Environmental applications of microbial extracellular polymeric substance (EPS): A review

Anaerobic fermentation for hydrogen production and tetracycline degradation: Biodegradation mechanism and microbial community succession

The misuse and continues discharge of antibiotics can cause serious pollution, which is urgent to take steps to remit the environment pollution. In this study, anaerobic bacteria isolated from the aeration tank of a local sewage treatment plant were employed to investigate hydrogen production and tetracycline (TC) degradation during anaerobic fermentation. Results indicate that low concentrations of TC enhanced hydrogen production, increasing from 366 mL to a maximum of 480 mL. This increase is attributed to stimulated hydrolysis and acidogenesis, coupled with significant inhibition of homoacetogenesis. Furthermore, the removal of TC, facilitated by adsorption and biodegradation, exceeded 90 %. During the fermentation process, twenty-one by-products were identified, leading to the proposal of four potential degradation pathways. Analysis of the microbial community revealed shifts in diversity and a decrease in the abundance of hydrogen-producing bacteria, whereas bacteria harboring tetracycline resistance genes became more prevalent. This study provides a possibility to treat tetracycline-contaminated wastewater and to produce clean energy simultaneously by anaerobic fermentation.

Unearthing the soil-bacteria nexus to enhance potassium bioavailability for global sustainable agriculture: A mechanistic preview

Established as a plant macronutrient, potassium (K) substantially bestows plant growth and thus, global food production. It is absorbed by plants as potassium cation (K+) from soil solution, which is enriched through slow-release from soil minerals or addition of soluble fertilizers. Contribution of bioavailable K+ from soil is usually insignificant (< 2 %), although the earth's crust is rich in K-bearing minerals. However, K is fixed largely in interlayer spaces of K-bearing minerals, which can be released by K-solubilizing bacteria (KSB) such as Bacillus, Pseudomonas, Enterobacter, and Acidithiobacillus. The underlying mechanisms of K dissolution by KSB include acidolysis, ion exchange reactions, chelation, complexolysis, and release of various organic and inorganic acids such as citric, oxalic, acetic, gluconic, and tartaric acids. These acids cause disintegration of K-bearing minerals and bring K+ into soil solution that becomes available to the plants. Current literature review updates the scientific information about microbial species, factors, and mechanisms governing the bio-intrusion of K-bearing minerals. Moreover, it explores the potential of KSB not only for K-solubilization but also to enhance bioavailability of phosphorus, nitrogen, and micronutrients, as well as its other beneficial impact on plant growth. Thus, in the context of sustainable agricultural production and global food security, utilization of KSB may facilitate plant nutrient availability, conserve natural resources, and reduce environmental impacts caused by chemical fertilizers.

Multi-dimensional perspectives into the pervasive role of microbial extracellular polymeric substances in electron transport processes

During the process of biological treatment, most microorganisms are encapsulated in extracellular polymeric substances (EPS), which protect the cell from adverse environments and aid in microbial attachment. Microorganisms utilize extracellular electron transfer (EET) for energy and information interchange with other cells and the outside environment. Understanding the role of steric EPS in EET is critical for studying microbiology and utilizing microorganisms in biogeochemical processes, pollutant transformation, and bioenergy generation. However, the current study shows that understanding the roles of EPS in the EET processes still needs a great deal of research. In view of recent research, this work aims to systematically summarize the production and functional group composition of microbial EPS. Additionally, EET pathways and the role of EPS in EET processes are detailed. Then factors impacting EET processes in EPS are then discussed, with a focus on the spatial structure and composition of EPS, conductive materials and environmental pollution, including antibiotics, pH and minerals. Finally, strategies to enhance EET, as well as current challenges and future prospects are outlined in detail. This review offers novel insights into the roles of EPS in biological electron transport and the application of microorganisms in pollutant transformation.

Transcriptomic analysis of Chaetoceros muelleri in response to different nitrogen concentrations reveals the activation of pathways to enable efficient nitrogen uptake

Nitrogen is the principal nutrient deficiency that increases lipids and carbohydrate content in diatoms but negatively affects biomass production. Marine diatom Chaetoceros muelleri is characterized by lipid and carbohydrate accumulation under low nitrogen concentration without affecting biomass. To elucidate the molecular effects of nitrogen concentrations, we performed an RNA-seq analysis of C. muelleri grown under four nitrogen concentrations (3.53 mM, 1.76 mM, 0.44 mM, and 0.18 mM of NaNO3). This research revealed that changes in global transcription in C. muelleri are differentially expressed by nitrogen concentration. "Energetic metabolism", "Carbohydrate metabolism" and "Lipid metabolism" pathways were identified as the most upregulated by N deficiency. Due to N limitation, alternative pathways to self-supply nitrogen employed by microalgal cells were identified. Additionally, nitrogen limitation decreased chlorophyll content and caused a greater response at the transcriptional level with a higher number of unigenes differentially expressed. By contrast, the highest N concentration (3.53 mM) recorded the lowest number of differentially expressed genes. Amt1, Nrt2, Fad2, Skn7, Wrky19, and Dgat2 genes were evaluated by RT-qPCR. In conclusion, C. muelleri modify their metabolic pathways to optimize nitrogen utilization and minimize nitrogen losses. On the other hand, the assembled transcriptome serves as the basis for metabolic engineering focused on improving the quantity and quality of the diatom for biotechnological applications. However, proteomic and metabolomic analysis is also required to compare gene expression, protein, and metabolite accumulation.

Co-metabolism of microorganisms: A study revealing the mechanism of antibiotic removal, progress of biodegradation transformation pathways

The widespread use of antibiotics has resulted in large quantities of antibiotic residues entering aquatic environments, which can lead to the development of antibiotic-resistant bacteria and antibiotic-resistant genes, posing a potential environmental risk and jeopardizing human health. Constructing a microbial co-metabolism system has become an effective measure to improve the removal efficiency of antibiotics by microorganisms. This paper reviews the four main mechanisms involved in microbial removal of antibiotics: bioaccumulation, biosorption, biodegradation and co-metabolism. The promotion of extracellular polymeric substances for biosorption and extracellular degradation and the regulation mechanism of enzymes in biodegradation by microorganisms processes are detailed therein. Transformation pathways for microbial removal of antibiotics are discussed. Bacteria, microalgae, and microbial consortia's roles in antibiotic removal are outlined. The factors influencing the removal of antibiotics by microbial co-metabolism are also discussed. Overall, this review summarizes the current understanding of microbial co-metabolism for antibiotic removal and outlines future research directions.

Genome and pan-genome analysis of a new exopolysaccharide-producing bacterium Pyschrobacillus sp. isolated from iron ores deposit and insights into iron uptake

Bacterial exopolysaccharides (EPS) have emerged as one of the key players in the field of heavy metal-contaminated environmental bioremediation. This study aimed to characterize and evaluate the metal biosorption potential of EPS produced by a novel Psychrobacillus strain, NEAU-3TGS, isolated from an iron ore deposit at Tamra iron mine, northern Tunisia. Genomic and pan-genomic analysis of NEAU-3TGS bacterium with nine validated published Psychrobacillus species was also performed. The results showed that the NEAU-3TGS genome (4.48 Mb) had a mean GC content of 36%, 4,243 coding sequences and 14 RNA genes. Phylogenomic analysis and calculation of nucleotide identity (ANI) values (less than 95% for new species with all strains) confirmed that NEAU-3TGS represents a potential new species. Pangenomic analysis revealed that Psychrobacillus genomic diversity represents an "open" pangenome model with 33,091 homologous genes, including 65 core, 3,738 shell, and 29,288 cloud genes. Structural EPS characterization by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy showed uronic acid and α-1,4-glycosidic bonds as dominant components of the EPS. X-ray diffraction (XRD) analysis revealed the presence of chitin, chitosan, and calcite CaCO3 and confirmed the amorphous nature of the EPS. Heavy metal bioabsorption assessment showed that iron and lead were more adsorbed than copper and cadmium. Notably, the optimum activity was observed at 37°C, pH=7 and after 3 h contact of EPS with each metal. Genomic insights on iron acquisition and metabolism in Psychrobacillus sp. NEAU-3TGS suggested that no genes involved in siderophore biosynthesis were found, and only the gene cluster FeuABCD and trilactone hydrolase genes involved in the uptake of siderophores, iron transporter and exporter are present. Molecular modelling and docking of FeuA (protein peptidoglycan siderophore-binding protein) and siderophores ferrienterobactine [Fe+3 (ENT)]-3 and ferribacillibactine [Fe+3 (BB)]-3 ligand revealed that [Fe+3 (ENT)]-3 binds to Phe122, Lys127, Ile100, Gln314, Arg215, Arg217, and Gln252. Almost the same for [Fe+3 (ENT)]-3 in addition to Cys222 and Tyr229, but not Ile100.To the best of our knowledge, this is the first report on the characterization of EPS and the adsorption of heavy metals by Psychrobacillus species. The heavy metal removal capabilities may be advantageous for using these organisms in metal remediation.

