Biodegradation of low-density polyethylene by Microbulbifer hydrolyticus IRE-31

Biodegradation of untreated plasticizers-free linear low-density polyethylene films by marine bacteria

Polyethylene significantly contributes to marine plastic pollution. This study focuses on isolating bacteria from sea water and microplastic samples collected from the Tyrrhenian Sea and evaluating their ability to degrade virgin plasticizers-free linear low-density polyethylene (LLDPE) films. The isolates grew on the plastic film under aerobic conditions in shaken flasks leading to LLDPE mass losses of up to 2.597 ± 0.971 % after 60 days incubation. Biofilm formation on the film surface was confirmed by adhered protein quantification while film surface erosion and appearance of functional groups were revealed using SEM and FTIR analyses confirming biodegradation capabilities especially for isolates Bacillus velezensis MT9, Vreelandella venusta MT1 and Vreelandellatitanicae MT11. This is the first report on the biodegradation of plasticizers-free non pretreated LLDPE films by marine Bacillus sp. and Vreelandella sp.; most of the LLDPE biodegradation studies have been so far performed on plasticizer containing, pre-treated, or naturally weathered films.

Salinity-induced variations in bacterial composition and co-occurrence patterns within Salicornia-based constructed wetlands in mariculture

Constructed wetlands use vegetation and microorganisms to remove contaminants like nitrogen and phosphorus from water. For mariculture, the impact of salinity on the efficiency of wastewater treatment of wetlands is unneglectable. However, little is known about their impact on the microbiome in constructed wetlands. Here, we set four salinity levels (15, 22, 29, and 36) in Salicornia constructed wetlands, and the experiment was conducted for a period of 72 days. The 15 group exhibited the highest removal rates of nitrogen compounds and phosphate, compared to the other salinity groups, the nosZ gene exhibited significantly higher expression in the 22 group (p < 0.05), indicated that microorganisms in 22 salinity have higher denitrification abilities. The three dominant phyla identified within the microbiomes were Proteobacteria, known for their diverse metabolic capabilities; Cyanobacteria, important for photosynthesis and nitrogen fixation; and Firmicutes, which include many fermenters. The ecological network analysis revealed a 'small world' model, characterized by high interconnectivity and short path lengths between microbial species, and had higher co-occurrence (45.13%) observed in this study comparing to the Erdös-Réyni random one (32.35%). The genus Microbulbifer emerged as the sole connector taxon, pivotal for integrating different microbial communities involved in nitrogen removal. A negative correlation was observed between salinity levels and network complexity, as assessed by the number of connections and diversity of interactions within the microbial community. Collectively, these findings underscore the critical role of microbial community interactions in optimizing nitrogen removal in constructed wetlands, with potential applications in the design and management of such systems for improved wastewater treatment in mariculture.

Polymer degrading marine Microbulbifer bacteria: an un(der)utilized source of chemical and biocatalytic novelty

Microbulbifer is a genus of halophilic bacteria that are commonly detected in the commensal marine microbiomes. These bacteria have been recognized for their ability to degrade polysaccharides and other polymeric materials. Increasingly, Microbulbifer genomes indicate these bacteria to be an untapped reservoir for novel natural product discovery and biosynthetic novelty. In this review, we summarize the distribution of Microbulbifer bacteria, activities of the various polymer degrading enzymes that these bacteria produce, and an up-to-date summary of the natural products that have been isolated from Microbulbifer strains. We argue that these bacteria have been hiding in plain sight, and contemporary efforts into their genome and metabolome mining are going to lead to a proliferation of Microbulbifer-derived natural products in the future. We also describe, where possible, the ecological interactions of these bacteria in marine microbiomes.

Characterization of low-density polyethylene (LDPE) films degraded using bacteria strains isolated from oil-contaminated soil

This study assessed the low-density polyethylene (LDPE) film degradation potential of microorganisms isolated from oil-contaminated soil and also analyzed the morphological and chemical composition of LDPE films after the biodegradation period. The bacteria strains isolated from oil-contaminated soil were standardized and used to degrade the pretreated LDPE films in mineral salt media. Thereafter, they were incubated for 78 days at 37°C in an incubator shaker, and the degraded LDPE films were analyzed quantitatively and qualitatively (using scanning electron microscope (SEM) images and energy dispersal x-ray (EDX)). Isolates A32 and BTT4 amongst other bacteria isolates showed the highest LDPE film degradation activity, with a weight reduction of 71.80% and 89.72% respectively, and were identified using the 16S rRNA sequencing technique. The EDX results showed that LDPE film incubated with A32 has the highest reduction in carbon and nitrogen (23.8% and 44.9% respectively) when compared with the Control. However, LDPE film incubated with BTT4 had an increase in calcium and chlorine (139% and 40% respectively), when compared with the control. Similarly, the SEM images showed the appearance of pinholes, cracks and particles on the surfaces of LDPE films incubated with A32 and BTT4 contrary to the controls. A32 and BTT4 were identified as Proteus mirabilis (Accession number: MN124173.1) and Proteus mirabilis (Accession number: KY027145.1) respectively. Proteus mirabilis showed viable plastic biodegradation potentials and may be useful in the management of plastic waste, leading to a reduction in global plastic waste and a clean environment.

