Vertically aligned Ag nanoplate-assembled film as a sensitive and reproducible SERS substrate for the detection of PCB-77

Equilibria of semi-volatile isothiazolinones between air and glass surfaces measured by gas chromatography and Raman spectroscopy

Trace amounts of semi-volatile organic compounds (SVOCs) of the two isothiazolinones of 2-methylisothiazol-3(2H)-one (MIT) and 2-octyl-4-isothiazolin-3-one (OIT) were detected both in the air and on glass surfaces. Equilibria of SVOCs between air and glass were examined by solid phase microextraction-gas chromatography/mass spectrometry (SPME-GC/MS). Surface to air distribution ratios of K_sa for MIT and OIT were determined to be 5.10 m and 281.74 m, respectively, suggesting more abundant MIT in the gas phase by a factor of ∼55. In addition, a facile method of silver nanocube (AgNC)-assisted surface-enhanced Raman scattering (SERS) has been developed for the rapid and sensitive detection of MIT and OIT on glass surfaces. According to MIT and OIT concentration-correlated SERS intensities of Raman peaks at ∼1585 cm^-1 and ∼1125 cm^-1, respectively. Their calibration curves have been obtained in the concentration ranges between 10^-3 to 10^-10 M and 10^-3 to 10^-11 M with their linearity of 0.9986 and 0.9989 for MIT and OIT, respectively. The limits of detection (LODs) of the two isothiazolinones were estimated at 10^-10 M, and 10^-11 M for MIT and OIT, respectively. Our results indicate that AgNC-assisted SERS spectra are a rapid and high-ultrasensitive method for the quantification of MIT and OIT in practical applications. The development of analytical methods and determination of the Ksa value obtained in this study can be applied to the prediction of the exposure to MIT and OIT from various chemical products and dynamic behaviors to assess human health risks in indoor environments.

Simultaneous Multiplexed Quantification of Banned Sudan Dyes Using Surface Enhanced Raman Scattering and Chemometrics

Azo compounds such as the Sudan dyes I-IV are frequently used illegally as colorants and added to a wide range of foods. These compounds have been linked to a number of food safety hazards. Several methods have been proposed to detect food contamination by azo compounds and most of these are laboratory based; however, the development of reliable and portable methods for the detection and quantification of food contaminated by these chemicals in low concentration is still needed due to their potentially carcinogenic properties. In this study, we investigated the ability of surface enhanced Raman scattering (SERS) combined with chemometrics to quantify Sudan I-IV dyes. SERS spectra were acquired using a portable Raman device and gold nanoparticles were employed as the SERS substrate. As these dyes are hydrophobic, they were first dissolved in water: acetonitrile (1:10, v/v) as single Sudan dyes (I-IV) at varying concentrations. SERS was performed at 785 nm and the spectra were analyzed by using partial least squares regression (PLS-R) with double cross-validations. The coefficient of determination (Q²) were 0.9286, 0.9206, 0.8676 and 0.9705 for Sudan I to IV, respectively; the corresponding limits of detection (LOD) for these dyes were estimated to be 6.27 × 10^-6, 5.35 × 10^-5, 9.40 × 10^-6 and 1.84 × 10^-6 M. Next, quadruplex mixtures were made containing all four Sudan dyes. As the number of possible combinations needed to cover the full concentration range at 5% intervals would have meant collecting SERS spectra from 194,481 samples (21⁴ combinations) we used a sustainable solution based on Latin hypercubic sampling and reduced the number of mixtures to be analyzed to just 90. After collecting SERS spectra from these mixture PLS-R models with bootstrapping validations were employed. The results were slightly worse in which the Q² for Sudan I to IV were 0.8593, 0.7255, 0.5207 and 0.5940 when PLS1 models (i.e., one model for one dye) was employed and they changed to 0.8329, 0.7288, 0.5032 and 0.5459 when PLS2 models were employed (i.e., four dyes were modelled simultaneously). These results showed the potential of SERS to be used as a high-throughput, low-cost, and reliable methods for detecting and quantifying multiple Sudan dyes in low concentration from illegally adulterated samples.