Contribution of Cd passivating functional bacterium H27 to tobacco growth under Cd stress

The cadmium (Cd) embedded in tobacco not only affects yield and quality but also harms human health. Microbial remediation has attracted widespread attention due to its low cost and minimal risk of secondary pollution. Therefore, researching microbes capable of inhibiting crop absorption of heavy metals or removing heavy metals from the environment has significant practical implications. This study screened a strain named H27 with a Cd immobilization efficiency of up to 76.60%. Static cultivation experiments showed that immobilization of Cd by H27 is achieved through intracellular absorption, hydroxyl, carboxyl, and phosphate group reactions on the cell wall. The bacterium can also secrete extracellular substances to adsorb Cd and increase the environmental pH, reducing the bioavailability of Cd. H27 reduced the accumulation of Cd in the stems of hydroponically grown tobacco by 55.23% and decreased the expression of three Cd transport genes, HAM2, IRT1, and NRAMP1, in the roots. Additionally, H27 increased the mineralization rate of organic matter, increased the content of humic acid in the soil, promoted the formation of smaller soil particles, and enhanced the adsorption and fixation of Cd by soil components while simultaneously raising the pH of rhizosphere and non-rhizosphere soils in tobacco growth environments. Both hydroponic and potted experiments showed that H27 alleviated the inhibitory effect of Cd on tobacco growth, significantly reducing Cd accumulation in various parts of tobacco and lowering the transfer coefficient of Cd within the tobacco plant. This study aims to effectively reduce the Cd content in tobacco using microbes, mitigate the harm of heavy metals in cigarettes to human health, and provide theoretical and practical basis for the application of microbial techniques to control heavy metal absorption in tobacco.

Understanding visible light and microbe-driven degradation mechanisms of polyurethane plastics: Pathways, property changes, and product analysis

The accumulation of polyurethane plastics (PU-PS) in the environment is on the rise, posing potential risks to the health and function of ecosystems. However, little is known about the degradation behavior of PU-PS in the environment, especially water environment. To address this knowledge gap, we investigated and isolated a degrading strain of Streptomyces sp. B2 from the surface of polyurethane coatings. Subsequently, a photoreactor was employed to simulate the degradation process of bio-based polyurethane (BPU) and petroleum-based polyurethane (PPU) under three conditions, including single microorganism (SM), single light exposure (SL), and combined light exposure/microorganism action (ML) in aqueous solution. The results indicated that PU-PS mainly relies on biodegradation, with the highest degradation rate observed after 28 d under SM condition (BPU 5.69 %; PPU 5.25 %). SL inhibited microbial growth and degradation, with the least impact on plastic degradation. Microorganisms colonized the plastic surface, secreting relevant hydrolytic enzymes and organic acids into the culture medium, providing a negative charge. The carbon chains were broken and aged through hydrogen peroxide induction or attack by oxygen free radicals. This process promoted the formation of oxidized functional groups such as OH and CO, disrupting the polymer's structure. Consequently, localized fragmentation and erosion of the microstructure occurred, resulting in the generation of secondary microplastic (MPs) particles, weight loss of the original plastic, increased surface roughness, and enhanced hydrophilicity. Additionally, BPU exhibited greater degradability than PPU, as microorganisms could utilize the produced fatty acids, which promoted their reproduction. In contrast, PPU degradation generated a large amount of isocyanate, potentially toxic to cells and inhibiting biodegradation. This study unveils the significant role of microorganisms in plastic degradation and the underlying degradation mechanisms of BPU, providing a novel strategy for polyurethane degradation and valuable information for comprehensive assessment of the behavior and fate of MPs in the environment.

Roles of quorum-sensing molecules in methane production from anaerobic digestion aided by biochar

Biochar has been used to enhance methane generation from anaerobic digestion through establishing direct interspecific electron transfer between microorganisms. However, the microbial communication is still inadequate, thereby limiting further methane production improvement contributed by biochar. This study investigated the roles of quorum-sensing molecules, acylated homoserine lactone (AHL), in anaerobic digestion of waste activated sludge aided by biochar. Results showed that the co-addition of separated biochar and AHL achieved best methane production performance, with the maximal methane yield of 154.7 mL/g volatile suspended solids, which increased by 51.9%, 47.2%, 17.9%, and 39.4% respectively compared to that of control, AHL-loaded biochar, sole AHL, and sole biochar groups. The reason was that the co-addition of separated biochar and AHL promoted the stages of hydrolysis and acidification, promoting the conversion of organic matters and short-chain fatty acids, and optimizing the accumulation of acetate acid. Moreover, the methanogenesis stage also performed best among experimental groups. Correspondingly, the highest activities of electron transfer and coenzyme F420 were obtained, with increase ratios of 33.2% and 27.2% respectively compared to that of control. Furthermore, biochar did more significant effects on the evolution of microbial communities than AHL, and the direct interspecific electron transfer between fermentative bacteria and methanogens were possibly promoted.

Response Mechanism of Extracellular Polymeric Substances Synthesized by Alternaria sp. on Drought Stress in Alfalfa (Medicago sativa L.)

This study investigates how extracellular polymeric substances (EPS) synthesized by dark septate endophytic (DSE) improve alfalfa's drought resistance. Drought stress was simulated in hydroponic culture, and roots were treated with different EPS concentrations to determine their effects on drought tolerance and applicable concentrations. Hydroponic solutions with 0.25 and 0.50% EPS concentrations alleviated leaf wilting and increased total plant fresh weight by 35.8 and 57.7%, respectively. SEM shows that EPS attached to the roots and may have served to protect the root system. EPS treatment significantly depressed the MDA contents of the roots, stems, and leaves. Roots responded to drought stress by increasing soluble sugar contents and antioxidant enzyme activities, while mitigating stem and leaf stress by synthesizing lipid compounds, amino acids, and organic acid metabolites. Five metabolites in the stem have been reported to be associated with plant stress tolerance and growth, namely 3-O-methyl 5-O-(2-methyl propyl) (4S)-2,6-dimethyl-4-(2-nitrophenyl)-3,4-dihydropyridine-3,5-dicarboxylate, malic acid, PA (20:1(11Z)/15:0), N-methyl-4,6,7-trihydroxy-1,2,3,4-tetrahydroisoquinoline, and 2-(S-glutathionyl) acetyl glutathione. In summary, EPS treatment induced oxidative stress and altered plant metabolism, and this in turn increased plant antioxidant capacity. The results provide a theoretical basis for the application of EPS in commercial products that increase plant resistance and ecological restoration.

Effect of microwaves combined with peracetic acid to improve the dewatering performance of residual sludge

The activated sludge process plays a crucial role in modern wastewater treatment plants. During the treatment of daily sewage, a large amount of residual sludge is generated, which, if improperly managed, can pose burdens on the environment and human health. Additionally, the highly hydrated colloidal structure of biopolymers limits the rate and degree of dewatering, making mechanical dewatering challenging. This study investigates the impact and mechanism of microwave irradiation (MW) in conjunction with peracetic acid (PAA) on the dewatering efficiency of sludge. Sludge dewatering effectiveness was assessed through capillary suction time (CST) and specific resistance to filtration (SRF). Examination of the impact of MW-PAA treatment on sludge dewatering performance involved assessing the levels of extracellular polymeric substances (EPS), employing three-dimensional excitation-emission matrix (3D-EEM), Fourier transform-infrared spectroscopy (FT-IR), and scanning electron microscopy. Findings reveal that optimal dewatering performance, with respective reductions of 91.22% for SRF and 84.22% for CST, was attained under the following conditions: microwave power of 600 W, reaction time of 120 s, and PAA dosage of 0.25 g/g MLSS. Additionally, alterations in both sludge EPS composition and floc morphology pre- and post-MW-PAA treatment underwent examination. The findings demonstrate that microwaves additionally boost the breakdown of PAA into •OH radicals, suggesting a synergistic effect upon combining MW-PAA treatment. These pertinent research findings offer insights into employing MW-PAA technology for residual sludge treatment.

Recent advances in innovative osmotic membranes for resource enrichment and energy production in wastewater treatment

Wastewater is a valuable resource that we can no longer afford to overlook. By recovering the nutrients and metals it contains and generating renewable energy, we can not only meet the rising demands for natural resources but also create a more sustainable and resilient future. Forward osmosis (FO) membranes are one of the most intriguing resource recovery process technologies because of their high organic retention, economical energy usage, and straightforward operation. However, the widespread adoption of FO membranes on a full-scale basis is hindered by several issues with previous membrane products. These include limited selectivity to different types of ions, insufficient water flux, and high susceptibility to membrane fouling during extended periods of operation. Hence, it is essential to either invent new FO membranes or modify the existing ones. The objective of this work is to provide a comprehensive and organized review of up-to-date advancements in the development of innovative osmotic membrane (IOM) materials for resource recovery (RR) and energy production (EP). The paper covers several aspects, including the limitations of current osmotic membrane technologies, a review of new membranes specifically designed for effective RR/EP, their applications in various industrial fields, integrated IOM systems, recent improvements in IOM fabrication processes using artificial intelligence, and a discussion of the challenges and prospects of the potential research. In general, recently developed IOMs have proven to be highly efficient in recovering organics (>99 %), nutrients (>86 %), and precious metals (>90 %). These new membranes have also demonstrated an ability to effectively harvest osmotic energy (with power output ranging from 6 to 38 W/m2) by applied pressure in the range of 8 to 30 bar. These findings suggest that IOMs is promised for efficient resource recovery and renewable energy production.

