Pulsed UV light as an intervention strategy against Listeria monocytogenes and Escherichia coli O157:H7 on the surface of a meat slicing knife

Pulsed light and jabuticaba peel extract for nitrite reduction and quality enhancement in sliced mortadella

This study evaluated using pulsed light (PL) and jabuticaba peel extract (JPE) to control bacterial growth in sliced mortadella with reduced sodium nitrite content and assessed their impact on food quality. Three formulations were tested: 150 ppm nitrite (100 % of the allowed dosage, N100%), 75 ppm nitrite (N50%), and 75 ppm nitrite with 1 % JPE (N50% + JPE). The mortadella was cooked, sliced, treated with PL (5.28 J/cm2 fluence, 1046.9 W/cm2 irradiance), vacuum-packed, and stored at 4 °C for 30 days. N50% samples exhibited higher TBARS values (0.54 vs. 0.18 mg MDA/kg) and higher population counts of total mesophilic aerobic bacteria (TMAB, 8.38 vs. 7.1 Log CFU/g) and lactic acid bacteria (LAB) (8.21 vs. 6.17 Log CFU/g, respectively) than N100% after 30 days of storage. PL application reduced the TMAB and LAB by 1.4-1.55 Log CFU/g and 1.0-2.24 Log CFU/g for the N100% and N50% formulations (P < 0.05), respectively, but negatively affected pH and color, increasing lipid oxidation. JPE mitigated these defects, and combined JPE and PL presented an enhanced antimicrobial effect, with N50% + JPE + PL samples showing similar microbial counts to N100% over the storage. The combination of JPE and PL also significantly reduced nitrosamine levels, highlighting it as an effective strategy to improve the quality and safety of meat products.

Effect of non-thermal ultraviolet and ultrasound technologies on disinfection of meat preparation equipment in catering industry

In recent years, ultraviolet and ultrasound treatments are gaining attraction as promising green decontamination technologies to ensure microbial safety in food industry. Decontamination by ultraviolet light is a physical process defined by the transfer of electromagnetic energy from a light source to an organism's cellular material and depended on the emission of radiation in the ultraviolet region (100-400 nm), specifically the UV-C region (200-280 nm) which has been demonstrated to be germicidal. Ultrasound technology is defined as sound waves with high and low frequency beyond the limit of human hearing and shows a decontamination effect that occurs as a consequence of cavitation at high power (low frequency) in general. In the present study, it was aimed to determine the effectiveness of ultraviolet light (254 nm, 10 min) and high frequency ultrasound techniques (40 kHz, 10 min) in reducing total aerobic mesophilic bacteria, yeast and mold, Esherichia coli/coliform and Salmonella spp. on the equipment surfaces used in the catering facility. For this purpose, the equipment (cutting knife, meat grinder knife, knife sharpener, cut-proof glove) used in the meat preparation department of catering facility were selected for the treatments. According to the results, appreciable reductions were achieved in total aerobic mesophilic bacterial counts of the ultraviolet treated samples (maximum difference 2.61 log cfu/cm2) and the ultrasound treated samples (maximum difference 4.07 log cfu/cm2). After ultraviolet treatment, Salmonella spp. were totally inhibited on the contaminated surfaces. Furthermore, Escherichia coli/coliform was not detected in the samples after both treatments whereas it was detected before the treatments. It has been concluded that the techniques are effective in reducing microbiological load and also ultraviolet treatment is effective on pathogenic microorganisms on food contact surfaces. As a result, the ultraviolet and ultrasound techniques are effective treatments for equipment disinfection in the catering sector and can be used industrially as it gives successful results.

The Impact of a Pulsed Light Stream on the Quality and Durability of the Cold-Stored Longissimus Dorsal Muscle of Pigs

The purpose of this study was to investigate the effect of pulsed light application (exposure to a pulsed light beam (PL) of 400 Hz for a period of 60 s, with an energy dose of 600 mW and wavelengths of 660 and 405 nm) on the physicochemical, technological, and sensory properties, as well as the nutritional value and shelf life of cold-storage pig longissimus dorsi muscle. Each muscle was divided into six parts, three of which were control samples, and the rest were exposed to pulsed light. The detailed laboratory tests of the meat were conducted 1, 7, and 10 days after slaughter. The meat was cold stored at +3 °C ± 0.5 °C. The study showed that the application of pulsed light has a favorable effect on lowering the TBARS index, oxidation-reduction potential, and water activity values. In addition, the application of PL had no statistically significant effect on the variation in the perception of selected sensory characteristics of meat. Furthermore, PL processing, as a low-energy-intensive method that can be environmentally friendly and thus have a large potential for implementation, is an innovative way to extend the shelf life, especially of raw meat, without a negative impact on its quality. This is of particular importance for food security (especially in the quantitative and qualitative aspects of food, but also in terms of food safety).