Esterified-sawdust decorated with AgNPs as solid-phase extraction membranes for enrichment and high-sensitivity detection of polychlorinated biphenyls

Polychlorinated biphenyls (PCBs) are a class of persistent organic pollutants, which cause serious harm to human health and ecological environment. Thus, a low-cost membrane was developed for highly effective removal and rapid surface-enhanced Raman scattering (SERS) detection of PCBs by filling esterified-sawdust (CA-SD) modified with silver nanoparticles (AgNPs) into solid phase extraction (SPE) column. SD was first modified by an esterification cross-linking strategy and then AgNPs were anchored on the CA-SD to prepare highly sensitive and reproducible SERS substrates (AgNPs/CA-SD). Due to the contraction of the surface area of the CA-SD caused by drying, the gap between the AgNPs could be reduced, thereby generating a large number of hot spots and driving more target molecules into them to obtain the enhanced SERS signals. The AgNPs/CA-SD-based SPE membrane showed excellent SERS activity with an enhancement factor of 5.98 × 10⁸ for the R6G analysis. The proposed SERS-active SPE membrane with functionalization of mercapto-β-cyclodextrin was further developed for the determination of PCB-77 and PCB-1 with the LODs of 1.43 × 10^-9 M and 2.12 × 10^-8 M, respectively. In addition, each PCB in the mixed sample could be quickly distinguished based on the characteristic peaks. The current research exhibits great potential for the simultaneous detection of multiple environmental contaminants and can meet the needs of on-site emergency detection.

Hydrothermal Synthesis of Ag Thin Films and Their SERS Application

In this article, a facile, one-step method for the formation of silver thin-film nanostructures on the surface of Al₂O₃ substrates using the hydrothermal method is proposed. The dependence of the SERS effect intensity of the formed films during the detection of methylene blue (MB) low concentrations on the synthesis conditions, additional temperature treatment, and laser radiation wavelength (532 and 780 nm) in comparison with similar dye films on commercial SERS substrates is shown. The detection limit of the analyte used for the indicated lasers is estimated. The effect of the synthesis temperature on the particle size, crystal structure, and microstructure features of the obtained thin films based on silver nanoparticles is demonstrated. Using spreading resistance microscopy, the interface between the substrate and Ag particles is studied, and the dependence of the size of the corresponding gap between them and the nature of microstructural defects on the parameters of hydrothermal treatment of reaction systems in the presence of Al₂O₃ substrates is shown. As a result of the study, the factors associated with the properties of the obtained SERS substrates and the parameters of recording the spectra, which affect the amplification factor of the spectral lines intensity of the analyte, are revealed.

Surface-Enhanced Raman Sensing of Semi-Volatile Organic Compounds by Plasmonic Nanostructures

Facile detection of indoor semi-volatile organic compounds (SVOCs) is a critical issue to raise an increasing concern to current researchers, since their emissions have impacted the health of humans, who spend much of their time indoors after the recent incessant COVID-19 pandemic outbreaks. Plasmonic nanomaterial platforms can utilize an electromagnetic field to induce significant Raman signal enhancements of vibrational spectra of pollutant molecules from localized hotspots. Surface-enhanced Raman scattering (SERS) sensing based on functional plasmonic nanostructures has currently emerged as a powerful analytical technique, which is widely adopted for the ultra-sensitive detection of SVOC molecules, including phthalates and polycyclic aromatic hydrocarbons (PAHs) from household chemicals in indoor environments. This concise topical review gives updated recent developments and trends in optical sensors of surface plasmon resonance (SPR) and SERS for effective sensing of SVOCs by functionalization of noble metal nanostructures. Specific features of plasmonic nanomaterials utilized in sensors are evaluated comparatively, including their various sizes and shapes. Novel aptasensors-assisted SERS technology and its potential application are also introduced for selective sensing. The current challenges and perspectives on SERS-based optical sensors using plasmonic nanomaterial platforms and aptasensors are discussed for applying indoor SVOC detection.

Development of shipboard automatic flow injection analysis-Surface-enhanced Raman spectroscopy instrument toward onsite detection of trace polycyclic aromatic hydrocarbons in water environment

The qualitative and quantitative analysis of polycyclic aromatic hydrocarbons (PAHs) has been important for the environmental control of persistent organic pollutants for decades. Considering the potential risk of deterioration, degradation, and external pollution during transportation, the development of rapid and onsite detection of trace PAHs is in demand. Here, taking the advantage of high sensitivity of surface-enhanced Raman spectroscopy (SERS), we developed a shipboard instrument by combining a portable Raman instrument and a flow injection device, integrating the sample pretreatment and target detection step by step. The feasibility of the instrument was demonstrated by detecting trace benzo[a]pyrene from different water environments with the lowest detection concentration less than 1 µg/l. The reliable stability and repeatability indicate that in the case of emergency response, the developed flow injection analysis-SERS instrument is very promising for the quantitative and qualitative analysis of diverse organic pollutants other than PAHs in water environments.