Exploring biosynthesis strategies to boost the yield of exopolysaccharide-protein blend from Bacillus arachidis SY8(T), an isolated native strain, as a potent adsorbent for heavy metals removal

This investigation centers on the synthesis of a polysaccharide-protein blend produced by an isolated native strain (99.12 % phylogenetic affinity with Bacillus arachidis SY8(T)). The primary objective was to investigate the production of extracellular polymeric substances (EPS) under diverse stress conditions, encompassing exposure to heavy metal ions, salt, and toxic agents. Additionally, the impact of environmental parameters, namely pH, inoculation percentage, and time, on the production was investigated. Subsequently, the study examined the biosorption potential of the EPS produced for Pb(II), Cu(II), and Mn(II). The EPS obtained was thoroughly characterized via various tests. Rheological evaluations of an EPS solution (2 wt%) confirmed its pseudo-plastic and non-Newtonian fluid properties, while TGA analysis demonstrated its thermal stability up to 600 °C. Additional analyses, including GPC, FTIR, and H-NMR, provide further insights into the produced EPS. The best conditions for EPS production are determined: 5 % NaCl salt, serving as an effective stress inducer, and 37 °C, pH 6, with a 5 % inoculation, over 96 h. EPS demonstrates remarkable removal efficiencies of 99.9, 99.4 and 78.9 % for Pb(II), Cu(II), and Mn(II), respectively. These findings highlight the potential of EPS as an effective agent for removing heavy metal ions.

Physical conditioning methods for sludge deep dewatering: A critical review

Sludge is an inevitable waste product of sewage treatment with a high water content and large volume, it poses a significant threat of secondary pollution to both water and the atmosphere without proper disposal. In this regard, dewatering has emerged as an attractive method in sludge treatment, as it can reduce the sludge volume, enhance its transportability and calorific value, and even decrease the production of landfill leachate. In recent years, physical conditioning methods including non-chemical conditioners or energy input alone, have been extensively researched for their potential to enhance sludge dewatering efficiency, such as thermal treatment, freeze-thaw, microwave, ultrasonic, skeleton builders addition, and electro-dewatering, as well as combined methods. The main objective of this paper is to comprehensively evaluate the dewatering capacity of various physical conditioning methods, and identify key factors affecting sludge dewatering efficiency. In addition, future research anticipated directions and outlooks are proposed. This work is expected to provide valuable insights for developing efficient, eco-friendly, and low-energy consumption techniques for deep sludge dewatering.

Differentiation and quantification of extracellular polymeric substances from microalgae and bacteria in the mixed culture

Extracellular polymeric substances (EPS) play significant roles in the formation, function, and interactions of microalgal-bacteria consortia. Understanding the key roles of EPS depends on reliable extraction and quantification methods, but differentiating of EPS from microalgae versus bacteria is challenging. In this work, cation exchange resin (CER) and thermal treatments were applied for total EPS extraction from microalgal-bacteria mixed culture (MBMC), flow cytometry combined with SYTOX Green staining was applied to evaluate cell disruption during EPS extraction, and auto-fluorescence-based cell sorting (AFCS) was used to separate microalgae and bacteria in the MBMC. Thermal extraction achieved much higher EPS yield than CER, but higher temperature and longer time reduced cell activity and disrupted the cells. The highest EPS yield with minimal loss of cell activity and cell disruption was achieved using thermal extraction at 55℃ for 30 min, and this protocol gave good results for MBMC with different microalgae:bacteria (M:B) mass ratios. AFCS combined with thermal treatment achieved the most-efficient biomass differentiation and low EPS loss (<4.5 %) for the entire range of M:B ratios. EPS concentrations in bacteria were larger than in microalgae: 42.8 ± 0.4 mg COD/g TSS versus 9.19 ± 0.38 mg COD/g TSS. These findings document sensitive and accurate methods to extract and quantify EPS from microalgal-bacteria aggregates.

Influence of purple non-sulfur bacterial augmentation on soil nutrient dynamics and rice (Oryza sativa) growth in acidic saline-stressed environments

The aim of the current study was to assess the potency of the exopolymeric substances (EPS)-secreting purple non-sulfur bacteria (PNSB) on rice plants on acidic salt-affected soil under greenhouse conditions. A two-factor experiment was conducted following a completely randomized block design. The first factor was the salinity of the irrigation, and the other factor was the application of the EPS producing PNSB (Luteovulum sphaeroides EPS18, EPS37, and EPS54), with four replicates. The result illustrated that irrigation of salt water at 3-4‰ resulted in an increase in the Na+ accumulation in soil, resulting in a lower rice grain yield by 12.9-22.2% in comparison with the 0‰ salinity case. Supplying the mixture of L. sphaeroides EPS18, EPS37, and EPS54 increased pH by 0.13, NH4+ by 2.30 mg NH4+ kg-1, and available P by 8.80 mg P kg-1, and decreased Na+ by 0.348 meq Na+ 100 g-1, resulting in improvements in N, P, and K uptake and reductions in Na uptake, in comparison with the treatment without bacteria. Thus, the treatments supplied with the mixture of L. sphaeroides EPS18, EPS37, and EPS54 resulted in greater yield by 27.7% than the control treatment.

Sewer sediment adhesion degeneration and gelatinous biopolymer deconstruction by structural cation chelation and alkaline macromolecule hydrolysis for improving hydraulic erosion

Sediment siltation has been regarded as the serious challenge in sewer system, which dominantly root in the gelatinous extracellular polymeric substance (EPS) structure and cohesive ability. Considering the crucial roles of divalent cation bridging and macromolecular biopolymer winding in sediment EPS formation and adhesive behavior, an innovative combination strategy of sodium pyrophosphate (SP)-mediated divalent cation chelation and alkaline biopolymer hydrolysis was developed to degenerate sediment adhesion. At the SP dosage of 0.25 g/g TS and the alkaline pH 12, the SP + pH 12 treatment triggered structural transformation of aromatic proteins (α-helix to β-turn) and functional group shifts of macromolecular biopolymers. In this case, the deconstruction and outward dissolution of gelatinous biopolymers were achievable, including proteins (tyrosine-like proteins, tryptophan-like proteins), humic acids, fulvic acids, polysaccharides and various soluble microbial products. These were identified as the major driving forces for sediment EPS matrix disintegration and bio-aggregation deflocculation. The extraction EPS content was obviously increased by 18.88 mg COD/g TS. The sediment adhesion was sensitive to EPS matrix damage and gelatinous biopolymer deconstruction, leading to considerable average adhesion degeneration to 0.98 nN with reduction rate of 78.32%. As such, the sediments could be disrupted into dispersive fragments with increased surface electronegativity and electric repulsion (up to -45.6 mV), thereby the sediment resistance to hydraulic erosion was impaired, providing feasibility for in-situ sediment floating and removal by gravity sewage flow in sewer.

Efficacy of exopolysaccharide in dye-laden wastewater treatment: A comprehensive review

The discharge of dye-laden wastewater into the water streams causes severe water and soil pollution, which poses a global threat to aquatic ecosystems and humans. A diverse array of microorganisms such as bacteria, fungi, and algae produce exopolysaccharides (EPS) of different compositions and exhibit great bioflocculation potency to sustainably eradicate dyes from water bodies. Nanomodified chemical composites of EPS enable their recyclability during dye-laden wastewater treatment. Nevertheless, the selection of potent EPS-producing strains and physiological parameters of microbial growth and the remediation process could influence the removal efficiency of EPS. This review will intrinsically discuss the fundamental importance of EPS from diverse microbial origins and their nanomodified chemical composites, the mechanisms in EPS-mediated bioremediation of dyes, and the parametric influences on EPS-mediated dye removal through sorption/bioflocculation. This review will pave the way for designing and adopting futuristic green and sustainable EPS-based bioremediation strategies for dye-laden wastewater in situ and ex situ.