Enhanced biodegradation of microplastic and phthalic acid ester plasticizer: The role of gut microorganisms in black soldier fly larvae

Hermetia illucens larvae are recognized for their ability to mitigate or eliminate contaminants by biodegradation. However, the biodegradation characteristics of microplastics and phthalic acid esters plasticizers, as well as the role of larval gut microorganisms, have remained largely unrevealed. Here, the degradation kinetics of plasticizers, and biodegradation characteristics of microplastics were examined. The role of larval gut microorganisms was investigated. For larval development, microplastics slowed larval growth significantly (P < 0.01), but the effect of plasticizer was not significant. The degradation kinetics of plasticizers were enhanced, resulting in an 8.11 to 20.41-fold decrease in degradation half-life and a 3.34 to 3.82-fold increase in final degradation efficiencies, compared to degradation without larval participation. The depolymerization and biodeterioration of microplastics were conspicuously evident, primarily through a weight loss of 17.63 %-25.52 %, variation of chemical composition and structure, bio-oxidation and bioerosion of microplastic surface. The synergistic effect driven by larval gut microorganisms, each with various functions, facilitated the biodegradation. Specifically, Ignatzschineria, Paenalcaligenes, Moheibacter, Morganella, Dysgonomonas, Stenotrophomonas, Bacteroides, Sphingobacterium, etc., appeared to be the key contributors, owing to their xenobiotic biodegradation and metabolism functions. These findings offered a new perspective on the potential for microplastics and plasticizers biodegradation, assisted by larval gut microbiota.

Mining strategies for isolating plastic-degrading microorganisms

Plastic waste is a growing global pollutant. Plastic degradation by microorganisms has captured attention as an earth-friendly tactic. Although the mechanisms of plastic degradation by bacteria, fungi, and algae have been explored over the past decade, a large knowledge gap still exists regarding the identification, sorting, and cultivation of efficient plastic degraders, primarily because of their uncultivability. Advances in sequencing techniques and bioinformatics have enabled the identification of microbial degraders and related enzymes and genes involved in plastic biodegradation. In this review, we provide an outline of the situation of plastic degradation and summarize the methods for effective microbial identification using multidisciplinary techniques such as multiomics, meta-analysis, and spectroscopy. This review introduces new strategies for controlling plastic pollution in an environmentally friendly manner. Using this information, highly efficient and colonizing plastic degraders can be mined via targeted sorting and cultivation. In addition, based on the recognized rules and plastic degraders, we can perform an in-depth analysis of the associated degradation mechanism, metabolic features, and interactions.

Significance of landfill microbial communities in biodegradation of polyethylene and nylon 6,6 microplastics

Plastic pollution, particularly microplastics, poses a significant environmental challenge. This study aimed to address the urgent need for sustainable solutions to manage plastic waste. The degradation of polyethylene microplastics (PEMPs) and nylon 6,6 microplastics (NMPs) were investigated using bacterial culture isolates, isolated from a municipal landfill site and identified through 16 S rDNA as well as metagenomics techniques.The study demonstrated for the first time along with degradation mechanism. The isolates identified as Achromobacter xylosoxidans and mixed culture species in dominance of Pulmonis sp. were used to degrade PEMPs and NMPs. Achromobacter xylosoxidans reduced microplastic's dry weight by 26.7% (PEMPs) and 21.3% (NMPs) in 40 days, while the mixed culture achieved weight reductions of 19.3% (PEMPs) and 20% (NMPs). The release of enzymes, laccase and peroxidases revealed C-C bond cleavage and reduced polymer chain length. The thermal studies (TGA and DSC) revealed changes in the thermal stability and transition characteristics of microplastics. The structural alterations on PEMPs and NMPs were recorded by FTIR analysis. Byproducts such as alkanes, esters, aromatic compounds and carboxylic acids released were identified by GC-MS. These results suggest the effectiveness of bacterial isolates in degrading PEMPs and NMPs, with potential for sustainable plastic waste management solutions.

Degradation of low-density polyethylene by the bacterium Rhodococcus sp. C-2 isolated from seawater

Low-density polyethylene (LDPE), which accounts for 20% of the global plastic production, is discharged in great quantities into the ocean, threatening marine life and ecosystems. Marine microorganisms have previously been reported to degrade LDPE plastics; however, the exploration of strains and enzymes that degrade LDPE is still limited. Here, an LDPE-degrading bacterium was isolated from seawater of the Changjiang Estuary, China and identified as Rhodococcus sp. C-2, the relative abundance of which was dramatically enhanced during PE-degrading microbial enrichment. The strain C-2 exhibited the degradation of LDPE films, leading to their morphological deterioration, reduced hydrophobicity and tensile strength, weight loss, as well as the formation of oxygen-containing functional groups in short-chain products. Sixteen bacterial enzymes potentially involved in LDPE degradation were screened using genomic, transcriptomic, and degradation product analyses. Thereinto, the glutathione peroxidase GPx with exposed active sites catalyzed the LDPE depolymerization with the cooperation of its dissociated superoxide anion radicals. Furthermore, an LDPE degradation model involving multiple enzymes was proposed. The present study identifies a novel PE-degrading enzyme (PEase) for polyethylene bioremediation and promotes the understanding of LDPE degradation.

Biofilm formation promoted biodegradation of polyethylene in Gordonia polyisoprenivorans B251 isolated from bacterial enrichment acclimated by hexadecane for two years

Polyethylene (PE) mulch films have been widely used in agriculture and led to a significant pollution in cultivated soils. It is desirable to develop the sustainable method for the degradation of PE. As an environment friendly approach, microbial or enzymatic degradation of PE could meet this demanding. Thus, more microbial strains are required for illustrating biodegrading pathway and developing efficient biological method. In this study, Gordonia polyisoprenivorans B251 capable of degrading PE was isolated from bacterial enrichment with hexadecane as a sole carbon source for two years, in which genus Gordonia had dominated. As revealed by microbial growth curve, the strain B251 had the highest growth rate than other tested strains in the mediums either with hexadecane or PE particles as sole carbon source. The formation of biofilms in both enriched culture and G. polyisoprenivorans B251 pure culture attached to PE film was observed. The capability for PE degradation of individual strain was screened by 30-day incubation with PE film and confirmed by the presence of hydroxyl, carbonyl, carbon-carbon double bond and ether groups in FT-IR analysis and cracks on the surface of PE film observed by scanning electron microscopy (SEM). Therefore, Gordonia polyisoprenivorans, reported as their degradation of environmental contaminants in previous study, were also identified in current study as a candidate for polyethylene biodegradation.

