Effects of drying and grinding in production of fruit and vegetable powders: A review

Foodomics uncovers functional and volatile metabolite dynamics in red raspberry chewable tablet optimized processing

Raspberries are known to contain valuable metabolites and possess a robust antioxidant capacity. However, the impact of different tablet processing stages on the nutritional content and flavor profile of raspberries remains unclear. The dynamic profile of functional and volatile metabolites was investigated through foodomics combined with UPLC-MS/MS-based widely targeted metabolomics and HS-SPME-GC-MS, and antioxidant capacities were assessed during tablet processing. 1336 functional metabolites and 645 volatile metabolites were identified. Results indicated tablets retained 34% ∼ 61% of the total volatile contents. In addition, the conversion intensity of functional metabolites was consistent with the order of "Tableting > Freeze-drying > Crushing". Compared to raspberry, tablets showed higher antioxidant activity, which was positively correlated with vitamin contents. This study elucidated that tablet formation demonstrated advantages in antioxidation and aroma retention, which may provide insights for enhancing quality during the tableting process.

Effects of different postharvest drying processes on flavonoid content and enzymatic activity of Styphnolobium japonicum (L.) Schott flowers for industrial and medicinal use

Traditionally, fresh S. japonicum flowers (SJF) and S. japonicum flowers buds (SJFB) are dried prior to further processing and use. Here, we investigated the ways in which drying techniques, including sun drying (SD), steam drying (STD), microwave drying (MD), hot air drying (HAD, 40 °C, 60 °C, 80 °C, 100 °C), and freeze drying (FD), alter the flavonoid composition of freshly-harvested SJF and SJFB. The flavonoid content of dried samples was determined by Ultra High Performance Liquid Chromatography-Diode Array Detector (UPLC-DAD). Overall, different drying techniques had significantly different effects on the RU content, ranging from 10.63 % (HAD-80 °C) to 34.13 % (HAD-100 °C) in SJF and from 18.91 % (HAD-100 °C) to 29.16 % (HAD-40 °C) and 30.53 % (SD) in SJFB. To clarify the mechanism by which drying affects the RU content of S. japonicum flowers, we studied the activity of a rutin-hydrolyzing enzyme (RHE) isolated from SJF and SJFB using multiple separation and assay methods. According to the Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE) results, the apparent molecular weight of the purified RHE was approximately 38 kDa. According to UPLC-DAD, RHE catalyzes the production of quercetin (QU) from rutin (RU), but not from other flavonoid glycosides. Drying fresh SJF and SJFB at low and high temperatures can inhibit RHE activity and prevent RU hydrolysis. Therefore, subjecting freshly-harvest SJF to HAD-100 °C, and freshly-harvest SJFB to SD or HAD-40 °C, can greatly increase the RU content. In particular, HAD is viable for large-scale application due to its simplicity and industrial feasibility.

Nutrient and Bioactive Fraction Content of Olea europaea L. Leaves: Assessing the Impact of Drying Methods in a Comprehensive Study of Prominent Cultivars in Morocco

This study explores the potential of olive leaves, long integral to Mediterranean traditional medicine, as a rich source of valuable compounds. The challenge lies in their considerable water content, hindering these compounds' full valorization. Four drying methods (air-drying, oven-drying, freeze-drying and solar-drying) were investigated for their impact on nutrient and bioactive compound content in the leaves of four olive varieties ("Arbequina", "Koroneiki", "Menara" and "Picholine Marocaine") cultivated in Morocco. In their fresh state, "Picholine Marocaine" exhibited the highest protein levels (6.11%), "Arbequina" had the highest phenolic content (20.18 mg gallic acid equivalents/g fresh weight (FW)), and "Koroneiki" and "Menara" were highest in flavonoids (3.28 mg quercetin equivalents/g FW). Specific drying methods proved optimal for different varieties. Oven-drying at 60 °C and 70 °C effectively preserved protein, while phenolic content varied with drying conditions. Air-drying and freeze-drying demonstrated effectiveness for flavonoids. In addition, an analytical approach using high-performance liquid chromatography and diode array detection (HPLC-DAD) was applied to investigate the effects of the different drying methods on the bioactive fraction of the analyzed samples. The results showed qualitative and quantitative differences depending on both the variety and the drying method used. A total of 11 phenolic compounds were tentatively identified, with oleuropein being the most abundant in all the samples analyzed. The freeze-dried samples showed the highest content of oleuropein in the varieties "Arbequina" and "Picholine Marocaine" compared to the other methods analyzed. In contrast, "Koroneiki" and "Menara" had higher oleuropein content when air dried. Overall, the obtained results highlight the importance of tailored drying techniques for the preservation of nutrients and bioactive compounds in olive leaves.

Methylxanthine and Flavonoid Contents from Guarana Seeds (Paullinia cupana): Comparison of Different Drying Techniques and Effects of UV Radiation

Guarana seeds are typically processed using one of three drying methods: traditional sun exposure, greenhouse drying, or the alguidar oven technique. In our research, we evaluated the contents of methylxanthines and flavan-3-ols in sun- and alguidar-dried guarana seeds from Bahia State's Low Sul Identity Territory. Caffeine, theobromine, catechin, and epicatechin were determined by high-performance liquid chromatography with UV-visible detection (HPLC/UV-vis). Statistical tools, including analysis of variance (ANOVA), Tukey's test, and exploratory analysis, were employed to analyze the obtained data. Our findings indicated that the flavan-3-ols content in sun-dried guarana samples was lower compared to those dried using the alguidar oven, possibly due to exposure to ultraviolet radiation from solar energy. Conversely, we observed no significant differences (p > 0.05) in the average contents of methylxanthines between the two drying methods. Our supplementary experiments involving UV-A and UV-C radiation lamps revealed a decreasing trend in methylxanthines and flavan-3-ols contents with increasing duration of UV radiation exposure.

Comparison of dehydration systems in quality and chemical effects on sunflower seeds

The present work investigates the quality and the chemical effects of dehydration, using a novel dehydration system based on an electromagnetic induction and low pressures technique, comparing it with the thermo-solar drying system. High oleic sunflower seeds, which are an important oil seed crop, were used due to the fact that they have a special place in the food industry. The seed samples were exposed to electromagnetic induction and low pressures by 0.5 and 1 h, then several chemical characterizations were carried out, in the electrophoresis study, it was found that most proteins in the hull were degraded or denatured, some of them were lost during the time in the thermosolar dryer while in kernel keeps 94.9% of the concentration in control proteins. Otherwise, the electromagnetic induction dryer did not lose the most of proteins in the kernel keeping 99.1% in 0.5 h and 98.4% in 1 h, just degrading its concentration. Germination viability results did not show changes after 0.5 h in the electromagnetic fields, but they decreased in 1 h from 66 to 40% until the thermosolar method fell to 24% in 4 h, both analysis results change proportionally with the treatment time and moisture content and the amount of the oxygen.