Significantly enhanced biodegradation of profenofos by Cupriavidus nantongensis X1T mediated by walnut shell biochar

The feasibility of using walnut shell biochar to mediate biodegradation of Cupriavidus nantongensis X1T for profenofos was investigated. The results of scanning electron microscopy, classical DLVO theory and Fourier transform infrared spectroscopy indicated that strain X1T was stably immobilized on biochar by pore filling, van der Waals attraction, and hydrogen bonding. Profenofos degradation experiments showed that strain X1T immobilized on biochar significantly decomposed profenofos (shortened the half-life by 5.2 folds) by promoting the expression of the degradation gene opdB and the proliferation of strain X1T. The immobilized X1T showed stronger degradation ability than the free X1T at higher initial concentration, lower temperature and pH. The immobilized X1T could maintain 83% of removal efficiency for profenofos after 6 reuse cycles in paddy water. Thus, X1T immobilized using walnut shell biochar as a carrier could be practically applied to biodegradation of organophosphorus pesticides present in agricultural water.

Using Essential Oils to Reduce Yersinia enterocolitica in Minced Meat and in Biofilms

Yersiniosis, one of the leading foodborne infections in the European Union, is caused by Yersinia enterocolitica. In this study, the antibacterial and antibiofilm effects of cinnamon (Cinnamomum zeylanicum Nees), clove (Syzygium aromaticum L.), oregano (Origanum vulgare L.), rosemary (Rosmarinus officinalis L.), thyme (Thymus vulgaris L.), and winter savory (Satureja montana L.) essential oils were investigated against Y. enterocolitica strains belonging to the bioserotype 4/O:3. Cinnamon essential oil showed the highest antibacterial activity, with an MIC value 0.09 µL/mL, followed by oregano and thyme essential oils, with MIC values from 0.09 to 0.18 µL/mL, and from 0.18 to 0.23 µL/mL, respectively. Thyme essential oil at 0.23 µL/g (MIC) and at 0.46 µL/g (2MIC) significantly (p < 0.05) reduced the number of Y. enterocolitica by 0.38 log CFU/g and 0.64 log CFU/g, respectively, in minced pork meat during storage at 4 °C for 4 days. The Y. enterocolitica strains formed biofilms at 15 °C and 37 °C in tryptic soy broth and Luria-Bertani broth, while no biofilms were obtained at 5 °C, and in meat broth nutrient media. Applying the minimum bactericidal concentrations of cinnamon, clove, oregano, rosemary, thyme, and winter savory essential oils on preformed biofilms led to significant reductions being observed in the range from 45.34% to 78.89%. A scanning electron microscopy assay showed the devastating impact of oregano and thyme essential oils on the morphology of Y. enterocolitica bacterial cells. In conclusion, the results of this study show that essential oils possess high anti-Yersinia and antibiofilm effects.

Promotion of anaerobic biodegradation of azo dye RR2 by different biowaste-derived biochars: Characteristics and mechanism study by machine learning

The addition of biochar resulted in a 31.5 % to 44.6 % increase in decolorization efficiency and favorable decolorization stability. Biochar promoted extracellular polymeric substances (EPS) secretion, especially humic-like and fulvic-like substances. Additionally, biochar enhanced the electron transfer capacity of anaerobic sludge and facilitated surface attachment of microbial cells. 16S rRNA gene sequencing analysis indicated that biochar reduced microbial species diversity, enriching fermentative bacteria such as Trichococcus. Finally, a machine learning model was employed to establish a predictive model for biochar characteristics and decolorization efficiency. Biochar electrical conductivity, H/C ratio, and O/C ratio had the most significant impact on RR2 anaerobic decolorization efficiency. According to the results, the possible mechanism of RR2 anaerobic decolorization enhanced by different types of biochar was proposed.

Leuconostoc mesenteroides and Liquorilactobacillus mali strains, isolated from Algerian food products, are producers of the postbiotic compounds dextran, oligosaccharides and mannitol

Six lactic acid bacteria (LAB) isolated from Algerian sheep's milk, traditional butter, date palm sap and barley, which produce dextran, mannitol, oligosaccharides and vitamin B2 have been characterized. They were identified as Leuconostoc mesenteroides (A4X, Z36P, B12 and O9) and Liquorilactobacillus mali (BR201 and FR123). Their exopolysaccharides synthesized from sucrose by dextransucrase (Dsr) were characterized as dextrans with (1,6)-D-glucopyranose units in the main backbone and branched at positions O-4, O-2 and/or O-3, with D-glucopyranose units in the side chain. A4X was the best dextran producer (4.5 g/L), while the other strains synthesized 2.1-2.7 g/L. Zymograms revealed that L. mali strains have a single Dsr with a molecular weight (Mw) of ~ 145 kDa, while the Lc. mesenteroides possess one or two enzymes with 170-211 kDa Mw. As far as we know, this is the first detection of L. mali Dsr. Analysis of metabolic fluxes from sucrose revealed that the six LAB produced mannitol (~ 12 g/L). The co-addition of maltose-sucrose resulted in the production of panose (up to 37.53 mM), an oligosaccharide known for its prebiotic effect. A4X, Z36P and B12 showed dextranase hydrolytic enzymatic activity and were able to produce another trisaccharide, maltotriose, which is the first instance of a dextranase activity encoded by Lc. mesenteroides strains. Furthermore, B12 and O9 grew in the absence of riboflavin (vitamin B2) and synthesized this vitamin, in a defined medium at the level of ~ 220 μg/L. Therefore, these LAB, especially Lc. mesenteroides B12, are good candidates for the development of new fermented food biofortified with functional compounds.

A sustainable solution for alleviating hexavalent chromium from water streams using Lactococcus lactis AM99 as a novel Cr(VI)-reducing bacterium

Chromium, extensively used in various industries, poses significant challenges due to its environmental impact. The threat of Cr(VI) causes critical concerns in aquatic ecosystems as a consequence of the fluidity of water. The conventional approach for the treatment of effluents containing Cr(VI) is reducing Cr(VI) to low-noxious Cr(III). This research is related to a Gram positive bacterium newly isolated from tannery effluent under aerobic conditions. To characterize functional groups on the isolate, Fourier transform infrared spectroscopy was utilized. The effect of different factors on Cr(VI) bioreduction was investigated, including temperature, initial Cr(VI) concentration, acetate concentration, and Tween 80 surfactant. Under optimal conditions (37 °C and 0.90 g/L sodium acetate), the bioreduction rate of the isolate, identified as Lactococcus lactis AM99, achieved 88.0 % at 300 mg/L Cr(VI) during 72 h (p < 0.05). It was observed that Cr(VI) bioreduction was enhanced by the acetate in both the quantity and intensity, while Tween 80 had no impact on the reaction. The strain AM99 exhibited remarkable characteristics, notably a marginal decrease in growth at elevated concentrations of hexavalent chromium and an exceptional potential to reduce Cr(VI) even at very low biomass levels, surpassing any prior findings in the associated research. Furthermore, The isolate could tolerate 1400 mg/L Cr(VI) in a solid medium. These distinctive features make the isolate a promising and well-suited candidate for remediating Cr(VI)-polluted environments. Additionally, the impact of biogenic extracellular polymer produced by the strain AM99 on reduction was examined at different temperatures.

The role of extracellular polymeric substances (EPS) in chemical-degradation of persistent organic pollutants in soil: A review

Persistent organic pollutants (POPs) in soil show high environmental risk due to their high toxicity and low biodegradability. Studies have demonstrated the degradation function of microbial extracellular polymeric substances (EPS) on POPs in various matrices. However, the degradation mechanisms and the factors that influence the process in soil have not been clearly illustrated. In this review, the characteristics of EPS were introduced and the possible mechanisms of EPS on degradation of organic pollutants (e.g., external electron transfer, photodegradation, and enzyme catalysis) were comprehensively discussed. In addition, the environmental conditions (e.g., UV, nutrients, and redox potential) that could influence the production and degradation-related active components of EPS were addressed. Moreover, the current approaches on the application of EPS in biotechnology were summarized. Further, the future perspectives of enhancement on degradation of POPs by regulating EPS were discussed. Overall, this review could provide a new thought on remediation of POPs by widely-existing EPS in soil with low-cost and minimized eco-disturbance.

Insights into the role of extracellular polymeric substances (EPS) in the spread of antibiotic resistance genes

Antibiotic resistance genes (ARG) are prevalent in aquatic environments. Discharge from wastewater treatment plants is an important point source of ARG release into the environment. It has been reported that biological treatment processes may enhance rather than remove ARG because of their presence in sludge. Attenuation of ARG in biotechnological processes has been studied in depth, showing that many microorganisms can secrete complex extracellular polymeric substances (EPS). These EPS can serve as multifunctional elements of microbial communities, involving aspects, such as protection, structure, recognition, adhesion, and physiology. These aspects can influence the interaction between microbial cells and extracellular ARG, as well as the uptake of extracellular ARG by microbial cells, thus changing the transformative capability of extracellular ARG. However, it remains unclear whether EPS can affect horizontal ARG transfer, which is one of the main processes of ARG dissemination. In light of this knowledge gap, this review provides insight into the role of EPS in the transmission of ARGs; furthermore, the mechanism of ARG spread is analyzed, and the molecular compositions and functional properties of EPS are summarized; also, how EPS influence ARG mitigation is addressed, and factors impacting how EPS facilitate ARG during wastewater treatment are summarized. This review provides comprehensive insights into the role of EPS in controlling the transport and fate of ARG during biodegradation processes at the mechanistic level.