Recent developments in bio-based polyethylene: Degradation studies, waste management and recycling

Nowadays, the tendency to replace conventional fossil-based plastics is increasing considerably; there is a growing trend towards alternatives that involve the development of plastic materials derived from renewable sources, which are compostable and biodegradable. Indeed, only 1.5 % of whole plastic production is part of the small bioplastics market, even when these materials with a partial or full composition from biomass are rapidly expanding. A very interesting field of investigation is currently being developed in which the disposal and processing of the final products are evaluated in terms of reducing environmental harm. This review presents a compilation of polyethylene (PE) types, their uses, and current problems in the waste management of PE and recycling. Particularly, this review is based on the capabilities to synthesize bio-based PE from natural and renewable sources as a replacement for the raw material derived from petroleum. In addition to recent studies in degradation on different types of PE with weight loss ranges from 1 to 47 %, the techniques used and the main changes observed after degradation. Finally, perspectives are presented in the manuscript about renewable and non-renewable polymers, depending on the non-degradable, biodegradable, and compostable behavior, including composting recent studies in PE. In addition, it contributes to the 3R approaches to responsible waste management of PE and advancement towards an environmentally friendly PE.

Wood decay fungi show enhanced biodeterioration of low-density polyethylene in the absence of wood in culture media

The involvement of microorganisms in low-density polyethylene (LDPE) degradation is widely studied across the globe. Even though soil, landfills, and garbage dumps are reported to be promising niches for such organisms, recently the involvement of wood decay fungi in polyethylene degradation is highlighted. In light of this, 50 fungal samples isolated from decaying hardwoods were assessed for their wood degradation ability and for their depolymerization enzymatic activities. For the LDPE deterioration assay, 22 fungal isolates having wood decay ability and de-polymerization enzymatic activities were selected. Fungal cultures with LDPE sheets (2 cm x 10 cm x 37.5 μm) were incubated in the presence and in the absence of wood as the carbon source (C) for 45 days. Degradation was measured by weight loss, changes in tensile properties, reduction in contact angle, changes of functional groups in Fourier-transform infrared spectroscopy, Scanning electron microscopic imaging, and CO2 evolution by strum test. Among the isolates incubated in the absence of wood, Phlebiopsis flavidoalba out-performed the other fungal species showing the highest percentage of weight reduction (23.68 ± 0.34%), and the lowest contact angle (64.28° ± 5.01). Biodegradation of LDPE by P. flavidoalba was further supported by 46.79 ± 0.67% of the mass loss, and 3.07 ± 0.13% of CO2 emission (mg/L) in the strum test. The most striking feature of the experiment was that all the isolates showed elevated degradation of LDPE in the absence of wood than that in the presence of wood. It is clear that in the absence of a preferred C source, wood decay fungi thrive to utilize any available C source (LDPE in this case) showing the metabolic adaptability of fungi to survive under stressful conditions. A potential mechanism for LDPE degradation is also proposed.

A computational approach to optimising laccase-mediated polyethylene oxidation through carbohydrate-binding module fusion

Plastic pollution is a major global concern to the health and wellbeing of all terrestrial and marine life. However, no sustainable method for waste management is currently viable. This study addresses the optimisation of microbial enzymatic polyethylene oxidation through rational engineering of laccases with carbohydrate-binding module (CBM) domains. An explorative bioinformatic approach was taken for high-throughput screening of candidate laccases and CBM domains, representing an exemplar workflow for future engineering research. Molecular docking simulated polyethylene binding whilst a deep-learning algorithm predicted catalytic activity. Protein properties were examined to interpret the mechanisms behind laccase-polyethylene binding. The incorporation of flexible GGGGS(x3) hinges were found to improve putative polyethylene binding of laccases. Whilst CBM1 family domains were predicted to bind polyethylene, they were suggested to detriment laccase-polyethylene associations. In contrast, CBM2 domains reported improved polyethylene binding and may thus optimise laccase oxidation. Interactions between CBM domains, linkers, and polyethylene hydrocarbons were heavily reliant on hydrophobicity. Preliminary polyethylene oxidation is considered a necessity for consequent microbial uptake and assimilation. However, slow oxidation and depolymerisation rates inhibit the large-scale industrial implementation of bioremediation within waste management systems. The optimised polyethylene oxidation of CBM2-engineered laccases represents a significant advancement towards a sustainable method of complete plastic breakdown. Results of this study offer a rapid, accessible workflow for further research into exoenzyme optimisation whilst elucidating mechanisms behind the laccase-polyethylene interaction.

Microbiological Characterization of the Biofilms Colonizing Bioplastics in Natural Marine Conditions: A Comparison between PHBV and PLA

Biodegradable polymers offer a potential solution to marine pollution caused by plastic waste. The marine biofilms that formed on the surfaces of poly(lactide acid) (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were studied. Bioplastics were exposed for 6 months to marine conditions in the Mediterranean Sea, and the biofilms that formed on their surfaces were assessed. The presence of specific PLA and PHBV degraders was also studied. PHBV showed extensive areas with microbial accumulations and this led to higher microbial surface densities than PLA (4.75 vs. 5.16 log CFU/cm²). Both polymers' surfaces showed a wide variety of microbial structures, including bacteria, fungi, unicellular algae and choanoflagellates. A high bacterial diversity was observed, with differences between the two polymers, particularly at the phylum level, with over 70% of bacteria affiliated to three phyla. Differences in metagenome functions were also detected, revealing a higher presence of proteins involved in PHBV biodegradation in PHBV biofilms. Four bacterial isolates belonging to the Proteobacteria class were identified as PHBV degraders, demonstrating the presence of species involved in the biodegradation of this polymer in seawater. No PLA degraders were detected, confirming its low biodegradability in marine environments. This was a pilot study to establish a baseline for further studies aimed at comprehending the marine biodegradation of biopolymers.

