The effect of salinity, redox mediators and temperature on anaerobic biodegradation of petroleum hydrocarbons in microbial fuel cells

Enhancing bioremediation potential of microalgae Chlorella vulgaris and Scenedesmus acutus by NaCl for pyrene degradation

Microalgae are increasingly recognized as promising organisms for bioremediation of organic pollutants. This study investigates the potential of enhancing the bioremediation efficiency of pyrene (PYR), a polycyclic aromatic hydrocarbon (PAH), through NaCl induced physiological and biochemical alterations in two microalgae species, Chlorella vulgaris and Scenedesmus acutus. Our findings reveal significant improvement in PYR removal when these microalgae were cultivated in the presence of 0.1% NaCl where PYR removal increased from 54 to 74% for C. vulgaris and from 26 to 75% for S. acutus. However, it was observed that NaCl induced stress had varying effects on the two species. While C. vulgaris exhibited increased PYR removal, it experienced reduced growth and biomass production, as well as lower photosynthetic efficiency when exposed to PYR and PYR + NaCl. In contrast, S. acutus displayed better growth and biomass accumulation under PYR + NaCl conditions, making it a more efficient candidate for enhancing PYR bioremediation in the presence of NaCl. In addition to assessing growth and biochemical content, we also investigated stress biomarkers, such as lipid peroxidation, polyphenol and proline contents. These findings suggest that S. acutus holds promise as an alternative microalgae species for PYR removal in the presence of NaCl, offering potential advantages in terms of bioremediation efficiency and ecological sustainability. This study highlights the importance of understanding the physiological and biochemical responses of microalgae to environmental stressors, which can be harnessed to optimize bioremediation strategies for the removal of organic pollutants like PYR.

The influence of benzene on the composition, diversity and performance of the anodic bacterial community in glucose-fed microbial fuel cells

Bioelectrochemical systems offer unique opportunities to remove recalcitrant environmental pollutants in a net positive energy process, although it remains challenging because of the toxic character of such compounds. In this study, microbial fuel cell (MFC) technology was applied to investigate the benzene degradation process for more than 160 days, where glucose was used as a co-metabolite and a control. We have applied an inoculation strategy that led to the development of 10 individual microbial communities. The electrochemical dynamics of MFC efficiency was observed, along with their 1H NMR metabolic fingerprints and analysis of the microbial community. The highest power density of 120 mW/m2 was recorded in the final period of the experiment when benzene/glucose was used as fuel. This is the highest value reported in a benzene/co-substrate system. Metabolite analysis confirmed the full removal of benzene, while the dominance of fermentation products indicated the strong occurrence of non-electrogenic reactions. Based on 16S rRNA gene amplicon sequencing, bacterial community analysis revealed several petroleum-degrading microorganisms, electroactive species and biosurfactant producers. The dominant species were recognised as Citrobacter freundii and Arcobacter faecis. Strong, positive impact of the presence of benzene on the alpha diversity was recorded, underlining the high complexity of the bioelectrochemically supported degradation of petroleum compounds. This study reveals the importance of supporting the bioelectrochemical degradation process with auxiliary substrates and inoculation strategies that allow the communities to reach sufficient diversity to improve the power output and degradation efficiency in MFCs beyond the previously known limits. This study, for the first time, provides an outlook on the syntrophic activity of biosurfactant producers and petroleum degraders towards the efficient removal and conversion of recalcitrant hydrophobic compounds into electricity in MFCs.

Bioremediation of hydrocarbon by co-culturing of biosurfactant-producing bacteria in microbial fuel cell with Fe2O3-modified anode

The most common type of environmental contamination is petroleum hydrocarbons. Sustainable and environmentally friendly treatment strategies must be explored in light of the increasing challenges of toxic and critical wastewater contamination. This paper deals with the bacteria-producing biosurfactant and their employment in the bioremediation of hydrocarbon-containing waste through a microbial fuel cell (MFC) with Pseudomonas aeruginosa (exoelectrogen) as co-culture for simultaneous power generation. Staphylococcus aureus is isolated from hydrocarbon-contaminated soil and is effective in hydrocarbon degradation by utilizing hydrocarbon (engine oil) as the only carbon source. The biosurfactant was purified using silica-gel column chromatography and characterised through FTIR and GCMS, which showed its glycolipid nature. The isolated strains are later employed in the MFCs for the degradation of the hydrocarbon and power production simultaneously which has shown a power density of 6.4 W/m3 with a 93% engine oil degradation rate. A biogenic Fe2O3 nanoparticle (NP) was synthesized using Bambusa arundinacea shoot extract for anode modification. It increased the power output by 37% and gave the power density of 10.2 W/m3. Thus, simultaneous hydrocarbon bioremediation from oil-contamination and energy recovery can be achieved effectively in MFC with modified anode.

Harnessing fungal bio-electricity: a promising path to a cleaner environment

Integrating fungi into fuel cell systems presents a promising opportunity to address environmental pollution while simultaneously generating energy. This review explores the innovative concept of constructing wetlands as fuel cells for pollutant degradation, offering a practical and eco-friendly solution to pollution challenges. Fungi possess unique capabilities in producing power, fuel, and electricity through metabolic processes, drawing significant interest for applications in remediation and degradation. Limited data exist on fungi's ability to generate electricity during catalytic reactions involving various enzymes, especially while remediating pollutants. Certain species, such as Trametes versicolor, Ganoderma lucidum, Galactomyces reessii, Aspergillus spp., Kluyveromyce smarxianus, and Hansenula anomala, have been reported to generate electricity at 1200 mW/m3, 207 mW/m2, 1,163 mW/m3, 438 mW/m3, 850,000 mW/m3, and 2,900 mW/m3, respectively. Despite the eco-friendly potential compared to conventional methods, fungi's role remains largely unexplored. This review delves into fungi's exceptional potential as fuel cell catalysts, serving as anodic or cathodic agents to mitigate land, air, and water pollutants while simultaneously producing fuel and power. Applications cover a wide range of tasks, and the innovative concept of wetlands designed as fuel cells for pollutant degradation is discussed. Cost-effectiveness may vary depending on specific contexts and applications. Fungal fuel cells (FFCs) offer a versatile and innovative solution to global challenges, addressing the increasing demand for alternative bioenergy production amid population growth and expanding industrial activities. The mechanistic approach of fungal enzymes via microbial combinations and electrochemical fungal systems facilitates the oxidation of organic substrates, oxygen reduction, and ion exchange membrane orchestration of essential reactions. Fungal laccase plays a crucial role in pollutant removal and monitoring environmental contaminants. Fungal consortiums show remarkable potential in fine-tuning FFC performance, impacting both power generation and pollutant degradation. Beyond energy generation, fungal cells effectively remove pollutants. Overall, FFCs present a promising avenue to address energy needs and mitigate pollutants simultaneously.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