Aerobic granular sludge for complex heavy metal-containing wastewater treatment: characterization, performance, and mechanisms analysis

Complex heavy metal (HM)-containing wastewater discharges pose substantial risks to global water ecosystems and human health. Aerobic granular sludge (AGS) has attracted increased attention as an efficient and low-cost adsorbent in HM-containing wastewater treatment. Therefore, this study systematically evaluates the effect of Cu(II), Ni(II), and Cr(III) addition on the characteristics, performance and mechanism of AGS in complex HM-containing wastewater treatment process by means of fourier transform infrared spectroscopy, inductively coupled plasma spectrocopcy, confocal laser scanning microscopy, extracellular polymeric substances (EPS) fractions detection and scanning electron microscope-energy dispersive X-ray. The results showed that AGS efficiently eliminated Cu(II), Ni(II), and Cr(III) by the orchestrated mechanisms of ion exchange, three-layer EPS adsorption [soluble microbial products EPS (SMP-EPS), loosely bound EPS (LB-EPS), tightly bound EPS (TB-EPS)], and inner-sphere adsorption; notably, almost 100% of Ni(II) was removed. Three-layer EPS adsorption was the dominant mechanism through which the HM were removed, followed by ion exchange and inner-sphere adsorption. SMP-EPS and TB-EPS were identified as the key EPS fractions for adsorbing Cr(III) and Cu(II), respectively, while Ni(II) was adsorbed evenly on SMP-EPS, TB-EPS, and LB-EPS. Moreover, the rates at which the complex HM penetrated into the granule interior and their affinity for EPS followed the order Cu(II) > Ni(II) > Cr(III). Ultimately, addition of complex HM stimulated microorganisms to excrete massive phosphodiesterases (PDEs), leading to a pronounced decrease in cyclic diguanylate (c-di-GMP) levels, which subsequently suppressed EPS secretion due to the direct linkage between c-di-GMP and EPS. This study unveils the adaptability and removal mechanism of AGS in the treatment of complex HM-containing wastewater, which is expected to provide novel insights for addressing the challenges posed by intricate real wastewater scenarios.

In-situ sewer sediment self-cleaning by plant ash-driven hydrolysis: Impairing adhesion and hydraulic erosion resistance from gelatinous biopolymer molecule deconstruction

The gelatinous structure and adhesion of sediments induced strong hydraulic erosion resistance and bottom siltation, which brought about serious challenges in sewer management. The in-situ sediment self-cleaning technology with low energy and labor consumption has become urgent demand. This study proposed an innovative plant ash-triggered molecule hydrolysis strategy for driving sewer sediment self-cleaning. Plant ash treatment at the optimal dosage of 0.10 g/g SS promoted molecular deconstruction and dissolution of aromatic proteins (tryptophan-like and tyrosine-like proteins), humic acids (fulvic acid-like and humic acid-like substances) and carbohydrates with secondary structure deflocculation (α-helix to β-turn), meanwhile numerous microbial cells were lysed, contributing to linkage breakage in extracellular polymeric substance (EPS). The gelatinous EPS disruption and outward migration with cohesion reduction were achievable. Sediment adhesion was vulnerable to EPS structural damage, which was degenerated by 91.14 %. Correspondingly, the sediment matrix structure was observably disintegrated into dispersive and small fragments, with increased surface electronegativity and eliminated adhesive bio-agglomeration. Thereby, the sensitivity of sediments to hydraulic erosion was greatly improved. In this case, substantial organic and inorganic sediment particles were solubilized and downstream transported by gravity sewage flow. Such plant ash-triggered hydrolysis provided a sustainable strategy for sediment self-cleaning in "waste control by waste" pattern, which improved sediment floating by 7.25-9.57 times. Considerable economic benefits of 35.56-123.46 CNY/(sewer meter length) were obtained compared with traditional mechanical flushing approaches. The findings might provide theoretical and engineering inspirations for solving sewer sediment issues.

Advances from conventional to biochar enhanced biotreatment of dyeing wastewater: A critical review

DW (Dyeing wastewater) contains a large amount of dye organic compounds. A considerable proportion of dye itself or its intermediate products generated during wastewater treatment process exhibits CMR (Carcinogenic/Mutagenic/Toxic to Reproduction) toxicity. Compared with physicochemical methods, biological treatment is advantageous in terms of operating costs and greenhouse gas emissions, and has become the indispensable mainstream technology for DW treatment. This article reviews the adsorption and degradation mechanisms of dye organic compounds in wastewater and analyzed different biological processes, ranging from traditional methods to processes enhanced by biochar (BC). For traditional biological processes, microbial characteristics and communities were discussed, as well as the removal efficiency of different bioreactors. BC has adsorption and redox electron mediated effects, and coupling with biological treatment can further enhance the process of biosorption and degradation. Although BC coupled biological treatment shows promising dye removal, further research is still needed to optimize the treatment process, especially in terms of technical and economic competitiveness.

Taxonomic, Phylogenomic and Bioactivity Profiling of Novel Phycosphere Bacterium from Model Cyanobacterium Synechococcus elongatus PCC 7942

Phycosphere niches host rich microbial consortia that harbor dynamic algae-bacteria interactions with fundamental significance in varied natural ecosystems. Hence, culturing the uncultured microbial majority of the phycosphere microbiota is vital for deep understanding of the intricate mechanisms governing the dynamic interactions, and also to provide novel and rich microbial resources, and to discover new natural bioactive metabolites. Synechococcus elongatus PCC 7942 is a robust model cyanobacterium widely used in environment, synthesis biology, and biotechnology research. To expand the number of novel phycosphere species that were brought into culture and to discover the natural bioactivities, we presented a new yellow-pigmented bacterium named ABI-127-1, which was recovered from the phycosphere of PCC 7942, using an optimized bacterial isolation procedure. Combined polyphasic taxonomic and phylogenomic characterization was performed to confidently identify the new isolate as a potential novel species belonging to the genus Qipengyuania. The observed bioactivity of strain ABI-127-1 with promoting potential towards the growth and CO2 fixation efficiency of the host microalgae was measured. Additionally, the bacterial production of active bioflocculant exopolysaccharides was evaluated after culture optimization. Thus, these findings revealed the potential environmental and biotechnological implications of this new microalgae growth-promoting bacterium isolated from the phycosphere microenvironment.

Application of skeleton builders to sludge dewatering and disposal: A critical review

With the development of cities and population, the production of sludge is increasing annually. It has become an unavoidable challenge to achieve sludge dewatering and disposal by a cost-effective, efficient and safe process. In this work, firstly, the factors limiting sludge dewatering are reviewed in terms of moisture distribution, sludge concentration, organic matter content, electronegativity, floc strength, and extracellular polymers (EPS). Subsequently, focusing on the dewatering technology about the skeleton builder, the recent progress of it is detailed in terms of mechanism, evaluation indicators, influencing factors, and technology coupling. In addition, the impact of skeleton builders on the sludge disposal stage is concluded. Finally, the challenges faced by sludge dewatering and skeleton builders are prospected. This review will provide some theoretical basis and technical guidance for subsequent experiments and practices regarding skeleton builders.

Amplicon-guided isolation and cultivation of previously uncultured microbial species from activated sludge

IMPORTANCE

Biological wastewater treatment relies on complex microbial communities that assimilate nutrients and break down pollutants in the wastewater. Knowledge about the physiology and metabolism of bacteria in wastewater treatment plants (WWTPs) may therefore be used to improve the efficacy and economy of wastewater treatment. Our current knowledge is largely based on 16S rRNA gene amplicon profiling, fluorescence in situ hybridization studies, and predictions based on metagenome-assembled genomes. Bacterial isolates are often required to validate genome-based predictions as they allow researchers to analyze a specific species without interference from other bacteria and with simple bulk measurements. Unfortunately, there are currently very few pure cultures representing the microbes commonly found in WWTPs. To address this, we introduce an isolation strategy that takes advantage of state-of-the-art microbial profiling techniques to uncover suitable growth conditions for key WWTP microbes. We furthermore demonstrate that this information can be used to isolate key organisms representing global WWTPs.