Microbial colonization and degradation of marine microplastics in the plastisphere: A review

Marine microplastic pollution is a growing problem for ecotoxicology that needs to be resolved. In particular, microplastics may be carriers of "dangerous hitchhikers," pathogenic microorganisms, i.e., Vibrio. Microplastics are colonized by bacteria, fungi, viruses, archaea, algae and protozoans, resulting in the biofilm referred to as the "plastisphere." The microbial community composition of the plastisphere differs significantly from those of surrounding environments. Early dominant pioneer communities of the plastisphere belong to primary producers, including diatoms, cyanobacteria, green algae and bacterial members of the Gammaproteobacteria and Alphaproteobacteria. With time, the plastisphere mature, and the diversity of microbial communities increases quickly to include more abundant Bacteroidetes and Alphaproteobacteria than natural biofilms. Factors driving the plastisphere composition include environmental conditions and polymers, with the former having a much larger influence on the microbial community composition than polymers. Microorganisms of the plastisphere may play key roles in degradation of plastic in the oceans. Up to now, many bacterial species, especially Bacillus and Pseudomonas as well as some polyethylene degrading biocatalysts, have been shown to be capable of degrading microplastics. However, more relevant enzymes and metabolisms need to be identified. Here, we elucidate the potential roles of quorum sensing on the plastic research for the first time. Quorum sensing may well become a new research area to understand the plastisphere and promote microplastics degradation in the ocean.

Assembly strategies for polyethylene-degrading microbial consortia based on the combination of omics tools and the "Plastisphere"

Numerous microorganisms and other invertebrates that are able to degrade polyethylene (PE) have been reported. However, studies on PE biodegradation are still limited due to its extreme stability and the lack of explicit insights into the mechanisms and efficient enzymes involved in its metabolism by microorganisms. In this review, current studies of PE biodegradation, including the fundamental stages, important microorganisms and enzymes, and functional microbial consortia, were examined. Considering the bottlenecks in the construction of PE-degrading consortia, a combination of top-down and bottom-up approaches is proposed to identify the mechanisms and metabolites of PE degradation, related enzymes, and efficient synthetic microbial consortia. In addition, the exploration of the plastisphere based on omics tools is proposed as a future principal research direction for the construction of synthetic microbial consortia for PE degradation. Combining chemical and biological upcycling processes for PE waste could be widely applied in various fields to promote a sustainable environment.

Microbial degradation of virgin polyethylene by bacteria isolated from a landfill site

Abstract

In this study we evaluate the extent of degradation of high-density polyethylene by bacterial isolates obtained from landfill. The microorganisms are isolated from plastic wastes deposited in the landfill for 2–3 years and 17 years. Experiments are conducted under laboratory conditions to degrade virgin high-density polyethylene used in the manufacture of packaging materials. Gravimetric and GC–MS analyses are performed to describe polyethylene decomposition. Of all the bacterial isolates tested, the degradation of polyethylene by Bacillus cereus is the highest, 1.78%, based on weight loss. On the other hand, degradation by Pseudomonas tuomurensis is 0.3%. Degradation products are detected, confirming the progressive degradation of the plastic. The hydrocarbons with single and double bonds are observed most frequently. Our study provides insight into the microbial biodegradation of polyethylene in the environment and contributes to the understanding of the biodegradation processes that may occur in landfills and their progress.

Article Highlights

Environmental toxicity and decomposition of polyethylene

In the more than 100 years since the invention of plastics, various plastic polymers have been developed that exhibit different characteristics and have been widely used in production and life. In 2020 alone, nearly 400 million tons of plastics were produced globally. However, while plastic such as polyethylene brings us convenience, it also threatens environmental sustainability and human health. Due to insufficient recycling efficiency, millions of tons of polyethylene pollutants accumulate in terrestrial or marine environments each year. Polyethylene is elastic, chemically stable, and non-biodegradable, and the traditional disposal methods include landfilling and incineration. These methods are costly, unsustainable, and further increase the burden on the environment. Therefore, recent research has increasingly focused on the biodegradation of polyethylene. In this work, we briefly summarized polyethylene's properties and environmental toxicity. We also reviewed the recent advances in the biodegradation of polyethylene with a summary of traditional abiotic methods. Finally, we proposed a brief research direction in polyethylene study with the aspect of environmental toxicology and industrial applications of decomposition technology.

Effect of landfill age on the physical and chemical characteristics of waste plastics/microplastics in a waste landfill sites

The landfills store a lot of waste plastics, thus it has been confirmed a main source for the occurrence of plastics/microplastic. Although there are some reports that microplastics (MPs) can generate in leachate and refuse samples from the landfill, it exist many blanks for the evolution of physical and chemical characteristics of waste plastics and microplastics with different landfill age. To explore the process that large pieces of plastic are fractured into microplastics, the waste plastics with landfill age from 7 to 30 years are surveyed from a typical landfill in Shanghai. The results show that PE and PP are the most common types of landfilling plastics, and their chemical composition also have changed due to the creation of CO and -OH. Moreover, the crystallinity is affected by plastic type and landfill age. The crystallinity of PP increased from 24.9% to 56.8%, but for PE, the crystallinity decreased from 55.6% to 20.8%. The mechanical properties of waste plastics were reduced significantly, which may be caused by changes in carbon-chain molecules. Al, Ti, Co, and other metal elements were detected on the plastic surface. The hydrophobic behavior of waste plastic is constantly decreasing (102.2°-80.1°) under long-term landfilling. By investigating the changes in the physical and chemical characteristics of waste plastics with different landfill age can shed light upon the process of environmental weathering of waste plastics. This provide theoretical guidance for reducing the transport of microplastics to the environment.