Putting the electro-bugs to work: A systematic review of 22 years of advances in bio-electrochemical systems and the parameters governing their performance

Wastewater treatment using bioelectrochemical systems (BESs) can be considered as a technology finding application in versatile areas such as for renewable energy production and simultaneous reducing environmental problems, biosensors, and bioelectrosynthesis. This review paper reports and critically discusses the challenges, and advances in bio-electrochemical studies in the 21st century. To sum and critically analyze the strides of the last 20+ years on the topic, this study first provides a comprehensive analysis on the structure, performance, and application of BESs, which include Microbial Fuel Cells (MFCs), Microbial Electrolysis Cells (MECs) and Microbial Desalination Cells (MDCs). We focus on the effect of various parameters, such as electroactive microbial community structure, electrode material, configuration of bioreactors, anode unit volume, membrane type, initial COD, co-substrates and the nature of the input wastewater in treatment process and the amount of energy and fuel production, with the purpose of showcasing the modes of operation as a guide for future studies. The results of this review show that the BES have great potential in reducing environmental pollution, purifying saltwater, and producing energy and fuel. At a larger scale, it aspires to facilitate the path of achieving sustainable development and practical application of BES in real-world scenarios.

The Role of Fungal Fuel Cells in Energy Production and the Removal of Pollutants from Wastewater

Pure water, i.e., a sign of life, continuously circulates and is contaminated by different discharges. This emerging environmental problem has been attracting the attention of scientists searching for methods for the treatment of wastewater contaminated by multiple recalcitrant compounds. Various physical and chemical methods are used to degrade contaminants from water bodies. Traditional methods have certain limitations and complexities for bioenergy production, which motivates the search for new ways of sustainable bioenergy production and wastewater treatment. Biological strategies have opened new avenues to the treatment of wastewater using oxidoreductase enzymes for the degradation of pollutants. Fungal-based fuel cells (FFCs), with their catalysts, have gained considerable attention among scientists worldwide. They are a new, ecofriendly, and alternative approach to nonchemical methods due to easy handling. FFCs are efficiently used in wastewater treatment and the production of electricity for power generation. This article also highlights the construction of fungal catalytic cells and the enzymatic performance of different fungal species in energy production and the treatment of wastewater.

Using Sweet Sorghum Varieties for the Phytoremediation of Petroleum-Contaminated Salinized Soil: A Preliminary Study Based on Pot Experiments

Using energy plants to repair salinized soils polluted by petroleum is an efficient way to solve the problem of farmland reduction and prevent pollutants from entering the food chain simultaneously. In this study, pot experiments were conducted for the purposes of preliminarily discussing the potential of using an energy plant, sweet sorghum (Sorghum bicolor (L.) Moench), to repair petroleum-polluted salinized soils and obtain associated varieties with excellent remediation performance. The emergence rate, plant height and biomass of different varieties were measured to explore the performance of plants under petroleum pollution, and the removal of petroleum hydrocarbons in soil with candidate varieties was also studied. The results showed that the emergence rate of 24 of the 28 varieties were not reduced by the addition of 1.0 × 10⁴ mg/kg petroleum in soils with a salinity of 0.31%. After a 40-day treatment in salinized soil with petroleum additions of 1.0 × 10⁴ mg/kg, 4 potential well-performed varieties including Zhong Ketian No. 438, Ke Tian No. 24, Ke Tian No. 21 (KT21) and Ke Tian No. 6 with a plant height of >40 cm and dry weight of >4 g were screened. Obvious removal of petroleum hydrocarbons in the salinized soils planted with the four varieties were observed. Compared with the treatment without plants, the residual petroleum hydrocarbon concentrations in soils planted with KT21 decreased by 69.3%, 46.3%, 56.5%, 50.9% and 41.4%, for the additions of 0, 0.5 × 10⁴, 1.0 × 10⁴, 1.5 × 10⁴ and 2.0 × 10⁴ mg/kg, respectively. In general, KT21 had the best performance and application potential to remediate petroleum-polluted salinized soil.

Distribution, source, and health risk assessment of polycyclic aromatic hydrocarbons in the soils from a typical petroleum refinery area in south China

The ubiquity of polycyclic aromatic hydrocarbons (PAHs) in soils in petroleum refining areas is an important problem affecting human and ecological safety. In this study, 103 topsoil (0-0.50 m) samples were collected from a retired petroleum refinery area in Guangdong province, south China. The PAHs concentrations were determined by ultrasonic extraction and gas chromatography-mass spectrometry detection methods. Twelve PAHs controlled priority listed by the US Environmental Protection Agency (USEPA) were investigated. The results revealed that the concentration of Ʃ₁₂PAHs ranged from 2100 to 5200 µg kg^-1, with a mean value of 3741.66 µg kg^-1. The site was dominated by high rings PAHs (4-, 5-, and 6-ring), contributing 81.96% to Ʃ₁₂PAHs. The concentrations of 9 kinds of PAHs exceeded the Dutch soil quality standard. Besides, the PAHs were primarily distributed in the storage tank area and with high levels of contamination. The results of hierarchical cluster analysis (HCA) and principal component analysis (PCA) indicated that coal combustion was the source of PAHs in topsoil, followed by petroleum dripping and traffic emissions. The incremental lifetime cancer risk (ILCR) modeling illustrated that soil ingestion was the major pathway of PAH exposure for both adults and children. Notably, the total noncarcinogenic human health risk due to PAHs was within the limit of 1, while the carcinogenic risks alone caused by benzo(a)pyrene via soil ingestion to adults and children were obviously beyond the USEPA limit (1.00E -06). Therefore, PAHs in the petroleum refinery areas have potential carcinogenic hazards to human health, the area should be remediated before reuse.