Recent insights into mechanism of modified bio-adsorbents for the remediation of environmental pollutants

Rapid industrialization has exacerbated the hazard to health and the environment. Wide spectrums of contaminants pose numerous risks, necessitating their disposal and treatment. There is a need for further remediation methods since pollutant residues cannot be entirely eradicated by traditional treatment techniques. Bio-adsorbents are gaining popularity due to their eco-friendly approach, broad applicability, and improved functional and surface characteristics. Adsorbents that have been modified have improved qualities that aid in their adsorptive nature. Adsorption, ion exchange, chelation, surface precipitation, microbial uptake, physical entrapment, biodegradation, redox reactions, and electrostatic interactions are some of the processes that participate in the removal mechanism of biosorbents. These processes can vary depending on the particular biosorbent and the type of pollutants being targeted. The systematic review focuses on the many modification approaches used to remove environmental contaminants. Different modification or activation strategies can be used depending on the type of bio-adsorbent and pollutant to be remediated. Physical activation procedures such as ultrasonication and pyrolysis are more commonly used to modify bio-adsorbents. Ultrasonication process improves the adsorption efficiency by 15-25%. Acid and alkali modified procedures are the most effective chemical activation strategies for adsorbent modification for pollution removal. Chemical modification increases the removal to around 95-99%. The biological technique involving microbial culture is an emerging field that needs to be investigated further for pollutant removal. A short evaluation of modified adsorbents with multi-pollutant adsorption capability that have been better eliminated throughout the adsorption process has been provided.

Lithium extraction from typical lithium silicate ores by two bacteria with different metabolic characteristics: Experiments, mechanism and significance

Microorganisms obtain inorganic nutrients or energy from specific minerals to selectively weather minerals, but few studies on the differences in metabolic components of different functional bacteria lead to different weathering effects. This study evaluated the leaching effects of two bacteria with distinct metabolic characteristics on lithium silicate minerals with different structures. We aimed to understand the microscopic mechanism of crystal destruction of lithium silicate minerals with different structures under the action of microorganisms. The results showed that the metabolites produced by an acid producing silicate strain Raoultella sp. Z107 (strain Z107) had a high content of organic acids, among which lactic acid was up to about 11 g/L. Bacillus mucilaginosus 21,699 (strain BM) secreted capsular polysaccharide with a high content of 14.84 mg/L. The metabolic activities of the two strains were significantly different. Through the analysis of the leaching residue, it was found that the lithium silicate minerals were acid etched, interlayer domains expanded, crystallinity decreased, and metal bonds were broken under the action of bacteria. The dissolution of lithium silicate minerals by bacteria is a combination of bacterial adsorption, organic acid corrosion, and complexation of small molecular organic acids and macromolecular polymers with metal ions. The acid erosion and complexation effects of organic acids are greater than the single complexation of capsular polysaccharides, and the layered lepidolite is more likely to be decomposed by the weathering of bacterial metabolites than the chain structure spodumene. These results indicate that the diversity of metabolic activity of bacteria from different sources and the sequence and decomposition mechanism of metal ions released from minerals after lattice destruction are also different. Microorganisms decompose minerals for energy and nutrients, and eventually become the main players in the transformation of elements in biogeology.

Revealing mechanisms of triclosan on the removal and distribution of nitrogen and phosphorus in microalgal-bacterial symbiosis system

Microalgal-bacterial symbiosis (MABS) system performs synergistic effect on the reduction of nutrients and carbon emissions in the water treatment process. However, antimicrobial agents are frequently detected in water, which influence the performance of MABS system. In this study, triclosan (TCS) was selected to reveal the effects and mechanisms of antimicrobial agents on MABS system. Results showed that the removal efficiencies of chemical oxygen demand, NH4+-N and total phosphorus decreased by 3.0%, 24.0% and 14.3% under TCS stress. In contrast, there were no significant decrease on the removal effect of total nitrogen. Mechanism analysis showed that both the growth rate of microorganisms and the nutrients retention capacity of extracellular polymeric substances were decreased. The intracellular accumulation for nitrogen and phosphorus was promoted due to the increased cytomembrane permeability caused by lipid peroxidation. Moreover, microalgae were dominant in MABS system with ratio between microalgae and bacteria of more than 5.49. The main genus was Parachlorella, with abundance of more than 90%. Parachlorella was highly tolerant to TCS, which might be conductive to maintain its survival. This study revealed the nutrients pathways of MABS system under TCS stress, and helped to optimize the operation of MABS system.

Cr(VI) removal from wastewater using nano zero-valent iron and chromium-reducing bacteria

Significant global efforts are currently underway to alleviate the presence of toxic metals in water bodies, aiming to encourage a sustainable environment. Nevertheless, the scientific community has yet to methodically inspect the performance and mechanisms underlying the interaction between nanomaterials and microorganisms in this context. Therefore, this study seeks to address this knowledge gap by developing a novel system that integrates nano zero-valent iron (nZVI) with chromium-reducing bacteria (CrRB) to efficiently remove Cr(VI) from water sources. The combined use of RBC600 and CrRB resulted in a Cr(VI) removal rate of 77.73%, displaying a substantial improvement of 17.61% compared to the use of CrRB alone. The efficacy of Cr(VI) elimination was observed to be affected by several factors within the system, such as the pH value, the quantity of nZVI added, the degree of CrRB inoculation, and the initial concentration of Cr(VI) at the onset of the experiment. When the pH was adjusted to 5, the complete removal of 200 mg/L Cr(VI) was achieved within 36 h. Increasing the dosage of nZVI to above 2 g/L resulted in the complete elimination of Cr(VI) from the solution within 72 h. This can be attributed to the availability of more reaction sites for the reduction of Cr(VI), facilitated by the higher nZVI dose. Additionally, the increased dose of nZVI allowed for the dissolution of more reactive Fe(II) ions. The characterization analysis, high-throughput sequencing, and fluorescence quantitative PCR results have established that CrRB and its extracellular polymer effectively reduce and complex Cr(VI). This process facilitated the dissolution of the passivated layer on the surface of nZVI, thus significantly enhancing the efficiency of nZVI in responding to Cr(VI). Additionally, the presence of nZVI created a favorable living environment for CrRB, resulting in increased richness and diversity within the CrRB community. These findings provide valuable preliminary insights into the mechanism underlying Cr(VI) elimination by the synergistic interaction between nZVI and CrRB. Therefore, this study establishes a solid theoretical foundations for the application of nano-bio synergy in the remediation of Cr(VI).

Roles and regulation of quorum sensing in anaerobic granular sludge: Research status, challenges, and perspectives

Anaerobic granular sludge (AnGS) has a complex and important internal microbial communication system due to its unique microbial layered structure. As a concentration-dependent communication system between bacterial cells through signal molecules, QS (quorum sensing) is widespread in AnGS and exhibits great potential to regulate microbial behaviors. Therefore, the universal functions of QS in AnGS have been systematically summarized in this paper, including the influence on the metabolic activity, physicochemical properties, and microbial community of AnGS. Subsequently, the common QS-based AnGS regulation approaches are reviewed and analyzed comprehensively. The regulation mechanism of QS in AnGS is analyzed from two systems of single bacterium and mixed bacteria. This review can provide a comprehensive understanding of QS functions in AnGS systems, and promote the practical application of QS-based strategies in optimization of AnGS treatment process.

Insights on biological phosphorus removal with partial nitrification in single sludge system via sidestream free ammonia and free nitrous acid dosing

The sidestream sludge treatment by free ammonium (FA)/free nitrous acid (FNA) dosing was frequently demonstrated to maintain the nitrite pathway for the partial nitrification (PN) process. Nevertheless, the inhibitory effect of FA and FNA would severely influence polyphosphate accumulating organisms (PAOs), destroying the microbe-based phosphorus (P) removal. Therefore, a strategic evaluation was proposed to successfully achieve biological P removal with a partial nitrification process in a single sludge system by sidestream FA and FNA dosing. Through the long-term operation of 500 days, excellent phosphorus, ammonium and total nitrogen removal performance were achieved at 97.5 ± 2.6 %, 99.1 ± 1.0 % and 75.5 ± 0.4 %, respectively. Stable partial nitrification with a nitrite accumulation ratio (NAR) of 94.1 ± 3.4 was attained. The batch tests also reported the robust aerobic phosphorus uptake based on FA and FNA adapted sludge after exposure of FA and FNA, respectively, suggesting the FA and FNA treatment strategy could potentially offer the opportunity for the selection of PAOs, which synchronously have the tolerance to FA and FNA. Microbial community analysis suggested that Accumulibacter, Tetrasphaera, and Comamonadaceae collectively contributed to the phosphorus removal in this system. Summarily, the proposed work presents a novel and feasible strategy to integrate enhanced biological phosphorus removal (EBPR) and short-cut nitrogen cycling and bring the combined mainstream phosphorus removal and partial nitrification process closer to practical application.