Feasible Cluster Model Method for Simulating the Redox Potentials of Laccase CueO and Its Variant

Laccases are regarded as versatile green biocatalysts, and recent scientific research has focused on improving their redox potential for broader industrial and environmental applications. The density functional theory (DFT) quantum mechanics approach, sufficiently rigorous and efficient for the calculation of electronic structures, is conducted to better comprehend the connection between the redox potential and the atomic structural feature of laccases. According to the crystal structure of wild type laccase CueO and its variant, a truncated miniature cluster model method was established in this research. On the basic of thermodynamic cycle, the overall Gibbs free energy variations before and after the one-electron reduction were calculated. It turned out that the trends of redox potentials to increase after variant predicted by the theoretical calculations correlated well with those obtained by experiments, thereby validating the feasibility of this cluster model method for simulating the redox potentials of laccases.

Microbial biodegradation of plastics: Challenges, opportunities, and a critical perspective

The abundance of synthetic polymers has increased due to their uncontrolled utilization and disposal in the environment. The recalcitrant nature of plastics leads to accumulation and saturation in the environment, which is a matter of great concern. An exponential rise has been reported in plastic pollution during the corona pandemic because of PPE kits, gloves, and face masks made up of single-use plastics. The physicochemical methods have been employed to degrade synthetic polymers, but these methods have limited efficiency and cause the release of hazardous metabolites or by-products in the environment. Microbial species, isolated from landfills and dumpsites, have utilized plastics as the sole source of carbon, energy, and biomass production. The involvement of microbial strains in plastic degradation is evident as a substantial amount of mineralization has been observed. However, the complete removal of plastic could not be achieved, but it is still effective compared to the preexisting traditional methods. Therefore, microbial species and the enzymes involved in plastic waste degradation could be utilized as eco-friendly alternatives. Thus, microbial biodegradation approaches have a profound scope to cope with the plastic waste problem in a cost-effective and environmental-friendly manner. Further, microbial degradation can be optimized and combined with physicochemical methods to achieve substantial results. This review summarizes the different microbial species, their genes, biochemical pathways, and enzymes involved in plastic biodegradation.

A Bibliometric Analysis of Research Trends in Biodegradation of Plastics

The rapid growth in the production and application of plastic globally has resulted in plastic pollution with a negative impact on the environment, especially the marine ecosystem. One main disadvantage in the majority of polymers is disposal after a useful life span. Non-degradable polymers create severe difficulty in plastic waste management that might end up in landfills or wash into the ocean. The biodegradation of plastic waste is one solution to this critical problem of pollution. Hence, there is a need to consider the advancement of research in this subject area, in pursuit of a way out of plastic pollution. Thus, this study was designed to map the biodegradation of plastic-related research from 2000 to 2021. Statistical information on the topic was recovered from the Web of Science Core Collection and analysed using the bibliometrix package in RStudio statistical software, while data visualisation was conducted via VOSviewer. Our evaluation indicated that the amount of research on the biodegradation of plastic increased over the last decade, and the annual growth rate of publication trends was 11.84%. The study revealed that 1131 authors wrote the 290 analysed documents, with a collaboration index of 4.04. Cooper DG (n = 11) was the most relevant author, McGill University (n = 21) was the most active university, and the Journal of Polymers and the Environment (n = 19) the leading journal. The outcome of this study can guide prospective research and offer vital information for improving the management of plastic waste.

Exposure of Goniopora columna to polyethylene microplastics (PE-MPs): Effects of PE-MP concentration on extracellular polymeric substances and microbial community

Although the pollution of coral reefs by microplastics (MPs) is an environmental problem of global significance, the effects of MP concentration on scleractinian corals remain largely underexplored. Herein, we exposed a representative scleractinian coral (Goniopora columna) to different concentrations (5-300 mg L^-1) of polyethylene microplastics (PE-MPs; 40-48 μm) over seven days and evaluated the changes in microbial community and extracellular polymeric substances (EPS) using fluorescence excitation-emission matrix spectroscopy and amplicon sequence variants (ASV). At a PE-MP concentration of 300 mg L^-1, the relative abundance of Bacillus (Firmicutes phylum) and Ruegeria (Proteobacteria phylum) in PE-MP-associated EPS increased and decreased, respectively, while the effects of exposure depended on the particle size of the extracellular polymeric substance (EPS)-based matrix and the humification index. Humic- and fulvic-like substances were identified as critical EPS components produced by microbial activity. The results have shed new insights into short-term responses of G. columna during exposure to different PE-MP concentrations and reveal important coral-MP-microbiome interactions in coral reef ecosystems. Results demonstrated that the coral-MPs interactions should be further evaluated to gain a deeper understanding of the underlying ecotoxicological risks.

Biodegradation of polyethylene and polystyrene: From microbial deterioration to enzyme discovery

The global production of plastics has continuously been soaring over the last decades due to their extensive use in our daily life and in industries. Although synthetic plastics offer great advantages from packaging to construction and electronics, their low biodegradability induce serious plastic pollution that damage the environment, human health and make irreversible changes in the ecological cycle. In particular, plastics containing only carbon-carbon (C-C) backbone are less susceptible to degradation due to the lack of hydrolysable groups. The representative polyethylene (PE) and polystyrene (PS) account for about 40% of the total plastic production. Various chemical and biological processes with great potential have been developed for plastic recycle and reuse, but biodegradation seems to be the most attractive and eco-friendly method to combat this growing environmental problem. In this review, we first summarize the current advances in PE and PS biodegradation, including isolation of microbes and potential degrading enzymes from different sources. Next, the state-of-the-art techniques used for evaluating and monitoring PE and PS degradation, the scientific toolboxes for enzyme discovery as well as the challenges and strategies for plastic biodegradation are intensively discussed. In return, it inspires a further technological exploration in expanding the diversity of species and enzymes, disclosing the essential pathways and developing new approaches to utilize plastic waste as feedstock for recycling and upcycling.