Optimization of UV-C light and lactic acid combined treatment in decontamination of sliced Brazilian dry-cured loin: Salmonella Typhimurium inactivation and physicochemical quality

This study aimed to test the effect of UV-C light (0.01-0.64 J/cm²) (UV) and lactic acid (0.1-12.9%) (LA) combined treatment on sliced Brazilian dry-cured loin (Socol, BDL) for (i) Salmonella Typhimurium reduction, (ii) physicochemical changes (color (a*, cured color, and ΔE), protein and lipid oxidation) and (iii) optimization using response surface methodology (RSM). Linear inactivation rate was achieved and UV was 2-fold more efficient than LA to inactivate S. Typhimurium. At the same time these combined technologies increased lipid (linear rate, R²_adj = 0.88), protein oxidation (quadratic rate, R²_adj = 0.86) and meat discoloration. Furthermore, the minimum point of the physicochemical changes was obtained using RSM, and the decontamination process was optimized. Hence, a reduction of 1.3 log cfu/g was achieved using 0.36 J/cm² of UV and 7.7% of LA. These combined methods represent a promising industrial intervention strategy to dry-meat safety and quality.

Comparison of pulsed light inactivation kinetics and modeling of Escherichia coli (ATCC-29055), Clostridium sporogenes (ATCC-7955) and Geobacillus stearothermophilus (ATCC-10149)

Pulsed light (PL) inactivation kinetics of Escherichia coli K-12, Clostridium sporogenes and Geobacillus stearothermophilus were evaluated under different treatment conditions. The PL system was factory set to operate at three pulses per second with a pulse width of 360 μs exposing samples placed on one of the 9 trays on a rack. Two PL parameters were evaluated in the study: number of pulses (a time factor) and the tray position (a spatial distance factor) both influencing the amount of light energy absorbed. As expected, the level of microbial inactivation increased with an increase in the number of pulses (from 1 to 15) and decreased with an increase in the Spatial distance (Tray # 1 to 9) away from the light source. Both the number of pulses and spatial distance as well as their interactions were found to have a significant effect (P < 0.05) on the extent of microbial inactivation. Vegetative cells of E. coli were most sensitive to PL treatment with a maximum 5 logarithmic reductions on Tray 1 after a 12-pulse treatment (4 s). G. stearothermophilus was more resistant to PL than C. sporogenes. Overall, the PL treatments (12-15 pulses) achieved a minimum four logarithmic reductions in the populations of all three microorganisms on the top tray at doses still below 12 J/cm², the FDA-approved limit.

Applications of Pulsed Light Decontamination Technology in Food Processing: An Overview

Consumers of the 21st century tend to be more aware and demand safe as well as nutritionally balanced food. Unfortunately, conventional thermal processing makes food safe at the cost of hampering nutritional value. The food industry is trying to develop non-thermal processes for food preservation. Pulsed light (PL) is one such emerging non-thermal food processing method that can decontaminate food products or food contact surfaces using white light. Exposure to intense light pulses (in infrared, visible, and ultraviolet (UV) regions) causes the death of microbial cells, rendering the food safe at room temperature. PL technology is an excellent and rapid method of disinfection of product surfaces and is increasingly being used for food surfaces and packaging decontamination, enabling the minimal processing of food. This paper aims to give an overview of the latest trends in pulsed light research, discuss principles of pulse generation, and review applications of various PL systems for the inactivation of microorganisms in vitro, in various food products, and on food contact surfaces. Effects of PL on food quality, challenges of the process, and its prospects are presented.