Exploring conventional and emerging dehydration technologies for slurry/liquid food matrices and their impact on porosity of powders: A comprehensive review

The contribution of dehydration to the growing market of food powders from slurry/liquid matrices is inevitable. To overcome the challenges posed by conventional drying technologies, several innovative approaches have emerged. However, industrial implementation is limited due to insufficient information on the best-suited drying technologies for targeted products. Therefore, this review aimed to compare various conventional and emerging dehydration technologies (such as active freeze, supercritical, agitated thin-film, and vortex chamber drying) based on their fundamental principles, potential applications, and limitations. Additionally, this article reviewed the effects of drying technologies on porosity, which greatly influence the solubility, rehydration, and stability of powder. The comparison between different drying technologies enables informed decision-making in selecting the appropriate one. It was found that active freeze drying is effective in producing free-flowing powders, unlike conventional freeze drying. Vortex chamber drying could be considered a viable alternative to spray drying, requiring a compact chamber than the large tower needed for spray drying. Freeze-dried, spray freeze-dried, and foam mat-dried powders exhibit higher porosity than spray-dried ones, whereas supercritical drying produces nano-porous interconnected powders. Notably, several factors like glass transition temperature, drying technologies, particle aggregation, agglomeration, and sintering impact powder porosity. However, some binders, such as maltodextrin, sucrose, and lactose, could be applied in controlled agglomeration to enhance powder porosity. Further investigation on the effect of emerging technologies on powder properties and their commercial feasibility is required to discover their potential in liquid drying. Moreover, utilizing clean-label drying ingredients like dietary fibers, derived from agricultural waste, presents promising opportunities.

Comparison of different drying methods for bergamot peel: Chemical and physicochemical properties

This study examines the effectiveness of seven drying methods applied to bergamot peels, encompassing hot air, microwave, infrared-assisted microwave, freeze, infrared, sun, and oven drying. All samples exhibited moisture content and water activity levels within the acceptable range for dry foods. All methods effectively transformed the peels into powdered form, yielding comparable results. Each method offers distinct advantages and disadvantages, and the choice of method should be based on the desired properties of the final product. The highest ascorbic acid content was found in freeze-dried and hot air-dried samples (>400 mg/100 g), whereas sun-dried samples had the lowest (89.58 mg/100 g). Infrared-dried samples exhibited the highest levels of total phenolics and flavonoids (193.40 and 530.14 mg/100 g, respectively), attributed to reactions induced by elevated temperatures. The total carotenoids were higher in freeze-dried samples (54.12 mg/100 g) compared to other drying methods (<27 mg/100 g). Microwave-dried samples had the highest 5-hydroxymethylfurfural content (73.06 mg/100 g), and freeze-dried samples had the highest naringin content (1568.70 mg/100 g). Although infrared drying had good particle density, porosity, and fluidity, freeze-drying was the most effective, retaining the highest levels of bioactive compounds. Among the methods studied, freeze-drying is recommended due to its superior ability to preserve bioactive compounds. Infrared and infrared-assisted drying methods were suitable for recovering phenolics from bergamot waste, offering lower energy consumption and practical preservation of physicochemical properties. This study emphasizes the importance of selecting the appropriate drying method to ensure high-quality dried food and producing value-added products from bergamot waste, contributing to sustainable agriculture and waste reduction. PRACTICAL APPLICATION: This study demonstrates that infrared and freeze-drying are the most effective methods for producing high-quality bergamot peel samples with enhanced antioxidant properties. These findings hold promising implications for the food industry, offering a viable approach to preserve bergamot peels and their valuable attributes.

An Update on Recent Studies Focusing on the Antioxidant Properties of Salvia Species

Nutrition has crucial effects and a significant role in disease prevention. Recently, nutraceuticals have attracted much attention in scientific research due to their pleiotropic effects and relatively non-toxic behavior. Among the biological effects displayed by plants belonging to the Lamiaceae family, such as antibacterial, anticancer, anti-inflammatory, and anticholinesterase, sage is well known for its antioxidant properties and is a rich source of numerous compounds that are biologically active, amongst them polyphenols, with more than 160 types identified. In this review we summarized some of the significant studies published in the last decade reporting the most employed extraction methods and the different assays that are useful for establishing the antioxidant properties of some sage species. Even though the scientific literature contains plenty of data regarding the antioxidant properties of many sage species, further studies are needed in order to gain a deeper understanding of the mechanism of action and the compounds responsible for their antioxidant activity. Finally, it should be taken into account that the data on the antioxidant properties of sage extracts are often difficult to compare with each other, since a series of variables in the extraction procedures, the type of assay used, and standardization may affect the final result.

Comparison of different drying technologies for brocade orange (Citrus sinensis) peels: Changes in color, phytochemical profile, volatile, and biological availability and activity of bioactive compounds

This study evaluated the effects of freeze drying (FD), heat pump drying (HPD), microwave drying (MD), and far-infrared drying (FID) on the quality of brocade orange peels (BOPs). Although the most attractive appearance, maximum levels of ascorbic acid (0.46 mg/g dry weight (DW)), carotenoids (total 16.34 μg/g DW), synephrine (15.58 mg/g DW), limonoids (total 4.60 mg/g DW), phenols (total 9142.80 μg/g DW), and antioxidant activity were observed in FD-BOPs, many aroma components in FD-BOPs were in the minimum levels. HPD-, and MD-BOPs depicted similar trends to FD-BOPs, but they contained the highest concentrations of limonene and β-myrcene. Phenols and ascorbic acid in MD-BOPs generally featured the highest levels of bioavailability, being to 15.99% and 63.94%, respectively. In comparison, FID was not beneficial for the preservation of bioactive compounds and volatile. Therefore, considering time and energy costs, HPD and particularly MD are more appropriate for the commercial production of dried BOPs.