General Surface-Enhanced Raman Spectroscopy Method for Actively Capturing Target Molecules in Small Gaps

Over the past decade, many efforts have been devoted to designing and fabricating substrates for surface-enhanced Raman spectroscopy (SERS) with abundant hot spots to improve the sensitivity of detection. However, there have been many difficulties involved in causing molecules to enter hot spots actively or effectively. Here, we report a general SERS method for actively capturing target molecules in small gaps (hot spots) by constructing a nanocapillary pumping model. The ubiquity of hot spots and the inevitability of molecules entering them lights up all the hot spots and makes them effective. This general method can realize the highly sensitive detection of different types of molecules, including organic pollutants, drugs, poisons, toxins, pesticide residues, dyes, antibiotics, amino acids, antitumor drugs, explosives, and plasticizers. Additionally, in the dynamic detection process, an efficient and stable signal can be maintained for 1-2 min, which increases the practicality and operability of this method. Moreover, a dynamic detection process like this corresponds to the processes of material transformation in some organisms, so the method can be used to monitor transformation processes such as the death of a single cell caused by photothermal stimulation. Our method provides a novel pathway for generating hot spots that actively attract target molecules, and it can achieve general ultratrace detection of diverse substances and be applied to the study of cell behaviors in biological systems.

Development of affinity between target analytes and substrates in surface enhanced Raman spectroscopy for environmental pollutant detection

Environmental pollution has long been a social concern due to the variety of pollutants and their wide distribution, persistence and being detrimental to health. It is therefore necessary to develop rapid and sensitive strategies to trace and detect these compounds. Among various detection methodologies, surface enhanced Raman spectroscopy (SERS) has become an attractive option as it enables accurate analyte identification, simple sample preparation, rapid detection and ultra-high sensitivity without any interference from water. For SERS detection, an essential yet challenging step is the effective capture of target analytes onto the surface of metal nanostructures with a high intensity of enhanced electromagnetic field. This review has systematically summarized recent advances in developing affinity between targets and the surface of SERS substrates via direct adsorption, hydrophobic functional groups, boronate affinity, metal organic frameworks (MOFs), DNA aptamers and molecularly imprinted polymers (MIPs). At the end of this review, technical limitations and outlook have been provided, with suggestions on optimizing SERS techniques for real-world applications in environmental pollutant detection.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Two-dimensional MXene modified AgNRs as a surface-enhanced Raman scattering substrate for sensitive determination of polychlorinated biphenyls

A MXene/AgNR substrate was prepared through a facile modification strategy. The substrate can perform sensitive SERS detection of polychlorinated biphenyls, which may have potential in environmental monitoring at the point of need.

Label-free and highly selective electrochemical aptasensor for detection of PCBs based on nickel hexacyanoferrate nanoparticles/reduced graphene oxides hybrids

In consideration of the urgent need to determine polychlorinated biphenyls (PCBs) in the environment, a label-free and highly selective electrochemical aptasensor was constructed for determining PCBs based on nickel hexacyanoferrate nanoparticles (NiHCF NPs)/reduced graphene oxides (rGO) hybrids. NiHCF NPs/rGO hybrids with small size of about 5 nm NiHCF NPs were synthesized for the first time by in situ co-deposition of NiHCF NPs on rGO surface. In the hybrids, rGO with large area and good conductivity can supply more space for loading NiHCF NPs and improve the conductivity of the hybrids. NiHCF NPs that can be used to be act as a signal probe exhibit a couple of well-defined peaks with highly reversible redox ability and good stability. Here, PCB77 as a model molecule, the anti-PCB77 aptamer was anchored on the NiHCF NPs/rGO hybrids by covalent bonding reaction. The design aptasensor for detecting PCB77 exhibits a favorable linear response from 1.0 to 100.0 ng/L with a low detection limit of 0.22 ng/L. Meanwhile, it displays good selectivity for PCB77 detection due to the specificity and high affinity of aptamer to PCB77. Additionally, the application of the aptasensor was evaluated in real environmental samples.