Characterization on nicotine degradation and research on heavy metal resistance of a strain Pseudomonas sp. NBB

The remediation of polluted sites containing multiple contaminants like nicotine and heavy metals poses significant challenges, due to detrimental effects like cell death. In this study, we isolated a new strain Pseudomonas sp. NBB capable of efficiently degrading nicotine even in high level of heavy metals. It degraded nicotine through pyrrolidine pathway and displayed minimum inhibitory concentrations of 2 mM for barium, copper, and lead, and 5 mM for manganese. In the presence of 2 mM Ba2+ or Pb2+, 3 g L-1 nicotine could be completely degraded within 24 h. Moreover, under 0.5 mM Cu2+ or 5 mM Mn2+ stress, 24.13% and 72.56% of nicotine degradation were achieved in 60 h, respectively. Strain NBB tolerances metal stress by various strategies, including morphological changes, up-regulation of macromolecule transporters, cellular response to DNA damage, and down-regulation of ABC transporters. Notably, among the 153 up-regulated genes, cds_821 was identified as manganese exporter (MneA) after gene disruption and recovery experiments. This study presents a novel strain capable of efficiently degrading nicotine and displaying remarkable resistance to heavy metals. The findings of this research provide valuable insights into the potential application of nicotine bioremediation in heavy metal-contaminated areas.

New insight into the additives in preparation and reduction of shield slurry

In the preparation of the slurry in the slurry shield (SSS) and subsequent reduction of the waste slurry produced by the slurry shield (WSSS), the additives in SSS improve the quality of filtration cake on the excavation surface, but they may also remain in WSSS, which have a negative impact on the reduction efficiency of WSSS. Therefore, it is valuable to establish the relationship between SSS and WSSS with additives as a link. Given this, this paper prepared WSSS with different dosages of additives and studied the influence of residual additives on the reduction. The residual additives made the reduction efficiency of WSSS worse, and the specific resistance to filtration increased by one to two orders of magnitude. The residual additives change the content of bound water or reduce the available sites of the soil particles that can be adsorbed by flocculants, leading to worse reduction results. To reduce the difficulty of reduction, combining polymer and bentonite as additives are recommended to prepare SSS. Polyaluminium chloride (PAC) acts by reducing bound water content through the interaction with residual bentonite, simultaneously augmenting PAM flocculation, which is recommended for reducing WSSS. This paper provides a reference for selecting materials used to prepare SSS and the subsequent reduction of WSSS.

The role of hydrochloric acid pretreated activated carbon in chain elongation of D-lactate to caproate: Adsorption and facilitation

Medium chain fatty acids (MCFA) generation is attracting growing interest due to fossil fuel depletion. To promote the production of MCFA, especially caproate, hydrochloric acid pretreated activated carbon (AC) was introduced into chain elongation fermentation. In this study, the role of pretreated AC on caproate production was investigated using lactate and butyrate as electron donor and electron acceptor, respectively. The results showed that AC did not improve the chain elongation reaction at beginning but promoted the caproate production at later stage. The addition of 15 g/L AC facilitated reactor reaching the peak of caproate concentration (78.92 mM), caproate electron efficiency (63.13%), and butyrate utilization rate (51.88%). The adsorption experiment revealed a positive correlation between the adsorption capacity of pretreated AC and the concentration as well as the carbon chain length of carboxylic acids. Moreover, the adsorption of undissociated caproate by pretreated AC contributed to a mitigated toxicity towards microorganisms, thereby facilitating the production of MCFA. Microbial community analysis revealed an increasing enrichment of key functional chain elongation bacteria, including Eubacterium, Megasphaera, Caproiciproducens, and Pseudoramibacter, but a suppression on acrylate pathway microorganism Veillonella, as the dosage of pretreated AC increasing. The findings of this study demonstrated the substantial impact of the adsorption effect of acid-pretreated AC on promoting caproate production, which would aid to the development of more efficient caproate production process.

Extraction and application of extracellular polymeric substances from fungi

Extracellular polymeric substances (EPS) are extracellular metabolites of microorganisms, highly associated with microbial function, adaptation, and growth. The main compounds in EPS have been revealed to be proteins, polysaccharides, nucleic acids, humic substances, lipids, etc. EPS are not only biomass, but also a biogenic material. EPS have high specific surface, abundant functional groups, and excellent degradability. In addition, they are more extensible to the environment than the microbial cells themselves, which exhibits their huge advantages. Therefore, they have been applied in many fields, such as the environment, ecosystem, basic commodities, and medicine. However, the functions of EPS highly depend on the suitable extraction process, as different extraction methods have different effects on their composition, structure, and function. There are many types of EPS extraction methods, in which physical and chemical methods have been widely utilized. This review summarizes the extraction methods and applications of EPS. In addition, it considers some important gaps in current knowledge, and indicates perspectives of EPS for their future study.

Adaptive Evolution Laws of Biofilm under Emerging Pollutant-Induced Stress: Community Assembly-Driven Structure Response

The widely used biofilm process in advanced wastewater treatment is currently challenged by numerous exotic emerging pollutants (EPs), and the underlying principle of the challenge is the adaptive evolution laws of biofilm under EP stress. However, there is still a knowledge gap in exploration of the biofilm adaptive evolution theory. Herein, we comprehensively analyzed the morphological variation, community succession, and assembly mechanism of biofilms to report the mechanism underlying their adaptive evolution under sulfamethoxazole and carbamazepine stress for the first time. The ecological role of the dominant species was driven as a pioneer and assembly hub by EP stress, and the deterministic processes indicated the functional basis of the transformation. In addition, the characteristic responses of dispersal limitation and homogenizing dispersal adequately revealed the assembly pathways in adaptive evolution and the resulting structural variation. Therefore, the "interfacial exposure-structural variation-mass transfer feedback" mechanism was inferred to underly the adaptive evolution process of biofilms. Overall, this study highlighted the internal drivers of the adaptive evolution of the biofilm at the phylogenetic level and deepened our understanding of the mechanism of biofilm development under EP stress in advanced wastewater purification.

Microbial extracellular polymeric substances alleviate cadmium toxicity in rice (Oryza sativa L.) by regulating cadmium uptake, subcellular distribution and triggering the expression of stress-related genes

Cadmium (Cd) accumulation in crops causes potential risks to human health. Microbial extracellular polymeric substances (EPS) are a complex mixture of biopolymers that can bind various heavy metals. The present work examined the alleviating effects of EPS on Cd toxicity in rice and its detoxification mechanism. The 100 μM Cd stress hampered the overall plant growth and development, damaged the ultrastructures of both leaf and root cells, and caused severe lipid peroxidation in rice plants. However, applying EPS at a concentration of 100 mg/L during Cd stress resulted in increased biomass, reduced Cd accumulation and transport, and minimized the oxidative damage. EPS application also enhanced Cd retention in the shoot cell walls and root vacuoles, and actively altered the expression of genes involved in cell wall formation, antioxidant defense systems, transcription factors, and hormone metabolism. These findings provide new insights into EPS-mediated mitigation of Cd stress in plants and help us to develop strategies to improve crop yield in Cd-contaminated soils in the future.

Insight into the roles of soluble, loosely bound and tightly bound extracellular polymeric substances produced by Enterobacter sp. in the Cd2+ and Pb2+ biosorption process: Characterization and mechanism

Extracellular polymeric substances (EPSs) are macromolecular polymers formed by metabolic secretion, and they have great potential for removing heavy metal (HM) ions from the aquatic phase. In this study, the contributions of soluble EPSs (S-EPSs), loosely bound EPSs (LB-EPSs) and tightly bound EPSs (TB-EPSs) secreted by Enterobacter sp. to Cd²⁺ and Pb²⁺ adsorption were analyzed. The results indicated that in a solution containing both Cd²⁺ and Pb²⁺, pH= 6.0 was best suited for the adsorption process, and adsorption equilibrium was reached in approximately 120 min. Moreover, the mechanism for adsorption of Cd²⁺ and Pb²⁺ by the different layers of EPSs involved spontaneous chemical processes. However, Cd²⁺ adsorption by the three layers of the EPSs was an exothermic process (∆H⁰ <0), but Pb²⁺ adsorption by the three layers of the EPSs was an endothermic process (∆H⁰ >0). The variations in zeta potentials indicated that ion exchange occurred during Cd²⁺ and Pb²⁺ adsorption. FT-IR, XPS and 3D-EEM analyses indicated that the functional groups of the EPSs involved in adsorption were mainly the CO, C-O and C-O-C groups of the polysaccharides; furthermore, fulvic acid-like substances, humic-like substances and tyrosine-like proteins played important roles in the adsorption of Cd²⁺ and Pb²⁺ by the different EPS layers.