Review on microbial fuel cells applications, developments and costs

The microbial fuel cell (MFC) technology has attracted significant attention in the last years due to its potential to recover energy in a wastewater treatment. The idea of using an MFC in industry is very attractive as the organic wastes can be converted into energy, reducing the waste disposal costs and the energy needs while increasing the company profit. However, taking aside these promising prospects, the attempts to apply MFCs in large-scale have not been succeeded so far since their lower performance and high costs remains challenging. This review intends to present the main applications of the MFC systems and its developments, particularly the advances on configuration and operating conditions. The diagnostic techniques used to evaluate the MFC performance as well as the different modeling approaches are described. Towards the introduction of the MFC in the market, a cost analysis is also included. The development of low-cost materials and more efficient systems, with high higher power outputs and durability, are crucial towards the application of MFCs in industrial/large scale. This work is a helpful tool for discovering new operation and design regimes.

Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy

Microbial fuel cell (MFC) is one of the promising alternative energy systems where the catalytic conversion of chemical energy into electrical energy takes places with the help of microorganisms. The basic configuration of MFC consists of three major components such as electrodes (anode and cathode), catalyst (microorganism) and proton transport/exchange membrane (PEM). MFC classified into four types based on the substrate utilized for the catalytic energy conversion process such as Liquid-phase MFC, Solid-phase MFC, Plant-MFC and Algae-MFC. The core performance of MFC is organic substrate oxidation and electron transfer. Microorganisms and electrodes are the key factors that decide the efficiency of MFC system for electricity generation. Microorganism catalysis degradation of organic matters and assist the electron transfer to anode surface, the conductivity of anode material decides the rate of electron transport to cathode through external circuit where electrons are reduced with hydrogen and form water with oxygen. Not limited to electricity generation, MFC also has diverse applications in different sectors including wastewater treatment, biofuel (biohydrogen) production and used as biosensor for detection of biological oxygen demand (BOD) of wastewater and different contaminants concentration in water. This review explains different types of MFC systems and their core performance towards energy conversion and waste management. Also provides an insight on different factors that significantly affect the MFC performance and different aspects of application of MFC systems in various sectors. The challenges of MFC system design, operations and implementation in pilot scale level and the direction for future research are also described in the present review.

Bioaugmentation of electrogenic halophiles in the treatment of pharmaceutical industrial wastewater and energy production in microbial fuel cell under saline condition

Pharmaceutical wastewater with different toxic recalcitrant materials and high salinity requires a novel treatment technology before released into the environment. The present research details the treatment of pharmaceutical wastewater along with energy production using bioaugmentation of halophilic consortium in air cathode microbial fuel cell (ACMFC) under saline condition (4%). Organic load (OL) varied from 1.04 to 3.51 gCOD/L was studied in ACMFC. TCOD (Total Chemical Oxygen Demand) removal exhibited 65%, 72%, 84% and 89% at 1.04, 1.52, 2.01 and 2.52 gCOD/L OL respectively. SCOD (Soluble Chemical Oxygen Demand) removal of 60%, 66%, 76% and 82% was recorded during the operation of identical OL (1.04-2.52 gCOD/L). Prominent TCOD (92%), SCOD (90%), TSS (Total Suspended Solids) removal of 73% was attained at 3.02 gCOD/L OL with corresponding energy production of 896 mV (Current density (CD) - 554 mA/m², Power density (PD)-505 mW/m²). CE (Columbic Efficiency) was 43%, 38%, 33%, 30%, 28% and 22% at different OL ranged between 1.04 and 3.51 gCOD/L. Increase in OL to 3.51 gCOD/L revealed decrement in TCOD (68%), SCOD (62%), TSS (52%) removal and energy production (CD-234 mA/m², PD-165 mW/m²). Complete removal of phenol was accomplished at different OL in 6 (1.04, 1.52 gCOD/L) and 8 (2.01, 2.52 and 3.02 gCOD/L) days respectively. Ochrobactrum, Marinobacter, Bacillus and Rhodococcus were the dominant halophilic electrogenic strain in ACMFC at different OL.

Novel continuous up-flow MFC for treatment of produced water: Flow rate effect, microbial community, and flow simulation

Produced water (PW) is the main waste produced by oil and gas industry, and its treatment represents an environmental and economical challenge for governments and the industry itself. Microbial fuel cells (MFC) emerge as an ecofriendly technology able to harvest energy and remove pollutants at the same time, however high internal resistance is a key problem limiting their operating performance and practical application. In this work, a novel continuous up-flow MFC was designed and fed solely using PW under different flowrates. Effects of the different flowrates (0 mL/s, 0.2 mL/s, 0.4 mL/s, and 0.6 mL/s) in power production performance and pollutants removal were analyzed. Our results demonstrated the removal efficiency of all the pollutants improved when flowrate incremented from 0 to 0.4 mL/s (COD: 96%, TDS: 22%, sulfates: 64%, TPH: 89%), but decreased when 0.6 mL/s was applied. The best power density of 227 mW/m² was achieved in a flowrate of 0.4 mL/s. Similar to the pollutant's removal, the power density increased together with the increment of flowrate and decreased when 0.6 mL/s was used. The reason for the performance fluctuation was the decrement of internal resistance from 80 Ω (batch mode) to 20 Ω (0.4 mL/s), and then the sudden increment to 90 Ω for 0.6 mL/s. A flow simulation revealed that until 0.4 mL/s the flow was organized and helped protons to arrive in the membrane faster, but flowrate of 0.6 mL/s created turbulence which prejudiced the transportation of protons incrementing the internal resistance. Microbial community analysis of the biofilm found that Desulfuromonas, Desulfovibrio and Geoalkalibacter were dominant bacteria in charge of pollutant removal and electricity production. This study can be helpful in guiding the use of continuous-flow MFC for PW treatment, and to accelerate the practical application of MFC technology in oil industry.