Safety improvement of the open sun dried Egyptian Siwi dates using closed solar dryer

Egyptian Siwi dates dried using the open sun drying is exposed to different contaminants. So, the current study aims to use the closed solar dryer to improve Siwi date safety. The impact of washing and closed solar drying on the levels of microbial load, aflatoxins and heavy metals in Egyptian Siwi dates (ESD), in comparison to traditional open sun drying methods were examined. Two different drying techniques were employed to dry 300 kg of ESD. The microbial load was assessed following the two drying procedures. The levels of aflatoxins and heavy metals were analyzed using High-performance liquid chromatography (HPLC) and Inductively Coupled Plasma (ICP) techniques, respectively, after both drying methods. Additionally, the influence of storage time on the microbial load of the ESD was also evaluated using standard methods. The findings of the current study demonstrated that the closed solar drying significantly reduced the total bacterial and fungal counts by 96 % and 93 %, respectively, when compared to open sun-drying. No aflatoxins were detected in both fresh Siwi dates and Siwi dates dried using closed solar drying. However, after open sun drying, two aflatoxins; aflatoxin B1 (AFB1) and aflatoxin G1 (AFG1), were detected in the ESD, with concentrations of 0.95 and 0.23 μg kg-1, respectively. The closed solar drying significantly decreased the levels of lead (Pb), cadmium (Cd), copper (Cu), nickel (Ni), chromium (Cr), zinc (Zn), manganese (Mn), and iron (Fe) in the dried dates by 96 %, 94 %, 48 %, 71 %, 64 %, 4 %, 26 %, and 7 %, respectively, when compared to open sun drying. The stored Siwi dates that was exposed to the open sun drying showed a higher increase in bacterial (4.86 log CFU/g) and fungal (4.46 log CFU/g) counts. However, the stored Siwi dates that was exposed to the closed solar dryer showed a lower increase in bacterial (3.21 log CFU/g) and fungal (2.51 log CFU/g) counts. So, the duration of storage significantly impacted the microbial loads of the closed solar dried dates as compared to open sun drying. Overall, closed solar drying reduced the levels of investigated contaminants and extended the shelf life of ESD, thereby enhancing their safety for human consumption.

New anti-α-Glucosidase and Antioxidant Ingredients from Winery Byproducts: Contribution of Alkyl Gallates

Wine-making activity entails the production of solid and semisolid byproducts (grape stems and pomace and wine lees) that negatively impact the environment and industrial sustainability. Their features as sources of bioactive compounds support valorization procedures for functional and healthy ingredients. This work uncovers the quantitative alkyl gallates (gallic acid esters, C1-C12) profile of fresh (freeze-dried) materials and the effect of oven-drying on their stability by UHPLC-ESI-QqQ-MS/MS. The functionality was established concerning DPPH• scavenging and antihyperglycemic power. Wine lees exerted the highest high-free concentration of galloyl derivatives, ethyl gallate being the most abundant ester (3472.62 ng/g dw, on average). About the impact of the stabilization process, although as a general trend, the thermal treatment reduced the concentration, the reduction dimensions depended on the compound/matrix, remaining in valuable concentrations. Concerning radical scavenging, ze-dried stems and pomace displayed the highest capacity (24.11 and 18.46 mg TE/g dw, respectively), being correlated with propyl gallate (r2 = 0.690), butyl gallate (r2 = 0.686), and octyl gallate (r2 = 0.514). These two matrices exerted α-glucosidase inhibitory activity (1.58 and 1.46 units/L) equivalent to that of acarbose (a recognized α-glucosidase inhibitor). The newly described bioactive phytochemicals in winery residues (galloyl esters) and their correlation with functional traits allow for envisioning valorization alternatives.

A Functional End-Use of Avocado (cv. Hass) Waste through Traditional Semolina Sourdough Bread Production

In recent years, a main goal of research has been to exploit waste from agribusiness industries as new sources of bioactive components, with a view to establishing a circular economy. Non-compliant avocado fruits, as well as avocado seeds and peels, are examples of promising raw materials due to their high nutritional yield and antioxidant profiles. This study aimed to recycle avocado food waste and by-products through dehydration to produce functional bread. For this purpose, dehydrated avocado was reduced to powder form, and bread was prepared with different percentages of the powder (5% and 10%) and compared with a control bread prepared with only semolina. The avocado pulp and by-products did not alter organoleptically after dehydration, and the milling did not affect the products' color and retained the avocado aroma. The firmness of the breads enriched with avocado powder increased due to the additional fat from the avocado, and alveolation decreased. The total phenolic content of the fortified breads was in the range of 2.408-2.656 mg GAE/g, and the antiradical activity was in the range of 35.75-38.235 mmol TEAC/100 g (p < 0.0001), depending on the percentage of fortification.

Impact of Processing and Physicochemical Parameter on Hibiscus sabdariffa Calyxes Biomolecules and Antioxidant Activity: From Powder Production to Reconstitution

Hibiscus sabdariffa is a tropical plant with red calyxes whose anthocyanins, phenols, and antioxidant activity make it attractive to consumers both from a nutritional and medicinal standpoint. Its seasonality, perishability, and anthocyanin instability, led to the setup of stabilization methods comprising drying and powdering. However, its properties can often be altered during these stabilization processes. Treatments such as dehumidified-air-drying, infrared drying, and oven-drying, and their combination showed better quality preservation. Moreover, powder production enables superior biomolecule extractability which can be linked to a higher bioaccessibility. However, the required temperatures for powder production increase the bioactive molecules degradation leading to their antioxidant activity loss. To overcome this issue, ambient or cryogenic grinding could be an excellent method to improve the biomolecule bioavailability and accessibility if the processing steps are well mastered. To be sure to benefit from the final nutritional quality of the powder, such as the antioxidant activity of biomolecules, powders have to offer excellent reconstitutability which is linked to powder physicochemical properties and the reconstitution media. Typically, the finest powder granulometry and using an agitated low-temperature reconstitution media allow for improving anthocyanin extractability and stability. In this review, the relevant physicochemical and processing parameters influencing plant powder features from processing transformation to reconstitution will be presented with a focus on bioactive molecules and antioxidant activity preservation.

Edible gum addition improves the quality of freeze-dried restructured strawberry blocks

Freeze-dried restructured strawberry blocks (FRSB) have become an increasingly popular product. In this study, the effects of six edible gums (guar gum, gelatin, xanthan gum, pectin, konjac gum, and carrageenan) on the FRSB quality were investigated. For FRSBs, compared with those in untreated samples, the 0.6 % guar gum addition increased texture profile analysis (TPA) hardness, chewiness, and puncture hardness by 29.59%, 174.86%, and 25.34%, respectively; after the 0.6% gelatin addition, the sensory evaluation sourness was reduced by 8.58%, whereas yield, TPA chewiness, and puncture hardness were increased by 3.40%, 28.62%, and 92.12%, respectively; with the 0.9% gelatin addition, the sensory evaluation sourness was reduced by 8.58%; with the 0.9% pectin addition, the yield, TPA hardness, chewiness, and puncture hardness were increased by 4.55%, 5.94%, 77.49%, and 103.62%, respectively. In summary, 0.6-0.9% pectin, gelatin, and guar gum addition are recommended to improve the main qualities of FRSBs.