Mechanism-Based Design of Efficient PET Hydrolases

Polyethylene terephthalate (PET) is the most widespread synthetic polyester, having been utilized in textile fibers and packaging materials for beverages and food, contributing considerably to the global solid waste stream and environmental plastic pollution. While enzymatic PET recycling and upcycling have recently emerged as viable disposal methods for a circular plastic economy, only a handful of benchmark enzymes have been thoroughly described and subjected to protein engineering for improved properties over the last 16 years. By analyzing the specific material properties of PET and the reaction mechanisms in the context of interfacial biocatalysis, this Perspective identifies several limitations in current enzymatic PET degradation approaches. Unbalanced enzyme-substrate interactions, limited thermostability, and low catalytic efficiency at elevated reaction temperatures, and inhibition caused by oligomeric degradation intermediates still hamper industrial applications that require high catalytic efficiency. To overcome these limitations, successful protein engineering studies using innovative experimental and computational approaches have been published extensively in recent years in this thriving research field and are summarized and discussed in detail here. The acquired knowledge and experience will be applied in the near future to address plastic waste contributed by other mass-produced polymer types (e.g., polyamides and polyurethanes) that should also be properly disposed by biotechnological approaches.

Unraveling the plastic degradation potentials of the plastisphere-associated marine bacterial consortium as a key player for the low-density polyethylene degradation

The omnipresent accumulation and non-degradable nature of plastics in the environment are posing an ever-increasing ecological threat. In this study, a total of 97 bacteria were isolated from macroplastic debris collected from the coastal environments of Andaman Island. The isolates were screened for LDPE degradation potential and were identified based on phenotypic, biochemical, and molecular characterization. 16S rDNA-based identification revealed that three-three isolates of each belong to the genus Oceanimonas and Vibrio, two were closely related to the genus Paenibacillus whereas, one-one was associated with the genus Shewanella, Rheinheimera, and Bacillus, respectively. A bacterial consortium was formulated using the top four isolates based on their individual LDPE degradation potentials. A significant increase (p < 0.05) in the mean LDPE degradation (47.07 ± 6.67% weight-loss) and change in thickness was observed after 120 days of incubation. FTIR spectrum, ¹³C NMR, and TG-DSC analyses demonstrated changes in the LDPE sheets' functional groups, crystallinity, and in thermal properties after 120 days of incubation. The SEM and AFM images confirmed bacterial attachments, an increase in surface roughness and deformities on LDPE sheets. This study reports a bacterial consortium that can efficiently degrade the plastics and can be used in providing eco-friendly mitigation of plastic waste.

Rapid colonization and biodegradation of untreated commercial polyethylene wrap by a new strain of Bacillus velezensis C5

Biodegradation could be a potential alternative solution to polyethylene (PE) pollution. However, its hydrophobic surface and long carbon chains make extremely low biodegradation efficiency. In this study, we screened a novel potential bacterial strain C5 (CGMCC number: 1.18715) for low-density polyethylene (LDPE) biodegrading from landfills. The strain was identified as Bacillus velezensis according to its 16S rRNA sequence. The contact angle analysis indicated that C5 could rapidly form biofilm on untreated LDPE which resulted in contact angles decreasing from 100° to 54° over 7 d. After the LDPE film incubated with C5 for 90 d, the thickness and weight of LDPE film decreased by 26% and 8.01%, respectively. Besides, the biotreated PE film was found with increases in weight-averaged molecular weight by 29.8%, suggesting low molar mass chains were consumed. C₂₄-C₂₉ n-alkanes were detected in the biodegradation products, which proved the depolymerization of LDPE. Combined with the genome mining results, a possible biofilm-aided degrading mechanism was proposed and might involve key enzymes, such as laccase, cytochrome P450 and propionyl-CoA carboxylase, which could constitute a multienzyme system for the co-catalytic degradation of LDPE waste.

A minireview on the bioremediative potential of microbial enzymes as solution to emerging microplastic pollution

Accumulating plastics in the biosphere implicates adverse effects, raising serious concern among scientists worldwide. Plastic waste in nature disintegrates into microplastics. Because of their minute appearance, at a scale of <5 mm, microplastics easily penetrate different pristine water bodies and terrestrial niches, posing detrimental effects on flora and fauna. The potential bioremediative application of microbial enzymes is a sustainable solution for the degradation of microplastics. Studies have reported a plethora of bacterial and fungal species that can degrade synthetic plastics by excreting plastic-degrading enzymes. Identified microbial enzymes, such as IsPETase and IsMHETase from Ideonella sakaiensis 201-F6 and Thermobifida fusca cutinase (Tfc), are able to depolymerize plastic polymer chains producing ecologically harmless molecules like carbon dioxide and water. However, thermal stability and pH sensitivity are among the biochemical limitations of the plastic-degrading enzymes that affect their overall catalytic activities. The application of biotechnological approaches improves enzyme action and production. Protein-based engineering yields enzyme variants with higher enzymatic activity and temperature-stable properties, while site-directed mutagenesis using the Escherichia coli model system expresses mutant thermostable enzymes. Furthermore, microalgal chassis is a promising model system for "green" microplastic biodegradation. Hence, the bioremediative properties of microbial enzymes are genuinely encouraging for the biodegradation of synthetic microplastic polymers.