Dioxin and Related Compound Detection: Perspectives for Optical Monitoring

Dioxins and related compounds are environmental xenobiotics that are dangerous to human life, due to the accumulation and persistence in the environment and in the food chain. Cancer, reproductive and developmental issues, and damage to the immune system and endocrine system are only a few examples of the impact of such substances in everyday life. For these reasons, it is fundamental to detect and monitor these molecules in biological samples. The consolidated technique for analytical evaluation is gas chromatography combined with high-resolution mass spectrometry. Nowadays, the development of mid-infrared optical components like broadband laser sources, optical frequency combs, high performance Fourier-transform infrared spectroscopy, and plasmonic sensors open the way to new techniques for detection and real time monitoring of these organic pollutants in gaseous or liquid phase, with sufficient sensitivity and selectivity, and in short time periods. In this review, we report the latest techniques for the detection of dioxins, furans and related compounds based on optical and spectroscopic methods, looking at future perspectives.

Circumventing silver oxidation induced performance degradation of silver surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) has been recognized as a promising sensing technique in biomedical/biosensing applications and analytical chemistry. Silver (Ag) nanostructures have the strongest SERS enhancement, but suffer from severe enhancement degradation induced by oxidation. Here, we introduce electrochemical reduction of silver oxide to produce Ag SERS substrates on request to partially circumvent the SERS enhancement degradation problem of Ag SERS substrates. Silver oxide nanostructures were first prepared in pure silver citrate aqueous solutions with controllable morphologies depending on the electrodeposition parameters. The transition process from silver oxide to Ag was investigated by density functional theory calculations. Based on the understanding of the transition mechanism, heating treatment, applying reducing agent, and electrochemical reduction were adopted to transform silver oxide to Ag. Notably, no organic agents were introduced neither in the electrodeposition of silver oxide nor electrochemical transformation of silver oxide to Ag. The electrochemical reduction strategy could produce Ag SERS substrates with a 'clean' surface with outstanding SERS performance in a simple as well as cost and time effective manner. Ag SERS substrates can be used in biomedical/biosensing fields. The approach through electrochemical reduction of silver oxide to generate Ag SERS substrate may push forward practical application process of Ag SERS substrates.

Synthesis of uniform Ag nanosponges and its SERS application

With the aid of amino acid, various Ag nanostructures were successfully synthesized via the reaction between silver nitrate and hydrazine hydrate at room temperature. The as-prepared products were characterized by X-ray diffraction and scanning electron microscopy. It was found that the morphology of the as-prepared Ag products depended on the sorts of amino acid and solvents. The uniform Ag nanosponges could be obtained in glycol with aid of glycine. Using rhodamine 6G (R6G) as probe, the surface-enhanced Raman scattering (SERS) performance was also investigated, which showed that the uniform Ag nanosponges exhibited an intensive and enhanced Raman scattering. Pazufloxacin mesilate (PM) were detected conveniently using these uniform nanosponges as SERS substrates. The present work might afford some guidance for the rationally controllable synthesis of other metal nanomaterials.

Facing Challenges in Real-Life Application of Surface-Enhanced Raman Scattering: Design and Nanofabrication of Surface-Enhanced Raman Scattering Substrates for Rapid Field Test of Food Contaminants

Surface-enhanced Raman scattering (SERS) is capable of detecting a single molecule with high specificity and has become a promising technique for rapid chemical analysis of agricultural products and foods. With a deeper understanding of the SERS effect and advances in nanofabrication technology, SERS is now on the edge of going out of the laboratory and becoming a sophisticated analytical tool to fulfill various real-world tasks. This review focuses on the challenges that SERS has met in this progress, such as how to obtain a reliable SERS signal, improve the sensitivity and specificity in a complex sample matrix, develop simple and user-friendly practical sensing approach, reduce the running cost, etc. This review highlights the new thoughts on design and nanofabrication of SERS-active substrates for solving these challenges and introduces the recent advances of SERS applications in this area. We hope that our discussion will encourage more researches to address these challenges and eventually help to bring SERS technology out of the laboratory.