Evaluation of the Antioxidant and Antiangiogenic Activity of a Pomegranate Extract in BPH-1 Prostate Epithelial Cells

Benign prostatic hypertrophy (BPH) is a noncancerous enlargement of the prostate gland that develops from hyper-proliferation of the stromal and epithelium region. Activation of pathways involving inflammation and oxidative stress can contribute to cell proliferation in BPH and tumorigenesis. Agricultural-waste-derived extracts have drawn the attention of researchers as they represent a valid and sustainable way to exploit waste production. Indeed, such extracts are rich in bioactive compounds and can provide health-promoting effects. In particular, extracts obtained from pomegranate wastes and by-products have been shown to exert antioxidant and anti-inflammatory effects. This study focused on the evaluation of the anti-angiogenic effects and chemopreventive action of a pomegranate extract (PWE) in cellular models of BPH. In our experimental conditions, we observed that PWE was able to significantly (p < 0.001) reduce the proliferation and migration rates (up to 60%), together with the clonogenic capacity of BPH-1 cells concomitantly with the reduction in inflammatory cytokines (e.g., IL-6, PGE2) and pro-angiogenic factor (VEGF-ADMA) release. Additionally, we demonstrated the ability of PWE in reducing angiogenesis in an in vitro model of BPH consisting in transferring BPH-1-cell-conditioned media to human endothelial H5V cells. Indeed, PWE was able to reduce tube formation in H5V cells through VEGF level reduction even at low concentrations. Overall, we confirmed that inhibition of angiogenesis may be an alternative therapeutic option to prevent neovascularization in prostate tissue with BPH and its transformation into malignant prostate cancer.

Physicochemical properties and Pb2+ adsorption capacity of freeze-dried hawthorn pectin fractions by gradient ethanol precipitation

Three fractions of FHP20, FHP40 and FHP60 were obtained from freeze-dried hawthorn pectin by gradient ethanol precipitation (20-60 %), and their physicochemical properties and adsorption performance on Pb²⁺ were investigated. It was found that the content of galacturonic acid (GalA) and esterification of FHP fractions gradually reduced with the increase of ethanol concentration. FHP60 had the lowest molecular weight (60.69 × 10³ Da), and the composition and proportion of monosaccharides were significantly different. The experimental results of Pb²⁺ adsorption showed that the adsorption process fitted well with the Langmuir monolayer adsorption and the pseudo-second-order models. Our findings suggested that pectin fractions with good homogeneity of molecular weight and chemical construction can be obtained by gradient ethanol precipitation, and hawthorn pectin could be developed as a potential adsorbent for Pb²⁺ removal.

Influence of Different Drying Methods on Anthocyanins Composition and Antioxidant Activities of Mangosteen (Garcinia mangostana L.) Pericarps and LC-MS Analysis of the Active Extract

Mangosteen pericarps (MP) often end up as agricultural waste despite being rich in powerful natural antioxidants such as anthocyanins and xanthones. This study compared the effect of different drying processes and times on phenolic compounds and antioxidant activities of MP. Fresh MP were subjected to 36 and 48 h of freeze-drying (-44 ± 1 °C) and oven-drying (45 ± 1 °C), and 30 and 40 h of sun-drying (31 ± 3 °C). The samples were analyzed for anthocyanins composition, total phenolic content (TPC), total flavonoid content (TFC), antioxidant activities, and color characteristics. Analysis of liquid chromatography-mass spectrometry (LC-MS) with electrospray ionization identified two anthocyanins in MP: cyanidin-3-O-sophoroside and cyanidin-3-O-glucoside. Overall, the drying process, time, and their interactions significantly (p < 0.05) influenced the phenolic compounds, antioxidant activities, and color in MP extracts. Both freeze-drying after 36 h (FD36) and 48 h (FD48) possessed significantly (p < 0.05) higher total anthocyanins (2.1-2.2 mg/g) than other samples. However, FD36 was associated with significantly (p < 0.05) higher TPC (~94.05 mg GAE/g), TFC (~621.00 mg CE/g), and reducing power (~1154.50 μmol TE/g) compared to FD48. Moreover, FD36 is more efficient for industrial applications due to less time and energy consumption. Subsequently, obtained dried MP extracts could be further utilized as an alternative to synthetic food colorants.

Protective Role of an Extract Waste Product from Citrus bergamia in an In Vitro Model of Neurodegeneration

A balanced diet, rich in fruits and vegetables and ensuring the intake of natural products, has been shown to reduce or prevent the occurrence of many chronic diseases. However, the choice to consume large quantities of fruits and vegetables leads to an increase in the amount of waste, which can cause an alteration in environmental sustainability. To date, the concept of a "byproduct" has evolved, now being understood as a waste product from which it is still possible obtain useful compounds. Byproducts in the agricultural sector are a rich source of bioactive compounds, capable of possessing a second life, decreasing the amount of waste products, the disposal costs, and environmental pollution. A promising and well-known citrus of the Mediterranean diet is the bergamot (Citrus bergamia, Risso et Poiteau). The composition of bergamot is known, and the rich presence of phenolic compounds and essential oils has justified the countless beneficial properties found, including anti-inflammatory, antioxidant, anti-cholesterolemic, and protective activity for the immune system, heart failure, and coronary heart diseases. The industrial processing of bergamot fruits leads to the formation of bergamot juice and bergamot oil. The solid residues, referred to as "pastazzo", are normally used as feed for livestock or pectin production. The fiber of bergamot (BF) can be obtained from pastazzo and could exert an interesting effect thanks to its content of polyphenols. The aims of this work were twofold: (a) to have more information (composition, polyphenol and flavonoid content, antioxidant activity, etc.) on BF powder and (b) to verify the effects of BF on an in vitro model of neurotoxicity induced by treatment with amyloid beta protein (Aβ). In particular, a study of cell lines was carried out on both neurons and oligodendrocytes, to measure the involvement of the glia and compare it with that of the neurons. The results obtained showed that BF powder contains polyphenols and flavonoids and that it is able to exercise an antioxidant property. Moreover, BF exerts a protective action on the damage induced by treatment with Aβ, and this defense is found in experiments on the cell viability, on the accumulation of reactive oxygen species, on the involvement of the expression of caspase-3, and on necrotic or apoptotic death. In all these results, oligodendrocytes were always more sensitive and fragile than neurons. Further experiments are needed, and if this trend is confirmed, BF could be used in AD; at the same time, it could help to avoid the accumulation of waste products.