Microbial fuel cells for bioelectricity production from waste as sustainable prospect of future energy sector

Microbial fuel cell (MFC) is lauded for its potentials to solve both energy crisis and environmental pollution. Technologically, it offers the capability to harness electricity from the chemical energy stored in the organic substrate with no intermediate steps, thereby minimizes the entropic loss due to the inter-conversion of energy. The sciences underneath such MFCs include the electron and proton generation from the metabolic decomposition of the substrate by microbes at the anode, followed by the shuttling of these charges to cathode for electricity generation. While its promising prospects were mutually evinced in the past investigations, the upscaling of MFC in sustaining global energy demands and waste treatments is yet to be put into practice. In this context, the current review summarizes the important knowledge and applications of MFCs, concurrently identifies the technological bottlenecks that restricted its vast implementation. In addition, economic analysis was also performed to provide multiangle perspectives to readers. Succinctly, MFCs are mainly hindered by the slow metabolic kinetics, sluggish transfer of charged particles, and low economic competitiveness when compared to conventional technologies. From these hindering factors, insightful strategies for improved practicality of MFCs were formulated, with potential future research direction being identified too. With proper planning, we are delighted to see the industrialization of MFCs in the near future, which would benefit the entire human race with cleaner energy and the environment.

Reading the ground: Understanding the response of bioelectric microbes to anthropogenic compounds in soil based terrestrial microbial fuel cells

Electrogenic bacteria produce power in soil based terrestrial microbial fuel cells (tMFCs) by growing on electrodes and transferring electrons released from the breakdown of substrates. The direction and magnitude of voltage production is hypothesized to be dependent on the available substrates. A sensor technology was developed for compounds indicative of anthropological activity by exposing tMFCs to gasoline, petroleum, 2,4-dinitrotoluene, fertilizer, and urea. A machine learning classifier was trained to identify compounds based on the voltage patterns. After 5 to 10 days, the mean voltage stabilized (+/- 0.5 mV). After the entire incubation, voltage ranged from -59.1 mV to 631.8 mV, with the tMFCs containing urea and gasoline producing the highest (624 mV) and lowest (-9 mV) average voltage, respectively. The machine learning algorithm effectively discerned between gasoline, urea, and fertilizer with greater than 94% accuracy, demonstrating that this technology could be successfully operated as an environmental sensor for change detection.

Bioelectrochemical system as an innovative technology for treatment of produced water from oil and gas industry: A review

Disposal of the high volume of produced water (PW) is a big challenge to the oil and gas industry. High cost of conventional treatment facilities, increasing energy prices and environmental concern had focused governments and the industry itself on more efficient treatment methods. Bioelectrochemical system (BES) has attracted the attention of researchers because it represents a sustainable way to treat wastewater. This is the first review that summarizes the progress done in PW-fed BESs with a critical analysis of the parameters that influence their performances. Inoculum, temperature, hydraulic retention time, external resistance, and the use of real or synthetic produced water were found to be deeply related to the performance of BES. Microbial fuel cells are the most analyzed BES in this field followed by different types of microbial desalination cells. High concentration of sulfates in PW suggests that most of hydrocarbons are removed mainly by using sulfates as terminal electron acceptor (TEA), but other TEAs such as nitrate or metals can also be employed. The use of real PW as feed in experiments is highly recommended because biofilms when using synthetic PW are not the same. This review is believed to be helpful in guiding the research directions on the use of BES for PW treatment, and to speed up the practical application of BES technology in oil and gas industry.

Progress in microbial fuel cell technology for wastewater treatment and energy harvesting

The global energy crisis has stimulated the development of various forms of green energy technology such as microbial fuel cells (MFCs) that can be applied synergistically and simultaneously toward wastewater treatment and bioenergy generation. This is because electricigens in wastewater can act as catalysts for destroying organic pollutants to produce bioelectricity through bacterial metabolism. In this review, the factors affecting energy production are discussed to help optimize MFC processes with respect to design (e.g., single, double, stacked, up-flow, sediment, photosynthetic, and microbial electrolysis cells) and operational conditions/parameters (e.g., cell potential, microorganisms, substrate (in wastewater), pH, temperature, salinity, external resistance, and shear stress). The significance of electron transfer mechanisms and microbial metabolism is also described to pursue the maximum generation of power by MFCs. Technically, the generation of power by MFCs is still a significant challenge for real-world applications due to the difficulties in balancing between harvesting efficiency and upscaling of the system. This review summarizes various techniques used for MFC-based energy harvesting systems. This study aims to help narrow such gaps in their practical applications. Further, it is also expected to give insights into the upscaling of MFC technology while assisting environmental scientists to gain a better understanding on this energy harvesting approach.

Treatment of fish market wastewater and energy production using halophiles in air cathode microbial fuel cell

The present study is aimed to treat the fish market wastewater coupled with electricity production using halophiles in microbial fuel cell (MFC) technology under saline condition (4.6%). Halophilic consortium obtained from desalination plant brine water was used in the lab scale air cathode microbial fuel cell (ACMFC) reactor equipped with carbon brush and carbon cloth as anode and cathode. ACMFC (260 mL capacity) was operated with fish market saline wastewater at different organic load (OL) from 0.41 to 2.01 g COD/L with 20 day HRT (Hydraulic Retention Time). Total chemical oxygen demand (TCOD) removal at OL 0.41, 0.82 and 1.21 g COD/L was 68%, 77% and 84% in ACMFC. Correspondingly, soluble chemical oxygen demand (SCOD) removal was 63%, 74% and 81% respectively. The optimized OL for the treatment of fish market wastewater was 1.62 g COD/L, where the TCOD (90%), SCOD (88%), TSS (Total Suspended Solids) removal of 71% coupled with power generation of 902 mV (Power density 420 mW/m², Current density 550 mA/m²) was recorded. Columbic efficiency at OL 0.41 g COD/L was 56% and declined at OL 0.82, 1.21, 1.62 and 2.01 g COD/L to 48%, 39%, 29% and 17%. Increment in OL to 2.01 g COD/L revealed decrease in TCOD (64%), SCOD (60%), TSS (45%) removal and energy production. The bacterial strains present in the halophilic consortium were Ochrobactrum, Marinobacter, Bacillus, Rhodococcus, Flavobacterium, Alicyclobacillus, Pseudomonas, Martelella, Stenotrophomonas, Xanthobacter, and Microbacterium. High dominance of Ochrobactrum, Marinobacter and Bacillus was observed at optimized OL of 1.62 g COD/L in ACMFC. Further research on pilot scale MFC lead the way to technology transfer for the treatment of wastewater with corresponding energy production in industrial sector.