Raman scattering enhanced within the plasmonic gap between an isolated Ag triangular nanoplate and Ag film

Enhanced electromagnetic field in the tiny gaps between metallic nanostructures holds great promise in optical applications. Herein, we report novel out-of-plane nanogaps composed of micrometer-sized Ag triangular nanoplates (AgTN) on Ag films. Notably, the new coupled plasmonic structure can dramatically enhance the surface-enhanced Raman scattering (SERS) by visible laser excitation, although the micrometer-sized AgTN has localized plasmon resonance at infrared wavelength. This enhancement is derived from the gap plasmon polariton between the AgTN and Ag film, which is excited via the antenna effect of the corner and edge of the AgTN. Systematic SERS studies indicated that the plasmon enhancement was on the order of corner > edge > face. These results were further verified by theoretical simulations. Our device paves the way for rational design of sensitive SERS substrates by judiciously choosing appropriate nanoparticles and optimizing the gap distance.

Detection of dimethyl methylphosphonate by thin water film confined surface-enhanced Raman scattering method

It is important and necessary to effectively detect the chemical warfare agents, such as highly toxic never agent sarin. However, based on the surface-enhanced Raman scattering (SERS) effect, detection of nerve agent simulant dimethyl methylphosphonate (DMMP) which is weakly interacted with SERS-active substrate has been the most challenge for the routine SERS detection method. To overcome this challenge, we put forward a thin water film confined SERS strategy. Under the space-confinement of water film, Raman measurements are carried out in the water evaporation process. The subsequent water evaporation induces concentrating of the DMMP molecules, which are thus successfully restricted within the strong electromagnetic field enhanced area above the SERS substrates, leading to the enhancement of their Raman signals. This study provides a new way to achieve the efficient SERS-based detection of the target molecules weakly interacted with the metal substrates.

An overview of detection techniques for monitoring dioxin-like compounds: latest technique trends and their applications

Dioxin-like compounds (DLCs) are considered as persistent bioaccumulative toxicants with a number of continuing issues in the fields of ecotoxicology and bioassay.

Sensitivity and Reusability of SiO2 NRs@ Au NPs SERS Substrate in Trace Monochlorobiphenyl Detection

Surface-enhanced Raman scattering (SERS) effect is quite preferred to detect trace pollutants, and reusable SERS substrate is of important practical value. In this research, a kind of effective SiO2 nanorods (NRs)@ Au nanoparticles (NPs) substrate was fabricated completely with physical methods, and it was quite sensitive so that 1 × 10(-6) M monochlorobiphenyl (CB) could be detected. Furthermore, congeners of CB could be detected by reusing this kind of SERS substrate, and the cleaning treatment between every two detections was very simple. The excellent performance of the reusable SERS substrate indicated its great application potential.

A SERS study of oxidation of glutathione under plasma irradiation

This paper reports a new application of surface enhanced Raman scattering (SERS) in analysis of oxidation of glutathione to oxidized glutathione, an important biochemical redox reaction in biological systems.

β-Cyclodextrin coated SiO2@Au@Ag core–shell nanoparticles for SERS detection of PCBs

A new type of surface-enhanced Raman scattering (SERS) substrate consisting of β-cyclodextrin (β-CD) coated SiO₂@Au@Ag nanoparticles (SiO₂@Au@Ag@CD NPs) has been achieved.

Selective synthesis of different ZnO/Ag nanocomposites as surface enhanced Raman scattering substrates and highly efficient photocatalytic catalysts

Different ZnO–Ag nanocomposites with controlling SERS and photocatalytic performance were obtained only by adjusting solvents.

Hydrophobic gold nanostructures via electrochemical deposition for sensitive SERS detection of persistent toxic substances

The hydrophobic gold nanostructures were used for direct SERS detection of PTS with high sensitivity.

Synthesis of surface-imprinted Ag nanoplates for detecting organic pollutants in water environments based on surface enhanced Raman scattering

Ag-molecularly imprinted polymer (MIP) hybrid composites (Ag@MIPs) were prepared for the ultra-sensitive detection of organic pollutants in water based on surface enhanced Raman scattering (SERS).

