dynamics of plant nutrition and boosting the plant growth and development under Cd stress.

Arsenic adsorption on layered double hydroxides biochars and their amended red and calcareous soils

Highly efficient amendments for controlling arsenic (As) pollution in soils are imperative to improve soil quality and enhance food production. In the present study, corn stalk biochar was functionalized with three kinds of layered double hydroxides (i.e., Mg-Al-LDH, Zn-Al-LDH, and Cu-Al-LDH) using a simple co-precipitation method. The synthesized LDH biochar composites (LDH@BCs) exhibited better adsorption capacity and affinity for As due to their enhanced anion exchange capacity and reactive surface hydroxyl groups identified by XRD, FTIR and XPS. Arsenic (As) bioavailability and leaching characteristics of spiked red and calcareous soils (150 mg As/kg) amended with or without LDH@BCs were investigated using soil column. The Zn-Al-LDH@BC decreased the As (V) migration and increased pak choi (Brassica chinensis L.) growth in both red and calcareous soil. These results indicated that LDH modified biochar is an effective way to overcome the shortfalls of unmodified biochar in mitigating the As contamination and provide a basis for further exploring the potential of biochar-based soil amendments for environmental remediation.

Editorial: New Research on Soil Degradation and Restoration

The Virtual Special Issue (VSI) "New Research on Soil Degradation and Restoration" was proposed by the Guest-Editors (the authors of this editorial piece) to Journal of Environmental Management taking into account the following aspects: (a) Firstly, soil degradation is a main issue all over the world; (b) Secondly, physical, chemical and biological degradation of soil environments need detailed research, also going deeper in some new aspects poorly covered up to now; and (c) Similarly, new quality research on restoration of degraded soils, dumping sites, different areas affected by mining activities, and so on, would be clearly useful in order to prevent and/or solve critical environmental hazards. As a result, 110 manuscripts were submitted to the VSI by authors from around the world, and near 50 high quality works were finally published. The Guest-Editors of the VSI consider that the papers published will be of great interest for researchers working in this field, as well as for the overall community, as they include aspects clearly relevant at a global level.

Application Research of Biochar for the Remediation of Soil Heavy Metals Contamination: A Review

Soil contamination by heavy metals threatens the quality of agricultural products and human health, so it is necessary to choose certain economic and effective remediation techniques to control the continuous deterioration of land quality. This paper is intended to present an overview on the application of biochar as an addition to the remediation of heavy-metal-contaminated soil, in terms of its preparation technologies and performance characteristics, remediation mechanisms and effects, and impacts on heavy metal bioavailability. Biochar is a carbon-neutral or carbon-negative product produced by the thermochemical transformation of plant- and animal-based biomass. Biochar shows numerous advantages in increasing soil pH value and organic carbon content, improving soil water-holding capacity, reducing the available fraction of heavy metals, increasing agricultural crop yield and inhibiting the uptake and accumulation of heavy metals. Different conditions, such as biomass type, pyrolysis temperature, heating rate and residence time are the pivotal factors governing the performance characteristics of biochar. Affected by the pH value and dissolved organic carbon and ash content of biochar, the interaction mechanisms between biochar and heavy metals mainly includes complexation, reduction, cation exchange, electrostatic attraction and precipitation. Finally, the potential risks of in-situ remediation strategy of biochar are expounded upon, which provides the directions for future research to ensure the safe production and sustainable utilization of biochar.

Heavy metal-immobilizing bacteria increase the biomass and reduce the Cd and Pb uptake by pakchoi (Brassica chinensis L.) in heavy metal-contaminated soil

Microbial immobilization is a novel and environmentally friendly technology that uses microbes to reduce metal availability in soil and accumulation of heavy metals in plants. We used urea agar plates to isolate urease-producing bacteria from the rhizosphere soil of pakchoi in Cd- and Pb-contaminated farmland and investigated their effects on Cd and Pb accumulation in pakchoi and the underlying mechanisms. The results showed that two urease-producing bacteria, Bacillus megaterium N3 and Serratia liquefaciens H12, were identified by screening. They had higher ability to produce urease (57.5 ms cm^-1 min^-1 OD₆₀₀^-1 and 76.4 ms cm^-1 min^-1 OD₆₀₀^-1, respectively). The two strains allowed for the immobilization of Cd and Pb by extracellular adsorption, bioprecipitation, and increasing the pH (from 6.94 to 7.05-7.09), NH₄⁺ content (69.1%-127%), and NH₄⁺/NO₃^- ratio (from 1.37 to 1.67-2.11), thereby reducing the DTPA-extractable Cd (35.3%-58.8%) and Pb (37.8%-62.2%) contents in the pakchoi rhizosphere soils and the Cd (76.5%-79.7%) and Pb (76.3%-83.5%) contents in the leaves (edible tissue) of pakchoi. The strains were highly resistant to heavy metal toxicity; produced IAA, siderophores and abscisic acid; and increased the NH₄⁺/NO₃^- ratio, which might be related to the two strains protectiing pakchoi against the toxic effect of Cd and Pb and increasing pakchoi biomass. Thus, the results were supposed to strain resources and a theoretical basis for the remediation of Cd- and Pb-contaminated farmlands for the safe production of vegetables.