Combined Pulsed Vacuum Osmotic Dehydration and Convective Air-Drying Process of Jambolan Fruits

Jambolan (Syzygium cumini) is a native fruit from Asia that has adapted well to the tropical climate of the Amazonian region. However, due to its limited annual availability and high perishability, the jambolan fruit is still underexploited. Thus, this study aimed to preserve the jambolan through a combined process of pulsed vacuum osmotic dehydration (PVOD) and convective air-drying and to monitor the total phenolic contents (TPCs) and total monomeric anthocyanins (TMAs) during these processes. To this end, jambolan fruits were pretreated with increasing PVOD times. After monitoring of moisture loss, solid gain, weight reduction, water activity, TPC, and TMA, pretreated (PT) and non-pretreated (NPT) fruits underwent convective air-drying (50-70 °C). The PVOD reduced half of the water present in the fruits; nonetheless, PVOD decreased the TPC and TMA over time. The increase in air-drying temperature shortened the drying time for both NPT and PT jambolan, and PVOD reduced even further the drying time of the fruits. Moreover, the fruits pretreated and dried at 60 °C showed promising results, potentially being a good alternative to extend the fruit's shelf life and make it available throughout the year.

Metabolomics and sensory evaluation of white asparagus ingredients in instant soups unveil important (off-)flavours

Split-stream processing of asparagus waste stream is a novel approach to produce spray-dried powder and fibre. Asparagus ingredients processed by this method and a commercial asparagus powder were compared by evaluating their flavour profile in a soup formulation. Professional sensory panel and untargeted metabolomics approaches using GC-MS and LC-MS were carried out. Unsupervised and supervised statistical analyses were performed to highlight discriminatory metabolites and correlate these to sensory attributes. The spray-dried powder scored higher on asparagus flavour compared to the commercial powder. The fibre negatively impacted the taste and mouthfeel of the soups. GC-O-MS confirmed the role of dimethyl sulphide, 2-methoxy-3-isopropyl pyrazine and 2-methoxy-3-isobutyl pyrazine in asparagus odour. Seven new volatile compounds are also proposed to contribute to asparagus flavour notes, most of which were more abundant in the spray-dried powder. This research demonstrates the feasibility of upcycling asparagus waste streams into flavour-rich ingredients with good sensorial properties.

Valorization of Food Waste as Animal Feed: A Step towards Sustainable Food Waste Management and Circular Bioeconomy

The growing population and healthy food demands have led to a rise in food waste generation, causing severe environmental and economic impacts. However, food waste (FW) can be converted into sustainable animal feed, reducing waste disposal and providing an alternative protein source for animals. The utilization of FW as animal feed presents a solution that not only tackles challenges pertaining to FW management and food security but also lessens the demand for the development of traditional feed, which is an endeavour that is both resource and environmentally intensive in nature. Moreover, this approach can also contribute to the circular economy by creating a closed-loop system that reduces the use of natural resources and minimizes environmental pollution. Therefore, this review discusses the characteristics and types of FW, as well as advanced treatment methods that can be used to recycle FW into high-quality animal feed and its limitations, as well as the benefits and drawbacks of using FW as animal feed. Finally, the review concludes that utilization of FW as animal feed can provide a sustainable solution for FW management, food security, preserving resources, reducing environmental impacts, and contributing to the circular bioeconomy.

Effect of Calcination Temperature and Time on the Synthesis of Iron Oxide Nanoparticles: Green vs. Chemical Method

Nowadays, antioxidants and antibacterial activity play an increasingly vital role in biosystems due to the biochemical and biological reactions that involve free radicals and pathogen growth, which occur in many systems. For this purpose, continuous efforts are being made to minimize these reactions, including the use of nanomaterials as antioxidants and bactericidal agents. Despite such advances, iron oxide nanoparticles still lack knowledge regarding their antioxidant and bactericidal capacities. This includes the investigation of biochemical reactions and their effects on nanoparticle functionality. In green synthesis, active phytochemicals give nanoparticles their maximum functional capacity and should not be destroyed during synthesis. Therefore, research is required to establish a correlation between the synthesis process and the nanoparticle properties. In this sense, the main objective of this work was to evaluate the most influential process stage: calcination. Thus, different calcination temperatures (200, 300, and 500 °C) and times (2, 4, and 5 h) were studied in the synthesis of iron oxide nanoparticles using either Phoenix dactylifera L. (PDL) extract (green method) or sodium hydroxide (chemical method) as the reducing agent. The results show that calcination temperatures and times had a significant influence on the degradation of the active substance (polyphenols) and the final structure of iron oxide nanoparticles. It was found that, at low calcination temperatures and times, the nanoparticles exhibited small sizes, fewer polycrystalline structures, and better antioxidant activities. In conclusion, this work highlights the importance of green synthesis of iron oxide nanoparticles due to their excellent antioxidant and antimicrobial activities.

Recent Advances in Health Benefits of Bioactive Compounds from Food Wastes and By-Products: Biochemical Aspects

Bioactive compounds, including terpenoids, polyphenols, alkaloids and other nitrogen-containing constituents, exert various beneficial effects arising from their antioxidant and anti-inflammatory properties. These compounds can be found in vegetables, fruits, grains, spices and their derived foods and beverages such as tea, olive oil, fruit juices, wine, chocolate and beer. Agricultural production and the food supply chain are major sources of food wastes, which can become resources, as they are rich in bioactive compounds. The aim of this review is to highlight recent articles demonstrating the numerous potential uses of products and by-products of the agro-food supply chain, which can have various applications.