Isolation of Microbulbifer sp. SOL66 with High Polyhydroxyalkanoate-Degrading Activity from the Marine Environment

Having the advantage of eco-friendly decomposition, bioplastics could be used to replace petroleum-based plastics. In particular, poly(3-hydroxybutyrate) (PHB) is one of the most commercialized bioplastics, however, necessitating the introduction of PHB-degrading bacteria for its effective disposal. In this study, Microbulbifer sp. SOL66 (94.18% 16S rRNA with similarity to Microbulbifer hydrolyticus) demonstrated the highest degradation activity among five newly screened Microbulbifer genus strains. Microbulbifer sp. SOL66 showed a rapid degradation yield, reaching 98% in 4 days, as monitored by laboratory scale, gas chromatography-mass spectrometry, scanning electron microscopy, gel permeation chromatography, and Fourier transform infrared spectroscopy. The PHB film was completely degraded within 7 days at 37 °C in the presence of 3% NaCl. When 1% xylose and 0.4% ammonium sulfate were added, the degradation activity increased by 17% and 24%, respectively. In addition, this strain showed biodegradability on pellets of poly(3-hydroxybutyrate-co-4-hydroxybutyrate), as confirmed by weight loss and physical property changes. We confirmed that Microbulbifer sp. SOL66 has a great ability to degrade PHB, and has rarely been reported to date.

MIXed plastics biodegradation and UPcycling using microbial communities: EU Horizon 2020 project MIX-UP started January 2020

This article introduces the EU Horizon 2020 research project MIX-UP, "Mixed plastics biodegradation and upcycling using microbial communities". The project focuses on changing the traditional linear value chain of plastics to a sustainable, biodegradable based one. Plastic mixtures contain five of the top six fossil-based recalcitrant plastics [polyethylene (PE), polyurethane (PUR), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS)], along with upcoming bioplastics polyhydroxyalkanoate (PHA) and polylactate (PLA) will be used as feedstock for microbial transformations. Consecutive controlled enzymatic and microbial degradation of mechanically pre-treated plastics wastes combined with subsequent microbial conversion to polymers and value-added chemicals by mixed cultures. Known plastic-degrading enzymes will be optimised by integrated protein engineering to achieve high specific binding capacities, stability, and catalytic efficacy towards a broad spectrum of plastic polymers under high salt and temperature conditions. Another focus lies in the search and isolation of novel enzymes active on recalcitrant polymers. MIX-UP will formulate enzyme cocktails tailored to specific waste streams and strives to enhance enzyme production significantly. In vivo and in vitro application of these cocktails enable stable, self-sustaining microbiomes to convert the released plastic monomers selectively into value-added products, key building blocks, and biomass. Any remaining material recalcitrant to the enzymatic activities will be recirculated into the process by physicochemical treatment. The Chinese-European MIX-UP consortium is multidisciplinary and industry-participating to address the market need for novel sustainable routes to valorise plastic waste streams. The project's new workflow realises a circular (bio)plastic economy and adds value to present poorly recycled plastic wastes where mechanical and chemical plastic recycling show limits.

Quantum Mechanical Investigation of the Oxidative Cleavage of the C-C Backbone Bonds in Polyethylene Model Molecules

Recalcitrant plastic waste has caused serious global ecological problems. There is an urgent need to develop environmentally friendly and efficient methods for degrading the highly stable carbon skeleton structure of plastics. To that end, we used a quantum mechanical calculation to thoroughly investigate the oxidative scission of the carbon-carbon (C–C) backbone in polyethylene (PE). Here, we studied the reaction path of C–C bond oxidation via hydroxyl radical in PE. The flexible force constants and fuzzy bond orders of the C–C bonds were calculated in the presence of one or more carbocations in the same PE carbon chain. By comparison, the strength of the C–C bond decreased when carbocation density increased. However, the higher the density of carbocations, the higher the total energy of the molecule and the more difficult it was to be generated. The results revealed that PE oxidized to alcohol and other products, such as carboxylic acid, aldehyde and ketone, etc. Moreover, the presence of carbocations was seen to promote the cleavage of C–C backbones in the absence of oxygen.

Degradation of conventional plastic wastes in the environment: A review on current status of knowledge and future perspectives of disposal

Accumulation of plastic wastes has been recently recognized as one of the most critical environmental challenges, affecting all life forms, natural ecosystems and economy, worldwide. Under this threat, finding alternative environmentally-friendly solutions, such as biodegradation instead of traditional disposal, is of utmost importance. However, up to date, there is limited knowledge on plastic biodegradation mechanisms and efficiency. From this point of view, the purpose of this review is to highlight the negative effects of the accumulation of the most conventional plastic waste (polyethylene, polypropylene, polystyrene, polyvinylchloride, polyethylene terephthalate and polyurethane) on the environment and to present their degradability potential through abiotic and biotic processes. Furthermore, the ability of different microbial species for degradation of these polymers is thoroughly discussed. The present review also addresses the contribution of invertebrates, such as insects, in plastic degradation process, highlighting the vital role that they could play in the future. In total, a schematic pathway of an innovative approach to improve the disposal of plastic wastes is proposed, with view to establishing an effective and sustainable practice for plastic waste management.