Immobilized Soybean Peroxidase Hybrid Biocatalysts for Efficient Degradation of Various Emerging Pollutants

In the present study, soybean peroxidase (SBP) was covalently immobilized onto two functionalized photocatalytic supports (TiO2 and ZnO) to create novel hybrid biocatalysts (TiO2-SBP and ZnO-SBP). Immobilization caused a slight shift in the pH optima of SBP activity (pH 5.0 to 4.0), whereas the free and TiO2-immobilized SBP showed similar thermal stability profiles. The newly developed hybrid biocatalysts were used for the degradation of 21 emerging pollutants in the presence and absence of 1-hydroxy benzotriazole (HOBT) as a redox mediator. Notably, all the tested pollutants were not equally degraded by the SBP treatment and some of the tested pollutants were either partially degraded or appeared to be recalcitrant to enzymatic degradation. The presence of HOBT enhanced the degradation of the pollutants, while it also inhibited the degradation of some contaminants. Interestingly, TiO2 and ZnO-immobilized SBP displayed better degradation efficiency of a few emerging pollutants than the free enzyme. Furthermore, a combined enzyme-chemical oxidation remediation strategy was employed to degrade two recalcitrant pollutants, which suggest a novel application of these novel hybrid peroxidase-photocatalysts. Lastly, the reusability profile indicated that the TiO2-SBP hybrid biocatalyst retained up to 95% degradation efficiency of a model pollutant (2-mercaptobenzothiazole) after four consecutive degradation cycles.

Electrochemical performance and response of bacterial community during phenanthrene degradation in single-chamber air-cathode microbial fuel cells

Polycyclic aromatic hydrocarbons have attracted considerable attention for their carcinogenic, teratogenic, and mutagenic properties in humans. Phenanthrene is one of the most abundant polycyclic aromatic hydrocarbons in aquatic environments. In this study, different concentrations of phenanthrene were degraded by single-chamber air-cathode microbial fuel cells. The electrochemical parameter of microbial fuel cells and biofilm changes on the anode were observed. The results showed that the addition of phenanthrene reduced the power output of the microbial fuel cell which affected the process of microbial electricity generation. Meanwhile, microorganisms destroyed the original structure of phenanthrene through anaerobic metabolism, and achieved good average degradation of 94.9-98.4%. Observation of the anodic biofilm found that the microbes had tolerance to phenanthrene and the biofilm exhibited to be well-constructed. Bacterial community distribution showed a decrease in the relative abundance of Acidovorax and Aquamicrobium, whereas the relative content of the main electroactive organism, Geobacter, increased by a factor of three. The results show that it is feasible for microbial fuel cells to biodegrade phenanthrene, and provide some references for the changes of microbial community during degradation process.

Substrate salinity: A critical factor regulating the performance of microbial fuel cells, a review

Substrate salinity is a critical factor influencing microbial fuel cells (MFCs) performance and various studies have suggested that increasing substrate salinity first improves MFC performance. However, a further increase in salinity that exceeds the salinity tolerance of exoelectrogens shows negative effects because of inhibited bacterial activity and increased activation losses. In this review, electricity generation and contaminant removal from saline substrates using MFCs are summarized, and results show different optimal salinities for obtaining maximum performance. Then, electroactive bacteria capable of tolerating saline environments and strategies for improving salinity tolerance are discussed. In addition to ohmic resistance and bacterial activity, membrane resistance and catalyst performance will also be affected by substrate salinity, all of which jointly contribute the final overall MFC performance. Therefore, the combined effect of salinity is analyzed to illustrate how the MFC performance changes with increasing salinity. Finally, the challenges and perspectives of MFCs operated in saline environments are discussed.

The effect of additional salinity on performance of a phosphate buffer saline buffered three-electrode bioelectrochemical system inoculated with wastewater

In bioelectrochemical system (BES), phosphate buffer saline (PBS) is usually used to achieve a suitable pH condition, which also increases electrolyte salinity. A series of factors that change with salinity will affect BES performance. To simplify the scenario, a three-electrode BES is used to investigate how additional salinity affects the performance of a 50 mM PBS-buffered BES. Results demonstrated that current production decreased with increasing salinity and the dominant exoelectrogens were not inhibited with the addition of 200 mM NaCl. The distribution of system resistance was analyzed by electrochemical impedance spectroscopy. Compared to the decreased solution and biofilm resistance, the increased interfacial resistance that accounted for up to 97.8% of total resistance was the dominant reason for the decreased current production with the increasing additional salinity. The effects of additional salinity on acetate degradation and columbic efficiency were also analyzed.

Allochthonous and Autochthonous Halothermotolerant Bioanodes From Hypersaline Sediment and Textile Wastewater: A Promising Microbial Electrochemical Process for Energy Recovery Coupled With Real Textile Wastewater Treatment

The textile and clothing industry is the first manufacture sector in Tunisia in terms of employment and number of enterprises. It generates large volumes of textile dyeing wastewater (TDWW) containing high concentrations of saline, alkaline, and recalcitrant pollutants that could fuel tenacious and resilient electrochemically active microorganisms in bioanodes of bioelectrochemical systems. In this study, a designed hybrid bacterial halothermotolerant bioanode incorporating indigenous and exogenous bacteria from both hypersaline sediment of Chott El Djerid (HSCE) and TDWW is proposed for simultaneous treatment of real TDWW and anodic current generation under high salinity. For the proposed halothermotolerant bioanodes, electrical current production, chemical oxygen demand (COD) removal efficiency, and bacterial community dynamics were monitored. All the experiments of halothermotolerant bioanode formation have been conducted on 6 cm² carbon felt electrodes polarized at -0.1 V/SCE and inoculated with 80% of TDWW and 20% of HSCE for 17 days at 45°C. A reproducible current production of about 12.5 ± 0.2 A/m² and a total of 91 ± 3% of COD removal efficiency were experimentally validated. Metagenomic analysis demonstrated significant differences in bacterial diversity mainly at species level between anodic biofilms incorporating allochthonous and autochthonous bacteria and anodic biofilm containing only autochthonous bacteria as a control. Therefore, we concluded that these results provide for the first time a new noteworthy alternative for achieving treatment and recover energy, in the form of a high electric current, from real saline TDWW.