A facile and green method for synthesis of reduced graphene oxide/Ag hybrids as efficient surface enhanced Raman scattering platforms

Reduced graphene oxide/Ag nanoparticles hybrids (rGO/AgNPs) were fabricated via a green and facile hydrothermal method. The as-synthesized materials were characterized in detail using various spectroscopic and microscopic techniques. Under a suitable dosage of silver ions, well-dispersed AgNPs on the reduced graphene oxide sheets were obtained. The surface plasmon resonance properties of AgNPs on graphene show that there is an interaction between AgNPs and graphene. Trace detection of organic dyes is studied based on rGO/AgNPs hybrids as efficient surface enhanced Raman scattering platforms. It has been found that the suitable experiment parameter is crucial to trace detection of organic dyes molecules. This work is of importance in the practical application in device-design based on the SERS effect of noble metal/reduced oxide graphene (or oxide graphene) hybrids.

Quantitative SERS detection of low-concentration aromatic polychlorinated biphenyl-77 and 2,4,6-trinitrotoluene

This paper reports a simple label-free high-sensitive method for detecting low-concentration persistent organic pollutants and explosive materials. The proposed method combines surface-enhanced Raman spectroscopy (SERS) and magnetomotive enrichment of the target molecules on the surface of Ag nanoparticles (NPs). This structure can be achieved through self-assembling integration of Ag NPs with ferromagnetic Fe3O4 microspheres, forming a hybrid SERS nanoprobe with both optical and magnetic properties. Moreover, the magnetic response of ferromagnetic Fe3O4 microspheres can be used to dynamically modulate the optical property of Ag NPs through controlling their geometric arrangement on the substrate by applying an external magnetic field. It is also demonstrated from the full-wave numerical simulation results that the maximum electromagnetic field enhancement can be greatly increased by shortening the distance of neighboring Ag NPs and therefore resulting in an improved SERS detecting limit. More importantly, by using the prepared substrate, the SERS signals from organic pollution substances, i.e. aromatic polychlorinated biphenyl-77 and 2,4,6-trinitrotoluene, were quantitatively analyzed.

Flexible membranes of Ag-nanosheet-grafted polyamide-nanofibers as effective 3D SERS substrates

We report on a synthetic approach to produce self-supported flexible surface-enhanced Raman scattering (SERS) active membranes consisting of polyamide (PA) nanofibers grafted with vertical Ag-nanosheets, via a combinatorial process of electrospinning PA-nanofiber membranes, assembling Au-nanoparticles on the PA-nanofibers as seeds for subsequent growth of Ag-nanosheets, and electrodepositing Ag-nanosheets on the electrospun PA-nanofibers. As a high density of Ag-nanosheets are vertically grown around each PA-nanofiber in the three-dimensional (3D) networked PA-nanofiber membranes, homogeneous nano-scaled gaps between the neighboring Ag-nanosheets are formed, leading to a high density of 3D SERS "hot spots" within the Ag-nanosheet-grafted PA-nanofiber membranes. The Ag-nanosheet-grafted PA-nanofiber membranes demonstrate high SERS activity with excellent Raman signal reproducibility for rhodamine 6G over the whole membrane. For a SERS-based trial analysis of polychlorinated biphenyls (PCBs, a kind of global environmental hazard), the 3D SERS substrate membranes are modified with mono-6-β-cychlodextrin to effectively capture PCB molecules. As a result, not only a low concentration down to 10(-6) M is reached, but also two congeners of PCBs in their mixed solution are identified, showing promising potential in SERS-based rapid detection of trace organic pollutants such as PCBs in the environment.

Ordered arrays of Au-nanobowls loaded with Ag-nanoparticles as effective SERS substrates for rapid detection of PCBs

Large-scale hexagonally close-packed arrays of Au-nanobowls (Au-NBs) with tens of Ag-nanoparticles (Ag-NPs) dispersed in each bowl (denoted as Ag-NPs@Au-NB arrays) are achieved and utilized as effective surface-enhanced Raman scattering (SERS) substrates. The field enhancement benefiting from the special particle-in-cavity geometrical structure as well as the high density of SERS hot spots located in the sub-10 nm gaps between adjacent Ag-NPs and at the particle-cavity junctions all together contribute to the high SERS activity of the Ag-NPs@Au-NB arrays; meanwhile the ordered morphological features of the Ag-NPs@Au-NB arrays guarantee uniformity and reproducibility of the SERS signals. By modifying the Ag-NPs@Au-NB arrays with mono-6-thio-β-cyclodextrin, the SERS detection sensitivity to 3,3('),4,4(')-tetrachlorobiphenyl (PCB-77, one congener of polychlorinated biphenyls (PCBs, kinds of persistent organic pollutants which represent a global environmental hazard)) can be further improved and a low concentration down to 5 × 10(-7) M can still be examined, showing promising potential for application in rapid detection of trace-level PCBs in the environment.