A new insight in enhancing phosphate enrichment in biofilm process: Comparison of the key metabolic pathways in highly-efficient and dominant PAOs based on metagenomics

The formation of dominant phosphate-accumulating organisms (PAOs) is essential for the high enrichment of phosphate in biofilm sequencing batch reactors (BSBR) for phosphorus recovery. The dominant PAOs in the biofilm process have not been isolated and purified, and the key metabolic pathways that promote the formation of dominant PAOs are still unclear. In this study, four strains of highly-efficient PAOs were obtained by an innovative isolation procedure. The relationship between the abundance of highly-efficient and dominant PAOs and the phosphate removal ability was compared. We found that the abundance of PAOs was positively correlated with the phosphate removal efficiency in vitro pure culture and complex biofilm process. Metagenomics analysis revealed that compared with highly-efficient PAOs cultured in vitro, dominant PAOs in biofilms had unique key metabolic pathways, F-ATPases and N-Acyl homoserine lactones (AHLs). F-ATPases are important for maintaining the proton motive force (PMF) required for the uptake of carbon sources by PAOs, and AHLs are participating in phosphate metabolism through quorum sensing (QS) mediated secretion of extracellular polymeric substance (EPS). The formation of dominant PAOs was promoted by optimizing carbon source uptake and phosphate metabolism. This study revealed that the difficult isolation of dominant PAOs was due to the AHLs-mediated QS, and we identified the key pathways regulating the formation of dominant PAOs in biofilms through genomics analysis. Our findings provide insights in enhancing phosphate enrichment in BSBR by modulating the components of microbial community under the low concentration of carbon source consumption.

A comparative study of the accumulation and detoxification of copper and zinc in Chlamydomonas reinhardtii: The role of extracellular polymeric substances

Extracellular polymeric substances (EPS) form an interface between microalgae and the surrounding water environment. Copper (Cu) and zinc (Zn) are essential micronutrients but may negatively affect microbial growth when their concentrations reach toxic thresholds. However, how EPS affect the accumulation and resistance of Cu and Zn in microalgae remains largely unknown. Here, we investigated EPS production upon Cu/Zn exposure and compared the tolerance strategies to the two metals by Chlamydomonas reinhardtii with and without EPS. Microalgal EPS synthesis was induced by Cu/Zn treatments, and the functional groups of polysaccharides and proteins were involved in complexation with metal ions. The extraction of EPS aggravated the toxicity and reduced the removal of metals from solution, but the effect was more pronounced for Cu than for Zn. Copper bound on the cell surface accounted for 54.6 ± 2.0 % of the Cu accumulated by C. reinhardtii, whose EPS components strongly correlated with Cu adsorption. In contrast, 74.3 ± 3.0 % of accumulated Zn was absorbed in cells, and glutathione synthesis was significantly induced. Redundancy and linear correlation analyses showed that the polysaccharide, protein and DNA contents in EPS were significantly correlated with Cu accumulation, absorption and adsorption but not with Zn. Data fitted to a Michaelis-Menten model further showed that the EPS-intact cells had higher binding capacity for Cu²⁺ but not for Zn²⁺. These differential impacts of EPS on Cu/Zn sorption and detoxification contribute to a more comprehensive understanding of the roles of microalgal EPS in the biogeochemical cycle of metals.

Potential interactive effect on biomass and bio-polymeric substances of microalgal-bacterial aerobic granular sludge as a valuable resource for sustainable development

The algal/bacterial biomass and extracellular polymeric substances (EPSs) existing in microalgal-bacterial aerobic granular sludge (MB-AGS) offer a promising bioresource. The current review-based paper presents a systematic overview of the compositions and interactions (gene transfer, signal transduction, and nutrient exchange) of microalgal and bacteria consortia, the role of cooperative or competitive partnerships of MB-AGS in the treatment of wastewater and recovery of resource, and the environmental/operational factors affecting their interactions and EPS production. Moreover, a brief notes is given on the opportunities and major challenges of utilizing the microalgal-bacterial biomass and EPS for phosphorus and polysaccharides chemical recovery, renewable energy (i.e. biodiesel, hydrogen, electricity) production. Overall, this compact review will pave the way for developing MB-AGS future biotechnology.

Quorum sensing responses of activated sludge to free nitrous acid: Zoogloea deformation, AHL redistribution, and microbiota acclimatization

Free nitrous acid (FNA) has been widely employed for improvement of wastewater management by altering sludge characteristic and function based on its polymer lysing and biocidal capacity. Sludge characteristic and function are commonly considered as the joint consequence of microbial individual behaviors and quorum sensing (QS) involved collective behaviours, but the role of the latter in FNA treatment was still as-yet-unidentified and addressed in this research. The results of sludge morphology and component characterized FNA-induced zoogloea deformation, including inner cell exposure, half of extracellular polymeric substances (EPS) reduction and adsorption site depletion. During zoogloea deformation, four acyl-homoserine lactones (AHLs), including C4-HSL, C8-HSL, C10-HSL and C12-HSL, transferred inward of microbiota, and their total contents reduced by 66% because of depressed signal production, augmented decomposer and recognition. Transcriptome analysis revealed that differentially expressed QS driven by AHL redistribution facilitated microbiota acclimatization including cellular motility and hydrolase synthesis for EPS consumption. Boosted motility may favor escaping from stress spot and moderating intercellular acidity based on cell motility test. Feasible EPS consumption provided nutrition for heterotrophic metabolisms testified by pure culture with EPS as sole nutrition. Our work thus comprehensively revealed QS behaviours responding to FNA and deepened the understanding to FNA treatment performance in wastewater management.

Synergy effects of Methylomonas koyamae and Hyphomicrobium methylovorum under methanethiol stress

Methanotrophs are able to metabolize volatile organic sulfur compounds (VOSCs), excrete organic carbon during CH₄ oxidation, and influence microbial community structure and function of the ecosystem. In return, microbial community structure and environmental factors can affect the growth metabolism of methanotrophs. In this study, Methylomonas koyamae and Hyphomicrobium methylovorum were used for model organisms, and methanethiol (MT) was chosen for a typical VOSC to investigate the synergy effects under VOSC stress. The results showed that when Hyphomicrobium methylovorum was co-cultured with Methylomonas koyamae in the medium with CH₄ used as the carbon source, the co-culture had better MT tolerance relative to Methylomonas koyamae and oxidized all CH₄ within 120 h, even at the initial MT concentration of 2000 mg m^-3. The optimal co-culture ratios of Methylomonas koyamae to Hyphomicrobium methylovorum were 4:1-12:1. Although MT could be converted spontaneously to dimethyl disulfide (DMDS), H₂S, and CS₂ in air, faster losses of MT, DMDS, H₂S, and CS₂ were observed in each strain mono-culture and the co-culture. Compared with Hyphomicrobium methylovorum, MT was degraded more quickly in the Methylomonas koyamae culture. During the co-culture, the CH₄ oxidation process of Methylomonas koyamae could provide carbon and energy sources for the growth of Hyphomicrobium methylovorum, while Hyphomicrobium methylovorum oxidized MT to help Methylomonas koyamae detoxify. These findings are helpful to understand the synergy effects of Methylomonas koyamae and Hyphomicrobium methylovorum under MT stress and enrich the role of methanotrophs in the sulfur biogeochemical cycle. KEY POINTS: • The co-culture of Methylomonas and Hyphomicrobium has better tolerance to CH₃SH. • Methylomonas can provide carbon sources for the growth of Hyphomicrobium. • The co-culture of Methylomonas and Hyphomicrobium enhances the removal of CH₄ and CH₃SH.

Exopolysaccharide-producing bacteria enhanced Pb immobilization and influenced the microbiome composition in rhizosphere soil of pakchoi (Brassica chinensis L.)

Lead (Pb) contamination of planting soils is increasingly serious, leading to harmful effects on soil microflora and food safety. Exopolysaccharides (EPSs) are carbohydrate polymers produced and secreted by microorganisms, which are efficient biosorbent materials and has been widely used in wastewater treatment to remove heavy metals. However, the effects and underlying mechanism of EPS-producing marine bacteria on soil metal immobilization, plant growth and health remain unclear. The potential of Pseudoalteromonas agarivorans Hao 2018, a high EPS-producing marine bacterium, to produce EPS in soil filtrate, immobilize Pb, and inhibit its uptake by pakchoi (Brassica chinensis L.) was studied in this work. The effects of strain Hao 2018 on the biomass, quality, and rhizospheric soil bacterial community of pakchoi in Pb-contaminated soil were further investigated. The results showed that Hao 2018 reduced the Pb concentration in soil filtrate (16%–75%), and its EPS production increased in the presence of Pb2+. When compared to the control, Hao 2018 remarkably enhanced pakchoi biomass (10.3%–14.3%), decreased Pb content in edible tissues (14.5%–39.2%) and roots (41.3%–41.9%), and reduced the available Pb content (34.8%–38.1%) in the Pb-contaminated soil. Inoculation with Hao 2018 raised the pH of the soil, the activity of several enzymes (alkaline phosphatase, urease, and dehydrogenase), the nitrogen content (NH4+-N and NO3−-N), and the pakchoi quality (Vc and soluble protein content), while also raising the relative abundance of bacteria that promote plant growth and immobilize metals, such as Streptomyces and Sphingomonas. In conclusion, Hao 2018 reduced the available Pb in soil and pakchoi Pb absorption by increasing the pH and activity of multiple enzymes and regulating microbiome composition in rhizospheric soil.