Enhanced bioelectrochemical treatment of petroleum refinery wastewater with Labaneh whey as co-substrate

Petroleum refinery wastewater (PRW) that contains recalcitrant components as the major portion of constituents is difficult to treat by conventional biological processes. Microbial fuel cells (MFCs) which also produce renewable energy were found to be promising for the treatment of PRW. However, due to the high total dissolved solids and low organic matter content, the efficiency of the process is limited. Labaneh whey (LW) wastewater, having higher biodegradability and high organic matter was evaluated as co-substrate along with PRW in standard dual chambered MFC to achieve improved power generation and treatment efficiency. Among several concentrations of LW as co-substrate in the range of 5–30% (v/v) with PRW, 85:15 (PRW:LW) showed to have the highest power generation (power density (PD), 832 mW/m²), which is two times higher than the control with PRW as sole substrate (PD, 420 mW/m²). On the contrary, a maximum substrate degradation rate of 0.420 kg COD/m³-day (ξCOD, 63.10%), was registered with 80:20 feed. Higher LW ratios in PRW lead to the production of VFA which in turn gradually decreased the anolyte pH to below 4.5 (70:30 feed). This resulted in a drop in the performance of MFC with respect to power generation (274 mW/m², 70:30 feed) and substrate degradation (ξCOD, 17.84%).

Bioelectrochemical degradation of monoaromatic compounds: Current advances and challenges

Monoaromatic compounds (MACs) are typical refractory organic pollutants which are existing widely in various environments. Biodegradation strategies are benign while the key issue is the sustainable supply of electron acceptors/donors. Bioelectrochemical system (BES) shows great potential in this field for providing continuous electrons for MACs degradation. Phenol and BTEX (Benzene, Toluene, Ethylbenzene and Xylenes) can utilize anode to enhance oxidative degradation, while chlorophenols, nitrobenzene and antibiotic chloramphenicol (CAP) can be efficiently reduced to less-toxic products by the cathode. However, there still have several aspects need to be improved including the scale, electricity output and MACs degradation efficiency of BES. This review provides a comprehensive summary on the BES degradation of MACs, and discusses the advantages, future challenges and perspectives for BES development. Instead of traditional expensive dual-chamber configurations for MACs degradation, new single-chamber membrane-less reactors are cost-effective and the hydrogen generated from cathodes may promote the anode degradation. Electrode materials are the key to improve BES performance, approaches to increase the biofilm enrichment and conductivity of materials have been discussed, including surface modification as well as composition of carbon and metal-based materials. Besides, the development and introduction of functional microbes and redox mediators, participation of sulfur/hydrogen cycling may further enhance the BES versatility. Some critical parameters, such as the applied voltage and conductivity, can also affect the BES performance, which shouldn't be overlooked. Moreover, sequential cathode-anode cascaded mode is a promising strategy for MACs complete mineralization.

The oil removal and the characteristics of changes in the composition of bacteria based on the oily sludge bioelectrochemical system

Microbial fuel cell (MFC) technology is a simple way to accelerate the treatment of the oily sludge which is a major problem affecting the quality of oil fields and surrounding environment while generating electricity. To investigate the oil removal and the characteristics of changes in the composition of bacteria, sediment microbial fuel cells (SMFCs) supplemented with oily sludge was constructed. The results showed that the degradation efficiency of total petroleum hydrocarbon (TPH) of SMFC treatment was 10.1 times higher than the common anaerobic degradation. In addition, the degradation rate of n-alkanes followed the order of high carbon number > low carbon number > medium carbon number. The odd-even alkane predominance (OEP) increased, indicating that a high contribution of even alkanes whose degradation predominates. The OUT number, Shannon index, AEC index, and Chao1 index of the sludge treated with SMFC (YN2) are greater than those of the original sludge (YN1), showing that the microbial diversity of sludge increased after SMFC treatment. After SMFC treatment the relative abundance of Chloroflexi, Bacteroidia and Pseudomonadales which are essential for the degradation of the organic matter and electricity production increased significantly in YN2. These results will play a crucial role in improving the performance of oily sludge MFC.

Treatment of triethyl phosphate wastewater by Fenton oxidation and aerobic biodegradation

The conventional (i.e., aerobic biodegradation) and advanced (i.e., Fenton oxidation) treatment methods with implementation potentials were in parallel investigated for the treatment of industrial wastewater rich in organic phosphorus (Org.-P, dominated by triethyl phosphate (TEP)). Fenton effectively reduced Org.-P from 58 to 5 mg/L under the optimal reaction conditions of 20 mM H₂O₂, 14 mM Fe²⁺, pH 3.0, 120 mins' reaction time and the continuous dosing method (N = 4), following the first order kinetic model with a reaction rate constant of 0.07 min^-1. Nevertheless, the pretreatment prior to Fenton reaction (e.g., desalination) is recommended since high salinity significantly hindered TEP degradation, possibly due to the formation of Fe-Cl complexation and its scavenging effect to ∙OH. The Org.-P mineralization rate of ~98% was achieved by aerobic biodegradation. The excellent performance was maintained up to a salinity of 4.6% (w/w), higher than which the mineralization was seriously deteriorated. The high salinity could inhibit the microbial growth. This property might be responsible for the insufficient Org.-P removal during the on-site wastewater biological treatment. The Org.-P and COD concentrations were 6 and 405 mg/L respectively after the realistic wastewater treatment by biodegradation and coagulation, which meets with the municipal sewer discharge standard (GB/T 31962-2015).