Detection of the mycotoxin citrinin using silver substrates and Raman spectroscopy

We detected a trace amount of the mycotoxin citrinin using surface-enhanced Raman scattering (SERS) on silver nanoparticle (Ag NP) surfaces. The SERS substrate on hydrophobic Teflon films was also introduced to observe the citrinin peaks. A broad band at ∼1382cm(-1), which was ascribed to the symmetric carboxylate stretching mode, was observed in addition to an antisymmetric carboxylate stretching mode at ∼1568cm(-1) in the Raman spectra. The spectral feature indicated that citrinin would adsorb on Ag NPs via its carboxylate form. Based on density functional theory (DFT) calculations, vibrational mode analysis was performed to compare the Raman spectra of citrinin. DFT calculations also predicted that a bidentate bridge configuration through O15 and O16 atoms in citrinin would be the most stable on three Ag atoms. After treating with Ag NPs, observation of citrinin peaks was attempted in fungal cells of Penicillium citrinum. This work may provide useful insights into the direct observation of the hazardous citrinin mycotoxin using SERS by understanding its adsorption behaviors on Ag surfaces.

A disordered silver nanowires membrane for extraction and surface-enhanced Raman spectroscopy detection

A disordered silver nanowires membrane combining solid-phase extraction with surface-enhanced Raman spectroscopy was used for the rapid collection and detection of food contaminants.

SERS-Active Ag Decorated Polymer Nanorod Substrate Fabricated by the Combination of Photochemical Reduction and Nanoimprint Technology

We demonstrated a cost-effective and simple method of fabricating Ag-decorated polymer nanorod (ADPN) array by the combination of fabricated by the combination of photochemical reduction and nanoimprint technology. Here, nanoimprint lithography is utilized to fabricate polymer nanorod array as the periodic temple. Subsequently, ADPNs array can be achieved via UV irradiating. The as-synthesized ADPNs array exhibited a remarkable SERS activity and Raman signal reproducibility to rhodamine 6G, a concentration down to 1011 M can be identified. Our results revealed that the ADPN array is a highly desirable candidate as the reliable enhancer for high performance SERS analysis.

Controlled synthesis of homogeneous Ag nanosheet-assembled film for effective SERS substrate

Homogeneous Ag nanosheet-assembled film was successfully fabricated by using Cu plate through a simple modified solution method, where weak reductive Cu2O layer and complexing agent citrate ions were both introduced into the reaction system to control the reaction process. Meanwhile, citrate ions were used as morphology-controlled reagent to lead Ag units to grow in the form of nanosheet. The growth process exhibited that Ag nanosheet-assembled film formed slowly with reaction proceeding. Additionally, the pack density of nanosheets in the final product was found to be adjusted by the concentrations of Ag(+) ions in precursor solution. Using Rhodamine 6G (R6G) as probing molecules, the surface-enhanced Raman scattering (SERS) experiments showed that the Ag film assembled by nanosheets with high pack density exhibited excellent detecting performance, which could be used as effective SERS substrate for ultrasensitive detecting. Besides, a novel quintuplet SERS substrate could be synthesized in one batch by our method, which showed good reproducibility and a linear dependence between analyte concentrations and intensities, revealing the advantage of this method for easily scale-up production.

Figures of merit of a SERS method for Sudan I determination at traces levels

A substrate for Surface-Enhanced Raman Scattering spectroscopy (SERS), electropolished Al, is proposed as a tool for a rapid and low cost determination of Sudan I. This dye has been used as an additive in some foodstuffs but it is now banned because of the health risk associated with its carcinogenic and mutagenic properties. Despite the presence of fluorescence, Raman spectra of Sudan I can be obtained using excitation lasers at 633 and 785 nm. To get rid of the spectral noise and fluorescence background, Savitzky-Golay smoothing and polynomial corrections were applied, respectively. The Raman signal was proved to be enhanced. A linear dependence was found between the logarithmic intensity at 1598 cm(-1) peak versus the logarithmic concentration. The figures of merit were studied obtaining high sensitivity and low detection limits (10(-7) M). A multivariate exploratory analysis (PCA) was used to study the ability of SERS to distinguish Sudan I from other similar compounds. Therefore, results show that SERS is a potential tool to determine Sudan I quickly and effectively.