Antimicrobial Coatings for Food Contact Surfaces: Legal Framework, Mechanical Properties, and Potential Applications

Food contact surfaces (FCS) in food processing facilities may become contaminated with a number of unwanted microorganisms, such as Listeria monocytogenes, Escherichia coli O157:H7, and Staphylococcus aureus. To reduce contamination and the spread of disease, these surfaces may be treated with sanitizers or have active antimicrobial components adhered to them. Although significant efforts have been devoted to the development of coatings that improve the antimicrobial effectiveness of FCS, other important coating considerations, such as hardness, adhesion to a substrate, and migration of the antimicrobial substance into the food matrix, have largely been disregarded to the detriment of their translation into practical application. To address this gap, this review examines the mechanical properties of antimicrobial coatings (AMC) applied to FCS and their interplay with their antimicrobial properties within the framework of relevant regulatory constraints that would apply if these were used in real-world applications. This review also explores the various assessment techniques for examining these properties, the effects of the deposition methods on coating properties, and the potential applications of such coatings for FCS. Overall, this review attempts to provide a holistic perspective. Evaluation of the current literature urges a compromise between antimicrobial effectiveness and mechanical stability in order to adhere to various regulatory frameworks as the next step toward improving the industrial feasibility of AMC for FCS applications.

Identifying Suitable Listeria innocua Strains as Surrogates for Listeria monocytogenes for Horticultural Products

A laboratory-based study testing 9 Listeria innocua strains independently and a cocktail of 11 Listeria monocytogenes strains was carried out. The aim was to identify suitable L. innocua strain(s) to model L. monocytogenes in inactivation experiments. Three separate inactivation procedures and a hurdle combination of the three were employed: thermal inactivation (55°C), UV-C irradiation (245 nm), and chemical sanitizer (TsunamiTM 100, a mixture of acetic acid, peroxyacetic acid, and hydrogen peroxide). The responses were strain dependent in the case of L. innocua with different strains responding differently to different regimes and L. innocua isolates generally responded differently to the L. monocytogenes cocktail. In the thermal inactivation treatment, inactivation of all strains including the L. monocytogenes cocktail plateaued after 120 min. In the case of chemical sanitizer, inactivation could be achieved at concentrations of 10 and 20 ppm with inactivation increasing with contact time up to 8 min, beyond which there was no significant benefit. All L. innocua strains except PFR16D08 were more sensitive than the L. monocytogenes cocktail to the hurdle treatment. PFR16D08 almost matched the resistance of the L. monocytogenes cocktail but was much more resistant to the individual treatments. A cocktail of two L. innocua strains (PFR 05A07 and PFR 05A10) had the closest responses to the hurdle treatment to those of the L. monocytogenes cocktail and is therefore recommended for hurdle experiments.

Nonthermal physical technologies to decontaminate and extend the shelf-life of fruits and vegetables: Trends aiming at quality and safety

Minimally processed fruits and vegetables are one of the major growing sectors in food industry. This growing demand for healthy and convenient foods with fresh-like properties is accompanied by concerns surrounding efficacy of the available sanitizing methods to appropriately deal with food-borne diseases. In fact, chemical sanitizers do not provide an efficient microbial reduction, besides being perceived negatively by the consumers, dangerous for human health, and harmful to the environment, and the conventional thermal treatments may negatively affect physical, nutritional, or bioactive properties of these perishable foods. For these reasons, the industry is investigating alternative nonthermal physical technologies, namely innovative packaging systems, ionizing and ultraviolet radiation, pulsed light, high-power ultrasound, cold plasma, high hydrostatic pressure, and dense phase carbon dioxide, as well as possible combinations between them or with other preservation factors (hurdles). This review discusses the potential of these novel or emerging technologies for decontamination and shelf-life extension of fresh and minimally processed fruits and vegetables. Advantages, limitations, and challenges related to its use in this sector are also highlighted.

Pulsed Light Treatment of Different Food Types with a Special Focus on Meat: A Critical Review

Today, the increasing demand for minimally processed foods that are at the same moment nutritious, organoleptically satisfactory, and free from microbial hazards challenges the research and development to establish alternative methods to reduce the level of bacterial contamination. As one of the recent emerging nonthermal methods, pulsed light (PL) constitutes a technology for the fast, mild, and residue-free surface decontamination of food and food contact materials in the processing environment. Via high frequency, high intensity pulses of broad-spectrum light rich in the UV fraction, viable cells as well as spores are inactivated in a nonselective multi-target process that rapidly overwhelms cell functions and subsequently leads to cell death. This review provides specific information on the technology of pulsed light and its suitability for unpackaged and packaged meat and meat products as well as food contact materials like production surfaces, cutting tools, and packaging materials. The advantages, limitations, risks, and essential process criteria to work efficiently are illustrated and discussed with relation to implementation on industrial level and future aspects. Other issues addressed by this paper are the need to take care of the associated parameters such as alteration of the product and utilized packaging material to satisfy consumers and other stakeholders.