Understanding the cumulative effects of salinity, temperature and inoculation size for the design of optimal halothermotolerant bioanodes from hypersaline sediments

The main objective of this study was to understand the interaction between salinity, temperature and inoculum size and how it could lead to the formation of efficient halothermotolerant bioanodes from the Hypersaline Sediment of Chott El Djerid (HSCE). Sixteen experiments on bioanode formation were designed using a Box-Behnken matrix and response surface methodology to understand synchronous interactions. All bioanode formations were conducted on 6 cm² carbon felt electrodes polarized at -0.1 V/SCE and fed with lactate (5 g/L) at pH 7.0. Optimum levels for salinity, temperature and inoculum size were predicted by NemrodW software as 165 g/L, 45 °C and 20%, respectively, under which conditions maximum current production of 6.98 ± 0.06 A/m² was experimentally validated. Metagenomic analysis of selected biofilms indicated a relative abundance of the two phyla Proteobacteria (from 85.96 to 89.47%) and Firmicutes (from 61.90 to 68.27%). At species level, enrichment of Psychrobacter aquaticus, Halanaerobium praevalens, Psychrobacter alimentaris, and Marinobacter hydrocarbonoclasticus on carbon-based electrodes was correlated with high current production, high salinity and high temperature. Members of the halothermophilic bacteria pool from HSCE, individually or in consortia, are candidates for designing halothermotolerant bioanodes applicable in the bioelectrochemical treatment of industrial wastewater at high salinity and temperature.

Factors affecting the efficiency of a bioelectrochemical system: a review

The great potential of bioelectrochemical systems (BESs) in pollution control combined with energy recovery has attracted increasing attention.

Excellent Degradation Performance of a Versatile Phthalic Acid Esters-Degrading Bacterium and Catalytic Mechanism of Monoalkyl Phthalate Hydrolase

Despites lots of characterized microorganisms that are capable of degrading phthalic acid esters (PAEs), there are few isolated strains with high activity towards PAEs under a broad range of environmental conditions. In this study, Gordonia sp. YC-JH1 had advantages over its counterparts in terms of di(2-ethylhexyl) phthalate (DEHP) degradation performance. It possessed an excellent degradation ability in the range of 20–50 °C, pH 5.0–12.0, or 0–8% NaCl with the optimal degradation condition 40 °C and pH 10.0. Therefore, strain YC-JH1 appeared suitable for bioremediation application at various conditions. Metabolites analysis revealed that DEHP was sequentially hydrolyzed by strain YC-JH1 to mono(2-ethylhexyl) phthalate (MEHP) and phthalic acid (PA). The hydrolase MphG1 from strain YC-JH1 hydrolyzed monoethyl phthalate (MEP), mono-n-butyl phthalate (MBP), mono-n-hexyl phthalate (MHP), and MEHP to PA. According to molecular docking and molecular dynamics simulation between MphG1 and monoalkyl phthalates (MAPs), some key residues were detected, including the catalytic triad (S125-H291-D259) and the residues R126 and F54 potentially binding substrates. The mutation of these residues accounted for the reduced activity. Together, the mechanism of MphG1 catalyzing MAPs was elucidated, and would shed insights into catalytic mechanism of more hydrolases.

Factors Affecting the Effectiveness of Bioelectrochemical System Applications: Data Synthesis and Meta-Analysis

Microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) are promising bioelectrochemical systems (BESs) for simultaneous wastewater treatment and energy/resource recovery. Unlike conventional fuel cells that are based on stable chemical reactions, these BESs are sensitive to environmental and operating conditions, such as temperature, pH, external resistance, etc. Substrate type, electrode material, and reactor configuration are also important factors affecting power generation in MFCs and hydrogen production in MECs. In order to discuss the influence of these above factors on the performance of MFCs and MECs, this study analyzes published data via data synthesis and meta-analysis. The results revealed that domestic wastewater would be more suitable for treatment using MFCs or MECs, due to their lower toxicity for anode biofilms compared to swine wastewater and landfill leachate. The optimal temperature was 25–35 °C, optimal pH was 6–7, and optimal external resistance was 100–1000 Ω. Although systems using carbon cloth as the electrodes demonstrated better performance (due to carbon cloth’s large surface area for microbial growth), the high prices of this material and other existing carbonaceous materials make it inappropriate for practical applications. To scale up and commercialize MFCs and MECs in the future, enhanced system performance and stability are needed, and could be possibly achieved with improved system designs.

Different Diversity and Distribution of Archaeal Community in the Aqueous and Oil Phases of Production Fluid From High-Temperature Petroleum Reservoirs

To get a better knowledge on how archaeal communities differ between the oil and aqueous phases and whether environmental factors promote substantial differences on microbial distributions among production wells, we analyzed archaeal communities in oil and aqueous phases from four high-temperature petroleum reservoirs (55–65°C) by using 16S rRNA gene based 454 pyrosequencing. Obvious dissimilarity of the archaeal composition between aqueous and oil phases in each independent production wells was observed, especially in production wells with higher water cut, and diversity in the oil phase was much higher than that in the corresponding aqueous phase. Statistical analysis further showed that archaeal communities in oil phases from different petroleum reservoirs tended to be more similar, but those in aqueous phases were the opposite. In the high-temperature ecosystems, temperature as an environmental factor could have significantly affected archaeal distribution, and archaeal diversity raised with the increase of temperature (p < 0.05). Our results suggest that to get a comprehensive understanding of petroleum reservoirs microbial information both in aqueous and oil phases should be taken into consideration. The microscopic habitats of oil phase, technically the dispersed minuscule water droplets in the oil could be a better habitat that containing the indigenous microorganisms.