Galvanic-cell-induced growth of Ag nanosheet-assembled structures as sensitive and reproducible SERS substrates

SERS up: Ag nanosheet-assembled structures with controlled morphologies were achieved on indium tin oxide substrates by galvanic-cell-induced growth (see figure). These structures exhibit a highly active and homogeneous surface-enhanced Raman scattering (SERS) effect, and show promising potential as reliable SERS substrates for detection of trace polychlorinated biphenyls.

Large-scale homogeneously distributed Ag-NPs with sub-10 nm gaps assembled on a two-layered honeycomb-like TiO2 film as sensitive and reproducible SERS substrates

We present a surface-enhanced Raman scattering (SERS) substrate featured by large-scale homogeneously distributed Ag nanoparticles (Ag-NPs) with sub-10 nm gaps assembled on a two-layered honeycomb-like TiO(2) film. The two-layered honeycomb-like TiO(2) film was achieved by a two-step anodization of pure Ti foil, with its upper layer consisting of hexagonally arranged shallow nano-bowls of 160 nm in diameter, and the lower layer consisting of arrays of about fifty vertically aligned sub-20 nm diameter nanopores. The shallow nano-bowls in the upper layer divide the whole TiO(2) film into regularly arranged arrays of uniform hexagonal nano-cells, leading to a similar distribution pattern for the ion-sputtered Ag-NPs in each nano-cell. The lower layer with sub-20 nm diameter nanopores prevents the aggregation of the sputtered Ag-NPs, so that the Ag-NPs can get much closer with gaps in the sub-10 nm range. Therefore, large-scale high-density and quasi-ordered sub-10 nm gaps between the adjacent Ag-NPs were achieved, which ensures homogeneously distributed 'hot spots' over a large area for the SERS effect. Moreover, the honeycomb-like structure can also facilitate the capture of target analyte molecules. As expected, the SERS substrate exhibits an excellent SERS effect with high sensitivity and reproducibility. As an example, the SERS substrate was utilized to detect polychlorinated biphenyls (PCBs, a kind of persistent organic pollutants as global environmental hazard) such as 3,3',4,4'-pentachlorobiphenyl (PCB-77) with concentrations down to 10(-9) M. Therefore the large-scale Ag-NPs with sub-10 nm gaps assembled on the two-layered honeycomb-like TiO (2) film have potentials in SERS-based rapid trace detection of PCBs.

The need and potential of biosensors to detect dioxins and dioxin-like polychlorinated biphenyls along the milk, eggs and meat food chain

Dioxins and dioxin-like polychlorinated biphenyls (DL-PCBs) are hazardous toxic, ubiquitous and persistent chemical compounds, which can enter the food chain and accumulate up to higher trophic levels. Their determination requires sophisticated methods, expensive facilities and instruments, well-trained personnel and expensive chemical reagents. Ideally, real-time monitoring using rapid detection methods should be applied to detect possible contamination along the food chain in order to prevent human exposure. Sensor technology may be promising in this respect. This review gives the state of the art for detecting possible contamination with dioxins and DL-PCBs along the food chain of animal-source foods. The main detection methods applied (i.e., high resolution gas-chromatography combined with high resolution mass-spectrometry (HRGC/HRMS) and the chemical activated luciferase gene expression method (CALUX bioassay)), each have their limitations. Biosensors for detecting dioxins and related compounds, although still under development, show potential to overcome these limitations. Immunosensors and biomimetic-based biosensors potentially offer increased selectivity and sensitivity for dioxin and DL-PCB detection, while whole cell-based biosensors present interpretable biological results. The main shortcoming of current biosensors, however, is their detection level: this may be insufficient as limits for dioxins and DL-PCBs for food and feedstuffs are in pg per gram level. In addition, these contaminants are normally present in fat, a difficult matrix for biosensor detection. Therefore, simple and efficient extraction and clean-up procedures are required which may enable biosensors to detect dioxins and DL-PCBs contamination along the food chain.