Biopolymer-Based Films Reinforced with Green Synthesized Zinc Oxide Nanoparticles

Nowadays, biopolymer-based films are being developed as an alternative to conventional plastic-based films, mainly because they are non-toxic, flexible, inexpensive, and widely available. However, they are restricted in their applications due to several deficiencies in their properties. Accordingly, the reinforcement of these materials with nanoparticles/nanofillers could overcome some of their shortcomings, especially those processed by green methods. Green synthesized zinc oxide nanoparticles (ZnO-NPs) are highly suggested to overcome these deficiencies. Therefore, the main aim of this work was to develop different biopolymer-based films from cellulose acetate (CA), chitosan (CH), and gelatin (GE) reinforced with ZnO-NPs prepared by casting, and to assess their different properties. The results show the improvements produced by the incorporation of ZnO-NPs (1% w/w) into the CA, CH, and GE systems. Thus, the water contact angles (WCAs) increased by about 12, 13, and 14%, while the water vapor permeability (WVP) decreased by about 14, 6, and 29%, the water solubility (WS) decreased by about 23, 6, and 5%, and the transparency (T) increased by about 19, 31, and 20% in the CA, CH, and GE systems, respectively. Furthermore, the mechanical properties were enhanced by increasing the ultimate tensile strength (UTS) (by about 39, 13, and 26%, respectively) and Young's modulus (E) (by about 70, 34, and 63%, respectively), thereby decreasing the elongation at the break (ε_max) (by about 56, 23, and 49%, respectively) and the toughness (by about 50, 4, and 30%, respectively). Lastly, the antioxidant properties were enhanced by 34, 49, and 39%, respectively.

Innovative Process for Dried Caper (Capparis spinosa L.) Powder Production

This research aimed to develop a new time, energy, and cost-saving production process for obtaining dried powder from Capparis spinosa floral buds. Four different trials, including dry salting with 40% NaCl (for 10 days and 40 days) and brine salting with 18% NaCl (at room temperature for 3 days and at 60 °C for 6 h), were carried out, and two different air-drying temperatures (40 and 50 °C) were used. The effects on chemical and sensory characteristics were investigated and compared with traditional undried caper samples. Spectroscopy and chromatographic techniques such as UV-VIS, GC-MS, and FTIR were used for chlorophylls, carotenoids, polyphenols, flavonoids, and volatile aroma compounds' analyses. Moreover, a sensory descriptive analysis and acceptability were applied to individuate the product most appreciated by the consumers. Among the different trials, brine salting at 60 °C and drying at 50 °C constituted the fastest process that yielded an appreciated powder by consumers; the chemical analyses demonstrated that this process did not lead to the formation of extraneous aroma compounds that could influence the typical sensory properties of capers and maintained high levels of chlorophylls, carotenoids, and polyphenols. Altogether, the results could be of great significance to industrial production and potentiate positive impacts on the economy of production areas.

Impact of Disruption and Drying Conditions on Physicochemical, Functional and Antioxidant Properties of Powdered Ingredients Obtained from Brassica Vegetable By-Products

Reintroducing waste products into the food chain, thus contributing to circular economy, is a key goal towards sustainable food systems. Fruit and vegetable processing generates large amounts of residual organic matter, rich in bioactive compounds. In Brassicaceae, glucosinolates are present as secondary metabolites involved in the biotic stress response. They are hydrolysed by the enzyme myrosinase when plant tissue is damaged, releasing new products (isothiocyanates) of great interest to human health. In this work, the process for obtaining powdered products from broccoli and white cabbage by-products, to be used as food ingredients, was developed. Residues produced during primary processing of these vegetables were transformed into powders by a process consisting of disruption (chopping or grinding), drying (hot-air drying at 50, 60 or 70 °C, or freeze drying) and final milling. The impact of processing on powders' physicochemical and functional properties was assessed in terms of their physicochemical, technological and antioxidant properties. The matrix response to drying conditions (drying kinetics), as well as the isothiocyanate (sulforaphane) content of the powders obtained were also evaluated. The different combinations applied produced powdered products, the properties of which were determined by the techniques and conditions used. Freeze drying better preserved the characteristics of the raw materials; nevertheless, antioxidant characteristics were favoured by air drying at higher temperatures and by applying a lower intensity of disruption prior to drying. Sulforaphane was identified in all samples, although processing implied a reduction in this bioactive compound. The results of the present work suggest Brassica residues may be transformed into powdered ingredients that might be used to provide additional nutritional value while contributing to sustainable development.

Effects of Drying Methods on the Physicochemical Aspects and Volatile Compounds of Lyophyllum decastes

In this study, fresh Lyophyllum decastes was dried using hot air drying (HAD), hot air combined with vacuum drying (HAVD), and vacuum freeze drying (VFD). Additionally, the quality and volatile compounds were analyzed. VFD achieved the best color retention, the highest rehydration capacity, and the slightest damaged tissue structure; however, it recorded the longest drying time and the highest energy consumption. HAD was the most energy-efficient of the three methods. Furthermore, the products with more hardness and elasticity were obtained by HAD and HAVD—this finding was convenient for transportation. In addition, GC-IMS demonstrated that the flavor components had significantly changed after drying. A total of 57 volatile flavor compounds was identified, and the aldehyde, alcohol, and ketone compounds were the primary ingredient of the L. decastes flavor component, whereby the relative content of the HAD sample was apparently higher than HAVD and VFD. Taken together, VFD was better at preserving the color and shape of fresh L. decastes, but HAD was more appropriate for drying L. decastes because of the lower energy consumption, and was more economical. Meanwhile, HAD could be used to produce a more intense aroma.

The role of emerging technologies in the dehydration of berries: Quality, bioactive compounds, and shelf life

•

Berries comprise essential nutrients necessary for healthy living.

•

Convective, vacuum, microwave, and freeze-drying are the most common methods.

•

Pre-treatments improve permeability, accelerate drying, and inactivate oxidation.

•

Combined methods are recommended to assure high quality of dehydrated berries.

Berries are among the fruits with the highest nutritional and commercial value. This paper reviews the conventional and emerging dehydration methods most commonly used as postharvest treatment and discusses their efficacy in maintaining and/or improving the nutritional and functional qualities of dried berries. The characteristics of the conventional methods (e.g., convective drying, freeze-drying, spray-drying, osmotic dehydration), their pre-treatments, their combination, and intermittent drying, as well as their potential disadvantages are discussed. The use of emerging dehydration techniques (e.g., electromagnetic radiation drying, explosion puffing drying, heat pump drying, low-pressure superheated steam drying, microwave drying) allows to improve the quality of the dried berries compared to conventional techniques, in addition to reducing drying times, increasing drying speed and energy efficiency. Finally, the use of pre-treatments and the combination of technologies can enhance the quality of the final product as a result of the improvement in the effectiveness of the dehydration process.