Sustainable and consumer-friendly emerging technologies for application within the meat industry: An overview

New and emerging robust technologies can play an important role in ensuring a more resilient meat value chain and satisfying consumer demands and needs. This paper outlines various novel thermal and non-thermal technologies which have shown potential for meat processing applications. A number of process analytical techniques which have shown potential for rapid, real-time assessment of meat quality are also discussed. The commercial uptake and consumer acceptance of novel technologies in meat processing have been subjects of great interest over the past decade. Consumer focus group studies have shown that consumer expectations and liking for novel technologies, applicable to meat processing applications, vary significantly. This overview also highlights the necessity for meat processors to address consumer risk-benefit perceptions, knowledge and trust in order to be commercially successful in the application of novel technologies within the meat sector.

Inactivation of Escherichia coli O157:H7 and Listeria monocytogenes in biofilms by pulsed ultraviolet light

BACKGROUND

The inactivation of biofilms formed by pathogenic bacteria on ready-to-eat and minimally processed fruits and vegetables by nonthermal processing methods is critical to ensure food safety. Pulsed ultraviolet (PUV) light has shown promise in the surface decontamination of liquid, powdered, and solid foods. In this study, the antimicrobial efficacy of PUV light treatment on nascent biofilms formed by Escherichia coli O157:H7 and Listeria monocytogenes on the surfaces of food packaging materials, such as low-density polyethylene (LDPE), and fresh produce, such as lettuce (Lactuca sativa) leaves, was investigated.

RESULTS

The formation of biofilms on Romaine lettuce leaves and LDPE films was confirmed by crystal violet and Alcian blue staining methods. Inactivation of cells in the biofilm was determined by standard plating procedures, and by a luminescence-based bacterial cell viability assay. Upon PUV treatment of 10 s at two different light source to sample distances (4.5 and 8.8 cm), viable cell counts of L. monocytogenes and E. coli O157:H7 in biofilms on the lettuce surface were reduced by 0.6-2.2 log CFU mL(-1) and 1.1-3.8 log CFU mL(-1), respectively. On the LDPE surface, the efficiency of inactivation of biofilm-encased cells was slightly higher. The maximum values for microbial reduction on LDPE were 2.7 log CFU mL(-1) and 3.9 log CFU mL(-1) for L. monocytogenes and E. coli O157:H7, respectively. Increasing the duration of PUV light exposure resulted in a significant (P < 0.05) reduction in biofilm formation by both organisms. The results also revealed that PUV treatment was more effective at reducing E. coli biofilms compared with Listeria biofilms. A moderate increase in temperature (~7-15°C) was observed for both test materials.

CONCLUSIONS

PUV is an effective nonthermal intervention method for surface decontamination of E. coli O157:H7 and L. monocytogenes on fresh produce and packaging materials.

Relevant factors affecting microbial surface decontamination by pulsed light

Pulsed Light (PL) uses intense flashes of white light rich in ultraviolet (UV) light for decontamination. A log-reduction higher than 5 was obtained in one flash and at fluences lower than 1.8J/cm(2) on spores of a range of spore-forming bacteria, of vegetative cells of non-spore-forming bacteria and on yeasts spread on agar media. Vegetative cells were more sensitive than spores. The inactivation by PL of Bacillus subtilis, B. atrophaeus, B. cereus, Geobacillus stearothermophilus, and Aspergillus niger spores sprayed on polystyrene was similar. The inactivation by PL of B. subtilis and A. niger spores sprayed on glass was slightly lower than on polystyrene. No alteration of the spore structures was detected by scanning electron microscopy for both PL treated B. subtilis and A. niger spores. The inactivation of spores of B. subtilis, B. atrophaeus, B. cereus and B. pumilus by PL or by continuous UV-C at identical fluences was not different, and was much higher by PL for A. niger spores. The increase in the input voltage of the lamps (which also increases the UV-C %) resulted in a higher inactivation. There was no correlation between the resistance to heat and the resistance to PL. The relative effect of UV-C radiations and light thermal energy on PL inactivation was discussed.