Oxidoreductases for the remediation of organic pollutants in water - a critical review

Water contamination by various recalcitrant organic aromatic compounds is an emerging environmental issue that is increasingly attracting the attention of environmental scientists. A great majority of these recalcitrant pollutants are industrial wastes, textile dyes, pharmaceuticals, hormones, and personal care products that are discharged into wastewater. Not surprisingly, various chemical, physical, and biological strategies have been proposed and developed to remove and/or degrade these pollutants from contaminated water bodies. Biological approaches, specifically using oxidoreductase enzymes (such as peroxidases and laccases) for pollutant degradation are a relatively new and a promising research area that has potential advantages over other methods due to their higher efficiency and the ease of handling. This review focuses on the application of different classes of oxidoreductase enzymes to degrade various classes of organic pollutants. In addition to classifying these enzymes based on structural differences, the major factors that can affect their remediation ability, such as the class of peroxidases employed, pH, molecular structure of the pollutant, temperature, and the presence of redox mediators are also examined and discussed. Interestingly, a literature survey combined with our unpublished data suggests that "peroxidases" are a very heterogeneous and diverse family of enzymes and have different pH profiles, temperature optima, thermal stabilities, requirements for redox mediators, and substrate specificities as well as varying detoxification abilities. Additionally, remediation of real-life polluted samples by oxidoreductases is also highlighted as well as a critical look at current challenges and future perspectives.

Microbial fuel cells in saline and hypersaline environments: Advancements, challenges and future perspectives

This review is aimed to report the possibility to utilize microbial fuel cells for the treatment of saline and hypersaline solutions. An introduction to the issues related with the biological treatment of saline and hypersaline wastewater is reported, discussing the limitation that characterizes classical aerobic and anaerobic digestions. The microbial fuel cell (MFC) technology, and the possibility to be applied in the presence of high salinity, is discussed before reviewing the most recent advancements in the development of MFCs operating in saline and hypersaline conditions, with their different and interesting applications. Specifically, the research performed in the last 5years will be the main focus of this review. Finally, the future perspectives for this technology, together with the most urgent research needs, are presented.

Biodegradation of polycyclic aromatic hydrocarbons: Using microbial bioelectrochemical systems to overcome an impasse

Polycyclic aromatic hydrocarbons (PAHs) are hardly biodegradable carcinogenic organic compounds. Bioremediation is a commonly used method for treating PAH contaminated environments such as soils, sediment, water bodies and wastewater. However, bioremediation has various drawbacks including the low abundance, diversity and activity of indigenous hydrocarbon degrading bacteria, their slow growth rates and especially a limited bioavailability of PAHs in the aqueous phase. Addition of nutrients, electron acceptors or co-substrates to enhance indigenous microbial activity is costly and added chemicals often diffuse away from the target compound, thus pointing out an impasse for the bioremediation of PAHs. A promising solution is the adoption of bioelectrochemical systems. They guarantee a permanent electron supply and withdrawal for microorganisms, thereby circumventing the traditional shortcomings of bioremediation. These systems combine biological treatment with electrochemical oxidation/reduction by supplying an anode and a cathode that serve as an electron exchange facility for the biocatalyst. Here, recent achievements in polycyclic aromatic hydrocarbon removal using bioelectrochemical systems have been reviewed. This also concerns PAH precursors: total petroleum hydrocarbons and diesel. Removal performances of PAH biodegradation in bioelectrochemical systems are discussed, focussing on configurational parameters such as anode and cathode designs as well as environmental parameters like porosity, salinity, adsorption and conductivity of soil and sediment that affect PAH biodegradation in BESs. The still scarcely available information on microbiological aspects of bioelectrochemical PAH removal is summarised here. This comprehensive review offers a better understanding of the parameters that affect the removal of PAHs within bioelectrochemical systems. In addition, future experimental setups are proposed in order to study syntrophic relationships between PAH degraders and exoelectrogens. This synopsis can help as guide for researchers in their choices for future experimental designs aiming at increasing the power densities and PAH biodegradation rates using microbial bioelectrochemistry.

Electrobioremediation of oil spills

Annually, thousands of oil spills occur across the globe. As a result, petroleum substances and petrochemical compounds are widespread contaminants causing concern due to their toxicity and recalcitrance. Many remediation strategies have been developed using both physicochemical and biological approaches. Biological strategies are most benign, aiming to enhance microbial metabolic activities by supplying limiting inorganic nutrients, electron acceptors or donors, thus stimulating oxidation or reduction of contaminants. A key issue is controlling the supply of electron donors/acceptors. Bioelectrochemical systems (BES) have emerged, in which an electrical current serves as either electron donor or acceptor for oil spill bioremediation. BES are highly controllable and can possibly also serve as biosensors for real time monitoring of the degradation process. Despite being promising, multiple aspects need to be considered to make BES suitable for field applications including system design, electrode materials, operational parameters, mode of action and radius of influence. The microbiological processes, involved in bioelectrochemical contaminant degradation, are currently not fully understood, particularly in relation to electron transfer mechanisms. Especially in sulfate rich environments, the sulfur cycle appears pivotal during hydrocarbon oxidation. This review provides a comprehensive analysis of the research on bioelectrochemical remediation of oil spills and of the key parameters involved in the process.

Chitin degradation and electricity generation by Aeromonas hydrophila in microbial fuel cells

Chitin is one of the most abundant biopolymers in nature and the main composition of shrimp and crab shells (usually as food wastes). Thus it is essential to investigate the potential of degrading chitin for energy recovery. This study investigated the anaerobic degradation of chitin by Aeromonas hydrophila, a chitinolytic and popular electroactive bacterium, in both fermentation and microbial fuel cell (MFC) systems. The primary chitin metabolites produced in MFC were succinate, lactate, acetate, formate, and ethanol. The total metabolite concentration from chitin degradation increased seven-fold in MFC compared to the fermentation system, as well as additional electricity generation. Moreover, A. hydrophila degraded GlcNAc (the intermediate of chitin hydrolysis) significantly faster (0.97 and 0.94 mM C/d/mM-GlcNAc) than chitin (0.13 and 0.03 mM C/d/mM-GlcNAc) in MFC and fermentation systems, indicating that extracellular hydrolysis of chitin was the rate-limiting step and this step could be accelerated in MFC. Furthermore, more chemicals produced by the addition of exogenous mediators in MFC. This study proves that the chitin could be degraded effectively by an electroactive bacterium in MFC, and our results suggest that this bioelectrochemical system might be useful for the degradation of recalcitrant biomass to recover energy.