Mathematical Perspectives in the Variable Texture Products Cutting Process

The methods utilized to construct and identify the mathematical equation that characterizes the cutting of items with varied textures are presented in this work. Using laboratory equipment, the cutting process was carried out experimentally. The cutting energy was calculated based on the experimental results. The energy required to perform this process is directly influenced by the textural characteristics of the products used, as per the analysis of the experimental results obtained after the cutting process (density, humidity, products with or without peel). The gathered information was used to develop a general equation that would properly describe the process. Table Curve 3D software was used to create mathematical equations that define the relationship between input parameters, the type of product being cut, cutting speed, and output parameters, i.e., cutting energy. The equations that have the same correlation coefficient were discovered using the working methodology; it was specifically designed for this purpose.

Beneficial Effects of Standardized Extracts from Wastes of Red Oranges and Olive Leaves

The awareness of the large amount of waste produced along the food chain, starting in the agricultural sector and continuing across industrial transformation to the domestic context, has in recent years also aroused strong concern amongst the public, who are ing about the possible consequences that this could have on environmental sustainability, resource waste and human health. The aim of the present research is the recovery of substances with high added value from waste and by-products typical of the Mediterranean area, such as the residue from the industrial processing of red oranges, called pastazzo (peels, pulps and seeds), which is particularly rich in anthocyanins, flavanones and hydroxycinnamic acids, and has numerous nutraceutical properties, as well as the olive leaves coming from olive-tree pruning, which are rich in substances such as oleuropein, elenolic acid, hydroxytyrosol, tyrosol and rutin. The effect of Red Orange Extract (ROE) and Olive Leaf Extract (OLE) on HepG2 fatty storage capacity was assessed performing Oil Red O’ staining, and antioxidant properties of the extracts were evaluated following the steatosis model onset. Based on the results obtained, the preparation of natural extracts that are derived from these waste products can be useful for preventing, counteracting or delaying the onset of the complications of fatty liver disease, such as hepatic steatosis.

Effects of Different Processing Methods Based on Different Drying Conditions on the Active Ingredients of Salvia miltiorrhiza Bunge

Compared to the traditional processing method, fresh processing can significantly enhance the preservation of biologically active ingredients and reduce processing time. This study evaluated the influences of fresh and traditional processing based on different drying conditions (sun drying, oven drying and shade drying) on the active ingredients in the roots and rhizomes of S. miltiorrhiza. High-performance liquid chromatography (HPLC) was utilized to determine the contents of six active ingredients in the roots and rhizomes of S. miltiorrhiza. The data were analyzed by fingerprint similarity evaluation, hierarchical cluster analysis (HCA) and principal component analysis (PCA). The results suggest that compared to the traditional processing method, the fresh processing method may significantly increase the preservation of biologically active ingredients. Furthermore, the findings demonstrated that among the three drying methods under fresh processing conditions, the shade-drying (21.02–26.38%) method is most beneficial for retaining the active ingredients in the roots and rhizomes of S. miltiorrhiza. Moreover, the fingerprint analysis identified 17 common peaks, and the similarity of fingerprints among samples processed by different methods ranged from 0.989 to 1.000. Collectively, these results suggest novel processing methods that may improve the yield of active ingredients for S. miltiorrhiza and may be implemented for industrial production.

Green Synthesis of FexOy Nanoparticles with Potential Antioxidant Properties

Iron oxide nanoparticles (Fe_xO_y-NPs) are currently being applied in numerous high-tech sectors, such as in chemical sectors for catalysis and in the medical sector for drug delivery systems and antimicrobial purposes, due to their specific, unique and magnetic properties. Nevertheless, their synthesis is under continuous investigation, as physicochemical methods are considered expensive and require toxic solvents. Thus, green nanotechnology has shown considerable promise in the eco-biogenesis of nanoparticles. In the current study, Fe_xO_y-NPs were synthesized by two different methods: via green synthesis through the use of polyphenols, which were extracted from Phoenix dactylifera L.; and via chemical synthesis, in which the reducing agent was a chemical (NaOH), and iron chloride was used as a precursor. Thus, polyphenol extraction and its ability to produce nanoparticles were evaluated based on the drying temperature used during the Phoenix dactylifera L. recollection, as well as the extraction solvent used. The results highlight the potential of polyphenols present in Phoenix dactylifera L. for the sustainable manufacture of Fe_xO_y-NPs. Finally, green and chemical syntheses were compared on the basis of physicochemical characteristics and functional properties.

Physico-Chemical, Textural and Sensory Evaluation of Spelt Muffins Supplemented with Apple Powder Enriched with Sugar Beet Molasses

The present study investigated the effect of incorporating 10, 20, and 30% apple powder obtained by freeze-drying, and apple powder produced with osmotic pre-treatment in sugar beet molasses solution, into muffins. The powder was freeze-dried and introduced as a whole spelt wheat flour replacement in muffins. The obtained products were investigated for their chemical composition and technological properties, and were subjected to a sensory analysis as well as a consumer acceptance test. Increasing the substitution level from 0 to 30% apple powder lowered the protein, starch, and fat content, while moisture content, sugar, and cellulose showed the opposite trend. The sensory analysis results indicated that the addition of apple powder or apple powder with osmotic pre-treatment (apple OT+Lyo powder) to the ingredients of muffins positively affected the taste, smell, mastication, and appearance of the final product. Consumers rated the muffins with 30% apple OT+Lyo powder as the most acceptable. Principal component analysis, an artificial neural network, and global sensitivity analysis were utilized to differentiate among muffin samples, and to estimate the corresponding influence of the substitution of spelt flour with apple powder or apple OT powder on the observed quality and nutritional parameters of the muffins.

Advances in drying techniques for retention of antioxidants in agro produces

Antioxidants are compounds that are essential for the human body which prevents cell from disease causing free radicals. Antioxidants are present in a wide range of fruits, vegetables, and spices. However, a considerable amount of antioxidants is lost during the post-harvest drying operation of agro produces for their shelf-life enhancement. Hence, retention of antioxidants becomes utmost importance in preserving the nutritional aspects of fruits and vegetables. Compared to conventional hot air drying, methods like freeze drying, vacuum drying, and dehumidified drying helps in the retention of antioxidants. However, the drawbacks prevalent in current drying practices, such as high-power consumption and high capital cost, could be eliminated by adopting novel drying mechanisms. This review focuses on various pretreatment methods like ultra-sonication, high pressure processing, pulsed electric field and ethanol treatment prior to drying operation helps in enhancing the drying efficiency with maximum retention of antioxidants. In addition, hybrid drying technologies such as microwave assisted drying, IR-radiated drying and electro-magnetic assisted drying methods also could significantly improve the retention of antioxidants.HIGHLIGHTSDrying is the most commonly adopted unit operation for enhancing the shelf life of perishable agro produces.However, drying is accompanied by loss of bioactive, color, texture, and sensory attributes.Compared to conventional drying techniques like hot air drying, methods like freeze drying, vacuum drying and dehumidified drying helps in the retention of antioxidants present in agro/food produces.Pretreatment methods like Ozonation, ultra-sonication, and UV radiation prior to drying are also found to improve the drying performance with good retention of antioxidants.Recent developments like microwave-assisted and IR-assisted drying methods perform well in the retention of antioxidants with less energy consumption.