Synergistic biodegradation of poly(ethylene terephthalate) using Microbacterium oleivorans and Thermobifida fusca cutinase

Poly(ethylene terephthalate) (PET) is a major source of plastic pollution. Biodegradation technologies are of paramount interest in reducing or recycling PET waste. In particular, a synergistic microbe-enzyme treatment may prove to be a promising approach. In this study, a synergistic system composed of Microbacterium oleivorans JWG-G2 and Thermobifida fusca cutinase (referred to as TfC) was employed to degrade bis(hydroxyethyl) terephthalate (BHET) oligomers and a high crystalline PET film. A novel degradation product that was obtained by M. oleivorans JWG-G2 treatment alone was identified as ethylene glycol terephthalate (EGT). With the addition of TfC as a second biocatalyst, the highest synergy degrees for BHET oligomers and PET film degradation were 2.79 and 2.26, respectively. The largest amounts of terephthalic acid (TPA) and mono(2-hydroxyethyl) terephthalate (MHET) (47 nM and 330 nM, respectively) were detected after combined treatment of PET film with M. oleivorans JWG-G2 at 5 × 10³ μL/cm² and TfC at 120 μg/cm², and the degree of PET film surface destruction was more significant than those produced by each treatment alone. The presence of extracellular PET hydrolases in M. oleivorans JWG-G2, including three carboxylesterases, an esterase and a lipase, was predicted by whole genome sequencing analysis, and a predicted PET degradation pathway was proposed for the synergistic microbe-enzyme treatment. The results indicated that synergistic microbe-enzyme treatment may serve as a potentially promising tool for the future development of effective PET degradation. KEY POINTS: • An ecofriendly synergistic microbe-enzyme PET degradation system operating at room temperature was first introduced for degrading PET. • A novel product (EGT) was first identified during PET degradation. • Potential PET hydrolases in M. oleivorans JWG-G2 were predicted by whole genome sequencing analysis.

Critical evaluation of biodegradation studies on synthetic plastics through a systematic literature review

Increasing amounts of plastic waste in the environment and their fragmentation into smaller particles known as microplastics (particles, <5mm) have raised global concerns due to their persistency in the environment and their potential to act as vectors for harmful substances or pathogenic microorganisms. One possible solution to this problem is biodegradation of plastics by microorganisms. However, the scientific information on plastic-degrading microorganisms is scattered across different scientific publications. We conducted a systematic literature review (SLR) with predefined criteria using the online databases of Scopus and Web of Science to find papers on bacterial biodegradation of synthetic petroleum-based polymers. The aims of this SLR were to provide an updated list of all of the currently known bacteria claimed to biodegrade synthetic plastics, to determine and define the best methods to assess biodegradation, to critically evaluate the existing studies, and to propose directions for future research on polymer biodegradation in support of more rapid development of biodegradation technologies. Most of the bacteria identified here from the 145 reviewed papers belong to the phyla Proteobacteria, Firmicutes and Actinobacteria, and most were isolated from contaminated sites, such as landfill sites. Just under a half of the studies (44%) investigated the biodegradability of polyethylenes and derivates, particularly low-density polyethylenes. The methods used to monitor the biodegradation were mainly scanning electron microscopy and Fourier-transform infrared spectroscopy. We propose that: (1) future research should focus on biodegradation of microplastics arising from the most common pollutants (e.g. polyethylenes); (2) bacteria should be isolated from environments that are permanently contaminated with plastics; and (3) a combination of different observational methods should be used to confirm bacterial biodegradation of these plastics. Finally, when reporting, researchers need to follow standard protocols and include all essential information needed for repetition of the experiments by other research groups.

Biodegradation of Unpretreated Low-Density Polyethylene (LDPE) by Stenotrophomonas sp. and Achromobacter sp., Isolated From Waste Dumpsite and Drilling Fluid

Exploring the catabolic repertoire of natural bacteria for biodegradation of plastics is one of the priority areas of biotechnology research. Low Density Polyethylene (LDPE) is recalcitrant and poses serious threats to our environment. The present study explored the LDPE biodegradation potential of aerobic bacteria enriched from municipal waste dumpsite and bentonite based drilling fluids from a deep subsurface drilling operation. Considerable bacterial growth coupled with significant weight loss of the LDPE beads (∼8%), change in pH to acidic condition and biofilm cell growth around the beads (CFU count 10⁵-10⁶/cm²) were noted for two samples (P and DF2). The enriched microbial consortia thus obtained displayed high (65-90%) cell surface hydrophobicity, confirming their potential toward LDPE adhesion as well as biofilm formation. Two LDPE degrading bacterial strains affiliated to Stenotrophomonas sp. and Achromobacter sp. were isolated as pure culture from P and DF2 enrichments. 16S rRNA gene sequences of these isolates indicated their taxonomic novelty. Further biodegradation studies provided strong evidence toward the LDPE metabolizing ability of these two organisms. Atomic Fore Microscopy (AFM) and Scanning Electron Microscopy (SEM) revealed considerable damage (in terms of formation of cracks, grooves, etc.) on the micrometric surface of the LDPE film. Analysis of the average roughness (Ra), root mean square roughness (Rq), average height (Rz), maximum peak height (Rp), and maximum valley depth (Rv) (nano-roughness parameters) through AFM indicated 2-3 fold increase in nano-roughness of the LDPE film. FTIR analysis suggested incorporation of alkoxy (1000-1090 cm^-1), acyl (1220 cm^-1), nitro (1500-1600 cm^-1), carbonyl (1720 cm^-1) groups into the carbon backbone, formation of N-O stretching (1360 cm^-1) and chain scission (905 cm^-1) in the microbially treated LDPEs. Increase in carbonyl index (15-20 fold), double bond index (1.5-2 fold) and terminal double bond index (30-40 fold) confirmed that biodegraded LDPEs had undergone oxidation, vinylene formation and chain scission. The data suggested that oxidation and dehydrogenation could be the key steps allowing formation of low molecular weight products suitable for their further mineralization by the test bacteria. The study highlighted LDPE degrading ability of natural bacteria and provided the opportunity for their development in plastic remediation process.