Appropriate Media for Noodles to Increase Food Consumption in School-Age Children

Lack of mineral and vitamin intake, especially from fruit and vegetable consumption at school age, can increase the risk of illness, impaired growth and development, and impaired adaptation to environmental hazards. This study aims to analyze the effect of educational media with processed noodles on the acceptance and consumption of vegetables and fruit in elementary school children. This type of research is quasi-experimental, with a pre and post design approach. Data collection techniques were carried out using a Comstock visual checklist sheet and a recall form to see vegetable and fruit consumption. The results show that using educational media with processed noodles can increase the acceptance of fruit and vegetable consumption in school-age children. The composition of nutrients in each processed vegetable and fruit noodle is quite complete and balanced.

Changes in Phytochemical Profiles and Biological Activity of Olive Leaves Treated by Two Drying Methods

Olive leaves, which are the most abundant byproducts of the olive industry, offer multiple health benefits. The investigation of the phytochemical profiles and relevant biological activities is an essential step toward transforming these low-value byproducts into value-added ones. This study systematically investigated the phytochemical profiles, antioxidant capacity, and inhibition rates of olive leaves from four cultivars on the α-glucosidase, α-amylase, and angiotensin-converting enzyme (ACE). The leaves were prepared using two common drying methods, namely, hot air-drying and freeze-drying. A total of 33 bioactive compounds were identified in the olive leaves, namely, 19 flavonoids, 2 phenylethanoids, 2 coumarins, 2 hydroxycinnamic acids, 2 iridoids, and 6 triterpenic acids. Quantification of the bioactive compounds revealed high amounts of polyphenols, especially flavonoids [2,027–8,055 mg/kg dry weight (DW)], iridoids (566–22,096 mg/kg DW), and triterpenic acids (13,824–19,056 mg/kg DW) in the olive leaves. The hot air-dried leaves showed significantly (P < 0.05) higher iridoid (oleuropein and secoxyloganin) content than the fresh leaves, while freeze-drying resulted in significantly (P < 0.05) higher flavonoid aglycone and hydroxytyrosol content. Additionally, freeze-drying led to samples with the highest radical scavenging, α-amylase, α-glucosidase, and ACE inhibition abilities. The flavonoid (e.g., quercetin, luteolin, eriodictyol, kaempferol-7-O-glucoside, and luteolin-7-O-glucoside), hydroxytyrosol, and oleanolic acid contents in the olive leaves were positively correlated (P < 0.05) with their bioactive potentials.

Bioactive and Physicochemical Properties of Exotic Fruit Seed Powders: Mango (Mangefiera indica L.) and Rambutan (Nephelium lappaceum L.) Obtained by Various Drying Methods

Exotic fruits, which are becoming more and more popular in European countries, contain seeds, which are an unused and useless byproduct of fruit processing. Research conducted in recent years suggests that these unused waste products can be a source of nutrients and bioactive compounds in much more concentrated amounts than those found in the flesh of the fruit. Research on the physicochemical properties and the content of bioactive compounds in fruit seeds may allow the assessment of the possibility and purposefulness of their wider application in the production of functional food. Therefore, the aim of this study was to determine the physicochemical and bioactive properties of exotic, tropical fruit seed powders, such as mango (Mangefiera indica L.) and rambutan (Nephelium lappaceum L.) seeds, obtained by convective drying (CD) and sublimation drying (FD). In the tested powders, the water-holding capacity and water solubility were determined, the color was measured using the ‘electronic eye’ instrumental method, the taste profile was determined using the ‘electronic tongue’, and the content of selected bioactive compounds—such as tannins (titration method), total polyphenols and antioxidant activity was also determined using the spectrophotometric method. It was found that the studied powders were characterized by low water-holding capacity (1.2–1.6 g/1 g of powder), low solubility in water (9.5–17.4%), neutral color and varied taste profile, depending on the origin of the tested powder. Rambutan seed powders were characterized by a more bitter taste with a higher umami-flavor intensity compared to mango seed powders, which showed a more intense acidic and sweet taste. The conducted research shows that the applied methods of powder production, i.e., drying (to similar aw values) by convection vs. sublimation, had a much greater impact on changes in the content of bioactive compounds than on the tested physicochemical parameters. The freeze-dried seed powders were characterized by a higher content of polyphenolic compounds and a higher antioxidant activity than convection-dried seed powders. Considering the high content of polyphenols and high antioxidant activity, the studied powders may find applications in the production of dietary supplements and in the design of functional foods. Due to the low water solubility index, mango and rambutan powders can be used in the design of products where particle sensitivity is indicated. The use of the investigated exotic fruit seed powders, i.e., mango and rambutan, may not only be beneficial for nutritional reasons, but also may contribute to the reduction of post-production waste, in line with the recently widespread “zero waste” trend.

Drying of Food Waste for Potential Use as Animal Feed

A considerable part of food is wasted, causing investment capital loss as well as environmental pollution and health problems in humans. Indirect solar drying was applied to test the potential of drying and reusing this waste as a component of animal feed. The effect of weather changes on drying kinetics and the effective diffusion coefficient, dried feed nutritional composition, and microbiological analysis of the dried product were investigated. A convective laboratory dryer was used as a reference method. Weather conditions have a crucial effect on the use of solar drying; one sunny day with appropriate conditions can reduce the water activity of food waste to below 0.3 and moisture content to below 6%. Much better fitting of experimental and model drying curves was achieved considering sample shrinkage, applying a more complex solution of Fick’s second law combined with an optimization procedure. The studied food waste had a good combination of nutrients, such as protein, fat, and carbohydrates; however, the amount of protein in the dried food waste was found to be lower than that in regular feed, and therefore, adding a protein source is recommended. Autoclaving of fresh samples reduced the total microbial counts of dried samples by more than 50%.